BS EN ISO 10511:1998. Prevailing torque type hexagon thin nuts (with non-metallic insert)
BS EN ISO 10511:2012. Prevailing torque type hexagon thin nuts (with non-metallic insert)
BS EN ISO 10512:1998. Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread. Property classes 6, 8 and 10
BS EN ISO 10512:2012. Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread. Property classes 6, 8 and 10
BS EN ISO 10513:1998. Prevailing torque type all-metal hexagon nut, style 2, with metric fine pitch thread. Property classes 8, 10 and 12
BS EN ISO 10513:2012. Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread. Property classes 8, 10 and 12
BS EN ISO 10517:2009+A1:2013. Powered hand-held hedge trimmers. Safety
BS EN ISO 10519:2001, BS 4289-10:1998. Rapeseed. Determination of chlorophyll content. Spectrometric method
BS EN ISO 10520:1998. Native starch. Determination of starch content. Ewers polarimetric method
BS EN ISO 10523:2012. Water quality. Determination of pH
BS EN ISO 10524-1:2006. Pressure regulators for use with medical gasesPressure regulators and pressure regulators with flow-metering devices
BS EN ISO 10524-2:2006. Pressure regulators for use with medical gasesManifold and line pressure regulators
BS EN ISO 10524-3:2006+A1:2013. Pressure regulators for use with medical gasesPressure regulators integrated with cylinder valves
BS EN ISO 10524-4:2008. Pressure regulators for use with medical gasesLow-pressure regulators
BS EN ISO 10528:1995. Textiles. Commercial laundering procedure for textile fabrics prior to flammability testing
BS EN ISO 10534-1:2001. Acoustics. Determination of sound absorption coefficient and impedance in impedances tubesMethod using standing wave ratio
BS EN ISO 10534-2:2001. Acoustics. Determination of sound absorption coefficient and impedance in impedance tubesTransfer-function method
BS EN ISO 10535:1998. Hoists for the transfer of disabled persons. Requirements and test methods
BS EN ISO 10535:2006. Hoists for the transfer of disabled persons. Requirements and test methods
BS EN ISO 10536-1:1995. Identification cards. Contactless integrated circuit(s) cardsPhysical characteristics
BS EN ISO 10539:2002. Animal and vegetable fats and oils. Determination of alkalinity
BS EN ISO 10545-1:1997. Ceramic tilesSampling and basis for acceptance
BS EN ISO 10545-10:1997. Ceramic tilesDetermination of moisture expansion
BS EN ISO 10545-11:1996. Ceramic tilesDetermination of crazing resistance for glazed tiles
BS EN ISO 10545-12:1997. Ceramic tilesDetermination of frost resistance
BS EN ISO 10545-13:1997. Ceramic tilesDetermination of chemical resistance
BS EN ISO 10545-14:1997. Ceramic tilesDetermination of resistance to stains
BS EN ISO 10545-15:1997. Ceramic tilesDetermination of lead and cadmium given off by glazed tiles
BS EN ISO 10545-16:2000. Ceramic tilesDetermination of small colour differences
BS EN ISO 10545-16:2012. Ceramic tilesDetermination of small colour differences
BS EN ISO 10545-2:1997. Ceramic tilesDetermination of dimensions and surface quality
BS EN ISO 10545-3:1997. Ceramic tilesDetermination of water absorption, apparent porosity, apparent relative density and bulk density
BS EN ISO 10545-4:1997. Ceramic tilesDetermination of modulus of rupture and breaking strength
BS EN ISO 10545-4:2012. Ceramic tilesDetermination of modulus of rupture and breaking strength
BS EN ISO 10545-5:1998. Ceramic tilesDetermination of impact resistance by measurement of coefficient of restitution
BS EN ISO 10545-6:1997. Ceramic tilesDetermination of resistance to deep abrasion for unglazed tiles
BS EN ISO 10545-6:2012. Ceramic tilesDetermination of resistance to deep abrasion for unglazed tiles
BS EN ISO 10545-7:1999. Ceramic tilesDetermination of resistance to surface abrasion for glazed tiles
BS EN ISO 10545-8:1996. Ceramic tilesDetermination of linear thermal expansion
BS EN ISO 10545-9:1996. Ceramic tilesDetermination of resistance to thermal shock
BS EN ISO 10545-9:2013. Ceramic tilesDetermination of resistance to thermal shock
BS EN ISO 10547:2009. Polyester fibre ropes. Double braid construction
BS EN ISO 10548:1996. Carbon fibre. Determination of size content
BS EN ISO 10548:2003. Carbon fibre. Determination of size content
BS EN ISO 10551:2001. Ergonomics of the thermal environment. Assessment of the influence of the thermal environment using subjective judgement scales
BS EN ISO 10554:2009. Polyamide fibre ropes. Double braid construction
BS EN ISO 10555-1:1997. Sterile, single-use intravascular cathetersGeneral requirements
BS EN ISO 10555-1:2009. Sterile, single-use intravascular cathetersGeneral requirements
BS EN ISO 10555-1:2013. Intravascular catheters. Sterile and single-use cathetersGeneral requirements
BS EN ISO 10555-2:1997. Sterile, single-use intravascular cathetersAngiographic catheters
BS EN ISO 10555-3:1997. Sterile, single-use intravascular cathetersCentral venous catheters
BS EN ISO 10555-3:2013. Intravascular catheters. Sterile and single-use cathetersCentral venous catheters
BS EN ISO 10555-4:1997. Sterile, single-use intravascular cathetersBalloon dilatation catheters
BS EN ISO 10555-4:2013. Intravascular catheters. Sterile and single-use cathetersBalloon dilatation catheters
BS EN ISO 10555-5:1997. Sterile, single-use intravascular cathetersOver-needle peripheral catheters
BS EN ISO 10555-5:2013. Intravascular catheters. Sterile and single-use cathetersOver-needle peripheral catheters
BS EN ISO 10556:2009. Fibre ropes of polyester/polyolefin dual fibres
BS EN ISO 10563:1998. Building construction. Sealants for joints. Determination of change in mass and volume
BS EN ISO 10563:2005. Building construction. Sealants. Determination of change in mass and volume
BS EN ISO 10564:1997. Soldering and brazing materials. Methods for the sampling of soft solders for analysis
BS EN ISO 10565:1997, BS 4289- 11:1994. Oilseeds. Simultaneous determination of oil and moisture contents. Method using pulsed nuclear magnetic resonance spectrometry
BS EN ISO 10565:1998, BS 4289-11:1998. Oilseeds. Simultaneous determination of oil and water contents. Methods using pulsed nuclear magnetic resonance spectrometry
BS EN ISO 10572:2009. Mixed polyolefin fibre ropes
BS EN ISO 10579:2013. Geometrical product specifications (GPS). Dimensioning and tolerancing. Non-rigid parts
BS EN ISO 10580:2012. Resilient, textile and laminate floor coverings. Test method for volatile organic compound (VOC) emissions
BS EN ISO 10582:2012. Resilient floor coverings. Heterogeneous poly(vinyl chloride) floor coverings. Specification
BS EN ISO 10590:1998. Building construction. Sealants. Determination of adhesion/cohesion properties at maintained extension after immersion in water
BS EN ISO 10590:2005. Building construction. Sealants. Determination of tensile properties of sealants at maintained extension after immersion in water
BS EN ISO 10591:1998. Building construction. Sealants. Determination of adhesion/cohesion properties after immersion in water
BS EN ISO 10591:2005. Building construction. Sealants. Determination of adhesion/cohesion properties of sealants after immersion in water
BS EN ISO 10592:1995. Small craft. Hydraulic steering systems
BS EN ISO 10595:2012. Resilient floor coverings. Semi-flexible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles. Specification
BS EN ISO 105-A01:1996 Colour Scale
BS EN ISO 105-A01:1996 Colour Scale. Textiles. Tests for colour fastnessStandard depths: matt
BS EN ISO 105-A01:1996. Textiles. Tests for colour fastnessGeneral principles of testing
BS EN ISO 105-A01:2010. Textiles. Tests for colour fastnessGeneral principles of testing
BS EN ISO 105-A04:1999. Textiles. Tests for colour fastnessMethod for the instrumental assessment of the degree of staining of adjacent fabrics
BS EN ISO 105-A05:1997. Textiles. Tests for colour fastnessInstrumental assessment of change of colour for determination of grey scale rating
BS EN ISO 105-A06:1997. Textiles. Tests for colour fastnessInstrumental determination of 1/1 standard depth of colour
BS EN ISO 105-A11:2012. Textiles. Tests for colour fastnessDetermination of colour fastness grades by digital imaging techniques
BS EN ISO 105-B01:1999. Textiles. Tests for colour fastnessColour fastness to light: Daylight
BS EN ISO 105-B02:1999. Textiles. Tests for colour fastnessColour fastness to artificial light: Xenon arc fading lamp test
BS EN ISO 105-B02:2013. Textiles. Tests for colour fastnessColour fastness to artificial light: Xenon arc fading lamp test
BS EN ISO 105-B03:1997. Textiles. Tests for colour fastnessColour fastness to weathering. Outdoor exposure
BS EN ISO 105-B04:1997. Textiles. Tests for colour fastnessColour fastness to artificial weathering. Xenon arc fading lamp test
BS EN ISO 105-B05:1996. Textiles. Tests for colour fastnessDetection and assessment of photochromism
BS EN ISO 105-B06:2004. Textiles. Tests for colour fastnessColour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
BS EN ISO 105-B07:2009. Textiles. Tests for colour fastnessColour fastness to light of textiles wetted with artificial perspiration
BS EN ISO 105-B08:1999+A1:2009. Textiles. Tests for colour fastnessQuality control of blue wool reference materials 1 to 7
BS EN ISO 105-B10:2011. Textiles. Tests for colour fastnessArtificial weathering. Exposure to filtered xenon-arc radiation
BS EN ISO 105-C06:1997. Textiles. Tests for colour fastnessColour fastness to domestic and commercial laundering
BS EN ISO 105-C06:2010. Textiles. Tests for colour fastnessColour fastness to domestic and commercial laundering
BS EN ISO 105-C07:2001. Textiles. Tests for colour fastnessColour fastness to wet scrubbing of pigment dyed or pigment printed textiles
BS EN ISO 105-C08:2002+A1:2008. Textiles. Tests for colour fastnessColour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator
BS EN ISO 105-C08:2010. Textiles. Tests for colour fastnessColour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator
BS EN ISO 105-C09:2003. Textiles. Tests for colour fastnessColour fastness to domestic and commercial laundering. Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator
BS EN ISO 105-C10:2007. Textiles. Tests for colour fastnessColour fastness to washing with soap or soap and soda
BS EN ISO 105-C12:2006. Textiles. Tests for colour fastnessColour fastness to industrial laundering
BS EN ISO 105-D01:1995, ISO 105-D01:1993. Textiles. Tests for colour fastnessColour fastness to dry cleaning
BS EN ISO 105-D01:2010. Textiles. Tests for colour fastnessColour fastness to dry cleaning using perchloroethylene solvent
BS EN ISO 105-D02:1996. Textiles. Tests for colour fastnessColour fastness to rubbing: Organic solvents
BS EN ISO 105-E01:1996. Textiles. Tests for colour fastnessColour fastness to water
BS EN ISO 105-E01:2010. Textiles. Tests for colour fastnessColour fastness to water
BS EN ISO 105-E01:2013. Textiles. Tests for colour fastnessColour fastness to water
BS EN ISO 105-E02:1996. Textiles. Tests for colour fastnessColour fastness to sea water
BS EN ISO 105-E02:2013. Textiles. Tests for colour fastnessColour fastness to sea water
BS EN ISO 105-E03:1997. Textiles. Tests for colour fastnessColour fastness to chlorinated water (swimming bath water)
BS EN ISO 105-E03:2010. Textiles. Tests for colour fastnessColour fastness to chlorinated water (swimming-pool water)
BS EN ISO 105-E04:1996. Textiles. Tests for colour fastnessColour fastness to perspiration
BS EN ISO 105-E04:2009. Textiles. Tests for colour fastnessColour fastness to perspiration
BS EN ISO 105-E04:2013. Textiles. Tests for colour fastnessColour fastness to perspiration
BS EN ISO 105-E05:1997. Textiles. Tests for colour fastnessColour fastness to spotting. Acid
BS EN ISO 105-E05:2006. Textiles. Tests for colour fastnessColour fastness to spotting. Acid
BS EN ISO 105-E05:2010. Textiles. Tests for colour fastnessColour fastness to spotting. Acid
BS EN ISO 105-E06:1997. Textiles. Tests for colour fastnessColour fastness to spotting. Alkali
BS EN ISO 105-E06:2006. Textiles. Tests for colour fastnessColour fastness to spotting. Alkali
BS EN ISO 105-E07:1997. Textiles. Tests for colour fastnessColour fastness to spotting. Water
BS EN ISO 105-E07:2010. Textiles. Tests for colour fastnessColour fastness to spotting. Water
BS EN ISO 105-E08:1997. Textiles. Tests for colour fastnessColour fastness to hot water
BS EN ISO 105-E09:1997. Textiles. Tests for colour fastnessColour fastness to potting
BS EN ISO 105-E09:2010. Textiles. Tests for colour fastnessColour fastness to potting
BS EN ISO 105-E10:1997, ISO 105-E10:1994. Textiles. Tests for colour fastnessColour fastness to decatizing
BS EN ISO 105-E11:1997. Textiles. Tests for colour fastnessColour fastness to steaming
BS EN ISO 105-E12:1997. Textiles. Tests for colour fastnessColour fastness to milling. Alkaline milling
BS EN ISO 105-E12:2010. Textiles. Tests for colour fastnessColour fastness to milling. Alkaline milling
BS EN ISO 105-E13:1997. Textiles. Tests for colour fastnessColour fastness to acid-felting. Severe
BS EN ISO 105-E14:1997. Textiles. Tests for colour fastnessColour fastness to acid-felting. Mild
BS EN ISO 105-E16:2007. Textiles. Tests for colour fastnessColour fastness to water spotting on upholstery fabrics
BS EN ISO 105-G01:1996. Textiles. Tests for colour fastnessColour fastness to nitrogen oxides
BS EN ISO 105-G02:1997. Textiles. Tests for colour fastnessColour fastness to burnt-gas fumes
BS EN ISO 105-G03:1997. Textiles. Tests for colour fastnessColour fastness to ozone in the atmosphere
BS EN ISO 105-J01:2000. Textiles. Tests for colour fastnessGeneral principles for measurement of surface colour
BS EN ISO 105-J02:2000. Textiles. Tests for colour fastnessInstrumental assessment of relative whiteness
BS EN ISO 105-J03:1997. Textiles. Tests for colour fastnessCalculation of colour differences
BS EN ISO 105-J03:2009. Textiles. Tests for colour fastnessCalculation of colour differences
BS EN ISO 105-J05:2007. Textiles. Tests for colour fastnessMethod for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCONO2)
BS EN ISO 105-N02:1995. Textiles. Tests for colour fastnessColour fastness to bleaching: Peroxide
BS EN ISO 105-N03:1995. Textiles. Tests for colour fastnessColour fastness to bleaching: Sodium chlorite (mild)
BS EN ISO 105-N04:1995. Textiles. Tests for colour fastnessColour fastness to bleaching: Sodium chlorite (severe)
BS EN ISO 105-N05:1995. Textiles. Tests for colour fastnessColour fastness to stoving
BS EN ISO 105-P01:1995, ISO 105-P01:1993. Textiles. Tests for colour fastnessColour fastness to dry heat (excluding pressing)
BS EN ISO 105-P02:1996. Textiles. Tests for colour fastnessColour fastness to pleating. Steam pleating
BS EN ISO 105-P02:2004. Textiles. Tests for colour fastnessColour fastness to pleating. Steam pleating
BS EN ISO 105-S01:1996. Textiles. Tests for colour fastnessColour fastness to vulcanization. Hot air
BS EN ISO 105-S02:1996. Textiles. Tests for colour fastnessColour fastness to vulcanization: Sulfur monochloride
BS EN ISO 105-S03:1996. Textiles. Tests for colour fastnessColour fastness to vulcanization. Open steam
BS EN ISO 105-X01:1996. Textiles. Tests for colour fastnessColour fastness to carbonizing: Aluminium chloride
BS EN ISO 105-X02:1996. Textiles. Tests for colour fastnessColour fastness to carbonizing: Sulfuric acid
BS EN ISO 105-X04:1997. Textiles. Tests for colour fastnessColour fastness to mercerizing
BS EN ISO 105-X05:1997. Textiles. Tests for colour fastnessColour fastness to organic solvents
BS EN ISO 105-X06:1997. Textiles. Tests for colour fastnessColour fastness to soda boiling
BS EN ISO 105-X07:1997. Textiles. Tests for colour fastnessColour fastness to cross-dyeing. Wool
BS EN ISO 105-X08:1997. Textiles. Tests for colour fastnessColours fastness to degumming
BS EN ISO 105-X09:1996. Textiles. Tests for colour fastnessColour fastness to formaldehyde
BS EN ISO 105-X10:1996. Textiles. Tests for colour fastnessAssessment of migration of textile colours into polyvinyl chloride coatings
BS EN ISO 105-X11:1996. Textiles. Tests for colour fastnessColour fastness to hot pressing
BS EN ISO 105-X12:1995. Textiles. Tests for colour fastnessColour fastness to rubbing
BS EN ISO 105-X12:2002. Textiles. Tests for colour fastnessColour fastness to rubbing
BS EN ISO 105-X13:1997. Textiles. Tests for colour fastnessColour fastness of wool dyes to processes using chemical means for creasing, pleating and setting
BS EN ISO 105-X14:1997. Textiles. Tests for colour fastnessColour fastness to acid chlorination of wool. Sodium dichloroisocyanurate
BS EN ISO 105-X16:2002. Textiles. Tests for colour fastnessColour fastness to rubbing. Small areas
BS EN ISO 105-X18:2007. Textiles. Tests for colour fastnessAssessment of the potential to phenolic yellowing of materials
BS EN ISO 105-Z01:1996. Textiles. Tests for colour fastnessColour fastness to metals in the dye-bath: chromium salts
BS EN ISO 105-Z02:1996. Textiles. Tests for colour fastnessColour fastness to metals in the dye-bath. Iron and copper
BS EN ISO 105-Z03:1998. Textiles. Tests for colour fastnessIntercompatibility of basic dyes for acrylic fibres
BS EN ISO 105-Z04:1998. Textiles. Tests for colour fastnessDispersibility of disperse dyes
BS EN ISO 105-Z05:1998. Textiles. Tests for colour fastnessDetermination of the dusting behaviour of dyes
BS EN ISO 105-Z06:2000. Textiles. Tests for colour fastnessEvaluation of dye and pigment migration
BS EN ISO 105-Z07:1998. Textiles. Tests for colour fastnessDetermination of application solubility and solution stability of water-soluble dyes
BS EN ISO 105-Z08:1998. Textiles. Tests for colour fastnessDetermination of solubility and solution stability of reactive dyes in the presence of electrolytes
BS EN ISO 105-Z09:1998. Textiles. Tests for colour fastnessDetermination of cold water solubility of water-soluble dyes
BS EN ISO 105-Z10:1999. Textiles. Tests for colour fastnessDetermination of relative colour strength of dyes in solution
BS EN ISO 105-Z11:2001. Textiles. Tests for colour fastnessEvaluation of speckiness of colorant dispersions
BS EN ISO 1060-1:1999. Plastics. Homopolymer and copolymer resins of vinyl chlorideDesignation system and basis for specifications
BS EN ISO 10601:2008. Micaceous iron oxide pigments for paints. Specifications and test methods
BS EN ISO 1060-2:1999. Plastics. Homopolymer and copolymer resins of vinyl chloridePreparation of test samples and determination of properties
BS EN ISO 1061:1999. Plastics. Unplasticized cellulose acetate. Determination of free acidity
BS EN ISO 10618:2000. Carbon fibre. Determination of tensile properties of resin-impregnated yarns
BS EN ISO 10618:2004. Carbon fibre. Determination of tensile properties of resin-impregnated yarn
BS EN ISO 10619-1:2011. Rubber and plastics hoses and tubing. Measurement of flexibility and stiffnessBending tests at ambient temperature
BS EN ISO 10619-2:2011. Rubber and plastics hoses and tubing. Measurement of flexibility and stiffnessBending tests at sub-ambient temperatures
BS EN ISO 10628:2001. Flow diagrams for process plants. General rules
BS EN ISO 10628-2:2012. Diagrams for the chemical and petrochemical industryGraphical symbols
BS EN ISO 10634:1996, BS 6068-5.18:1996. Water quality. Guidance for the preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium
BS EN ISO 10637:2000. Dental equipment. High and medium volume suction systems
BS EN ISO 10642:1998. Hexagon socket countersunk head screws
BS EN ISO 10642:2004+A1:2012. Hexagon socket countersunk head screws
BS EN ISO 10644:1998. Screw and washer assemblies with plain washers. Washer hardness classes 200 HV and 300 HV
BS EN ISO 10644:2009. Screw and washer assemblies made of steel with plain washers. Washer hardness classes 200 HV and 300 HV
BS EN ISO 10650-1:2005. Dentistry. Powered polymerization activatorsQuartz tungsten halogen lamps
BS EN ISO 10650-2:2007. Dentistry. Powered polymerization activatorsLight-emitting diode (LED) lamps
BS EN ISO 10651-2:2004. Lung ventilators for medical use. Particular requirements for basic safety and essential performanceHome care ventilators for ventilator-dependent patients
BS EN ISO 10651-2:2009. Lung ventilators for medical use. Particular requirements for basic safety and essential performanceHome care ventilators for ventilator-dependent patients
BS EN ISO 10651-4:2002. Lung ventilatorsParticular requirements for operator-powered resuscitators
BS EN ISO 10651-4:2009. Lung ventilators Particular requirements for operator-powered resuscitators
BS EN ISO 10651-6:2004. Lung ventilators for medical use. Particular requirements for basic safety and essential performanceHome-care ventilatory support devices
BS EN ISO 10651-6:2009. Lung ventilators for medical use. Particular requirements for basic safety and essential performanceHome-care ventilatory support devices
BS EN ISO 10664:1999. Hexalobular internal driving feature for bolts and screws
BS EN ISO 10664:2005. Hexalobular internal driving feature for bolts and screws
BS EN ISO 10666:1999. Drilling screws with tapping screw threads. Mechanical and functional properties
BS EN ISO 10669:1999. Plain washers for tapping screw and washer assemblies. Normal and large series. Product grade A
BS EN ISO 10673:1999. Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A
BS EN ISO 10673:2009. Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A
BS EN ISO 10683:2000. Fasteners. Non-electrolytically applied zinc flake coatings
BS EN ISO 10684:2004. Fasteners. Hot dip galvanized coatings
BS EN ISO 10685-1:2011. Ophthalmic optics. Spectacle frames and sunglasses electronic catalogue and identificationProduct identification and electronic catalogue product hierarchy
BS EN ISO 10685-2:2012. Ophthalmic optics. Spectacle frames and sunglasses electronic catalogue and identificationCommercial information
BS EN ISO 10685-3:2012. Ophthalmic optics. Spectacle frames and sunglasses electronic catalogue and identificationTechnical information
BS EN ISO 10692-1:2001. Gas cylinders. Gas cylinder valve connections for use in the microelectronics industryOutlet connections
BS EN ISO 10692-2:2001. Gas cylinders. Gas cylinder valve connections for use in the microelectronics industrySpecification and type testing for valve to cylinder connections
BS EN ISO 10695:2000. Water quality. Determination of selected organic nitrogen and phosphorus compounds. Gas chromatographic methods
BS EN ISO 10700:1995. Steel and iron. Determination of manganese content. Flame atomic absorption spectrometric method
BS EN ISO 10705-1:2001, BS 6068-4.11:1996. Water quality. Detection and enumeration of bacteriophagesDetection and enumeration of bacteriophages. Enumeration of F-specific RNA bacteriophages
BS EN ISO 10705-2:2001, BS 6068-4.13:2000. Water quality. Detection and enumeration of bacteriophagesEnumeration of somatic coliphages
BS EN ISO 10707:1998, BS 6068-5.16:1995. Water quality. Evaluation in an aqueous medium of the 'ultimate' aerobic biodegradability of organic compounds. Method by analysis of biochemical oxygen demand (closed bottle test)
BS EN ISO 1071:2003. Welding consumables. Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron. Classification
BS EN ISO 10710:2013. Water quality. Growth inhibition test with the marine and brackish water macroalga Ceramium tenuicorne
BS EN ISO 10712:1996, BS 6068-5.19:1996. Water quality. Pseudomonas putida growth inhibition test (Pseudomonas cell multiplication inhibition test)
BS EN ISO 10714:2002. Steel and iron. Determination of phosphorus content. Phosphovanadomolybdate spectrophotometric method
BS EN ISO 10715:2001, BS 3156-11.0.1:2001. Natural gas. Sampling guidelines
BS EN ISO 10717:2010. Footwear. Test method for slide fasteners. Burst strength
BS EN ISO 10720:2007. Steel and iron. Determination of nitrogen content. Thermal conductimetric method after fusion in a current of inert gas
BS EN ISO 10722:2007. Geosynthetics. Index test procedure for the evaluation of mechanical damage under repeated loading. Damage caused by granular material
BS EN ISO 10723:2002. Natural gas. Performance evaluation for on-line analytical systems
BS EN ISO 10723:2012. Natural gas. Performance evaluation for analytical systems
BS EN ISO 10724-1:2001. Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs)General principles and moulding of multipurpose test specimens
BS EN ISO 10724-2:2001. Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs)Small plates
BS EN ISO 10748:2011. Footwear. Test method for slide fasteners. Slider locking strength
BS EN ISO 10765:2010. Footwear. Test method for the characterization of elastic materials. Tensile performance
BS EN ISO 10768:2010. Footwear. Test method for the determination of the resistance of elastic materials for footwear to repeated extension. Fatigue resistance
BS EN ISO 10769:2011. Clay geosynthetic barriers. Determination of water absorption of bentonite
BS EN ISO 10772:2012. Geotextiles. Test method for the determination of the filtration behaviour of geotextiles under turbulent water flow conditions
BS EN ISO 10773:2011. Clay geosynthetic barriers. Determination of permeability to gases
BS EN ISO 10776:2012. Geotextiles and geotextile-related products. Determination of water permeability characteristics normal to the plane, under load
BS EN ISO 10781:2009. Electronic Health Record-System Functional Model, Release 1.1
BS EN ISO 10781:2009. Electronic health record-system functional model, release 1.1 CD-ROM
BS EN ISO 10801:2010. Nanotechnologies. Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method
BS EN ISO 10806:2003. Pipework. Fittings for corrugated metal hoses
BS EN ISO 10807:1997. Pipework. Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere
BS EN ISO 10808:2010. Nanotechnologies. Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing
BS EN ISO 10819:1997. Mechanical vibration and shock. Hand-arm vibration. Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
BS EN ISO 10819:2013. Mechanical vibration and shock. Hand-arm vibration. Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
BS EN ISO 10821:2005+A1:2009. Industrial sewing machines. Safety requirements for sewing machines, units and systems
BS EN ISO 10846-1:1999. Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elementsPrinciples and guidelines
BS EN ISO 10846-1:2008. Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elementsPrinciples and guidelines
BS EN ISO 10846-2:1999. Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elementsDynamic stiffness of elastic supports for translatory motion. Direct method
BS EN ISO 10846-2:2008. Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elementsDirect method for determination of the dynamic stiffness of resilient supports for translatory motion
BS EN ISO 10846-3:2002. Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elementsIndirect method for determination of the dynamic stiffness of resilient supports for translatory motion
BS EN ISO 10846-4:2003. Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elementsDynamic stiffness of elements other than resilient supports for translatory motion
BS EN ISO 10846-5:2009. Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elementsDriving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
BS EN ISO 10848-1:2006. Acoustics. Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining roomsFrame document
BS EN ISO 10848-2:2006. Acoustics. Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining roomsApplication to light elements when the junction has a small influence
BS EN ISO 10848-3:2006. Acoustics. Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining roomsApplication to light elements when the junction has a substantial influence
BS EN ISO 10848-4:2010. Acoustics. Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining roomsApplication to junctions with at least one heavy element
BS EN ISO 10862:2009. Small craft. Quick release system for trapeze harness
BS EN ISO 10863:2011. Non-destructive testing of welds. Ultrasonic testing. Use of time-of-flight diffraction technique (TOFD)
BS EN ISO 10870:2012. Water quality. Guidelines for the selection of sampling methods and devices for benthic macroinvertebrates in fresh waters
BS EN ISO 10873:2010. Dentistry. Denture adhesives
BS EN ISO 10874:2012. Resilient, textile and laminate floor coverings. Classification
BS EN ISO 10882-1:2001. Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zoneSampling of airborne particles
BS EN ISO 10882-1:2011. Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zoneSampling of airborne particles
BS EN ISO 10882-2:2000. Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zoneSampling of gases
BS EN ISO 10890:2010. Paints and varnishes. Modelling of biocide release rate from antifouling paints by mass-balance calculation
BS EN ISO 10893-1:2011. Non-destructive testing of steel tubesAutomated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness
BS EN ISO 10893-10:2011. Non-destructive testing of steel tubesAutomated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
BS EN ISO 10893-11:2011. Non-destructive testing of steel tubesAutomated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
BS EN ISO 10893-12:2011. Non-destructive testing of steel tubesAutomated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
BS EN ISO 10893-2:2011. Non-destructive testing of steel tubesAutomated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
BS EN ISO 10893-3:2011. Non-destructive testing of steel tubesAutomated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections
BS EN ISO 10893-4:2011. Non-destructive testing of steel tubesLiquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
BS EN ISO 10893-5:2011. Non-destructive testing of steel tubesMagnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
BS EN ISO 10893-6:2011. Non-destructive testing of steel tubesRadiographic testing of the weld seam of welded steel tubes for the detection of imperfections
BS EN ISO 10893-7:2011. Non-destructive testing of steel tubesDigital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
BS EN ISO 10893-8:2011. Non-destructive testing of steel tubesAutomated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
BS EN ISO 10893-9:2011. Non-destructive testing of steel tubesAutomated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes
BS EN ISO 10927:2011. Plastics. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
BS EN ISO 10930:2013. Soil quality. Measurement of the stability of soil aggregates subjected to the action of water
BS EN ISO 10931:2005. Plastics piping systems for industrial applications. Poly(vinylidene fluoride) (PVDF). Specifications for components and the system
BS EN ISO 10938:1998. Ophthalmic instruments. Chart projectors
BS EN ISO 10939:1998. Ophthalmic instruments. Slit-lamp microscopes
BS EN ISO 10939:2007. Ophthalmic instruments. Slit-lamp microscopes
BS EN ISO 10940:1998. Ophthalmic instruments. Fundus cameras
BS EN ISO 10940:2009. Ophthalmic instruments. Fundus cameras
BS EN ISO 10942:1998. Ophthalmic instruments. Direct ophthalmoscopes
BS EN ISO 10942:2006. Ophthalmic instruments. Direct ophthalmoscopes
BS EN ISO 10943:1998. Ophthalmic instruments. Indirect ophthalmoscopes
BS EN ISO 10943:2006. Ophthalmic instruments. Indirect ophthalmoscopes
BS EN ISO 10943:2011. Ophthalmic instruments. Indirect ophthalmoscopes
BS EN ISO 10944:1998. Ophthalmic optics. Synoptophores
BS EN ISO 10944:2009. Ophthalmic instruments. Synoptophores
BS EN ISO 10960:1997. Rubber and plastic hoses. Assessment of ozone resistance under dynamic conditions
BS EN ISO 10961:2012. Gas cylinders. Cylinder bundles. Design, manufacture, testing and inspection
BS EN ISO 10964:1997. Adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners
BS EN ISO 10991:2009. Micro process engineering. Vocabulary
BS EN ISO 10993-1:1998. Biological evaluation of medical devicesEvaluation and testing
BS EN ISO 10993-1:2003. Biological evaluation of medical devicesEvaluation and testing
BS EN ISO 10993-1:2009. Biological evaluation of medical devicesEvaluation and testing
BS EN ISO 10993-1:October 2009. Biological evaluation of medical devicesEvaluation and testing within a risk management process
BS EN ISO 10993-10:1996. Biological evaluation of medical devicesTests for irritation and sensitization
BS EN ISO 10993-10:2002. Biological evaluation of medical devicesTests for irritation and delayed-type hypersensitivity
BS EN ISO 10993-10:2009. Biological evaluation of medical devicesTests for irritation and delayed-type hypersensitivity
BS EN ISO 10993-10:2010. Biological evaluation of medical devicesTests for irritation and skin sensitization
BS EN ISO 10993-11:1996. Biological evaluation of medical devicesTests for systemic toxicity
BS EN ISO 10993-11:2006. Biological evaluation of medical devicesTests for systemic toxicity
BS EN ISO 10993-11:2009. Biological evaluation of medical devicesTests for systemic toxicity
BS EN ISO 10993-12:1997. Biological evaluation of medical devicesSample preparation and reference materials
BS EN ISO 10993-12:2004. Biological evaluation of medical devicesSample preparation and reference materials
BS EN ISO 10993-12:2007. Biological evaluation of medical devicesSample preparation and reference materials
BS EN ISO 10993-12:2009. Biological evaluation of medical devicesSample preparation and reference materials
BS EN ISO 10993-12:2012. Biological evaluation of medical devicesSample preparation and reference materials
BS EN ISO 10993-13:1999. Biological evaluation of medical devicesIdentification and quantification of degradation products from polymeric medical devices
BS EN ISO 10993-13:2009. Biological evaluation of medical devicesIdentification and quantification of degradation products from polymeric medical devices
BS EN ISO 10993-13:2010. Biological evaluation of medical devicesIdentification and quantification of degradation products from polymeric medical devices
BS EN ISO 10993-14:2001. Biological evaluation of medical devicesIdentification and quantification of degradation products from ceramics
BS EN ISO 10993-14:2009. Biological evaluation of medical devicesIdentification and quantification of degradation products from ceramics
BS EN ISO 10993-15:2001. Biological evaluation of medical devicesIdentification and quantification of degradation products from metals and alloys
BS EN ISO 10993-15:2009. Biological evaluation of medical devicesIdentification and quantification of degradation products from metals and alloys
BS EN ISO 10993-16:1997. Biological evaluation of medical devicesToxicokinetic study design for degradation products and leachables
BS EN ISO 10993-16:2009. Biological evaluation of medical devicesToxicokinetic study design for degradation products and leachables
BS EN ISO 10993-16:2010. Biological evaluation of medical devicesToxicokinetic study design for degradation products and leachables
BS EN ISO 10993-17:2002. Biological evaluation of medical devicesEstablishment of allowable limits for leachable substances
BS EN ISO 10993-17:2009. Biological evaluation of medical devicesEstablishment of allowable limits for leachable substances
BS EN ISO 10993-18:2005. Biological evaluation of medical devicesChemical characterization of materials
BS EN ISO 10993-18:2009. Biological evaluation of medical devicesChemical characterization of materials
BS EN ISO 10993-2:1998. Biological evaluation of medical devicesAnimal welfare requirements
BS EN ISO 10993-2:2006. Biological evaluation of medical devicesAnimal welfare requirements
BS EN ISO 10993-3:2003. Biological evaluation of medical devicesTests for genotoxicity, carcinogenicity and reproductive toxicity
BS EN ISO 10993-3:2009. Biological evaluation of medical devicesTests for genotoxicity, carcinogenicity and reproductive toxicity
BS EN ISO 10993-4:2002. Biological evaluation of medical devicesSelection of tests for interactions with blood
BS EN ISO 10993-4:2009. Biological evaluation of medical devicesSelection of tests for interactions with blood
BS EN ISO 10993-5:1999. Biological evaluation of medical devicesTests for in vitro cytotoxicity
BS EN ISO 10993-5:2009. Biological evaluation of medical devicesTests for in vitro cytotoxicity
BS EN ISO 10993-6:2007. Biological evaluation of medical devicesTests for local effects after implantation
BS EN ISO 10993-6:2009. Biological evaluation of medical devicesTests for local effects after implantation
BS EN ISO 10993-7:1996. Biological evaluation of medical devicesEthylene oxide sterilization residuals
BS EN ISO 10993-7:2008. Biological evaluation of medical devicesEthylene oxide sterilization residuals
BS EN ISO 10993-8:2001. Biological evaluation of medical devicesSelection and qualification of reference materials for biological tests
BS EN ISO 10993-9:1999. Biological evaluation of medical devicesFramework for identification and quantification of potential degradation products
BS EN ISO 10993-9:December 2009. Biological evaluation of medical devicesFramework for identification and quantification of potential degradation products
BS EN ISO 10993-9:May 2009. Framework for identification and quantification of potential degradation products
BS EN ISO 1101:2005. Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
BS EN ISO 1101:2013. Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
BS EN ISO 11052:2006. Durum wheat flour and semolina. Determination of yellow pigment content
BS EN ISO 11058:1999. Geotextiles and geotextile-related products. Determination of water permeability characteristics normal to the plane, without load
BS EN ISO 11058:2010. Geotextiles and geotextile-related products. Determination of water permeability characteristics normal to the plane, without load
BS EN ISO 11064-1:2001. Ergonomic design of control centresPrinciples for the design of control centres
BS EN ISO 11064-2:2001. Ergonomic design of control centresPrinciples for the arrangement of control suites
BS EN ISO 11064-3:2000. Ergonomic design of control centresControl room layout
BS EN ISO 11064-4:2004. Ergonomic design of control centresLayout and dimensions of workstations
BS EN ISO 11064-5:2008. Ergonomic design of control centresDisplays and controls
BS EN ISO 11064-6:2005. Ergonomic design of control centresEnvironmental requirements for control centres
BS EN ISO 11064-7:2006. Ergonomic design of control centresPrinciples for the evaluation of control centres
BS EN ISO 1107:2003. Fishing nets. Netting. Basic terms and definitions
BS EN ISO 11070:1999. Sterile, single-use intravascular catheter introducers
BS EN ISO 11073-10101:2005. Health informatics. Point-of-care medical device communications.Nomenclature
BS EN ISO 11073-10201:2005. Health informatics. Point-of-care medical device communicationDomain information model
BS EN ISO 11073-10404:2011. Health informatics. Personal health device communicationDevice specialization. Pulse oximeter
BS EN ISO 11073-10406:2012. Health informatics. Personal health device communicationDevice specialization. Basic electrocardiograph (ECG) (1- to 3-lead ECG)
BS EN ISO 11073-10407:2011. Health informatics. Personal health device communicationDevice specialization. Blood pressure monitor
BS EN ISO 11073-10408:2011. Health informatics. Personal health device communicationDevice specialization. Thermometer
BS EN ISO 11073-10415:2011. Health informatics. Personal health device communicationDevice specialization. Weighing scale
BS EN ISO 11073-10417:2011. Health informatics. Personal health device communicationDevice specialization. Glucose meter
BS EN ISO 11073-10420:2012. Health informatics. Personal health device communicationDevice specialization. Body composition analyzer
BS EN ISO 11073-10421:2012. Health informatics. Personal health device communicationDevice specialization. Peak expiratory flow monitor (peak flow)
BS EN ISO 11073-10471:2011. Health Informatics. Personal health device communicationDevice specialization. Independent living activity hub
BS EN ISO 11073-10472:2012. Health Informatics. Personal health device communicationDevice specialization. Medication monitor
BS EN ISO 11073-20101:2005. Health informatics. Point-of-care medical device communicationApplication profiles. Base standard
BS EN ISO 11073-20601:2011. Health informatics. Personal health device communicationApplication profile. Optimized exchange protocol
BS EN ISO 11073-30200:2005. Health informatics. Point-of-care medical device communicationTransport profile. Cable connected
BS EN ISO 11073-30300:2005. Health informatics. Point-of-care medical device communicationTransport profile. Infrared wireless
BS EN ISO 11073-30400:2012. Health informatics. Point-of-care medical device communicationInterface profile. Cabled Ethernet
BS EN ISO 11079:2007. Ergonomics of the thermal environment. Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects
BS EN ISO 11085:2010. Cereals, cereals-based products and animal feeding stuffs. Determination of crude fat and total fat content by the Randall extraction method
BS EN ISO 11091:1999. Construction drawings. Landscape drawing practice
BS EN ISO 1110:1998. Plastics. Polyamides. Accelerated conditioning of test specimens
BS EN ISO 11102-1:1997. Reciprocating internal combustion engines. Handle starting equipmentSafety requirements and tests
BS EN ISO 11102-1:2009. Reciprocating internal combustion engines. Handle starting equipmentSafety requirements and tests
BS EN ISO 11102-2:1997. Reciprocating internal combustion engines. Handle starting equipmentMethod of testing the angle of disengagement
BS EN ISO 11102-2:2009. Reciprocating internal combustion engines. Handle starting equipmentMethod of testing the angle of disengagement
BS EN ISO 11105:1997. Small craft. Ventilation of petrol engine and/or petrol tank compartments
BS EN ISO 11111:1996. Safety requirements for textile machinery
BS EN ISO 11111-1:2005. Textile machinery. Safety requirementsCommon requirements
BS EN ISO 11111-1:2009. Textile machinery. Safety requirementsCommon requirements
BS EN ISO 11111-2:2005+A1:2009. Textile machinery. Safety requirementsSpinning preparatory and spinning machines
BS EN ISO 11111-3:2005+A1:2009. Textile machinery. Safety requirementsNonwoven machinery
BS EN ISO 11111-4:2005+A1:2009. Textile machinery. Safety requirementsYarn processing, cordage and rope manufacturing machinery
BS EN ISO 11111-5:2005+A1:2009. Textile machinery. Safety requirementsPreparatory machinery to weaving and knitting
BS EN ISO 11111-6:2005+A1:2009. Textile machinery. Safety requirementsFabric manufacturing machinery
BS EN ISO 11111-7:2005+A1:2009. Textile machinery. Safety requirementsDyeing and finishing machinery
BS EN ISO 11114-1:1998. Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contentsMetallic materials
BS EN ISO 11114-1:2012. Gas cylinders. Compatibility of cylinder and valve materials with gas contentsMetallic materials
BS EN ISO 11114-2:2001. Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contentsNon-metallic materials
BS EN ISO 11114-2:2013. Gas cylinders. Compatibility of cylinder and valve materials with gas contentsNon-metallic materials
BS EN ISO 11114-3:1998. Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contentsAutogenous ignition test in oxygen atmosphere
BS EN ISO 11114-3:2010. Gas cylinders. Compatibility of cylinder and valve materials with gas contentsAutogenous ignition test for non-metallic materials in oxygen atmosphere
BS EN ISO 11114-4:2005. Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contentsTest methods for selecting metallic materials resistant to hydrogen embrittlement
BS EN ISO 11116-1:1999. Gas cylinders. 17E taper thread for connection of valves to gas cylindersSpecifications
BS EN ISO 11116-2:1999. Gas cylinders. 17E taper thread for connection of valves to gas cylindersInspection gauges
BS EN ISO 11117:2008. Gas cylinders. Valve protection caps and valve guards. Design, construction and tests
BS EN ISO 11120:1999+A1:2013. Gas cylinders. Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l. Design construction and testing
BS EN ISO 11124-1:1997. Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasivesGeneral introduction and classification
BS EN ISO 11124-2:1997, BS 7079-E2:1994. Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasivesChilled-iron grit
BS EN ISO 11124-3:1997, BS 7079-E3:1994. Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasivesHigh-carbon cast-steel shot and grit
BS EN ISO 11124-4:1997, BS 7079-E4:1994. Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasivesLow-carbon cast-steel shot
BS EN ISO 11125-1:1997, BS 7079-E6:1994. Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasivesSampling
BS EN ISO 11125-2:1997, BS 7079-E7:1994. Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasivesDetermination of particle size distribution
BS EN ISO 11125-3:1997, BS 7079-E8:1994. Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasivesDetermination of hardness
BS EN ISO 11125-4:1997, BS 7079-E9:1994. Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasivesDetermination of apparent density
BS EN ISO 11125-5:1997, BS 7079-E10:1994. Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasivesDetermination of percentage defective particles and of microstructure
