服务搜索 SEARCH
产品详情
BS EN标准翻译 - 中文版 1
TECERT标准翻译部凭藉我们对标准技术法规的专业理解,竭诚为您提供BS/BS EN中文标准翻译服务。联系我们:info@tecert.com。

BS ISO 12192:2002. Paper and board. Compressive strength. Ring crush method
BS ISO 12192:2011. Paper and board. Determination of compressive strength. Ring crush method
BS ISO 1219-2:2012. Fluid power systems and components. Graphical symbols and circuit diagramsCircuit diagrams
BS ISO 12197:1996. Woodruff keyseat cutters. Dimensions
BS ISO 12199:2000. Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet
BS ISO 12206:1995. Photography. Methods for the evaluation of the effectiveness of chemical conversion of silver images against oxidation
BS ISO 12214:2002. Road vehicles. Direction-of-motion stereotypes for automotive hand controls
BS ISO 12214:2010. Road vehicles. Direction-of-motion stereotypes for automotive hand controls
BS ISO 12218:1997. Graphic technology. Process control. Offset platemaking
BS ISO 12219-1:2012. Indoor air of road vehiclesWhole vehicle test chamber. Specification and method for the determination of volatile organic compounds in cabin interiors
BS ISO 12219-2:2012. Interior air of road vehiclesScreening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials. Bag method
BS ISO 12219-3:2012. Interior air of road vehiclesScreening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials. Micro-scale chamber method
BS ISO 12219-4:2013. Interior air of road vehiclesMethod for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials. Small chamber method
BS ISO 1222:2003. Photography. Tripod connections
BS ISO 1222:2010. Photography. Tripod connections
BS ISO 12222:1996. Cinematography. Manufacturer-printed, latent image identification on 16 mm, 35 mm, and 65 mm motion-picture film. Specifications and dimensions
BS ISO 12222:1998. Cinematography. Manufacturer-printed, latent image identification on 16 mm, 35 mm and 65 mm motion-picture film. Specifications and dimensions
BS ISO 12222:2000. Cinematography. Manufacturer-printed, latent image identification on 16 mm, 35 mm & 65 mm film. Specifications and dimensions
BS ISO 1223:1993. Cinematography. Picture areas for motion-picture films and slides for television. Position and dimensions
BS ISO 1223:2003. Cinematography. Picture areas for motion-picture films for television. Position and dimensions
BS ISO 12230:2012. Polybutene-1 (PB-1) pipes. Effect of time and temperature on the expected strength
BS ISO 12231:1997. Photography. Electronic still picture cameras. Terminology
BS ISO 12231:2005. Photography. Electronic still picture imaging. Vocabulary
BS ISO 12231:2012. Photography. Electronic still picture imaging. Vocabulary
BS ISO 12232:1998. Photography. Electronic still-picture cameras. Determination of ISO speed
BS ISO 12232:2006. Photography. Digital still cameras. Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index
BS ISO 12233:2000. Photography. Electronic still picture cameras. Resolution measurements
BS ISO 12234-1:2001. Electronic still-picture imaging. Removable memoryBasic removable-memory module
BS ISO 12234-1:2007. Electronic still-picture imaging. Removable memoryBasic removable-memory model
BS ISO 12234-1:2012. Electronic still-picture imaging. Removable memory Basic removable-memory model
BS ISO 12234-2:2001. Electronic still-picture imaging. Removable memoryTIFF/EP image data format
BS ISO 12238:2001. Pneumatic fluid power. Directional control valves. Measurement of shifting time
BS ISO 12240-1:1998. Spherical plain bearingsRadial spherical plain bearings
BS ISO 12240-2:1998. Spherical plain bearingsAngular contact radial spherical plain bearings
BS ISO 12240-3:1998. Spherical plain bearingsThrust spherical plain bearings
BS ISO 12240-4:1998. Spherical plain bearingsSpherical plain bearing rod ends
BS ISO 1224-1:2007. Rolling bearings. Instrument precision bearingsBoundary dimensions, tolerances and characteristics of metric series bearings
BS ISO 1224-2:2007. Rolling bearings. Instrument precision bearingsBoundary dimensions, tolerances and characteristics of inch series bearings
BS ISO 12242:2012. Measurement of fluid flow in closed conduits. Ultrasonic transit-time meters for liquid
BS ISO 12243:2003+A1:2012. Medical gloves made from natural rubber latex. Determination of water-extractable protein using the modified Lowry method
BS ISO 12251:2011. Diesel engines. Clamp mounted CR fuel injectors. Mounting dimensions
BS ISO 12256:2002. Aerospace. Drives, internal, cruciform, ribbed. Metric series
BS ISO 12257:2008. Aerospace. Internal six-lobe drives. Metric series
BS ISO 12273:2010. Aerospace. Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/ 315 °C and 900 MPa (at ambient temperature)/425 °C. Dimensions
BS ISO 12277:2000. Aerospace. Gang channel, self-locking, floating, standard series, with counterbore, classifications. 1100 MPa (at ambient temperature)/120°C, 1100 MPa (at ambient temperature)/235°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS ISO 12297:2012. Rolling bearings. Steel cylindrical rollers. Dimensions and tolerances
BS ISO 123:2001. Rubber latex. Sampling
BS ISO 1230:1992. Photography. Determination of flash guide numbers
BS ISO 1230:2007. Photography. Determination of flash guide numbers for electronic flash equipment
BS ISO 12301:2007. Plain bearings. Quality control techniques and inspection of geometrical and material quality characteristics
BS ISO 12303:1995. Plain bearings. Quality characteristics. Calculation of machine and process capabilities
BS ISO 12307-2:2000. Plain bearings. Checking of wrapped bushesChecking the inside diameter
BS ISO 12319:2006. Aerospace. 'P' (loop style) clamps. Procurement specification
BS ISO 12333:2000. Aerospace. Constant displacement hydraulic motors. General specifications for 35000 kPa systems
BS ISO 12334:2000. Aerospace. Hydraulic, pressure-compensated, variable delivery pumps. General requirements for 35000 kPa systems
BS ISO 12345:2002. Diesel engines. Cleanliness assessment of fuel injection equipment
BS ISO 12345:2013. Diesel engines. Cleanliness assessment of fuel injection equipment
BS ISO 12353-1:2002. Road vehicles. Traffic accident analysisVocabulary
BS ISO 12353-2:2003. Road vehicles. Traffic accident analysisGuidelines for the use of impact severity measures
BS ISO 12368:2001. Agricultural vehicles. Mechanical hook-type connections on towing vehicles. Test methods and requirements
BS ISO 12384:2010. Aerospace. Requirements for digital equipment for measurements of aircraft electrical power characteristics
BS ISO 124:2008. Latex, rubber. Determination of total solids content
BS ISO 124:2011. Latex, rubber. Determination of total solids content
BS ISO 12404:2011. Soil quality. Guidance on the selection and application of screening methods
BS ISO 12405-1:2011. Electrically propelled road vehicles. Test specification for lithium-ion traction battery packs and systemsHigh-power applications
BS ISO 12405-2:2012. Electrically propelled road vehicles. Test specification for lithium-ion traction battery packs and systemsHigh-energy applications
BS ISO 12406:2010. Surface chemical analysis. Secondary-ion mass spectrometry. Method for depth profiling of arsenic in silicon
BS ISO 1241:1996. Essential oils. Determination of ester values, before and after acetylation, and evaluation of the contents of free and total alcohols
BS ISO 12418-1:2012. Plastics. Post-consumer poly(ethylene terephthalate) (PET) bottle recyclatesDesignation system and basis for specifications
BS ISO 12418-2:2012. Plastics. Post-consumer poly(ethylene terephthalate) (PET) bottle recyclatesPreparation of test specimens and determination of properties
BS ISO 1242:1999. Essential oils. Determination of acid value
BS ISO 12472:2003. Fire resistance of timber door assemblies. Method of determining the efficacy of intumescent seals
BS ISO 12478-1:1998. Cranes. Maintenance manualGeneral
BS ISO 12488-1:2005. Cranes. Tolerances for wheels and travel and traversing tracksGeneral
BS ISO 12488-1:2012. Cranes. Tolerances for wheels and travel and traversing tracksGeneral
BS ISO 12488-4:2004. Cranes. Tolerances for wheels and travel and traversing tracksJib cranes
BS ISO 12490:2011. Petroleum and natural gas industries. Mechanical integrity and sizing of actuators and mounting kits for pipeline valves
BS ISO 12492:2012. Rubber, raw. Determination of water content by Karl Fischer method
BS ISO 12493:2011. Rubber, vulcanized. Determination of stress in tension upon heating
BS ISO 125:2003. Natural rubber latex concentrate. Determination of alkalinity
BS ISO 125:2011. Natural rubber latex concentrate. Determination of alkalinity
BS ISO 12500-1:2007. Filters for compressed air. Test methodsOil aerosols
BS ISO 12500-2:2007. Filters for compressed air. Test methodsOil vapours
BS ISO 12500-3:2009. Filters for compressed air. Test methodsParticulates
BS ISO 12500-4:2009. Filters for compressed air. Methods of testWater
BS ISO 12500-4:2009. Filters for compressed air. Methods of testWater CD-ROM
BS ISO 12573:2010. Aircraft. Tubing tolerances. Inch series
BS ISO 12575-1:2012. Thermal insulation. Exterior insulating systems for foundationsMaterial specification
BS ISO 12575-2:2007. Thermal insulation products. Exterior insulating systems for foundationsPrincipal responsibilities of installers
BS ISO 12576-2:2008. Thermal insulation products. Conformity control systemsIn-situ products
BS ISO 126:2005. Natural rubber latex concentrate. Determination of dry rubber content
BS ISO 12606:1997. Cinematography. Care and preservation of magnetic audio recordings for motion-pictures and television
BS ISO 12608:1996. Cinematography. Room and surround conditions for evaluating television display from telecine reproduction
BS ISO 12609-1:2013. Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applicationsSpecification for products
BS ISO 12609-2:2013. Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applicationsGuidance for use
BS ISO 12611:1997. Cinematography. Audio head tones for use in international exchange of 35 mm magnetic film masters. Specifications and location
BS ISO 12611:2004. Cinematography. Audio head tones for use in international exchange of 35 mm analogue magnetic film masters. Specifications and location
BS ISO 12612:1997. Cinematography. Interchange of post-production materials
BS ISO 12615:2004. Bibliographic references and source identifiers for terminology work
BS ISO 12616:2002. Translation-oriented terminography
BS ISO 12620:1999. Computer applications in terminology. Data categories
BS ISO 12620:2009. Terminology and other language and content resources. Specification of data categories and management of a data category registry for language resources
BS ISO 12634:1996. Graphic technology. Determination of tack of paste inks and vehicles by a rotary tackmeter
BS ISO 12635:1996. Graphic technology. Plates for offset printing. Dimensions
BS ISO 12635:2008. Graphic technology. Plates for offset printing. Dimensions
BS ISO 12636:1998. Graphic technology. Blankets for offset printing
BS ISO 12637-1:2006. Graphic technology. VocabularyFundamental terms
BS ISO 12637-2:1997. Graphic technology. Multilingual terminology of printing artsScreen printing terms
BS ISO 12637-2:2008. Graphic technology. VocabularyPrepress terms
BS ISO 12637-3:2009. Graphic technology. VocabularyPrinting terms
BS ISO 12637-4:2008. Graphic technology. VocabularyPostpress terms
BS ISO 12637-5:2001. Graphic technology. Multilingual terminology of printing artsScreen printing terms
BS ISO 12639:1998. Graphic technology. Prepress digital data exchange. Tag image file format for image technology (TIFF/IT)
BS ISO 12639:2004. Graphic technology. Prepress digital data exchange. Tag image file format for image technology (TIFF/IT)
BS ISO 12640:1997 (R03). Graphic technology. Prepress digital data exchange. CMYK standard colour image data (CMYK/SCID)
BS ISO 12640:1997. Graphic technology. Prepress digital data exchange. CMYK standard colour image data (CMYK/SCID)
BS ISO 12640-2:2004
BS ISO 12640-2:2004 (CD-ROM). Graphic technology. Prepress digital data exchangeXYZ/sRGB encoded standard colour image data (XYZ/SCID)
BS ISO 12640-2:2004. BSISO12640-2:2004 Graphic technology . Prepress digital data exchange . Part 2: XYZ/sRGB encoded standard colour image data (XYZ/SCID)
BS ISO 12640-2:2004. Graphic technology. Prepress digital data exchangeXYZ/sRGB encoded standard colour image data (XYZ/SCID)
BS ISO 12640-3:2007. Graphic technology. Prepress digital data exchangeCIELAB standard colour image data (CIELAB/SCID)
BS ISO 12640-4:2011. Graphic technology. Prepress digital data exchangeWide gamut display-referred standard colour image data [Adobe RGB (1998)/SCID]
BS ISO 12641:1997. Graphic technology. Prepress digital data exchange. Colour targets for input scanner calibration
BS ISO 12642:1996. Graphic technology. Prepress digital data exchange. Input data for characterization of 4-colour process printing
BS ISO 12642-1:2011. Graphic technology. Input data for characterization of four-colour process printingInitial data set
BS ISO 12642-2:2006. Graphic technology. Input data for characterization of 4-colour process printingExpanded data set
BS ISO 12643-1:2007. Graphic technology. Safety requirements for graphic technology equipment and systemsGeneral requirements
BS ISO 12643-1:2009. Graphic technology. Safety requirements for graphic technology equipment and systemsGeneral requirements
BS ISO 12643-2:2007. Graphic technology. Safety requirements for graphic technology equipment and systemsPress equipment and systems
BS ISO 12643-2:2010. Graphic technology. Safety requirements for graphic technology equipment and systemsPrepress and press equipment and systems
BS ISO 12643-3:2008. Graphic technology. Safety requirements for graphic technology equipment and systemsBinding and finishing equipment and systems
BS ISO 12643-3:2010. Graphic technology. Safety requirements for graphic technology equipment and systemsBinding and finishing equipment and systems
BS ISO 12643-4:2010. Graphic technology. Safety requirements for graphic technology equipment and systemsConverting equipment and systems
BS ISO 12643-5:2010. Graphic technology. Safety requirements for graphic technology equipment and systemsStand-alone platen presses
BS ISO 12644:1996. Graphic technology. Determination of rheological properties of paste inks and vehicles by the falling rod viscometer
BS ISO 12645:1998. Graphic technology. Process control. Certified reference material for opaque area calibration of transmission densitometers
BS ISO 12646:2008+A1:2010. Graphic technology. Displays for colour proofing. Characteristics and viewing conditions
BS ISO 12647-1:1996. Graphic technology. Process control for the manufacture of half-tone colour separations, proof and production prints.Parameters and measurement methods
BS ISO 12647-1:2004. Graphic technology. Process control for the production of half-tone colour separations, proof and production printsParameters and measurement methods
BS ISO 12647-2:1996. Graphic technology. Process control for the manufacture of half-tone colour separations, proof and production prints.Offset lithographic processes
BS ISO 12647-2:2004. Graphic technology. Process control for the production of half-tone colour separations, proof and production printsOffset lithographic processes
BS ISO 12647-3:1998. Graphic technology. Process control for the manufacture of half-tone colour separations, proof and production prints.Coldset offset lithography and letterpress on newsprint
BS ISO 12647-3:2005. Graphic technology. Process control for the production of half-tone colour separations, proofs and production printsColdset offset lithography on newsprint
BS ISO 12647-4:2005. Graphic technology. Process control for the production of half-tone colour separations, proofs and production printsPublication gravure printing
BS ISO 12647-5:2001. Graphic technology. Process control for the manufacture of half-tone colour separations, proof and production prints.Screen printing
BS ISO 12647-6:2006. Graphic technology. Process control for the production of half-tone colour separations, proofs and production printsFlexographic printing
BS ISO 12647-6:2012. Graphic technology. Process control for the production of half-tone colour separations, proofs and production printsFlexographic printing
BS ISO 12647-7:2007. Graphic technology. Process control for the production of half-tone colour separations, proof and production printsProofing processes working directly from digital data
BS ISO 12647-7:2013. Graphic technology. Process control for the production of half-tone colour separations, proof and production printsProofing processes working directly from digital data
BS ISO 12647-8:2012. Graphic technology. Process control for the production of half-tone colour separations, proof and production printsValidation print processes working directly from digital data
BS ISO 12648:2003. Graphic technology. Safety requirements for printing press systems
BS ISO 12648:2006. Graphic technology. Safety requirements for printing press systems
BS ISO 12649:2004. Graphic technology. Safety requirements for binding and finishing systems and equipment
BS ISO 12651:1999. Electronic imaging. Vocabulary
BS ISO 12651-1:2012. Electronic document management. VocabularyElectronic document imaging
BS ISO 12653-1:2000. Electronic imaging. Test target for the black-and-white scanning of office documentsCharacteristics
BS ISO 12653-2:2000. Electronic imaging. Test target for the black-and-white scanning of office documentsMethod of use
BS ISO 12655:2013. Energy performance of buildings. Presentation of measured energy use of buildings
BS ISO 12656:2001. Micrographics. Use of bar codes on aperture cards
BS ISO 12670:2011. Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions
BS ISO 12671:2012. Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings
BS ISO 12679:2011. Thermal spraying. Recommendations for thermal spraying
BS ISO 1268-1:2001. Fibre-reinforced plastics. Methods of producing test platesGeneral conditions
BS ISO 1268-10:2005. Fibre-reinforced plastics. Methods of producing test platesInjection moulding of BMC and other long-fibre compounds. General principles and moulding of multipurpose test specimens
BS ISO 1268-11:2005. Fibre-reinforced plastics. Methods of producing test platesInjection moulding of BMC and other long-fibre moulding compounds. Small plates
BS ISO 1268-2:2001. Fibre-reinforced plastics. Methods of producing test platesContact and spray-up moulding
BS ISO 1268-3:2000. Fibre-reinforced plastics. Methods of producing test platesWet compression moulding
BS ISO 1268-4:2005+A1:2010. Fibre-reinforced plastics. Methods of producing test platesMoulding of prepregs
BS ISO 1268-5:2001. Fibre-reinforced plastics. Methods of producing test platesFilament winding
BS ISO 12686:1999. Metallic and other inorganic coatings. Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish
BS ISO 1268-6:2002. Fibre-reinforced plastics. Methods of producing test platesPultrusion moulding
BS ISO 1268-7:2001. Fibre-reinforced plastics. Methods of producing test platesResin transfer moulding
BS ISO 1268-8:2004. Fibre-reinforced plastics. Methods of producing test platesCompression moulding of SMC and BMC
BS ISO 1268-9:2003. Fibre-reinforced plastics. Methods of producing test platesMoulding of GMT/STC
BS ISO 127:2012. Rubber, natural latex concentrate. Determination of KOH number
BS ISO 1271:1983. Essential oils. Determination of carbonyl value. Free hydroxylamine method
BS ISO 1272:2000. Essential oils. Determination of content of phenols
BS ISO 12739:2006. Zinc sulfide concentrates. Determination of zinc. Ion-exchange/EDTA titrimetric method
BS ISO 12742:2007. Copper, lead, and zinc sulfide concentrates. Determination of transportable moisture limits. Flow-table method
BS ISO 12743:2006. Copper, lead, zinc and nickel concentrates. Sampling procedures for determination of metal and moisture content
BS ISO 12744:2006. Copper, lead, zinc and nickel concentrates. Experimental methods for checking the precision of sampling
BS ISO 12745:2008. Copper, lead and zinc ores and concentrates. Precision and bias of mass measurement techniques
BS ISO 12749-2:2013. Nuclear energy, nuclear technologies, and radiological protection. VocabularyRadiological protection
BS ISO 1275:1995. Double-pitch precision roller chains and sprockets for transmission and conveyors
BS ISO 1275:2006. Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors
BS ISO 12759:2010+A1:2013. Fans. Efficiency classification for fans
BS ISO 12771:1997. Plastics laboratory ware. Disposable serological pipettes
BS ISO 12772:1997. Laboratory glassware. Disposable microhaematocrit capillary tubes
BS ISO 12775:1997. Guidelines on types of glass of normal bulk-production composition and their test methods
BS ISO 12776:2008. Pallets. Slip sheets
BS ISO 12787:2011. Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
BS ISO 12789:2000. Reference neutron radiations. Characteristics and methods of production of simulated workplace neutron fields
BS ISO 12789-1:2008. Reference radiation fields. Simulated workplace neutron fieldsCharacteristics and methods of production
BS ISO 12789-2:2008. Reference radiation fields. Simulated workplace neutron fieldsCalibration fundamentals related to the basic quantities
BS ISO 1279:1996. Essential oils. Determination of carbonyl value. Potentiometric methods using hydroxylammonium chloride
BS ISO 12794:2000. Nuclear energy. Radiation protection. Individual thermoluminescence dosemeters for extremities and eyes
BS ISO 128:1982. Technical drawings. General principles of presentation
BS ISO 12809:2011. Crop protection equipment. Reciprocating positive displacement pumps and centrifugal pumps. Test methods
BS ISO 12815:2013. Fibre-reinforced plastic composites. Determination of plain-pin bearingstrength
BS ISO 128-15:2013. Technical product documentation (TPD). General principles of presentationPresentation of shipbuilding drawings
BS ISO 12817:2013. Fibre-reinforced plastic composites. Determination of open-hole compression strength
BS ISO 12818:2013. Glass packaging. Standard tolerances for flaconnage
BS ISO 12819:1999. Methods of evaluation of the lifetime of a battery-powered watch
BS ISO 12819:2009. Methods of evaluation of the battery life of a battery-powered watch
BS ISO 128-22:1999. Technical drawings. General principles of presentationBasic conventions and applications for leader lines and reference lines
BS ISO 128-23:1999. Technical drawings. General principles of presentationLines on construction drawings
BS ISO 128-24:1999. Technical drawings. General principles of presentationLines on mechanical engineering drawings
BS ISO 128-25:1999. Technical drawings. General principles of presentationLines on shipbuilding drawings
BS ISO 12828-1:2011. Validation method for fire gas analysisLimits of detection and quantification
BS ISO 128-30:2001. Technical drawings. General principles of presentationBasic conventions for views
BS ISO 12830:2011. Paper, board and pulps. Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium
BS ISO 128-34:2001. Technical drawings. General principles of presentationViews on mechanical engineering drawings
BS ISO 128-40:2001. Technical drawings. General principles of presentationBasic conventions for cuts and sections
BS ISO 128-44:2001. Technical drawings. General principles of presentationSections on mechanical engineering drawings
BS ISO 128-50:2001. Technical drawings. General principles of presentationBasic conventions for representing areas on cuts and sections
BS ISO 12871:2010. Olive oils and olive-pomace oils. Determination of aliphatic alcohols content by capillary gas chromatography
BS ISO 12872:2010. Olive oils and olive-pomace oils. Determination of the 2-glyceryl monopalmitate content
BS ISO 12873:2010. Olive oils and olive-pomace oils. Determination of wax content by capillary gas chromatography
BS ISO 12875:2011. Traceability of finfish products. Specification on the information to be recorded in captured finfish distribution chains
BS ISO 12877:2011. Traceability of finfish products. Specification on the information to be recorded in farmed finfish distribution chains
BS ISO 12878:2012. Environmental monitoring of the impacts from marine finfish farms on soft bottom
BS ISO 12891-1:2011. Implants for surgery. Retrieval and analysis of surgical implantsRetrieval and handling
BS ISO 129:1985. Technical drawings. Dimensioning. General principles, definitions, methods of execution and special indications
BS ISO 129-1:2004. Technical drawings. Indication of dimensions and tolerancesGeneral principles
BS ISO 12917-1:2002. Petroleum and liquid petroleum products. Calibration of horizontal cylindrical tanksManual methods
BS ISO 12917-2:2002. Petroleum and liquid petroleum products. Calibration of horizontal cylindrical tanksInternal electro-optical distance-ranging method
BS ISO 12924:2010. Lubricants, industrial oils and related products (Class L). Family X (Greases). Specification
BS ISO 12925-1:1996. Lubricants, industrial oils and related products (class L). Family C (Gears)Specifications for lubricants for enclosed gear systems
BS ISO 12926:2012. Aluminium fluoride for industrial use. Determination of trace elements. Wavelength dispersive X-ray fluorescence spectrometric method using pressed powder tablets
BS ISO 12931:2012. Performance criteria for authentication solutions used to combat counterfeiting of material goods
BS ISO 129-4:2013. Technical product documentation (TPD). Indication of dimensions and tolerancesDimensioning of shipbuilding drawings
BS ISO 12965:2000. Butadiene rubber. Determination of microstructure by infra-red spectrometry
BS ISO 12986-2:2005. Carbonaceous materials used in the production of aluminium. Prebaked anodes and cathode blocksDetermination of flexural strength by the four-point method
BS ISO 12987:2004. Carbonaceous materials for the production of aluminium. Anodes, cathodes blocks, sidewall blocks and baked ramming pastes. Determination of the thermal conductivity using a comparative method
BS ISO 12988-2:2004. Carbonaceous materials used in the production of aluminium. Baked anodes. Determination of the reactivity to carbon dioxideThermogravimetric method
BS ISO 12989-2:2004. Carbonaceous materials used in the production of aluminium. Baked anodes and sidewall blocks. Determination of the reactivity to airThermogravimetric method
BS ISO 12991:2012. Liquefied natural gas (LNG). Tanks for on-board storage as a fuel for automotive vehicles
BS ISO 12992:1995. Plastics. Vertical flame spread determination for film and sheet
BS ISO 13003:2003. Fibre-reinforced plastics. Determination of fatigue properties under cyclic loading conditions
BS ISO 13007-1:2010. Ceramic tiles. Grouts and adhesivesTerms, definitions and specifications for adhesives
BS ISO 13007-2:2010. Ceramic tiles. Grouts and adhesivesTest methods for adhesives
BS ISO 13007-3:2010. Ceramic tiles. Grouts and adhesivesTerms, definitions and specifications for grouts
BS ISO 13007-4:2010. Ceramic tiles. Grouts and adhesivesTest methods for grouts
BS ISO 13007-4:2013. Ceramic tiles. Grouts and adhesivesTest methods for grouts
BS ISO 13008:2012. Information and documentation. Digital records conversion and migration process
BS ISO 13012:1998. Rolling bearings, linear motion, recirculating ball, sleeve type. Accessories
BS ISO 13012-1:2009. Rolling bearings. Accessories for sleeve type linear ball bearingsBoundary dimensions and tolerances for series 1 and 3
BS ISO 13012-2:2009. Rolling bearings. Accessories for sleeve type linear ball bearingsBoundary dimensions and tolerances for series 5
BS ISO 1302:1992. Technical drawings. Method of indicating surface texture
BS ISO 13033:2013. Bases for design of structures. Loads, forces and other actions. Seismic actions on nonstructural components for building applications
BS ISO 1304:2006. Rubber compounding ingredients. Carbon black. Determination of iodine adsorption number
BS ISO 13041-1:2004. Test conditions for numeriaclly controlled turning machines and turning centresGeometric tests for machines with a horizontal workholding spindle
BS ISO 13041-2:2008. Test conditions for numerically controlled turning machines and turning centresGeometric tests for machines with a vertical workholding spindle
BS ISO 13041-3:2009. Test conditions for numerically controlled turning machines and turning centresGeometric tests for machines with inverted vertical workholding spindles
BS ISO 13041-4:2004. Test conditions for numerically controlled turning machines and turning centresAccuracy and repeatability of positioning of linear and rotary axes
BS ISO 13041-5:2006. Test conditions for numerically controlled turning machines and turning centresAccuracy of feeds, speeds and interpolations
BS ISO 13041-6:2005. Test conditions for numerically controlled turning machines and turning centresAccuracy of a finished test piece
BS ISO 13041-6:2009. Test conditions for numerically controlled turning machines and turning centresAccuracy of a finished test piece
BS ISO 13041-7:2004. Test conditions for numerically controlled turning machines and turning centresEvaluation of contouring performance in the coordinate planes
BS ISO 13041-8:2004. Test conditions for numerically controlled turning machines and turning centresEvaluation of thermal distortions
BS ISO 13043:2011. Road vehicles. Refrigerant systems used in mobile air conditioning systems (MAC). Safety requirements
BS ISO 13044-1:2012. Road vehicles. 24 V fully automatic coupling systems (FACS) for heavy commercial vehicle combinationsGeneral requirements and definitions
BS ISO 13044-2:2013. Road vehicles. Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations50 mm fifth wheel couplings. Electrical and pneumatic interface
BS ISO 13050:1999. Curvilinear toothed synchronous belt drive systems
BS ISO 13052:2013. Road vehicles. Trailers up to 3,5 t. Requirements for jockey wheels and drawbar supports
BS ISO 13053-1:2011. Quantitative methods in process improvement. Six SigmaDMAIC methodology
BS ISO 13053-2:2011. Quantitative methods in process improvement. Six SigmaTools and techniques
BS ISO 13063:2012. Electrically propelled mopeds and motorcycles. Safety specifications
BS ISO 13064-1:2012. Battery-electric mopeds and motorcycles. PerformanceReference energy consumption and range
BS ISO 13064-2:2012. Battery-electric mopeds and motorcycles. PerformanceRoad operating characteristics
BS ISO 13067:2011. Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
BS ISO 13073-1:2012. Ships and marine technology. Risk assessment on anti-fouling systems on shipsMarine environmental risk assessment method of biocidally active substances used for anti-fouling systems on ships
BS ISO 13073-2:2013. Ships and marine technology. Risk assessment on antifouling systems on shipsMarine environmental risk assessment method for antifouling systems on ships using biocidally active substances
BS ISO 13074:2012. Analogue quartz clocks. Fitting dimensions of movements to hands
BS ISO 13082:2011. Milk and milk products. Determination of the lipase activity of pregastric lipase preparation
BS ISO 13084:2011. Surface chemical analysis. Secondary-ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
BS ISO 13091-1:2001. Mechanical vibrations. Vibrotactile perception thresholds for the assessment of nerve dysfunctionMethods of measurement at the fingertips
BS ISO 13099-1:2012. Colloidal systems. Methods for zeta-potential determinationElectroacoustic and electrokinetic phenomena
BS ISO 13099-2:2012. Colloidal systems. Methods for zetapotential determinationOptical methods
BS ISO 13110:2012. Cigarettes. Determination of menthol in smoke condensates. Gas-chromatographic method
BS ISO 13122:2011. Ships and marine technology. Launching appliances for davit-launched liferafts
BS ISO 13124:2011. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for interfacial bond strength of ceramic materials
BS ISO 13125:2013. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antifungal activity of semiconducting photocatalytic materials
BS ISO 13145:2012. Rubber. Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
BS ISO 13153:2012. Framework of the design process for energy-saving single-family residential and small commercial buildings
BS ISO 13160:2012. Water quality. Strontium 90 and strontium 89. Test methods using liquid scintillation counting or proportional counting
BS ISO 13163:2013. Water quality. Lead-210. Test method using liquid scintillation counting
BS ISO 13164-1:2013. Water quality. Radon-222General principles
BS ISO 13164-2:2013. Water quality. Radon-222Test method using gamma-ray spectrometry
BS ISO 13164-3:2013. Water quality. Radon-222Test method using emanometry
BS ISO 13165-1:2013. Water quality. Radium-226Test method using liquid scintillation counting
BS ISO 13175-3:2012. Implants for surgery. Calcium phosphatesHydroxyapatite and beta-tricalcium phosphate bone substitutes
BS ISO 13183:2012. Intelligent transport systems. Communications access for land mobiles (CALM). Using broadcast communications
BS ISO 13196:2013. Soil quality. Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
BS ISO 132:1999, BS 903-A10:1999. Rubber, vulcanized or thermoplastic. Determination of flex cracking and crack growth (De Mattia)
BS ISO 132:2005. Rubber, vulcanized or thermoplastic. Determination of flex cracking and crack growth (De Mattia)
BS ISO 132:2011. Rubber, vulcanized or thermoplastic. Determination of flex cracking and crack growth (De Mattia)
BS ISO 13202:2003. Cranes. Measurement of velocity and time parameters
BS ISO 13203:2006. Chains, sprockets and accessories. List of equivalent terms
BS ISO 13207-1:2012. Road vehicles. LED lamp characteristics for bulb compatible failure detectionLED lamps used as direction indicators
BS ISO 13209-1:2011. Road vehicles. Open test sequence exchange format (OTX)General information and use cases
BS ISO 13209-3:2012. Road vehicles. Open Test sequence eXchange format (OTX)Standard extensions and requirements
BS ISO 13215-1:2006. Road vehicles. Reduction of misuse risk of child restraint systemsForms for field studies
BS ISO 13215-2:1999. Road vehicles. Reduction of misuse risk of child restraint systemsRequirements and test procedures for correct installation (panel method)
BS ISO 13215-3:1999. Road vehicles. Reduction of misuse risk of child restraint systemsPrediction and assessment of misuse by misuse mode and effect analysis (MMEA)
BS ISO 13216-1:1999. Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systemsSeat bight anchorages and attachments
BS ISO 13216-2:2004. Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systemsTop tether anchorages and attachments
BS ISO 13216-3:2006. Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systemsClassification of child restraint dimensions and space in vehicle
BS ISO 13218:1998. Road vehicles. Child restraint systems. Report form for accidents involving child passengers
BS ISO 13226:1999. Rubber. Standard reference elastomers (SRE's) for characterizing the effect of liquids on vulcanized rubbers
BS ISO 13226:2005. Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
BS ISO 13226:2011. Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
BS ISO 13232-1:2005+A1:2012. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcyclesDefinitions, symbols and general considerations
BS ISO 13232-2:2005. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcyclesDefinition of impact conditions in relation to accident data
BS ISO 13232-3:2005+A1:2012. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcyclesMotorcyclist anthropometric impact dummy
BS ISO 13232-4:2005. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcyclesVariables to be measured, instrumentation and measurement procedures
BS ISO 13232-5:2005+A1:2012. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcyclesInjury indices and risk/benefit analysis
BS ISO 13232-6:2005+A1:2012. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcyclesFull-scale impact-test procedures
BS ISO 13232-7:2005+A1:2012. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcyclesStandardized procedures for performing computer simulations of motorcycle impact tests
BS ISO 13232-8:2005+A1:2012. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcyclesDocumentation and reports
BS ISO 13253:2011. Ducted air-conditioners and air-to-air heat pumps. Testing and rating for performance
BS ISO 13254:2010. Thermoplastics piping systems for non-pressure applications. Test method for watertightness
BS ISO 13255:2010. Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for airtightness of joints
BS ISO 13257:2010. Thermoplastics piping systems for non-pressure applications. Test method for resistance to elevated temperature cycling
BS ISO 13259:2010. Thermoplastics piping systems for underground non-pressure applications. Test method for leaktightness of elastomeric sealing ring type joints
BS ISO 13263:2010. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for impact strength
BS ISO 13264:2010. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for mechanical strength or flexibility of fabricated fittings
BS ISO 13265:2010. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Joints for buried non-pressure applications. Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
BS ISO 13267:2010. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics inspection chamber and manhole bases. Test methods for buckling resistance
BS ISO 13268:2010. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness
BS ISO 13270:2013. Steel fibres for concrete. Definitions and specifications
BS ISO 13271:2012. Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
BS ISO 1328-1:2013. Cylindrical gears. ISO system of flank tolerance classificationDefinitions and allowable values of deviations relevant to flanks of gear teeth
BS ISO 13284:2003. Fork-lift trucks. Fork-arm extensions and telescopic fork arms. Technical characteristics and strength requirements
BS ISO 13289:2011. Recreational diving services. Requirements for the conduct of snorkelling excursions
BS ISO 13291:2006. Zinc sulfide concentrates. Determination of zinc. Solvent extraction and EDTA titrimetric method
BS ISO 13292:2006. Copper, lead, zinc and nickel concentrates. Experimental methods for checking the bias of sampling
BS ISO 13296:1997. Diesel engines. High pressure fuel injection pipe assemblies. General requirements and dimensions
BS ISO 13296:2005. Diesel engines. High-pressure fuel injection pipe assemblies. General requirements and dimensions
BS ISO 13296:2012. Diesel engines. High-pressure fuel injection pipe assemblies. General requirements and dimensions
BS ISO 13300-1:2006. Sensory analysis. General guidance for the staff of a sensory evaluation laboratoryStaff responsibilities
BS ISO 13300-2:2006. Sensory analysis. General guidance for the staff of a sensory evaluation laboratoryRecruitment and training of panel leaders
BS ISO 13302:2003. Sensory analysis. Methods for assessing modifications to the flavour of foodstuffs due to packaging
BS ISO 13310:1997. Iron ores. Determination of zinc content. Flame atomic absorption spectrometric method
BS ISO 13311:1997. Iron ores. Determination of lead content. Flame atomic absorption spectrometric method
BS ISO 13312:1997. Iron ores. Determination of potassium content. Flame atomic absorption spectrometric method
BS ISO 13312:2006. Iron ores. Determination of potassium. Flame atomic absorption spectrometric method
BS ISO 13313:1997. Iron ores. Determination of sodium content. Flame atomic absorption spectrometric method
BS ISO 13313:2006. Iron ores. Determination of sodium. Flame atomic absorption spectrometric method
BS ISO 13314:2011. Mechanical testing of metals. Ductility testing. Compression test for porous and cellular metals
BS ISO 13317-1:2001. Determination of particle size distribution by gravitational liquid sedimentation methodsGeneral principles and guidelines
BS ISO 13317-2:2001. Determination of particle size distribution by gravitational liquid sedimentation methodsFixed pipette method
BS ISO 13317-3:2001. Determination of particle size distribution by gravitational liquid sedimentation methodsX-ray gravitational technique
BS ISO 13318-1:2001. Determination of particle size distribution by centrifugal liquid sedimentation methodsGeneral principles and guidelines
BS ISO 13318-2:2001. Determination of particle size distribution by centrifugal liquid sedimentation methodsPhotocentrifuge method
BS ISO 13318-2:2007. Determination of particle size distribution by centrifugal liquid sedimentation methodsPhotocentrifuge method
BS ISO 13318-3:2004. Determination of particle size distribution by centrifugal liquid sedimentation methodsCentrifugal X-ray method
BS ISO 13319:2000. Determination of particle size distributions. Electrical sensing zone method
BS ISO 13319:2007. Determination of particle size distributions. Electrical sensing zone method
BS ISO 13320:2009. Particle size analysis. Laser diffraction methods
BS ISO 13320-1:1999. Particle size analysis. Laser diffraction methodsGeneral principles
BS ISO 13322-1:2005. Particle size analysis. Image analysis methodsStatic image analysis methods
BS ISO 13322-2:2006. Particle size analysis. Image analysis methodsDynamic image analysis methods
BS ISO 13323-1:2000. Determination of particle size distribution. Single-particle light interaction methodsLight interaction considerations
BS ISO 13332:2000. Reciprocating internal combustion engines. Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
BS ISO 13344:1996. Determination of the lethal toxic potency of fire effluents
BS ISO 13344:2004. Estimation of the lethal toxic potency of fire effluents
BS ISO 13347-1:2004+A1:2010, BS 848-2.1:2004. Industrial fans. Determination of fan sound power levels under standardized laboratory conditions.General overview
BS ISO 13347-2:2004, BS 848-2.2:2004. Industrial fans. Determination of fan sound power levels under standardized laboratory conditionsReverberant room method
BS ISO 13347-3:2004+A1:2010, BS 848-2.3:2004. Industrial fans. Determination of fan sound power levels under standardized laboratory conditionsEnveloping surface methods
BS ISO 13347-4:2004, BS 848-2.4:2004. Industrial fans. Determination of fan sound power levels under standardized laboratory conditionsSound intensity method
BS ISO 13357-1:2002. Petroleum products. Determination of the filterability of lubricating oilsProcedure for oils in the presence of water
BS ISO 13357-2:2005. Petroleum products. Determination of the filterability of lubricating oilsProcedure for dry oils
BS ISO 13359:1998. Measurement of conductive liquid flow in closed conduits. Flanged electromagnetic flowmeters. Overall length
BS ISO 13362:2000. Flexible cellular polymeric materials. Determination of compression set under humid conditions
BS ISO 13363:2004. Rubber and plastics hoses for marine-engine wet-exhaust systems. Specification
BS ISO 13372:2004. Condition monitoring and diagnostics of machines. Vocabulary
BS ISO 13372:2012. Condition monitoring and diagnostics of machines. Vocabulary
BS ISO 13373-1:2002. Condition monitoring and diagnostics of machines. Vibration condition monitoringGeneral procedures
BS ISO 13373-2:2005. Condition monitoring and diagnostics of machines. Vibration condition monitoringProcessing, analysis and presentation of vibration data
BS ISO 13374-1:2003. Condition monitoring and diagnostics of machines. Data processing, communication and presentationGeneral guidelines
BS ISO 13374-2:2007. Condition monitoring and diagnostics of machines. Data processing, communication and presentationData processing
BS ISO 13374-3:2012. Condition monitoring and diagnostics of machines. Data processing, communication and presentationCommunication
BS ISO 13379:2003. Condition monitoring and diagnostics of machines. General guidelines on data interpretation and diagnostics techniques
BS ISO 13379-1:2012. Condition monitoring and diagnostics of machines. Data interpretation and diagnostics techniquesGeneral guidelines
BS ISO 13380:2002. Condition monitoring and diagnostics of machines. General guidelines on using performance parameters
BS ISO 13381-1:2004. Condition monitoring and diagnostics of machines. PrognosticsGeneral guidelines
BS ISO 13383-1:2012. Fine ceramics (advanced ceramics, advanced technical ceramics). Microstructural characterizationDetermination of grain size and size distribution
BS ISO 13383-2:2012. Fine ceramics (advanced ceramics, advanced technical ceramics). Microstructural characterizationDetermination of phase volume fraction by evaluation of micrographs
BS ISO 13399-1:2006+A1:2010. Cutting tool data representation and exchangeOverview, fundamental principles and general information model
BS ISO 13400-1:2011. Road vehicles. Diagnostic communication over internet protocol (DoIP)General information and use case definition
BS ISO 13400-2:2012. Road vehicles. Diagnostic communication over Internet Protocol (DoIP)Transport protocol and network layer services
BS ISO 13400-3:2011. Road vehicles. Diagnostic communication over Internet Protocol (DoIP)Wired vehicle interface based on IEEE 802.3
BS ISO 13404:2007. Prosthetics and orthotics. Categorization and description of external orthoses and orthotic components
BS ISO 13405-1:1996. Prosthetics and orthotics. Classification and description of prosthetic componentsClassification of prosthetic components
BS ISO 13405-2:1996. Prosthetics and orthotics. Classification and description of prosthetic componentsDescription of lower-limb prosthetic components
BS ISO 13405-3:1996. Prosthetics and orthotics. Classification and description of prosthetic componentsDescription of upper-limb prosthetic components
BS ISO 13408-7:2012. Aseptic processing of health care productsAlternative processes for medical devices and combination products
BS ISO 13419:2003. Space data and information transfer systems. Packet telemetry
BS ISO 13424:2013. Surface chemical analysis. X-ray photoelectron spectroscopy. Reporting of results of thin-film analysis
BS ISO 13435:2011. Textile machinery and accessories. Bars for drop wires for electrical warp stop motions
BS ISO 13444:2012. Technical product documentation (TPD). Dimensioning and indication of knurling
BS ISO 13448-1:2005. Acceptance sampling procedures based on the allocation of priorities principle (APP)Guidelines for the APP approach
BS ISO 13448-2:2004. Acceptance sampling procedures based on the allocation of priorities principles (APP)Coordinated single sampling plans for acceptance sampling by attributes
BS ISO 13450:1996. Photography. 110-size cartridge, film and backing paper. Dimensions
BS ISO 13457:2008. Agricultural irrigation equipment. Water-driven chemical injector pumps
BS ISO 13459:2012. Earth-moving machinery. Trainer seat. Deflection limiting volume, space envelope and performance requirements
BS ISO 13463:1999. Nuclear-grade plutonium dioxide powder for fabrication of light water reactor MOX fuel. Guidelines to help in the definition of a product specification
BS ISO 13470:2012. Trenchless applications of ductile iron pipes systems. Product design and installation
BS ISO 13472-1:2002. Acoustics. Measurement of sound absorption properties of road surfaces in situExtended surface method
BS ISO 13472-2:2010. Acoustics. Measurement of sound absorption properties of road surfaces in situSpot method for reflective surfaces
BS ISO 13473-2:2002. Characterization of pavement texture by use of surface profilesTerminology and basic requirements related to pavement texture profile analysis
BS ISO 13473-3:2002. Characterization of pavement texture by use of surface profilesSpecification and classification of profilometers
BS ISO 13474:2009. Acoustics. Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment
BS ISO 13475-1:1999. Acoustics. Stationary audible warning devices used outdoorsField measurements for determination of sound emission quantities
BS ISO 13476:1997. Road vehicles. Ignition coils. Electrical characteristics and test methods
BS ISO 13486-1:1999. Road vehicles. Hydraulic braking systemsDouble-flare pipes, tapped holes, male fittings and tube seats
BS ISO 13491-1:1998. Banking. Secure cryptographic devices (retail)Concepts, requirements and evaluation methods
BS ISO 13491-1:2007. Banking. Secure cryptographic devices (retail)Concepts, requirements and evaluation methods
BS ISO 13491-2:2000. Banking. Secure cryptographic devices (retail)Security compliance checklists for devices used in magnetic stripe cards systems
BS ISO 13491-2:2005. Banking. Secure cryptographic devices (retail)Security compliance checklists for devices used in financial transactions
BS ISO 13492:1998. Banking. Key management related data element (retail)
BS ISO 13492:2007. Financial services. Key management related data element. Application and usage of ISO 8583 data elements 53 and 96
BS ISO 13506:2008. Protective clothing against heat and flame. Test method for complete garments. Prediction of burn injury using an instrumented manikin
BS ISO 1352:2011. Metallic materials. Torque-controlled fatigue testing
BS ISO 13526:2010. Space data and information transfer systems. Tracking data message
BS ISO 13527:2010. Space data and information transfer systems. XML formatted data unit (XFDU) structure and construction rules
BS ISO 13528:2005. Statistical methods for use in proficiency testing by interlaboratory comparisons
BS ISO 13537:2010. Space data and information transfer systems. Reference architecture for space data systems
BS ISO 13541:2010. Space data and information transfer systems. Attitude data messages
BS ISO 13542:1995. Paper and board. Specification for internal diameters of cores for reels
BS ISO 13542:2006. Paper and board. Specification for internal diameters of cores for reels
BS ISO 13555-1:2003. Diesel engines. Procedure for checking the dynamic timing of diesel fuel injection equipmentPreconditioning
BS ISO 13555-2:2003. Diesel engines. Procedure for checking the dynamic timing of diesel fuel injection equipmentTest method
BS ISO 13555-3:2004. Diesel engines. Procedure for checking the dynamic timing of diesel fuel injection equipmentValidation of timing devices
BS ISO 13556:1998. Road vehicles. Localization of exhaust system leaks and equipment specifications
BS ISO 13562-1:2000. Industrial variable-reach trucksStability tests
BS ISO 13562-2:2001. Industrial variable-reach trucksAdditional stability tests for trucks handling freight containers of length 6m and above
BS ISO 13563-1:2001. Single side loading fork-lift trucksStability tests
BS ISO 13564-1:2012. Powered industrial trucks. Test methods for verification of visibilitySit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity
BS ISO 13573:2012. Corrosion of metals and alloys. Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials
BS ISO 13577-1:2012. Industrial furnaces and associated processing equipment. SafetyGeneral requirements
BS ISO 13579-1:2013. Industrial furnaces and associated processing equipment. Method of measuring energy balance and calculating efficiencyGeneral methodology
BS ISO 13579-2:2013. Industrial furnaces and associated processing equipment. Method of measuring energy balance and calculating efficiencyReheating furnaces for steel
BS ISO 13579-3:2013. Industrial furnaces and associated processing equipment. Method of measuring energy balance and calculating efficiencyBatch-type aluminium melting furnaces
BS ISO 13579-4:2013. Industrial furnaces and associated processing equipment. Method of measuring energy balance and calculating efficiencyFurnaces with protective or reactive atmosphere
BS ISO 13583-1:2000. Centrifugally cast steel and alloy productsGeneral testing and tolerances
BS ISO 13583-2:2003. Centrifugally cast steel and alloy productsHeat resistant materials
BS ISO 13584-20:1998. Industrial automation systems and integration. Parts libraryLogical resource. Logical model of expressions
BS ISO 13584-42:1998. Industrial automation systems and integration. Parts libraryDescription methodology: Methodology for structuring part families
BS ISO 13591:1997. Small craft. Portable fuel systems for outboard motors
BS ISO 13592:1998. Small craft. Backfire flame control for petrol engines
BS ISO 13606-2:2008. Health informatics. Electronic health record communicationArchetype interchange specification
BS ISO 1361:1997. Light-gauge metal containers. Round open-top cans. Internal diameters
BS ISO 13613:2011. Ships and marine technology. Maintenance and testing to reduce losses in critical systems for propulsion
BS ISO 13616:1997. Banking and related financial services. International bank account number (IBAN)
BS ISO 13616:2003. Banking and related financial services. International bank account number (IBAN)
BS ISO 13616-1:2007. Financial services. International bank account number (IBAN)Structure of the IBAN
BS ISO 13616-2:2007. Financial services. International bank account number (IBAN)Role and responsibilities of the registration authority
BS ISO 13617:2001. Ships and marine technology. Shipboard incinerators. Requirements
BS ISO 13628-11:2007. Petroleum and natural gas industries. Design and operation of subsea production systemsFlexible pipe systems for subsea and marine applications
BS ISO 13628-5:2002. Petroleum and natural gas industries. Design and operation of subsea production systemsSubsea umbilicals
BS ISO 13628-6:2000. Petroleum and natural gas industries. Design and operation of subsea production systemsDesign and operation of subsea controls
BS ISO 13636:2012. Plastics. Film and sheeting. Non-oriented poly(ethylene terephthalate) (PET) sheets
BS ISO 13640:1999. Building construction. Jointing products. Specifications for test substrates
BS ISO 13643-1:2013. Ships and marine technology. Manoeuvring of shipsGeneral concepts, quantities and test conditions
BS ISO 13643-2:2013. Ships and marine technology. Manoeuvring of shipsTurning and yaw checking
BS ISO 13643-3:2013. Ships and marine technology. Manoeuvring of shipsYaw stability and steering
BS ISO 13643-4:2013. Ships and marine technology. Manoeuvring of shipsStopping, acceleration, traversing
BS ISO 13643-5:2013. Ships and marine technology. Manoeuvring of shipsSubmarine specials
BS ISO 13643-6:2013. Ships and marine technology. Manoeuvring of shipsModel test specials
BS ISO 13651:1996. Plastics. Epoxy resins and related materials. Determination of total saponifiable chlorine
BS ISO 13653:1996. Optics and optical instruments. General optical test methods. Measurement of relative irradiance in the image field
BS ISO 13655:1996. Graphic technology. Spectral measurement and colorimetric computation for graphic arts images
BS ISO 13655:2009. Graphic technology. Spectral measurement and colorimetric computation for graphic arts images
BS ISO 13656:2000. Graphic technology. Application of reflection densitometry and colorimetry to process control or evaluation of prints and proofs
BS ISO 13674-1:2003. Road vehicles. Test method for the quantification of on-centre handlingWeave test
BS ISO 13674-1:2010. Road vehicles. Test method for the quantification of on-centre handlingWeave test
BS ISO 13674-2:2006. Road vehicles. Test method for the quantification of on-centre handlingTransition test
BS ISO 13678:2000. Petroleum and natural gas industries. Evaluation and testing of thread compounds for use with casing, tubing and line pipe
BS ISO 13689:2001. Refrigerated light hydrocarbon fluids. Measurement of liquid levels in tanks containing liquefied gases. Microwave-type level gauge
BS ISO 13693-1:2013. Irrigation equipment. Safety devices for chemigationSmall plastics valves for chemigation
BS ISO 13704:2001. Petroleum and natural gas industries. Calculation of heater-tube thickness in petroleum refineries
BS ISO 13713:2012. Ships and marine technology. Ship’s mooring and towing fittings. Mooring chocks
BS ISO 13715:2000. Technical drawings. Edges of undefined shape. Vocabulary and indications
BS ISO 13726:1998. Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm. Accessory mounting dimensions
BS ISO 13726:2008. Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm. Accessory mounting dimensions
BS ISO 13728:2012. Ships and marine technology. Ship’s mooring and towing fittings. Panama chocks
BS ISO 13729:2012. Ships and marine technology. Ship’s mooring and towing fittings. Closed chocks
BS ISO 13733:2012. Ships and marine technology. Ship’s mooring and towing fittings. Universal fairleads with upper roller
BS ISO 13737:2004, BS 2000-527:2004. Method of test for petroleum and its products. BS 2000-527. Petroleum products and lubricants. Determination of low-temperature cone penetration of lubricating greases
BS ISO 13738:2000, ISO 13738:2000. Lubricants, industrial oils and related products (class L). Family E (internal combustion engine oils). Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD)
BS ISO 13738:2011. Lubricants, industrial oils and related products (class L). Family E (Internal combustion engine oils). Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD)
BS ISO 13739:2010. Petroleum products. Procedures for transfer of bunkers to vessels CD-ROM
BS ISO 13740:1998. Crude petroleum and petroleum products. Transfer accountability. Assessment of vessel experience factor on loading (VEFL) and vessel experience factor on discharging (VEFD) of ocean-going tanker vessels
BS ISO 13741-1:1998. Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Determination of residual monomers and other organic components by capillary-column gas chromatographyDirect liquid injection method
BS ISO 13741-2:1998. Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Determination of residual monomers and other organic components by capillary-column gas chromatographyHeadspace method
BS ISO 13742:2012. Ships and marine technology. Ship’s mooring and towing fittings. Universal fairleads without upper roller
BS ISO 13746:2000. Textile floor coverings. Guidelines for installation and use on stairs
BS ISO 13752:1998. Air quality. Assessment of uncertainty of a measurement method under field conditions using a second method as reference
BS ISO 13755:2012. Ships and marine technology. Ship’s mooring and towing fittings. Steel rollers
BS ISO 13756:1997. Determination of silver in silver jewellery alloys. Volumetric (potentiometric) method using sodium chloride or potassium chloride
BS ISO 13765-1:2004. Refractory mortarsDetermination of consistency using the penetrating cone method
BS ISO 13765-2:2004. Refractory mortarsDetermination of consistency using the reciprocating flow table method
BS ISO 13765-3:2004. Refractory mortarsDetermination of joint stability
BS ISO 13765-4:2004. Refractory mortarsDetermination of flexural bonding strength
BS ISO 13765-5:2004. Refractory mortarsDetermination of grain size distribution (sieve analysis)
BS ISO 13765-6:2004. Refractory mortarsDetermination of the moisture content of ready-mixed mortars
BS ISO 13767:2012. Ships and marine technology. Ship’s mooring and towing fittings. Shipside roller fairleads
BS ISO 13772:1997. Forestry machinery. Portable chainsaws. Non-manually actuated chain brake performance
BS ISO 13772:2009. Forestry machinery. Portable chain-saws. Non-manually actuated chain brake performance
BS ISO 13774:1998. Rubber and plastics hoses for fuels for internal combustion engines. Method of test for flammability
BS ISO 13775-1:2000. Thermoplastic tubing and hoses for automotive useNon-fuel applications
BS ISO 13775-2:2000. Thermoplastic tubing and hoses for automotive usePetroleum-based fuel applications
BS ISO 13776:2012. Ships and marine technology. Ship’s mooring and towing fittings. Pedestal fairleads
BS ISO 13778:1999. Plain bearings. Quality assurance of thin-walled half bearings. Selective assembly of bearings to achieve a narrow clearance range
BS ISO 13779-1:2000. Impants for surgery. HydroxyapatiteCeramic hydroxyapatite
BS ISO 13779-1:2008. Implants for surgery. HydroxyapatiteCeramic hydroxyapatite
BS ISO 13779-2:2000. Impants for surgery. HydroxyapatiteCoatings of hydroxyapatite
BS ISO 13779-2:2008. Implants for surgery. HydroxyapatiteCoatings of hydroxyapatite
BS ISO 13779-3:2008. Implants for surgery. HydroxyapatiteChemical analysis and characterization of crystallinity and phase purity
BS ISO 13779-4:2002. Implants for surgery. HydroxyapatiteDetermination of coating adhesion strength
BS ISO 13794:1999. Ambient air. Determination of asbestos fibres. Indirect-transfer transmission electron microscopy method
BS ISO 13795:2012. Ships and marine technology. Ship’s mooring and towing fittings. Welded steel bollards for sea-going vessels
BS ISO 13797:2012. Ships and marine technology. Ship’s mooring and towing fittings. Cruciform bollards
BS ISO 13798:2012. Ships and marine technology. Ship’s mooring and towing fittings. Recessed bitts (Steel plate type)
BS ISO 13799:2012. Ships and marine technology. Ship’s mooring and towing fittings. Recessed bitts (Casting type)
BS ISO 13804:1999. Vitreous and porcelain enamels for aluminium. Production of specimens for testing
BS ISO 13806:1999. Vitreous and porcelain enamels. Corrosion tests in closed systems
BS ISO 1382:2002. Rubber. Vocabulary
BS ISO 1382:2008. Rubber. Vocabulary
BS ISO 1382:2012. Rubber. Vocabulary
BS ISO 13820:1996. Paper, board and corrugated fibreboard. Description and calibration of compression testing equipment
BS ISO 13821:2001. Corrugated fibreboard. Determination of edgewise crush resistance. Waxed edge method
BS ISO 13826:2013. Metallic and other inorganic coatings. Determination of thermal diffusivity of thermally sprayed ceramic coatings by laser flash method
BS ISO 13832:2013. Aerospace. Wire, aluminium alloy and copper-clad aluminium conductors. General performance requirements
BS ISO 13837:2008. Road vehicles. Safety glazing materials. Method for the determination of solar transmittance
BS ISO 13875:2005. Liquid milk. Determination of acid-soluble β-lactoglobulin content. Reverse-phase HPLC method
BS ISO 13879:1999. Petroleum and natural gas industries. Content and drafting of functional specifications
BS ISO 13880:1999. Petroleum and natural gas industries. Content and drafting of a technical specification
BS ISO 13885-1:2008. Binders for paints and varnishes. Gel permeation chromatography (GPC)Tetrahydrofuran (THF) as eluent
BS ISO 13887:2004. Cold-reduced steel sheet of higher yield strength with improved formability
BS ISO 13887:2011. Cold-reduced steel sheet of higher yield strength with improved formability
BS ISO 13894-1:2000. High-pressure decorative laminates. Composite elementsTest methods
BS ISO 13894-2:2005. High-pressure decorative laminates. Composite elementsSpecifications for composite elements with wood-based substrates for interior use
BS ISO 13899-2:2005. Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric methodDetermination of Nb Content
BS ISO 13909-1:2001. Hard coal and coke. Mechanical samplingGeneral introduction
BS ISO 13909-2:2001. Hard coal and coke. Mechanical samplingCoal. Sampling from moving streams
BS ISO 13909-3:2001. Hard coal and coke. Mechanical samplingCoal. Sampling from stationary lots
BS ISO 13909-4:2001. Hard coal and coke. Mechanical samplingCoal. Preparation of test samples
BS ISO 13909-5:2001. Hard coal and coke. Mechanical samplingCoke. Sampling from moving streams
BS ISO 13909-6:2001. Hard coal and coke. Mechanical samplingCoke. Preparation of test samples
BS ISO 13909-7:2001. Hard coal and coke. Mechanical samplingMethods for determining the precision of sampling, sample preparation and testing
BS ISO 13909-8:2001. Hard coal and coke. Mechanical samplingMethods of testing for bias
BS ISO 13921:2008. Aerospace. Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
BS ISO 13926-2:2011. Pen systemsPlunger stoppers for pen-injectors for medical use
BS ISO 13926-3:2012. Pen systemsSeals for pen-injectors for medical use
BS ISO 13930:2007. Iron ores for blast furnace feedstocks. Determination of low-temperature reduction-disintegration indices by dynamic method
BS ISO 13931:2013. Carbon fibre. Determination of volume resistivity
BS ISO 13939:2012. Foil bearings. Guidelines for testing of the performance of foil journal bearings. Testing of load capacity, friction coefficient and lifetime
BS ISO 13942:2000. Bonded abrasive products. Limit deviations and run-out tolerances
BS ISO 13947:2007. Metallic powders. Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
BS ISO 13947:2011. Metallic powders. Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
BS ISO 13948-2:2012. Diesel engines. Fuel injection pumps and fuel injector low-pressure connectionsNon-threaded (push-on) connections
BS ISO 13950:2007. Plastics pipes and fittings. Automatic recognition systems for electrofusion joints
BS ISO 13953:2001. Polyethelene (PE) pipes and fittings. Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
BS ISO 13956:2010. Plastics pipes and fittings. Decohesion test of polyethylene (PE) saddle fusion joints. Evaluation of ductility of fusion joint interface by tear test
BS ISO 13959:2009. Water for haemodialysis and related therapies
BS ISO 13964:1998. Air quality. Determination of ozone in ambient air. Ultraviolet photometric method
BS ISO 13970:2011. Recreational diving services. Requirements for the training of recreational snorkelling guides
BS ISO 13971:2012. Refrigeration systems and heat pumps. Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes. Requirements and classification
BS ISO 13975:2012. Plastics. Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems. Method by measurement of biogas production
BS ISO 13976:2005. Hot-rolled steel sheet in coils of structural quality and heavy thickness
BS ISO 13985:2006. Liquid hydrogen. Land vehicle fuel tanks
BS ISO 13988:2008. Passenger vehicle wheels. Clip balance weight and rim flange nomenclature, test procedures and performance requirements
BS ISO 13990-1:2006. Textile machinery and accessories. Yarn feeders and yarn control for knitting machinesVocabulary
BS ISO 13990-2:2006. Textile machinery and accessories. Yarn feeders and yarn control for knitting machinesConnecting dimensions for yarn feeders and yarn control devices
BS ISO 13990-3:2006. Textile machinery and accessories. Yarn feeders and yarn control for knitting machinesDimensions for connecting and interconnection cables
BS ISO 13994:1998. Clothing for protection against liquid chemicals. Determination of the resistance of protective clothing materials to penetration by liquids under pressure
BS ISO 13999-1:1999. Protective clothing. Gloves and arm guards protecting against cuts and stabs by hand knivesChain-mail gloves and arm guards
BS ISO 14004:1996. Environmental management systems. General guidelines on principles, systems and supporting techniques
BS ISO 14050:1998. Environmental management. Vocabulary
BS ISO 14050:2002. Environmental management. Vocabulary
BS ISO 14066:2011. Greenhouse gases. Competence requirements for greenhouse gas validation teams and verification teams
BS ISO 1407:2009. Rubber. Determination of solvent extract
BS ISO 1407:2011. Rubber. Determination of solvent extract
BS ISO 1409:2006. Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic) Determination of surface tension by the ring method
BS ISO 14117:2012. Active implantable medical devices. Electromagnetic compatibility. EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices
BS ISO 14127:2008. Carbon-fibre-reinforced composites. Determination of the resin, fibre and void contents
BS ISO 14132-5:2008. Optics and photonics. Vocabulary for telescopic systemsTerms for night vision systems
BS ISO 14133-1:2006. Optics and optical instruments. Specifications for binoculars, monoculars and spotting scopesGeneral purpose instruments
BS ISO 14133-2:2006. Optics and optical instruments. Specifications for binoculars, monoculars and spotting scopesHigh performance instruments
BS ISO 14134:2006. Optics and optical instruments. Specifications for astronomical telescopes
BS ISO 14135-1:2003. Optics and optical instruments. Specification for telescopic sightsGeneral-purpose instruments
BS ISO 14135-2:2003. Optics and optical instruments. Specification for telescopic sightsHigh-performance instruments
BS ISO 14137:2000. Machine tools. Test conditions for wire electrical-discharge machines (wire EDM). Terminology and testing of the accuracy
BS ISO 14139:2000. Hydrometric determinations. Flow measurements in open channels using structures. Compound gauging structures
BS ISO 14152:2001. Neutron radiation protection shielding. Design principles and considerations for the choice of appropriate materials
BS ISO 14154:2005. Soil quality. Determination of some selected chlorophenols. Gas-chromatographic method with electron-capture detection
BS ISO 14156:2001+A1:2007. Milk and milk products. Extraction methods for lipids and liposoluble compounds
BS ISO 14164:1999. Stationary source emissions. Determination of the volume flowrate of gas streams in ducts. Automated method
BS ISO 14168:2003. Metallic powders, excluding hardmetals. Method for testing copper-base infiltrating powders
BS ISO 14168:2011. Metallic powders, excluding hardmetals. Method for testing copper-base infiltrating powders
BS ISO 14180:1998. Solid mineral fuels. Guidance on the sampling of coal seams
BS ISO 14186:2013. Air cargo. Fire containment covers. Design, performance and testing requirements
BS ISO 14188:2012. Metallic and other inorganic coatings. Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings
BS ISO 14200:2012. Space environment (natural and artificial). Guide to process-based implementation of meteoroid and debris environmental models (orbital altitudes below GEO + 2 000 km)
BS ISO 14222:2013. Space environment (natural and artificial). Earth upper atmosphere
BS ISO 14223-1:2011. Radiofrequency identification of animals. Advanced transpondersAir interface
BS ISO 14223-2:2010. Radiofrequency identification of animals. Advanced transpondersCode and command structure
BS ISO 14224:1999. Petroleum and natural gas industries. Collection and exchange of reliability and maintenance data for equipment
BS ISO 14229:2006. Road vehicles. Unified diagnostic services (UDS). Specification and requirements
BS ISO 14229-1:2013. Road vehicles. Unified diagnostic services (UDS)Specification and requirements
BS ISO 14229-2:2013. Road vehicles. Unified diagnostic services (UDS)Session layer services
BS ISO 14229-3:2012. Road vehicles. Unified diagnostic services (UDS)Unified diagnostic services on CAN implementation (UDSonCAN)
BS ISO 14229-4:2012. Road vehicles. Unified diagnostic services (UDS)Unified diagnostic services on FlexRay implementation (UDSonFR)
BS ISO 14229-6:2013. Road vehicles. Unified diagnostic services (UDS)Unified diagnostic services on K-Line implementation (UDSonK-Line)
BS ISO 14230-1:2012. Road vehicles. Diagnostic communication over K-Line (DoK-Line)Physical layer
BS ISO 14230-2:2013. Road vehicles. Diagnostic communication over K-Line (DoK-Line)Data link layer
BS ISO 14237:2000. Surface chemical analysis. Secondary-ion mass spectrometry. Determination of boron atomic concentration in silicon using uniformly doped materials
BS ISO 14237:2010. Surface chemical analysis. Secondary-ion mass spectrometry. Determination of boron atomic concentration in silicon using uniformly doped materials
BS ISO 14242-1:2002. Implants for surgery. Wear of total hip joint prosthesesLoading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
BS ISO 14242-2:2000. Implants for surgery. Wear of total hip joint prosthesesMethods of measurement
BS ISO 14242-3:2009. Implants for surgery. Wear of total hip-joint prosthesesLoading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test
BS ISO 14243-1:2002. Implants for surgery. Wear of total knee joint prosthesesLoading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
BS ISO 14243-1:2009. Implants for surgery. Wear of total knee-joint prosthesesLoading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
BS ISO 14243-2:2000. Implants for surgery. Wear of total knee joint prosthesesMethods of measurement
BS ISO 14243-2:2009. Implants for surgery. Wear of total knee-joint prosthesesMethods of measurement
BS ISO 14243-3:2004. Implants for surgery. Wear of total knee-joint prosthesesLoading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test
BS ISO 14245:2006. Gas cylinders. Specification and testing of LPG cylinder valves. Self-closing
BS ISO 14258:1998. Industrial automation systems. Concepts and rules for enterprise models
BS ISO 14269-1:1997. Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environmentVocabulary
BS ISO 14269-2:1997. Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environmentHeating, ventilating and air-conditioning test method and performance
BS ISO 14269-3:1997. Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environmentDetermination of effect of solar heating
BS ISO 14269-4:1997. Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environmentAir filter element test method
BS ISO 14269-5:1997. Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environmentPressurization system test method
BS ISO 14275:2002. Aerospace. Drives, internal, offset cruciform, ribbed. Metric series
BS ISO 14276:2002. Aerospace. Drives, internal, offset cruciform. Metric series
BS ISO 14277:2002. Aerospace. Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives. Metric series
BS ISO 14278:2002. Aerospace. Gauges, for internal offset cruciform ribbed or unribbed drives. Metric series
BS ISO 14279:2002. Aerospace. Drives, internal, cruciform. Metric series
BS ISO 14280:2002. Aerospace. Drivers, ribbed, for internal cruciform ribbed or unribbed drives. Metric series
BS ISO 14281:2002. Aerospace. Gauges, for internal cruciform ribbed or unribbed drives. Metric series
BS ISO 14287:2012. Plain bearings. Pad materials for tilting pad bearings
BS ISO 14289-1:2012. Document management applications. Electronic document file format enhancement for accessibilityUse of ISO 32000-1 (PDF/UA-1)
BS ISO 14291:2012. Vacuum gauges. Definitions and specifications for quadrupole mass spectrometers
BS ISO 14298:2013. Graphic technology. Management of security printing processes
BS ISO 14300-1:2011. Space systems. Programme managementStructuring of a project
BS ISO 14300-2:2002. Space systems. Programme managementProduct assurance
BS ISO 14300-2:2011. Space systems. Programme managementProduct assurance
BS ISO 14302:2002. Aerospace series. Space systems. Electromagnetic compatibility requirements
BS ISO 14303:2002. Space systems. Launch-vehicle-to-spacecraft interfaces
BS ISO 14309:2011. Rubber, vulcanized or thermoplastic. Determination of volume and/or surface resistivity
BS ISO 1431-1:2004+A1:2009. Rubber, vulcanized or thermoplastic. Resistance to ozone crackingStatic and dynamic strain testing
BS ISO 1431-1:2012. Rubber, vulcanized or thermoplastic. Resistance to ozone crackingStatic and dynamic strain testing
BS ISO 1431-3:2000, BS 903-A45:2000. Rubber, vulcanized or thermoplastic. Resistance to ozone crackingReference and alternative methods for determining the ozone concentration in laboratory test chambers
BS ISO 14315:1997. Specification for industrial wire screens
BS ISO 14317:2006. Sintered metal materials excluding hardmetals. Determination of compressive yield strength
BS ISO 1432:2013. Rubber, vulcanized or thermoplastic. Determination of low-temperature stiffening (Gehman test)
BS ISO 14322:2012. Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
BS ISO 1434:1995. Natural rubber in bales. Amount of bale coating. Determination
BS ISO 14346:2013. Static design procedure for welded hollow-section joints. Recommendations
BS ISO 14347:2008. Fatigue. Design procedure for welded hollow-section joints. Recommendations
BS ISO 1436:2009. Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types for oil-based or water-based fluids. Specification
BS ISO 1436-2:2005. Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types. SpecificationWater-based fluid applications
BS ISO 14368-1:2000. Mineral and sapphire watch-glassesDimensions and tolerances
BS ISO 14368-2:2003. Mineral and sapphire watch-glassesAssembly to the case by adhesive or using a gasket
BS ISO 14368-3:2003. Mineral and sapphire watch-glassesQualitative criteria and test methods
BS ISO 1437:2007. Rubber compounding ingredients. Carbon black. Determination of sieve residue
BS ISO 14377:2002. Canned evaporated milk. Determination of tin content. Method using graphite furnace atomic absorption spectrometry
BS ISO 14378:2000. Milk and dried milk. Determination of iodide content. Method using high performance liquid chromatography
BS ISO 14378:2009. Milk and dried milk. Determination of iodide content. Method using high-performance liquid chromatography
BS ISO 1438:2008. Hydrometry. Open channel flow measurement using thin-plate weirs
BS ISO 14380:2011. Water quality. Determination of the acute toxicity to Thamnocephalus platyurus (Crustacea, Anostraca)
BS ISO 14382:2012. Workplace atmospheres. Determination of toluene diisocyanate vapours using 1-(2-pyridyl) piperazine-coated glass fibre filters and analysis by high performance liquid chromatography with ultraviolet and fluorescence detectors
BS ISO 14396:2002. Reciprocating internal combustion engines. Determination and method for the measurement of engine power. Additional requirements for exhaust emission tests in accordance with ISO 8178
BS ISO 14397-1:2002, BS 6911-15.1:2002. Earth-moving machinery. Loaders and backhoe loadersCalculation of rated operating capacity and test method for verifying calculated tipping load
BS ISO 14397-1:2007. Earth-moving machinery. Loaders and backhoe loadersCalculation of rated operating capacity and test method for verifying calculated tipping load
BS ISO 14397-2:2002, BS 6911-15.2:2002. Earth-moving machinery. Loaders and backhoe loadersTest method for measuring breakout forces and lift capacity to maximum lift height
BS ISO 14397-2:2007. Earth-moving machinery. Loaders and backhoe loadersTest method for measuring breakout forces and lift capacity to maximum lift height
BS ISO 14400:2005. Road vehicles. Wheels and rims. Use, general maintenance and safetyrequi rements and out-of-service conditions
BS ISO 14401-1:2004. Earth-moving machinery. Field of vision of surveillance and rear-view mirrorsTest methods
BS ISO 14401-1:2009. Earth-moving machinery. Field of vision of surveillance and rear-view mirrorsTest methods
BS ISO 14401-2:2004. Earth-moving machinery. Field of vision of surveillance and rear-view mirrorsPerformance criteria
BS ISO 14401-2:2009. Earth-moving machinery. Field of vision of surveillance and rear-view mirrorsPerformance criteria
BS ISO 14404-1:2013. Calculation method of carbon dioxide emission intensity from iron and steel productionSteel plant with blast furnace
BS ISO 14404-2:2013. Calculation method of carbon dioxide emission intensity from iron and steel productionSteel plant with electric arc furnace (EAF)
BS ISO 14408:1998. Tracheal tubes designed for laser surgery. Requirements for marking and accompanying information
BS ISO 14409:2011. Ships and marine technology. Ship launching air bags
BS ISO 14416:2003. Information and documentation. Requirements for binding of books, periodicals, serials and other paper documents for archive and library use. Methods and materials
BS ISO 14420:2005. Carbonaceous products for the production of aluminium. Baked anodes and shaped carbon products. Determination of the coefficient of linear thermal expansion
BS ISO 14427:2004. Carbonaceous materials used in the production of aluminium. Cold and tepid ramming pastes. Preparation of unbaked test specimens and determination of apparent density after compaction
BS ISO 14428:2004. Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Expansion/shrinkage during baking
BS ISO 14435:2005. Carbonaceous materials for the production of aluminium. Petroleum coke. Determination of trace metals by inductively coupled plasma atomic emission spectrometry
BS ISO 14436:2010. Pulps. Standard tap water for drainability measurements. Conductivity 40 mS/m to 150 mS/m
BS ISO 14452:2012. Network services billing. Requirements
BS ISO 1446:2001+A1:2011. Green coffee. Determination of water content. Basic reference method
BS ISO 14461-1:2005. Milk and milk products. Quality control in microbiological laboratoriesAnalyst performance assessment for colony counts
BS ISO 14461-2:2005. Milk and milk products. Quality control in microbiological laboratoriesDetermination of the reliability of colony counts of parallel plates and subsequent dilution steps
BS ISO 14469-3:2006. Road vehicles. Compressed natural gas (CNG) refuelling connector25 MPa (250 bar) connector
BS ISO 14470:2011. Food irradiation. Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food
BS ISO 14486:2012. Laminate floor coverings. Specification
BS ISO 14487:1997. Pulps. Standard water for physical testing
BS ISO 14488:2007. Particulate materials. Sampling and sample splitting for the determination of particulate properties
BS ISO 14490-1:2005. Optics and optical instruments. Test methods for telescopic systemsTest methods for basic characteristics
BS ISO 14490-2:2005. Optics and optical instruments. Test methods for telescopic systemsTest methods for binocular systems
BS ISO 14490-3:2004. Optics and optical instruments. Test methods for telescopic systemsTest methods for telescopic sights
BS ISO 14490-4:2005. Optics and optical instruments. Test methods for telescopic systemsTest methods for astronomical telescopes
BS ISO 14490-5:2005. Optics and optical instruments. Test methods for telescopic systemsTest methods for transmittance
BS ISO 14490-6:2005. Optics and optical instruments. Test methods for telescopic systemsTest methods for veiling glare index
BS ISO 14490-7:2005. Optics and optical instruments. Test methods for telescopic systemsTest methods for limit of resolution
BS ISO 14490-8:2011. Optics and optical instruments. Test methods for telescopic systemsTest methods for night-vision devices
BS ISO 14500:2003. Textile machinery and accessories. Harnesses for Jacquard weaving machines. Vocabulary
BS ISO 14502-1:2005. Determination of substances characteristic of green and black teaContent of total polyphenols in tea. Colorimetric method using Folin-Ciocalteu reagent
BS ISO 14502-2:2005. Determination of substances characteristic of green and black teaContent of catechins in green tea. Method using high-performance liquid chromatography
BS ISO 14507:2003. Soil quality. Pretreatment of samples for determination of organic contaminants
BS ISO 14508:1997. Road vehicles. Spark plugs. Terminals
BS ISO 14508:2006. Road vehicles. Spark plugs. Terminals
BS ISO 14511:2001. Measurement of fluid flow in closed conduits. Thermal mass flowmeters
BS ISO 14512:1999. Passenger cars. Straight-ahead braking on surfaces with split coefficient of friction. Open-loop test method
BS ISO 14513:2006. Road vehicles. Pedestrian protection. Head impact test method
BS ISO 14520-1:2000. Gaseous fire-extinguishing systems. Physical properties and system designGeneral requirements
BS ISO 14520-1:2006. Gaseous fire-extinguishing systems. Physical properties and system designGeneral requirements
BS ISO 14520-10:2000. Gaseous fire-extinguishing systems. Physical properties and system designHFC 23 extinguishant
BS ISO 14520-10:2005. Gaseous fire-extinguishing systems. Physical properties and system designHFC 23 extinguishant
BS ISO 14520-11:2000. Gaseous fire-extinguishing systems. Physical properties and system designHFC 236fa extinguishant
BS ISO 14520-11:2005. Gaseous fire-extinguishing systems. Physical properties and system designHFC 236fa extinguishant
BS ISO 14520-12:2000. Gaseous fire-extinguishing systems. Physical properties and system designIG-01 extinguishant
BS ISO 14520-12:2005. Gaseous fire-extinguishing systems. Physical properties and system designIG-01 extinguishant
BS ISO 14520-13:2000. Gaseous fire-extinguishing systems. Physical properties and system designIG-100 extinguishant
BS ISO 14520-13:2005. Gaseous fire-extinguishing systems. Physical properties and system designIG-100 extinguishant
BS ISO 14520-14:2000. Gaseous fire-extinguishing systems. Physical properties and system designIG-55 extinguishant
BS ISO 14520-14:2005. Gaseous fire-extinguishing systems. Physical properties and system designIG-55 extinguishant
BS ISO 14520-15:2000. Gaseous fire-extinguishing systems. Physical properties and system designIG-541 extinguishant
BS ISO 14520-15:2005. Gaseous fire-extinguishing systems. Physical properties and system designIG-541 extinguishant
BS ISO 14520-2:2000. Gaseous fire-extinguishing systems. Physical properties and system designCFDOWN3I extinguishant
BS ISO 14520-3:2000. Gaseous fire-extinguishing systems. Physical properties and system designFC-2-1-8 extinguishant
BS ISO 14520-4:2000. Gaseous fire-extinguishing systems. Physical properties and system designFC-3-1-10 extinguishant
BS ISO 14520-5:2006. Gaseous fire-extinguishing systems. Physical properties and system designFK-5-1-12 extinguishant
BS ISO 14520-6:2000. Gaseous fire-extinguishing systems. Physical properties and system designHCFC Blend A extinguishant
BS ISO 14520-6:2006. Gaseous fire-extinguishing systems. Physical properties and system designHCFC blend A extinguishant
BS ISO 14520-7:2000. Gaseous fire-extinguishing systems. Physical properties and system designHCFC Blend 124 extinguishant
BS ISO 14520-8:2000. Gaseous fire-extinguishing systems. Physical properties and system designHCFC 125 extinguishant
BS ISO 14520-8:2006. Gaseous fire-extinguishing systems. Physical properties and system designHFC 125 extinguishant
BS ISO 14520-9:2000. Gaseous fire-extinguishing systems. Physical properties and system designHFC 227ea extinguishant
BS ISO 14520-9:2006. Gaseous fire-extinguishing systems. Physical properties and system designHFC 227ea extinguishant
BS ISO 14524:1999. Photography. Electronic still-picture cameras. Methods for measuring opto-electronic conversion functions (OECFs)
BS ISO 14524:2009. Photography. Electronic still-picture Cameras. Methods for measuring optoelectronic conversion functions (OECFs)
BS ISO 14531-1:2002. Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. SpecificationsPipes
BS ISO 14531-2:2004. Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. SpecificationsFittings for heat-fusion jointing
BS ISO 14531-3:2006. Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. SpecificationsFittings for mechanical jointing (including PE-X/metal transitions)
BS ISO 14531-3:2010. Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. SpecificationsFittings for mechanical jointing (including PE-X/metal transitions)
BS ISO 14531-4:2006. Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. SpecificationsSystem design and installation guidelines
BS ISO 14535:2001. Photography. Room-light loading packages for electronic scanners and image-setting film and paper rolls. Dimensions and related requirements
BS ISO 14540:2013. Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar)
BS ISO 14541:2013. Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for general purpose
BS ISO 14544:2013. Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature. Determination of compression properties
BS ISO 14546:2000. Photography. Aerial films and spools. Dimensions
BS ISO 14558:2000. Rubber. Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy
BS ISO 1456:2003. Metallic coatings. Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium
BS ISO 14560:2004. Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million
BS ISO 14572:2006. Road vehicles. Round, screened and unscreened, 60 V and 600 V multi-core sheathed cables. Test methods and requirements for basic and high-performance cables
BS ISO 14572:2011. Road vehicles. Round, sheathed, 60 V and 600 V screened and unscreened single- or multi-core cables. Test methods and requirements for basic- and high-performance cables
BS ISO 14574:2013. Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature. Determination of tensile properties
BS ISO 1458:2002. Metallic coatings. Electrodeposited coatings of nickel
BS ISO 14592-1:2002, BS 6068-5.30:2002. Water quality. Evaluation of the aerobic biodegradability of organic compounds at low concentrationsShake-flask batch test with surface water or surface water/sediment suspensions
BS ISO 14592-2:2002, BS 6068-5.31:2002. Water quality. Evaluation of the aerobic biodegradability of organic compounds at low concentrationsContinuous flow river model with attached biomass
BS ISO 14594:2003. Microbeam analysis. Electron probe microanalysis. Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
BS ISO 14595:2003. Microbeam analysis. Electron probe microanalysis. Guidelines for the specification of certified reference materials (CRMs)
BS ISO 14603:2012. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for open-hole tension of continuous fibre-reinforced ceramic matrix composites at room temperature
BS ISO 14604:2012. Fine ceramics (advanced ceramics, advanced technical ceramics). Methods of test for ceramic coatings. Determination of fracture strain
BS ISO 14605:2013. Fine ceramics (advanced ceramics, advanced technical ceramics). Light source for testing semiconducting photocatalytic materials used under indoor lighting environment
BS ISO 14606:2000. Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials
BS ISO 14610:2012. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of porous ceramics at room temperature
BS ISO 14612:2004. Ships and marine technology. Ship's bridge layout and associated equipment. Requirements and guidelines for centralized and intergrated bridge functions.
BS ISO 14615:1997. Adhesives. Durability of structural adhesive joints. Exposure to humidity and temperature under load
BS ISO 14617-1:2002. Graphical symbols for diagramsGeneral information and indexes
BS ISO 14617-10:2002. Graphical symbols for diagramsFluid power converters
BS ISO 14617-11:2002. Graphical symbols for diagramsDevices for heat transfer and heat engines
BS ISO 14617-12:2002. Graphical symbols for diagramsDevices for separating, purification and mixing
BS ISO 14617-2:2002. Graphical symbols for diagramsSymbols having general application
BS ISO 14617-3:2002. Graphical symbols for diagramsConnections and related devices
BS ISO 14617-4:2002. Graphical symbols for diagramsActuators and related devices
BS ISO 14617-5:2002. Graphical symbols for diagramsMeasurement and control devices
BS ISO 14617-6:2002. Graphical symbols for diagramsMeasurement and control functions
BS ISO 14617-7:2002. Graphical symbols for diagramsBasic mechanical components
BS ISO 14617-8:2002. Graphical symbols for diagramsValves and dampers
BS ISO 14617-9:2002. Graphical symbols for diagramsPumps, compressors and fans
BS ISO 14619:2003. Space systems. Space experiments. General requirements
BS ISO 14620-2:2011. Space systems. Safety requirementsLaunch site operations
BS ISO 14621-2:2003. Space systems. Electrical, electronic and electromechanical (EEE) partsControl programme requirements
BS ISO 14623:2003. Space systems. Pressure vessels and pressurized structures. Design and operation
BS ISO 14624-2:2003. Space systems. Safety and compatibility of materialsDetermination of flammability of electrical-wire insulation and accessory materials
BS ISO 14624-3:2005. Space systems. Safety and compatibility of materialsDetermination of offgassed products from materials and assembled articles
BS ISO 14624-4:2003. Space systems. Safety and compatibility of materialsDetermination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environments
BS ISO 14624-5:2006. Space systems. Safety and compatibility of materialsDetermination of reactivity of system/component materials with aerospace propellants
BS ISO 14624-6:2006. Space systems. Safety and compatibility of materialsDetermination of reactivity of processing materials with aerospace fluids
BS ISO 14624-7:2006. Space systems. Safety and compatibility of materialsDetermination of permeability and penetration of materials to aerospace fluids
BS ISO 14625:2007. Space systems. Ground support equipment for use at launch, landing or retrieval sites. General requirements
BS ISO 14627:2012. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture resistance of silicon nitride materials for rolling bearing balls at room temperature by indentation fracture (IF) method
BS ISO 14628:2012. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for rolling contact fatigue of silicon nitride ceramics at room temperature by balls-on-flat method
BS ISO 14629:2012. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of flowability of ceramic powders
BS ISO 14635-1:2000. Gears. FZG test proceduresFZG test method A/8, 3/90 for relative scruffing load-carrying capacity of oils
BS ISO 14635-3:2005. Gears. FZG test proceduresFZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
BS ISO 14641-1:2012. Electronic archiving Specifications concerning the design and the operation of an information system for electronic information preservation
BS ISO 14647:2000. Metallic coatings. Determination of porosity on gold coatings on metallic substrates. Nitric acid vapour test
BS ISO 14648-1:2001. Micrographics. Quality control of COM recorders that generate images using a single internal display systemCharacteristics of the software test target
BS ISO 14648-2:2001. Micrographics. Quality control of COM recorders that generate images using a single internal display systemMethod of use
BS ISO 14654:1999. Epoxy-coated steel for the reinforcement of concrete
BS ISO 14656:1999. Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete
BS ISO 14661:2000. Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements
BS ISO 14681:1998
BS ISO 14681:1998. Diesel engines. Fuel injection pump testing. Calibrating fuel injectors
BS ISO 14686:2003
BS ISO 14686:2003. Hydrometric determinations. Pumping tests for water wells. Considerations and guidelines for design, performance and use
BS ISO 14687-2:2012. Hydrogen fuel. Product specificationProton exchange membrane (PEM) fuel cell applications for road vehicles
BS ISO 14691:1999
BS ISO 14691:1999. Petroleum and natural gas industries. Flexible couplings for mechanical power transmission. General purpose applications
BS ISO 14694:2003+A1:2011
BS ISO 14694:2003+A1:2011. Industrial fans. Specifications for balance quality and vibration levels
BS ISO 14695:2003, BS 848-6:2003
BS ISO 14695:2003, BS 848-6:2003. Industrial fans. Method of measurement of fan vibration
BS ISO 14697:2007
BS ISO 14697:2007. Reaction-to-fire tests. Guidance on the choice of substrates for building and transport products
BS ISO 14701:2011. Surface chemical analysis. X-ray photoelectron spectroscopy. Measurement of silicon oxide thickness
BS ISO 14703:2008
BS ISO 14703:2008. Fine ceramics (advanced ceramics, advanced technical ceramics). Sample preparation for the determination of particle size distribution of ceramic powders
BS ISO 14706:2000
BS ISO 14706:2000. Surface chemical analysis. Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy
BS ISO 14707:2000
BS ISO 14707:2000. Surface chemical analysis. Glow discharge optical emission spectrometry (GD-OES). Introduction to use
BS ISO 14711:2003
BS ISO 14711:2003. Space systems. Unmanned mission operations concepts. Guidelines for defining and assessing concept products
BS ISO 14714:1998
BS ISO 14714:1998. Essential oils and aromatic extracts. Determination of residual benzene content
BS ISO 14715:2010. Oil of thyme containing thymol, Spanish type [Thymus zygis (Loefl.) L.]
BS ISO 14717:2008
BS ISO 14717:2008. Oil of origanum, Spanish type [Coridothymus capitatus (L.) Rchb.f.]