BS EN ISO 11125-6:1997, BS 7079-E11:1994. Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasivesDetermination of foreign matter
BS EN ISO 11125-7:1997, BS 7079-E12:1994. Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasivesDetermination of moisture
BS EN ISO 11126-1:1997, BS 7079-F1:1997. Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives.General introduction and classification
BS EN ISO 11126-10:2004, BS 7079-F10:2004. Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives.Almandite garnet
BS EN ISO 11126-3:1998, BS 7079-F3:1994. Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives.Copper refinery slag
BS EN ISO 11126-4:1998, BS 7079-F4:1994. Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives.Coal furnace slag
BS EN ISO 11126-5:1998, BS 7079-F5:1994. Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives.Nickel refinery slag
BS EN ISO 11126-6:1998, BS 7079-F6:1994. Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives.Iron furnace slag
BS EN ISO 11126-7:2001. Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives.Specification for fused aluminium oxide
BS EN ISO 11126-8:1998, BS 7079-F8:1994. Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives.Olivine sand
BS EN ISO 11126-9:2004, BS 7079-F9:2004. Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasivesStaurolite
BS EN ISO 11127-1:1998, BS 7079-F11:1994. Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasivesSampling
BS EN ISO 11127-1:2011. Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast cleaning abrasivesSampling
BS EN ISO 11127-2:1998, BS 7079-F12:1994. Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasivesDetermination of particle size distribution
BS EN ISO 11127-2:2011. Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasivesDetermination of particle size distribution
BS EN ISO 11127-3:1998, BS 7079-F13:1994. Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasivesDetermination of apparent density
BS EN ISO 11127-3:2011. Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasivesDetermination of apparent density
BS EN ISO 11127-4:1998, BS 7079-F14:1994. Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasivesAssessment of hardness by a glass slide test
BS EN ISO 11127-4:2011. Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasivesAssessment of hardness by a glass slide test
BS EN ISO 11127-5:1998, BS 7079-F15:1994. Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasivesDetermination of moisture
BS EN ISO 11127-5:2011. Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasivesDetermination of moisture
BS EN ISO 11127-6:1998, BS 7079-F16:1994. Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasivesDetermination of water-soluble contaminants by conductivity measurement
BS EN ISO 11127-6:2011. Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasivesDetermination of water-soluble contaminants by conductivity measurement
BS EN ISO 11127-7:1998, BS 7079-F17:1994. Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasivesDetermination of water-soluble chlorides
BS EN ISO 11127-7:2011. Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasivesDetermination of water-soluble chlorides
BS EN ISO 11130:1999. Corrosion of metals and alloys. Alternate immersion test in salt solution
BS EN ISO 11130:2010. Corrosion of metals and alloys. Alternate immersion test in salt solution
BS EN ISO 11135-1:2007. Sterilization of health care products. Ethylene oxideRequirements for development, validation and routine control of a sterilization process for medical devices
BS EN ISO 11137-1:2006+A1:2013. Sterilization of health care products. RadiationRequirements for development, validation and routine control of a sterilization process for medical devices
BS EN ISO 11137-2:2007. Sterilization of health care products. RadiationEstablishing the sterilization dose
BS EN ISO 11137-2:2012. Sterilization of health care Products. RadiationEstablishing the sterilization dose
BS EN ISO 11137-2:2013. Sterilization of health care products. RadiationEstablishing the sterilization dose
BS EN ISO 11137-3:2006. Sterilization of health care products. RadiationGuidance on dosimetric aspects
BS EN ISO 11138-1:2006. Sterilization of health care products. Biological indicatorsGeneral requirements
BS EN ISO 11138-2:2006. Sterilization of health care products. Biological indicatorsBiological indicators for ethylene oxide sterilization processes
BS EN ISO 11138-2:2009. Sterilization of health care products. Biological indicatorsBiological indicators for ethylene oxide sterilization processes
BS EN ISO 11138-3:2006. Sterilization of health care products. Biological indicatorsBiological indicators for moist heat sterilization processes
BS EN ISO 11138-3:2009. Sterilization of health care products. Biological indicatorsBiological indicators for moist heat sterilization processes
BS EN ISO 11138-4:2006. Sterilization of health care products. Biological indicatorsBiological indicators for dry heat sterilization processes
BS EN ISO 11138-5:2006. Sterilization of health care products. Biological indicatorsBiological indicators for low-temperature steam and formaldehyde sterilization processes
BS EN ISO 11140-1:2005. Sterilization of health care products. Chemical indicatorsGeneral requirements
BS EN ISO 11140-1:2009. Sterilization of health care products. Chemical indicatorsGeneral requirements
BS EN ISO 11140-3:2007. Sterilization of health care products. Chemical indicatorsClass 2 indicator systems for use in the Bowie and Dick-type steam penetration test
BS EN ISO 11140-3:2009. Sterilization of health care products. Chemical indicatorsClass 2 indicator systems for use in the Bowie and Dick-type steam penetration test
BS EN ISO 11140-4:2007. Sterilization of health care products. Chemical indicatorsClass 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration
BS EN ISO 11143:2000. Dental equipment. Amalgam separators
BS EN ISO 11143:2008. Dental equipment. Amalgam separators
BS EN ISO 11144:1997. Dental equipment. Connections for supply and waste lines
BS EN ISO 11145:1996. Optics and optical instruments. Lasers and laser-related equipment. Vocabulary and symbols
BS EN ISO 11145:2001. Optics and optical instruments. Lasers and laser-related equipment. Vocabulary and symbols
BS EN ISO 11145:2006. Optics and photonics. Lasers and laser-related equipment. Vocabulary and symbols
BS EN ISO 11145:2008. Optics and photonics. Lasers and laser-related equipment. Vocabulary and symbols
BS EN ISO 11146:2000. Laser and laser-related equipment. Test methods for laser beam parameters. Beam width, divergence angle and beam
BS EN ISO 11146-1:2005. Lasers and laser-related equipment. Test methods for laser beam widths, divergence angles and beam propagation ratiosStigmatic and simple astigmatic beams
BS EN ISO 11146-2:2005. Lasers and laser-related equipment. Test methods for laser beam widths, divergence angles and beam propagation ratiosGeneral astigmatic beams
BS EN ISO 11148-1:2011. Hand-held non-electric power tools. Safety requirementsAssembly power tools for non-threaded mechanical fasteners
BS EN ISO 11148-10:2011. Hand-held non-electric power tools. Safety requirementsCompression power tools
BS EN ISO 11148-11:2011. Hand-held non-electric power tools. Safety requirementsNibblers and shears
BS EN ISO 11148-12:2012. Hand-held non-electric power tools. Safety requirementsCircular, oscillating and reciprocating saws
BS EN ISO 11148-2:2011. Hand-held non-electric power tools. Safety requirementsCutting-off and crimping power tools
BS EN ISO 11148-3:2010. Hand-held non-electric power tools. Safety requirementsDrills and tappers
BS EN ISO 11148-3:2012. Hand-held non-electric power tools. Safety requirementsDrills and tappers
BS EN ISO 11148-4:2010. Hand-held non-electric power tools. Safety requirementsNon-rotary percussive power tools
BS EN ISO 11148-4:2012. Hand-held non-electric power tools. Safety requirementsNon-rotary percussive power tools
BS EN ISO 11148-5:2011. Hand-held non-electric power tools. Safety requirementsRotary percussive drills
BS EN ISO 11148-6:2010. Hand-held non-electric power tools. Safety requirementsAssembly power tools for threaded fasteners
BS EN ISO 11148-6:2012. Hand-held non-electric power tools. Safety requirementsAssembly power tools for threaded fasteners
BS EN ISO 11148-7:2012. Hand-held non-electric power tools. Safety requirementsGrinders
BS EN ISO 11148-8:2011. Hand-held non-electric power tools. Safety requirementsSanders and polishers
BS EN ISO 11148-9:2011. Hand-held non-electric power tools. Safety requirementsDie grinders
BS EN ISO 11149:1997. Optics and optical instruments. Lasers and laser related equipment. Fibre optic connectors for non-telecommunication laser applications
BS EN ISO 11151-1:2000. Lasers and laser-related equipment. Standard optical componentsComponents for the UV, visible and near-infrared spectral ranges
BS EN ISO 11151-2:2000. Lasers and laser-related equipment. Standard optical componentsComponents for the infrared spectral range
BS EN ISO 11161:2007+A1:2010. Safety of machinery. Integrated manufacturing systems. Basic requirements
BS EN ISO 1119:2002. Geometrical product specifications (GPS). Series of conical tapers and taper angles
BS EN ISO 1119:2011. Geometrical product specifications (GPS). Series of conical tapers and taper angles
BS EN ISO 11192:2005. Small craft. Graphical symbols
BS EN ISO 11196:1997. Anaesthetic gas monitors
BS EN ISO 11197:2004. Medical supply units
BS EN ISO 11197:2009. Medical supply units
BS EN ISO 11199-1:1999. Walking aids manipulated by both arms. Requirements and test methodsWalking frames
BS EN ISO 11199-2:1999. Walking aids manipulated by both arms. Requirements and test methodsRollators
BS EN ISO 11199-2:2005. Walking aids manipulated by both arms. Requirements and test methodsRollators
BS EN ISO 11199-3:2005. Walking aids manipulated by both arms. Requirements and test methodsWalking tables
BS EN ISO 1120:2002. Conveyor belts. Determination of strength of mechanical fastenings. Static test method
BS EN ISO 1120:2012. Conveyor belts. Determination of strength of mechanical fastenings. Static test method
BS EN ISO 11200:1996. Acoustics. Noise emitted by machinery and equipment. Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
BS EN ISO 11200:2009. Acoustics. Noise emitted by machinery and equipment. Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
BS EN ISO 11201:1996. Acoustics. Noise emitted by machinery and equipment. Measurement of emission sound pressure levels at a work station and at other specified positions. Engineering method in an essentially free field over a reflecting plane
BS EN ISO 11201:2009. Acoustics. Noise emitted by machinery and equipment. Measurement of emission sound pressure levels at a work station and at other specified positions. Engineering method in an essentially free field over a reflecting plane
BS EN ISO 11201:2010. Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
BS EN ISO 11202:1996. Acoustics. Noise emitted by machinery and equipment. Measurement of emission sound pressure levels at a work station and at other specified positions. Survey method in situ
BS EN ISO 11202:2009. Acoustics. Noise emitted by machinery and equipment. Measurement of emission sound pressure levels at a work station and at other specified positions. Survey method in situ
BS EN ISO 11202:2010. Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
BS EN ISO 11203:1996. Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
BS EN ISO 11203:2009. Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
BS EN ISO 11204:1996. Acoustics. Noise emitted by machinery and equipment. Measurement of emission sound pressure levels at a work station and at other specified positions. Method requiring environmental corrections
BS EN ISO 11204:2009. Acoustics. Noise emitted by machinery and equipment. Measurement of emission sound pressure levels at a work station and at other specified positions. Method requiring environmental corrections
BS EN ISO 11204:2010. Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
BS EN ISO 11205:2003. Acoustics. Noise emitted by machinery and equipment. Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
BS EN ISO 11205:2009. Acoustics. Noise emitted by machinery and equipment. Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
BS EN ISO 11210:1995. Determination of platinum in platinum jewellery alloys. Gravimetric method after precipitation of diammonium hexachloroplatinate
BS EN ISO 11212-1:1997. Starch and derived products. Heavy metals contentDetermination of arsenic content by atomic absorption spectrometry
BS EN ISO 11212-2:1997. Starch and derived products. Heavy metals contentDetermination of mercury content by atomic absorption spectrometry
BS EN ISO 11212-3:1997. Starch and derived products. Heavy metals contentDetermination of lead content by atomic absorption spectrometry with electrothermal atomization
BS EN ISO 11212-4:1997. Starch and derived products. Heavy metals contentDetermination of cadmium content by atomic absorption spectrometry with electrothermal atomization
BS EN ISO 11213:1995. Modified starch. Determination of acetyl content. Enzymatic method
BS EN ISO 11214:1996. Modified starch. Determination of carboxyl group content of oxidized starch
BS EN ISO 11215:1998. Modified starch. Determination of adipic acid content of acetylated di-starch adipates. Gas-chromatographic method
BS EN ISO 11216:1998. Modified starch. Determination of content of carboxymethyl groups in carboxymethyl starch
BS EN ISO 11238:2012. Health informatics. Identification of medicinal products. Data elements and structures for the unique identification and exchange of regulated information on substances
BS EN ISO 11239:2012. Health informatics. Identification of medicinal products. Data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms, units of presentation, routes of administration and packaging
BS EN ISO 11240:2012. Health informatics. Identification of medicinal products. Data elements and structures for the unique identification and exchange of units of measurement
BS EN ISO 11244:2000. Dental brazing investments
BS EN ISO 11245:2000. Dental restorations. Phosphate-bonded refractory die materials
BS EN ISO 11246:2000. Dental ethyl silicate bonded casting investments
BS EN ISO 11248:2000, BS 2782-1:Method 136:2000. Plastics. Thermosetting moulding materials. Evaluation of short-term performance at elevated temperatures
BS EN ISO 11252:2004. Lasers and laser-related equipment. Laser device. Minimum requirements for documentation
BS EN ISO 11252:2008. Lasers and laser-related equipment. Laser device. Minimum requirements for documentation
BS EN ISO 11252:2013. Lasers and laser-related equipment. Laser device. Minimum requirements for documentation
BS EN ISO 11254-1:2000. Lasers and laser-related equipment. Determination of laser-induced damage threshold of optical surfaces1-on-1 test
BS EN ISO 11254-2:2001. Lasers and laser-related equipment. Determination of laser-induced damage threshold of optical surfacesS-on-1 test
BS EN ISO 11254-3:2006. Lasers and laser-related equipment. Determination of laser-induced damage threshold of optical surfacesAssurance of laser power (energy) handling capabilities
BS EN ISO 11260:2011. Soil quality. Determination of effective cation exchange capacity and base saturation level using barium chloride solution
BS EN ISO 11269-1:2012. Soil quality. Determination of the effects of pollutants on soil floraMethod for the measurement of inhibition of root growth
BS EN ISO 11269-2:2013. Soil quality. Determination of the effects of pollutants on soil floraEffects of contaminated soil on the emergence and early growth of higher plants
BS EN ISO 1127:1997. Stainless steel tubes. Dimensions, tolerances and conventional masses per unit length
BS EN ISO 11290-1:1996+A1:2004, BS 5763-18:1997. Microbiology of food and animal feeding stuffs. Horizontal method for the detection and enumeration of Listeria monocytogenesDetection method
BS EN ISO 11290-2:1998+A1:2004. Microbiology of food and animal feeding Stuffs. Horizontal method for the detection and enumeration of Listeria monocytogenesEnumeration method
BS EN ISO 11295:2010. Classification and information on design of plastics piping systems used for renovation
BS EN ISO 11296-1:2011. Plastics piping systems for renovation of underground non-pressure drainage and sewerage networksGeneral
BS EN ISO 11296-3:2011. Plastics piping systems for renovation of under ground non-pressure drainage and sewerage networksLining with close-fit pipes
BS EN ISO 11296-4:2011. Plastics piping systems for renovation of underground non-pressure drainage and sewerage networksLining with cured-in-place pipes
BS EN ISO 11296-7:2013. Plastics piping systems for renovation of underground non-pressure drainage and sewerage networksLining with spirally-wound pipes
BS EN ISO 11297-1:2013. Plastics piping systems for renovation of underground drainage and sewerage networks under pressureGeneral
BS EN ISO 11297-3:2013. Plastics piping systems for renovation of underground drainage and sewerage networks under pressureLining with close-fit pipes
BS EN ISO 11298-1:2011. Plastics piping systems for renovation of underground water supply networksGeneral
BS EN ISO 11298-3:2011. Plastics piping systems for renovation of underground water supply networksLining with close-fit pipes
BS EN ISO 11299-1:2013. Plastics piping systems for renovation of underground gas supply networksGeneral
BS EN ISO 11299-3:2013. Plastics piping systems for renovation of underground gas supply networksLining with close-fit pipes
BS EN ISO 11303:2008. Corrosion of metals and alloys. Guidelines for selection of protection methods against atmospheric corrosion
BS EN ISO 11306:1998. Corrosion of metals and alloys. Guidelines for exposing and evaluating metals and alloys in surface sea water
BS EN ISO 1133:2000, BS 2782-7:Method 720A:1997. Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
BS EN ISO 1133:2005. Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
BS EN ISO 1133-1:2011. Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplasticsStandard method
BS EN ISO 1133-2:2011. Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplasticsMethod for materials sensitive to time-temperature history and/or moisture
BS EN ISO 11334-1:1997. Walking aids manipulated by one arm. Requirements and test methodsElbow crutches
BS EN ISO 11334-1:2007. Assistive products for walking manipulated by one arm. Requirements and test methodsElbow crutches
BS EN ISO 11334-4:1999. Walking aids manipulated by one arm. Requirements and test methodsWalking sticks with three or more legs
BS EN ISO 11337:2004. Plastics. Polyamides. Determination of e-caprolactam and w-laurolactum by gas chromatography
BS EN ISO 11337:2010. Plastics. Polyamides. Determination of e-caprolactam and w-laurolactam by gas chromatography
BS EN ISO 11339:2005. Adhesives. T-peel test for flexible-to-flexible bonded assemblies
BS EN ISO 11339:2010. Adhesives. T-peel test for flexible-to-flexible bonded assemblies
BS EN ISO 11341:1998, BS 3900-F14:1995. Paints and varnishes. Artificial weathering and exposure to artificial radiation. Exposure to filtered xenon-arc radiation
BS EN ISO 11341:2004, BS 3900-F14:2004. Paints and varnishes. Artificial weathering and exposure to artificial radiation. Exposure to filtered xenon-arc radiation
BS EN ISO 11343:2005. Adhesives. Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions. Wedge impact method
BS EN ISO 11348-1:1999. Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test)Method using freshly prepared bacteria
BS EN ISO 11348-1:2008. Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test)Method using freshly prepared bacteria
BS EN ISO 11348-2:1999. Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test)Method using liquid-dried bacteria
BS EN ISO 11348-2:2008. Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test)Method using liquid-dried bacteria
BS EN ISO 11348-3:1999. Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test)Method using freeze-dried bacteria
BS EN ISO 11348-3:2008. Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test)Method using freeze-dried bacteria
BS EN ISO 1135-4:2004. Transfusion equipment for medical useTransfusion sets for single use
BS EN ISO 1135-4:2010. Transfusion equipment for medical useTransfusion sets for single use
BS EN ISO 1135-4:2011. Transfusion equipment for medical useTransfusion sets for single use
BS EN ISO 1135-4:2012. Transfusion equipment for medical useTransfusion sets for single use
BS EN ISO 11354-1:2011. Advanced automation technologies and their applications. Requirements for establishing manufacturing enterprise process interoperabilityFramework for enterprise interoperability
BS EN ISO 11357-1:1997. Plastics. Differential scanning calorimetry (DSC)General principles
BS EN ISO 11357-1:2009. Plastics. Differential scanning calorimetry (DSC)General principles
BS EN ISO 11357-3:2013. Plastics. Differential scanning calorimetry (DSC)Determination of temperature and enthalpy of melting and crystallization
BS EN ISO 11357-4:2013. Plastics. Differential scanning calorimetry (DSC)Determination of specific heat capacity
BS EN ISO 11357-6:2013. Plastics. Differential scanning calorimetry (DSC)Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS EN ISO 11357-7:2013. Plastics. Differential scanning calorimetry Determination of crystallization kinetics
BS EN ISO 11358:1997, BS 2782-1:Method 127A:1997. Plastics. Thermogravimetry (TG) of polymers. General principles
BS EN ISO 11363-1:2010. Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylindersSpecifications
BS EN ISO 11363-2:2010. Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylindersInspection gauges
BS EN ISO 11369:1997, BS 6068-2.61:1997. Water quality. Determination of selected plant treatment agents. Method using high performance liquid chromatography with UV detection after solid-liquid extraction
BS EN ISO 11372:2011. Gas cylinders. Acetylene cylinders. Filling conditions and filling inspection
BS EN ISO 11376:2001. Plastics. Epoxy resins and glycidyl esters. Determination of inorganic chlorine
BS EN ISO 11378-2:2001. Textile floor coverings. Laboratory soiling testsDrum test
BS EN ISO 11380:1997. Optics and optical instruments. Ophthalmic optics. Formers
BS EN ISO 11381:1997. Optics and optical instruments. Ophthalmic optics. Screw threads
BS EN ISO 11399:2001. Ergonomics of the thermal environment. Principles and application of relevant International standards
BS EN ISO 1140:2004. Fibre ropes. Polyamide. 3-, 4- and 8-strand ropes
BS EN ISO 1140:2012. Fibre ropes. Polyamide. 3-, 4-, 8- and 12-strand ropes
BS EN ISO 11401:1998. Plastics. Phenolic resins. Separation by liquid chromatography
BS EN ISO 11402:1998. Plastics. Condensation resins. Determination of free formaldehyde
BS EN ISO 11402:2005. Phenolic, amino and condensation resins. Determination of free-formaldehyde content
BS EN ISO 11403-1:2000. Plastics. Acquisition and presentation of comparable multipoint dataMechanical properties
BS EN ISO 11403-1:2003. Plastics. Acquisition and presentation of comparable multipoint dataMechanical properties
BS EN ISO 11403-2:2000. Plastics. Acquisition and presentation of comparable multipoint dataThermal and processing properties
BS EN ISO 11403-2:2004. Plastics. Acquisition and presentation of comparable multipoint dataThermal and processing properties
BS EN ISO 11403-2:2012. Plastics. Acquisition and presentation of comparable multipoint dataThermal and processing properties
BS EN ISO 11403-3:2001. Plastics. Acquisition and presentation of comparable multipoint dataEnvironmental influences on properties
BS EN ISO 11409:1998. Plastics. Phenolic resins. Determination of heats and temperatures of reaction by differential scanning calorimetry
BS EN ISO 1141:2004. Fibre ropes. Polyester. 3-, 4- and 8-strand ropes
BS EN ISO 1141:2012. Fibre ropes. Polyester. 3-, 4-, 8- and 12-strand ropes
BS EN ISO 11426:1999. Determination of gold in gold jewellery alloys. Cupellation method (fire assay)
BS EN ISO 11431:2002. Building construction. Jointing products. Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass
BS EN ISO 11432:1998. Building construction. Sealants. Determination of resistance to compression
BS EN ISO 11432:2005. Building construction. Sealants. Determination of resistance to compression
BS EN ISO 11439:2000. Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
BS EN ISO 11439:2013. Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
BS EN ISO 11442:2006. Technical product documentation. Document management
BS EN ISO 11442-1:1996, BS 308-4.11:1996. Technical product documentation. Handling of computer-based technical informationSecurity requirements
BS EN ISO 11442-2:1996, BS 308-4.12:1996. Technical product documentation. Handling of computer-based technical informationOriginal documentation
BS EN ISO 11442-3:1996, BS 308-4.13:1996. Technical product documentation. Handling of computer-based technical informationPhases in the product design process
BS EN ISO 11442-4:1996, BS 308-4.14:1996. Technical product documentation. Handling of computer-based technical informationDocument management and retrieval systems
BS EN ISO 11446:2002. Passenger cars and light commercial vehicles with 12 V systems. 13-pole connectors between towing vehicles and trailers. Dimensions and contact allocation
BS EN ISO 11446:2004. Road vehicles. Connectors for the electrical connection of towing and towed vehicles. 13-pole connectors for vehicles with 12 V nominal supply voltage
BS EN ISO 11463:2008. Corrosion of metals and alloys. Evaluation of pitting corrosion
BS EN ISO 11468:2000. Plastics. Preparation of PVC pastes for test purposes. Dissolver method
BS EN ISO 11469:2000. Plastics. Generic identification and marking of plastics products
BS EN ISO 11489:1995. Determination of platinum in platinum jewellery alloys. Gravimetric method after reduction with mercury(I) chloride
BS EN ISO 11490:1995. Determination of palladium in palladium jewellery alloys. Gravimetric method with dimethyl glyoxime
BS EN ISO 11498:2000. Dental handpieces. Dental low-voltage electric motors
BS EN ISO 11499:1999. Dental cartridges for local anaesthetics
BS EN ISO 11499:2007. Dentistry. Single-use cartridges for local anaesthetics
BS EN ISO 11501:2004, ISO 11501:1995. Plastics. Film and sheeting. Determination of dimensional change on heatingDetermination of dimensional change on heating of film and sheeting
BS EN ISO 11502:2005, ISO 11502:1995. Plastics. Film and sheeting. Determination of blocking resistance
BS EN ISO 11507:2001, BS 3900-F16:1997. Paints and varnishes. Exposure of coatings to artificial weathering. Exposure to fluorescent UV and water
BS EN ISO 11507:2007, BS 3900-F16:2007. Paints and varnishes. Exposure of coatings to artificial weathering. Exposure to fluorescent UV lamps and water
BS EN ISO 11539:1999. Ophthalmic optics. Contact lenses. Classification and contact lens materials
BS EN ISO 11541:2002. Natural gas. Determination of water content at high pressure
BS EN ISO 11542-1:2001. Plastics. Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 11542-2:1998. Plastics. Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 11543:2002. Modified starch. Determination of hydroxypropyl content. Method using proton nuclear magnetic resonance (NMR) spectrometry
BS EN ISO 11545:2001. Agricultural irrigation equipment. Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles. Determination of uniformity of water distribution
BS EN ISO 11545:2009. Agricultural irrigation equipment. Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles. Determination of uniformity of water distribution
BS EN ISO 11546-1:1996. Acoustics. Determination of sound insulation performances of enclosuresMeasurements under laboratory conditions (for declaration purposes)
BS EN ISO 11546-1:2009. Acoustics. Determination of sound insulation performances of enclosuresMeasurements under laboratory conditions (for declaration purposes)
BS EN ISO 11546-2:1996. Acoustics. Determination of sound insulation performances of enclosuresMeasurements in situ (for acceptance and verification purposes)
BS EN ISO 11546-2:2009. Acoustics. Determination of sound insulation performances of enclosuresMeasurements in situ (for acceptance and verification purposes)
BS EN ISO 11547:1996. Small craft. Start-in-gear protection
BS EN ISO 11551:1997, ISO 11551:1997. Optics and optical instruments. Lasers and laser-related equipment. Test method for absorptance of optical laser components
BS EN ISO 11551:2003. Optics and optical instruments. Lasers and laser-related equipment. Test method for absorptance of optical laser components
BS EN ISO 11553-1:2005. Safety of machinery. Laser processing machinesGeneral safety requirements
BS EN ISO 11553-1:2008. Safety of machinery. Laser processing machinesGeneral safety requirements
BS EN ISO 11553-2:2007. Safety of machinery. Laser processing machinesSafety requirements for hand-held laser processing devices
BS EN ISO 11553-2:2008. Safety of machinery. Laser processing machinesSafety requirements for hand-held laser processing devices
BS EN ISO 11553-3:2013. Safety of machinery. Laser processing machinesNoise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2)
BS EN ISO 11554:1999. Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
BS EN ISO 11554:2003. Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
BS EN ISO 11554:2006. Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
BS EN ISO 11554:2008. Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
BS EN ISO 11562:1997. Geometrical product specifications (GPS). Surface texture: Profile method. Metrological characteristics of phase correct filters
BS EN ISO 11568-1:1996. Banking. Key management (retail)Introduction to key management
BS EN ISO 11568-2:1996. Banking. Key management (retail)Key management techniques for symmetric ciphers
BS EN ISO 11568-3:1996. Banking. Key management (retail)Key life cycle for symmetric ciphers
BS EN ISO 1157:2000. Plastics. Cellulose acetate in dilute solution. Determination of viscosity number and viscosity ratio
BS EN ISO 1158:1998. Plastics. Vinyl chloride homopolymers and copolymers. Determination of chlorine content
BS EN ISO 11591:2001. Small craft, engine driven. Field of vision from helm position
BS EN ISO 11591:2011. Small craft, engine-driven. Field of vision from helm position
BS EN ISO 11592:2001. Small craft less than 8 m length of hull. Determination of maximum propulsion power rating
BS EN ISO 11593:1998. Manipulating industrial robots. Automatic end effector systems. Vocabulary and presentation of characteristics
BS EN ISO 11600:2003+A1:2011. Building construction. Jointing products. Classification and requirements for sealants
BS EN ISO 11606:2001. Ships and marine technology. Marine electromagnetic compasses
BS EN ISO 11607-1:2006. Packaging for terminally sterilized medical devicesRequirements for materials, sterile barrier systems and packaging systems
BS EN ISO 11607-1:2009. Packaging for terminally sterilized medical devicesRequirements for materials, sterile barrier systems and packaging systems
BS EN ISO 11607-2:2006. Packaging for terminally sterilized medical devicesValidation requirements for forming, sealing and assembly processes
BS EN ISO 11608-1:2001. Pen-injectors for medical usePen-injectors. Requirements and test methods
BS EN ISO 11608-1:2012. Needle-based injection systems for medical use. Requirements and test methodsNeedle-based injection systems
BS EN ISO 11608-2:2001. Pen-injectors for medical useNeedles. Requirements and test methods
BS EN ISO 11608-2:2012. Needle-based injection systems for medical use. Requirements and test methodsNeedles
BS EN ISO 11608-3:2001. Pen-injectors for medical useFinished cartridges. Requirements and test methods
BS EN ISO 11608-3:2012. Needle-based injection systems for medical use. Requirements and test methodsFinished containers
BS EN ISO 11608-4:2007. Pen-injectors for medical useRequirements and test methods for electronic and electromechanical pen-injectors
BS EN ISO 11608-5:2012. Needle-based injection systems for medical use. Requirements and test methodsAutomated functions
BS EN ISO 11609:1998. Dentistry. Toothpastes. Requirements, test methods and marking
BS EN ISO 11609:2010. Dentistry. Dentifrices. Requirements, test methods and marking
BS EN ISO 11611:2007. Protective clothing for use in welding and allied processes
BS EN ISO 11612:2008. Protective clothing. Clothing to protect against heat and flame
BS EN ISO 11615:2012. Health informatics. Identification of medicinal products. Data elements and structures for the unique identification and exchange of regulated medicinal product information
BS EN ISO 11616:2012. Health informatics. Identification of medicinal products. Data elements and structures for the unique identification and exchange of regulated pharmaceutical product information
BS EN ISO 11621:2005. Gas cylinders. Procedures for change of gas service
BS EN ISO 11623:2002. Transportable gas cylinders. Periodic inspection and testing of composite gas cylinders
BS EN ISO 1163-1:2000. Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 1163-2:2000. Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 11640:1998. Leather. Tests for colour fastness. Colour fastness to cycles of to-and-fro rubbing
BS EN ISO 11640:2012. Leather. Tests for colour fastness. Colour fastness to cycles of to-and-fro rubbing
BS EN ISO 11641:2003. Leather. Tests for colour fastness. Colour fastness to perspiration
BS EN ISO 11641:2012. Leather. Tests for colour fastness. Colour fastness to perspiration
BS EN ISO 11642:1998. Leather. Tests for colour fastness. Colour fastness to water
BS EN ISO 11642:2012. Leather. Tests for colour fastness. Colour fastness to water
BS EN ISO 11643:1998. Leather. Tests for colour fastness. Colour fastness of small samples to dry-cleaning solutions
BS EN ISO 11643:2009. Leather. Tests for colour fastness. Colour fastness of small samples to solvents
BS EN ISO 11644:2003. Leather. Test for adhesion of finish
BS EN ISO 11644:2009. Leather. Test for adhesion of finish
BS EN ISO 11646:1998. Leather. Measurement of area
BS EN ISO 11654:1997. Acoustics. Sound absorbers for use in buildings. Rating of sound absorption
BS EN ISO 11664-1:2011. ColorimetryCIE standard colorimetric observers
BS EN ISO 11664-2:2011. ColorimetryCIE standard illuminants
BS EN ISO 11664-3:2013. ColorimetryCIE tristimulus values
BS EN ISO 11664-4:2011. ColorimetryCIE 1976 L*a*b* Colour space
BS EN ISO 11664-5:2011. ColorimetryCIE 1976 L*u*v* Colour space and u', v' uniform chromaticity scale diagram
BS EN ISO 11666:2010. Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
BS EN ISO 11667:2000. Fibre reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforcement-fibre and mineral-filler content. Dissolution methods
BS EN ISO 11668:2001, BS 6782-13:1998. Binders for paints and varnishes. Chlorinated polymerization resins. General methods of test
BS EN ISO 11670:2000. Lasers. Test methods for laser beam parameters. Beam positional stability
BS EN ISO 11670:2003. Lasers and laser-related equipment. Test methods for laser beam parameters. Beam positional stability
BS EN ISO 1167-1:2006. Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressureGeneral method
BS EN ISO 1167-2:2006. Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressurePreparation of pipe test pieces
BS EN ISO 1167-3:2007. Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressurePreparation of components
BS EN ISO 11674:2001. Ships and marine technology. Heading control systems
BS EN ISO 1167-4:2007. Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressurePreparation of assemblies
BS EN ISO 11680-1:2001. Machinery for forestry. Safety requirements and testing for pole-mounted powered pruners.Units fitted with an integral combustion engine
BS EN ISO 11680-1:2008. Machinery for forestry. Safety requirements and testing for pole- mounted powered pruners Units fitted with an integral combustion engine
BS EN ISO 11680-1:2011. Machinery for forestry. Safety requirements and testing for pole-mounted powered prunersMachines fitted with an integral combustion engine
BS EN ISO 11680-2:2001. Machinery for forestry. Safety requirements and testing for pole-mounted powered pruners.Units for use with a back-pack power source
BS EN ISO 11680-2:2008. Machinery for forestry. Safety requirements and testing for pole-mounted powered prunersUnits for use with a back-pack power source
BS EN ISO 11680-2:2011. Machinery for forestry. Safety requirements and testing for pole-mounted powered prunersMachines for use with backpack power source
BS EN ISO 11681-1:2004. Machinery for forestry. Portable chain-saw safety requirements and testingChain-saws for forest service
BS EN ISO 11681-1:2008. Machinery for forestry. Portable chain-saw safety requirements and testingChain-saws for forest service
BS EN ISO 11681-1:2011. Machinery for forestry. Portable chain-saw safety requirements and testingChain-saws for forest service
BS EN ISO 11681-2:1998. Machinery for forestry. Portable chain-saws. Safety requirements and testingChain-saws for tree service
BS EN ISO 11681-2:2006. Machinery for forestry. Portable chain-saw safety requirements and testingChain-saws for tree service
BS EN ISO 11681-2:2008. Machinery for forestry. Portable chain-saw safety requirements and testingChain-saws for tree service
BS EN ISO 11681-2:2011. Machinery for forestry. Portable chain-saw safety requirements and testingChain-saws for tree service
BS EN ISO 11683:1997. Packaging. Tactile warnings of danger. Requirements
BS EN ISO 11688-1:1998. Acoustics. Recommended practice for the design of low-noise machinery and equipmentPlanning
BS EN ISO 11688-1:2009. Acoustics. Recommended practice for the design of low-noise machinery and equipmentPlanning
BS EN ISO 11689:1996. Acoustics. Procedure for the comparison of noise-emission data for machinery and equipment
BS EN ISO 11690-1:1997. Acoustics. Recommended practice for the design of low-noise workplaces containing machineryNoise control strategies
BS EN ISO 11690-2:1997. Acoustics. Recommended practice for the design of low-noise workplaces containing machineryNoise control measures
BS EN ISO 11690-3:1999. Acoustics. Recommended practice for the design of low-noise workplaces containing machinerySound propagation and noise prediction in workrooms
BS EN ISO 11691:1997. Acoustics. Measurement of insertion loss of ducted silencers without flow. Laboratory survey method
BS EN ISO 11691:2009. Acoustics. Measurement of insertion loss of ducted silencers without flow. Laboratory survey method
BS EN ISO 11699-1:2011. Non-destructive testing. Industrial radiographic filmClassification of film systems for industrial radiography
BS EN ISO 11699-2:2011. Non-destructive testing. Industrial radiographic filmsControl of film processing by means of reference values
BS EN ISO 11701:2009. Vegetable fats and oils. Determination of phospholipids content in lecithins by HPLC using a light-scattering detector
BS EN ISO 11702:2009. Animal and vegetable fats and oils. Enzymatic determination of total sterols content
BS EN ISO 11715-1:1998. Ophthalmic optics. Format of digital data files for data transfer for profiling of spectacle lensesTwo-dimensional tracers
BS EN ISO 1172:1999. Textile-glass-reinforced plastics. Prepregs, moulding compounds and laminates. Determination of the textile-glass and mineral-filler content. Calcination methods
BS EN ISO 11721-1:2001. Textiles. Determination of resistance of cellulose-containing textiles to micro-organisms. Soil burial testAssessment of rot-retardant finishing
BS EN ISO 11721-2:2003. Textiles. Determination of resistance of cellulose-containing textiles to micro-organisms. Soil burial testIdentification of long-term resistance of a rot retardant finish
BS EN ISO 11731-2:2008, BS 6068-4.18:2004. Water quality. Detection and enumeration of LegionellaDirect membrane filtration method for waters with low bacterial counts
BS EN ISO 11732:1997. Water quality. Determination of ammonium nitrogen by flow analysis (CFA and FIA) and spectrometric detection
BS EN ISO 11732:2005, BS 6068-2.93:2005. Water quality. Determination of ammonium nitrogen. Method by flow analysis (CFA and FIA) and spectrometric detection
BS EN ISO 11733:1998, BS 6068-5.20:1996. Water quality. Evaluation of the elimination and biodegradability of organic compounds in an aqueous medium. Activated sludge simulation test
BS EN ISO 11733:2004. Water quality. Determination of the elimination and biodegradability of organic compounds in an aqueous medium. Activated sludge simulation test
BS EN ISO 11734:1999, BS 6068-5.21:1996. Water quality. Evaluation of the 'ultimate' anaerobic biodegradability of organic compounds in digested sludge. Method by measurement of the biogas production
BS EN ISO 11737-1:2006. Sterilization of medical devices. Microbiological methodsDetermination of a population of microorganisms on products
BS EN ISO 11737-2:2000. Sterilization of medical devices. Microbiological methodsTests of sterility performed in the validation of a sterilization process
BS EN ISO 11737-2:2009. Sterilization of medical devices. Microbiological methodsTests of sterility performed in the definition, validation and maintenance of a sterilization process
BS EN ISO 11746:2012. Rice. Determination of biometric characteristics of kernels
BS EN ISO 11747:2012. Rice. Determination of rice kernel resistance to extrusion after cooking
BS EN ISO 11758:1997. Rubber and plastics hoses. Exposure to a xenon arc lamp. Determination of changes in colour and appearance
BS EN ISO 11771:2010. Air quality. Determination of time-averaged mass emissions and emission factors. General approach
BS EN ISO 11782-1:2008. Corrosion of metals and alloys. Corrosion fatigue testingCycles to failure testing
BS EN ISO 11782-2:2008. Corrosion of metals and alloys. Corrosion fatigue testingCrack propagation testing using precracked specimens
BS EN ISO 1179-1:2008. Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealingThreaded ports
BS EN ISO 1179-2:2008. Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealingHeavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
BS EN ISO 1179-3:2008. Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealingLight-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
BS EN ISO 1179-4:2008. Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealingStud ends for general use only with metal-to-metal sealing (type B)
BS EN ISO 11806:1997. Agricultural and forestry machinery. Portable hand-held combustion engine driven brush cutters and grass trimmers. Safety
BS EN ISO 11806:2008. Agricultural and forestry machinery. Portable hand-held combustion engine driven brush cutters and grass trimmers. Safety
BS EN ISO 11806-1:2011. Agricultural and forestry machinery. Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmersMachines fitted with an integral combustion engine
BS EN ISO 11806-2:2011. Agricultural and forestry machinery. Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmersMachines for use with back-pack power unit
BS EN ISO 11807-1:2005. Integrated optics. VocabularyBasic terms and symbols
BS EN ISO 11807-2:2005. Integrated optics. VocabularyTerms used in classification
BS EN ISO 1181:2004. Fibre ropes. Manila and sisal. 3-, 4- and 8-strand ropes
BS EN ISO 11810:2002. Optics and optical instruments. Lasers and laser-related equipment. Test method for the laser-resistance of surgical drapes and/or patient-protective covers
BS EN ISO 11810-1:2005. Lasers and laser-related equipment. Test method and classification for the laser resistance of surgical drapes and/or patient protective coversPrimary ignition and penetration
BS EN ISO 11810-1:2009. Lasers and laser-related equipment. Test method and classification for the laser resistance of surgical drapes and/or patient protective coversPrimary ignition and penetration
BS EN ISO 11810-2:2007. Lasers and laser-related equipment. Test method and classification for the laser-resistance of surgical drapes and/or patient-protective coversSecondary ignition
BS EN ISO 11810-2:2009. Lasers and laser-related equipment. Test method and classification for the laser-resistance of surgical drapes and/or patient-protective coversSecondary ignition
BS EN ISO 11812:2002. Small craft. Watertight cockpits and quick-draining cockpits
BS EN ISO 11816-1:2000. Milk and milk products. Determination of alkaline phosphatase activity using a fluorimetric methodMilk and milk based drinks
BS EN ISO 11816-1:2006. Milk and milk products. Determination of alkaline phosphatase activityFluorimetric method for milk and milk-based drinks
BS EN ISO 11816-2:2003. Milk and milk products. Determination of alkaline phosphatase activity using a fluorimetric methodFluorometric method for cheese
BS EN ISO 11819-1:2001. Acoustics. Measurement of the influence of road surfaces on traffic noiseStatistical pass-by method