BS ISO 14721:2003
BS ISO 14721:2003. Space data and information transfer systems. Open archival information systems. Reference model
BS ISO 14721:2012. Space data and information transfer systems. Open archival information system (OAIS). Reference model
BS ISO 14726:2008
BS ISO 14726:2008. Ships and marine technology. Identification colours for the content of piping systems
BS ISO 14728-1:2004
BS ISO 14728-1:2004. Rolling bearings. Linear motion rolling bearingsDynamic load ratings and rating life
BS ISO 14728-2:2004
BS ISO 14728-2:2004. Rolling bearings. Linear motion rolling bearingsStatic load ratings
BS ISO 14740:1998
BS ISO 14740:1998. Forestry machinery. Backpack power units for brush cutters, grass trimmers, pole cutters and similar appliances. Safety requirements and testing
BS ISO 14743:2004
BS ISO 14743:2004. Pneumatic fluid power. Push-in connectors for thermoplastic tubes
BS ISO 14788:2005
BS ISO 14788:2005. Continuous hot-dip zinc-5% aluminium alloy coated steel sheet
BS ISO 14788:2011. Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet
BS ISO 14792:2003
BS ISO 14792:2003. Road vehicles. Heavy commercial vehicles and buses. Steady-state circular tests
BS ISO 14792:2011. Road vehicles. Heavy commercial vehicles and buses. Steady-state circular tests
BS ISO 14793:2003
BS ISO 14793:2003. Road vehicles. Heavy commercial vehicles and buses. Lateral transient response test methods
BS ISO 14793:2011. Road vehicles. Heavy commercial vehicles and buses. Lateral transient response test methods
BS ISO 14794:2003
BS ISO 14794:2003. Heavy commercial vehicles and buses. Braking in a turn. Open-loop test methods
BS ISO 14794:2011. Heavy commercial vehicles and buses. Braking in a turn. Open-loop test methods
BS ISO 14802:2012. Corrosion of metals and alloys. Guidelines for applying statistics to analysis of corrosion data
BS ISO 14807:2001
BS ISO 14807:2001. Photography. Transmission and reflection densitometers. Method for determining performance
BS ISO 14808:1997
BS ISO 14808:1997. Photography. Composition of 135-film canisters
BS ISO 14813-1:2007
BS ISO 14813-1:2007. Intelligent transport systems. Reference model architecture(s) for the ITS sectorITS service domains, service groups and services
BS ISO 14813-5:2010. Intelligent transport systems. Reference model architecture(s) for the ITS sectorRequirements for architecture description in ITS standards
BS ISO 14813-6:2009. Intelligent transport systems. Reference model architecture(s) for the ITS sectorData presentation in ASN.1
BS ISO 14824-1:2012. Grout for prestressing tendonsBasic requirements
BS ISO 14824-2:2012. Grout for prestressing tendonsGrouting procedures
BS ISO 14824-3:2012. Grout for prestressing tendonsTest methods
BS ISO 14827-1:2005
BS ISO 14827-1:2005. Transport information and control systems. Data interfaces between centres for transport information and control systemsMessage definition requirements
BS ISO 14827-2:2005
BS ISO 14827-2:2005. Transport information and control systems. Data interfaces between centres for transport information and control systemsDATEX-ASN
BS ISO 14835-1:2005
BS ISO 14835-1:2005. Mechanical vibration and shock. Cold provocation tests for the assessment of peripheral vascular functionMeasurement and evaluation of finger skin temperature
BS ISO 14835-2:2005
BS ISO 14835-2:2005. Mechanical vibration and shock. Cold provocation tests for the assessment of peripheral vascular functionMeasurement and evaluation of finger systolic blood pressure
BS ISO 14837-1:2005
BS ISO 14837-1:2005. Mechanical vibration. Ground-borne noise and vibration arising from rail systemsGeneral guidance
BS ISO 14839-1:2002+A1:2010
BS ISO 14839-1:2002+A1:2010. Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearingsVocabulary
BS ISO 14839-2:2004
BS ISO 14839-2:2004. Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearingsEvaluation of vibration
BS ISO 14839-3:2006
BS ISO 14839-3:2006. Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearingsEvaluation of stability margin
BS ISO 14839-4:2012. Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearingsTechnical guidelines
BS ISO 14848:1998
BS ISO 14848:1998. Plastics. Unsaturated-polyester resins. Determination of reactivity at 130°C
BS ISO 14849:1999
BS ISO 14849:1999. Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Indophenol method
BS ISO 14850-1:2004
BS ISO 14850-1:2004. Nuclear energy. Waste-packages activity measurementHigh-resolution gamma spectrometry in integral mode with open geometry
BS ISO 14853:2005
BS ISO 14853:2005. Plastics. Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system. Method by measurement of biogas production
BS ISO 14856:2001
BS ISO 14856:2001. Timekeeping instruments. Wristwatch cases. Fixing dimensions of non-spring-bar types
BS ISO 14859:2012. Ships and marine technology. Sound reception systems
BS ISO 14865:1998
BS ISO 14865:1998. Machinery for forestry. Portable hand-held brush cutters and grass trimmers with backpack mounted combustion engine power source. Safety requirements and testing
BS ISO 14869-2:2002
BS ISO 14869-2:2002. Soil quality. Dissolution for the determination of total element contentDissolution by alkaline fusion
BS ISO 14879-1:2000
BS ISO 14879-1:2000. Implants for surgery. Total knee-joint prosthesesDetermination of endurance properties of knee tibial trays
BS ISO 14880-1:2001
BS ISO 14880-1:2001. Microlens arrayVocabulary
BS ISO 14881:2001
BS ISO 14881:2001. Integrated optics. Interfaces. Parameters relevant to coupling properties
BS ISO 14887:2000
BS ISO 14887:2000. Sample preparation. Dispersing procedures for powders in liquids
BS ISO 14892:2002
BS ISO 14892:2002. Dried skimmed milk. Determination of vitamin D content using high-performance liquid chromatography
BS ISO 14897:2000
BS ISO 14897:2000. Plastics. Polyols for use in the production of polyurethane. Determination of water content
BS ISO 14897:2002
BS ISO 14897:2002. Plastics. Polyols for use in the production of polyurethane. Determination of water content
BS ISO 14898:1999+A1:2011
BS ISO 14898:1999+A1:2011. Plastics. Aromatic isocyanates for use in the production of polyurethane. Determination of acidity
BS ISO 14899:2001
BS ISO 14899:2001. Plastics. Polyols for use in the production of polyurethane. Determination of basicity
BS ISO 14900:2001
BS ISO 14900:2001. Plastics. Polyols for use in the production of polyurethane. Determination of hydroxyl number
BS ISO 14903:2012. Refrigerating systems and heat pumps. Qualification of tightness of components and joints
BS ISO 14932:2012. Rubber compounding ingredients. Organic vulcanizing agents. Determination of organic peroxide content
BS ISO 14934-2:2013. Fire tests. Calibration and use of heat flux metersPrimary calibration methods
BS ISO 14943:2004
BS ISO 14943:2004. Nuclear energy. Nuclear fuel technology. Administrative criteria related to criticality safety
BS ISO 14949:2001
BS ISO 14949:2001. Implants for surgery. Two-part addition-cure silicone elastomers
BS ISO 14950:2004
BS ISO 14950:2004. Space systems. Unmanned spacecraft operability
BS ISO 14951-1:1999
BS ISO 14951-1:1999. Space systems. Fluid characteristicsOxygen
BS ISO 14951-10:1999
BS ISO 14951-10:1999. Space systems. Fluid characteristicsWater
BS ISO 14951-11:1999
BS ISO 14951-11:1999. Space systems. Fluid characteristicsAmmonia
BS ISO 14951-12:1999
BS ISO 14951-12:1999. Space systems. Fluid characteristicsCarbon dioxide
BS ISO 14951-13:1999
BS ISO 14951-13:1999. Space systems. Fluid characteristicsBreathing air
BS ISO 14951-2:1999
BS ISO 14951-2:1999. Space systems. Fluid characteristicsHydrogen propellant
BS ISO 14951-3:1999
BS ISO 14951-3:1999. Space systems. Fluid characteristicsNitrogen
BS ISO 14951-4:1999
BS ISO 14951-4:1999. Space systems. Fluid characteristicsHelium
BS ISO 14951-5:1999
BS ISO 14951-5:1999. Space systems. Fluid characteristicsNitrogen tetroxide propellant
BS ISO 14951-6:1999
BS ISO 14951-6:1999. Space systems. Fluid characteristicsMonomethylhydrazine propellant
BS ISO 14951-7:1999
BS ISO 14951-7:1999. Space systems. Fluid characteristicsHydrazine propellant
BS ISO 14951-8:1999
BS ISO 14951-8:1999. Space systems. Fluid characteristicsKerosene propellant
BS ISO 14951-9:1999
BS ISO 14951-9:1999. Space systems. Fluid characteristicsArgon
BS ISO 14952-1:2003
BS ISO 14952-1:2003. Space systems. Surface cleanliness of fluid systemsVocabulary
BS ISO 14952-2:2003
BS ISO 14952-2:2003. Space systems. Surface cleanliness of fluid systemsCleanliness levels
BS ISO 14952-3:2003
BS ISO 14952-3:2003. Space systems. Surface cleanliness of fluid systemsAnalytical procedures for the determination of nonvolatile residues and particulate contamination
BS ISO 14952-4:2003
BS ISO 14952-4:2003. Space systems. Surface cleanliness of fluid systemsRough-cleaning processes
BS ISO 14952-5:2003
BS ISO 14952-5:2003. Space systems. Surface cleanliness of fluid systemsDrying processes
BS ISO 14952-6:2003
BS ISO 14952-6:2003. Space systems. Surface cleanliness of fluid systemsPrecision-cleaning processes
BS ISO 14953:2000
BS ISO 14953:2000. Space systems. Structural design. Determination of loading levels for static qualification testing of launch vehicles
BS ISO 14954:2005
BS ISO 14954:2005. Space systems. Dynamic and static analysis. Exchange of mathematical models
BS ISO 14961:2002
BS ISO 14961:2002. Space data and information transfer systems. Parameter value language specification
BS ISO 1496-1:2013. Series 1 freight containers. Specification and testingGeneral cargo containers for general purposes
BS ISO 1496-2:1996
BS ISO 1496-2:1996. Series 1 freight containers. Specification and testingThermal containers
BS ISO 1496-2:2008
BS ISO 1496-2:2008. Series 1 freight containers. Specification and testingThermal containers
BS ISO 1496-3:1995
BS ISO 1496-3:1995. Series 1 Freight containers. Specification and testingTank containers for liquids, gases and pressurized dry bulk
BS ISO 14963:2003
BS ISO 14963:2003. Mechanical vibration and shock. Guidelines for dynamic tests and investigations on bridges and viaducts
BS ISO 1496-4:1991
BS ISO 1496-4:1991. Series 1 freight containers. Specification and testingNon-pressurized containers for dry bulk
BS ISO 14964:2000
BS ISO 14964:2000. Mechanical vibration and shock. Vibration of stationary structures. Specific requirements for quality management in measurement and evaluation of vibration
BS ISO 14965:2000
BS ISO 14965:2000. Ambient air. Determination of total non-methane organic compounds. Cryogenic preconcentration and direct flame ionization detection method
BS ISO 14966:2002
BS ISO 14966:2002. Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method
BS ISO 14968:1999
BS ISO 14968:1999. Paper and board. Cut-size office paper. Measurement of curl in a pack of sheets
BS ISO 14972:1998
BS ISO 14972:1998. Sterile obturators for single use with over-needle peripheral intravascular catheters
BS ISO 14975:2000
BS ISO 14975:2000. Surface chemical analysis. Information formats
BS ISO 14985:1999
BS ISO 14985:1999. Hard-copy output of engineering drawings. Specification for the structure of control files
BS ISO 14997:2003
BS ISO 14997:2003. Optics and optical instruments. Test methods for surface imperfections of optical elements
BS ISO 14997:2011. Optics and photonics. Test methods for surface imperfections of optical elements
BS ISO 14999-4:2007
BS ISO 14999-4:2007. Optics and photonics. Interferometric measurement of optical elements and optical systemsInterpretation and evaluation of tolerances specified in ISO 10110
BS ISO 15:1998
BS ISO 15:1998. Rolling bearings. Radial bearings. Boundary dimensions, general plan
BS ISO 15:2011. Rolling bearings. Radial bearings. Boundary dimensions, general plan
BS ISO 15003:2006
BS ISO 15003:2006. Agricultural engineering. Electrical and electronic equipment. Testing resistance to environmental conditions
BS ISO 15009:2002
BS ISO 15009:2002. Soil quality. Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons. Purge-and-trap method with thermal desorption
BS ISO 15009:2012. Soil quality. Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons. Purge-and-trap method with thermal desorption
BS ISO 1501:2009
BS ISO 1501:2009. ISO miniature screw threads
BS ISO 15010:1998
BS ISO 15010:1998. Disposable hanging devices for transfusion and infusion bottles. Requirements and test methods
BS ISO 15014:2007
BS ISO 15014:2007. Plastics. Extruded sheets of poly(vinylidene fluoride) (PVDF). Requirements and test methods
BS ISO 15016:2002
BS ISO 15016:2002. Ships and marine technology. Guidelines for the assessment of speed and power performance by analysis of speed trial data
BS ISO 15022-1:1999
BS ISO 15022-1:1999. Securities. Scheme for messages (data field dictionary)Data field and message design rules and guidelines
BS ISO 15022-2:1999
BS ISO 15022-2:1999. Securities. Scheme for messages (data field dictionary)Maintenance of the data field dictionary and catalogue of messages
BS ISO 15024:2001
BS ISO 15025:2000. Protective clothing. Protection against heat and flame. Method of test for limited flame spread
BS ISO 15028:2004. Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of hydrolysable chlorine
BS ISO 1503:2008. Spatial orientation and direction of movement. Ergonomic requirements
BS ISO 15031-1:2010. Road vehicles. Communication between vehicle and external equipment for emissions-related diagnosticsGeneral information and use case definition
BS ISO 15031-2:2010. Road vehicles. Communication between vehicle and external equipment for emissions-related diagnosticsGuidance on terms, definitions, abbreviations and acronyms
BS ISO 15031-4:2005. Road vehicles. Communication between vehicle and external equipment for emissions-related diagnosticsExternal test equipment
BS ISO 15031-5:2006. Road vehicles. Communication between vehicle and external equipment for emissions-related diagnosticsEmissions-related diagnostic services
BS ISO 15031-5:2011. Road vehicles. Communication between vehicle and external equipment for emissions-related diagnosticsEmissions-related diagnostic services
BS ISO 15031-6:2005. Road vehicles. Communication between vehicle and external equipment for emissions-related diagnosticsDiagnostic trouble code definitions
BS ISO 15031-6:2010. Road vehicles. Communication between vehicle and external equipment for emissions-related diagnosticsDiagnostic trouble code definitions
BS ISO 15031-7:2013. Road vehicles. Communication between vehicle and external equipment for emissions-related diagnosticsData link security
BS ISO 15032:2000. Prostheses. Structural testing of hip joints
BS ISO 15033:2000. Plastics. Determination of caprolactam and its cyclic and linear oligomers by HPLC
BS ISO 15033:2007. Plastics. Determination of caprolactam and its cyclic and linear oligomers by HPLC
BS ISO 15034:2000. Composites. Prepregs. Determination of resin flow
BS ISO 15037-1:1998. Road vehicles. Vehicle dynamics test methodsGeneral conditions for passenger cars
BS ISO 15037-1:2006. Road vehicles. Vehicle dynamics test methodsGeneral conditions for passenger cars
BS ISO 15037-2:2002. Road vehicles. Vehicle dynamics test methodsGeneral conditions for heavy vehicles and buses
BS ISO 15038:1999. Plastics. Organic-perester crosslinking agents for unsaturated-polyester thermosetting materials. Determination of active-oxygen content
BS ISO 15039:2003. Textile-glass rovings. Determination of solubility of size
BS ISO 15040:1999. Composites. Prepregs. Determination of gel time
BS ISO 15042:2011. Multiple split-system air-conditioners and air-to-air heat pumps. Testing and rating for performance
BS ISO 1505:1993. Textile machinery. Widths relating to dyeing and finishing machines. Definitions and range of nominal widths
BS ISO 15063:2011. Plastics. Polyols for use in the production of polyurethanes. Determination of hydroxyl number by NIR spectroscopy
BS ISO 15064:2004. Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of the isomer ratio in tuluenediisocyanate
BS ISO 15064:2010. Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of the isomer ratio in toluenediisocyanate
BS ISO 15072:1999. Hexagon bolts with flange with metric fine pitch thread. Small series. Product grade A
BS ISO 15072:2012. Hexagon bolts with flange with metric fine pitch thread. Small series. Product grade A
BS ISO 15076-1:2005. Image technology colour management. Architecture, profile format and data structureBased on ICC.1:2004-10
BS ISO 15076-1:2010. Image technology colour management. Architecture, profile format and data structureBased on ICC.1:2010
BS ISO 15077:2008. Tractors and self-propelled machinery for agriculture. Operator controls. Actuating forces, displacement, location and method of operation
BS ISO 15078:1998. Machinery for forestry. Log loaders. Location and method of operation of two-lever operator controls
BS ISO 15081:2005. Agricultural irrigation equipment. Graphical symbols for pressurized irrigation systems
BS ISO 15081:2011. Agricultural equipment. Graphical symbols for pressurized irrigation systems
BS ISO 15086-1:2001. Hydraulic fluid power. Determination of fluid-borne noise characteristics of components and systemsHydraulic fluid power. Determination of the fluid borne noise characteristics of components and systems. Introduction
BS ISO 15086-2:2000. Hydraulic fluid power. Determination of fluid-borne noise characteristics of components and systemsMeasurement of speed of sound in a fluid in a pipe
BS ISO 15093:2008. Jewellery. Determination of precious metals in 999 0/00 gold, platinum and palladium jewellery alloys. Difference method using inductively coupled plasma optical emission spectroscopy (ICP-OES)
BS ISO 15096:2008. Jewellery. Determination of silver in 999 0/00 silver jewellery alloys. Difference method using inductively coupled plasma optical emission spectroscopy (ICP-OES)
BS ISO 15100:2000. Plastics. Reinforcement fibres. Chopped strands. Determination of bulk density
BS ISO 15105-1:2002. Plastics. Film and sheeting. Determination of gas-transmission rateDifferential-pressure method
BS ISO 15105-1:2007. Plastics. Film and sheeting. Determination of gas-transmission rateDifferential-pressure methods
BS ISO 15105-2:2003. Plastics. Film and sheeting. Determination of gas-transmission rateEqual-pressure method
BS ISO 15106-4:2008. Plastics. Film and sheeting. Determination of water vapour transmission rateGas-chromatographic detection sensor method
BS ISO 15112:2007. Natural gas. Energy determination
BS ISO 15112:2011. Natural gas. Energy determination
BS ISO 15113:1999, BS 903-A61:2000. Rubber. Determination of frictional properties
BS ISO 15113:2005. Rubber. Determination of frictional properties
BS ISO 15118-1:2013. Road vehicles. Vehicle to grid communication interfaceGeneral information and use-case definition
BS ISO 15142-1:2003. Implants for surgery. Metal intramedullary nailing systemsIntramedullary nails
BS ISO 15142-2:2003. Implants for surgery. Metal intramedullary nailing systemsLocking components
BS ISO 15142-3:2003. Implants for surgery. Metal intramedullary nailing systemsConnection devices and reamer diameter measurements
BS ISO 15143-1:2010. Earth-moving machinery and mobile road construction machinery. Worksite data exchangeSystem architecture
BS ISO 15143-2:2010. Earth-moving machinery and mobile road construction machinery. Worksite data exchangeData dictionary
BS ISO 15152:2003+A1:2012. Tobacco. Determination of the content of total alkaloids as nicotine. Continuous-flow analysis method
BS ISO 15153:2003+A1:2012. Tobacco. Determination of the content of reducing substances. Continuous-flow analysis method
BS ISO 15154:2003+A1:2012. Tobacco. Determination of the content of reducing carbohydrates. Continuous-flow analysis method
BS ISO 15161:2001. Guidelines on the application of ISO 9001:2000 for the food and drink industry
BS ISO 15163:2012. Milk and milk products. Calf rennet and adult bovine rennet. Determination by chromatography of chymosin and bovine pepsin contents
BS ISO 15166-1:1998. Adhesives. Methods of preparing bulk specimens.Two-part systems
BS ISO 15166-2:2000. Adhesives. Methods of preparing bulk specimens.Elevated-temperature-curing one-part systems
BS ISO 15169:2003. Petroleum and liquid petroleum products. Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
BS ISO 15171-1:1999. Connections for fluid power and general use. Hydraulic couplings for diagnostic purposesCoupling not for connection under pressure
BS ISO 15171-2:2000. Connections for fluid power and general use. Hydraulic couplings for diagnostic purposesCoupling with M16 x 2 end for connection under pressure
BS ISO 15174:2012. Milk and milk products. Microbial coagulants. Determination of total milk-clotting activity
BS ISO 15176:2002. Soil quality. Characterization of excavated soil and other soil materials intended for re-use
BS ISO 15177:2012. Hot-rolled twin-roll cast carbon steel sheet of commercial quality
BS ISO 15179:2012. Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel
BS ISO 15181-6:2012. Paints and varnishes. Determination of release rate of biocides from antifouling paintsDetermination of tralopyril release rate by quantitation of its degradation product in the extract
BS ISO 15188:2001. Project management guidelines for terminology standardization
BS ISO 15190:2003. Medical laboratories. Requirements for safety
BS ISO 15198:2004. Clinical laboratory medicine. In vitro diagnostic medical devices. Validation of user quality control procedures by the manufacturer
BS ISO 15202-1:2000. Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometrySampling
BS ISO 15202-1:2012. Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometrySampling
BS ISO 15202-2:2001. Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometrySample preparation
BS ISO 15202-2:2012. Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometrySample preparation
BS ISO 15202-3:2004. Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometryAnalysis
BS ISO 15208:2012. Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality
BS ISO 15211:2012. Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel
BS ISO 15213:2003. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions
BS ISO 15214:1998. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of mesophilic lactic acid bacteria. Colony-count technique at 30°C
BS ISO 15217:2000. Fluid power systems and components. 16mm square electrical connector with earth contact. Characteristics and requirements
BS ISO 15218:2003. Pneumatic fluid power. 3/2 solenoid valves. Mounting interface surfaces
BS ISO 15222:2011. Truck and bus tyres. Method for measuring relative wet grip performance. Loaded new tyres
BS ISO 15223-2:2010. Medical devices. Symbols to be used with medical device labels, labelling, and information to be suppliedSymbol development, selection and validation
BS ISO 15227:2000. Optics and optical instruments. Microscopes. Testing of stereomicroscopes
BS ISO 15230:2007. Mechanical vibration and shock. Coupling forces at the man-machine interface for hand-transmitted vibration
BS ISO 15237:2003. Solid mineral fuels. Determination of total mercury content of coal
BS ISO 15238:2003. Solid mineral fuels. Determination of total cadmium content of coal
BS ISO 15239:2005. Solid mineral fuels. Evaluation of the measurement performance of on-line analysers
BS ISO 15241:2001. Rolling bearings. Symbols for quantities
BS ISO 15241:2012. Rolling bearings. Symbols for physical quantities
BS ISO 15242-1:2004. Rolling bearings. Measuring methods for vibrationFundamentals
BS ISO 15242-2:2004. Rolling bearings. Measuring methods for vibrationRadial ball bearings with cylindrical bore and outside surface
BS ISO 15242-3:2006. Rolling bearings. Measuring methods for vibrationRadial spherical and tapered roller bearings with cylindrical bore and outside surface
BS ISO 15242-4:2007. Rolling bearings. Measuring methods for vibrationRadial cylindrical roller bearings with cylindrical bore and outside surface
BS ISO 15261:2004. Vibration and shock generating systems. Vocabulary
BS ISO 15312:2003. Rolling bearings. Thermal speed rating. Calculation and coefficients
BS ISO 15314:2004. Plastics. Methods for marine exposure
BS ISO 15319:1999. Recycled pulps. Estimation of visible contraries by instrumental means using reflected light
BS ISO 15319:1999. Recycled pulps. Estimation of visible contraries by instrumental means using reflected light
BS ISO 15323:2002. Dried milk protein products. Determination of nitrogen solubility index
BS ISO 15337:2009. Ambient air. Gas phase titration. Calibration of analysers for ozone
BS ISO 15348:2002. Pipework. Metal bellows expansion joints. General
BS ISO 15359:1999. Paper and board. Determination of the static and kinetic coefficients of friction. Horizontal plane method
BS ISO 15360-1:2000
BS ISO 15360-1:2000. Recycled pulps. Estimation of stickies and plasticsVisual method
BS ISO 15360-1:2000. Recycled pulps. Estimation of stickies and plasticsVisual method
BS ISO 15361:2000. Pulps. Determination of zero-span tensile strength, wet or dry
BS ISO 15364:2007. Ships and marine technology. Pressure/vacuum valves for cargo tanks
BS ISO 15368:2001. Optics and optical instruments. Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
BS ISO 15370:2001. Ships and marine technology. Low location lighting on passenger ships. Arrangement
BS ISO 15370:2010. Ships and marine technology. Low-location lighting (LLL) on passenger ships. Arrangement
BS ISO 15371:2000. Ships and marine technology. Fire-extinguishing systems for protection of galley deep-fat cooking equipment. Fire tests
BS ISO 15371:2009. Ships and marine technology. Fire-extinguishing systems for protection of galley cooking equipment
BS ISO 15372:2000. Ships and marine technology. Inflatable rescue boats. Coated fabrics for inflatable chambers
BS ISO 15373:2001. Plastics. Polymer dispersions. Determination of free formaldehyde
BS ISO 15374:1998. Implants for surgery. Requirements for production of forgings
BS ISO 15375:2004. Hanging devices for multiple use with infusion bottles. Requirements and test methods
BS ISO 15375:2010. Medical infusion bottles. Suspension devices for multiple use. Requirements and test methods
BS ISO 15379-1:2004. Carbonaceous materials for the production of aluminium. Cathode block materialsDetermination of the expansion due to sodium penetration with application of pressure
BS ISO 15379-2:2004. Carbonaceous materials for the production of aluminium. Cathode block materialsDetermination of the expansion due to sodium penetration without application of pressure
BS ISO 15380:2002. Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HETG, HEPG, HEES and HEPR
BS ISO 15380:2011. Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for categories HETG, HEPG, HEES and HEPR
BS ISO 15388:2012. Space systems. Contamination and cleanliness control
BS ISO 15389:2001. Space systems. Flight-to-ground umbilicals
BS ISO 15390:2004. Space environment (natural and artificial). Galactic cosmic ray model
BS ISO 15392:2008. Sustainability in building construction. General principles
BS ISO 15394:2000. Packaging. Bar code and two-dimensional symbols for shipping, transport and receiving labels
BS ISO 15394:2009. Packaging. Bar code and two-dimensional symbols for shipping, transport and receiving labels
BS ISO 15396:2007. Space data and information transfer systems. Cross support reference model. Space link extension services
BS ISO 15398:2012. Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas
BS ISO 1540:2006. Aerospace. Characteristics of aircraft electrical systems
BS ISO 15401:2000. Ships and marine technology. Bulk carriers. Construction quality of hull structure
BS ISO 15402:2000. Ships and marine technology. Bulk carriers. Repair quality of hull structure
BS ISO 15403:2000. Natural gas. Designation of the quality of natural gas for use as a compressed fuel for vehicles
BS ISO 15407-1:2000. Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mmMounting interface surfaces without electrical connector
BS ISO 15407-2:2003. Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mmMounting interface surfaces with optional electrical connector
BS ISO 15459-1:1999. Information technology. Unique identification of transport unitsGeneral
BS ISO 15469:1997. Spatial distribution of daylight. CIE standard overcast sky and clear sky
BS ISO 15469:2004. Spatial distribution of daylight. CIE standard general sky
BS ISO 15470:2004. Surface chemical analysis. X-ray photoelectron spectroscopy. Description of selected instrumental performance parameters
BS ISO 15471:2004. Surface chemical analysis. Auger electron spectroscopy. Description of selected instrumental performance parameters
BS ISO 15472:2001. Surface chemical analysis. X-ray photoelectron spectrometers. Calibration of energy scales
BS ISO 15472:2010. Surface chemical analysis. X-ray photoelectron spectrometers. Calibration of energy scales
BS ISO 15484:2008. Road vehicles. Brake lining friction materials. Product Definition and quality assurance
BS ISO 15489-1:2001. Information and documentation. Records managementGeneral
BS ISO 15490:2000. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for tensile strength of monolithic ceramics at room temperature
BS ISO 15490:2008. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for tensile strength of monolithic ceramics at room temperature
BS ISO 155:1998. Belt drives. Pulleys. Limiting values for adjustment of centres
BS ISO 15500-13:2012. Road vehicles. Compressed natural gas (CNG) fuel system componentsPressure relief device (PRD)
BS ISO 15500-14:2012. Road vehicles. Compressed natural gas (CNG) fuel system componentsExcess flow valve
BS ISO 15500-16:2012. Road vehicles. Compressed natural gas (CNG) fuel system componentsRigid fuel line in stainless steel
BS ISO 15500-17:2012. Road vehicles. Compressed natural gas (CNG) fuel system componentsFlexible fuel line
BS ISO 15500-18:2012. Road vehicles. Compressed natural gas (CNG) fuel system componentsFilter
BS ISO 15500-19:2012. Road vehicles. Compressed natural gas (CNG) fuel system componentsFittings
BS ISO 15500-2:2012. Road vehicles. Compressed natural gas (CNG) fuel system componentsPerformance and general test methods
BS ISO 15500-3:2012. Road vehicles. Compressed natural gas (CNG) fuel system componentsCheck valve
BS ISO 15500-4:2012. Road vehicles. Compressed natural gas (CNG) fuel system componentsManual valve
BS ISO 15500-5:2012. Road vehicles. Compressed natural gas (CNG) fuel system componentsManual cylinder valve
BS ISO 15500-6:2012. Road vehicles. Compressed natural gas (CNG) fuel system componentsAutomatic valve
BS ISO 15500-9:2012. Road vehicles. Compressed natural gas (CNG) fuel system componentsPressure regulator
BS ISO 15501-1:2012. Road vehicles. Compressed natural gas (CNG) fuel systemsSafety requirements
BS ISO 15509:2001. Adhesives. Determination of the bond strength of engineering-plastic joints
BS ISO 15510:2010. Stainless steels. Chemical composition
BS ISO 15511:2003. Information and documentation. International standard identifier for libraries and related organizations (ISIL)
BS ISO 15511:2009. Information and documentation. International standard identifier for libraries and related organizations (ISIL)
BS ISO 15511:2011. Information and documentation. International standard identifier for libraries and related organizations (ISIL)
BS ISO 15513:2000. Cranes. Competency requirements for crane drivers (operators), slingers, signallers and assessors
BS ISO 15516:2006. Ships and marine technology. Launching appliances for davit-launched lifeboats
BS ISO 15517:2003+A1:2012. Tobacco. Determination of nitrate content. Continuous-flow analysis method
BS ISO 15519-1:2010. Specification for diagrams for process industryGeneral rules
BS ISO 15524:2011. Pneumatic fluid power. Cylinders. Single-rod short-stroke cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm
BS ISO 15527:2007. Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods
BS ISO 15529:1999. Optics and optical instruments. Optical transfer function. Principles of measurement of modular transfer function (MTF) of sampled imaging systems
BS ISO 15529:2007. Optics and photonics. Optical transfer function. Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
BS ISO 15529:2010. Optics and photonics. Optical transfer function. Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
BS ISO 15550:2002. Internal combustion engines. Determination and method for the measurement of engine power. General requirements
BS ISO 15552:2004. Pneumatic fluid power. Cylinders with detachable mountings, 1 000 kPa 10 bar series, bores from 32 mm to 320 mm. Basic, mounting and accessories dimensions
BS ISO 15553:2006. Water quality. Isolation and identification of Cryptosporidium oocysts and Giardia cysts from water
BS ISO 15554:1998. Practice for dosimetry in gamma irradiation facilities for food processing
BS ISO 15555:1998. Practice for use of a ceric-cerous sulfate dosimetry system
BS ISO 15556:1998. Guide for selection and calibration of dosimetry systems for radiation processing
BS ISO 15557:1998. Practice for use of a radiochromic film dosimetry system
BS ISO 15558:1998. Practice for use of a polymethylmethacrylate dosimetry system
BS ISO 15559:1998. Practice for use of a radiochromic optical waveguide dosimetry system
BS ISO 15560:1998. Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory
BS ISO 15561:1998. Practice for use of a dichromate dosimetry system
BS ISO 15562:1998. Practice for dosimetry in electron and bremsstrahlung irradiation facilities for food processing
BS ISO 15563:1998. Practice for use of the ethanol-chlorobenzene dosimetry system
BS ISO 15564:1998. Guide for use of radiation-sensitive indicators
BS ISO 15565:1998. Practice for use of a radiochromic liquid dosimetry system
BS ISO 15566:1998. Practice for use of the alanine-EPR dosimetry system
BS ISO 15567:1998. Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing
BS ISO 15568:1998. Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
BS ISO 15569:1998. Practice for dosimetry in an electron-beam facility for radiation processing at energies between 300 keV and 25 MeV
BS ISO 15570:1998. Practice for use of cellulose acetate dosimetry system
BS ISO 15571:1998. Practice for dosimetry in a gamma irradiation facility for radiation processing
BS ISO 15572:1998. Guide for estimating uncertainties in dosimetry for radiation processing
BS ISO 15573:1998. Practice for dosimetry in an electron-beam facility for radiation processing at energies between 80 keV and 300 keV
BS ISO 15583:2005. Ships and marine technology. Maritime standards list
BS ISO 15585:2006. Hard coal. Determination of caking index
BS ISO 15589-2:2012. Petroleum, petrochemical and natural gas industries. Cathodic protection of pipeline transportation systemsOffshore pipelines
BS ISO 15592-1:2001. Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysisSampling
BS ISO 15592-2:2001. Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysisAtmosphere for conditioning and testing
BS ISO 15592-3:2003. Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysisDetermination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and nicotine, and calculation of nicotine-free dry particulate matter
BS ISO 15592-3:2008. Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysisDetermination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and nicotine, and calculation of nicotine-free dry particulate matter
BS ISO 15593:2001. Environmental tobacco smoke. Estimation of its contribution to respirable suspended particles. Determination of particulate matter by ultraviolet absorbance and by fluorescence
BS ISO 15597:2001, BS 2000-503:2004. Methods of test for petroleum and its products. BS 2000-503. Determination of chlorine and bromine content. Wavelength-dispersive X-ray fluorescence spectrometry
BS ISO 15600:2000. Tools for moulding. Thermal insulating sheets for injection moulds
BS ISO 15619:2013. Reciprocating internal combustion engines. Measurement method for exhaust silencers. Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio
BS ISO 15621:1999. Urine-absorbing aids. General guidance on evaluation
BS ISO 15621:2011. Urine-absorbing aids. General guidelines on evaluation
BS ISO 15622:2010. Intelligent transport systems. Adaptive cruise control systems. Performance requirements and test procedures
BS ISO 15623:2013. Intelligent transport systems. Forward vehicle collision warningsystems. Performance requirements and test procedures
BS ISO 15628:2007. Road transport and traffic telematics. Dedicated short range communication (DSRC). DSRC application layer
BS ISO 15629:2002. Pallets for materials handling. Quality of fasteners for assembly of new and repair of used, flat, wooden pallets
BS ISO 15632:2002. Microbeam analysis. Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors
BS ISO 15632:2012. Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
BS ISO 15633:2009. Iron ores. Determination of nickel. Flame atomic absorption spectrometric method
BS ISO 15634:2005. Iron ores. Determination of chromium content. Flame atomic absorption spectrometric method
BS ISO 15635:2001. Coated abrasives. Flap discs
BS ISO 15636:2003. Back-up pads for vulcanized fibre discs
BS ISO 15637-1:2002. Holding fixtures of cylindrical abrasive sleevesHolding fixtures with shank for hand-held grinding machines
BS ISO 15637-2:2002. Holding fixtures of cylindrical abrasive sleevesHolding fixtures for stationary machines
BS ISO 15638-1:2012. Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV)Framework and architecture
BS ISO 15638-2:2013. Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV)Common platform parameters using CALM
BS ISO 15638-3:2013. Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV)Operating requirements, "Approval Authority" procedures, and enforcement provisions for the providers of regulated services
BS ISO 15638-5:2013. Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV)Generic vehicle information
BS ISO 15638-7:2013. Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV)Other applications
BS ISO 15643:2002+A1:2012. Road construction and maintenance equipment. Bituminous binder spreaders/sprayers. Terminology and commercial specifications
BS ISO 15644:2002. Road construction and maintenance equipment. Chippings spreaders. Terminology and commercial specifications
BS ISO 15645:2002+A1:2013. Road construction and maintenance equipment. Road milling machinery.Terminology and commercial specifications
BS ISO 15648:2004. Butter. Determination of salt content. Potentiometric method
BS ISO 15649:2001. Petroleum and natural gas industries. Piping
BS ISO 15663-2:2001. Petroleum and natural gas industries. Life cycle costingGuidance on application of methodology and calculation methods
BS ISO 15663-3:2001. Petroleum and natural gas industries. Life cycle costingImplementation guidelines
BS ISO 15664:2001. Acoustics. Noise control design procedures for open plant
BS ISO 15665:2003. Acoustics. Acoustic insulation for pipes, valves and flanges
BS ISO 15668:1999. Banking. Secure file transfer (retail)
BS ISO 15671:2000. Rubber and rubber additives. Determination of total sulfur content using an automatic analyser
BS ISO 15672:2000. Rubber and rubber additives. Determination of total nitrogen content using an automatic analyser
BS ISO 15674:2001. Cardiovascular implants and artificial organs. Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags
BS ISO 15674:2009. Cardiovascular implants and artificial organs. Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags
BS ISO 15675:2001. Cardiovascular implants and artificial organs. Cardiopulmonary bypass systems. Arterial line blood filters
BS ISO 15675:2009. Cardiovascular implants and artificial organs. Cardiopulmonary bypass systems. Arterial blood line filters
BS ISO 15686-1:2000. Buildings and constructed assets. Service life planningGeneral principles
BS ISO 15686-1:2011. Buildings and constructed assets. Service life planningGeneral principles and framework
BS ISO 15686-10:2010. Buildings and constructed assets. Service life planningWhen to assess functional performance
BS ISO 15686-2:2001. Buildings and constructed assets. Service life planningService life prediction procedures
BS ISO 15686-2:2012. Buildings and constructed assets. Service life planningService life prediction procedures
BS ISO 15686-3:2002. Buildings and constructed assets. Service life planningPerformance audits and reviews
BS ISO 15686-5:2008. Buildings and constructed assets. Service life planningLife cycle costing
BS ISO 15686-6:2004. Buildings and constructed assets. Service life planningProcedures for considering environmental impacts
BS ISO 15686-7:2006. Buildings and constructed assets. Service life planningPerformance evaluation for feedback of service life data from practice
BS ISO 15686-8:2008. Buildings and constructed assets. Service-life planningReference service life and service-life estimation
BS ISO 15688:2012. Road construction and maintenance equipment. Soil stabilizers. Terminology and commercial specifications
BS ISO 15705:2002, BS 6068-2.80:2002. Water quality. Determination of the chemical oxygen demand index (ST-COD). Small-scale sealed-tube method
BS ISO 15706-1:2002+A1:2008. Information and documentation. International Standard Audiovisual Number (ISAN)Audiovisual work identifier
BS ISO 15706-2:2007. Information and documentation. International Standard Audiovisual Number (ISAN)Version identifier
BS ISO 15707:2001. Information and documentation. International standard musical work code (ISWC)
BS ISO 15713:2006. Stationary source emissions. Sampling and determination of gaseous fluoride content
BS ISO 15724:2001. Metallic and other inorganic coatings. Electrochemical measurement of diffusible hydrogen in steels. Barnacle electrode method
BS ISO 15726:2009. Metallic coatings and other inorganic coatings. Electrodeposited zinc alloys with nickel, cobalt or iron
BS ISO 15730:2000. Metallic and other inorganic coatings. Electropolishing as a means of smoothing and passivating stainless steel
BS ISO 15734:2001. Ships and marine technology. Hydrostatic release units
BS ISO 15736:2006. Ships and marine technology. Pyrotechnic life-saving appliances. Testing, inspection and marking of production units
BS ISO 15738:2002. Ships and marine technology. Gas inflation systems for inflatable life-saving appliances
BS ISO 15739:2003. Photography. Electronic still-picture imaging. Noise measurements
BS ISO 15739:2013. Photography. Electronic still-picture imaging. Noise measurements
BS ISO 15740:2005. Photography. Electronic still picture imaging. Picture transfer protocol (PTP) for digital still photography devices
BS ISO 15740:2008. Photography. Electronic still picture imaging. Picture transfer protocol (PTP) for digital still photography devices
BS ISO 15740:2013. Photography. Electronic still picture imaging. Picture transfer protocol (PTP) for digital still photography devices
BS ISO 15741:2001. Paints and varnishes. Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases
BS ISO 15752:2000. Ophthalmic instruments. Endoilluminators. Fundamental requirements and test methods for optical radiation safety
BS ISO 15754:2009. Paper and board. Determination of z-directional tensile strength
BS ISO 15765-1:2011. Road vehicles. Diagnostic communication over controller area network (DoCAN)General information and use case definition
BS ISO 15765-2:2011. Road vehicles. Diagnostic communication over controller area network (DoCAN)Transport protocol and network layer services
BS ISO 15765-4:2011+A1:2013. Road vehicles. Diagnostic communication over Controller Area Network (DoCAN)Requirements for emissions-related systems
BS ISO 15767:2003. Workplace atmospheres. Controlling and characterizing errors in weighing collected aerosols
BS ISO 15767:2009. Workplace atmospheres. Controlling and characterizing uncertainty in weighing collected aerosols
BS ISO 15769:2010. Hydrometry. Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods
BS ISO 15781:2013. Photography. Digital still cameras. Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time
BS ISO 15782-1:2009. Certificate management for financial servicesPublic key certificates
BS ISO 15786:2008. Technical drawings. Simplified representation and dimensioning of holes
BS ISO 15790:2004. Graphic technology and photography. Certified reference materials for reflection and transmission metrology. Documentation and procedures for use, including determination of combined standard uncertainty
BS ISO 15794:2001. Bi-directional and multi-directional fork-lift trucks. Stability tests
BS ISO 15795:2002. Optics and photonics. Quality evaluation of optical systems. Assessing the image quality degradation due to chromatic aberrations
BS ISO 15799:2003. Soil quality. Guidance on the ecotoxicological characterization of soils and soil materials
BS ISO 15817:2005. Earth-moving machinery. Safety requirements for remote operator control
BS ISO 15817:2012. Earth-moving machinery. Safety requirements for remote operator control systems
BS ISO 15819:2008. Cosmetics. Analytical methods. Nitrosamines. Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC-MS-MS
BS ISO 15825:2004. Rubber compounding ingredients. Carbon black. Determination of aggregate size distribution by disc centrifuge photosedimentory
BS ISO 15829:2004. Road vehicles. Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation
BS ISO 15829:2013. Road vehicles. Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation
BS ISO 15830-1:2005. Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummyTerminology and rationale
BS ISO 15830-1:2013. Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummyTerminology and rationale
BS ISO 15830-2:2005. Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummyMechanical subsystems
BS ISO 15830-2:2013. Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummyMechanical subsystems
BS ISO 15830-3:2005. Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummyElectronic subsystems
BS ISO 15830-3:2013. Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummyElectronic subsystems
BS ISO 15830-4:2005. Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummyUser's manual
BS ISO 15830-4:2013. Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side impact dummyUser's manual
BS ISO 15836:2003. Information and documentation. The Dublin Core metadata element set
BS ISO 15836:2009. Information and documentation. The Dublin Core metadata element setThe Dublin Core metadata element set
BS ISO 15837:2004. Ships and marine technology. Gasketed mechanical couplings for use in piping systems. Performance specification
BS ISO 15838:2003. Ships and marine technology. Fittings for use with gasketed mechanical couplings used in piping applications. Performance specification.
BS ISO 15840:2004. Ships and marine technology. Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications
BS ISO 15849:2001. Ships and marine technology. Guidelines for implementation of a fleet management system network
BS ISO 15850:2002. Plastics. Determination of tension-tension fatigue crack propagation. Linear elastic fracture mechanics (LEFM) approach
BS ISO 15856:2010. Space systems. Space environment. Simulation guidelines for radiation exposure of non-metallic materials
BS ISO 15859-1:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methodsOxygen
BS ISO 15859-10:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methodsWater
BS ISO 15859-11:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methodsAmmonia
BS ISO 15859-12:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methodsCarbon dioxide
BS ISO 15859-13:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methodsBreathing air
BS ISO 15859-2:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methodsHydrogen
BS ISO 15859-3:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methodsNitrogen
BS ISO 15859-4:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methodsHelium
BS ISO 15859-5:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methodsNitrogen tetroxide propellants
BS ISO 15859-6:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methodsMonomethylhydrazine propellant
BS ISO 15859-7:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methodsHydrazine propellant
BS ISO 15859-8:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methodsKerosine propellant
BS ISO 15859-9:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methodsArgon
BS ISO 15860:2006. Space systems. Gas contamination. Measurement methods for field tests
BS ISO 15862:2009. Space systems. Launch-vehicle-to-spacecraft flight environments telemetry data processing
BS ISO 15863:2003. Space systems. Spacecraft-to-launch-vehicle interface control document
BS ISO 15864:2004. Space systems. General test methods for space craft, subsystems and units
BS ISO 15870:2000. Powered industrial trucks. Safety signs and hazard pictorials. General principles
BS ISO 15871:2000. Industrial trucks. Specification for indicator lights for container handling and grappler arm operations
BS ISO 15872:2002. Aerospace. UNJ threads. Gauging
BS ISO 15884:2002. Milk fat. Preparation of fatty acid methyl esters
BS ISO 15885:2002. Milk fat. Determination of fatty acid composition by gas-liquid chromatography
BS ISO 15886-1:2004. Agricultural irrigation equipmentDefinition of terms and classification
BS ISO 15886-1:2012. Agricultural irrigation equipment. SprinklersDefinition of terms and classification
BS ISO 15886-3:2004. Agricultural irrigation equipment. SprinklersCharacterization of distribution and test methods
BS ISO 15886-3:2012. Agricultural irrigation equipment. SprinklersCharacterization of distribution and test methods
BS ISO 15887:2013. Space data and information transfer systems. Lossless data compression
BS ISO 15889:2003. Space data and information transfer systems. Data description language. EAST specification
BS ISO 15889:2011. Space data and information transfer systems. The data description language EAST specification
BS ISO 15893:2010. Space data and information transfer systems. Space communications protocol specification (SCPS). Transport protocol (SCPS-TP)
BS ISO 15900:2009. Determination of particle size distribution. Differential electrical mobility analysis for aerosol particles
BS ISO 15901-1:2005. Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorptionMercury porosimetry
BS ISO 15901-2:2006. Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorptionAnalysis of mesopores and macropores by gas adsorption
BS ISO 15901-3:2007. Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorptionAnalysis of micropores by gas adsorption
BS ISO 15902:2004. Optics and photonics. Diffractive optics. Vocabulary
BS ISO 15903:2002. Soil quality. Format for recording soil and site information
BS ISO 15906:2007. Carbonaceous materials for the production of aluminium. Baked anodes. Determination of the air permeability
BS ISO 15911:2000, BS 2000-355:2001. Methods of test for petroleum and its products. Estimation of net specific energy of aviation turbine fuels using hydrogen content data
BS ISO 15917:2007. Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials. Dimensions
BS ISO 15917:2012. Solid ball-nosed end mills with cylindrical shanks, made of carbide and ceramic materials
BS ISO 15928-1:2003. Houses. Description of performanceStructural safety
BS ISO 15928-2:2005. Houses. Description of performanceStructural serviceability
BS ISO 15929:2002. Graphic technology. Prepress digital data exchange. Guidelines and principles for the development of PDF/X standards
BS ISO 15930-1:2001. Graphic technology. Prepress digital data exchange. Use of PDFComplete exchange using CMYK data (PDF/X-1) and PDF/X-1a)
BS ISO 15930-7:2008. Graphic technology. Prepress digital data exchange using PDFComplete exchange of printing data (PDF/X-4) and partial exchange of printing data with external profile reference (PDF/X-4p) using PDF 1.6
BS ISO 15930-7:2010. Graphic technology. Prepress digital data exchange using PDFComplete exchange of printing data (PDF/X-4) and partial exchange of printing data with external profile reference PDF/X-4p) using PDF 1.6
BS ISO 15930-8:2008. Graphic technology. Prepress digital data exchange using PDFPartial exchange of printing data using PDF 1.6 (PDF/X-5)
BS ISO 15930-8:2010. Graphic technology. Prepress digital data exchange using PDFPartial exchange of printing data using PDF 1.6 (PDF/X-5)
BS ISO 15967:2007. Direct reduced iron. Determination of the tumble and abrasion indices of hot briquetted iron (HBI)
BS ISO 15970:2008. Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor
BS ISO 15971:2008. Natural gas. Measurement of properties. Calorific value and Wobbe index
BS ISO 15985:2004. Plastics. Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions. Method by analysis of released biogas
BS ISO 15987:2003. Plastics. Film and sheeting. Biaxially oriented polyamide (nylon) films
BS ISO 15988:2003. Plastics. Film and sheeting. Biaxially oriented poly(ethylene terephthalate) (PET) films
BS ISO 15994:2005. Graphic technology. Testing of prints. Visual lustre
BS ISO 15995:2006. Gas cylinders. Specification and testing of LPG cylinder valves. Manually operated
BS ISO 16000-13:2008. Indoor airDetermination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs). Collection on sorbent-backed filters
BS ISO 16000-14:2009. Indoor airDetermination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs). Extraction, clean-up and analysis by high-resolution gas chromatography and mass spectrometry
BS ISO 16000-16:2008. Indoor airDetection and enumeration of moulds. Sampling by filtration
BS ISO 16000-17:2008. Indoor airDetection and enumeration of moulds. Culture-based method
BS ISO 16000-18:2011. Indoor airDetection and enumeration of moulds. Sampling by impaction
BS ISO 16000-19:2012. Indoor airSampling strategy for moulds
BS ISO 16000-23:2009. Indoor airPerformance test for evaluating the reduction of formaldehyde concentrations by sorptive building materials
BS ISO 16000-24:2009. Indoor airPerformance test for evaluating the reduction of volatile organic compound (except formaldehyde) concentrations by sorptive building materials
BS ISO 16000-25:2011. Indoor airDetermination of the emission of semi-volatile organic compounds by building products. Micro-chamber method
BS ISO 16000-28:2012. Indoor airDetermination of odour emissions from building products using test chambers
BS ISO 16000-3:2001. Indoor airDetermination of formaldehyde and other carbonyl compounds. Active sampling method
BS ISO 16000-3:2011. Indoor airDetermination of formaldehyde and other carbonyl compounds in indoor air and test chamber air. Active sampling method
BS ISO 16000-4:2004. Indoor airDetermination of formaldehyde. Diffusive sampling method
BS ISO 16000-4:2011. Indoor airDetermination of formaldehyde. Diffusive sampling method
BS ISO 16000-6:2011. Indoor airDetermination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID
BS ISO 16000-8:2007. Indoor airDetermination of local mean ages of air in buildings for characterizing ventilation conditions
BS ISO 16001:2008. Earth-moving machinery. Hazard detection systems and visual aids. Performance requirements and tests
BS ISO 16004:2005. Aircraft ground equipment. Passenger boarding bridge or transfer vehicle. Requirements for interface with aircraft doors
BS ISO 16014-1:2003. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatographyGeneral principles
BS ISO 16014-1:2012. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatographyGeneral principles
BS ISO 16014-2:2003. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatographyUniversal calibration method
BS ISO 16014-2:2012. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatographyUniversal calibration method
BS ISO 16014-3:2003. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatographyLow-temperature method
BS ISO 16014-3:2012. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatographyLow-temperature method
BS ISO 16014-4:2003. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatographyHigh-temperature method
BS ISO 16014-4:2012. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatographyHigh-temperature method
BS ISO 16016:2000. Technical product documentation. Protection notices for restricting the use of documents and products
BS ISO 16020:2005. Steel for the reinforcement and prestressing of concrete. Vocabulary
BS ISO 16028:1999. Hydraulic fluid power. Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar). Specifications
BS ISO 16030:2001. Pneumatic fluid power. Connections. Ports and stud ends
BS ISO 16031-1:2002. Aerospace fluid systems. O-rings, inch series. Inside diameters and cross sections, tolerances and size-identification codesClose tolerances for hydraulic systems
BS ISO 16031-2:2003. Aerospace fluid systems. O-Rings, inch series. Inside diameters and cross sections, tolerances and size-identification codesStandard tolerances for non-hydraulic systems
BS ISO 16038:2005. Rubber condoms. Guidance on the use of ISO 4074 in the quality management of natural rubber latex condoms
BS ISO 16039:2004+A1:2013. Road construction and maintenance equipment. Slipform pavers. Definitions and commercial specifications
BS ISO 16042:2007. Iron ores. Guidelines for the use of certified reference materials (CRMs)
BS ISO 16049-1:2001. Air cargo equipment. Restraint strapsDesign criteria and testing methods
BS ISO 16049-1:2013. Air cargo equipment. Restraint strapsDesign criteria and testing methods
BS ISO 16049-2:2013. Air cargo equipment. Restraint strapsUtilization guidelines and lashing calculations
BS ISO 16055:2003. Tobacco and tobacco products. Monitor test piece. Requirements and use
BS ISO 16055:2012. Tobacco and tobacco products. Monitor test piece. Requirements and use
BS ISO 16057:2002. Coated abrasives. Vulcanized fibre discs
BS ISO 16063-1:1998. Methods for the calibration of vibration and shock transducersBasic concepts
BS ISO 16063-11:1999. Methods for the calibration of vibration and shock transducersPrimary vibration calibration by laser interferometry
BS ISO 16063-12:2002. Methods for the calibration of vibration and shock transducersPrimary vibration calibration by the reciprocity method
BS ISO 16063-13:2001. Methods for the calibration of vibration and shock transducersPrimary shock calibration using laser interferometry
BS ISO 16063-15:2006. Methods for the calibration of vibration and shock transducersPrimary angular vibration calibration by laser interferometry
BS ISO 16063-21:2003. Methods for the calibration of vibration and shock transducersVibration calibration by comparison to a reference transducer
BS ISO 16063-22:2005. Methods for the calibration of vibration and shock transducersShock calibration by comparison to a reference transducer
BS ISO 16063-31:2009. Methods for the calibration of vibration and shock transducersTesting of transverse vibration sensitivity
BS ISO 16063-41:2011. Methods for the calibration of vibration and shock transducersCalibration of laser vibrometers
BS ISO 16065-1:2001. Pulps. Determination of fibre length by automated optical analysisPolarized light method
BS ISO 16065-2:2007. Pulps. Determination of fibre length by automated optical analysisUnpolarized light method
BS ISO 16067-1:2003. Photography. Spatial resolution measurements for electronic scanners for photographic imagesScanners for reflective media
BS ISO 16067-2:2004. Photography. Electronic scanners for photographic images. Spatial resolution measurementsFilm scanners
BS ISO 16069:2004. Graphical symbols. Safety signs. Safety way guidance systems (SWGS)
BS ISO 16073:2011. Wildland firefighting personal protective equipment. Requirements and test methods
BS ISO 16107:1999. Workplace atmospheres. Protocol for evaluating the performance of diffusive samplers
BS ISO 16107:2007. Workplace atmospheres. Protocol for evaluating the performance of diffusive samplers
BS ISO 16110-1:2007. Hydrogen generators using fuel processing technologiesSafety
BS ISO 16110-2:2010. Hydrogen generators using fuel processing technologiesTest methods for performance
BS ISO 16111:2008. Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride
BS ISO 16121-1:2005. Road vehicles. Ergonomic requirements for the driver's workplace in line-service busesGeneral description, basic requirements
BS ISO 16121-1:2012. Road vehicles. Ergonomic requirements for the driver’s workplace in line-service busesGeneral description, basic requirements
BS ISO 16121-2:2005. Road vehicles. Ergonomic requirements for the driver's workplace in line-service busesVisbility
BS ISO 16121-2:2011. Road vehicles. Ergonomic requirements for the driver's workplace in line-service busesVisibility
BS ISO 16121-3:2005. Road vehicles. Ergonomic requirements for the driver's workplace in line-service busesInformation devices and controls
BS ISO 16121-3:2011. Road vehicles. Ergonomic requirements for the driver's workplace in line-service busesInformation devices and controls
BS ISO 16121-4:2005. Road vehicles. Ergonomic requirements for the driver's workplace in line-service busesCabin environment
BS ISO 16121-4:2011. Road vehicles. Ergonomic requirements for the driver's workplace in line-service busesCabin environment
BS ISO 16124:2004. Steel wire rod. Dimensions and tolerances
BS ISO 16129:2012. Surface chemical analysis. X-ray photoelectron spectroscopy. Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
BS ISO 16131:2012. Leather. Upholstery leather characteristics. Selection of leather for furniture
BS ISO 16132:2004. Ductile iron pipes and fittings. Seal coats for cement mortar linings
BS ISO 16134:2006. Earthquake- and subsidence-resistant design of ductile iron pipelines
BS ISO 16145-4:2013. Ships and marine technology. Protective coatings and inspection methodAutomated measuring method for the total amount of water-soluble salts
BS ISO 16149:2006. Agricultural irrigation equipment. PVC above-ground low-pressure pipe for surface irrigation. Specifications and test methods
BS ISO 16152:2005. Plastics. Determination of xylene-soluble matter in polypropylene
BS ISO 16154:2005. Tractors and machinery for agriculture and forestry. Installation of lighting, light signalling and marking devices for travel on public roadways
BS ISO 16155:2006. Ships and marine technology. Computer applications. Shipboard loading instruments
BS ISO 16156:2004. Machine-tools safety. Safety requirements for the design and construction of work holding chucks
BS ISO 16159:2012. Space systems. Launch pad and integration site. Facility, system and equipment failure analysis
BS ISO 16160:2005. Continuously hot-rolled steel sheet products. Dimensional and shape tolerances
BS ISO 16160:2011. Continuously hot-rolled steel sheet products. Dimensional and shape tolerances
BS ISO 16160:2012. Hot-rolled steel sheet products. Dimensional and shape tolerances
BS ISO 16162:2005. Continuously cold-rolled steel sheet products. Dimensional and shape tolerances
BS ISO 16162:2010. Continuously cold-rolled steel sheet products. Dimensional and shape tolerances
BS ISO 16162:2012. Cold-rolled steel sheet products. Dimensional and shape tolerances
BS ISO 16163:2005. Continuously hot-dipped coated steel sheet products. Dimensional and shape tolerances
BS ISO 16163:2010. Continuously hot-dipped coated steel sheet products. Dimensional and shape tolerances
BS ISO 16163:2012. Continuously hot-dipped coated steel sheet products. Dimensional and shape tolerances
BS ISO 16165:2001. Ships and marine technology. Marine environment protection. Terminology relating to oil spill response
BS ISO 16165:2013. Ships and marine technology. Marine environment protection. Terminology relating to oil spill response
BS ISO 16172:2006. Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe
BS ISO 16172:2011. Continuous hot-dip metallic coated steel sheet for corrugated steel pipe
BS ISO 16183:2002. Heavy duty engines. Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
BS ISO 16191:2013. Water quality. Determination of the toxic effect of sediment on the growth behaviour of Myriophyllum aquaticum
BS ISO 16192:2010. Space systems. Experience gained in space projects (Lessons learned). Principles and guidelines
BS ISO 16200-1:2001. Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatographyPumped sampling method
BS ISO 16200-2:2000. Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatographyDiffusive sampling method
BS ISO 16220:2005. Magnesium and magnesium alloys. Magnesium alloy ingots and castings
BS ISO 16221:2001, BS 6068-5.29:2001. Water quality. Guidance for determination of biodegradability in the marine environment
BS ISO 16232-1:2007. Road vehicles. Cleanliness of components of fluid circuitsVocabulary
BS ISO 16232-10:2007. Road vehicles. Cleanliness of components of fluid circuitsExpression of results
BS ISO 16232-2:2007. Road vehicles. Cleanliness of components of fluid circuitsMethod of extraction of contaminants by agitation
BS ISO 16232-3:2007. Road vehicles. Cleanliness of components of fluid circuitsMethod of extraction of contaminants by pressure rinsing
BS ISO 16232-4:2007. Road vehicles. Cleanliness of components of fluid circuitsMethod of extraction of contaminants by ultrasonic techniques
BS ISO 16232-5:2007. Road vehicles. Cleanliness of components of fluid circuitsMethod of extraction of contaminants on functional test bench
BS ISO 16232-6:2007. Road vehicles. Cleanliness of components of fluid circuitsParticle mass determination by gravimetric analysis
BS ISO 16232-7:2007. Road vehicles. Cleanliness of components of fluid circuitsParticle sizing and counting by microscopic analysis
BS ISO 16232-8:2007. Road vehicles. Cleanliness of components of fluid circuitsParticle nature determination by microscopic analysis
BS ISO 16232-9:2007. Road vehicles. Cleanliness of components of fluid circuitsParticle sizing and counting by automatic light extinction particle counter
BS ISO 16234:2006. Heavy commercial vehicles and buses. Straight-ahead braking on surfaces with split coefficient of friction. Open-loop test method
BS ISO 16236:2013. Crop protection equipment. Test method for the determination of drainable volume and its concentration
BS ISO 16241:2005. Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
BS ISO 16242:2011. Surface chemical analysis. Recording and reporting data in Auger electron spectroscopy (AES)
BS ISO 16243:2011. Surface chemical analysis. Recording and reporting data in X-ray photoelectron spectroscopy (XPS)
BS ISO 16245:2009. Information and documentation. Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents
BS ISO 16246:2005. Road vehicles. M12 x 1,25 spark-plugs with flat seating and 14 mm hexagon and their cylinder head housing
BS ISO 16247:2004. Road vehicles. Detection of exhaust systems leaks. Helium test method and detection device specification
BS ISO 16249:2013. Springs. Symbols
BS ISO 1625:1998. Plastics. Polymer dispersions. Determination of non-volatile matter (residue) at specified temperatures
BS ISO 16253:2007. Watch-cases and accessories. Vapour phase deposited coatings
BS ISO 16269-4:2010. Statistical interpretation of dataDetection and treatment of outliers
BS ISO 16269-6:2005. Statistical interpretation of dataDetermination of statistical tolerance intervals
BS ISO 16269-8:2004. Statistical interpretation of dataDetermination of prediction intervals
BS ISO 1628-5:1998, BS 2782-7:Method 732E:1998. Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometersThermoplastic polyester (TP) homopolymers and copolymers
BS ISO 16287:2005. Plain bearings. Thermoplastic bushes. Dimensions and tolerances
BS ISO 1629:1995+A1:2007. Rubber and latices. Nomenclature
BS ISO 1629:2013. Rubber and latices. Nomenclature
BS ISO 16290:2013. Space systems. Definition of the Technology Readiness Levels (TRLs) and their criteria of assessment
BS ISO 16297:2013. Milk. Bacterial count. Protocol for the evaluation of alternative methods
BS ISO 16304:2013. Ships and marine technology. Marine environment protection. Arrangement and management of port waste reception facilities
BS ISO 16305:2005. Butter. Determination of firmness
BS ISO 16322-1:2005. Textiles. Determination of spirality after launderingPercentage of wale spirality change in knitted garments
BS ISO 16322-3:2005. Textiles. Determination of spirality after launderingWoven and knitted garments
BS ISO 16329:2003. Ships and marine technology. Heading control systems for high-speed craft
BS ISO 16331-1:2012. Optics and optical instruments. Laboratory procedures for testing surveying and construction instrumentsPerformance of handheld laser distance meters
BS ISO 16333:2011. Heavy commercial vehicles and buses. Steady-state rollover threshold. Tilt-table test method
BS ISO 16334:2013. Monolithic refractory products. Determination of resistance to explosivespalling
BS ISO 16338:2013. Welding for aerospace applications. Resistance spot and seam welding
BS ISO 16343:2013. Energy performance of buildings. Methods for expressing energy performance and for energy certification of buildings
BS ISO 16346:2013. Energy performance of buildings. Assessment of overall energy performance
BS ISO 16354:2013. Guidelines for knowledge libraries and object libraries
BS ISO 16358-1:2013. Air-cooled air conditioners and air-to-air heat pumps. Testing and calculating methods for seasonal performance factorsCooling seasonal performance factor
BS ISO 16358-2:2013. Air-cooled air conditioners and air-to-air heat pumps. Testing and calculating methods for seasonal performance factorsHeating seasonal performance factor
BS ISO 16358-3:2013. Air-cooled air conditioners and air-to-air heat pumps. Testing and calculating methods for seasonal performance factorsAnnual performance factor
BS ISO 16362:2005. Ambient air. Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chromatography
BS ISO 16363:2012. Space data and information transfer systems. Audit and certification of trustworthy digital repositories
BS ISO 16366:2001. Tools for pressing. L-shaped guides
BS ISO 16366:2008. Tools for pressing. L-shaped guides
BS ISO 16367:2001. Tools for pressing. Guide plates. U- and V-blocks
BS ISO 16367:2008. Tools for pressing. Guide plates. U- and V-blocks
BS ISO 16368:2003. Mobile elevating work platforms. Design calculations, safety requirements and test methods
BS ISO 16384:2012. Refrigerated hydrocarbon and nonpetroleum based liquefied gaseous fuels. Dimethylether (DME). Measurement and calculation on board ships
BS ISO 16387:2004. Soil quality. Effects of pollutants on Enchytraeidae (Enchytraeus sp.). Determination of effects on reproduction and survival
BS ISO 16392:2007. Tyres. Electrical resistance. Test method for measuring electrical resistance of tyres on a test rig
BS ISO 16402:2008. Implants for surgery. Acrylic resin cement. Flexural fatigue testing of acrylic resin cements used in orthopaedics
BS ISO 1641-1:2003. End mills and slot drillsMilling cutters with cylindrical shanks
BS ISO 16412:2005. Air cargo equipment. Air cargo pallets. Utilization guidelines
BS ISO 1641-2:2011. End mills and slot drillsDimensions and designation of milling cutters with Morse taper shanks
BS ISO 1641-3:2003. End mills and slot drillsMilling cutters with 7/24 taper shanks
BS ISO 1641-3:2011. End mills and slot drillsDimensions and designation of milling cutters with 7/24 taper shanks
BS ISO 16413:2013. Evaluation of thickness, density and interface width of thin films by X-ray reflectometry. Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
BS ISO 16419:2013. Cork. Visual anomalies of cork stoppers for still wines
BS ISO 16420:2013. Cork. Cork stoppers for still wines. Mechanical and physical specifications
BS ISO 16422:2006. Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure. Specifications
BS ISO 16425:2013. Ships and marine technology. Guidelines for the installation of ship communication networks for shipboard equipment and systems
BS ISO 16428:2005. Implants for surgery. Test solutions and environmental conditions for static and dynamic corrosion tests on implantable materials and medical devices
BS ISO 16431:2012. Hydraulic fluid power. System clean-up procedures and verification of cleanliness of assembled systems
BS ISO 16437:2012. Ships and marine technology. Lifesaving and fire protection. Atmospheric oil mist detectors for ships
BS ISO 16438:2012. Agricultural irrigation equipment. Thermoplastic collapsible hoses for irrigation. Specifications and test methods
BS ISO 16446:2002. Ships and marine technology. Marine environmental protection. Adaptor for joining dissimilar boom connectors
BS ISO 16446:2013. Ships and marine technology. Marine environment protection. Adapter for joining dissimilar boom connectors
BS ISO 16454:2007. Space systems. Structural design. Stress analysis requirements
BS ISO 16458:2004. Space systems. Unmanned spacecraft transportation. General requirements
BS ISO 16462:2004. Cubic boron nitride inserts, tipped or solid. Dimensions, types
BS ISO 16463:2004. Polycrystalline diamond inserts, tipped. Dimensions, types
BS ISO 16468:2005. Investment castings (steel,nickel alloys and cobalt alloys). General technical requirements
BS ISO 16482-1:2013. Binders for paints and varnishes. Determination of the non-volatile-matter content of aqueous rosin-resin dispersionsOven method
BS ISO 16482-2:2013. Binders for paints and varnishes. Determination of the non-volatile-matter content of aqueous rosin-resin dispersionsMicrowave method
BS ISO 1652:2004. Rubber latex. Determination of apparent viscosity by the Brookfield test method
BS ISO 1652:2011. Rubber latex. Determination of apparent viscosity by the Brookfield test method
BS ISO 16528-1:2007. Boilers and pressure vesselsPerformance requirements
BS ISO 16528-2:2007. Boilers and pressure vesselsProcedures for fulfilling the requirements of ISO 16528-1
BS ISO 16531:2013. Surface chemical analysis. Depth profiling. Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
BS ISO 16532-1:2008. Paper and board. Determination of grease resistancePermeability test
BS ISO 16532-2:2007. Paper and board. Determination of grease resistanceSurface repellency test
BS ISO 16532-3:2010. Paper and board. Determination of grease resistanceTurpentine test for voids in glassine and greaseproof papers
BS ISO 16539:2013. Corrosion of metals and alloys. Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process. $0QDry$0R and $0Qwet$0R conditions at constant absolute humidity
BS ISO 16548:2012. Ships and marine technology. Ship design. General guidance on emergency towing procedures
BS ISO 16549:2004. Textiles. Unevenness of textile strands. Capacitance method
BS ISO 16564:2004. Rubber, raw natural. Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
BS ISO 16565:2002. Rubber. Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
BS ISO 16565:2008. Rubber. Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
BS ISO 16565:2013. Rubber. Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylenepropylene-diene (EPDM) terpolymers
BS ISO 1658:2009. Natural rubber (NR). Evaluation procedure
BS ISO 16587:2004. Mechanical vibration and shock. Performance parameters for condition monitoring of structures
BS ISO 16589-1:2001. Rotary shaft lip-type seals incorporating thermoplastic sealing elementsNominal dimensions and tolerances
BS ISO 16589-1:2011. Rotary shaft lip-type seals incorporating thermoplastic sealing elementsNominal dimensions and tolerances
BS ISO 16589-2:2001. Rotary shaft lip-type seals incorporating thermoplastic sealing elementsVocabulary
BS ISO 16589-2:2011. Rotary shaft lip-type seals incorporating thermoplastic sealing elementsVocabulary
BS ISO 16589-3:2001. Rotary shaft lip-type seals incorporating thermoplastic sealing elementsStorage, handling and installation
BS ISO 16589-3:2011. Rotary shaft lip-type seals incorporating thermoplastic sealing elementsStorage, handling and installation
BS ISO 16589-4:2001. Rotary shaft lip-type seals incorporating thermoplastic sealing elementsPerformance test procedures
BS ISO 16589-4:2011. Rotary shaft lip-type seals incorporating thermoplastic sealing elementsPerformance test procedures
BS ISO 16589-5:2001. Rotary shaft lip-type seals incorporating thermoplastic sealing elementsIdentification of visual imperfections
BS ISO 16589-5:2011. Rotary shaft lip-type seals incorporating thermoplastic sealing elementsIdentification of visual imperfections
BS ISO 16592:2006. Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method
BS ISO 16592:2012. Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method
BS ISO 16603:2004. Clothing for protection against contact with blood and body fluids. Determination of the resistance of protective clothing materials to penetration by blood and body fluids. Test method using synthetic blood
BS ISO 16604:2004. Clothing for protection against contact with blood and body fluids. Determination of resistance of protective clothing materials to penetration by blood-borne pathogens. Test method using Phi-X174 Bacteriophage
BS ISO 16609:2004. Banking. Requirements for message authentication using symmetric techniques
BS ISO 16609:2012. Financial services. Requirements for message authentication using symmetric techniques
BS ISO 16612-1:2005. Graphic techology. Variable printing data exchangeUsing PPML 2.1 and PDF 1.4 (PPML/VDX-2005)
BS ISO 16612-2:2010. Graphic technology. Variable data exchangeUsing PDF/X-4 and PDF/X-5 (PDF/VT-1 and PDF/VT-2)
BS ISO 16625:2013. Cranes and hoists. Selection of wire ropes, drums and sheaves
BS ISO 16628:2008. Tracheobronchial tubes. Sizing and marking
BS ISO 16632:2013. Tobacco and tobacco products. Determination of water content.Gas-chromatographic method
BS ISO 16635-1:2013. Dentistry. Dental rubber dam techniqueHole punch
BS ISO 16642:2003. Computer applications in terminology. Terminological markup framework
BS ISO 16649-1:2001. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of β-glucuronidase-positive Escherichia coliColony-count technique at 44°C using membranes and 5-bromo-4- chloro-3-indolyl-β-D-glucuronide
BS ISO 16649-2:2001. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of β-glucuronidase-positive Escherichia coliColony-count technique at 44°C using 5-bromo-4-chloro-3-indolyl-β-D-glucuronide
BS ISO 16653-1:2008. Mobile elevating work platforms. Design, calculations, safety requirements and test methods relative to special featuresMEWPs with retractable guardrail systems
BS ISO 16653-3:2011. Mobile elevating work platforms. Design, calculations, safety requirements and test methods relative to special featuresMEWPs for orchard operations
BS ISO 16656:2004. Hydraulic fluid power. Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar). Mounting dimensions
BS ISO 16657:2006. Sensory analysis. Apparatus. Olive oil tasting glass
BS ISO 16673:2007. Road vehicles. Ergonomic aspects of transport information and control systems. Occlusion method to assess visual demand due to the use of in-vehicle systems
BS ISO 16684-1:2012. Graphic technology. Extensible metadata platform (XMP) specificationData model, serialization and core properties
BS ISO 16698:2013. Space environment (natural and artificial). Methods for estimation of future geomagnetic activity
BS ISO 16700:2004. Microbeam analysis. Scanning electron microscopy. Guidelines for calibrating image magnification
BS ISO 16702:2001. Workplace air quality. Determination of total isocyanate groups in air using 2-(1-methoxyphenyl) piperazine and liquid chromatography
BS ISO 16702:2007. Workplace air quality. Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl) piperazine and liquid chromatography
BS ISO 16714:2008. Earth-moving machinery. Recyclability and recoverability. Terminology and calculation method
BS ISO 16732-1:2012. Fire safety engineering. Fire risk assessmentGeneral
BS ISO 16737:2012. Fire safety engineering. Requirements governing algebraic equations. Vent flows
BS ISO 16739:2013. Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries
BS ISO 16740:2005. Workplace air. Determination of hexavalent chromium in airborne particulate matter. Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
BS ISO 16750-1:2006. Road vehicles. Environmental conditions and testing for electrical and electronic equipmentGeneral
BS ISO 16750-2:2006. Road vehicles. Environmental conditions and testing for electrical & electronic equipmentElectrical loads
BS ISO 16750-2:2010. Road vehicles. Environmental conditions and testing for electrical and electronic equipmentElectrical loads
BS ISO 16750-2:2012. Road vehicles. Environmental conditions and testing for electrical and electronic equipmentElectrical loads
BS ISO 16750-3:2007. Road vehicles. Environmental conditions and testing for electrical and electronic equipmentMechanical loads
BS ISO 16750-3:2012. Road vehicles. Environmental conditions and testing for electrical and electronic equipmentMechanical loads
BS ISO 16750-4:2006. Road vehicles. Environmental conditions and testing for electrical & electronic equipmentClimatic loads
BS ISO 16750-4:2010. Road vehicles. Environmental conditions and testing for electrical and electronic equipmentClimatic loads
BS ISO 16750-5:2010. Road vehicles. Environmental conditions and testing for electrical and electronic equipmentChemical loads
BS ISO 16754:2008. Earth-moving machinery. Determination of average ground contact pressure for crawler machines
BS ISO 16759:2013. Graphic technology. Quantification and communication for calculating the carbon footprint of print media products
BS ISO 16770:2004. Plastics. Determination of environmental stress cracking (ESC) of polyethylene. Full-notch creep test (FNCT)
BS ISO 16772:2004. Soil quality. Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry
BS ISO 16790:2005. Plastics. Determination of drawing characteristics of thermoplastics in the molten state
BS ISO 16792:2006. Technical product documentation. Digital product definition data practices
BS ISO 16814:2008. Building environment design. Indoor air quality. Methods of expressing the quality of indoor air for human occupancy
BS ISO 16817:2012. Building environment design. Indoor environment. Design process for visual environment
BS ISO 16818:2008. Building environment design. Energy efficiency. Terminology
BS ISO 16820:2004. Sensory analysis. Methodology. Sequential analysis
BS ISO 16832:2006. Acoustics. Loudness scaling by means of categories
BS ISO 16833:2006. Road vehicles. Wheels. Measurement of radial and lateral run-out
BS ISO 16839:2013. Steel wire ropes. Determination of the transverse rigidity of steel wire ropes under no axial load condition
BS ISO 16840-2:2007. Wheelchair seatingDetermination of physical and mechanical characteristics of devices intended to manage tissue integrity. Seat cushions
BS ISO 16844-1:2013. Road vehicles. Tachograph systemsElectrical connectors
BS ISO 16844-2:2011. Road vehicles. Tachograph systemsElectrical interface with recording unit
BS ISO 16850:2007+A1:2013. Road vehicles. Pedestrian protection. Child head impact test method
BS ISO 16853:2010. Textile machinery. Sliver cans, rectangular. Main dimensions and tolerances
BS ISO 16860:2005. Hydraulic fluid power. Filters. Test method for differential pressure devices
BS ISO 16869:2001. Plastics. Assessment of the effectiveness of fungistatic compounds in plastics formulations
BS ISO 16869:2008. Plastics. Assessment of the effectiveness of fungistatic compounds in plastics formulations
BS ISO 16872:2008. Short link chains for lifting purposes. Grade VH, fine tolerance for manually operated chain hoists
BS ISO 16873:2002. Hydraulic fluid power. Pressure switches. Mounting surfaces
BS ISO 16873:2011. Hydraulic fluid power. Pressure switches. Mounting surfaces
BS ISO 16874:2004. Hydraulic fluid power. Identification of manifold assemblies and their components
BS ISO 16877:2008. Short link chains for lifting purposes. Grade TH, fine tolerance for manually operated chain hoists
BS ISO 16881-1:2005. Cranes. Design calculation for rail wheels and associated trolley track supporting structureGeneral
BS ISO 16883:2007. Packaging. Transport packages for dangerous goods. Test methods for large packagings
BS ISO 16889:1999. Hydraulic fluid power filters. Multi-pass method for evaluating filtration performance of a filter element
BS ISO 16889:2008. Hydraulic fluid power. Filters. Multi-pass method for evaluating filtration performance of a filter element
BS ISO 16900-3:2012. Respiratory protective devices. Methods of test and test equipmentDetermination of particle filter penetration
BS ISO 16900-4:2011. Respiratory protective devices. Methods of test and test equipmentDetermination of gas filter capacity and migration, desorption and carbon monoxide dynamic testing
BS ISO 16902-1:2003. Hydraulic fluid power. Test code for the determination of sound power levels using sound intensity techniques. Engineering methodPumps
BS ISO 16915:2003. Tools for moulding. Sprue pullers
BS ISO 16916:2004. Tools for moulding. Tool specification sheet for injection moulds
BS ISO 16929:2002. Plastics. Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
BS ISO 16929:2013. Plastics. Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
BS ISO 16938-1:2008. Building construction. Determination of the staining of porous substrates by sealants used in jointsTest with compression
BS ISO 16938-2:2008. Building construction. Determination of the staining of porous substrates by sealants used in jointsTest without compression
BS ISO 16962:2005. Surface chemical analysis. Analysis of zinc- and/or aluminium-basedmetal lic coatings by glow-discharge optical-emission spectrometry
BS ISO 16992:2006. Passenger car tyres. Spare unit substitutive equipment (SUSE)
BS ISO 16992:2010. Passenger car tyres. Spare unit substitutive equipment (SUSE)
BS ISO 1700:1988. Cinematography. 8 mm type S motion-picture raw stock film. Cutting and perforating dimensions
BS ISO 1704:2008. Ships and marine technology. Stud-link anchor chains
BS ISO 17049:2013. Accessible design. Application of braille on signage, equipment and appliances
BS ISO 17053:2005. Steel and iron. Determination of oxygen. Infrared method after fusion under inert gas
BS ISO 17058:2004. Steel and iron. Determination of arsenic content. Spectrophotometric method
BS ISO 17066:2007. Hydraulic tools. Vocabulary
BS ISO 17080:2005. Manually portable agricultural and forestry machines and powered lawn and garden equipment. Design principles for single-panel product safety labels
BS ISO 17082:2004. Pneumatic fluid power. Valves. Data to be included in supplier literature
BS ISO 17087:2006. Specifications for adhesives used for finger joints in non-structural lumber products
BS ISO 17089-1:2010. Measurement of fluid flow in closed conduits. Ultrasonic meters for gasMeters for custody transfer and allocation measurement
BS ISO 17090-1:2008. Health informatics. Public key infrastructureOverview of digital certificate services
BS ISO 17090-1:2013. Health informatics. Public key infrastructureOverview of digital certificate services
BS ISO 17090-2:2008. Health informatics. Public key infrastructureCertificate profile
BS ISO 17090-3:2008. Health informatics. Public key infrastructurePolicy management of certification authority
BS ISO 17091:2013. Workplace air. Determination of lithium hydroxide, sodium hydroxide, potassium hydroxide and calcium dihydroxide. Method by measurement of corresponding cations by suppressed ion chromatography
BS ISO 17095:2013. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for interfacial bond strength of ceramic materials at elevated temperatures
BS ISO 17098:2013. Packaging material recycling. Report on substances and materials which may impede recycling
BS ISO 17101-1:2012. Agricultural machinery. Thrown-object test and acceptance criteriaRotary mowers
BS ISO 17101-2:2012. Agricultural machinery. Thrown-object test and acceptance criteriaFlail mowers
BS ISO 17103:2009. Agricultural machinery. Rotary disc mowers, rotary drum mowers and flail mowers. Test methods and acceptance criteria for protective skirts
BS ISO 17107:2011. Space data and information transfer systems. XML specification for navigation data messages
BS ISO 17115:2007. Health informatics. Vocabulary for terminological systems
BS ISO 17126:2005. Soil quality. Determination of the effects of pollutants on soil flora. Screening test for emergence of lettuce seedlings (Lactuca sativa L.)
BS ISO 17129:2006. Milk and milk products. Determination of soy and pea proteins using capillary electrophoresis in the presence of sodium dodecyl sulfate (SDS-CE). Screening method
BS ISO 17155:2002. Soil quality. Determination of abundance and activity of soil microflora using respiration curves
BS ISO 17155:2012. Soil quality. Determination of abundance and activity of soil microflora using respiration curves
BS ISO 17165-1:2007. Hydraulic fluid power. Hose assembliesDimensions and requirements
BS ISO 17166:1999. Erythema reference action spectrum and standard erythema dose
BS ISO 17178:2013. Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements
BS ISO 17194:2007. Structural adhesives. A standard database of properties
BS ISO 17202:2002. Textiles. Determination of twist in single spun yarns. Untwist/retwist method
BS ISO 17214:2011. Space data and information transfer systems. Spacecraft onboard interface services. Time access service
BS ISO 17228:2005. Leather. Tests for colour fastness. Change in colour with accelerated ageing
BS ISO 17239:2004. Fruits, vegetables and derived products. Determination of arsenic content. Method using hydride generation atomic absorption spectrometry
BS ISO 17240:2004. Fruit and vegetable products. Determination of tin content. Method using flame atomic absorption spectrometry
BS ISO 17246:2005. Coal. Proximate analysis
BS ISO 17246:2010. Coal. Proximate analysis
BS ISO 17247:2005. Coal. Ultimate analysis
BS ISO 17247:2013. Coal. Ultimate analysis
BS ISO 1726-2:2007. Road vehicles. Mechanical couplings between tractors and semi-trailersInterchangeability between low-coupling tractors and high-volume semi-trailers
BS ISO 1726-3:2010. Road vehicles. Mechanical couplings between tractors and semi-trailersRequirements for semi-trailer contact area to fifth wheel
BS ISO 17266:2002. Cinematography. Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives. Position and width dimensions
BS ISO 17267:2009. Intelligent transport systems. Navigation systems. Application programming interface (API)
BS ISO 17268:2006. Compressed hydrogen surface vehicle refuelling connection devices
BS ISO 17268:2012. Gaseous hydrogen land vehicle refuelling connection devices
BS ISO 17278:2013. Rubber, raw natural. Determination of the gel content of technically specified rubber (TSR)
BS ISO 1728:2006. Road vehicles. Pneumatic braking connections between motor vehicles and towed vehicles. Interchangeability
BS ISO 17282:2004
BS ISO 17282:2004 (COVERS). Plastics. Guide to the acquisition and presentation of design data
BS ISO 17282:2004. Plastics. Guide to the acquisition and presentation of design data
BS ISO 17282:2004. Plastics. Guide to the acquisition and presentation of design data
BS ISO 17288-1:2002. Passenger cars. Free-steer behaviourSteering-release open-loop test method
BS ISO 17288-1:2011. Passenger cars. Free-steer behaviourSteering-release open-loop test method
BS ISO 17288-2:2004. Passenger cars. Free-steer behaviourSteering-pulse open-loop test method
BS ISO 17288-2:2011. Passenger cars. Free-steer behaviourSteering-pulse open-loop test method
BS ISO 17313:2004. Soil quality. Determination of hydraulic conductivity of saturated porous materials using a flexible wall permeameter
BS ISO 17314:2008. Manually portable forest machinery. Recyclability and recoverability. Calculation method
BS ISO 17321-1:2006. Graphic technology and photography. Colour characterization of digital still cameras (DSCs)Stimuli, metrology, and test procedures
BS ISO 17321-1:2012. Graphic technology and photography. Colour characterisation of digital still cameras (DSCs)Stimuli, metrology and test procedures
BS ISO 17331:2004+A1:2010. Surface chemical analysis. Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy
BS ISO 17332:2001. Cinematography. Manufacturer printed latent image identification information for 35mm motion-picture colour-print film. Specifications
BS ISO 17334:2008. Metallic and other inorganic coatings. Autocatalytic nickel over autocatalytic copper for electromagnetic shielding
BS ISO 17338:2009. Ships and marine technology. Drawings for fire protection. Indications of fire rating by divisions for ships and high-speed craft
BS ISO 17339:2002. Ships and marine technology. Sea anchors for survival craft and rescue boats
BS ISO 17352:2008. Hardmetals. Determination of silicon in cobalt metal powders using graphite-furnace atomic absorption
BS ISO 17355:2003. Space data and information transfer systems. CCSDS file delivery protocol
BS ISO 17355:2004. Space data and information transfer systems. CCSDS file delivery protocol
BS ISO 17355:2007. Space data and information transfer systems. CCSDS file delivery protocol
BS ISO 17356-2:2005. Road vehicles. Open interface for embedded automotive applicationsOSEK/VDX specifications for binding OS, COM and NM
BS ISO 17356-3:2005. Road vehicles. Open interface for embedded automotive applicationsOSEK/VDX operating system (OS)
BS ISO 17356-4:2005. Road vehicles. Open interface for embedded automotive applicationsOSEK/VDX Communication (COM)
BS ISO 17356-5:2006. Road vehicles. Open interface for embedded automotive applicationsOSEK/VDX Network Management (NM)
BS ISO 17356-6:2006. Road vehicles. Open interface for embedded automotive applicationsOSEK/VDX implementation language (OIL)
BS ISO 17357:2002. Ships and marine technology. High-pressure floating pneumatic rubber fenders
BS ISO 17359:2003. Condition monitoring and diagnostics of machines. General guidelines
BS ISO 17359:2011. Condition monitoring and diagnostics of machines. General guidelines
BS ISO 17361:2007. Intelligent transport systems. Lane departure warning systems. Performance requirements and test procedures
BS ISO 17363:2007. Supply chain applications of RFID. Freight containers
BS ISO 17363:2013. Supply chain applications of RFID. Freight containers
BS ISO 17364:2009. Supply chain applications of RFID. Returnable transport items (RTIs)
BS ISO 17364:2013. Supply chain applications of RFID. Returnable transport items (RTIs) and returnable packaging items (RPIs)
BS ISO 17365:2009. Supply chain applications of RFID. Transport units
BS ISO 17365:2013. Supply chain applications of RFID. Transport units
BS ISO 17366:2013. Supply chain applications of RFID. Product packaging
BS ISO 17367:2013. Supply chain applications of RFID. Product tagging
BS ISO 17369:2013. Statistical data and metadata exchange (SDMX)
BS ISO 17372:2008+A1:2013. Animal feeding stuffs. Determination of zearalenone by immunoaffinity column chromatography and high performance liquid chromatography
BS ISO 17373:2005. Road vehicles. Sled test procedure for evaluating occupant head and neck interactions with seat/head restraint designs in low-speed rear-end impact
BS ISO 1738:2004. Butter. Determination of salt content
BS ISO 17380:2004. Soil quality. Determination of total cyanide and easily released cyanide. Continuous-flow analysis method
BS ISO 17381:2003, BS 6068-2.88:2003. Water quality. Selection and application of ready-to-use test kit methods in water analysis
BS ISO 17382:2007. Oil of magnolia flower, China type (Michelia x alba DC)
BS ISO 17386:2004. Transport information and control systems. Manoeuvring aids for low speed operation (MALSO). Performance requirements and test procedures
BS ISO 17386:2010. Transport information and control systems. Manoeuvring aids for low speed operation (MALSO). Performance requirements and test procedures
BS ISO 17387:2008. Intelligent transport systems. Lane change decision aid systems (LCDAS). Performance requirements and test procedures
BS ISO 1739:2006. Butter. Determination of the refractive index of the fat (reference method)
BS ISO 17398:2004. Safety colours and safety signs. Classification, performance and durability of safety signs
BS ISO 17399:2003. Space systems. Man-systems integration
BS ISO 1740:2004. Milkfat products and butter. Determination of fat acidity (reference method)
BS ISO 17410:2001. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of psychrotrophic micro-organisms
BS ISO 17412:2007. Oil of bitter fennel (Foeniculum vulgare Mill. ssp. vulgare var. vulgare)
BS ISO 17422:2002. Plastics. Environmental aspects. General guidelines for their inclusion in standards
BS ISO 17432:2004. Health informatics. Messages and communication. Web access to DICOM persistent objects
BS ISO 17433:2003. Space data and information transfer systems. Packet telemetry services
BS ISO 17442:2012. Financial services. Legal Entity Identifier (LEI)
BS ISO 17455:2005. Plastics piping systems. Multilayer pipes. Determination of the oxygen permeability of the barrier pipe
BS ISO 17458-1:2013. Road vehicles. FlexRay communications systemGeneral information and use case definition
BS ISO 17458-2:2013. Road vehicles. FlexRay communications systemData link layer specification
BS ISO 17458-3:2013. Road vehicles. FlexRay communications systemData link layer conformance test specification
BS ISO 17458-4:2013. Road vehicles. FlexRay communications systemElectrical physical layer specification
BS ISO 17458-5:2013. Road vehicles. FlexRay communications systemElectrical physical layer conformance test specification
BS ISO 17467-1:2012. Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cementGeneral
BS ISO 17467-2:2012. Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cementPipes
BS ISO 17467-3:2012. Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cementFittings
BS ISO 17470:2004. Microbeam analysis. Electron probe microanalysis. Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
BS ISO 17474:2012. Corrosion of metals and alloys. Conventions applicable to electrochemical measurements in corrosion testing
BS ISO 17479:2013. Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
BS ISO 17484-1:2006. Plastics piping systems. Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa)Specifications for systems
BS ISO 17485:2006. Bevel gears. ISO system of accuracy
BS ISO 17491-1:2012. Protective clothing. Test methods for clothing providing protection against chemicalsDetermination of resistance to outward leakage of gases (internal pressure test)
BS ISO 17491-2:2012. Protective clothing. Test methods for clothing providing protection against chemicalsDetermination of resistance to inward leakage of aerosols and gases (inward leakage test)
BS ISO 17493:2000. Clothing and equipment for protection against heat. Test method for convective heat resistance using a hot air circulating oven
BS ISO 17497-1:2004. Acoustics. Sound scattering properties of surfacesMeasurement of the random-incidence scattering coefficient in a reverberation room
BS ISO 17497-2:2012. Acoustics. Sound-scattering properties of surfacesMeasurement of the directional diffusion coefficient in a free field
BS ISO 17499:2006. Carbonaceous materials used in the production of aluminium. Determination of baking level expressed by equivalent temperature
BS ISO 17500:2006. Aluminium oxide used for the production of primary aluminium. Determination of attrition index
BS ISO 1751:2012. Ships and marine technology. Ships’ side scuttles
BS ISO 17514:2004. Time-measuring instruments. Photoluminescent deposits. Test methods and requirements
BS ISO 17531:2002. Photography. Processing chemicals. Specifications for 4-(N-ethyl-N-2- methanesulfonylaminoethyl)-2-methylphenylenediamine sesquisulfate monohydrate
BS ISO 17532:2007. Stationary equipment for agriculture. Data communications network for livestock farming
BS ISO 1754:1998. Photography. Cameras using 35 mm film and roll film. Picture sizes
BS ISO 1754:2010. Photography. Cameras using 35 mm film and roll film. Dimensions of picture sizes
BS ISO 17544:2004. Carbonaceous materials used in the production of aluminium. Cold and tepid ramming pastes. Determination of rammability of unbaked pastes
BS ISO 17554:2005. Reaction to fire tests. Mass loss measurement
BS ISO 17555:2003. Plastics. Film and sheeting. Biaxially oriented polypropylene (PP) films
BS ISO 17557:2003. Plastics. Film and sheeting. Cast polypropylene (PP) films
BS ISO 17559:2003. Hydraulic fluid power. Electrically controlled hydraulic pumps. Test methods to determine performance characteristics
BS ISO 17560:2002. Surface chemical analysis. Secondary-ion mass spectrometry. Method for depth profiling of boron in silicon
BS ISO 17564:2001. Nitrile rubber. Determination of residual unsaturation in hydrogenated nitrile rubber (HNBR) by iodine value
BS ISO 17564:2008. Raw hydrogenated nitrile rubber (HNBR). Determination of residual unsaturation by iodine value
BS ISO 17566:2011. Space systems. General test documentation
BS ISO 17567:2005. Agriculture and forestry tractors and implements. Hydraulic power beyond
BS ISO 17572-1:2008. Intelligent transport systems (ITS). Location referencing for geographic databasesGeneral requirements and conceptual model
BS ISO 17572-2:2008. Intelligent transport systems (ITS). Location referencing for geographic databasesPre-coded location references (pre-coded profile)
BS ISO 17572-3:2008. Intelligent transport systems (ITS). Location referencing for geographic databasesDynamic location references (dynamic profile)
BS ISO 17573:2010. Electronic fee collection. Systems architecture for vehicle-related tolling
BS ISO 17577:2006. Steel. Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm
BS ISO 17584:2005. Refrigerant properties
BS ISO 17591:2002. Machinery for forestry. Knuckleboom log loaders. Identification, terminology, classification and component nomenclature
BS ISO 17593:2007. Clinical laboratory testing and in vitro medical devices. Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy
BS ISO 17604:2003+A1:2009. Microbiology of food and animal feeding stuffs. Carcass sampling for microbiological analysis
BS ISO 17612:2004. Tractors and machinery for agriculture and forestry. Auxiliary-power-transmission connector for the operator station
BS ISO 17613-1:2006. Manually operated pumps for drinking water. Selection and acceptanceSoutheast Asia
BS ISO 17615:2007. Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications
BS ISO 17616:2008. Soil quality. Guidance on the choice and evaluation of bioassays for ecotoxicological characterization of soils and soil materials
BS ISO 1762:2001. Paper, board and pulps. Determination of residue (ash) on ignition at 525°C
BS ISO 17631:2002 (Covers).
BS ISO 17631:2002+A1:2011. Ships and marine technology. Shipboard plans for fire protection, life-saving appliances and means of escape
BS ISO 1766:1999. Textile floor coverings. Determination of thickness of pile above the substrate
BS ISO 17682:2013. Ships and marine technology. Methodology for ship launching utilizing air bags
BS ISO 17687:2007. Transport information and control systems (TICS). General fleet management and commercial freight operations. Data dictionary and message sets for electronic identification and monitoring of hazardous materials/dangerous goods transportation.
BS ISO 17710:2002. Plastics. Polyols for use in the production of polyurethane. Determination of degree of unsaturation by microtitration
BS ISO 17712:2010. Freight containers. Mechanical seals
BS ISO 17712:2013. Freight containers. Mechanical seals
BS ISO 17713-1:2007. Meteorology. Wind measurementsWind tunnel test methods for rotating anemometer performance
BS ISO 17714:2007. Meteorology. Air temperature measurements. Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
BS ISO 17715:2013. Flour from wheat (Tritticum aestivum L.). Amperometric method for starch damage measurement
BS ISO 17718:2013. Wholemeal and flour from wheat (Triticum aestivum L.). Determination of rheological behaviour as a function of mixing and temperature increase
BS ISO 17724:2003. Graphical symbols. Vocabulary
BS ISO 17727:2012. Cork. Cork stoppers for still wine. Sampling plan for the quality control of cork stoppers
BS ISO 17733:2004. Workplace air. Determination of mercury and inorganic mercury compounds. Method by cold vapour atomic absorption spectrometry or atomic fluorescence spectrometry
BS ISO 17734-1:2006. Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometryIsocyanates using dibutylamine derivatives
BS ISO 17734-2:2006. Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometryAmines and aminoisocyanates using dibutylamine and ethyl chloroformate derivatives
BS ISO 17735:2009. Workplace atmospheres. Determination of total isocyanate groups in air using 1-(9-anthracenylmethyl)piperazine (MAP) reagent and liquid chromatography
BS ISO 17736:2010. Workplace air quality. Determination of isocyanate in air using a double-filter sampling device and analysis by high pressure liquid chromatography
BS ISO 17744:2004. Plastics. Determination of specific volume as a function of temperature and pressure (pVT diagram). Piston apparatus method
BS ISO 17751:2007. Textiles. Quantitative analysis of animal fibres by microscopy. Cashmere, wool, speciality fibres and their blends
BS ISO 17752:2012. Corrosion of metals and alloys. Procedures to determine runoff rates of metals from materials as a result of atmospheric corrosion
BS ISO 17771:2003. Plastics. Thermoset moulding compounds. Determination of the degree of fibre wetting in SMC
BS ISO 17775:2006. Aircraft. Ground-service connections. Potable water, toilet-flush water and toilet drain
BS ISO 17792:2006. Milk, milk products and mesophilic starter cultures. Enumeration of citrate-fermenting lactic acid bacteria. Colony-count technique at 25°C
BS ISO 17804:2005. Founding. Ausferritic spheroidal graphite ausferrite cast iron. Classification
BS ISO 17807:2013. Space data and information transfer systems. Asynchronous message service
BS ISO 1781:1983. Cinematography. Projector usage of 8 mm type S motion-picture film for direct front projection
BS ISO 17812:2007. Paper, board and pulps. Determination of total magnesium, total calcium, total manganese, total iron and total copper
BS ISO 17824:2009. Petroleum and natural gas industries. Downhole equipment. Sand screens
BS ISO 17832:2009. Non-parallel steel wire and cords for tyre reinforcement
BS ISO 1785:1983. Cinematography. Printed 8 mm, Type S, image area on 16 mm motion-picture film perforated 8 mm, Type S (1-4). Position and dimensions
BS ISO 17853:2003. Wear of implant materials. Polymer and metal wear particles. Isolation, characterization and quantification
BS ISO 17853:2010. Wear of implant materials. Polymer and metal wear particles. Isolation and characterization
BS ISO 17853:2011. Wear of implant materials. Polymer and metal wear particles. Isolation and characterization
BS ISO 17854:2013. Space data and information transfer systems. Flexible advanced coding and modulation scheme for high rate telemetry applications
BS ISO 17858:2007. Water quality. Determination of dioxin-like polychlorinated Biphenyls. Method using gas-chromatography/mass spectrometry
BS ISO 1787:1984. Cinematography. Camera usage of 8 mm Type S motion-picture film. Specifications
BS ISO 17874-1:2010. Remote handling devices for radioactive materialsGeneral requirements
BS ISO 17884:2004. Ships and marine technology. Navigation. Searchlights for high-speed craft
BS ISO 17894:2005. Ships and marine technology. Computer applications. General principles for the development and use of programmable electronic systems in marine applications
BS ISO 17899:2004. Ships and marine technology. Marine electric window wipers
BS ISO 17900:2002. Agricultural trailers. Balanced and semi-mounted trailers. Determination of payload, vertical static load and axle load
BS ISO 1793:2005. Cinematography. Reels for 16 mm motion-picture projectors (up to and including 610 m capacity: 38 cm size). Dimensions
BS ISO 17949:2013. Impact test procedures for road vehicles. Seating and positioning procedures for anthropomorphic test devices. Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating positions
BS ISO 1795:2000. Rubber, raw natural and raw synthetic. Sampling and further preparative procedures
BS ISO 1795:2007. Rubber, raw natural and raw synthetic. Sampling and further preparative procedures
BS ISO 17973:2002. Surface chemical analysis. Medium-resolution Auger electron spectrometers. Calibration of energy scales for elemental analysis
BS ISO 17974:2002. Surface chemical analysis. High-resolution Auger electron spectrometers. Calibration of energy scales for elemental and chemical-state analysis
BS ISO 17992:2013. Iron ores. Determination of arsenic content. Hydride generation atomic absorption spectrometric method
BS ISO 17997-1:2004. Milk. Determination of casein-nitrogen contentIndirect method (Reference method)
BS ISO 17997-2:2004. Milk. Determination of casein-nitrogen contentDirect method
BS ISO 1803:1997. Building construction. Tolerances. Expression of dimensional accuracy. Principles and terminology
BS ISO 18054:2004. Oils of orris rhizome (Iris pallida Lam. or Iris germanica L.). Determination of irone content. Method using gas chromatography on a capillary column
BS ISO 18055-1:2004. Photography and imaging. Inkjet media. Classification, nomenclature and dimensionsPhoto-grade media (paper and film)
BS ISO 18073:2004, BS 6068-2.90:2004. Water quality. Determination of tetra- to octa-chlorinated dioxins and furans. Method using isotope dilution HRGC/HRMS
BS ISO 18084:2005. Press tools for tablets. Punches and dies
BS ISO 18084:2011. Press tools for tablets. Punches and dies
BS ISO 18096:2013. Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature for preformed pipe insulation
BS ISO 18097:2013. Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature
BS ISO 18098:2013. Thermal insulating products for building equipment and industrial installations. Determination of the apparent density of preformed pipe insulation
BS ISO 18099:2013. Thermal insulating products for building equipment and industrial installations. Determination of the coefficient of thermal expansion
BS ISO 18114:2003. Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative sensitivity factors from ion-implanted reference materials
BS ISO 18115:2001+A2:2007. Surface chemical analysis. Vocabulary
BS ISO 18115-1:2010. Surface chemical analysis. VocabularyGeneral terms and terms used in spectroscopy
BS ISO 18115-2:2010. Surface chemical analysis. VocabularyTerms used in scanning-probe microscopy
BS ISO 18116:2005. Surface chemical analysis. Guidelines for preparation and mounting of specimens for analysis
BS ISO 18117:2009. Surface chemical analysis. Handling of specimens prior to analysis
BS ISO 18118:2004. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
BS ISO 18132-1:2006. Refrigerated light hydrocarbon fluids. General requirements for automatic level gaugesGauges onboard ships carrying liquefied gases
BS ISO 18132-1:2011. Refrigerated hydrocarbon and nonpetroleum based liquefied gaseous fuels. General requirements for automatic tank gaugesAutomatic tank gauges for liquefied natural gas on board marine carriers and floating storage
BS ISO 18132-2:2008. Refrigerated light hydrocarbon fluids. General requirements for automatic level gaugesGauges in refrigerated-type shore tanks
BS ISO 18132-3:2011. Refrigerated hydrocarbon and nonpetroleum based liquefied gaseous fuels. General requirements for automatic tank gaugesAutomatic tank gauges for liquefied petroleum and chemical gases on board marine carriers and floating storage
BS ISO 18144:2003. Environmental tobacco smoke. Estimation of its contribution to respirable suspended particles. Method based on solanesol
BS ISO 18145:2003. Environmental tobacco smoke. Determination of vapour phase nicotine and 3-ethenylpyridine in air. Gas chromatographic method
BS ISO 18164:2005. Passenger car, truck, bus and motorcycle tyres. Methods of measuring rolling resistance
BS ISO 18165:2001. Petroleum and natural gas industries. Performance testing of cementing float equipment
BS ISO 1817:1999, BS 903-A16:1999. Rubber, vulcanized. Determination of the effect of liquids
BS ISO 1817:2005. Rubber, vulcanized. Determination of the effect of liquids
BS ISO 1817:2011. Rubber, vulcanized or thermoplastic. Determination of the effect of liquids
BS ISO 18172-1:2007. Gas cylinders. Refillable welded stainless steel cylindersTest pressure 6 MPa and below
BS ISO 18172-2:2007. Gas cylinders. Refillable welded stainless steel cylindersTest pressure greater than 6 MPa
BS ISO 18185-1:2007. Freight containers. Electronic sealsCommunication protocol
BS ISO 18185-2:2007. Freight containers. Electronic sealsApplication requirements
BS ISO 18185-3:2006. Freight containers. Electronic sealsEnvironmental characteristics
BS ISO 18185-4:2007. Freight containers. Electronic sealsData protection
BS ISO 18185-5:2007. Freight containers. Electronic sealsPhysical layer
BS ISO 18186:2011. Freight containers. RFID cargo shipment tag system
BS ISO 18192-1:2008. Implants for surgery. Wear of total intervertebral spinal disc prosthesesLoading and displacement parameters for wear testing and corresponding environmental conditions for test
BS ISO 18192-1:2011. Implants for surgery. Wear of total intervertebral spinal disc prosthesesLoading and displacement parameters for wear testing and corresponding environmental conditions for test
BS ISO 18192-2:2010. Implants for surgery. Wear of total intervertebral spinal disc prosthesesNucleus replacements
BS ISO 18201:2013. Space data and information transfer systems. Mission operations reference model
BS ISO 18202:2013. Space data and information transfer systems. Mission operations message abstraction layer
BS ISO 18207:2006. Road vehicles. Trailers up to 3,5 t. Control of welded towing brackets for coupling ball after fatigue testing
BS ISO 18225:2007. Plastics piping systems. Multilayer piping systems for outdoor gas installations. Specifications for systems
BS ISO 18225:2012. Plastics piping systems. Multilayer piping systems for outdoor gas installations. Specifications for systems
BS ISO 18232:2006. Health informatics. Messages and communication. Format of length limited globally unique string identifiers
BS ISO 18252:2006. Anhydrous milk fat. Determination of sterol composition by gas liquid chromatography (Routine method)
BS ISO 1827:2007. Rubber, vulcanized or thermoplastic. Determination of shear modulus and adhesion to rigid plates. Quadruple-shear methods
BS ISO 1827:2011. Rubber, vulcanized or thermoplastic. Determination of shear modulus and adhesion to rigid plates. Quadruple-shear methods
BS ISO 18280:2005. Plastics. Epoxy resins. Test methods
BS ISO 18280:2010. Plastics. Epoxy resins. Test methods
BS ISO 18283:2006. Hard coal and coke. Manual sampling
BS ISO 18292:2011. Energy performance of fenestration systems for residential buildings. Calculation procedure
BS ISO 1830:2005. Paper, board and pulps. Determination of acid-soluble manganese
BS ISO 18308:2011. Health informatics. Requirements for an electronic health record architecture
BS ISO 18312-1:2012. Mechanical vibration and shock. Measurement of vibration power flow from machines into connected support structuresDirect method
BS ISO 18312-2:2012. Mechanical vibration and shock. Measurement of vibration power flow from machines into connected support structuresIndirect method
BS ISO 1832:2004. Indexable inserts for cutting tools. Designation
BS ISO 1832:2012. Indexable inserts for cutting tools. Designation
BS ISO 18329:2004. Milk and milk products. Determination of furosine content. Ion-pair reverse-phase high-performance liquid chromatography method
BS ISO 18332:2007. Metallic and other inorganic coatings. Definitions and conventions concerning porosity
BS ISO 18333:2002. Pallets for materials handling. Quality of new wooden components for flat pallets
BS ISO 18334:2003. Pallets for materials handling. Quality of assembly of new, wooden, flat pallets
BS ISO 18334:2010. Pallets for materials handling. Quality of assembly of new wooden pallets
BS ISO 1834:1999. Short link chain for lifting purposes. General conditions of acceptance
BS ISO 18352:2009. Carbon-fibre-reinforced plastics. Determination of compression-after-impact properties at a specified impact-energy level
BS ISO 1837:2003. Lifting hooks. Nomenclature
BS ISO 18373-1:2007. Rigid PVC pipes. Differential scanning calorimetry (DSC) methodMeasurement of the processing temperature
BS ISO 18373-2:2008. Rigid PVC pipes. Differential scanning calorimetry (DSC) methodMeasurement of the enthalpy of fusion of crystallites
BS ISO 18381:2013. Space data and information transfer systems. Lossless multispectral and hyperspectral image compression
BS ISO 18382:2013. Space data and information transfer systems. Spacecraft onboard interface services. RFID-based inventory management systems
BS ISO 18413:2002. Hydraulic fluid power. Cleanliness of parts and components. Inspection document and principles related to contaminant collection, analysis and data reporting
BS ISO 18421:2013. Ships and marine technology. Inland navigation vessels. Lifebuoy housings
BS ISO 18423:2013. Space data and information transfer systems. Pseudo-Noise (PN) Ranging Systems
BS ISO 18424:2013. Space data and information transfer systems. XML Telemetric and Command Exchange (XTCE)
BS ISO 18425:2013. Space data and information transfer systems. Spacecraft Onboard Interface Services. Subnetwork Packet Service
BS ISO 18426:2013. Space data and information transfer systems. Spacecraft Onboard Interface Services. Subnetwork Memory Access Service
BS ISO 18427:2013. Space data and information transfer systems. Spacecraft Onboard Interface Services. Subnetwork Synchronization Service
BS ISO 18428:2013. Space data and information transfer systems. Spacecraft Onboard Interface Services. Subnetwork Device Discovery Service
BS ISO 18431-1:2005. Mechanical vibration and shock. Signal processingGeneral introduction
BS ISO 18431-2:2004. Mechanical vibration and shock. Signal processingTime domain windows for Fourier Transform analysis
BS ISO 18431-4:2007. Mechanical vibration and shock. Signal processingShock-response spectrum analysis
BS ISO 18434-1:2008. Condition monitoring and diagnostics of machines. ThermographyGeneral procedures
BS ISO 18435-2:2012. Industrial automation systems and integration. Diagnostics, capability assessment and maintenance applications integrationDescriptions and definitions of application domain matrix elements
BS ISO 18436-1:2004. Condition monitoring and diagnostics of machines. Requirements for training and certification of personnelGeneral requirements for certifying bodies and the certification process
BS ISO 18436-1:2012. Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnelRequirements for assessment bodies and the assessment process
BS ISO 18436-2:2003. Condition monitoring and diagnostics of machines. Requirements for training and certification of personnelVibration condition monitoring and diagnostics
BS ISO 18436-3:2008+A1:2009. Condition monitoring and diagnostics of machines. Requirements for training and certification of personnelRequirements for training bodies and the training process
BS ISO 18436-3:2012. Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnelRequirements for training bodies and the training process
BS ISO 18436-4:2008. Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnelField lubricant analysis
BS ISO 18436-5:2012. Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnelLubricant laboratory technician/analyst
BS ISO 18436-6:2008. Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnelAcoustic emission
BS ISO 18436-7:2008. Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnelThermography
BS ISO 18436-8:2013. Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnelUltrasound
BS ISO 18437-1:2012. Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materialsPrinciples and guidelines
BS ISO 18437-2:2005+A1:2010. Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materialsResonance method
BS ISO 18437-3:2005+A1:2010. Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materialsCantilever shear beam method
BS ISO 18437-4:2008. Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materialsDynamic stiffness method
BS ISO 18437-5:2011. Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materialsPoisson ratio based on comparison between measurements and finite element analysis
BS ISO 18438:2013. Space data and information transfer systems. Spacecraft Onboard Interface Services. Subnetwork Test Service
BS ISO 18439:2013. Space data and information transfer systems. Space Communication Cross Support. Service Management. Service Specification
BS ISO 18440:2013. Space data and information transfer systems. Space Link Extension. Internet Protocol for Transfer Services
BS ISO 18441:2013. Space data and information transfer systems. Space Link Extension. Application Program Interface for Transfer Services. Core Specification
BS ISO 18442:2013. Space data and information transfer systems. Space Link Extension. Application Program Interface for Return All Frames Service
BS ISO 18443:2013. Space data and information transfer systems. Space Link Extension. Application Program Interface for Return Channel Frames Service
BS ISO 18444:2013. Space data and information transfer systems. Space Link Extension. Application Program Interface for Return Operational Control Fields Service
BS ISO 18445:2013. Space data and information transfer systems. Space Link Extension. Application Program Interface for the Forward CLTU Service
BS ISO 18446:2013. Space data and information transfer systems. Space Link Extension. Application Program Interface for the Forward Space Packet Service
BS ISO 18512:2007. Soil quality. Guidance on long and short term storage of soil samples
BS ISO 18515:2007. Carbonaceous materials for the production of aluminium. Cathode blocks and baked anodes. Determination of compressive strength
BS ISO 18516:2006. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Determination of lateral resolution
BS ISO 18517:2005. Rubber, vulcanized or thermoplastic. Hardness testing. Introduction and guide
BS ISO 1853:2011. Conducting and dissipative rubbers, vulcanized or thermoplastic. Measurement of resistivity
BS ISO 18549-1:2009. Metallic powders. Determination of apparent density and flow rate at elevated temperaturesDetermination of apparent density at elevated temperatures
BS ISO 18549-2:2009. Metallic powders. Determination of apparent density and flow rate at elevated temperaturesDetermination of flow rate at elevated temperatures
BS ISO 18553:2002. Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
BS ISO 18573:2003. Conveyor belts. Test atmospheres and conditioning periods
BS ISO 18573:2012. Conveyor belts. Test atmospheres and conditioning periods
BS ISO 18589-1:2005. Measurement of radioactivity in the environment. SoilGeneral guidelines and definitions
BS ISO 18589-2:2007. Measurement of radioactivity in the environment. SoilGuidance for the selection of the sampling strategy, sampling and pre-treatment of samples
BS ISO 18589-3:2007. Measurement of radioactivity in the environment. SoilMeasurement of gamma-emitting radionuclides
BS ISO 18589-4:2009. Measurement of radioactivity in the environment. SoilMeasurement of plutonium isotopes (plutonium 238 and Plutonium 239 + 240) by alpha spectrometry
BS ISO 18589-5:2009. Measurement of radioactivity in the environment. SoilMeasurement of strontium 90
BS ISO 18589-6:2009. Measurement of radioactivity in the environment. SoilMeasurement of gross alpha and gross beta activities
BS ISO 18593:2004. Microbiology of food and animal feeding stuffs. Horizontal methods for sampling techniques from surfaces using contact plates and swabs
BS ISO 18632:2010. Alloyed steel. Determination of manganese. Potentiometric and visual titration method
BS ISO 18649:2004. Mechanical vibration. Evaluation of measurement results from dynamic tests and investigations on bridges
BS ISO 18653:2003. Gears. Evaluation of instruments for the measurement of individual gears
BS ISO 18669-1:2004. Internal combustion engines. Pistons pinsGeneral specifications
BS ISO 18669-1:2013. Internal combustion engines. Piston pinsGeneral specifications
BS ISO 18669-2:2004. Internal combustion engines. Pistons pinsInspection measuring principles
BS ISO 18672-1:2009. Plastics piping systems for non-pressure drainage and sewerage. Polyester resin concrete (PRC)Pipes and fittings with flexible joints
BS ISO 18692:2007. Fibre ropes for offshore stationkeeping. Polyester
BS ISO 18695:2007. Textiles. Determination of resistance to water penetration. Impact penetration test
BS ISO 1871:2009. Food and feed products. General guidelines for determination of nitrogen by Kjeldahl method
BS ISO 18738:2003. Lifts (elevators). Measurement of lift ride quality
BS ISO 18738-1:2012. Measurement of ride qualityLifts (elevators)
BS ISO 18738-2:2012. Measurement of ride qualityEscalators and moving walks
BS ISO 18752:2006. Rubber hoses and hose assemblies. Wire- or textile-reinforced single pressure types for hydraulic applications. Specification
BS ISO 18752:2012. Rubber hoses and hose assemblies. Wire- or textile-reinforced single-pressure types for hydraulic applications. Specification
BS ISO 18770:2005. Ships and marine technology. Machinery space flammable oil systems. Prevention of leakage of flammable oil
BS ISO 18772:2008. Soil quality. Guidance on leaching procedures for subsequent chemical and ecotoxicological testing of soils and soil materials
BS ISO 188:1998, BS 903-A19:1998. Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
BS ISO 188:2007. Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
BS ISO 188:2011. Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
BS ISO 18813:2006. Ships and marine technology. Survival equipment for survival craft and rescue boats
BS ISO 18852:2005. Rubber compounding ingredients. Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
BS ISO 18852:2012. Rubber compounding ingredients. Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
BS ISO 18868:2013. Commercial road vehicles. Coupling equipment between vehicles in multiple vehicle combinations. Strength requirements
BS ISO 1887:1995. Textile glass. Determination of combustible-matter content
BS ISO 18872:2007. Plastics. Determination of tensile properties at high strain rates
BS ISO 18878:2004. Mobile elevating work platforms. Operator (driver) training
BS ISO 18878:2013. Mobile elevating work platforms. Operator (driver) training
BS ISO 1888:1996. Textile glass. Staple fibres or filaments. Determination of average diameter
BS ISO 18894:2006. Coke. Determination of coke reactivity index (CRI) and coke strength after reaction (CSR)
BS ISO 18898:2006. Rubber. Calibration and verification of hardness testers
BS ISO 18898:2012. Rubber. Calibration and verification of hardness testers
BS ISO 18899:2004. Rubber. Guide to the calibration of test equipment
BS ISO 18899:2013. Rubber. Guide to the calibration of test equipment
BS ISO 18901:2002. Imaging materials. Processed silver-gelatin type black-and-white film. Specifications for stability
BS ISO 18901:2010. Imaging materials. Processed silver-gelatin-type black-and-white films. Specifications for stability
BS ISO 18902:2001. Imaging materials. Processed photographic films, plates and papers. Filing enclosures and storage containers
BS ISO 18902:2007. Imaging materials. Processed imaging materials. Albums, framing and storage materials
BS ISO 18902:2013. Imaging materials. Processed imaging materials. Albums, framing and storage materials
BS ISO 18903:2002. Imaging materials. Films and paper. Determination of dimensional change
BS ISO 18904:2000. Imaging materials. Processed films. Method for determining lubrication
BS ISO 18905:2002. Imaging materials. Ammonia-processed diazo photographic film. Specifications for stability
BS ISO 18906:2000. Imaging materials. Photographic films. Specifications for safety film
BS ISO 18907:2000. Imaging materials. Photographic films and papers. Wedge test for brittleness
BS ISO 18907:2013. Imaging materials. Photographic films and papers. Wedge test for brittleness
BS ISO 18908:2000. Imaging materials. Photographic film. Determination of folding endurance
BS ISO 18909:2006. Photography. Processed photographic colour films and paper prints. Methods for measuring image stability
BS ISO 1891:2009. Fasteners. Terminology
BS ISO 18910:2000. Imaging materials. Photographic film and paper. Determination of curl
BS ISO 18911:2000. Photography. Processed safety photographic films. Storage practices
BS ISO 18911:2010. Imaging materials. Processed safety photographic films. Storage practices
BS ISO 18912:2002. Imaging materials. Processed vesicular photographic film. Specifications for stability
BS ISO 18913:2003. Imaging materials. Permanence. Vocabulary
BS ISO 18913:2012. Imaging materials. Permanence. Vocabulary
BS ISO 18914:2002. Imaging materials. Photographic film and papers. Method for determining the resistance of photographic emulsions to wet abrasion
BS ISO 18914:2013. Imaging materials. Photographic film and papers. Method for determining the resistance of photographic emulsions to wet abrasion
BS ISO 18915:2000. Imaging materials. Methods for the evaluation of the effectiveness of chemical conversion of silver images against oxidation
BS ISO 18916:2007. Imaging materials. Processed imaging materials. Photographic activity test for enclosure materials
BS ISO 18917:1999. Photography. Determination of residual thiosulfate and other related chemicals in processed photographic materials. Methods using iodine-amylose, methylene blue and silver sulfide
BS ISO 18918:2000. Imaging materials. Processed photographic plates. Storage practices
BS ISO 18919:1999. Photography. Thermally processed silver microfilm. Specifications for stability
BS ISO 18920:2000. Imaging materials. Processed photographic reflection prints. Storage practices
BS ISO 18920:2011. Imaging materials. Reflection prints. Storage practices
BS ISO 18921:2002. Imaging materials. Compact discs (CD-ROM). Method for estimating the life expectancy based on the effects of temperature and relative humidity
BS ISO 18921:2008. Imaging materials. Compact discs (CD-ROM). Method for estimating the life expectancy based on the effects of temperature and relative humidity
BS ISO 18922:2003. Imaging materials. Processed photographic films. Methods for determining scratch resistance
BS ISO 18923:2000. Imaging materials. Polyester-base magnetic tape. Storage practices
BS ISO 18924:2000. Imaging materials. Test methods for Arrhenius type predictions
BS ISO 18924:2013. Imaging materials. Test method for Arrhenius-type predictions
BS ISO 18925:2002. Imaging materials. Optical disk media. Storage practices
BS ISO 18925:2008. Imaging materials. Optical disc media. Storage practices
BS ISO 18925:2013. Imaging materials. Optical disc media. Storage practices
BS ISO 18926:2006. Imaging materials. Information stored on magneto-optical (MO) discs. Method for estimating the life expectancy based on the effects of temperature and relative humidity
BS ISO 18926:2012. Imaging materials. Information stored on magneto-optical (MO) discs. Method for estimating the life expectancy based on the effects of temperature and relative humidity
BS ISO 18927:2002. Imaging materials. Recordable compact disc systems. Method for estimating the life expectancy based on the effects of temperature and relative humidity
BS ISO 18927:2008. Imaging materials. Recordable compact disc systems. Method for estimating the life expectancy based on the effects of temperature and relative humidity
BS ISO 18927:2013. Imaging materials. Recordable compact disc systems. Method for estimating the life expectancy based on the effects of temperature and relative humidity
BS ISO 18928:2002. Imaging materials. Unprocessed photographic films and papers. Storage practices
BS ISO 18928:2013. Imaging materials. Unprocessed photographic films and papers. Storage practices
BS ISO 18929:2003. Imaging materials. Wet-processed silver-gelatin type black-and-white photographic reflection prints. Specifications for dark storage
BS ISO 18929:2012. Imaging materials. Wet-processed silver-gelatin type black-and-white photographic reflection prints. Specifications for dark storage
BS ISO 18930:2011. Imaging materials. Pictorial colour reflection prints. Methods for evaluating image stability under outdoor conditions
BS ISO 18932:2005. Imaging materials. Adhesive mounting systems. Specifications
BS ISO 18932:2009. Imaging materials. Adhesive mounting systems. Specifications
BS ISO 18933:2006. Imaging materials. Magnetic tape. Care and handling practices for extended usage
BS ISO 18933:2012. Imaging materials. Magnetic tape. Care and handling practices for extended usage
BS ISO 18934:2006. Imaging materials. Multiple media archives. Storage environment
BS ISO 18934:2011. Imaging materials. Multiple media archives. Storage environment
BS ISO 18935:2005. Imaging materials. Colour images on paper prints. Determination of indoor water resistance of printed colour images
BS ISO 18936:2012. Imaging materials. Processed colour photographs. Methods for measuring thermal stability
BS ISO 18938:2008. Imaging materials. Optical discs. Care and handling for extended storage
BS ISO 18941:2011. Imaging materials. Colour reflection prints. Test method for ozone gas fading stability
BS ISO 18944:2012. Imaging materials. Reflection colour photographic prints. Test print construction and measurement
BS ISO 18946:2011. Imaging materials. Reflection colour photographic prints. Method for testing humidity fastness
BS ISO 18947:2013. Imaging materials. Photographic reflection prints. Determination of abrasion resistance of photographic images
BS ISO 19003:2006. Rubber and rubber products. Guidance on the application of statistics to physical testing
BS ISO 19005-1:2005. Document management. Electronic document file format for long-term preservationUse of PDF 1.4 (PDF/A-1)
BS ISO 19005-2:2011. Document management. Electronic document file format for long-term preservationUse of ISO 32000-1 (PDF/A-2)
BS ISO 19005-3:2012. Document management. Electronic document file format for long-term preservationUse of ISO 32000-1 with support for embedded files (PDF/A-3)
BS ISO 19012-1:2007. Optics and photonics. Designation of microscope objectivesFlatness of field/plan
BS ISO 19012-1:2011. Microscopes. Designation of microscope objectivesFlatness of field/Plan
BS ISO 19012-1:2013. Microscopes. Designation of microscope objectivesFlatness of field/Plan
BS ISO 19012-2:2009. Optics and photonics. Designation of microscope objectivesChromatic correction
BS ISO 19012-2:2013. Microscopes. Designation of microscope objectivesChromatic correction
BS ISO 19013-1:2005. Rubber hoses and tubing for fuel circuits for internal combustionengines . SpecificationDiesel fuels
BS ISO 19013-2:2005. Rubber hoses and tubing for fuel circuits for internal combustion engines. SpecificationGasoline fuels
BS ISO 19018:2004. Ships and marine technology. Terms, abbreviations, graphical symbols and concepts on navigation
BS ISO 19072-1:2007. Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connectionsPocket interface definition
BS ISO 19072-2:2007. Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connectionsTest methods and general performance requirements
BS ISO 19072-2:2013. Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connectionsTest methods and general performance requirements
BS ISO 19078:2006. Gas cylinders. Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
BS ISO 19078:2013. Gas cylinders. Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
BS ISO 19144-2:2012. Geographic information. Classification systemsLand Cover Meta Language (LCML)
BS ISO 19145:2013. Geographic information. Registry of representations of geographic point location
BS ISO 19149:2011. Geographic information. Rights expression language for geographic information. GeoREL
BS ISO 19155:2012. Geographic information. Place Identifier (PI) architecture
BS ISO 1919:1998. Road vehicles. M14 x 1,25 spark plugs with flat seating and their cylinder head housings
BS ISO 1920-8:2009. Testing of concreteDetermination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory
BS ISO 1920-9:2009. Testing of concreteDetermination of creep of concrete cylinders in compression
BS ISO 19212:2006. Adhesives. Determination of temperature dependence of shear strength
BS ISO 1922:2001. Rigid cellular plastics. Determination of shear strength
BS ISO 1922:2012. Rigid cellular plastics. Determination of shear strength
BS ISO 19238:2004. Radiation protection. Performance criteria for service laboratories performing biological dosimetry by cytogenetics
BS ISO 1924-3:2005. Paper and board. Determination of tensile propertiesConstant rate of elongation method (100 mm/min)
BS ISO 1925:2001. Mechanical vibration. Balancing. Vocabulary
BS ISO 1926:2005. Rigid cellular plastics. Determination of tensile properties
BS ISO 1926:2009. Rigid cellular plastics. Determination of tensile properties
BS ISO 1928:2009. Solid mineral fuels. Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
BS ISO 19318:2004. Surface chemical analysis. X-ray photoelectron spectroscopy. Reporting of methods used for charge control and charge correction
BS ISO 19332:2007. Oil of blue chamomile [Chamomilla recutita (L.) Rauschert syn. Matricaria chamomilla auct.]
BS ISO 19334:2006. Binders for paints and varnishes. Gum rosin. Gas-chromatographic analysis
BS ISO 19378:2003. Lubricants, industrial oils and related products (class L). Machine-tool lubricants. Categories and specifications
BS ISO 19379:2003. Ships and marine technology. ECS databases. Content, quality, updating and testing
BS ISO 1940-1:2003. Mechanical vibration. Balance quality requirements for rotors in a constant (rigid) stateSpecification and verification of balance tolerances
BS ISO 19438:2003. Diesel fuel and petrol filters for internal combustion engines. Filtration efficiency using particle counting and contaminant retention capacity
BS ISO 19472:2006. Machinery for forestry. Winches. Dimensions, performance and safety
BS ISO 19499:2007. Mechanical vibration. Balancing. Guidance on the use and application of balancing standards
BS ISO 1951:2007. Presentation/representation of entries in dictionaries. Requirements, recommendations and information
BS ISO 1952:2008. Solid mineral fuels. Determination of extractable metals in dilute hydrochloric acid
BS ISO 1957:2000. Machine-made textile floor coverings. Selection and cutting of specimens for physical tests
BS ISO 19579:2006. Solid mineral fuels. Determination of sulfur by IR spectrometry
BS ISO 19701:2005. Methods for sampling and analysis of fire effluents
BS ISO 19701:2013. Methods for sampling and analysis of fire effluents
BS ISO 19703:2005. Generation and analysis of toxic gases. Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires
BS ISO 19706:2007. Guidelines for assessing the fire threat to people
BS ISO 19706:2011. Guidelines for assessing the fire threat to people
BS ISO 19719:2010. Machine tools. Work holding chucks. Vocabulary
BS ISO 19730:2008. Soil quality. Extraction of trace elements from soil using ammonium nitrate solution
BS ISO 19732:2007. Equipment for crop protection. Sprayer filters. Colour coding for identification
BS ISO 1977:2000. Conveyor chains, attachments and sprockets
BS ISO 1977:2006. Conveyor chains, attachments and sprockets
BS ISO 19812:2006. Road vehicles. M10 x 1 compact spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings
BS ISO 19813:2006. Road vehicles. Ignition systems. Test methods and requirements for high voltage boots on plug-top coils and pencil coils
BS ISO 19819:2004. Metallic materials. Tensile testing in liquid helium
BS ISO 1984-1:2001. Test conditions for manually controlled milling machines with table of fixed height. Testing of the accuracyMachines with horizontal spindle
BS ISO 1984-2:2001. Test conditions for manually controlled milling machines with table of fixed height. Testing of the accuracyMachines with vertical spindle
BS ISO 1985:1998. Machine tools. Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table. Testing of the accuracy
BS ISO 19860:2005. Gas turbines. Data acquisition and trend monitoring system requirements for gas turbine installations
BS ISO 1986-1:2001. Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table. Testing of the accuracyMachines with a table length of up to 1600mm
BS ISO 19892:2011. Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of joints to pressure cycling
BS ISO 19893:2011. Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of mounted assemblies to temperature cycling
BS ISO 19899:2010. Plastics piping systems. Polyolefin pipes and mechanical fitting assemblies. Test method for the resistance to end load (AREL test)
BS ISO 199:1997. Rolling bearings. Thrust bearings. Tolerances
BS ISO 199:2005. Rolling bearings. Thrust bearings. Tolerances
BS ISO 19921:2005. Ships and marine technology. Fire resistance of metallic pipe components with resilient and elastomeric seals. Test methods
BS ISO 19922:2005. Ships and marine technology. Fire resistance of metallic pipe components with resilient and elastomeric seals. Requirements on the test bench
BS ISO 19932-1:2006. Equipment for crop protection. Knapsack sprayersRequirements and test methods
BS ISO 19932-2:2006. Equipment for crop protection. Knapsack sprayersPerformance limits
BS ISO 19933:2007. Space systems. Format for spacecraft launch environment test report
BS ISO 19959:2005. Visual examination of the surface condition of investment castings. Steel, nickel alloys and cobalt alloys
BS ISO 19960:2005. Cast steels and alloys with special physical properties
BS ISO 1997:1992. Granulated cork and cork powder. Classification, properties and packing
BS ISO 19973-1:2007. Pneumatic fluid power - Assessment of component reliability by testingGeneral procedures
BS ISO 19973-2:2007. Pneumatic fluid power. Assessment of component reliability by testingDirectional control valves
BS ISO 19973-3:2007. Pneumatic fluid power. Assessment of component reliability by testingCylinders with piston rod
BS ISO 19973-4:2007. Pneumatic fluid power. Assessment of component reliability by testingPressure regulators
BS ISO 1998-1:1998. Petroleum industry. TerminologyRaw materials and products
BS ISO 1998-2:1998. Petroleum industry. TerminologyProperties and tests
BS ISO 1998-3:1998. Petroleum industry. TerminologyExploration and production
BS ISO 1998-4:1998. Petroleum industry. TerminologyRefining
BS ISO 1998-5:1998. Petroleum industry. TerminologyTransport, storage, distribution
BS ISO 1998-6:2000. Petroleum industry. TerminologyMeasurement
BS ISO 1998-7:1998. Petroleum industry. TerminologyMiscellaneous terms
BS ISO 1998-99:2000. Petroleum industry. TerminologyGeneral and index
BS ISO 1999:2013. Acoustics. Estimation of noise-induced hearing loss
BS ISO 2000:2003. Rubber, raw natural. Guidelines for the specification of technically specified grades (TSR)
BS ISO 20022-1:2004. Financial services. UNIversal Financial industry message schemeOverall methodology and format specifications for inputs to and outputs from the ISO 20022 repository
BS ISO 20022-1:2013. Financial services. Universal financial industry message schemeMetamodel
BS ISO 20022-2:2004. Financial services. UNIversal Financial Industry message schemeRoles and responsibilities of the registration bodies
BS ISO 20022-2:2007. Financial services. UNIversal Financial Industry message schemeRoles and responsibilities of the registration bodies
BS ISO 20022-2:2013. Financial services. Universal financial industry message schemeUML profile
BS ISO 20022-3:2013. Financial services. Universal financial industry message schemeModelling
BS ISO 20022-4:2013. Financial services. Universal financial industry message schemeXML Schema generation
BS ISO 20022-5:2013. Financial services. Universal financial industry message schemeReverse engineering
BS ISO 20022-6:2009. Financial services. UNIversal Financial industry message schemeMessage transport characteristics
BS ISO 20022-6:2013. Financial services. Universal financial industry message schemeMessage transport characteristics
BS ISO 20022-7:2013. Financial services. Universal financial industry message schemeRegistration
BS ISO 20022-8:2013. Financial services. Universal financial industry message schemeASN.1 generation
BS ISO 20032:2007. Method for evaluation of tensile properties of metallic superplastic materials
BS ISO 20032:2013. Method for evaluation of tensile properties of metallic superplastic materials
BS ISO 2004:2010. Natural rubber latex concentrate. Centrifuged or creamed, ammonia-preserved types. Specifications
BS ISO 2006-1:2009. Rubber latex, synthetic. Determination of mechanical stabilityHigh-speed method
BS ISO 2006-2:2009. Rubber latex, synthetic. Determination of mechanical stabilityModerate-speed method under load
BS ISO 2007:2007. Rubber, unvulcanized. Determination of plasticity. Rapid-plastimeter method
BS ISO 20121:2012. Event sustainability management systems. Requirements with guidance for use
BS ISO 20128:2006. Milk products. Enumeration of presumptive Lactobacillus acidophilus on a selective medium. Colony-count technique at 37°C
BS ISO 20140-1:2013. Automation systems and integration. Evaluating energy efficiency and other factors of manufacturing systems that influence the environmentOverview and general principles
BS ISO 20160:2006. Implants for surgery. Metallic materials. Classification of microstructures for alpha+beta titanium alloy bars
BS ISO 2017-1:2005. Mechanical vibration and shock. Resilient mounting systemsTechnical information to be exchanged for the application of isolation systems
BS ISO 2017-2:2007. Mechanical vibration and shock. Resilient mounting systemsTechnical information to be exchanged for the application of vibration isolation associated with railway systems
BS ISO 20176:2006. Road vehicles. H-point machine (HPM II). Specifications and procedure for H-point determination
BS ISO 20176:2011. Road vehicles. H-point machine (HPM-II). Specifications and procedure for H-point determination
BS ISO 20193:2012. Tobacco and tobacco products. Determination of the width of the strands of cut tobacco
BS ISO 2020-1:1997. Aerospace. Preformed flexible steel wire rope for aircraft controlsDimensions and loads
BS ISO 2020-2:1997. Aerospace. Preformed flexible steel wire rope for aircraft controlsTechnical specification
BS ISO 20202:2004. Carbonaceous materials used in the production of aluminium. Cold and tepid ramming pastes. Preparation of baked test pieces and determination of loss on baking
BS ISO 20203:2005. Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of crystallite size of calcined petroleum coke by X-ray diffraction
BS ISO 2023:1994. Rubber footwear. Lined industrial vulcanized-rubber boots. Specification
BS ISO 20252:2006. Market, opinion and social research. Vocabulary and service requirements
BS ISO 20252:2012. Market, opinion and social research. Vocabulary and service requirements
BS ISO 2028:1999. Synthetic rubber latex. Preparation of dry polymer
BS ISO 20280:2007. Soil quality. Determination of arsenic, antimony and selenium in aqua regia soil extracts with electrothermal or hydride-generation atomic absorption spectrometry
BS ISO 20282-1:2006. Ease of operation of everyday productsDesign requirements for context of use and user characteristics
BS ISO 20283-2:2008. Mechanical vibration. Measurement of vibration on shipsMeasurement of structural vibration
BS ISO 20283-3:2006. Mechanical vibration. Measurement of vibration on shipsPre-installation vibratory noise measurement of shipboard equipment
BS ISO 20283-4:2012. Mechanical vibration. Measurement of vibration on shipsMeasurement and evaluation of vibration of the ship propulsion machinery
BS ISO 20292:2009. Materials for the production of primary aluminium. Dense refractory bricks. Determination of cryolite resistance
BS ISO 20299-1:2006. Film for wrapping rubber balesButadiene rubber (BR) and styrene-butadiene rubber (SBR)
BS ISO 20299-3:2008. Film for wrapping rubber balesEthylene-propylene-diene rubber (EPDM), acrylonitrile- butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
BS ISO 20301:2006. Health informatics. Health cards. General characteristics
BS ISO 20302:2006. Health informatics. Health cards. Numbering system and registration procedure for issuer identifiers
BS ISO 20341:2003. Surface chemical analysis. Secondary-ion mass spectrometry. Method for estimating depth resolution parameters with multiple delta-layer reference materials
BS ISO 20369:2009. Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products. Determination of citrate content
BS ISO 20370:2009. Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products. Determination of acetate content
BS ISO 20401:2005. Pneumatic fluid power systems. Directional control valves. Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm
BS ISO 2041:2009. Mechanical vibration, shock and condition monitoring. Vocabulary
BS ISO 20421-1:2006. Cryogenic vessels. Large transportable vacuum-insulated vesselsDesign, fabrication, inspection and testing
BS ISO 20433:2005. Leather. Tests for colour fastness. Colour fastness to crocking
BS ISO 20462-1:2005. Photography. Psychophysical experimental methods for estimating image qualityOverview of psychophysical elements
BS ISO 20462-2:2005. Photography. Psychophysical experimental methods for estimating image qualityTriplet comparison method
BS ISO 20462-3:2005. Photography. Psychophysical experimental methods for estimating image qualityQuality ruler method
BS ISO 20462-3:2012. Photography. Psychophysical experimental methods for estimating image qualityQuality ruler method
BS ISO 20473:2007. Optics and photonics. Spectral bands
BS ISO 20481:2008. Coffee and coffee products. Determination of the caffeine content using high performance liquid chromatography (HPLC). Reference method
BS ISO 20508:2003. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of light transmittance of ceramic films with transparent substrate
BS ISO 20515:2007. Rolling bearings. Radial bearings, retaining slots. Dimensions and tolerances
BS ISO 20515:2012. Rolling bearings. Radial bearings, retaining slots. Dimensions and tolerances
BS ISO 20516:2007. Rolling bearings. Aligning thrust ball bearings and aligning seat washers. Boundary dimensions
BS ISO 20552:2007. Workplace air. Determination of mercury vapour. Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
BS ISO 20652:2006. Space data and information transfer systems. Producer-archive interface. Methodology abstract standard
BS ISO 20653:2006. Road vehicles. Degrees of protection (IP-Code). Protection of electrical equipment against foreign objects, water and access
BS ISO 20653:2013. Road vehicles. Degrees of protection (IP code). Protection of electrical equipment against foreign objects, water and access
BS ISO 20665:2008. Water quality. Determination of chronic toxicity to Ceriodaphnia dubia
BS ISO 20672:2007. Ships and marine technology. Rate of turn indicators
BS ISO 20673:2007. Ships and marine technology. Electric rudder angle indicators
BS ISO 20683-1:2005. Aircraft ground equipment. Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear Main-line aircraft
BS ISO 20683-2:2004. Aircraft ground equipment. Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear Regional aircraft
BS ISO 20703:2006. Gas cylinders. Refillable welded aluminium-alloy cylinders. Design, construction and testing
BS ISO 20712-1:2008. Water safety signs and beach safety flagsSpecifications for water safety signs used in workplaces and public areas
BS ISO 20712-2:2007. Water safety signs and beach safety flagsSpecifications for beach safety flags. Colour, shape, meaning and performance
BS ISO 20712-3:2008. Water safety signs and beach safety flagsGuidance for use
BS ISO 20752:2007. Cork stoppers. Determination of releasable 2, 4, 6 trichloroanisol (TCA)
BS ISO 20753:2008. Plastics. Test specimens
BS ISO 2076:1999. Textiles. Man-made fibres. Generic names
BS ISO 2076:2010. Textiles. Man-made fibres. Generic names
BS ISO 20765-1:2005. Natural gas. Calculation of thermodynamic propertiesGas phase properties for transmission and distribution applications
BS ISO 20773:2007. Cigarettes. Determination of nicotine-free dry particulate matter and nicotine in sidestream smoke. Method using a routine analytical linear smoking machine equipped with a fishtail chimney
BS ISO 20773:2013. Cigarettes. Determination of nicotine-free dry particulate matter and nicotine in sidestream smoke. Method using a routine analytical linear smoking machine equipped with a fishtail chimney
BS ISO 20774:2007. Cigarettes. Determination of carbon monoxide in sidestream smoke. Method using a routine analytical linear smoking machine equipped with a fishtail chimney
BS ISO 20774:2013. Cigarettes. Determination of carbon monoxide in sidestream smoke. Method using a routine analytical linear smoking machine equipped with a fishtail chimney
BS ISO 20775:2009. Information and documentation. Schema for holdings information
BS ISO 20785-1:2012. Dosimetry for exposures to cosmic radiation in civilian aircraftConceptual basis for measurements
BS ISO 20785-2:2011. Dosimetry for exposures to cosmic radiation in civilian aircraftCharacterization of instrument response
BS ISO 20805:2005. Hot-rolled sheet steel in coils of higher yield strength with improved formability and heavy thickness for cold forming
BS ISO 20805:2011. Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming
BS ISO 20806:2004. Mechanical vibration. Criteria and safeguards for the in-situ balancing of medium and large rotors
BS ISO 20806:2009. Mechanical vibration. Criteria and safeguards for the in-situ balancing of medium and large rotors
BS ISO 20826:2006. Automotive LPG components. Containers
BS ISO 20828:2006. Road vehicles. Security certificate management
BS ISO 20858:2007. Ships and marine technology. Maritime port facility security assessments and security plan development
BS ISO 20859:2005. Cinematography. Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm film
BS ISO 20860-1:2008. Road vehicles. 50 ohms impedance radio frequency connection system interfaceDimensions and electrical requirements
BS ISO 20860-2:2009. Road vehicles. 50 ohms impedance radio frequency connection system interfaceTest procedures
BS ISO 20898:2008. Industrial trucks. Electrical requirements
BS ISO 209:2007. Aluminium and aluminium alloys. Chemical composition
BS ISO 20903:2006. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results
BS ISO 20903:2011. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results
BS ISO 20904:2006. Hard coal. Sampling of slurries
BS ISO 20906:2009+A1:2013. Acoustics. Unattended monitoring of aircraft sound in the vicinity of airports
BS ISO 20918:2007. Road vehicles. Braking threshold pressures for heavy commercial vehicle combinations with fully pneumatic braking systems. Test with roller brake tester
BS ISO 20938:2008. Instant coffee. Determination of moisture content. Karl Fischer method (Reference method)
BS ISO 2094:1999 (R05). Textile floor coverings. Determination of thickness loss under dynamic loading
BS ISO 2094:1999. Textile floor coverings. Determination of thickness loss under dynamic loading
BS ISO 20957-1:2005. Stationary training equipmentGeneral safety requirements and test methods
BS ISO 20957-2:2005. Stationary training equipmentStrength training equipment. Additional specific safety requirements and test methods
BS ISO 20958:2013. Condition monitoring and diagnostics of machine systems. Electrical signature analysis of three-phase induction motors
BS ISO 20965:2005. Plastics. Determination of the transient extensional viscosity of polymer melts
BS ISO 20966:2007. Automatic milking installations. Requirements and testing
BS ISO 20998-1:2006. Measurement and characterization of particles by acoustic methodsConcepts and procedures in ultrasonic attenuation spectroscopy
BS ISO 20998-2:2013. Measurement and characterization of particles by acoustic methodsGuidelines for linear theory
BS ISO 21005:2004. Ships and marine technology. Thermally toughened safety glass panes for windows and side scuttles
BS ISO 21005:2012. Ships and marine technology. Thermally toughened safety glass panes for windows and side scuttles
BS ISO 21006:2006. Internal combustion engines. Engine weight (mass) declaration
BS ISO 21009-1:2008. Cryogenic vessels. Static vacuum-insulated vesselsDesign, fabrication, inspection and tests
BS ISO 21010:2004. Cryogenic vessels. Gas/materials compatibility
BS ISO 21011:2008. Cryogenic vessels. Valves for cryogenic service
BS ISO 21012:2006. Cryogenic vessels. Hoses
BS ISO 21013-1:2008. Cryogenic vessels. Pressure-relief accessories for cryogenic serviceReclosable pressure-relief valves
BS ISO 21013-2:2007. Cryogenic vessels. Pressure-relief accessories for cryogenic serviceNon-reclosable pressure-relief devices
BS ISO 21013-3:2006. Cryogenic vessels. Pressure-relief accessories for cryogenic serviceSizing and capacity determination
BS ISO 21013-4:2012. Cryogenic vessels. Pilot operated pressure-relief devicesPressure-relief accessories for cryogenic service
BS ISO 21014:2006. Cryogenic vessels. Cryogenic insulation performance
BS ISO 21015:2007. Office furniture. Office work chairs. Test methods for the determination of stability, strength and durability
BS ISO 21016:2007. Office furniture. Tables and desks. Test methods for the determination of stability, strength and durability
BS ISO 21018-1:2008. Hydraulic fluid power. Monitoring the level of particulate contamination of the fluidGeneral principles
BS ISO 21018-3:2008. Hydraulic fluid power. Monitoring the level of particulate contamination of the fluidUse of the filter blockage technique
BS ISO 21047:2009. Information and documentation. International standard text code (ISTC)
BS ISO 21048:2004. Plastics. Epoxy resins. Determination of 1,2-glycol content
BS ISO 21067:2007. Packaging. Vocabulary
BS ISO 21069-2:2008. Road vehicles. Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake testerAir over hydraulic and purely hydraulic braking systems
BS ISO 21070:2011. Ships and marine technology. Marine environment protection. Management and handling of shipboard garbage
BS ISO 21072-1:2009. Ships and marine technology. Marine environment protection. Performance testing of oil skimmersMoving water conditions
BS ISO 21072-2:2009. Ships and marine technology. Marine environment protection. Performance testing of oil skimmers.Static water conditions
BS ISO 21072-3:2010. Ships and marine technology. Marine environment protection. Performance testing of oil skimmersHigh viscosity oil
BS ISO 2108:2005. Information and documentation. International standard book number (ISBN)
BS ISO 21093:2003. Oil of dwarf pine (Pinus mugo Turra)
BS ISO 21094:2008. Optics and photonics. Telescopic systems. Specifications for night vision devices
BS ISO 2110:1989. Information technology. Data communication. 25-pole DTE/DCE interface connector and contact number assignments
BS ISO 21107:2004. Rolling bearings and spherical plain bearings. Search structure for electronic media. Characteristics and performance criteria identified by attribute vocabulary
BS ISO 21127:2006. Information and documentation. A reference ontology for the interchange of cultural heritage information
BS ISO 21128:2006. Cork stoppers. Determination of oxidizing residues. Iodometric titration method
BS ISO 2113:1996. Reinforcement fibres. Woven fabrics. Basis for a specification
BS ISO 21147:2003. Fine-cut tobacco and smoking articles made from it. Survey and analysis of consumer-made articles
BS ISO 21188:2006. Public key infrastructure for financial services. Practices and policy framework
BS ISO 212:1973. Essential oils. Sampling
BS ISO 212:2007+A1:2012. Essential oils. Sampling
BS ISO 21207:2004. Corrosion tests in artificial atmospheres. Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying
BS ISO 21210:2012. Intelligent transport systems. Communications access for land mobiles (CALM). IPv6 Networking
BS ISO 21212:2008. Intelligent transport systems. Communications access for land mobiles (CALM). 2G Cellular systems
BS ISO 21213:2008. Intelligent transport systems. Communications access for land mobiles (CALM). 3G Cellular systems
BS ISO 21214:2006. Intelligent transport systems. Continuous air interface, long and medium range (CALM). Infra-red systems
BS ISO 21215:2010. Intelligent transport systems. Communications access for land mobiles (CALM). M5
BS ISO 21216:2011. Intelligent transport systems. Wireless communications. CALM using millimetre communications. Air interface
BS ISO 21216:2012. Intelligent transport systems. Communication access for land mobiles (CALM). Millimetre wave air interface
BS ISO 21217:2010. Intelligent transport systems. Communications access for land mobiles (CALM). Architecture
BS ISO 21218:2008. Intelligent transport systems. Communications access for land mobiles (CALM). Medium service access points
BS ISO 21218:2013. Intelligent transport systems. Communications access for land mobiles (CALM). Access technology support
BS ISO 21238:2007. Nuclear energy. Nuclear fuel technology. Scaling factor method to determine the radioactivity of low and intermediate-level radioactive waste packages generated at nuclear power plants
BS ISO 21243:2008. Radiation protection. Performance criteria for laboratories performing cytogenetic triage for assessment of mass casualties in radiological or nuclear emergencies. General principles and application to dicentric assay
BS ISO 21244:2008. Agricultural equipment. Mechanical connections between towed and towing vehicles. Implement hitch rings and attachment to tractor drawbars
BS ISO 21247:2005. Combined accept-zero sampling systems and process control procedures for product acceptance
BS ISO 21270:2004. Surface chemical analysis. X-ray photoelectron and Auger electron spectrometers. Linearity of intensity scale
BS ISO 21278-1:2008. Equipment for crop protection. Induction hoppersTest methods
BS ISO 21278-2:2008. Equipment for crop protection. Induction hoppersGeneral requirements and performance limits
BS ISO 21287:2004. Pneumatic fluid power. Cylinders. Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm
BS ISO 21289:2008. Mechanical vibration and shock. Parameters to be specified for the acquisition of vibration data
BS ISO 21307:2009. Plastics pipes and fittings. Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
BS ISO 21307:2011. Plastics pipes and fittings. Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
BS ISO 21308-2:2006. Road vehicles. Product data exchange between chassis and bodywork manufacturers (BEP)Dimensional bodywork exchange parameters
BS ISO 21308-3:2007. Road vehicles. Product data exchange between chassis and bodywork manufacturers (BEP)General, mass and administrative exchange parameters
BS ISO 21318:2007. Plastics. Epoxy resins. Determination of electrical conductivity of aqueous resin extracts
BS ISO 21338:2010. Water quality. Kinetic determination of the inhibitory effects of sediment, other solids and coloured samples on the light emission of Vibrio fischeri (kinetic luminescent bacteria test)
BS ISO 21348:2007. Space environment (natural and artificial). Process for determining solar irradiances
BS ISO 21349:2007. Space systems. Project reviews
BS ISO 2135:2010. Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
BS ISO 21350:2007. Space systems. Off-the-shelf item utilization
BS ISO 21358:2007. Vacuum technology. Right-angle valve. Dimensions and interfaces for pneumatic actuator
BS ISO 21360:2007. Vacuum technology. Standard methods for measuring vacuum-pump performance. General description
BS ISO 21360-1:2012. Vacuum technology. Standard methods for measuring vacuum-pump performanceGeneral description
BS ISO 21360-2:2012. Vacuum technology. Standard methods for measuring vacuum-pump performancePositive displacement vacuum pumps
BS ISO 21368:2005. Adhesives. Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures
BS ISO 21389:2004. Oil of gum turpentine, Chinese (mainly from Pinus massoniana Lamb.)
BS ISO 21390:2005. Oil of wintergreen, China [Gaultheria yunnanensis (Franch.) Rehd.], redistilled
BS ISO 21398:2007. Hard coal and coke. Guidance to the inspection of mechanical sampling systems
BS ISO 21413:2005. Manual methods for the measurement of a groundwater level in a well
BS ISO 21427-1:2006, BS 6068-5.44:2006. Water quality. Evaluation of the genotoxicity by measurement of the induction of micronucleiEvaluation of genotoxicity using amphibian larvae
BS ISO 21438-1:2007. Workplace atmospheres. Determination of inorganic acids by ion chromatographyNon-volatile acids (sulphuric acid and phosphoric acid)
BS ISO 21438-2:2009. Workplace atmospheres. Determination of inorganic acids by ion chromatographyVolatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid)
BS ISO 21438-3:2010. Workplace atmospheres. Determination of inorganic acids by ion chromatographyHydrofluoric acid and particulate fluorides
BS ISO 21439:2009. Clinical dosimetry. Beta radiation sources for brachytherapy
BS ISO 2144:1997. Paper, board and pulps. Determination of residue (ash) on ignition at 900 °C
BS ISO 21459:2006. Space data and information transfer systems. Proximity-1 space link protocol. Coding and synchronization sublayer
BS ISO 2146:2010. Information and documentation. Registry services for libraries and related organizations
BS ISO 21460:2006. Space data and information transfer systems. Proximity-1 space link protocol. Physical layer
BS ISO 21460:2007. Space data and information transfer systems. Proximity-1 space link protocol. Physical layer
BS ISO 21461:2006. Rubber. Determination of the aromaticity of oil in vulcanized rubber compounds
BS ISO 21461:2009. Rubber. Determination of the aromaticity of oil in vulcanized rubber compounds
BS ISO 21461:2012. Rubber. Determination of the aromaticity of oil in vulcanized rubber compounds
BS ISO 21482:2007. Ionizing-radiation warning. Supplementary symbol
BS ISO 21483:2013. Determination of solubility in nitric acid of plutonium in unirradiated mixed oxide fuel pellets (U, Pu) O2
BS ISO 21485:2006. Textile machinery. Draw frame for cotton spinning. Vocabulary and principles of construction
BS ISO 21500:2012. Guidance on project management
BS ISO 21501-1:2009. Determination of particle size distribution. Single particle light interaction methodsLight scattering aerosol spectrometer
BS ISO 21501-2:2007. Determination of particle size distribution. Single particle light interaction methodsLight scattering liquid-borne particle counter
BS ISO 21501-3:2007. Determination of particle size distribution. Single particle light interaction methodsLight extinction liquid-borne particle counter
BS ISO 21501-4:2007. Determination of particle size distribution. Single particle light interaction methodsLight scattering airborne particle counter for clean spaces
BS ISO 21507:2005. Earth-moving machinery. Performance requirements for non-metallic fuel tanks
BS ISO 21507:2010. Earth-moving machinery. Performance requirements for non-metallic fuel tanks
BS ISO 21509:2006. Plastics and ebonite. Verification of Shore durometers
BS ISO 21527-1:2008. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of yeasts and mouldsColony count technique in products with water activity greater than 0,95
BS ISO 21527-2:2008. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of yeasts and mouldsColony count technique in products with water activity less than or equal to 0,95
BS ISO 21528-1:2004. Microbiology of food and animal feeding stuffs. Horizontal methods for the detection and enumeration of EnterobacteriaceaeDetection and enumeration by MPN technique with pre-enrichment
BS ISO 21528-2:2004. Microbiology of food and animal feeding stuffs. Horizontal methods for the detection and enumeration of EnterobacteriaceaeColony-count method
BS ISO 21537-1:2004. Clamping flanges for superabrasive cutting-off wheels. Natural stoneNatural stone
BS ISO 21537-2:2004. Clamping flanges for superabrasive cutting-off wheelsBuilding and construction
BS ISO 21538:2004. Blanks for superabrasive cutting-off wheels. Mounting and fixing bores. Building construction and civil engineering
BS ISO 21543:2006. Milk products. Guidelines for the application of near infrared spectrometry
BS ISO 21550:2004. Photography. Electronic scanners for photographic images. Dynamic range measurements
BS ISO 21561:2005+A1:2010. Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR
BS ISO 21601:2013. Corrosion of metals and alloys. Guidelines for assessing the significance of stress corrosion cracks detected in service
BS ISO 21608:2012. Corrosion of metals and alloys. Test method for isothermalexposure oxidation testing under high-temperature corrosion conditions for metallic materials
BS ISO 21610:2009. Corrosion of metals and alloys. Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels
BS ISO 21628:2008. Gardening machinery. Powered material-collecting systems. Safety
BS ISO 21630:2007. Pumps. Testing. Submersible mixers for wastewater and similar applications
BS ISO 21648:2008. Space systems. Flywheel module design and testing
BS ISO 21667:2010. Health informatics. Health indicators conceptual framework
BS ISO 21669:2005. Steel wire ropes. Determination of rotational properties
BS ISO 21687:2007. Carbonaceous materials used in the production of aluminium. Determination of density by gas pyknometry (volumetric) using helium as the analysis gas. Solid materials
BS ISO 2173:2003. Fruit and vegetable products. Determination of soluble solids. Refractometric method
BS ISO 21731:2006. Health informatics. HL7 version 3. Reference information model. Release 1
BS ISO 21747:2006. Statistical methods. Process performance and capability statistics for measured quality characteristics
BS ISO 21748:2010. Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
BS ISO 21750:2006. Road vehicles. Safety enhancement in conjunction with tyre inflation pressure monitoring
BS ISO 21751:2011. Plastics pipes and fittings. Decohesion test of electrofusion assemblies. Strip-bend test
BS ISO 21771:2007. Gears. Cylindrical involute gears and gear pairs. Concepts and geometry
BS ISO 21789:2009. Gas turbine applications. Safety
BS ISO 21807:2004. Microbiology of food and animal feeding stuffs. Determination of water activity
BS ISO 21809-4:2009. Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systemsPolyethylene coatings (2-layer PE)
BS ISO 21848:2005. Road vehicles. Electrical and electronic equipment for a supply voltage of 42 V. Electrical loads
BS ISO 21849:2006. Aircraft and space. Industrial data. Product identification and traceability
BS ISO 2186:2007. Fluid flow in closed conduits. Connections for pressure signal transmissions between primary and secondary elements
BS ISO 21869:2006. Rubber compounding ingredients. Magnesium oxide. Methods of test
BS ISO 2187:1990. Spinning preparatory machinery, spinning and doubling (twisting) machinery. List of equivalent terms
BS ISO 21870:2005. Rubber compounding ingredients. Carbon black. Determination of high-temperature loss on heating by thermogravimetry
BS ISO 21927-1:2008. Smoke and heat control systemsSpecification for smoke barriers
BS ISO 21927-10:2011. Smoke and heat control systemsSpecification for power output devices
BS ISO 21927-2:2006+A1:2010. Smoke and heat control systemsSpecification for natural smoke and heat exhaust ventilators
BS ISO 21927-3:2006+A1:2010. Smoke and heat control systemsSpecification for powered smoke and heat exhaust ventilators
BS ISO 21927-9:2012. Smoke and heat control systemsSpecification for control equipment
BS ISO 21930:2007. Sustainability in building construction. Environmental declaration of building products
BS ISO 21931-1:2010. Sustainability in building construction. Framework for methods of assessment of the environmental performance of construction worksBuildings
BS ISO 21940-13:2012. Mechanical vibration. Rotor balancingCriteria and safeguards for the insitu balancing of medium and large rotors
BS ISO 21940-14:2012. Mechanical vibration. Rotor balancingProcedures for assessing balance errors
BS ISO 21940-21:2012. Mechanical vibration. Rotor balancingDescription and evaluation of balancing machines
BS ISO 21940-23:2012. Mechanical vibration. Rotor balancingEnclosures and other protective measures for the measuring station of balancing machines
BS ISO 21940-31:2013. Mechanical vibration. Rotor balancingSusceptibility and sensitivity of machines to unbalance
BS ISO 21940-32:2012. Mechanical vibration. Rotor balancingShaft and fitment key convention
BS ISO 21948:2001. Coated abrasives. Plain sheets
BS ISO 21949:2001. Coated abrasives. Plain sheets with holes for dust extraction
BS ISO 21950:2001. Coated abrasives. Plain discs
BS ISO 21951:2001. Coated abrasives. Plain discs with holes for dust extraction
BS ISO 21961:2003. Space data and information transfer systems. Data entity dictionary specification language (DEDSL). Abstract syntax
BS ISO 21962:2003. Aerospace series. Space data and information transfer systems. Data entity dictionary specification language (DEDSL). PVL syntax
BS ISO 21988:2006. Abrasion-resistant cast irons. Classification
BS ISO 21994:2007. Passenger cars. Stopping distance at straight-line braking with ABS. Open-loop test method
BS ISO 21995:2008. Road vehicles. Test of vehicle air braking systems with a permissible mass of over 3,5 t. Acquisition and use of reference values using a roller brake tester
BS ISO 22009:2009. Space systems. Space environment (natural and artificial). Model of the earth's magnetospheric magnetic field
BS ISO 22010:2007. Space systems. Mass properties control
BS ISO 22028-1:2004. Photography and graphic technology. Extended colour encodings for digital image storage, manipulation and interchangeArchitecture and requirements
BS ISO 22028-2:2013. Photography and graphic technology. Extended colour encodings for digital image storage, manipulation and interchangeReference output medium metric RGB colour image encoding (ROMM RGB)
BS ISO 22029:2003. Standard file format for spectral data exchange
BS ISO 22029:2012. Microbeam analysis. EMSA/MAS standard file format for spectral-data exchange
BS ISO 22036:2008. Soil quality. Determination of trace elements in extracts of soil by inductively coupled plasma-atomic emission spectrometry (ICP-AES)
BS ISO 22037:2007. Solid end mills with corner radii and cylindrical shanks made of hard cutting materials. Dimensions
BS ISO 22048:2004. Surface chemical analysis. Information format for static secondary-ion mass spectrometry
BS ISO 22068:2012. Sintered-metal injection-moulded materials. Specifications
BS ISO 22072:2005. Electrohydrostatic actuator (EHA). Characteristics to be defined in procurement specifications
BS ISO 22072:2011. Aerospace. Electrohydrostatic actuator (EHA). Characteristics to be defined in procurement specifications
BS ISO 22089:2009. Aerospace. Hydraulic power transfer units. General specifications
BS ISO 22090-1:2002. Ships and marine technology. Transmitting heading devices (THDs)Gyro-compasses
BS ISO 22090-2:2004. Ships and marine technology. Transmitting heading devices (THDs)Geomagnetic principles
BS ISO 22090-3:2004. Ships and marine technology. Transmitting heading devices (THDs)GNSS principles
BS ISO 22096:2007. Condition monitoring and diagnostics of machines. Acoustic emission
BS ISO 22108:2008. Space systems. Non-flight items in flight hardware. Identification and control
BS ISO 22128:2008. Terminology products and services. Overview and guidance
BS ISO 22155:2005. Soil quality. Gas chromatographic quantitative determination of volatile aromatic and halogenated hydrocarbons and selected ethers. Static headspace method
BS ISO 22158:2011. Input/output protocols and electronic interfaces for water meters. Requirements
BS ISO 22168:2006. Road vehicles. Holding test of coatings influencing the colour of light emitted by light sources). Test methods
BS ISO 22178:2009. Intelligent transport systems. Low speed following (LSF) systems. Performance requirements and test procedures
BS ISO 22179:2009. Intelligent transport systems. Full speed range adaptive cruise control (FSRA) systems. Performance requirements and test procedures
BS ISO 2219:2010. Thermal insulation products for buildings. Factory-made products of expanded cork (ICB). Specification
BS ISO 22196:2007. Plastics. Measurement of antibacterial activity on plastics surfaces
BS ISO 22196:2011. Measurement of antibacterial activity on plastics and other non-porous surfaces
BS ISO 22197-1:2007. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materialsRemoval of nitric oxide
BS ISO 22197-2:2011. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materialsRemoval of acetaldehyde
BS ISO 22197-3:2011. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materialsRemoval of toluene
BS ISO 22197-4:2013. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materialsRemoval of formaldehyde
BS ISO 22197-5:2013. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materialsRemoval of methyl mercaptan
BS ISO 22198:2006. Textiles. Fabrics. Determination of width and length
BS ISO 22201:2009. Lifts (elevators). Design and development of programmable electronic systems in safety-related applications for lifts (PESSRAL)
BS ISO 22201-2:2013. Lifts (elevators), escalators and moving walks. Programmable electronic systems in safety related applicationsEscalators and moving walks (PESSRAE)
BS ISO 22222:2005. Personal financial planning. Requirements for personal financial planners
BS ISO 22234:2005. Cinematography. Relative and absolute sound pressure levels for motion-picture multi-channel sound systems. Measurement methods and levels applicable to analog photographic film audio, digital photographic film audio and D-cinema audio
BS ISO 22241-1:2006. Diesel engines. NOx reduction agent AUS 32Quality requirements
BS ISO 22241-2:2006. Diesel engines. NOx reduction agent AUS 32Test methods
BS ISO 22241-3:2008. Diesel engines. NOx reduction agent AUS 32Handling, transportation and storage
BS ISO 22241-4:2009. Diesel engines. NOx reduction agent AUS 32Refilling interface
BS ISO 22241-5:2012. Diesel engines. NOx reduction agent AUS 32Refilling interface for passenger cars
BS ISO 22242:2005+A1:2013. Road construction and road maintenance machinery and equipment. Basic types. Identification and description
BS ISO 22262-1:2012. Air quality. Bulk materialsSampling and qualitative determination of asbestos in commercial bulk materials
BS ISO 22263:2008. Organization of information about construction works. Framework for management of project information
BS ISO 22266-1:2009. Mechanical vibration. Torsional vibration of rotating machineryLand-based steam and gas turbine generator sets in excess of 50 MW
BS ISO 22274:2013. Systems to manage terminology, knowledge and content. Concept-related aspects for developing and internationalizing classification systems
BS ISO 2230:2002. Rubber products. Guidelines for storage
BS ISO 22301:2012 and BS ISO 22313:2012, BIP 2231:2013. BS ISO 22301:2012 and BS ISO 22313:2012 (A5 Laminated). Business Continuity Management Systems. Requirements and Guidance.
BS ISO 22301:2012. Societal security. Business continuity management systems. Requirements
BS ISO 22303:2008. Tobacco. Determination of tobacco specific nitrosamines. Method using buffer extraction
BS ISO 22308:2005. Cork stoppers. Sensory analysis
BS ISO 22309:2006. Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (EDS)
BS ISO 22309:2011. Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
BS ISO 22310:2006. Information and documentation. Guidelines for standards drafters for stating records management requirements in standards
BS ISO 22313:2012. Societal security. Business continuity management systems. Guidance
BS ISO 22314:2006. Plastics. Glass-fibre-reinforced products. Determination of fibre length
BS ISO 22368-1:2004. Crop protection equipment. Test methods for the evaluation of cleaning systemsInternal cleaning of complete sprayers
BS ISO 22368-2:2004. Crop protection equipment. Test methods for the evaluation of cleaning systemsExternal cleaning of sprayers
BS ISO 22368-3:2004. Crop protection equipment. Test methods for the evaluation of cleaning systemsInternal cleaning of tank
BS ISO 22369-1:2006. Crop protection equipment. Drift classification of spraying equipmentClasses
BS ISO 22369-2:2010. Crop protection equipment. Drift classification of spraying equipmentClassification of field crop sprayers by field measurements
BS ISO 22394:2010. Hardmetals. Knoop hardness test
BS ISO 2240:1994. Photography. Colour reversal camera films. Determination of ISO speed
BS ISO 2240:2003. Photography. Colour reversal camera films. Determination of ISO speed
BS ISO 22412:2008. Particle size analysis. Dynamic light scattering (DLS)
BS ISO 22413:2007. Transfer sets for pharmaceutical preparations. Requirements and test methods
BS ISO 22413:2010. Transfer sets for pharmaceutical preparations. Requirements and test methods
BS ISO 22414:2004. Paper. Cut-size office paper. Measurement of edge quality
BS ISO 22472:2006. Ships and marine technology. Guidelines for the installation and operation of voyage data recorders (VDR)
BS ISO 22488:2011. Ships and marine technology. Shipboard fire-fighters' outfits (protective clothing, gloves, boots and helmet)
BS ISO 22489:2006. Microbeam analysis. Electron probe microanalysis. Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy
BS ISO 22493:2008. Microbeam analysis. Scanning electron microscopy. Vocabulary
BS ISO 22498:2005. Plastics. Vinyl chloride homopolymer and copolymer resins. Particle size determination by mechanical sieving
BS ISO 22514-1:2009. Statistical methods in process management. Capability and performanceGeneral principles and concepts
BS ISO 22514-2:2013. Statistical methods in process management. Capability and performanceProcess capability and performance of time-dependent process models
BS ISO 22514-3:2008. Statistical methods in process management. Capability and performanceMachine performance studies for measured data on discrete parts
BS ISO 22514-6:2013. Statistical methods in process management. Capability and performanceProcess capability statistics for characteristics following a multivariate normal distribution
BS ISO 22514-7:2012. Statistical methods in process management. Capability and performanceCapability of measurement processes
BS ISO 22522:2007. Crop protection equipment. Field measurement of spray distribution in tree and bush crops
BS ISO 22538-1:2007. Space systems. Oxygen safetyDesign of oxygen systems and components
BS ISO 22538-2:2007. Space systems. Oxygen safetySelection of metallic materials for oxygen systems and components
BS ISO 22538-5:2010. Space systems. Oxygen safetyOperational and emergency procedures
BS ISO 22538-6:2010. Space systems. Oxygen safetyFacility planning and implementation
BS ISO 2254:2004. Cloves, whole and ground (powdered). Specification
BS ISO 22554:2007. Ships and marine technology. Propeller shaft revolution indicators. Electric type and electronic type
BS ISO 22555:2007. Ships and marine technology. Propeller pitch indicators
BS ISO 226:2003. Acoustics. Normal equal-loudness-level contours
BS ISO 22608:2004. Protective clothing. Protection against liquid chemicals. Measurement of repellency, retention, and penetration of liquid pesticide formulations through protective clothing materials
BS ISO 2261:1994. Reciprocating internal combustion engines. Hand-operated control devices. Standard direction of motion
BS ISO 22621-5:2010. Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar). Polyamide (PA)Fitness for purpose of the system
BS ISO 22621-6:2010. Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar). Polyamide (PA)Code of practice for design, handling and installation
BS ISO 22628:2002. Road vehicles. Recyclability and recoverability. Calculation method
BS ISO 22634:2008. Cigarettes. Determination of benzo[a]pyrene in cigarette mainstream smoke. Method using gas chromatography/mass spectrometry
BS ISO 22641:2005. Space data and information transfer systems. TM (telemetry) synchronization and channel coding
BS ISO 22641:2012. Space data and information transfer systems. TM (telemetry) synchronization and channel coding
BS ISO 22642:2005. Space data and information transfer systems. TC (telecommand) synchronization and channel coding
BS ISO 22643:2003. Space data and information transfer systems. Data entity dictionary specification language (DEDSL). XML/DTD Syntax
BS ISO 22644:2006. Space data and information transfer systems. Orbit data messages
BS ISO 22645:2005. Space data and information transfer systems. TM (telemetry) space data link protocol
BS ISO 22646:2005. Space data and information transfer systems. Space packet protocol
BS ISO 22647:2006. Space data and information transfer systems. Space link identifiers
BS ISO 22647:2010. Space data and information transfer systems. Space link identifiers
BS ISO 22662:2007. Milk and milk products. Determination of lactose content by high-performance liquid chromatography (Reference method)
BS ISO 22663:2006. Space data and information transfer systems. Proximity-1 space link protocol. Data link layer
BS ISO 22663:2007. Space data and information transfer systems. Proximity-1 space link protocol. Data link layer
BS ISO 22664:2005. Space data and information systems. TC (telecommand) space data links protocol
BS ISO 22664:2013. Space data and information transfer systems. TC (telecommand) space datalink protocol
BS ISO 22666:2005. Space data and information transfer systems. AOS (advanced orbiting systems) space data link protocol
BS ISO 22666:2007. Space data and information transfer systems. AOS (advanced orbiting systems) space data link protocol
BS ISO 22667:2005. Space data and information transfer systems. Communications operations procedure-1
BS ISO 22667:2013. Space data and information transfer systems. Communications operation procedure-1
BS ISO 22669:2003. Space data and information transfer systems. Space link extension (SLE). Return-all-frames service
BS ISO 22669:2007. Space data and information transfer systems. Space link extension (SLE). Return-all-frames service
BS ISO 22669:2013. Space data and information transfer systems. Space link extension (SLE). Return-all-frames service
BS ISO 22670:2006. Space data and information transfer systems. Space link extension(SLE). Return-channel-frames service
BS ISO 22670:2013. Space data and information transfer systems. Space link extension (SLE). Return-channel-frames service
BS ISO 22671:2007. Space data and information transfer systems. Space link extension (SLE). Forward communications link transmission unit (CLTU) service
BS ISO 22671:2011. Space data and information transfer systems. Space link extension (SLE). Forward communications link transmission unit (CLTU) service
BS ISO 22672:2006. Space data and information transfer systems. Space link extension (SLE). Forward space packet service
BS ISO 22672:2011. Space data and information transfer systems. Space link extension (SLE). Forward space packet service specification
BS ISO 22673:2008. Ships and marine technology. Launching appliances for free-fall lifeboats
BS ISO 22702:2003+A1:2008. Utility lighters. General consumer-safety requirements
BS ISO 22715:2006. Cosmetics. Packaging and labelling
BS ISO 22716:2007. Cosmetics. Good manufacturing practices (GMP). Guidelines on good manufacturing practices
BS ISO 22734-1:2008. Hydrogen generators using water electrolysis processIndustrial and commercial applications
BS ISO 22734-2:2011. Hydrogen generators using water electrolysis processResidential applications
BS ISO 22742:2005. Packaging. Linear bar code and two-dimensional symbols for product packaging
BS ISO 22742:2010. Packaging. Linear bar code and two-dimensional symbols for product packaging
BS ISO 22754:2008. Pulp and paper. Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement
BS ISO 22762-1:2005. Elastomeric seismic-protection isolatorsTest methods
BS ISO 22762-2:2005. Elastomeric seismic-protection isolatorsApplications for bridges. Specifications
BS ISO 22762-3:2005. Elastomeric seismic-protection isolatorsApplications for buildings. Specifications
BS ISO 22768:2006. Rubber, raw. Determination of the glass transition temperature by differential scanning calorimetry (DSC)
BS ISO 22769:2009. Oil of Australian sandalwood (Santalum spicatum (R.Br.) A.DC.)
BS ISO 22778:2006. Metallic coatings. Physical vapour-deposited coatings of cadmium on iron and steel. Specification and test methods
BS ISO 22779:2006. Metallic coatings. Physical vapour-deposited coatings of aluminium. Specification and test methods
BS ISO 22810:2010. Horology. Water-resistant watches
BS ISO 22826:2005. Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
BS ISO 22837:2009. Vehicle probe data for wide area communications
BS ISO 22839:2013. Intelligent transport systems. Forward vehicle collision mitigation systems. Operation, performance, and verification requirements
BS ISO 22840:2010. Intelligent transport systems. Devices to aid reverse manoeuvres. Extended-range backing aid systems (ERBA)
BS ISO 22846-1:2003. Personal equipment for protection against falls. Rope access systemsFundamental principles for a system of work
BS ISO 22846-2:2012. Personal equipment for protection against falls. Rope access systemsCode of practice
BS ISO 2285:2001. Rubber, vulcanized or thermoplastic. Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
BS ISO 2285:2007. Rubber, vulcanized or thermoplastic. Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
BS ISO 2285:2013. Rubber, vulcanized or thermoplastic. Determination of tension set underconstant elongation, and of tension set, elongation and creep underconstant tensile load
BS ISO 22856:2008. Equipment for crop protection. Methods for the laboratory measurement of spray drift. Wind tunnels
BS ISO 22857:2004. Health informatics. Guidelines on data protection to facilitate trans-border flows of personal health information
BS ISO 22866:2005. Equipment for crop protection. Methods for field measurement of spray drift
BS ISO 22867:2004. Forestry machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles
BS ISO 22877:2004. Castors and wheels. Vocabulary, symbols and multilingual terminology
BS ISO 22889:2007. Metallic materials. Method of test for the determination of resistance to stable crack extension using specimens of low constraint
BS ISO 22889:2013. Metallic materials. Method of test for the determination of resistance to stable crack extension using specimens of low constraint
BS ISO 22891:2007. Paper. Determination of transmittance by diffuse reflectance measurement
BS ISO 22891:2013. Paper. Determination of transmittance by diffuse reflectance measurement
BS ISO 22896:2006. Road vehicles. Deployment and sensor bus for occupant safety systems
BS ISO 22899-1:2007. Determination of the resistance to jet fires of passive fire protection materialsGeneral requirements
BS ISO 22900-1:2008. Road vehicles. Modular vehicle communication interface (MVCI)Hardware design requirements
BS ISO 22900-2:2009. Road vehicles. Modular vehicle communication interface (MVCI)Diagnostic protocol data unit application programming interface (D-PDU API)
BS ISO 22900-3:2009. Road vehicles. Modular vehicle communication interface (MVCI)Diagnostic server application programming interface (D-Server API)
BS ISO 22900-3:2012. Road vehicles. Modular vehicle communication interface (MVCI)Diagnostic server application programming interface (D-Server API)
BS ISO 22901-1:2008. Road vehicles. Open diagnostic data exchange (ODX)Data model specification
BS ISO 22901-2:2011. Road vehicles. Open diagnostic data exchange (ODX)Emissions-related diagnostic data
BS ISO 22902-1:2006. Road vehicles. Automotive multimedia interfaceGeneral technical overview
BS ISO 22902-2:2006. Road vehicles. Automotive multimedia interfaceUse cases
BS ISO 22902-3:2006. Road vehicles. Automotive multimedia interfaceSystem requirements
BS ISO 22902-4:2006. Road vehicles. Automotive multimedia interfaceNetwork protocol requirements for vehicle interface access
BS ISO 22902-5:2006. Road vehicles. Automotive multimedia interfaceCommon message set
BS ISO 22902-6:2006. Road vehicles. Automotive multimedia interfaceVehicle interface requirements
BS ISO 22902-7:2006. Road vehicles. Automotive multimedia interfacePhysical specification
BS ISO 22915-1:2008. Industrial trucks. Verification of stabilityGeneral
BS ISO 22915-10:2008. Industrial trucks. Verification of stabilityAdditional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
BS ISO 22915-11:2011. Industrial trucks. Verification of stabilityIndustrial variable-reach trucks
BS ISO 22915-13:2012. Industrial trucks. Verification of stabilityRough-terrain trucks with mast
BS ISO 22915-14:2010. Industrial trucks. Verification of stabilityRough-terrain variable-reach trucks
BS ISO 22915-15:2013. Industrial trucks. Verification of stabilityCounterbalanced trucks with articulated steering
BS ISO 22915-2:2008. Industrial trucks. Verification of stabilityCounterbalanced trucks with mast
BS ISO 22915-20:2008. Industrial trucks. Verification of stabilityTrucks operating with offset load, offset determined by utilisation. Stability tests
BS ISO 22915-21:2009. Industrial trucks. Verification of stabilityOrder-picking trucks with operator position elevating above 1200mm
BS ISO 22915-3:2008. Industrial trucks. Verification of stabilityReach and straddle trucks
BS ISO 22915-4:2009+A1:2013. Industrial trucks. Verification of stabilityPallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift height
BS ISO 22915-7:2009. Industrial trucks. Verification of stabilityBidirectional and multidirectional trucks
BS ISO 22915-8:2008. Industrial trucks. Verification of stabilityAdditional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated
BS ISO 22917:2004. Superabrasives. Limit deviations and run out tolerances for grinding wheels with diamond or cubic boron nitride
BS ISO 22935-1:2009. Milk and milk products. Sensory analysisGeneral guidance for the recruitment, selection, training and monitoring of assessors
BS ISO 22935-2:2009. Milk and milk products. Sensory analysisRecommended methods for sensory evaluation
BS ISO 22935-3:2009. Milk and milk products. Sensory analysisGuidance on a method for evaluation of compliance with product specifications for sensory properties by scoring
BS ISO 22938:2008. Document management. Electronic content/document management (CDM) data interchange format
BS ISO 22951:2009. Data dictionary and message sets for preemption and prioritization signal systems for emergency and public transport vehicles (PRESTO)
BS ISO 22960:2008. Titanium and titanium alloys. Determination of iron. Molecular absorption spectrometry using 1, 10- phenanthroline
BS ISO 22961:2008. Titanium and titanium alloys. Determination of iron. Atomic absorption spectrometry
BS ISO 22962:2008. Titanium and titanium alloys. Determination of iron. Inductively coupled plasma atomic emission spectrometry
BS ISO 22963:2008. Titanium and titanium alloys. Determination of oxygen. Infrared method after fusion under inert gas
BS ISO 22967:2010. Forced draught gas burners
BS ISO 22968:2010. Forced draught oil burners
BS ISO 22972:2004. Essential oils. Analysis by gas chromatography on chiral capillary columns. General method
BS ISO 22977:2005. Road vehicles. M12 x 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing
BS ISO 23:1993. Cinematography. Camera usage of 35 mm motion picture film. Specifications
BS ISO 230-1:1996. Test code for machine toolsGeometric accuracy of machines operating under no-load or finishing conditions
BS ISO 230-1:2012. Test code for machine toolsGeometric accuracy of machines operating under no-load or quasi-static conditions
BS ISO 230-10:2011. Test code for machine toolsDetermination of the measuring performance of probing systems of numerically controlled machine tools
BS ISO 230-2:1997. Test code for machine toolsDetermination of accuracy and repeatability of positioning of numerically controlled machine tool axes
BS ISO 2302:2005. Isobutene-isoprene rubber (IIR). Evaluation procedures
BS ISO 230-2:2006. Test code for machine tools Determination of accuracy and repeatability of positioning numerically controlled axes
BS ISO 230-3:2001. Test code for machine toolsDetermination of thermal effects
BS ISO 2303:2003. Isoprene rubber (IR). Non-oil-extended, solution-polymerized types. Evaluation procedure
BS ISO 230-3:2007. Test code for machine toolsDetermination of thermal effects
BS ISO 2303:2011. Isoprene rubber (IR). Non-oil-extended, solution-polymerized types Evaluation procedures
BS ISO 23038:2006. Space systems. Space solar cells. Electron and proton irradiation test methods
BS ISO 230-4:1996. Test code for machine toolsCircular tests for numerically controlled machine tools
BS ISO 230-4:2005. Test code for machine toolsCircular tests for numerically controlled machine tools
BS ISO 23041:2007. Space systems. Unmanned spacecraft operational procedures. Documentation
BS ISO 230-5:2000. Test code for machine toolsDetermination of the noise emission
BS ISO 23058:2006. Milk and milk products. Ovine and caprine rennets. Determination of total milk-clotting activity
BS ISO 230-6:2002. Test code for machine toolsDetermination of positioning accuracy on body and face diagonals (Diagonal displacement tests)
BS ISO 23065:2009. Milk fat from enriched dairy products. Determination of omega-3 and omega-6 fatty acid content by gas-liquid chromatography
BS ISO 230-7:2006. Test code for machine toolsGeometric accuracy of axes of rotation
BS ISO 23079:2005. Magnesium and magnesium alloys. Returns. Requirements, classification and acceptance
BS ISO 23081-1:2006. Information and documentation. Records management processes. Metadata for recordsPrinciples
BS ISO 23081-2:2009. Information and documentation. Managing metadata for recordsConceptual and implementation issues
BS ISO 2314:2009. Gas turbines. Acceptance tests
BS ISO 23145-1:2007. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powdersTap density
BS ISO 23145-2:2012. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powdersUntapped density
BS ISO 23160:2011. Watch cases and accessories. Tests of the resistance to wear, scratching and impacts
BS ISO 23161:2009. Soil quality. Determination of selected organotin compounds. Gas-chromatographic method
BS ISO 23181:2007. Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using high viscosity fluid
BS ISO 23185:2009. Assessment and benchmarking of terminological resources. General concepts, principles and requirements
BS ISO 23202:2006. Aluminium oxide used for the production of aluminium. Determination of particles passing a 20 micrometre aperture sieve
BS ISO 23205:2006. Agricultural tractors. Instructional seat
BS ISO 23206:2005. Agricultural wheeled tractors and attachments. Front loaders. Carriages for attachments
BS ISO 2322:2009. Styrene-butadiene rubber (SBR). Emulsion- and solution-polymerized types. Evaluation procedures
BS ISO 23228:2011. Thermoplastics pipes for the conveyance of fluids. Determination of the stress-rupture resistance of moulding materials using plain strain grooved tensile (PSGT) specimens
BS ISO 23232:2009. Textiles. Aqueous liquid repellency. Water/alcohol solution resistance test
BS ISO 23269-1:2008. Ships and marine technology. Breathing apparatus for shipsEmergency escape breathing devices (EEBD) for shipboard use
BS ISO 23269-2:2012. Ships and marine technology. Breathing apparatus for ships Self-contained breathing apparatus for shipboard firefighters
BS ISO 23269-3:2011. Ships and marine technology. Breathing apparatus for shipsSelf-contained breathing apparatus (safety equipment) required by the IMO IBC and IGC Codes
BS ISO 23273:2013. Fuel cell road vehicles. Safety specifications. Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen
BS ISO 23273-1:2006. Fuel cell road vehicles. Safety specificationsVehicle functional safety
BS ISO 23273-2:2006. Fuel cell road vehicles. Safety specificationsProtection against hydrogen hazards for vehicles fuelled with compressed hydrogen
BS ISO 23273-3:2006. Fuel cell road vehicles. Safety specificationsProtection of persons against electric shock
BS ISO 23274:2007. Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements. Non-externally chargeable vehicles
BS ISO 23274-1:2013. Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurementsNon-externally chargeable vehicles
BS ISO 23274-2:2012. Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurementsExternally chargeable vehicles
BS ISO 2328:1993. Fork lift trucks. Hook-on type fork arms and fork arm carriages. Mounting dimensions
BS ISO 2328:2007. Fork-lift trucks. Hook-on type fork arms and fork arm carriages. Mounting dimensions
BS ISO 2328:2011. Fork-lift trucks. Hook-on type fork arms and fork arm carriages. Mounting dimensions
BS ISO 23297:2008. Thermoplastics hoses and hose assemblies. Wire or synthetic yarn reinforced single-pressure types for hydraulic applications. Specification
BS ISO 2330:1995. Fork-lift trucks. Fork arms. Technical characteristics and testing
BS ISO 2330:2002. Fork-lift trucks. Fork arms. Technical characteristics and testing
BS ISO 23309:2007. Hydraulic fluid power systems. Assembled systems. Methods of cleaning lines by flushing
BS ISO 23317:2007. Implants for surgery. In vitro evaluation for apatite-forming ability of implant materials
BS ISO 23317:2012. Implants for surgery. In vitro evaluation for apatite-forming ability of implant materials
BS ISO 2332:2009. Agricultural tractors and machinery. Connection of implements via three-point linkage. Clearance zone around implement
BS ISO 23339:2010. Space systems. Unmanned spacecraft. Estimating the mass of remaining usable propellant
BS ISO 23380:2008. Selection methods for the determination of trace elements in coal
BS ISO 23380:2013. Selection of methods for the determination of trace elements in coal
BS ISO 23409:2011. Male condoms. Requirements and test methods for condoms made from synthetic materials
BS ISO 2344:1998. Road vehicles. M14 x 1,25 spark plugs with conical seating and their cylinder head housings
BS ISO 2346:2001. Road vehicles. M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing
BS ISO 23460:2011. Space projects. Programme management. Dependability assurance requirements
BS ISO 23461:2010. Space systems. Programme management. Non-conformance control system
BS ISO 23480:2008. Tools for pressing. Sliding plates
BS ISO 23480:2013. Tools for pressing. Sliding plates
BS ISO 23481:2008. Tools for pressing. Cam driver plates
BS ISO 23499:2008. Coal. Determination of bulk density
BS ISO 23499:2013. Coal. Determination of bulk density for the use in charging of coke ovens
BS ISO 23500:2011. Guidance for the preparation and quality management of fluids for haemodialysis and related therapies
BS ISO 23509:2006. Bevel and hypoid gear geometry
BS ISO 2351-1:2002. Assembly tools for screws and nuts. Machine-operated screwdriver bitsScrewdriver bits for slotted head screws
BS ISO 2351-1:2007. Assembly tools for screws and nuts. Machine-operated screwdriver bitsScrewdriver bits for slotted head screws
BS ISO 2351-2:2002. Assembly tools for screws and nuts. Machine-operated screwdriver bitsScrewdriver bits for cross-recessed head screws
BS ISO 2351-3:2002. Assembly tools for screws and nuts. Machine-operated screwdriver bitsScrewdriver bits for hexagon socket screws
BS ISO 23519:2010. Sintered metal materials, excluding hardmetals. Measurement of surface roughness
BS ISO 23529:2004. Rubber. General procedures for preparing and conditioning test pieces for physical test methods
BS ISO 23529:2010. Rubber. General procedures for preparing and conditioning test pieces for physical test methods
BS ISO 23539:2005. Photometry. The CIE system of physical photometry
BS ISO 23559:2007. Plastics. Film and sheeting. Guidance on the testing of thermoplastic films
BS ISO 23559:2011. Plastics. Film and sheeting. Guidance on the testing of thermoplastic films
BS ISO 23584-1:2009. Optics and photonics. Specification of reference dictionaryGeneral overview on organization and structure
BS ISO 23584-2:2012. Optics and photonics. Specification of reference dictionaryClasses’ and properties’ definitions
BS ISO 23600:2007. Assistive products for persons with vision impairments and persons with vision and hearing impairments. Acoustic and tactile signals for pedestrian traffic lights
BS ISO 23601:2009. Safety identification. Escape and evacuation plan signs
BS ISO 23603:2005. Standard method of assessing the spectral quality of daylight simulators for visual appraisal and measurement of colour
BS ISO 236-2:2013. ReamersLong fluted machine reamers with Morse taper shanks
BS ISO 23671:2006. Passenger car tyres. Method for measuring relative wet grip performance. Loaded new tyres
BS ISO 23713:2005. Pulps. Determination of fibre coarseness by automated optical analysis. Polarized light method
BS ISO 23714:2007. Pulps. Determination of water retention value (WRV)
BS ISO 23717:2006. Steel wire and wire products. Hose reinforcement wire
BS ISO 23718:2007. Metallic materials. Mechanical testing. Vocabulary
BS ISO 23788:2012. Metallic materials. Verification of the alignment of fatigue testing machines
BS ISO 23794:2003. Rubber, vulcanized or thermoplastic. Abrasion testing. Guidance
BS ISO 23794:2010. Rubber, vulcanized or thermoplastic. Abrasion testing. Guidance
BS ISO 23812:2009. Surface chemical analysis. Secondary-ion mass spectrometry. Method for depth calibration for silicon using multiple delta-layer reference materials
BS ISO 2382-1:1984. Data processing. Vocabulary.Fundamental terms
BS ISO 2382-10:1979. Data processing. Vocabulary.Operating techniques and facilities
BS ISO 2382-11:1987. Information technology. VocabularyProcessing units
BS ISO 2382-12:1988. Information processing systems. Vocabulary.Peripheral equipment
BS ISO 2382-13:1984. Data processing vocabulary.Computer graphics
BS ISO 2382-14:1978. Information technology. VocabularyReliability, maintenance and availability
BS ISO 2382-15:1985. Data processing. Vocabulary.Programming languages
BS ISO 2382-16:1978. Information technology. VocabularyInformation theory
BS ISO 2382-18:1987. Information processing systems. Vocabulary.Distributed data processing
BS ISO 2382-19:1989. Information processing systems. Vocabulary.Analog computing
BS ISO 2382-2:1976. Data processing. Vocabulary.Arithmetic and logic operations
BS ISO 2382-21:1985. Data processing. Vocabulary.Interfaces between process computer systems and technical processes
BS ISO 2382-22:1986. Information processing systems. Vocabulary.Calculators
BS ISO 2382-3:1987. Information processing systems. VocabularyEquipment technology
BS ISO 2382-4:1987. Information processing systems. Vocabulary.Organization of data
BS ISO 2382-5:1989. Information processing systems. Vocabulary.Representation of data
BS ISO 2382-6:1987. Information processing systems. Vocabulary.Preparation and handling of data
BS ISO 2382-8:1986. Information technology. VocabularyControl, integrity and security
BS ISO 23828:2008. Fuel cell road vehicles. Energy consumption measurement. Vehicles fuelled with compressed hydrogen
BS ISO 2382-9:1984. Information technology. VocabularyData communication
BS ISO 23830:2008. Surface chemical analysis. Secondary-ion mass spectrometry. Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
BS ISO 23833:2006. Microbeam analysis. Electron probe microanalysis (EPMA). Vocabulary
BS ISO 23833:2013. Microbeam analysis. Electron probe microanalysis (EPMA). Vocabulary
BS ISO 23848-1:2009. Machine tools. Ball splinesGeneral characteristics and requirements
BS ISO 23848-2:2009. Machine tools. Ball splinesDynamic and static load ratings and rating life
BS ISO 2385:1993. Corkwood in planks, virgin cork, cleanings, cork pieces, corkwood refuse and corkwaste. Sampling to determine moisture content
BS ISO 23853:2004. Cranes. Training of slingers and signallers
BS ISO 23868:2008. Document management. Monitoring and verification of information stored on 130mm optical media
BS ISO 23873:2010. Hard coal. Method for the measurement of the swelling of hard coal using a dilatometer
BS ISO 23874:2006. Natural gas. Gas chromatographic requirements for hydrocarbon dewpoint calculation
BS ISO 23893-1:2007. Water quality. Biochemical and physiological measurements on fishSampling of fish, handling and preservation of samples
BS ISO 23893-3:2013. Water quality. Biochemical and physiological measurements on fishDetermination of vitellogenin
BS ISO 23909:2008. Soil quality. Preparation of laboratory samples from large samples
BS ISO 2393:2008. Rubber test mixes. Preparation, mixing and vulcanization. Equipment and procedures
BS ISO 23932:2009. Fire safety engineering. General principles
BS ISO 23933:2006. Aerospace series. Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135°C/20 684 kPa (275°F/3 000 psi) and 135°C/21 000 kPa (275°F/3 046 psi). Procurement specification
BS ISO 23935:2006. Aircraft. Environmental test procedures for airborne fluid system components. Resistance to fire in designated fire zones
BS ISO 23954:2009. Oil of lime expressed, Persian type (Citrus latifolia Tanaka)
BS ISO 24033:2009. Polyethylene of raised temperature resistance (PE-RT) pipes. Effect of time and temperature on the expected strength
BS ISO 2407:1997. Test conditions for internal cylindrical grinding machines with horizontal spindle. Testing of accuracy
BS ISO 24095:2009. Workplace air. Guidance for the measurement of respirable crystalline silica
BS ISO 24097-1:2009. Intelligent transport systems. Using web services (machine-machine delivery) for ITS service deliveryRealization of interoperable web services
BS ISO 24099:2011. Navigation data delivery structures and protocols
BS ISO 24100:2010. Intelligent transport systems. Basic principles for personal data protection in probe vehicle information services
BS ISO 24101-1:2008. Intelligent transport systems. Communications access for land mobiles (CALM). Application managementGeneral requirements
BS ISO 24101-2:2010. Intelligent transport systems. Communications access for land mobiles (CALM). Application managementConformance test
BS ISO 24102:2010. Intelligent transport systems. Communications access for land mobiles (CALM). Management
BS ISO 24102-1:2013. Intelligent transport systems. Communications access for land mobiles (CALM). ITS station managementLocal management
BS ISO 24102-3:2013. Intelligent transport systems. Communications access for land mobiles (CALM). ITS station managementService access points
BS ISO 24102-4:2013. Intelligent transport systems. Communications access for land mobiles (CALM). ITS station managementStation-internal management communications
BS ISO 24102-5:2013. Intelligent transport systems. Communications access for land mobiles (CALM). ITS station managementFast service advertisement protocol (FSAP)
BS ISO 24103:2009. Intelligent transport systems. Communications access for land mobiles (CALM). Media adapted interface layer (MAIL)
BS ISO 24113:2011. Space systems. Space debris mitigation requirements
BS ISO 24114:2011. Instant coffee. Criteria for authenticity
BS ISO 24115:2012. Green coffee. Procedure for calibration of moisture meters. Routine method
BS ISO 24134:2006. Industrial trucks. Additional requirements for automated functions on trucks
BS ISO 24153:2009. Random sampling and randomization procedures
BS ISO 24173:2009. Microbeam analysis. Guidelines for orientation measurement using electron backscatter diffraction
BS ISO 2421:2003. Coated abrasives. Cylindrical sleeves
BS ISO 24213:2008. Metallic materials. Sheet and strip. Method for springback evaluation in stretch bending
BS ISO 24233:2008. Tools for moulding. Tool specification sheet for diecasting dies
BS ISO 24236:2005. Surface chemical analysis. Auger electron spectroscopy. Repeatability and constancy of intensity scale
BS ISO 24237:2005. Surface chemical analysis. X-ray photoelectron spectroscopy. Repeatability and constancy of intensity scale
BS ISO 2424:2007. Textile floor coverings. Vocabulary
BS ISO 2425:1999+A1:2003. Measurement of liquid flow in open channels under tidal conditions
BS ISO 2425:2010. Hydrometry. Measurement of liquid flow in open channels under tidal conditions
BS ISO 24254:2007. Lubricants, industrial oils and related products (class L). Family E (internal combustion engine oils). Specifications for oils for use in four-stroke cycle motorcycle gasoline engines and associated drivetrains (categories EMA and EMB)
BS ISO 24293:2009. Water quality. Determination of individual isomers of nonylphenol. Method using solid phase extraction (SPE) and gas chromatography/mass spectrometry (GC/MS)
BS ISO 24334:2006. Laminate floor coverings. Determination of locking strength for mechanically assembled panels
BS ISO 24335:2006. Laminate floor coverings. Determination of impact resistance
BS ISO 24336:2005. Laminate floor coverings. Determination of thickness swelling after partial immersion in water
BS ISO 24337:2006. Laminate floor coverings. Determination of geometrical characteristics
BS ISO 24338:2006. Laminate floor coverings. Determination of abrasion resistance
BS ISO 24339:2006. Laminate and textile floor coverings. Determination of dimensional variations after exposure to humid and dry climate conditions