BS EN ISO 1182:2002. Reaction to fire tests for building products. Non-combustibility test
BS EN ISO 1182:2010. Reaction to fire tests for products. Non-combustibility test
BS EN ISO 11820:1997. Acoustics. Measurements on silencers in situ
BS EN ISO 11821:1997. Acoustics. Measurement of the in situ sound attenuation of a removable screen
BS EN ISO 1183-1:2004. Plastics. Methods for determining the density of non-cellular plasticsImmersion method, liquid pyknometer method and titration method
BS EN ISO 1183-1:2012. Plastics. Methods for determining the density of non-cellular plasticsImmersion method, liquid pyknometer method and titration method
BS EN ISO 1183-2:2004. Plastics. Methods for determining the density of non-cellular plasticsDensity gradient column method
BS EN ISO 1183-3:1999. Plastics. Methods for determining the density of non-cellular plasticsGas pyknometer method
BS EN ISO 11833-1:2007. Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristicsSheets of thickness not less than 1 mm
BS EN ISO 11833-1:2012. Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristicsSheets of thickness not less than 1 mm
BS EN ISO 11833-2:2006. Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristicsSheets of thickness less than 1 mm
BS EN ISO 11844-1:2008. Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheresDetermination and estimation of indoor corrosivity
BS EN ISO 11844-2:2008. Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheresDetermination of corrosion attack in indoor atmospheres
BS EN ISO 11844-3:2008. Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheresMeasurement of environmental parameters affecting indoor corrosivity
BS EN ISO 11846:2008. Corrosion of metals and alloys. Determination of resistance to intergranular corrosion of solution heat- treatable aluminium alloys
BS EN ISO 11850:2011. Machinery for forestry. General safety requirements
BS EN ISO 11857:2002. Textile floor coverings. Determination of resistance to delamination
BS EN ISO 11876:2010. Hardmetals. Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders. Flame atomic absorption spectrometric method
BS EN ISO 11885:1998, BS 6068-2.60:1998. Water quality. Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy
BS EN ISO 11885:2009. Water quality. Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
BS EN ISO 11890-1:2001, BS 3900-A23:2000. Paints and varnishes. Determination of volatile organic compound (VOC) contentDifference method
BS EN ISO 11890-1:2007. Paints and varnishes. Determination of volatile organic compound (VOC) contentDifference method
BS EN ISO 11890-2:2001, BS 3900-A24:2000. Paints and varnishes. Determination of volatile organic compound (VOC) contentGas chromatographic method
BS EN ISO 11890-2:2006. Paints and varnishes. Determination of volatile organic compound (VOC) contentGas-chromatographic method
BS EN ISO 11890-2:2013. Paints and varnishes. Determination of volatile organic compound (VOC) contentGas-chromatographic method
BS EN ISO 11897:2001. Packaging. Sacks made from thermoplastic flexible film. Tear propagation on edge folds
BS EN ISO 119:1998. Plastics. Phenol-formaldehyde mouldings. Determination of free phenols. Iodometric method
BS EN ISO 11904-1:2002. Acoustics. Determination of sound immission from sound sources placed close to the ear.Technique using a microphone in a real ear (MIRE technique)
BS EN ISO 11904-2:2004. Acoustics. Determination of sound immission from sound sources placed close to the earTechnique using a manikin
BS EN ISO 11905-1:1998, BS 6068-2.62:1998. Water quality. Determination of nitrogen.Method using oxidative digestion with peroxodisulfate
BS EN ISO 11908:1998. Binders for paints and varnishes. Amino resins. General methods of test
BS EN ISO 11909:1998, BS 6782-9:1996. Binders for paints and varnishes. Polyisocyanate resins. General methods of test
BS EN ISO 11909:2007. Binders for paints and varnishes. Polyisocyanate resins. General methods of test
BS EN ISO 11925-2:2002. Reaction to fire tests. Ignitability of building products subjected to direct impingement of flameSingle-flame source test
BS EN ISO 11925-2:2010. Reaction to fire tests. Ignitability of products subjected to direct impingement of flameSingle-flame source test
BS EN ISO 11930:2012. Cosmetics. Microbiology. Evaluation of the antimicrobial protection of a cosmetic product
BS EN ISO 11953:2010. Dentistry. Implants. Clinical performance of hand torque instruments
BS EN ISO 11957:1997. Acoustics. Determination of sound insulation performance of cabins. Laboratory and in situ measurements
BS EN ISO 11957:2009. Acoustics. Determination of sound insulation performance of cabins. Laboratory and in situ measurements
BS EN ISO 11960:1998. Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
BS EN ISO 11960:2001. Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
BS EN ISO 11960:2004. Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
BS EN ISO 11960:2011. Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
BS EN ISO 11961:1997. Petroleum and natural gas industries. Steel pipes for use as drill pipe. Specification
BS EN ISO 11961:2008. Petroleum and natural gas industries. Steel drill pipe
BS EN ISO 11963:1996. Plastics. Polycarbonate sheets. Types, dimensions and characteristics
BS EN ISO 11963:2012. Plastics. Polycarbonate sheets. Types, dimensions and characteristics
BS EN ISO 11969:1996, BS 6068-2.55:1996. Water quality. Determination of arsenic. Atomic absorption spectrometric method (hydride technique)
BS EN ISO 11970:2007. Specification and approval of welding procedures for production welding of steel castings
BS EN ISO 11978:2000
BS EN ISO 11978:2000. BS EN ISO 11978 Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer
BS EN ISO 11978:2000. Ophthalmic optics. Contact lenses and contact lens care products. Information supplied by the manufacturer
BS EN ISO 11979-1:2000. Ophthalmic implants. Intraocular lensesVocabulary
BS EN ISO 11979-1:2006. Ophthalmic implants. Intraocular lensesVocabulary
BS EN ISO 11979-1:2012. Ophthalmic implants. Intraocular lensesVocabulary
BS EN ISO 11979-10:2006. Ophthalmic implants. Intraocular lensesPhakic intraocular lenses
BS EN ISO 11979-2:2000. Ophthalmic implants. Intraocular lensesOptical properties and test methods
BS EN ISO 11979-3:2006. Ophthalmic implants. Intraocular lensesMechanical properties and test methods
BS EN ISO 11979-3:2012. Ophthalmic implants. Intraocular lensesMechanical properties and test methods
BS EN ISO 11979-4:2000. Ophthalmic implants. Intraocular lensesLabelling and information
BS EN ISO 11979-4:2008+A1:2012. Ophthalmic implants. Intraocular lensesLabelling and information
BS EN ISO 11979-5:2006. Ophthalmic implants. Intraocular lensesBiocompatibility
BS EN ISO 11979-6:2007. Ophthalmic implants. Intraocular lensesShelf-life and transport stability
BS EN ISO 11979-7:2006+A1:2012. Ophthalmic implants. Intraocular lensesClinical investigations
BS EN ISO 11979-8:2006. Ophthalmic implants. Intraocular lensesFundamental requirements
BS EN ISO 11979-8:2009+A1:2011. Ophthalmic implants. Intraocular lensesFundamental requirements
BS EN ISO 11979-9:2006. Ophthalmic implants. Intraocular lensesMultifocal intraocular lenses
BS EN ISO 11980:1998, BS 7208-16:1998. Ophthalmic optics. Contact lenses and contact lens care products. Guidance for clinical investigations
BS EN ISO 11980:2009. Ophthalmic optics. Contact lenses and contact lens care products. Guidance for clinical investigations
BS EN ISO 11980:2012. Ophthalmic optics. Contact lenses and contact lens care products. Guidance for clinical investigations
BS EN ISO 11981:1999, BS 7208-22:1999. Ophthalmic optics. Contact lenses and contact lens care products. Determination of physical compatibility of contact lens care products with contact lenses
BS EN ISO 11981:2009. Ophthalmic optics. Contact lenses and contact lens care products. Determination of physical compatibility of contact lens care products with contact lenses
BS EN ISO 11984:2000. Ophthalmic optics. Contact lenses. Determination of rigid lens flexure and breakage
BS EN ISO 11985:1998. Ophthalmic optics. Contact lenses. Ageing by exposure to UV and visible radiation (in vitro method)
BS EN ISO 11986:2001, BS 7208-21:2001. Ophthalmic optics. Contact lenses and contact lens care products. Guidelines for the determination of preservative uptake and release
BS EN ISO 11986:2010. Ophthalmic optics. Contact lenses and contact lens care products. Determination of preservative uptake and release
BS EN ISO 11987:1998, BS 7208-14:1998. Ophthalmic optics. Contact lenses. Determination of shelf-life
BS EN ISO 11987:2012. Ophthalmic optics. Contact lenses. Determination of shelf-life
BS EN ISO 11990:2000. Optics and optical instruments. Lasers and laser-related equipment. Determination of laser resistance of tracheal tube shafts
BS EN ISO 11990:2003. Optics and optical instruments. Lasers and laser-related equipment. Determination of laser resistance of tracheal tube shafts
BS EN ISO 11990-1:2011. Lasers and laser-related equipment. Determination of laser resistance of tracheal tubesTracheal tube shaft
BS EN ISO 11990-2:2010. Lasers and laser-related equipment. Determination of laser resistance of tracheal tubesTracheal tube cuffs
BS EN ISO 11997-1:2006. Paints and varnishes. Determination of resistance to cyclic corrosion conditionsWet (salt fog)/dry/humidity
BS EN ISO 11997-2:2006, BS 3900-F19:2006. Paints and varnishes. Determination of resistance to cyclic corrosion conditionsWet (salt fog)/dry/humidity/UV light
BS EN ISO 11998:2001, BS 3900-F17:1998. Paints and varnishes. Determination of wet-scrub resistance and cleanability of coatings
BS EN ISO 11998:2006. Paints and varnishes. Determination of wet-scrub resistance and cleanability of coatings
BS EN ISO 120:1998. Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Colorimetric comparison method
BS EN ISO 12001:1997. Acoustics. Noise emitted by machinery and equipment. Rules for the drafting and presentation of a noise test code
BS EN ISO 12001:2009. Acoustics. Noise emitted by machinery and equipment. Rules for the drafting and presentation of a noise test code
BS EN ISO 12004-1:2008. Metallic materials. Sheet and strip. Determination of forming-limit curvesMeasurement and application of forming-limit diagrams in the press shop
BS EN ISO 12004-2:2008. Metallic materials. Sheet and strip. Determination of forming-limit curvesDetermination of forming-limit curves in the laboratory
BS EN ISO 12005:2000. Lasers and laser-related equipment. Test methods for laser beam parameters. Polarization
BS EN ISO 12005:2003. Lasers and laser-related equipment. Test methods for laser beam parameters. Polarization
BS EN ISO 12017:1996. Plastics. Poly(methyl methacrylate) double- and triple-skin sheets. Test methods
BS EN ISO 12020:2000. Water quality. Determination of aluminium. Atomic absorption spectrometric methods
BS EN ISO 12048:2001. Packaging. Complete, filled transport packages. Compression and stacking tests using a compression tester
BS EN ISO 12052:2011. Health informatics. Digital imaging and communication in medicine (DICOM) including workflow and data management
BS EN ISO 12058-1:2002. Plastics. Determination of viscosity using a falling-ball viscometerInclined-tube method
BS EN ISO 1207:1994. Slotted cheese head screws. Product grade A
BS EN ISO 1207:2011. Slotted cheese head screws. Product grade A
BS EN ISO 12085:1997. Geometrical product specification (GPS). Surface texture. Profile method. Motif parameters
BS EN ISO 12086-1:2001. Plastics. Fluoropolymer dispersions and moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 12086-1:2006. Plastics. Fluoropolymer dispersions and moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 12086-2:2001. Plastics. Fluoropolymer dispersions and moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 12086-2:2006. Plastics. Fluoropolymer dispersions and moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 12099:2010. Animal feeding stuffs, cereals and milled cereal products. Guidelines for the application of near infrared spectrometry
BS EN ISO 12100:2010. Safety of machinery. General principles for design. Risk assessment and risk reduction
BS EN ISO 12100-1:2003+A1:2009. Safety of machinery. Basic concepts, general principles for designBasic terminology, methodology
BS EN ISO 12100-2:2003+A1:2009. Safety of machinery. Basic concepts, general principles for designTechnical principles
BS EN ISO 1211:1995, BS 1741-3:1995. Milk. Determination of fat content. Gravimetric method (reference method)
BS EN ISO 1211:2001, BS 1741-3:2001. Milk. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 1211:2010. Milk. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 12114:1997. Fibre-reinforced plastics. Thermosetting moulding compounds and prepregs. Determination of cure characteristics
BS EN ISO 12115:1997. Fibre-reinforced plastics. Thermosetting moulding compounds and prepregs. Determination of flowability, maturation and shelf life
BS EN ISO 12127-2:2007. Clothing for protection against heat and flame. Determination of contact heat transmission through protective clothing or constituent materialsTest method using contact heat produced by dropping small cylinders
BS EN ISO 12137:2011. Paints and varnishes. Determination of mar resistance
BS EN ISO 12137-1:2006, BS 3900-E17:1997. Paints and varnishes. Determination of mar resistanceMethod using a curved stylus
BS EN ISO 12137-2:2006, BS 3900-E18:1997. Paints and varnishes. Determination of mar resistanceMethod using a pointed stylus
BS EN ISO 12138:1997. Textiles. Domestic laundering procedures for textile fabrics prior to flammability testing
BS EN ISO 12153:2012. Welding consumables. Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys. Classification
BS EN ISO 12156-1:2000. Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR)Test method
BS EN ISO 12156-1:2006. Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR)Test method
BS EN ISO 12162:1996, BS 2782-11:Method 1121A:1996. Thermoplastics materials for pipes and fittings for pressure applications. Classification and design. Overall service (design) coefficient
BS EN ISO 12162:2009. Thermoplastics materials for pipes and fittings for pressure applications. Classification, designation and design coefficient
BS EN ISO 12163:2000. Dental baseplate/modelling wax
BS EN ISO 12179:2001. Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments
BS EN ISO 12180-1:2011. Geometrical product specifications (GPS). CylindricityVocabulary and parameters of cylindrical form
BS EN ISO 12180-2:2011. Geometrical product specifications (GPS). CylindricitySpecification operators
BS EN ISO 12181-1:2011. Geometrical product specifications (GPS). RoundnessVocabulary and parameters of roundness
BS EN ISO 12181-2:2011. Geometrical product specifications (GPS). RoundnessSpecification operators
BS EN ISO 12185:1996, BS 2000-365:1996,ISO 12185:1996. Methods of test for petroleum and its products. Crude petroleum and petroleum products. Determination of density. Oscillating U-tube method
BS EN ISO 12193:2000. Animal and vegetable fats and oils. Determination of lead content. Graphite furnace atomic absorption method
BS EN ISO 12193:2004. Animal and vegetable fats and oils. Determination of lead by direct graphite furnace atomic absorption spectroscopy
BS EN ISO 12205:1996, BS 2000-388:1996,ISO 12205:1995. Methods of test for petroleum and its products. Petroleum products. Determination of the oxidation stability of middle-distillate fuels
BS EN ISO 12209:2013. Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable air
BS EN ISO 12209-1:2001. Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable airYoke type connections
BS EN ISO 12209-2:2001. Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable airThreaded connections
BS EN ISO 12209-3:2001. Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable airAdaptor for 230 bar valves
BS EN ISO 12211:2012. Petroleum, petrochemical and natural gas industries. Spiral plate heat exchangers
BS EN ISO 12212:2012. Petroleum, petrochemical and natural gas industries. Hairpin-type heat exchangers
BS EN ISO 12213-1:2005. Natural gas. Calculation of compression factors.Introduction and guidelines
BS EN ISO 12213-1:2009. Natural gas. Calculation of compression factorIntroduction and guidelines
BS EN ISO 12213-2:2005. Natural gas. Calculation of compression factors.Calculation using a molar-composition analysis
BS EN ISO 12213-2:2009. Natural gas. Calculation of compression factorCalculation using molar-composition analysis
BS EN ISO 12213-3:2005. Natural gas. Calculation of compression factorCalculation using physical properties
BS EN ISO 12213-3:2009. Natural gas. Calculation of compression factorCalculation using physical properties
BS EN ISO 12215-1:2000. Small craft. Hull construction and scantlingsMaterials. Thermosetting resins, glass-fibre reinforcement, reference laminate
BS EN ISO 12215-2:2002. Small craft. Hull construction and scantlingsMaterials. Core materials for sandwich construction, embedded materials
BS EN ISO 12215-3:2002. Small craft. Hull construction and scantlingsMaterials. Steel, aluminium alloys, wood, other materials
BS EN ISO 12215-4:2002. Small craft. Hull construction and scantlingsWorkshop and manufacturing
BS EN ISO 12215-5:2008. Small craft. Hull construction and scantlingsDesign pressures for monohulls, design stresses, scantlings determination
BS EN ISO 12215-6:2008. Small craft. Hull construction and scantlingsStructural arrangements and details
BS EN ISO 12215-8:2009. Small craft. Hull construction and scantlingsRudders
BS EN ISO 12215-9:2012. Small craft. Hull construction and scantlingsSailing craft appendages
BS EN ISO 12216:2002. Small craft. Windows, portlights, hatches, deadlights and doors. Strength and watertightness requirements
BS EN ISO 12217-1:2002+A1:2009. Small craft. Stability and buoyancy assessment and categorizationNon-sailing boats of hull length greater than or equal to 6 m
BS EN ISO 12217-1:2013. Small craft. Stability and buoyancy assessment and categorizationNon-sailing boats of hull length greater than or equal to 6 m
BS EN ISO 12217-2:2002. Small craft. Stability and buoyancy assessment and categorizationSailing boats of hull length greater than or equal to 6 m
BS EN ISO 12217-2:2013. Small craft. Stability and buoyancy assessment and categorizationSailing boats of hull length greater than or equal to 6 m
BS EN ISO 12217-3:2002+A1:2009. Small craft. Stability and buoyancy assessment and categorizationBoats of hull length less than 6 m
BS EN ISO 12217-3:2013. Small craft. Stability and buoyancy assessment and categorizationBoats of hull length less than 6 m
BS EN ISO 12224-1:1998. Solder wire, solid and flux cored. Specification and test methodsClassification and performance requirements
BS EN ISO 12224-2:1999. Solder wire, solid and flux cored. Specification and test methodsDetermination of flux content
BS EN ISO 12224-3:2003. Solder wire, solid and flux cored. Specification and test methodsWetting balance test method for flux core solder wire efficacy
BS EN ISO 12228:1999, BS 684-2.38:1999. Animal and vegetable fats and oils. Determination of individual and total sterols contents. Gas chromatographic method
BS EN ISO 12236:1996. Geosynthetics. Static puncture test (CBR test)
BS EN ISO 12236:2006. Geosynthetics. Static puncture test (CBR test)
BS EN ISO 12241:1998. Thermal insulation for building equipment and industrial installations. Calculation rules
BS EN ISO 12241:2008. Thermal insulation for building equipment and industrial Installations. Calculation rules
BS EN ISO 12311:2013. Personal protective equipment. Test methods for sunglasses and related eyewear
BS EN ISO 12312-1:2013. Eye and face protection. Sunglasses and related eyewearSunglasses for general use
BS EN ISO 1234:1998. Split pins
BS EN ISO 12401:2009. Small craft. Deck safety harness and safety line. Safety requirements and test methods
BS EN ISO 12402-1:2005. Personal flotation devicesLifejackets for seagoing ships. Safety requirements
BS EN ISO 12402-10:2006. Personal flotation devicesSelection and application of personal flotation devices and other relevant devices
BS EN ISO 12402-2:2006+A1:2010. Personal flotation devicesLifejackets, performance level 275. Safety requirements
BS EN ISO 12402-3:2006+A1:2010. Personal flotation devicesLifejackets, performance level 150. Safety requirements
BS EN ISO 12402-4:2006+A1:2010. Personal flotation devicesLifejackets, performance level 100. Safety requirements
BS EN ISO 12402-5:2006+A1:2010. Personal flotation devicesBuoyancy aids (level 50). Safety requirements
BS EN ISO 12402-6:2006+A1:2010. Personal flotation devicesSpecial purpose lifejackets and buoyancy aids. Safety requirements and additional test methods
BS EN ISO 12402-7:2007+A1:2011. Personal flotation devicesMaterials and components. Safety requirements and test methods
BS EN ISO 12402-8:2006+A1:2011. Personal flotation devicesAccessories. Safety requirements and test methods
BS EN ISO 12402-9:2006+A1:2011. Personal flotation devicesTest methods
BS EN ISO 12474:2010. Hexagon socket head cap screws with metric fine pitch thread
BS EN ISO 1248:2008. Iron oxide pigments. Specifications and methods of test
BS EN ISO 12499:2008, BS 848-5:1999. Industrial fans. Mechanical safety of fans. Guarding
BS EN ISO 12543-1:1998
BS EN ISO 12543-1:1998. Glass in building. Laminated glass and laminated safety glassDefinitions and description of component parts
BS EN ISO 12543-1:1998. Glass in building. Laminated glass and laminated safety glassDefinitions and description of component parts
BS EN ISO 12543-1:2011. Glass in building. Laminated glass and laminated safety glassDefinitions and description of component parts
BS EN ISO 12543-2:1998. Glass in building. Laminated glass and laminated safety glassLaminated safety glass
BS EN ISO 12543-2:2011. Glass in building. Laminated glass and laminated safety glassLaminated safety glass
BS EN ISO 12543-3:1998
BS EN ISO 12543-3:1998. Glass in building. Laminated glass and laminated safety glassLaminated glass
BS EN ISO 12543-3:1998. Glass in building. Laminated glass and laminated safety glassLaminated glass
BS EN ISO 12543-3:2011. Glass in building. Laminated glass and laminated safety glassLaminated glass
BS EN ISO 12543-4:1998
BS EN ISO 12543-4:1998. Glass in building. Laminated glass and laminated safety glassTest methods for durability
BS EN ISO 12543-4:1998. Glass in building. Laminated glass and laminated safety glassTest methods for durability
BS EN ISO 12543-4:2011. Glass in building. Laminated glass and laminated safety glassTest methods for durability
BS EN ISO 12543-5:1998
BS EN ISO 12543-5:1998. Glass in building. Laminated glass and laminated safety glassDimensions and edge finishing
BS EN ISO 12543-5:1998. Glass in building. Laminated glass and laminated safety glassDimensions and edge finishing
BS EN ISO 12543-5:2011. Glass in building. Laminated glass and laminated safety glassDimensions and edge finishing
BS EN ISO 12543-6:1998
BS EN ISO 12543-6:1998. Glass in building. Laminated glass and laminated safety glassAppearance
BS EN ISO 12543-6:1998. Glass in building. Laminated glass and laminated safety glassAppearance
BS EN ISO 12543-6:2011. Glass in building. Laminated glass and laminated safety glassAppearance
BS EN ISO 12567-1:2000. Thermal performance of windows and doors. Determination of thermal transmittance by hot box methodComplete windows and doors
BS EN ISO 12567-1:2010. Thermal performance of windows and doors. Determination of thermal transmittance by the hot-box methodComplete windows and doors
BS EN ISO 12567-2:2005. Thermal performance of windows and doors. Determination of thermal transmittance by hot box methodRoof windows and other projecting windows
BS EN ISO 12569:2001. Thermal insulation in buildings. Determination of air change in buildings. Tracer gas dilution method
BS EN ISO 12569:2012. Thermal performance of buildings and materials. Determination of specific airflow rate in buildings. Tracer gas dilution method
BS EN ISO 12570:2000+A1:2013. Hygrothermal performance of building materials and products. Determination of moisture content by drying at elevated temperature
BS EN ISO 12571:2000. Hygrothermal performance of building materials and products. Determination of hygroscopic properties
BS EN ISO 12571:2013. Hygrothermal performance of building materials and products. Determination of hygroscopic sorption properties
BS EN ISO 12572:2001. Hygrothermal performance of building materials and products. Determination of water vapour transmission properties
BS EN ISO 12625-1:2005. Tissue paper and tissue productsGeneral guidance on terms
BS EN ISO 12625-1:2011. Tissue paper and tissue productsGeneral guidance on terms
BS EN ISO 12625-11:2012. Tissue paper and tissue productsDetermination of wet ball burst strength
BS EN ISO 12625-12:2010. Tissue paper and tissue productsDetermination of tensile strength of perforated lines. Calculation of perforation efficiency
BS EN ISO 12625-3:2005. Tissue paper and tissue productsDetermination of thickness, bulking thickness and apparent bulk density
BS EN ISO 12625-4:2005. Tissue paper and tissue productsDetermination of tensile strength, stretch at break and tensile energy absorption
BS EN ISO 12625-5:2005. Tissue paper and tissue productsDetermination of wet tensile strength
BS EN ISO 12625-6:2005. Tissue paper and tissue productsDetermination of grammage
BS EN ISO 12625-7:2007. Tissue paper and tissue products Determination of optical properties
BS EN ISO 12625-8:2006. Tissue paper and tissue productsWater-absorption time and water-absorption capacity, basket-immersion test method
BS EN ISO 12625-8:2010. Tissue paper and tissue productsWater-absorption time and water-absorption capacity, basket-immersion test method
BS EN ISO 12625-9:2005. Tissue paper and tissue productsDetermination of ball burst strength
BS EN ISO 12631:2012. Thermal performance of curtain walling. Calculation of thermal transmittance
BS EN ISO 1264:1997, BS 2782-4:Method 454C:1997. Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of pH of aqueous extract
BS EN ISO 1265:1997. Plastics. Polyvinyl chloride resins. Determination of number of impurities and foreign particles
BS EN ISO 1265:2007. Plastics. Poly(vinyl chloride) resins. Determination of number of impurities and foreign particles
BS EN ISO 12676:2003. Refractory products. Determination of resistance to carbon monoxide
BS EN ISO 12677:2003. Chemical analysis of refractory products by XRF. Fused cast bead method
BS EN ISO 12677:2011. Chemical analysis of refractory products by X-ray fluorescence (XRF). Fused cast-bead method
BS EN ISO 12680-1:2007. Methods of test for refractory productsDetermination of dynamic Young's modulus (MOE) by impulse excitation of vibration
BS EN ISO 12683:2004. Mechanically deposited coatings of zinc. Specification and test methods
BS EN ISO 12687:1998. Metallic coatings. Porosity tests. Humid sulfur (flowers of sulfur) test
BS EN ISO 1269:2006. Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of volatile matter (including water)
BS EN ISO 12690:2010. Metallic and other inorganic coatings. Thermal spray coordination. Tasks and responsibilities
BS EN ISO 12696:2012. Cathodic protection of steel in concrete
BS EN ISO 12706:2001. Non-destructive testing. Terminology. Terms used in penetrant testing
BS EN ISO 12706:2009. Non-destructive testing. Penetrant testing. Vocabulary
BS EN ISO 12718:2008. Non-destructive testing. Eddy current testing. Vocabulary
BS EN ISO 12732:2008. Corrosion of metals and alloys. Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
BS EN ISO 12737:1999. Metallic materials. Determination of plane-strain fracture toughness
BS EN ISO 12737:2005. Metallic materials. Determination of plane-strain fracture toughness
BS EN ISO 12737:2010. Metallic materials. Determination of plane-strain fracture toughness
BS EN ISO 12777-1:1996+A1:2008. Methods of test for pallet jointsDetermination of bending resistance of pallet nails, other dowel-type fasteners and staples
BS EN ISO 12777-2:2000. Methods of test for pallet jointsDetermination of withdrawal and head pull-through resistance of pallet nails and staples
BS EN ISO 12777-3:2002. Methods of test for pallet jointsDetermination of strength of pallet joints
BS EN ISO 12779:2013. Lactose. Determination of water content. Karl Fischer method
BS EN ISO 12780-1:2011. Geometrical product specifications (GPS). StraightnessVocabulary and parameters of straightness
BS EN ISO 12780-2:2011. Geometrical product specifications (GPS). StraightnessSpecification operators
BS EN ISO 12781-1:2011. Geometrical product specifications (GPS). FlatnessVocabulary and parameters of flatness
BS EN ISO 12781-2:2011. Geometrical product specifications (GPS). FlatnessSpecification operators
BS EN ISO 12782-1:2012. Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materialsExtraction of amorphous iron oxides and hydroxides with ascorbic acid
BS EN ISO 12782-2:2012. Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materialsExtraction of crystalline iron oxides and hydroxides with dithionite
BS EN ISO 12782-3:2012. Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materialsExtraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid
BS EN ISO 12782-4:2012. Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materialsExtraction of humic substances from solid samples
BS EN ISO 12782-5:2012. Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materialsExtraction of humic substances from aqueous samples
BS EN ISO 128-20:2001. Technical drawings. General principles of presentationBasic conventions for lines
BS EN ISO 128-21:2001. Technical drawings. General principles of presentationPreparation of lines by CAD systems
BS EN ISO 12836:2012. Dentistry. Digitizing devices for CAD/CAM systems for indirect dental restorations. Test methods for assessing accuracy
BS EN ISO 12846:2012. Water quality. Determination of mercury. Method using atomic absorption spectrometry (AAS) with and without enrichment
BS EN ISO 12855:2012. Electronic fee collection. Information exchange between service provision and toll charging
BS EN ISO 12863:2010. Standard test method for assessing the ignition propensity of cigarettes
BS EN ISO 12864:1998. Ophthalmic optics. Contact lenses. Determination of scattered light
BS EN ISO 12865:1998. Ophthalmic instruments. Retinoscopes
BS EN ISO 12865:2006. Ophthalmic instruments. Retinoscopes
BS EN ISO 12866:1999+A1:2008. Ophthalmic instruments. Perimeters
BS EN ISO 12867:1998. Ophthalmic instruments. Trial frames
BS EN ISO 12867:2010. Ophthalmic instruments. Trial frames
BS EN ISO 12870:1998, BS 6625-1:1998. Ophthalmic optics. Spectacle frames. General requirements and test methods
BS EN ISO 12870:2004. Ophthalmic optics. Spectacle frames. Requirements and test methods
BS EN ISO 12870:2009. Ophthalmic optics. Spectacle frames. Requirements and test methods
BS EN ISO 12870:2012. Ophthalmic optics. Spectacle frames. Requirements and test methods
BS EN ISO 12894:2001. Ergonomics of the thermal environment. Medical supervision of individuals exposed to extreme hot or cold environments
BS EN ISO 12922:2002. Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
BS EN ISO 12922:2012. Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
BS EN ISO 12932:2013. Welding. Laser-arc hybrid welding of steels, nickel and nickel alloys. Quality levels for imperfections
BS EN ISO 12937:2001, BS 2000-438:2001. Methods of test for petroleum and its products. BS 2000-438. Petroleum products. Determination of content. Coulometric Karl Fischer titration method
BS EN ISO 12944-1:1998. Paints and varnishes. Corrosion protection of steel structures by protective paint systemsGeneral introduction
BS EN ISO 12944-2:1998. Paints and varnishes. Corrosion protection of steel structures by protective paint systemsClassification of environments
BS EN ISO 12944-3:1998. Paints and varnishes. Corrosion protection of steel structures by protective paint systemsDesign considerations
BS EN ISO 12944-4:1998. Paints and varnishes. Corrosion protection of steel structures by protective paint systemsTypes of surface and surface preparation
BS EN ISO 12944-5:1998. Paints and varnishes. Corrosion protection of steel structures by protective paint systemsProtective paint systems
BS EN ISO 12944-5:2007. Paints and varnishes. Corrosion protection of steel structures by protective paint systemsProtective paint systems
BS EN ISO 12944-6:1998. Paints and varnishes. Corrosion protection of steel structures by protective paint systemsLaboratory performance test methods
BS EN ISO 12944-7:1998. Paints and varnishes. Corrosion protection of steel structures by protective paint systemsExecution and supervision of paintwork
BS EN ISO 12944-8:1998. Paints and varnishes. Corrosion protection of steel structures by protective paint systemsDevelopment of specifications for new work and maintenance
BS EN ISO 12945-1:2001. Textiles. Determination of fabric propensity to surface fuzzing and to pillingPilling box method
BS EN ISO 12945-2:2000. Textiles. Determination of fabric propensity to surface fuzzing and to pillingModified Martindale method
BS EN ISO 12947-1:1998. Textiles. Determination of the abrasion resistance of fabrics by the Martindale methodMartindale abrasion testing apparatus
BS EN ISO 12947-2:1998. Textiles. Determination of the abrasion resistance of fabrics by the Martindale methodDetermination of specimen breakdown
BS EN ISO 12947-3:1998. Textiles. Determination of the abrasion resistance of fabrics by the Martindale methodDetermination of mass loss
BS EN ISO 12947-4:1998. Textiles. Determination of the abrasion resistance of fabrics by the Martindale methodAssessment of appearance change
BS EN ISO 12952-1:1999. Textiles. Burning behaviour of bedding itemsGeneral test methods for the ignitability by a smouldering cigarette
BS EN ISO 12952-1:2010. Textiles. Assessment of the ignitability of bedding itemsIgnition source. Smouldering cigarette
BS EN ISO 12952-2:1999. Textiles. Burning behaviour of bedding itemsSpecific test methods for the ignitability by a smouldering cigarette
BS EN ISO 12952-2:2010. Textiles. Assessment of the ignitability of bedding itemsIgnition source. Match-flame equivalent
BS EN ISO 12952-3:1999. Textiles. Burning behaviour of bedding itemsGeneral test methods for the ignitability by a small open flame
BS EN ISO 12952-4:1999. Textiles. Burning behaviour of bedding itemsSpecific test methods for the ignitability by a small open flame
BS EN ISO 12956:1999. Geotextiles and geotextile-related products. Determination of the characteristic opening size
BS EN ISO 12956:2010. Geotextiles and geotextile-related products. Determination of the characteristic opening size
BS EN ISO 12957-1:2005. Geotextiles. Determination of friction characteristicsDirect shear test
BS EN ISO 12957-2:2005. Geotextiles. Determination of friction characteristicsInclined plane test
BS EN ISO 12958:1999. Geotextiles and geotextile-related products. Determination of water flow capacity in their plane
BS EN ISO 12958:2010. Geotextiles and geotextile-related products. Determination of water flow capacity in their plane
BS EN ISO 12966-2:2011. Animal and vegetable fats and oils. Gas chromatography of fatty acid methyl estersPreparation of methyl esters of fatty acids
BS EN ISO 12966-3:2009. Animal and vegetable fats and oils. Gas chromatography of fatty acid methyl estersPreparation of methyl esters using trimethylsulfonium hydroxide
BS EN ISO 12967-1:2011. Health informatics. Service architectureEnterprise viewpoint
BS EN ISO 12967-2:2011. Health informatics. Service architectureInformation viewpoint
BS EN ISO 12967-3:2011. Health informatics. Service architectureComputational viewpoint
BS EN ISO 12996:2013. Mechanical joining. Destructive testing of joints. Specimen dimensions and test procedure for tensile shear testing of single joints
BS EN ISO 13000-1:1998. Plastics. Polytetrafluoroethylene (PTFE) semi-finished productsRequirements and designation
BS EN ISO 13000-1:2005. Plastics. Polytetrafluoroethylene (PTFE) semi-finished productsRequirements and designation
BS EN ISO 13000-2:1998. Plastics. Polytetrafluoroethylene (PTFE) semi-finished productsPreparation of test specimens and determination of properties
BS EN ISO 13000-2:2005. Plastics. Polytetrafluoroethylene (PTFE) semi-finished productsPreparation of test specimens and determination of properties
BS EN ISO 13002:1999. Carbon fibre. Designation system for filament yarns
BS EN ISO 13015:2013. Woven fabrics. Distortion. Determination of skew and bow
BS EN ISO 13017:2012. Dentistry. Magnetic attachments
BS EN ISO 1302:2002. Geometrical product specifications (GPS). Indication of surface texture in technical product documentation
BS EN ISO 13032:2012, BS 2000-600:2012. Petroleum products. Determination of low concentration of sulfur in automotive fuels. Energy-dispersive X-ray fluorescence spectrometric method
BS EN ISO 1307:1996. Rubber and plastics hoses for general-purpose industrial applications. Bore diameters and tolerances, and tolerances on length
BS EN ISO 1307:2008. Rubber and plastics hoses. Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
BS EN ISO 13076:2012. Paints and varnishes. Lighting and procedure for visual assessments of coatings
BS EN ISO 13078:2013. Dentistry. Dental furnace. Test method for temperature measurement with separate thermocouple
BS EN ISO 13079:2011. Laboratory glass and plastics ware. Tubes for the measurement of the erythrocyte sedimentation rate by the Westergren method
BS EN ISO 13088:2012. Gas cylinders. Acetylene cylinder bundles. Filling conditions and filling inspection
BS EN ISO 13090-1:1998. Mechanical vibration and shock. Guidance on safety aspects of tests and experiments with peopleExposure to whole-body mechanical vibration and repeated shock
BS EN ISO 13102:2012. Geometrical product specifications (GPS). Dimensional measuring equipment. Electronic digital-indicator gauge. Design and metrological characteristics
BS EN ISO 13119:2012. Health informatics. Clinical knowledge resources. Metadata
BS EN ISO 13120:2013. Health informatics. Syntax to represent the content of healthcare classification systems. Classification Markup Language (ClaML)
BS EN ISO 13123:2011. Metallic and other inorganic Coatings. Test method of cyclic heating for thermal barrier coatings under temperature gradient
BS EN ISO 13127:2012. Packaging. Child resistant packaging. Mechanical test methods for reclosable child resistant packaging systems
BS EN ISO 13129:2012. Paints and varnishes. Electrochemical measurement of the protection provided to steel by paint coatings. Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements
BS EN ISO 13130:2011. Laboratory glassware. Desiccators
BS EN ISO 13132:2011. Laboratory glassware. Petri dishes
BS EN ISO 13138:2012. Air quality. Sampling conventions for airborne particle deposition in the human respiratory system
BS EN ISO 13174:2012. Cathodic protection of harbour installations
BS EN ISO 13212:1999, BS 7208-20:1999. Ophthalmic optics. Contact lens care products. Guidelines for the determination of shelf-life
BS EN ISO 13212:2011. Ophthalmic optics. Contact lens care products. Guidelines for determination of shelf-life
BS EN ISO 13225:2012. Geometrical product specifications (GPS). Dimensional measuring equipment; Height gauges. Design and metrological characteristics
BS EN ISO 13229:2011. Thermoplastics piping systems for non-pressure applications. Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings. Determination of the viscosity number and K-value
BS EN ISO 13230:1999. Ophthalmic optics. Bar code specifications
BS EN ISO 13260:2011. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Test method for resistance to combined temperature cycling and external loading
BS EN ISO 13274:2013. Packaging. Transport packaging for dangerous goods. Plastics compatibility testing for packaging and IBCs
BS EN ISO 13287:2007. Personal protective equipment. Footwear. Test method for slip resistance
BS EN ISO 13287:2012. Personal protective equipment. Footwear. Test method for slip resistance
BS EN ISO 13293:2012. Recreational diving services. Requirements for gas blender training programmes
BS EN ISO 13294:1997. Dental handpieces. Dental air-motors
BS EN ISO 13295:1997. Dental rotary instruments. Mandrels
BS EN ISO 13295:2007. Dentistry. Mandrels for rotary instruments
BS EN ISO 13297:2001. Small craft. Electrical systems. Alternating current installations
BS EN ISO 13297:2012. Small craft. Electrical systems. Alternating current installations
BS EN ISO 13299:2010. Sensory analysis. Methodology. General guidance for establishing a sensory profile
BS EN ISO 13307:2013. Microbiology of food and animal feed. Primary production stage. Sampling techniques
BS EN ISO 13337:1998. Spring-type straight pins. Slotted, light duty
BS EN ISO 13337:2009. Spring-type straight pins. Slotted, light duty
BS EN ISO 13340:2001. Transportable gas cylinders. Cylinder valves for non-refillable cylinders. Specification and prototype testing
BS EN ISO 13341:1998. Transportable gas cylinders. Fitting of valves to gas cylinders
BS EN ISO 13341:2010. Gas cylinders. Fitting of valves to gas cylinders
BS EN ISO 13349:2008, BS 848-8:1999. Fans for general purposesVocabulary and definition of categories
BS EN ISO 13349:2010. Fans. Vocabulary and definitions of categories
BS EN ISO 13350:2008, BS 848-10:1999. Industrial fans. Performance testing of jet fans
BS EN ISO 13351:2008, BS 848-4:1997. Fans for general purposes. Dimensions
BS EN ISO 13351:2009. Fans. Dimensions
BS EN ISO 13355:2003. Packaging. Complete, filled transport packages and unit loads. Vertical random vibration test
BS EN ISO 13356:2013. Implants for surgery. Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)
BS EN ISO 13365:2011. Leather. Chemical tests. Determination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography
BS EN ISO 13366-1:1997. Milk. Enumeration of somatic cellsMicroscopic method
BS EN ISO 13366-1:2008. Milk. Enumeration of somatic cellsMicroscopic method (Reference method)
BS EN ISO 13366-2:1997. Milk. Enumeration of somatic cellsMethod using an electronic particle counter
BS EN ISO 13366-2:2006. Milk. Enumeration of somatic cellsGuidance on the operation of fluoro-opto-electronic counters
BS EN ISO 13366-3:1997. Milk. Enumeration of somatic cellsFluoro-opto-electronic method
BS EN ISO 13370:1998. Thermal performance of buildings. Heat transfer via the ground. Calculation methods
BS EN ISO 13370:2007. Thermal performance of buildings. Heat transfer via the ground. Calculation methods
BS EN ISO 13385-1:2011. Geometrical product specifications (GPS). Dimensional measuring equipmentCallipers. Design and metrological characteristics
BS EN ISO 13385-2:2011. Geometrical product specifications (GPS). Dimensional measuring equipmentCalliper depth gauges. Design and metrological characteristics
BS EN ISO 13395:1996. Water quality. Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection
BS EN ISO 13397-1:1996. Periodontal curettes, dental scalers and excavatorsGeneral requirements
BS EN ISO 13397-2:1997. Periodontal curettes, dental scalers and excavatorsPeriodontal curettes. Gr-type
BS EN ISO 13397-2:2005+A1:2012. Dentistry. Periodontal curettes, dental scalers and excavatorsPeriodontal curettes of Gr-type
BS EN ISO 13397-3:1997. Periodontal curettes, dental scalers and excavatorsDental scalers. H-type
BS EN ISO 13397-4:1998. Periodontal curettes, dental scalers and excavatorsDental excavators. Discoid type
BS EN ISO 13402:2001, BS 7891:1997. Surgical and dental hand instruments. Determination of resistance against autoclaving, corrosion and thermal exposure
BS EN ISO 13406-1:1999. Ergonomic requirements for work with visual display based on flat panelsIntroduction
BS EN ISO 13406-2:2002. Ergonomic requirements for work with visual display based on flat panelsErgonomic requirements for flat panel displays
BS EN ISO 13407:1999. Human-centred design processes for interactive systems
BS EN ISO 13408-1:2011+A1:2013. Aseptic processing of health care productsGeneral requirements
BS EN ISO 13408-2:2011. Aseptic processing of health care productsFiltration
BS EN ISO 13408-3:2011. Aseptic processing of health care productsLyophilization
BS EN ISO 13408-4:2011. Aseptic processing of health care productsClean-in-place technologies
BS EN ISO 13408-5:2011. Aseptic processing of health care productsSterilization in place
BS EN ISO 13408-6:2011+A1:2013. Aseptic processing of health care productsIsolator systems
BS EN ISO 13426-1:2003. Geotextiles and geotextile-related products. Strength of internal structural junctionsGeocells
BS EN ISO 13426-2:2005. Geotextiles and geotextile-related products. Strength of internal structural junctionsGeocomposites
BS EN ISO 13427:1998. Geotextiles and geotextile-related products. Abrasion damage simulation (sliding block test).