BS ISO 24341:2006. Resilient and textile floor coverings. Determination of length, width and straightness of sheet
BS ISO 24342:2006. Resilient floor-covering tiles. Determination of side length, edge straightness and squareness
BS ISO 24345:2006. Resilient floor coverings. Determination of peel resistance
BS ISO 24346:2006. Resilient floor coverings. Determination of overall thickness
BS ISO 24347:2005. Agricultural vehicles. Mechanical connections between towed and towing vehicles. Dimensions of ball-type coupling device (80 mm)
BS ISO 24393:2008. Rolling bearings. Linear motion rolling bearings. Vocabulary
BS ISO 24394:2008+A1:2012. Welding for aerospace applications. Qualification test for welders and welding operators. Fusion welding of metallic components
BS ISO 24408:2005. Ships and marine technology. Position-indicating lights for life-saving appliances. Testing, inspection, and marking of production units
BS ISO 24409-1:2010. Ships and marine technology. Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markingsDesign principles
BS ISO 24415-2:2011. Tips for assistive products for walking. Requirements and test methodsDurability of tips for crutches
BS ISO 24431:2006. Gas cylinders. Cylinders for compressed and liquefied gases (excluding acetylene). Inspection at the time of filling
BS ISO 24453:2008. Rubber. Acquisition and presentation of comparable single-point data
BS ISO 24454:2008. Rubber. Acquisition and presentation of comparable multi-point data
BS ISO 2446:2008. Milk. Determination of fat content
BS ISO 24497-1:2007. Non-destructive testing. Metal magnetic memoryVocabulary
BS ISO 24497-2:2007. Non-destructive testing. Metal magnetic memoryGeneral requirements
BS ISO 24497-3:2007. Non-destructive testing. Metal magnetic memoryInspection of welded joints
BS ISO 24510:2007. Activities relating to drinking water and wastewater services. Guidelines for the assessment and for the improvement of the service to users
BS ISO 24511:2007. Activities relating to drinking water and wastewater services. Guidelines for the management of wastewater utilities and for the assessment of wastewater services
BS ISO 24512:2007. Activities relating to drinking water and wastewater services. Guidelines for the management of drinking water utilities and for the assessment of drinking water services
BS ISO 24517-1:2008. Document management. Engineering document format using PDFUse of PDF 1.6 (PDF/E-1)
BS ISO 24531:2007. Intelligent transport systems. System architecture, taxonomy and terminology. Using XML in ITS standards, data registries and data dictionaries
BS ISO 24531:2013. Intelligent transport systems. System architecture, taxonomy and terminology. Using XML in ITS standards, data registries and data dictionaries
BS ISO 24534-5:2011. Intelligent transport systems. Automatic vehicle and equipment identification. Electronic Registration Identification (ERI) for vehiclesSecure communications using symmetrical techniques
BS ISO 24535:2007. Intelligent transport systems. Automatic vehicle identification. Basic electronic registration identification (Basic ERI)
BS ISO 24537:2007. Micrographics. Dimensions for reels used for 16 mm and 35 mm microfilm
BS ISO 24538:2008. Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder
BS ISO 24557:2009. Pulses. Determination of moisture content. Air-oven method
BS ISO 246:1995. Rolling bearings. Cylindrical roller bearings, separate thrust collars. Boundary dimensions
BS ISO 246:2007. Rolling bearings. Cylindrical roller bearings, separate thrust collars. Boundary dimensions
BS ISO 24610-1:2006. Language resource management. Feature structuresFeature structure representation
BS ISO 24610-2:2011. Language resource management. Feature structuresFeature system declaration
BS ISO 24611:2012. Language resource management. Morpho-syntactic annotation framework (MAF)
BS ISO 24612:2012. Language resource management. Linguistic annotation framework (LAF)
BS ISO 24613:2008. Language resource management. Lexical markup framework (LMF)
BS ISO 24614-1:2010. Language resource management. Word segmentation of written textsBasic concepts and general principles
BS ISO 24614-2:2011. Language resource management. Word segmentation of written textsWord segmentation for Chinese, Japanese and Korean
BS ISO 24615:2010. Language resource management. Syntactic annotation framework (SynAF)
BS ISO 24616:2012. Language resources management. Multilingual information framework
BS ISO 24617-1:2012. Language resource management. Semantic annotation framework (SemAF)Time and events (SemAF-Time, ISO-TimeML)
BS ISO 24617-2:2012. Language resource management. Semantic annotation framework (SemAF)Dialogue acts
BS ISO 24619:2011. Language resource management. Persistent identification and sustainable access (PISA)
BS ISO 24631-1:2009. Radiofrequency identification of animalsEvaluation of conformance of RFID transponders with ISO 11784 and ISO 11785 (including granting and use of a manufacturer code)
BS ISO 24631-2:2009. Radiofrequency identification of animals Evaluation of conformance of RFID transceivers with ISO 11784 and ISO 11785
BS ISO 24631-3:2009. Radiofrequency identification of animalsEvaluation of performance of RFID transponders conforming with ISO 11784 and ISO 11785
BS ISO 24631-4:2009. Radiofrequency identification of animalsEvaluation of performance of RFID transceivers conforming with ISO 11784 and ISO 11785
BS ISO 24631-6:2011. Radiofrequency identification of animalsRepresentation of animal identification information (visual display/data transfer)
BS ISO 24631-7:2012. Radiofrequency identification of animalsSynchronization of ISO 11785 identification systems
BS ISO 24637:2009. Space systems. Electromagnetic interference (EMI) test reporting requirements
BS ISO 24638:2008. Space systems. Pressure components and pressure system integration
BS ISO 2467:2004. Cinematography. Image area produced by 65 mm/5 perforation motion-picture camera aperture and maximum projectable image area on 70 mm/5 perforation motion-picture prints. Positions and dimensions
BS ISO 2469:2007. Paper, board and pulps. Measurement of diffuse radiance factor
BS ISO 24698-1:2008. Rubber, raw. Determination of bound Acrylonitrile content in acrylonitrile-butadiene rubber (NBR)Combustion (Dumas) method
BS ISO 24698-2:2008. Rubber, raw. Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR)Kjeldahl method
BS ISO 247:2006. Rubber. Determination of ash
BS ISO 2470:1999. Paper, board and pulps. Measurement of diffuse blue reflectance factor (ISO brightness)
BS ISO 2470-1:2009. Paper, board and pulps. Measurement of diffuse blue reflectance factorIndoor daylight conditions (ISO brightness)
BS ISO 2470-2:2008. Paper, board and pulps. Measurement of diffuse blue reflectance factorOutdoor daylight conditions (D65 brightness)
BS ISO 2471:1998. Paper and board. Determination of opacity (paper backing). Diffuse reflectance method
BS ISO 2471:2008. Paper and board. Determination of opacity (paper backing). Diffuse reflectance method
BS ISO 2475:1999. Chloroprene rubber (CR). General-purpose types. Evaluation procedure
BS ISO 2475:2011. Chloroprene rubber (CR). General-purpose types. Evaluation procedure
BS ISO 2476:2009. Butadiene rubber (BR).Solution-polymerized types. Evaluation procedures
BS ISO 248:2005. Rubber, raw. Determination of volatile-matter content
BS ISO 248-1:2011. Rubber, raw. Determination of volatile-matter contentHot-mill method and oven method
BS ISO 248-2:2012. Rubber, raw. Determination of volatile-matter contentThermogravimetric methods using an automatic analyser with an infrared drying unit
BS ISO 2490:2007. Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module. Nominal dimensions
BS ISO 24917:2010. Space systems. General test requirements for launch vehicles
BS ISO 2493-1:2010. Paper and board. Determination of bending resistanceConstant rate of deflection
BS ISO 2493-2:2011. Paper and board. Determination of bending resistanceTaber-type tester
BS ISO 25:1994. Cinematography. Camera usage of 16 mm motion picture film specification
BS ISO 251:2003. Conveyor belts with textile carcass. Widths and lengths
BS ISO 251:2012. Conveyor belts with textile carcass. Widths and lengths
BS ISO 25101:2009. Water quality. Determination of perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA). Method for unfiltered samples using solid phase extraction and liquid chromatography/mass spectrometry
BS ISO 25111:2009. Intelligent transport systems. Communications access for land mobiles (CALM). General requirements for using public networks
BS ISO 25112:2010. Intelligent transport systems. Communications access for land mobiles (CALM). Mobile wireless broadband using IEEE 802.16
BS ISO 25113:2010. Intelligent transport systems. Communications access for land mobiles (CALM). Mobile wireless broadband using HC-SDMA
BS ISO 25119-1:2010. Tractors and machinery for agriculture and forestry. Safety-related parts of control systems.General principles for design and development
BS ISO 25119-2:2010. Tractors and machinery for agriculture and forestry. Safety-related parts of control systemsConcept phase
BS ISO 25119-3:2010. Tractors and machinery for agriculture and forestry. Safety-related parts of control systemsSeries development, hardware and software
BS ISO 25119-4:2010. Tractors and machinery for agriculture and forestry. Safety-related parts of control systemsProduction, operation, modification and supporting processes
BS ISO 25137-1:2009. Plastics. Sulfone polymer moulding and extrusion materialsDesignation system and basis for specifications
BS ISO 25137-2:2009. Plastics. Sulfone polymer moulding and extrusion materialsPreparation of test specimens and determination of properties
BS ISO 25157:2013. Essential oil of rose, Chinese Kushui type (Rosa sertata × Rosa rugosa)
BS ISO 25179:2010. Adhesives. Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives
BS ISO 25217:2009. Adhesives. Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens
BS ISO 25297-1:2010. Optics and photonics. Electronic exchange of optical dataNODIF information model
BS ISO 25297-1:2012. Optics and photonics. Electronic exchange of optical dataNODIF information model
BS ISO 25297-2:2011. Optics and photonics. Electronic exchange of optical dataMapping to the classes and properties defined in ISO 23584
BS ISO 2531:2009. Ductile iron pipes, fittings, accessories and their joints for water applications
BS ISO 2534:1998. Road vehicles. Engine test code. Gross power
BS ISO 2537:2007. Hydrometry. Rotating-element current-meters
BS ISO 254:1998. Belt drives. Pulleys. Quality, finish and balance
BS ISO 254:2011. Belt drives. Pulleys. Quality, finish and balance
BS ISO 25498:2010. Microbeam analysis. Analytical electron microscopy. Selected-area electron diffraction analysis using a transmission electron microscope
BS ISO 25518:2009. Single-use rubber gloves for general applications. Specification
BS ISO 25577:2008. Information and documentation. MarcXchange
BS ISO 2558:2010. Textile glass chopped-strand mats for reinforcement of plastics. Determination of time of dissolution of the binder in styrene
BS ISO 2559:2000. Textile glass. Mats (made from chopped or continuous strands). Designation and basis for specifications
BS ISO 2559:2011. Textile glass. Mats (made from chopped or continuous strands). Designation and basis for specifications
BS ISO 2561:2006. Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS ISO 2561:2012. Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PSI) by gas chromatography
BS ISO 25620:2008. Laminate floor coverings. Determination of long-side friction for mechanically assembled panels
BS ISO 2563:2009. Aircraft ducting and piping. Profile dimensions for flanges of V-band couplings
BS ISO 25639-1:2008. Exhibitions, shows, fairs and conventionsVocabulary
BS ISO 25639-2:2008. Exhibitions, shows, fairs and conventionsMeasurement procedures for statistical purposes
BS ISO 257:2004. Pesticides and other agrochemicals. Principles for the selection of common names
BS ISO 25720:2009. Health informatics. Genomic sequence variation markup language (GSVML)
BS ISO 2575:2000. Road vehicles. Symbols for controls, indicators and tell-tales
BS ISO 2575:2004+A4:2009. Road vehicles. Symbols for controls, indicators and tell-tales
BS ISO 2575:2010+A1:2011. Road vehicles. Symbols for controls, indicators and tell-tales CD-ROM
BS ISO 25760:2009. Gas cylinders. Operational procedures for the safe removal of valves from gas cylinders
BS ISO 25761:2008. Plastics. Polyols for use in the production of polyurethanes. Determination of basicity (total amine value), expressed as percent nitrogen
BS ISO 25780:2011. Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin. Pipes with flexible joints intended to be installed using jacking techniques
BS ISO 2580-1:1990. Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materialsDesignation
BS ISO 25861:2007. Ships and marine technology. Navigation. Daylight signalling lamps
BS ISO 2596:1994. Iron ores. Determination of hygroscopic moisture in analytical samples. Gravimetric and Karl Fischer methods
BS ISO 2596:2006. Iron ores. Determination of hygroscopic moisture in analytical samples. Gravimetric, Karl Fischer and mass-loss methods
BS ISO 25964-1:2011. Information and documentation. Thesauri and interoperability with other vocabulariesThesauri for information retrieval
BS ISO 25964-2:2013. Information and documentation. Thesauri and interoperability with othervocabulariesInteroperability with other vocabularies
BS ISO 2597-1:1994. Iron ores.Determination of total iron contentTitrimetric method after tin (II) chloride reduction
BS ISO 2597-1:2006. Iron ores. Determination of total iron contentTitrimetric method after tin (II) chloride reduction
BS ISO 2597-2:2008. Iron ores. Determination of total iron contentTitrimetric methods after titanium(III) chloride reduction
BS ISO 25981:2008. Road vehicles. Connectors for the electrical connection of towing and towed vehicles. Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage
BS ISO 2599:2003. Iron ores. Determination of phosphorus content. Titrimetric method
BS ISO 26:1993. Cinematography. Projector usage of 16 mm motion-picture films for direct front projection. Specifications
BS ISO 26000:2010. Guidance on social responsibility
BS ISO 26021-1:2008. Road vehicles. End-of-life activation of on-board pyrotechnic devicesGeneral information and use case definitions
BS ISO 26021-2:2008. Road vehicles. End of-life activation of on-board pyrotechnic devicesCommunication requirements
BS ISO 26021-3:2009. Road vehicles. End-of-life activation of on-board pyrotechnic devicesTool requirements
BS ISO 26021-4:2009. Road vehicles. End-of-life activation of on-board pyrotechnic devicesAdditional communication line with bidirectional communication
BS ISO 26021-5:2009. Road vehicles. End-of-life activation of on-board pyrotechnic devicesAdditional communication line with pulse width modulated signal
BS ISO 26022:2010. Road vehicles. Ergonomic aspects of transport information and control systems. Simulated lane change test to assess in-vehicle secondary task demand
BS ISO 26062:2010. Nuclear technology. Nuclear fuels. Procedures for the measurement of elemental impurities in uranium- and plutonium-based materials by inductively coupled plasma mass spectrometry
BS ISO 261:1998. ISO general purpose metric screw threads. General plan
BS ISO 26101:2012. Acoustics. Test methods for the qualification of free-field environments
BS ISO 26142:2010. Hydrogen detection apparatus. Stationary applications
BS ISO 26143:2007. Space data and information transfer systems. Space link extension (SLE). Return operational control fields service
BS ISO 26143:2013. Space data and information transfer systems. Space link extension (SLE). Return operational control fields service
BS ISO 26146:2012. Corrosion of metals and alloys. Method for metallographic examination of samples after exposure to high-temperature corrosive environments
BS ISO 26162:2012. Systems to manage terminology, knowledge and content. Design, implementation and maintenance of terminology management systems
BS ISO 262:1998. ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts
BS ISO 26243:2007. Cards for staple fibres spinning. Vocabulary and principles of construction
BS ISO 26262-1:2011. Road vehicles. Functional safetyVocabulary
BS ISO 26262-10:2012. Road vehicles. Functional safetyGuideline on ISO 26262
BS ISO 26262-2:2011. Road vehicles. Functional safetyManagement of functional safety
BS ISO 26262-3:2011. Road vehicles. Functional safetyConcept phase
BS ISO 26262-4:2011. Road vehicles. Functional safetyProduct development at the system level
BS ISO 26262-5:2011. Road vehicles. Functional safetyProduct development at the hardware level
BS ISO 26262-6:2011. Road vehicles. Functional safetyProduct development at the software level
BS ISO 26262-7:2011. Road vehicles. Functional safetyProduction and operation
BS ISO 26262-8:2011. Road vehicles. Functional safetySupporting processes
BS ISO 26262-9:2011. Road vehicles. Functional safetyAutomotive safety integrity level (ASIL)-oriented and safety-oriented analyses
BS ISO 26303:2012. Machine tools. Short-term capability evaluation of machining processes on metal-cutting machine tools
BS ISO 2631-1:1997. Mechanical vibration and shock. Evaluation of human exposure to whole-body vibrationGeneral Requirements
BS ISO 2631-4:2001+A1:2010. Mechanical vibration and shock. Evaluation of human exposure to whole-body vibrationGuidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems
BS ISO 26322-1:2008. Tractors for agriculture and forestry. SafetyStandard tractors
BS ISO 26322-2:2010. Tractors for agriculture and forestry. SafetyNarrow-track and small tractors
BS ISO 26323:2009. Milk products. Determination of the acidification activity of dairy cultures by continuous pH measurement (CpH)
BS ISO 26324:2012. Information and documentation. Digital object identifier system
BS ISO 2635:2003. Aircraft. Conductors for general purpose aircraft electrical cables and aerospace applications. Dimensions and characteristics
BS ISO 26362:2009. Access panels in market, opinion and social research. Vocabulary and service requirements
BS ISO 26367-1:2011. Guidelines for assessing the adverse environmental impact of fire effluentsGeneral
BS ISO 26382:2010. Cogeneration systems. Technical declarations for planning, evaluation and procurement
BS ISO 26402:2008. Agricultural vehicles. Steering systems for agricultural trailers. Interface for articulated steering device of semi-mounted trailers
BS ISO 26423:2009. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of coating thickness by crater-grinding method
BS ISO 26424:2008. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of the abrasion resistance of coatings by a micro-scale abrasion test
BS ISO 26428-1:2008. Digital cinema (D-cinema) distribution masterImage characteristics
BS ISO 26428-11:2011. Digital cinema (D-cinema) distribution masterAdditional frame rates
BS ISO 26428-19:2011. Digital cinema (D-cinema) distribution masterSerial digital interface signal formatting for additional frame rates level AFR2 and level AFR4
BS ISO 26428-2:2008. Digital cinema (D-cinema) distribution masterAudio characteristics
BS ISO 26428-3:2008. Digital cinema (D-cinema) distribution masterAudio channel mapping and channel labeling
BS ISO 26428-9:2009. Digital cinema (D-cinema) distribution masterImage pixel structure level 3. Serial digital interface signal formatting
BS ISO 26429-10:2009. Digital cinema (D-cinema) packagingStereoscopic picture track file
BS ISO 26429-3:2008. Digital cinema (D-cinema) packagingSound and picture track file
BS ISO 26429-4:2008. Digital cinema (D-cinema) packagingMXF JPEG 2000 application
BS ISO 26429-6:2008. Digital cinema (D-cinema) packagingMXF track file essence encryption
BS ISO 26429-7:2008. Digital cinema (D-cinema) packagingComposition playlist
BS ISO 26429-8:2009. Digital cinema (D-cinema) packagingPacking list
BS ISO 26429-9:2009. Digital cinema (D-cinema) packagingAsset mapping and file segmentation
BS ISO 26430-1:2008. Digital cinema (D-cinema) operationsKey delivery message
BS ISO 26430-2:2008. Digital cinema (D-cinema) operationsDigital certificate
BS ISO 26430-3:2008. Digital cinema (D-cinema) operationsGeneric extra-theatre message format
BS ISO 26430-4:2009. Digital cinema (D-cinema) operationsLog record format specification
BS ISO 26430-5:2009. Digital cinema (D-cinema) operationsSecurity log event class and constraints (CD-ROM)
BS ISO 26430-6:2009. Digital cinema (D-cinema) operationsAuditorium security messages for intra-theater communications
BS ISO 26430-9:2009. Digital cinema (D-cinema) operationsKey delivery bundle
BS ISO 26431-1:2008. Digital cinema (D-cinema) qualityScreen luminance level, chromaticity and uniformity
BS ISO 26432-2:2008. Digital source processingDigital cinema (D-cinema) low frequency effects (LFE) channel audio characteristics
BS ISO 26433:2009. Digital cinema (D-cinema). XML Data types
BS ISO 26443:2008. Fine ceramics (advanced ceramics, advanced technical ceramics). Rockwell indentation test for evaluation of adhesion of ceramic coatings
BS ISO 26462:2010. Milk. Determination of lactose content. Enzymatic method using difference in pH
BS ISO 26482:2010. Hardmetals. Determination of lead and cadmium content
BS ISO 26602:2009. Fine ceramics (advanced ceramics, advanced technical ceramics). Silicon nitride materials for rolling bearing balls
BS ISO 26603:2008. Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of total chlorine
BS ISO 26622-1:2008. Modular taper interface with ball track systemDimensions and designation of shanks
BS ISO 26622-2:2008. Modular taper interface with ball track systemDimensions and designation of receivers
BS ISO 26623-1:2008. Polygonal taper interface with flange contact surfaceDimensions and designation of shanks
BS ISO 26623-2:2008. Polygonal taper interface with flange contact surfaceDimensions and designation of receivers
BS ISO 26642:2010. Food products. Determination of the glycaemic index (GI) and recommendation for food classification
BS ISO 26683-1:2013. Intelligent transport systems. Freight land conveyance content identification and communicationContext, architecture and referenced standards
BS ISO 26683-2:2013. Intelligent transport systems. Freight land conveyance content identification and communicationApplication interface profiles
BS ISO 26722:2009. Water treatment equipment for haemodialysis applications and related therapies
BS ISO 26802:2010. Nuclear facilities. Criteria for the design and the operation of containment and ventilation systems for nuclear reactors
BS ISO 26824:2013. Particle characterization of particulate systems. Vocabulary
BS ISO 26825:2008. Anaesthetic and respiratory equipment. User-applied labels for syringes containing drugs used during anaesthesia. Colours, design and performance
BS ISO 26842-1:2009. Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood productsResistance to delamination in non-severe environments
BS ISO 26842-1:2013. Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood productsResistance to delamination in non-severe environments
BS ISO 26842-2:2009. Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood productsResistance to delamination in severe environments
BS ISO 26842-2:2013. Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood productsResistance to delamination in severe environments
BS ISO 26865:2009. Road vehicles. Brake lining friction materials. Standard performance test procedure for commercial vehicles with air brakes
BS ISO 26866:2009. Road vehicles. Brake lining friction materials. Standard wear test procedure for commercial vehicles with air brakes
BS ISO 26867:2009. Road vehicles. Brake lining friction materials. Friction behaviour assessment for automotive brake systems
BS ISO 26868:2009. Space data and information transfer systems. Image data compression
BS ISO 26869:2012. Space systems. Small-auxiliary-spacecraft (SASC) to-launch-vehicle interface control document
BS ISO 26870:2009. Space systems. Launch pad and integration site operational documents
BS ISO 26872:2010. Space systems. Disposal of satellites operating at geosynchronous altitude
BS ISO 26900:2012. Space data and information transfer systems. Orbit data messages
BS ISO 26906:2009. Hydrometry. Fishpasses at flow measurement structures
BS ISO 2692:1988. Technical drawings. Geometrical tolerancing. Maximum material principle
BS ISO 2697:1999. Diesel engines. Fuel nozzles. Size "S"
BS ISO 2698:2013. Diesel engines. Clamp-mounted fuel injectors, types 7 and 28
BS ISO 26987:2008. Resilient floor coverings. Determination of staining and resistance to chemicals
BS ISO 27025:2010. Space systems. Programme management. Quality assurance requirements
BS ISO 27026:2011. Space systems. Programme management. Breakdown of project management structures
BS ISO 27027:2008. Aerospace. Solid-state remote power controllers. General performance requirements
BS ISO 2704:1998. Road vehicles. M10 x 1 spark plugs with flat seating and their cylinder head housings
BS ISO 27048:2011. Radiation protection. Dose assessment for the monitoring of workers for internal radiation exposure
BS ISO 2705:1999. Road vehicles. M12 x 1,25 spark plugs with flat seating and their cylinder head housings
BS ISO 2705:2006. Road vehicles. M12 x 1,25 spark plugs with flat seating and their cylinder head housings
BS ISO 27065:2011. Protective clothing. Performance requirements for protective clothing worn by operators applying liquid pesticides
BS ISO 2709:1996. Information and documentation. Format for information interchange
BS ISO 2709:2008. Information and documentation. Format for information exchange
BS ISO 2710-1:2000. Reciprocating internal combustion engines. VocabularyTerms for engine design and operation
BS ISO 2710-2:1999. Reciprocating internal combustion engines. VocabularyTerms for engine maintenance
BS ISO 27108:2010. Water quality. Determination of selected plant treatment agents and biocide products. Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS)
BS ISO 27145-1:2012. Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirementsGeneral information and use case definition
BS ISO 27145-2:2012. Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirementsCommon data dictionary
BS ISO 27145-3:2012. Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirementsCommon message dictionary
BS ISO 27145-4:2012. Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirementsConnection between vehicle and test equipment
BS ISO 27185:2012. Cardiac rhythm management devices. Symbols to be used with cardiac rhythm management device labels, and information to be supplied. General requirements
BS ISO 27186:2010. Active implantable medical devices. Four-pole connector system for implantable cardiac rhythm management devices. Dimensional and test requirements
BS ISO 27205:2010. Fermented milk products. Bacterial starter cultures. Standard of identity
BS ISO 2721:2013. Photography. Film-based cameras. Automatic controls of exposure
BS ISO 2725-3:2001. Assembly tools for screws and nuts. Square drive socketsMachine-operated sockets ("non-impact"). Dimensions
BS ISO 27306:2009. Metallic materials. Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
BS ISO 27327-1:2009. Fans. Air curtain unitsLaboratory methods of testing for aerodynamic performance rating
BS ISO 27368:2008. Analysis of blood for asphyxiant toxicants. Carbon monoxide and hydrogen cyanide
BS ISO 27407:2010. Hydraulic fluid power. Marking of performance characteristics on hydraulic filters
BS ISO 27447:2009. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antibacterial activity of semiconducting photocatalytic materials
BS ISO 27448:2009. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for self-cleaning performance of semiconducting photocatalytic materials. Measurement of water contact angle
BS ISO 27467:2009. Nuclear criticality safety. Analysis of a postulated criticality accident
BS ISO 27468:2011. Nuclear criticality safety. Evaluation of systems containing PWR UOX fuels. Bounding burnup credit approach
BS ISO 27470:2011. Aircraft ground equipment. Upper deck catering vehicle. Functional requirements
BS ISO 27471:2012. Aircraft ground equipment. Upper deck loader. Functional requirements
BS ISO 27547-1:2010. Plastics. Preparation of test specimens of thermoplastic materials using mouldless technologiesGeneral principles, and laser sintering of test specimens
BS ISO 27588:2008. Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
BS ISO 27588:2012. Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
BS ISO 27608:2010. Animal and vegetable fats and oils. Determination of Lovibond® colour. Automatic method
BS ISO 27667:2011. Road vehicles. Brake lining friction materials. Evaluation of corrosion effects on painted backing plates and brake shoes
BS ISO 27668-1:2009. Gel ink ball pens and refillsGeneral use
BS ISO 27668-2:2009. Gel ink ball pens and refillsDocumentary use (DOC)
BS ISO 27727:2008. Rubber, vulcanized. Measurement of fatigue crack growth rate
BS ISO 27729:2012. Information and documentation. International standard name identifier(ISNI)
BS ISO 27730:2012. Information and documentation. International standard collection identifier (ISCI)
BS ISO 2780:2006. Milling cutters with tenon drive. Interchangeability dimensions for cutter arbors. Metric series
BS ISO 2781:2008+A1:2010. Rubber, vulcanized or thermoplastic. Determination of density
BS ISO 2782:2006. Rubber, vulcanized or thermoplastic. Determination of permeability to gases
BS ISO 2782-1:2012. Rubber, vulcanized or thermoplastic. Determination of permeability to gasesDifferential-pressure methods
BS ISO 2782-2:2012. Rubber, vulcanized or thermoplastic. Determination of permeability to gasesEqual-pressure method
BS ISO 27830:2008. Metallic and other inorganic coatings. Guidelines for specifying metallic and inorganic coatings
BS ISO 27831-1:2008. Metallic and other inorganic coatings. Cleaning and preparation of metal surfacesFerrous metals and alloys
BS ISO 27831-2:2008. Metallic and other inorganic coatings. Cleaning and preparation of metal surfacesNon-ferrous metals and alloys
BS ISO 27850:2013. Tractors for agriculture and forestry. Falling object protective structures. Test procedures and performance requirements
BS ISO 27852:2011. Space systems. Estimation of orbit lifetime
BS ISO 27871:2011. Cheese and processed cheese. Determination of the nitrogenous fractions
BS ISO 27875:2010. Space systems. Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages
BS ISO 2789:2006. Information and documentation. International library statistics
BS ISO 2789:2013. Information and documentation. International library statistics
BS ISO 27892:2010. Vacuum technology. Turbomolecular pumps. Measurement of rapid shutdown torque
BS ISO 27893:2011. Vacuum technology. Vacuum gauges. Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
BS ISO 27894:2009. Vacuum technology. Vacuum gauges. Specifications for hot cathode ionization gauges
BS ISO 27895:2009. Vacuum technology. Valves. Leak test
BS ISO 279:1998. Essential oils. Determination of relative density at 20°C. Reference method
BS ISO 2790:2004. Belt drives. V-belts for the automotive industry and corresponding pulleys. Dimensions
BS ISO 27911:2011. Surface chemical analysis. Scanning-probe microscopy. Definition and calibration of the lateral resolution of a near-field optical microscope
BS ISO 27956:2009. Road vehicles. Securing of cargo in delivery vans. Requirements and test methods
BS ISO 27991:2008. Ships and marine technology. Marine evacuation systems. Means of communication
BS ISO 27996:2009. Aerospace fluid systems. Elastomer seals. Storage and shelf life
BS ISO 280:1998. Essential oils. Determination of refractive index
BS ISO 28000:2007. Specification for security management systems for the supply chain
BS ISO 28001:2007. Security management systems for the supply chain. Best practices for implementing supply chain security, assessments and plans. Requirements and guidance
BS ISO 28002:2011. Security management systems for the supply chain. Development of resilience in the supply chain. Requirements with guidance for use
BS ISO 28003:2007. Security management systems for the supply chain. Requirements for bodies providing audit and certification of supply chain security management systems
BS ISO 28004:2007. Security management systems for the supply chain. Guidelines for the implementation of ISO 28000
BS ISO 28005-1:2013. Security management systems for the supply chain. Electronic port clearance (EPC)Message structures
BS ISO 28005-2:2011. Security management systems for the supply chain. Electronic port clearance (EPC)Core data elements
BS ISO 28017:2009. Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications. Specification
BS ISO 2804:1996. Wire, bar or tube drawing dies. As-sintered pellets of hardmetal (carbide). Dimensions
BS ISO 28077:2006. Photocarcinogenesis action spectrum (non-melanoma skin cancers)
BS ISO 28078-1:2009. Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materialsDesignation system and basis for specifications
BS ISO 28078-2:2009. Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS ISO 28079:2009. Hardmetals. Palmqvist toughness test
BS ISO 28080:2011. Hardmetals. Abrasion tests for hardmetals
BS ISO 281:2007. Rolling bearings. Dynamic load ratings and rating life
BS ISO 28178:2009. Graphic technology. Exchange format for colour and process control data using XML or ASCII text
BS ISO 28198:2009. Vegetable fats and oils. Determination of toluene insoluble matter
BS ISO 28218:2010. Radiation protection. Performance criteria for radiobioassay
BS ISO 28219:2009. Packaging. Labelling and direct product marking with linear bar code and two-dimensional symbols
BS ISO 28239:2008. Textile machinery. Opener and cleaner for staple fibres preparation. Vocabulary and principles of construction
BS ISO 2827:1988. Photography. Electronic flash equipment. Determination of light output and performance
BS ISO 28279:2010. Sintered metal materials. Determination of the level of cleanliness of powder-metallurgy parts
BS ISO 2834:1999. Graphic technology. Test print preparation for offset and letterpress inks
BS ISO 28340:2013. Combined coatings on aluminium. General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium
BS ISO 2834-1:2006. Graphic technology. Laboratory preparation test printsPaste inks
BS ISO 2834-2:2007. Graphic technology. Laboratory preparation of test printsLiquid printing inks
BS ISO 2834-3:2008. Graphic technology. Laboratory preparation of test printsScreen printing inks
BS ISO 28343:2010. Rubber compounding ingredients. Process oils. Determination of glass transition temperature by DSC
BS ISO 2836:1999. Graphic technology. Prints and printing inks. Assessment of resistance to various agents
BS ISO 2836:2004. Graphic technology. Prints and printing inks. Assessment of resistance to various agents
BS ISO 2837:1996. Graphic technology. Prints and printing inks. Assessment of resistance to solvents
BS ISO 2846-1:1997. Graphic technology. Colour and transparency of ink sets for four-colour-printingSheet-fed and heat-set web offset lithographic printing
BS ISO 2846-1:2006. Graphic technology. Colour and transparency of printing ink sets for four-colour printingPart 1. Sheet-fed and heat-set web offset lithographic printing
BS ISO 2846-2:2000. Graphic technology. Colour and transparency of ink sets for four-colour-printingColdset offset lithographic printing
BS ISO 2846-2:2007. Graphic technology. Colour and transparency of printing ink sets for four-colour printingColdset offset lithographic printing
BS ISO 2846-4:2000. Graphic technology. Colour and transparency of ink sets for four-colour-printingScreen printing
BS ISO 2846-5:2005. Graphic technology. Colour and transparency of printing ink sets for four-colour printingFlexographic printing
BS ISO 28500:2009. Information and documentation. WARC file format
BS ISO 28540:2011. Water quality. Determination of 16 polycyclic aromatic hydrocarbons (PAH) in water. Method using gas chromatography with mass spectrometric detection (GC-MS)
BS ISO 28560-1:2011. Information and documentation. RFID in librariesData elements and general guidelines for implementation
BS ISO 28560-2:2011. Information and documentation. RFID in librariesEncoding of RFID data elements based on rules from ISO/IEC 15962
BS ISO 28560-3:2011. Information and documentation. RFID in librariesFixed length encoding
BS ISO 28564-1:2010. Public information guidance systemsDesign principles and element requirements for location plans, maps and diagrams
BS ISO 28580:2009. Passenger car, truck and bus tyres. Methods of measuring rolling resistance. Single point test and correlation of measurement results
BS ISO 28600:2011. Surface chemical analysis. Data transfer format for scanning-probe microscopy
BS ISO 2861:2013. Vacuum technology. Dimensions of clamped-type quick-release couplings
BS ISO 28620:2010. Medical devices. Non-electrically driven portable infusion devices
BS ISO 28640:2010. Random variate generation methods
BS ISO 28641:2010. Rubber compounding ingredients. Organic chemicals. General test methods
BS ISO 28702:2008. Rubber and plastics hoses and tubing. Textile reinforced types. Sub-ambient temperature crush test
BS ISO 28703:2011. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for thermal-shock resistance of porous ceramics
BS ISO 28704:2011. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for cyclic bending fatigue of porous ceramics at room temperature
BS ISO 28741:2009. Road vehicles. Spark-plugs and their cylinder head housings. Basic characteristics and dimensions
BS ISO 2878:2005. Rubber. Antistatic and conductive products. Determination of electrical resistance
BS ISO 2878:2011. Rubber, vulcanized or thermoplastic. Antistatic and conductive products. Determination of electrical resistance
BS ISO 28801:2011, BS 6001-9:2011. Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
BS ISO 2889:2010. Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities
BS ISO 28901:2011. Soil quality. Guidance for burial of animal carcasses to prevent epidemics
BS ISO 289-1:2005. Rubber, unvulcanized. Determinations using a shearing-disc viscometerDetermination of Mooney viscosity
BS ISO 28921-1:2013. Industrial valves. Isolating valves for low-temperature applicationsDesign, manufacturing and production testing
BS ISO 289-4:2003. Rubber, unvulcanized. Determinations using a shearing-disc viscometerDetermination of the Mooney stress-relaxation rate
BS ISO 28961:2012. Acoustics. Statistical distribution of hearing thresholds of otologically normal persons in the age range from 18 years to 25 years under free-field listening conditions
BS ISO 2897-1:1990. Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materialsDesignation
BS ISO 28981:2009. Mopeds. Methods for setting the running resistance on a chassis dynamometer
BS ISO 29:1980. Cinematography. Projector usage of 8 mm Type R silent motion-picture film for direct front projection. Specifications
BS ISO 2906:2002. Cinematography. Image area produced by camera aperture on 35mm motion picture film. Position and dimensions
BS ISO 29061-1:2010. Road vehicles. Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systemsVehicles and child restraint systems equipped with ISOFIX anchorages and attachments
BS ISO 2907:2002. Cinematography. Maximum projectable image area on 35 mm motion-picture film. Position and dimensions
BS ISO 29081:2010. Surface chemical analysis. Auger electron spectroscopy. Reporting of methods used for charge control and charge correction
BS ISO 2909:2002, BS 2000-226:2002. Methods of test for petroleum and its products. Petroleum products. Calculation of viscosity index from kinematic viscosity
BS ISO 2910:2007. Cinematography. Screen luminance and chrominance for the projection of motion pictures
BS ISO 2911:2004. Sweetened condensed milk. Determination of sucrose content. Polarimetric method
BS ISO 2919:2012. Radiological protection. Sealed radioactive sources. General requirements and classification
BS ISO 2920:2004. Whey cheese. Determination of dry matter (Reference method)
BS ISO 2921:2005. Rubber, vulcanized. Determination of low-temperature characteristics. Temperature-retraction procedure (TR test)
BS ISO 2921:2011. Rubber, vulcanized. Determination of low-temperature retraction (TR test)
BS ISO 2926:2005. Aluminium oxide used for the production of primary aluminium. Particle size analysis for the range 45 μm to 150 μm. Method using electroformed sieves
BS ISO 2926:2013. Aluminium oxide used for the production of primary aluminium. Particle size analysis for the range 45 $GMm to 150 $GMm. Method using electroformed sieves
BS ISO 29262:2011. Production equipment for microsystems. Interface between end effector and handling system
BS ISO 29281:2011. Intelligent transport systems. Communications access for land mobiles (CALM). Non-IP networking
BS ISO 29281-1:2013. Intelligent transport systems. Communication access for land mobiles (CALM). Non-IP networkingFast networking & transport layer protocol (FNTP)
BS ISO 29281-2:2013. Intelligent transport systems. Communication access for land mobiles (CALM). Non-IP networkingLegacy system support
BS ISO 29282:2011. Intelligent transport systems. Communications access for land mobiles (CALM). Satellite networks
BS ISO 29283:2011. ITS CALM mobile wireless broadband applications using communications in accordance with IEEE 802.20
BS ISO 2929:2002. Rubber hoses and hose assemblies for bulk fuel delivery by truck. Specification
BS ISO 2930:1995+A1:2008. Rubber, raw natural. Determination of plasticity retention index (PRI)
BS ISO 2930:2009. Rubber, raw natural. Determination of plasticity retention index (PRI)
BS ISO 29301:2010. Microbeam analysis. Analytical transmission electron microscopy. Methods for calibrating image magnification by using reference materials having periodic structures
BS ISO 2936:1995. Assembly tools for screws and nuts. Hexagon socket screw keys
BS ISO 29383:2010. Terminology policies. Development and implementation
BS ISO 2939:1986. Cinematography. Picture image area and photographic sound record on 35 mm motion-picture release prints. Positions and dimensions
BS ISO 2939:2002. Cinematography. Picture image area on 35 mm motion-picture release prints. Position and dimensions
BS ISO 2941:1974. Hydraulic fluid power. Filter elements. Verification of collapse/burst resistance
BS ISO 2941:2009. Hydraulic fluid power. Filter elements. Verification of collapse/burst pressure rating
BS ISO 2942:1994. Hydraulic fluid power. Filter elements. Verification of fabrication integrity and determination of the first bubble point
BS ISO 2942:2004. Hydraulic fluid power. Filter elements. Verification of fabrication integrity and determination of the first bubble point
BS ISO 2943:1998. Hydraulic fluid power. Filter elements. Verification of material compatibility with fluids
BS ISO 2944:2000. Fluid power systems and components. Nominal pressures
BS ISO 29464:2011. Cleaning equipment for air and other gases. Terminology
BS ISO 29470:2008. Thermal insulating products for building applications. Determination of the apparent density
BS ISO 29473:2010. Fire tests. Uncertainty of measurements in fire tests
BS ISO 29481-1:2010. Building information modelling. Information delivery manualMethodology and format
BS ISO 29481-2:2012. Building information models. Information delivery manualInteraction framework
BS ISO 2953:1999. Mechanical vibration. Balancing machines. Description and evaluation
BS ISO 2954:2012. Mechanical vibration of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity
BS ISO 29541:2010. Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen content. Instrumental method
BS ISO 29581-2:2010. Cement. Test methodsChemical analysis by X-ray fluorescence
BS ISO 2962:2010. Cheese and processed cheese products. Determination of total phosphorus content. Molecular absorption spectrometric method
BS ISO 2965:2009. Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability. Determination of air permeability
BS ISO 2966:1988. Cinematography. 16 mm motion-picture film perforated 8 mm type S [1-3] and [1-4]. Cutting and perforating dimensions
BS ISO 29664:2010. Plastics. Artificial weathering including acidic deposition
BS ISO 2967:1982. Cinematography. Magnetic stripes for sound records on 35 mm motion-picture film perforated 8 mm Type S-5R (1-3-5-7-0). Positions and width dimensions
BS ISO 29681:2009. Paper, board and pulps. Determination of pH of salted water extracts
BS ISO 2971:2013. Cigarettes and filter rods. Determination of nominal diameter. Method using a non-contact optical measuring apparatus
BS ISO 2974:2005. Diesel engines. High-pressure fuel injection pipe end-connections with 60° female cone
BS ISO 2974:2013. Diesel engines. 60 degree female cones for high-pressure fuel injection components
BS ISO 2976:2005. Coated abrasives. Abrasive belts. Selection of width/length combinations
BS ISO 29781:2008. Prostheses and orthoses. Factors to be included when describing physical activity of a person who has had a lower limb amputation(s) or who has a deficiency of a lower limb segment(s) present at birth
BS ISO 29782:2008. Prostheses and orthoses. Factors to be considered when specifying a prosthesis for a person who has had a lower limb amputation
BS ISO 29783-1:2008. Prosthetics and orthotics. VocabularyNormal gait
BS ISO 29802:2009. All terrain (AT) tyres and rims. Symbol marked pneumatic tyres on 5 degrees tapered rims. Designation, dimension, marking and load ratings
BS ISO 2982-1:1995. Rolling bearings. AccessoriesTapered sleeves. Dimensions
BS ISO 2982-1:2013. Rolling bearings. AccessoriesDimensions for adapter sleeve assemblies and withdrawal sleeves
BS ISO 29821-1:2011. Condition monitoring and diagnostics of machines. UltrasoundGeneral guidelines
BS ISO 2982-2:1995. Rolling bearings. AccessoriesLocknuts and locking devices. Dimensions
BS ISO 2982-2:2001. Rolling bearings. AccessoriesLocknuts and locking devices. Dimensions
BS ISO 29822:2009. Vegetable fats and oils. Isomeric diacylglycerols. Determination of relative amounts of 1,2- and 1,3-diacylglycerols
BS ISO 2982-2:2013. Rolling bearings. AccessoriesDimensions for locknuts and locking devices
BS ISO 29841:2009. Vegetable fats and oils. Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins)
BS ISO 29842:2011. Sensory analysis. Methodology. Balanced incomplete block designs
BS ISO 29845:2011. Technical product documentation. Document types
BS ISO 29861:2009. Document management applications. Quality control for scanning office documents in colour
BS ISO 29903:2012. Guidance for comparison of toxic gas data between different physical fire models and scales
BS ISO 29941:2010. Condoms. Determination of nitrosamines migrating from natural rubber latex condoms
BS ISO 29942:2011. Prophylactic dams. Requirements and test methods
BS ISO 29945:2009. Refrigerated non-petroleum-based liquefied gaseous fuels. Dimethylether (DME). Method of manual sampling onshore terminals
BS ISO 29981:2010. Milk products. Enumeration of presumptive bifidobacteria. Colony count technique at 37 °C
BS ISO 29990:2010. Learning services for non-formal education and training. Basic requirements for service providers
BS ISO 30000:2009. Ships and marine technology. Ship recycling management systems. Specifications for management systems for safe and environmentally sound ship recycling facilities
BS ISO 30002:2010. Ships and marine technology. Ship recycling management systems. Guidelines for selection of ship recyclers (and pro forma contract)
BS ISO 30002:2012. Ships and marine technology. Ship recycling management systems. Guidelines for selection of ship recyclers (and pro forma contract)
BS ISO 30003:2009. Ships and marine technology. Ship recycling management systems. Requirements for bodies providing audit and certification of ship recycling management
BS ISO 30004:2012. Ships and marine technology. Ship recycling management systems. Guidelines for the implementation of ISO 30000
BS ISO 30005:2012. Ships and marine technology. Ship recycling management systems. Information control for hazardous materials in the manufacturing chain of shipbuilding and ship operations
BS ISO 30006:2010. Ship recycling management systems. Diagrams to show the location of hazardous materials onboard ships
BS ISO 30011:2010. Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
BS ISO 30021:2013. Plastics. Burning behavior. Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
BS ISO 30042:2008. Systems to manage terminology, knowledge and content. TermBase eXchange (TBX)
BS ISO 3007:1999, BS 2000-69:2001. Methods of test for petroleum and its products. BS 2000-69. Petroleum products. Determination of vapour pressure. Reid method
BS ISO 3009:2003. Fire resistance tests. Elements of building construction. Glazed elements
BS ISO 3011:1997. Rubber- or plastics-coated fabrics. Determination of resistance to ozone cracking under static conditions
BS ISO 3019-1:2001. Hydraulic fluid power. Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motorsInch series shown in metric units
BS ISO 3019-2:2001. Hydraulic fluid power. Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motorsMetric series
BS ISO 302:2004. Pulps. Determination of Kappa number
BS ISO 3022:1988. Cinematography. 35 mm motion-picture film perforated 16 mm (1-3-0). Cutting and perforating dimensions
BS ISO 3023:1995. Cinematography. 65 mm and 70 mm unexposed motion-picture film. Cutting and perforating dimensions
BS ISO 3026:1992. Cinematography. Printed 8 mm Type S image area on 35 mm motion-picture film perforated 8 mm Type S, 2R-4.227 (1664) or 5R-4.234 (1667). Position and dimensions
BS ISO 3027:1984. Cinematography. Magnetic stripes and recording head gaps for sound record on 8 mm Type S motion-picture films. Position and width dimensions
BS ISO 3029:1995. Photography. 126 size cartridges. Dimensions of cartridge, film and backing paper
BS ISO 3030:1996. Rolling bearings. Radial needle roller and cage assemblies. Dimensions and tolerances
BS ISO 3030:2011. Rolling bearings. Radial needle roller and cage assemblies. Boundary dimensions and tolerances
BS ISO 30300:2011. Information and documentation. Management systems for records. Fundamentals and vocabulary
BS ISO 30301:2011. Information and documentation. Management systems for records. Requirements
BS ISO 3031:2000. Rolling bearings. Thrust needle roller and cage assemblies, thrust washers. Boundary dimensions and tolerances
BS ISO 3033-1:2005. Oil of spearmintNative type (Mentha spicata L.)
BS ISO 3033-2:2005. Oil of spearmintChinese types (80 % and 60 %) (Mentha viridis L. var. crispa Benth.), redistilled oil
BS ISO 3033-3:2005. Oil of spearmintIndian type (Mentha spicata L.), redistilled oil
BS ISO 3033-4:2005. Oil of spearmintScotch variety (Mentha X gracilis Sole)
BS ISO 3034:2011. Corrugated fibreboard. Determination of single sheet thickness
BS ISO 3039:2010. Corrugated fibreboard. Determination of grammage of the component papers after separation
BS ISO 3040:1990. Technical drawings. Dimensioning and tolerancing. Cones
BS ISO 3045:2004. Oil of bay [Pimenta racemosa (Mill.) J.W. Moore]
BS ISO 3046-1:2002. Reciprocating internal combustion engines. PerformanceDeclarations of power, fuel and lubricating oil consumptions, and test methods. Additional requirements for engines for general use
BS ISO 3046-3:2006. Reciprocating internal combustion engines. PerformanceTest measurements
BS ISO 3046-4:2009. Reciprocating internal combustion engines. PerformanceSpeed governing
BS ISO 3046-5:2001. Reciprocating internal combustion engines. PerformanceTorsional vibrations
BS ISO 3053:2004. Oil of grapefruit (Citrus x paradisi Macfad.), obtained by expression
BS ISO 3057:1998. Non-destructive testing. Metallographic replica techniques of surface examination
BS ISO 3058:1998. Non-destructive testing. Aids to visual inspection. Selection of low-power magnifiers
BS ISO 3061:2008. Oil of black pepper (Piper nigrum L.)
BS ISO 3063:2004. Oil of ylang-ylang (Cananga odorato (Lam) Hook.f.et.Thomson forma genuina
BS ISO 3065:2011. Oil of eucalyptus Australian type, containing a volume fraction of 80 % to 85 % of 1,8-cineole
BS ISO 3068:1982. Cinematography. Magnetic stripes for sound records on 16 mm motion-picture film perforated 8 mm Type S-2R (1-4) and (1-3). Positions and width dimensions
BS ISO 3069:2000. End-suction centrifugal pumps. Dimensions of cavities for mechanical seals and for soft packing
BS ISO 3070-1:2007. Machine tools. Test conditions for testing the accuracy of boring and milling machines with horizontal spindleMachines with fixed column and movable table
BS ISO 3070-2:1997. Test conditions for boring and milling machines with horizontal spindle. Testing of the accuracyTable-type machines
BS ISO 3070-2:2007. Machine tools. Test conditions for testing the accuracy of boring and milling machines with horizontal spindleMachines with movable column and fixed table
BS ISO 3070-3:1997. Test conditions for boring and milling machines with horizontal spindle. Testing of the accuracyFloor type machines with detached, stationary work-holding table
BS ISO 3070-3:2007. Machine tools. Test conditions for testing the accuracy of boring and milling machines with horizontal spindleMachines with movable column and movable table
BS ISO 3070-4:1998. Test conditions for boring and milling machines with horizontal spindle. Testing of the accuracyPlaner type machines with movable column
BS ISO 3082:2009. Iron ores. Sampling and sample preparation procedures
BS ISO 3085:1996. Iron ores. Experimental methods for checking the precision of sampling
BS ISO 3085:2002. Iron ores. Experimental methods for checking the precision of sampling, sample preparation and measurement
BS ISO 3086:1998. Iron ores. Experimental methods for checking the bias of sampling
BS ISO 3086:2006. Iron ores. Experimental methods for checking the bias of sampling
BS ISO 3087:1998. Iron ores. Determination of the moisture content of a lot
BS ISO 3087:2011. Iron ores. Determination of the moisture content of a lot
BS ISO 3089:2005. Machine tools. Test conditions for self-centring, manually-operated chucks with one-piece jaws
BS ISO 3096:1996. Rolling bearings. Needle rollers. Dimensions and tolerances
BS ISO 31-0:1992. Quantities and unitsGeneral principles
BS ISO 31000:2009. Risk management. Principles and guidelines
BS ISO 31-1:1992. Quantities and unitsSpace and time
BS ISO 31-10:1992. Quantities and unitsNuclear reactions and ionizing radiations
BS ISO 31-11:1992. Quantities and unitsMathematical signs and symbols for use in the physical sciences and technology
BS ISO 31-12:1992. Quantities and unitsCharacteristic numbers
BS ISO 31-13:1992. Quantities and unitsSolid state physics
BS ISO 3116:2001. Magnesium and magnesium alloys. Wrought magnesium alloys
BS ISO 3116:2007. Magnesium and magnesium alloys. Wrought magnesium alloys
BS ISO 31-2:1992. Quantities and unitsPeriodic and related phenomena
BS ISO 3129:2012. Wood. Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens
BS ISO 31-3:1992. Quantities and unitsMechanics
BS ISO 31-4:1992. Quantities and unitsHeat
BS ISO 3140:2005. Oil of sweet orange [Citrus sinensis (L.) Obsbeck], obtained by mechanical treatment
BS ISO 31-5:1992. Quantities and unitsElectricity and magnetism
BS ISO 3159:2009. Timekeeping instruments. Wrist-chronometers with spring balance oscillator
BS ISO 31-6:1992. Quantities and unitsLight and related electromagnetic radiations
BS ISO 3160-1:1998. Watch-cases and accessories. Gold alloy coveringsGeneral requirements
BS ISO 3160-2:2003. Watch-cases and accessories. Gold alloy coveringsDetermination of fineness, thickness, corrosion resistance and adhesion
BS ISO 3166-2:1998. Codes for the representation of names of countries and their subdivisionsCountry subdivision code
BS ISO 3166-2:2007. Codes for the representation of names of countries and their subdivisionsCountry subdivision code
BS ISO 3166-3:1999. Codes for the representation of names of countries and their subdivisionsCode for formerly used names of countries
BS ISO 31-7:1992. Quantities and unitsAcoustics
BS ISO 31-8:1992. Quantities and unitsPhysical chemistry and molecular physics
BS ISO 3183-3:1999. Petroleum and natural gas industries. Steel pipe for pipelines. Technical delivery conditionsPipes of requirement class C
BS ISO 3185:2008. Aerospace. Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
BS ISO 3186:2008. Aerospace. Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa. Dimensions
BS ISO 31-9:1992. Quantities and unitsAtomic and nuclear physics
BS ISO 3193:2008. Aerospace. Bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
BS ISO 32000-1:2008. Document management. Portable document formatPDF 1.7
BS ISO 3218:1976. Essential oils. Principles of nomenclature
BS ISO 3228:2013. Rolling bearings. Cast and pressed housings for insert bearings. Boundary dimensions and tolerances
BS ISO 3245:1997. Rolling bearings. Needle roller bearings, drawn cup without inner rings. Boundary dimensions and tolerances
BS ISO 3245:2007. Rolling bearings. Needle roller bearings, drawn cup without inner ring. Boundary dimensions and tolerances
BS ISO 3271:1995. Iron ores. Determination of tumble strength
BS ISO 3271:2007. Iron ores for blast furnace and direct reduction feedstocks. Determination of the tumble and abrasion indices
BS ISO 3272-1:2003. Microfilming of technical drawings and other drawing office documentsOperating procedures
BS ISO 3272-2:1994. Microfilming of technical drawings and other drawing office documentsQuality criteria and control of 35 mm silver gelatin microfilms
BS ISO 3272-3:2001. Microfilming of technical drawings and other drawing office documentsAperture card for 35 mm microfilm
BS ISO 3272-4:1994. Microfilming of technical drawings and other drawing office documentsMicrofilming of drawings of special and exceptional elongated sizes
BS ISO 3272-5:1999. Microfilming of technical drawings and other drawing office documentsTest procedures for diazo duplicating of microfilm images in aperture cards
BS ISO 3272-6:2000. Microfilming of technical drawings and other drawing office documentsQuality criteria and control of systems for enlargement from 35mm microfilm
BS ISO 3287:1999. Powered industrial trucks. Symbols for operator controls and other displays
BS ISO 3290:1998. Rolling bearings. Balls. Dimensions and tolerances
BS ISO 3290:2001. Rolling bearings. Balls. Dimensions and tolerances
BS ISO 3290-1:2008. Rolling bearings. BallsSteel balls
BS ISO 3290-2:2008. Rolling bearings. BallsCeramic balls
BS ISO 3297:2007. Information and documentation. International standard serial number (ISSN)
BS ISO 3298:1994. Photography. Processing chemicals. Specifications for glacial acetic acid
BS ISO 3299:1994. Photography. Processing chemicals. Specifications for 1-phenyl-3-pyrazolidinone
BS ISO 3303-1:2012. Rubber- or plastics-coated fabrics. Determination of bursting strengthSteel-ball method
BS ISO 3303-2:2012. Rubber- or plastics-coated fabrics. Determination of bursting strengthHydraulic method
BS ISO 3308:2000+A1:2009. Routine analytical cigarette-smoking machine. Definitions and standard conditions
BS ISO 3308:2012. Routine analytical cigarette-smoking machine. Definitions and standard conditions
BS ISO 3310-2:2013. Test sieves. Technical requirements and testingTest sieves of perforated metal plate
BS ISO 3315:2011. Assembly tools for screws and nuts. Driving parts for hand-operated square drive socket wrenches. Dimensions and tests
BS ISO 3316:2012. Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions and tests
BS ISO 3317:2009. Assembly tools for screws and nuts. Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches
BS ISO 3322:1985. Fluid power systems and components. Cylinders. Nominal pressures
BS ISO 3324-1:2013. Aircraft tyres and rimsSpecifications
BS ISO 3324-2:2013. Aircraft tyres and rimsTest methods for tyres
BS ISO 3334:2006. Micrographics. ISO resolution test chart No 2. Description and use
BS ISO 3338-1:1996. Cylindrical shanks for milling cuttersDimensional characteristics of plain cylindrical shanks
BS ISO 3338-2:1996. Cylindrical shanks for milling cuttersDimensional characteristics of flatted cylindrical shanks
BS ISO 3338-2:2007. Cylindrical shanks for milling cuttersDimensional characteristics of flatted cylindrical shanks
BS ISO 3338-2:2013. Cylindrical shanks for milling cuttersDimensional characteristics of flatted cylindrical shanks
BS ISO 3341:2000. Textile glass. Yarns. Determination of breaking force and breaking elongation
BS ISO 3342:1995. Textile glass. Mats. Determination of tensile breaking force
BS ISO 3342:2011. Textile glass. Mats. Determination of tensile breaking force
BS ISO 3343:2010. Reinforcement yarns. Determination of twist balance index
BS ISO 3354:2008. Measurement of clean water flow in closed conduits. Velocity-area method using current-meters in full conduits and under regular flow conditions
BS ISO 3356:2009. Milk. Determination of alkaline phosphatase
BS ISO 3364:2011. Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole. Dimensions
BS ISO 3366:1999. Coated abrasives. Abrasive rolls
BS ISO 3374:2000. Reinforcement products. Mats and fabrics. Determination of mass per unit area
BS ISO 3375:2009. Textile glass. Determination of stiffness of rovings
BS ISO 3384:1999, BS 903-A42:1999. Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression at ambient and at elevated temperatures
BS ISO 3384:2005. Rubber, vulcanized or thermoplastic. Determination of stress relaxationi n compression at ambient and at elevated temperatures
BS ISO 3384-1:2011+A1:2013. Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression Testing at constant temperature
BS ISO 3384-2:2012. Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compressionTesting with temperature cycling
BS ISO 3387:2012. Rubber. Determination of crystallization effects by hardness measurements
BS ISO 3394:2012. Packaging. Complete, filled transport packages and unit loads. Dimensions of rigid rectangular packages
BS ISO 3400:1997+A1:2009. Cigarettes. Determination of alkaloids in smoke condensates. Spectrometric method
BS ISO 3408-1:2006. Ball screwsVocabulary and designation
BS ISO 3408-3:2006. Ball screwsAcceptance conditions and acceptance tests
BS ISO 3408-4:2006. Ball screwsStatic axial rigidity
BS ISO 3408-5:2006. Ball screwsStatic and dynamic axial load ratings and operational life
BS ISO 34-1:2004. Rubber, vulcanized or thermoplastic. Determination of tear strengthTrouser, angle and crescent test pieces
BS ISO 34-1:2010. Rubber, vulcanized or thermoplastic. Determination of tear strengthTrouser, angle and crescent test pieces
BS ISO 3417:2008. Rubber. Measurement of vulcanization characteristics with the oscillating disc curemeter
BS ISO 34-2:2007. Rubber, vulcanized or thermoplastic. Determination of tear strengthSmall (Delft) test pieces
BS ISO 34-2:2011. Rubber, vulcanized or thermoplastic. Determination of tear strengthSmall (Delft) test pieces
BS ISO 3434:1992. Shipbuilding and marine structures. Heated glass panes for ships rectangular windows
BS ISO 3434:2012. Ships and marine technology. Heated glass panes for ships’ rectangular windows
BS ISO 3438:2003. Subland twist drills with Morse taper shanks for holes prior to tapping screw threads
BS ISO 3438:2013. Subland twist drills for holes prior to tapping screw threads
BS ISO 3439:2003. Subland twist drills with cylindrical shanks for holes prior to tapping screw threads
BS ISO 3442-1:2005. Machine tools. Dimensions and geometric tests for self-centring chucks with two-piece jawsManually operated chucks with tongue and groove type jaws
BS ISO 3442-2:2005. Machine tools. Dimensions and geometric tests for self-centring chucks with two-piece jawsPower-operated chucks with tongue and groove type jaws
BS ISO 3442-3:2007. Machine tools. Dimensions and geometric tests for self-centring chucks with two-piece jawsPower-operated chucks with serrated jaws
BS ISO 3454:2008. Hydrometry. Direct depth sounding and suspension equipment
BS ISO 3455:2007. Hydrometry. Calibration of current-meters in straight open tanks
BS ISO 3463:2006. Tractors for agriculture and forestry. Roll-over protective structures (ROPS). Dynamic test method and acceptance conditions
BS ISO 35:2004. Natural rubber latex concentrate. Determination of mechanical stability
BS ISO 3507:1999. Laboratory glassware. Pyknometers
BS ISO 3509:2005. Coffee and coffee products. Vocabulary
BS ISO 3517:2012. Essential oil of neroli (Citrus aurantium L., syn. Citrus amara Link, syn. Citrus bigaradia Loisel, syn. Citrus vulgaris Risso)
BS ISO 3519:2005. Oil of lime distilled, Mexican type [Citrus aurantifolia (Christm.) Swingle]
BS ISO 3525:2008. Oil of amyris (Amyris balsamifera L.)
BS ISO 3526:2005. Oil of sage, Spanish (Salvia lavandulifolia Vahl)
BS ISO 3528:2012. Essential oil of mandarin, Italian type (Citrus reticulata Blanco)
BS ISO 3534-1:1993. Statistics. Vocabulary and symbolsProbability and general statistical terms
BS ISO 3534-1:2006. Statistics. Vocabulary and symbolsGeneral statistical terms and terms used in probability
BS ISO 3534-2:1993. Statistics. Vocabulary and symbolsStatistical quality control
BS ISO 3534-2:2006. Statistics. Vocabulary and symbolsApplied statistics
BS ISO 3534-3:1985. Statistics. Vocabulary and symbolsGlossary of terms relating to the design of experiments
BS ISO 3534-3:1999. Statistics. Vocabulary and symbolsDesign of experiments
BS ISO 3534-3:2013. Statistics. Vocabulary and symbolsDesign of experiments
BS ISO 3547-1:1999. Plain bearings. Wrapped bushesDimensions
BS ISO 3547-1:2006. Plain bearings. Wrapped bushesDimensions
BS ISO 3547-2:1999. Plain bearings. Wrapped bushesTest data for outside and inside diameter
BS ISO 3547-2:2006. Plain bearings. Wrapped bushesTest data for outside and inside diameters
BS ISO 3547-3:1999. Plain bearings. Wrapped bushesLubrication holes, lubrication grooves and lubrication indentations
BS ISO 3547-3:2006. Plain bearings. Wrapped bushesLubrication holes, grooves and indentations
BS ISO 3547-4:1999. Plain bearings. Wrapped bushesMaterials
BS ISO 3547-4:2006. Plain bearings. Wrapped bushesMaterials
BS ISO 3547-5:2007. Plain bearings. Wrapped bushesChecking the outside diameter
BS ISO 3547-6:2007. Plain bearings. Wrapped bushesChecking the inside diameter
BS ISO 3547-7:2007. Plain bearings. Wrapped bushesMeasurement of wall thickness of thin-walled bushes
BS ISO 3548:1999. Plain bearings. Thin-walled half bearings with or without Flange. Tolerances, design features and methods of test
BS ISO 3548-2:2009. Plain bearings. Thin-walled half bearings with or without flangeMeasurement of wall thickness and flange thickness
BS ISO 3548-3:2012. Plain bearings. Thin-walled half bearings with or without flangeMeasurement of peripheral length
BS ISO 355:2007+A1:2012. Rolling bearings. Tapered roller bearings. Boundary dimensions and series designations
BS ISO 3553-2:1997. Road vehicles. High tension connectors for ignition coils and distributorsPlug types
BS ISO 356:1996. Essential oils. Preparation of test samples
BS ISO 3560:2013. Road vehicles. Frontal fixed barrier or pole impact test procedure
BS ISO 3567:2011. Vacuum gauges. Calibration by direct comparison with a reference gauge
BS ISO 3575:2005. Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
BS ISO 3575:2011. Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
BS ISO 3585:1998. Borosilicate glass 3.3. Properties
BS ISO 359:1983. Cinematography. Projectable image area on 16 mm motion-picture prints. Dimensions and location
BS ISO 3597-1:2003. Textile-glass-reinforced plastics. Determination of mechanical properties on rods made of roving-reinforced resinGeneral considerations and preparation of rods
BS ISO 3597-2:2003. Textile-glass-reinforced plastics. Determination of mechanical properties on rods made of roving-reinforced resinDetermination of flexural strength
BS ISO 3597-3:2003. Textile-glass-reinforced plastics. Determination of mechanical properties on rods made of roving-reinforced resinDetermination of compressive strength
BS ISO 3597-4:2003. Textile-glass-reinforced plastics. Determination of mechanical properties on rods made of roving-reinforced resinDetermination of apparent interlaminar shear strength
BS ISO 3598:2011. Textile glass. Yarns. Basis for a specification
BS ISO 36:1999, BS 903-A12:1999. Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabric
BS ISO 36:2005. Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabrics
BS ISO 36:2011. Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabrics
BS ISO 3601-1:2008. Fluid power systems. O-ringsInside diameters, cross-sections, tolerances and designation codes
BS ISO 3601-1:2012. Fluid power systems. O-ringsInside diameters, cross-sections, tolerances and designation codes
BS ISO 3601-2:2008. Fluid power systems. O-ringsHousing dimensions for general applications
BS ISO 3601-3:2005. Fluid power systems. O-ringsQuality acceptance criteria
BS ISO 3601-4:2008. Fluid power systems. O-ringsAnti-extrusion rings (back-up rings)
BS ISO 3616:2001. Textile glass. Chopped-strand and continuous-filament mats. Determination of average thickness, thickness under load and recovery after compression
BS ISO 3617:1994. Photography. Processing chemicals. Specifications for sodium hydroxide
BS ISO 3618:1994. Photography. Processing chemicals. Specifications for benzotriazole
BS ISO 3619:1994. Photography. Processing chemicals. Specification for ammonium thiosulfate solution
BS ISO 362:1998. Acoustics. Measurement of noise emitted by accelerating road vehicles. Engineering method
BS ISO 3620:1994. Photography. Processing chemicals. Specifications for aluminium potassium sulfate
BS ISO 3621:1994. Photography. Processing chemicals. Specifications for sodium tetraborate decahydrate
BS ISO 362-1:2007. Measurement of noise emitted by accelerating road vehicles. Engineering methodM and N categories
BS ISO 3622:1996. Photography. Processing chemicals. Specifications for ammonium thiocyanate
BS ISO 362-2:2009. Measurement of noise emitted by accelerating road vehicles. Engineering methodL category
BS ISO 3623:1994. Photography. Processing chemicals. Specifications for anhydrous potassium carbonate
BS ISO 3624:1994. Photography. Processing chemicals. Specifications for potassium ferricyanide
BS ISO 3625:1994. Photography. Processing chemicals. Specifications for potassium hydroxide
BS ISO 3626:1996. Photography. Processing chemicals. Specification for potassium thiocyanate
BS ISO 3627:1994. Photography. Processing chemicals. Specifications for anhydrous sodium metabisulfite
BS ISO 3627:2001. Photography. Processing chemicals. Specifications for anhydrous sodium metabisulfite
BS ISO 3628:1994. Photography. Processing chemicals. Specifications for boric acid, granular
BS ISO 3629:1996. Photography. Processing chemicals. Specifications for dipotassium disulfite (potassium metabisulfite)
BS ISO 3629:2000. Photography. Processing chemicals. Specifications for potassium metabisulfite
BS ISO 363:1992. Textile machinery and accessories. Flat steel healds with closed end loops. Dimensions
BS ISO 363-1:2006. Textile machinery and accessories. Flat steel healds with closed end loopsDimensions of healds manufactured of rolled steel wire
BS ISO 363-2:2006. Textile machinery and accessories. Flat steel healds with closed end loopsDimensions of healds manufactured of hardened strip steel
BS ISO 3632-2:2010. Spices. Saffron (Crocus sativus L.)Test methods
BS ISO 3639:1981. Cinematography. Projection reels/spools 75 to 312 mm diameter for 8 mm Type S motion-picture film. Dimensions and specifications
BS ISO 3645:1984. Cinematography. Image area produced by 8 mm Type S motion-picture camera aperture and maximum projectable image area. Positions and dimensions
BS ISO 366-2:2009. Textile machinery and accessories. ReedsDimensions and designation of metal reeds with plate baulk
BS ISO 366-3:2009. Textile machinery and accessories. ReedsDimensions and designation of metal reeds with double-spring baulk
BS ISO 366-4:1992. Textile machinery and accessories. Reeds.Plastic bound metal reeds. Dimensions and designation
BS ISO 3664:2000. Viewing conditions for graphic technology and photography
BS ISO 366-4:2005. Textile machinery and accessories. ReedsDimensions and designation of plastic-bound metal reeds
BS ISO 3664:2009. Graphic technology and photography. Viewing conditions
BS ISO 3665:1996. Photography. Intra-oral dental radiographic film. Specification
BS ISO 3676:2012. Packaging. Complete, filled transport packages and unit loads. Unit load dimensions
BS ISO 368:1991. Spinning preparatory, spinning and doubling (twisting) machinery. Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64
BS ISO 368:2006. Spinning preparatory, spinning and doubling (twisting) machinery. Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64
BS ISO 3686-1:2000. Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle. Testing of the accuracySingle column type machines
BS ISO 3686-2:2000. Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle. Testing of the accuracyPortal type machines with moving table
BS ISO 3688:1999. Pulps. Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
BS ISO 37:2005. Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties
BS ISO 37:2011. Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties
BS ISO 3720:2011. Black tea. Definition and basic requirements
BS ISO 3723:1976. Hydraulic fluid power. Filter elements. Method for end load test
BS ISO 3724:1976. Hydraulic fluid power. Filter elements. Verification of flow fatigue characteristics
BS ISO 3724:2007. Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using particulate contaminant
BS ISO 3728:2004. Ice-cream and milk ice. Determination of total solids content (reference method)
BS ISO 3730:2012. Shipbuilding and marine structures. Mooring winches
BS ISO 3739-1:2007. Industrial tyres and rimsPneumatic tyres (metric series) on 5° tapered on flat base rims. Designation, dimensions and marking
BS ISO 3739-3:2008. Industrial tyres and rimsRims
BS ISO 3761:2005. Oil of rosewood, Brazilian type [Aniba rosaeodora Ducke var. amazonica Ducke or Aniba parviflora (Meissner) Mez]
BS ISO 3764:1997. Timekeeping instruments. Movements. Forms, dimensions and nomenclature
BS ISO 3764:2000. Timekeeping instruments. Movements. Forms, dimensions and nomenclature
BS ISO 3767-1:1998+A2:2012. Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displaysCommon symbols
BS ISO 3767-2:1991. Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displaysSymbols for agricultural tractors and machinery
BS ISO 3767-2:2008. Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displaysSymbols for agricultural tractors and machinery
BS ISO 3767-3:1995. Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displaysSymbols for powered lawn and garden equipment
BS ISO 3767-4:1993+A2:2008. Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displaysSymbols for forestry machinery
BS ISO 3767-5:1992. Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displaysSymbols for manual portable forestry machinery
BS ISO 3771:2011, BS 2000-276:2011. Petroleum products. Determination of base number. Perchloric acid potentiometric titration method
BS ISO 3772:1991. Photography. Film dimensions. Rolls for photocomposition
BS ISO 3772:2000. Photography. Rolls of sensitized material for the pre-press industry. Dimensions and related requirements
BS ISO 3773:1983. Cinematography. Tape splices for 8 mm Type S motion-picture film for projector use. Dimensions
BS ISO 3774:1988. Cinematography. 35 mm motion-picture film perforated 8 mm Type S (1-3-5-7-0) and (1-0). Cutting and perforating dimensions
BS ISO 3775:1990. Cinematography. Printed 8 mm Type S image area on 16 mm motion-picture film perforated 8 mm Type S (1-3). Position and dimensions
BS ISO 3776-1:2006. Tractors and machinery for agriculture. Seat beltsAnchorage location requirements
BS ISO 3776-2:2007. Tractors and machinery for agriculture. Seat beltsAnchorage strength requirements
BS ISO 3776-2:2013. Tractors and machinery for agriculture. Seat beltsAnchorage strength requirements
BS ISO 3776-3:2009. Tractors and machinery for agriculture. Seat beltsRequirements for assemblies
BS ISO 3779:2009. Road vehicles. Vehicle identification number (VIN). Content and structure
BS ISO 3780:2009. Road vehicles. World manufacturer identifier (WMI) code
BS ISO 3781:2011. Paper and board. Determination of tensile strength after immersion in water
BS ISO 3783:2006. Paper and board. Determination of resistance to picking. Accelerated speed method using the IGT-type tester (electric model)
BS ISO 3793:1976. Essential oils. Estimation of primary and secondary free alcohols content by acetylation in pyridine
BS ISO 3794:1976. Essential oils (containing tertiary alcohols). Estimation of free alcohols content by determination of ester value after acetylation
BS ISO 3808:2002. Road vehicles. Unscreened high-voltage ignition cables. General specifications, test methods and requirements
BS ISO 3819:1985. Laboratory glassware. Beakers
BS ISO 3828:2008. Shipbuilding and marine structures. Deck machinery. Vocabulary and symbols
BS ISO 3842:2006. Road vehicles. Fifth wheels. Interchangeability
BS ISO 3846:2008. Hydrometry. Open channel flow measurement using rectangular broad-crested weirs
BS ISO 3849:2003. Oil of citronella, Sri Lanka type [Cymbopogon nardus (L.) W. Watson var. lenabatu Stapf.]
BS ISO 3852:2007. Iron ores for blast furnace and direct reduction feedstocks. Determination of bulk density
BS ISO 3857-4:2012. Compressors, pneumatic tools and machines. VocabularyAir treatment
BS ISO 3858:2004. Rubber compounding ingredients. Carbon black. Determination of light transmittance of toluene extract
BS ISO 3858:2008. Rubber compounding ingredients. Carbon black. Determination of light transmittance of toluene extract
BS ISO 3860:2011. Bore cutters with key drive. Form milling cutters with constant profile
BS ISO 3862:2009. Rubber hoses and hose assemblies. Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids. Specification
BS ISO 3864-1:2011. Graphical symbols. Safety colours and safety signsDesign principles for safety signs and safety markings
BS ISO 3864-3:2012. Graphical symbols. Safety colours and safety signsDesign principles for graphical symbols for use in safety signs
BS ISO 3864-4:2011. Graphical symbols. Safety colours and safety signsColorimetric and photometric properties of safety sign materials
BS ISO 3865:1997, BS 903-A33:1998. Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material
BS ISO 3865:2005. Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material
BS ISO 3867:2001. Composition cork. Expansion joint fillers. Test methods
BS ISO 3869:2001. Composition cork. Expansion joint fillers. Specifications, packaging and marking
BS ISO 3874:1997. Series 1 freight containers. Handling and securing
BS ISO 3875:2004. Machine tools. Test conditions for external cylindrical centreless grinding machines. Testing of the accuracy
BS ISO 3888-1:1999. Passenger cars. Test track for a severe lane-change manoeuvreDouble-lane change
BS ISO 3888-2:2002. Passenger cars. Test track for a severe lane-change manoeuvreObstacle avoidance
BS ISO 3888-2:2011. Passenger cars. Test track for a severe lane-change manoeuvreObstacle avoidance
BS ISO 3889:2006. Milk and milk products. Specification of Mojonnier-type fat extraction flasks
BS ISO 3890-1:2000. Milk and milk products. Determination of residues of organochlorine compounds (pesticides)General considerations and extraction methods
BS ISO 3890-1:2009. Milk and milk products. Determination of residues of organochlorine compounds (pesticides)General considerations and extraction methods
BS ISO 3890-2:2000. Milk and milk products. Determination of residues of organochlorine compounds (pesticides)Test methods for crude extract purification and confirmation
BS ISO 3890-2:2009. Milk and milk products. Determination of residues of organochlorine compounds (pesticides)Test methods for crude extract purification and confirmation
BS ISO 3894:2005. Road vehicles. Wheels/rims for commercial vehicles. Test methods
BS ISO 3897:1992. Photography. Processed photographic plates. Storage practices
BS ISO 3897:1997. Photography. Processed photographic plates. Storage practices
BS ISO 3899:2005. Rubber. Nitrile latex. Determination of residual acrylonitrile content
BS ISO 39001:2012. Road traffic safety (RTS) management systems. Requirements with guidance for use
BS ISO 3901:2001. Information and documentation. International Standard Recording Code (ISRC)
BS ISO 3903:2012. Ships and marine technology. Ships’ ordinary rectangular windows
BS ISO 3911:2004. Wheels and rims for pneumatic tyres. Vocabulary, designation and marking
BS ISO 3918:1996. Milking machine installations. Vocabulary
BS ISO 3918:2007. Milking machine installations. Vocabulary
BS ISO 3919:2005. Coated abrasives. Flap wheels with shaft
BS ISO 3929:2003. Road vehicles. Measurement methods for exhaust gas emissions during inspection or maintenance
BS ISO 3937-1:2008. Cutter arbors with tenon driveDimensions of Morse taper
BS ISO 3937-2:2008. Cutter arbors with tenon driveDimensions of 7/24 taper
BS ISO 3937-3:2008. Cutter arbors with tenon driveDimensions of hollow taper interface with flange contact surface
BS ISO 3943:1993. Photography. Processing chemicals. Specifications for anhydrous sodium acetate
BS ISO 3951-1:2013. Sampling procedures for inspection by variablesSpecification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
BS ISO 3951-2:2013. Sampling procedures for inspection by variablesGeneral specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
BS ISO 3951-4:2011, BS 6002-5:2011. Sampling procedures for inspection by variablesProcedures for assessment of declared quality levels
BS ISO 3966:2008. Measurement of fluid flow in closed conduits. Velocity area method using Pitot static tubes
BS ISO 3968:2001. Hydraulic fluid power. Filters. Evaluation of differential pressure versus flow characteristics
BS ISO 3972:2011. Sensory analysis. Methodology. Method of investigating sensitivity of taste
BS ISO 3976:2006. Milk fat. Determination of peroxide value
BS ISO 3977-1:1997. Gas turbines. ProcurementGeneral introduction and definitions
BS ISO 3977-2:1997. Gas turbines. ProcurementStandard reference conditions and ratings
BS ISO 3977-3:2004. Gas turbines. ProcurementDesign requirements
BS ISO 3977-4:2002. Gas turbines. ProcurementFuels and environment
BS ISO 3977-7:2002. Gas turbines. ProcurementTechnical information
BS ISO 3977-8:2002. Gas turbines. ProcurementInspection, testing, installation and commissioning
BS ISO 3977-9:1999. Gas turbines. ProcurementReliability, availability, maintainability and safety
BS ISO 3984:2004. Road vehicles. Rear moving barrier impact test procedure
BS ISO 3987:2010, BS 2000-163:2010. Petroleum products. Determination of sulfated ash in lubricating oils and additives
BS ISO 4000-1:2007. Passenger car tyres and rimsTyres (metric series)
BS ISO 4000-1:2010. Passenger car tyres and rimsTyres (metric series)
BS ISO 4000-1:2013. Passenger car tyres and rimsTyres (metric series)
BS ISO 4000-2:2007. Passenger car tyres and rimsRims
BS ISO 4008-3:1987. Road vehicles. Fuel injection pump testingApplication and test procedures
BS ISO 4010:1998. Diesel engines. Calibrating nozzle, delay pintle type
BS ISO 4020:2001. Road vehicles. Fuel filters for diesel engines.Test methods
BS ISO 4037-1:1996. X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energyRadiation characteristics and production methods
BS ISO 4037-2:1997. X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energyDosimetry for radiation protection over the energy ranges 8 keV to 1, 3 MeV and 4 MeV to 9 MeV
BS ISO 4037-3:1999. X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energyCalibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence
BS ISO 4037-4:2004. X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energyCalibration of area and personal dosemeters in low energy X reference radiation fields
BS ISO 404:2013. Steel and steel products. General technical delivery requirements
BS ISO 4040:2009. Road vehicles. Location of hand controls, indicators and tell-tales in motor vehicles
BS ISO 4046-1:2002. Paper, board, pulps and related terms. VocabularyAlphabetical index
BS ISO 4046-2:2002. Paper, board, pulps and related terms. VocabularyPulping terminology
BS ISO 4046-3:2002. Paper, board, pulps and related terms. VocabularyPaper-making terminology
BS ISO 4046-4:2002. Paper, board, pulps and related terms. VocabularyPaper and board grades and converted products
BS ISO 4046-5:2002. Paper, board, pulps and related terms. VocabularyProperties of pulp, paper and board
BS ISO 4057:1986. Information processing. Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge, 63 bpmm (1600 bpi) phase-encoded
BS ISO 406:1987. Technical drawings. Tolerancing of linear and angular dimensions
BS ISO 4064-2:2001. Measurement of water flow in closed conduits. Meters for cold potable waterInstallation requirements and selection
BS ISO 4065:1996. Thermoplastics pipes. Universal wall thickness table
BS ISO 4079:2009. Rubber hoses and hose assemblies. Textile-reinforced hydraulic types for oil-based or water-based fluids. Specification
BS ISO 4079-2:2005. Rubber hoses and hose assemblies. Textile-reinforced hydraulic types. SpecificationWater-based fluid applications
BS ISO 4081:2005. Rubber hoses and tubing for cooling systems for internal-combustion engines. Specification
BS ISO 4081:2010. Rubber hoses and tubing for cooling systems for internal-combustion engines. Specification
BS ISO 4087:1991. Micrographics. Microfilming of newspapers for archival purposes on 35 mm microfilm
BS ISO 4087:2005. Micrographics. Microfilming of newspapers for archival purposes on 35 mm microfilm
BS ISO 4090:1991. Photography. Film dimensions. Medical radiography
BS ISO 4093:1999. Diesel engines. Fuel injection pumps. High-pressure pipes for testing
BS ISO 4094:2005. Paper, board and pulps. International calibration of testing apparatus. Nomination and acceptance of standardizing and authorized laboratories
BS ISO 4096:1978. Essential oils (containing tertiary alcohols). Evaluation of free alcohols content by determination of ester value after cold formylation
BS ISO 4097:2000. Rubber, ethylene-propylene-diene (EPDM). Evaluation procedure
BS ISO 4097:2007. Rubber, ethylene-propylene-diene (EPDM). Evaluation procedure
BS ISO 4106:2012. Motorcycles. Engine test code. Net power
BS ISO 4107:2010. Commercial vehicles. Wheelhub attachment dimensions
BS ISO 4113:2010. Road vehicles. Calibration fluids for diesel injection equipment
BS ISO 4115:1997. Air cargo equipment. Air/land pallet nets
BS ISO 4118:2000. Air cargo equipment. Non-certified lower-deck containers for air transport. Specification and testing
BS ISO 4121:2003. Sensory analysis. Guidelines for the use of quantitative response scales
BS ISO 4126-10:2010. Safety devices for protection against excessive pressureSizing of safety valves for gas/liquid two-phase flow
BS ISO 4126-9:2008. Safety devices for protection against excessive pressureApplication and installation of safety devices excluding stand-alone bursting disc safety devices
BS ISO 4129:2012. Road vehicles. Mopeds. Symbols for controls, indicators and tell-tales
BS ISO 4138:2004. Passenger cars. Steady-state circular driving behaviour. Open-loop test methods
BS ISO 4138:2012. Passenger cars. Steady-state circular driving behaviour. Open-loop test methods
BS ISO 4141-1:2005. Road vehicles. Multi-core connecting cablesTest methods and requirements for basic performance sheathed cables
BS ISO 4141-2:2006. Road vehicles. Multi-core connecting cablesTest methods and requirements for high performance sheathed cables
BS ISO 4141-3:2006. Road vehicles. Multi-core connecting cablesConstruction, dimensions and marking of unscreened sheathed low-voltage cables
BS ISO 4141-4:2009. Road vehicles. Multi-core connecting cablesTest methods and requirements for coiled cable assemblies
BS ISO 4148:2004. Road vehicles. Special warning lamps. Dimensions
BS ISO 4149:2005. Green coffee. Olfactory and visual examination and determination of foreign matter and defects
BS ISO 4150:2011. Green coffee or raw coffee. Size analysis. Manual and machine sieving
BS ISO 4156-1:2005. Straight cylindrical involute splines. Metric module, side fitGeneralities
BS ISO 4156-2:2005. Straight cylindrical involute splines. Metric module, side fitDimensions
BS ISO 4156-3:2005. Straight cylindrical involute splines. Metric module, side fitInspection
BS ISO 4161:1999. Hexagon nuts with flange. Coarse thread
BS ISO 4161:2012. Hexagon nuts with flange, style 2. Coarse thread
BS ISO 4162:2012. Hexagon bolts with flange. Small series. Product grade A with driving feature of product grade B
BS ISO 4164:2012. Mopeds. Engine test code. Net power
BS ISO 4168:2002. Timekeeping instruments. Conditions for carrying out checks on radioluminescent deposits
BS ISO 417:1993. Photography. Determination of residual thiosulfate and other related chemicals in processed photographic materials. Methods using iodine-amylose, methylene blue and silver sulfide
BS ISO 4179:2005. Ductile iron pipes and fittings for pressure and non-pressure pipelines. Cement mortar lining
BS ISO 418:1994. Photography. Processing chemicals. Specifications for anhydrous sodium sulfite
BS ISO 418:2001. Photography. Processing chemicals. Specifications for anhydrous sodium sulfite
BS ISO 4190-1:1999. Lift (US: Elevator) installationClass I, II, III and VI lifts
BS ISO 4190-1:2010. Lift (Elevator) installationClass I, II, III and VI lifts
BS ISO 4190-2:2001. Lift (US: Elevator) installationClass IV lifts
BS ISO 4190-5:2006. Lift (elevator) installationControl devices, signals and additional fittings
BS ISO 4195:2007. Conveyor belts with heat-resistant rubber covers. Heat resistance of covers. Requirements and test methods
BS ISO 4195:2012. Conveyor belts with heat-resistant rubber covers. Heat resistance of covers. Requirements and test methods
BS ISO 420:1994. Photography. Processing chemicals. Specifications for potassium bromide
BS ISO 4209-2:2012. Truck and bus tyres and rims (metric series)Rims
BS ISO 4211-2:2013. Furniture. Tests for surface finishesAssessment of resistance to wet heat
BS ISO 4211-3:2013. Furniture. Tests for surface finishesAssessment of resistance to dry heat
BS ISO 4217:2008. Codes for the representation of currencies and funds
BS ISO 422:1994. Photography. Processing chemicals. Specifications for p-methylaminophenol sulfate
BS ISO 4226:2007. Air quality. General aspects. Units of measurement
BS ISO 4229:2009. Assembly tools for screws and nuts. Single-head engineer's wrenches for lower torque applications. Maximum outside dimensions of heads and test torques
BS ISO 423:1994. Photography. Processing chemicals. Specification for hydroquinone
BS ISO 424:1994. Photography. Processing chemicals. Specification for anhydrous sodium carbonate and sodium carbonate monohydrate
BS ISO 4241:1987. Cinematography. Leaders and run-out trailers for 35 mm and 16 mm release prints. Specifications
BS ISO 4241:2001. Cinematography. Theatre projection leader, trailer and cue marks. Specifications
BS ISO 4241:2013. Cinematography. Theatre projection leader, trailer and cue marks. Specifications
BS ISO 4246:1994. Cinematography. Vocabulary
BS ISO 4249-3:2004. Motorcycle tyres and rims (code-designated series)Rims
BS ISO 4249-3:2010. Motorcycle tyres and rims (code-designated series)Rims
BS ISO 4250-1:2006. Earth-mover tyres and rimsTyre designation and dimensions
BS ISO 4250-2:2006. Earth-mover tyres and rimsLoads and inflation pressures
BS ISO 4250-3:2006. Earth-mover tyres and rimsRims
BS ISO 4250-3:2011. Earth-mover tyres and rimsRims
BS ISO 4251-1:2005+A1:2012. Tyres (ply rating marked series) and rims for agricultural tractors and machinesTyre designation and dimensions, and approved rim contours
BS ISO 4251-2:2005+A1:2011. Tyres (ply rating marked series) and rims for agricultural tractors and machinesTyre load ratings
BS ISO 4251-3:2006. Tyres (ply rating marked series) and rims for agricultural tractors and machinesRims
BS ISO 4251-4:2010. Tyres (ply rating marked series) and rims for agricultural tractors and machinesTyre classification and nomenclature
BS ISO 4252:2007. Agricultural tractors. Operator's workplace, access and exit. Dimensions
BS ISO 4254-13:2012. Agricultural machinery. SafetyLarge rotary mowers
BS ISO 4254-8:2009. Agricultural machinery. SafetySolid fertilizer distributors
BS ISO 4254-9:2008. Agricultural machinery. SafetySeed drills
BS ISO 4261:2013. Petroleum products. Fuels (class F). Specifications of gas turbine fuels for industrial and marine applications
BS ISO 4266-1:2002. Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methodsMeasurement of level in atmospheric tanks
BS ISO 4266-2:2002. Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methodsMeasurement of level in marine vessels
BS ISO 4266-3:2002. Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methodsMeasurement of level in pressurized storage tanks (non-refrigerated)
BS ISO 4266-4:2002. Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methodsMeasurement of temperature in atmospheric tanks
BS ISO 4266-5:2002. Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methodsMeasurement of temperature in marine vessels
BS ISO 4266-6:2002. Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methodsMeasurement of temperature in pressurized storage tanks (non-refrigerated)
BS ISO 4268:2000, ISO 4268:2000. Petroleum and liquid petroleum products. Temperature measurements. Manual methods
BS ISO 4269:2001. Petroleum and liquid petroleum products. Tank calibration by liquid measurement. Incremental method using volumetric meters
BS ISO 4287:1997. Geometric product specifications (GPS). Surface texture: profile method. Terms, definitions and surface texture parameters
BS ISO 4306-2:2012. Cranes. VocabularyMobile cranes
BS ISO 4306-5:2005. Cranes. VocabularyBridge and gantry cranes
BS ISO 4308-1:2003. Cranes and lifting appliances. Selection of wire ropesGeneral
BS ISO 4309:2004+A1:2008. Cranes. Wire ropes. Care, maintenance, installation, examination and discard
BS ISO 4309:2010. Cranes. Wire ropes. Care and maintenance, inspection and discard
BS ISO 4330:1994. Photography. Determination of the curl of photographic film and paper
BS ISO 4359:1983. Liquid flow measurement in open channels. Rectangular, trapezoidal and U-shaped flumes
BS ISO 4359:2013. Flow measurement structures. Rectangular, trapezoidal and U-shaped flumes
BS ISO 4360:2008. Hydrometry. Open channel flow measurement using triangular profile weirs
BS ISO 4365:2005. Liquid flow in open channels. Sediment in streams and canals. Determination of concentration, particle size distribution and relative density
BS ISO 4366:2007. Hydrometry. Echo sounders for water depth measurements
BS ISO 4377:2002. Hydrometric determinations. Flow measurement in open channels using structures. Flat-V weirs
BS ISO 4377:2012. Hydrometric determinations. Flow measurement in open channels using structures. Flat-V weirs
BS ISO 4378-1:2009. Plain bearings. Terms, definitions, classification and symbolsDesign, bearing materials and their properties
BS ISO 4378-2:2009. Plain bearings. Terms, definitions, classification and symbolsFriction and wear
BS ISO 4378-3:2009. Plain bearings. Terms, definitions, classification and symbolsLubrication
BS ISO 4378-4:2009. Plain bearings. Terms, definitions, classification and symbolsBasic symbols
BS ISO 4378-5:2009. Plain bearings. Terms, definitions, classification and symbolsApplication of symbols
BS ISO 4381:2000. Plain bearings. Lead and tin casting alloys for multilayer plain bearings
BS ISO 4381:2011. Plain bearings. Tin casting alloys for multilayer plain bearings
BS ISO 4383:2000. Plain bearings. Multilayer materials for thin-walled plain bearings
BS ISO 4383:2012. Plain bearings. Multilayer materials for thin-walled plain bearings
BS ISO 4384-1:2000. Plain bearings. Hardness testing of bearing metalsCompound materials
BS ISO 4384-1:2012. Plain bearings. Hardness testing of bearing metalsMultilayer bearings materials
BS ISO 4384-2:2011. Plain bearings. Hardness testing of bearing metalsSolid materials
BS ISO 4386-1:2012. Plain bearings. Metallic multilayer plain bearingsNon-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm
BS ISO 4386-2:2012. Plain bearings. Metallic multilayer plain bearingsDestructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
BS ISO 4387:2000+A1:2008. Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
BS ISO 4392-1:2002. Hydraulic fluid power. Determination of characteristics of motorsAt constant low speed and constant pressure
BS ISO 4392-2:2002. Hydraulic fluid power. Determination of characteristics of motorsStartability
BS ISO 4395:2009. Fluid power systems and components. Cylinder piston rod end types and dimensions
BS ISO 4397:2011. Fluid power connectors and associated components. Nominal outside diameters of tubes and nominal hose sizes
BS ISO 4401:1994. Hydraulic fluid power. Four-port directional control valves. Mounting surfaces
BS ISO 4401:2005. Hydraulic fluid power. Four-port directional control valves. Mounting surfaces
BS ISO 4404:1998. Petroleum and related products. Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems
BS ISO 4406:1999. Hydraulic fluid power. Fluids. Method for coding the level of contamination by solid particles
BS ISO 4407:2002. Hydraulic fluid power. Fluid contamination. Determination of particulate contamination by the counting method using an optical microscope
BS ISO 4409:2007. Hydraulic fluid power. Positive-displacement pumps, motors and integral transmissions. Methods of testing and presenting basic steady state performance
BS ISO 4411:2008. Hydraulic fluid power. Valves. Determination of pressure differential/flow characteristics
BS ISO 4413:1998. Hydraulic fluid power. General rules relating to systems
BS ISO 4414:1998. Pneumatic fluid power. General rules relating to systems
BS ISO 4427-1:2007. Plastics piping systems. Polyethylene (PE) pipes and fittings for water supplyGeneral
BS ISO 4427-2:2007. Plastics piping systems. Polyethylene (PE) pipes and fittings for water supplyPipes
BS ISO 4427-3:2007. Plastics piping systems. Polyethylene (PE) pipes and fittings for water supplyFittings
BS ISO 4433-1:1997, BS 2782-11:Method 1161A:1998. Thermoplastic pipes. Resistance to liquid chemicals. ClassificationImmersion test method
BS ISO 4433-2:1997, BS 2782-11:Method 1161B:1998. Thermoplastics pipes. Resistance to liquid chemicals. ClassificationPolyolefin pipes
BS ISO 4433-3:1997, BS 2782-11:Method 1161C:1998. Thermoplastic pipes. Resistance to liquid chemicals. ClassificationUnplasticized poly(vinyl chloride) (PVC-U), high-impact poly(vinyl chloride) (PVC-HI) and chlorinated poly(vinyl chloride) (PVC-C) pipes
BS ISO 4433-4:1997, BS 2782-11:Method 1161D:1998. Thermoplastics pipes. Resistance to liquid chemicals. ClassificationPoly(vinylidene fluoride) (PVDF) pipes
BS ISO 4437:2007. Buried polyethylene (PE) pipes for the supply of gaseous fuels. Metric series. Specifications
BS ISO 446:2004. Micrographics. ISO character and ISO test chart No 1. Description and use
BS ISO 4468:2009. Gear hobs. Accuracy requirements
BS ISO 4498:2005. Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness
BS ISO 4512:2000. Petroleum and liquid petroleum products. Equipment for measurement of liquid levels in storage tanks. Manual methods
BS ISO 4513:2010. Road vehicles. Visibility. Method for establishment of eyellipses for driver's eye location
BS ISO 4524-2:2000. Metallic coatings. Test methods for electrodeposited gold and gold alloy coatingsMixed flowing gas (MFG) environmental tests
BS ISO 4525:2003. Metallic coatings. Electroplated coatings of nickel plus chromium on plastics materials
BS ISO 4548-13:2013. Methods of test for full-flow lubricating oil filters for internal combustion enginesStatic burst pressure test for composite filter housings
BS ISO 4548-5:2013. Methods of test for full-flow lubricating oil filters for internal combustion enginesTest for cold start simulation and hydraulic pulse durability
BS ISO 4548-6:2012. Methods of test for full-flow lubricating oil filters for internal combustion enginesStatic burst pressure test
BS ISO 4548-7:2012. Methods of test for full-flow lubricating oil filters for internal combustion enginesVibration fatigue test
BS ISO 4548-9:2008. Methods of test for full-flow lubricating oil filters for internal combustion enginesInlet and outlet anti-drain valve tests
BS ISO 4575:2007. Plastics. Poly(vinyl chloride) pastes. Determination of apparent viscosity using the Severs rheometer
BS ISO 4587:2003. Adhesives. Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
BS ISO 4602:1997. Reinforcements. Woven fabrics. Determination of number of yarns per unit length of warp and weft
BS ISO 4602:2010. Reinforcements. Woven fabrics. Determination of number of yarns per unit length of warp and weft
BS ISO 4603:1993+A1:2010. Textile glass. Woven fabrics. Determination of thickness
BS ISO 4604:2011. Reinforcement fabrics. Determination of conventional flexural stiffness. Fixed-angle flexometer method
BS ISO 4606:1995. Textile glass. Woven fabric. Determination of tensile breaking force and elongation at break by the strip method
BS ISO 461-1:2003. Aircraft. Connectors for ground electrical suppliesDesign, performance and test requirements
BS ISO 4639-2:1995. Rubber tubing and hoses for fuel circuits for internal-combustion engines. SpecificationOxygenated fuels
BS ISO 4639-3:1995. Rubber tubing and hoses for fuel circuits for internal-combustion engines. SpecificationOxidized fuels
BS ISO 464:1995. Rolling bearings. Radial bearings with locating snap ring. Dimensions and tolerances
BS ISO 4647:2010. Rubber, vulcanized. Determination of static adhesion to textile cord. H-pull test
BS ISO 4649:2002. Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using a rotating cylindrical drum device
BS ISO 4649:2010. Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using a rotating cylindrical drum device
BS ISO 4650:2005. Rubber. Identification. Infrared spectrometric method
BS ISO 4650:2012. Rubber. Identification. Infrared spectrometric methods
BS ISO 4652:2012. Rubber compounding ingredients. Carbon black. Determination of specific surface area by nitrogen adsorption methods. Single-point procedures
BS ISO 4656:2007. Rubber compounding ingredients. Carbon black. Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN)
BS ISO 4656:2012. Rubber compounding ingredients. Carbon black. Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN)
BS ISO 4658:1999. Acrylonitrile-butadiene rubber (NBR). Evaluation procedure
BS ISO 4659:1997. Rubber, styrene-butadiene (carbon or carbon black and oil masterbatches). Evaluation procedure
BS ISO 4659:2003. Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches). Evaluation procedure
BS ISO 4660:1999. Rubber, raw natural. Colour index test
BS ISO 4660:2011. Rubber, raw natural. Colour index test
BS ISO 4662:2009. Rubber, vulcanized or thermoplastic. Determination of rebound resilience
BS ISO 4664:1998. Rubber. Guide to the determination of dynamic properties
BS ISO 4664-1:2005. Rubber, vulcanized or thermoplastic. Determination of dynamic propertiesGeneral guidance
BS ISO 4664-1:2011. Rubber, vulcanized or thermoplastic. Determination of dynamic propertiesGeneral guidance
BS ISO 4664-2:2006. Rubber, vulcanized or thermoplastic. Determination of dynamic propertiesTorsion pendulum methods at low frequencies
BS ISO 4665:1998. Rubber, vulcanized and thermoplastic. Resistance to weathering
BS ISO 4665:2006. Rubber, vulcanized or thermoplastic. Resistance to weathering
BS ISO 4666-1:2010. Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testingBasic principles
BS ISO 4666-3:2010. Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testingCompression flexometer (constant-strain type)
BS ISO 4666-4:2007. Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testingConstant-stress flexometer
BS ISO 4688-1:2006. Iron ores. Determination of aluminiumFlame atomic absorption spectrometric method
BS ISO 4689-2:2004. Iron ores. Determination of sulfur contentCombustion/titration method
BS ISO 4689-3:2004. Iron ores. Determination of sulfur contentCombustion/infrared method
BS ISO 4691:2009. Iron ores. Determination of titanium. Diantipyrylmethane spectrophotometric method
BS ISO 4695:1995. Iron ores. Determination of reducibility
BS ISO 4695:2007. Iron ores for blast furnace feedstocks. Determination of the reducibility by the rate of reduction index
BS ISO 4696-2:2007
BS ISO 4698:1994. Iron ore pellets. Determination of relative free-swelling index
BS ISO 4698:2007. Iron ore pellets for blast furnace feedstocks. Determination of the free-swelling index
BS ISO 4700:2007. Iron ore pellets for blast furnace and direct reduction feedstocks. Determination of the crushing strength
BS ISO 4701:2008. Iron ores and direct reduced iron. Determination of size distribution by sieving
BS ISO 4703:2001. Test conditions for surface grinding machines with two columns. Machines for grinding slideways. Testing of the accuracy
BS ISO 4706:2008. Gas cylinders. Refillable welded steel cylinders. Test pressure 60 bar and below
BS ISO 4708:2000. Composition cork. Gasket material. Test methods
BS ISO 4709:2000. Composition cork. Gasket material. Classification system, requirements, sampling, packing and marking
BS ISO 4710:2000. Cork. Cylindrical stoppers for sparkling wines and gasified wines. Characteristics
BS ISO 4714:2000. Composition cork. Specifications, sampling, packaging and marking
BS ISO 4715:1978. Essential oils. Quantitative evaluation of residue on evaporation
BS ISO 4716:2013. Essential oil of vetiver [Chrysopogon zizanioides (L.) Roberty, syn. Vet iveria zizanioides (L.) Nash]
BS ISO 4718:2004. Oil of lemongrass [Cymbopogon flexuosus (Nees ex Steudel) J.F. Watson]
BS ISO 4719:2012. Essential oil of spike lavender (Lavandula latifolia Medikus), Spanish type
BS ISO 472:1988. Plastics. Vocabulary
BS ISO 4720:1992. Essential oils. Nomenclature
BS ISO 4720:2009. Essential oils. Nomenclature
BS ISO 4724:2004. Oil of cedarwood, Virginian type (Juniperus virginiana L.)
BS ISO 4725:2004. Oil of cedarwood, Texas (Juniperus mexicana Schiede)
BS ISO 4728:2003. Oil of Spanish wild marjoram (Thymus mastichina L.)
BS ISO 4730:2004. Oil of Melaleuca, terpinen-4-ol type (Tea Tree oil)
BS ISO 4731:2006. Oil of geranium (Pelargonium X ssp.)
BS ISO 4731:2012. Essential oil of geranium (Pelargonium × ssp.)
BS ISO 4733:2004. Oil of cardamom [Elettaria cardamomum (L.) Maton]
BS ISO 4782:1987. Specification for metal wire for industrial wire screens and woven wire cloth
BS ISO 4795:1996. Laboratory glassware. Glass for thermometer bulbs
BS ISO 4798:1997. Laboratory glassware. Filter funnels
BS ISO 48:2007. Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS ISO 48:2010. Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS ISO 4800:1998. Laboratory glassware. Separating funnels and dropping funnels
BS ISO 4802-1:2010. Glassware. Hydrolytic resistance of the interior surfaces of glass containersDetermination by titration method and classification
BS ISO 4802-2:2010. Glassware. Hydrolytic resistance of the interior surfaces of glass containersDetermination by flame spectrometry and classification
BS ISO 4831:2006. Microbiology of food and animal feeding stuffs. Horizontal method for the detection and enumeration of coliforms. Most probable number technique
BS ISO 4832:2006. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of coliforms. Colony-count technique
BS ISO 4834:1997. Cinematography. Magnetic sound test films excluding striped release prints. Basic technical characteristics
BS ISO 486:1988. Cinematography. 16 mm motion-picture film perforated 8 mm Type R. Cutting and perforating dimensions
BS ISO 4866:2010. Mechanical vibration and shock. Vibration of fixed structures. Guidelines for the measurement of vibrations and evaluation of their effects on structures
BS ISO 487:1998. Steel roller chains, types S and C, attachments and sprockets
BS ISO 488:2008. Milk. Determination of fat content. Gerber butyrometers
BS ISO 4880:1993. Burning behaviour of textiles and textile products. Vocabulary
BS ISO 4880:1997. Burning behaviour of textiles and textile products. Vocabulary
BS ISO 4894-1:1990. Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materialsDesignation
BS ISO 490:1993. Cinematography. Magnetic stripes and magnetic recording head gaps for sound record on 16 mm motion-picture film perforated along one edge (Type 1). Positions and width dimensions
BS ISO 4900:2011. Textile glass. Mats and fabrics. Determination of contact mouldability
BS ISO 4901:2011. Reinforced plastics based on unsaturated-polyester resins. Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography
BS ISO 4902:1989. Information technology. Data communication. 37-pole DTE/DCE interface connector and contact number assignments
BS ISO 4903:1989. Information technology. Data communication. 15-pole DTE/DCE interface connector and contact number assignments
BS ISO 4909:2000. Bank cards. Magnetic stripe data content for track 3
BS ISO 491:1995. Cinematography. 35 mm motion-picture film and magnetic film. Cutting and perforating dimensions
BS ISO 491:2002. Cinematography. 35 mm motion-picture film and magnetic film. Cutting and perforating dimensions
BS ISO 4912:1981. Textiles. Cotton fibres. Evaluation of maturity. Microscopic method
BS ISO 4918:2009. Resilient, textile and laminate floor coverings. Castor chair test
BS ISO 4919:2012. Carpets. Determination of tuft withdrawal force
BS ISO 492:2002. Rolling bearings. Radial bearings. Tolerances
BS ISO 4921:1993. Knitting. Basic concepts. Vocabulary
BS ISO 4925:2005. Road vehicles. Specification of non-petroleum-base brake fluids for hydraulic systems
BS ISO 4926:2006. Road vehicles. Hydraulic braking systems. Non-petroleum-base reference fluids
BS ISO 4927:2005. Road vehicles. Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120°C max.)