BS EN ISO 13428:2005. Geosynthetics. Determination of the protection efficiency of a geosynthetic against impact damage
BS EN ISO 13431:1999. Geotextiles and geotextiles-related products. Determination of tensile creep and creep rupture behaviour
BS EN ISO 13433:2006. Geosynthetics. Dynamic perforation test (cone drop test)
BS EN ISO 13437:1998. Geotextiles and geotextile-related products. Method for installing and extracting samples in soil, and testing specimens in laboratory
BS EN ISO 13438:2004. Geotextiles and geotextile-related products. Screening test method for determining the resistance to oxidation
BS EN ISO 13443:2005. Natural gas. Standard reference conditions
BS EN ISO 13445:2006. Adhesives. Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
BS EN ISO 1346:2004. Fibre ropes. Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity (PP3). 3-, 4- & 8- strand ropes
BS EN ISO 1346:2012. Fibre ropes. Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3). 3-, 4-, 8- and 12-strand ropes
BS EN ISO 13468-1:1997, BS 2782-5:Method 532A:1997. Plastics. Determination of the total luminous transmittance of transparent materialsSingle-beam instrument
BS EN ISO 13468-2:2006. Plastics. Determination of the total luminous transmittance of transparent materialsDouble-beam instrument
BS EN ISO 13473-1:2004. Characterization of pavement texture by use of surface profilesDetermination of mean profile depth
BS EN ISO 13473-5:2009. Characterization of pavement texture by use of surface profilesDetermination of megatexture
BS EN ISO 13477:2008. Thermoplastics pipes for the conveyance of fluids. Determination of resistance to rapid crack propagation (RCP). Small-scale steady-state test (S4 test)
BS EN ISO 13478:1997, BS 2782-11:Method 1109R:1997. Thermoplastics pipes for the conveyance of fluids. Determination of resistance to rapid crack propagation (RCP). Full-scale test
BS EN ISO 13478:2007. Thermoplastics pipes for the conveyance of fluids. Determination of resistance to rapid crack propagation (RCP). Full-scale test (FST)
BS EN ISO 13479:1997, BS 2782-11:Method 1109N:1997. Polyolefin pipes for the conveyance of fluids. Determination of resistance to crack propagation. Test method for slow crack growth on notched pipes (notch test)
BS EN ISO 13479:2009. Polyolefin pipes for the conveyance of fluids. Determination of resistance to crack propagation. Test method for slow crack growth on notched pipes
BS EN ISO 13485:2001. Quality systems. Medical devices. Particular requirements for the application of EN ISO 9001
BS EN ISO 13485:2003. Medical devices. Quality management systems. Requirements for regulatory purposes
BS EN ISO 13485:2012. Medical devices. Quality management systems. Requirements for regulatory purposes
BS EN ISO 13488:2001. Quality systems. Medical devices. Particular requirements for the application of EN ISO 9002
BS EN ISO 13500:1999. Petroleum and natural gas industries. Drilling fluid materials. Specifications and tests
BS EN ISO 13500:2006. Petroleum and natural gas industries. Drilling fluid materials. Specifications and tests
BS EN ISO 13500:2008+A1:2010. Petroleum and natural gas industries. Drilling fluid materials. Specifications and tests
BS EN ISO 13501:2006. Petroleum and natural gas industries. Drilling fluids. Processing systems evaluation
BS EN ISO 13501:2011. Petroleum and natural gas industries. Drilling fluids. Processing equipment evaluation
BS EN ISO 13503-1:2005. Petroleum and natural gas industries. Completion fluids and materialsMeasurement of viscous properties of completion fluids
BS EN ISO 13503-1:2011. Petroleum and natural gas industries. Completion fluids and materialsMeasurement of viscous properties of completion fluids
BS EN ISO 13503-2:2006+A1:2009. Petroleum and natural gas industries. Completion fluids and materialsMeasurement of properties of proppants used in hydraulic fracturing and gravel-packing operations
BS EN ISO 13503-3:2005. Petroleum and natural gas industries. Completion fluids and materialsTesting of heavy brines
BS EN ISO 13503-4:2006. Petroleum and natural gas industries. Completion fluids and materialsProcedure for measuring stimulation and gravel-pack fluid leakoff under static conditions
BS EN ISO 13503-5:2006. Petroleum and natural gas industries. Completion fluids and materialsProcedures for measuring the long term conductivity of proppants
BS EN ISO 13504:2012. Dentistry. General requirements for instruments and related accessories used in dental implant placement and treatment
BS EN ISO 13517:2013. Metallic powders. Determination of flowrate by means of a calibratedfunnel (Gustavsson flowmeter)
BS EN ISO 13533:2002. Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment
BS EN ISO 13534:2001. Petroleum and natural gas industries. Drilling and production equipment. Inspection, maintenance, repair and re-manufacture of hoisting equipment
BS EN ISO 13535:2001. Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment
BS EN ISO 13565-1:1998. Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional propertiesFiltering and general measurement conditions
BS EN ISO 13565-2:1998. Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional propertiesHeight characterization using the linear material ration curve
BS EN ISO 13565-3:2000. Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional propertiesHeight characterization using the material probability curve
BS EN ISO 13567-1:2002. Technical product documentation. Organization and naming of layers for CADOverview and principles
BS EN ISO 13567-2:2002. Technical product documentation. Organization and naming of layers for CADConcepts, format and codes used in construction documentation
BS EN ISO 13585:2012. Brazing. Qualification test of brazers and brazing operators
BS EN ISO 13588:2012. Non-destructive testing of welds. Ultrasonic testing. Use of automated phased array technology
BS EN ISO 13590:2003. Small craft. Personal watercraft. Construction and system installation requirements
BS EN ISO 13606-1:2012. Health informatics. Electronic health record communicationReference model
BS EN ISO 13606-5:2010. Health informatics. Electronic health record communicationInterface specification
BS EN ISO 13624-1:2009. Petroleum and natural gas industries. Drilling and production equipment Design and operation of marine drilling riser equipment
BS EN ISO 13625:2002. Petroleum and natural gas industries. Drilling and production equipment. Marine drilling riser couplings
BS EN ISO 13626:2004. Petroleum and natural gas industries. Drilling and production equipment. Drilling and well-servicing structures
BS EN ISO 13628-1:1999. Petroleum and natural gas industries. Design and operation of subsea production systemsGeneral requirements and recommendations
BS EN ISO 13628-1:2005+A1:2010. Petroleum and natural gas industries. Design and operation of subsea production systemsGeneral requirements and recommendations
BS EN ISO 13628-10:2006. Petroleum and natural gas industries. Design and operation of subseaprod uction systemsSpecification for bonded flexible pipe
BS EN ISO 13628-15:2011. Petroleum and natural gas industries. Design and operation of subsea production systemsSubsea structures and manifolds
BS EN ISO 13628-2:2001. Petroleum and natural gas industries. Design and operation of subsea production systemsFlexible pipe systems for subsea and marine applications
BS EN ISO 13628-2:2006. Petroleum and natural gas industries. Design and operation of subsea production systemsUnbonded flexible pipe systems for subsea and marine applications
BS EN ISO 13628-3:2001. Petroleum and natural gas industries. Design and operation of subsea production systemsThrough flowline (TFL) systems
BS EN ISO 13628-4:1999. Petroleum and natural gas industries. Design and operation of subsea production systemsSubsea wellhead and tree equipment
BS EN ISO 13628-4:2010. Petroleum and natural gas Industries. Design and operation of subsea production systemsSubsea wellhead and tree equipment
BS EN ISO 13628-5:2009. Petroleum and natural gas industries. Design and operation of subsea production systemsSubsea umbilicals
BS EN ISO 13628-6:2006. Petroleum and natural gas industries. Design and operation of subsea production systemsSubsea production control systems
BS EN ISO 13628-7:2006. Petroleum and natural gas industries. Design and operation of subsea production systemsCompletion/workover riser systems
BS EN ISO 13628-8:2006. Petroleum and natural gas industries. Design and operation of subsea production systemsRemotely operated vehicle (ROV) interfaces on subsea production systems
BS EN ISO 13628-9:2006. Petroleum and natural gas industries. Design and operation of subsea production systemsRemotely operated tool (ROT) intervention systems
BS EN ISO 13631:2002. Petroleum and natural gas industries. Packaged reciprocating gas compressors
BS EN ISO 13632:2012. Binders for paints and varnishes. Rosin. Sampling and sample preparation for colour measurement
BS EN ISO 13666:1999. Ophthalmic optics. Spectacle lenses. Vocabulary
BS EN ISO 13666:2012. Ophthalmic optics. Spectacle lenses. Vocabulary
BS EN ISO 13678:2009. Petroleum and natural gas industries. Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements
BS EN ISO 13678:2012. Petroleum and natural gas industries. Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements
BS EN ISO 13679:2006. Petroleum and natural gas industries. Procedures for testing casing and tubing connections
BS EN ISO 13680:2001. Petroleum and natural gas industries. Corrosion- resistant alloy seamless tubes for use as casing, tubing and coupling stock. Technical delivery conditions
BS EN ISO 13680:2008. Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock. Technical delivery conditions
BS EN ISO 13680:2010. Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions
BS EN ISO 13686:2005. Natural gas. Quality designation
BS EN ISO 13686:2013. Natural gas. Quality designation
BS EN ISO 13688:2013. Protective clothing. General requirements
BS EN ISO 13690:2007. Cereals, pulses and milled products. Sampling of static batches
BS EN ISO 13691:2002. Petroleum and natural gas industries. High-speed special-purpose gear units
BS EN ISO 13694:2000. Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam power (energy) density distribution
BS EN ISO 13695:2004. Optics and photonics. Lasers and laser-related equipment. Test methods for the spectral characteristics of lasers
BS EN ISO 13696:2002. Optics and optical instruments. Test methods for radiation scattered by optical components
BS EN ISO 13697:2006. Optics and photonics. Lasers and laser-related equipment. Test methods for specular reflectance and regular transmittance of optical laser components
BS EN ISO 13702:1999. Petroleum and natural gas industries. Control and mitigation of fires and explosions on offshore production installations. Requirements and guidelines
BS EN ISO 13703:2000. Petroleum and natural gas industries. Design and installation of piping systems on offshore production platforms
BS EN ISO 13704:2007. Petroleum, petrochemical and natural gas industries. Calculation of heater-tube thickness in petroleum refineries
BS EN ISO 13705:2002. Petroleum and natural gas industries. Fired heaters for general refinery service
BS EN ISO 13705:2006. Petroleum, petrochemical and natural gas industries. Fired heaters for general refinery service
BS EN ISO 13705:2012. Petroleum, petrochemical and natural gas industries. Fired heaters for general refinery service
BS EN ISO 13706:2000. Petroleum and natural gas industries. Air cooled heat exchangers
BS EN ISO 13706:2005. Petroleum, petrochemical and natural gas industries. Air-cooled heat exchangers
BS EN ISO 13706:2011. Petroleum, petrochemical and natural gas industries. Aircooled heat exchangers
BS EN ISO 13709:2003. Centrifugal pumps for petroleum, petrochemical and natural gas industries
BS EN ISO 13709:2009. Centrifugal pumps for petroleum, petrochemical and natural gas industries
BS EN ISO 13709:2009. Centrifugal pumps for petroleum, petrochemical and natural gas industries CD-ROM
BS EN ISO 13710:2004. Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
BS EN ISO 13716:2000. Dentistry. Reversible-irreversible hydrocolloid impression material systems
BS EN ISO 13720:2010. Meat and meat products. Enumeration of presumptive Pseudomonas spp.
BS EN ISO 13731:2002. Ergonomics of the thermal environment. Vocabulary and symbols
BS EN ISO 13732-1:2006. Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfacesHot surfaces
BS EN ISO 13732-1:2008. Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfacesHot surfaces
BS EN ISO 13732-3:2005. Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfacesCold surfaces
BS EN ISO 13732-3:2008. Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfacesCold surfaces
BS EN ISO 13734:2001. Natural gas. Organic sulfur compounds used as odorants. Requirements and test methods
BS EN ISO 13736:1998, BS 2000-170:1998. Petroleum products and other liquids. Determination of flash point. Abel closed cup method
BS EN ISO 13736:2008. Determination of flash point. Abel closed-cup method
BS EN ISO 13736:2013, BS 2000-170:2013. Determination of flash point. Abel closed-cup method
BS EN ISO 13753:1999. Mechanical vibration and shock. Hand-arm vibration. Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system
BS EN ISO 13753:2008. Mechanical vibration and shock. Hand-arm vibration. Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system
BS EN ISO 13757:1996, BS 2000-427:1996,ISO 13757:1996. Methods of test for petroleum and its products. Liquefied petroleum gases. Determination of oily residues. High temperature method
BS EN ISO 13758:1997, BS 2000-395:1997,ISO 13758:1996. Methods of test for petroleum and its products. Liquefied petroleum gases. Assessment of the dryness of propane. Valve freeze method
BS EN ISO 13759:1997, BS 2000-430:1997,ISO 13759:1996. Methods of test for petroleum and its products. Petroleum products. Determination of alkyl nitrate in diesel fuels. Spectrometric method
BS EN ISO 13760:2000, BS 2782-11:Method 1120M:2000. Plastics pipes for the conveyance of fluids under pressure. Miner's rule. Calculation method for cumulative damage
BS EN ISO 13769:2006. Gas cylinders. Stamp marking
BS EN ISO 13769:2009. Gas cylinders. Stamp marking
BS EN ISO 13783:1998, BS 2782-11:Method 1123C:1998. Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints. Test method for leaktightness and strength while subjected to bending and internal pressure
BS EN ISO 13786:1999. Thermal performance of building components. Dynamic thermal characteristics. Calculation methods
BS EN ISO 13786:2007. Thermal performance of building components. Dynamic thermal characteristics. Calculation methods
BS EN ISO 13787:2003. Thermal insulation products for building equipment and industrial installations. Determination of declared thermal conductivity
BS EN ISO 13788:2002. Hygrothermal performance of building components and building elements. Internal surface temperature to avoid critical surface humidity and interstitial condensation. Calculation methods
BS EN ISO 13788:2012. Hygrothermal performance of building components and building elements. Internal surface temperature to avoid critical surface humidity and interstitial condensation. Calculation methods
BS EN ISO 13789:1999. Thermal performance of buildings. Transmission heat loss coefficient. Calculation method
BS EN ISO 13789:2007. Thermal performance of buildings. Transmission and ventilation heat transfer coefficients. Calculation method
BS EN ISO 13790:2004. Thermal performance of buildings. Calculation of energy use for space heating
BS EN ISO 13790:2008. Energy performance of buildings. Calculation of energy use for space heating and cooling
BS EN ISO 13791:2004. Thermal performance of buildings. Calculation of internal temperatures of a room in summer without mechanical cooling. General criteria and validation procedures
BS EN ISO 13791:2012. Thermal performance of buildings. Calculation of internal temperatures of a room in summer without mechanical cooling. General criteria and validation procedures
BS EN ISO 13792:2005. Thermal performance of buildings. Calculation of internal temperatures of a room in summer without mechanical cooling. Simplified methods
BS EN ISO 13792:2012. Thermal performance of buildings. Calculation of internal temperatures of a room in summer without mechanical cooling. Simplified methods
BS EN ISO 13793:2001. Thermal performance of buildings. Thermal design of foundations to avoid frost heave
BS EN ISO 13802:2006. Plastics. Verification of pendulum impact-testing machines. Charpy, Izod and tensile impact-testing
BS EN ISO 13803:2004, BS 3900-D13:2000. Paints and varnishes. Determination of reflection haze on paint films at 20 degrees
BS EN ISO 13805:2009. Vitreous and porcelain enamels for aluminium. Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
BS EN ISO 13807:2009. Vitreous and porcelain enamels. Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry
BS EN ISO 13819-1:1998. Petroleum and natural gas industries. Offshore structuresGeneral requirements
BS EN ISO 13833:2013. Stationary source emissions. Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide. Radiocarbon sampling and determination
BS EN ISO 13844:2000, BS 2782-11: Method 1123D:2000. Plastics piping systems. Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes. Test method for leaktightness under negative pressure
BS EN ISO 13845:2000, BS 2782-11: Method 1123E:2000. Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes. Test method for leaktightness under internal pressure and with angular deflection
BS EN ISO 13846:2001, BS 2782-11:Method 1111F:2000. Plastics piping systems. End-load-bearing and non-end-load bearing assemblies and joints for thermoplastics pressure piping. Test method for long-term leaktightness under internal water pressure
BS EN ISO 13849-1:2006. Safety of machinery. Safety-related parts of control systemsGeneral principles for design
BS EN ISO 13849-1:2008. Safety of machinery. Safety-related parts of control systemsGeneral principles for design
BS EN ISO 13849-2:2003. Safety of machinery. Safety-related parts of control systemsValidation
BS EN ISO 13849-2:2008. Safety of machinery. Safety-related parts of control systemsValidation
BS EN ISO 13849-2:2012. Safety of machinery. Safety-related parts of control systemsValidation
BS EN ISO 13850:2006. Safety of machinery. Emergency stop. Principles for design
BS EN ISO 13850:2008. Safety of machinery. Emergency stop. Principles for design
BS EN ISO 13855:2010. Safety of machinery. Positioning of safeguards with respect to the approach speeds of parts of the human body
BS EN ISO 13856-1:2013. Safety of machinery. Pressure-sensitive protective devicesGeneral principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
BS EN ISO 13856-2:2013. Safety of machinery. Pressure-sensitive protective devicesGeneral principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
BS EN ISO 13856-3:2013. Safety of machinery. Pressure-sensitive protective devicesGeneral principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
BS EN ISO 13857:2008. Safety of machinery. Safety distances to prevent hazard zones being reached by upper and lower limbs
BS EN ISO 13884:2005. Animal and vegetable fats and oils. Determination of isolated trans isomers by infrared spectrometry
BS EN ISO 13897:2004. Dentistry. Amalgam capsules
BS EN ISO 139:2005+A1:2011. Textiles. Standard atmospheres for conditioning and testing
BS EN ISO 13900:2002. Steel. Determination of boron content. Curcumin spectrophotometric method after distillation
BS EN ISO 13903:2005. Animal feeding stuffs. Determination of amino acids content
BS EN ISO 13904:2005. Animal feeding stuffs. Determination of tryptophan content
BS EN ISO 13906:2008. Animal feeding stuffs. Determination of acid detergent fibre (ADF) and acid detergent lignin (ADL) contents
BS EN ISO 13916:1997. Welding. Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
BS EN ISO 13918:1998. Welding. Studs and ceramic ferrules for arc stud welding
BS EN ISO 13918:2008. Welding. Studs and ceramic ferrules for arc stud welding
BS EN ISO 13919-1:1997. Welding. Electron and laser beam welded joints. Guidance on quality levels for imperfectionsSteel
BS EN ISO 13919-2:2001. Welding. Electron and laser beam welded joints. Guidance on quality levels for imperfectionsAluminium and its weldable alloys
BS EN ISO 13920:1997. Welding. General tolerances for welded constructions. Dimensions for lengths and angles. Shape and position
BS EN ISO 13927:2003. Plastics. Simple heat release test using a conical radiant heater and a thermopile detector
BS EN ISO 13929:2001. Small craft. Steering gear. Geared link systems
BS EN ISO 13934-1:1999. Textiles. Tensile properties of fabricsDetermination of maximum force and elongation at maximum force using the strip method
BS EN ISO 13934-1:2013. Textiles. Tensile properties of fabricsDetermination of maximum force and elongation at maximum force using the strip method
BS EN ISO 13934-2:1999. Textiles. Tensile properties of fabricsDetermination of maximum force using the grab method
BS EN ISO 13935-1:1999. Textiles. Seam tensile properties of fabrics and made-up textile articlesDetermination of maximum force to seam rupture using the strip method
BS EN ISO 13935-2:1999. Textiles. Seam tensile properties of fabrics and made-up textile articlesDetermination of maximum force to seam rupture using the grab method
BS EN ISO 13936-3:2007. Textiles. Determination of the slippage resistance of yarns at a seam in woven fabricsNeedle clamp method
BS EN ISO 13937-1:2000. Textiles. Tear properties of fabricsDetermination of tear force using ballistic pendulum method (Elmendorf)
BS EN ISO 13937-2:2000. Textiles. Tear properties of fabricsDetermination of tear force of trouser-shaped test specimens (single tear method)
BS EN ISO 13937-3:2000. Textiles. Tear properties of fabricsDetermination of tear force of wing-shaped test specimens (single tear method)
BS EN ISO 13937-4:2000. Textiles. Tear properties of fabricsDetermination of tear force of tongue-shaped test specimens (double tear test)
BS EN ISO 13938-1:1999. Textiles. Bursting properties of fabricsHydraulic method for determination of bursting strength and bursting distension
BS EN ISO 13938-2:1999. Textiles. Bursting properties of fabricsPneumatic method for determination of bursting strength and bursting distension
BS EN ISO 13943:2000. Fire safety. Vocabulary
BS EN ISO 13943:2010. Fire safety. Vocabulary
BS EN ISO 13944:2006. Lubricated metal-powder mixes. Determination of lubricant content. Modified Soxhlet extraction method
BS EN ISO 13944:2012. Lubricated metal-powder mixes. Determination of lubricant content. Soxhlet extraction method
BS EN ISO 13967:2009. Thermoplastics fittings. Determination of ring stiffness
BS EN ISO 13968:2008. Plastics piping and ducting systems. Thermoplastics pipes. Determination of ring flexibility
BS EN ISO 13969:2004. Milk and milk products. Guidelines for a standardized description of microbial inhibitor tests
BS EN ISO 13982-1:2004+A1:2010. Protective clothing for use against solid particulatesPerformance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
BS EN ISO 13982-2:2004. Protective clothing for use against solid particulatesTest method of determination of inward leakage of aerosols of fine particles into suits
BS EN ISO 13995:2001. Protective clothing. Mechanical properties. Test method for the determination of the resistance to puncture and dynamic tearing of materials
BS EN ISO 13997:1999. Protective clothing. Mechanical properties. Determination of resistance to cutting by sharp objects
BS EN ISO 13998:2003. Protective clothing. Aprons, trousers and vests protecting against cuts and stabs by hand knives
BS EN ISO 14001:1996
BS EN ISO 14001:1996. Environmental management systems. Specification with guidance for use
BS EN ISO 14001:1996. Environmental management systems. Specification with guidance for use
BS EN ISO 14001:2004. Environmental management systems. Requirements with guidance for use
BS EN ISO 14004:2010. Environmental management systems. General guidelines on principles, systems and support techniques
BS EN ISO 14006:2011. Environmental management systems. Guidelines for incorporating ecodesign
BS EN ISO 140-1:1998. Acoustics. Measurement of sound insulation in buildings and of building elementsRequirements for laboratory test facilities with suppressed flanking transmission
BS EN ISO 1401:2000. Rubber hoses for agricultural spraying
BS EN ISO 14010:1996. Guidelines for environmental auditing. General principles
BS EN ISO 14011:1996. Guidelines for environmental auditing. Audit procedures. Auditing of environmental management systems
BS EN ISO 140-11:2005. Acoustics. Measurement of sound insulation in buildings and of building elementsLaboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors
BS EN ISO 14012:1996. Guidelines for environmental auditing. Qualification criteria for environmental auditors
BS EN ISO 140-12:2000. Acoustics. Measurement of sound insulation in buildings and of building elementsLaboratory measurement of room-to-room airborne and impact sound insulation of an access floor
BS EN ISO 140-14:2004. Acoustics. Measurement of sound insulation in buildings and of building elementsGuidelines for special situations in the field
BS EN ISO 14015:2010. Environmental management. Environmental assessment of sites and organizations (EASO)
BS EN ISO 140-16:2006. Acoustics. Measurement of sound insulation in buildings and of building elementsLaboratory measurement of the sound reduction index improvement by additional lining
BS EN ISO 140-18:2006. Acoustics. Measurement of sound insulation in buildings and of building elementsLaboratory measurement of sound generated by rainfall on building elements
BS EN ISO 1402:1997. Rubber and plastics hoses and hose assemblies. Hydrostatic testing
BS EN ISO 1402:2009. Rubber and plastics hoses and hose assemblies. Hydrostatic testing
BS EN ISO 14020:2001. Environmental labels and declarations. General principles
BS EN ISO 14021:2001+A1:2011. Environmental labels and declarations. Self-declared environmental claims (Type II environmental labelling)
BS EN ISO 14024:2001. Environmental labels and declarations. Type I environmental labelling. Principles and procedures
BS EN ISO 14025:2010. Environmental labels and declarations. Type III environmental declarations. Principles and procedures
BS EN ISO 140-3:1995, BS 2750-3:1995. Acoustics. Measurement of sound insulation in buildings and of building elementsLaboratory measurement of airborne sound insulation of building elements
BS EN ISO 1403:1997. Rubber hoses, textile-reinforced, for general-purpose water applications. Specification
BS EN ISO 1403:2008. Rubber hoses, textile-reinforced, for general-purpose water applications. Specification
BS EN ISO 14031:2000. Environmental management. Environmental performance evaluation. Guidelines
BS EN ISO 14031:2013. Environmental management. Environmental performance evaluation. Guidelines
BS EN ISO 140-4:1998. Acoustics. Measurement of sound insulation in buildings and of building elementsField measurements of airborne sound insulation between rooms
BS EN ISO 14040:1997. Environmental management. Life cycle assessment. Principles and framework
BS EN ISO 14040:2006. Environmental management. Life cycle assessment. Principles and framework
BS EN ISO 14041:1998. Environmental management. Life cycle assessment. Goal and scope definition and inventory analysis
BS EN ISO 14042:2000. Environmental management. Life cycle management. Life cycle impact assessment
BS EN ISO 14043:2000. Environmental management. Life cycle assessment. Life cycle interpretation
BS EN ISO 14044:2006. Environmental management. Life cycle assessment. Requirements and guidelines
BS EN ISO 14045:2012. Environmental management. Eco-efficiency assessment of product systems. Principles, requirements and guidelines
BS EN ISO 140-5:1998. Acoustics. Measurement of sound insulation in buildings and of building elementsField measurements of airborne sound insulation of facade elements and facades
BS EN ISO 14050:2010. Environmental management. Vocabulary
BS EN ISO 14051:2011. Environmental management. Material flow cost accounting. General framework
BS EN ISO 140-6:1998. Acoustics. Measurement of sound insulation in buildings and of building elementsLaboratory measurements of impact sound insulation of floors
BS EN ISO 14063:2010. Environmental management. Environmental communication. Guidelines and examples
BS EN ISO 14064-1:2012. Greenhouse gasesSpecification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals
BS EN ISO 14064-2:2012. Greenhouse gasesSpecification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements
BS EN ISO 14064-3:2012. Greenhouse gasesSpecification with guidance for the validation and verification of greenhouse gas assertions
BS EN ISO 14065:2012. Greenhouse gases. Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
BS EN ISO 14065:2013. Greenhouse gases. Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
BS EN ISO 140-7:1998. Acoustics. Measurement of sound insulation in buildings and of building elementsField measurements of impact sound insulation of floors
BS EN ISO 140-8:1998. Acoustics. Measurement of sound insulation in buildings and of building elementsLaboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor
BS EN ISO 14087:2011. Leather. Physical and mechanical tests. Determination of bending force
BS EN ISO 14088:2012. Leather. Chemical tests. Quantitative analysis of tanning agents by filter method
BS EN ISO 14111:1999, BS 3156-11.0.3:1999. Natural gas. Guidelines to traceability in analysis
BS EN ISO 14113:1997. Gas welding equipment. Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar
BS EN ISO 14113:2008. Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
BS EN ISO 14114:1999. Gas welding equipment. Acetylene manifold systems for welding, cutting and allied processes. General requirements
BS EN ISO 14116:2008. Protective clothing. Protection against heat and flame. Limited flame spread materials, material assemblies and clothing
BS EN ISO 14119:2013. Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
BS EN ISO 14121-1:2007. Safety of machinery. Risk assessmentPrinciples
BS EN ISO 14122-1:2001+A1:2010. Safety of machinery. Permanent means of access to machineryChoice of a fixed means of access between two levels
BS EN ISO 14122-2:2001+A1:2010. Safety of machinery. Permanent means of access to machineryWorking platforms and walkways
BS EN ISO 14122-3:2001+A1:2010. Safety of machinery. Permanent means of access to machineryStairways, stepladders and guard-rails
BS EN ISO 14122-4:2004+A1:2010. Safety of machinery. Permanent means of access to machineryFixed ladders
BS EN ISO 14125:1998+A1:2011. Fibre-reinforced plastic composites. Determination of flexural properties
BS EN ISO 14126:1999. Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction
BS EN ISO 14129:1998. Fibre-reinforced plastic composites. Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the ± 45° tension test method
BS EN ISO 14130:1998. Fibre-reinforced plastic composites. Determination of apparent interlaminar shear strength by short-beam method
BS EN ISO 14155:2011. Clinical investigation of medical devices for human subjects. Good clinical practice
BS EN ISO 14155-1:2003. Clinical investigation of medical devices for human subjectsGeneral requirements
BS EN ISO 14155-1:2009. Clinical investigation of medical devices for human subjectsGeneral requirements
BS EN ISO 14155-2:2003. Clinical investigation of medical devices for human subjectsClinical investigation plans
BS EN ISO 14155-2:2009. Clinical investigation of medical devices for human subjectsClinical investigation plans
BS EN ISO 14159:2004. Safety of machinery. Hygiene requirements for the design of machinery
BS EN ISO 14159:2008. Safety of machinery. Hygiene requirements for the design of machinery
BS EN ISO 14160:1998. Sterilization of single-use medical devices incorporating materials of animal origin. Validation and routine control of sterilization by liquid chemical sterilants
BS EN ISO 14160:2011. Sterilization of health care products. Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives. Requirements for characterization, development, validation and routine control of a sterilization process for medical devices
BS EN ISO 14161:2001. Sterilization of health care products. Biological indicators. Guidance for the selection, use and interpretation of results
BS EN ISO 14161:2009. Sterilization of health care products. Biological indicators. Guidance for the selection, use and interpretation of results
BS EN ISO 14163:1998. Acoustics. Guidelines for noise control by silencers
BS EN ISO 14171:2010. Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels. Classification
BS EN ISO 14172:2003. Welding consumables. Covered electrodes for manual metal arc welding of nickel and nickel alloys. Classification
BS EN ISO 14172:2008. Welding consumables. Covered electrodes for manual metal arc welding of nickel and nickel alloys. Classification
BS EN ISO 14174:2012. Welding consumables. Fluxes for submerged arc welding and electroslag welding. Classification
BS EN ISO 14175:2008. Welding consumables. Gases and gas mixtures for fusion welding and allied processes
BS EN ISO 14182:2000, BS 5766-20:2000. Animal feeding stuff. Determination of residues of organophosphorus pesticides. Gas chromatographic method
BS EN ISO 14183:2008. Animal feeding stuffs. Determination of monensin, narasin and salinomycin contents. Liquid chromatographic method using post-column derivatization
BS EN ISO 14184-1:1999. Textiles. Determination of formaldehydeFree and hydrolyzed formaldehyde (water extraction method)
BS EN ISO 14184-1:2011. Textiles. Determination of formaldehydeFree and hydrolised formaldehyde (water extraction method)
BS EN ISO 14184-2:1998. Textiles. Determination of formaldehydeReleased formaldehyde (vapour absorption method)
BS EN ISO 14184-2:2011. Textiles. Determination of formaldehydeReleased formaldehyde (vapour absorption method)
BS EN ISO 1421:1998. Rubber- or plastics-coated fabrics. Determination of tensile strength and elongation at break
BS EN ISO 14224:2006. Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment
BS EN ISO 14233:2003. Dentistry. Polymer-based die materials
BS EN ISO 14240-1:2011, ISO 14240-1:1997. Soil quality. Determination of soil microbial biomassSubstrate-induced respiration method
BS EN ISO 14240-2:2011. Soil quality. Determination of soil microbial biomassFumigation-extraction method
BS EN ISO 14245:2010. Gas cylinders. Specifications and testing of LPG cylinder valves. Self-closing
BS EN ISO 14246:2001. Transportable gas cylinders. Gas cylinder valves. Manufacturing tests and inspections
BS EN ISO 14253-1:1999. Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipmentDecision rules for proving conformance or non-conformance with specifications
BS EN ISO 14253-1:2013. Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipmentDecision rules for proving conformity or nonconformity with specification
BS EN ISO 14253-2:2011. Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipmentGuidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
BS EN ISO 14253-3:2011. Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipmentGuidelines for achieving agreements on measurement uncertainty statements
BS EN ISO 14254:2011. Soil quality. Determination of exchangeable acidity in barium chloride extracts
BS EN ISO 14257:2001. Acoustics. Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance
BS EN ISO 14268:2002. Leather. Physical and mechanical tests. Determination of water vapour permeability
BS EN ISO 14268:2012. Leather. Physical and mechanical tests. Determination of water vapour permeability
BS EN ISO 14270:2001. Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
BS EN ISO 14271:2001. Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness)
BS EN ISO 14271:2011. Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
BS EN ISO 14272:2001. Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds
BS EN ISO 14273:2001. Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds
BS EN ISO 14284:2002. Steel and iron. Sampling and preparation of samples for the determination of chemical composition
BS EN ISO 14310:2002. Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs
BS EN ISO 14310:2008. Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs
BS EN ISO 14314:2004. Reciprocating internal combustion engines. Recoil starting equipment. General safety requirements
BS EN ISO 14314:2009. Reciprocal internal combustion engines. Recoil starting equipment. General safety requirements
BS EN ISO 14323:2006. Resistance spot welding and projection welds. Destructive testing of welds. Specimen dimensions and procedure for impact shear test and cross-tension testing
BS EN ISO 14324:2003. Resistance spot welding. Destructive tests of welds. Method for the fatigue testing of spot welded joints
BS EN ISO 14327:2004. Resistance welding. Procedures for determining the weldability lobe for resistance spot, projection and seam welding
BS EN ISO 14329:2003. Resistance welding. Destructive tests of welds. Failure types and geometric measurements for resistance spot, seam and projection welds
BS EN ISO 14341:2008. Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification
BS EN ISO 14341:2011. Welding consumables. Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification
BS EN ISO 14343:2007. Welding consumables. Wire electrodes, strip electrodes, wires and rods for fusion welding of stainless and heat resisting steels. Classification
BS EN ISO 14343:2009. Welding consumables. Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels. Classification
BS EN ISO 14344:2005. Welding and allied processes. Flux and gas shielded electrical welding processes. Procurement guidelines for consumables
BS EN ISO 14344:2010. Welding consumables. Procurement of filler materials and fluxes
BS EN ISO 14356:2003. Dentistry. Duplicating material
BS EN ISO 14372:2001. Welding consumables. Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
BS EN ISO 14372:2011. Welding consumables. Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
BS EN ISO 14373:2007. Resistance welding. Procedure for spot welding of uncoated and coated low carbon steels
BS EN ISO 14402:1999, BS 6068-2.68:1999. Water quality. Determination of phenol index by flow analysis (FIA and CFA)
BS EN ISO 14403:2002, BS 6068-2.75:2002. Water quality. Determination of total cyanide and free cyanide by continuous flow analysis
BS EN ISO 14403-1:2012. Water quality. Determination of total cyanide and free cyanide using flow analysis (FIA and CFA)Method using flow injection analysis (FIA)
BS EN ISO 14403-2:2012. Water quality. Determination of total cyanide and free cyanide using flow analysis (FIA and CFA)Method using continuous flow analysis (CFA)
BS EN ISO 14405-1:2010. Geometrical product specifications (GPS). Dimensional tolerancingLinear sizes
BS EN ISO 14405-2:2011. Geometrical product specifications (GPS). Dimensional tolerancingDimensions other than linear sizes
BS EN ISO 14406:2010. Geometrical product specifications (GPS). Extraction
BS EN ISO 14408:2005. Tracheal tubes designed for laser surgery. Requirements for marking and accompanying information
BS EN ISO 14408:2009. Tracheal tubes designed for laser surgery. Requirements for marking and accompanying information
BS EN ISO 14419:1999. Textiles. Oil repellency. Hydrocarbon resistance test
BS EN ISO 14419:2010. Textiles. Oil repellency. Hydrocarbon resistance test
BS EN ISO 14438:2002. Glass in building. Determination of energy balance value. Calculation method
BS EN ISO 14446:2010. Binders for paints and varnishes. Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions
BS EN ISO 14451-1:2013. Pyrotechnic articles. Pyrotechnic articles for vehiclesTerminology
BS EN ISO 14451-10:2013. Pyrotechnic articles. Pyrotechnic articles for vehiclesRequirements and categorization for semi-finished products
BS EN ISO 14451-2:2013. Pyrotechnic articles. Pyrotechnic articles for vehiclesTest methods
BS EN ISO 14451-3:2013. Pyrotechnic articles. Pyrotechnic articles for vehiclesLabelling
BS EN ISO 14451-4:2013. Pyrotechnic articles. Pyrotechnic articles for vehiclesRequirements and categorization for micro gas generators
BS EN ISO 14451-5:2013. Pyrotechnic articles. Pyrotechnic articles for vehiclesRequirements and categorization for airbag gas generators
BS EN ISO 14451-6:2013. Pyrotechnic articles. Pyrotechnic articles for vehiclesRequirements and categorization for airbag modules
BS EN ISO 14451-7:2013. Pyrotechnic articles. Pyrotechnic articles for vehiclesRequirements and categorization for seatbelt pretensioners
BS EN ISO 14451-8:2013. Pyrotechnic articles. Pyrotechnic articles for vehiclesRequirements and categorization for igniters
BS EN ISO 14451-9:2013. Pyrotechnic articles. Pyrotechnic articles for vehiclesRequirements and categorization for actuators
BS EN ISO 14453:2000. Pulps. Determination of acetone-soluble matter
BS EN ISO 14457:2012. Dentistry. Handpieces and motors
BS EN ISO 14460:1999. Protective clothing for automobile racing drivers. Protection against heat and flame. Performance requirements and test methods
BS EN ISO 14501:2007. Milk and milk powder. Determination of aflatoxin M1 content. Clean-up by immunoaffinity chromatography and determination by high-performance liquid chromatography
BS EN ISO 14505-2:2006. Ergonomics of the thermal environment. Evaluation of thermal environments in vehiclesDetermination of equivalent temperature
BS EN ISO 14505-3:2006. Ergonomics of the thermal environment. Evaluation of thermal environments in vehiclesEvaluation of thermal comfort using human subjects
BS EN ISO 14509:2001. Small craft. Measurement of airborne sound emitted by powered recreational craft
BS EN ISO 14509-1:2008. Small craft. Airborne sound emitted by powered recreational craftPass-by measurement procedures
BS EN ISO 14509-2:2006. Small craft. Airborne sound emitted by powered recreational craftSound assessment using reference craft
BS EN ISO 14509-3:2009. Small craft. Airborne sound emitted by powered recreational craftSound assessment using calculation and measurement procedures
BS EN ISO 1452-1:2009. Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U)General
BS EN ISO 1452-2:2009. Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U)Pipes
BS EN ISO 1452-3:2009. Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U)Fittings
BS EN ISO 1452-3:2010. Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U)Fittings
BS EN ISO 1452-4:2009. Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U)Valves
BS EN ISO 1452-5:2009. Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U)Fitness for purpose of the system
BS EN ISO 14526-1:2000. Plastics. Phenolic powder moulding compounds (PF-PMCs)Designation system and basis for specifications
BS EN ISO 14526-2:2000. Plastics. Phenolic powder moulding compounds (PF-PMCs)Preparation of test specimens and determination of properties
BS EN ISO 14526-3:2000. Plastics. Phenolic powder moulding compounds (PF-PMCs)Requirements for selected moulding compounds
BS EN ISO 14527-1:2000. Plastics. Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs)Designation system and basis for specifications
BS EN ISO 14527-2:2000. Preparation of test specimens and determination of properties
BS EN ISO 14527-3:2000. Plastics. Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs)Requirements for selected moulding compounds
BS EN ISO 14528-1:2000. Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs)Designation system and basis for specifications
BS EN ISO 14528-2:2000. Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs)Preparation of test specimens and determination of properties
BS EN ISO 14528-3:2000. Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs)Requirements for selected moulding compounds
BS EN ISO 14529-1:2000. Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs)Designation system and basis for specifications
BS EN ISO 14529-2:2000. Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs)Preparation of test specimens and determination of properties
BS EN ISO 14529-3:2000. Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs)Requirements for selected moulding compounds
BS EN ISO 14530-1:2000. Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs)Designation system and basis for specifications
BS EN ISO 14530-2:2000. Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs)Preparation of test specimens and determination of properties
BS EN ISO 14530-3:2000. Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs)Requirements for selected moulding compounds
BS EN ISO 14532:2005. Natural gas. Vocabulary
BS EN ISO 14534:1998, BS 7208-17:1998. Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements
BS EN ISO 14534:2002. Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements
BS EN ISO 14534:2009. Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements
BS EN ISO 14534:2011. Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements
BS EN ISO 14539:2001. Manipulating industrial robots. Object handling with grasp-type grippers. Vocabulary and presentation of characteristics
BS EN ISO 14554-1:2001. Quality requirements for welding. Resistance welding of metallic materialsComprehensive quality requirements
BS EN ISO 14554-2:2001. Quality requirements for welding. Resistance welding of metallic materialsElementary quality requirements
BS EN ISO 14555:1998. Welding. Arc stud welding of metallic materials
BS EN ISO 14555:2006. Welding. Arc stud welding of metallic materials
BS EN ISO 14556:2000. Steel. Charpy V-notch pendulum impact test. Instrumented test method
BS EN ISO 14557:2002+A1:2007. Fire-fighting hoses. Rubber and plastics suction hoses and hose assemblies
BS EN ISO 1456:2009. Metallic and other inorganic coatings. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
BS EN ISO 14565:2001, BS 5766-26:2001. Animal feeding stuffs. Determination of vitamin A content. Method using high-performance liquid chromatography
BS EN ISO 14577-1:2002. Metallic materials. Instrumented indentation test for hardness and materials parametersTest method
BS EN ISO 14577-2:2002. Metallic materials. Instrumented indentation test for hardness and materials parametersVerification and calibration of testing machines
BS EN ISO 14577-3:2002. Metallic materials. Instrumented indentation test for hardness and materials parametersCalibration of reference blocks
BS EN ISO 14577-4:2007. Metallic materials. Instrumented indentation test for hardness and materials parametersTest method for metallic and non-metallic coatings
BS EN ISO 14579:2001. Hexalobular socket head cap screws
BS EN ISO 14579:2011. Hexalobular socket head cap screws
BS EN ISO 14580:2001. Hexalobular socket cheese head screws
BS EN ISO 14580:2011. Hexalobular socket cheese head screws
BS EN ISO 14581:2013. Fasteners. Hexalobular socket countersunk flat head screws
BS EN ISO 14582:2013. Fasteners. Hexalobular socket countersunk head screws, high head
BS EN ISO 14583:2001. Hexalobular socket pan head screws
BS EN ISO 14583:2011. Hexalobular socket pan head screws
BS EN ISO 14584:2001. Hexalobular socket raised countersunk head screws
BS EN ISO 14584:2011. Hexalobular socket raised countersunk head screws
BS EN ISO 14585:2001. Hexalobular socket pan head tapping screws
BS EN ISO 14585:2011. Hexalobular socket pan head tapping screws
BS EN ISO 14586:2001. Hexalobular socket countersunk head tapping screws
BS EN ISO 14586:2011. Hexalobular socket countersunk head tapping screws
BS EN ISO 14587:2001. Hexalobular socket raised countersunk (oval) head tapping screws
BS EN ISO 14587:2011. Hexalobular socket raised countersunk (oval) head tapping screws
BS EN ISO 14588:2001. Blind rivets. Terminology and definitions
BS EN ISO 14589:2001. Blind rivets. Mechanical testing
BS EN ISO 14593:2005, BS 6068-5.23:1999. Water quality. Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium. Method by analysis of inorganic carbon in sealed vessels (CO2 headspace test)
BS EN ISO 14596:1998, BS 2000-447:1998. Methods of test for petroleum and its products. Determination of sulfur content. Wavelength-dispersive X-ray fluorescence spectrometry
BS EN ISO 14596:2007, BS 2000-447:2007. Petroleum products. Determination of sulfur content. Wavelength-dispersive X-ray fluorescence spectrometry
BS EN ISO 14597:1999, BS 2000-433:1999. Petroleum products. Determination of vanadium and nickel content. Wavelength-dispersive X-ray fluorescence spectrometry
BS EN ISO 1460:1995. Metallic coatings. Hot dip galvanized coatings on ferrous materials. Gravimetric determination of the mass per unit area
BS EN ISO 14602:1998. Non-active surgical implants. Implants for osteosynthesis. Particular requirements
BS EN ISO 14602:2009. Non-active surgical implants. Implants for Osteosynthesis. Particular requirements
BS EN ISO 14602:2010. Non-active surgical implants. Implants for osteosynthesis. Particular requirements
BS EN ISO 14602:2011. Non-active surgical implants. Implants for osteosynthesis. Particular requirements
BS EN ISO 14607:2007. Non-active surgical implants. Mammary implants. Particular requirements
BS EN ISO 14607:2009. Non-active surgical implants. Mammary implants. Particular requirements
BS EN ISO 1461:1999. Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods
BS EN ISO 1461:2009. Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods
BS EN ISO 14616:2004. Plastics. Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures. Determination of the shrinkage stress and contraction stress
BS EN ISO 1462:1995. Metallic coatings. Coatings other than those anodic to the basis metal. Accelerated corrosion tests. Method for the evaluation of results
BS EN ISO 14620-1:2002. Space systems. Safety requirementsSystem safety
BS EN ISO 1463:1995. Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
BS EN ISO 1463:2004. Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
BS EN ISO 14630:1998. General requirements for non-active surgical implants
BS EN ISO 14630:2005. Non-active surgical implants. General requirements
BS EN ISO 14630:2008. Non-active surgical implants. General requirements
BS EN ISO 14630:2009. Non-active surgical implants. General requirements
BS EN ISO 14630:2012. Non-active surgical implants. General requirements
BS EN ISO 14631:1999. Extruded sheets of impact-modified polystyrene (PS-I). Requirements and test methods
BS EN ISO 14632:1999. Extruded sheets of polyethylene (PE-HD). Requirements and test methods
BS EN ISO 14637:2006. Milk. Determination of urea content. Enzymatic method using difference in pH (Reference method)
BS EN ISO 14644-1:1999. Cleanrooms and associated controlled environmentsClassification of air cleanliness
BS EN ISO 14644-10:2013. Cleanrooms and associated controlled environmentsClassification of surface cleanliness by chemical concentration
BS EN ISO 14644-2:2000. Cleanrooms and associated controlled environmentsSpecifications for testing and monitoring to prove continued compliance with ISO 14644-1
BS EN ISO 14644-3:2005. Cleanrooms and associated controlled environmentsTest methods
BS EN ISO 14644-4:2001. Cleanrooms and associated controlled environmentsDesign, construction and start-up
BS EN ISO 14644-5:2004. Cleanrooms and associated controlled environmentsOperations
BS EN ISO 14644-6:2007. Cleanrooms and associated controlled environmentsVocabulary
BS EN ISO 14644-7:2004. Cleanrooms and associated controlled environmentsSeparative devices (clean air hoods, gloveboxes, isolators and mini-environments)
BS EN ISO 14644-8:2006. Cleanrooms and associated controlled environmentsClassification of airborne molecular contamination
BS EN ISO 14644-8:2013. Cleanrooms and associated controlled environmentsClassification of air cleanliness by chemical concentration (ACC)
BS EN ISO 14644-9:2012. Cleanrooms and associated controlled environmentsClassification of surface cleanliness by particle concentration
BS EN ISO 14660-1:2000. Geometrical product specifications (GPS). Geometrical featuresGeneral terms and definitions
BS EN ISO 14660-2:2000. Geometrical product specifications (GPS). Geometrical featuresExtracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
BS EN ISO 14663-1:2006. Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 14663-2:2006. Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 14673-1:2001. Milk and milk products. Determination of nitrate and nitrite contentsMethod using cadmium reduction and spectrometry
BS EN ISO 14673-1:2004. Milk and milk products. Determination of nitrate and nitrite contentsMethod using cadmium reduction and spectrometry
BS EN ISO 14673-2:2001. Milk and milk products. Determination of nitrate and nitrite contentsMethod using segmented flow analysis (Routine method)
BS EN ISO 14673-2:2004. Milk and milk products. Determination of nitrate and nitrite contentsMethod using segmented flow analysis (Routine method)
BS EN ISO 14673-3:2001. Milk and milk products. Determination of nitrate and nitrite contentsMethod using cadmium reduction and flow injection analysis with in-line dialysis (Routine method)
BS EN ISO 14673-3:2004. Milk and milk products. Determination of nitrate and nitrite contentsMethod using cadmium reduction and flow injection analysis with in-line dialysis (routine method)
BS EN ISO 14678:2005. Adhesives. Determination of resistance to flow (sagging)
BS EN ISO 14680-1:2006, BS 3900-A26:2006. Paints and varnishes. Determination of pigment contentCentrifuge method
BS EN ISO 14680-2:2006, BS 3900-A27:2006. Paints and varnishes. Determination of pigment contentAshing method
BS EN ISO 14680-3:2006. Paints and varnishes. determination of pigment contentFiltration method
BS EN ISO 14683:1999. Thermal bridges in building construction. Linear thermal transmittance. Simplified methods and default values
BS EN ISO 14683:2007. Thermal bridges in building construction. Linear thermal transmittance. Simplified methods and default values
BS EN ISO 14688-1:2002. Geotechnical investigation and testing. Identification and classification of soilIdentification and description
BS EN ISO 14688-2:2004. Geotechnical investigation and testing. Identification and classification of soilPrinciples for a classification
BS EN ISO 14689-1:2003. Geotechnical investigation and testing. Identification and classification of rock.Identification and description
BS EN ISO 14691:2000. Petroleum and natural gas industries. Flexible couplings for mechanical power transmission. General purpose applications
BS EN ISO 14691:2008. Petroleum, petrochemical and natural gas industries. Flexible couplings for mechanical power transmission. General purpose applications
BS EN ISO 14692-1:2002. Petroleum and natural gas industries. Glass-reinforced plastics (GRP) pipingVocabulary, symbols, applications and materials
BS EN ISO 14692-2:2002. Petroleum and natural gas industries. Glass-reinforced plastics (GRP) pipingQualification and manufacture
BS EN ISO 14692-3:2002. Petroleum and natural gas industries. Glass-reinforced plastics (GRP) pipingSystem design
BS EN ISO 14692-4:2002. Petroleum and natural gas industries. Glass-reinforced plastics (GRP) pipingFabrication, installation and operation
BS EN ISO 14693:2003. Petroleum and natural gas industries. Drilling and well-servicing equipment
BS EN ISO 14698-1:2003. Cleanrooms and associated controlled environments. Biocontamination controlGeneral principles and methods