BS ISO 4928:2006. Road vehicles. Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120°C max.)
BS ISO 4930:2006. Road vehicles. Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150°C max.)
BS ISO 4960:2007. Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 %
BS ISO 4965-1:2012. Metallic materials. Dynamic force calibration for uniaxial fatigue testingTesting systems
BS ISO 4965-2:2012. Metallic materials. Dynamic force calibration for uniaxial fatigue testingDynamic calibration device (DCD) instrumentation
BS ISO 4986:2010. Steel castings. Magnetic particle inspection
BS ISO 4987:2010. Steel castings. Liquid penetrant inspection
BS ISO 4992-1:2006. Steel castings. Ultrasonic examinationSteel castings for general purposes
BS ISO 4992-2:2006. Steel castings. Ultrasonic examinationSteel castings for highly stressed components
BS ISO 4993:2009. Steel and iron castings. Radiographic inspection
BS ISO 4997:2007. Cold-reduced carbon steel sheet of structural quality
BS ISO 4998:2005. Continuous hot-dip zinc-coated carbon steel sheet of structural quality
BS ISO 4998:2011. Continuous hot-dip zinc-coated carbon steel sheet of structural quality
BS ISO 4999:2005. Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
BS ISO 4999:2011. Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
BS ISO 500-1:2004. Agricultural tractors. Rear-mounted power take-offs. Types 1, 2 and 3General specifications, safety requirements, dimensions for master shield and clearance zone
BS ISO 500-2:2004. Agricultural tractors. Rear-mounted power take-off types 1, 2 and 3Narrow-track tractors, dimensions for master shield and clearance zone
BS ISO 500-3:2004. Agricultural tractors. Rear-mounted power take-off types 1, 2 and 3Main PTO dimensions and spline dimensions, location of PTO
BS ISO 5006:2006. Earth-moving machinery. Operator's field of view. Test method and performance criteria
BS ISO 5007:2003. Agricultural wheeled tractors. Operator's seat. Laboratory measurement of transmitted vibration
BS ISO 5008:2002. Agricultural wheeled tractors and field machinery. Measurement of whole-body vibration of the operator
BS ISO 501:2012. Hard coal. Determination of the crucible swelling number
BS ISO 5011:2000. Inlet air cleaning equipment for internal combustion engines and compressors. Performance testing
BS ISO 5024:1999. Petroleum liquids and liquefied petroleum gases. Measurement. Standard reference conditions
BS ISO 5025:1997. Reinforcement products. Woven fabrics. Determination of width and length
BS ISO 5057:1993. Industrial trucks. Inspection and repair of fork arms in service on fork-lift trucks
BS ISO 5061:2002. Animal feeding stuffs. Determination of castor oil seed husks. Microscope method
BS ISO 5068-1:2007. Brown coals and lignites. Determination of moisture contentIndirect gravimetric method for total moisture
BS ISO 5068-2:2007. Brown coals and lignites. Determination of moisture contentIndirect gravimetric method for moisture in the analysis sample
BS ISO 5071-1:2013. Brown coals and lignites. Determination of the volatile matter in the analysis sampleTwo-furnace method
BS ISO 5072:2013. Brown coals and lignites. Determination of true relative density and apparent relative density
BS ISO 5073:2013. Brown coals and lignites. Determination of humic acids
BS ISO 509:1996. Pallet trucks. Principal dimensions
BS ISO 5-1:2009. Photography and graphic technology. Density measurementsGeometry and functional notation
BS ISO 5129:2001+A1:2013. Acoustics. Measurement of sound pressure levels in the interior of aircraft during flight
BS ISO 513:2004. Classification and application of cutting materials for metal removal with defined cutting edges. Designation of the main groups and groups of application
BS ISO 513:2012. Classification and application of hard cutting materials for metal removal with defined cutting edges. Designation of the main groups and groups of application
BS ISO 5130:2007+A1:2012. Acoustics. Measurements of sound pressure level emitted by stationary road vehicles
BS ISO 5131:1996. Acoustics. Tractors and machinery for agriculture and forestry. Measurement of noise at the operator's position. Survey method
BS ISO 5145:2004+A2:2008. Cylinder valve outlets for gases and gas mixtures. Selection and dimensioning
BS ISO 5151:2010. Non-ducted air conditioners and heat pumps. Testing and rating for performance
BS ISO 516:1999. Photography. Camera shutters. Timing
BS ISO 5168:2005. Measurement of fluid flow. Procedures for the evaluation of uncertainties
BS ISO 517:2008. Photography. Apertures and related properties pertaining to photographic lenses. Designations and measurements
BS ISO 5-2:2009. Photography and graphic technology. Density measurementsGeometric conditions for transmittance density
BS ISO 5208:2008. Industrial valves. Pressure testing of metallic valves
BS ISO 521:2011. Machine chucking reamers with cylindrical shanks and Morse taper shanks
BS ISO 5243:2004. Textile machinery and accesories. Numbering of heald frames and drop wire bars in a loom
BS ISO 5248:2003. Textile machinery and accessories. Dyeing and finishing machinery. Vocabulary of ancillary devices
BS ISO 525:1999. Bonded abrasive products. General requirements
BS ISO 525:2013. Bonded abrasive products. General requirements
BS ISO 5250:2003. Textile machinery and accessories. Dyeing and finishing machinery. Terms for tentering and heat-treatment machinery
BS ISO 5269-3:2008. Pulps. Preparation of laboratory sheets for physical testingConventional and Rapid-Köthen sheet formers using a closed water system
BS ISO 5270:1998. Pulps. Laboratory sheets. Determination of physical properties
BS ISO 5285:2004. Conveyor belts. Guidelines for storage and handling
BS ISO 5285:2012. Conveyor belts. Guidelines for storage and handling
BS ISO 5287:2003. Belt drives. Narrow V-belts for the automotive industry. Fatigue test
BS ISO 5288:2001. Synchronous belt drives. Vocabulary
BS ISO 5290:2001. Belt drives. Grooved pulleys for narrow V-belts. Groove sections 9N/J, 15N/J and 25N/J (effective system)
BS ISO 5291:2011. Belt drives. Grooved pulleys for joined classical V-belts. Groove sections AJ, BJ, CJ and DJ (effective system)
BS ISO 5293:2004. Conveyor belts. Determination of minimum transition distance on three idler rollers
BS ISO 5294:2012. Synchronous belt drives. Pulleys
BS ISO 5296:2012. Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH. Metric and inch dimensions
BS ISO 5-3:1995. Photography. Density measurementsSpectral conditions
BS ISO 53:1998. Cylindrical gears for general and heavy engineering. Standard basic rack tooth profile
BS ISO 5-3:2009. Photography and graphic technology. Density measurementsSpectral conditions
BS ISO 5344:2004. Electrodynamic vibration generating systems. Performance characteristics
BS ISO 5348:1998. Mechanical vibration and shock. Mechanical mounting of accelerometers
BS ISO 5350-3:1997. Pulps. Estimation of dirt and shives.Inspection by reflected light
BS ISO 5350-3:2007. Pulps. Estimation of dirt and shivesVisual inspection by reflected light using equivalent black area (EBA) method
BS ISO 5350-4:2006. Pulps. Estimation of dirt and shivesInstrumental inspection by reflected light using equivalent black area (EBA) method
BS ISO 5351:2004. Pulps. Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
BS ISO 5351:2010. Pulps. Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
BS ISO 5389:2005. Turbocompressors. Performance test code
BS ISO 5391:2003. Pneumatic tools and machines. Vocabulary
BS ISO 5-4:1995. Photography. Density measurementsGeometric conditions for reflection density
BS ISO 54:1996. Cylindrical gears for general engineering and for heavy engineering. Modules
BS ISO 5-4:2009. Photography and graphic technology. Density measurementsGeometric conditions for reflection density
BS ISO 540:2008. Hard coal and coke. Determination of ash fusibility
BS ISO 5408:2009. Screw threads. Vocabulary
BS ISO 5414-1:2002. Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank toolsDimensions of the driving system of tool shanks
BS ISO 5414-2:2002. Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank toolsConnecting dimensions of chucks and designation
BS ISO 5415:2007. Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
BS ISO 5416:1997. Direct reduced iron. Determination of metallic iron content. Bromide-methanol titrimetric method
BS ISO 5416:2006. Direct reduced iron. Determination of metallic iron. Bromine-methanol titrimetric method
BS ISO 5418-1:1994. Iron ores. Determination of copper content.2,2'-Biquinolyl spectrophotometric method
BS ISO 5418-1:2006. Iron ores. Determination of copper2,2'-Biquinolyl spectrophotometric method
BS ISO 5418-2:2006. Iron ores. Determination of copperFlame atomic absorption spectrometric method
BS ISO 5426-2:1996. Information and documentation. Extension of the Latin alphabet coded character set for bibliographic information interchangeLatin characters used in minor European languages and obsolete typography
BS ISO 5429:2005. Coated abrasives. Flap wheels with incorporated flanges or separate flanges
BS ISO 5429:2012. Coated abrasives. Flap wheels with incorporated flanges or separate flanges
BS ISO 543:1990. Photography. Photographic films. Specifications for safety film
BS ISO 5431:1999. Leather. Wet blue goat skins. Specification
BS ISO 5431:2013. Leather. Wet blue goat skins. Specification
BS ISO 5432:2013. Leather. Wet blue sheep skins. Specification
BS ISO 5433:1999. Leather. Bovine wet blue. Specification
BS ISO 5433:2013. Leather. Bovine wet blue. Specification
BS ISO 5435:2008. Rubber compounding ingredients. Carbon black. Determination of tinting strength
BS ISO 5456-4:1996. Technical drawings. Projection methodsCentral projection
BS ISO 5459:1981. Technical drawings. Geometrical tolerancing. Datums and datum-systems for geometrical tolerances
BS ISO 5466:1996. Photography. Processed safety photographic films. Storage practices
BS ISO 5468:2006. Rotary and rotary impact masonry drill bits with hardmetal tips. Dimensions
BS ISO 5473:1997. Rubber or plastics-coated fabrics. Determination of crush resistance
BS ISO 5480:1979. Shipbuilding. Guardrails for cargo ships
BS ISO 5483:2003. Ships and marine technology. Drain facilities from oil and water tanks
BS ISO 5489:2008. Ships and marine technology. Embarkation ladders
BS ISO 5496:2006. Sensory analysis. Methodology. Initiation and training of assessors in the detection and recognition of odours
BS ISO 5507:2002. Oilseeds, vegetable oils and fats. Nomenclature
BS ISO 5518:2007. Fruits, vegetables and derived products. Determination of benzoic acid content. Spectrophotometric method
BS ISO 5530-4:2002. Wheat flour (Triticum aestivum L.). Physical characteristics of doughsDetermination of rheological properties using an alveograph
BS ISO 5536:2002. Milk fat products. Determination of water content. Karl Fischer method
BS ISO 5536:2009. Milk fat products. Determination of water content. Karl Fischer method
BS ISO 5538:2004. Milk and milk products. Sampling. Inspection by attributes
BS ISO 5543:2004. Caseins and caseinates. Determination of fat content. Gravimetric method (reference method)
BS ISO 5544:2008. Caseins. Determination of "fixed ash" (Reference method)
BS ISO 5545:2008. Rennet caseins and caseinates. Determination of ash (Reference method)
BS ISO 5546:2010. Caseins and caseinates. Determination of pH (Reference method)
BS ISO 5547:2008. Caseins. Determination of free acidity (Reference method)
BS ISO 5548:2004. Caseins and caseinates. Determination of lactose content. Photometric methods
BS ISO 5550:2006. Caseins and caseinates. Determination of moisture content (Reference method)
BS ISO 5593:1997. Rolling bearings. Vocabulary
BS ISO 5596:1999. Hydraulic fluid power. Gas-loaded accumulators with separator. Ranges of pressures and volumes and characteristic quantities
BS ISO 5597:2010. Hydraulic fluid power. Cylinders. Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
BS ISO 5598:2008. Fluid power systems and components. Vocabulary
BS ISO 5599-1:2001. Pneumatic fluid power. Five-port directional control valvesMounting interface surfaces without electrical connector
BS ISO 5599-2:2001. Pneumatic fluid power. Five-port directional control valvesMounting interface surfaces with optional electrical connector
BS ISO 5600:2007. Rubber. Determination of adhesion to rigid materials using conical shaped parts
BS ISO 5600:2011. Rubber. Determination of adhesion to rigid materials using conical shaped parts
BS ISO 5603:2007. Rubber, vulcanized. Determination of adhesion to wire cord
BS ISO 5603:2011. Rubber, vulcanized. Determination of adhesion to wire cord
BS ISO 5608:2012. Turning and copying tool holders and cartridges for indexable inserts. Designation
BS ISO 5609-1:2012. Tool holders for internal turning with cylindrical shank for indexable insertsDesignation, styles, dimensions and calculation for corrections
BS ISO 5609-2:2012. Tool holders for internal turning with cylindrical shank for indexable insertsStyle F
BS ISO 5609-3:2012. Tool holders for internal turning with cylindrical shank for indexable insertsStyle K
BS ISO 5609-4:2012. Tool holders for internal turning with cylindrical shank for indexable insertsStyle L
BS ISO 5609-5:2012. Tool holders for internal turning with cylindrical shank for indexable insertsStyle U
BS ISO 5609-6:2012. Tool holders for internal turning with cylindrical shank for indexable insertsStyle Q
BS ISO 5610-1:2010. Tool holders with rectangular shank for indexable insertsGeneral survey, correlation and determination of dimensions
BS ISO 5610-10:2010. Tool holders with rectangular shank for indexable insertsStyle N
BS ISO 5610-11:2010. Tool holders with rectangular shank for indexable insertsStyle R
BS ISO 5610-12:2010. Tool holders with rectangular shank for indexable insertsStyle S
BS ISO 5610-13:2010. Tool holders with rectangular shank for indexable insertsStyle T
BS ISO 5610-14:2010. Tool holders with rectangular shank for indexable insertsStyle H
BS ISO 5610-15:2010. Tool holders with rectangular shank for indexable insertsStyle V
BS ISO 5610-2:2010. Tool holders with rectangular shank for indexable insertsStyle A
BS ISO 5610-3:2010. Tool holders with rectangular shank for indexable insertsStyle B
BS ISO 5610-4:2010. Tool holders with rectangular shank for indexable insertsStyle D
BS ISO 5610-5:2010. Tool holders with rectangular shank for indexable insertsStyle F
BS ISO 5610-6:2010. Tool holders with rectangular shank for indexable insertsStyle G
BS ISO 5610-7:2010. Tool holders with rectangular shank for indexable insertsStyle J
BS ISO 5610-8:2010. Tool holders with rectangular shank for indexable insertsStyle K
BS ISO 5610-9:2010. Tool holders with rectangular shank for indexable insertsStyle L
BS ISO 562:2010. Hard coal and coke. Determination of volatile matter
BS ISO 5626:1993. Paper. Determination of folding endurance
BS ISO 5628:2012. Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS ISO 5630-5:2008. Paper and board. Accelerated ageingExposure to elevated temperature at 100 °C
BS ISO 5630-6:2009. Paper and board. Accelerated ageingExposure to atmospheric pollution (nitrogen dioxide)
BS ISO 5631:2000. Paper and board. Determination of colour (C/2°). Diffuse reflectance method
BS ISO 5631-1:2009. Paper and board. Determination of colour by diffuse reflectanceIndoor daylight conditions (C/2°)
BS ISO 5631-2:2008. Paper and board. Determination of colour by diffuse reflectanceOutdoor daylight conditions (D65/10°)
BS ISO 5631-3:2008. Paper and board. Determination of colour by diffuse reflectanceIndoor illumination conditions (D50/2°)
BS ISO 5636-4:2005. Paper and board. Determination of air permeance (medium range)Sheffield method
BS ISO 5636-5:2003. Paper and board. Determination of air permeance and air resistance (medium range)Gurley method
BS ISO 5652:1984, EN 25652:1991. Information processing. 9-track, 12,7 mm (0.5 in) wide magnetic tape for information interchange. Format and recording, using group coding at 246 cpmm (6250 cpi)
BS ISO 5655:1993. Photography. Film dimensions. Industrial radiography
BS ISO 5655:2000. Photography. Industrial radiographic films (roll and sheet) and metal intensifying screens. Dimensions
BS ISO 5658-2:1996. Reaction to fire tests. Spread of flameLateral spread on building products in vertical configuration
BS ISO 5658-2:2006+A1:2011. Reaction to fire tests. Spread of flameLateral spread on building and transport products in vertical configuration
BS ISO 5658-4:2001. Reaction to fire tests. Spread of flameIntermediate-scale test of vertical spread of flame with vertically oriented specimen
BS ISO 5659-2:1994. Plastics. Smoke generationDetermination of specific optical density
BS ISO 5667-11:2009, BS 6068-6.11:2009. Water quality. SamplingGuidance on sampling of groundwaters
BS ISO 5667-17:2000, BS 6068-6.17:2000. Water quality. SamplingGuidance on sampling of suspended sediments
BS ISO 5667-17:2008. Water quality. SamplingGuidance on sampling of bulk suspended solids
BS ISO 5667-18:2001, BS 6068-6.18:2001. Water quality. SamplingGuidance on sampling of groundwater at contaminated sites
BS ISO 5667-20:2008. Water quality. SamplingGuidance on the use of sampling data for decision making. Compliance with thresholds and classification systems
BS ISO 5667-21:2010. Water quality. SamplingGuidance on sampling of drinking water distributed by tankers or means other than distribution pipes
BS ISO 5667-22:2010. Water quality. SamplingGuidance on the design and installation of groundwater monitoring points
BS ISO 5667-5:2006. Water quality. SamplingGuidance on sampling of drinking water from treatment works and piped distribution systems
BS ISO 5667-6:2005. Water quality. SamplingGuidance on sampling of rivers and streams
BS ISO 5675:2008. Agricultural tractors and machinery. General purpose quick-action hydraulic couplers
BS ISO 5681:1992. Equipment for crop protection. Vocabulary
BS ISO 5687:1999. Equipment for harvesting. Combine harvesters. Determination and designation of grain tank capacity and unloading device performance
BS ISO 5692-3:2011. Agricultural vehicles. Mechanical connections on towed vehiclesSwivel hitch rings
BS ISO 5700:2006. Wheeled tractors for agriculture and forestry. Roll-over protective structures (ROPS). Static test method and acceptance conditions
BS ISO 5700:2013. Tractors for agriculture and forestry. Roll-over protective structures. Static test method and acceptance conditions
BS ISO 5702:1983. Equipment for harvesting. Combine harvester component parts. Equivalent terms
BS ISO 5707:1996. Milking machine installations. Construction and performance
BS ISO 5707:2007. Milking machine installations. Construction and performance
BS ISO 5715:1983. Equipment for harvesting. Dimensional compatibility of forage harvesting machinery
BS ISO 5718:2002. Harvesting equipment. Blades for agricultural rotary mowers. Requirements
BS ISO 5721:1989. Tractors for agriculture. Operator's field of vision
BS ISO 5721-1:2013. Agricultural tractors. Requirements, test procedures and acceptance criteria for the operator’s field of visionField of vision to the front
BS ISO 5725-1:1994. Accuracy (trueness and precision) of measurement methods and resultsGeneral principles and definitions
BS ISO 5725-2:1994. Accuracy (trueness and precision) of measurement methods and resultsBasic methods for the determination of repeatability and reproducibility of a standard measurement method
BS ISO 5725-3:1994. Accuracy (trueness and precision) of measurement methods and resultsIntermediate measures of the precision of a standard measurement method
BS ISO 5725-4:1994. Accuracy (trueness and precision) of measurement methods and resultsBasic methods for the determination of the trueness of a standard measurement method
BS ISO 5725-5:1998. Accuracy (trueness and precision) of measurement methods and resultsAlternative methods for the determination of the precision of a standard measurement method
BS ISO 5725-6:1994. Accuracy (trueness and precision) of measurement methods and resultsUse in practice of accuracy values
BS ISO 5738:2004. Milk and milk products. Determination of copper content. Photometric method. (Reference method)
BS ISO 5739:2003. Caseins and caseinates. Determination of contents of scorched particles and of extraneous matter
BS ISO 5742:2004. Pliers and nippers. Nomenclature
BS ISO 5743:2004. Pliers and nippers. General technical requirements
BS ISO 5744:2004. Pliers and nippers. Methods of test
BS ISO 5745:2004. Pliers and nippers. Pliers for gripping and manipulating. Dimensions and test values
BS ISO 5746:2004. Pliers and nippers. Engineer's and "Lineman's" pliers. Dimensions and test values
BS ISO 5748:2004. Pliers and nippers. End cutting nippers. Dimensions and test values
BS ISO 5749:2004. Pliers and nippers. Diagonal cutting nippers. Dimensions and test values
BS ISO 5751-1:2004. Motorcycle tyres and rims (metric series)Design guides
BS ISO 5751-1:2010. Motorcycle tyres and rims (metric series)Design guides
BS ISO 5751-2:2004. Motorcycle tyres and rims (metric series)Tyre dimensions and load-carrying capacities
BS ISO 5751-2:2010. Motorcycle tyres and rims (metric series)Tyre dimensions and load-carrying capacities
BS ISO 5751-3:2004. Motorcycle tyres and rims (metric series)Range of approved rim contours
BS ISO 5751-3:2010. Motorcycle tyres and rims (metric series)Range of approved rim contours
BS ISO 5753-1:2009. Rolling bearings. Internal clearanceRadial internal clearance for radial bearings
BS ISO 5753-2:2010. Rolling bearings. Internal clearanceAxial internal clearance for four-point-contact ball bearings
BS ISO 5758:2002. Cinematography. Labelling of containers for motion-picture film and magnetic material. Minimum information for exchange of materials
BS ISO 5765-1:2002. Dried milk, dried ice-mixes and processed cheese. Determination of lactose contentEnzymatic method utilizing the glucose moiety of the lactose
BS ISO 5765-2:2002. Dried milk, dried ice-mixes and processed cheese. Determination of lactose contentEnzymatic method utilizing the galactose moiety of the lactose
BS ISO 5766:1990. Pallet stackers and high-lift platform trucks. Stability tests
BS ISO 5768:1996. Cinematography. Image produced by camera aperture type W on 16 mm motion-picture film. Position and dimensions
BS ISO 5768:1998. Cinematography. Image produced by camera aperture type W on 16 mm motion-picture film. Position and dimensions
BS ISO 5781:2000. Hydraulic fluid power. Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces
BS ISO 5782-1:1997. Pnuematic fluid power. Compressed air filters.Main characteristics to be included in supplier's literature and product-marking requirements
BS ISO 5782-2:1997. Pnuematic fluid power. Compressed air filters.Test methods to determine the main characteristics to be included in supplier's literature
BS ISO 579:2013. Coke. Determination of total moisture
BS ISO 5794-1:2005. Rubber compounding ingredients. Silica, precipitated, hydratedNon-rubber tests
BS ISO 5794-1:2010. Rubber compounding ingredients. Silica, precipitated, hydratedNon-rubber tests
BS ISO 5794-3:2011. Rubber compounding ingredients. Silica, precipitated, hydratedEvaluation procedures in a blend of solution styrene-butadiene rubber (S-SBR) and butadiene rubber (BR)
BS ISO 5796:2000. Rubber compounding ingredients. Natural calcium carbonate. Test methods
BS ISO 5797:2004. Ships and marine technology. Windows and side scuttles for fire-resistant constructions
BS ISO 5799:1991. Photography. Direct-exposing medical and dental radiographic film/process systems. Determination of ISO speed and ISO average gradient
BS ISO 5800:1987. Photography. Colour negative films for still photography. Determination of ISO speed
BS ISO 5805:1997. Mechanical vibration and shock. Human exposure. Vocabulary
BS ISO 582:1995+A1:2013. Rolling bearings. Chamfer dimensions. Maximum values
BS ISO 5832-1:2007. Implants for surgery. Metallic materialsWrought stainless steel
BS ISO 5832-12:2007. Implants for surgery. Metallic materialsWrought cobalt-chromium-molybdenum alloy
BS ISO 5832-14:2007. Implants for surgery. Metallic materialsWrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy
BS ISO 5832-5:2005. Implants for surgery. Metallic materialsWrought cobalt-chromium-tungsten-nickel alloy
BS ISO 5832-9:2007. Implants for surgery. Metallic materialsWrought high nitrogen stainless steel
BS ISO 5833:2002. Implants for surgery. Acrylic resin cements
BS ISO 5834-1:1998. Implants for surgery. Ultra-high molecular weight polyethylenePowder form
BS ISO 5834-1:2005. Implants for surgery. Ultra-high-molecular-weight polyethylenePowder form
BS ISO 5834-2:1998. Implants for surgery. Ultra-high molecular weight polyethyleneMoulded forms
BS ISO 5834-2:2006. Implants for surgery. Ultra-high-molecular-weight polyethyleneMoulded forms
BS ISO 5834-2:2011. Implants for surgery. Ultra-high-molecular-weight polyethyleneMoulded forms
BS ISO 5834-3:2005. Implants for surgery. Ultra-high-molecular-weight polyethyleneAccelerated ageing methods
BS ISO 5834-4:2005. Implants for surgery. Ultra-high molecular weight polyethyleneOxidation index measurement method
BS ISO 5834-5:2005. Implants for surgery. Ultra-high molecular weight polyethyleneMorphology assessment method
BS ISO 5838-1:2013. Implants for surgery. Metallic skeletal pins and wiresGeneral requirements
BS ISO 5841-2:2000. Implants for surgery. Cardiac pacemakersReporting of clinical performance of populations of pulse generators or leads
BS ISO 5856:2008. Aerospace. Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
BS ISO 5857:2008. Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1250 MPa. Procurement specification
BS ISO 5892:2013. Rubber building gaskets. Materials for preformed solid vulcanized structural gaskets. Specification
BS ISO 5893:2002. Rubber and plastics test equipment. Tensile, flexural and compression types (constant rate of traverse). Specification
BS ISO 5894:1999. Ships and marine technology. Manholes with bolted covers
BS ISO 5902:2013. Alpine skis. Determination of elastic properties
BS ISO 592:1998. Essential oils. Determination of optical rotation
BS ISO 5940-2:2007. Carbonaceous materials used in the production of aluminium. Pitch for electrodesDetermination of the softening point (Mettler softening point method)
BS ISO 5943:2004. Cheese and processed cheese products. Determination of chloride content. Potentiometric titration method
BS ISO 5950:2008. Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
BS ISO 5950:2012. Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
BS ISO 5952:2005. Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
BS ISO 5952:2011. Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
BS ISO 5954:2007. Cold-reduced carbon steel sheet according to hardness requirements
BS ISO 5984:2002. Animal feeding stuffs. Determination of crude ash
BS ISO 5985:2002. Animal feeding stuffs. Determination of ash insoluble in hydrochloric acid
BS ISO 5989:1995. Photography. Pre-packaged chemicals for the processing of silver halide based photographic materials. Vocabulary
BS ISO 5990:1996. Photography. Processing chemicals. Specifications for potassium sulfite, 650 g/l aqueous solution
BS ISO 5990:2000. Photography. Processing chemicals. Specifications for potassium sulfite, 650 g/l solution
BS ISO 5991:1979. Essential oils. Determination of residue content from distillation under reduced pressure
BS ISO 6:1993. Photography. Black-and-white pictorial still camera negative film/process systems. Determination of ISO speed
BS ISO 6016:2008. Earth-moving machinery. Methods of measuring the masses of whole machines, their equipment and components
BS ISO 6020-1:1998. Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) seriesMedium series
BS ISO 6020-1:2007. Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) seriesMedium series
BS ISO 6020-2:1991. Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) seriesCompact series
BS ISO 6020-2:2006. Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) seriesCompact series
BS ISO 6020-3:1994. Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) seriesCompact series with bores from 250 mm to 500 mm
BS ISO 6022:1981. Hydraulic fluid power. Single rod cylinders. Mounting dimensions. 250 bar (25 000 kPa) series
BS ISO 6022:2006. Hydraulic fluid power. Mounting dimensions for single rod cylinders, 25M Pa (250 bar) series
BS ISO 6025:1993. Cinematography. Photographic sound test films, 35 mm and 16 mm. Specifications
BS ISO 6025:2000. Cinematography. Analogue photographic sound test films, 35 mm and 16mm. Specifications
BS ISO 603-1:1999. Bonded abrasive products. DimensionsGrinding wheels for external cylindrical grinding between centres
BS ISO 603-10:1999. Bonded abrasive products. DimensionsStones for honing and superfinishing
BS ISO 603-11:1999. Bonded abrasive products. DimensionsHand finishing sticks
BS ISO 603-12:1999. Bonded abrasive products. DimensionsGrinding wheels for deburring and fettling on a straight grinder
BS ISO 603-13:1999. Bonded abrasive products. DimensionsGrinding wheels for deburring and fettling on a vertical grinder
BS ISO 603-14:1999. Bonded abrasive products. DimensionsGrinding wheels for deburring and fettling/snagging on an angle grinder
BS ISO 603-15:1999. Bonded abrasive products. DimensionsGrinding wheels for cutting-off on stationary or mobile cutting-off machines
BS ISO 603-16:1999. Bonded abrasive products. DimensionsGrinding wheels for cutting-off on hand-held power tools
BS ISO 603-18:2013. Bonded abrasive products. DimensionsGrinding wheels for flat glass edge grinding machines
BS ISO 603-2:1999. Bonded abrasive products. DimensionsGrinding wheels for centreless external cylindrical grinding
BS ISO 603-3:1999. Bonded abrasive products. DimensionsGrinding wheels for internal cylindrical grinding
BS ISO 603-4:1999. Bonded abrasive products. DimensionsGrinding wheels for surface grinding/peripheral grinding
BS ISO 603-5:1999. Bonded abrasive products. DimensionsGrinding wheels for surface grinding/face grinding
BS ISO 6036:1996. Cinematography. Colour motion-picture prints and slides for television. Density specifications
BS ISO 603-6:1999. Bonded abrasive products. DimensionsGrinding wheels for tool and toolroom grinding
BS ISO 603-7:1999. Bonded abrasive products. DimensionsGrinding wheels for manually guided grinding
BS ISO 6038:1993. Cinematography. Splices for use on 70 mm, 65 mm, 35 mm and 16 mm motion-picture films. Dimensions and locations
BS ISO 603-8:1999. Bonded abrasive products. DimensionsGrinding wheels for deburring and fettling/snagging
BS ISO 603-9:1999. Bonded abrasive products. DimensionsGrinding wheels for high pressure grinding
BS ISO 6051:1992. Photography. Processed photographic paper prints. Storage practices
BS ISO 6051:1997. Photography. Processed reflection prints. Storage practices
BS ISO 6055:1997. High-lift rider trucks. Overhead guards. Specification and testing
BS ISO 6055:2004. Industrial trucks. Overhead guards. Specification and testing
BS ISO 6072:2002. Hydraulic fluid power. Compatibility between fluids and standard elastomeric materials
BS ISO 6072:2011. Rubber. Compatibility between hydraulic fluids and standard elastomeric materials
BS ISO 6073:1997. Petroleum products. Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems
BS ISO 6077:1993. Photography. Photographic films and papers. Wedge test for brittleness
BS ISO 6091:2010. Dried milk. Determination of titratable acidity (Reference method)
BS ISO 6099:2001. Fluid power systems and components. Cylinders. Identification code for mounting dimensions and mounting types
BS ISO 6099:2009. Fluid power systems and components. Cylinders. Identification code for mounting dimensions and mounting types
BS ISO 6101-5:2006. Rubber. Determination of metal content by atomic absorption spectrometryDetermination of iron content
BS ISO 6101-6:2011. Rubber. Determination of metal content by atomic absorption spectrometryDetermination of magnesium content
BS ISO 6104:2005. Superabrasive products. Rotating grinding tools with diamond or cubic boron nitride. General survey, designation and multilingual nomenclature
BS ISO 6105-1:2004. Blanks for superabrasive cutting-off wheelsManually guided cutting-off in building and civil engineering
BS ISO 6105-2:2004. Blanks for superabrasive cutting-off wheelsHand-held cutting-off in building and civil engineering
BS ISO 6106:2005. Abrasive products. Checking the grit size of superabrasives
BS ISO 6106:2013. Abrasive products. Checking the grain size of superabrasives
BS ISO 6107-1:2004, BS 6068-1.1:2004. Water quality. VocabularyPart 1
BS ISO 6107-2:2006+A1:2012, BS 6068-1.2:2006. Water quality. VocabularyPart 2
BS ISO 6107-3:1993, BS 6068-1.3:1993. Water quality. VocabularyPart 3
BS ISO 6107-5:2004, BS 6068-1.5:2004. Water quality. VocabularyPart 5
BS ISO 6107-6:2004, BS 6068-1.6:2004. Water quality. VocabularyPart 6
BS ISO 6107-7:2006, BS 6068-1.7:2006. Water quality. VocabularyPart 7
BS ISO 6107-8:1993. Water quality. VocabularyPart 8
BS ISO 611:2003. Road vehicles. Braking of automotive vehicles and their trailers. Vocabulary
BS ISO 6117:2005. Road vehicles. Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 °C max.)
BS ISO 6118:2006. Road vehicles. Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70°C max.)
BS ISO 6133:1998. Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
BS ISO 614:2012. Ships and marine technology. Toughened safety glass panes for rectangular windows and side scuttles. Punch method of non-destructive strength testing
BS ISO 6145-2:2001. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methodsVolumetric pumps
BS ISO 6145-5:2001. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methodsCapillary calibration devices
BS ISO 6145-7:2001. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methodsThermal mass-flow controllers
BS ISO 6145-9:2001. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methodsSaturation method
BS ISO 6148:2001. Photography. Micrographic films, spools and cores. Dimensions
BS ISO 6149-1:1993. Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealingPorts with O-ring in truncated housing
BS ISO 6149-2:1993. Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealingHeavy-duty (S series) stud ends. Dimensions, design, test methods and requirements.
BS ISO 6149-3:1993. Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealingLight-duty (L series) stud ends. Dimensions, design, test methods and requirements
BS ISO 6149-4:2006. Connections for fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealingDimensions, design, test methods and requirements for external and internal hex port plugs
BS ISO 6155:1998. Machine tools. Test conditions for horizontal spindle turret and single spindle automatic lathes. Testing of the accuracy
BS ISO 6162-1:2002. Hydraulic fluid power. Flange connectors with split or one-piece flange clamps and metric or inch screwsFlange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
BS ISO 6162-1:2012. Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screwsFlange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
BS ISO 6162-2:2002. Hydraulic fluid power. Flange connectors with split or one-piece flange clamps and metric or inch screwsFlange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51
BS ISO 6162-2:2012. Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screwsFlange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
BS ISO 6166:2001. Securities and related financial instruments. International securities identification numbering system (ISIN)
BS ISO 6166:2013. Securities and related financial instruments. International securities identification numbering system (ISIN)
BS ISO 6194-1:2007. Rotary shaft lip-type seals incorporating elastomeric sealing elementsNominal dimensions and tolerances
BS ISO 6194-2:2009. Rotary shaft lip-type seals incorporating elastomeric sealing elementsVocabulary
BS ISO 6194-3:2009. Rotary shaft lip-type seals incorporating elastomeric sealing elementsStorage, handling and installation
BS ISO 6194-4:1999. Rotary shaft lip type sealsPerformance test procedures
BS ISO 6194-4:2009. Rotary shaft lip-type seals incorporating elastomeric sealing elementsPerformance test procedures
BS ISO 6194-5:2008. Rotary-shaft lip-type seals incorporating elastomeric sealing elementsIdentification of visual imperfections
BS ISO 6195:2002. Fluid power systems and components. Cylinder-rod wiper-ring housings in reciprocating applications. Dimensions and tolerances
BS ISO 6195:2013. Fluid power systems and components. Cylinder-rod wiper-ring housings in reciprocating applications. Dimensions and tolerances
BS ISO 6196-1:1993. Micrographics. VocabularyGeneral terms
BS ISO 6196-10:1999. Micrographics. VocabularyIndex
BS ISO 6196-2:1993. Micrographics. VocabularyImage positions and methods of recording
BS ISO 6196-3:1997. Micrographics. VocabularyFilm processing
BS ISO 6196-4:1998. Micrographics. VocabularyMaterials and packaging
BS ISO 6196-5:1987. Micrographics. VocabularyQuality of images, legibility, inspection
BS ISO 6196-6:1992. Micrographics. VocabularyEquipment
BS ISO 6196-7:1992. Micrographics. VocabularyComputer micrographics
BS ISO 6198:1993. Micrographics. Readers for transparent microforms. Performance characteristics
BS ISO 6199:1991. Micrographics. Microfilming of documents on 16 mm and 35 mm silver-gelatin type microfilm. Operating procedures
BS ISO 6199:2005. Micrographics. Microfilming of documents on 16 mm and 35 mm silver-gelatin type microfilm. Operating procedures
BS ISO 6200:1991. Micrographics. First generation silver-gelatin microforms of source documents. Density specifications
BS ISO 6200:1999. Micrographics. First generation silver-gelatin microforms of source documents. Density specifications and method of measurement
BS ISO 6209:2009. Rubber compounding ingredients. Carbon black. Determination of solvent-extractable material
BS ISO 6221:1996. Photography. Films and papers. Determination of dimensional change
BS ISO 6237:2003. Adhesives. Wood-to-wood adhesive bonds. Determination of shear strength by tensile loading
BS ISO 6243:1997. Climatic data for building design. Proposed system of symbols
BS ISO 6261:2011. Tool holders with cylindrical shank (boring bars) for indexable inserts. Designation
BS ISO 6262-1:2013. End mills with indexable insertsEnd mills with flatted cylindrical shank
BS ISO 6262-2:2013. End mills with indexable insertsEnd mills with Morse taper shank
BS ISO 6263:1997. Hydraulic fluid power. Compensated flow-control valves. Mounting surfaces
BS ISO 6263:2013. Hydraulic fluid power. Compensated flow-control valves. Mounting surfaces
BS ISO 6264:1998. Hydraulic fluid power. Pressure-relief valves. Mounting surfaces
BS ISO 6265:2013. Alpine skis. Determination of deformation load and breaking load
BS ISO 6266:2013. Alpine skis. Determination of fatigue indexes. Cyclic loading test
BS ISO 6279:2006. Plain bearings. Aluminium alloys for solid bearings
BS ISO 6281:2007. Plain bearings. Testing under conditions of hydrodynamic and mixed lubrication in test rigs
BS ISO 6292:1996. Powered industrial trucks and tractors. Brake performance and component strength
BS ISO 6292:2008. Powered industrial trucks and tractors. Brake performance and component strength
BS ISO 6296:2000, BS 2000-439:2001. Methods of test for petroleum and its products. Petroleum product. Determination of water. Potentiometric Karl Fischer titration method
BS ISO 6301-1:1997. Pneumatic fluid power. Compressed air lubricators.Main characteristics to be included in supplier's literature and product-marking requirements
BS ISO 6301-1:2009. Pneumatic fluid power. Compressed-air lubricatorsMain characteristics to be included in supplier's literature and product-marking requirements
BS ISO 6301-2:1997. Pneumatic fluid power. Compressed air lubricators.Test methods to determine the main characteristics to be included in supplier's literature
BS ISO 6305-2:2007. Railway components. Technical delivery requirementsNon-alloy carbon steel baseplates
BS ISO 6310:2009. Road vehicles. Brake linings. Compressive strain test methods
BS ISO 6312:2010. Road vehicles. Brake linings. Shear test procedure for disc brake pad and drum brake shoe assemblies
BS ISO 6328:2000. Photography. Photographic materials. Determination of ISO resolving power
BS ISO 633:2007. Cork. Vocabulary
BS ISO 6336-1:1996. Calculation of load capacity of spur and helical gearsBasic principles, introduction and general influence factors
BS ISO 6336-1:2006. Calculation of load capacity of spur and helical gearsBasic principles, introduction and general influence factors
BS ISO 6336-2:1996. Calculation of load capacity of spur and helical gearsCalculation of surface durability (pitting)
BS ISO 6336-2:2006. Calculation of load capacity of spur and helical gearsCalculation of surface durability (pitting)
BS ISO 6336-3:1996. Calculation of load capacity of spur and helical gearsCalculation of tooth bending strength
BS ISO 6336-3:2006. Calculation of load capacity of spur and helical gearsCalculation of tooth bending strength
BS ISO 6336-5:1996. Calculation of load capacity of spur and helical gearsStrength and quality of materials
BS ISO 6336-5:2003. Calculation of load capacity of spur and helical gearsStrength and quality of materials
BS ISO 6336-6:2006. Calculation of load capacity of spur and helical gearsCalculation of service life under variable load
BS ISO 6342:1993. Micrographics. Aperture cards. Method of measuring thickness of buildup area
BS ISO 6344-1:1998. Coated abrasives. Grain size analysisGrain size distribution test
BS ISO 6344-2:1998. Coated abrasives. Grain size analysisDetermination of grain size distribution of macrogrits P12 to P220
BS ISO 6344-3:1998. Coated abrasives. Grain size analysisDetermination of grain size distribution of microgrits P240 to P2500
BS ISO 6344-3:2013. Coated abrasives. Grain size analysisDetermination of grain size distribution of microgrits P240 to P2500
BS ISO 6348:1980. Textiles. Determination of mass. Vocabulary
BS ISO 6356:2000. Textile floor coverings. Assessment of static electrical propensity. Walking test
BS ISO 6356:2012. Textile and laminate floor coverings. Assessment of static electrical propensity. Walking test
BS ISO 6362-6:2012. Wrought aluminium and aluminium alloys. Extruded rods/bars, tubes and profilesRound, square, rectangular and hexagonal tubes. Tolerances on shape and dimensions
BS ISO 6362-7:2012. Wrought aluminium and aluminium alloys. Extruded rods/bars, tubes and profilesChemical composition
BS ISO 6370-1:1991. Vitreous and porcelain enamels. Determination of the resistance to abrasionAbrasion testing apparatus
BS ISO 6370-2:1991. Vitreous and porcelain enamels. Determination of the resistance to abrasionLoss in mass after sub-surface abrasion
BS ISO 6370-2:2011. Vitreous and porcelain enamels. Determination of the resistance to abrasionLoss in mass after sub-surface abrasion
BS ISO 639-1:2002. Codes for the representation of the names of languagesAlpha-2 code
BS ISO 639-2:1998. Codes for the representation of the names of languagesAlpha-3 code
BS ISO 6393:1998. Acoustics. Measurement of exterior noise emitted by earth-moving machinery. Stationary test conditions
BS ISO 639-3:2007. Codes for the representation of names of languagesAlpha-3 code for comprehensive coverage of languages
BS ISO 6393:2008. Earth-moving machinery. Determination of sound power level noise emissions. Stationary test conditions
BS ISO 6394:1998. Acoustics. Measurement at the operator's position of noise emitted by earth-moving machinery. Stationary test conditions
BS ISO 6394:2008. Earth-moving machinery. Determination of emission sound pressure level at operator's position. Stationary test conditions
BS ISO 639-4:2010. Codes for the representation of names of languagesGeneral principles of coding of the representation of names of languages and related entities, and application guidelines
BS ISO 639-5:2008
BS ISO 6395:2008. Earth-moving machinery. Determination of sound power level. Dynamic test conditions
BS ISO 6396:2008. Earth-moving machinery. Determination of emission sound pressure level at operator's position. Dynamic test conditions
BS ISO 639-6:2009. Codes for the representation of names of languagesAlpha-4 code for comprehensive coverage of language variants
BS ISO 6402-1:1990. Plastics. Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materialsDesignation
BS ISO 6405-1:2004+A1:2010. Earth-moving machinery. Symbols for operator controls and other displaysCommon symbols
BS ISO 6415:2005. Internal combustion engines. Spin-on filters for lubricating oil. Dimensions
BS ISO 6421:2012. Hydrometry. Methods for assessment of reservoir sedimentation
BS ISO 6426-2:2002+A1:2012. Horological vocabulary Technical and commercial definitions
BS ISO 6431:1992. Pneumatic fluid power. Single rod cylinders, 1000 kPa (10 bar) series, with detachable mountings, bores from 32 mm to 320 mm. Mounting dimensions
BS ISO 6432:1985. Pneumatic fluid power. Single rod cylinders. 10 bar (1 000 kPa) series. Bores from 8 to 25 mm. Mounting dimensions
BS ISO 6446:1994. Rubber products. Bridge bearings. Specification for rubber materials
BS ISO 6452:2007. Rubber- or plastics-coated fabrics. Determination of fogging characteristics of trim materials in the interior of automobiles
BS ISO 6460-1:2007. Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumptionGeneral test requirements
BS ISO 6460-2:2007. Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumptionTest cycles and specific test conditions
BS ISO 6460-3:2007. Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumptionFuel consumption measurement at a constant speed
BS ISO 6462:2011. Face and shoulder milling cutters with indexable inserts. Dimensions
BS ISO 6469-1:2009. Electrically propelled road vehicles. Safety specificationsOn-board rechargeable energy storage system (RESS)
BS ISO 6469-2:2009. Electrically propelled road vehicles. Safety specificationsVehicle operational safety means and protection against failures
BS ISO 6469-3:2011. Electrically propelled road vehicles. Safety specificationsProtection of persons against electric shock
BS ISO 6472:2004. Rubber compounding ingredients. Abbreviations
BS ISO 6472:2010. Rubber compounding ingredients. Symbols and abbreviated terms
BS ISO 6474-1:2010. Implants for surgery. Ceramic materialsCeramic materials based on high purity alumina
BS ISO 6474-2:2012. Implants for surgery. Ceramic materialsComposite materials based on a high-purity alumina matrix with zirconia reinforcement
BS ISO 6487:2002+A1:2008. Road vehicles. Measurement techniques in impact tests. Instrumentation
BS ISO 6487:2012. Road vehicles. Measurement techniques in impact tests. Instrumentation
BS ISO 6488:2004. Tobacco and tobacco products. Determination of water Content. Karl Fischer method
BS ISO 6489-1:2001. Agricultural vehicles. Mechanical connections between towed and towing vehiclesDimensions of hitch-hooks
BS ISO 6489-2:2002. Agricultural vehicles. Mechanical connections between towed and towing vehiclesSpecifications for clevis coupling 40
BS ISO 6489-3:2004. Agricultural vehicles. Mechanical connections between towed and towing vehiclesTractor drawbar
BS ISO 6489-4:2004. Agricultural vehicles. Mechanical connections between towed and towing vehiclesDimensions of piton-type coupling
BS ISO 6489-5:2011. Agricultural vehicles. Mechanical connections between towed and towing vehiclesSpecifications for non-swivel clevis couplings
BS ISO 6497:2002. Animal feeding stuffs. Sampling
BS ISO 6505:2005. Rubber, vulcanized or thermoplastic. Determination of tendency to adhere to and corrode metals
BS ISO 6517:2013. Air cargo. Certified lower deck containers. Design and testing
BS ISO 6518-1:2002. Road vehicles. Ignition systemsVocabulary
BS ISO 6519:2004. Diesel engines. Fuel injection pumps. Tapers for shaft ends and hubs
BS ISO 6523:1984. Data interchange. Structure for the identification of organizations
BS ISO 6531:1999. Machinery for forestry. Portable hand-held chain-saws. Vocabulary
BS ISO 6531:2008. Machinery for forestry. Portable chain-saws. Vocabulary
BS ISO 6533:2001. Forestry machinery. Portable chain-saw front hand-guard. Dimensions and clearances
BS ISO 6533:2012. Forestry machinery. Portable chain-saw front hand-guard. Dimensions and clearances
BS ISO 6534:2007+A1:2012. Forestry machinery. Portable chain-saw hand-guards. Mechanical strength
BS ISO 6535:2008. Portable chain-saws. Chain brake performance
BS ISO 6547:1981. Hydraulic fluid power. Cylinders. Piston seal housings incorporating bearing rings. Dimensions and tolerances
BS ISO 6549:1999. Road vehicles. Procedure for H- and R-point determination
BS ISO 6550-3:2002. Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housingM10 glow-plugs
BS ISO 6550-3:2009. Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housingM10 glow-plugs
BS ISO 6550-3:2013. Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housingM10 glow-plugs
BS ISO 6550-4:2005. Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housingM8 x 1 glow-plugs
BS ISO 6550-4:2009. Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housingM8 x 1 glow-plugs
BS ISO 6552:1980, ISO 6552-1980. Automatic steam traps. Definition of technical terms
BS ISO 6561-1:2005. Fruits, vegetables and derived products. Determination of cadmium contentMethod using graphite furnace atomic absorption spectrometry
BS ISO 6561-2:2005. Fruits, vegetables and derived products. Determination of cadmium contentMethod using flame atomic absorption spectrometry
BS ISO 6565:2011. Tobacco and tobacco products. Draw resistance of cigarettes and pressure drop of filter rods. Standard conditions and measurement
BS ISO 6576:2004. Laurel (Laurus nobilis L.). Whole and ground leaves.
BS ISO 6580:2005, BS 6339:2005. General-purpose industrial fans. Circular flanges. Dimensions
BS ISO 6588-1:2005. Paper, board and pulps. Determination of pH of aqueous extractsCold extraction
BS ISO 6588-1:2012. Paper, board and pulps. Determination of pH of aqueous extractsCold extraction
BS ISO 6588-2:2005. Paper, board and pulps. Determination of pH of aqueous extractsHot extraction
BS ISO 6588-2:2012. Paper, board and pulps. Determination of pH of aqueous extractsHot extraction
BS ISO 6593:1990. Information processing. Program flow for processing sequential files in terms of record groups
BS ISO 6605:2002. Hydraulic fluid power. Hoses and hose assemblies. Test methods
BS ISO 6611:2004. Milk and milk products. Enumeration of colony-forming units of yeasts and/or moulds. Colony-count technique at 25°C
BS ISO 6621-1:2007. Internal combustion engines. Piston ringsVocabulary
BS ISO 6621-2:2003. Internal combustion engines. Piston ringsInspection measuring principles
BS ISO 6621-4:2003. Internal combustion engines. Piston ringsGeneral specifications
BS ISO 6621-5:2005. Internal combustion engines. Piston ringsQuality requirements
BS ISO 6621-5:2013. Internal combustion engines. Piston ringsQuality requirements
BS ISO 6622-1:2003. Internal combustion engines. Piston ringsRectangular rings made of cast iron
BS ISO 6622-2:2003. Internal combustion engines. Piston ringsRectangular rings made of steel
BS ISO 6623:2004. Internal combustion engines. Piston rings. Scraper rings made of cast iron
BS ISO 6623:2013. Internal combustion engines. Piston rings. Scraper rings made of cast iron
BS ISO 6624-2:2003. Internal combustion engines. Piston ringsHalf keystone rings made of cast iron
BS ISO 6624-4:2003. Internal combustion engines. Piston ringsHalf keystone rings made of steel
BS ISO 6626-2:2013. Internal combustion engines. Piston ringsCoil-spring-loaded oil control rings of narrow width made of cast iron
BS ISO 6626-3:2008. Internal combustion engines. Piston ringsCoil-spring-loaded oil control rings made of steel
BS ISO 6627:2011. Internal combustion engines. Piston rings. Expander/segment oil-control rings
BS ISO 6646:2000. Rice. Determination of the potential milling yield from paddy and husked rice
BS ISO 6646:2011. Rice. Determination of the potential milling yield from paddy and from husked rice
BS ISO 6656:2002. Animal and vegetable fats and oils. Determination of polyethylene-type polymers
BS ISO 6658:2005. Sensory analysis. Methodology. General guidance
BS ISO 666:1996. Machine tools. Mounting of plain grinding wheels by means of hub flanges
BS ISO 666:2012. Machine tools. Mounting of grinding wheels by means of hub flanges
BS ISO 6666:2011. Coffee sampling. Triers for green coffee or raw coffee and parchment coffee
BS ISO 6668:2008. Green coffee. Preparation of samples for use in sensory analysis
BS ISO 6670:2002. Instant coffee. Sampling method for bulk units with liners
BS ISO 6673:2003. Green coffee. Determination of loss in mass at 105°C
BS ISO 668:1995. Series 1 Freight containers. Classification, dimensions and ratings
BS ISO 668:2013. Series 1 freight containers. Classification, dimensions and ratings
BS ISO 6686:1995. Equipment for crop protection. Anti-drip devices. Determination of performance
BS ISO 6690:1996. Milking machine installations. Mechanical tests
BS ISO 6690:2007. Milking machine installations. Mechanical tests
BS ISO 6710:1995. Single-use containers for venous blood specimen collection
BS ISO 6721-10:1999. Plastics. Determination of dynamic mechanical propertiesComplex shear viscosity using a parallel-plate oscillatory rheometer
BS ISO 6721-11:2012. Plastics. Determination of dynamic mechanical propertiesGlass transition temperature
BS ISO 6721-4:2008. Plastics. Determination of dynamic mechanical propertiesTensile vibration. Non-resonance method
BS ISO 6721-9:1997+A1:2007, ISO 6721-9:1997. Plastics. Determination of dynamic mechanical propertiesTensile vibration. Sonic-pulse propagation method
BS ISO 6722:2006. Road vehicles. 60 V and 600 V single-core cables. Dimensions, test methods and requirements
BS ISO 6722-1:2011. Road vehicles. 60 V and 600 V single-core cablesDimensions, test methods and requirements for copper conductor cables
BS ISO 6727:2012. Road vehicles. Motorcycles. Symbols for controls, indicators and tell-tales
BS ISO 6730:2005. Milk. Enumeration of colony-forming units of psychrotrophic microorganisms. Colony-count technique at 6,5°C
BS ISO 6731:2010. Milk, cream and evaporated milk. Determination of total solids content (Reference method)
BS ISO 6732:2010. Milk and milk products. Determination of iron content. Spectrometric method (Reference method)
BS ISO 6734:2010. Sweetened condensed milk. Determination of total solids content (Reference method)
BS ISO 6741-1:1989. Textiles. Fibres and yarns. Determination of commercial mass of consignmentsMass determination and calculations
BS ISO 6741-2:1987. Textiles. Fibres and yarns. Determination of commercial mass of consignmentsMethods for obtaining laboratory samples
BS ISO 6741-3:1987. Textiles. Fibres and yarns. Determination of commercial mass of consignmentsSpecimen cleaning procedures
BS ISO 6743-1:2002. Lubricants, industrial oils and related products (class L). ClassificationFamily A (Total loss systems)
BS ISO 6743-15:2007. Lubricants, industrial oils and related products (class L). ClassificationFamily E (Internal combustion engine oils)
BS ISO 6743-3:2003. Lubricants, industrial oils and related products (class L). ClassificationFamily D (Compressors)
BS ISO 6743-5:2006. Lubricants, industrial oils and related products (class L). ClassificationFamily T (turbines)
BS ISO 6743-9:2003. Lubricants, industrial oils and related products (class L). ClassificationFamily X (Greases)
BS ISO 6743-99:2002. Lubricants, industrial oils and related products (class L). ClassificationGeneral
BS ISO 6746-1:2003, BS 6914-2:2003. Earth-moving machinery. Definitions of dimensions and codesBase machine
BS ISO 6746-2:2003, BS 6914-3:2003. Earth-moving machinery. Definitions of dimensions and codesEquipment and attachments
BS ISO 6747:2013. Earth-moving machinery. Dozers. Terminology and commercial specifications
BS ISO 6750:2005. Earth-moving machinery. Operator's manual. Content and format
BS ISO 6751:1998. Tools for moulding. Ejector pins with cylindrical head
BS ISO 6751:2011. Tools for moulding. Ejector pins with cylindrical head
BS ISO 6752:2008. Tools for pressing. Round punches with 60 degrees conical head and straight shank
BS ISO 6753-1:2005. Tools for pressing and moulding. Machined platesMachined plates for press tools
BS ISO 6753-2:1998. Tools for pressing and moulding. Machined platesMachined plates for moulds
BS ISO 6768:1998. Ambient air. Determination of mass concentration of nitrogen dioxide. Modified Griess-Saltzman method
BS ISO 6771:2007. Aerospace. Fluid systems and components. Pressure and temperature classifications
BS ISO 6772:2012. Aerospace. Fluid systems. Impulse testing of hydraulic hose, tubing and fitting assemblies
BS ISO 6780:1988. General-purpose flat pallets for through transit of goods. Principal dimensions and tolerances
BS ISO 6780:2003. Flat pallets for intercontinental materials handling. Principal dimensions and tolerances
BS ISO 6787:2001. Assembly tools for screws and nuts. Adjustable wrenches
BS ISO 6798:1995. Reciprocating internal combustion engines. Measurement of emitted airborne noise. Engineering method and survey method
BS ISO 6805:1994. Rubber hoses and hose assemblies for underground mining. Wire-reinforced hydraulic types for coal mining. Specification
BS ISO 68-1:1998. ISO general purpose screw threads. Basic profileMetric screw threads
BS ISO 6811:1998. Spherical plain bearings. Vocabulary
BS ISO 6813:1998. Road vehicles. Collision classification. Terminology
BS ISO 6814:2009. Machinery for forestry. Mobile and self-propelled machinery. Terms, definitions and classification
BS ISO 68-2:1998. ISO general purpose screw threads. Basic profileInch screw threads
BS ISO 6826:1997. Reciprocating internal combustion engines. Fire protection
BS ISO 6846:1992. Photography. Black and white continuous tone papers. Determination of ISO speed and ISO range for printing
BS ISO 6849:1996. Photography. Processing wastes. Determination of boron
BS ISO 6850:1994. Photography. Processing wastes. Determination of nitrate by a spectrometric method using brucine
BS ISO 6851:2001. Photography. Processing waste. Determination of total amino nitrogen (microdiffusion Kjeldahl method)
BS ISO 6853:2001. Photography. Processing waste. Determination of ammoniacal nitrogen (microdiffusion method)
BS ISO 6855-1:2012. Mopeds. Measurement method for gaseous exhaust emissions and fuel consumptionGeneral test requirements
BS ISO 6855-2:2012. Mopeds. Measurement method for gaseous exhaust emissions and fuel consumptionTest cycles and specific test conditions
BS ISO 6855-3:2012. Mopeds. Measurement method for gaseous exhaust emissions and fuel consumptionFuel consumption measurement at a constant speed
BS ISO 6856:2005. Road vehicles. Unscreened high-voltage ignition cable assemblies. Test methods and general requirements
BS ISO 6861:1996. Information and documentation. Glagolitic alphabet coded character set for bibliographic information interchange
BS ISO 687:2004. Solid mineral fuels. Coke. Determination of moisture in the general analysis test sample
BS ISO 687:2010. Solid mineral fuels. Coke. Determination of moisture in the general analysis test sample
BS ISO 6870:2002. Animal feeding stuffs. Qualitative determination of zearalenone
BS ISO 6879:1995. Air quality. Performance characteristics and related concepts for air quality measuring methods
BS ISO 6883:2007. Animal and vegetable fats and oils. Determination of conventional mass per volume (litre weight in air)
BS ISO 6884:2008. Animal and vegetable fats and oils. Determination of ash
BS ISO 69:1998. Cinematography. 16 mm motion-picture magnetic film. Cutting and perforating dimensions
BS ISO 690:2010. Information and documentation. Guidelines for bibliographic references and citations to information resources
BS ISO 690-2:1997. Information and documentation. Bibliographic referencesElectronic documents or parts thereof
BS ISO 6914:2008. Rubber, vulcanized or thermoplastic. Determination of ageing characteristics by measurement of stress relaxation in tension
BS ISO 6916-1:1995. Flexible cellular polymeric materials. Sponge and expanded cellular rubber products. SpecificationSheeting
BS ISO 6939:1988. Textiles. Yarns from packages. Method of test for breaking strength of yarn by the skein method
BS ISO 6943:2007. Rubber, vulcanized. Determination of tension fatigue
BS ISO 6943:2011. Rubber, vulcanized. Determination of tension fatigue
BS ISO 6953-1:2000. Pneumatic fluid power. Compressed air pressure regulators and filter-regulatorsMain characteristics to be included in literature from suppliers and product-marking requirements
BS ISO 6953-2:2000. Pneumatic fluid power. Compressed air pressure regulators and filter-regulatorsTest methods to determine the main characteristics to be included in literature from suppliers
BS ISO 6953-3:2013. Pneumatic fluid power. Compressed air pressure regulators and filter-regulatorsAlternative test methods for measuring the flow-rate characteristics of pressure regulators
BS ISO 6954:2000. Mechanical vibration. Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships
BS ISO 6966-1:2005. Aircraft ground equipment. Basic requirementsGeneral design requirements
BS ISO 6966-2:2005. Aircraft ground equipment. Basic requirementsSafety requirements
BS ISO 6967:2006. Aircraft ground equipment. Main deck container/pallet loader. Functional requirements
BS ISO 6968:2005. Aircraft ground equipment. Lower deck loader. Functional requirements
BS ISO 6969:2004. Road vehicles. Sound signalling devices. Tests after mounting on vehicle
BS ISO 6971:2002. Cranked-link drag chains of welded construction, attachments and sprockets
BS ISO 6972:2002. Cranked-link mill chains of welded construction, attachments and sprockets
BS ISO 6980:1996. Specification for reference beta radiations for calibrating dosimeters and dose-rate meters and for determining their response as a function of beta-radiation energy
BS ISO 6980-1:2006. Nuclear energy. Reference beta-particle radiationMethods of production
BS ISO 6980-2:2004. Nuclear energy. Reference beta-particle radiationCalibration fundamentals related to basic quantities characterizing the radiation field
BS ISO 6980-3:2006. Nuclear energy. Reference beta-particle radiationCalibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence
BS ISO 6981:1992. Hydraulic fluid power. Cylinders. Rod end plain eyes. Mounting dimensions
BS ISO 6982:1992. Hydraulic fluid power. Cylinders. Rod end spherical eyes. Mounting dimensions
BS ISO 6986:2013. Side and face milling (slotting) cutters with indexable inserts. Dimensions
BS ISO 6987:2012. Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole. Dimensions
BS ISO 6989:1981. Textiles fibres. Determination of length and length distribution of staple fibres (by measurement of single fibres)
BS ISO 70:1981. Cinematography. Monophonic 35 mm negative photographic sound record on 35 mm motion-picture film. Position and maximum width dimensions
BS ISO 7000:2004. Graphical symbols for use on equipment. Index and synopsis
BS ISO 7004:1987. Photography. Industrial radiographic film. Determination of ISO speed and average gradient when exposed to X- and γ-radiation
BS ISO 7004:2002. Photography. Industrial radiographic films. Determination of ISO speed, ISO average gradient and ISO gradients G2 and G4 when exposed to X- and gamma-radiation
BS ISO 7005-1:2011. Pipe flangesSteel flanges for industrial and general service piping systems
BS ISO 701:1998. International gear notation. Symbols for geometrical data
BS ISO 702-1:2009. Machine tools. Connecting dimensions of spindle noses and work holding chucksConical connection
BS ISO 702-2:2007. Machine tools. Connecting dimensions of spindle noses and work holding chucksCamlock type
BS ISO 702-3:2007. Machine tools. Connecting dimensions of spindle noses and work holding chucksBayonet type
BS ISO 7026:1997. Diesel engines. Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size 'S1' type 'B'
BS ISO 704:2000. Terminology work. Principles and methods
BS ISO 704:2009. Terminology work. Principles and methods
BS ISO 7041:1997. Prevailing torque type hexagon nuts (with non-metallic insert), style 2. Property classes 9 and 12
BS ISO 7041:2002. Prevailing torque type hexagon nuts (with non-metallic insert), style 2. Property classes 9 and 12
BS ISO 7041:2012. Prevailing torque type hexagon nuts (with non-metallic insert), style 2. Property classes 9 and 12
BS ISO 706:2004. Rubber latex. Determination of coagulum content (sieve residue)
BS ISO 7063:2003. Rolling bearings. Needle roller bearing track rollers. Boundary dimensions and tolerances
BS ISO 709:2001. Essential oils. Determination of ester value
BS ISO 7112:1999. Machinery for forestry. Portable hand-held brush-cutters and grass-trimmers. Vocabulary
BS ISO 7112:2008. Machinery for forestry. Portable brush-cutters and grass-trimmers. Vocabulary
BS ISO 7113:1999. Portable hand-held forestry machines. Cutting attachments for brush cutters. Single piece metal blades
BS ISO 7116:2011. Mopeds. Measurement method for determining maximum speed
BS ISO 7117:2010. Motorcycles. Measurement method for determining maximum speed
BS ISO 7121:2006. Steel ball valves for general-purpose industrial applications
BS ISO 7130:2013. Earth-moving machinery. Operator training. Content and methods
BS ISO 7131:2009. Earth-moving machinery. Loaders. Terminology and commercial specifications
BS ISO 7132:2003, BS 6914-4:2003. Earth-moving machinery. Dumpers. Terminology and commercial specifications
BS ISO 7133:2013. Earth-moving machinery. Scrapers. Terminology and commercial specifications
BS ISO 7135:2009. Earth-moving machinery. Hydraulic excavators. Terminology and commercial specifications
BS ISO 7141:2005. Road vehicles. Light alloy wheels. Impact test
BS ISO 7146-1:2008. Plain bearings. Appearance and characterization of damage to metallic hydrodynamic bearingsGeneral
BS ISO 7146-2:2008. Plain bearings. Appearance and characterization of damage to metallic hydrodynamic bearingsCavitation erosion and its countermeasures
BS ISO 7148-1:1999. Plain bearings. Testing of tribological behaviour of bearing materialsTesting of bearing metals
BS ISO 7148-1:2012. Plain bearings. Testing of the tribological behaviour of bearing materialsTesting of bearing metals
BS ISO 7148-2:1999. Plain bearings. Testing of tribological behaviour of bearing materialsTesting of polymer-based bearing materials
BS ISO 7148-2:2012. Plain bearings. Testing of the tribological behaviour of bearing materialsTesting of polymer-based bearing materials
BS ISO 7169:2007. Aerospace. Separable tube fittings for fluid systems, for 24° cones, for pressures up to 3000 psi or 21000 kPa. Procurement specification, inch/metric
BS ISO 7176-1:1999. WheelchairsDetermination of static stability
BS ISO 7176-11:2012. WheelchairsTest dummies
BS ISO 7176-14:1997. WheelchairsPower and control systems for electric wheelchairs. Requirements and test methods
BS ISO 7176-14:2008. WheelchairsPower and control systems for electrically powered wheelchairs and scooters. Requirements and test methods
BS ISO 7176-15:1996. WheelchairsRequirements for information disclosure, documentation and labelling
BS ISO 7176-16:1997. WheelchairsResistance to ignition of upholstered parts. Requirements and test methods
BS ISO 7176-16:2012. WheelchairsResistance to ignition of postural support devices
BS ISO 7176-2:2001. WheelchairsDetermination of dynamic stability of electric wheelchairs
BS ISO 7176-21:2003. WheelchairsRequirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters
BS ISO 7176-21:2009. WheelchairsRequirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers
BS ISO 7176-22:2000. WheelchairsSet-up procedures
BS ISO 7176-24:2004. WheelchairsRequirements and test methods for user-operated stair-climbing devices
BS ISO 7176-26:2007. WheelchairsVocabulary
BS ISO 7176-28:2012. WheelchairsRequirements and test methods for stair-climbing devices
BS ISO 7176-3:2003. WheelchairsDetermination of effectiveness of brakes
BS ISO 7176-3:2012. WheelchairsDetermination of effectiveness of brakes
BS ISO 7176-4:1997. WheelchairsEnergy consumption of electric wheelchairs and scooters for determination of theoretical distance range
BS ISO 7176-4:2008. WheelchairsEnergy consumption of electric wheelchairs and scooters for determination of theoretical distance range
BS ISO 7176-5:2008. WheelchairsDetermination of dimensions, mass and manoeuvring space
BS ISO 7176-6:2001. WheelchairsDetermination of maximum speed, acceleration and deceleration of electric wheelchairs
BS ISO 7176-8:1998. WheelchairsRequirements and test methods for static, impact and fatigue strengths
BS ISO 7176-9:2001. WheelchairsClimatic tests for electric wheelchairs
BS ISO 7176-9:2009. WheelchairsClimatic tests for electric wheelchairs
BS ISO 7180:1986. Pneumatic fluid power. Cylinders. Bore and port thread sizes
BS ISO 7181:1991. Hydraulic fluid power. Cylinders. Bore and rod area ratios
BS ISO 7183:2007. Compressed-air dryers. Specifications and testing
BS ISO 7187:1995. Photography. Materials for direct-positive colour-print cameras. Determination of ISO speed
BS ISO 7194:2008. Measurement of fluid flow in closed conduits. Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot statics tubes
BS ISO 7197:1997. Neurosurgical implants. Sterile, single-use hydrocephalus shunts and components
BS ISO 7198:1998. Cardiovascular implants. Tubular vascular prostheses
BS ISO 7199:2009+A1:2012. Cardiovascular implants and artificial organs. Blood-gas exchangers (oxygenators)
BS ISO 7200:1984. Technical drawing. Title blocks
BS ISO 7203-1:1995. Fire extinguishing media. Foam concentratesSpecification for low expansion foam concentrates for top application to water-immiscible liquids
BS ISO 7203-2:1995. Fire extinguishing media. Foam concentratesSpecification for medium and high expansion foam concentrates for top application to water-immiscible liquids
BS ISO 7206-1:2008. Implants for surgery. Partial and total hip joint prosthesesClassification and designation of dimensions
BS ISO 7206-10:2003. Implants for surgery. Partial and total hip-joint prosthesesDetermination of resistance to static load of modular femoral heads
BS ISO 7206-2:2011. Implants for surgery. Partial and total hip joint prosthesesArticulating surfaces made of metallic, ceramic and plastics materials
BS ISO 7206-4:2002. Implants for surgery. Partial and total hip joint prosthesesDetermination of endurance properties of stemmed femoral components
BS ISO 7206-4:2010. Implants for surgery. Partial and total hip joint prosthesesDetermination of endurance properties and performance of stemmed femoral components
BS ISO 7207-1:2007. Implants for surgery. Components for partial and total knee joint prosthesesClassification, definitions and designation of dimensions
BS ISO 7207-2:2011. Implants for surgery. Components for partial and total knee joint prosthesesArticulating surfaces made of metal, ceramic and plastics materials
BS ISO 7210:2013. Routine analytical cigarette-smoking machine. Additional test methods for machine verification
BS ISO 7211-3:1984. Textiles. Woven fabrics. Construction. Methods of analysisDetermination of crimp of yarn in fabric
BS ISO 7211-4:1984. Textiles. Woven fabrics. Construction. Methods of analysisDetermination of twist in yarn removed from fabric
BS ISO 7211-5:1984. Textiles. Woven fabrics. Construction. Methods of analysisDetermination of linear density of yarn removed from fabric
BS ISO 7215:1995. Iron ores. Determination of relative reducibility
BS ISO 7215:2007. Iron ores for blast furnace feedstocks. Determination of the reducibility by the final degree of reduction index
BS ISO 7229:1997. Rubber- or plastics-coated fabrics. Measurements of gas permeability
BS ISO 7238:2004. Butter. Determination of pH of the serum. Potentiometric method
BS ISO 7240-15:2004. Fire detection and alarm systemsPoint type fire detectors using scattered light, transmitted light or ionization sensors in combination with a heat sensor
BS ISO 7240-8:2007. Fire detection and alarm systemsCarbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor
BS ISO 7241-2:2000. Hydraulic fluid power. Quick-action couplingsTest methods
BS ISO 725:2009. ISO inch screw threads. Basic dimensions
BS ISO 7251:2005. Microbiology of food and animal feeding stuffs. Horizontal method for the detection and enumeration of presumptive Escherichia coli. Most probable number technique
BS ISO 7267-1:2008. Rubber-covered rollers. Determination of apparent hardnessIRHD method
BS ISO 7267-2:2008. Rubber-covered rollers. Determination of apparent hardnessShore-type durometer method
BS ISO 7267-3:2007. Rubber-covered rollers. Determination of apparent hardnessPusey and Jones method
BS ISO 7267-3:2011. Rubber-covered rollers. Determination of apparent hardnessPusey and Jones method
BS ISO 7270-1:2003+A1:2010. Rubber. Analysis by pyrolytic gas-chromatographic methodsIdentification of polymers (single polymers and polymer blends)
BS ISO 7270-2:2005. Rubber. Analysis by pyrolytic gas-chromatographic methodsDetermination of styrene/butadiene/isoprene ratio
BS ISO 7270-2:2012. Rubber. Analysis by pyrolytic gas-chromatographic methodsDetermination of styrene/butadiene/isoprene ratio
BS ISO 727-1:2002. Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressureMetric series
BS ISO 727-2:2002. Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressureInch-based series
BS ISO 727-2:2005. Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressureInch-based series
BS ISO 7278-1:1996. Liquid hydrocarbons. Dynamic measurement. Proving systems for volumetric metersGeneral principles
BS ISO 7278-3:1998, ISO 7278-3:1998. Liquid hydrocarbons. Dynamic measurement. Proving systems for volumetric metersPulse interpolation techniques
BS ISO 7278-4:1999. Liquid hydrocarbons. Dynamic measurement. Proving systems for volumetric metersGuide for operators of pipe provers
BS ISO 7299:1996. Diesel engines. End-mounting flanges for fuel injection pumps
BS ISO 7299-1:2007. Diesel engines. End-mounting flanges for pumpsFuel injection pumps
BS ISO 7299-2:2009. Diesel engines. End-mounting flanges for pumpsHigh-pressure supply pumps for common rail fuel injection systems
BS ISO 730:2009. Agricultural wheeled tractors. Rear-mounted three-point linkage. Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4
BS ISO 7301:2011. Rice. Specification
BS ISO 7304-2:2008. Alimentary pasta produced from durum wheat semolina. Estimation of cooking quality by sensory analysisRoutine method
BS ISO 7305:1998. Milled cereal products. Determination of fat acidity
BS ISO 7314:2002. Aerospace. Fluid systems. Metal hose assemblies
BS ISO 732:1991. Photography. Film dimensions. 120 and 220 sizes
BS ISO 732:2000. Photography. 120-size and 220-size films. Dimensions
BS ISO 7322:2000. Composition cork. Test methods
BS ISO 7341:2000. Banking. Nostro accounts reconciliation
BS ISO 7341:2005. Banking. Nostro accounts reconciliation
BS ISO 7343:1993. Cinematography. Two-track photographic sound records on 35 mm motion-picture prints. Positions and width dimensions
BS ISO 7348:1992. Glass containers. Manufacture. Vocabulary
BS ISO 7365:2012. Shipbuilding and marine structures. Deck machinery. Towing winches for deep sea use
BS ISO 7372:2005. Trade data interchange. Trade data elements directory
BS ISO 7388-1:2007. Tool shanks with 7/24 taper for automatic tool changersDimensions and designation of shanks of forms A, AD, AF, U, UD and UF
BS ISO 7388-2:2007. Tool shanks with 7/24 taper for automatic tool changersDimensions and designation of shanks of forms J, JD and JF
BS ISO 7388-3:2007. Tool shanks with 7/24 taper for automatic tool changersRetention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
BS ISO 7388-3:2013. Tool shanks with 7/24 taper for automatic tool changersRetention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
BS ISO 7401:2003. Road vehicles. Lateral transient response test methods. Open-loop test methods
BS ISO 7401:2011. Road vehicles. Lateral transient response test methods. Open-loop test methods
BS ISO 7404-2:2009. Methods for the petrographic analysis of coalsMethods of preparing coal samples
BS ISO 7404-3:2009. Methods for the petrographic analysis of coalsMethod of determining maceral group composition
BS ISO 7404-5:2009. Methods for the petrographic analysis of coalsMethod of determining microscopically the reflectance of vitrinite
BS ISO 7425-1:1988. Hydraulic fluid power. Housing for elastomer-energized, plastic-faced seals. Dimensions and tolerancesPiston seal housings
BS ISO 7425-2:1989. Hydraulic fluid power. Housing for elastomer-energized, plastic-faced seals. Dimensions and tolerancesRod seal housings
BS ISO 7451:2007. Earth-moving machinery. Volumetric ratings for hoe-type and grab-type buckets of hydraulic excavators and backhoe loaders
BS ISO 7475:2002. Mechanical vibration. Balancing machines. Enclosures and other protective measures for the measuring station
BS ISO 748:1997. Measurement of liquid flow in open channels. Velocity-area methods
BS ISO 7498-2:1989. Information technology. Open systems interconnection. Basic reference modelSecurity architecture
BS ISO 7498-3:1989. Information technology. Open systems interconnection. Basic reference modelNaming and addressing
BS ISO 7504:2001. Gas analysis. Vocabulary
BS ISO 7507-1:2003. Petroleum and liquid petroleum products. Calibration of vertical cylindrical tanksStrapping method
BS ISO 7507-3:2006. Petroleum and liquid petroleum products. Calibration of vertical cylindrical tanksOptical-triangulation method
BS ISO 7507-4:2010. Petroleum and liquid petroleum products. Calibration of vertical cylindrical tanksInternal electro-optical distance-ranging method
BS ISO 7507-5:2000, ISO 7507-5:2000. Petroleum and liquid petroleum products. Calibration of vertical cylindrical tanksExternal electro-optical distance-ranging method
BS ISO 7539-10:2013. Corrosion of metals and alloys. Stress corrosion testingReverse U-bend method
BS ISO 7539-11:2013. Corrosion of metals and alloys. Stress corrosion crackingGuidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
BS ISO 7565:1993. Micrographics. Readers for transparent microforms. Measurement of characteristics
BS ISO 7573:1983. Technical drawings. Item list
BS ISO 7573:2008. Technical product documentation. Parts lists
BS ISO 7578:2008. Road vehicles. Sheath-type glow-plugs. General requirements and test methods
BS ISO 7583:2013. Anodizing of aluminium and its alloys. Terms and definitions
BS ISO 7588-1:1998. Road vehicles. Electrical/electronic switching devicesRelays and flashers
BS ISO 7588-2:1998. Road vehicles. Electrical/electronic switching devicesElectronic devices
BS ISO 7588-3:1998. Road vehicles. Electrical/electronic switching devicesMicrorelays
BS ISO 7589:2002. Photography. Illuminants for sensitometry. Specifications for daylight, incandescent tungsten and printer
BS ISO 76:2006. Rolling bearings. Static load ratings
BS ISO 7612:1994. Diesel engines. Base-mounted in-line fuel injection pumps. Mounting dimensions
BS ISO 7612:2006. Diesel engines. Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems. Mounting dimensions
BS ISO 7612:2009. Diesel engines. Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems. Mounting dimensions
BS ISO 7617-1:2001. Plastics-coated fabrics for upholsterySpecification for PVC-coated knitted fabrics
BS ISO 7619-1:2004+A1:2008. Rubber, vulcanized or thermoplastic. Determination of indentation hardnessDurometer method (Shore hardness)
BS ISO 7619-1:2010. Rubber, vulcanized or thermoplastic. Determination of indentation hardnessDurometer method (Shore hardness)
BS ISO 7619-2:2004. Rubber, vulcanized or thermoplastic. Determination of indentation hardnessIRHD pocket meter method
BS ISO 7619-2:2010. Rubber, vulcanized or thermoplastic. Determination of indentation hardnessIRHD pocket meter method
BS ISO 762:2003. Fruit and vegetable products. Determination of mineral impurities content
BS ISO 7626-1:2011. Mechanical vibration and shock. Experimental determination of mechanical mobilityBasic terms and definitions, and transducer specifications
BS ISO 7628:2010. Road vehicles. Thermoplastics tubing for air braking systems
BS ISO 763:2003. Fruit and vegetable products. Determination of ash insoluble in hydrochloric acid
BS ISO 7634:2003. Road vehicles. Compressed-air braking systems. Test procedures
BS ISO 7634:2007. Road vehicles. Compressed air braking systems for towed vehicles including those with electronic braking control functions .Test procedures
BS ISO 7635:2006. Road vehicles. Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions. Test procedures
BS ISO 7637-2:2011. Road vehicles. Electrical disturbances from conduction and couplingElectrical transient conduction along supply lines only
BS ISO 7637-3:2007. Road vehicles. Electrical disturbances from conduction and couplingElectrical transient transmission by capacitive and inductive coupling via lines other than supply lines
BS ISO 764:2002. Horology. Magnetic resistant watches
BS ISO 7641:2012. Road vehicles. Trailers up to 3,5 t. Calculation of the mechanical strength of steel drawbars
BS ISO 7654:1998. Road vehicles. Spin-on fuel filters for diesel engines. Mounting and connecting dimensions
BS ISO 7660:1983. Essential oils. Determination of ester value of oils containing difficult-to-saponify esters
BS ISO 7663:2005. Halogenated isobutene-isoprene rubber (BIIR and CIIR). Evaluation procedures
BS ISO 7689:2008. Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1100 MPa. Procurement specification
BS ISO 7700-1:2008. Food products. Checking the performance of moisture meters in useMoisture meters for cereals
BS ISO 7700-2:2011. Food products. Checking the performance of moisture meters in useMoisture meters for oilseeds
BS ISO 7714:2008. Agricultural irrigation equipment. Volumetric valves. General requirements and test methods
BS ISO 7718-1:2009. Aircraft. Passenger doors interface requirements for connection of passenger boarding bridgeMain deck doors
BS ISO 7718-2:2009. Aircraft. Passenger doors interface requirements for connection of passenger boarding bridgeUpper deck doors
BS ISO 7720:1997. Prevailing torque type all-metal hexagon nuts, style 2. Property class 9
BS ISO 7720:2012. Prevailing torque type all-metal hexagon nuts, style 2. Property class 9
BS ISO 7738:2001. Assembly tools for screws and nuts. Combination wrenches. Lengths of wrenches and maximum thickness of heads
BS ISO 7743:2004. Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
BS ISO 7743:2008. Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
BS ISO 7743:2011. Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
BS ISO 7745:2010. Hydraulic fluid power. Fire-resistant FR) fluids. Requirements and guidelines for use
BS ISO 7746:1998. Banking. Telex formats for inter-bank messages
BS ISO 7755-1:2013. Hardmetal burrsGeneral specifications
BS ISO 7755-10:2013. Hardmetal burrsConical round- (ball-) nose burrs (style L)
BS ISO 7755-11:2013. Hardmetal burrsConical pointed-nose burrs (style M)
BS ISO 7755-12:2013. Hardmetal burrsInverted cone burrs (style N)
BS ISO 7755-2:2013. Hardmetal burrsCylindrical burrs (style A)
BS ISO 7755-3:2013. Hardmetal burrsCylindrical round- (ball-) nose burrs (style C)
BS ISO 7755-4:2013. Hardmetal burrsSpherical burrs (style D)
BS ISO 7755-5:2013. Hardmetal burrsOval burrs (style E)
BS ISO 7755-6:2013. Hardmetal burrsArch round- (ball-) nose burrs (style F)
BS ISO 7755-7:2013. Hardmetal burrsArch pointed-nose burrs (style G)
BS ISO 7755-8:2013. Hardmetal burrsFlame burrs (style H)
BS ISO 7755-9:2013. Hardmetal burrs60 degrees and 90 degrees cone burrs (styles J and K)
BS ISO 776:2011. Pulps. Determination of acid-insoluble ash
BS ISO 7760:2001. Photography. Processing waste. Determination of hydroquinone
BS ISO 7764:2006. Iron ores. Preparation of predried test samples for chemical analysis
BS ISO 7766:2003. Processing photographic wastes. Analysis of cyanides. Determination of hexacyanoferrate(II) and hexacyanoferrate(III) by spectrometry
BS ISO 7766-1:1993. Photography. Processing wastes. Analysis of cyanides. Determination of hexacyanoferrate(II) and hexacyanoferrate(III) by spectrometry
BS ISO 7768:2006. Textiles. Test method for assessing the smoothness appearance of fabrics after cleansing
BS ISO 7768:2009. Textiles. Test method for assessing the smoothness appearance of fabrics after cleansing
BS ISO 7769:2006. Textiles. Test method for assessing the appearance of creases in fabrics after cleansing
BS ISO 7769:2009. Textiles. Test method for assessing the appearance of creases in fabrics after cleansing
BS ISO 777:2001. Paper, board and pulp. Determination of calcium
BS ISO 777:2005. Paper, board and pulp. Determination of acid-soluble calcium
BS ISO 7770:2006. Textiles. Test method for assessing the smoothness appearance of seams in fabrics after cleansing
BS ISO 7770:2009. Textiles. Test method for assessing the smoothness appearance of seams in fabrics after cleansing
BS ISO 7772-1:1998. Assessment of industrial laundry machinery by its effect on textilesWashing machines
BS ISO 7772-2:1996. Assessment of industrial laundry machinery by its effect on textilesExtracting machines
BS ISO 7772-3:1996. Assessment of industrial laundry machinery by its effect on textilesFlatwork-ironing machines
BS ISO 7772-4:1996. Assessment of industrial laundry machinery by its effect on textilesBatch-drying tumblers
BS ISO 7775:1991. Securities. Scheme for message types
BS ISO 778:2001. Paper, board and pulp. Determination of copper
BS ISO 778:2005. Paper, board and pulp. Determination of acid-soluble copper
BS ISO 7780:1998, BS 7164-26.2:1998. Rubber and rubber latices. Determination of manganese content. Sodium periodate photometric methods
BS ISO 7781:2001. Styrene-butadiene rubber, raw. Determination of soap and organic acid content
BS ISO 7781:2008. Styrene-butadiene rubber, raw. Determination of soap and organic-acid content
BS ISO 7789:1998. Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities
BS ISO 7789:2007. Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities
BS ISO 779:2001. Paper, board and pulp. Determination of iron
BS ISO 779:2005. Paper, board and pulp. Determination of acid-soluble iron
BS ISO 7790:1997. Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05. Clamping dimensions
BS ISO 7790:2013. Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10. Clamping dimensions
BS ISO 7800:2003. Metallic materials. Wire. Simple torsion test
BS ISO 7800:2012. Metallic materials. Wire. Simple torsion test
BS ISO 78-2:1999. Chemistry. Layout for standardsMethods of chemical analysis
BS ISO 7839:2005. Textile machinery and accessories. Knitting machines. Vocabulary andclas sification
BS ISO 7858-1:1998. Measurement of water flow in closed conduits. Combination meters for cold potable waterSpecifications
BS ISO 7858-2:2000. Measurement of water flow in closed conduits. Combination meters for cold potable waterInstallation requirements
BS ISO 7859:2000. Mopeds. Fuel consumption measurements
BS ISO 7867-1:2005. Tyres and rims (metric series) for agricultural tractors and machinesTyre designation, dimensions and marking, and tyre/rim coordination
BS ISO 7867-2:2005+A1:2010. Tyres and rims (metric series) for agricultural tractors and machinesService description and load ratings
BS ISO 7870-1:2007. Control chartsGeneral guidelines
BS ISO 7870-2:2013. Control chartsShewhart control charts
BS ISO 7870-3:2012. Control chartsAcceptance control charts
BS ISO 7870-4:2011. Control chartsCumulative sum charts
BS ISO 787-17:2002. General methods of test for pigments and extendersComparison of lightening power of white pigments
BS ISO 7876-4:2004. Fuel injection equipment. VocabularyHigh-pressure pipes and end-connections
BS ISO 7876-5:2004. Fuel injection equipment. VocabularyCommon rail fuel injection systems
BS ISO 7879:1997. Diesel engines. Cradle mounted in-line fuel injection pumps. Mounting dimensions
BS ISO 7889:2003. Yogurt. Enumeration of characteristic microorganisms. Colony-count technique at 37 °C
BS ISO 7900:2006. Steel wire and wire products for fences. Zinc- and zinc-alloy-coated steel barbed wire
BS ISO 7914:1994. Forestry machinery. Portable chainsaws. Minimum handle clearance and sizes
BS ISO 7914:2002+A1:2012. Forestry machinery. Portable chain-saws. Minimum handle clearance and sizes
BS ISO 7918:1995. Forestry machinery. Portable brush cutters and grass trimmers. Cutting attachment guard dimensions
BS ISO 7919-1:1996. Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteriaGeneral guidelines
BS ISO 7919-2:1996. Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteriaLarge land-based steam turbine generator sets
BS ISO 7919-2:2001. Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteriaLand-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
BS ISO 7919-2:2009. Mechanical vibration. Evaluation of machine vibration by measurements on rotating shaftsLand-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
BS ISO 7919-3:1996. Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteriaCoupled industrial machines
BS ISO 7919-3:2009. Mechanical vibration. Evaluation of machine vibration by measurements on rotating shaftsCoupled industrial machines
BS ISO 7919-4:1996. Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteriaGas turbine sets
BS ISO 7919-4:2009. Mechanical vibration. Evaluation of machine vibration by measurements on rotating shaftsGas turbine sets with fluid-film bearings
BS ISO 7919-5:1997. Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteriaMachine sets in hydraulic power generating and pumping plants
BS ISO 7919-5:2005. Mechanical vibration. Evaluation of machine vibration by measurements on rotating shaftsMachine sets in hydraulic power generating and pumping plants
BS ISO 7967-1:2005. Reciprocating internal combustion engines. Vocabulary of components and systemsStructure and external covers
BS ISO 7967-2:2010. Reciprocating internal combustion engines. Vocabulary of components and systemsMain running gear
BS ISO 7967-3:2010. Reciprocating internal combustion engines. Vocabulary of components and systemsValves, camshaft drives and actuating mechanisms
BS ISO 7967-4:2005. Reciprocating internal combustion engines. Vocabulary of components and systemsPressure charging and air/exhaust gas ducting systems
BS ISO 7967-5:2003. Reciprocating internal combustion engines. Vocabulary of components and systemsCooling systems
BS ISO 7967-5:2010. Reciprocating internal combustion engines. Vocabulary of components and systemsCooling systems
BS ISO 7967-6:2005. Reciprocating internal combustion engines. Vocabulary of components and systemsLubricating systems
BS ISO 7967-7:2005. Reciprocating internal combustion engines. Vocabulary of components and systemsGoverning systems
BS ISO 7967-8:2005. Reciprocating internal combustion engines. Vocabulary of components and systemsStarting systems
BS ISO 7967-9:2010. Reciprocating internal combustion engines. Vocabulary of components and systemsControl and monitoring systems
BS ISO 7970:2000, BS 7274:2000. Wheat (Triticum aestivum L.). Specification
BS ISO 7970:2011. Wheat (Triticum aestivum L.). Specification
BS ISO 7971-1:2003. Cereals. Determination of bulk density, called "mass per hectolitre"Reference method
BS ISO 7975:2006. Passenger cars. Braking in a turn. Open-loop test method
BS ISO 7981-1:2005. Water quality. Determination of polycyclic aromatic hydrocarbons (PAH)Determination of six PAH by high performance thin layer chromatography with fluorescence detection after liquid-liquid extraction
BS ISO 7981-2:2005. Water quality. Determination of polycyclic aromatic hydrocarbons (PAH)Determination of six PAH by high-performance liquid chromatography with fluorescence detection after liquid-liquid extraction
BS ISO 7989-1:2006. Steel wire and wire products. Non-ferrous metallic coatings on steel wireGeneral principles
BS ISO 7989-2:2007. Steel wire and wire products. Non-ferrous metallic coatings on steel wireZinc or zinc-alloy coating
BS ISO 799:2004. Ships and marine technology. Pilot ladders
BS ISO 7992:1992. Iron ores. Determination of reduction properties under load
BS ISO 7992:2007. Iron ores for blast furnace feedstocks. Determination of reduction under load
BS ISO 80000-7:2008. Quantities and unitsLight
BS ISO 8005:2005. Carbonaceous materials used in the production of aluminium. Green and calcined coke. Determination of ash content
BS ISO 8007-3:2004. Carbonaceous materials used in the production of aluminium. Sampling plans and sampling from individual unitsSidewall blocks
BS ISO 8008:2005. Aluminium oxide primarily used for the production of aluminium. Determination of specific surface area by nitrogen adsorption
BS ISO 8009-1:1997. Reusable rubber contraceptive diaphragmsClassification, sampling and requirements
BS ISO 8009-10:1985. Reusable rubber contraceptive diaphragmsRecommendations for storage
BS ISO 8009-2:1985. Reusable rubber contraceptive diaphragmsDetermination of size
BS ISO 8009-3:1985. Reusable rubber contraceptive diaphragmsDetermination of dome thickness
BS ISO 8009-4:1996. Reusable rubber contraceptive diaphragmsFreedom from visible defects
BS ISO 8009-5:1996. Reusable rubber contraceptive diaphragmsDetermination of tensile properties
BS ISO 8009-6:1985. Reusable rubber contraceptive diaphragmsDetermination of deterioration after accelerated ageing
BS ISO 8009-7:1985. Reusable rubber contraceptive diaphragmsDetermination of compression resistance of coil spring and flat spring diaphragms
BS ISO 8009-8:1985. Reusable rubber contraceptive diaphragmsDetermination of twisting during compression of coil spring and flat spring diaphragms
BS ISO 8009-9:1985. Reusable rubber contraceptive diaphragmsPackaging and labelling
BS ISO 8013:2006. Rubber, vulcanized. Determination of creep in compression or shear
BS ISO 8013:2012. Rubber, vulcanized. Determination of creep in compression or shear
BS ISO 8015:1985. Technical drawings. Fundamental tolerancing principle
BS ISO 8018:2007. Tools for moulding. Guide bushes, headed, and locating guide bushes, headed
BS ISO 8020:2002. Tools for pressing. Punches with cylindrical head and straight or reduced shank
BS ISO 8026:2009. Agricultural irrigation equipment. Sprayers. General requirements and test methods
BS ISO 8036:2006. Optics and photonics. Microscopes. Immersion liquids for light microscopy
BS ISO 8038:2011. Microscopes. Screw threads for objectives and related nosepieces
BS ISO 8038-2:2001. Optics and optical instruments. Screw threads for microscope objectives and related nosepiecesScrew thread type M25 x 0,75 mm
BS ISO 8039:2012. Microscopes. Values, tolerances and symbols for magnification
BS ISO 8040:2001. Optics and optical instruments. Microscopes. Dimensions of tube slide and tube slot connections
BS ISO 8051:1999. Long shank taps with nominal diameters from M3 to M10. Full-diameter shank taps with recess
BS ISO 8058:1999. Air cargo. Insulated containers. Thermal efficiency requirements
BS ISO 806:2004. Aluminium oxide primarily used for the production of aluminium. Determination of loss of mass at 300 °C and 1000 °C
BS ISO 8066-2:2001. Rubber and plastics hoses and hose assemblies for automotive air conditioning. SpecificationRefrigerant 134a
BS ISO 8068:2006. Lubricants, industrial oils and related products (class L). Family T (turbines). Specification for lubricating oils for turbines
BS ISO 8070:2007. Milk and milk products. Determination of calcium, sodium, potassium and magnesium contents. Atomic absorption spectrometric method
BS ISO 8082:1994. Self-propelled machinery for forestry. Roll-over protective structures. Laboratory tests and performance requirements
BS ISO 8082:2003. Self-propelled machinery for forestry. Roll-over protective structures. Laboratory tests and performance requirements
BS ISO 8082-1:2009. Self-propelled machinery for forestry. Laboratory tests and performance requirements for roll-over protective structuresGeneral machines
BS ISO 8082-2:2011. Self-propelled machinery for forestry. Laboratory tests and performance requirements for roll-over protective structuresMachines having a rotating platform with a cab and boom on the platform
BS ISO 8083:2006. Machinery for forestry. Falling-object protective structures (FOPS). Laboratory tests and performance requirements
BS ISO 8084:2003. Machinery for forestry. Operator protective structures. Laboratory tests and performance requirements
BS ISO 8085-1:2001. Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. SpecificationsFittings for socket fusion using heated tools
BS ISO 8085-2:2001. Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. SpecificationsSpigot fittings for butt fusion, for socket fusion using heated tools and for use with eletrofusion fittings
BS ISO 8085-3:2001. Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. SpecificationsElectrofusion fittings
BS ISO 8086:2004. Dairy plant. Hygiene conditions. General guidance on inspection and sampling procedures
BS ISO 8096:2005. Rubber- or plastics-coated fabrics for water resistant clothing. Specification
BS ISO 8097:2001. Aircraft. Minimum airworthiness requirements and test conditions for certified air cargo unit load devices
BS ISO 8098:2002. Cycles. Safety requirements for bicycles for young children
BS ISO 8106:1985. Glass containers. Determination of capacity by gravimetric method. Test method
BS ISO 81060-2:2009. Non-invasive sphygmomanometersClinical validation of automated measurement type
BS ISO 81060-2:2013. Non-invasive sphygmomanometersClinical investigation of automated measurement type
BS ISO 8113:1985. Glass containers. Resistance to vertical load. Test method
BS ISO 8114:1990. Textile machinery and accessories. Spindles for ring-spinning and doubling machines. List of equivalent terms
BS ISO 8116-2:2008. Textile machinery and accessories. Beams for windingWarper's beams
BS ISO 8116-3:2008. Textile machinery and accessories. Beams for windingWeaver's beams
BS ISO 8116-4:2008. Textile machinery and accessories. Beams for windingTest methods and quality classification of flanges for weaver's beams, warper's beams and sectional beams
BS ISO 8116-5:2008. Textile machinery and accessories. Beams for windingSectional beams for warp knitting machines
BS ISO 8116-6:1990. Textile machinery and accessories. Beams for windingBeams for ribbon weaving and ribbon knitting. Terminology and main dimensions
BS ISO 8116-9:1991. Textile machinery and accessories. Beams for windingDyeing beams for textile fabrics
BS ISO 8117:2003. Textile machinery. Knitting machines. Nominal diameters of circular machines
BS ISO 8118:1986. Weaving machines. Temple cylinders
BS ISO 8118-1:2006. Textile machinery. Weaving machine templesTemple cylinders
BS ISO 8118-2:2006. Textile machinery. Weaving machine templesFull-width temples
BS ISO 8119-3:1992. Textile machinery and accessories. Needles for knitting machines. TerminologyCompound needles
BS ISO 812:2006. Rubber, vulcanized or thermoplastic. Determination of low-temperature brittleness
BS ISO 812:2011. Rubber, vulcanized or thermoplastic. Determination of low-temperature brittleness
BS ISO 8121:1986. Textile machinery. Knitting machines. Nameplate information
BS ISO 8121:2007. Textile machinery. Knitting machines. Nameplate information
BS ISO 8122:2003. Textile machinery. Knitting machines. Number of needles for circular knitting machines of large nominal diameter
BS ISO 8126:2000. Micrographics. Duplicating film, silver, diazo and vesicular. Visual density. Specifications and measurement.