BS EN ISO 14698-2:2003. Cleanrooms and associated controlled environments. Biocontamination controlEvaluation and interpretation of biocontamination data
BS EN ISO 14713:1999. Protection against corrosion of iron and steel in structures. Zinc and aluminium coatings. Guidelines
BS EN ISO 14713-1:2009. Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structuresGeneral principles of design and corrosion resistance
BS EN ISO 14713-2:2009. Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structuresHot dip galvanizing
BS EN ISO 14713-3:2009. Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structuresSherardizing
BS EN ISO 14719:2011. Chemical analysis of refractory material glass and glazes. Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline
BS EN ISO 14720-1:2013. Testing of ceramic raw and basic materials. Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materialsInfrared measurement methods
BS EN ISO 14720-2:2013. Testing of ceramic raw and basic materials. Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materialsInductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow
BS EN ISO 14723:2002. Petroleum and natural gas industries. Pipeline transportation systems. Subsea pipeline valves
BS EN ISO 14723:2009. Petroleum and natural gas industries. Pipeline transportation systems. Subsea pipeline valves
BS EN ISO 14726-1:2002. Ships and marine technology. Identification colours for the content of piping systemsMain colours and media
BS EN ISO 14727:1999. Dental implants. Prefabricated parts connecting suprastructures to dental implants. Contents of technical file
BS EN ISO 14729:2001+A1:2010, BS 7208-26:2001. Ophthalmic optics. Contact lens care products. Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses
BS EN ISO 14730:2000, BS 7208-25:2000. Ophthalmic optics. Contact lens care products. Antimicrobial preservative efficacy testing and guidance on determining discard date
BS EN ISO 14731:2006. Welding coordination. Tasks and responsibilities
BS EN ISO 14732:2013. Welding personnel. Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
BS EN ISO 14738:2002. Safety of machinery. Anthropometric requirements for the design of workstations at machinery
BS EN ISO 14738:2008. Safety of machinery. Anthropometric requirements for the design of workstations at machineryAnthropometric requirements for the design of workstations at machinery
BS EN ISO 14744-1:2001. Welding. Acceptance inspection of electron beam welding machinesPrinciples and acceptance conditions
BS EN ISO 14744-1:2008. Welding. Acceptance inspection of electron beam welding machinesPrinciples and acceptance conditions
BS EN ISO 14744-2:2001. Welding. Acceptance inspection of electron beam welding machinesMeasurement of accelerating voltage characteristics
BS EN ISO 14744-3:2001. Welding. Acceptance inspection of electron beam welding machinesMeasurement of beam current characteristics
BS EN ISO 14744-4:2001. Welding. Acceptance inspection of electron beam welding machinesMeasurement of welding speed
BS EN ISO 14744-5:2001. Welding. Acceptance inspection of electron beam welding machinesMeasurement of run-out accuracy
BS EN ISO 14744-6:2001. Welding. Acceptance inspection of electron beam welding machinesMeasurement of stability of spot position
BS EN ISO 1478:1995. Tapping screw threads
BS EN ISO 1478:2000. Tapping screw thread
BS EN ISO 1479:1995. Specification for hexagon-head tapping screws
BS EN ISO 1479:2011. Hexagon head tapping screws
BS EN ISO 14798:2013. Lifts (elevators), escalators and moving walks. Risk assessment and reduction methodology
BS EN ISO 14801:2003. Dentistry. Fatigue test for endosseous dental implants
BS EN ISO 14801:2007. Dentistry. Implants. Dynamic fatigue test for endosseous dental implants
BS EN ISO 1481:1995. Specification for slotted pan-head tapping screws
BS EN ISO 148-1:2010. Metallic materials. Charpy pendulum impact testTest method
BS EN ISO 1481:2011. Slotted pan head tapping screws
BS EN ISO 14814:2006. Road transport and traffic telematics. Automatic vehicle and equipment identification. Reference architecture and terminology
BS EN ISO 14815:2005. Road transport and traffic telematics. Automatic vehicle and equipment identification. System specifications
BS EN ISO 14816:2005. Road transport and traffic telematics. Automatic vehicle and equipment identification. Numbering and data structure
BS EN ISO 14819-1:2003. Traffic and travel information (TTI). TTI messages via traffic message codingCoding protocol for radio data system. Traffic message channel RDS-TMC) using ALERT-C
BS EN ISO 14819-2:2003. Traffic and Traveller Information (TTI). TTI messages via traffic message codingEvent and information codes for Radio Data System. Traffic Message Channel (RDS-TMC)
BS EN ISO 14819-3:2004. Traffic and Travel Information (TTI). TTI messages via traffic message codingLocation referencing for ALERT-C
BS EN ISO 14819-6:2006. Traffic and traveller information (TTI). TTI messages via traffic message codingEncryption and conditional access for the radio data system. Traffic message channel ALERT C coding
BS EN ISO 1482:1995. Specification for slotted countersunk (flat) head tapping screws (common head style)
BS EN ISO 148-2:2008. Metallic materials. Charpy pendulum impact testVerification of testing machines
BS EN ISO 1482:2011. Slotted countersunk (flat) head tapping screws
BS EN ISO 14825:2004. Intelligent transport systems. Geographic data files (GFT). Overall data specification
BS EN ISO 14825:2011. Intelligent transport systems. Geographic data files (GDF). GDF5.0
BS EN ISO 1483:1995. Slotted raised countersunk (oval) head tapping screws (common head style)
BS EN ISO 148-3:2008. Metallic materials. Charpy pendulum impact testPreparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
BS EN ISO 1483:2011. Slotted raised countersunk (oval) head tapping screws
BS EN ISO 14847:1999. Rotary positive displacement pumps. Technical requirements
BS EN ISO 14851:2004. Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by measuring the oxygen demand in a closed respirometer
BS EN ISO 14852:2004. Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by analysis of evolved carbon dioxide
BS EN ISO 14855:2004. Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxide
BS EN ISO 14855-1:2007. Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxideGeneral method
BS EN ISO 14855-1:2012. Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxideGeneral method
BS EN ISO 14855-2:2009. Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxideGravimetric measurement of carbon dioxide evolved in a laboratory-scale test
BS EN ISO 14877:2002. Protective clothing for abrasive blasting operations using granular abrasives
BS EN ISO 14880-1:2005. Optics and photonics. Microlens arrayVocabulary
BS EN ISO 14880-2:2006. Optics and photonics. Microlens arraysTest methods for wavefront aberrations
BS EN ISO 14880-3:2006. Optics and photonics. Microlens arraysTest methods for optical properties other than wavefront aberrations
BS EN ISO 14880-4:2006. Optics and photonics. Microlens arraysTest methods for geometrical properties
BS EN ISO 14881:2005. Integrated optics. Interfaces. Parameters relevant to coupling properties
BS EN ISO 14889:1997, BS 2738-8:1997. Fundamental requirements for uncut finished lenses
BS EN ISO 14889:2003. Ophthalmic optics. Spectacle lenses. Fundamental requirements for uncut finished lenses
BS EN ISO 14889:2009. Ophthalmic optics. Spectacle lenses. Fundamental requirements for uncut finished lenses
BS EN ISO 14890:2003. Conveyor belts. Specification for rubber or plastics covered conveyor belts of textile construction for general use
BS EN ISO 14890:2013. Conveyor belts. Specification for rubber- or plastics-covered conveyor belts of textile construction for general use
BS EN ISO 14891:2002. Milk and milk products. Determination of nitrogen content. Routine method using combustion according to the Dumas principle
BS EN ISO 14895:2003. Small craft. Liquid-fuelled galley stoves
BS EN ISO 14896:2001. Plastics. Polyurethane raw materials. Determination of isocyanate content
BS EN ISO 14896:2009. Plastics. Polyurethane raw materials. Determination of isocyanate content
BS EN ISO 14902:2001. Animal feeding stuffs. Determination of trypsin inhibitor activity of soya products
BS EN ISO 14906:2004. Road transport and traffic telematics. Electronic fee collection. Application interface definition for dedicated short-range communication
BS EN ISO 14906:2011. Electronic fee collection. Application interface definition for dedicated short-range communication
BS EN ISO 14910-1:2006. Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion.Designation system and basis for specifications
BS EN ISO 14910-1:2013. Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusionDesignation system and basis for specification
BS EN ISO 14910-2:2006. Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion.Preparation of test specimens and determination of properties
BS EN ISO 14910-2:2013. Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusionPreparation of test specimens and determination of properties
BS EN ISO 14912:2006. Gas analysis. Conversion of gas mixture composition data
BS EN ISO 14915-1:2002. Software ergonomics for multimedia user interfacesDesign principles and framework
BS EN ISO 14915-2:2003. Software ergonomics for multimedia user interfacesMultimedia navigation and control
BS EN ISO 14915-3:2002. Software ergonomics for multimedia user interfacesMedia selection and combination
BS EN ISO 14918:1998. Thermal spraying. Approval testing of thermal sprayers
BS EN ISO 14919:2001. Thermal spraying, Wires, rods and cords for flame and arc spraying. Classification. Technical supply conditions
BS EN ISO 14920:1999. Thermal spraying. Spraying and fusing of self-fluxing alloys
BS EN ISO 14921:2001. Thermal spraying. Procedure for the application of thermally sprayed coatings for engineering components
BS EN ISO 14921:2010. Thermal spraying. Procedures for the application of thermally sprayed coatings for engineering components
BS EN ISO 14922-1:1999. Thermal spraying. Quality requirements of thermally sprayed structuresGuidance for selection and use
BS EN ISO 14922-2:1999. Thermal spraying. Quality requirements of thermally sprayed structuresComprehensive quality requirements
BS EN ISO 14922-3:1999. Thermal spraying. Quality requirements of thermally sprayed structuresStandard quality requirements
BS EN ISO 14922-4:1999. Thermal spraying. Quality requirements of thermally sprayed structuresElementary quality requirements
BS EN ISO 14923:2003. Thermal spraying. Characterization and testing of thermally sprayed coatings
BS EN ISO 14924:2005. Thermal spraying. Post-treatment and finishing of thermally sprayed coatings
BS EN ISO 14931:2004. Leather. Guide to the selection of leather for apparel (excluding furs)
BS EN ISO 14935:1999. Petroleum and related products. Determination of wick flame persistence of fire-resistant fluids
BS EN ISO 14937:2001. Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices
BS EN ISO 14937:2009. Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices
BS EN ISO 14939:2001. Animal feeding stuffs. Determination of carbadox content. Method using high performance liquid chromatography
BS EN ISO 14945:2004. Small craft. Builder's plate
BS EN ISO 14946:2001. Small craft. Maximum load capacity
BS EN ISO 14956:2002. Air quality. Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
BS EN ISO 14971:2001. Medical devices. Application of risk management to medical devices
BS EN ISO 14971:2007. Medical devices. Application of risk management to medical devices
BS EN ISO 14971:2009. Medical devices. Application of risk management to medical devices
BS EN ISO 14971:2012. Medical devices. Application of risk management to medical devices
BS EN ISO 14978:2006. Geometrical Product Specifications (GPS). General concepts and requirements for GPS measuring equipment
BS EN ISO 14982:1998. Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteria
BS EN ISO 14982:2009. Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteria
BS EN ISO 14998:2013. Petroleum and natural gas industries. Downhole equipment. Completion accessories
BS EN ISO 150:2007. Raw, refined and boiled linseed oil for paints and varnishes. Specifications and methods of test
BS EN ISO 15001:2004. Anaesthetic and respiratory equipment. Compatibility with oxygen
BS EN ISO 15001:2010. Anaesthetic and respiratory equipment. Compatibility with oxygen
BS EN ISO 15001:2011. Anaesthetic and respiratory equipment. Compatibility with oxygen
BS EN ISO 15002:2008. Flow-metering devices for connection to terminal units of medical gas pipeline systems
BS EN ISO 15004:1998. Ophthalmic instruments. Fundamental requirements and test methods
BS EN ISO 15004-1:2006. Ophthalmic instruments. Fundamental requirements and test methodsGeneral requirements applicable to all ophthalmic instruments
BS EN ISO 15004-1:2009. Ophthalmic instruments. Fundamental requirements and test methodsGeneral requirements applicable to all ophthalmic instruments
BS EN ISO 15004-2:2007. Ophthalmic instruments. Fundamental requirements and test methodsLight hazard protection
BS EN ISO 15005:2002. Road vehicles. Ergonomic aspects of transport information and control systems. Dialogue management principles and compliance procedures
BS EN ISO 15006:2004. Road vehicles. Ergonomic aspects of transport information and control systems. Specifications and compliance procedures for in-vehicle auditory presentation
BS EN ISO 15006:2011. Road vehicles. Ergonomic aspects of transport information and control systems. Specifications for in-vehicle auditory presentation
BS EN ISO 15007-1:2002. BSENISO15007-1:2002 Road vehicles- Measurement of driver visual behaviour with respect to transport information and control systemsPart 1: Definitions and parameters
BS EN ISO 15007-1:2002. Road vehicles. Measurement of driver visual behaviour with respect to transport information and control systemsDefinitions and parameters
BS EN ISO 15008:2003
BS EN ISO 15008:2003. Road vehicles. Ergonomic aspects of transport information and control systems. Specifications and compliance procedures for in-vehicle visual presentation
BS EN ISO 15008:2009. Road vehicles. Ergonomic aspects of transport information and control systems. Specifications and test procedures for in-vehicle visual presentation
BS EN ISO 15011-1:2002
BS EN ISO 15011-1:2002. Health and safety in welding and allied processes. Laboratory method for sampling fume and gases generated by arc weldingDetermination of emission rate and sampling for analysis of particulate fume
BS EN ISO 15011-1:2009. Health and safety in welding and allied processes. Laboratory method for sampling fume and gasesDetermination of fume emission rate during arc welding and collection of fume for analysis
BS EN ISO 15011-2:2003
BS EN ISO 15011-2:2003. Health and safety in welding and allied processes. Laboratory method for sampling fume and gases generated by arc weldingDetermination of emission rates of gases, except ozone
BS EN ISO 15011-2:2009. Health and safety in welding and allied processes. Laboratory method for sampling fume and gasesDetermination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging
BS EN ISO 15011-3:2002
BS EN ISO 15011-3:2002. Health and safety in welding and allied processes. Laboratory method for sampling fume and gases generated by arc weldingDetermination of ozone concentration using fixed point measurements
BS EN ISO 15011-3:2009. Health and safety in welding and allied processes. Laboratory method for sampling fume and gasesDetermination of ozone emission rate during arc welding
BS EN ISO 15011-4:2006+A1:2008
BS EN ISO 15011-4:2006+A1:2008. Health and safety in welding and allied processes. Laboratory method for sampling fume and gasesFume data sheets
BS EN ISO 15011-5:2011. Health and safety in welding and allied processes. Laboratory method for sampling fume and gasesIdentification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials using pyrolysis-gas chromatography-mass spectrometry
BS EN ISO 15012-1:2004
BS EN ISO 15012-1:2004. Health and safety in welding and allied processes. Requirements testing and marking of equipment for air filtrationTesting of the separation efficiency for welding fume
BS EN ISO 15012-1:2013. Health and safety in welding and allied processes. Equipment for capture and separation of welding fumeRequirements for testing and marking of separation efficiency
BS EN ISO 15012-2:2008
BS EN ISO 15012-2:2008. Health and safety in welding and allied processes. Requirements, testing and marking of equipment for air filtrationDetermination of the minimum air volume flow rate of captor hoods and nozzles
BS EN ISO 15013:1999
BS EN ISO 15013:1999. Extruded sheets of polypropylene (PP). Requirements and test methods
BS EN ISO 15013:2007
BS EN ISO 15013:2007. Plastics. Extruded sheets of polypropylene (PP). Requirements and test methods
BS EN ISO 15015:2007
BS EN ISO 15015:2007. Plastics. Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA). Requirements and test methods
BS EN ISO 15015:2011. Plastics. Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA). Requirements and test methods
BS EN ISO 15023-1:2006
BS EN ISO 15023-1:2006. Plastics. Poly(vinyl alcohol) (PVAL) materialsDesignation system and basis for specifications
BS EN ISO 15023-2:2006
BS EN ISO 15023-2:2006. Plastics. Poly(vinyl alcohol) (PVAL) materialsDetermination of properties
BS EN ISO 15025:2002
BS EN ISO 15025:2002. Protective clothing. Protection against heat and flame. Method of test for limited flame spread
BS EN ISO 15027-1:2002
BS EN ISO 15027-1:2002. Immersion suitsConstant wear suits, requirements including safety
BS EN ISO 15027-1:2012. Immersion suitsConstant wear suits, requirements including safety
BS EN ISO 15027-2:2002
BS EN ISO 15027-2:2002. Immersion suitsAbandonment suits, requirements including safety
BS EN ISO 15027-2:2012. Immersion suitsAbandonment suits, requirements including safety
BS EN ISO 15027-3:2002
BS EN ISO 15027-3:2002. Immersion suitsTest methods
BS EN ISO 15027-3:2012. Immersion suitsTest methods
BS EN ISO 15029-1:2000
BS EN ISO 15029-1:2000. Petroleum and related products. Determination of spray ignition characteristics of fire-resistant fluidsSpray flame persistence. Hollow-cone nozzle method
BS EN ISO 15061:2001, BS 6068-2.73:2001
BS EN ISO 15061:2001, BS 6068-2.73:2001. Water quality. Determination of dissolved bromate. Method by liquid chromatography of ions
BS EN ISO 15065:2005
BS EN ISO 15065:2005. Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
BS EN ISO 15083:2003
BS EN ISO 15083:2003. Small craft. Bilge-pumping systems
BS EN ISO 15084:2003
BS EN ISO 15084:2003. Small craft. Anchoring, mooring and towing. Strong points
BS EN ISO 15085:2003+A1:2009
BS EN ISO 15085:2003+A1:2009. Small craft. Man-overboard prevention and recovery
BS EN ISO 15087-1:2001
BS EN ISO 15087-1:2001. Dental elevatorsGeneral requirements
BS EN ISO 15087-2:2000
BS EN ISO 15087-2:2000. Dental elevatorsWarwick James elevators
BS EN ISO 15087-3:2000
BS EN ISO 15087-3:2000. Dental elevatorsCryer elevators
BS EN ISO 15087-4:2000
BS EN ISO 15087-4:2000. Dental elevatorsCoupland elevators
BS EN ISO 15087-5:2000
BS EN ISO 15087-5:2000. Dental elevatorsBein elevators
BS EN ISO 15087-6:2000
BS EN ISO 15087-6:2000. Dental elevatorsFlohr elevators
BS EN ISO 15088:2008
BS EN ISO 15088:2008. Water quality. Determination of the acute toxicity of waste water to zebrafish eggs (Danio rerio)
BS EN ISO 15091:2012. Paints and varnishes. Determination of electrical conductivity and resistance
BS EN ISO 15098-1:2001
BS EN ISO 15098-1:2001. Dental tweezersGeneral requirements
BS EN ISO 15098-2:2000
BS EN ISO 15098-2:2000. Dental tweezersMeriam types
BS EN ISO 15098-3:2000
BS EN ISO 15098-3:2000. Dental tweezersCollege types
BS EN ISO 15103-1:2004
BS EN ISO 15103-1:2004. Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 15103-2:2004
BS EN ISO 15103-2:2004. Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 15103-2:2007
BS EN ISO 15103-2:2007. Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 15106-1:2005
BS EN ISO 15106-1:2005. Plastics. Film and sheeting. Determination of water vapour transmission rateHumidity detection sensor method
BS EN ISO 15106-2:2005
BS EN ISO 15106-2:2005. Plastics. Film and sheeting. Determination of water vapour transmission rateInfrared detection sensor method
BS EN ISO 15106-3:2005
BS EN ISO 15106-3:2005. Plastics. Film and sheeting. Determinaktion of water vapour transmission rateElectrolytic detection sensor method
BS EN ISO 15110:2013. Paints and varnishes. Artificial weathering including acidic deposition
BS EN ISO 1513:1995, BS 3900-A2:1993
BS EN ISO 1513:1995, BS 3900-A2:1993. Paints and varnishes. Examination and preparation of samples for testing
BS EN ISO 1513:2010. Paints and varnishes. Examination and preparation of test samples
BS EN ISO 15136-1:2001
BS EN ISO 15136-1:2001. Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial liftPumps
BS EN ISO 15136-1:2009. Petroleum and natural gas industries. Progressing cavity pump systems for artificial liftPumps CD-ROM
BS EN ISO 15136-2:2006
BS EN ISO 15136-2:2006. Petroleum and natural gas industries. Progressing cavity pump systems for artificial liftSurface drive systems
BS EN ISO 15138:2001
BS EN ISO 15138:2001. Petroleum and natural gas industries. Offshore production installations. Heating, ventilation and air-conditioning
BS EN ISO 15138:2007
BS EN ISO 15138:2007. Petroleum and natural gas industries. Offshore production installations. Heating, ventilation and air-conditioning
BS EN ISO 1514:1997, BS 3900-A3:1997
BS EN ISO 1514:1997, BS 3900-A3:1997. Paints and varnishes. Standard panels for testing
BS EN ISO 1514:2004, BS 3900-A3:2004
BS EN ISO 1514:2004, BS 3900-A3:2004. Paints and varnishes. Standard panels for testing
BS EN ISO 15141-1:1998
BS EN ISO 15141-1:1998. Foodstuffs. Determination of ochratoxin A in cereals and cereal productsHigh performance liquid chromatographic method with silica gel clean up
BS EN ISO 15141-2:1998
BS EN ISO 15141-2:1998. Foodstuffs. Determination of ochratoxin A in cereals and cereal productsHigh performance liquid chromatographic method with bicarbonate clean up
BS EN ISO 15147:1999
BS EN ISO 15147:1999. Light conveyor belts. Tolerances on widths and lengths of cut light conveyor belts
BS EN ISO 15147:2012. Light conveyor belts. Tolerances on widths and lengths of cut light conveyor belts
BS EN ISO 15148:2002
BS EN ISO 15148:2002. Hygrothermal performance of building materials and products. Determination of water absorption coefficient by partial immersion
BS EN ISO 15156-1:2002
BS EN ISO 15156-1:2009. Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas productionGeneral principles for selection of cracking-resistant materials
BS EN ISO 15156-2:2009. Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas productionCracking-resistant carbon and low-alloy steels, and the use of cast irons
BS EN ISO 15156-3:2009. Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas productionCracking-resistant CRAs (corrosion-resistant alloys) and other alloys
BS EN ISO 1516:2002, BS 2000-491:2002. Method of test for petroleum and its products. Determination of flash/no flash. Closed cup equilibrium method
BS EN ISO 1517:1995, BS 3900-C2:1994. Paints and varnishes. Surface-drying test. Ballotini method
BS EN ISO 1518:2001, BS 3900-E2:1992. Paints and varnishes. Scratch test
BS EN ISO 1518-1:2011. Paints and varnishes. Determination of scratch resistanceConstant-loading method
BS EN ISO 15181-1:2004, BS 3900-K1:2001. Paints and varnishes. Determination of release rate of biocides from antifouling paintsGeneral method for extraction of biocides
BS EN ISO 15181-1:2007. Paints and varnishes. Determination of release rate of biocides from antifouling paintsGeneral method for extraction of biocides
BS EN ISO 15181-2:2004, BS 3900-K2:2001. Paints and varnishes. Determination of release rate of biocides from antifouling paintsDetermination of copper-ion concentration in the extract and calculation of the release rate
BS EN ISO 15181-2:2007. Paints and varnishes. Determination of release rate of biocides from antifouling paintsDetermination of copper-ion concentration in the extract and calculation of the release rate
BS EN ISO 15181-3:2007, BS 3900-K3:2007. Paints and varnishes. Determination of release rate of biocides from antifouling paintsCalculation of the zinc ethylene-bis (dithiocarbamate)(zineb) release rate by determination of the concentration of ethylenethiourea in the extract
BS EN ISO 15181-4:2008, BS 3900-K4:2008. Paints and varnishes. Determination of release rate of biocides from antifouling paintsDetermination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate
BS EN ISO 15181-5:2008, BS 3900-K5:2008. Paints and varnishes. Determination of release rate of biocides from antifouling paintsCalculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract
BS EN ISO 1518-2:2011. Paints and varnishes. Determination of scratch resistanceVariable-loading method
BS EN ISO 15184:2012. Paints and varnishes. Determination of film hardness by pencil test
BS EN ISO 15186-1:2003. Acoustics. Measurement of sound insulation in buildings and of building elements using sound intensityLaboratory measurements
BS EN ISO 15186-2:2010. Acoustics. Measurement of sound insulation in buildings and of building elements using sound intensityField measurements
BS EN ISO 15186-3:2010. Acoustics. Measurement of sound insulation in buildings and of building elements using sound intensityLaboratory measurements at low frequencies
BS EN ISO 15187:2002. Manipulating industrial robots. Graphical user interfaces for programming and operation of robots (GUI-R)
BS EN ISO 15189:2003. Medical laboratories. Particular requirements for quality and competence
BS EN ISO 15189:2007. Medical laboratories. Particular requirements for quality and competence
BS EN ISO 15189:2012. Medical laboratories. Requirements for quality and competence
BS EN ISO 1519:1995, BS 3900-E1:1995. Paints and varnishes. Bend test (cylindrical mandrel)
BS EN ISO 1519:2002, BS 3900-E1:2002. Paints and varnishes. Bend test (cylindrical mandrel)
BS EN ISO 1519:2011. Paints and varnishes. Bend test (cylindrical mandrel)
BS EN ISO 15193:2009. In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for content and presentation of reference measurement procedures
BS EN ISO 15194:2009. In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for certified reference materials and the content of supporting documentation
BS EN ISO 15195:2003. Laboratory medicine. Requirements for reference measurement laboratories
BS EN ISO 15197:2003. In vitro diagnostic test systems. Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
BS EN ISO 15197:2013. In vitro diagnostic test systems. Requirements for blood-glucosemonitoring systems for self-testing in managing diabetes mellitus
BS EN ISO 1520:1995, BS 3900-E4:1995. Paints and varnishes. Cupping test
BS EN ISO 1520:2001. Paints and varnishes. Cupping test
BS EN ISO 1520:2006. Paints and varnishes. Cupping test
BS EN ISO 15212-1:1999. Oscillation-type density metersLaboratory instruments
BS EN ISO 15212-2:2002. Oscillation-type density metersProcess instruments for homogeneous liquids
BS EN ISO 1522:2001, BS 3900-E5:1998. Paints and varnishes. Pendulum damping test
BS EN ISO 1522:2006. Paints and varnishes. Pendulum damping test
BS EN ISO 15223-1:2012 (CD-ROM), BS EN 15986:2011
BS EN ISO 15223-1:2012 (CD-ROM), BS EN 15986:2011. Medical devices. Symbols to be used with medical device labels, labelling and information to be suppliedGeneral requirements
BS EN ISO 15223-1:2012. Medical devices. Symbols to be used with medical device labels, labelling and information to be suppliedGeneral requirements
BS EN ISO 15225:2000. Nomenclature. Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange
BS EN ISO 15225:2010. Medical devices. Quality management. Medical device nomenclature data structure
BS EN ISO 1523:2002, BS 2000-492:2002. Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method
BS EN ISO 15234:2010. Paints and varnishes. Testing of formaldehyde-emitting coatings and melamine foams. Determination of the steady-state concentration of formaldehyde in a small test chamber
BS EN ISO 15236-1:2005. Steel cord conveyor beltsDesign, dimensions and mechanical requirements for conveyor belts for general use
BS EN ISO 15236-2:2004. Steel cord conveyor beltsPreferred belt types
BS EN ISO 15236-3:2007. Steel cord conveyor beltsSpecial safety requirements for belts for use in underground installations
BS EN ISO 15236-4:2004. Steel cord conveyor beltsVulcanized belt joints
BS EN ISO 1524:2002, BS 3900-C6:2000. Paints, varnishes and printing inks. Determination of fineness of grind
BS EN ISO 1524:2013. Paints, varnishes and printing inks. Determination of fineness of grind
BS EN ISO 15245-1:2001+A1:2013. Gas cylinders. Parallel threads for connection of valves to gas cylindersSpecification
BS EN ISO 15245-2:2001. Gas cylinders. Parallel threads for connection of valves to gas cylindersGauge inspection
BS EN ISO 15252-1:2000. Plastics. Epoxy powder moulding compounds (EP-PMCs)Designation system and basis for specifications
BS EN ISO 15252-2:2000. Plastics. Epoxy powder moulding compounds (EP-PMCs)Preparation of test specimens and determination of properties
BS EN ISO 15252-3:2000. Plastics. Epoxy powder moulding compounds (EP-PMCs)Requirements for selected moulding compounds
BS EN ISO 15253:2000. Ophthalmic optics and instruments. Optical devices for low-vision aids
BS EN ISO 15254:2002. Ophthalmic optics and instruments. Electro-optical devices for enhancing low vision
BS EN ISO 15254:2009. Ophthalmic optics and instruments. Electro-optical devices for enhancing low vision
BS EN ISO 15265:2004. Ergonomics of the thermal environment. Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions
BS EN ISO 1530:2003. Fishing nets. Description and designation of knotted netting
BS EN ISO 15301:2001, BS 684-2.53:2001. Animal and vegetable fats and oils. Determination of sediment in crude fats and oils. Centrifuge method
BS EN ISO 15302:2007. Animal and vegetable fats and oils. Determination of benzo[a]pyrene content. Reverse-phase high-performance liquid chromatography method
BS EN ISO 15302:2010. Animal and vegetable fats and oils. Determination of benzo[a]pyrene. Reverse-phase high performance liquid chromatography method
BS EN ISO 15303:2008. Animal and vegetable fats and oils. Detection and identification of a volatile organic contaminant by GC/MS
BS EN ISO 15304:2002. Animal and vegetable fats and oils. Determination of the content of trans fatty acid isomers of vegetable fats and oil. Gas chromatographic method
BS EN ISO 15310:2005. Reinforced plastics. Determination of the in-plane shear modulus by the plate twist method
BS EN ISO 15318:2000. Pulp, paper and board. Determination of 7 specified polychlorinated biphenyls (PCB)
BS EN ISO 15320:2003. Pulp, paper and board. Determination of pentachlorophenol in an aqueous extract
BS EN ISO 15320:2011. Pulp, paper and board. Determination of pentachlorophenol in an aqueous extract
BS EN ISO 15324:2008. Corrosion of metals and alloys. Evaluation of stress corrosion cracking by the drop evaporation test
BS EN ISO 15329:2008. Corrosion of metals and alloys. Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys
BS EN ISO 15330:1999. Fasteners. Preloading test for the detection of hydrogen embrittlement. Parallel bearing surface method
BS EN ISO 15349-2:2003. Unalloyed steel. Determination of low carbon contentInfrared absorption method after combustion in an induction furnace (with preheating)
BS EN ISO 15350:2010. Steel and iron. Determination of total carbon and sulfur content. Infrared absorption method after combustion in an induction furnace (routine method)
BS EN ISO 15351:2010. Steel and iron. Determination of nitrogen content. Thermal conductimetric method after fusion in a current of inert gas (Routine method)
BS EN ISO 15364:2002. Ships and marine technology. Pressure/vacuum valves for cargo tanks
BS EN ISO 15367-1:2003. Lasers and laser-related equipment. Test methods for determination of the shape of a laser beam wavefrontTerminology and fundamental aspects
BS EN ISO 15367-2:2005. Lasers and laser-related equipment. Test methods for determination of the shape of a laser beam wavefrontShack-Hartmann sensors
BS EN ISO 15378:2007. Primary packaging materials for medicinal products. Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practice (GMP)
BS EN ISO 15378:2011. Primary packaging materials for medicinal products. Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP)
BS EN ISO 15403-1:2008. Natural gas. Natural gas for use as a compressed fuel for vehiclesDesignation of the quality
BS EN ISO 15415:2005. Information technology. Automatic identification and data capture techniques. Bar code print quality test specification. Two-dimensional symbols
BS EN ISO 15438:2003. Information technology. Automatic identification and data capture techniques. Bar code symbology specifications. PDF417
BS EN ISO 15463:2003. Petroleum and natural gas industries. Field inspection of new casing, tubing and plain-end drill pipe
BS EN ISO 15465:2004. Pipework. Stripwound metal hoses and hose assemblies
BS EN ISO 15480:1999. Hexagon washer head drilling screws with tapping screw thread
BS EN ISO 15481:1999. Cross recessed pan head drilling screws with tapping screw thread
BS EN ISO 15482:1999. Cross recessed countersunk head drilling screws with tapping screw thread
BS EN ISO 15483:1999. Cross recessed raised countersunk head drilling screws with tapping screw thread
BS EN ISO 15487:2001. Textiles. Method for assessing appearance of apparel and other textile end products after domestic washing and drying
BS EN ISO 15487:2010. Textiles. Method for assessing appearance of apparel and other textile end products after domestic washing and drying
BS EN ISO 15493:2003. Plastics piping systems for industrial applications. Acrylonitrile-butadiene-styrene (ABS), unplasticized poly (vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C). Specifications for components and the system. Metric series
BS EN ISO 15494:2003. Plastics piping systems for industrial applications. Polybutene (PB), polyethylene (PE) and polypropylene (PP). Specifications for components and the system. Metric series
BS EN ISO 15502:2005. Household refrigerating appliances. Characteristics and test methods
BS EN ISO 15512:2003. Plastics. Determination of water content
BS EN ISO 15512:2009. Plastics. Determination of water content
BS EN ISO 15526-1:2004. Plastics. Polyketone (PK) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 15526-2:2004. Plastics. Polyketone (PK) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 15527:2013. Plastics. Compression-moulded sheets of polyethylene (PEUHMW, PE-HD). Requirements and test methods
BS EN ISO 15528:2000. Paints, varnishes and raw materials for paints and varnishes. Sampling
BS EN ISO 15528:2013. Paints, varnishes and raw materials for paints and varnishes. Sampling
BS EN ISO 15530-3:2011. Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurementUse of calibrated workpieces or measurement standards
BS EN ISO 15535:2003. General requirements for establishing anthropometric databases
BS EN ISO 15535:2006. General requirements for establishing anthropometric databases
BS EN ISO 15535:2012. General requirements for establishing anthropometric databases
BS EN ISO 15536-1:2005. Ergonomics. Computer manikins and body templatesGeneral requirements
BS EN ISO 15536-1:2008. Ergonomics. Computer manikins and body templatesGeneral requirements
BS EN ISO 15536-2:2007. Ergonomics. Computer manikins and body templatesVerification of functions and validation of dimensions for computer manikin systems
BS EN ISO 15537:2004. Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs
BS EN ISO 15540:2001. Ships and marine technology. Fire resistance of hose assemblies. Test methods
BS EN ISO 15541:2001. Ships and marine technology. Fire resistance of hose assemblies. Requirements for the test bench
BS EN ISO 15544:2010. Petroleum and natural gas industries. Offshore production installations. Requirements and guidelines for emergency response
BS EN ISO 15546:2002. Petroleum and natural gas industries. Aluminium alloy drill pipe
BS EN ISO 15546:2007. Petroleum and natural gas industries. Aluminium alloy drill pipe
BS EN ISO 15546:2011. Petroleum and natural gas industries. Aluminium alloy drill pipe
BS EN ISO 15547:2001. Petroleum and natural gas industries. Plate heat exchangers
BS EN ISO 15547-1:2005. Petroleum, petrochemical and natural gas industries. Plate-type heat exchangersPlate-and-frame heat exchangers
BS EN ISO 15547-2:2005. Petroleum, petrochemical and natural gas industries. Plate-type heat exchangersBrazed aluminium plate-fin heat exchangers
BS EN ISO 15548-1:2008. Non-destructive testing. Equipment for eddy current examinationInstrument characteristics and verification
BS EN ISO 15548-2:2008. Non-destructive testing. Equipment for eddy current examinationProbe characteristics and verification
BS EN ISO 15548-3:2008. Non-destructive testing. Equipment for eddy current examinationSystem characteristics and verification
BS EN ISO 15549:2010. Non-destructive testing. Eddy current testing. General principles
BS EN ISO 15584:2001. Small craft. Inboard petrol engines. Engine-mounted fuel and electrical components
BS EN ISO 15586:2003, BS 6068-2.84:2003. Water quality. Determination of trace elements using atomic absorption spectrometry with graphite furnace
BS EN ISO 15587-1:2002, BS 6068-2.76:2002. Water quality. Digestion for the determination of selected elements in waterAqua regia digestion
BS EN ISO 15587-2:2002, BS 6068-2.77:2002. Water quality. Digestion for the determination of selected elements in waterNitric acid digestion
BS EN ISO 1559:2001. Dental materials. Alloys for dental amalgam
BS EN ISO 15605:2004. Adhesives. Sampling
BS EN ISO 15606:2000. Dental handpieces. Air-powered scalers and scaler tips
BS EN ISO 15607:2003. Specification and qualification of welding procedures for metallic materials. General rules
BS EN ISO 15609-1:2004. Specification and qualification of welding procedures for metallic materials. Welding procedure specificationArc welding
BS EN ISO 15609-2:2001. Specification and qualification of welding procedures for metallic materials. Welding procedure specificationGas welding
BS EN ISO 15609-3:2004. Specification and qualification of welding procedures for metallic materials. Welding procedure specificationElectron beam welding
BS EN ISO 15609-4:2004. Specification and qualification of welding procedures for metallic materials. Welding procedure specificationLaser beam welding
BS EN ISO 15609-4:2009. Specification and qualification of welding procedures for metallic materials. Welding procedure specificationLaser beam welding
BS EN ISO 15609-5:2004. Specification and qualification of welding procedures for metallic materials. Welding procedure specificationResistance welding
BS EN ISO 15609-5:2011. Specification and qualification of welding procedures for metallic materials. Welding procedure specificationResistance welding
BS EN ISO 15609-6:2013. Specification and qualification of welding procedures for metallic materials. Welding procedure specificationLaser-arc hybrid welding
BS EN ISO 1561:1998. Dental casting wax
BS EN ISO 15610:2003. Specification and qualification of welding procedures for metallic materials. Qualification based on tested welding consumables
BS EN ISO 15611:2003. Specification and qualification of welding procedures for metallic materials. Qualification based on previous welding experience
BS EN ISO 15612:2004. Specification and qualification of welding procedures for metallic materials. Qualification by adoption of a standard welding procedure
BS EN ISO 15613:2004. Specification and qualification of welding procedures for metallic materials. Qualification based on pre-production welding test
BS EN ISO 15614-1:2004+A2:2012. Specification and qualification of welding procedures for metallic materials. Welding procedure testArc and gas welding of steels and arc welding of nickel and nickel alloys
BS EN ISO 15614-10:2005. Specification and qualification of welding procedures for metallic materials. Welding procedure testHyperbaric dry welding
BS EN ISO 15614-11:2002. Specification and qualification of welding procedures for metallic materials. Welding procedure testElectron and laser beam welding
BS EN ISO 15614-12:2004. Specification and qualification of welding procedures for metallic materials. Welding procedure testSpot, seam and projection welding
BS EN ISO 15614-13:2005. Specification and qualification of welding procedures for metallic materials. Welding procedure testResistance butt and flash welding
BS EN ISO 15614-13:2012. Specification and qualification of welding procedures for metallic materials. Welding procedure testUpset (resistance butt) and flash welding
BS EN ISO 15614-14:2013. Specification and qualification of welding procedures for metallic materials. Welding procedure testLaser-arc hybrid welding of steels, nickel and nickel alloys
BS EN ISO 15614-2:2005. Specification and qualification of welding procedures for metallic materials. Welding procedure testArc welding of aluminium and its alloys
BS EN ISO 15614-3:2008. Specification and qualification of welding procedures for metallic materials. Welding procedure testFusion welding of non-alloyed and low-alloyed cast irons
BS EN ISO 15614-4:2005. Specification and qualification of welding procedures for metallic materials. Welding procedure testFinishing welding of aluminium castings
BS EN ISO 15614-5:2004. Specification and qualification of welding procedures for metallic materials. Welding procedure testArc welding of titanium, zirconium and their alloys
BS EN ISO 15614-6:2006. Specification and qualification of welding procedures for metallic materials. Welding procedure testArc and gas welding of copper and its alloys
BS EN ISO 15614-7:2007. Specification and qualification of welding procedures for metallic materials. Welding procedure testOverlay welding
BS EN ISO 15614-8:2002. Specification and qualification of welding procedures for metallic materials. Welding procedure testWelding of tubes to tube-plate joints
BS EN ISO 15615:2002. Gas welding equipment. Acetylene manifold systems for welding, cutting and allied processes. Safety requirements in high-pressure devices
BS EN ISO 15615:2013. Gas welding equipment. Acetylene manifold systems for welding, cutting and allied processes. Safety requirements in high-pressure devices
BS EN ISO 15618-1:2002
BS EN ISO 15618-1:2002. Qualification testing of welders for under-water weldingDiver-welders for hyperbaric wet welding
BS EN ISO 15618-2:2002
BS EN ISO 15618-2:2002. Qualification testing of welders for under-water weldingDiver-welders and welding operators for hyperbaric dry welding
BS EN ISO 1562:1995
BS EN ISO 1562:1995. Dental casting gold alloys
BS EN ISO 1562:2004
BS EN ISO 1562:2004. Dentistry. Casting gold alloys
BS EN ISO 15620:2000
BS EN ISO 15620:2000. Welding. Friction welding of metallic materials
BS EN ISO 15630-1:2002
BS EN ISO 15630-1:2002. Steel for the reinforcement and prestressing of concrete. Test methodsReinforcing bars, wire rod and wire
BS EN ISO 15630-1:2010. Steel for the reinforcement and prestressing of concrete. Test methodsReinforcing bars, wire rod and wire
BS EN ISO 15630-2:2002
BS EN ISO 15630-2:2002. Steel for the reinforcement and prestressing of concrete. Test methodsWelded fabric
BS EN ISO 15630-2:2010. Steel for the reinforcement and prestressing of concrete. Test methodsWelded fabric
BS EN ISO 15630-3:2002
BS EN ISO 15630-3:2002. Steel for the reinforcement and prestressing of concrete. Test methodsPrestressing steel
BS EN ISO 15630-3:2010. Steel for the reinforcement and prestressing of concrete. Test methodsPrestressing steel
BS EN ISO 1564:1999
BS EN ISO 1564:1999. Dental aqueous impression materials based on agar
BS EN ISO 15641:2001
BS EN ISO 15641:2001. Milling cutters for high speed machining. Safety requirements
BS EN ISO 15652:2005
BS EN ISO 15652:2005. Small craft. Remote steering systems for inboard mini jet boats
BS EN ISO 15653:2010. Metallic materials. Method of test for the determination of quasistatic fracture toughness of welds
BS EN ISO 15663-1:2006
BS EN ISO 15663-1:2006. Petroleum and natural gas industries. Life cycle costingMethodology
BS EN ISO 15667:2000
BS EN ISO 15667:2000. Acoustics. Guidelines for noise control by enclosures and cabins
BS EN ISO 1567:1995
BS EN ISO 1567:1995. Dentistry. Denture base polymers
BS EN ISO 1567:2001
BS EN ISO 1567:2001. Dentistry. Denture base polymers
BS EN ISO 15680:2003, BS 6068-2.85:2003
BS EN ISO 15680:2003, BS 6068-2.85:2003. Water quality. Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
BS EN ISO 15681-1:2004, BS 6068-2.86:2003
BS EN ISO 15681-1:2004, BS 6068-2.86:2003. Water quality. Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA)Method by flow injection analysis (FIA)
BS EN ISO 15681-2:2004, BS 6068-2.87:2004
BS EN ISO 15681-2:2004, BS 6068-2.87:2004. Water quality. Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA)Method by continuous flow analysis (CFA)
BS EN ISO 15682:2001, BS 6068-2.71:2000
BS EN ISO 15682:2001, BS 6068-2.71:2000. Water quality. Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection
BS EN ISO 15695:2001
BS EN ISO 15695:2001. Vitreous and porcelain enamels. Determination of scratch resistance of enamel finishes
BS EN ISO 15700:1999
BS EN ISO 15700:1999. Leather. Tests for colour fastness. Colour fastness to water spotting
BS EN ISO 15701:1999
BS EN ISO 15701:1999. Leather. Tests for colour fastness. Colour fastness to migration into plasticized poly (vinyl chloride)
BS EN ISO 15702:2000
BS EN ISO 15702:2000. Leather. Tests for colour fastness. Colour fastness to machine washing
BS EN ISO 15703:1999
BS EN ISO 15703:1999. Leather. Tests for colour fastness. Colour fastness to mild washing
BS EN ISO 15710:2006
BS EN ISO 15710:2006. Paints and varnishes. Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution
BS EN ISO 15711:2004
BS EN ISO 15711:2004. Paints and varnishes. Determination of resistance to cathodic disbonding of coatings exposed to sea water
BS EN ISO 15715:2006
BS EN ISO 15715:2006. Binders for paints and varnishes. Determination of turbidity
BS EN ISO 15720:2001
BS EN ISO 15720:2001. Metallic coatings. Porosity tests. Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
BS EN ISO 15721:2001
BS EN ISO 15721:2001. Metallic coatings. Porosity tests. Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour
BS EN ISO 15732:2005
BS EN ISO 15732:2005. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method
BS EN ISO 15743:2008
BS EN ISO 15743:2008. Ergonomics of the thermal environment. Cold workplaces. Risk assessment and management
BS EN ISO 15744:2002
BS EN ISO 15744:2002. Hand-held non-electric power tools. Noise measurement code. Engineering method (grade 2)
BS EN ISO 15744:2008
BS EN ISO 15744:2008. Hand-held non-electric power tools. Noise measurement code. Engineering method (grade 2)
BS EN ISO 15747:2005. Plastic containers for intravenous injection
BS EN ISO 15747:2010. Plastic containers for intravenous injections
BS EN ISO 15747:2011. Plastic containers for intravenous injections
BS EN ISO 15748-1:2002
BS EN ISO 15748-1:2002. Ships and marine technology. Potable water supply on ships and marine structuresPlanning and design
BS EN ISO 15748-2:2002
BS EN ISO 15748-2:2002. Ships and marine technology. Potable water supply on ships and marine structuresMethod of calculation
BS EN ISO 15749-1:2004
BS EN ISO 15749-1:2004. Ships and marine technology. Drainage systems on ships and marine structuresSanitary drainage-system design
BS EN ISO 15749-2:2004
BS EN ISO 15749-2:2004. Ships and marine technology. Drainage systems on ships and marine structuresSanitary drainage, drain piping for gravity system
BS EN ISO 15749-3:2004
BS EN ISO 15749-3:2004. Ships and marine technology. Drainage systems on ships and marine structuresSanitary drainage, drain piping for vacuum system
BS EN ISO 15749-4:2004
BS EN ISO 15749-4:2004. Ships and marine technology. Drainage systems on ships and marine structuresSanitary drainage, sewage disposal pipes
BS EN ISO 15749-5:2004
BS EN ISO 15749-5:2004. Ships and marine technology. Drainage systems on ships and marine structuresDrainage of decks, cargo spaces and swimming pools
BS EN ISO 15750-1:2008
BS EN ISO 15750-1:2008. Packaging. Steel drumsRemovable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l
BS EN ISO 15750-2:2008
BS EN ISO 15750-2:2008. Packaging. Steel drumsNon-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l
BS EN ISO 15750-3:2008
BS EN ISO 15750-3:2008. Packaging. Steel drumsInserted flange-type closure systems
BS EN ISO 15752:2010. Ophthalmic instruments. Endoilluminators. Fundamental requirements and test methods for optical radiation safety
BS EN ISO 15753:2006+A1:2011
BS EN ISO 15753:2006+A1:2011. Animal and vegetable fats and oils. Determination of polycyclic aromatic hydrocarbons. Exclusion of olive pomace oil from the scope
BS EN ISO 15755:2000
BS EN ISO 15755:2000. Paper and board. Estimation of contraries
BS EN ISO 15761:2002. Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries
BS EN ISO 15774:2001, BS 684-2.50:2000. Animal and vegetable fats and oils. Determination of cadmium content by direct graphite furnace atomic absorption spectrometry
BS EN ISO 15783:2003+A1:2008. Seal-less rotodynamic pumps. Class II. Specification
BS EN ISO 15785:2002. Technical drawings. Symbolic presentation and indication of adhesive fold and pressed joints
BS EN ISO 15788-1:2001, BS 684-2.49:2000. Animal and vegetable fats and oils. Determination of stigmastadienes in vegetable oilsMethod using capillary-column gas chromatography (Reference method)
BS EN ISO 15788-2:2004. Animal and vegetable fats and oils. Determination of stigmastadienes in vegetable oilsMethod using high-performance liquid chromatography (HPLC)
BS EN ISO 15791-1:2004. Plastics. Development and use of intermediate-scale fire tests for plastics productsGeneral guidance
BS EN ISO 15792-1:2008+A1:2011. Welding consumables. Test methodsTest methods for all-weld metal test specimens in steel, nickel and nickel alloys
BS EN ISO 15792-2:2008. Welding consumables. Test methodsPreparation of single-run and two-run technique test specimens in steel
BS EN ISO 15792-3:2008. Welding consumables. Test methodsClassification testing of positional capacity and root penetration of welding consumables in a fillet weld
BS EN ISO 15792-3:2011. Welding consumables. Test methodsClassification testing of positional capacity and root penetration of welding consumables in a fillet weld
BS EN ISO 15796:2008. Gas analysis. Investigation and treatment of analytical bias
BS EN ISO 15797:2004. Textiles. Industrial washing and finishing procedures for testing of workwear
BS EN ISO 15798:2001. Ophthalmic implants. Ophthalmic viscosurgical devices
BS EN ISO 15798:2010. Ophthalmic implants. Ophthalmic viscosurgical devices
BS EN ISO 15798:2013. Ophthalmic implants. Ophthalmic viscosurgical devices
BS EN ISO 1580:1994. Slotted pan head screws. Product grade A
BS EN ISO 1580:2011. Slotted pan head screws. Product grade A
BS EN ISO 15831:2004. Clothing. Physiological effects. Measurement of thermal insulation by means of a thermal manikin
BS EN ISO 15839:2006. Water quality. On-line sensors/analysing equipment for water. Specifications and performance tests
BS EN ISO 15841:2006. Dentistry. Wires for use in orthodontics
BS EN ISO 15848-1:2006. Industrial valves. Measurement, test and qualification procedures for fugitive emissionsClassification system and qualification procedures for type testing of valves
BS EN ISO 15848-2:2006. Industrial valves. Measurement, test and qualification procedures for fugitive emissionsProduction acceptance test of valves
BS EN ISO 15854:2005. Dentistry. Casting and baseplate waxes
BS EN ISO 15867:2003. Intermediate bulk containers (IBCs) for non-dangerous goods. Terminology
BS EN ISO 15874-1:2003. Plastics piping systems for hot and cold water installations. Polypropylene (PP)General
BS EN ISO 15874-1:2013. Plastics piping systems for hot and cold water installations. Polypropylene (PP)General
BS EN ISO 15874-2:2003. Plastics piping systems for hot and cold water installations. Polypropylene (PP)Pipes
BS EN ISO 15874-2:2013. Plastics piping systems for hot and cold water installations. Polypropylene (PP)Pipes
BS EN ISO 15874-3:2003. Plastics piping systems for hot and cold water installations. Polypropylene (PP)Fittings
BS EN ISO 15874-3:2013. Plastics piping systems for hot and cold water installations. Polypropylene (PP)Fittings
BS EN ISO 15874-5:2003. Plastics piping systems for hot and cold water installations. Polypropylene (PP)Fitness for purpose of the system
BS EN ISO 15874-5:2013. Plastics piping systems for hot and cold water installations. Polypropylene (PP)Fitness for purpose of the system
BS EN ISO 15875-1:2003. Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X)General
BS EN ISO 15875-2:2003. Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X)Pipes
BS EN ISO 15875-3:2003. Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X)Fittings
BS EN ISO 15875-5:2003. Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X)Fitness for purpose of the system
BS EN ISO 15876-1:2003. Plastics piping systems for hot and cold water installations. Polybutylene (PB)General
BS EN ISO 15876-2:2003. Plastics piping systems for hot and cold water installations. Polybutylene (PB)Pipes
BS EN ISO 15876-3:2003. Plastics piping systems for hot and cold water installations. Polybutylene (PB)Fittings
BS EN ISO 15876-5:2003. Plastics piping systems for hot and cold water installations. Polybutylene (PB)Fitness for purpose of the system
BS EN ISO 15877-1:2003. Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C)General
BS EN ISO 15877-1:2009+A1:2010. Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C)General
BS EN ISO 15877-2:2003. Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C)Pipes
BS EN ISO 15877-2:2009+A1:2010. Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C)Pipes
BS EN ISO 15877-3:2003. Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C)Fittings
BS EN ISO 15877-3:2009+A1:2010. Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C)Fittings
BS EN ISO 15877-5:2003. Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C)Fitness for purpose of the system
BS EN ISO 15877-5:2009+A1:2010. Plastics piping systems for hot and cold water installations. Chlorinated poly (vinyl chloride) (PVC-C)Fitness for purpose of the system
BS EN ISO 15880:2004, BS 6782-17:2001. Paints, varnishes and binders. Determination of MEQ value of water-based coating materials and binders
BS EN ISO 15882:2003. Sterilization of health care products. Chemical indicators. Guidance for selection, use and interpretation of results
BS EN ISO 15882:2008. Sterilization of health care products. Chemical indicators. Guidance for selection, use and interpretation of results
BS EN ISO 15883-1:2006. Washer-disinfectorsGeneral requirements, terms and definitions and tests
BS EN ISO 15883-1:2009. Washer-disinfectorsGeneral requirements, terms and definitions and tests
BS EN ISO 15883-2:2006. Washer-disinfectorsRequirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc.