BS ISO 8127-1:1989. Micrographics. A6 size microfilm jacketsFive-channel jacket for 16 mm microfilm
BS ISO 8127-2:1999. Micrographics. A6 size microfilm jacketsOther types of jacket for 16 mm and 35 mm microfilm
BS ISO 813:2010. Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90°C peel method
BS ISO 8131:1992. Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series. Tolerances
BS ISO 8132:1986. Hydraulic fluid power. Single rod cylinders, 160 bar (16 MPa) medium and 250 bar (25 MPa) series. Mounting dimensions for accessories (www.tecert.com)
BS ISO 8132:2006. Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series. Mounting dimensions for accessories
BS ISO 8133:1991. Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series. Accessory mounting dimensions
BS ISO 8133:2006. Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series. Mounting dimensions for accessories
BS ISO 8135:1999. Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series. Tolerances
BS ISO 8136:1986. Hydraulic fluid power. Single rod cylinders, 160 bar (16 MPa) medium series. Port dimensions
BS ISO 8137:1986. Hydraulic fluid power. Single rod cylinders, 250 bar (25 MPa) series. Port dimensions
BS ISO 8138:1998. Hydraulic fluid power. Single rod cylinders, 16 MPA (160 bar) compact series. Port dimensions
BS ISO 8139:1991. Pneumatic fluid power. Cylinders, 1000 kPa (10 bar) series. Rod end spherical eyes. Mounting dimensions
BS ISO 8139:2009. Pneumatic fluid power. Cylinders, 1000 kPa (10 bar) series. Mounting dimensions of rod-end spherical eyes
BS ISO 814:2007. Rubber, vulcanized or thermoplastic. Determination of adhesion to metal. Two-plate method
BS ISO 814:2011. Rubber, vulcanized or thermoplastic. Determination of adhesion to metal. Two-plate method
BS ISO 8140:1991. Pneumatic fluid power. Cylinders, 1 000 kPa (10 bar) series. Rod end clevis. Mounting dimensions
BS ISO 8140:2009. Pneumatic fluid power. Cylinders, 1000 kPa (10 bar) series. Mounting dimensions of rod-end clevises
BS ISO 81400-4:2005. Wind turbinesDesign and specification of gearboxes
BS ISO 815-1:2008. Rubber, vulcanized or thermoplastic. Determination of compression setAt ambient or elevated temperatures
BS ISO 815-2:2008. Rubber, vulcanized or thermoplastic. Determination of compression setAt low temperatures
BS ISO 8153-1:2009. Aerospace fluid systems and components. VocabularyHose assemblies
BS ISO 8156:2005. Dried milk and dried milk products. Determination of insolubility index
BS ISO 8162:1985. Glass containers. Tall crown finishes. Dimensions
BS ISO 8163:1985. Glass containers. Shallow crown finishes. Dimensions
BS ISO 8164:1990. Glass containers. 520 ml Euro-form bottles. Dimensions
BS ISO 8168:2008. Aerospace. Bolts, with MJ threads, made of heat and corrosion resisting steel, strength class 1100 MPa. Procurement specification
BS ISO 817:2005. Refrigerants. Designation system
BS ISO 8178-1:2006. Reciprocating internal combustion engines. Exhaust emission measurementTest-bed measurement of gaseous and particulate exhaust emissions
BS ISO 8178-10:2002. Reciprocating internal combustion engines. Exhaust emission measurementTest cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
BS ISO 8178-11:2006. Reciprocating internal combustion engines. Exhaust emission measurementTest-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
BS ISO 8178-2:2008. Reciprocating internal combustion engines. Exhaust emission measurementMeasurement of gaseous and particulate exhaust emissions under field conditions
BS ISO 8178-3:1994. Reciprocating internal combustion engines. Exhaust emission measurementDefinitions and methods of measurement of exhaust gas smoke under steady state conditions
BS ISO 8178-4:2007. Reciprocating internal combustion engines. Exhaust emission measurementSteady-state test cycles for different engine applications
BS ISO 8178-5:2008. Reciprocating internal combustion engines. Exhaust emission measurementTest fuels
BS ISO 8178-6:2000. Reciprocating internal combustion engines. Exhaust emission measurementReport of measuring results and test
BS ISO 8178-7:1996. Reciprocating internal combustion engines. Exhaust emission measurementEngine family determination
BS ISO 8178-8:1996. Reciprocating internal combustion engines. Exhaust emission measurementEngine group determination
BS ISO 8178-9:2000. Reciprocating internal combustion engines. Exhaust emission measurementTest cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transi ent conditions
BS ISO 8178-9:2012. Reciprocating internal combustion engines. Exhaust emission measurementTest cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
BS ISO 8179-1:2004. Ductile iron pipes. External zinc-based coatingMetallic zinc with finishing layer
BS ISO 8188:2007. Textile machinery and accessories. Pitches of knitting machines
BS ISO 8196-1:2009. Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysisAnalytical attributes of alternative methods
BS ISO 8196-2:2009. Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysisCalibration and quality control in the dairy laboratory
BS ISO 8196-3:2009. Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysisProtocol for the evaluation and validation of alternative quantitative methods of milk analysis
BS ISO 8216-1:2005. Petroleum products. Fuels (class F). ClassificationCategories of marine fuels
BS ISO 8216-1:2010. Petroleum products. Fuels (class F) classificationCategories of marine fuels
BS ISO 8216-99:2002. Petroleum products. Fuels (class F). ClassificationGeneral
BS ISO 8217:2005. Petroleum products. Fuels (class F). Specifications of marine fuels
BS ISO 8217:2010. Petroleum products. Fuels (class F). Specifications of marine fuels
BS ISO 8217:2012. Petroleum products. Fuels (class F). Specifications of marine fuels
BS ISO 8225:1995. Photography. Ammonia-processed diazo photographic film. Specifications for stability
BS ISO 8229:1991. Operations and baths relating to dry-cleaning machines. Vocabulary
BS ISO 8243:2003. Cigarettes. Sampling
BS ISO 8243:2006. Cigarettes. Sampling
BS ISO 8243:2013. Cigarettes. Sampling
BS ISO 8254-3:2004. Paper and board. Measurement of specular gloss20 degree gloss with a converging beam, TAPPI method
BS ISO 8255-1:2011. Microscopes. Cover glassesDimensional tolerances, thickness and optical properties
BS ISO 8255-2:2013. Microscopes. Cover glassesQuality of materials, standards of finish and mode of packaging
BS ISO 8257-1:1987. Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materialsDesignation
BS ISO 8257-2:1990. Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS ISO 8260:2008. Milk and milk products. Determination of organochlorine pesticides and polychlorobiphenyls. Method using capillary gas-liquid chromatography with electron- capture detection
BS ISO 8262-1:2005. Milk products and milk-based foods. Determination of fat content by the Weibull-Berntrop gravimetric method (reference method)Infant foods
BS ISO 8262-2:2005. Milk products and milk-based foods. Determination of fat content by the Weibull-Berntrop gravimetric method (reference method)Edible ices and ice-mixes
BS ISO 8262-3:2005. Milk products and milk-based foods. Determination of fat content by the Weibull-Berntrop gravimetric method (Reference method)Special cases
BS ISO 8267-1:2005. Aircraft. Tow bar attachment fittings interface requirementsMain line aircraft
BS ISO 8267-2:2005. Aircraft. Tow bar attachment fittings interface requirementsRegional aircraft
BS ISO 8277:2013. Ships and marine technology. Pipework and machinery. Information transfer
BS ISO 8279:2008. Aerospace. Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/ 235 °C, 1100 MPa (at ambient temperature)/315 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/730 °C, 1250 MPa(at ambient temperature)/235 °C and 1550 MPa (at ambient temperature)/600 °C."
BS ISO 8287:2011. Magnesium and magnesium alloys. Unalloyed magnesium. Chemical composition
BS ISO 8296:2003. Plastics. Film and sheeting. Determination of wetting tension
BS ISO 8297:1994. Acoustics. Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment. Engineering method
BS ISO 830:1999. Freight containers. Vocabulary
BS ISO 8310:2012. Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. General requirements for automatic tank thermometers on board marine carriers and floating storage
BS ISO 8312:1999. Rubber compounding ingredients. Stearic acid. Definition and test methods
BS ISO 832:1994. Information and documentation. Bibliographic description and references. Rules for the abbreviation of bibliographic terms
BS ISO 8323:1985. Freight containers. Air/surface (intermodel) general purpose containers. Specification and tests
BS ISO 8332:2006. Rubber compounding ingredients. Sulfur. Methods of test
BS ISO 8332:2011. Rubber compounding ingredients. Sulfur. Methods of test
BS ISO 8334:2007. Forestry machinery. Portable chain-saws. Determination of balance and maximum holding moment
BS ISO 8349:2002. Road vehicles. Measurement of road surface friction
BS ISO 8368:1999. Hydrometric determinations. Flow measurements in open channels using structures. Guidelines for the selection of structure
BS ISO 8371:1994. Iron ores. Determination of decrepitation index
BS ISO 8371:2007. Iron ores for blast furnace feedstocks. Determination of the decrepitation index
BS ISO 8373:2012. Robots and robotic devices. Vocabulary
BS ISO 8374:2001. Photography. Determination of ISO safelight conditions
BS ISO 8379:1998. Industrial trucks. Rough terrain trucks. Stability tests
BS ISO 839-1:2006. Milling machine arbors with 7/24 tapersDimensions and designation
BS ISO 8395:1995. Cinematography. Test films for the reproduction of 70 mm motion-picture release prints with magnetic stripes. Specifications
BS ISO 8404:2003. Tools for moulding. Angle pins
BS ISO 8404:2013. Tools for moulding. Angle pins
BS ISO 8405:1998. Tools for moulding. Ejector sleeves with cylindrical head. Basic series for general purposes
BS ISO 8405:2013. Tools for moulding. Ejector sleeves with cylindrical head. Basic series for general purposes
BS ISO 8406:2001. Tools for moulding. Mould bases. Round locating elements and spacers
BS ISO 8406:2008. Tools for moulding. Mould bases. Round locating elements and spacers
BS ISO 8407:2009. Corrosion of metals and alloys. Removal of corrosion products from corrosion test specimens
BS ISO 8419:2003. Belt drives. Narrow V-belts. Sections 9N/J, 15N/J and 25N/J (lengths in the effective system)
BS ISO 8422:2006. Sequential sampling plans for inspection by attributes
BS ISO 8423:2008. Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
BS ISO 8426:2008. Hydraulic fluid power. Positive displacement pumps and motors. Determination of derived capacity
BS ISO 8432:1987. Essential oils. Analysis by high performance liquid chromatography. General method
BS ISO 8434-2:1994. Metallic tube connections for fluid power and general use37° flared fittings
BS ISO 8434-2:2007. Metallic tube connections for fluid power and general use37° flared connectors
BS ISO 8434-3:1995. Metallic tube connections for fluid power and general useO-ring face seal fittings
BS ISO 8434-3:2005. Metallic tube connections for fluid power and general useO-ring face seal connectors
BS ISO 8434-6:2009. Metallic tube connections for fluid power and general use60° cone connectors with or without O-ring
BS ISO 8439:1990. Forms design. Basic layout
BS ISO 844:1998. Cellular plastics. Compression test for rigid materials. Specification
BS ISO 844:2001. Cellular plastics. Compression test for rigid materials. Specification
BS ISO 844:2004. Rigid cellular plastics. Determination of compression properties
BS ISO 8443:1999. Rolling bearings. Radial ball bearings with flanged outer ring. Flange dimensions
BS ISO 8443:2010. Rolling bearings. Radial ball bearings with flanged outer ring. Flange dimensions
BS ISO 8454:2007+A1:2009. Cigarettes. Determination of carbon monoxide in the vapour phase of cigarette smoke. NDIR method
BS ISO 8455:2011. Green coffee. Guidelines for storage and transport
BS ISO 8459:2009. Information and documentation. Bibliographic data element directory for use in data exchange and enquiry
BS ISO 8459-2:1992. Information and documentation. Bibliographic data element directoryAcquisitions applications
BS ISO 8459-3:1994. Information and documentation. Bibliographic data element directoryInformation retrieval applications
BS ISO 8468:2007. Ships and marine technology. Ship's bridge layout and associated equipment. Requirements and guidelines
BS ISO 8470:2006. Road vehicles M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings
BS ISO 8486-1:1996. Bond abrasives. Determination and designation of grain size distributionMacrogrits F4 to F220
BS ISO 8486-2:1996. Bond abrasives. Determination and designation of grain size distributionMacrogrits F230 to F1200
BS ISO 8486-2:2007. Bonded abrasives. Determination and designation of grain size distributionMicrogrits F230 to F2000
BS ISO 8511:2011. Rubber compounding ingredients. Carbon black. Determination of pellet size distribution
BS ISO 8514-1:1992. Micrographics. Alphanumeric computer output microforms. Quality controlCharacteristics of the test slide and test data
BS ISO 8514-1:2000. Micrographics. Alphanumeric computer output microforms. Quality controlCharacteristics of the test slide and test data
BS ISO 8514-2:1992. Micrographics. Alphanumeric computer output microforms. Quality controlMethod
BS ISO 8514-2:2000. Micrographics. Alphanumeric computer output microforms. Quality controlMethod
BS ISO 8516:2011. Textile glass. Textured yarns. Basis for a specification
BS ISO 8518:2001. Workplace air. Determination of particulate lead and lead compounds. Flame or electrothermal atomic absorption spectrometric method
BS ISO 8525:2008. Airborne noise emitted by machine tools. Operating conditions for metal-cutting machines
BS ISO 8528-1:2005. Reciprocating internal combustion engine driven alternating current generating setsApplication, ratings and performance
BS ISO 8528-2:2005. Reciprocating internal combustion engine driven alternating current generating setsEngines
BS ISO 8528-3:2005. Reciprocating internal combustion engine driven alternating current generating setsAlternating current generators for generating sets
BS ISO 8528-4:2005. Reciprocating internal combustion engine driven alternating current generating setsControlgear and switchgear
BS ISO 8528-5:2005. Reciprocating internal combustion engine driven alternating current generating setsGenerating sets
BS ISO 8528-5:2013. Reciprocating internal combustion engine driven alternating current generating setsGenerating sets
BS ISO 8528-6:2005. Reciprocating internal combustion engine driven alternating current generating setsTest methods
BS ISO 8529-1:2001. Reference neutron radiationsCharacteristics and methods of production
BS ISO 8529-2:2000. Reference neutron radiationsCalibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field
BS ISO 8529-3:1998. Reference neutron radiationsCalibration of area and personal dosimeters and determination of their response as a function of neutron energy and angle of incidence
BS ISO 8532:1995. Securities. Format for transmission of certificate numbers
BS ISO 8535-1:1996. Compression ignition engines. Steel tubes for high pressure fuel injection pipesRequirements for seamless cold drawn single wall tubes
BS ISO 8535-1:2006. Diesel engines. Steel tubes for high-pressure fuel injection pipesRequirements for seamless cold-drawn single-wall tubes
BS ISO 8535-1:2011. Diesel engines. Steel tubes for high-pressure fuel injection pipesRequirements for seamless colddrawn single-wall tubes
BS ISO 8535-2:2003. Compression ignition engines. Steel tubes for high pressure fuel injection pipesRequirements for composite tubes
BS ISO 8536-12:2007+A1:2013. Infusion equipment for medical useCheck valves
BS ISO 8536-7:2009. Infusion equipment for medical useCaps made of aluminium-plastics combinations for infusion bottles
BS ISO 8543:1998. Textile floor coverings. Methods for determination of mass
BS ISO 8548-4:1998. Prosthetics and orthotics. Limb deficiencies.Description of causal conditions leading to amputation
BS ISO 8548-5:2003. Prosthetics and orthotics. Limb deficiencies.Description of the clinical condition of the person who has had an amputation
BS ISO 855:2003. Oil of lemon [Citrus limon (L.) Burm. f.], obtained by expression
BS ISO 8551:2003. Prosthetics and orthotics. Functional deficiencies. Description of the person to be treated with an orthosis, clinical objectives of treatment, and functional requirements of the orthosis
BS ISO 8552:2004. Milk. Estimation of psychrotrophic microorganisms. Colony-count technique at 21°C (rapid method)
BS ISO 8553:2004. Milk. Enumeration of microorganisms. Plate-loop technique at 30°C
BS ISO 856:2006. Oil of peppermint (Mentha x piperita L.)
BS ISO 8566-4:1998. Cranes. CabinsJib cranes
BS ISO 8567:2002. Cinematography. Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints. Position and dimensions
BS ISO 8568:2007. Mechanical shock. Testing machines. Characteristics and performance
BS ISO 857-2:2005. Welding and allied processes. VocabularySoldering and brazing processes and related terms
BS ISO 8573-1:2001. Compressed airContaminants and purity classes
BS ISO 8573-1:2010. Compressed airContaminants and purity classes
BS ISO 8573-2:1996. Compressed air for general useTest methods for aerosol oil content
BS ISO 8573-2:2007. Compressed airTest methods for oil aerosol content
BS ISO 8573-3:1999. Compressed airTest methods for measurement of humidity
BS ISO 8573-4:2001. Compressed airTest methods for solid particle content
BS ISO 8573-5:2001. Compressed airTest methods for oil vapour and organic solvent content
BS ISO 8573-6:2003. Compressed airTest methods for gaseous contaminant content
BS ISO 8573-7:2003. Compressed airTest method for viable microbiological contaminant content
BS ISO 8573-8:2004. Compressed airTest methods for solid particle content by mass concentration
BS ISO 8573-9:2004. Compressed airTest methods for liquid water content
BS ISO 8574:2004. Aerospace. Hydraulic system tubing. Qualification tests for bent tubes
BS ISO 8578:2012. Microscopes. Marking of objectives and eyepieces
BS ISO 8579-1:2002. Acceptance code for gear unitsTest code for airborne sound
BS ISO 8581:1994. Photography. Electronic flash equipment. Connectors to synchro-cord
BS ISO 8584-1:1990, BS 2782-11:Methods 1160A & B. Thermoplastics pipes for industrial applications under pressure. Determination of the chemical resistance factor and of the basic stressPolyolefin pipes
BS ISO 8586:2012. Sensory analysis. General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors
BS ISO 8587:2006+A1:2013. Sensory analysis. Methodology. Ranking
BS ISO 8590:1994. Cinematography. Audio records on 70 mm motion picture release prints with magnetic stripes. Recorded characteristic
BS ISO 860:2007. Terminology work. Harmonization of concepts and terms
BS ISO 8600-1:1997. Optics and optical instruments. Medical endoscopes and endoscopic accessoriesGeneral requirements
BS ISO 8600-1:2005. Optics and photonics. Medical endoscopes and endotherapy devicesGeneral requirements
BS ISO 8600-1:2013. Endoscopes. Medical endoscopes and endotherapy devicesGeneral requirements
BS ISO 8600-2:2002. Optics and optical instruments. Medical endoscopes and endoscopic accessoriesParticular requirements for rigid bronchoscopes
BS ISO 8600-4:1997. Optics and optical instruments. Medical endoscopes and endoscopic accessoriesDetermination of maximum width of insertion portion
BS ISO 8600-5:2005. Optics and photonics. Medical endoscopes and endotherapy devicesDetermination of optical resolution of rigid endoscopes with optics
BS ISO 8600-6:2005. Optics and photonics. Medical endoscopes and endotherapy devicesVocabulary
BS ISO 8600-7:2012. Endoscopes. Medical endoscopes and endotherapy devicesBasic requirements for medical endoscopes of water-resistant type
BS ISO 8601:2004. Data elements and interchange formats. Information interchange. Representation of dates and times
BS ISO 8605:2001. Textile-glass-reinforced plastics. Sheet moulding compound (SMC). Basis for specification
BS ISO 8611:1991. General-purpose flat pallets for through transit of goods. Test methods
BS ISO 8622:1998. Cinematography. Magnetic sound records on 70 mm motion-picture release prints with magnetic stripes. A-chain reproduction characteristics
BS ISO 8625-4:2011. Aerospace. Fluid systems. VocabularyGeneral terms and definitions relating to control/actuation systems
BS ISO 8636-2:2007. Machine tools. Test conditions for bridge-type milling machines. Testing of the accuracyTravelling bridge (gantry-type) machines
BS ISO 8640-1:1990. Textile machinery and accessories. Flat warp knitting machines. VocabularyDriving mechanisms, supports and knitting elements
BS ISO 8640-1:2004. Textile machinery and accessories. Flat warp knitting machinesVocabulary of basic structure and knitting elements
BS ISO 8640-2:1990. Textile machinery and accessories. Flat warp knitting machines. VocabularyWarp let-off, fabric take-up and batching
BS ISO 8640-2:2004. Textile machinery and accessories. Flat warp knitting machinesVocabulary of warp let-off, fabric take-up and batching
BS ISO 8640-3:2002. Textile machinery and accessories. Flat warp knitting machines. VocabularyVocabulary of patterning devices
BS ISO 8641:2008. Aerospace. Self-locking nuts with maximum operating temperature greater than 425 °C. Procurement specification
BS ISO 8642:2008. Aerospace. Self-locking nuts with maximum operating temperature greater than 425 degrees C. Test methods
BS ISO 8660:2002. Plastics. Determination of permanganate absorption number of caprolactam. Spectrometric method
BS ISO 8664:2005+A1:2010. Tyres for agricultural tractors and machines. Code-designated and service-description marked radial drive-wheel tyres
BS ISO 8670-3:2000. Ostomy collection bagsDetermination of odour transmission of colostomy and ileostomy bags
BS ISO 8693:1998. Tools for moulding. Flat ejector pins
BS ISO 8693:2011. Tools for moulding. Flat ejector pins
BS ISO 8694:1998. Tools for moulding. Shouldered ejector pins
BS ISO 8694:2011. Tools for moulding. Shouldered ejector pins
BS ISO 8695:2010. Tools for pressing. Punches. Nomenclature and terminology
BS ISO 8697:1999. Crude petroleum and petroleum products. Transfer accountability. Assessment of on board quantity (OBQ) and quantity remaining on board (ROB)
BS ISO 8705:2005. Mopeds. Measurement methods for location of centre of gravity
BS ISO 8709:2010. Mopeds. Brakes and brake systems. Tests and measurement methods
BS ISO 871:1996. Plastics. Determination of ignition temperature using a hot-air furnace
BS ISO 871:2006. Plastics. Determination of ignition temperature using a hot-air furnace
BS ISO 8710:2010. Motorcycles. Brakes and brake systems. Tests and measurement methods
BS ISO 8727:1997. Mechanical vibration and shock. Human exposure. Biodynamic coordinate systems
BS ISO 8729-1:2010. Ships and marine technology. Marine radar reflectorsPassive type
BS ISO 8729-2:2009. Ships and marine technology. Marine radar reflectorsActive type
BS ISO 8730:1990. Banking. Requirements for message authentication (wholesale)
BS ISO 875:1999. Essential oils. Evaluation of miscibility in ethanol
BS ISO 8759-2:1998. Agricultural wheeled tractors. Front-mounted equipmentStationary equipment connection
BS ISO 8764-1:1999. Assembly tools for screws and nuts. Screwdrivers for cross-recessed head screwsDriver points
BS ISO 8769:2010. Reference sources. Calibration of surface contamination monitors. Alpha-, beta- and photon emitters
BS ISO 8778:2003. Pneumatic fluid power. Standard reference atmosphere
BS ISO 8779:2010. Plastics piping systems. Polyethylene (PE) pipes for irrigation. Specifications
BS ISO 8784-1:2005. Pulp, paper and board. Microbiological examinationTotal count of bacteria, yeast and mould based on disintegration
BS ISO 8788:2000. Aerospace. Nuts, metric. Tolerances of form and position
BS ISO 8789:1994. Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification
BS ISO 8789:2009. Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification
BS ISO 8791-3:2005. Paper and board. Determination of roughness/smoothness (air leak methods)Sheffield method
BS ISO 8791-4:2007. Paper and board. Determination of roughness/smoothness (air leak methods)Print-surf method
BS ISO 8802-12:1998. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirementsDemand-priority access method, physical layer and repeater specifications
BS ISO 8802-2:1989. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirementsLogical link control
BS ISO 8802-3:1989. Information processing systems. Local area networks.Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications
BS ISO 8802-7:1991. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirementsSlotted ring access method and physical layer specification
BS ISO 8805:1988. Information processing systems. Computer graphics. Graphical kernel system for three dimensions (GKS-3D) functional description
BS ISO 8807:1989. Information processing systems. Open systems interconnection. LOTOS. A formal description technique based on the temporal ordering of observational behaviour
BS ISO 8816:1993+A1:2012, ISO 8816:1993. Aircraft. Solid-state remote power controllers. General requirements
BS ISO 8820-1:2008. Road vehicles. Fuse-linksDefinitions and general test requirements
BS ISO 8820-2:2005. Road vehicles. Fuse-linksUser's guide
BS ISO 8820-3:2010. Road vehicles. FuselinksFuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)
BS ISO 8820-4:2010. Road vehicles. Fuse-linksFuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures
BS ISO 8820-5:2007. Road vehicles. Fuse-linksFuse-links with axial terminals (strip fuse-links) types SF 30 and SF 51 and test fixtures
BS ISO 8820-6:2007. Road vehicles. Fuse-linksSingle-bolt fuse-links
BS ISO 8820-7:2007. Road vehicles. Fuse-linksFuse-links with tabs (Type G) with rated voltage of 450 V
BS ISO 8820-8:2012. Road vehicles. Fuse-linksFuse-links with bolt-in contacts (Type H and J) with rated voltage of 450 V
BS ISO 8829-1:2009. Aerospace. Test methods for polytetraflouroethylene (PTFE) inner-tube hose assembliesMetallic (stainless steel) braid
BS ISO 8829-2:2006. Aerospace. Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assembliesNon-metallic braid
BS ISO 883:2013. Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole. Dimensions
BS ISO 8831:1989. Information processing systems. Open systems interconnection. Job transfer and manipulation concepts and services
BS ISO 8832:1989. Information processing systems. Open systems interconnection. Specification of the Basic Class Protocol for Job Transfer and Manipulation
BS ISO 8835-2:1999. Inhalational anaesthesia systemsAnaesthetic breathing systems for adults
BS ISO 8843:2005+A1:2012. Aircraft. Crimp-removable contacts for electrical connectors. Identification system
BS ISO 885:2000. General purpose bolts and screws. Metric series. Radii under the head
BS ISO 8854:2012. Road vehicles. Alternators with regulators. Test methods and general requirements
BS ISO 8855:2011. Road vehicles. Vehicle dynamics and road-holding ability. Vocabulary
BS ISO 8858-3:2004. Hard coal. Froth flotation testingRelease evaluation
BS ISO 8870:2006. Milk and milk-based products. Detection of thermonuclease produced by coagulase-positive staphylococci
BS ISO 888:2012. Fasteners. Bolts, screws and studs. Nominal lengths and thread lengths
BS ISO 8893:1997. Forestry machinery. Portable brush cutters and grass trimmers. Engine performance and fuel consumption
BS ISO 8897:2010. Oil of juniper berry (Juniperus communis L.)
BS ISO 8899:2003. Oil of lemon petitgrain [Citrus limon (L.) Burm.f.]
BS ISO 8900:2005. Oil of bergamot petitgrain [Citrus bergamia (Risso et Poit.)]
BS ISO 8902:2009. Oil of lavandin Grosso (Lavandula angustifolia Mill. x Lavandula latifolia Medik.), French type
BS ISO 8913:2006. Aerospace. Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400°F/3000 psi (204°C/20684 kPa) and 204°C/21000 kPa (400°F/3046 psi). Procurement specification
BS ISO 8942:2010. Rubber compounding ingredients. Carbon black. Determination of individual pellet crushing strength
BS ISO 8943:2007. Refrigerated light hydrocarbon fluids. Sampling of liquefied natural gas. Continuous and intermittent methods
BS ISO 8957:1996. Information and documentation. Hebrew alphabet coded character sets for bibliographic information interchange
BS ISO 8967:2005. Dried milk and dried milk products. Determination of bulk density
BS ISO 897:1988. Photography. Roll films, 126, 110 and 135 size films. Identification of the image-bearing side
BS ISO 897:2000. Photography. Roll films, 126, 110 and 135- size films. Identification of the image-bearing side
BS ISO 8976:2004. Pliers and nippers. Multiple slip joint pliers. Dimensions and test values
BS ISO 8977:2003. Tools for pressing. Matrixes
BS ISO 8979:2004. Pliers and nippers for electronics. Nomenclature
BS ISO 8992:2005. Fasteners. General requirements for bolts, screws, studs and nuts
BS ISO 8995:2002. Lighting of indoor work places
BS ISO 8999:2001. Reciprocating internal combustion engines. Graphical symbols
BS ISO 9000-2:1997. Quality management and quality assurance standardsGeneric guidelines for the application of ISO 9001, ISO 9002 and ISO 9003
BS ISO 9005:2007. Nuclear energy. Uranium dioxide powder and sintered pellets. Determination of oxygen/uranium atomic ratio by the amperometric method
BS ISO 9019:1995. Securities. Numbering of certificates
BS ISO 9022-1:1994. Optics and optical instruments. Environmental test methodsDefinitions, extent of testing
BS ISO 9022-1:2012. Optics and photonics. Environmental test methodsDefinitions, extent of testing
BS ISO 9022-10:1994. Optics and optical instruments. Environmental test methodsCombined sinusoidal vibration, dry heat or cold
BS ISO 9022-10:1998. Optics and optical instruments. Environmental test methodsCombined sinusoidal vibration and dry heat or cold
BS ISO 9022-11:1994. Optics and optical instruments. Environmental test methodsMould growth
BS ISO 9022-12:1994. Optics and optical instruments. Environmental test methodsContamination
BS ISO 9022-13:1994. Optics and optical instruments. Environmental test methodsCombines shock, bump or free-fall, dry heat or cold
BS ISO 9022-13:1998. Optics and optical instruments. Environmental test methodsCombined shock, bump or free fall and dry heat or cold
BS ISO 9022-14:1994. Optics and optical instruments. Environmental test methodsDew, hoarfrost, ice
BS ISO 9022-15:1994. Optics and optical instruments. Environmental test methodsCombined random vibration wide band: reproducibility, medium, in dry heat or cold
BS ISO 9022-15:1998. Optics and optical instruments. Environmental test methodsCombined digitally controlled broad-band random vibration and dry heat or cold
BS ISO 9022-16:1994. Optics and optical instruments. Environmental test methodsCombined bounce or steady-state acceleration, in dry heat or cold
BS ISO 9022-16:1998. Optics and optical instruments. Environmental test methodsCombined bounce or steady-state acceleration and dry heat or cold
BS ISO 9022-17:1994. Optics and optical instruments. Environmental test methodsCombined contamination, solar radiation
BS ISO 9022-18:1994. Optics and optical instruments. Environmental test methodsCombined damp heat and low internal pressure
BS ISO 9022-19:1994. Optics and optical instruments. Environmental test methodsTemperature cycles combined with sinusoidal or random vibration
BS ISO 9022-2:1994. Optics and optical instruments. Environmental test methodsCold, heat, humidity
BS ISO 9022-2:2002. Optics and optical instruments. Environmental test methodsCold, heat and humidity
BS ISO 9022-20:1997. Optics and optical instruments. Environmental test methodsHumid atmosphere containing sulfur dioxide or hydrogen sulfide
BS ISO 9022-21:1998. Optics and optical instruments. Environmental test methodsCombined low pressure and ambient temperature or dry heat
BS ISO 9022-22:2012. Optics and photonics. Environmental test methodsCombined cold, dry heat or temperature change with bump or random vibration
BS ISO 9022-3:1994. Optics and optical instruments. Environmental test methodsMechanical stress
BS ISO 9022-3:1998. Optics and optical instruments. Environmental test methodsMechanical stress
BS ISO 9022-4:1994. Optics and optical instruments. Environmental test methodsSalt mist
BS ISO 9022-4:2002. Optics and optical instruments. Environmental test methodsSalt mist
BS ISO 9022-5:1994. Optics and optical instruments. Environmental test methodsCombined cold, low air pressure
BS ISO 9022-6:1994. Optics and optical instruments. Environmental test methodsDust
BS ISO 9022-7:1994. Optics and optical instruments. Environmental test methodsDrip, rain
BS ISO 9022-7:2005. Optics and photonics. Environmental test methodsResistance to drip or rain
BS ISO 9022-8:1994. Optics and optical instruments. Environmental test methodsHigh pressure, low pressure, immersion
BS ISO 9022-9:1994. Optics and optical instruments. Environmental test methodsSolar radiation
BS ISO 9026:2007. Raw rubber or unvulcanized compounds. Determination of green strength
BS ISO 9028:2006. Rubber. Dissolution by acid digestion
BS ISO 9039:1994. Optics and optical instruments. Quality evaluation of optical systems. Determination of distortion
BS ISO 9039:2008. Optics and photonics. Quality evaluation of optical systems. Determination of distortion
BS ISO 9040:1990. Information technology. Open systems interconnection. Virtual terminal basic class service
BS ISO 9041-1:1990. Information technology. Open systems interconnection. Virtual terminal basic class protocolSpecification
BS ISO 9043:2008. Mopeds. Measurement method for moments of inertia
BS ISO 9044:1999. Industrial woven wire cloth. Technical requirements and testing
BS ISO 9056:1990. Glass containers. Series of pilferproof finish. Dimensions
BS ISO 9057:1991. Glass containers. 28mm tamper-evident finish for pressurized liquids. Dimensions
BS ISO 9058:1992. Glass containers. Tolerances
BS ISO 9058:2008. Glass containers. Standard tolerances for bottles
BS ISO 9073-11:2002. Textiles. Test methods for nonwovensRun-off
BS ISO 9073-12:2002. Textiles. Test methods for nonwovensDemand absorbency
BS ISO 9074:1989. Information processing systems. Open systems interconnection. Estelle: a formal description technique based on an extended state transition model
BS ISO 9083:2001. Calculation of load capacity of spur and helical gears. Application to marine gears
BS ISO 9084:2000. Calculation of load capacity of spur and helical gears. Application to high speed gears and gears of similar requirements
BS ISO 9085:2002. Calculation of load capacity of spur and helical gears. Application for industrial gears
BS ISO 9096:2003. Stationary source emissions. Manual determination of mass concentration of particulate matter
BS ISO 9100:1992. Wide-mouth glass containers. Vacuum lug finishes. Dimensions
BS ISO 9102:1997. Diesel engines. Screw-in injection nozzle holders types 24, 25, 26 and 26.1
BS ISO 9112:2008. Truck and bus tyres. Methods of measuring tyre rolling circumference. Loaded new tyres
BS ISO 9116:2004. Green coffee. Guidelines on methods of specification
BS ISO 9123:2001. Measurement of liquid flow in open channels. Stage-fall-discharge relationships
BS ISO 9128:2006. Road vehicles. Graphical symbols to designate brake fluid types
BS ISO 9129:2008. Motorcycles. Measurement methods for moments of inertia
BS ISO 9130:2005. Motorcycles. Measurement method for location of centre of gravity
BS ISO 9136-1:2004. Abrasive grains. Determination of bulk densityMacrogrits
BS ISO 9136-2:2000. Abrasive grains. Determination of bulk densityMicrogrits
BS ISO 9144:1991. Securities. Optical character recognition line. Position and structure
BS ISO 9162:2013. Petroleum products. Fuels (class F). Liquefied petroleum gases. Specifications
BS ISO 9181:2007. Tools for pressing. Round punches with 60° conical head and reduced shank
BS ISO 9183-1:2008. Tools for pressing. Wear plates for press diesType A
BS ISO 9183-2:2011. Tools for pressing. Wear plates for press diesType B
BS ISO 9186:2001. Graphical symbols. Test methods for judged comprehensibility and for comprehension
BS ISO 9186-1:2007. Graphical symbols. Test methodsMethods for testing comprehensibility
BS ISO 9186-2:2008. Graphical symbols. Test methodsMethod for testing perceptual quality
BS ISO 9197:1998. Paper, board and pulps. Determination of water-soluble chlorides
BS ISO 9197:2006. Paper and board. Determination of water-soluble chlorides
BS ISO 9198:2001. Paper, board and pulp. Determination of water-soluble sulfates
BS ISO 9207:1995. Manually portable chain-saws with internal combustion engine. Determination of sound power levels. Engineering method (grade 2)
BS ISO 9211-1:1994. Optics and optical instruments. Optical coatings.Definitions
BS ISO 9211-1:2010. Optics and photonics. Optical coatingsDefinitions
BS ISO 9211-2:1994. Optics and optical instruments. Optical coatings.Optical properties
BS ISO 9211-2:2010. Optics and photonics. Optical coatingsOptical properties
BS ISO 9211-3:1994. Optics and optical instruments. Optical coatings.Environmental durability
BS ISO 9211-3:2008. Optics and photonics. Optical coatingsEnvironmental durability
BS ISO 9211-4:1996. Optics and optical instruments. Optical coatings.Specific test methods
BS ISO 9211-4:2006. Optics and optical instruments. Optical coatingsSpecific test methods
BS ISO 9211-4:2012. Optics and photonics. Optical coatingsSpecific test methods
BS ISO 9213:2004. Measurement of total discharge in open channels. Electromagnetic method using a full-channel-width coil
BS ISO 923:2000. Coal cleaning equipment. Performance evaluation
BS ISO 9230:1991. Information and documentation. Determination of price indexes for books and serials purchased by libraries
BS ISO 9230:2007. Information and documentation. Determination of price indexes for print and electronic media purchased by libraries
BS ISO 9231:2008. Milk and milk products. Determination of the benzoic and sorbic acid contents
BS ISO 9232:2003. Yogurt. Identification of characteristic microorganisms (Lactobacillus delbrueckii subsp. bulgaricus and Streptococcus thermophilus)
BS ISO 9236-1:2004. Photography. Sensitometry of screen/film systems for medical radiographyDetermination of sensitometric curve shape, speed and average gradient
BS ISO 9236-3:1999. Photography. Sensitometry of screen/film systems for medical radiographyDetermination of sensitometric curve shape, speed and average gradient for mammography
BS ISO 9239-1:1997. Reaction to fire tests. Horizontal surface spread of flame on floor-covering systemsFlame spread using a radiant heat ignition source
BS ISO 9244:2008. Earth-moving machinery. Machine safety labels. General principles
BS ISO 9249:2007. Earth-moving machinery. Engine test code. Net power
BS ISO 9255:2008. Aerospace. Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
BS ISO 9261:2003. Agricurltural irrigation equipment. Emitters and emitting pipe. Specification and test methods
BS ISO 9276-1:1998, ISO 9276-1:1998. Representation of results of particle size analysisGraphical representation
BS ISO 9276-2:2001. Representation of results of particle size analysisCalculation of average particle sizes/diameters and moments from particle size distributions
BS ISO 9276-3:2008. Representation of results of particle size analysisAdjustment of an experimental curve to a reference model
BS ISO 9276-4:2001. Representation of results of particle size analysisCharacterization of a classification process
BS ISO 9276-5:2005. Representation of results of particle size analysisMethods of calculation relating to particle size analyses using logarithmic normal probability distribution
BS ISO 9276-6:2008. Representation of results of particle size analysisDescriptive and quantitative representation of particle shape and morphology
BS ISO 9277:2010. Determination of the specific surface area of solids by gas adsorption. BET method
BS ISO 9282-1:1988. Information processing. Coded representation of pictures.Encoding principles for picture representation in a 7-bit or 8-bit environment
BS ISO 9284:2013. Abrasive grains. Test-sieving machines
BS ISO 9285:1997. Abrasive grains and crude. Chemical analysis of fused aluminium oxide
BS ISO 9286:1997. Abrasive grains and crude. Chemical analysis of silicon carbide
BS ISO 9291:1996. Textile-glass-reinforced plastics. Rovings. Preparation of unidirectional plates by winding
BS ISO 9308-2:2012. Water quality. Enumeration of Escherichia coli and coliform bacteriaMost probable number method
BS ISO 9334:1995. Optics and optical instruments. Optical transfer function. Definitions and mathematical relationships
BS ISO 9334:2007. Optics and photonics. Optical transfer function. Definitions and mathematical relationships
BS ISO 9334:2012. Optics and photonics. Optical transfer function. Definitions and mathematical relationships
BS ISO 9335:1995. Optics and optical instruments. Optical transfer function. Principles and procedures of measurement
BS ISO 9335:2012. Optics and photonics. Optical transfer function. Principles and procedures of measurement
BS ISO 9336-1:1994. Optics and optical instruments. Application. Optical transfer function.Interchangeable lenses for 35 mm still cameras
BS ISO 9336-1:2010. Optics and photonics. Optical transfer function. ApplicationInterchangeable lenses for 35 mm still cameras
BS ISO 9336-2:1994. Optics and optical instruments. Application. Optical transfer function.Lenses for office copiers
BS ISO 9336-3:1994. Optics and optical instruments. Application. Optical transfer function.Telescopes
BS ISO 9343:2004. Pliers and nippers. Slip joint pliers. Dimensions and test values
BS ISO 9344:2011. Microscopes. Graticules for eyepieces
BS ISO 9345-1:2012. Microscopes. Imaging distances related to mechanical reference planesTube length 160 mm
BS ISO 9345-2:2003. Optics and optical instruments. Microscopes. Imaging distances related to mechanical reference planesInfinity-corrected optical systems
BS ISO 9349:2004. Preinsulated ductile iron pipeline systems
BS ISO 9352:2012. Plastics. Determination of resistance to wear by abrasive wheels
BS ISO 9358:1994. Optics and optical instruments. Veiling glare of image forming systems. Definitions and methods of measurement
BS ISO 9361-2:2011. Indexable inserts for cutting tools. Ceramic inserts with rounded cornersDimensions of inserts with cylindrical fixing hole
BS ISO 9362:1994. Banking. Banking telecommunication messages. Bank identifier codes
BS ISO 9362:2009. Banking. Banking telecommunication messages. Business identifier code (BIC)
BS ISO 9370:1997. Plastics. Instrumental determination of radiant exposure in weathering tests. General guidance and basic test method
BS ISO 9393-1:2004. Thermoplastics valves for industrial applications. Pressure test methods and requirementsGeneral
BS ISO 9398-1:2003. Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristicsFlatwork ironing machines
BS ISO 9398-2:2003. Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristicsBatch drying tumblers
BS ISO 9398-3:2003. Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristicsWashing tunnels
BS ISO 9398-4:2003. Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristicsWasher-extractors
BS ISO 9403:2000. Crude petroleum. Transfer accountability. Guidelines for cargo inspection
BS ISO 9413:2012+A1:2012. Tyre valves. Dimensions and designation
BS ISO 9416:2009. Paper. Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)
BS ISO 9449:2007. Tools for moulding. Centring sleeves
BS ISO 9459-4:2013. Solar heating. Domestic water heating systemsSystem performance characterization by means of component tests and computer simulation
BS ISO 9459-5:2007. Solar heating. Domestic water heating systemsSystem performance characterization by means of whole-system tests and computer simulation
BS ISO 9462:1993. Alpine ski-bindings. Safety requirements and test methods
BS ISO 9462:2006+A1:2009. Alpine ski bindings. Requirements and test methods
BS ISO 9465:2012. Alpine ski-bindings. Lateral release under impact loading. Test method
BS ISO 9512:2002. Cigarettes. Determination of ventilation. Definitions and measurement principles
BS ISO 9517:2007. Iron ores. Determination of water-soluble chloride content. Ion-selective electrode method
BS ISO 9518:1998. Forestry machinery. Portable chain-saws. Kickback test
BS ISO 9523:2008. Touring ski-boots for adults. Interface with touring ski-bindings. Requirements and test methods
BS ISO 9533:2010. Earth-moving machinery. Machine-mounted audible travel alarms and forward horns. Test methods and performance criteria
BS ISO 9564-1:2011. Financial services. Personal identification number (PIN) management and securityBasic principles and requirements for PINs in card-based systems
BS ISO 9564-2:2005. Banking. Personal identification number management and securityApproved algorithms for PIN encipherment
BS ISO 9568:1993. Cinematography. Background acoustic noise levels in the theatres, review rooms and dubbing rooms
BS ISO 9587:1999. Metallic and other inorganic coatings. Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
BS ISO 9587:2007. Metallic and other inorganic coatings. Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
BS ISO 9588:1999. Metallic and other inorganic coatings. Post-coating treatments of iron and steel to reduce the risk of hydrogen embrittlement
BS ISO 9588:2007. Metallic and other inorganic coatings. Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement
BS ISO 96-1:1992. Textile machinery and accessories. Rings and travellers for ring spinning and ring doubling framesT-rings and their appropriate travellers
BS ISO 96-1:2009. Textile machinery and accessories. Rings and travellers for ring spinning and ring twisting framesFlange rings T and SF and their travellers
BS ISO 9611:1996. Acoustics. Characterization of sources of structure-borne sound with respect to sound radiation from connected structures. Measurement of velocity at the contact points of machinery when resiliently mounted
BS ISO 96-2:1992. Textile machinery and accessories. Rings and travellers for ring spinning and ring doubling framesHZCH-, HZ- and J- rings and their appropriate travellers
BS ISO 96-2:2009. Textile machinery and accessories. Rings and travellers for ring spinning and ring twisting framesHZ- and J-rings and their travellers
BS ISO 9622:1999. Whole milk. Determination of milkfat, protein and lactose content. Guidance on the operation of mid-infrared instruments
BS ISO 9622:2013. Milk and liquid milk products. Guidelines for the application of mid-infrared spectrometry
BS ISO 9628:2006+A1:2011. Rolling bearings. Insert bearings and eccentric locking collars. Boundary dimensions and tolerances
BS ISO 9631:2004. Rubber seals. Joint rings for pipelines for hot water supply, drainage and sewerage pipelines up to 110°C. Specifications for the material
BS ISO 9633:2001. Cycle chains. Characteristics and test methods
BS ISO 9635-1:2006. Agricultural irrigation equipment. Irrigation valvesGeneral requirements
BS ISO 9635-2:2006. Agricultural irrigation equipment. Irrigation valvesIsolating valves
BS ISO 9635-3:2006. Agricultural irrigation equipment. Irrigation valvesCheck valves
BS ISO 9635-4:2006. Agricultural irrigation equipment. Irrigation valvesAir valves
BS ISO 9635-5:2006. Agricultural irrigation equipment. Irrigation valvesControl valves
BS ISO 9644:2008. Agricultural irrigation equipment. Pressure losses in irrigation valves. Test method
BS ISO 9650-1:2005. Small craft. Inflatable liferaftsType I
BS ISO 9650-2:2005. Small craft. Inflatable liferaftsType II
BS ISO 9650-3:2005. Small craft. Inflatable liferaftsMaterial
BS ISO 9650-3:2009. Small craft. Inflatable liferaftsMaterials
BS ISO 965-1:1998. ISO general purpose metric screw threads. TolerancesPrinciples and basic data
BS ISO 965-1:2013. ISO general purpose metric screw threads. TolerancesPrinciples and basic data
BS ISO 965-2:1998. ISO general purpose metric screw threads. TolerancesLimits of sizes for general purpose external and internal screw threads. Medium quality
BS ISO 965-3:1998. ISO general purpose metric screw threads. TolerancesDeviations for constructional screw threads
BS ISO 965-4:1998. ISO general purpose metric screw threads. TolerancesLimits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
BS ISO 9654:2004. Pliers and nippers for electronics. Single purpose nippers. Cutting nippers
BS ISO 965-5:1998. ISO general purpose metric screw threads. TolerancesLimits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
BS ISO 9655:2004. Pliers and nippers for electronics. Single-purpose nippers. Pliers for gripping and manipulating
BS ISO 9656:2004. Pliers and nippers for electronics. Test methods
BS ISO 9657:2004. Pliers and nippers for electronics. General technical requirements
BS ISO 9667:1998. Aircraft ground support equipment. Tow bars
BS ISO 9669:1990. Series 1 freight containers. Interface connections for tank containers
BS ISO 9679:2006. Aerospace. Clamps for fluid systems. Test methods
BS ISO 9682-1:2009. Iron ores. Determination of manganese contentFlame atomic absorption spectrometric method
BS ISO 9682-2:2006. Iron ores. Determination of manganese contentPeriodate spectrophotometric method
BS ISO 9683-1:2006. Iron ores. Determination of vanadiumBPHA spectrophotometric method
BS ISO 9683-2:2009. Iron ores. Determination of vanadium contentFlame atomic absorption spectrometric methods
BS ISO 9686:2006. Direct reduced iron. Determination of carbon and/or sulfur. High-frequency combustion method with infrared measurement
BS ISO 9696:2007. Water quality. Measurement of gross alpha activity in non-saline water. Thick source method
BS ISO 9697:2008. Water quality. Measurement of gross beta activity in non-saline water. Thick source method
BS ISO 9698:2010. Water quality. Determination of tritium activity concentration. Liquid scintillation counting method
BS ISO 9707:2008. Information and documentation. Statistics on the production and distribution of books, newspapers, periodicals and electronic publications
BS ISO 9711-1:1990. Freight containers. Information related to containers on board vesselsBay plan system
BS ISO 9711-2:1990. Freight containers. Information related to containers on board vesselsTelex data transmission
BS ISO 9714-1:2012. Orthopaedic drilling instrumentsDrill bits, taps and countersink cutters
BS ISO 9718:1995. Photography. Processed vesicular photographic film. Specifications for stability
BS ISO 9727-1:2007. Cylindrical cork stoppers. Physical testsDetermination of dimensions
BS ISO 9727-2:2007. Cylindrical cork stoppers. Physical testsDetermination of mass and apparent density for agglomerated cork stoppers
BS ISO 9727-3:2007. Cylindrical cork stoppers. Physical testsDetermination of humidity content
BS ISO 9727-4:2007. Cylindrical cork stoppers. Physical testsDetermination of dimensional recovery after compression
BS ISO 9727-5:2007. Cylindrical cork stoppers. Physical testsDetermination of extraction force
BS ISO 9727-6:2007. Cylindrical cork stoppers. Physical testsDetermination of liquid tightness
BS ISO 9727-7:2007. Cylindrical cork stoppers. Physical testsDetermination of dust content
BS ISO 9735-1:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rulesSyntax rules common to all parts
BS ISO 9735-10:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rulesSyntax service directories
BS ISO 9735-2:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rulesSyntax rules specific to batch EDI
BS ISO 9735-3:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rulesSyntax rules specific to interactive EDI
BS ISO 9735-4:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rulesSyntax and service report message for batch EDI (message type - CONTRL)
BS ISO 9735-5:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rulesSecurity rules for batch EDI (authenticity, integrity and non-repudiation of origin)
BS ISO 9735-6:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rulesSecure authentication and acknowledgement message (message type AUTACK)
BS ISO 9735-7:1999. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rulesSecurity rules for batch EDI (confidentiality)
BS ISO 9735-7:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rulesSecurity rules for batch EDI (confidentiality)
BS ISO 9735-8:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rulesAssociated data in EDI
BS ISO 9735-9:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rulesSecurity key and certificate management message (message type KEYMAN)
BS ISO 9736:2000. Eye-ends, in corrosion-resistant steel, threaded, for aircraft control wire rope. Dimensions and loads
BS ISO 9737:2000. Eye-ends, in corrosion resisting steel, swaged on aircraft control wire rope. Dimensions and loads
BS ISO 9738:2000. Turnbarrels, for aircraft control wire rope. Dimensions and loads
BS ISO 974:2000. Plastics. Determination of the brittleness temperature by impact
BS ISO 9747:2000. Double shank ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
BS ISO 9748:2000. Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
BS ISO 9749:2000. Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
BS ISO 975:2013. Brown coals and lignites. Determination of yield of benzene-soluble extract. Semi-automatic method
BS ISO 9757:2000. Fork-ends, in corrosion-resistant steel, threaded, for aircraft control wire rope turnbarrels. Dimensions and loads
BS ISO 9758:2000. Fork-ends, in corrosion-resistant steel, threaded, for rolling bearings, for aircraft control wire rope. Dimensions and loads
BS ISO 9759:2000. Fork ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
BS ISO 9760:2000. Aerospace. Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings. Dimensions and loads
BS ISO 9761:2000. Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles. Dimensions
BS ISO 9762:2000. Aircraft control wire rope assemblies. Dimensions and end-fitting combinations
BS ISO 9766:2012. Drills with indexable inserts. Cylindrical shanks with a parallel flat
BS ISO 9772:1994. Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame
BS ISO 9772:2001. Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame
BS ISO 9772:2012. Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame
BS ISO 98:2001. Textile machinery and accessories. Spinning preparatory and spinning machinery. Main dimensions of coverings for top rollers
BS ISO 9801:1997. Ophthalmic instruments. Trial case lenses
BS ISO 9802:1996. Raw optical glass. Vocabulary
BS ISO 9803-1:2007. Vacuum technology. Mounting dimensions of pipeline fittingsNon knife-edge flange type
BS ISO 9803-2:2007. Vacuum technology. Mounting dimensions of pipeline fittingsKnife-edge flange type
BS ISO 9815:2003. Road vehicles. Passenger-car and trailer combinations. Lateral stability test
BS ISO 9815:2010. Road vehicles. Passenger-car and trailer combinations. Lateral stability test
BS ISO 9816:2006. Passenger cars. Power-off reaction of a vehicle in a turn. Open-loop test method
BS ISO 9825:2005. Hydrometry. Field measurement of discharge in large rivers and rivers in flood
BS ISO 9836:2011. Performance standards in building. Definition and calculation of area and space indicators
BS ISO 9838:1991. Alpine ski-bindings. Test soles for ski-binding tests
BS ISO 9838:2008. Alpine and touring ski-bindings. Test soles for ski-binding tests
BS ISO 9841:2007. Oil of hyssop (Hyssopus officinalis L. ssp. officinalis)
BS ISO 9843:2002. Oil of cedarwood, Chinese type (Cupressus funebris, Endlicher)
BS ISO 9844:2006. Oil of bitter orange (Citrus aurantium L.)
BS ISO 9848:2003. Photography. Source document microfilms. Determination of ISO speed and ISO average gradient
BS ISO 9849:2000. Optics and optical instruments. Geodetic and surveying instruments. Vocabulary
BS ISO 9852:2007. Unplasticized poly(vinyl chloride) (PVC-U) pipes. Dichloromethane resistance at specified temperature (DCMT). Test method
BS ISO 9874:2006. Milk. Determination of total phosphorus content. Method using molecular absorption spectrometry
BS ISO 9895:2008. Paper and board. Compressive strength. Short-span test
BS ISO 9897:1997. Freight containers. Container equipment data exchange (CEDEX). General communication codes
BS ISO 9897-1:1990. Freight containers. Container equipment data exchange (CEDEX). General communication codes
BS ISO 9897-3:1990. Freight containers. Container equipment data exchange (CEDEX). Message types for electronic data interchange
BS ISO 9898:2000. Equipment for crop protection. Test methods for air-assisted sprayers for bush and tree crops
BS ISO 9902:1993. Textile machinery acoustics. Determination of sound pressure levels and sound power levels emitted by textile machines. Engineering and survey methods
BS ISO 9903:1991. Textile machinery and accessories. Wires for metallic card clothing
BS ISO 9903-1:2003. Textile machinery and accessories. Main dimensions for section wires for metallic card clothingFoot without interlocking or interchaining
BS ISO 9903-2:2003. Textile machinery and accessories. Main dimensions for section wires for metallic card clothingFoot with interchaining
BS ISO 9911:2006. Agricultural irrigation equipment. Manually operated small plastics valves
BS ISO 9912-1:2004. Agricultural irrigation equipment. Filters for micro-irrigationTerms, definitions and classification
BS ISO 9912-3:2013. Agricultural irrigation equipment. Filters for microirrigationAutomatic flushing strainer-type filters and disc filters
BS ISO 9921-1:1996. Ergonomic assessment of speech communicationSpeech interference level and communication distances for persons with normal hearing capacity in direct communication (SIL method)
BS ISO 9923:1994. Micrographics. Transparent A6 microfiche. Image arrangements
BS ISO 9924-1:2000. Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetryButadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
BS ISO 9924-2:2000+A1:2012. Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetryAcrylonitrile-butadiene and halobutyl rubbers
BS ISO 9924-3:2009. Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetryHydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction
BS ISO 9926-3:2005. Cranes. Training of driversTower cranes
BS ISO 9947:1991. Textile machinery and accessories. Two-for-one twisters. Vocabulary
BS ISO 9947:2005. Textile machinery and accessories. Two-for-one twisters. Vocabulary
BS ISO 9974-4:2006. Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealingDimensions, design, test methods and requirements for external hex and internal hex port plugs
BS ISO 9980:2012. Belt drives. Grooved pulleys for V-belts (system based on effective width). Geometrical inspection of grooves
BS ISO 9981:1998. Belt drives. Pulleys and V-ribbed belts for the automotive industry. PK profile:dimensions
BS ISO 9982:1998. Belt drives. Pulleys and V-ribbed belts for industrial applications. PH, PJ, PK, PL and PM profiles. Dimensions
BS ISO 9988-1:1998. Plastics. Polyoxymethylene (POM) moulding and extrusion materialsDesignation system and basis for specifications
BS ISO 9988-2:1999. Plastics. Polyoxymethylene (POM) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS ISO 9988-2:2006. Plastics. Polyoxymethylene (POM) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS ISO 999:1996. Information and documentation. Guidelines for the content, organization and presentation of indexes
BS ISO TR 10064-1:1992. Code of inspection practiceInspection of corresponding flanks of gear teeth
BS ISO TR 10064-2:1996. Code of inspection practiceInspection related to radial composite deviations, runout, tooth thickness and backlash
BS ISO TR 10064-3:1996. Code of inspection practiceRecommendations relative to gear blanks, shaft centre distance and parallelism of axes
BS ISO TR 10193:1989. Round general use light gauge metal containers. Nominal filling volumes and nominal diameters
BS ISO TR 10194:1989. Non-round general use light gauge metal containers. Nominal filling volumes and nominal cross-sections
BS ISO TR 10232:1989. General-purpose flat pallets for through transit of goods. Design rating and maximum working load
BS ISO TR 10233:1989. General purpose flat pallets for through transit of goods. Performance requirements
BS ISO TR 10495:1997. Cylindrical gears. Calculation of service life under variable load. Conditions for cylindrical gears in accordance with ISO 6336
BS ISO TR 10828:1997. Worm gears. Geometry of worm profiles
BS ISO TR 10840:1993. Plastics. Burning behaviour. Guidance for development and use of fire tests
BS ISO TR 11255:1994. Applicability of hard cutting materials for machining by chip removal. Information additional to ISO 513 designation
BS ISO TR 11444:1995. Quality of sawn wood used for the construction of pallets
BS ISO TR 11552:1997. Lasers and laser-related equipment. Laser materials-processing machines. Performance specifications and benchmarks for cutting of metals
BS ISO TR 11761:1992. Light-gauge metal containers. Round open-top cans. Classification of can sizes by construction type
BS ISO TR 11762:1992. Light-gauge metal containers. Round open-top cans for liquid products with added gas. Classification of can sizes by construction type
BS ISO TR 11776:1992. Light gauge metal containers. Non-round open-top cans. Cans defined by their nominal capacities
BS ISO TR 11925-1:1999. Reaction to fire tests. Ignitability of building products subjected to direct impingement of flameGuidance on ignitability
BS ISO TR 11974:1997. Measurement of liquid flow in open channels. Electromagnetic current meters
BS ISO TR 11991:1995. Guidance on airway management during laser surgery of upper airway
BS ISO TR 12764:1997. Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
BS ISO TR 12767:1998. Measurement of fluid flow by means of pressure-differential devices. Guidelines to the effect of departure from the specifications and operating conditions given in ISO 5167-1
BS ISO TR 12776:1995. Pallets. Slip sheets
BS ISO TR 13928:1994. Application guide for ISO 10755, ISO 10756, ISO 10757, ISO 10758 and ISO 10759
BS ISO TR 15069:1997. Series 1 freight containers. Handling and securing. Rationale for ISO 3874 annex A
BS ISO TR 15377:1998. Measurement of fluid flow by means of pressure differential devices. Guidelines for specification of nozzles and orifice plates beyond the scope of ISO 5167-1
BS ISO TR 3313:1998. Measurement of fluid flow in closed conduits. Guidelines on the effects of flow pulsations on flow-measurement instruments
BS ISO TR 5168:1998. Measurement of fluid flow. Evaluation of uncertainties
BS ISO TR 5658-1:1997. Reaction to fire tests. Spread of flameGuidance on flame spread
BS ISO TR 5925-2:1997. Fire tests. Smoke control door and shutter assembliesCommentary on test method and test data application
BS ISO TR 7066-1:1997. Assessment of uncertainty in calibration and use of flow measurement devicesLinear calibration relationships
BS ISO TR 7775:1997. Securities. Scheme for message types
BS ISO TR 8363:1997. Measurement of liquid flow in open channels. General guidelines for the selection of method
BS ISO TR 8610:1984. Light gauge metal containers. Round vent-hole cans with soldered ends for milk and milk products. Capacities and related diameters
BS ISO TR 9122-2:1990. Toxicity testing of fire effluentsGuidelines for biological assays to determine the acute inhalation toxicity of fire effluents (basic principles, criteria and methodology
BS ISO TR 9122-3:1993. Toxicity testing of fire effluentsMethods for the analysis of gases and vapours in fire effluents
BS ISO TR 9122-4:1993. Toxicity testing of fire effluentsThe fire model (furnaces and combustion apparatus used in small-scale testing)
BS ISO TR 9122-5:1993. Toxicity testing of fire effluentsPrediction of toxic effects of fire effluents
BS ISO TR 9122-6:1994. Toxicity testing of fire effluentsGuidance for regulators and specifiers on the assessment of toxic hazard in fires in buildings and transport
BS ISO TR 9547:1988. Programming language processors. Test methods. Guidelines for their development and acceptability
BS ISO TR 9705-2:2001. Reaction to fire tests. Full scale room tests for surface productsTechnical background and guidance
BS ISO/ASTM 52915:2013. Standard specification for additive manufacturing file format (AMF) Version 1.1
BS ISO/ASTM 52921:2013. Standard terminology for additive manufacturing. Coordinate systems and test methodologies
BS ISO/CIE 10526:1991. CIE standard colorimetric illuminants
BS ISO/CIE 10527:1991. CIE standard colorimetric observers
BS ISO/HL7 27931:2009. Data exchange standards. Health level seven version 2.5. An application protocol for electronic data exchange in healthcare environments CD-ROM
BS ISO/HL7 27932:2009. Data exchange standards. HL7 clinical document architecture, release 2 CD-ROM
BS ISO/HL7 27951:2009. Health informatics. Common terminology services, release 1
BS ISO/HL7 27951:2009. Health informatics. Common terminology services, release 1 CD-ROM
BS ISO/IEC 10021-1:1990. Information technology. Text communication. Message-oriented text interchange systems (MOTIS). System and service overview
BS ISO/IEC 10021-2:1990. Information technology. Message handling systems (MHS)Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Overall architecture
BS ISO/IEC 10021-2:1996. Information technology. Message handling systems (MHS)Overall architecture
BS ISO/IEC 10021-3:1990. Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Abstract service definition conventions
BS ISO/IEC 10021-4:1990. Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Message transfer system: abstract service definition and procedures
BS ISO/IEC 10021-4:1997. Information technology. Message handling systems (MHS)Message transfer system. Abstract service definition and procedures
BS ISO/IEC 10021-5:1990. Information technology. Text communication. Message-oriented text interchange systems (MOTIS)Message store: abstract service definition
BS ISO/IEC 10021-5:1994. Information technology. Message handling systems (MHS)Message store: abstract service definition
BS ISO/IEC 10021-5:1996. Information technology. Message handling systems (MHS)Message store. Abstract service definition
BS ISO/IEC 10021-6:1990. Information technology. Message handling systems (MHS)Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Protocol specifications
BS ISO/IEC 10021-6:1996. Information technology. Message handling systems (MHS)Protocol specifications
BS ISO/IEC 10021-7:1990. Information technology. Message handling systems (MHS)Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Interpersonal messaging system
BS ISO/IEC 10021-7:1997. Information technology. Message handling systems (MHS)Interpersonal messaging system
BS ISO/IEC 10021-8:1995. Information technology. Message handling systems (MHS)Electronic Data Interchange messaging service
BS ISO/IEC 10021-9:1995. Information technology. Message handling systems (MHS)Electronic Data Interchange messaging system
BS ISO/IEC 10022:1990. Information technology. Open systems interconnection. Physical service definition
BS ISO/IEC 10022:1996. Information technology. Open systems interconnection. Physical service definition
BS ISO/IEC 10025-2:1996. Information technology. Telecommunications and information exchange between systems. Transport conformance testing for connection-mode transport protocol operating over connection-mode network serviceAbstract test suites and PIXIT for ISO/IEC 8073:1988 classes 0, 2 over CONS and 4 over CLNS
BS ISO/IEC 10025-3:1993. Information technology. Telecommunications and information exchange between systems. Transport conformance testing for connection-mode transport protocol operating over connection-mode network serviceTransport test management protocol specification
BS ISO/IEC 10026-1:1992. Information technology. Open systems interconnection. Distributed transaction processingOSI TP model
BS ISO/IEC 10026-1:1998. Information technology. Open systems interconnection. Distributed transaction processingOSI TP model
BS ISO/IEC 10026-2:1992. Information technology. Open systems interconnection. Distributed transaction processingOSI TP service
BS ISO/IEC 10026-2:1996. Information technology. Open systems interconnection. Distributed transaction processingOSI TP service
BS ISO/IEC 10026-2:1998. Information technology. Open systems interconnection. Distributed transaction processingOSI TP service
BS ISO/IEC 10026-3:1992. Information technology. Open systems interconnection. Distributed transaction processingProtocol specification
BS ISO/IEC 10026-3:1996. Information technology. Open systems interconnection. Distributed transaction processingProtocol specification
BS ISO/IEC 10026-3:1996. Information technology. Open systems interconnection. Distributed transaction processingProtocol specification
BS ISO/IEC 10026-3:1998
BS ISO/IEC 10026-3:1998. Information technology. Open systems interconnection. Distributed transaction processingProtocol specification
BS ISO/IEC 10026-4:1995
BS ISO/IEC 10026-4:1995. Information technology. Open systems interconnection. Distributed transaction processingProtocol Implementation Conformance Statement (PICS) proforma
BS ISO/IEC 10026-5:1998
BS ISO/IEC 10026-5:1998. Information technology. Open systems interconnection. Distributed transaction processingApplication context proforma and guidelines when using OSI TP
BS ISO/IEC 10026-6:1995
BS ISO/IEC 10026-6:1995. Information technology. Open systems interconnection. Distributed transaction processingUnstructured data transfer
BS ISO/IEC 10027:1990
BS ISO/IEC 10027:1990. Information technology. Information Resource Dictionary System (IRDS) framework
BS ISO/IEC 10028:1993
BS ISO/IEC 10028:1993. Information technology. Telecommunications and information exchange between systems. Definition of the relaying functions of a network layer intermediate system
BS ISO/IEC 10030:1990
BS ISO/IEC 10030:1990. Information technology. Telecommunications and information exchange between systems. End System Routeing Information Exchange Protocol for use in conjunction with ISO 8878
BS ISO/IEC 10030:1995
BS ISO/IEC 10030:1995. Information technology. Telecommunications and information exchange between systems. End System Routeing Information Exchange protocol for use in conjunction with ISO/IEC 8878
BS ISO/IEC 10031-1:1991
BS ISO/IEC 10031-1:1991. Information technology. Text and office systems. Distributed-office-applications modelGeneral model
BS ISO/IEC 10031-2:1991
BS ISO/IEC 10031-2:1991. Information technology. Text and office systems. Distributed-office-applications modelDistinguished-object-reference and associated procedures
BS ISO/IEC 10032:1995
BS ISO/IEC 10032:1995. Information technology. Reference model of data management
BS ISO/IEC 10035:1991
BS ISO/IEC 10035:1991. Information technology. Open systems interconnection. Connectionless ACSE protocol specification
BS ISO/IEC 10035-1:1995
BS ISO/IEC 10035-1:1995. Information technology. Open systems interconnection. Connectionless protocol for the Association Control Service ElementProtocol specification
BS ISO/IEC 10035-2:1995
BS ISO/IEC 10035-2:1995. Information technology. Open systems interconnection. Connectionless protocol for the Association Control Service ElementProtocol implementation conformance (PICS) proforma
BS ISO/IEC 10036:1993
BS ISO/IEC 10036:1993. Information technology. Font information interchange. Procedure for registration of glyph and glyph collection identifiers
BS ISO/IEC 10036:1996
BS ISO/IEC 10036:1996. Information technology. Font information interchange. Procedures for registration of font-related identifiers
BS ISO/IEC 10038:1993
BS ISO/IEC 10038:1993. Information technology. Telecommunications and information exchange between systems. Local area networks. Media access control (MAC) bridges
BS ISO/IEC 10039:1991
BS ISO/IEC 10039:1991. Information technology. Open Systems Interconnection. Local area networks. Medium Access Control (MAC) service definition
BS ISO/IEC 10040:1992
BS ISO/IEC 10040:1992. Information technology. Open systems interconnection. Systems management overview
BS ISO/IEC 10089:1991
BS ISO/IEC 10089:1991. Information technology. 130 mm rewritable optical disk cartridge for information interchange
BS ISO/IEC 10090:1992
BS ISO/IEC 10090:1992. Information technology. 90 mm optical disk cartridges, rewritable and read only, for data interchange
BS ISO/IEC 10116:1991
BS ISO/IEC 10116:1991. Information technology. Modes of operation for an n-bit block cipher algorithm
BS ISO/IEC 10116:1997
BS ISO/IEC 10116:2006. Information technology. Security techniques. Modes of operation for an n-bit cipher
BS ISO/IEC 10118-1:1994. Information technology.Security techniques.Hash-functionsGeneral
BS ISO/IEC 10118-2:1994. Information technology.Security techniques.Hash-functionsHash-functions using an N-bit block cipher algorithm
BS ISO/IEC 10118-2:2010. Information technology. Security techniques. Hash-functionsHash-functions using an n-bit block cipher
BS ISO/IEC 10118-3:1998. Information technology. Security techniques. Hash-functionsDedicated hash-functions
BS ISO/IEC 10118-3:2004+A1:2006. Information technology. Security techniques. Hash-functionsDedicated hash-functions
BS ISO/IEC 10118-4:1998. Information technology. Security techniques. Hash-functionsHash-functions using modular arithmetic
BS ISO/IEC 10149:1989, EN 30149:1991. Information technology. Data interchange on read-only 120 mm optical data disks (CD-ROM)
BS ISO/IEC 10164-1:1993. Information technology. Open systems interconnection. Systems managementObject management function
BS ISO/IEC 10164-10:1995. Information technology. Open systems interconnection. Systems managementUsage metering function for accounting purposes
BS ISO/IEC 10164-11:1994. Information technology. Open systems interconnection. Systems managementMetric objects and attributes
BS ISO/IEC 10164-12:1994. Information technology. Open systems interconnection. Systems managementTest management function
BS ISO/IEC 10164-13:1995. Information technology. Open systems interconnection. Systems managementSummarization function
BS ISO/IEC 10164-14:1996. Information technology. Open systems interconnection. Systems managementConfidence and diagnostic test categories
BS ISO/IEC 10164-15:1995. Information technology. Open systems interconnection. Systems managementScheduling function
BS ISO/IEC 10164-17:1996. Information technology. Open systems interconnection. Systems managementChange over function
BS ISO/IEC 10164-18:1997. Information technology. Open systems interconnection. Systems managementSoftware management function
BS ISO/IEC 10164-2:1993. Information technology. Open systems interconnection. Systems managementState management function
BS ISO/IEC 10164-3:1993. Information technology. Open systems interconnection. Systems managementAttributes for representing relationships
BS ISO/IEC 10164-4:1992. Information technology. Open systems interconnection. Systems managementAlarm reporting function
BS ISO/IEC 10164-5:1993. Information technology. Open systems interconnection. Systems managementEvent report management function
BS ISO/IEC 10164-6:1993. Information technology. Open systems interconnection. Systems managementLog control function
BS ISO/IEC 10164-7:1992. Information technology. Open systems interconnection. Systems managementSecurity alarm reporting function
BS ISO/IEC 10164-8:1993. Information technology. Open systems interconnection. Systems managementSecurity audit trail function
BS ISO/IEC 10164-9:1995. Information technology. Open systems interconnection. Systems managementObjects and attributes for access control
BS ISO/IEC 10165-1:1993. Information technology. Open systems interconnection. Structure of management informationManagement information model
BS ISO/IEC 10165-2:1992. Information technology. Open systems interconnection. Structure of management informationDefinition of management information
BS ISO/IEC 10165-4:1992. Information technology. Open systems interconnection. Structure of management informationGuidelines for the definition of managed objects
BS ISO/IEC 10165-5:1994. Information technology. Open systems interconnection. Structure of management informationGeneric management information
BS ISO/IEC 10165-6:1994. Information technology. Open systems interconnection. Structure of management informationInformation technology. Open systems Interconnection. Structure of management information:Requirements and guidelines for implementation conformance statement proformas associated with OSI management
BS ISO/IEC 10165-6:1997. Information technology. Open systems interconnection. Structure of management informationRequirements and guidelines for implementation conformance statement proformas associated with OSI management
BS ISO/IEC 10165-7:1996. Information technology. Open systems interconnection. Structure of management informationGeneral relationship model
BS ISO/IEC 10166-1:1991. Information technology. Text and office systems. Document filing and retrieval (DFR)Abstract service definition and procedures
BS ISO/IEC 10166-2:1991. Information technology. Text and office systems. Document filing and retrieval (DFR)Protocol specification
BS ISO/IEC 10168-1:1997. Information technology. Open systems interconnection. Conformance test suite for the session protocolTest suite structure and test purposes
BS ISO/IEC 10168-4:1996. Information technology. Open systems interconnection. Conformance test suite for the session protocolTest management protocol specification
BS ISO/IEC 10169-1:1991. Information technology. Open systems interconnection. Conformance test suite for the ACSE protocolTest suite structure and test purposes
BS ISO/IEC 10170-1:1993. Information technology. Open systems interconnection. Conformance test suite for the FTAM protocolTest suite structure and test purposes
BS ISO/IEC 10173:1991. Information technology. Integrated services digital network (ISDN) primary access connector at reference points S and T
BS ISO/IEC 10173:1998. Information technology. Telecommunications and information exchange between systems. Interface connector and contact assignments for ISDN primary rate access connector located at reference points S and T
BS ISO/IEC 10177:1993. Information technology. Telecommunications and information exchange between systems. Provision of the connection-mode Network internal layer service by intermediate systems using ISO/IEC 8208, the X.25 Packet Layer Protocol
BS ISO/IEC 10181-1:1996. Information technology. Open systems interconnection. Security frameworks for open systemsOverview
BS ISO/IEC 10181-2:1996. Information technology. Open systems interconnection. Security frameworks for open systemsAuthentication framework
BS ISO/IEC 10181-3:1996. Information technology. Open systems interconnection. Security frameworks for open systemsAccess control framework
BS ISO/IEC 10181-4:1997. Information technology. Open systems interconnection. Security frameworks for open systemsNon-repudiation framework
BS ISO/IEC 10181-5:1996. Information technology. Open systems interconnection. Security frameworks for open systemsConfidentiality framework
BS ISO/IEC 10181-6:1996. Information technology. Open systems interconnection. Security frameworks for open systemsIntegrity framework
BS ISO/IEC 10181-7:1996. Information technology. Open systems interconnection. Security frameworks for open systemsSecurity audit and alarms framework
BS ISO/IEC 10206:1991. Information technology. Programming languages. Extended Pascal
BS ISO/IEC 10279:1991. Information technology. Programming languages. Full BASIC
BS ISO/IEC 10367:1991. Information technology. Standardized coded graphic character sets for use in 8-bit codes
BS ISO/IEC 10373-1:1998. Identification cards. Test methodsGeneral characteristics tests
BS ISO/IEC 10373-1:2006. Identification cards. Test methodsGeneral characteristics
BS ISO/IEC 10373-2:1998. Identification cards. Test methodsCards with magnetic stripes
BS ISO/IEC 10373-2:2006. Identification cards. Test methodsCards with magnetic stripes
BS ISO/IEC 10373-3:2001. Identification cards. Test methodsIntegrated circuit(s) cards with contacts and related interface devices
BS ISO/IEC 10373-3:2010. Identification cards. Test methodsIntegrated circuit cards with contacts and related interface devices
BS ISO/IEC 10373-5:1998. Identification cards. Test methodsOptical memory cards
BS ISO/IEC 10373-5:2006. Identification cards. Test methodsOptical memory cards
BS ISO/IEC 10373-6:2001+A7:2010. Identification cards. Test methodsProximity cards
BS ISO/IEC 10373-6:2011+A2:2012. Identification cards. Test methodsProximity cards
BS ISO/IEC 10373-7:2001. Identification cards. Test methodsVicinity cards
BS ISO/IEC 10373-7:2008. Identification cards. Test methodsVicinity cards
BS ISO/IEC 10373-8:2011. Identification cards. Test MethodsUSB-ICC
BS ISO/IEC 10373-9:2011. Identification cards. Test methodsOptical memory cards. Holographic recording method
BS ISO/IEC 10514-1:1996. Information technology. Programming languagesModula-2, base language
BS ISO/IEC 10514-2:1998. Information technology. Programming languagesModula-2, generics in Modula-2
BS ISO/IEC 10514-3:1998. Information technology. Programming languagesModula-2, object-oriented Modula-2
BS ISO/IEC 10536-1:2000. Identification cards. Contactless integrated circuit(s) cardsClose-coupled cards. Physical characteristics
BS ISO/IEC 10538:1991. Information technology. Control functions for text communication
BS ISO/IEC 10561:1991. Information technology. Printing devices. Method for measuring printer throughput
BS ISO/IEC 10588:1993. Information technology. Use of X.25 packet layer protocol in conjunction with X.21/X.21 bis to provide the OSI connection-mode network service
BS ISO/IEC 10589:1992. Information technology. Telecommunications and information exchange between systems. Intermediate system to Intermediate system intra-domain routeing information exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO 8473)
BS ISO/IEC 10641:1993. Information technology. Computer graphics and image processing. Conformance testing of implementations of graphics standards
BS ISO/IEC 10646-1:1993. Information technology. Universal Multiple-Octet Coded Character Set (UCS)Architecture and Basic Multilingual Plane
BS ISO/IEC 10728:1993. Information technology. Information Resource Dictionary System (IRDS) Services Interface
BS ISO/IEC 10729-1:1993. Information technology. Open Systems Interconnection. Conformance test suite for the presentation layerTest suite structure and test purposes for the presentation protocol
BS ISO/IEC 10729-2:1995. Information technology. Open Systems Interconnection. Conformance test suite for the presentation layerTest suite structure and test purposes for the ASN.1 basic encodings
BS ISO/IEC 10731:1994. Information technology. Open systems interconnection. Basic reference model. Conventions for the definition of OSI services
BS ISO/IEC 10732:1993. Information technology. Use of X.25 packet layer protocol to provide the OSI connection-mode network service over the telephone network
BS ISO/IEC 10733:1993. Information technology. Telecommunications and information exchange between systems. Elements of management information related to OSI network layer standards
BS ISO/IEC 10733:1998. Information technology. Elements of management information related to the OSI network layer
BS ISO/IEC 10736:1995. Information technology. Telecommunications and information exchange between systems. Transport layer security protocol
BS ISO/IEC 10737:1994. Information technology. Telecommunications and information exchange between systems. Elements of management information related to OSI transport layer standards
BS ISO/IEC 10737:1998. Information technology. Elements of management information related to the OSI Transport layer
BS ISO/IEC 10739-1:1994. Information technology. Open Systems InterconnectionTest suite structure and test purposes
BS ISO/IEC 10740-1:1993. Information technology. Text and office systems. Referenced Data TransferAbstract service definition
BS ISO/IEC 10740-2:1993. Information technology. Text and office systems. Referenced Data TransferProtocol specification
BS ISO/IEC 10742:1994. Information technology. Telecommunications and information exchange between systems. Elements of management information related to OSI data link layer standards
BS ISO/IEC 10744:1992. Information technology. Hypermedia/Time-based structuring language (HyTime)
BS ISO/IEC 10744:1997. Information technology. Hypermedia/time-based structuring language (HyTime)
BS ISO/IEC 10745:1995. Information technology. Open systems interconnection. Upper layers security model
BS ISO/IEC 10746-1:1998. Information technology. Open distributed processing. Reference modelOverview
BS ISO/IEC 10746-2:1996. Information technology. Open distributed processing. Reference modelFoundations
BS ISO/IEC 10746-2:2009. Information technology. Open distributed processing. Reference model: Foundations
BS ISO/IEC 10746-3:1996. Information technology. Open distributed processing. Reference modelArchitecture
BS ISO/IEC 10746-3:2009. Information technology. Open distributed processing. Reference model: Architecture
BS ISO/IEC 10746-4:1998. Information technology. Open distributed processing. Reference modelArchitectural semantics
BS ISO/IEC 10747:1994. Information technology. Telecommunications and information exchange between systems. Protocol for exchange of inter-domain routeing information among intermediate systems to support forwarding of ISO 8473 PDUs
BS ISO/IEC 10777:1991. Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DDS format
BS ISO/IEC 10857:1994. Information technology. Microprocessor systems. Futurebus+. Logical protocol specification
BS ISO/IEC 10861:1994. Information technology. Microprocessor systems. High-performance synchronous 32-bit bus: MULTIBUS II
BS ISO/IEC 10885:1993. Information technology. 356 mm optical disk cartridge for information interchange. Write once
BS ISO/IEC 10918-2:1995 (set 3 disks). Information technology. Digital compression and coding of continuous-tone still imagesCompliance testing
BS ISO/IEC 10918-2:1995. Information technology. Digital compression and coding of continuous-tone still imagesCompliance testing
BS ISO/IEC 10918-2:1995. Information technology. Digital compression and coding of continuous-tone still imagesCompliance testing
BS ISO/IEC 10918-3:1997. Information technology. Digital compression and coding of continuous-tone still imagesExtensions
BS ISO/IEC 10918-4:1999. Information technology. Digital compression and coding of continuous-tone still imagesRegistration of JPEG profiles, SPIFF profiles, SPIFF tags, SPIFF colour spaces, APPn markers, SPIFF compression types, and Registration Authorities (REGAUT)
BS ISO/IEC 10967-1:1994. Information technology. Language independent arithmeticInteger and floating point arithmetic
BS ISO/IEC 10967-1:2012. Information technology. Language independent arithmeticInteger and floating point arithmetic
BS ISO/IEC 10967-2:2001. Information technology. Language independent arithmeticElementary numerical functions
BS ISO/IEC 10967-3:2006. Information technology. Language independent arithmetricComplex integer and floating point arithmetic and complex elementary numerical functions
BS ISO/IEC 10994:1992. Information technology. Data interchange on 90 mm flexible disk cartridges using modified frequency modulation recording at 31 831 ftprad on 80 tracks on each side. ISO Type 303
BS ISO/IEC 11072:1993. Information Technology. Computer graphics. Computer Graphics Reference Model
BS ISO/IEC 11159:1992. Information technology. Office equipment. Minimum information to be included in specification sheets. Copying machines
BS ISO/IEC 11160-2:2013. Information technology. Office equipment. Minimum information to be included in specification sheets. PrintersClass 3 and Class 4 printers
BS ISO/IEC 11179-3:1994. Information technology. Specification and standardization of data elementsBasic attributes of data elements
BS ISO/IEC 11179-3:2013. Information technology. Metadata registries (MDR)Registry metamodel and basic attributes
BS ISO/IEC 11186-2:1996. Information technology. International standardized profiles FVT3nn. Virtual terminal basic class. Register of attribute assignment type definitionsFVT311. Repertoire Assignment Type for ISO/IEC 10646
BS ISO/IEC 11319:1993. Information technology. 8 mm wide magnetic tape cartridge for information interchange. Helical scan recording
BS ISO/IEC 11321:1992. Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DATA/DAT format
BS ISO/IEC 11404:1996. Information technology. Programming languages, their environments and system software interfaces. Language-independent datatypes
BS ISO/IEC 11411:1995. Information technology. Representation for human communication of state transition of software
BS ISO/IEC 11430:1995. Information technology. Programming languages. Generic package of elementary functions for ADA
BS ISO/IEC 11458:1993. Information technology. Microprocessor systems. VICbus. Inter-crate cable bus
BS ISO/IEC 11557:1992. Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DDS-DC format using 60 m and 90 m length tapes
BS ISO/IEC 11558:1992. Information technology. Data compression for information interchange. Adaptive coding with embedded dictionary. DCLZ Algorithm
BS ISO/IEC 11559:1993. Information technology. Data interchange on 12,7 mm wide 18-track magnetic tape cartridges. Extended format
BS ISO/IEC 11560:1992. Information technology. Information interchange on 130 mm optical disk cartridges using the magneto-optical effect, for write once, read multiple functionality
BS ISO/IEC 11569:1993. Information technology. Telecommunications and information exchange between systems. 26-pole interface connector mateability dimensions and contact number assignments
BS ISO/IEC 11570:1992. Information technology. Telecommunications and information exchange between systems. Open systems interconnection. Transport protocol identification mechanism
BS ISO/IEC 11571:1994. Information technology. Telecommunications and information exchange between systems. Numbering and sub-addressing in private integrated services networks
BS ISO/IEC 11571:1998. Information technology. Telecommunications and information exchange between systems. Private integrated services networks. Addressing
BS ISO/IEC 11572:1994. Information technology. Telecommunications and information exchange between systems. Private Integrated Services Network. Circuit mode bearer services. Inter-exchange signalling procedures and protocol
BS ISO/IEC 11572:1997. Information technology. Telecommunication and information exchange between systems. Private integrated services network. Circuit mode bearer services. Inter-exchange signalling procedures and protocol
BS ISO/IEC 11573:1994. Information technology. Telecommunications and information exchange between systems. Synchronization methods and technical requirements for Private Integrated Services Networks
BS ISO/IEC 11574:1994. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Circuit-mode 64 kbit/s bearer services. Service description, functional capabilities and information flows
BS ISO/IEC 11575:1995. Information technology. Telecommunications and information exchange between systems. Protocol mappings for the OSI data link service
BS ISO/IEC 11576:1994. Information technology. Procedure for the registration of algorithms for the lossless compression of data
BS ISO/IEC 11577:1995. Information technology. Open systems interconnection. Network layer security protocol
BS ISO/IEC 11578:1996. Information technology. Open systems interconnection. Remote procedure call (RPC)
BS ISO/IEC 11579-1:1994. Information technology. Telecommunications and information exchange between systems. Private integrated services networkReference configuration for PISN Exchanges (PINX)
BS ISO/IEC 11582:1995. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Generic functional protocol for the support of supplementary services. Inter-exchange signalling procedures and protocol
BS ISO/IEC 11584:1996. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Circuit-mode multi-rate bearer services. Service description, functional capabilities and information flows
BS ISO/IEC 11586-1:1996. Information technology. Open systems interconnection. Generic upper layers securityOverview, models and notation
BS ISO/IEC 11586-2:1996. Information technology. Open systems interconnection. Generic upper layers securitySecurity exchange service element (SESE) service definition
BS ISO/IEC 11586-3:1996. Information technology. Open systems interconnection. Generic upper layers securitySecurity exchange service element (SESE) protocol specification
BS ISO/IEC 11586-4:1996. Information technology. Open systems interconnection. Generic upper layers securityProtecting transfer syntax specification
BS ISO/IEC 11586-5:1997. Information technology. Open systems interconnection. Generic upper layers securitySecurity exchange service element (SESE) protocol implementation conformance statement (PICS) proforma
BS ISO/IEC 11586-6:1997. Information technology. Open systems interconnection. Generic upper layers securityProtecting transfer syntax protocol implementation conformance statement (PICS) proforma
BS ISO/IEC 11587:1996. Information technology. Open systems interconnection. Application context for systems management with transaction processing
BS ISO/IEC 11588-3:1997. Information technology. Message handling systems (MHS) managementLogging information
BS ISO/IEC 11588-8:1997. Information technology. Message handling systems (MHS) managementMessage transfer agent management
BS ISO/IEC 11693:1994. Identification cards. Optical memory cards. General characteristics
BS ISO/IEC 11693:2000. Identification cards. Optical memory cards. General characteristics
BS ISO/IEC 11693:2005. Identification cards. Optical memory cards. General characteristics
BS ISO/IEC 11693-1:2012. Identification cards. Optical memory cardsGeneral characteristics
BS ISO/IEC 11693-2:2009. Identification cards. Optical memory cardsCo-existence of optical memory with other machine readable technology
BS ISO/IEC 11694-1:1994. Identification cards. Optical memory cards. Linear recording methodPhysical characteristics
BS ISO/IEC 11694-1:2000. Identification cards. Optical memory cards. Linear recording methodPhysical characteristics
BS ISO/IEC 11694-1:2005. Identification cards. Optical memory cards. Linear recording methodPhysical characteristics
BS ISO/IEC 11694-1:2012. Identification Cards. Optical memory cards. Linear recording methodPhysical characteristics
BS ISO/IEC 11694-2:1995. Identification cards. Optical memory cards. Linear recording methodDimensions and location of the accessible optical area
BS ISO/IEC 11694-2:2000. Identification cards. Optical memory cards. Linear recording methodDimensions and location of the accessible optical area
BS ISO/IEC 11694-2:2005. Identification cards. Optical memory cards. Linear recording methodDimensions and location of the accessible optical area
BS ISO/IEC 11694-2:2012. Identification cards. Optical memory cardsDimensions and location of the accessible optical area
BS ISO/IEC 11694-3:1995. Identification cards. Optical memory cards. Linear recording methodOptical properties and characteristics
BS ISO/IEC 11694-3:2001. Identification cards. Optical memory cards. Linear recording methodOptical properties and characteristics
BS ISO/IEC 11694-3:2008. Identification cards. Optical memory cards. Linear recording methodOptical properties and characteristics
BS ISO/IEC 11694-4:1996. Identification cards. Optical memory cards. Linear recording methodLogical data structures
BS ISO/IEC 11694-4:2001. Identification cards. Optical memory cards. Linear recording methodLogical data structures
BS ISO/IEC 11694-4:2008. Identification cards. Optical memory cards. Linear recording methodLogical data structures
BS ISO/IEC 11694-5:2006. Identification cards. Optical memory cards. Linear recording methodData format for information interchange for applications using ISO/IEC 11694-4, annex B
BS ISO/IEC 11694-6:2006. Identification cards. Optical memory cards. Linear recording methodUse of biometrics on an optical memory card
BS ISO/IEC 11695-1:2008. Identification cards. Optical memory cards. Holographic recording methodPhysical characteristics
BS ISO/IEC 11695-2:2008. Identification cards. Optical memory cards. Holographic recording methodDimensions and location of accessible optical area
BS ISO/IEC 11695-3:2008. Identification cards. Optical memory cards. Holographic recording methodOptical properties and characteristics
BS ISO/IEC 11729:1994. Information technology. Programming languages. Generic package of primitive functions for Ada
BS ISO/IEC 11730:1994. Information technology. Programming languages. Form interface management system (FIMS)
BS ISO/IEC 11756:1992. Information technology. Programming languages. MUMPS
BS ISO/IEC 11756:1999. Information technology. Programming languages. M
BS ISO/IEC 11770-1:2010. Information technology. Security techniques. Key managementFramework
BS ISO/IEC 11770-2:2008. Information technology. Security techniques. Key managementMechanisms using symmetric techniques
BS ISO/IEC 11770-3:1999. Information technology. Security techniques. Key managementMechanisms using asymmetric techniques
BS ISO/IEC 11770-3:2008. Information technology. Security techniques. Key managementMechanisms using asymmetric techniques
BS ISO/IEC 11770-4:2006. Information technology. Security techniques. Key managementMechanisms based on weak secrets
BS ISO/IEC 11770-5:2011. Information technology Security techniques. Key managementGroup key management
BS ISO/IEC 11889-1:2009. Information technology. Trusted platform moduleOverview
BS ISO/IEC 11889-2:2009. Information technology. Trusted platform moduleDesign principles
BS ISO/IEC 11889-3:2009. Information technology. Trusted platform moduleStructures
BS ISO/IEC 11889-4:2009. Information technology. Trusted platform moduleCommands
BS ISO/IEC 12042:1993. Information technology. Data compression for information interchange. Binary arithmetic coding algorithm
BS ISO/IEC 12087-1:1995. Information technology. Computer graphics and image processing. Image processing and interchange (IPI). Functional specification.Common architecture for imaging
BS ISO/IEC 12087-2:1994. Information technology. Computer graphics and image processing. Image processing and interchange (IPI). Functional specification.Programmer's imaging kernel system application program interface
BS ISO/IEC 12087-3:1995. Information technology. Computer graphics and image processing. Image processing and interchange (IPI). Functional specification.Image interchange facility (IIF)
BS ISO/IEC 12087-5:1998. Information technology. Computer graphics and image processing. Image processing and interchange (IPI). Functional specification.Basic image interchange format (BIIF)
BS ISO/IEC 12088-4:1995. Information technology. Computer graphics and image processing. Image processing and interchange. Application program interface language bindingsC
BS ISO/IEC 12089:1997. Information technology. Computer graphics and image processing. Encoding for the image interchange facility (IIF)
BS ISO/IEC 12119:1994. Information technology. Software packages. Quality requirements and testing
BS ISO/IEC 12207:1995. Information technology. Software life cycle processes
BS ISO/IEC 12207:1995. Information technology. Software life cycle processes
BS ISO/IEC 12207:2008. Systems and software engineering. Software life cycle processes
BS ISO/IEC 12227:1995. Information technology. Programming languages. SQL/Ada Module Description Language (SAMeDL)
BS ISO/IEC 12246:1993. Information technology. 8 mm wide magnetic tape cartridge dual azimuth format for information interchange. Helical scan recording
BS ISO/IEC 12247:1993. Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DDS format using 60 m and 90 m length tapes
BS ISO/IEC 12248:1993. Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DATA/DAT-DC format using 60 m and 90 m length tapes
BS ISO/IEC 12785-1:2009. Information technology. Learning, education, and training. Content packaging Information model
BS ISO/IEC 12785-2:2011. Information technology. Learning, education, and training. Content packagingXML binding
BS ISO/IEC 12905:2011. Integrated circuit cards. Enhanced terminal accessibility using cardholder preference interface
BS ISO/IEC 13066-1:2011. Information technology. Interoperability with assistive technology (AT)Requirements and recommendations for interoperability
BS ISO/IEC 13210:1994. Information technology. Test methods for measuring conformance to POSIX
BS ISO/IEC 13210:1999. Information technology. Requirements and guidelines for test methods specifications and test method implementation for measuring conformance to POSIX standards
BS ISO/IEC 13211-1:1995. Information technology. Programming languages. PrologGeneral core
BS ISO/IEC 13211-2:2000. Information technology. Programming languages. PrologModules
BS ISO/IEC 13213:1994. Information technology. Microprocessor systems. Control and Status Registers (CSR) Architecture for microcomputer buses
BS ISO/IEC 13235-1:1998. Information technology. Open distributed processing. Trading functionSpecification
BS ISO/IEC 13235-3:1998. Information technology. Open distributed processing. Trading functionProvision of trading function using OSI Directory service
BS ISO/IEC 13236:1998. Information technology. Quality of service:Framework
BS ISO/IEC 13238-3:1998. Information technology. Data managementIRDS export/import facility
BS ISO/IEC 13239:1997. Information technology. Telecommunications and information exchange between systems. High-level data link control (HDLC) procedures
BS ISO/IEC 13241:1997. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Inter-exchange signalling protocol. Route restriction class additional network feature
BS ISO/IEC 13242:1997. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Specification, functional model and information flows. Route restriction class additional network feature
BS ISO/IEC 13246:1997. Information technology. Telecommunications and information exchange between systems. Broadband private integrated services network. Inter-exchange signalling protocol. Signalling ATM adaptation layer
BS ISO/IEC 13247:1997. Information technology. Telecommunications and information exchange between systems. Broadband private integrated services network. Inter-exchange signalling protocol. Basic call/connection control
BS ISO/IEC 13248-1:1998. Information technology. Open systems interconnection. The directoryProtocol implementation conformance statement (PICS) proforma for the directory access protocol
BS ISO/IEC 13248-2:1998. Information technology. Open systems interconnection. The directoryProtocol implementation conformance statement (PICS) proforma for the directory system protocol
BS ISO/IEC 13248-3:1998. Information technology. Open systems interconnection. The directoryProtocol implementation conformance statement (PICS) proforma for the directory operational binding management protocol
BS ISO/IEC 13248-4:1998. Information technology. Open systems interconnection. The directoryProtocol implementation conformance statement (PICS) proforma for the directory information shadowing protocol
BS ISO/IEC 13249-1:2000. Information technology. Database languages. SQL multimedia and application packagesFramework
BS ISO/IEC 13249-1:2002. Information technology. Database languages. SQL multimedia and application packagesFramework
BS ISO/IEC 13249-1:2007. Information technology. Database languages. SQL multimedia and application packagesFramework
BS ISO/IEC 13249-2:2000. Information technology. Database languages. SQL multimedia and application packagesFull-text
BS ISO/IEC 13249-2:2003. Information technology. Database languages. SQL multimedia and application packagesFull-text
BS ISO/IEC 13249-3:1999. Information technology. Database languages. SQL multimedia and application packagesSpatial
BS ISO/IEC 13249-3:2003. Information technology. Database languages. SQL multimedia and application packagesSpatial
BS ISO/IEC 13249-3:2006. Information technology. Database languages. SQL multimedia and application packagesSpatial
BS ISO/IEC 13249-3:2011. Information technology. Database languages. SQL multimedia and application packagesSpatial
BS ISO/IEC 13249-5:2001. Information technology. Database languages. SQL multimedia and application packagesStill image
BS ISO/IEC 13249-5:2003. Information technology. Database languages. SQL multimedia and application packagesStill image
BS ISO/IEC 13249-6:2002. Information technology. Database languages. SQL multimedia and application packagesData mining
BS ISO/IEC 13249-6:2006. Information technology. Database languages. SQL multimedia and application packagesData mining
BS ISO/IEC 13250:2000. Information technology. SGML applications. Topic maps
BS ISO/IEC 13250-2:2006. Information technology. Topic mapsData model
BS ISO/IEC 13250-3:2007. Information technology. Topic mapsXML syntax
BS ISO/IEC 13250-4:2009. Information technology. Topic mapsCanonicalization
BS ISO/IEC 13250-6:2010. Information technology. Topic MapsCompact syntax
BS ISO/IEC 13335-1:2004. Information technology. Security techniques. Management of information and communications technology securityConcepts and models for information and communications technology security management
BS ISO/IEC 13421:1993. Information technology. Data interchange on 12,7 mm, 48-track magnetic tape cartridges. DLT 1 format
BS ISO/IEC 13422:1994. Information technology. Data interchange on 90 mm flexible disk cartridges 10 MByte capacity using sector servo tracking. ISO type 304
BS ISO/IEC 13481:1993. Information technology. Data interchange on 130 mm optical disk cartridges. Capacity: 1 gigabyte per cartridge
BS ISO/IEC 13522-1:1997. Information technology. Coding of multimedia and hypermedia informationMHEG object representation. Base notation (ASN.1)
BS ISO/IEC 13522-3:1997. Information technology. Coding of multimedia and hypermedia informationMHEG script interchange representation
BS ISO/IEC 13522-4:1996. Information technology. Coding of multimedia and hypermedia informationMHEG registration procedure
BS ISO/IEC 13522-5:1997. Information technology. Coding of multimedia and hypermedia informationSupport for base-level interactive applications
BS ISO/IEC 13522-6:1998. Information technology. Coding of multimedia and hypermedia informationSupport for enhanced interactive applications
BS ISO/IEC 13522-7:2001 (CD-ROM). Information technology. Coding of multimedia and hypermedia informationInteroperability and conformance testing for ISO/IEC 13522-5
BS ISO/IEC 13522-7:2001 (COVERS). BSISO/IEC1352-7:2001 Information technology - Coding of multimedia and hypermedia information -Part 7: Interoperability and conformance testing for ISO/IEC13522-5
BS ISO/IEC 13522-7:2001. Information technology. Coding of multimedia and hypermedia informationInteroperability and conformance testing for ISO/IEC 13522-5
BS ISO/IEC 13522-8:2001 (CD-ROM). Information technology - Coding of multimedia and hypermedia informationPart 8: XML notation for ISO?IEC13522-5
BS ISO/IEC 13522-8:2001. Information technology - Coding of multimedia and hypermedia information stallation of liftsPart 8: XML notation for ISO/IEC 13522-5
BS ISO/IEC 13522-8:2001. Information technology. Coding of multimedia and hypermedia informationXML notation for ISO/IEC 13522-5