BS EN ISO 15883-2:2009. Washer-disinfectorsRequirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc.
BS EN ISO 15883-3:2006. Washer-disinfectorsRequirements and tests for washer-disinfectors employing thermal disinfection for human waste containers
BS EN ISO 15883-3:2009. Washer-disinfectorsRequirements and tests for washer-disinfectors employing thermal disinfection for human waste containers
BS EN ISO 15883-4:2008. Washer-disinfectorsRequirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes
BS EN ISO 15883-4:2009. Washer-disinfectorsRequirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes
BS EN ISO 15883-6:2011. Washer-disinfectorsRequirements and tests for washer-disinfectors employing thermal disinfection for noninvasive, non-critical medical devices and healthcare equipment
BS EN ISO 15902:2005. Optics and photonics. Diffractive optics. Vocabulary
BS EN ISO 15908:2002. Adhesives for thermoplastic piping systems. Test method for the determination of thermal stability of adhesives
BS EN ISO 15912:2006+A1:2011. Dentistry. Casting investments and refractory die materials
BS EN ISO 15913:2003. Water quality. Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization
BS EN ISO 15914:2005. Animal feeding stuffs. Enzymatic determination of total starch content
BS EN ISO 15927-1:2003. Hygrothermal performance of buildings. Calculation and presentation of climatic data.Monthly means of single meteorological elements
BS EN ISO 15927-2:2009. Hygrothermal performance of buildings. Calculation and presentation of climatic dataHourly data for design cooling load
BS EN ISO 15927-3:2009. Hygrothermal performance of buildings. Calculation and presentation of climatic dataCalculation of a driving rain index for vertical surfaces from hourly wind and rain data
BS EN ISO 15927-4:2005. Hygrothermal performance of buildings. Calculation and presentation of climatic dataHourly data for assessing the annual energy use for heating and cooling
BS EN ISO 15927-5:2004+A1:2011. Hygrothermal performance of buildings. Calculation and presentation of climatic dataData for design heat load for space heating
BS EN ISO 15927-6:2007. Hygrothermal performance of buildings. Calculation and presentation of climatic dataAccumulated temperature differences (degree days)
BS EN ISO 15952:2011. Soil quality. Effects of pollutants on juvenile land snails (Helicidae). Determination of the effects on growth by soil contamination
BS EN ISO 1597:2000. Plastics. Unplasticized cellulose acetate. Determination of acetic acid yield
BS EN ISO 15973:2001. Closed and blind rivets with break pull mandrel and protruding head. AIA/St
BS EN ISO 15974:2001. Closed and blind rivets with break pull mandrel and countersunk head. AIA/St
BS EN ISO 15975:2002. Closed end blind rivets with break pull mandrel and protruding head. AI/AIA
BS EN ISO 15976:2002. Closed end blind rivets with break pull mandrel and protruding head. St/St
BS EN ISO 15977:2002. Open end blind rivets with break pull mandrel and protruding head. AIA/St
BS EN ISO 15978:2002. Open end blind rivets with break pull mandrel and countersunk head. AIA/St
BS EN ISO 15979:2002. Open end blind rivets with break pull mandrel and protruding head. St/St
BS EN ISO 1598:2000. Plastics. Cellulose acetate. Determination of insoluble particles
BS EN ISO 15980:2002. Open end blind rivets with break pull mandrel and countersunk head. St/St
BS EN ISO 15981:2002. Open end blind rivets with break pull mandrel and protruding head. AIA/AIA
BS EN ISO 15982:2002. Open end blind rivets with break pull mandrel and countersunk head. AIA/AIA
BS EN ISO 15983:2002. Open end blind rivets with break pull mandrel and protruding head. A2/A2
BS EN ISO 15984:2002. Open end blind rivets with break pull mandrel and countersunk head. A2/A2
BS EN ISO 1599:1999. Plastics. Cellulose acetate. Determination of viscosity loss on moulding
BS EN ISO 15995:2010. Gas cylinders. Specifications and testing of LPG cylinder valves. Manually operated
BS EN ISO 15996:2005+A1:2007. Gas cylinders. Residual pressure valves. General requirements and type testing
BS EN ISO 1600:1999. Plastics. Cellulose acetate. Determination of light absorption of moulded specimens produced using different periods of heating
BS EN ISO 16000-1:2006. Indoor airGeneral aspects of sampling strategy
BS EN ISO 16000-10:2006. Indoor airDetermination of the emission of volatile organic compounds from building products and furnishing. Emission test cell method
BS EN ISO 16000-11:2006. Indoor airDetermination of the emission of volatile organic compounds from building products and furnishing. Sampling, storage of samples and preparation of test specimens
BS EN ISO 16000-12:2008. Indoor airSampling strategy for polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polycyclic aromatic hydrocarbons (PAHs)
BS EN ISO 16000-15:2008. Indoor airSampling strategy for nitrogen dioxide (NO2)
BS EN ISO 16000-2:2006. Indoor airSampling strategy for formaldehyde
BS EN ISO 16000-5:2007. Indoor airSampling strategy for volatile organic compounds (VOCs)
BS EN ISO 16000-7:2007. Indoor airSampling strategy for determination of airborne asbestos fibre concentrations
BS EN ISO 16000-9:2006. Indoor airDetermination of the emission of volatile organic compounds from building products and furnishing. Emission test chamber method
BS EN ISO 16014-5:2012. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatographyMethod using light-scattering detection
BS EN ISO 16017-1:2001. Indoor, ambient and workplace air. Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatographyPumped sampling
BS EN ISO 16017-2:2003. Indoor, ambient and workplace air. Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatographyDiffusive sampling
BS EN ISO 16021:2001. Urine-absorbing aids. Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers
BS EN ISO 16032:2004. Acoustics. Measurement of sound pressure level from service equipment in buildings. Engineering method
BS EN ISO 16035:2005. Animal and vegetable fats and oils. Determination of low-boiling halogenated hydrocarbons in edible oils
BS EN ISO 16047:2005+A1:2012. Fasteners. Torque/clamp force testing
BS EN ISO 16048:2003. Passivation of corrosion-resistant stainless-steel fasteners
BS EN ISO 16050:2011. Foodstuffs. Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products. High-performance liquid chromatographic method
BS EN ISO 16054:2002. Implants for surgery. Minimum data sets for surgical implants
BS EN ISO 16061:2008. Instrumentation for use in association with non-active surgical implants. General requirements
BS EN ISO 16061:2009. Instrumentation for use in association with non-active surgical implants. General requirements
BS EN ISO 16070:2002. Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples
BS EN ISO 16070:2005. Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples
BS EN ISO 16072:2011. Soil quality. Laboratory methods for determination of microbial soil respiration
BS EN ISO 16091:2002. Space systems. Integrated logistic support
BS EN ISO 16101:2004. Packaging. Transport packaging for dangerous goods. Plastics compatibility testing
BS EN ISO 16103:2005. Packaging. Transport packages for dangerous goods. Recycled plastics material
BS EN ISO 16104:2003. Packaging. Transport packaging for dangerous goods. Test methods
BS EN ISO 16106:2006. Packaging. Transport packages for dangerous goods. Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings. Guidelines for the application of ISO 9001
BS EN ISO 16119-1:2013. Agricultural and forestry machinery. Environmental requirements for sprayersGeneral
BS EN ISO 16119-2:2013. Agricultural and forestry machinery. Environmental requirements for sprayersHorizontal boom sprayers
BS EN ISO 16119-3:2013. Agricultural and forestry machinery. Environmental requirements for sprayersSprayers for bush and tree crops
BS EN ISO 16120-1:2011. Non-alloy steel wire rod for conversion to wireGeneral requirements
BS EN ISO 16120-2:2011. Non-alloy steel wire rod for conversion to wireSpecific requirements for general-purpose wire rod
BS EN ISO 16120-3:2011. Non-alloy steel wire rod for conversion to wireSpecific requirements for rimmed and rimmed substitute, low-carbon steel wire rod
BS EN ISO 16120-4:2011. Non-alloy steel wire rod for conversion to wireSpecific requirements for wire rod for special applications
BS EN ISO 16133:2011. Soil quality. Guidance on the establishment and maintenance of monitoring programmes
BS EN ISO 16135:2006. Industrial valves. Ball valves of thermoplastic materials
BS EN ISO 16136:2006. Industrial valves. Butterfly valves of thermoplastic materials
BS EN ISO 16137:2006. Industrial valves. Check valves of thermoplastic materials
BS EN ISO 16138:2006. Industrial valves. Diaphragm valves of thermoplastics materials
BS EN ISO 16139:2006. Industrial valves. Gate valves of thermoplastic materials
BS EN ISO 16140:2003+A1:2011. Microbiology of food and animal feeding stuffs. Protocol for the validation of alternative methods
BS EN ISO 16147:2002+A1:2013. Small craft. Inboard diesel engines. Engine-mounted fuel and electrical components
BS EN ISO 16148:2006. Gas cylinders. Refillable seamless gas cylinders. Acoustic emission testing (AT) for periodic inspection
BS EN ISO 16151:2008. Corrosion of metals and alloys. Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions
BS EN ISO 16177:2012. Footwear. Resistance to crack initiation and growth. Belt flex method
BS EN ISO 16180:2013. Small craft. Navigation lights. Installation, placement and visibility
BS EN ISO 16187:2013. Footwear and footwear components. Test method to assess antibacterial activity
BS EN ISO 16201:2006. Technical aids for disabled persons. Environmental control systems for daily living
BS EN ISO 16212:2011. Cosmetics. Microbiology. Enumeration of yeast and mould
BS EN ISO 1622-1:2000. Plastics. Polystrene (PS) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 1622-1:2012. Plastics. Polystyrene (PS) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 1622-2:1999. Plastics. Polystrene (PS) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 16231-1:2013. Self-propelled agricultural machinery. Assessment of stabilityPrinciples
BS EN ISO 1624:1997. Plastics. Vinyl chloride homopolymer and copolymer resins. Sieve analysis in water
BS EN ISO 1624:2002. Plastics. Vinyl chloride homopolymer and copolymer resins. Sieve analysis in water
BS EN ISO 16256:2012. Clinical laboratory testing and in vitro diagnostic test systems. Reference method for testing the in vitro activity of antimicrobial agents against yeast of fungi involved in infectious diseases
BS EN ISO 16264:2004, BS 6068-2.78:2002. Water quality. Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection
BS EN ISO 16265:2012. Water quality. Determination of the methylene blue active substances (MBAS) index. Method using continuous flow analysis (CFA)
BS EN ISO 16266:2008. Water quality. Detection and enumeration of Pseudomonas aeruginosa. Method by membrane filtration
BS EN ISO 16276-1:2007. Corrosion protection of steel structures by protective paint systems. Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coatingPull-off testing
BS EN ISO 16276-2:2007. Corrosion protection of steel structures by protective paint systems. Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coatingCross-cut testing and X-cut testing
BS EN ISO 1628-1:1998, BS 2782-7:Method 732A:1998. Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometersGeneral principles
BS EN ISO 1628-1:2009+A1:2012. Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometersGeneral principles
BS EN ISO 1628-2:2000. Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometersPoly(vinyl chloride) resins
BS EN ISO 16282:2008. Methods of test for dense shaped refractory products. Determination of resistance to abrasion at ambient temperature
BS EN ISO 1628-3:2000. Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometersPolyethylenes and polypropylenes
BS EN ISO 1628-3:2003. Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometersPolyethylenes and polypropylenes
BS EN ISO 1628-3:2010. Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometersPolyethylenes and polypropylenes
BS EN ISO 16284:2001. Ophthalmic optics. Information interchange for ophthalmic optical equipment
BS EN ISO 16284:2006. Ophthalmic optics. Information interchange for ophthalmic optical equipment
BS EN ISO 16330:2003. Reciprocating positive displacement pumps and pump units. Technical requirements
BS EN ISO 16348:2003. Metallic and other inorganic coatings. Definitions and conventions concerning appearance
BS EN ISO 16426:2002. Fasteners. Quality assurance system
BS EN ISO 16432:2007. Resistance welding. Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s)
BS EN ISO 16433:2007. Resistance welding. Procedure for seam welding of uncoated and coated low carbon steels
BS EN ISO 16467:2003. Packaging. Transport packaging for dangerous goods. Test methods for IBCs
BS EN ISO 16472:2006. Animal feeding stuffs. Determination of amylase-treated neutral detergent fibre content (aNDF)
BS EN ISO 16484-1:2010. Building automation and control systems (BACS)Project specification and implementation
BS EN ISO 16484-2:2004. Building automation and control systems (BACS)Hardware
BS EN ISO 16484-3:2005. Building automation and control systems (BACS)Functions
BS EN ISO 16484-5:2003. Building automation and control systemsData communication protocol
BS EN ISO 16484-5:2008+A1:2009. Building automation and control systemsData communication protocol
BS EN ISO 16484-5:2010. Building automation and control systemsData communication protocol
BS EN ISO 16484-5:2012. Building automation and control systemsData communication protocol
BS EN ISO 16484-6:2005. Building automation and control systems (BACS)Data communication conformance testing
BS EN ISO 16484-6:2009. Building automation and control systems (BACS)Data communication conformance testing
BS EN ISO 16495:2013. Packaging. Transport packaging for dangerous goods. Test methods
BS EN ISO 16498:2013. Dentistry. Minimal dental implant data set for clinical use
BS EN ISO 16582:2002. Open end blind rivets with break pull mandrel and protruding head. Cu/St or Cu/Br or Cu/SSt
BS EN ISO 16583:2002. Open end blind rivets with break pull mandrel and countersunk head. Cu/St or Cu/Br or Cu/SSt
BS EN ISO 16584:2002. Open end blind rivets with break pull mandrel and protruding head. NiCu/St or NiCu/SSt
BS EN ISO 16585:2002. Closed end blind rivets with pull mandrel and protruding head. A2/SSt
BS EN ISO 16588:2003+A1:2005, BS 6068-2.82:2003. Water quality. Determination of six complexing agents. Gas-chromatographic method
BS EN ISO 16591:2010, BS 2000-373:2010. Petroleum products. Determination of sulfur content. Oxidative microcoulometry method
BS EN ISO 1660:1996, BS 308-2.3:1995. Technical drawings. Dimensioning and tolerancing of profiles
BS EN ISO 16610-21:2012. Geometrical product specifications (GPS). FiltrationLinear profile filters: Gaussian filters
BS EN ISO 16610-85:2013. Geometrical product specifications (GPS). FiltrationMorphological areal filters: Segmentation
BS EN ISO 16634-1:2008. Food products. Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein contentOilseeds and animal feeding stuffs
BS EN ISO 16654:2001. Microbiology of food and animal feeding stuffs. Horizontal method for the detection of Escherichia coli O157
BS EN ISO 1666:1994. Starch. Determination of moisture content. Oven-drying methods
BS EN ISO 1666:1998. Starch. Determination of moisture content. Oven-drying method
BS EN ISO 16663-1:2003. Fishing nets. Method of test for the determination of mesh sizeOpening of mesh
BS EN ISO 16663-1:2009. Fishing nets, Method of test for the determination of mesh sizeOpening of mesh
BS EN ISO 16663-2:2003. Fishing nets. Method of test for the determination of mesh sizeLength of mesh
BS EN ISO 16664:2008. Gas analysis. Handling of calibration gases and gas mixtures. Guidelines
BS EN ISO 16665:2005, BS 6068-5.38:2005. Water quality. Guidelines for quantitative sampling and sample processing of marine soft-bottom macro-fauna
BS EN ISO 16671:2003. Ophthalmic implants. Irrigating solutions for ophthalmic surgery
BS EN ISO 16672:2003. Ophthalmic implants. Ocular endotamponades
BS EN ISO 16701:2008. Corrosion of metals and alloys. Corrosion in artificial atmosphere. Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
BS EN ISO 16708:2006. Petroleum and natural gas industries. Pipeline transportation systems. Reliability-based limit state methods
BS EN ISO 16712:2006, BS 6068-5.37:2005. Water quality. Determination of acute toxicity of marine or estuarine sediment to amphipods
BS EN ISO 16720:2007. Soil quality. Pretreatment of samples by freeze-drying for subsequent analysis
BS EN ISO 16744:2003. Dentistry. Base metal materials for fixed dental restorations
BS EN ISO 1675:1998, BS 2782-6:Method 620E:1998
BS EN ISO 1675:1998, BS 2782-6:Method 620E:1998. Plastics. Liquid resins. Determination of density by the pyknometer method
BS EN ISO 16773-1:2007. Paints and varnishes. Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimensTerms and definitions
BS EN ISO 16773-2:2007. Paints and varnishes. Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimensCollection of data
BS EN ISO 16773-3:2009. Paints and varnishes. Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimensProcessing and analysis of data from dummy cells
BS EN ISO 16773-4:2009. Paints and varnishes. Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimensExamples of spectra of polymer-coated specimens
BS EN ISO 16784-1:2008. Corrosion of metals and alloys. Corrosion and fouling in industrial cooling water systemsGuidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems
BS EN ISO 16784-2:2008. Corrosion of metals and alloys. Corrosion and fouling in industrial cooling water systemsEvaluation of the performance of cooling water treatment programmes using a pilot-scale test rig
BS EN ISO 1680:2000. Acoustics. Test code for the measurement of airborne noise emitted by rotating electrical machinery
BS EN ISO 16805:2005. Binders for paints and varnishes. Determination of glass transition temperature
BS EN ISO 16812:2003. Petroleum and natural gas industries. Shell-and-tube heat exchangers
BS EN ISO 16812:2007. Petroleum, petrochemical and natural gas industries. Shell-and-tube heat exchangers
BS EN ISO 1683:2008. Acoustics. Preferred reference values for acoustical and vibratory levels
BS EN ISO 16834:2007. Welding consumables. Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels. Classification
BS EN ISO 16834:2012. Welding consumables. Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels. Classification
BS EN ISO 16851:2004. Textile conveyor belts. Determination of the net length of an endless (spliced) conveyor belt
BS EN ISO 16851:2013. Textile conveyor belts. Determination of the net length of an endless (spliced) conveyor belt
BS EN ISO 16852:2010. Flame arresters. Performance requirements, test methods and limits for use
BS EN ISO 16862:2006. Paints and varnishes. Evaluation of sag resistance
BS EN ISO 16871:2003. Plastics piping and ducting systems. Plastics pipes and fittings. Method for exposure to direct (natural) weathering
BS EN ISO 16911-1:2013. Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ductsManual reference method
BS EN ISO 16911-2:2013. Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ductsAutomated measuring systems
BS EN ISO 16931:2001. Animal and vegetable fats and oils. Determination of polymerized triglycerides content by high performance size-exclusion chromatography (HPSEC)
BS EN ISO 16931:2009. Animal and vegetable fats and oils. Determination of polymerized triacylglycerols by high-performance size- exclusion chromatography (HPSEC)
BS EN ISO 17059:2009. Oilseeds. Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method)
BS EN ISO 17070:2006. Leather. Chemical tests. Determination of pentachlorophenol content
BS EN ISO 17071:2011. Leather. Physical and mechanical tests. Determination of fogging characteristics
BS EN ISO 17072-1:2011. Leather. Chemical determination of metal contentExtractable metals
BS EN ISO 17072-2:2011. Leather. Chemical determination of metal contentTotal metal content
BS EN ISO 17074:2011. Leather. Physical and mechanical tests. Determination of resistance to horizontal spread of flame
BS EN ISO 17075:2007. Leather. Chemical tests. Determination of chromium(VI) content
BS EN ISO 17076-1:2012. Leather. Determination of abrasion resistanceTaber method
BS EN ISO 17076-2:2011. Leather. Determination of abrasion resistanceMartindale ball plate method
BS EN ISO 17078-1:2004+A1:2010. Petroleum and natural gas industries. Drilling and production equipmentSide-pocket mandrels
BS EN ISO 17078-2:2007. Petroleum and natural gas industries. Drilling and production equipmentFlow-control devices for side-pocket mandrels
BS EN ISO 17078-3:2009. Petroleum and natural gas industries. Drilling and production equipmentRunning tools, pulling tools and kick-over tools and latches for side-pocket mandrels
BS EN ISO 17078-4:2010. Petroleum and natural gas industries. Drilling and production equipmentPractices for side-pocket mandrels and related equipment CD-ROM
BS EN ISO 17081:2008. Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
BS EN ISO 17130:2013. Leather. Physical and mechanical tests. Determination of dimensional change
BS EN ISO 17131:2012. Leather. Identification of leather with microscopy
BS EN ISO 17132:2007. Paints and varnishes. T-bend test
BS EN ISO 1716:2002. Reaction to fire tests for building products. Determination of the heat of combustion
BS EN ISO 1716:2010. Reaction to fire tests for products. Determination of the gross heat of combustion (calorific value)
BS EN ISO 17180:2013. Animal feeding stuffs. Determination of lysine, methionine and threonine in commercial amino acid products and premixtures
BS EN ISO 17186:2002. Leather. Physical and mechanical tests. Determination of surface coating thickness
BS EN ISO 17186:2011. Leather. Physical and mechanical tests. Determination of surface coating thickness
BS EN ISO 17189:2003. Butter, edible oil emulsions and spreadable fats. Determination of fat content (Reference method)
BS EN ISO 172:1998. Plastics. Phenol-formaldehyde mouldings. Detection of free ammonia
BS EN ISO 17201-1:2005. Acoustics. Noise from shooting rangesDetermination of muzzle blast by measurement
BS EN ISO 17201-2:2006. Acoustics. Noise from shooting rangesEstimation of muzzle blast and projectile sound by calculation
BS EN ISO 17201-3:2010. Acoustics. Noise from shooting rangesGuidelines for sound propagation calculations
BS EN ISO 17201-4:2006. Acoustics. Noise from shooting rangesPrediction of projectile sound
BS EN ISO 17201-5:2010. Acoustics. Noise from shooting rangesNoise management
BS EN ISO 17226-1:2008. Leather. Chemical determination of formaldehyde contentMethod using high performance liquid chromatography
BS EN ISO 17226-2:2008. Leather. Chemical determination of formaldehyde contentMethod using colorimetric analysis
BS EN ISO 17226-3:2011. Leather. Chemical determination of formaldehyde contentDetermination of formaldehyde emissions from leather
BS EN ISO 17227:2002. Leather. Physical and mechanical tests. Determination of dry heat resistance of leather
BS EN ISO 17229:2002. Leather. Physical and mechanical tests. Determination of water vapour absorption
BS EN ISO 17230:2011. Leather. Physical and mechanical tests. Determination of water penetration pressure
BS EN ISO 17231:2011. Leather. Physical and mechanical tests. Determination of water repellency of garment leather
BS EN ISO 17232:2009. Leather. Physical and mechanical tests. Determination of heat resistance of patent leather
BS EN ISO 17233:2002. Leather. Physical and mechanical tests. Determination of cold crack temperature of surface coatings
BS EN ISO 17234-1:2010. Leather. Chemical tests for the determination of certain azo colorants in dyed leathersDetermination of certain aromatic amines derived from azo colorants
BS EN ISO 17234-2:2011. Leather. Chemical tests for the determination of certain azo colorants in dyed leathersDetermination of 4-aminoazobenzene
BS EN ISO 17235:2002. Leather. Physical and mechanical tests. Determination of softness
BS EN ISO 17235:2011. Leather. Physical and mechanical tests. Determination of softness
BS EN ISO 17236:2002. Leather. Physical and mechanical tests. Determination of extension set
BS EN ISO 17249:2004. Safety footwear with resistance to chain saw cutting
BS EN ISO 17261:2012. Intelligent transport systems. Automatic vehicle and equipment identification. Intermodal goods transport architecture and terminology
BS EN ISO 17262:2012. Intelligent transport systems. Automatic vehicle and equipment identification. Numbering and data structures
BS EN ISO 17263:2012. Intelligent transport systems. Automatic vehicle and equipment identification. System parameters
BS EN ISO 17264:2009. Intelligent transport systems. Automatic vehicle and equipment identification. Interfaces
BS EN ISO 17287:2003. Road vehicles. Ergonomic aspects of transport information and control systems. Procedure for assessing suitability for use while driving
BS EN ISO 17292:2004. Metal ball valves for the petroleum, petrochemical and allied industries
BS EN ISO 17294-1:2006. Water quality. Application of inductively coupled plasma mass spectrometry (ICP-MS)General guidelines
BS EN ISO 17294-2:2004, BS 6068-2.89:2004. Water quality. Application of inductively coupled plasma mass spectrometry (ICP-MS)Determination of 62 elements
BS EN ISO 1735:2004. Cheese and processed cheese products. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 17353:2005. Water quality. Determination of selected organotin compounds. Gas chromatographic method
BS EN ISO 1736:2000, BS 1743-11:2000. Dried milk and dried milk products. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 1736:2008. Dried milk and dried milk products. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 1737:2000, BS 1742-3:2000. Evaporated milk and sweetened condensed milk. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 1737:2008. Evaporated milk and sweetened condensed milk. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 17380:2013. Soil quality. Determination of total cyanide and easily liberatable cyanide. Continuous-flow analysis method
BS EN ISO 17402:2011. Soil quality. Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials
BS EN ISO 1741:1995. Dextrose. Determination of loss in mass on drying. Vacuum oven method
BS EN ISO 17450-1:2011. Geometrical product specifications (GPS). General conceptsModel for geometrical specification and verification
BS EN ISO 17450-2:2012. Geometrical product specifications (GPS). General conceptsBasic tenets, specifications, operators, uncertainties and ambiguities
BS EN ISO 1746:2001. Rubber or plastics hoses and tubing. Bending tests
BS EN ISO 17475:2008. Corrosion of metals and alloys. Electrochemical test methods. Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
BS EN ISO 17491-3:2008. Protective clothing. Test methods for clothing providing protection against chemicalsDetermination of resistance to penetration by a jet of liquid (jet test)
BS EN ISO 17491-4:2008. Protective clothing. Test methods for clothing providing protection against chemicalsDetermination of resistance to penetration by a spray of liquid (spray test)
BS EN ISO 17495:2003. Water quality. Determination of selected nitrophenols. Method by solid-phase extraction and gas chromatography with mass spectrometric detection
BS EN ISO 175:2001, BS 2782-8:Method 830A:1999. Plastics. Methods of test for the determination of the effects of immersion in liquid chemicals
BS EN ISO 175:2010. Plastics. Methods of test for the determination of the effects of immersion in liquid chemicals
BS EN ISO 17502:2013. Leather. Determination of surface reflectance
BS EN ISO 17510-1:2002. Sleep apnoea breathing therapySleep apnoea breathing therapy devices
BS EN ISO 17510-1:2007. Sleep apnoea breathing therapySleep apnoea breathing therapy equipment
BS EN ISO 17510-1:2009. Sleep apnoea breathing therapySleep apnoea breathing therapy equipment
BS EN ISO 17510-2:2003. Sleep apnoea breathing therapyMasks and application accessories
BS EN ISO 17510-2:2007. Sleep apnoea breathing therapyMasks and application accessories
BS EN ISO 17510-2:2009. Sleep apnoea breathing therapyMasks and application accessories
BS EN ISO 17511:2003. In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of values assigned to calibrators and control materials
BS EN ISO 17526:2003. Optics and optical instruments. Lasers and laser-related equipment. Lifetime of lasers
BS EN ISO 17556:2004. Plastics. Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
BS EN ISO 17556:2012. Plastics. Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
BS EN ISO 176:2000. Plastics. Determination of loss of plasticizers. Activated carbon method
BS EN ISO 176:2005. Plastics. Determination of loss of plasticizers. Activated carbon method
BS EN ISO 17624:2004. Acoustics. Guidelines for noise control in offices and workrooms by means of acoustical screens
BS EN ISO 17632:2008. Welding consumables. Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels. Classification
BS EN ISO 17633:2006. Welding consumables. Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels. Classification
BS EN ISO 17633:2010. Welding consumables. Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels. Classification
BS EN ISO 17634:2006. Welding consumables. Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels. Classification
BS EN ISO 17635:2010. Non-destructive testing of welds. General rules for metallic materials
BS EN ISO 17636-1:2013. Non-destructive testing of welds. Radiographic testingX- and gamma-ray techniques with film
BS EN ISO 17636-2:2013. Non-destructive testing of welds. Radiographic testingX- and gamma-ray techniques with digital detectors
BS EN ISO 17637:2011. Non-destructive testing of welds. Visual testing of fusion-welded joints
BS EN ISO 17638:2009. Non-destructive testing of welds. Magnetic particle testing
BS EN ISO 17640:2010. Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment
BS EN ISO 17641-1:2004. Destructive tests on welds in metallic materials. Hot cracking tests for weldments. Arc welding processesGeneral
BS EN ISO 17641-2:2005. Destructive tests on welds in metallic materials. Hot cracking tests for weldments. Arc welding processesSelf-restraint tests
BS EN ISO 17642-1:2004. Destructive tests on welds in metallic materials. Cold cracking tests for weldments. Arc welding processesGeneral
BS EN ISO 17642-2:2005. Destructive tests on welds in metallic materials. Cold cracking tests for weldments. Arc welding processesSelf-restraint tests
BS EN ISO 17642-3:2005. Destructive tests on welds in metallic materials. Cold cracking tests for weldments. Arc welding processesExternally loaded tests
BS EN ISO 17652-1:2003. Welding. Test for shop primers in relation to welding and allied processesGeneral requirements
BS EN ISO 17652-2:2003. Welding. Test for shop primers in relation to welding and allied processesWelding properties of shop primers
BS EN ISO 17652-3:2003. Welding. Test for shop primers in relation to welding and allied processesThermal cutting
BS EN ISO 17652-4:2003. Welding. Test for shop primers in relation to welding and allied processesEmission of fumes and gases
BS EN ISO 17653:2003. Destructive tests on welds in metallic materials. Torsion test of resistance spot welds
BS EN ISO 17653:2012. Resistance welding. Destructive tests on welds in metallic materials. Torsion test of resistance spot welds
BS EN ISO 17654:2003. Destructive tests on welds in metallic materials. Resistance welding. Pressure test on resistance seam welds
BS EN ISO 17654:2011. Resistance welding. Destructive tests of welds. Pressure test of resistance seam welds
BS EN ISO 17655:2003. Destructive tests on welds in metallic materials. Method for taking samples for delta ferrite measurement
BS EN ISO 17657-1:2007. Resistance welding. Welding current measurement for resistance weldingGuidelines for measurement
BS EN ISO 17657-2:2007. Resistance welding. Welding current measurement for resistance weldingWelding current meter with current sensing coil
BS EN ISO 17657-3:2007. Resistance welding. Welding current measurement for resistance weldingCurrent sensing coil
BS EN ISO 17657-4:2007. Resistance welding. Welding current measurement for resistance weldingCalibration system
BS EN ISO 17657-5:2007. Resistance welding. Welding current measurement for resistance weldingVerification of welding current measuring system
BS EN ISO 17659:2004. Welding. Multilingual terms for welded joints with illustrations
BS EN ISO 17660-1:2006. Welding. Welding of reinforcing steelLoad-bearing welded joints
BS EN ISO 17660-2:2006. Welding. Welding of reinforcing steelNon load-bearing welded joints
BS EN ISO 17662:2005. Welding. Calibration, verification and validation of equipment used for welding, including ancillary activities
BS EN ISO 17663:2009. Welding. Quality requirements for heat treatment in connection with welding and allied processes
BS EN ISO 17664:2004. Sterilization of medical devices. Information to be provided by the manufacturer for the processing of resterilizable medical devices
BS EN ISO 17665-1:2006. Sterilization of health care products. Moist heatRequirements for the development, validation and routine control of a sterilization process for medical devices
BS EN ISO 17666:2003. Space systems. Risk management
BS EN ISO 17672:2010. Brazing. Filler metals
BS EN ISO 17677-1:2009. Resistance welding. VocabularySpot, projection and seam welding
BS EN ISO 17678:2010. Milk and milk products. Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method)
BS EN ISO 17693:2005. Footwear. Test methods for uppers. Resistance to damage on lasting
BS EN ISO 17695:2005. Footwear. Test methods for uppers. Deformability
BS EN ISO 177:2000. Plastics. Determination of migration of plasticizers
BS EN ISO 17700:2005. Footwear. Test methods for uppers, linings and insocks. Colour fastness to rubbing
BS EN ISO 17707:2005. Footwear. Test methods for outsoles. Flex resistance
BS EN ISO 17708:2003. Footwear. Test methods for whole shoe. Upper sole adhesion
BS EN ISO 17769-1:2012. Liquid pumps and installation. General terms, definitions, quantities, letter symbols and unitsLiquid pumps
BS EN ISO 17769-2:2012. Liquid pumps and installation. General terms, definitions, quantities, letter symbols and unitsPumping System
BS EN ISO 17776:2002. Petroleum and natural gas industries. Offshore production installations. Guidance on tools and techniques for hazard identification and risk assessment
BS EN ISO 178:1997, BS 2782-3:Method 335A:1993,ISO 178:1993. Plastics. Determination of flexural properties
BS EN ISO 178:2003. Plastics. Determination of flexural properties
BS EN ISO 178:2010+A1:2013. Plastics. Determination of flexural properties
BS EN ISO 17834:2003. Thermal spraying. Coatings for protection against corrosion and oxidation at elevated temperatures
BS EN ISO 17836:2004. Thermal spraying. Determination of the deposition efficiency
BS EN ISO 17852:2008, BS 6068-2.98:2006. Water quality. Determination of mercury. Method using a combined preservation and digestion step followed by atomic fluorescence spectrometry
BS EN ISO 17864:2008. Corrosion of metals and alloys. Determination of the critical pitting temperature under potientiostatic control
BS EN ISO 17872:2007. Paints and varnishes. Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
BS EN ISO 17895:2005. Paints and varnishes. Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC)
BS EN ISO 179:1997. Plastics. Determination of Charpy impact strength
BS EN ISO 179-1:1999. Plastics. Determination of Charpy impact propertiesNon-instrumented impact test
BS EN ISO 179-1:2001. Plastics. Determination of Charpy impact propertiesNon-instrumented impact test
BS EN ISO 179-1:2010. Plastics. Determination of Charpy impact propertiesNon-instrumented impact test
BS EN ISO 179-2:1999+A1:2012, BS 2782-3:Method 359B:1999. Plastics. Determination of Charpy impact properties Instrumented impact test
BS EN ISO 17932:2007. Animal and vegetable fats and oils. Determination of the deterioration of bleachability index (DOBI)
BS EN ISO 17932:2011. Palm oil. Determination of the deterioration of bleachability index (DOBI) and carotene content
BS EN ISO 1797-1:1995. Dental rotary instruments. ShanksShanks made of metals
BS EN ISO 1797-1:2011. Dentistry. Shanks for rotary instrumentsShanks made of metals
BS EN ISO 1797-2:1995. Dental rotary instruments. ShanksShanks made of plastics
BS EN ISO 1797-3:2013. Dentistry. Shanks for rotary instrumentsShanks made of ceramics
BS EN ISO 1798:2000. Flexible cellular polymeric materials. Determination of tensile strength and elongation at break
BS EN ISO 1798:2008. Flexible cellular polymeric materials. Determination of tensile strength and elongation at break
BS EN ISO 17993:2003, BS 6068-2.79:2002. Water quality. Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction
BS EN ISO 17994:2004, BS 6068-4.19:2004. Water quality. Criteria for establishing equivalence between microbiological methods
BS EN ISO 180:1997, BS 2782-3:Method 350:1993. Plastics. Determination of Izod impact strength
BS EN ISO 180:2000+A2:2013. Plastics. Determination of Izod impact strength
BS EN ISO 1805:2006. Fishing nets. Determination of breaking force and knot breaking force of netting yarns
BS EN ISO 1806:2002. Fishing nets. Determination of mesh breaking force of netting
BS EN ISO 18064:2005. Thermoplastic elastomers. Nomenclature and abbreviated terms
BS EN ISO 18104:2003. Health informatics. Integration of a reference terminology model for nursing
BS EN ISO 18113-1:2009. In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling)Terms, definitions and general requirements
BS EN ISO 18113-1:2011. In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling)Terms, definitions and general requirements
BS EN ISO 18113-2:2009. In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling)In vitro diagnostic reagents for professional use
BS EN ISO 18113-2:2011. In vitro diagnostic medical Devices. Information supplied by the manufacturer (labelling)In vitro diagnostic reagents for professional use
BS EN ISO 18113-3:2009. In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling)In vitro diagnostic instruments for professional use
BS EN ISO 18113-3:2011. In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling)In vitro diagnostic instruments for professional use
BS EN ISO 18113-4:2009. In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling)In vitro diagnostic reagents for self-testing
BS EN ISO 18113-4:2011. In vitro diagnostic medical Devices. Information supplied by the manufacturer (labelling)In vitro diagnostic reagents for self-testing
BS EN ISO 18113-5:2009. In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling)In vitro diagnostic instruments for self-testing
BS EN ISO 18113-5:2011. In vitro diagnostic medical Devices. Information supplied by the manufacturer (labelling)In vitro diagnostic instruments for self-testing
BS EN ISO 18153:2003. In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials
BS EN ISO 182-2:2000. Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperaturespH method
BS EN ISO 182-3:2000. Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperaturesConductometric method
BS EN ISO 18233:2006. Acoustics. Application of new measurement methods in building and room acoustics
BS EN ISO 182-4:2000. Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperaturesPotentiometric method
BS EN ISO 182-4:2001. Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperaturesPotentiometric method
BS EN ISO 1825:2011. Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling. Specification
BS EN ISO 18265:2003. Metallic materials. Conversion of hardness values
BS EN ISO 18265:2013. Metallic materials. Conversion of hardness values
BS EN ISO 18273:2004. Welding consumables. Wire electrodes, wires and rods for welding of aluminium and aluminium alloys. Classification
BS EN ISO 18274:2004. Welding consumables. Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys. Classification
BS EN ISO 18274:2010. Welding consumables. Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys. Classification
BS EN ISO 18275:2012. Welding consumables. Covered electrodes for manual metal arc welding of high-strength steels. Classification
BS EN ISO 18276:2006. Welding consumables. Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels. Classification
BS EN ISO 18278-1:2004. Resistance welding. WeldabilityAssessment of weldability for resistance spot, seam and projection welding of metallic materials
BS EN ISO 18278-2:2004. Resistance welding. WeldabilityAlternative procedures for the assessment of steel sheets for spot welding
BS EN ISO 18279:2003. Brazing. Imperfections in brazed joints
BS EN ISO 1828:2012. Health informatics. Categorial structure for terminological systems of surgical procedures
BS EN ISO 18286:2010. Hot-rolled stainless steel plates. Tolerances on dimensions and shape
BS EN ISO 183:2000. Plastics. Qualitative evaluation of the bleeding of colorants
BS EN ISO 18330:2003. Milk and milk products. Guidelines for the standardized description of immunoassays or receptor assays for the detection of antimicrobial residues
BS EN ISO 1833-1:2010. Textiles. Quantitative chemical analysisGeneral principles of testing
BS EN ISO 1833-10:2010. Textiles. Quantitative chemical analysisMixtures of triacetate or polylactide and certain other fibres (method using dichloromethane)
BS EN ISO 1833-11:2010. Textiles. Quantitative chemical analysisMixtures of cellulose and polyester fibres (method using sulfuric acid)
BS EN ISO 1833-12:2010. Textiles. Quantitative chemical analysisMixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide)
BS EN ISO 1833-13:2010. Textiles. Quantitative chemical analysisMixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone)
BS EN ISO 1833-14:2010. Textiles. Quantitative chemical analysisMixtures of acetate and certain chlorofibres (method using acetic acid)
BS EN ISO 1833-15:2010. Textiles. Quantitative chemical analysisMixtures of jute and certain animal fibres (method by determining nitrogen content)
BS EN ISO 1833-16:2010. Textiles. Quantitative chemical analysisMixtures of polypropylene fibres and certain other fibres (method using xylene)
BS EN ISO 1833-17:2010. Textiles. Quantitative chemical analysisMixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid)
BS EN ISO 1833-18:2010. Textiles. Quantitative chemical analysisMixtures of silk and wool or hair (method using sulfuric acid)
BS EN ISO 1833-19:2010. Textiles. Quantitative chemical analysisMixtures of cellulose fibres and asbestos (method by heating)
BS EN ISO 18332:2008. Metallic and other inorganic coatings. Definitions and conventions concerning porosity
BS EN ISO 1833-2:2010. Textiles. Quantitative chemical analysisTernary fibre mixtures
BS EN ISO 1833-20:2010. Textiles. Quantitative chemical analysisMixtures of elastane and certain other fibres (method using dimethylacetamide)
BS EN ISO 1833-21:2010. Textiles. Quantitative chemical analysisMixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone)
BS EN ISO 1833-22:2013. Textiles. Quantitative chemical analysisMixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chloride)
BS EN ISO 1833-24:2011. Textiles. Quantitative chemical analysisMixtures of polyester and certain other fibres (method using phenol and tetrachloroethane)
BS EN ISO 1833-25:2013. Textiles. Quantitative chemical analysisMixtures of polyester and certain other fibres (method using trichloroacetic acid and chloroform)
BS EN ISO 1833-26:2013. Textiles. Quantitative chemical analysisMixtures of melamine and cotton or aramide fibres (method using hot formic acid)
BS EN ISO 1833-3:2010. Textiles. Quantitative chemical analysisMixtures of acetate and certain other fibres (method using acetone)
BS EN ISO 1833-4:2010. Textiles. Quantitative chemical analysisMixtures of certain protein and certain other fibres (method using hypochlorite)
BS EN ISO 1833-5:2010. Textiles. Quantitative chemical analysisMixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate)
BS EN ISO 1833-6:2010. Textiles. Quantitative chemical analysisMixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride)
BS EN ISO 1833-7:2010. Textiles. Quantitative chemical analysisMixtures of polyamide and certain other fibres (method using formic acid)
BS EN ISO 1833-8:2010. Textiles. Quantitative chemical analysisMixtures of acetate and triacetate fibres (method using acetone)
BS EN ISO 1833-9:2010. Textiles. Quantitative chemical analysisMixtures of acetate and triacetate fibres (method using benzyl alcohol)
BS EN ISO 18369-1:2006+A1:2009. Ophthalmic optics. Contact lensesVocabulary, classification system and recommendations for labelling specifications
BS EN ISO 18369-2:2006. Ophthalmic optics. Contact lensesTolerances
BS EN ISO 18369-2:2012. Ophthalmic optics. Contact lensesTolerances
BS EN ISO 18369-3:2006. Ophthalmic optics. Contact lensesMeasurement methods
BS EN ISO 18369-4:2006. Ophthalmic optics. Contact lensesPhysicochemical properties of contact lens materials
BS EN ISO 18395:2007. Animal and vegetable fats and oils. Determination of monoacylglycerols, diacylglycerols, triacylglycerols and glycerol by high-performance size-exclusion chromatography (HPSEC)
BS EN ISO 18412:2006. Water quality. Determination of chromium (VI). Photometric method for weakly contaminated water
BS EN ISO 18415:2011. Cosmetics. Microbiology. Detection of specified and non-specified microorganisms
BS EN ISO 18416:2009. Cosmetics. Microbiology. Detection of Candida albicans
BS EN ISO 18453:2005. Natural gas. Correlation between water content and water dew point
BS EN ISO 18472:2006. Sterilization of health care products. Biological and chemical indicators. Test equipment and methods
BS EN ISO 18513:2003. Tourism services. Hotels and other types of tourism accommodation. Terminology
BS EN ISO 1854:2000. Whey cheese. Determination of fat content. Gravimetric method (reference method)
BS EN ISO 1854:2008. Whey cheese. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 18542-1:2012. Road vehicles. Standardized repair and maintenance information (RMI) terminologyGeneral information and use case definition
BS EN ISO 1856:1996. Polymeric materials, cellular flexible. Determination of compression set
BS EN ISO 1856:2001. Flexible cellular polymeric materials. Determination of compression set
BS EN ISO 18592:2009. Resistance welding. Destructive testing of welds. Method for the fatigue testing of multispot- welded specimens
BS EN ISO 18594:2007. Resistance spot-, projection- and seam-welding. Method for determining the transition resistance on aluminium and steel material
BS EN ISO 18595:2007. Resistance welding. Spot welding of aluminium and aluminium alloys. Weldability, welding and testing
BS EN ISO 186:1996. Paper and board. Sampling to determine average quality
BS EN ISO 186:2002. Paper and board. Sampling to determine average quality
BS EN ISO 18609:2001, BS 684-2.51:2001. Animal and vegetable fats and oils. Determination of unsaponifiable matter. Method using hexane extraction
BS EN ISO 18613:2003. Repair of flat wooden pallets
BS EN ISO 1872-1:1999. Polyethylene (PE) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 1872-2:1997. Polyethylene (PE) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 1872-2:2007. Plastics. Polyethylene (PE) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 1873-1:1995. Plastics. Polypropylene (PP) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 1873-2:1997. Plastics. Polypropylene (PP) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 1873-2:2007. Plastics. Polypropylene (PP) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 1874-1:2001. Plastics. Polyamide (PA) moulding and extrusion materialsDesignation
BS EN ISO 1874-1:2010. Plastics. Polyamide (PA) moulding and extrusion materialsDesignation system and basis for specification
BS EN ISO 1874-2:1996. Plastics. Polyamide (PA) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 1874-2:2006+A1:2010. Plastics. Polyamide (PA) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 1874-2:2012. Plastics. Polyamide (PA) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 18753:2005. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of absolute density of ceramic powders by pyknometer
BS EN ISO 18756:2005. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method
BS EN ISO 18757:2005. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of specific surface area of ceramic powders by gas adsorption using the BET method
BS EN ISO 18777:2005. Transportable liquid oxygen systems for medical use. Particular requirements
BS EN ISO 18777:2009. Transportable liquid oxygen systems for medical use. Particular requirements
BS EN ISO 18778:2005. Respiratory equipment. Infant monitors. Particular requirements
BS EN ISO 18778:2009. Respiratory equipment. Infant monitors. Particular requirements
BS EN ISO 18779:2005. Medical devices for conserving oxygen and oxygen mixtures. Particular requirements
BS EN ISO 18812:2003. Health informatics. Clinical analyser interfaces to laboratory information systems. Use profiles
BS EN ISO 18856:2005, BS 6068-2.94:2005. Water quality. Determination of selected phthalates using gas chromatography/mass spectrometry
BS EN ISO 18857-1:2006, 6068-2.92:2005. Water quality. Determination of selected alkylphenols. Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection
BS EN ISO 18857-2:2011. Water quality. Determination of selected alkylphenols Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples following solid-phase extraction and derivatisation
BS EN ISO 1886:1995, BS 2782-10:Method 1007:1995. Reinforcement fibres. Sampling plans applicable to received batches
BS EN ISO 1889:1997. Reinforcement yarns. Determination of linear density
BS EN ISO 1889:2009. Reinforcement yarns. Determination of linear density
BS EN ISO 1890:1997. Reinforcement yarns. Determination of twist
BS EN ISO 1890:2009. Reinforcement yarns. Determination of twist
BS EN ISO 1893:2008. Refractory products. Determination of refractoriness under load. Differential method with rising temperature
BS EN ISO 19001:2013. In vitro diagnostic medical devices. Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology
BS EN ISO 19011:2002 (A5 Laminated)
BS EN ISO 19011:2002. Guidelines for quality and/or environmental management systems auditing
BS EN ISO 19011:2011 (A5 Laminated). Guidelines for auditing management systems
BS EN ISO 19011:2011. Guidelines for auditing management systems
BS EN ISO 19019:2005. Sea-going vessels and marine technology. Instructions for planning, carrying out and reporting sea trials
BS EN ISO 19054:2006. Rail systems for supporting medical equipment
BS EN ISO 19101:2005. Geographic information. Reference model
BS EN ISO 19105:2005. Geographic information. Conformance and testing
BS EN ISO 19106:2006. Geographic information. Profiles
BS EN ISO 19107:2005. Geographic information. Spatial schema
BS EN ISO 19108:2005. Geographic information. Temporal schema
BS EN ISO 19109:2006. Geographic information. Rules for application schema
BS EN ISO 19110:2006+A1:2011. Geographic information. Methodology for feature cataloguing
BS EN ISO 19111:2005. Geographic information. Spatial referencing by coordinates
BS EN ISO 19111:2007. Geographic information. Spatial referencing by coordinates
BS EN ISO 19111-2:2012. Geographic information. Spatial referencing by coordinatesExtension for parametric values
BS EN ISO 19112:2005. Geographic information. Spatial referencing by geographic identifiers
BS EN ISO 19113:2005. Geographic information. Quality principles
BS EN ISO 19114:2005. Geographic information. Quality evaluation procedures
BS EN ISO 19115:2005. Geographic information. Metadata
BS EN ISO 19115-2:2010. Geographic information. MetadataExtensions for imagery and gridded data
BS EN ISO 19116:2006. Geographic information. Positioning services
BS EN ISO 19117:2006. Geographic information. Portrayal
BS EN ISO 19118:2006. Geographic information. Encoding
BS EN ISO 19118:2011. Geographic information. Encoding
BS EN ISO 19119:2006+A1:2011. Geographic information. Services
BS EN ISO 19123:2007. Geographic information. Schema for coverage geometry and functions
BS EN ISO 19125-1:2006. Geographic information. Simple feature accessCommon architecture
BS EN ISO 19125-2:2006. Geographic information. Simple feature accessSQL option
BS EN ISO 19126:2009. Geographic information. Feature concept dictionaries and registers
BS EN ISO 19128:2008. Geographic information. Web map server interface
BS EN ISO 19131:2008+A1:2011. Geographic information. Data product specifications
BS EN ISO 19132:2008. Geographic information. Location based services. Reference model
BS EN ISO 19133:2007. Geographic information. Location based services. Tracking and navigation
BS EN ISO 19134:2008. Geographic information. Location-based services. Multimodal routing and navigation
BS EN ISO 19135:2007. Geographic information. Procedures for item registration
BS EN ISO 19136:2009. Geographic information. Geography Markup Language (GML)
BS EN ISO 19137:2008. Geographic information. Core profile of the spatial schema
BS EN ISO 19141:2009. Geographic information. Schema for moving features
BS EN ISO 19142:2010. Geographic information. Web feature service
BS EN ISO 19143:2012. Geographic information. Filter encoding
BS EN ISO 19144-1:2012. Geographic information. Classification systemsClassification system structure
BS EN ISO 19146:2010. Geographic information. Cross-domain vocabularies
BS EN ISO 19148:2012. Geographic information. Linear referencing
BS EN ISO 19152:2012. Geographic information. Land Administration Domain Model (LADM)
BS EN ISO 19156:2013. Geographic information. Observations and measurements
BS EN ISO 19219:2003. Animal and vegetable fats and oils. Determination of visible foots in crude fats and oils
BS EN ISO 1923:1995. Cellular plastics and rubbers. Determination of linear dimensions
BS EN ISO 19232-1:2013. Non-destructive testing. Image quality of radiographsDetermination of the image quality value using wire-type image quality indicators
BS EN ISO 19232-2:2013. Non-destructive testing. Image quality of radiographsDetermination of the image quality value using step/hole-type image quality indicators
BS EN ISO 19232-3:2013. Non-destructive testing. Image quality of radiographsImage quality classes
BS EN ISO 19232-4:2013. Non-destructive testing. Image quality of radiographsExperimental evaluation of image quality values and image quality tables
BS EN ISO 19232-5:2013. Non-destructive testing. Image quality of radiographsDetermination of the image unsharpness value using duplex wire-type image quality indicators
BS EN ISO 1924-2:1995. Paper and board. Determination of tensile propertiesConstant rate of elongation method
BS EN ISO 1924-2:2008. Paper and board. Determination of tensile propertiesConstant rate of elongation method (20 mm/min)
BS EN ISO 19250:2013. Water quality. Detection of Salmonella spp.
BS EN ISO 19258:2011. Soil quality. Guidance on the determination of background values
BS EN ISO 1927-1:2012. Monolithic (unshaped) refractory productsIntroduction and classification
BS EN ISO 1927-2:2012. Monolithic (unshaped) refractory productsSampling for testing
BS EN ISO 1927-3:2012. Monolithic (unshaped) refractory productsCharacterization as received
BS EN ISO 1927-4:2012. Monolithic (unshaped) refractory productsDetermination of consistency of castables
BS EN ISO 1927-5:2012. Monolithic (unshaped) refractory productsPreparation and treatment of test pieces
BS EN ISO 1927-6:2012. Monolithic (unshaped) refractory productsMeasurement of physical properties
BS EN ISO 1927-7:2012. Monolithic (unshaped) refractory productsTests on pre-formed shapes
BS EN ISO 1927-8:2012. Monolithic (unshaped) refractory productsDetermination of complementary properties
BS EN ISO 19334:2011. Binders for paints and varnishes. Gum rosin. Gas-chromatographic analysis
BS EN ISO 1942:2009. Dentistry. Vocabulary
BS EN ISO 1942:2010. Dentistry. Vocabulary
BS EN ISO 1942-5:1995. Dental vocabularyTerms associated with testing
BS EN ISO 19432:2006. Building construction machinery and equipment. Portable, hand-held, internal combustion engine driven cut-off machines. Safety requirements and testing
BS EN ISO 19432:2008. Building construction machinery and equipment. Portable, hand-held internal combustion engine driven cut-off machines. Safety requirements and testing
BS EN ISO 19432:2012. Building construction machinery and equipment. Portable, hand-held, internal combustion engine driven cut-off machines. Safety requirements
BS EN ISO 19439:2006. Enterprise integration. Framework for enterprise modelling
BS EN ISO 19440:2007. Enterprise integration. Constructs for enterprise modelling
BS EN ISO 19458:2006. Water quality. Sampling for microbiological analysis
BS EN ISO 19493:2007. Water quality. Guidance on marine biological surveys of hard-substrate communities
BS EN ISO 196:1995. Wrought copper and copper alloys. Detection of residual stress. Mercury(I) nitrate test
BS EN ISO 1968:2004. Fibre ropes and cordage. Vocabulary
BS EN ISO 1969:2004. Fibre ropes. Polyethylene. 3- and 4-strand ropes
BS EN ISO 19712-1:2013. Plastics. Decorative solid surfacing materialsClassification and specifications
BS EN ISO 19712-2:2013. Plastics. Decorative solid surfacing materialsDetermination of properties. Sheet goods
BS EN ISO 19712-3:2013. Plastics. Decorative solid surfacing materialsDetermination of properties. Solid surface shapes
BS EN ISO 1973:1996. Textile fibres. Determination of linear density. Gravimetric method and vibroscope method
BS EN ISO 19739:2005. Natural gas. Determination of sulfur compounds using gas chromatography
BS EN ISO 1974:2012. Paper. Determination of tearing resistance. Elmendorf method
BS EN ISO 19879:2005. Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections
BS EN ISO 19879:2010. Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections
BS EN ISO 1989:1996. Programming languages. COBOL
BS EN ISO 19900:2002. Petroleum and natural gas industries. General requiremenents for offshore structures
BS EN ISO 19901-1:2005. Petroleum and natural gas industries. Specific requirements for offshore structuresMetocean design and operating considerations
BS EN ISO 19901-2:2004. Petroleum and natural gas industries. Specific requirements for offshore structuresSeismic design procedures and criteria
BS EN ISO 19901-3:2010. Petroleum and natural gas industries. Specific requirements for offshore structures Topsides structure
BS EN ISO 19901-4:2003. Petroleum and natural gas industries. Specific requirements for offshore structuresGeotechnical and foundation design considerations
BS EN ISO 19901-5:2003. Petroleum and natural gas industries. Specific requirements for offshore structuresWeight control during engineering and construction
BS EN ISO 19901-6:2009. Petroleum and natural gas industries. Specific requirements for offshore structuresMarine operations
BS EN ISO 19901-7:2005. Petroleum and natural gas industries. Specific requirements for offshore structuresStationkeeping systems for floating offshore structures and mobile offshore units
BS EN ISO 19901-7:2013. Petroleum and natural gas industries. Specific requirements for offshore structuresStationkeeping systems for floating offshore structures and mobile offshore units
BS EN ISO 19902:2007+A1:2013. Petroleum and natural gas industries. Fixed steel offshore structures
BS EN ISO 19903:2006. Petroleum and natural gas industries. Fixed concrete offshore structures
BS EN ISO 19904-1:2006. Petroleum and natural gas industries. Floating offshore structuresMonohulls, semi-submersibles and spars
BS EN ISO 19905-1:2012. Petroleum and natural gas industries. Site-specific assessment of mobile offshore unitsJack-ups
BS EN ISO 19906:2010. Petroleum and natural gas industries. Arctic offshore structures
BS EN ISO 19932-1:2013. Equipment for crop protection. Knapsack sprayersSafety and environmental requirements
BS EN ISO 19932-2:2013. Equipment for crop protection. Knapsack sprayersTest methods
BS EN ISO 19952:2006. Footwear. Vocabulary
BS EN ISO 19953:2004. Footwear. Test methods for heels. Resistance to lateral impact
BS EN ISO 19954:2003. Footwear. Test methods for whole shoe. Washability in a domestic washing machine
BS EN ISO 19956:2004. Footwear. Test methods for heels. Fatigue resistance
BS EN ISO 19957:2004. Footwear. Test methods for heels. Heel pin holding strength
BS EN ISO 19958:2004. Footwear. Test methods for heels and top pieces. Top piece retention strength
BS EN ISO 19980:2005. Ophthalmic instruments. Corneal topograpers
BS EN ISO 19980:2012. Ophthalmic instruments. Corneal topographers
BS EN ISO 20072:2010. Aerosol drug delivery device design verification. Requirements and test methods
BS EN ISO 20072:2013. Aerosol drug delivery device design verification. Requirements and test methods
BS EN ISO 20079:2006, BS 6068-5.39:2005. Water quality. Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor). Duckweed growth inhibition test
BS EN ISO 2009:1995. Slotted countersunk flat head screws (common head style). Product grade A
BS EN ISO 2009:2011. Slotted countersunk flat head screws. Product grade A
BS EN ISO 2010:1995. Countersunk slotted raised head screws (common head style). Product grade A
BS EN ISO 2010:2011. Slotted raised countersunk head screws. Product grade A
BS EN ISO 20126:2005. Dentistry. Manual toothbrushes. General requirements and test methods
BS EN ISO 20126:2012. Dentistry. Manual toothbrushes. General requirements and test methods
BS EN ISO 20127:2005. Dentistry. Powered toothbrushes. General requirements and test methods
BS EN ISO 20182:2008. Refractory testpiece preparation. Gunning refractory panels by the pneumatic-nozzle mixing type guns
BS EN ISO 20200:2005. Plastics. Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
BS EN ISO 20312:2011. Petroleum and natural gas industries. Design and operating limits of drill strings with aluminium alloy components
BS EN ISO 20344:2004. Personal protective equipment. Test methods for footwear
BS EN ISO 20344:2011. Personal protective equipment. Test methods for footwear
BS EN ISO 20345:2004. Personal protective equipment. Safety footwear
BS EN ISO 20345:2011. Personal protective equipment. Safety footwear
BS EN ISO 20346:2004. Personal protective equipment. Protective footwear
BS EN ISO 20347:2004. Personal protective equipment. Occupational footwear
BS EN ISO 20347:2012. Personal protective equipment. Occupational footwear
BS EN ISO 20349:2010. Personal protective equipment. Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding. Requirements and test method
BS EN ISO 20361:2009. Liquid pumps and pump units. Noise test code. Grades 2 and 3 of accuracy
BS EN ISO 2039-1:1997, BS 2782-3:Method 365D:1997. Plastics. Determination of hardnessBall indentation method
BS EN ISO 2039-1:2003. Plastics. Determination of hardnessBall indentation method
BS EN ISO 2039-2:2000. Determination of Rockwell hardness. Rockwell hardnessRockwell hardness
BS EN ISO 204:2009. Metallic materials. Uniaxial creep testing in tension. Method of test
BS EN ISO 20433:2012. Leather. Tests for colour fastness. Colour fastness to crocking
BS EN ISO 20471:2013. High visibility clothing. Test methods and requirements
BS EN ISO 20482:2003. Metallic materials. Sheet and strip. Erichsen cupping test
BS EN ISO 20483:2006. Cereals and pulses. Determination of the nitrogen content and calculation of the crude protein content. Kjeldahl method
BS EN ISO 20541:2008. Milk and milk products. Determination of nitrate content. Method by enzymatic reduction and molecular- absorption spectrometry after Griess reaction
BS EN ISO 20565-1:2008. Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method)Apparatus, reagents, dissolution and determination of gravimetric silica
BS EN ISO 20565-2:2008. Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method)Wet chemical analysis
BS EN ISO 20565-3:2008. Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method)Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
BS EN ISO 20566:2006. Paints and varnishes. Determination of the scratch resistance of a coating system using a laboratory car-wash
BS EN ISO 20566:2013. Paints and varnishes. Determination of the scratch resistance of a coating system using a laboratory-scale car-wash
BS EN ISO 20567-1:2006. Paints and varnishes. Determination of stone-chip resistance of coatingsMulti-impact testing
BS EN ISO 20567-2:2006. Paints and varnishes. Determination of stone-chip resistance of coatingsSingle-impact test with a guided impact body
BS EN ISO 20567-3:2012. Paints and varnishes. Determination of stone-chip resistance of coatingsSingle-impact test with a free-flying impact body
BS EN ISO 2060:1995. Textiles. Yarn from packages. Determination of linear density (mass per unit length) by the skein method
BS EN ISO 2061:1996. Textiles. Determination of twist in yarns. Direct counting method
BS EN ISO 2061:2010. Textiles. Determination of twist in yarns. Direct counting method
BS EN ISO 2062:1995. Textiles. Yarns from packages. Determination of single-end breaking force and elongation at break
BS EN ISO 2062:2009. Textiles. Yarns from packages. Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
BS EN ISO 20623:2003. Petroleum and related products. Determination of the extreme-pressure and anti-wear properties of fluids. Four ball method (European conditions)
BS EN ISO 2063:2005. Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys
BS EN ISO 2064:1995. Metallic and other non-organic coatings. Definitions and conventions concerning the measurement of thickness
BS EN ISO 2064:2000. Metallic and other inorganic coatings. Definitions and conventions concerning the measurement of thickness
BS EN ISO 20643:2005. Mechanical vibration. Hand-held and hand-guided machinery. Principles for evaluation of vibration emission
BS EN ISO 20643:2008+A1:2012. Mechanical vibration. Hand-held and hand-guided machinery. Principles for evaluation of vibration emission
BS EN ISO 20645:2004. Textile fabrics. Determination of antibacterial activity. Agar diffusion plate test
BS EN ISO 20685:2005. 3-D scanning methodologies for internationally compatible anthropomteric databases
BS EN ISO 20685:2010. 3-D scanning methodologies for internationally compatible anthropometric databases
BS EN ISO 20743:2007. Textiles. Determination of antibacterial activity of antibacterial finished products
BS EN ISO 20743:2013. Textiles. Determination of antibacterial activity of textile products
BS EN ISO 20763:2004. Petroleum and related products. Determination of anti-wear properties of hydraulic fluids. Vane pump method
BS EN ISO 20764:2003, BS 2000-512:2005. Methods of test for petroleum and its productsPetroleum and related products. Preparation of a test portion of high-boiling liquids for the determination of water content. Nitrogen purge method
BS EN ISO 20776-1:2006. Clinical laboratory testing and in vitro diagnostic test systems. Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devicesReference method for testing the in vitro activity of antimicrobial agents against rapidly growing aerobic bacteria involved in infectious diseases
BS EN ISO 20776-2:2007. Clinical laboratory testing and in vitro diagnostic test systems. Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devicesEvaluation of performance of antimicrobial susceptibility test devices
BS EN ISO 2078:1995, BS 946-2:1995. Textile glass. Yarns. Designation
BS EN ISO 20783-1:2003. Petroleum and related products. Determination of emulsion stability of fire-resistant fluidsFluids in category HFAE
BS EN ISO 20783-1:2011. Petroleum and related products. Determination of emulsion stability of fire-resistant fluidsFluids in category HFAE
BS EN ISO 20783-2:2003. Petroleum and related products. Determination of emulsion stability of fire-resistant fluidsFluids in category HFB
BS EN ISO 20795-1:2008. Dentistry. Base polymersDenture base polymers
BS EN ISO 20795-1:2013. Dentistry. Base polymersDenture base polymers
BS EN ISO 20795-2:2010. Dentistry. Base polymersOrthodontic base polymers
BS EN ISO 20795-2:2013. Dentistry. Base polymersOrthodontic base polymers
BS EN ISO 2080:2009. Metallic and other inorganic coatings. Surface treatment, metallic and other inorganic coatings. Vocabulary
BS EN ISO 2081:2008. Metallic and other inorganic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel
BS EN ISO 20815:2008. Petroleum, petrochemical and natural gas industries. Production assurance and reliability management
BS EN ISO 20815:2010. Petroleum, petrochemical and natural gas industries. Production assurance and reliability management
BS EN ISO 2082:2008. Metallic coatings. Electroplated coatings of cadmium with supplementary treatments on iron or steel
BS EN ISO 20823:2003. Petroleum and related products. Determination of the flammability characteristics of fluids in contact with hot surfaces. Manifold ignition test
BS EN ISO 20837:2006. Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. Requirements for sample preparation for qualitative detection
BS EN ISO 20838:2006. Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. Requirements for amplification and detection for qualitative methods
BS EN ISO 20843:2003. Petroleum and related products. Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC
BS EN ISO 20843:2011. Petroleum and related products. Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC
BS EN ISO 20844:2004. Petroleum and related products. Determination of the shear stability of polymer-containing oils using a diesel injector nozzle
BS EN ISO 20846:2004, BS 2000-490:2004. Methods of test for petroleum and its products. BS 2000-490: Petroleum products. Determination of sulfur content of liquid petroleum products. Ultraviolet fluorescence method
BS EN ISO 20846:2011, BS 2000-490-2011. Petroleum products. Determination of sulfur content of automotive fuels. Ultraviolet fluorescence method
BS EN ISO 20847:2004, BS 2000-496:2004. Methods of test for petroleum and its products. BS 2000-496. Petroleum products. Determination of the sulfur content of automotive fuels. Energy-dispersive X-ray fluorescence spectrometry
BS EN ISO 20848-1:2008. Packaging. Plastics drumsRemovable head (open head) drums with a nominal capacity of 113,6 l to 220 l
BS EN ISO 20848-2:2008. Packaging. Plastics drumsNon-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l
BS EN ISO 20848-3:2008. Packaging. Plastics drumsPlug/bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l
BS EN ISO 2085:2010. Anodizing of aluminium and its alloys. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
BS EN ISO 20857:2013. Sterilization of health care products. Dry heat. Requirements for the development, validation and routine control of a sterilization process for medical devices
BS EN ISO 20863:2004. Footwear. Test method for stiffeners and toepuffs. Bondability
BS EN ISO 20864:2004. Footwear. Test method for stiffeners and toepuffs. Mechanical characteristics
BS EN ISO 20869:2010. Footwear. Test methods for outsoles, insoles, lining and insocks. Water soluble content
BS EN ISO 20877:2011. Footwear. Test methods for whole shoe. Thermal insulation
BS EN ISO 20884:2004, BS 2000-497:2004. Methods of test for petroleum and its products. BS 2000-497. Determination of sulfur content of automotive fuels. Wavelength- dispersive X-ray fluorescence spectrometry
BS EN ISO 20884:2011, BS 2000-497:2011. Petroleum products. Determination of sulfur content of automotive fuels. Wavelength-dispersive X-ray fluorescence spectrometry
BS EN ISO 20957-1:2013. Stationary training equipmentGeneral safety requirements and test methods
BS EN ISO 20963:2011. Soil quality. Effects of pollutants on insect larvae (Oxythyrea funesta). Determination of acute toxicity
BS EN ISO 20988:2007. Air quality. Guidelines for estimating measurement uncertainty
BS EN ISO 21003-1:2008. Multilayer piping systems for hot and cold water installations inside buildingsGeneral
BS EN ISO 21003-2:2008+A1:2011. Multilayer piping systems for hot and cold water installations inside buildingsPipes
BS EN ISO 21003-3:2008. Multilayer piping systems for hot and cold water installations inside buildingsFittings
BS EN ISO 21003-5:2008. Multilayer piping systems for hot and cold water installations inside buildingsFitness for purpose of the system
BS EN ISO 21007-1:2005. Gas cylinders. Identification and marking using radio frequency identification technologyReference architecture and terminology
BS EN ISO 21007-2:2005. Gas cylinders. Identification and marking using radio frequency identification technologyNumbering schemes for radio frequency identification
BS EN ISO 21007-2:2013. Gas cylinders. Identification and marking using radio frequency identification technologyNumbering schemes for radio frequency identification
BS EN ISO 21049:2004. Pumps. Shaft sealing systems for centrifugal and rotary pumps
BS EN ISO 2106:2011. Anodizing of aluminium and its alloys. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method
BS EN ISO 21068-1:2008. Chemical analysis of silicon-carbide-containing raw materials and refractory productsGeneral information and sample preparation
BS EN ISO 21068-2:2008. Chemical analysis of silicon-carbide-containing raw materials and refractory productsDetermination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon
BS EN ISO 21068-3:2008. Chemical analysis of silicon-carbide-containing raw materials and refractory productsDetermination of nitrogen, oxygen and metallic and oxidic constituents
BS EN ISO 21078-1:2008. Determination of boron (III) oxide in refractory productsDetermination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes
BS EN ISO 21078-2:2007. Determination of boron (III) oxide in refractory productsAcid extraction method for the determination of boron (III) oxide in binder components
BS EN ISO 21079-1:2008. Chemical analysis of refractories containing alumina, zirconia and silica. Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method)Apparatus, reagents and dissolution
BS EN ISO 21079-2:2008. Chemical analysis of refractories containing alumina, zirconia, and silica. Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method)Wet chemical analysis
BS EN ISO 21079-3:2008. Chemical analysis of refractories containing alumina, zirconia, and silica. Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method)Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma emission spectrometry (ICP-AES)
BS EN ISO 21090:2011. Health Informatics. Harmonized data types for information interchange
BS EN ISO 21091:2013. Health informatics. Directory services for healthcare providers, subjects of care and other entities
BS EN ISO 2114:1997, BS 2782-4:Method 432B:1997. Plastics. Unsaturated polyester resins. Determination of partial acid value and total acid value
BS EN ISO 2114:2000, BS 2782-4:Method 432B:2000. Plastics (polyester resins) and paints and varnishes (binders). Determination of partial acid value and total acid value
BS EN ISO 21148:2009. Cosmetics. Microbiology. General instructions for microbiological examination
BS EN ISO 21149:2009. Cosmetics. Microbiology. Enumeration and detection of aerobic mesophilic bacteria
BS EN ISO 21150:2009. Cosmetics. Microbiology. Detection of Escherichia coli
BS EN ISO 21171:2006. Medical gloves. Determination of removable surface powder
BS EN ISO 21178:2006. Light conveyor belts. Determination of electrical resistances
BS EN ISO 21178:2013. Light conveyor belts. Determination of electrical resistances
BS EN ISO 21179:2006. Light conveyor belts. Determination of the electrostatic field generated by a running light conveyor belt
BS EN ISO 21179:2013. Light conveyor belts. Determination of the electrostatic field generated by a running light conveyor belt
BS EN ISO 21180:2006. Light conveyor belts. Determination of the maximum tensile strength
BS EN ISO 21180:2013. Light conveyor belts. Determination of the maximum tensile strength
BS EN ISO 21181:2006. Light conveyor belts. Determination of the relaxed elastic modulus
BS EN ISO 21181:2013. Light conveyor belts. Determination of the relaxed elastic modulus
BS EN ISO 21182:2006. Light conveyor belts. Determination of the coefficient of friction
BS EN ISO 21182:2013. Light conveyor belts. Determination of the coefficient of friction
BS EN ISO 21183-1:2006. Light conveyor beltsPrincipal characteristics and applications
BS EN ISO 21183-2:2006. Light conveyor beltsList of equivalent terms
BS EN ISO 21187:2005. Milk. Quantitative determination of bacteriological quality. Guidance for establishing and verifying conversion relationship between routine method results and anchor method results
BS EN ISO 21227-1:2003. Paints and varnishes. Evaluation of defects on coated surfaces using optical imagingGeneral guidance
BS EN ISO 21227-2:2006. Paints and varnishes. Evaluation of defects on coated surfaces using optical imagingEvaluation procedure for multi-impact stone-chipping test
BS EN ISO 21227-3:2007. Paints and varnishes. Evaluation of defects on coated surfaces using optical imagingEvaluation of delamination and corrosion around a scribe
BS EN ISO 21227-4:2008. Paints and varnishes. Evaluation of defects on coated surfaces using optical imagingEvaluation of filiform corrosion
BS EN ISO 21254-1:2011. Lasers and laser-related equipment. Test methods for laser-induced damage thresholdDefinitions and general principles
BS EN ISO 21254-2:2011. Lasers and laser-related equipment. Test methods for laser-induced damage thresholdThreshold determination
BS EN ISO 21254-3:2011. Lasers and laser-related equipment. Test methods for laser-induced damage thresholdAssurance of laser power (energy) handling capabilities
BS EN ISO 21258:2010. Stationary source emissions. Determination of the mass concentration of dinitrogen monoxide (N2O). Reference method. Non-dispersive infrared method
BS EN ISO 21269:2004. Hexagon socket head cap screws with metric fine pitch thread
BS EN ISO 2128:2010. Anodizing of aluminium and its alloys. Determination of thickness of anodic oxidation coatings. Non-destructive measurement by split-beam microscope
BS EN ISO 21281:2005. Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks. Rules for the construction and layout of pedals
BS EN ISO 21329:2004. Petroleum and natural gas industries. Pipeline transportation systems. Test procedures for mechanical connectors
BS EN ISO 21351:2005. Space systems. Functional and technical specifications
BS EN ISO 21415-1:2007. Wheat and wheat flour. Gluten contentDetermination of wet gluten by a manual method
BS EN ISO 21415-2:2008. Wheat and wheat flour. Gluten contentDetermination of wet gluten by mechanical means
BS EN ISO 21415-3:2007. Wheat and wheat flour. Gluten contentDetermination of dry gluten from wet gluten by an oven drying method
BS EN ISO 21415-4:2007. Wheat and wheat flour. Gluten contentDetermination of dry gluten from wet gluten by a rapid drying method
BS EN ISO 21427-2:2009, BS 6068-5.45:2006. Water quality. Evaluation of genotoxicity by measurement of the induction of micronucleiMixed population method using the cell line V79
BS EN ISO 2143:2010. Anodizing of aluminium and its alloys. Estimation of loss of absorptive power of anodic oxidation coatings after sealing. Dye-spot test with prior acid treatment CD-ROM
BS EN ISO 21457:2010. Petroleum, petrochemical and natural gas industries. Materials selection and corrosion control for oil and gas production systems
BS EN ISO 21469:2006. Safety of machinery. Lubricants with incidental product contact. Hygiene requirements
BS EN ISO 21487:2006. Small craft. Permanently installed petrol and diesel fuel tanks
BS EN ISO 21487:2012. Small craft. Permanently installed petrol and diesel fuel tanks
BS EN ISO 2151:2004. Acoustics. Noise test code for compressors and vacuum pumps. Engineering method (Grade 2)
BS EN ISO 2151:2008. Acoustics. Noise test code for compressors and vacuum pumps. Engineering method (Grade 2)
BS EN ISO 21530:2004. Dentistry. Materials used for dental equipment surfaces. Determination of resistance to chemical disinfectants
BS EN ISO 21531:2009. Dentistry. Graphical symbols for dental instruments
BS EN ISO 21533:2003. Dentistry. Reusable cartridge syringes intended for intraligamentary injections
BS EN ISO 21534:2007. Non-active surgical implants. Joint replacement implants. Particular requirements
BS EN ISO 21534:2009. Non-active surgical implants. Joint replacement implants. Particular requirements
BS EN ISO 21535:2007. Non-active surgical implants. Joint replacement implants. Specific requirements for hip-joint replacement implants
BS EN ISO 21535:2009. Non-active surgical implants. Joint replacement implants. Specific requirements for hip-joint replacement implants
BS EN ISO 21536:2007. Non-active surgical implants. Joint replacement implants. Specific requirements for knee-joint replacement implants
BS EN ISO 21536:2009. Non-active surgical implants. Joint replacement implants. Specific requirements for knee-joint replacement implants
BS EN ISO 21549-1:2004. Health informatics. Patient healthcard dataGeneral structure
BS EN ISO 21549-1:2013. Health informatics. Patient healthcard data General structure
BS EN ISO 21549-2:2004. Health informatics. Patient healthcard dataCommon objects
BS EN ISO 21549-3:2004. Health informatics. Patient healthcard dataLimited clinical data
BS EN ISO 21549-4:2006. Health informatics. Patient healthcard dataExtended clinical data
BS EN ISO 21549-5:2008. Health informatics. Patient healthcard dataIdentification data
BS EN ISO 21549-6:2008. Health informatics. Patient healthcard dataAdministrative data
BS EN ISO 21549-7:2007. Health informatics. Patient healthcard dataMedication data
BS EN ISO 21549-8:2010. Health informatics. Patient healthcard dataLinks
BS EN ISO 21563:2013. Dentistry. Hydrocolloid impression materials
BS EN ISO 21567:2004. Microbiology of foods and animal feeding stuffs. Horizontal method for the detection of Shigella spp.