BS ISO/IEC 13549:1993. Information technology. Data interchange on 130 mm optical disk cartridges. Capacity: 1,3 gigabytes per cartridge
BS ISO/IEC 13568:2002. Information technology. Z formal specification notation. Syntax, type system and semantics
BS ISO/IEC 13575:1995. Information technology. Telecommunications and information exchange between systems. 50-pole interface connector mateability dimensions and contact number assignments
BS ISO/IEC 13642:1996. Information technology. Elements of management information related to the OSI Physical Layer
BS ISO/IEC 13650-2:1997. Information technology. Open systems interconnection. Conformance test suite for the OSI TP protocolTest management protocol specification
BS ISO/IEC 13712-2:1995. Information technology. Remote operationsOSI realizations. Remote operations service element (ROSE) service definition
BS ISO/IEC 13712-3:1995. Information technology. Remote operationsRemote Operations Service Element (ROSE) protocol specification
BS ISO/IEC 13714:1995. Information technology. Document processing and related communication. User interface to telephone-based services. Voice messaging applications
BS ISO/IEC 13751:2001. Information technology. Programming languages, their environments and system software interfaces. Programming language Extended APL
BS ISO/IEC 13813:1998. Information technology. Programming languages. Generic packages of real and complex type declarations and basic operations for Ada (including vector and matrix types)
BS ISO/IEC 13814:1998. Information technology. Programming languages. Generic package of complex elementary functions for Ada
BS ISO/IEC 13816:1997. Information technology. Programming languages, their environments and system software interfaces. Programming language ISLISP
BS ISO/IEC 13817-1:1996. Information technology. Programming languages, their environments and system software interfaces. Vienna Development Method. Specification languageBase language
BS ISO/IEC 13818-11:2004. Information technology. Generic coding of moving pictures and associated audio informationIPMP on MPEG-2 systems
BS ISO/IEC 13818-2:1996. Information technology. Generic coding of moving pictures and associated audio informationVideo
BS ISO/IEC 13818-6:1998. Information technology. Generic coding of moving pictures and associated audio informationExtensions for DSM-CC
BS ISO/IEC 13818-7:1997. Information technology. Generic coding of moving pictures and associated audio informationAdvanced audio coding (AAC)
BS ISO/IEC 13818-7:2003. Information technology. Generic coding of moving pictures and associated audio informationAdvanced audio coding (AAC)
BS ISO/IEC 13818-9:1996. Information technology. Generic coding of moving pictures and associated audio informationExtension for real time interface for systems decoders
BS ISO/IEC 13863:1995. Information technology. Telecommunications and information exchange between systems. Private Integrated Services Network. Specification, functional model and information flows. Path replacement additional network feature
BS ISO/IEC 13863:1998. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Specification, functional model and information flows. Path replacement additional network feature
BS ISO/IEC 13865:1995. Information technology. Telecommunications and information exchange between systems. Private Integrated Services Network. Specification, functional model and information flows. Call transfer supplementary service
BS ISO/IEC 13868:1995. Information technology. Telecommunications and information exchange between systems. Private Integrated Services Network. Inter-exchange signalling protocol. Name identification supplementary services
BS ISO/IEC 13871:1995. Information technology. Telecommunications and information exchange between systems. Private telecommunications networks. Digital channel aggregation
BS ISO/IEC 13874:1995. Information technology. Telecommunications and information exchange between systems. Private Integrated Services Network. Inter-exchange signalling protocol. Path replacement additional network feature
BS ISO/IEC 13874:1999. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Inter-exchange signalling protocol. Path replacement additional network feature
BS ISO/IEC 13886:1996. Information technology. Language independent procedure calling (LIPC)
BS ISO/IEC 13888-1:1997. Information technology. Security techniques. Non-repudiation.General
BS ISO/IEC 13888-1:2004. IT security techniques. Non-repudiationGeneral
BS ISO/IEC 13888-1:2009. Information technology. Security techniques. Non-repudiationGeneral
BS ISO/IEC 13888-2:1998. Information technology. Security techniques. Non-repudiation.Mechanisms using symmetric techniques
BS ISO/IEC 13888-2:2010. Information technology. Security techniques. Non-repudiationMechanisms using symmetric techniques
BS ISO/IEC 13888-3:1997. Information technology. Security techniques. Non-repudiation.Mechanisms using asymmetric techniques
BS ISO/IEC 13888-3:2009. Information technology. Security techniques. Non-repudiationMechanisms using asymmetric techniques
BS ISO/IEC 13923:1996. Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DDS-2 format using 120 m length tape
BS ISO/IEC 13962:1995. Information technology. Data interchange on 12,7 mm, 112-track magnetic tape cartridges. DLT 2 format
BS ISO/IEC 13963:1995. Information technology. Data interchange on 90 mm optical disk cartridges. Capacity: 230 megabytes per cartridge
BS ISO/IEC 14102:2008. Information technology. Guideline for the evaluation and selection of CASE tools
BS ISO/IEC 14143-1:1998. Information technology. Software measurement. Functional size measurementDefinition of concepts
BS ISO/IEC 14143-1:2007. Information technology. Software measurement. Functional size measurementDefinition of concepts
BS ISO/IEC 14143-2:2002. Information technology. Software measurement. Functional size measurementConformity evaluation of software size measurement methods to ISO/IEC 14143-1:1998
BS ISO/IEC 14143-2:2011. Information technology. Software measurement. Functional size measurementConformity evaluation of software size measurement methods to ISO/IEC 14143-1
BS ISO/IEC 14143-6:2006. Information technology. Software measurement. Functional size measurementGuide for use of ISO/IEC 14143 series and related international standards
BS ISO/IEC 14143-6:2012. Information technology. Software measurement. Functional size measurementGuide for use of ISO/IEC 14143 series and related International Standards
BS ISO/IEC 14392:1996. Information technology. Directory services. Application program interface (API) (language independent)
BS ISO/IEC 14393:1996. Information technology. Test methods for measuring conformance to directory services. Application program interface (API) (language independent)
BS ISO/IEC 14394:1996. Information technology. Directory services C language interfaces. Binding for application program interface (API)
BS ISO/IEC 14395:1996. Information technology. Test methods for measuring conformance to directory services C language interfaces. Binding for application program interface (API)
BS ISO/IEC 14443-1:2000. Identification cards. Contactless integrated circuit(s) cards. Proximity cardsPhysical characteristics
BS ISO/IEC 14443-1:2008+A2:2012. Identification cards. Contactless integrated circuit cards. Proximity cardsPhysical characteristics
BS ISO/IEC 14443-2:2001+A1:2005. Identification cards. Contactless integrated circuit(s) cards. Proximity cardsRadio frequency power and signal interface
BS ISO/IEC 14443-2:2010+A2:2012. Identification cards. Contactless integrated circuit cards. Proximity cardsRadio frequency power and signal interface
BS ISO/IEC 14443-3:2001+A3:2006. Identification cards. Contactless integrated circuit(s) cards. Proximity cardsInitialization and anticollision
BS ISO/IEC 14443-3:2011+A2:2012. Identification cards. Contactless integrated circuit cards. Proximity cardsInitialization and anticollision
BS ISO/IEC 14443-4:2001. Identification cards. Contactless integrated circuit(s) cards. Proximity cardsTransmission protocol
BS ISO/IEC 14443-4:2008+A3:2013. Identification cards. Contactless integrated circuit cards. Proximity cardsTransmission protocol
BS ISO/IEC 14474:1998. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Functional requirements for static circuit-mode inter-PINX connections
BS ISO/IEC 14478-1:1998. Information technology. Computer graphics and image processing. Presentation environment for multimedia objects (PREMO)Fundamentals of PREMO
BS ISO/IEC 14478-2:1998 Version 2. Information technology. Computer graphics and image processing. Presentation environment for multimedia objects (PREMO)Foundation component
BS ISO/IEC 14478-2:1998. Information technology. Computer graphics and image processing. Presentation environment for multimedia objects (PREMO)Foundation component
BS ISO/IEC 14478-3:1998. Information technology. Computer graphics and image processing. Presentation environment for multimedia objects (PREMO)Multimedia systems services
BS ISO/IEC 14478-4:1998. Information technology. Computer graphics and image processing. Presentation environment for multimedia objects (PREMO)Modelling, rendering and interaction component
BS ISO/IEC 14495-1:1999 (CD-ROM). BSISO/IEC14495-1:1999 Information technology - Lossless and near-lossless compression of continuous-tone still imagesPart 1: Baseline
BS ISO/IEC 14495-1:1999 (COVERS). BSISO/IEC14495-1:1999 Information technology - Lossless and near-lossless compression of continuous-tone still imagesPart 1: Baseline
BS ISO/IEC 14495-1:1999. Information technology. Lossless and near-lossless compression of continuous-tone still imagesBaseline (CD-ROM)
BS ISO/IEC 14496-10:2003. Information technology. Coding of audio-visual objectsAdvanced video coding
BS ISO/IEC 14496-12:2004. Information technology. Coding of audio-visual objectsISO base media file format
BS ISO/IEC 14496-14:2003. Information technology. Coding of audio-visual objectsMP4 file format
BS ISO/IEC 14496-15:2004. Information technology. Coding of audio-visual objectsAdvanced Video Coding (AVC) file format
BS ISO/IEC 14496-16:2004. Information technology. Coding of audio-visual objectsAnimation framework extension (AFX)
BS ISO/IEC 14496-18:2004. Information technology. Coding of audio-visual objectsFont compression and streaming
BS ISO/IEC 14496-19:2004. Information technology. Coding of audio-visual objectsSynthesized texture stream
BS ISO/IEC 14496-8:2004. Information technology. Coding of audio-visual objectsCarriage of ISO/IEC 14496 Contents over IP networks
BS ISO/IEC 14515-1:2000. Information technology. Portable Operating Systems Interface (POSIX). Test methods for measuring conformance to POSIXSystem interfaces
BS ISO/IEC 14515-2:2003. Information technology. Portable operating system interface (POSIX). Test methods for measuring conformance to POSIXShell and utilities
BS ISO/IEC 14517:1996. Information technology. 130 mm optical disk cartridges for information interchange. Capacity: 2,6 Gbytes per cartridge
BS ISO/IEC 14519:1999. Information technology. POSIX Ada language interfaces. Binding for system application program interface (API). Realtime extensions
BS ISO/IEC 14519:2001. Information technology. POSIX Ada language interfaces. Binding for system application program interface (API)
BS ISO/IEC 14568:1997. Information technology. DXL. Diagram exchange language for tree-structured charts
BS ISO/IEC 14598-1:1999. Information technology. Software production evaluationGeneral overview
BS ISO/IEC 14598-2:2000. Information technology. Software production evaluationPlanning and management
BS ISO/IEC 14598-3:2000. Information technology. Software production evaluationProcess for developers
BS ISO/IEC 14598-4:1999. Information technology. Software production evaluationProcess for acquirers
BS ISO/IEC 14598-5:1998. Information technology. Software production evaluationProcess for evaluators
BS ISO/IEC 14598-6:2001. Information technology. Software production evaluationDocumentation of evaluation modules
BS ISO/IEC 14608-1:1997. Information technology. Open systems interconnection. The directoryDirectory access protocol. Protocol implementation conformance statement (PICS) proforma
BS ISO/IEC 14608-2:1997. Information technology. Open systems interconnection. The directoryDirectory system protocol. Protocol implementation conformance statement (PICS) proforma
BS ISO/IEC 14651:2001. Information technology. International string ordering and comparision. Method for comparing character strings and description of the common template tailorable ordering
BS ISO/IEC 14651:2001. Information technology. International string ordering and comparison. Method for comparing character strings and description of the common template tailorable ordering
BS ISO/IEC 14651:2007+A1:2009. Information technology. International string ordering and comparison. Method for comparing character strings and description of the common template tailorable ordering
BS ISO/IEC 14651:2011. Information technology. International string ordering and comparison. Method for comparing character strings and description of the common template tailorable ordering
BS ISO/IEC 14662:1997. Information technology. Open-EDI reference model
BS ISO/IEC 14662:2004. Information technology. Open-EDI reference model
BS ISO/IEC 14662:2010. Information technology. Open-edi reference model
BS ISO/IEC 14699:1997. Information technology. Open systems interconnection. Transport fast byte protocol
BS ISO/IEC 14700:1997. Information technology. Open systems interconnection. Network fast byte protocol
BS ISO/IEC 14709-1:1997. Information technology. Configuration of customer premises cabling (CPC) for applicationsISDN basic access
BS ISO/IEC 14752:2000. Information technology. Open Distributed Processing. Protocol support for computational interactions
BS ISO/IEC 14753:1999. Information technology. Open distributed processing. Interface references and binding
BS ISO/IEC 14755:1997. Information technology. Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
BS ISO/IEC 14756:1999 (CD-ROM). Information Technology. Measurement and rating of performance of computer-based software systems
BS ISO/IEC 14756:1999. Information Technology. Measurement and rating of performance of computer-based software systems
BS ISO/IEC 14756:1999. Information technology. Measurement and rating of performance of computer-based software systems (CD-ROM)
BS ISO/IEC 14763-3:2006+A1:2009. Information technology. Implementation and operation of customer premises cablingTesting of optical fibre cabling
BS ISO/IEC 14764:1999. Information technology. Software maintenance
BS ISO/IEC 14764:2006. Software engineering. Software life cycle processes. Maintenance
BS ISO/IEC 14765:1997. Information technology. Framework for protocol identification and encapsulation
BS ISO/IEC 14766:1997. Information technology. Telecommunications and information exchange between systems. Use of OSI applications over the internet transmission control protocol (TCP)
BS ISO/IEC 14769:2001. Information technology. Open distributed processing. Type repository function
BS ISO/IEC 14771:1999. Information technology. Open distributed. Processing. Naming framework
BS ISO/IEC 14772-1:1997. Information technology. Computer graphics and image processing. The Virtual Reality Modelling LanguageFunctional specification and UTF-8 encoding
BS ISO/IEC 14772-2:2004 (CD-ROM). Information technology. Computer graphics and image processing. The Virt ual Reality Modelling LanguageExternal Authoring Interface (EAI)
BS ISO/IEC 14772-2:2004. Information technology. Computer graphics and image processing. The Virtual Reality Modelling LanguageExternal Authoring Interface (EAI)
BS ISO/IEC 14834:1996. Information technology. Distributed transaction processing. The XA specification
BS ISO/IEC 14882:1998. Programming languages. C++
BS ISO/IEC 14882:2003. Programming languages. C++
BS ISO/IEC 14882:2011. Information technology. Programming Languages. C++
BS ISO/IEC 14888-1:1998. Information technology. Security techniques. Digital signatures with appendixGeneral
BS ISO/IEC 14888-1:2008. Information technology. Security techniques. Digital signatures with appendixGeneral
BS ISO/IEC 14888-2:1999. Information technology. Security techniques. Digital signatures with appendixIdentity-based mechanisms
BS ISO/IEC 14888-2:2008. Information technology. Security techniques. Digital signatures with appendixInteger factorization based mechanisms
BS ISO/IEC 14888-3:1998. Information technology. Security techniques. Digital signatures with appendixCertificate-based mechanisms
BS ISO/IEC 14888-3:2006+A2:2012. Information technology. Security techniques. Digital signatures with appendixDiscrete logarithm based mechanisms
BS ISO/IEC 14957:2010. Information technology. Representation of data element values. Notation of the format
BS ISO/IEC 14977:1996. Information technology. Syntactic Metalanguage. Extended BNF
BS ISO/IEC 15026:1998. Information technology. System and software integrity levels
BS ISO/IEC 15026-2:2011. Systems and software engineering. Systems and software assuranceAssurance case
BS ISO/IEC 15026-3:2011. Systems and software engineering. Systems and software assuranceSystem integrity levels
BS ISO/IEC 15026-4:2012. Systems and software engineering. Systems and software assuranceAssurance in the life cycle
BS ISO/IEC 15049:1997. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Specification, functional model and information flows. Advice of charge supplementary services
BS ISO/IEC 15050:1997. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Inter-exchange signalling protocol. Advice of charge supplementary services
BS ISO/IEC 15051:1997. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Specification, functional model and information flows. Recall supplementary service
BS ISO/IEC 15052:1997. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Inter-exchange signalling protocol. Recall supplementary service
BS ISO/IEC 15053:1997. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Specification, functional model and information flows. Call interception additional network feature
BS ISO/IEC 15054:1997. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Inter-exchange signalling protocol. Call interception additional network feature
BS ISO/IEC 15055:1997. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Specification, functional model and information flows. Transit counter additional network feature
BS ISO/IEC 15056:1997. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Inter-exchange signalling protocol. Transit counter additional network feature
BS ISO/IEC 15068-2:1999. Information technology. Portable operating system interface (POSIX) system administrationSoftware administration
BS ISO/IEC 15145:1997. Information technology. Programming languages. FORTH
BS ISO/IEC 15200:1996. Information technology. Adaptive lossless data compression algorithm (ALDC)
BS ISO/IEC 15288:2002. Systems engineering. System life cycle processes
BS ISO/IEC 15289:2006. Systems and software engineering. Content of systems and software life cycle process information products (documentation)
BS ISO/IEC 15292:2001. Information technology. Security techniques. Protection profile registration procedures
BS ISO/IEC 1539-1:1997. Information technology. Programming languages. FORTRANBase language
BS ISO/IEC 1539-1:2004. Information technology. Programming languages. FortranBase language
BS ISO/IEC 1539-1:2010. Information technology. Programming languages. Fortran Base language
BS ISO/IEC 1539-2:2000. Information technology. Programming languages. FORTRANVarying length character strings
BS ISO/IEC 1539-3:1999. Information technology. Programming languages. FORTRANConditional compilation
BS ISO/IEC 15408-1:1999. Information technology. Security techniques. Evaluation criteria for IT securityIntroduction and general model
BS ISO/IEC 15408-1:2005. Information technology. Security techniques. Evaluation criteria for IT securityIntroduction and general model
BS ISO/IEC 15408-1:2009. Information technology. Security techniques. Evaluation criteria for IT SecurityIntroduction and general model
BS ISO/IEC 15408-2:1999. Information technology. Security techniques. Evaluation criteria for IT securitySecurity functional requirements
BS ISO/IEC 15408-2:2005. Information technology. Security techniques. Evaluation criteria for IT securitySecurity functional requirements
BS ISO/IEC 15408-2:2008. Information technology. Security techniques. Evaluation criteria for IT securitySecurity functional components
BS ISO/IEC 15408-3:1999. Information technology. Security techniques. Evaluation criteria for IT securitySecurity assurance requirements
BS ISO/IEC 15408-3:2005. Information technology. Security techniques. Evaluation criteria for IT securitySecurity assurance requirements
BS ISO/IEC 15408-3:2008. Information technolgy. Security techniques. Evaluation criteria for IT securitySecurity assurance components
BS ISO/IEC 15414:2002. Information technology. Open distributed processing. Reference model. Enterprise language
BS ISO/IEC 15414:2006. Information technology. Open distributed processing. Reference model. Enterprise language
BS ISO/IEC 15415:2011. Information technology. Automatic identification and data capture techniques. Bar code symbol print quality test specification. Two-dimensional symbols
BS ISO/IEC 15417:2000. Information technology. Automatic identification and data capture techniques. Bar code symbology specification. Code 128
BS ISO/IEC 15417:2007. Information technology. Automatic identification and data capture techniques. Code 128 bar code symbology specification
BS ISO/IEC 15418:1999. Information technology. EAN/UCC application identifiers and fact data identifiers and maintenance
BS ISO/IEC 15418:2009. Information technology. Automatic identification and data capture techniques. GS1 Application Identifiers and ASC MH10 Data Identifiers and maintenance
BS ISO/IEC 15420:2000. Information technology. Automatic identification and data capture techniques. Bar code symbology specification. EAN/UPC
BS ISO/IEC 15420:2009. Information technology. Automatic identification and data capture techniques. EAN/UPC bar code symbology specification
BS ISO/IEC 15421:2010. Information technology. Automatic identification and data capture techniques. Bar code master test specifications
BS ISO/IEC 15423:2004. Information technology. Automatic identification and data capture techniques. Bar code scanner and decoder performance testing
BS ISO/IEC 15424:2000. Information technology. Automatic identification and data capture techniques. Data Carrier Identifiers (including Symbology Identifiers)
BS ISO/IEC 15424:2008. Information technology. Automatic identification and data capture techniques. Data Carrier Identifiers (including Symbology Identifiers)
BS ISO/IEC 15426-1:2000. Information technology. Automatic identification and data capture techniques. Bar code verifier conformance specificationsLinear symbols
BS ISO/IEC 15426-1:2006. Information technology. Automatic identification and data capture techniques. Bar code verifier conformance specificationLinear symbols
BS ISO/IEC 15434:1999. Information technology. Transfer syntax for high capacity ADC media
BS ISO/IEC 15434:2005. Information technology. Syntax for high-capacity automatic data capture (ADC) media
BS ISO/IEC 15434:2006. Information technology. Automatic identification and data capture techniques. Syntax for high-capacity ADC media
BS ISO/IEC 15437:2001. Information technology. Enhancements to LOTOS (E-LOTOS)
BS ISO/IEC 15444-12:2004. Information technology. JPEG 2000 image coding systemISO base media file format
BS ISO/IEC 15444-2:2004. Information technology. JPEG 2000 image coding systemExtensions
BS ISO/IEC 15444-6:2003. BSISO/IEC15444-6:2003 Information technology - JPEG 2000 image coding systemPart 6: Compound image file format
BS ISO/IEC 15444-6:2003. Information technology. JPEG 2000 image coding systemCompound image file format
BS ISO/IEC 15457-1:2001. Identification cards. Thin flexible cardsPhysical characteristics
BS ISO/IEC 15457-1:2008. Identification cards. Thin flexible cardsPhysical characteristics
BS ISO/IEC 15457-2:2001. Identification cards. Thin flexible cardsMagnetic recording techniques
BS ISO/IEC 15457-2:2007. Identification cards. Thin flexible cardsMagnetic recording technique
BS ISO/IEC 15457-3:2008. Identification cards. Thin flexible cardsTest methods
BS ISO/IEC 15459-1:2006. Information technology. Unique identifiersUnique identifiers for transport units
BS ISO/IEC 15459-2:1999. Information technology. Unique identification of transport unitsRegistration procedures
BS ISO/IEC 15459-2:2006. Information technology. Unique identifiersRegistration procedures
BS ISO/IEC 15459-3:2006. Information technology. Unique identifiersCommon rules for unique identifiers
BS ISO/IEC 15459-4:2006. Information technology. Unique identifiersUnique item identification for supply chain management
BS ISO/IEC 15459-5:2007. Information technology. Unique identifiersUnique identifier for returnable transport items (RTIs)
BS ISO/IEC 15459-6:2007. Information technology. Unique identifiersUnique identifier for product groupings
BS ISO/IEC 15459-8:2009. Information technology. Unique identifiersGrouping of transport units
BS ISO/IEC 15474-1:2002. Information technology. CDIF frameworkOverview
BS ISO/IEC 15474-2:2002. Information technology. CDIF frameworkModelling and extensibility
BS ISO/IEC 15475-1:2002. Information technology. CDIF transfer formatGeneral rules for syntaxes and encodings
BS ISO/IEC 15475-2:2002. Information technology. CDIF transfer formatSyntax SYNTAX.1
BS ISO/IEC 15475-3:2002. Information technology. CDIF transfer formatEncoding ENCODING.1
BS ISO/IEC 15476-1:2002. Information technology. CDIF semantic metamodelFoundation
BS ISO/IEC 15476-2:2002. Information technology. CDIF semantic metamodelCommon
BS ISO/IEC 15476-3:2006. Information technology. CDIF semantic metamodelData definitions
BS ISO/IEC 15476-4:2005. Information technology. CDIF semanic metamodelData models
BS ISO/IEC 15476-6:2006. Information technology. CDIF semantic metamodelState/event models
BS ISO/IEC 15504-1:1998. Information technology. Software process assessmentConcepts and introductory guide
BS ISO/IEC 15504-1:2004. Information technology. Process assessmentConcepts and vocabulary
BS ISO/IEC 15504-2:2003. Software engineering. Process assessmentPerforming an assessment
BS ISO/IEC 15504-3:2004. Information technology. Process assessmentGuidance on performing an assessment
BS ISO/IEC 15504-4:2004. Information technology. Process assessmentGuidance on use for process improvement and process capability determination
BS ISO/IEC 15504-5:2006. Information technology. Process assessmentAn exemplar process assessment model
BS ISO/IEC 15504-5:2012. Information technology. Process assessmentAn exemplar software life cycle process assessment model
BS ISO/IEC 15504-6:2013. Information technology. Process assessmentAn exemplar system life cycle process assessment model
BS ISO/IEC 15505:1997. Information technology. Private integrated services network (PISN). Specification, functional model and information flows. Message waiting indication supplementary service (MWISD)
BS ISO/IEC 15506:1997. Information technology. Private integrated services network (PISN). Inter-exchange signalling protocol. Message waiting indication supplementary service (QSIG-MWI)
BS ISO/IEC 15507:1997. Information technology. Telecommunications and information exchange between systems. Private Integrated Services Network. Inter-exchange signalling protocol. PINX clock synchronization
BS ISO/IEC 15693-1:2000. Identification cards. Contactless integrated circuit(s) cards. Vicinity cardsPhysical characteristics
BS ISO/IEC 15693-1:2010. Identification cards. Contactless integrated circuit cards. Vicinity cardsPhysical characteristics
BS ISO/IEC 15693-2:2000. Identification cards. Contactless integrated circuit(s) cards. Vicinity cardsAir interface and initialization
BS ISO/IEC 15693-2:2006. Identification cards. Contactless integrated circuit cards. Vicinity cardsAir interface and initialization
BS ISO/IEC 15693-3:2001. Identification cards. Contactless integrated circuit(s) cards. Vicinity cardsAnticollision and transmission protocol
BS ISO/IEC 15693-3:2009. Identification cards. Contactless integrated circuit(s) cards. Vicinity cardsAnticollision and transmission protocol
BS ISO/IEC 15771:1998. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Specification, functional model and information flows. Common information additional network feature
BS ISO/IEC 15772:1998. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Inter-exchange signalling protocol. Common information additional network feature
BS ISO/IEC 15773:1998. Information technology. Telecommunications and information exchange between systems. Broadband private integrated services network. Inter-exchange signalling protocol. Transit counter additional network feature
BS ISO/IEC 15802-1:1995. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks - common specifications.Medium Access Control (MAC) service definition
BS ISO/IEC 15802-2:1995. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks - common specifications.LAN/MAN management
BS ISO/IEC 15802-4:1994. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks - common specifications.System load protocol
BS ISO/IEC 15802-5:1998. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks - common specifications.Remote media access control (MAC) bridging
BS ISO/IEC 15852:1999. Information technology. Programming languages. M Windowing API
BS ISO/IEC 15897:1999. Information technology. Procedures for registration of cultural elements
BS ISO/IEC 15899:1998. Information technology. Telecommunications and information exchange between systems. Broadband private integrated services network. Service description. Broadband connection oriented bearer services
BS ISO/IEC 15909-1:2004+A1:2010. Systems and software engineering. High-level Petri netsConcepts, definitions and graphical notation
BS ISO/IEC 15909-2:2009. Software and system engineering. High-level Petri netsTransfer format
BS ISO/IEC 15909-2:2011. Systems and software engineering. High-level Petri netsTransfer format
BS ISO/IEC 15910:1999. Information technology. Software user documentation process
BS ISO/IEC 15938-6:2003. Information technology. Multimedia content description interfaceReference software
BS ISO/IEC 15938-7:2003 (CD-ROM). BSISO/IEC15938-7:2003 Information technology - Multimedia content description interfacePart 7:Conformance testing
BS ISO/IEC 15938-7:2003 (COVERS). Information technology. Multimedia content description interfaceConformance testing
BS ISO/IEC 15938-7:2003. Information technology. Multimedia content description interfaceConformance testing
BS ISO/IEC 15939:2002. Software engineering. Software measurement process
BS ISO/IEC 15939:2007. Systems and software engineering. Measurement process
BS ISO/IEC 15940:2013. Systems and software engineering. Software Engineering Environment Services
BS ISO/IEC 15944-1:2002. Information technology. Business agreement semantic descriptive techniquesOperational aspects of Open-EDI for implementation
BS ISO/IEC 15944-1:2011. Information technology. Business operational viewOperational aspects of Open-edi for implementation
BS ISO/IEC 15944-10:2013. Information technology. Business Operational ViewIT-enabled coded domains as semantic components in business transactions
BS ISO/IEC 15944-2:2006. Information technology. Business operational viewRegistration of scenarios and their components as business objects
BS ISO/IEC 15944-4:2007. Information technology. Business operational viewBusiness transaction scenarios. Accounting and economic ontology
BS ISO/IEC 15944-5:2008. Information technology. Business operational viewIdentification and referencing of requirements of jurisdictional domains as sources of external constraints
BS ISO/IEC 15944-7:2009. Information technology. Business operational vieweBusiness vocabulary
BS ISO/IEC 15944-8:2012. Information technology. Business Operational View Identification of privacy protection requirements as external constraints on business transactions
BS ISO/IEC 15945:2002. Information technology. Security techniques. Specification of TTP services to support the application of digital signatures
BS ISO/IEC 15946-1:2002. Information technology. Security techniques. Cryptographic techniques based on elliptic curvesGeneral
BS ISO/IEC 15946-1:2008. Information technology. Security techniques. Cryptographic techniques based on elliptic curvesGeneral
BS ISO/IEC 15946-2:2002. Information technology. Security techniques. Cryptographic techniques based on elliptic curvesDigital signatures
BS ISO/IEC 15946-3:2002. Information technology. Security techniques. Cryptographic techniques based on elliptic curvesKey establishment
BS ISO/IEC 15946-4:2004. Information technology. Security techniques. Cryptographic techniques based on elliptic curvesDigital signatures giving message recovery
BS ISO/IEC 15946-5:2009. Information technology. Security techniques. Cryptographic techniques based on elliptic curvesElliptic curve generation
BS ISO/IEC 15948:2004 (CD-ROM). Information technology. Computer Graphics and image processing. Portable Network Graphics (PNG):Functional Specification
BS ISO/IEC 15948:2004 (COVERS). Information technology. Computer Graphics and image processing. Portable Network Graphics (PNG): Functional Specification
BS ISO/IEC 15961:2004. Information technology. Radio frequency identification (RFID) for item management. Data protocol. Application interface
BS ISO/IEC 15961-1:2013. Information technology. Radio frequency identification (RFID) for item management: Data protocolApplication interface
BS ISO/IEC 15962:2004. Information technology. Radio frequency identification (RFID) for item management. Data protocol. Data encoding rules and logical memory functions
BS ISO/IEC 15962:2013. Information technology. Radio frequency identification (RFID) for item management. Data protocol: data encoding rules and logical memory functions
BS ISO/IEC 15963:2004. Information technology. Radio-frequency identification for item management. Unique identification for RF tags
BS ISO/IEC 15963:2009. Information technology. Radio frequency identification for item management. Unique identification for RF tags
BS ISO/IEC 15991:1998. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Specification, functional model and information flows. Call priority interruption and call priority interruption protection supplementary services
BS ISO/IEC 15992:1998. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Inter-exchange signalling protocol. Call priority interruption and call priority interruption protection supplementary services
BS ISO/IEC 16022:2000. Information technology. International symbology specification. Data matrix
BS ISO/IEC 16022:2006. Information technology. Automatic identification and data capture techniques. Data Matrix bar code symbology specification
BS ISO/IEC 16023:2000. Information technology. International symbology specification. Maxicode
BS ISO/IEC 16085:2004. Information technology. Software life cycle processes. Risk management
BS ISO/IEC 16085:2006. Systems and software engineering. Life cycle processes. Risk management
BS ISO/IEC 16262:2002. Information technology. ECMAScript language specification
BS ISO/IEC 16262:2011. Information technology. Programming languages, their environments and system software interfaces. ECMAScript language specification
BS ISO/IEC 16326:1999. Software engineering. Guide for the application of ISO/IEC 12207 to project management
BS ISO/IEC 16326:2009. Systems and software engineering. Life cycle processes. Project management
BS ISO/IEC 16388:1999. Information technology. Automatic identification and data capture techniques. Bar code symbology specifications. Code 39
BS ISO/IEC 16388:2007. Information technology. Automatic identification and data capture techniques. Code 39 bar code symbology specification
BS ISO/IEC 16390:1999. Information technology. Automatic identification and data capture techniques. Bar code symbology specifications. Interleaved 2 of 5
BS ISO/IEC 16390:2007. Information technology. Automatic identification and data capture techniques. Interleaved 2 of 5 bar code symbology specification
BS ISO/IEC 16680:2012. Information technology. The Open Group Service Integration Maturity Model (OSIMM)
BS ISO/IEC 17799:2000, BS 7799-1:2000. Information technology. Code of practice for information security management
BS ISO/IEC 17799:2005 (French version), BS 7799-1:2005. Technologies de l'information. Techniques de securite. Code de bonne practique pour la gestion de la securite de l'information (French translation of BS ISO/IEC 17799:2005)
BS ISO/IEC 17826:2012. Information technology. Cloud Data Management Interface (CDMI)
BS ISO/IEC 17963:2013. Web Services for Management (WS-Management) Specification
BS ISO/IEC 17998:2012. Information technology. SOA Governance Framework
BS ISO/IEC 18000-1:2004. Information technology. Radio frequency identification for item managementReference architecture and definition of parameters to be standardized
BS ISO/IEC 18000-1:2008. Information technology. Radio frequency identification for item managementReference architecture and definition of parameters to be standardized
BS ISO/IEC 18000-2:2004. Information technology. Radio frequency idenficiation for item managementParameters for air interface communications below 135 KHz
BS ISO/IEC 18000-2:2009. Information technology. Radio frequency identification for item managementParameters for air interface communications below 135 kHz
BS ISO/IEC 18000-3:2004. Information technology. Radio frequency identification for item managementParameters for air interface communications at 13.56 MHz
BS ISO/IEC 18000-3:2010. Information technology. Radio frequency identification for item managementParameters for air interface communications at 13,56 MHz
BS ISO/IEC 18000-4:2004. Information technology. Radio-frequency identification for item managementParameters for air interface communications at 2,45 GHz
BS ISO/IEC 18000-4:2008. Information technology. Radio frequency identification for item managementParameters for air interface communications at 2,45 GHz
BS ISO/IEC 18000-6:2004. Information technology. Radio frequency identification for item managementParameters for air interface communications at 860 MHz to 960 MHz
BS ISO/IEC 18000-6:2010. Information technology. Radio frequency identification for item managementParameters for air interface communications at 860 MHz to 960 MHz
BS ISO/IEC 18000-6:2013. Information technology. Radio frequency identification for item managementParameters for air interface communications at 860 MHz to 960 MHz General
BS ISO/IEC 18000-61:2012. Information technology. Radio frequency identification for item managementParameters for air interface communications at 860 MHz to 960 MHz Type A
BS ISO/IEC 18000-62:2012. Information technology. Radio frequency identification for item managementParameters for air interface communications at 860 MHz to 960 MHz Type B
BS ISO/IEC 18000-63:2013. Information technology. Radio frequency identification for item managementParameters for air interface communications at 860 MHz to 960 MHz Type C
BS ISO/IEC 18000-64:2012. Information technology. Radio frequency identification for item managementParameters for air interface communications at 860 MHz to 960 MHz Type D
BS ISO/IEC 18000-7:2004. Information technology. Radio frequency identification for item managementParameters for active air interface communications at 433 MHz
BS ISO/IEC 18000-7:2008. Information technology. Radio frequency identification for item managementParameters for active air interface communications at 433 MHz
BS ISO/IEC 18004:2000. Information technology. Automatic identification and data capture techniques. Bar code symbology. QR Code
BS ISO/IEC 18004:2006. Information technology. Automatic identification and data capture techniques. QR Code 2005 bar code symbology specification
BS ISO/IEC 18009:1999. Information technology. Programming languages. Ada: conformity assessment of a language processor
BS ISO/IEC 18013-1:2005. Information technology. Personal identification. ISO-compliant driving licencePhysical characteristics and basic data set
BS ISO/IEC 18013-2:2008. Information technology. Personal identification. ISO-compliant driving licenceMachine-readable technologies
BS ISO/IEC 18013-3:2009+A1:2012. Information technology. Personal identificationAccess control, authentification and integrity validation
BS ISO/IEC 18013-4:2011. Information technology. Personal identification. ISO-compliant driving licenceTest methods
BS ISO/IEC 18014-1:2002. Information technology. Security techniques. Time-stamping servicesFramework
BS ISO/IEC 18014-1:2008. Information technology. Security techniques. Time- stamping servicesFramework
BS ISO/IEC 18014-2:2002. Information technology. Security techniques. Time-stamping servicesMechanisms producing independent tokens
BS ISO/IEC 18014-2:2009. Information technology. Security techniques. Time-stamping servicesMechanisms producing independent tokens
BS ISO/IEC 18014-3:2004. Information technology. Security techniques. Time-stamping servicesMechanisms producing linked tokens
BS ISO/IEC 18014-3:2009. Information technology. Security techniques. Time-stamping servicesMechanisms producing linked tokens
BS ISO/IEC 18019:2004. Software and system engineering. Guidelines for the design and preparation of user documentation for application software
BS ISO/IEC 18028-1:2006. Information technology. Security techniques. IT network securityNetwork security management
BS ISO/IEC 18028-2:2006. Information technology. Security techniques. IT network securityNetwork security architecture
BS ISO/IEC 18028-3:2005. Information technology. Security techniques. IT network securitySecuring communications between networks using security gateways
BS ISO/IEC 18028-4:2005. Information technology. Security techniques. IT network securitySecuring remote access
BS ISO/IEC 18028-5:2006. Information technology. Security techniques. IT network security Securing communications across networks using virtual private networks
BS ISO/IEC 18031:2005. Information technology. Security techniques. Random bit generation
BS ISO/IEC 18031:2011. Information technology. Security techniques. Random bit generation
BS ISO/IEC 18032:2005. Information technology. Security techniques. Prime number generation
BS ISO/IEC 18033-1:2005+A1:2011. Information technology. Security techniques. Encryption algorithmsGeneral
BS ISO/IEC 18033-2:2006. Information technology. Security techniques. Encryption algorithmsAsymmetric ciphers
BS ISO/IEC 18033-3:2005. Information technology. Security techniques. Encryption algorithmsBlock ciphers
BS ISO/IEC 18033-3:2010. Information technology. Security techniques. Encryption algorithmsBlock ciphers
BS ISO/IEC 18033-4:2005+A1:2009. Information technology. Security techniques. Encryption algorithmsStream ciphers
BS ISO/IEC 18033-4:2011. Information technology. Security techniques. Encryption algorithmsStream ciphers
BS ISO/IEC 18043:2006. Information technology. Security techniques. Selection, deployment and operations of intrusion detection systems
BS ISO/IEC 18045:2005. Information technology. Security techniques. Methodology for IT security evaluation
BS ISO/IEC 18045:2008. Information technology. Security techniques. Methodology for IT security evaluation
BS ISO/IEC 18046:2006. Information technology. Automatic identification and data capture techniques. Radio frequency identification device performance test methods
BS ISO/IEC 18046-1:2011. Information technology. Radio frequency identification device performance test methodsTest methods for system performance
BS ISO/IEC 18046-2:2011. Information technology. Radio frequency identification device performance test methodsTest methods for interrogator performance
BS ISO/IEC 18046-3:2007. Information technology. Radio frequency identification device performance test methodsTest methods for tag performance
BS ISO/IEC 18046-3:2012. Information technology. Radio frequency identification device performance test methodsTest methods for tag performance
BS ISO/IEC 18047-2:2012. Information technology. Radio frequency identification device conformance test methodsTest methods for air interface communications below 135 kHz
BS ISO/IEC 18047-6:2012. Information technology. Radio frequency identification device conformance test methodsTest methods for air interface communications at 860 MHz to 960 MHz
BS ISO/IEC 18180:2013. Information technology. Specification for the Extensible Configuration Checklist Description Format (XCCDF) Version 1.2
BS ISO/IEC 18450:2013. Information technology. Telecommunications and information exchange between systems. Web Services Description Language (WSDL) for CSTA Phase III
BS ISO/IEC 1863:1990. Information processing. 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using NRZ1 at 32 ftpmm (800 ftpi). 32 cpmm (800 cpi)
BS ISO/IEC 19500-1:2012. Information technology. Object Management Group. Common Object Request Broker Architecture (CORBA)Interfaces
BS ISO/IEC 19500-2:2003. Information technology. Open distributed processingGeneral Inter-ORB Protocol (GIOP)/Internet Inter-ORB Protocol (IIOP)
BS ISO/IEC 19500-2:2012. Information technology. Object Management Group. Common Object Request Broker Architecture (CORBA)Interoperability
BS ISO/IEC 19500-3:2012. Information technology. Object Management Group. Common Object Request Broker Architecture (CORBA)Components
BS ISO/IEC 19501:2005. Information technology. Open distributed processing. Unified modeling language (UML). Version 1.4.2
BS ISO/IEC 19505-1:2012. Information technology. Object Management Group Unified Modeling Language (OMG UML)Infrastructure
BS ISO/IEC 19510:2013. Information technology. Object Management Group Business Process Model and Notation
BS ISO/IEC 19756:2011. Information technology. Topic maps. Constraint language (TMCL)
BS ISO/IEC 19757-11:2011. Information technology. Document schema definition languages (DSDL)Schema association
BS ISO/IEC 19757-2:2003. Information technology. Document Schema Definition Language (DSDL)Regular-grammar-based validation. RELAX NG
BS ISO/IEC 19757-2:2008. Information technology. Document schema definition language (DSDL)Regular-grammer-based validation. RELAX NG
BS ISO/IEC 19757-3:2006. Information technology. Document schema definition languages (DSDL)Rule-based validation. Schematron
BS ISO/IEC 19757-4:2006. Information technology. Document schema definition languages (DSDL)Namespace-based validation dispatching language (NVDL)
BS ISO/IEC 19757-5:2011. Information technology. Document schema definition languages (DSDL)Extensible datatypes
BS ISO/IEC 19757-7:2009. Information technology. Document schema definition languages (DSDL)Character repertoire description language (CREPDL)
BS ISO/IEC 19757-8:2008. Information technology. Document Schema Definition Languages (DSDL)Document Semantics Renaming Language (DSRL)
BS ISO/IEC 19757-9:2008. Information technology. Document schema definition languages (DSDL)Namespace and datatype declaration in document type definitions (DTDs)
BS ISO/IEC 19761:2003. Software engineering. COSMIC-FFP. A functional size measurement method
BS ISO/IEC 19761:2011. Software engineering. COSMIC: A functional size measurement method
BS ISO/IEC 19762-1:2005. Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabularyGeneral terms relating to AIDC
BS ISO/IEC 19762-2:2005. Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabularyOptically readable media (ORM)
BS ISO/IEC 19762-2:2008. Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabularyOptically readable media (ORM)
BS ISO/IEC 19762-3:2005. Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabularyRadio frequency identification (RFID)
BS ISO/IEC 19762-4:2008. Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabularyGeneral terms relating to radio communications
BS ISO/IEC 19762-5:2008. Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabularyLocating systems
BS ISO/IEC 19763-1:2007. Information technology. Metamodel framework for interoperability (MFI)Reference model
BS ISO/IEC 19763-3:2007. Information technology. Metamodel framework for interoperability (MFI)Metamodel for ontology registration
BS ISO/IEC 19763-3:2010. Information technology. Metamodel framework for interoperability (MFI)Metamodel for ontology registration
BS ISO/IEC 19770-1:2006. Software asset managementProcesses
BS ISO/IEC 19770-1:2012. Information technology. Software asset managementProcesses and tiered assessment of conformance
BS ISO/IEC 19770-2:2009. Information technology. Software asset managementSoftware identification tag
BS ISO/IEC 19772:2009. Information technology. Security techniques. Authenticated encryption
BS ISO/IEC 19773:2011. Information technology. Metadata registries (MDR) modules
BS ISO/IEC 19784-1:2006+A3:2010. Information technology. Biometric application programming interfaceBioAPI specification
BS ISO/IEC 19784-2:2007. Information technology. Biometric application programming interfaceBiometric archive function provider interface
BS ISO/IEC 19784-4:2011. Information technology. Biometric application programming interface Biometric sensor function provider interface
BS ISO/IEC 19785-1:2006+A1:2010. Information technology. Common biometric exchange formats frameworkData element specification
BS ISO/IEC 19785-2:2006+A1:2010. Information technology. Common biometric exchange formats frameworkProcedures for the operation of the biometric registration authority
BS ISO/IEC 19785-3:2007+A1:2010. Information technology. Common biometric exchange formats frameworkPatron format specifications
BS ISO/IEC 19785-4:2010. Information technology. Common biometric exchange formats frameworkSecurity block format specifications
BS ISO/IEC 19790:2006. Information technology. Security techniques. Security requirements for cryptographic modules
BS ISO/IEC 19790:2012. Information technology. Security techniques. Security requirements for cryptographic modules
BS ISO/IEC 19792:2009. Information technology. Security techniques. Security evaluation of biometrics
BS ISO/IEC 19793:2008. Information technology. Open distributed processing. Use of UML for ODP viewpoint specifications
BS ISO/IEC 19794-1:2006. Information technology. Biometric data interchange formatsFramework
BS ISO/IEC 19794-1:2011+A1:2013. Information technology. Biometric data interchange formatsFramework
BS ISO/IEC 19794-10:2007. Information technology. Biometric data interchange formatsHand geometry silhouette data
BS ISO/IEC 19794-11:2013. Information technology. Biometric data interchange formatsSignature/sign processed dynamic data
BS ISO/IEC 19794-14:2013. Information technology. Biometric data interchange formatsDNA data
BS ISO/IEC 19794-2:2005+A1:2010. Information technology. Biometric data interchange formatsFinger minutiae data
BS ISO/IEC 19794-2:2011. Information technology. Biometric data interchange formatsFinger minutiae data
BS ISO/IEC 19794-3:2006. Information technology. Biometric data interchange formatsFinger pattern spectral data
BS ISO/IEC 19794-4:2005. Information technology. Biometric data interchange formatsFinger image data
BS ISO/IEC 19794-4:2011+A1:2013. Information technology. Biometric data interchange formatsFinger image data
BS ISO/IEC 19794-5:2005+A2:2009. Information technology. Biometric data interchange formatsFace image data
BS ISO/IEC 19794-5:2011. Information technology. Biometric data interchange formatsFace image data
BS ISO/IEC 19794-6:2005. Information technology. Biometric data interchange formatsIris image data
BS ISO/IEC 19794-6:2011. Information technology. Biometric data interchange formatsIris image data
BS ISO/IEC 19794-7:2007. Information technology. Biometric data interchange formatsSignature/sign time series data
BS ISO/IEC 19794-8:2006. Information technology. Biometric data interchange formatsFinger pattern skeletal data
BS ISO/IEC 19794-8:2011. Information Technology. Biometric data interchange formatsFinger pattern skeletal data
BS ISO/IEC 19794-9:2007. Information technology. Biometric data interchange formatsVascular image data
BS ISO/IEC 19794-9:2011+A1:2013. Information technology. Biometric data interchange formatsVascular image data
BS ISO/IEC 19795-1:2006. Information technology. Biometric performance testing and reportingPrinciples and framework
BS ISO/IEC 19795-2:2006. Information technology. Biometric performance testing and reportingTesting methodologies for technology and scenario evaluation
BS ISO/IEC 19795-4:2008. Information technology. Biometric performance testing and reportingInteroperability performance testing
BS ISO/IEC 19795-5:2011. Information technology. Biometric performance testing and reportingAccess control scenario and grading scheme
BS ISO/IEC 19795-6:2012. Information technology. Biometric performance testing and reportingTesting methodologies for operational evaluation
BS ISO/IEC 19795-7:2011. Information technology. Biometric performance testing and reportingTesting of on-card biometric comparison algorithms
BS ISO/IEC 19796-3:2009. Information technology. Learning, education and training. Quality management, assurances and metricsReference methods and metrics
BS ISO/IEC 19798:2006. Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer components
BS ISO/IEC 1989:2002 (CD-ROM). Information technology. Programming languages. COBOL
BS ISO/IEC 1989:2002. Information technology. Programming languages. COBOL
BS ISO/IEC 1989:2002. Information technology. Programming languages. COBOL
BS ISO/IEC 20000-1:2005. Information technology. Service managementSpecification
BS ISO/IEC 20000-1:2011. Information technology. Service managementService management system requirements
BS ISO/IEC 20000-2:2005. Information technology. Service managementCode of practice
BS ISO/IEC 20000-2:2012. Information technology. Service managementGuidance on the application of service management systems
BS ISO/IEC 20000-3:2012. Information technology. Service managementGuidance on scope definition and applicability of ISO/IEC 20000-1
BS ISO/IEC 20005:2013. Information technology. Sensor networks. Services and interfaces supporting collaborative information processing in intelligent sensor networks
BS ISO/IEC 20009-1:2013. Information technology. Security techniques. Anonymous entity authenticationGeneral
BS ISO/IEC 20060:2001. Information technology. Open terminal architecture (OTA) specification. Virtual machine specification
BS ISO/IEC 20060:2010. Information technology. Open terminal architecture (OTA). Virtual machine
BS ISO/IEC 2022:1994. Information technology. Character code structure and extension techniques
BS ISO/IEC 20926:2003. Software engineering. IFPUG 4.1 Unadjusted functional size measurement method. Counting practices manual
BS ISO/IEC 20926:2009. Software and systems engineering. Software measurement. IFPUG functional size measurement method 2009
BS ISO/IEC 20944-1:2013. Information technology. Metadata Registries Interoperability and Bindings (MDR-IB)Framework, common vocabulary, and common provisions for conformance
BS ISO/IEC 20944-2:2013. Information technology. Metadata Registries Interoperability and Bindings (MDR-IB)Coding bindings
BS ISO/IEC 20944-3:2013. Information technology. Metadata Registries Interoperability and Bindings (MDR-IB)API bindings
BS ISO/IEC 20944-4:2013. Information technology. Metadata Registries Interoperability and Bindings (MDR-IB)Protocol bindings
BS ISO/IEC 20944-5:2013. Information technology. Metadata Registries Interoperability and Bindings (MDR-IB)Profiles
BS ISO/IEC 20968:2002. Software engineering. Mk II function point analysis. Counting practices manual
BS ISO/IEC 20970:2002. Information technology. Programming languages, their environments and system software interfaces. JEFF file format
BS ISO/IEC 21000-5:2004. Information technology. Multimedia framework (MPEG-21)Rights Expression Language
BS ISO/IEC 21000-6:2004. Information technology. Multimedia framework (MPEG-21)Rights data dictionary
BS ISO/IEC 21000-7:2004. Information technology. Multimedia framework (MPEG-21)Digital item adaptation
BS ISO/IEC 21117:2012. Information technology. Office equipment. Copying machines and multi-function devices. Information to be included in specification sheets and related test methods
BS ISO/IEC 21118:2012. Information technology. Office equipment
BS ISO/IEC 21827:2008. Information technology. Security techniques. Systems security engineering. Capability maturity model (SSE- CMM)
BS ISO/IEC 23026:2006. Software engineering. Recommended practice for the internet. Web site engineering, web site management, and web site life cycle
BS ISO/IEC 23270 TO 2:2003 (COVERS). Information technology. C# Language Specification
BS ISO/IEC 23270:2003 (CD). Information technology. C# Language Specification
BS ISO/IEC 23270:2003. Information technology. C# Language Specification
BS ISO/IEC 2382-1:1993. Information technology. VocabularyFundamental terms
BS ISO/IEC 2382-20:1990. Information technology. Vocabulary.System development
BS ISO/IEC 2382-23:1994. Information technology. Vocabulary.Text processing
BS ISO/IEC 2382-25:1992. Information technology. Vocabulary.Local area networks
BS ISO/IEC 2382-26:1993. Information technology. VocabularyOpen systems interconnection
BS ISO/IEC 2382-27:1994. Information technology. VocabularyOffice automation
BS ISO/IEC 2382-37:2012. Information technology. VocabularyBiometrics
BS ISO/IEC 2382-7:1989. Information technology. VocabularyComputer programming
BS ISO/IEC 23988:2007. Information technology. A code of practice for the use of information technology (IT) in the delivery of assessments
BS ISO/IEC 24570:2005. Software engineering. NESMA functional size measurement method version 2.1. Definitions and counting guidelines for the application of function point analysis
BS ISO/IEC 24703:2004. Information technology. Participant identifiers
BS ISO/IEC 24707:2007. Information technology. Common Logic (CL). A framework for a family of logic-based languages
BS ISO/IEC 24708:2008. Information technology. Biometrics. BioAPI Interworking Protocol
BS ISO/IEC 24709-1:2007. Information technology. Conformance testing for the biometric application programming interface (BioAPI)Methods and procedures
BS ISO/IEC 24709-2:2007. Information technology. Conformance testing for the biometric application programming interface (BioAPI)Test assertions for biometric service providers
BS ISO/IEC 24709-3:2011. Information technology. Conformance testing for the biometric application programming interface (BioAPI)Test assertions for BioAPI frameworks
BS ISO/IEC 24711:2006. Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer components
BS ISO/IEC 24712:2006. Colour test pages for measurement of office equipment consumable yield
BS ISO/IEC 24713-1:2008. Information technology. Biometric profiles for interoperability and data interchangeOverview of biometric systems and biometric profiles
BS ISO/IEC 24713-2:2008. Information technology. Biometric profiles for interoperability and data interchangePhysical access control for employees at airports
BS ISO/IEC 24713-3:2009. Information technology. Biometric profiles for interoperability and data interchangeBiometrics-based verification and identification of seafarers
BS ISO/IEC 24723:2006. Information technology. Automatic identification and data capture techniques. EAN.UCC composite bar code symbology specification
BS ISO/IEC 24723:2010. Information technology. Automatic identification and data capture techniques. GS1 composite bar code symbology specification
BS ISO/IEC 24724:2006. Information technology. Automatic identification and data capture techniques. Reduced space symbology (RSS) bar code symbology specification
BS ISO/IEC 24724:2011. Information technology. Automatic identification and data capture techniques. GS1 DataBar bar code symbology specification
BS ISO/IEC 24727-1:2007. Identification cards. Integrated circuit card programming interfacesArchitecture
BS ISO/IEC 24727-2:2008. Identification cards. Integrated circuit card programming interfacesGeneric card interface
BS ISO/IEC 24727-3:2008. Identification cards. Integrated circuit card programming interfacesApplication interface
BS ISO/IEC 24727-4:2008. Identification cards. Integrated circuit card programming interfacesApplication programming interface (API) administration
BS ISO/IEC 24727-5:2011. Identification cards. Integrated circuit card programming interfacesTesting procedures
BS ISO/IEC 24727-6:2010. Identification cards. Integrated circuit card programming interfacesRegistration authority procedures for the authentication protocols for interoperability
BS ISO/IEC 24728:2006. Information technology. Automatic identification and data capture techniques. MicroPDF417 bar code symbology specification
BS ISO/IEC 24730-1:2006. Information technology. Real-time locating systems (RTLS)Application program interface (API)
BS ISO/IEC 24730-2:2006. Information technology. Real-time locating systems (RTLS)2,4 GHz air interface protocol
BS ISO/IEC 24730-2:2012. Information technology. Real time locating systems (RTLS)Direct Sequence Spread Spectrum (DSSS) 2,4 GHz air interface protocol
BS ISO/IEC 24730-21:2012. Information technology. Real time locating systems (RTLS)Direct Sequence Spread Spectrum (DSSS) 2,4 GHz air interface protocol: Transmitters operating with a single spread code and employing a DBPSK data encoding and BPSK spreading scheme
BS ISO/IEC 24730-22:2012. Information technology. Real-time locating systems (RTLS)Direct Sequence Spread Spectrum (DSSS) 2,4 GHz air interface protocol: Transmitters operating with multiple spread codes and employing a QPSK data encoding and Walsh offset QPSK (WOQPSK) spreading scheme
BS ISO/IEC 24730-5:2010. Information technology. Real-time locating systems (RTLS)Chirp spread spectrum (CSS) at 2,4 GHz air interface
BS ISO/IEC 24730-61:2013. Information technology. Real time locating systems (RTLS)Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface
BS ISO/IEC 24730-62:2013. Information technology. Real time locating systems (RTLS)High rate pulse repetition frequency Ultra Wide Band (UWB) air interface
BS ISO/IEC 24734:2009. Information technology. Office equipment. Method for measuring digital printer productivity
BS ISO/IEC 24735:2009. Information technology. Office equipment. Method for measuring digital copying machine productivity
BS ISO/IEC 24735:2012. Information technology. Office equipment. Method for measuring digital copying productivity
BS ISO/IEC 24744:2007+A1:2010. Software Engineering. Metamodel for Development Methodologies
BS ISO/IEC 24745:2011. Information technology. Security techniques. Biometric information protection
BS ISO/IEC 24751-1:2008. Information technology. Individualized adaptability and accessibility in e-learning, education and trainingFramework and reference model
BS ISO/IEC 24751-2:2008. Information technology. Individualized adaptability and accessibility in e-learning, education and training'Access for all' personal needs and preferences for digital delivery
BS ISO/IEC 24751-3:2008. Information technology. Individualized adaptability and accessibility in e-learning, education and training'Access for all' digital resource description
BS ISO/IEC 24753:2011. Information technology. Radio frequency identification (RFID) for item management. Application protocol: encoding and processing rules for sensors and batteries
BS ISO/IEC 24754-1:2008. Information technology. Document description and processing languages. Minimum requirements for specifying document rendering systemsFeature specifications for document rendering systems
BS ISO/IEC 24759:2008. Information technology. Security techniques. Test requirements for cryptographic modules
BS ISO/IEC 24760-1:2011. Information technology. Security techniques. A framework for identity managementTerminology and concepts
BS ISO/IEC 24761:2009. Information technology. Security techniques. Authentication context for biometrics
BS ISO/IEC 24762:2008. Information technology. Security techniques. Guidelines for information and communications technology disaster recovery services
BS ISO/IEC 24769-2:2013. Information technology. Real-time locating systems (RTLS) device conformance test methodsTest methods for air interface communication at 2,4 GHz
BS ISO/IEC 24769-5:2012. Information technology. Automatic identification and data capture techniques. Real time locating systems (RTLS) device conformance test methodsTest methods for chirp spread spectrum (CSS) at 2,4 GHz air interface
BS ISO/IEC 24770:2012. Information technology. Real-time locating system (RTLS) device performance test methods. Test methods for air interface communication at 2,4 GHz
BS ISO/IEC 24773:2008. Software engineering. Certification of software engineering professionals. Comparison framework
BS ISO/IEC 24778:2008. Information technology. Automatic identification and data capture techniques. Aztec Code bar code symbology specification
BS ISO/IEC 24787:2010. Information technology. Identification cards. On-card biometric comparison
BS ISO/IEC 24789-1:2012. Identification cards. Card service lifeApplication profiles and requirements
BS ISO/IEC 24789-2:2011. Identification cards. Card service lifeMethods of evaluation
BS ISO/IEC 24791-1:2010. Information technology. Radio frequency identification (RFID) for item management. Software system infrastructureArchitecture
BS ISO/IEC 24791-2:2011. Information technology. Radio frequency identification (RFID) for item management. Software system infrastructureData management
BS ISO/IEC 24791-5:2012. Information technology. Radio frequency identification (RFID) for item management. Software system infrastructureDevice interface
BS ISO/IEC 25000:2005. Software engineering. Software product quality requirements and evaluation (SQuaRE). Guide to SQuaRE
BS ISO/IEC 25001:2007. Software engineering. Software product quality requirements and evaluation (SQuaRE). Planning and management
BS ISO/IEC 25010:2011. Systems and software engineering. Systems and software quality requirements and evaluation (SQuaRE). System and software quality models
BS ISO/IEC 25012:2008. Software engineering. Software product quality requirements and evaluation (SQuaRE). Data quality model
BS ISO/IEC 25020:2007. Software engineering. Software product quality requirements and evaluation (SQuaRE). Measurement reference model and guide
BS ISO/IEC 25021:2012. Systems and software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Quality measure elements
BS ISO/IEC 25030:2007. Software engineering. Software product quality requirements and evaluation (SQuaRE). Quality requirements
BS ISO/IEC 25040:2011. Systems and software engineering. Systems and software quality requirements and evaluation (SQuaRE). Evaluation process
BS ISO/IEC 25041:2012. Systems and software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Evaluation guide for developers, acquirers and independent evaluators
BS ISO/IEC 25045:2010. Systems and software engineering. Systems and software quality requirements and evaluation (SQuaRE). Evaluation module for recoverability
BS ISO/IEC 25051:2006. Software engineering. Software product quality requirements and evaluation (SQuaRE). Requirements for quality of commercial off-the-shelf (COTS) software product and instructions for testing
BS ISO/IEC 25062:2006. Software engineering. Software product quality requirements and evaluation (SQuaRE). Common industry format (CIF) for usability test reports
BS ISO/IEC 25064:2013. Systems and software engineering. Software product Quality Requirements and Evaluation (SQuaRE.) Common Industry Format (CIF) for usability: User needs report
BS ISO/IEC 2593:1993. Information technology. Telecommunications and information exchange between systems. 34-pole DTE/DCE interface connector mateability dimensions and contact number assignments
BS ISO/IEC 26300:2006+A1:2012. Information technology. Open Document Format for Office Applications (OpenDocument) v1.0
BS ISO/IEC 26511:2011. Systems and software engineering. Requirements for managers of user documentation
BS ISO/IEC 26512:2011. Systems and software engineering. Requirements for acquirers and suppliers of user documentation
BS ISO/IEC 26513:2009. Systems and software engineering. Requirements for testers and reviewers of user documentation
BS ISO/IEC 26514:2008. Software and systems engineering. Requirements for designers and developers of user documentation
BS ISO/IEC 26515:2011. Systems and software engineering. Developing user documentation in an agile environment
BS ISO/IEC 26550:2013. Software and systems engineering. Reference model for product line engineering and management
BS ISO/IEC 26551:2012. Software and systems engineering. Tools and methods for product line requirements engineering
BS ISO/IEC 26555:2013. Software and systems engineering. Tools and methods for product line technical management
BS ISO/IEC 26702:2007. Systems engineering. Application and management of the systems engineering process
BS ISO/IEC 27000:2009. Information technology. Security techniques. Information security management systems. Overview and vocabulary
BS ISO/IEC 27000:2012. Information technology. Security techniques. Information security management systems. Overview and vocabulary
BS ISO/IEC 27001:2005/BS 7799-2:2005. Information technology. Security techniques. Information security management systems. Requirements
BS ISO/IEC 27001:2013. Information technology. Security techniques. Information security management systems. Requirements
BS ISO/IEC 27002:2005, BS 7799-1:2005,BS ISO/IEC 17799:2005. Information technology. Security techniques. Code of practice for information security management
BS ISO/IEC 27002:2013. Information technology. Security techniques. Code of practice for information security controls
BS ISO/IEC 27003:2010. Information technology. Security techniques. Information security management system implementation guidance
BS ISO/IEC 27004:2009. Information technology. Security techniques. Information security management. Measurement
BS ISO/IEC 27005:2008. Information technology. Security techniques. Information security risk management
BS ISO/IEC 27005:2011. Information technology. Security techniques. Information security risk management
BS ISO/IEC 27006:2007. Information technology. Security techniques. Requirements for bodies providing audit and certification of information security management systems
BS ISO/IEC 27006:2011. Information technology. Security techniques. Requirements for bodies providing audit and certification of information security management systems
BS ISO/IEC 27007:2011. Information technology. Security techniques. Guidelines for information security management systems auditing
BS ISO/IEC 27010:2012. Information technology. Security techniques. Information security management for inter-sector and inter-organizational communications
BS ISO/IEC 27011:2008. Information technology. Security techniques. Information security management guidelines for telecommunications organizations based on ISO/IEC 27002
BS ISO/IEC 27013:2012. Information technology. Security techniques. Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1
BS ISO/IEC 27014:2013. Information technology. Security techniques. Governance of information security
BS ISO/IEC 27031:2011. Information technology. Security techniques. Guidelines for information and communication technology readiness for business continuity
BS ISO/IEC 27032:2012. Information technology. Security techniques. Guidelines for cybersecurity
BS ISO/IEC 27033-1:2009. Information technology. Security techniques. Network securityOverview and concepts
BS ISO/IEC 27033-2:2012. Information technology. Security techniquesGuidelines for the design and implementation of network security
BS ISO/IEC 27033-3:2010. Information technology. Security techniques. Network securityReference networking scenarios. Threats, design techniques and control issues
BS ISO/IEC 27033-5:2013. Information technology. Security techniques. Network securitySecuring communications across networks using Virtual Private Networks (VPNs)
BS ISO/IEC 27034-1:2011. Information technology. Security techniques. Application securityOverview and concepts
BS ISO/IEC 27035:2011. Information technology. Security techniques. Information security incident management
BS ISO/IEC 27037:2012. Information technology. Security techniques. Guidelines for identification, collection, acquisition, and preservation of digital evidence
BS ISO/IEC 29100:2011. Information technology. Security techniques. Privacy framework
BS ISO/IEC 29102:2011. Information technology. Office equipment. Method for the determination of ink cartridge photo yield for colour printing with inkjet printers and multi-function devices that contain inkjet printer components
BS ISO/IEC 29103:2011. Information technology. Office equipment. Colour photo test pages for measurement of ink cartridge yield for colour photo printing
BS ISO/IEC 29109-1:2009. Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794Generalized conformance testing methodology
BS ISO/IEC 29109-10:2010. Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794Hand geometry silhouette data
BS ISO/IEC 29109-2:2010. Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794Finger minutiae data
BS ISO/IEC 29109-4:2010. Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794Finger image data
BS ISO/IEC 29109-5:2011. Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794Face image data
BS ISO/IEC 29109-5:2012. Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794Face image data
BS ISO/IEC 29109-6:2011. Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794Iris image data
BS ISO/IEC 29109-7:2011. Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794Signature/sign time series data
BS ISO/IEC 29109-8:2011. Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794Finger pattern skeletal data
BS ISO/IEC 29109-9:2011. Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794Vascular image data
BS ISO/IEC 29115:2013. Information technology. Security techniques. Entity authentication assurance framework
BS ISO/IEC 29128:2011. Information technology. Security techniques. Verification of cryptographic protocols
BS ISO/IEC 29133:2010. Information technology. Automatic identification and data capture techniques. Quality test specification for rewritable hybrid media data carriers
BS ISO/IEC 29136:2012. Information technology. User interfaces. Accessibility of personal computer hardware
BS ISO/IEC 29141:2009. Information technology. Biometrics. Tenprint capture using biometric application programming interface (BioAPI)
BS ISO/IEC 29142-1:2013. Information technology. Print cartridge characterizationGeneral: terms, symbols, notations and cartridge characterization framework
BS ISO/IEC 29142-2:2013. Information technology. Print cartridge characterizationCartridge characterization data reporting
BS ISO/IEC 29142-3:2013. Information technology. Print cartridge characterizationEnvironment
BS ISO/IEC 29143:2011. Information technology. Automatic identification and data capture techniques. Air interface specification for mobile RFID interrogators
BS ISO/IEC 29150:2011. Information technology. Security techniques. Signcryption
BS ISO/IEC 29155-1:2011. Systems and software engineering. Information technology project performance benchmarking frameworkConcepts and definitions
BS ISO/IEC 29159-1:2010. Information technology. Biometric calibration, augmentation and fusion dataFusion information format
BS ISO/IEC 29160:2012. Information technology. Radio frequency identification for item management. RFID Emblem
BS ISO/IEC 29164:2011. Information technology. Biometrics. Embedded BioAPI
BS ISO/IEC 29167-1:2012. Information technology. Automatic identification and data capture techniquesAir interface for security services and file management for RFID architecture
BS ISO/IEC 29173-1:2012. Information technology. Mobile item identification and managementMobile RFID interrogator device protocol for ISO/IEC 18000-63 Type C
BS ISO/IEC 29175:2012. Information technology. Mobile item identification and management. User data for Mobile AIDC services
BS ISO/IEC 29176:2011. Information technology. Mobile item identification and management. Consumer privacy-protection protocol for Mobile RFID services
BS ISO/IEC 29178:2012. Information technology. Mobile item identification and management. Service broker for Mobile AIDC services
BS ISO/IEC 29182-1:2013. Information technology. Sensor networks: Sensor Network Reference Architecture (SNRA)General overview and requirements
BS ISO/IEC 29182-2:2013. Information technology. Sensor networks: Sensor Network Reference Architecture (SNRA)Vocabulary and terminology
BS ISO/IEC 29182-4:2013. Information technology. Sensor networks: Sensor Network Reference Architecture (SNRA)Entity models
BS ISO/IEC 29182-5:2013. Information technology. Sensor networks: Sensor Network Reference Architecture (SNRA)Interface definitions
BS ISO/IEC 29183:2010. Information technology. Office equipment. Method for measuring digital copying productivity of a single one-sided original
BS ISO/IEC 29191:2012. Information technology. Security techniques. Requirements for partially anonymous, partially unlinkable authentication
BS ISO/IEC 29192-1:2012. Information technology. Security techniques. Lightweight cryptographyGeneral
BS ISO/IEC 29192-2:2012. Information technology. Security techniques. Lightweight cryptographyBlock ciphers
BS ISO/IEC 29192-3:2012. Information technology. Security techniques. Lightweight cryptographyStream ciphers
BS ISO/IEC 29192-4:2013. Information technology. Security techniques. Lightweight cryptographyMechanisms using asymmetric techniques
BS ISO/IEC 29500 PARTS 1-4:2011. Information technology. Document description and processing languages. Office Open XML File Formats
BS ISO/IEC 29794-1:2009. Information technology. Biometric sample qualityFramework
BS ISO/IEC 29881:2010. Information technology. Systems and software engineering. FiSMA 1.1 functional size measurement method
BS ISO/IEC 3309:1991. Information technology. Telecommunications and information exchange between systems. High-level Data Link Control (HDLC) procedures. Frame structure
BS ISO/IEC 3309:1993. Information technology. Telecommunications and information exchange between systems. High-level data link control (HDLC) procedures. Frame structure
BS ISO/IEC 3788:1990. Information processing. 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using phase encoding at 126 ftpmm (3200 ftpi) - 63 cpmm (1600 cpi)
BS ISO/IEC 38500:2008. Corporate governance of information technology
BS ISO/IEC 40210:2011. Information technology. W3C SOAP Version 1.2Messaging Framework (Second Edition)
BS ISO/IEC 40220:2011. Information technology. W3C SOAP Version 1.2Adjuncts
BS ISO/IEC 40230:2011. Information technology. W3C SOAP Message Transmission Optimization Mechanism
BS ISO/IEC 40240:2011. Information technology. W3C Web Services Addressing 1.0. Core
BS ISO/IEC 40250:2011. Information technology. W3C Web Services Addressing 1.0. SOAP Binding
BS ISO/IEC 40260:2011. Information technology. W3C Web Services Addressing 1.0. Metadata
BS ISO/IEC 40270:2011. Information technology. W3C Web Services Policy 1.5. Framework
BS ISO/IEC 40280:2011. Information technology. W3C Web Services Policy 1.5. Attachment
BS ISO/IEC 40500:2012. Information technology. W3C Web Content Accessibility Guidelines (WCAG) 2.0
BS ISO/IEC 42010:2007. Systems and software engineering. Recommended practice for architectural description of software-intensive systems
BS ISO/IEC 4335:1991. Information technology. Telecommunications and information exchange between systems. High level data link control (HDLC) procedures. Elements of procedures
BS ISO/IEC 4335:1993. Information technology. Telecommunications and information exchange between systems. High level data link control (HDLC) procedures. Elements of procedures
BS ISO/IEC 4873:1991. Information technology. ISO 8-bit code for information interchange. Structure and rules for implementation
BS ISO/IEC 4909:2006. Identification cards. Financial transaction cards. Magnetic stripe data content for track 3
BS ISO/IEC 5218:2004. Information technology. Codes for the representation of human sexes
BS ISO/IEC 55000 Advanced Access. Asset management. Overview, principles and terminology
BS ISO/IEC 55001 Advanced Access. Asset management. Management systems. Requirements
BS ISO/IEC 55002 Advanced Access. Asset management. Management systems. Guidelines for the application of ISO 55001
BS ISO/IEC 6429:1992. Information technology. Control functions for coded character sets
BS ISO/IEC 646:1991. Information technology. ISO 7-bit coded character set for information interchange
BS ISO/IEC 6522:1992. Information technology. Programming languages. PL/I general purpose subset
BS ISO/IEC 6523-1:1998. Information technology. Structure for the identification of organizations and organization partsIdentification of organization identification schemes
BS ISO/IEC 6523-2:1998. Information technology. Structure for the identification of organizations and organization partsRegistration of organization identification schemes
BS ISO/IEC 6592:2000. Information technology. Guidelines for the documentation of computer-based application systems
BS ISO/IEC 6937:1994. Information technology. Coded graphic character set for text communication. Latin alphabet
BS ISO/IEC 7064:2003. Information technology. Security techniques. Check character systems
BS ISO/IEC 7350:1991. Information technology. Registration of repertoires of graphic characters from ISO/IEC 10367
BS ISO/IEC 7480:1991. Information technology. Telecommunications and information exchange between systems. Start-stop transmission signal quality at DTE/DCE interfaces
BS ISO/IEC 7498-3:1997. Information technology. Open systems interconnection. Basic reference modelNaming and addressing
BS ISO/IEC 7498-4:1989. Information technology. Open systems interconnection. Basic reference modelManagement framework
BS ISO/IEC 7501-1:2005. Identification cards. Machine readable travel documentsMachine readable passport
BS ISO/IEC 7501-3:1997. Identification cards. Machine readable travel documentsMachine readable official travel documents
BS ISO/IEC 7501-3:2005. Identification cards. Machine readable travel documentsMachine readable official travel documents
BS ISO/IEC 7776:1995. Information technology. Telecommunications and information exchange between systems. High-level data link control procedures. Description of the X.25 LAPB-compatible DTE data link procedures
BS ISO/IEC 7809:1991. Information technology. Telecommunications and information exchange between systems. High-level data link control (HDLC) procedures. Classes of procedures
BS ISO/IEC 7809:1993. Information technology. Telecommunications and information exchange between systems. High-level data link control (HDLC) procedures. Classes of procedures
BS ISO/IEC 7810:2003+A2:2012. Identification cards. Physical characteristics
BS ISO/IEC 7811-1:2002. Identification cards. Recording techniqueEmbossing
BS ISO/IEC 7811-2:2001. Identification cards. Recording techniqueMagnetic stripe. Low coercivity
BS ISO/IEC 7811-6:2008. Identification cards. Recording techniqueMagnetic stripe. High coercivity
BS ISO/IEC 7811-8:2008. Identification cards. Recording techniqueMagnetic stripe. Coercivity of 51,7 kA/m (650 Oe)
BS ISO/IEC 7811-9:2008. Identification cards. Recording techniqueTactile identifier mark
BS ISO/IEC 7812-1:2000. Identification cards. Identification of issuersNumbering system
BS ISO/IEC 7812-1:2006. Identification cards. Identification of issuersNumbering system
BS ISO/IEC 7812-2:2000. Identification cards. Identification of issuersApplication and registration procedures
BS ISO/IEC 7812-2:2007. Identification cards. Identification of issuersApplication and registration procedures
BS ISO/IEC 7813:2001. Identification cards. Financial transaction cards
BS ISO/IEC 7813:2006. Information technology. Identification cards. Financial transaction cards
BS ISO/IEC 7816-1:1998+A1:2003. Identification cards. Integrated circuit(s) cards with contactsPhysical characteristics
BS ISO/IEC 7816-1:2011. Identification cards. Integrated circuit cardsCards with contacts. Physical characteristics
BS ISO/IEC 7816-10:2000. Identification cards. Integrated circuit(s) cards with contactsElectronic signals and answer to reset for synchronous cards
BS ISO/IEC 7816-11:2004. Identification cards. Integrated circuit cardsPersonal verification through biometric methods
BS ISO/IEC 7816-12:2005. Identification cards. Integrated circuit cardsCards with contacts. USB electrical interface and operating procedures
BS ISO/IEC 7816-13:2007. Identification cards. Integrated circuit cardsCommands for application management in a multi-application environment
BS ISO/IEC 7816-15:2004+A2:2008. Identification cards. Integrated circuit cardsCryptographic information application
BS ISO/IEC 7816-2:1999. Identification cards. Integrated circuit(s) cards with contactsDimensions and location of the contacts
BS ISO/IEC 7816-2:2007. Identification cards. Integrated circuit cardsCards with contacts. Dimensions and location of the contacts
BS ISO/IEC 7816-3:2006. Identification cards. Integrated circuit cardsCards with contacts. Electrical interface and transmission protocols
BS ISO/IEC 7816-4:2005+A1:2008. Identification cards. Integrated circuit cardsOrganization, security and commands for interchange
BS ISO/IEC 7816-4:2013. Identification cards. Integrated circuit cardsOrganization, security and commands for interchange
BS ISO/IEC 7816-5:2004. Identification cards. Integrated circuit cardsRegistration of application providers
BS ISO/IEC 7816-6:2004. Identification cards. Integrated circuit cardsInterindustry data elements for interchange
BS ISO/IEC 7816-7:1999. Identification cards. Integrated circuit(s) cards with contactsInterindustry commands for structured cards query language (SCQL)
BS ISO/IEC 7816-8:1999. Identification cards. Integrated circuit(s) cards with contactsSecurity related interindustry commands
BS ISO/IEC 7816-8:2004. Identification cards. Integrated circuit cardsCommands for security operations
BS ISO/IEC 7816-9:2000. Identification cards. Integrated circuit(s) cards with contactsAdditional interindustry commands and security attributes
BS ISO/IEC 7816-9:2004. Identification cards. Integrated cicuit cardsCommands for card management
BS ISO/IEC 7826-1:1994. Information technology-general structures for the interchange of code valuesIdentification of coding schemes
BS ISO/IEC 7826-2:1994. Information technology-general structures for the interchange of code valuesRegistration of coding schemes
BS ISO/IEC 7942-1:1994. Information technology. Computer graphics and image processing. Graphical Kernel System (GKS)Functional description
BS ISO/IEC 7942-2:1997. Information technology. Computer graphics and image processing. Graphical Kernel System (GKS)NDC metafile
BS ISO/IEC 7942-3:1999. Information technology. Computer graphics and image processing. Graphical Kernel System (GKS)Audit trail
BS ISO/IEC 7942-4:1998. Information technology. Computer graphics and image processing. Graphical Kernel System (GKS)Picture part archive
BS ISO/IEC 80416-4:2005. Basic principles for graphical symbols for use on equipmentGuidelines for the adaptation of graphical symbols for use on screens and displays (icons)
BS ISO/IEC 8208:1990. Information technology. Data communications. X.25 packet layer protocol for data terminal equipment
BS ISO/IEC 8208:1995. Information technology. Data communications. X.25 Packet Layer Protocol for Data Terminal Equipment
BS ISO/IEC 8211:1994. Information technology. Specification for a data descriptive file for information interchange
BS ISO/IEC 8326:1996. Information technology. Open systems interconnection. Session service definition
BS ISO/IEC 8327-1:1996. Information technology. Open systems interconnection. Connection-oriented session protocolProtocol specification
BS ISO/IEC 8327-2:1996. Information technology. Open systems interconnection. Connection-oriented session protocolProtocol Implementation Conformance Statement (PICS) proforma
BS ISO/IEC 8348:1993. Information technology. Open systems interconnection. Network service definition
BS ISO/IEC 8348:1996. Information technology. Open systems interconnection. Network service definition
BS ISO/IEC 8441-1:1991. Information technology. High density digital recording (HDDR)Unrecorded magnetic tape for (HDDR) applications
BS ISO/IEC 8441-2:1991. Information technology. High density digital recording (HDDR)Guide for interchange practice
BS ISO/IEC 8473-1:1994. Information technology. Protocol for providing the connectionless-mode network serviceProtocol specification
BS ISO/IEC 8473-1:1998. Information technology. Protocol for providing the connectionless-mode network serviceProtocol specification
BS ISO/IEC 8473-2:1996. Information technology. Protocol for providing the connectionless-mode network serviceProvision of the underlying service by an ISO/IEC 8802 subnetwork
BS ISO/IEC 8473-3:1995. Information technology. Protocol for providing the connectionless-mode network serviceProvision of the underlying service by an X.25 subnetwork
BS ISO/IEC 8473-4:1995. Information technology. Protocol for providing the connectionless-mode network serviceProvision of the underlying service by a subnetwork that provides the OSI data link service
BS ISO/IEC 8473-5:1997. Information technology. Protocol for providing the connectionless-mode network serviceProvision of the underlying service by ISDN circuit-switched B-channels
BS ISO/IEC 8480:1995. Information technology. Telecommunications and information exchange between systems. DTE/DCE interface back-up control operation using ITU-T Recommendation V.24 interchange circuits
BS ISO/IEC 8481:1996. Information technology. Telecommunications and information exchange between systems. DTE to DTE direct connections
BS ISO/IEC 8482:1994. Information technology. Telecommunications and information exchange between systems. Twisted pair multipoint interconnections
BS ISO/IEC 8484:2007. Information technology. Magnetic stripes on savingsbooks
BS ISO/IEC 8571-5:1990. Information processing systems. Open systems interconnection. File transfer, access and managementProtocol Implementation Conformance Statement Proforma
BS ISO/IEC 8602:1995. Information technology. Protocol for providing the OSI connectionless-mode transport service
BS ISO/IEC 8613-1:1994. Information processing. Text and office systems. Office document architecture (ODA) and interchange format.Introduction and general principles
BS ISO/IEC 8613-10:1991. Information processing. Text and office systems. Office document architecture (ODA) and interchange format.Formal specifications
BS ISO/IEC 8613-10:1995. Information processing. Text and office systems. Office document architecture (ODA) and interchange format.Formal specifications
BS ISO/IEC 8613-11:1995. Information processing. Text and office systems. Office document architecture (ODA) and interchange format.Tabular structures and tabular layout
BS ISO/IEC 8613-12:1996. Information processing. Text and office systems. Office document architecture (ODA) and interchange format.Information technology. Open Document Architecture (ODA) and Interchange Format. Identification of document fragments
BS ISO/IEC 8613-14:1997. Information processing. Text and office systems. Office document architecture (ODA) and interchange format.Temporal relationships and non-linear structures
BS ISO/IEC 8613-2:1995. Information processing. Text and office systems. Office document architecture (ODA) and interchange format.Document structures
BS ISO/IEC 8613-3:1995. Information processing. Text and office systems. Office document architecture (ODA) and interchange format.Abstract interface for the manipulation of ODA documents
BS ISO/IEC 8613-4:1994. Information processing. Text and office systems. Office document architecture (ODA) and interchange format.Information technology. Open document architecture (ODA) and interchange format. Document profile
BS ISO/IEC 8613-5:1994. Information processing. Text and office systems. Office document architecture (ODA) and interchange format.Information technology. Open document architecture (ODA) and interchange format. Open document interchange format
BS ISO/IEC 8613-6:1994. Information processing. Text and office systems. Office document architecture (ODA) and interchange format.Information technology. Open document architecture (ODA) and interchange format. Character content architectures
BS ISO/IEC 8613-7:1994. Information processing. Text and office systems. Office document architecture (ODA) and interchange format.Information technology. Open Document Architecture (ODA) and Interchange Format. Raster graphics content architectures
BS ISO/IEC 8613-8:1994. Information processing. Text and office systems. Office document architecture (ODA) and interchange format.Geometric graphics content architectures
BS ISO/IEC 8613-9:1996. Information processing. Text and office systems. Office document architecture (ODA) and interchange format.Audio content architectures
BS ISO/IEC 8632-3:1999. Information technology. Computer graphics. Metafile for the storage and transfer of picture description informationBinary encoding
BS ISO/IEC 8632-4:1999. Information technology. Computer graphics. Metafile for the storage and transfer of picture description informationClear text encoding
BS ISO/IEC 8649:1996. Information technology. Open systems interconnection. Service definition for the association control service element
BS ISO/IEC 8650-1:1996. Information technology. Open systems interconnection. Protocol specification for the association control service elementProtocol specification
BS ISO/IEC 8650-2:1995. Information technology. Open systems interconnection. Connection-oriented protocol for the Association Control Service Element .Protocol Implementation Conformance Statement (PICS) Proforma
BS ISO/IEC 8650-2:1997. Information technology. Open systems interconnection. Protocol specification for the association control service elementProtocol implementation conformance statement (PICS) proforma
BS ISO/IEC 8651-4:1991. Information technology. Computer graphics. Graphical Kernel System (GKS) language bindingsC
BS ISO/IEC 8651-4:1995. Information technology. Computer graphics. Graphical Kernel System (GKS) language bindingsC
BS ISO/IEC 8652:1995. Programming languages. Ada
BS ISO/IEC 8652:2012. Information technology. Programming languages. Ada
BS ISO/IEC 8802-2:1994. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirementsLogical link control
BS ISO/IEC 8802-2:1998. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirementsLogical link control
BS ISO/IEC 8802-3:1992. Information technology. Local and metropolitan area networks.Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications
BS ISO/IEC 8802-3:1993. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirementsCarrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications
BS ISO/IEC 8802-3:1996. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirementsCarrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications
BS ISO/IEC 8802-4:1990. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirementsToken-passing bus access method and physical layer specifications
BS ISO/IEC 8802-5:1992. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirementsToken ring access method and physical layer specifications
BS ISO/IEC 8802-5:1998. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirementsToken ring access method and physical layer specifications
BS ISO/IEC 8802-6:1994. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirementsDistributed Queue Dual Bus (DQDB) access method and physical layer specifications
BS ISO/IEC 8806-4:1991. Information technology. Computer graphics. Graphical Kernel System for three dimensions (GKS-3D) language bindingsC
BS ISO/IEC 8822:1994. Information technology. Open systems interconnection. Presentation service definition
BS ISO/IEC 8823-1:1994. Information technology. Open systems interconnection. Connection-orientated presentation protocol.Connection-oriented presentation protocol. Protocol specification
BS ISO/IEC 8823-2:1995. Information technology. Open systems interconnection. Connection-orientated presentation protocol.Connection-oriented presentation protocol. Protocol Implementation Conformance Statement (PICS) proforma
BS ISO/IEC 8823-2:1997. Information technology. Open systems interconnection. Connection-orientated presentation protocol.Connection-oriented presentation protocol: Protocol implementation conformance statement (PICS) proforma
BS ISO/IEC 8824:1990. Information technology. Open systems interconnection. Specification of abstract syntax notation one (ASN.1)
BS ISO/IEC 8824-3:1995. Information technology. Abstract syntax notation one (ASN.1)Constraint specification
BS ISO/IEC 8824-4:1995. Information technology. Abstract syntax notation one (ASN.1)Parameterization of ASN.1 specifications
BS ISO/IEC 8825:1990. Information technology. Open systems interconnection. Specification of basic encoding rules for abstract syntax notation one (ASN.1)
BS ISO/IEC 8825-2:1996. Information technology. ASN.1 encoding rules.Specification of packed encoding rules (PER)
BS ISO/IEC 8831:1992. Information technology. Open systems interconnection. Job transfer and manipulation concepts and services
BS ISO/IEC 8832:1992. Information technology. Open systems interconnection. Specification of the basic class and full protocol for job transfer and manipulation
BS ISO/IEC 8859-1:1998. Information technology. 8-bit single-byte coded graphic character setsLatin alphabet No. 1
BS ISO/IEC 8859-10:1992. Information technology. 8-bit single-byte coded graphic character setsLatin alphabet No. 6
BS ISO/IEC 8859-10:1998. Information technology. 8-bit single-byte coded graphic character setsLatin alphabet No. 6
BS ISO/IEC 8859-13:1998. Information technology. 8-bit single-byte coded graphic character setsLatin alphabet No. 7
BS ISO/IEC 8859-14:1998. Information technology. 8-bit single-byte coded graphic character setsLatin alphabet No. 8 (Celtic)
BS ISO/IEC 8859-15:1999. Information technology. 8-bit single-byte coded graphic character setsLatin alphabet No. 9
BS ISO/IEC 8859-2:1999. Latin alphabet No. 2
BS ISO/IEC 8859-3:1999. Information technology. 8-bit single-byte coded graphic character setsLatin alphabet No. 3
BS ISO/IEC 8859-4:1998. Information technology. 8-bit single-byte coded graphic character setsLatin alphabet No. 4
BS ISO/IEC 8859-5:1999. Information technology. 8-bit single-byte coded graphic character setsLatin/Cyrillic alphabet
BS ISO/IEC 8859-6:1999. Information technology. 8-bit single-byte coded graphic character setsLatin/Arabic alphabet
BS ISO/IEC 8859-8:1999. Information technology. 8-bit single-byte coded graphic character setsLatin/Hebrew alphabet
BS ISO/IEC 8859-9:1999. Latin alphabet No. 5
BS ISO/IEC 8878:1992. Information technology. Telecommunications and information exchange between systems. Use of X.25 to provide the OSI connection-mode network service
BS ISO/IEC 8880-1:1990. Information technology. Telecommunications and information exchange between systems. Protocol combinations to provide and support the OSI network serviceGeneral principles
BS ISO/IEC 8880-2:1990. Information technology. Telecommunications and information exchange between systems. Protocol combinations to provide and support the OSI Network Service.Provision and support of the connection-mode Network Service
BS ISO/IEC 8880-2:1992. Information technology. Telecommunications and information exchange between systems. Protocol combinations to provide and support the OSI network serviceProvision and support of the connection-mode network service
BS ISO/IEC 8880-3:1990. Information technology. Telecommunications and information exchange between systems. Protocol combinations to provide and support the OSI network serviceProvision and support of the connectionless-mode Network Service
BS ISO/IEC 8881:1989. Information processing systems. Data communications. Use of the X.25 packet level protocol in local area networks
BS ISO/IEC 8882-1:1993. Information technology. Telecommunications and information exchange between systems. X.25-DTE conformance testingGeneral principles
BS ISO/IEC 8882-1:1996. Information technology. Telecommunications and information exchange between systems. X.25-DTE conformance testingGeneral principles
BS ISO/IEC 8882-2:1992. Information technology. Telecommunications and information exchange between systems. X.25-DTE conformance testingData link layer conformance test suite
BS ISO/IEC 8882-2:1995. Information technology. Telecommunications and information exchange between systems. X.25-DTE conformance testingData link layer conformance test suite
BS ISO/IEC 8882-3:1991. Information technology. Telecommunications and information exchange between systems. X.25-DTE conformance testingPacket layer conformance suite
BS ISO/IEC 8885:1991. Information technology. Telecommunications and information exchange between systems. High-level data link control (HDLC) procedures. General purpose XID frame information field content and format
BS ISO/IEC 8885:1993. Information technology. Telecommunications and information exchange between systems. High-level data link control (HDLC) procedures. General purpose XID frame information field content and format
BS ISO/IEC 8886:1992. Information technology. Telecommunications and information exchange between systems. Data link service definition for Open Systems Interconnection
BS ISO/IEC 8886:1996. Information technology. Open systems interconnection. Data link service definition
BS ISO/IEC 90003:2004. Software engineering. Guidelines for the application of ISO 9001:2000 to computer software
BS ISO/IEC 9040:1997. Information technology. Open systems interconnection. Virtual terminal basic class service
BS ISO/IEC 9041-1:1997. Information technology. Open systems interconnection. Virtual terminal basic class protocolSpecification
BS ISO/IEC 9041-2:1993. Information technology. Open systems interconnection. Virtual terminal basic class protocolProtocol implementation conformance statement (PICS proforma)
BS ISO/IEC 9041-2:1997. Information technology. Open systems interconnection. Virtual terminal basic class protocolProtocol implementation conformance statement (PICS) proforma
BS ISO/IEC 9066-1:1989. Information processing systems. Text communication. Reliable transferModel and service definition
BS ISO/IEC 9066-2:1989. Information processing systems. Text communication. Reliable transferProtocol specification
BS ISO/IEC 9066-3:1996. Information processing systems. Text communication. Reliable transferProtocol Implementation Conformance Statement (PICS) proforma
BS ISO/IEC 9072-1:1989. Information technology. Open systems interconnection. Remote operationsModel, notation and service definition
BS ISO/IEC 9072-2:1989. Information technology. Open systems interconnection. Remote operationsProtocol specification
BS ISO/IEC 9072-3:1996. Information technology. Open systems interconnection. Remote operationsProtocol Implementation Conformance Statement (PICS) proforma
BS ISO/IEC 9074:1997. Information technology. Open systems interconnection. Estelle: a formal description technique based on an extended state transition model
BS ISO/IEC 9075 1-4, 9-11, 13-14:2011. Information technology. Database languages. SQLVarious parts (CD-ROM)
BS ISO/IEC 9075 1-4,9-11,13-14:2003. Information technology. Database languages. SQLVarious parts (CD-ROM)
BS ISO/IEC 9075 1-4,9-11,13-14:2010. Information technology. Database languages. SQL.Various parts (CD-ROM)
BS ISO/IEC 9075:1992. Information technology. Database languages. SQL
BS ISO/IEC 9075-1:1999. Information technology. Database languages. SQL.Framework (SQL/framework)
BS ISO/IEC 9075-10:2000. Information technology. Database languages. SQL.Object Language Bindings (SQL/OLB)
BS ISO/IEC 9075-13:2002. Information technology. Database languages. SQL.SQL routines and types using the Java programming language (SQL/JRT)
BS ISO/IEC 9075-2:1999. Information technology. Database languages. SQL.Foundation (SQL/foundation)
BS ISO/IEC 9075-3:1995. Information technology. Database languages. SQL.Call-Level Interface (SQL/CLI)
BS ISO/IEC 9075-3:1999. Information technology. Database languages. SQL.Call-level interface (SQL/CLI)
BS ISO/IEC 9075-4:1996. Information technology. Database languages. SQL.Persistant stored modules (SQL/PSM)
BS ISO/IEC 9075-4:1999. Information technology. Database languages. SQL.Persistent stored modules (SQL/PSM)
BS ISO/IEC 9075-5:1999. Information technology. Database languages. SQL.Host language bindings (SQL/Bindings)
BS ISO/IEC 9075-9:2001 (CD-ROM). Information technology. Database languages. SQLManagement of external data (SQL/MED)
BS ISO/IEC 9075-9:2001. Information technology. Database languages. SQLManagement of external data (SQL/MED)
BS ISO/IEC 9126-1:2001. Information technology. Software product qualityQuality model
BS ISO/IEC 9281-1:1990. Information technology. Picture coding methodsIdentification
BS ISO/IEC 9281-2:1990. Information technology. Picture coding methods.Procedure for registration
BS ISO/IEC 9282-2:1992. Information processing. Coded representation of picturesIncremental encoding of point lists in a 7-bit or 8-bit environment
BS ISO/IEC 9314-5:1995. Information processing systems. Fibre Distributed Data Interface (FDDI)Hybrid Ring Control (HRC)
BS ISO/IEC 9314-6:1998. Information processing systems. Fibre Distributed Data Interface (FDDI)Station management (SMT)
BS ISO/IEC 9314-7:1998. Information processing systems. Fibre Distributed Data Interface (FDDI)Physical layer protocol (PHY-2)
BS ISO/IEC 9314-8:1998. Information processing systems. Fibre Distributed Data Interface (FDDI)Media access control-2 (MAC-2)
BS ISO/IEC 9496:1989. CCITT high level language (CHILL)
BS ISO/IEC 9496:1995. CCITT high level language (CHILL)
BS ISO/IEC 9496:2003. CHILL. The ITU-T programming language
BS ISO/IEC 9506-3:1991. Industrial automation systems. Manufacturing message specificationCompanion standard for robotics
BS ISO/IEC 9506-4:1992. Industrial automation systems. Manufacturing message specificationCompanion standard for numerical control
BS ISO/IEC 9529-1:1989, EN 29529-1:1991. Information processing systems. Data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording at 15916 ftprad, on 80 tracks on each side.Dimensional, physical and magnetic characteristics
BS ISO/IEC 9529-2:1989, EN 29529-2:1991. Information processing systems. Data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording at 15916 ftprad, on 80 tracks on each side.Track format
BS ISO/IEC 9541-1:1991+A4:2009. Information technology. Font information interchangeArchitecture
BS ISO/IEC 9541-1:2012. Information technology. Font information interchangeArchitecture
BS ISO/IEC 9541-2:1991+A2:2009. Information technology. Font information interchangeInterchange format
BS ISO/IEC 9541-2:2012. Information technology. Font information interchangeInterchange format
BS ISO/IEC 9541-3:1994+A2:2009. Information technology. Font information interchangeGlyph shape representation
BS ISO/IEC 9541-3:2013. Information technology. Font information interchangeGlyph shape representation
BS ISO/IEC 9541-4:2009. Information technology. Font information interchangeHarmonization to open font format
BS ISO/IEC 9545:1989. Information technology. Open systems interconnection. Application layer structure
BS ISO/IEC 9545:1994. Information technology. Open Systems Interconnection. Application Layer structure
BS ISO/IEC 9548-1:1996. Information technology. Open systems interconnection. Connectionless session protocolProtocol specification
BS ISO/IEC 9548-2:1995. Information technology. Open systems interconnection. Connectionless session protocolProtocol Implementation Conformance Statement (PICS) proforma
BS ISO/IEC 9549:1990. Information technology. Galvanic isolation of balanced interchange circuits
BS ISO/IEC 9574:1989. Information technology. Telecommunications and information exchange between systems. Provision of the OSI connection-mode network service by packet mode terminal equipment connected to an Integrated Services Digital Network (ISDN)
BS ISO/IEC 9574:1992. Information technology. Provision of the OSI connection-mode network service by packet mode terminal equipment to an integrated services digital network (ISDN)
BS ISO/IEC 9576:1991. Information technology. Open systems interconnection. Connectionless presentation protocol specification
BS ISO/IEC 9576-1:1995. Information technology. Open systems interconnection. Connectionless presentation protocolProtocol specification
BS ISO/IEC 9576-2:1995. Information technology. Open systems interconnection. Connectionless presentation protocolProtocol Implementation Conformance Statement (PICS) proforma
BS ISO/IEC 9579:2000. Information technology. Remote database access for SQL with security enhancement
BS ISO/IEC 9579-1:1993. Information technology. Open systems interconnection. Remote database accessGeneric model, service and protocol
BS ISO/IEC 9579-2:1993. Information technology. Open systems interconnection. Remote database accessSQL specialization
BS ISO/IEC 9579-2:1998. Information technology. Open systems interconnection. Remote database accessSQL Specialization
BS ISO/IEC 9579-3:1996. Information technology. Open systems interconnection. Remote database accessSQL specialization protocol implementation conformance statement (PICS) proforma
BS ISO/IEC 9593-1:1990. Information technology. Computer graphics. Programmer's hierarchical interactive graphics system (PHIGS) language bindingsFORTRAN
BS ISO/IEC 9593-3:1990. Information technology. Computer graphics. Programmer's hierarchical interactive graphics system (PHIGS) language bindingsAda
BS ISO/IEC 9593-4:1991. Information technology. Computer graphics. Programmer's hierarchical interactive graphics system (PHIGS) language bindingsC
BS ISO/IEC 9594-1:1990. Information technology. Open systems interconnectionOverview of concepts, models and services
BS ISO/IEC 9594-1:1995. Information technology. Open systems interconnectionOverview of concepts, models and services
BS ISO/IEC 9594-2:1990. Information technology. Open systems interconnectionModels
BS ISO/IEC 9594-2:1995. Information technology. Open systems interconnectionModels
BS ISO/IEC 9594-3:1990. Information technology. Open systems interconnectionAbstract service definition
BS ISO/IEC 9594-3:1995. Information technology. Open systems interconnectionAbstract service definition
BS ISO/IEC 9594-4:1990. Information technology. Open systems interconnectionProcedures for distributed operation
BS ISO/IEC 9594-4:1995. Information technology. Open systems interconnectionThe directory. Procedures for distributed operation
BS ISO/IEC 9594-5:1990. Information technology. Open systems interconnectionProtocol specifications
BS ISO/IEC 9594-5:1995. Information technology. Open systems interconnectionThe directory. Protocol specifications
BS ISO/IEC 9594-6:1990. Information technology. Open systems interconnectionSelected attribute types
BS ISO/IEC 9594-6:1995. Information technology. Open systems interconnectionThe directory. Selected attribute types
BS ISO/IEC 9594-7:1990. Information technology. Open systems interconnectionSelected object classes
BS ISO/IEC 9594-7:1995. Information technology. Open systems interconnectionThe directory. Selected object classes
BS ISO/IEC 9594-8:1990. Information technology. Open systems interconnectionAuthentication framework
BS ISO/IEC 9594-8:1995. Information technology. Open systems interconnectionThe directory. Authentication framework
BS ISO/IEC 9594-9:1995. Information technology. Open systems interconnectionReplication
BS ISO/IEC 9595:1990. Information technology. Open systems interconnection. Common management information service definition
BS ISO/IEC 9595:1991. Information technology. Open Systems Interconnection. Common management information service definition
BS ISO/IEC 9596:1990. Information technology. Open Systems Interconnection. Common management information protocol specification
BS ISO/IEC 9596-1:1991. Information technology. Open systems interconnection. Common management information protocolSpecification
BS ISO/IEC 9596-2:1993. Information technology. Open systems interconnection. Common management information protocolProtocol implementation conformance statement (PICS) proforma
BS ISO/IEC 9636-1:1991. Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional specificationOverview, profiles, and conformance
BS ISO/IEC 9636-2:1991. Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional specificationControl
BS ISO/IEC 9636-3:1991. Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional specificationOutput
BS ISO/IEC 9636-4:1991. Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional specificationSegments
BS ISO/IEC 9636-5:1991. Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional specificationInput and echoing
BS ISO/IEC 9636-6:1991. Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional specificationRaster
BS ISO/IEC 9637-1:1994. Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Data stream bindingCharacter encoding
BS ISO/IEC 9637-2:1992. Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Data stream bindingBinary encoding
BS ISO/IEC 9638-3:1994. Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Language bindingsAda
BS ISO/IEC 9646-2:1991, EN 29646-2:1992. Information technology. Open systems interconnection. Conformance testing methodology and frameworkAbstract test suite specification
BS ISO/IEC 9646-3:1998. Information technology. Open systems interconnection. Conformance testing methodology and frameworkThe Tree and tabular combined notation (TTCN)
BS ISO/IEC 9646-4:1991, EN 29646-4:1992. Information technology. Open systems interconnection. Conformance testing methodology and frameworkTest realization
BS ISO/IEC 9646-7:1995. Information technology. Open systems interconnection. Conformance testing methodology and frameworkImplementation conformance statements
BS ISO/IEC 9796:1991. Information technology. Security techniques. Digital signature scheme giving message recovery
BS ISO/IEC 9796-2:1997. Information technology. Security techniques. Digital signature schemes giving message recoveryMechanisms using a hash-function
BS ISO/IEC 9796-2:2002+A1:2008. Information technology. Security techniques. Digital signature schemes giving message recoveryInteger factorization based mechanisms
BS ISO/IEC 9796-2:2010. Information technology. Security techniques. Digital signature schemes giving message recoveryInteger factorization based mechanisms
BS ISO/IEC 9796-3:2006. Information technology. Security techniques. Digital signature schemes giving message recoveryDiscrete logarithm based mechanisms
BS ISO/IEC 9797:1990. Data cryptographic techniques. Data integrity mechanism using a cryptographic check function employing a block cipher algorithm
BS ISO/IEC 9797:1994. Information technology. Security techniques. Data integrity mechanism using a cryptographic check function employing a block cipher algorithm
BS ISO/IEC 9797-1:2011. Information technology. Security techniques. Message authentication codes (MACs)Mechanisms using a block cipher
BS ISO/IEC 9797-2:2002. Information technology. Security techniques. Message authentication codes (MACs)Mechanisms using a dedicated hash-function
BS ISO/IEC 9797-2:2011. Information technology. Security techniques. Message authentication codes (MACs)Mechanisms using a dedicated hashfunction
BS ISO/IEC 9797-3:2011. Information technology. Security techniques. Message Authentication Codes (MACs)Mechanisms using a universal hash-function
BS ISO/IEC 9798-1:1991. Information technology. Security techniques. Entity authentication mechanismsGeneral model
BS ISO/IEC 9798-1:1997. Information technology. Security techniques. Entity authentication mechanismsGeneral
BS ISO/IEC 9798-1:2010. Information technology. Security techniques. Entity authenticationGeneral
BS ISO/IEC 9798-2:1994. Information technology. Security techniques. Entity authentication mechanismsMechanisms using symmetric encipherment algorithms
BS ISO/IEC 9798-2:1999. Information technology. Security techniques. Entity authentication mechanismsMechanisms using symmetric encipherment algorithms
BS ISO/IEC 9798-2:2008. Information technology. Security techniques. Entity authentication Mechanisms using symmetric encipherment algorithms
BS ISO/IEC 9798-3:1993. Information technology. Security techniques. Entity authentication mechanismsEntity authentication using a public key algorithm
BS ISO/IEC 9798-3:1998+A1:2010. Information technology. Security techniques. Entity authenticationMechanisms using digital signature techniques
BS ISO/IEC 9798-4:1995. Information technology. Security techniques. Entity authentication mechanismsMechanisms using a cryptographic check function
BS ISO/IEC 9798-4:1999. Information technology. Security techniques. Entity authenticationMechanisms using a cryptographic check function
BS ISO/IEC 9798-5:1999. Information technology. Security techniques. Entity authentication mechanismsMechanisms using zero knowledge techniques
BS ISO/IEC 9798-5:2009. Information technology. Security techniques. Entity authenticationMechanisms using zero knowledge techniques
BS ISO/IEC 9798-6:2005. Information technology. Security techniques. Entity authenticationMechanisms using manual data transfer
BS ISO/IEC 9798-6:2010. Information technology. Security techniques. Entity authenticationMechanisms using manual data transfer
BS ISO/IEC 9804:1990. Information technology. Open Systems Interconnection. Service definition for the commitment, concurrency and recovery service element
BS ISO/IEC 9804:1994. Information technology. Open systems interconnection. Service definition for the commitment, concurrency and recovery service element
BS ISO/IEC 9804:1998. Information technology. Open systems interconnection. Service definition for the commitment, concurrency and recovery service element
BS ISO/IEC 9805:1990. Information technology. Open systems interconnection. Protocol specification for the commitment, concurrency and recovery service element
BS ISO/IEC 9805-1:1994. Information technology. Open systems interconnection. Protocol for the commitment, concurrency and recovery service elementProtocol specification
BS ISO/IEC 9805-1:1998. Information technology. Open systems interconnection. Protocol for the commitment, concurrency and recovery service elementProtocol specification
BS ISO/IEC 9805-2:1996. Information technology. Open systems interconnection. Protocol for the commitment, concurrency and recovery service elementProtocol implementation conformance statement (PICS) proforma
BS ISO/IEC 9834-1:1993. Information technology. Open systems interconnection. Procedures for the operation of OSI registration authoritiesInformation technology. Open systems interconnection. Procedures for the operation of OSI Registration Authorities. General procedures
BS ISO/IEC 9834-2:1993. Information technology. Open systems interconnection. Procedures for the operation of OSI registration authoritiesRegistration procedures for OSI document types
BS ISO/IEC 9834-3:1990. Information technology. Open systems interconnection. Procedures for the operation of OSI registration authoritiesRegistration of object identifier component values for joint ISO-CCITT use
BS ISO/IEC 9834-4:1991. Information technology. Open systems interconnection. Procedures for the operation of OSI registration authoritiesRegister of VTE profiles
BS ISO/IEC 9834-5:1991. Information technology. Open systems interconnection. Procedures for the operation of OSI registration authoritiesRegister of VT control object definitions
BS ISO/IEC 9834-6:1993. Information technology. Open systems interconnection. Procedures for the operation of OSI registration authoritiesApplication processes and application entities
BS ISO/IEC 9899:1999. Programming languages. C
BS ISO/IEC 9899:2011. Information technology. Programming languages. C
BS ISO/IEC 9945 (Pts 1-4):2003 (CD-ROM). Information technology. Portable operating system interface (POSIX) -Base definitions
BS ISO/IEC 9945-1:2002. Information technology. Portable operating system interface (POSIX)Base Definitions
BS ISO/IEC 9945-2:2002. Information technology. Portable operating system interface (POSIX)System Interfaces
BS ISO/IEC 9945-3:2002. Information technology. Portable operating system interface (POSIX)Shell and utilities
BS ISO/IEC 9945-4:2002. Information technology. Portable operating system interface (POSIX)Rationale
BS ISO/IEC 9973:1994. Information technology. Computer graphics and image processing. Procedures for registration of graphical items
BS ISO/IEC 9973:2006. Information technology. Computer graphics, image processing and environmental data representation. Procedures for registration of items
BS ISO/IEC 9979:1991. Data cryptographic techniques. Procedures for the registration of cryptographic algorithms
BS ISO/IEC 9979:1999. Information technology. Security techniques. Procedures for the registration of cryptographic algorithms
BS ISO/IEC 9983:1989, EN 29983:1991. Information processing systems. Designation of unrecorded flexible disk cartridges
BS ISO/IEC 9995-1:1994. Information technology. Keyboard layouts for text and office systemsGeneral principles governing keyboard layouts
BS ISO/IEC 9995-2:1994. Information technology. Keyboard layouts for text and office systemsAlphanumeric section
BS ISO/IEC 9995-3:1994. Information technology. Keyboard layouts for text and office systemsComplementary layouts of the alphanumeric zone of the alphanumeric section
BS ISO/IEC 9995-4:1994. Information technology. Keyboard layouts for text and office systemsNumeric section
BS ISO/IEC 9995-5:1994. Information technology. Keyboard layouts for text and office systemsEditing section
BS ISO/IEC 9995-6:1994. Information technology. Keyboard layouts for text and office systemsFunction section
BS ISO/IEC 9995-7:1994. Information technology. Keyboard layouts for text and office systemsSystems used to represent functions
BS ISO/IEC 9995-8:1994. Information technology. Keyboard layouts for text and office systemsAllocation of letters to the keys of a numeric keypad
BS ISO/IEC IEEE 24765:2010. Systems and software engineering. Vocabulary
BS ISO/IEC ISP 10607-1:1995. Information technology. International standardized profiles AFTnn. File transfer, access and managementSpecification of ACSE, presentation and session protocols for the use by FTAM
BS ISO/IEC ISP 10608-14:1995. Information technology. International standardized profile TAnnnn. Connection-mode transport service over connectionless-mode network serviceMAC, PHY and PMD sublayer dependent and Station Management requirements over an FDDI LAN subnetwork
BS ISO/IEC ISP 10608-5:1992. Information technology. International standardized profile TAnnnn. Connection-mode transport service over connectionless-mode network serviceTA1111/TA1121 profiles including subnetwork-dependent requirements for X.25 packet-switched data networks using virtual calls
BS ISO/IEC ISP 10609-1:1992. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network serviceSubnetwork-type independent requirements for Group TB
BS ISO/IEC ISP 10609-5:1992. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network serviceDefinition of profiles TB1111/TB1121
BS ISO/IEC ISP 10614-1:1995. Information technology. International standardized profile RC. X.25 protocol relayingSubnetwork-independent requirements
BS ISO/IEC ISP 10614-2:1995. Information technology. International standardized profile RC. X.25 protocol relayingLAN subnetwork-dependent, media-independent requirements
BS ISO/IEC ISP 10614-3:1995. Information technology. International standardized profile RC. X.25 protocol relayingCSMA/CD LAN subnetwork-dependant, media-dependant requirements
BS ISO/IEC ISP 10614-4:1995. Information technology. International standardized profile RC. X.25 protocol relayingPSDN subnetwork-dependant, media-dependant requirements for virtual calls over a permanent access
BS ISO/IEC ISP 10614-5:1995. Information technology. International standardized profile RC. X.25 protocol relayingDefinition of profile RC51.1111, X.25 protocol relaying between CSMA/CD LAN subnetworks and PSDNs using virtual calls over a PSTN leased line permanent access
BS ISO/IEC ISP 10614-6:1995. Information technology. International standardized profile RC. X.25 protocol relayingDefinition of profile RC51.1121, X.25 protocol relaying between CSMA/CD LAN subnetworks and PSDNs using virtual calls over a digital data circuit/CSDN leased line permanent access
BS ISO/IEC ISP 10615-3:1996. Information technology. International standardized profiles ADInn. OSI directoryADI21. DSA performer role
BS ISO/IEC ISP 10615-4:1996. Information technology. International standardized profiles ADInn. OSI directoryADI22. DSA invoker role
BS ISO/IEC ISP 10616:1995. Information technology. International standardized profile FDI11. Directory data definitions. Common directory use (Normal)
BS ISO/IEC ISP 11184-1:1995. Information technology. International Standardized Profiles FVT1nn. Virtual Terminal Basic Class. Register of VTE- profilesFVT121, FVT122. S-mode forms and paged VTE-profiles
BS ISO/IEC ISP 11184-2:1996. Information technology. International Standardized Profiles FVT1nn. Virtual Terminal Basic Class. Register of VTE- profilesFVT115. A-mode Generalized Telnet VTE-profile
BS ISO/IEC ISP 11184-3:1996. Information technology. International Standardized Profiles FVT1nn. Virtual Terminal Basic Class. Register of VTE- profilesFVT114. A-mode transparent VTE-profile
BS ISO/IEC ISP 11185-12:1995. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitionsFVT2116. Generalized Telnet Synch Control Object; FVT2117. Generalized Telnet Signal Control Object; FVT2118. Generalized Telnet Negotiation Control Object; FVT2119. Generalized Telnet Subnegotiation Control Object
BS ISO/IEC ISP 11185-13:1995. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitionsFVT2111. Waiting time control object
BS ISO/IEC ISP 11185-14:1995. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitionsFVT2112. Printer control object
BS ISO/IEC ISP 11185-15:1995. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitionsFVT2113. Field definition management control object
BS ISO/IEC ISP 11185-16:1995. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitionsFVT2114. Terminal signal titles control object
BS ISO/IEC ISP 11185-17:1995. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitionsFVT2115. Help text control object
BS ISO/IEC ISP 11186-1:1996. Information technology. International standardized profiles FVT3nn. Virtual terminal basic class. Register of attribute assignment type definitionsFVT321. Font assignment. Type No. 1
BS ISO/IEC ISP 11186-4:1997. Information technology. International standardized profiles FVT3nn. Virtual terminal basic class. Register of attribute assignment type definitionsFVT322. Font Assignment Type No. 2
BS ISO/IEC ISP 11187-1:1996. Information technology. International standardized profiles AVT1n, AVT2n. Virtual terminal basic class. Application profilesCommon VT protocol requirements
BS ISO/IEC ISP 11187-2:1996. Information technology. International standardized profiles AVT1n, AVT2n. Virtual terminal basic class. Application profilesCommon supporting layers requirements
BS ISO/IEC ISP 11187-3:1996. Information technology. International standardized profiles AVT1n, AVT2n. Virtual terminal basic class. Application profilesAVT22. S-mode forms application profile
BS ISO/IEC ISP 11187-4:1996. Information technology. International standardized profiles AVT1n, AVT2n. Virtual terminal basic class. Application profilesAVT23. S-mode Paged Application Profile
BS ISO/IEC ISP 11187-5:1996. Information technology. International standardized profiles AVT1n, AVT2n. Virtual terminal basic class. Application profilesAVT16. A-mode generalized telnet application profile
BS ISO/IEC ISP 11187-6:1996. Information technology. International standardized profiles AVT1n, AVT2n. Virtual terminal basic class. Application profilesAVT15. A-mode transparent application profile
BS ISO/IEC ISP 11188-2:1996. Information technology. International standardized profiles. Common upper layer requirementsBasic connection oriented requirements for ROSE-based profiles
BS ISO/IEC ISP 11188-3:1996. Information technology. International standardized profiles. Common upper layer requirementsMinimal OSI upper layer facilities
BS ISO/IEC ISP 11189:1997. Information technology. International standardized profile FD12. Directory data definitions. MHS use of the directory
BS ISO/IEC ISP 12059-0:1995. Information technology. International standardized profiles. OSI management. Common information for management functionsCommon definitions for management function profiles
BS ISO/IEC ISP 12059-1:1995. Information technology. International standardized profiles. OSI management. Common information for management functionsObject management
BS ISO/IEC ISP 12059-13:1996. Information technology. International standardized profiles. OSI management. Common information for management functionsSummarization
BS ISO/IEC ISP 12059-2:1995. Information technology. International standardized profiles. OSI management. Common information for management functionsState management
BS ISO/IEC ISP 12059-3:1995. Information technology. International standardized profiles. OSI management. Common information for management functionsAttributes for representing relationships
BS ISO/IEC ISP 12059-4:1995. Information technology. International standardized profiles. OSI management. Common information for management functionsAlarm reporting
BS ISO/IEC ISP 12059-5:1995. Information technology. International standardized profiles. OSI management. Common information for management functionsEvent report management
BS ISO/IEC ISP 12059-6:1995. Information technology. International standardized profiles. OSI management. Common information for management functionsLog control
BS ISO/IEC ISP 12060-1:1995. Information technology. International standardized profiles. OSI management. Management functionsAOM211. General management capabilities
BS ISO/IEC ISP 12060-2:1995. Information technology. International standardized profiles. OSI management. Management functionsAOM212. Alarm reporting and state management capabilities
BS ISO/IEC ISP 12060-3:1995. Information technology. International standardized profiles. OSI management. Management functionsAOM213. Alarm reporting capabilities
BS ISO/IEC ISP 12060-4:1995. Information technology. International standardized profiles. OSI management. Management functionsAOM221. General event report management
BS ISO/IEC ISP 12060-5:1995. Information technology. International standardized profiles. OSI management. Management functionsAOM231. General log control
BS ISO/IEC ISP 12060-8:1996. Information technology. International standardized profiles. OSI management. Management functionsAOM253x. Summarization objects (including profiles AOM2531-AOM2539)
BS ISO/IEC ISP 12067-1:1996. Information technology. International standardized profile RB. Relaying the connection-mode network serviceSubnetwork-independent requirements
BS ISO/IEC ISP 12067-2:1996. Information technology. International standardized profile RB. Relaying the connection-mode network serviceLAN subnetwork-dependent media-independent requirements
BS ISO/IEC ISP 12067-3:1996. Information technology. International standardized profile RB. Relaying the connection-mode network servicePSDN subnetwork-dependent media-dependent requirements for virtual calls over a permanent access
BS ISO/IEC ISP 12067-4:1996. Information technology. International standardized profile RB. Relaying the connection-mode network serviceDefinition of profile RB51.1111, relaying the connection-mode network service betweeen CSMA/CD LAN subnetworks and PSDNs using virtual calls over a PSTN leased line permanent access
BS ISO/IEC ISP 12067-5:1996. Information technology. International standardized profile RB. Relaying the connection-mode network serviceDefinition of profile RB51.1121, relaying the connection-mode network service between CSMA/CD LAN subnetworks and PSDNs using virtual calls over a digital data circuit/CSDN leased line permanent access
BS ISO/IEC ISP 12073:2000. Information technology. International standardized profile FD16 directory data definitions. EDI use of the directory
BS ISO/IEC ISP 15121-1:1997. Information technology. International standardized profile AOD1n. Interactive manipulation of ODA Documents.AOD11. DTAM/Read only
BS ISO/IEC ISP 15121-2:1997. Information technology. International standardized profile AOD1n. Interactive manipulation of ODA Documents.AOD12. DTAM/Insert
BS ISO/IEC ISP 15121-3:1997. Information technology. International standardized profile AOD1n. Interactive manipulation of ODA Documents.AOD13. DTAM/Manipulation
BS ISO/IEC ISP 15122-2:1999. Information technology. International standardized profiles AOM3nn. OSI managementAOM312. Lower layer systems and network management ensemble for TB/TC/TD/TE/RB/RC/profiles
BS ISO/IEC ISP 15125-7:1998. Information technology. International Standardized Profiles ADYnn. OSI DirectoryADY43. DSA to DSA authentication
BS ISO/IEC ISP 15287-2:2000. Information technology. Standardized application environment profilePosix Realtime Application Support (AEP)
BS ISO/IEC TR 10000-1:1990. Information technology. Framework and taxonomy of international standardized profiles.Framework
BS ISO/IEC TR 10000-1:1992. Information technology. Framework and taxonomy of international standardized profilesFramework
BS ISO/IEC TR 10000-1:1995. Information technology. Framework and taxonomy of international standardized profilesGeneral principles and documentation framework
BS ISO/IEC TR 10000-2:1990. Information technology. Framework and taxonomy of international standardized profiles.Taxonomy of profiles
BS ISO/IEC TR 10000-2:1992. Information technology. Framework and taxonomy of international standardized profilesTaxonomy of OSI profiles
BS ISO/IEC TR 10000-2:1994. Information technology. Framework and taxonomy of international standardized profilesPrinciples and taxonomy for OSI profiles
BS ISO/IEC TR 10000-2:1995. Information technology. Framework and taxonomy of international standardized profilesPrinciples and taxonomy for OSI profiles
BS ISO/IEC TR 10000-3:1995. Information technology. Framework and taxonomy of international standardized profilesPrinciples and taxonomy for open system environment profiles
BS ISO/IEC TR 10023:1992. Information technology. Telecommunications and information exchange between systems. Formal description of ISO 8072 in LOTOS
BS ISO/IEC TR 10024:1992. Information technology. Telecommunications and information exchange between systems. Formal description of ISO 8073 (Classes 0,1,2,3) in LOTOS
BS ISO/IEC TR 10034:1990. Guidelines for the preparation of conformity clauses in programming language standards
BS ISO/IEC TR 10037:1991. Information technology. SGML and Text-entry Systems. Guidelines for SGML Syntax-Directed Editing Systems
BS ISO/IEC TR 10091:1995. Information technology. Technical aspects of 130 mm optical disk cartridge write-once recording format
BS ISO/IEC TR 10167:1991. Information technology. Open systems interconnection. Guidelines for the application of Estelle, LOTOS and SDL
BS ISO/IEC TR 10171:1994. Information technology. Telecommunications and information exchange between systems. List of standard data link layer protocols that utilize High-Level Data Link Control (HDLC) classes of procedures and list of standardized XID format identifiers and private parameter set identification values
BS ISO/IEC TR 10172:1991. Information technology. Telecommunications and information exchange between systems. Network Transport Protocol interworking specification
BS ISO/IEC TR 10176:1991. Information technology. Guidelines for the preparation of programming language standards
BS ISO/IEC TR 10176:2001. Information technology. Guidelines for the preparation of programming language standards
BS ISO/IEC TR 10178:1992. Information technology. Telecommunications and information exchange between systems. The structure and coding of Logical Link Control addresses in Local Area Networks
BS ISO/IEC TR 10182:1993. Information technology. Programming languages, their environments and system software interfaces. Guidelines for language bindings
BS ISO/IEC TR 10183-1:1993. Information technology. Text and office systems. Office Document Architecture (ODA) and interchange format. Technical Report on ISO 8613 implementation testingTesting methodology
BS ISO/IEC TR 10183-2:1993. Information technology. Text and office systems. Office Document Architecture (ODA) and interchange format. Technical Report on ISO 8613 implementation testingFramework for abstract test cases
BS ISO/IEC TR 10730:1993. Information technology. Open systems interconnection. Tutorial on naming and addressing
BS ISO/IEC TR 10735:1993. Information technology. Telecommunications and information exchange between systems. Standard group MAC addresses
BS ISO/IEC TR 10738:1993. Information technology. Local and metropolitan area networks. Token ring access method and physical layer specifications. Recommended practice for use of unshielded twisted pair cable (UTP) for token ring data transmission at 4 Mbit/s
BS ISO/IEC TR 11589:1995. Information technology. Open systems interconnection. LOTOS description of the CCR service
BS ISO/IEC TR 11590:1995. Information technology. Open systems interconnection. LOTOS description of the CCR protocol
BS ISO/IEC TR 11735:1996. Information technology. Extensions for real-time Ada
BS ISO/IEC TR 11802-1:1995. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Technical reports and guidelines.The structure and coding of Logical Link Control addresses in Local Area Networks
BS ISO/IEC TR 11802-1:1997. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Technical reports and guidelines.The structure and coding of Logical Link Control addresses in Local Area Networks
BS ISO/IEC TR 11802-2:1995. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Technical reports and guidelines.Standard Group MAC Addresses
BS ISO/IEC TR 11802-2:1996. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Technical reports and guidelines.Standard group MAC addresses
BS ISO/IEC TR 11802-2:1997. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Technical reports and guidelines.Standard group MAC addresses
BS ISO/IEC TR 11802-2:1999. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Technical reports and guidelines.Standard group MAC addresses
BS ISO/IEC TR 11802-4:1994. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Technical reports and guidelines.Token ring access method and physical layer specifications. Fibre optic station attachment
BS ISO/IEC TR 11802-5:1997. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Technical reports and guidelines.Media access control (MAC) bridging of Ethernet V2.0 in Local Area Networks
BS ISO/IEC TR 12182:1998. Information technology. Categorization of software
BS ISO/IEC TR 12382:1989. Permuted index of the vocabulary of information processing
BS ISO/IEC TR 12382:1992. Permuted index of the vocabulary of information technology
BS ISO/IEC TR 13233:1995. Information technology. Interpretation of accreditation requirements in ISO/IEC Guide 25. Accreditation of information technology and telecommunications testing laboratories for software and protocol testing services
BS ISO/IEC TR 13243:1999. Information technology. Quality of service. Guide to methods and mechanisms
BS ISO/IEC TR 13335-1:1996. Information technology. Guidelines for the management of IT securityConcepts and models for IT Security
BS ISO/IEC TR 13335-2:1997. Information technology. Guidelines for the management of IT securityManaging and planning IT Security
BS ISO/IEC TR 13335-3:1998. Information technology. Guidelines for the management of IT securityTechniques for the management of IT security
BS ISO/IEC TR 13335-4:2000. Information technology. Guidelines for the management of IT securitySelection of safeguards
BS ISO/IEC TR 13335-5:2001. Information technology. Guidelines for the management of IT securityManagement guidance of network security
BS ISO/IEC TR 13561:1994. Information technology. Guidelines for effective use of optical disk cartridges conforming to ISO/IEC 10090
BS ISO/IEC TR 13818-5:1997. Information technology. Generic coding of moving pictures and associated audio informationSoftware simulation
BS ISO/IEC TR 14143-4:2002. Information technology. Software measurement. Functional size measurementReference model
BS ISO/IEC TR 14252:1996. Information technology. Guide to the POSIX open system environment (OSE)
BS ISO/IEC TR 14369:1999. Information technology. Programming languages, their environments and system software interfaces. Guidelines for the preparation of Language-Independent Service Specifications (LISS)
BS ISO/IEC TR 14471:1999. Information technology. Software engineering. Guidelines for the adoption of CASE tools
BS ISO/IEC TR 14496-9:2004. Information technology. Coding of audio-visual objectsReference hardware description
BS ISO/IEC TR 14516:2002. Information technology. Security techniques. Guidelines for the use and management of trusted third party services
BS ISO/IEC TR 14759:1999. Software engineering. Mock up and prototype. A categorization of software mock up and prototype models and their use
BS ISO/IEC TR 15271:1998. Information technology. Guide for ISO/IEC 12207. (Software life cycle processes)
BS ISO/IEC TR 15285:1998. Information technology. An operational model for characters and glyphs
BS ISO/IEC TR 15294:2000. Information technology. Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces
BS ISO/IEC TR 15410:1998. Information technology. Telecommunications and information exchange between systems. PISN mobility-general principles and services aspects
BS ISO/IEC TR 15504-2:1998. Information technology. Software process assessmentA reference model for processes and process capability
BS ISO/IEC TR 15504-3:1998. Information technology. Software process assessmentPerforming an assessment
BS ISO/IEC TR 15504-4:1998. Information technology. Software process assessmentGuide to performing assessments
BS ISO/IEC TR 15504-5:1999. Information technology. Software process assessmentAn assessment model and indicator guidance
BS ISO/IEC TR 15504-6:1998. Information technology. Software process assessmentGuide to competency of assessors
BS ISO/IEC TR 15504-7:1998. Information technology. Software process assessmentGuide for use in process improvement
BS ISO/IEC TR 15504-8:1998. Information technology. Software process assessmentGuide for use in determining supplier process capability
BS ISO/IEC TR 15504-9:1998. Information technology. Software process assessmentVocabulary
BS ISO/IEC TR 15580:1998. Information technology. Programming languages. Fortran. Floating-point exception handling
BS ISO/IEC TR 15580:2001. Information technology. Programming languages. Fortran. Floating-point exception handling
BS ISO/IEC TR 15581:1998. Information technology. Programming languages. Fortran. Enhanced data type facilities
BS ISO/IEC TR 15581:2001. Information technology. Programming languages. Fortran. Enhanced data type facilities
BS ISO/IEC TR 15846:1998. Information technology. Software life cycle processes. Configuration management
BS ISO/IEC TR 15942:2000. Information technology. Programming languages. Guide for the use of the Ada programming language in high integrity systems
BS ISO/IEC TR 15947:2002. Information technology. Security techniques. IT intrusion detection framework
BS ISO/IEC TR 18047-3:2004. Information technology. Radio frequency identification device conformance test methodsTest methods for air interface communications at 13,56 MHz
BS ISO/IEC TR 18047-4:2004. Information technology. Radio frequency identification device conformance test methodsTest methods for air interface communications at 2,45 GHz
BS ISO/IEC TR 8802-1:1994. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirementsOverview of local area network standards
BS ISO/IEC TR 8802-1:1997. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirementsOverview of local area network standards
BS ISO/IEC TR 9294:1990. Information technology. Guidelines for the management of software documentation
BS ISO/IEC TR 9571:1989. Information technology. Open systems interconnection. LOTOS description of the session service
BS ISO/IEC TR 9572:1989. Information technology. Open systems interconnection. LOTOS description of the session protocol
BS ISO/IEC TR 9573-11:1992. Information processing. SGML support facilities. Techniques for using SGMLApplication at ISO Central Secretariat for International Standards and Technical Reports
BS ISO/IEC TR 9573-13:1991. Information processing. SGML support facilities. Techniques for using SGMLPublic entity sets for mathematics and science
BS ISO/IEC TR 9575:1990. Information technology. Telecommunications and information exchange between systems. OSI routeing framework
BS ISO/IEC TR 9577:1990. Information technology. Telecommunications and information exchange between systems. Protocol identification in the network layer
BS ISO/IEC TR 9577:1993. Information technology. Telecommunications and information exchange between systems. Protocol identification in the network layer
BS ISO/IEC TR 9577:1996. Information technology. Protocol identification in the network layer
BS ISO/IEC TR 9578:1990. Information technology. Communication interface connectors used in local area networks
BS ISO/IEC TR14496-9:2004 (CD-ROM). BSISO/IECTR14496-9:2004 Information technology - Coding of audio-visual objectsPart 9:Reference Hardware Description
BS ISO/IEC TR14496-9:2004 (COVERS). Information technology. Coding of audio-visual objectsReference hardware description
BS ISO/IEC/IEEE 15289:2011. Systems and software engineering. Content of life-cycle information products (documentation)
BS ISO/IEC/IEEE 29119-1:2013. Software and systems engineering. Software testingConcepts and definitions
BS ISO/IEC/IEEE 29119-2:2013. Software and systems engineering. Software testingTest processes
BS ISO/IEC/IEEE 29119-3:2013. Software and systems engineering. Software testingTest documentation
BS ISO/IEC/IEEE 29148:2011. Systems and software engineering. Life cycle processes. Requirements engineering
BS ISO/IEC/IEEE 31320-1:2012. Information technology. Modeling LanguagesSyntax and Semantics for IDEF0
BS ISO/IEC/IEEE 42010:2011. Systems and software engineering. Architecture description
BS ISO/IEC/IEEE 80005-1:2012. Utility connections in portHigh Voltage Shore Connection (HVSC) Systems. General requirements
BS ISO/OECD 789-10:2006. Agricultural tractors. Test proceduresHydraulic power at tractor/implement interface
BS ISO/PAS 12006-3:2001. Building construction. Organization of information about construction worksFramework for object-oriented information exchange
BS ISO/PAS 17984:2001. Machine-made textile floor coverings. Determination of dimensional changes after exposure to heat and/or water
BS ISO/TR 10064-4:1998. Code of inspection practiceRecommendations relative to surface texture and tooth contact pattern checking
BS ISO/TR 10303-12:1997. Industrial automation systems and integration. Product data representation and exchangeDescription methods. The EXPRESS-I language reference manual
BS ISO/TR 11696-1:1999. Uses of reaction to fire test resultsApplication of test results to predict fire performance of internal linings and other building products
BS ISO/TR 11696-2:1999. Uses of reaction to fire test resultsFire hazard assessment of construction products
BS ISO/TR 12031:2000. Micrographics. Inspection of silver-gelatin microforms for evidence of deterioration
BS ISO/TR 12391-1:2001. Gas cylinders. Refillable seamless steel. Performance testsPhilosophy, background and conclusions
BS ISO/TR 12391-2:2002. Gas cylinders. Refillable seamless steel. Performance testsFracture performance tests. Monotonic burst tests
BS ISO/TR 12391-3:2002. Gas cylinders. Refillable seamless steel. Performance testsFracture performance tests. Cyclical burst tests
BS ISO/TR 12470:1998. Fire resistance tests. Guidance on the application and extension of results
BS ISO/TR 12765:1998. Measurement of fluid flow in closed conduits. Methods using transit-time ultrasonic flowmeters
BS ISO/TR 13387-1:1999. Fire safety engineeringApplication of fire performance concepts to design objectives
BS ISO/TR 13387-2:1999. Fire safety engineeringDesign fire scenarios and design fires
BS ISO/TR 13387-3:1999. Fire safety engineeringAssessment and verification of mathematical fire models
BS ISO/TR 13387-4:1999. Fire safety engineeringInitiation and development of fire and generation of fire effluents
BS ISO/TR 13387-5:1999. Fire safety engineeringMovement of fire effluents
BS ISO/TR 13387-6:1999. Fire safety engineeringStructural response and fire spread beyond the enclosure of origin
BS ISO/TR 13387-7:1999. Fire safety engineeringDetection, activation and suppression
BS ISO/TR 13387-8:1999. Fire safety engineeringLife safety. Occupant behaviour, location and condition
BS ISO/TR 13739:1998, ISO/TR 13739:1998. Petroleum products. Methods of specifying practical procedures for the transfer of bunker fuels to ships
BS ISO/TR 13989-1:2000. Calculation of scuffing load capacity of cylindrical, bevel and hypoid gearsFlash temperature method
BS ISO/TR 13989-2:2000. Calculation of scuffing load capacity of cylindrical, bevel and hypoid gearsIntegral temperature method
BS ISO/TR 14179-1:2001. Gears. Thermal capacityRating gear drives with thermal equilibrium at 95°C sump temperature
BS ISO/TR 14179-2:2001. Gears. Thermal capacityThermal load carrying capacity
BS ISO/TR 14396:1996. Reciprocating internal combustion engines. Determination and method for the measurement of engine power
BS ISO/TR 14696:1999. Reaction to fire tests. Determination of fire parameters of materials, products and assemblies using an intermediate scale heat release calorimeter (ICAL)
BS ISO/TR 14697:1997. Fire tests. Guidance on the choice of substrates for building products
BS ISO/TR 15070:1996. Series 1 freight containers. Rationale for design and structural test criteria
BS ISO/TR 16386:1999. Impact of changes in ISO fluid power particle counting. Contamination control and filter test standards
BS ISO/TR 19121:2000. Geographic information. Imagery and gridded data
BS ISO/TR 3666:1998. Viscosity of water
BS ISO/TR 5659-3:1999. Plastics. Smoke generationDetermination of optical density by a dynamic flow method
BS ISO/TR 6809:1996. Rubber compounding ingredients. Carbon black. Standard reference blacks
BS ISO/TR 7470:1988. Valve outlets for gas cylinders. List of provisions which are either standardized or in use
BS ISO/TR 9464:1998. Guide to the use of ISO 5167-1:1991
BS ISO/TR 9494:1997, ISO/TR 9494:1997. Petroleum liquids. Automatic pipeline sampling. Statistical assessment of performance of automatic samplers determining the water content in hydrocarbon liquids
BS ISO/TS 12927:1999. Lubricants, industrial oils and related products (class L). Family M (metalworking). Guidelines for establishing specifications
BS ISO/TS 12928:1999, ISO/TS 12928:1999. Lubricants, industrial oils and related products (class L). Family R (products for temporary protection against corrosion). Guidelines for establishing specifications
BS ISO/TS 13725:2001. Hydraulic fluid power. Cylinders. Method for determining the buckling load
BS ISO/TS 15768:2000. Measurement of liquid velocity in open channels. Design, selection and use of electromagnetic current meters
BS ISO/TS 15769:2000. Hydrometric determination. Liquid flow in open channels and partly filled pipes. Guidelines for the application of Doppler-based flow measurements
BS ISO/TS 16799:1999. Rolling bearings. Dynamic load ratings and rating life. Discontinuities in the calculating of basic dynamic load ratings
BS ISO/TS 16922:2002. Natural gas. Guidelines for odorizing gases
BS L 102:1971. Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS L 103:1971. Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS L 105:1971. Specification for tube of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS L 109:1971. Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6)
BS L 110:1971. Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy (supplied for solution treatment by the user) (Cu 4.4, Mg 1.5, Mn 0.6)
BS L 111:1971. Specification for bars and extruded sections of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
BS L 112:1971. Specification for forging stock and forgings of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
BS L 113:1971. Specification for sheet and strip of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
BS L 114:1971. Specification for tube of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (not exceeding 10 mm wall thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
BS L 115:1971. Specification for plate of aluminium-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (not exceeding 25 mm thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
BS L 117:1975. Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: not tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)
BS L 118:1975. Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)
BS L 119:1975. Specification for ingots and castings of aluminium-copper-nickel-manganese-titanium-zirconium-cobalt-antimony alloy (solution treated and artificially aged) (Cu 5.0, Ni 1.5, Mn 0.25, Ti 0.2, Zr 0.2, Co 0.2, Sb 0.2)
BS L 154:1977. Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and aged at room temperature) (Cu 4, Si 1)
BS L 155:1977. Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and artificially aged) (Cu 4, Si 1)
BS L 156:1978. Specification for sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 157:1978. Specification for sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 158:1978. Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 159:1978. Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 160:1976. Specification. Bars and extruded sections of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
BS L 161:1976. Specification. Hand and die forgings of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
BS L 162:1976. Specification. Cold compressed hand forgings of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
BS L 163:1978. Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated, cold worked for flattening and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 164:1978. Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 165:1978. Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 166:1978. Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 167:1978. Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 168:1978. Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS L 169:1986. Specification for ingots and castings of aluminium-silicon-magnesium alloy (solution treated and artificially aged) (Si 7, Mg 0.6)
BS L 170:1989. Specification for extruded bars and sections of aluminium-zinc-copper-chromium alloy (solution treated, controlled stretched and artificially aged) (not exceeding 150 mm diameter or minor sectional dimension) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.23) (7075)
BS L 171:1990. Specification for forging of aluminium-zinc-magnesium-manganese-copper alloy (supplied as-forged or annealed for subsequent heat treatment) (not exceeding 150 mm diameter or minor sectional dimension) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014)
BS L 172:1989. Specification for extruded, rolled or cast forging stock of aluminium-zinc-magnesium-manganese-copper alloy (for manufacture of forgings to BS L 171) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014)
BS L 173:1991. Specification for castings of aluminium-silicon-magnesium alloy, chill cast (solution treated and precipitation treated to an overaged (T7) condition)
BS L 174:1991. Specification for castings of aluminium-silicon-magnesium alloy, sand cast (solution treated and precipitation treated to an overaged (T7) condition)
BS L 512:1973. Specification for bars and extruded sections of magnesium-6% aluminium-zinc alloy (not exceeding 150 mm diameter or minor sectional dimension) (Al 6.0, Zn 1.0)
BS L 513:1973. Specification for forging stock and forgings of magnesium-6% aluminium-zinc alloy (Al 6.0, Zn 1.0)
BS L 514:1973. Specification for forging stock and forgings of magnesium-3% zinc-zirconium alloy (Zn 3.0, Zr 0.6)
BS L 515:1973. Specification for sheet and strip of magnesium-1¼% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (Zn 1.25, Zr 0.6)
BS M 22:1949. Specification for silica gel acid activated for aircraft purposes
BS M 24:1955. Graphical symbols for aircraft hydraulic and pneumatic systems
BS M 25:1957. Chemical preparations for chemical closets (portable type) for aircraft
BS M 26:1957. Chemical preparations for chemical closets (re-circulation type) for aircraft
BS M 29:1967. Specification for hand-operated portable fire extinguishers for aircraft
BS M 31:1970. Recommendations for symbols for flight dynamics
BS M 31:Supplement No. 1:1974. Recommendations for symbols for flight dynamics
BS M 32:1969. Specification for dimensions of aircraft accessory drives and mounting pads
BS M 33:1970. Specification for dimensions of elastomeric toroidal sealing rings (inch series) to Class 1 tolerances for aircraft
BS M 34:1970. Method of preparation and use of radiographic techniques
BS M 36:1970. Method for ultrasonic testing of special forgings by an immersion technique using flat-bottomed holes as a reference standard
BS M 37:1970. Method for the etch inspection of metallic materials and components
BS M 38:1971. Guide to compilation of instructions and reports for the in-service non-destructive testing of aerospace products
BS M 39:1972. Method for penetrant inspection of aerospace materials and components
BS M 40:1972. Methods for measuring coating thickness by non-destructive testing
BS M 42:1972. Methods for non-destructive testing of fusion and resistance welds in thin gauge materials
BS M 43:1973. Methods of zoning aircraft and referencing access doors and panels
BS M 44:1974. Specification for identification of aircraft servicing, maintenance, ground handling and safety/hazard points
BS M 45:1974. Specification for aircraft tyres
BS M 47:1975. Specification for retreaded tyres for aircraft
BS M 48:1975. Specification for dimensions of elastomeric toroidal sealing rings for aerospace use - inch series
BS M 49:1977, ISO 3323-1976. Specification for marking of hydraulic components
BS M 50:1980, ISO 1464-1979. Specification for clearance dimensions for tripod jacks for aircraft
BS M 51:1982, ISO 6771-1981. Classification for pressure and temperature for fluid systems and components
BS M 52:1983, ISO 6772-1981. Method for impulse testing of hydraulic hose, tubing and fittings assemblies for aerospace fluid systems
BS M 53:1983, ISO 6773:1982. Method for thermal shock testing of pipes and fittings for aerospace fluid systems
BS M 54:1982. Specification for temperature control in the heat treatment of metals
BS M 55:1984, ISO 7257:1983. Method for rotary flexure testing of hydraulic tubing joints and fittings for aerospace use
BS M 56:1985, ISO 7258:1984. Methods for determination of density and relative density of polytetrafluoroethylene (PTFE) tubing for aerospace applications
BS M 57:1985, ISO 7313-1984. Specification for high temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE) for aerospace applications
BS M 58:1986, ISO 8080-1985. Specification for anodic coating of titanium and titanium alloys by the sulphuric acid process
BS M 59:1986, ISO 7319-1982. Specification for interface of metric couplings for aerospace fluid systems
BS M 60:1986, ISO 7169:1984. Specification for separable tube fittings for fluid systems
BS M 61:1989, ISO 7315-1988. Specification for envelope dimensions of "P" clamps (loop clamps) for fluid systems
BS M 62:1987, ISO 7661-1984. Specification for design and qualification testing of clamp blocks for fluid system tube lines having axial alignment. Metric series
BS M 63:1987, ISO 7320:1985. Specification for dimensions for fluid system port connection, seal and fitting end
BS M 64:1987, ISO 8177-1986. Specification for dimensions of omega clamps (saddle clamps) for fluid tubing installations
BS M 65:1987, ISO 8278:1986. Specification for pressure compensated variable delivery hydraulic pumps
BS M 66:1987, ISO 8479-1986. Specification for dimensions of 'Q' clamps (centre-mounted clamps) for fluid systems
BS M 67:1988, ISO 9031:1987. Specification for symbols for the pictorial representation of aircraft cargo handling systems for unit load devices (ULDs)
BS M 68:1992, ISO 9469:1991. Specification for air cargo unit load devices for transportation of horses
BS M 69:1993, ISO 4117:1993. Air cargo equipment. Air and air/land cargo pallets. Specification and testing
BS M 70:1993, ISO 6517:1992. Air cargo equipment. Base-restrained certified containers exclusively for the lower deck of high-capacity aircraft
BS M 71:1994, ISO 4171:1993. Air cargo equipment. Interline pallets
BS M 72:1994, ISO 8097:1993. Air cargo equipment. Minimum airworthiness requirements and test conditions for certified air cargo unit load devices
BS M 73:1994, ISO 9666:1993. Aircraft. Self-propelled lavatory-servicing vehicle. Functional requirements
BS M 74:1994, ISO 6966:1993. Air cargo equipment. Basic requirements for aircraft loading equipment
BS M 75:1994, ISO 11075:1993. Aircraft de-icing/anti-icing Newtonian fluids, ISO type I
BS M 76:1994, ISO 11076:1993. Aerospace. Aircraft de-icing/anti-icing methods with fluids
BS M 77:1994, ISO 11077:1993. Self-propelled de-icing/anti-icing vehicles. Functional requirements
BS M 78:1995, ISO 11078:1994. Aircraft de-icing/anti-icing non-Newtonian fluids, ISO type II
BS M 79:1995, ISO 11241:1994. Specification for aircraft engine transport devices
BS M 80:1995, ISO 6967:1994. Air cargo equipment. Wide body aircraft main deck container/pallet loader. Functional requirements
BS M 81:1995, ISO 6968:1994. Air cargo equipment. Wide body aircraft lower deck container/pallet loader. Functional requirements
BS M 82:1995, ISO 4170:1995. Air cargo equipment. Interline pallet nets
BS M 83:1995, ISO 10254:1995. Glossary for air cargo and ground equipment
BS M 84:1995, ISO 10327:1995. Air cargo equipment. Certified aircraft container for air cargo. Specification and testing
BS M 85:1995, ISO 12118:1995. Air cargo equipment. Identification of double-stud tie-down fittings having an omnidirectional rated load capacity of 22 250 N (5 000 lbf) or above
BS M 87:1996, ISO 10841:1996. Aircraft ground support equipment. Catering vehicle for large capacity aircraft. Functional requirements
BS M 88:1996, ISO 11242:1996. Air cargo equipment. Pressure equalization requirements for cargo containers
BS M 89:1996, ISO 11995:1996. Aircraft ground support equipment. Stability requirements for loading and servicing equipment
BS M 90:1997, ISO 12056:1996. Aircraft ground support equipment. Self-propelled passenger stairs for large capacity aircraft. Functional requirements
BS M 91:1997, ISO 10046:1996. Aircraft. Methodology of calculating cargo compartment volumes
BS M 93:2005. Protection of magnesium-rich alloys against corrosion. Specification
BS MA 10:1971. Specification for oval eyeplates
BS MA 100:1989, ISO 8217:1987. Specification for petroleum fuels for marine oil engines and boilers
BS MA 100:1996, ISO 8217:1996. Specification for petroleum fuels for marine oil engines and boilers
BS MA 101:1986. Specification for toilet retention and recirculation systems for the treatment of toilet waste on small craft
BS MA 102:1986, ISO 7840:1985. Specification for fire resistant fuel hoses for small craft
BS MA 103:1986. Specification for design conditions and basis of calculations for air-conditioning and ventilation of accommodation spaces in ships
BS MA 104-1:1987, ISO 7222-1985. Series 2 shipborne bargesSpecification for main dimensions
BS MA 105-1:1987, ISO 6765-1985. Series 3 shipborne bargesSpecification for main dimensions
BS MA 105-2:1987, ISO 8303-1985. Series 3 shipborne bargesSpecification for main operational and technical requirements
BS MA 105-3:1987, ISO 8304-1984. Series 3 shipborne bargesSpecification for principal mating dimensions for the ventilating system
BS MA 1-1:1969. Specification for graphical symbols representing pipeline systems in ships.General shipboard services
BS MA 11:1971. Specification for horncleats
BS MA 1-2:1969. Specification for graphical symbols representing pipeline systems in ships.Ventilation
BS MA 12-1:1983. Specification for welded steel bollardsVertical type
BS MA 12-2:1983. Specification for welded steel bollardsCruciform type
BS MA 1-3:1969. Specification for graphical symbols representing pipeline systems in ships.Sanitation
BS MA 13:1972. Recommendations for the co-ordination of dimensions in shipbuilding: glossary of terms
BS MA 14:1972. Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating sizes for components and assemblies
BS MA 15:1972. Specification for indication of details on the general arrangement plans of ships
BS MA 16:1971. Specification for inflatable boats (manual or motor propelled)
BS MA 17:1972. Specification for derrick boom clamp
BS MA 18:1973. Specification for salt water piping systems in ships
BS MA 19:1973. Specification for Panama-type fairleads
BS MA 20:1973. Specification for presentation of ships' cargo gear particulars
BS MA 21:1973. Specification for deck-end roller fairleads
BS MA 2-1:1985. Magnetic compasses and binnacles.Specification for class A magnetic compasses, their binnacles and azimuth reading devices (including test procedures)
BS MA 2-2:1969. Magnetic compasses and binnaclesClass B instruments
BS MA 22:1973. Specification for cast roller fairleads
BS MA 2-3:1969. Magnetic compasses and binnaclesRecommendations for the positioning of compasses
BS MA 23:1973. Specification for multi-angle roller fairleads
BS MA 24:1974. Specification for ships's side scuttles
BS MA 2-4:1985. Magnetic compasses and binnacles.Glossary of terms
BS MA 2-5:1972. Specification for magnetic compasses and binnacles.Type testing of compasses and accessories: Classes A and B
BS MA 25:1973. Specification for ships' windows
BS MA 2-6:1972. Specification for magnetic compasses and binnacles.Type testing of binnacles and correcting devices
BS MA 26:1973. Specification for suction strainers
BS MA 2-7:1972. Specification for magnetic compasses and binnacles.Individual testing of magnetic compasses and accessories: Classes A and B
BS MA 27:1974. Specification for sight-flow indicators for tank overflow systems
BS MA 28:1973. Specification for dimensions of tracks for mast and deck fittings
BS MA 2-8:1985. Magnetic compasses and binnaclesSpecification for transmitting systems and off-course alarms for class A magnetic compasses
BS MA 29:1982. Specification for steel wire rope and strand for yachts
BS MA 30:1973. Glossary of terms and graphical symbols for ships' deck machinery
BS MA 31:1973. Specification for ships' deck machinery - cargo winches
BS MA 32:1973. Specification for ships' deck machinery - mooring winches
BS MA 33:1973. Specification for ships' deck machinery - warping winches
BS MA 34:1973. Specification for ships' deck machinery - capstans
BS MA 35:1975. Specification for ships' deck machinery - windlasses
BS MA 36:1974. Specification for ships' deck machinery - topping winches
BS MA 37:1973. Specification for external doors (wood) for ships
BS MA 38:1973. Specification for weathertight and spraytight doors (steel)
BS MA 39-1:1973. Specification for ships' laddersLadders, steel vertical
BS MA 39-2:1973. Specification for ships' laddersLadders, steel sloping
BS MA 39-3:1973. Specification for ships' laddersLadders, steel dog-step
BS MA 39-4:1975. Specification for ships' ladders.Ladders, wood sloping, exterior
BS MA 40-1:1975. Specification for marine guardrails, stanchions, etcGuardrails for merchant ships (excluding passenger ships)
BS MA 40-2:1975. Specification for marine guardrails, stanchions, etcGates and portable guardrail sections for merchant ships (excluding passenger ships)
BS MA 40-3:1975. Specification for marine guardrails, stanchions, etcStorm rails (exterior)
BS MA 41:1975. Specification for two tonne general purpose davits
BS MA 42:1975. Specification for ships' awnings and supports
BS MA 44:1974. Recommendations for the co-ordination of dimensions in shipbuilding: principles of dimensional co-ordination
BS MA 45:1974. Recommendations for the co-ordination of dimensions in shipbuilding: controlling dimensions
BS MA 46:1973. Specification for cast iron mudboxes
BS MA 47:1977. Code of practice for ships' cargo blocks
BS MA 48:1976. Code of practice for design and operation of ships' derrick rigs
BS MA 49:1986. Summary and application of carbon steel tubes for marine pipework systems
BS MA 5:1970. Specification for brass service nameplates for valves
BS MA 52:1974. Specification for ships' deck machinery - accommodation ladder winches
BS MA 53:1975. Specification for ships' deck machinery - towing winches for deep sea use
BS MA 54:1975. Specification for ships' deck machinery - trawl winches
BS MA 55:1975. Specification for ships' deck machinery - lifeboat winches
BS MA 56:1974. Specification for ships' deck machinery - anchor cable stoppers
BS MA 57:1975. Specification for ships' deck machinery - rope storage reels
BS MA 58:1974. Specification for fork and pin connections between yacht standing rigging and mast or deck
BS MA 59:1974. Specification for sea tubes
BS MA 6:1970. Specification for internal doors and frames
BS MA 60:1974. Specification for copper and copper alloy tubes for marine pipework systems
BS MA 60:1986. Summary and application of copper and copper alloy tubes for ships' pipework systems
BS MA 61:1974. Specification for bilge drain and suction hats
BS MA 62:1974. Specification for weed grids for sea inlets
BS MA 69:1976. Specification. Ventilator heads
BS MA 7:1983. Specification for manholes with bolted covers
BS MA 70-1:1975. Specification for dimensions of anchor chain cables.Stud-link anchor chain cables
BS MA 71:1977. Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating spaces for internal subdivision
BS MA 72:1976. Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating spaces for furniture
BS MA 73:1976. Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating sizes for fixtures, fittings and equipment
BS MA 74-1:1976. Tapers and other outboard details of propeller shafts.Specification for shafts of diameter from 16 mm to 160 mm
BS MA 74-2:1981. Tapers and other outboard details of propeller shafts.Specification for shafts of diameter greater than 160 mm up to 1000 mm
BS MA 75-1:1985. Specification for bulkhead pieces and tank padsBulkhead pieces of fabricated steel or copper alloy and steel pad pieces
BS MA 75-2:1978. Specification for bulkhead pieces and tank pads.Bulkhead pieces of ductile iron (spheroidal graphite iron)
BS MA 77:1976. Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating sizes for services
BS MA 78:1978. Specification for aluminium shore gangways
BS MA 79:1978. Specification for jib cranes: ship mounted type
BS MA 8:1983. Specification for small weathertight hatches
BS MA 81:1980. Specification for ships' derrick fittings
BS MA 82:1978, ISO 5483-1977. Specification for shipbuilding - oil and water drain screws
BS MA 84:1978, ISO 4567-1978. Specification for shipbuilding - yachts - waste water fittings
BS MA 85:1979, ISO 5620-1978. Specification for shipbuilding - filling connection for drinking water tanks on ships
BS MA 86:1979, ISO 3715-1978. Glossary of terms used in shipbuilding: list of equivalent terms for ship screw propellers
BS MA 87-1:1980, ISO 4175-1979. Series 1 shipborne bargesSpecification for main dimensions
BS MA 87-2:1985, ISO 7221-1984. Series 1 shipborne bargesSpecification for principal technical requirements
BS MA 87-3:1987, ISO 6764-1985. Series 1 shipborne bargesSpecification for the arrangement, dimensions and method of test for lifting post castings
BS MA 88:1980, ISO 3434-1975. Specification for heated glass panes for ships' windows
BS MA 89:1980, ISO 5488-1979. Specification for accommodation ladders
BS MA 9:1970. Flanges, bolting and gaskets for exhaust gas, piping for diesel engines and boiler uptakes
BS MA 90:1980, ISO 5489:1979. Specification for embarkation ladders
BS MA 91-1:1981. CanoesCode of practice for canoe construction
BS MA 91-2:1981. CanoesSpecification for safety features of canoes
BS MA 92:1981, ISO 799-1980. Specification for pilot ladders
BS MA 93:1981. Code of practice for structural safety of deck machinery installation
BS MA 94:1981. Specification for thermal insulation for marine piping systems
BS MA 97:1984, ISO 6812-1983. Specification for roll on/roll off ship-to-shore connection: interface between terminals and ships with straight stern/bow ramps
BS MA 98-1:1985, ISO 7607-1984. Multi-bucket dredgersSpecification for scale of bucket capacities
BS MA 99-1:1985, ISO 6766-1984. Series 4 shipborne bargesSpecification for main dimensions
BS N 1:1969. Specification for oxygen masks for use in demand systems
BS N 2:1972. Specification for requirements for chemical oxygen generators for aircraft
BS N 3:1973. Specification for gaseous breathing oxygen supplies
BS N 4:1974. Specification for full face mask assemblies for use in contaminated atmospheres
BS N 5:1992. Specification for crew portable protective breathing equipment for use during aircraft emergencies
BS N 6:1998. Specification for aeromedical portable oxygen concentrator systems. General requirements
BS OHSAS 18001:2007 (Paperback). Occupational health and safety management systems. Requirements
BS OHSAS 18001:2007. Occupational health and safety management systems. Requirements
BS OHSAS 18002:2008. Occupational health and safety management systems. Guidelines for the implementation of OHSAS 18001:2007
BS PL 4:2005. Properties of unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites. Specification
BS PL 5:2005. Unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites. Test methods
BS PL 6:2005. Properties of unsaturated polyester resins for low pressure laminating of glass fibre reinforced composites. Specification
BS PL 7:2005. Unsaturated polyester resins for low pressure laminating of glass fibre reinforced laminates. Test methods
BS PL 8:2005. Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks. Specification
BS PL 9:2005. Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks. Test methods
BS QC 001002:1991. Rules of procedure of the IEC quality assessment system for electronic components (IECQ)
BS QC 001002-2:1997. Rules of procedure of the IEC quality assessment system for electronic components (IECQ)Documentation, including a new clause on regulations for technology approval schedules
BS QC 001002-3:1997. Rules of procedure of the IEC quality assessment system for electronic components (IECQ)Approval procedures, including a new clause on technology approval
BS QC 001005:1993. IECQ Register of Approvals
BS QC 030000:1993, IEC 60807-1:1991. Harmonized system of quality assessment for electronic components. Rectangular connectors for frequencies below 3 MHz. Generic specification. General requirements and guide for the preparation of detail specifications for connectors with assessed quality
BS QC 160000-1:1987, IEC 60255-7:1978. Harmonized system of quality assessment for electronic components. Electrical relays. Generic specification: electromechanical all-or-nothing relaysTest and measurement procedures
BS QC 160000-2:1987, IEC 60255-10:1979. Harmonized system of quality assessment for electronic components. Electrical relays. Generic specification: electromechanical all-or-nothing relaysQuality assessment procedures
BS QC 160100:1987, IEC 60255-19:1983. Harmonized system of quality assessment for electronic components. Electrical relays. Sectional specification: electromechanical all-or-nothing relays
BS QC 160101:1987, IEC 60255-19-1:1983. Specification for harmonized system of quality assessment for electronic components. Electrical relays. Blank detail specification. Electromechanical all-or-nothing relays. Test schedules 1, 2 and 3
BS QC 200012:1996, CECC 200012:1996. Process assessment schedule for printed board design facilities
BS QC 210000:1996. Technology approval schedules. Requirements under the IEC Quality Assessment System for Electronic Components (IECQ)
BS QC 221100:1997, IEC 60169-15:1979. Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with screw coupling. Characteristic impedance 50 ohms (Type SMA)
BS QC 221200:1997, IEC 60169-8:1978. Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock. Characteristic impedance 50 ohms (Type BNC)
BS QC 221300:1997, IEC 60169-10:1983. Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling. Characteristic impedance 50 ohms (Type SMB)
BS QC 221400:1997, IEC 60169-9:1978. Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with screw coupling. Characteristic impedance 50 ohms (Type SMC)
BS QC 222000:1996, IEC 60169-17:1980. Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with screw coupling. Characteristic impedance 50 ohms. (Type TNC)
BS QC 222100:1997, IEC 60169-16:1982. Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling. Characteristic impedance 50 ohms (75 ohms) (Type N)
BS QC 222400:1997, IEC 60169-13:1976. Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 5,6 mm (0,22 in). Characteristic impedance 75 ohms (type 1,6/5,6). Characteristic impedance 50 ohms (type 1,8/5,6) with similar mating dimensions
BS QC 300000:1983, IEC 60384-1:1982. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Generic specification
BS QC 300100:1991, IEC 60384-1:1988. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification: fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors
BS QC 300101:1993, IEC 60384-11-1:1988. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors. Assessment level E
BS QC 300200:1983, IEC 60384-15:1982,QC 300200:1982. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification: fixed tantalum capacitors with solid or non-solid electrolyte
BS QC 300201:1985, IEC 60384-15-3:1984,QC 300201. Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed tantalum capacitors with solid electrolyte and porous anode. Assessment level E
BS QC 300202:1985, IEC 60384-15-2:1984,QC 300202. Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed tantalum capacitors with non-solid electrolyte and porous anode. Assessment level E
BS QC 300203:1985, IEC 60384-15-1,QC 300203. Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed tantalum capacitors with non-solid electrolyte and foil electrode. Assessment level E
BS QC 300300:1998, IEC 60384-4:1998. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification: aluminium electrolytic capacitors with solid and non-solid electrolyte
BS QC 300301:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed capacitors for use in electronic equipment. Aluminium electrolytic capacitors with non-solid electrolyte. Assessment level E
BS QC 300400:1983, IEC 60384-2:1982,QC 300400:1982. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification: fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
BS QC 300401:1984, IEC 60384-2-1:1982,QC 300401. Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed metallized polyethylene terephthalate film dielectric d.c. capacitors. Assessment level E
BS QC 300500:1989, IEC 60384-6:1987. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification: fixed metallized polycarbonate film dielectric d.c. capacitors
BS QC 300501:1990, IEC 60384-6-1:1987. Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed metallized polycarbonate film dielectric d.c. capacitors. Assessment level E
BS QC 300600:1991, IEC 60384-8:1988. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification for fixed capacitors of ceramic dielectric, class 1
BS QC 300601:1993, IEC 60384-8-1:1988. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed capacitors of ceramic dielectric, class 1. Assessment level E
BS QC 300700:1992, IEC 60384-9:1988. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification for fixed capacitors of ceramic dielectric, class 2
BS QC 300701:1993, IEC 60384-9-1:1988. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed capacitors of ceramic dielectric, class 2. Assessment level E
BS QC 300800:1991, IEC 60384-3:1989. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification for fixed tantalum chip capacitors
BS QC 300801:1993. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed tantalum chip capacitors. Assessment level E
BS QC 300900:1991, IEC 60384-7:1991. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification: fixed polystyrene film dielectric metal foil d.c. capacitors
BS QC 300901:1992, IEC 60384-7-1:1991. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed polystyrene film dielectric metal foil d.c. capacitors. Assessment level E
BS QC 301200:1983, IEC 60384-16:1982,QC 301200:1982. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification: fixed metallized polypropylene film dielectric d.c. capacitors
BS QC 301201:1984, IEC 60384-16-1:1982,QC 301201. Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed metallized polypropylene film dielectric d.c. capacitors. Assessment level E
BS QC 301300:1989, IEC 60384-17:1987. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification: fixed metallized polypropylene film dielectric a.c. and pulse capacitors
BS QC 301301:1990, IEC 60384-17-1:1987. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed metallized polypropylene film dielectric a.c. and pulse capacitors. Assessment level E
BS QC 301700:1992, IEC 60384-12:1988. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification for fixed polycarbonate film dielectric metal foil d.c. capacitors
BS QC 301701:1992, IEC 60384-12-1:1988. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed polycarbonate film dielectric metal foil d.c. capacitors. Assessment level E
BS QC 301800:1991, IEC 60384-13:1991. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification for fixed polypropylene film dielectric metal foil d.c. capacitors
BS QC 301801:1993, IEC 60384-13-1:1991. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed polypropylene film dielectric metal foil d.c. capacitors. Assessment level E
BS QC 301900:1992, IEC 60384-10:1989. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification for fixed multilayer ceramic chip capacitors
BS QC 301901:1992. Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed multilayer ceramic chip capacitors. Assessment level E
BS QC 390000:1992, IEC 61045-1:1991. Harmonized system of quality assessment for electronic components. Fixed film resistor networks for use in electronic equipment. Generic specification
BS QC 390100:1992, IEC 61045-2:1991. Harmonized system of quality assessment for electronic components. Fixed film resistor networks for use in electronic equipment. Sectional specification for film resistor networks of assessed quality on the basis of the capability approval procedure
BS QC 390101:1992. Fixed film resistor networks for use in electronic equipment. Blank detail specification for film resistor networks of assessed quality on the basis of the capability approval procedure. Assessment level E
BS QC 400000:1990, IEC 60115-1:1982. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment: generic specification
BS QC 400102:1992, IEC 60115-2-2:1992. Specification for harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Blank detail specification. Fixed low-power non-wirewound resistors. Assessment level F
BS QC 400200:1993, IEC 60115-4:1982,QC 400200:1982. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Sectional specification: fixed power resistors
BS QC 400201:1993, IEC 60115-4-1:1983,QC 400201. Specification for harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Blank detail specification: fixed power resistors. Assessment level E
BS QC 400202:1992, IEC 60115-4-2:1992. Specification for harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Blank detail specification. Fixed power resistors. Assessment level F
BS QC 400203:1993, IEC 60115-4-3:1993. Specification for fixed resistors for use in electronic equipment. Blank detail specification. Fixed power resistors, heat-sink types. Assessment level H
BS QC 400302:1992, IEC 60115-5-2:1992. Specification for harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Blank detail specification. Fixed precision resistors. Assessment level F
BS QC 400600:1990, IEC 60115-8:1989. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Sectional specification: fixed surface mounting (chip) resistors
BS QC 410000:1990, IEC 60393-1:1989. Harmonized system of quality assessment for electronic components: potentiometers for use in electronic equipment
BS QC 410100:1990, IEC 60393-2:1989,QC 410100. Harmonized system of quality assessment for electronic components. Potentiometers for use in electronic equipment. Sectional specification: lead screw actuated and rotary preset potentiometers
BS QC 410101:1990. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Load screw actuated and rotary preset potentiometers. Assessment level E
BS QC 410102:1992. Specification for harmonized system of quality assessment for electronic components. Potentiometers for use in electronic equipment. Blank detail specification: lead-screw actuated and rotary preset potentiometers. Assessment level F
BS QC 410200:1992, IEC 60393-4:1992. Harmonized system of quality assessment for electronic components. Potentiometers for use in electronic equipment. Sectional specification for single-turn rotary power potentiometers
BS QC 410203:1992. Specification for harmonized system of quality assessment for electronic components. Potentiometers for use in electronic equipment. Blank detail specification: single-turn rotary power potentiometers. Assessment level E
BS QC 410204:1992. Specification for harmonized system of quality assessment for electronic components. Potentiometers for use in electronic equipment. Blank detail specification: single-turn rotary power potentiometers. Assessment level F
BS QC 410300:1992, IEC 60393-5:1992. Harmonized system of quality assessment for electronic components. Potentiometers for use in electronic equipment. Sectional specification for single-turn rotary low-power wirewound and non-wirewound potentiometers
BS QC 410301:1992. Specification for harmonized system of quality assessment for electronic components. Potentiometers for use in electronic equipment. Blank detail specification: single-turn rotary low-power potentiometers. Assessment level E
BS QC 410302:1992. Specification for harmonized system of quality assessment for electronic components. Potentiometers for use in electronic equipment. Blank detail specification: single-turn rotary low-power potentiometers. Assessment level F
BS QC 410400:1992, IEC 60393-3:1992. Harmonized system of quality assessment for electronic components. Potentiometers for use in electronic equipment. Sectional specification for rotary precision potentiometers
BS QC 410402:1992. Specification for harmonized system of quality assessment for electronic components. Potentiometers for use in electronic equipment. Blank detail specification: rotary precision potentiometers. Assessment level E
BS QC 420000:1992, IEC 61051-1:1992. Harmonized system of quality assessment for electronic components. Varistors for use in electronic equipment: generic specification
BS QC 720100:1991. Harmonized system of quality assessment for electronic components. Semiconductor devices. Sectional specification for optoelectronic devices
BS QC 720102:1997, IEC 60747-12-2:1995. Blank detail specification for laser diode modules with pigtail for fibre optic systems and subsystems
BS QC 720104:1997, IEC 60747-12-4:1997. Harmonized system of quality assessment for electronic components. Semiconductor devices. Optoelectronic devices. Blank detail specification for pin-FET modules with/without pigtail, for fibre optic systems or subsystems
BS QC 720105:1997, IEC 60747-12-5:1997. Harmonized system of quality assessment for electronic components. Semiconductor devices. Optoelectronic devices. Blank detail specification for pin-photodiodes with/without pigtail, for fibre optic systems or subsystems
BS QC 720106:1997, IEC 60747-12-6:1997. Harmonized system of quality assessment for electronic components. Semiconductor devices. Optoelectronic devices. Blank detail specification for avalanche photodiodes (APDs) with/without pigtail, for fibre optic systems or subsystems
BS QC 750001:1986, IEC 60747-3-1:1986. Specification for harmonized system of quality assessment for electronic components. Semiconductor discrete devices. Blank detail specification. Signal diodes, switching diodes and controlled avalanche diodes
BS QC 750005:1987, IEC 60747-3-2:1986. Specification for harmonized system of quality assessment for electronic components. Semiconductor discrete devices. Blank detail specification. Voltage-regulator diodes and voltage-reference diodes, excluding temperature-compensated precision reference diodes
BS QC 750100:1986+A2:1996, IEC 60747-11:1985. Harmonized system of quality assessment for electronic components. Discrete semiconductor devices. Sectional specification
BS QC 750102:1990, IEC 60747-7-1:1989. Specification for harmonized system of quality assessment for electronic components. Semiconductor discrete devices. Blank detail specification. Ambient-rated bipolar transistors for low and high-frequency amplification
BS QC 750103:1990, IEC 60747-7-2:1989. Specification for harmonized system of quality assessment for electronic components. Semiconductor discrete devices. Blank detail specification. Case-rated bipolar transistors for low-frequency amplification
BS QC 750104:1991. Specification for harmonized system of quality assessment for electronic components. Semiconductor discrete devices. Blank detail specification. Bipolar transistors for switching applications
BS QC 750106:1993, IEC 60747-8-2:1993. Specification for harmonized system of quality assessment for electronic components. Semiconductor discrete devices. Blank detail specification. Field-effect transistors for case-rated power amplifier applications
BS QC 750107:1991. Specification for harmonized system of quality assessment for electronic components. Semiconductor discrete devices. Blank detail specification. Case-rated bipolar transistors for high-frequency amplifications
BS QC 750108:1990, IEC 60747-2-1:1989. Specification for harmonized system of quality assessment for electronic components. Semiconductor discrete devices. Blank detail specification. Rectifier diodes (including avalanche rectifier diodes), ambient and case-rated, up to 100 A
BS QC 750109:1993, IEC 60747-2-2:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Rectifier diodes (including avalanche rectifier diodes), ambient and case-rated, for currents greater than 100 A
BS QC 750110:1990, IEC 60747-6-1:1989. Specification for harmonized system of quality assessment for electronic components. Semiconductor discrete devices. Blank detail specification. Reverse blocking triode thyristors, ambient and case-rated, up to 100 A
BS QC 750111:1991. Specification for harmonized system of quality assessment for electronic components. Semiconductor discrete devices. Blank detail specification. Bidirectional triode thyristors (triacs), ambient or case-rated, up to 100 A
BS QC 750112:1988, IEC 60747-8-1:1987. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Semiconductor devices. Discrete devices. Field-effect transistors. Blank detail specification for single-gate field-effect transistors, up to 5 W and 1 GHz
BS QC 750113:1994. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: reverse blocking triode thyristors, ambient and case-rated, for currents greater than 100 A
BS QC 750114:1996, IEC 60747-8-3:1995. Harmonized system of quality assessment for electronic components. Semiconductor devices. Discrete devices. Field-effect transistors. Blank detail specification for case-rated field-effect transistors for switching applications
BS QC 760000:1990, IEC 60748-20:1988. Harmonized system of quality assessment for electronic components. Film and hybrid film integrated circuits. Generic specification
BS QC 760001:1994, IEC 60748-20-1:1994. Harmonized system of quality assessment for electronic components. Film and hybrid integrated circuits. Generic specification. Requirements for internal visual inspection
BS QC 760100:1991, IEC 60748-21:1991. Harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Sectional specification for film and hybrid integrated circuits: qualification approval
BS QC 760100:1997, IEC 60748-21:1997. Harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Sectional specification for film integrated circuits and hybrid film integrated circuits on the basis of the qualification approval procedures
BS QC 760101:1992. Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Blank detail specification. Film and hybrid integrated circuits: qualification approval procedure
BS QC 760101:1997, IEC 60748-21-1:1997. Harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Blank detail specification for film integrated circuits and hybrid film integrated circuits on the basis of qualification approval procedures
BS QC 760200:1992, IEC 60748-22:1992. Harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Sectional specification for film integrated circuits and hybrid film integrated circuits: capability approval
BS QC 760200:1997, IEC 60748-22:1997. Harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Sectional specification for film integrated circuits and hybrid film integrated circuits on the basis of the capability approval procedures
BS QC 760201:1992, IEC 60748-22-1:1991. Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Blank detail specification. Film and hybrid integrated circuits: capability approval
BS QC 760201:1997, IEC 60748-22-1:1997. Harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Blank detail specification for film integrated circuits and hybrid film integrated circuits on the basis of the capability approval procedures
BS QC 790101:1992, IEC 60748-11-1:1992. Harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Sectional specification for semiconductor integrated circuits excluding hybrid circuits. Internal visual examination for semiconductor integrated circuits excluding hybrid circuits
BS QC 790104:1992. Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Family specification. Complementary MOS digital integrated circuits, series 4000 B and 4000 UB
BS QC 790105:1993, IEC 60748-2-7:1992. Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Blank detail specification. Integrated circuit fusible-link programmable bipolar read-only memories
BS QC 790106:1995, IEC 60748-2-9:1994. Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Digital integrated circuits. Blank detail specification. MOS ultraviolet light erasable electrically programmable read-only memories
BS QC 790107:1995, IEC 60748-2-10:1994. Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Digital integrated circuits. Blank detail specification. Integrated circuit dynamic read/write memories
BS QC 790109:1992. Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Family specification for HCMOS digital integrated circuits series 54/74 HC, 54/74 HCT, 54/74 HCU.
BS QC 790110:1992. Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Blank detail specification. Microprocessor integrated circuits.
BS QC 790111:1993, IEC 60748-2-8:1993. Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Blank detail specification: integrated circuit static read/write memories
BS QC 790130:1992. Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Blank detail specification. HCMOS digital integrated circuits (series 54/74 HC, 54/74 HCT, 54/74 HCU)
BS QC 790131:1992. Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Blank detail specification. Complementary MOS digital integrated circuits (series 4000 B and 4000 UB)
BS QC 790132:1992. Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Blank detail specification. Bipolar monolithic digital integrated circuit gates (excluding uncommitted logic arrays)
BS QC 790202:1991. Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Blank detail specification. Monolithic integrated operational amplifiers
BS QC 790303:1994, IEC 60748-4-1:1993. Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Blank detail specification. Linear digital-to-analogue converters (DAC)
BS QC 790304:1994, IEC 60748-4-2:1993. Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Blank detail specification. Linear analogue-to-digital converters (ADC)
BS QC 960000:1992, IEC 61020-1:1991. Harmonized system of quality assessment for electronic components. Electromechanical switches for use in electronic equipment. Generic specification
BS QC 960100:1992, IEC 61020-2:1991. Harmonized system of quality assessment for electronic components. Electromechanical switches for use in electronic equipment. Sectional specification for rotary switches
BS QC 960101:1992. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: electromechanical switches for use in electronic equipment. Blank detail specification for rotary switches
BS QC 960200:1992, IEC 61020-4:1991. Harmonized system of quality assessment for electronic components. Electromechanical switches for use in electronic equipment. Sectional specification for lever (toggle) switches
BS QC 960201:1992, IEC 61020-4-1:1991. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: electromechanical switches for use in electronic equipment. Blank detail specification for lever (toggle) switches
BS QC 960300:1992, IEC 61020-6:1991. Harmonized system of quality assessment for electronic components. Electromechanical switches for use in electronic equipment. Sectional specification for sensitive switches
BS QC 960301:1992. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: electromechanical switches for use in electronic equipment. Blank detail specification for sensitive switches
BS QC 960400:1992, IEC 61020-5:1991. Harmonized system of quality assessment for electronic components. Electromechanical switches for use in electronic equipment. Sectional specification for pushbutton switches
BS QC 960401:1992. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: electromechanical switches for use in electronic equipment. Blank detail specification for pushbutton switches
BS QC 960500:1992, IEC 61020-3:1991. Harmonized system of quality assessment for electronic components. Electromechanical switches for use in electronic equipment. Sectional specification for in-line package switches
BS QC 960501:1992. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: electromechanical switches for use in electronic equipment. Blank detail specification for in-line package switches
BS S 125:1964. Specification for aircraft material. 23/14 chromium-nickel heat-resisting steel (titanium stabilized) (35 tonf/sq in: limiting ruling section 6 in)
BS S 126:1964. Specification for aircraft material. 23/14 chromium-nickel heat-resisting steel (niobium stabilized) (35 tonf/sq in: limiting ruling section 6 in)
BS S 127:1964. Specification for aircraft material. 24/17 chromium-nickel heat-resisting steel (titanium stabilized) (35 tonf/sq in: limiting ruling section 6 in)
BS S 128:1964. Specification for aircraft material. 24/17 chromium-nickel heat-resisting steel (niobium stabilized) (35 tonf/sq in: limiting ruling section 6 in)
BS S 133:1965. Specification for aircraft material. ¾ per cent nickel-chromium case-hardening steel
BS S 134:1965. Specification for aircraft material. 3 per cent chromium-molybdenum-vanadium steel (air hardening) (100 tonf/sq in: limiting ruling section 1⅛ inches)
BS S 148:1969. Specification for low nickel-chromium steel (bar for the manufacture of forged bolts only)
BS S 150:1975. Specification for chromium-molybdenum-vanadium-niobium heat-resisting steel billets, bars, forgings and parts (930-1080 MPa) (Cr 10.5, Mo 0.6, V 0.2, Nb 0.3)
BS S 151:1975. Specification for chromium-nickel-molybdenum-vanadium heat-resisting steel billets, bars, forgings and parts (930-1130 MPa: limiting ruling section 150 mm) (Cr 12, Ni 2.5, Mo 1.7, V 0.3)
BS S 152:1975. Specification for chromium-cobalt-molybdenum-vanadium-niobium heat-resisting steel billets, bars, forgings and parts (consumable electrode remelted) (1000-1140 MPa) (Cr 10.5, Co 6, Mo 0.8, V 0.2, Nb 0.3)
BS S 153:1976. Specification. 2½% nickel-chromium-molybdenum steel billets, bars, forgings and parts (1230-1430 MPa: limiting ruling section 40 mm)
BS S 154:1976. Specification. 2½% nickel-chromium-molybdenum steel billets, bars, forgings and parts (880-1080 MPa: limiting ruling section 150 mm)
BS S 155:1976. Specification for nickel-silicon-chromium-molybdenum-vanadium steel (vacuum arc remelted) billets, bars, forgings and parts (1900-2100 MPa: limiting ruling section 75 mm)
BS S 156:1976. Specification for 4% nickel-chromium-molybdenum case-hardening steel (vacuum arc remelted) billets, bars, forgings and parts (1320-1520 MPa)
BS S 157:1976. Specification. 3% nickel-chromium-molybdenum case-hardening steel billets, bars, forgings and parts (1180-1380 MPa)
BS S 158:1977. Specification for 1% chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
BS S 159:1981. Specification for 12% chromium-nickel-molybdenum-vanadium heat-resisting steel bars for the manufacture of fasteners (1100-1300 MPa: limiting ruling section 50 mm)
BS S 160:1990. Specification for chromium-nickel corrosion-resisting steel - bright bars and parts (540 MPa, limiting ruling section 160 mm) (Cr 18, Ni 10.5, controlled nitrogen content)
BS S 161:1990. Specification for chromium-nickel-molybdenum corrosion-resisting steel. Bright bars and parts (540 MPa, limiting ruling section 160 mm) (Cr 17.5, Ni 12.5, Mo 2.25, controlled nitrogen content)
BS S 162:1990. Specification for 18% nickel-cobalt-molybdenum maraging steel forging stock, forgings, bars and parts (1800 MPa: double vaccuum melted)
BS S 163:1990. Specification for nickel-chromium-molybdenum-vanadium steel forging stock, forgings, bars and parts (1900 MPa:limiting ruling section 100 mm)
BS S 164:2002. 1 % Chromium-molybdenum steel billets, bars, forgings and parts. (1150 to 1300 MPa: Limiting ruling section 16 mm) (Suitable for welding)
BS S 201:1967. Specification for patented cold drawn carbon steel wire and springs (high duty unground wire)
BS S 202:1967. Specification for patented cold drawn carbon steel wire and springs (high duty ground wire)
BS S 203:1967. Specification for carbon steel wire and springs (high duty unground wire - hardened and tempered)
BS S 204:1967. Specification for chromium-vanadium steel wire and springs (high duty ground wire - hardened and tempered)
BS S 205:1969. Specification for austenitic chromium-nickel steel wire and springs
BS S 206:1999. Chromium-nickel-aluminium corrosion resisting steel (precipitation hardening) rod, cold drawn wire and springs
BS S 524:1969+A4:2013. Specification for cold-rolled 18/10 chromium-nickel corrosion-resisting steel sheet and strip (titanium stabilized: 800MPa)
BS S 525:1969+A4:2013. Specification for cold-rolled 18/10 chromium-nickel corrosion-resisting steel sheet and strip (niobium stabilized: 800 MPa)
BS S 526:1969+A3:2013. Specification for softened 18/10 chromium-nickel corrosion-resisting steel sheet and strip (titanium stabilized: 540 MPa)
BS S 527:1969+A3:2013. Specification for softened 18/10 chromium-nickel corrosion-resisting steel sheet and strip (niobium stabilized: 540 MPa)
BS S 528:1970. Specification for 23/14 chromium-nickel heat-resisting steel sheet and strip (titanium stabilized: 54 hbar) (elevated temperature properties not verified)
BS S 529:1970. Specification for 23/14 chromium-nickel heat-resisting steel sheet and strip (niobium stabilized: 54 hbar) (elevated temperature properties not verified)
BS S 530:1970+A2:2013. Specification for 24/17 chromium-nickel heat-resisting steel sheet and strip (titanium stabilized: 540 MPa) (elevated temperature properties not verified)
BS S 531:1970. Specification for 24/17 chromium-nickel heat-resisting steel sheet and strip (niobium stabilized: 54 hbar) (elevated temperature properties not verified)
BS S 532:1969. Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel sheet and strip (precipitation hardening: 980/1180 MPa)
BS S 533:1969. Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel sheet and strip (precipitation hardening: 1180/1370 MPa)
BS S 534:1969. Specification for chromium-molybdenum steel sheet and strip (880/1080 MPa (suitable for welding)
BS S 535:1969. Specification for chromium-molybdenum steel sheet and strip (1150/1300 Mpa) (suitable for welding)
BS S 536:1970+A2:2013. Specification for low carbon 18/10 chromium-nickel corrosion-resisting steel sheet and strip (500 MPa)
BS S 537:1970+A2:2013. Specification for low carbon 17/12 chromium-nickel-molybdenum corrosion-resisting steel sheet and strip (500 MPa)
BS S 538:1975. Specification for chromium-nickel-molybdenum-vanadium heat-resisting steel sheet and strip (930-1130 MPa: maximum thickness 6 mm) (Cr 12, Ni 2.5, Mo 1.7, V 0.3)
BS SP 10 & 11:1949+A3:2011. Specification for washers for aircraft purposes (primarily for facing purposes)
BS SP 107-112:1954+A5:2012. Specifications for tab washers for unified hexagons for aircraft
BS SP 113:1954. Specification for cadmium plated close tolerance shear pins for aircraft
BS SP 114:1955+A5:2013. Specification for Eye bolts (unified threads) for aircraft
BS SP 115 to 117:1956. Specifications for hydraulic surface-check type lubricating nipples for aircraft
BS SP 118:1958. Tie rods (Unified threads) for aircraft
BS SP 119-120:1957+A2:2012. High tensile steel fork joints (Unified threads). For aircraft
BS SP 121:1958. Collars for shear pins for aircraft
BS SP 122 to 125:1958+A2:2011. Washers for unified hexagons for aircraft (primarily for packing purposes)
BS SP 126 & 127:1959+A3:2011. Washers for unified hexagons for aircraft (primarily for facing purposes)
BS SP 128 to 133:1965. Specifications for wood screws for aircraft
BS SP 13; 14; 15 and 16:1949+A4:2011. Specification for washers for aircraft purposes. (primarily for packing purposes)
BS SP 134 to SP 138:1968+A1:2012. Specification for Copper beryllium crinkle washers
BS SP 139 and SP 140:1969+A2:2012. Specification for Corrosion-resisting steel crinkle washers
BS SP 141:1970. Specification for design and performance requirements for toggle type panel fasteners
BS SP 142-143:1973+A3:2013. Specification for solid rivets with 100° countersunk truncated radiused head made from BS L 86 (SP 142) and BS L 37 (SP 143) materials
BS SP 144-147:1971. Specification for corrosion resisting worm drive clamps for aircraft
BS SP 164:1978. Specification for design and performance requirements for turnlock, stud-type panel fasteners (metric series)
BS SP 166:1982. Specification for spring retaining rings for aerospace application: carbon steel circlips (metric series)
BS SP 172:1999, ISO 9418:1998. Rivets, solid, in aluminium or aluminium alloys. Procurement specification
BS SP 18 and 19:1949. Specification for washers for aircraft purposes (primarily for use with timber)
BS SP 21:1950. Specification for lubricating nipples for aircraft purposes
BS SP 22-27:1950+A2: 2011. Specification for B.A. Washers. For aircraft purposes (primarily for instrument use)
BS SP 28 and 29:1951. Specifications for solid taper pins for aeronautical purposesSpecifications for solid taper pins for aeronautical purposes
BS SP 31 and 32:1951. Specifications for split taper pins for aeronautical purposes
BS SP 33-39:1951+A4:2012. Specifications for turnbarrels, tension rods and swaged cable-end connections for aircraft
BS SP 41-46:1951+A5:2012. Specifications for tab washers for B.A. and B.S.W. hexagons for aircraft
BS SP 49 and BS SP 50:1953+A1:2012. Specifications for Ball ends for swaging on cable. For aircraft (Suitable for 5 cwt. cable)
BS SP 51 and 52:1953+A3:2012. Specifications for Identification tags for swaged cable-end assemblies. For aircraft
BS SP 53:1953. Specification for swaged cable-end assemblies (B.A. and B.S.F. threads) for preformed steel wire rope for aircraft (suitable for use with British Standard W.9 wire rope)
BS SP 54:1953. Specification for swaged cable-end assemblies (B.A. and B.S.F. threads) for preformed non-corrodible steel wire rope for aircraft (suitable for use with British Standard W.11 wire rope)
BS SP 55 and SP 56:1953. Specifications for double coil spring washers for aircraft
BS SP 57 and 58:1955+A3:2011. Specifications for Rivet burrs for aircraft
BS SP 59 and SP 60:1955+A1:2012. Specifications for Spring catches for aeronautical purposes
BS SP 65:1955. Specification for aluminium alloy taper pins for aeronautical purposes
BS SP 66 and 67:1955+A2:2012. Specifications for Cable thimbles for aircraft
BS SP 72:1957. Braided rubber cord assemblies for aircraft
BS SP 76:1958. Snap head steel rivets for aircraft
BS SP 8:1939+A7:2012. Specification for turnbuckles (tension rod type) for aircraft purposes
BS SP 86:1959. 100° countersunk head steel rivets for aircraft
BS SP 90:1961. Specification for corrosion-resisting steel split cotter pins for aircraft
BS SP 94:1964+A2:2012. Specification for bronze oil-retaining bushes and thrust washers. For aircraft
BS T 72-T 73:1977. Specifications for 18/10 chromium-nickel corrosion-resisting steel tube for hydraulic purposes (niobium/titanium stabilized: 550 MPa)
BS T 76:1978. Specification for chromium-molybdenum steel tube (770 MPa) (weldable)
BS T 77:1980. Specification for chromium-molybdenum steel tube (900 MPa) (weldable)
BS T 78:1997+A1:2013. Specification for 2½ % nickel-chromium-molybdenum steel tubes (1390Mpa)
BS T 79:1997+A1:2013. Specification for 2 ½% nickel-chromium-molybdenum steel tubes (1160 MPa)
BS T 80:1997+A1:2013. Specification for 12 % chromium corrosion-resisting steel tubes (770 MPa)
BS TA 56:1974. Specification for plate of titanium-aluminium-vanadium alloy (tensile strength 895-1150 MPa) (maximum thickness 100 mm)
BS TA 57:1974. Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1030-1220 MPa) (maximum thickness 65 mm)
BS TA 58:1974. Specification for plate of titanium-copper alloy (tensile strength 520-640 MPa) (maximum thickness 10 mm)
BS TA 59:1980. Specification for sheet and strip of titanium-aluminium-vanadium alloy (tensile strength 920 MPa to 1180 MPa)
BS V 38:1967. Specification for Sitka spruce as rough timber
BS W 12:1968. Specification for preformed galvanized carbon steel wire rope (ISO diameters and strengths)
BS W 13:1973. Specification for preformed corrosion-resisting steel wire rope (ISO diameters and strengths)
BS W 14:1999, ISO 9763:1999. Aircraft control wire rope assemblies. Technical specification
BS X 26:1966. Specification for doping and finishing schemes for fabric covered aircraft
BS X 27:1966. Specification for cellulose finishing scheme for aeronautical purposes
BS X 28:1966. Specification for matt synthetic finishing scheme for aeronautical purposes
BS X 29:1966. Specification for high gloss finishing scheme for aeronautical purposes
BS X 30:1966. Specification for light-weight aluminium finishing scheme (cellulose base) for aeronautical purposes
BS X 31:1967. Specification for low temperature stoving scheme for aeronautical purposes
BS X 32:1991. Specification for pretreatment primer for aerospace purposes
BS X 33:1991. Specification for two component epoxy primer for aerospace purposes
BS X 34:1992. Specification for air drying, two component, polyurethane finish for aerospace purposes
BS X 35:1998. Specification for selectively removable intermediate coating for aerospace purposes
BS X 36:1998. Specification for paint remover for air drying selectively removable paint scheme for aerospace purposes
BS X 38:2005. Heat curing paint scheme for aerospace purposes. Specification
BS Z 1:1997, ISO 11103:1991. Space data and information transfer systems. Radio metric and orbit data
BS Z 10:1998, ISO 15395:1998. Space data and information transfer systems. Standard formatted data units. Control Authority data structures
BS Z 100:1999, ISO 14625:1999. Space systems. Ground support equipment for use at launch, landing, or retrieval sites. General requirements
BS Z 11:1998, ISO 15396:1998. Space data and information transfer systems. Cross support reference model. Space link extension services
BS Z 12:1998, ISO 12171:1998. Space data and information transfer systems. Telecommand. Channel service. Architectural specification
BS Z 13:1998, ISO 12174:1998. Space data and information transfer systems. Telecommand. Data management service. Architectural specification
BS Z 14:1998, ISO 12173:1998. Space data and information transfer systems. Telecommand. Command operation procedures
BS Z 15:1998, ISO 12172:1998. Space data and information transfer systems. Telecommand. Data routing service
BS Z 17:2000, ISO 15887:2000. Space data and information transfer Systems. Data systems. Lossless data compression
BS Z 18:2000, ISO 15888:2000. Space data and information transfer systems. Standard formatted data units. Referencing environment
BS Z 19:2000, ISO 15889:2000. Space data and information transfer systems. Data description language. EAST specification
BS Z 2:1997, ISO 11104:1991. Space data and information transfer systems. Time code formats
BS Z 3:1997, ISO 11754:1994. Space data and information transfer systems. Telemetry channel coding
BS Z 4:1997, ISO 12175:1994. Space data and information transfer systems. Standard formatted data units. Structure and construction rules
BS Z 5:1997, ISO 13764:1996. Space data and information transfer systems. Standard formatted data units. Control authority procedures
BS Z 6:1998, ISO 14961:1997. Space data and information transfer systems. Parameter value language specification
BS Z 7:1998, ISO 14962:1997. Space data and information transfer systems. ASCII encoded English
BS Z 8:1998, ISO 13419:1997. Space data and information transfer systems. Packet telemetry
BS Z 9:1998, ISO 13420:1997. Space data and information transfer systems. Advanced orbiting systems. Networks and data links. Architectural specification

 

脚注信息
 ©2013-2024 TECERT ≥ TEST & CERTIFICATION 特色检测 - 检测认证搜索引擎 粤ICP备13066711号-2  beian 粤公网安备 44030702000495号  ❤️ 机构 ❤️
访问统计