BS EN ISO 21569:2005+A1:2013. Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. Qualitative nucleic acid based methods
BS EN ISO 2157:1995. Dental rotary instruments. Nominal diameters and designation code number
BS EN ISO 21570:2005+A1:2013. Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. Quantitative nucleic acid based methods
BS EN ISO 21571:2005+A1:2013. Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. Nucleic acid extraction
BS EN ISO 21572:2004. Foodstuffs. Methods for the detection of genetically modified organisms and derived products. Protein based methods
BS EN ISO 21572:2013. Foodstuffs. Molecular biomarker analysis. Protein-based methods
BS EN ISO 21587-1:2007. Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method)Apparatus, reagents, dissolution and gravimetric silica
BS EN ISO 21587-2:2007. Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method)Wet chemical analysis
BS EN ISO 21587-3:2007. Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method)Inductively coupled plasma and atomic absorption spectrometry methods
BS EN ISO 216:2001. Writing paper and certain classes of printed matter. Trimmed sizes. A and B series
BS EN ISO 216:2007. Writing paper and certain classes of printed matter. Trimmed sizes. A and B series, and indication of machine direction
BS EN ISO 2160:1995, BS 2000- 154:1995,ISO 2160:1985. Petroleum products. Corrosiveness to copper. Copper strip test
BS EN ISO 2160:1998, BS 2000-154:1999,ISO 2160:1998. Petroleum products. Corrosiveness to copper. Copper strip test
BS EN ISO 21606:2007. Dentistry. Elastomeric auxiliaries for use in orthodontics
BS EN ISO 2162-1:1996, BS 308-1.17:1996. Technical product documentation. SpringsSimplified representation
BS EN ISO 2162-2:1996, BS 308-1.18:1996. Technical product documentation. SpringsPresentation of data for cylindrical helical compression springs
BS EN ISO 2162-3:1996, BS 308-1.19:1996. Technical product documentation. SpringsVocabulary
BS EN ISO 21627-1:2003. Plastics. Epoxy resins. Determination of chlorine contentInorganic chlorine
BS EN ISO 21627-1:2009. Plastics. Epoxy resins. Determination of chlorine contentInorganic chlorine
BS EN ISO 21627-2:2003. Plastics. Epoxy resins. Determination of chlorine contentEasily saponifiable chlorine
BS EN ISO 21627-2:2009. Plastics. Epoxy resins. Determination of chlorine contentEasily saponifiable chlorine
BS EN ISO 21627-3:2003. Plastics. Epoxy resins. Determination of chlorine contentTotal chlorine
BS EN ISO 21627-3:2009. Plastics. Epoxy resins. Determination of chlorine contentTotal chlorine
BS EN ISO 21647:2004. Medical electrical equipment. Particular requirements for the basic safety and essential performance of respiratory gas monitors
BS EN ISO 21647:2009. Medical electrical equipment. Particular requirements for the basic safety and essential performance of respiratory gas monitors
BS EN ISO 21649:2006. Needle-free injectors for medical use. Requirements and test methods
BS EN ISO 21649:2009. Needle-free injectors for medical use. Requirements and test methods
BS EN ISO 21670:2003. Hexagon weld nuts with flange
BS EN ISO 21671:2006+A1:2011. Dentistry. Rotary polishers
BS EN ISO 21672-1:2012. Dentistry. Periodontal probesGeneral requirements
BS EN ISO 21672-2:2012. Dentistry. Periodontal probesDesignation
BS EN ISO 217:2008. Paper. Untrimmed sizes. Designation and tolerances for primary and supplementary ranges, and indication of machine direction
BS EN ISO 217:2013. Paper. Untrimmed sizes. Designation and tolerances for primary and supplementary ranges, and indication of machine direction
BS EN ISO 2171:2010. Cereals, pulses and by-products. Determination of ash yield by incineration
BS EN ISO 2177:1995. Metallic coatings. Measurement of coating thickness. Coulometric method by anodic dissolution
BS EN ISO 2177:2004. Metallic coatings. Measurement of coating thickness. Coulometric method by anodic dissolution
BS EN ISO 2178:1995. Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method
BS EN ISO 21787:2006. Industrial valves. Globe valves of thermoplastics materials
BS EN ISO 21809-1:2011. Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systemsPolyolefin coatings (3-layer PE and 3-layer PP)
BS EN ISO 21809-2:2007. Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systemsFusion-bonded epoxy coatings
BS EN ISO 21809-5:2010. Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systemsExternal concrete coatings
BS EN ISO 21871:2006. Microbiology of food and animal feeding stuffs. Horizontal method for the determination of low numbers of presumptive Bacillus cereus. Most probable number technique and detection method
BS EN ISO 21898:2005. Packaging. Flexible intermediate bulk containers (FIBCs) for non-dangerous goods
BS EN ISO 21952:2007. Welding consumables. Wire electrodes, wires, rods and deposits for gas-shielded arc welding of creep-resisting steel. Classification
BS EN ISO 21952:2012. Welding consumables. Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels. Classification
BS EN ISO 21968:2005. Non-magnetic metallic coatings on metallic and non-metallic basis materials. Measurement of coating thickness. Phase-sensitive eddy-current method
BS EN ISO 21969:2006. High-pressure flexible connections for use with medical gas systems
BS EN ISO 21969:2009. High-pressure flexible connections for use with medical gas systems
BS EN ISO 21987:2009. Ophthalmic optics. Mounted spectacle lenses
BS EN ISO 22000:2005. Food safety management systems. Requirements for any organization in the food chain
BS EN ISO 22005:2007. Traceability in the feed and food chain. General principles and basic requirements for system design and implementation
BS EN ISO 22007-1:2012. Plastics. Determination of thermal conductivity and thermal diffusivityGeneral principles
BS EN ISO 22007-2:2012. Plastics. Determination of thermal conductivity and thermal diffusivityTransient plane heat source (hot disc) method
BS EN ISO 22007-3:2012. Plastics. Determination of thermal conductivity and thermal diffusivityTemperature wave analysis method
BS EN ISO 22007-4:2012. Plastics. Determination of thermal conductivity and thermal diffusivityLaser flash method
BS EN ISO 2203:1997, BS 308-1.16:1997. Technical drawing. Conventional representation of gears
BS EN ISO 22030:2011. Soil quality. Biological methods. Chronic toxicity in higher plants
BS EN ISO 22032:2009, BS 6068-2.99:2006. Water quality. Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge. Method using extraction and gas chromatography/mass spectrometry
BS EN ISO 22088-1:2006. Plastics. Determination of resistance to environmental stress cracking (ESC)General guidance
BS EN ISO 22088-2:2006. Plastics. Determination of resistance to environmental stress cracking (ESC)Constant tensile load method
BS EN ISO 22088-3:2006. Plastics. Determination of resistance to environmental stress cracking (ESC)Bent strip method
BS EN ISO 22088-4:2006. Plastics. Determination of resistance to environmental stress cracking (ESC)Ball or pin impression method
BS EN ISO 22088-5:2009. Plastics. Determination of resistance to environmental stress cracking (ESC)Constant tensile deformation method
BS EN ISO 22088-6:2009. Plastics. Determination of resistance to environmental stress cracking (ESC)Slow strain rate method
BS EN ISO 22112:2006. Dentistry. Artificial teeth for dental prostheses
BS EN ISO 22118:2011. Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) for the detection and quantification of food-borne pathogens. Performance characteristics
BS EN ISO 22119:2011. Microbiology of food and animal feeding stuffs. Real-time polymerase chain reaction (PCR) for the detection of food-borne pathogens. General requirements and definitions
BS EN ISO 22155:2013. Soil quality. Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers. Static headspace method
BS EN ISO 22160:2007. Milk and milk-based drinks. Determination of alkaline phosphatase activity. Enzymatic photo-activated system (EPAS) method
BS EN ISO 22174:2005. Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. General requirements and definitions
BS EN ISO 22254:2005. Manual toothbrushes. Resistance of tufted portion to deflection
BS EN ISO 22282-1:2012. Geotechnical investigation and testing. Geohydraulic testingGeneral rules
BS EN ISO 22282-2:2012. Geotechnical investigation and testing. Geohydraulic testingWater permeability tests in a borehole using open systems
BS EN ISO 22282-3:2012. Geotechnical investigation and testing. Geohydraulic testingWater pressure tests in rock
BS EN ISO 22282-4:2012. Geotechnical investigation and testing. Geohydraulic testingPumping tests
BS EN ISO 22282-5:2012. Geotechnical investigation and testing. Geohydraulic testingInfiltrometer tests
BS EN ISO 22282-6:2012. Geotechnical investigation and testing. Geohydraulic testingWater permeability tests in a borehole using closed systems
BS EN ISO 22288:2009. Leather. Physical and mechanical tests. Determination of flex resistance by the vamp flex method
BS EN ISO 2231:1995, BS 3424-2:1992. Rubber- or plastics-coated fabrics. Standard atmospheres for conditioning and testing
BS EN ISO 2233:1999. Packaging. Complete, filled transport packages. Conditioning for testing
BS EN ISO 2233:2001. Packaging. Complete, filled transport packages and unit loads. Conditioning for testing
BS EN ISO 2234:2002. Packaging. Complete, filled transport packages and unit loads. Stacking tests using a static load
BS EN ISO 22374:2005. Dentistry. Dental handpieces. Electrical-powered scalers and scaler tips
BS EN ISO 22391-1:2009. Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT)General
BS EN ISO 22391-2:2009. Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT)Pipes
BS EN ISO 22391-3:2009. Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT)Fittings
BS EN ISO 22391-5:2009. Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT)Fitness for purpose of the system
BS EN ISO 22413:2011. Transfer sets for pharmaceutical preparations. Requirements and test methods
BS EN ISO 22413:2013. Transfer sets for pharmaceutical preparations. Requirements and test methods
BS EN ISO 22432:2011. Geometrical product specifications (GPS). Features utilized in specification and verification
BS EN ISO 22434:2011. Transportable gas cylinders. Inspection and maintenance of cylinder valves
BS EN ISO 22435:2007+A1:2012. Gas cylinders. Cylinder valves with integrated pressure regulators. Specification and type testing
BS EN ISO 2244:2002. Packaging. Complete, filled transport packages and unit loads. Horizontal impact tests
BS EN ISO 22442-1:2007. Medical devices utilizing animal tissues and their derivativesApplication of risk management
BS EN ISO 22442-2:2007. Medical devices utilizing animal tissues and their derivativesControls on sourcing, collection and handling
BS EN ISO 22442-3:2007. Medical devices utilizing animal tissues and their derivativesValidation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents
BS EN ISO 2247:2002. Packaging. Complete, filled transport packages and unit loads. Vibration tests at fixed low frequency
BS EN ISO 22475-1:2006. Geotechnical investigation and testing. Sampling methods and groundwater measurementsTechnical principles for execution
BS EN ISO 22476-1:2012. Geotechnical investigation and testing. Field testingElectrical cone and piezocone penetration test
BS EN ISO 22476-12:2009. Geotechnical investigation and testing. Field testingMechanical cone penetration test (CPTM)
BS EN ISO 22476-2:2005+A1:2011. Geotechnical investigation and testing. Field testingDynamic probing
BS EN ISO 22476-3:2005+A1:2011. Geotechnical investigation and testing. Field testingStandard penetration test
BS EN ISO 22476-4:2012. Geotechnical investigation and testing. Field testingMénard pressuremeter test
BS EN ISO 22476-5:2012. Geotechnical investigation and testing. Field testingFlexible dilatometer test
BS EN ISO 22476-7:2012. Geotechnical investigation and testing. Field testingBorehole jack test
BS EN ISO 22478:2006. Water quality. Determination of certain explosives and related compounds. Method using high-performance liquid chromatography (HPLC) with UV detection
BS EN ISO 225:2010. Fasteners. Bolts, screws, studs and nuts. Symbols and descriptions of dimensions
BS EN ISO 22523:2006. External limb prostheses and external orthoses. Requirements and test methods
BS EN ISO 22610:2006. Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment. Test method to determine the resistance to wet bacterial penetration
BS EN ISO 22612:2005. Clothing for protection against infectious agents. Test method for resistance to dry microbial penetration
BS EN ISO 22665:2012. Ophthalmic optics and instruments. Instruments to measure axial distances in the eye
BS EN ISO 22674:2006. Dentistry. Metallic materials for fixed and removable restorations and appliances
BS EN ISO 22675:2006. Prosthetics. Testing of ankle-foot devices and foot units. Requirements and test methods
BS EN ISO 22717:2009. Cosmetics. Microbiology. Detection of Pseudomonas aeruginosa
BS EN ISO 22718:2009. Cosmetics. Microbiology. Detection of Staphylococcus aureus
BS EN ISO 22721:2007. Conveyor belts. Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining
BS EN ISO 22774:2004. Footwear. Test methods for accessories. Shoe laces. Abrasion resistance
BS EN ISO 22775:2004. Footwear. Test methods for accessories. Metallic accessories. Corrosion resistance
BS EN ISO 22776:2004. Footwear. Test method for accessories. Touch and close fasteners. Shear strength before and after repeated closing
BS EN ISO 22777:2004. Footwear. Test method for accessories: touch and close fasteners. Peel strenght before and after repeated closingst method for accessories. Touch and close fasteners. Peel strength before and after repeated closing
BS EN ISO 22794:2007. Dentistry. Implantable materials for bone filling and augmentation in oral and maxillofacial surgery. Contents of a technical file
BS EN ISO 22794:2009. Dentistry. Implantable materials for bone filling and augmentation in oral and maxillofacial surgery. Contents of a technical file
BS EN ISO 22803:2005. Dentistry. Membrane materials for guided tissue regeneration in oral and maxillofacial surgery. Contents of a technical file
BS EN ISO 228-1:2003. Pipe threads where pressure-tight joints are not made on the threadsDimensions, tolerances and designation
BS EN ISO 228-2:2003. Pipe threads where pressure-tight joints are not made on the threadsVerification by means of limit gauges
BS EN ISO 22825:2006. Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys
BS EN ISO 22825:2012. Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys
BS EN ISO 22827-1:2005. Acceptance tests for Nd:YAG laser beam welding machines. Machines with optical fibre deliveryLaser assembly
BS EN ISO 22827-2:2005. Acceptance tests for Nd:YAG laser beam welding machines. Machines with optical fibre deliveryMoving mechanism
BS EN ISO 22829:2008. Resistance welding. Transformer-rectifier for welding guns with integrated transformers. Transformer- rectifier units operating at 1000 Hz frequency
BS EN ISO 22854:2008. Liquid petroleum products. Determination of hydrocarbon types and oxygenates in automotive-motor gasoline. Multidimensional gas chromatography method
BS EN ISO 2286-1:1998. Rubber- or plastics-coated fabrics. Determination of roll characteristicsMethods for determination of length, width and net mass
BS EN ISO 2286-2:1998. Rubber- or plastics-coated fabrics. Determination of roll characteristicsMethods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
BS EN ISO 2286-3:1998. Rubber- or plastics-coated fabrics. Determination of roll characteristicsMethod for determination of thickness
BS EN ISO 22867:2006. Forestry machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles
BS EN ISO 22867:2008. Forestry machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles
BS EN ISO 22867:2011. Forestry and gardening machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles
BS EN ISO 22868:2005. Forestry machinery. Noise test code for portable hand-held machines with internal combustion engine. Engineering method (grade 2 accuracy)
BS EN ISO 22868:2006. Forestry machinery. Noise test code for portable hand-held machines with internal combustion engine. Engineering method (grade 2 accuracy)
BS EN ISO 22868:2008. Forestry machinery. Noise test code for portable hand-held machines with internal combustion engine. Engineering method (Grade 2 accuracy)
BS EN ISO 22868:2011. Forestry and garden machinery. Noise test code for portable hand-held machines with internal combustion engine. Engineering method (Grade 2 accuracy)
BS EN ISO 22870:2006. Point-of-care testing (POCT). Requirements for quality and competence
BS EN ISO 22892:2011. Soil quality. Guidelines for the identification of target compounds by gas chromatography and mass spectrometry
BS EN ISO 22959:2009. Animal and vegetable fats and oils. Determination of polycyclic aromatic hydrocarbons by on-line donor-acceptor complex chromatography and HPLC with fluorescence detection
BS EN ISO 2307:2005. Fibre ropes. Determination of certain physical and mechanical properties
BS EN ISO 2307:2010. Fibre ropes. Determination of certain physical and mechanical properties
BS EN ISO 23125:2010+A1:2012. Machine tools. Safety. Turning machines
BS EN ISO 23161:2011. Soil quality. Determination of selected organotin compounds. Gas-chromatographic method
BS EN ISO 2320:1998. Prevailing torque type steel hexagon nuts. Mechanical and performance properties
BS EN ISO 2320:2008. Prevailing torque type steel nuts. Mechanical and performance properties
BS EN ISO 23210:2009. Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at low concentrations by use of impactors
BS EN ISO 23251:2007+A1:2008. Petroleum, petrochemical and natural gas industries. Pressure-relieving and depressuring systems
BS EN ISO 23275-1:2008. Animal and vegetable fats and oils. Cocoa butter equivalents in cocoa butter and plain chocolateDetermination of the presence of cocoa butter equivalents
BS EN ISO 23275-2:2008. Animal and vegetable fats and oils. Cocoa butter equivalents in cocoa butter and plain chocolateQuantification of cocoa butter equivalents
BS EN ISO 23277:2009. Non-destructive testing of welds. Penetrant testing of welds. Acceptance levels
BS EN ISO 23278:2009. Non-destructive testing of welds. Magnetic particle testing of welds. Acceptance levels
BS EN ISO 23279:2010. Non-destructive testing of welds. Ultrasonic testing. Characterization of indications in welds
BS EN ISO 23328-1:2008. Breathing system filters for anaesthetic and respiratory useSalt test method to assess filtration performance
BS EN ISO 23328-2:2008. Breathing system filters for anaesthetic and respiratory useNon-filtration aspects
BS EN ISO 23328-2:2009. Breathing system filters for anaesthetic and respiratory useNon-filtration aspects
BS EN ISO 2338:1998. Parallel pins of unhardened steel and austenitic stainless steel
BS EN ISO 2342:2003. Slotted headless screws with shank
BS EN ISO 23429:2004. Gauging of hexagon sockets
BS EN ISO 23470:2011. Soil quality. Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt trichloride solution
BS EN ISO 23553-1:2009. Safety and control devices for oil burners and oil-burning appliances. Particular requirementsShut-off devices for oil burners
BS EN ISO 2360:1995, ISO 2360-1982. Non-conductive coatings on non-magnetic basis metals. Measurement of coating thickness. Eddy current method
BS EN ISO 2360:2003. Non-conductive coatings on non-magnetic electrically conductive basis materials. Measurement of coating thickness. Amplitude-sensitive eddy current method
BS EN ISO 23606:2009. Textiles. Knitted fabrics. Representation and pattern design
BS EN ISO 2361:1995. Electrodeposited nickel coatings on magnetic and non-magnetic substrates. Measurement of coating thickness. Magnetic method
BS EN ISO 23611-1:2011. Soil quality. Sampling of soil invertebratesHand-sorting and formalin extraction of earthworms
BS EN ISO 23611-2:2011. Soil quality. Sampling of soil invertebratesSampling and extraction of micro-arthropods (Collembola and Acarina)
BS EN ISO 23611-3:2011. Soil quality. Sampling of soil invertebratesSampling and soil extraction of enchytraeids
BS EN ISO 23611-4:2011. Soil quality. Sampling of soil invertebratesSampling, extraction and identification of soil-inhabiting nematodes
BS EN ISO 23611-5:2013. Soil quality. Sampling of soil invertebratesSampling and extraction of soil macro-invertebrates
BS EN ISO 23611-6:2013. Soil quality. Sampling of soil invertebratesGuidance for the design of sampling programmes with soil invertebrates
BS EN ISO 23631:2006. Water quality. Determination of dalapon, trichloroacetic acid and selected haloacetic acids. Method using gas chromatography (GC-ECD and/or GCMS detection) after liquid-liquid extraction and derivatization
BS EN ISO 23640:2011. In vitro diagnostic medical devices. Evaluation of stability of in vitro diagnostic reagents
BS EN ISO 23640:2013. In vitro diagnostic medical devices. Evaluation of stability of in vitro diagnostic reagents
BS EN ISO 23667:2007. Packaging. Transport packaging for dangerous goods. Rigid plastics and plastics composite IBCs. Compatibility testing
BS EN ISO 23747:2007. Anaesthetic and respiratory equipment. Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
BS EN ISO 23747:2009. Anaesthetic and respiratory equipment. Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
BS EN ISO 23753-1:2011. Soil quality. Determination of dehydrogenase activity in soilMethod using triphenyltetrazolium chloride (TTC)
BS EN ISO 23753-2:2011. Soil quality. Determination of dehydrogenase activity in soilsMethod using iodotetrazolium chloride (INT)
BS EN ISO 2376:2010. Anodizing of aluminium and its alloys. Determination of electric breakdown potential
BS EN ISO 23811:2009. Paints and varnishes. Determination of percentage volume of non-volatile matter by measuring the nonvolatile matter content and the density of the coating material, and calculation of the theoretical spreading rate
BS EN ISO 23907:2012. Sharps injury protection. Requirements and test methods. Sharps containers
BS EN ISO 23908:2011. Sharps injury protection. Requirements and test methods. Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling
BS EN ISO 23908:2013. Sharps injury protection. Requirements and test methods. Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling
BS EN ISO 23910:2007. Leather. Physical and mechanical tests. Measurement of stitch tear resistance
BS EN ISO 23913:2009. Water quality. Determination of Chromium(VI). Method using flow analysis (FIA and CFA) and spectrometric detection
BS EN ISO 23936-1:2009. Petroleum, petrochemical and natural gas industries. Non-metallic materials in contact with media related to oil and gas productionThermoplastics
BS EN ISO 23936-2:2011. Petroleum, petrochemical and natural gas industries. Nonmetallic materials in contact with media related to oil and gas productionElastomers
BS EN ISO 23953-1:2005+A1:2012. Refrigerated display cabinetsVocabulary
BS EN ISO 23953-2:2005+A1:2012. Refrigerated display cabinetsClassification, requirements and test conditions
BS EN ISO 2398:1997. Rubber hose, textile-reinforced, for compressed air. Specification
BS EN ISO 2398:2008. Rubber hoses, textile-reinforced for compressed air. Specification
BS EN ISO 23993:2008. Thermal insulation products for building equipment and Industrial installations. Determination of design thermal conductivity
BS EN ISO 23993:2010. Thermal insulation products for building equipment and industrial installations. Determination of design thermal conductivity
BS EN ISO 23996:2012. Resilient floor coverings. Determination of density
BS EN ISO 23997:2012. Resilient floor coverings. Determination of mass per unit area
BS EN ISO 23999:2012. Resilient floor coverings. Determination of dimensional stability and curling after exposure to heat
BS EN ISO 2400:2012. Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 1
BS EN ISO 24011:2012. Resilient floor coverings. Specification for plain and decorative linoleum
BS EN ISO 24013:2006. Optics and photonics. Lasers and laser-related equipment. Measurement of phase retardation of optical components for polarized laser radiation
BS EN ISO 24014-1:2007. Public transport. Interoperable fare management systemArchitecture
BS EN ISO 24034:2005+A1:2008. Welding consumables. Solid wires and rods for fusion welding of titanium and titanium alloys. Classification
BS EN ISO 24034:2010. Welding consumables. Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys. Classification
BS EN ISO 2409:1995, BS 3900-E6:1992. Paints and varnishes. Cross-cut test
BS EN ISO 2409:2007, BS 3900-E6:2007. Paints and varnishes. Cross-cut test
BS EN ISO 2409:2013. Paints and varnishes. Cross-cut test
BS EN ISO 2411:2000. Rubber or plastics-coated fabrics. Determination of coating adhesion
BS EN ISO 24157:2008. Ophthalmic optics and instruments. Reporting of aberrations of the human eye
BS EN ISO 2417:2002. Leather. Physical and mechanical tests. Determination of the static absorption of water
BS EN ISO 2418:2002. Leather. Chemical, physical and mechanical and fastness tests. Sampling location
BS EN ISO 2419:2002. Leather. Physical and mechanical tests. Sample preparation and conditioning
BS EN ISO 2419:2006. Leather. Physical and mechanical tests. Sample preparation and conditioning
BS EN ISO 2419:2012. Leather. Physical and mechanical tests. Sample preparation and conditioning
BS EN ISO 2420:2002. Leather. Physical and mechanical tests. Determination of apparent density
BS EN ISO 24234:2004+A1:2011. Dentistry. Mercury and alloys for dental amalgam
BS EN ISO 24276:2006+A1:2013. Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. General requirements and definitions
BS EN ISO 2431:1996, BS 3900-A6:1996. Paints and varnishes. Determination of flow time by use of flow cups
BS EN ISO 2431:2011. Paints and varnishes. Determination of flow time by use of flow cups
BS EN ISO 24333:2009. Cereals and cereal products. Sampling
BS EN ISO 24340:2012. Resilient floor Coverings. Determination of thickness of layers
BS EN ISO 24341:2012. Resilient and textile floor coverings. Determination of length, width and straightness of sheet
BS EN ISO 24342:2012+A1:2012. Resilient and textile floor-coverings. Determination of side length, edge, straightness and squareness of tiles
BS EN ISO 24343-1:2012. Resilient and laminate floor coverings. Determination of indentation and residual indentationResidual indentation
BS EN ISO 24344:2012. Resilient floor coverings. Determination of flexibility and deflection
BS EN ISO 24345:2012. Resilient floor coverings. Determination of peel resistance
BS EN ISO 24346:2012. Resilient floor coverings. Determination of overall thickness
BS EN ISO 24373:2009. Welding consumables. Solid wires and rods for fusion welding of copper and copper alloys. Classification
BS EN ISO 2439:2001. Flexible cellular polymeric materials. Determination of hardness (indentation technique)
BS EN ISO 2439:2008. Flexible cellular polymeric materials. Determination of hardness (indentation technique)
BS EN ISO 2440:1999+A1:2010. Flexible and rigid cellular polymeric materials. Accelerated aging tests
BS EN ISO 24415-1:2009. Tips for assistive products for walking. Requirements and test methodsFriction of tips
BS EN ISO 24442:2011. Cosmetics. Sun protection test methods. In vivo determination of sunscreen UVA protection
BS EN ISO 24443:2012. Determination of sunscreen UVA photoprotection in vitro
BS EN ISO 24444:2010. Cosmetics. Sun protection test methods. In vivo determination of the sun protection factor (SPF)
BS EN ISO 24450:2005. Laboratory glassware. Wide-necked boiling flasks
BS EN ISO 2450:1999. Cream. Determination of fat content (Reference method)
BS EN ISO 2450:2008. Cream. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 24500:2010. Ergonomics. Accessible design. Auditory signals for consumer products
BS EN ISO 24501:2010. Ergonomics. Accessible design. Sound pressure levels of auditory signals for consumer products
BS EN ISO 24502:2010. Ergonomics. Accessible design. Specification of age-related luminance contrast for coloured light
BS EN ISO 24503:2011. Ergonomics. Accessible design. Tactile dots and bars on consumer products
BS EN ISO 24534-1:2010. Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehiclesArchitecture
BS EN ISO 24534-2:2010. Automatic vehicle and equipment identification. Electronic Registration Identification (ERI) for vehiclesOperational requirements
BS EN ISO 24534-3:2010. Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehiclesVehicle data
BS EN ISO 24534-4:2010. Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehiclesSecure communications using asymmetrical techniques
BS EN ISO 24598:2007. Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels. Classification
BS EN ISO 24598:2012. Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels. Classification
BS EN ISO 2495:2001, BS 283:1995. Specification for iron blue pigments
BS EN ISO 24978:2009. Intelligent transport systems. ITS Safety and emergency messages using any available wireless media. Data registry procedures
BS EN ISO 24998:2008. Plastics laboratory ware. Single-use Petri dishes for microbiological procedures
BS EN ISO 2503:1998. Gas welding equipment. Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar
BS EN ISO 2503:2009. Gas welding equipment. Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
BS EN ISO 2505:2005. Thermoplastics pipes. Longitudinal reversion. Test methods and parameters
BS EN ISO 25139:2011. Stationary source emissions. Manual method for the determination of the methane concentration using gas chromatography
BS EN ISO 25140:2010. Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
BS EN ISO 25177:2011. Soil quality. Field soil description
BS EN ISO 25178-2:2012. Geometrical product specifications (GPS). Surface texture. ArealTerms, definitions and surface texture parameters
BS EN ISO 25178-3:2012. Geometrical product specifications (GPS). Surface texture: ArealSpecification operators
BS EN ISO 25178-6:2010. Geometrical product specifications (GPS). Surface texture. ArealClassification of methods for measuring surface texture
BS EN ISO 25178-601:2010. Geometrical product specifications (GPS). Surface texture. ArealNominal characteristics of contact (stylus) instruments
BS EN ISO 25178-602:2010. Geometrical product specifications (GPS). Surface texture. ArealNominal characteristics of non-contact (confocal chromatic probe) instruments
BS EN ISO 25178-604:2013. Geometrical product specifications (GPS). Surface texture: ArealNominal characteristics of non-contact (coherence scanning interferometry) instruments
BS EN ISO 25178-701:2010. Geometrical product specifications (GPS). Surface texture. ArealCalibration and measurement standards for contact (stylus) instruments
BS EN ISO 25178-71:2012. Geometrical product specifications (GPS). Surface texture: ArealSoftware measurement standards
BS EN ISO 25197:2012. Small craft. Electrical/electronic control systems for steering, shift and throttle
BS EN ISO 252:2007. Conveyor belts. Adhesion between constitutive elements. Test methods
BS EN ISO 252-1:1999. Textile conveyor belts. Adhesive strength between constitutive elementsMethods of test
BS EN ISO 25239-1:2011. Friction stir welding. AluminiumVocabulary
BS EN ISO 25239-2:2011. Friction stir welding. AluminiumDesign of weld joints
BS EN ISO 25239-3:2011. Friction stir welding. AluminiumQualification of welding operators
BS EN ISO 25239-4:2011. Friction stir welding. AluminiumSpecification and qualification of welding procedures
BS EN ISO 25239-5:2011. Friction stir welding. AluminiumQuality and inspection requirements
BS EN ISO 2535:1998. Plastics. Unsaturated polyester resins. Measurement of gel time at 25°C
BS EN ISO 2535:2002. Plastics. Unsaturated polyester resins. Measurement of gel time at ambient temperature
BS EN ISO 25378:2011. Geometrical product specifications (GPS). Characteristics and conditions. Definitions
BS EN ISO 2538:2003. Geometrical product specifications (GPS). Series of angles and slopes on prisms
BS EN ISO 25424:2011. Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices
BS EN ISO 25457:2008. Petroleum, petrochemical and natural gas industries. Flare details for general refinery and petrochemical service
BS EN ISO 25539-1:2009. Cardiovascular Implants. Endovascular devicesEndovascular prostheses
BS EN ISO 25539-2:2008. Cardiovascular implants. Endovascular devicesVascular stents
BS EN ISO 25539-2:2009. Cardiovascular implants. Endovascular devicesVascular stents
BS EN ISO 25539-2:2012. Cardiovascular implants. Endovascular devicesVascular stents
BS EN ISO 25539-3:2011. Cardiovascular implants. Endovascular devicesVena cava filters
BS EN ISO 2554:1999, BS 2782-4:Method 432C:1997. Plastics. Unsaturated polyester resins. Determination of hydroxyl value
BS EN ISO 2555:2000. Plastics. Resins in the liquid state or as emulsions or dispersions. Determination of apparent viscosity by the Brookfield Test method
BS EN ISO 2556:2001. Plastics. Determination of the gas transmission rate of films and thin sheets under atmospheric pressure. Manometric method
BS EN ISO 2560:2005. Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification
BS EN ISO 2560:2009. Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification
BS EN ISO 25619-1:2008. Geosynthetics. Determination of compression behaviourCompressive creep properties
BS EN ISO 25619-2:2008. Geosynthetics. Determination of compression behaviourDetermination of short-term compression behaviour
BS EN ISO 2566-1:1999. Steel. Conversion of elongation valuesCarbon and low alloy steels
BS EN ISO 2566-2:2001. Steel. Conversion of elongation valuesAustenitic steels
BS EN ISO 25745-1:2012. Energy performance of lifts, escalators and moving walksEnergy measurement and verification
BS EN ISO 25762:2012. Plastics. Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
BS EN ISO 2578:1999, BS 2782-1:Method 135:1993. Plastics. Determination of the time-temperature limits after prolonged exposure to heat
BS EN ISO 2580-1:1999. Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 2580-1:2001. Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 2580-1:2002. Plastics. Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 2580-2:2000. Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 2580-2:2003. Plastics. Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 2589:2002. Leather. Physical and mechanical tests. Determination of thickness
BS EN ISO 2592:2001, BS 2000-36:2002. Determination of flash and fire points. Cleveland open cup method
BS EN ISO 26082:2007. Leather. Physical and mechanical tests. Determination of soiling with rubbing for automotive leather
BS EN ISO 26082-1:2012. Leather. Physical and mechanical test methods for the determination of soilingRubbing (Martindale) method
BS EN ISO 26082-2:2012. Leather. Physical and mechanical test methods for the determination of soilingTumbling method
BS EN ISO 26203-1:2010. Metallic materials. Tensile testing at high strain ratesElastic-bar-type systems
BS EN ISO 26203-2:2011. Metallic materials. Tensile testing at high strain ratesServo-hydraulic and other test systems
BS EN ISO 2624:1995. Copper and copper alloys. Estimation of average grain size
BS EN ISO 2626:1995. Copper. Hydrogen embrittlement test
BS EN ISO 26304:2009. Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels. Classification
BS EN ISO 26304:2011. Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels. Classification
BS EN ISO 2639:2002. Steels. Determination and verification of the depth of carburized and hardened cases
BS EN ISO 266:1997. Acoustics. Preferred frequencies
BS EN ISO 26782:2009. Anaesthetic and respiratory equipment. Spirometers intended for the measurement of time forced expired volumes in humans
BS EN ISO 26800:2011. Ergonomics. General approach, principles and concepts
BS EN ISO 26845:2008. Chemical analysis of refractories. General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
BS EN ISO 26909:2010. Springs. Vocabulary
BS EN ISO 2692:2006. Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
BS EN ISO 26945:2008. Metallic and other inorganic coatings. Electrodeposited coatings of tin-cobalt alloy
BS EN ISO 26945:2011. Metallic and other inorganic coatings. Electrodeposited coatings of tin-cobalt alloy
BS EN ISO 26985:2012. Resilient floor coverings. Identification of linoleum and determination of cement content and ash residue
BS EN ISO 26986:2012. Resilient floor coverings. Expanded (cushioned) poly(vinyl chloride) floor covering. Specification Expanded (cushioned) poly(vinyl chloride) floor covering - Specification (ISO 26986:2010)
BS EN ISO 26987:2012. Resilient floor coverings. Determination of staining and resistance to chemicals
BS EN ISO 2702:1995. Heat-treated steel tapping screws. Mechanical properties
BS EN ISO 2702:2011. Heat-treated steel tapping screws. Mechanical properties
BS EN ISO 27020:2010. Dentistry. Brackets and tubes for use in orthodontics
BS EN ISO 27107:2008. Animal and vegetable fats and oils. Determination of peroxide value. Potentiometric end-point determination
BS EN ISO 27107:2010. Animal and vegetable fats and oils. Determination of peroxide value. Potentiometric end-point determination
BS EN ISO 2719:2002, BS 2000-34:2002. Determination of flash point. Pensky-Martens closed cup method
BS EN ISO 2738:2000. Sintered metal materials, excluding hardmetals. Permeable sintered metal materials. Determination of density, oil content and open porosity
BS EN ISO 2739:1998. Sintered metal bushes. Determination of radial crushing strength
BS EN ISO 2739:2010. Sintered metal bushes. Determination of radial crushing strength
BS EN ISO 2739:2012. Sintered metal bushings. Determination of radial crushing strength
BS EN ISO 2740:2000. Sintered metal materials, excluding hardmetals. Tensile test pieces
BS EN ISO 2740:2007. Sintered metal materials, excluding hardmetals. Tensile test pieces
BS EN ISO 2740:2009. Sintered metal materials, excluding hardmetals. Tensile test pieces
BS EN ISO 27509:2012. Petroleum and natural gas industries. Compact flanged connections with IX seal ring
BS EN ISO 2758:2003. Paper. Determination of bursting strength
BS EN ISO 27587:2009. Leather. Chemical tests. Determination of the free formaldehyde in process auxiliaries
BS EN ISO 2759:2003. Board. Determination of bursting strength
BS EN ISO 276:2010. Binders for paints and varnishes. Linseed stand oil. Requirements and methods of test
BS EN ISO 277:2010. Binders for paints and varnishes. Raw tung oil. Requirements and methods of test
BS EN ISO 27789:2013. Health informatics. Audit trails for electronic health records
BS EN ISO 27799:2008. Health informatics. Information security management in health using ISO/IEC 27002
BS EN ISO 27874:2008. Metallic coatings. Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes. Specification and test methods
BS EN ISO 2789:1995. Information and documentation. International library statistics
BS EN ISO 2789:2003. Information and documentation. International library statistics
BS EN ISO 27953-1:2011. Health informatics. Individual case safety reports (ICSRs) in pharmacovigilanceFramework for adverse event reporting
BS EN ISO 27953-2:2011. Health informatics. Individual case safety reports (ICSRs) in pharmacovigilanceHuman pharmaceutical reporting requirements for ICSR
BS EN ISO 27971:2008. Cereals and cereal products. Common wheat (Triticum aestivum L.). Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology
BS EN ISO 28017:2011. Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications. Specification
BS EN ISO 2806:1997. Industrial automation systems. Numerical control of machines. Vocabulary
BS EN ISO 2808:2001, BS 3900-C5:1997. Paints and varnishes. Determination of film thickness
BS EN ISO 2808:2007, BS 3900-C5:2007. Paints and varnishes. Determination of film thickness
BS EN ISO 2810:2004. Paints and varnishes. Natural weathering of coatings. Exposure and assessment
BS EN ISO 2811-1:2001, BS 3900-A19:1998. Paints and varnishes. Determination of densityPyknometer method
BS EN ISO 2811-1:2011. Paints and varnishes. Determination of densityPyknometer method
BS EN ISO 2811-2:2001, BS 3900-A20:1998. Paints and varnishes. Determination of densityImmersed body (plummet) method
BS EN ISO 2811-2:2011. Paints and varnishes. Determination of densityImmersed body (plummet) method
BS EN ISO 2811-3:2001, BS 3900-A21:1998. Paints and varnishes. Determination of densityOscillation method
BS EN ISO 2811-3:2011. Paints and varnishes. Determination of densityOscillation method
BS EN ISO 2811-4:2001. Paints and varnishes. Determination of densityPressure cup method
BS EN ISO 2811-4:2011. Paints and varnishes. Determination of densityPressure cup method
BS EN ISO 2812-1:1995, BS 3900-G5:1993. Paints and varnishes. Determination of resistance to liquidsGeneral methods
BS EN ISO 2812-1:2007. Paints and varnishes. Determination of resistance to liquidsImmersion in liquids other than water
BS EN ISO 2812-2:1995, BS 3900-G8:1993. Paints and varnishes. Determination of resistance to liquidsWater immersion method
BS EN ISO 2812-2:2007. Paints and varnishes. Determination of resistance to liquidsWater immersion method
BS EN ISO 2812-3:2007. Paints and varnishes. Determination of resistance to liquidsMethod using an absorbent medium
BS EN ISO 2812-3:2012. Paints and varnishes. Determination of resistance to liquidsMethod using an absorbent medium
BS EN ISO 2812-4:2007. Paints and varnishes. Determination of resistance to liquidsSpotting methods
BS EN ISO 2812-5:2007. Paints and varnishes. Determination of resistance to liquidsTemperature-gradient oven method
BS EN ISO 2813:2000. Paints and varnishes. Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85°
BS EN ISO 28139:2009. Agricultural and forestry machinery. Knapsack combustion engine-driven mistblowers. Safety requirements
BS EN ISO 2814:2006, BS 3900-D4:2006. Paints and varnishes. Comparison of contrast ratio (hiding power) of paints of the same type and colour
BS EN ISO 2815:1998, BS 3900-E9:1976. Paints and varnishes. Buchholz indentation test
BS EN ISO 2815:2003, BS 3900-E9:2003. Paints and varnishes. Buchholz indentation test
BS EN ISO 28158:2010. Dentistry. Integrated dental floss and handles
BS EN ISO 2818:1996. Plastics. Preparation of test specimens by machining
BS EN ISO 2819:1995. Metallic coatings on metallic substrates. Electrodeposited and chemically deposited coatings. Review of methods available for testing adhesion
BS EN ISO 28199-1:2009. Paints and varnishes. Evaluation of properties of coating systems related to the application processRelevant vocabulary and preparation of test panels
BS EN ISO 28199-2:2009. Paints and varnishes. Evaluation of properties of coating systems related to the application processColour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling
BS EN ISO 28199-3:2009. Paints and varnishes. Evaluation of properties of coating systems related to the application processVisual assessment of sagging, formation of bubbles, pinholing and hiding power
BS EN ISO 2825:2010. Spices and condiments. Preparation of a ground sample for analysis
BS EN ISO 283:2007. Textile conveyor belts. Full thickness tensile strength, elongation at break and elongation at the reference load. Test method
BS EN ISO 28300:2008. Petroleum, petrochemical and natural gas industries. Venting of atmospheric and low-pressure storage tanks
BS EN ISO 283-1:2000. Textile conveyor belts. Full thickness tensile testingDetermination of tensile strength, elongation at break and elongation at the reference load
BS EN ISO 28319:2010. Dentistry. Laser welding
BS EN ISO 28399:2011. Dentistry. Products for external tooth bleaching
BS EN ISO 284:2003. Conveyor belts. Electrical conductivity. Specification and test method
BS EN ISO 284:2012. Conveyor belts. Electrical conductivity. Specification and test method
BS EN ISO 28439:2011. Workplace atmospheres. Characterization of ultrafine aerosols/nanoaerosols. Determination of the size distribution and number concentration using differential electrical mobility analysing systems
BS EN ISO 28460:2010. Petroleum and natural gas industries. Installation and equipment for liquefied natural gas. Ship-to-shore interface and port operations
BS EN ISO 2858:2010. End-suction centrifugal pumps (rating 16 bar). Designation, nominal duty point and dimensions
BS EN ISO 2860:2001. Earth-moving machinery. Minimum access dimensions
BS EN ISO 2860:2008. Earth-moving machinery. Minimum access dimensions
BS EN ISO 286-1:2010. Geometrical product specifications (GPS). SO code system for tolerances on linear sizesBasis of tolerances, deviations and fits
BS EN ISO 286-2:2010, ISO 286-2:1988. Geometrical product specifications (GPS). ISO code system for tolerances on linear sizesTables of standard tolerance classes and limit deviations for holes and shafts
BS EN ISO 2867:1999, BS 6912-15:1999. Earth-moving machinery. Access systems
BS EN ISO 2867:2006. Earth-moving machinery. Access systems
BS EN ISO 2867:2011. Earth-moving machinery. Access systems
BS EN ISO 287:2009. Paper and board. Determination of moisture content of a lot. Oven-drying method
BS EN ISO 2870:1994, ISO 2870:1986. Surface active agents. Detergents. Determination of anionic-active matter hydrolyzable and non-hydrolyzable under acid conditions
BS EN ISO 2870:2009. Surface active agents. Detergents. Determination of anionic-active matter hydrolysable and non-hydrolysable under acid conditions
BS EN ISO 28706-1:2011. Vitreous and porcelain enamels. Determination of resistance to chemical corrosionDetermination of resistance to chemical corrosion by acids at room temperature
BS EN ISO 28706-2:2011. Vitreous and porcelain enamels. Determination of resistance to chemical corrosionDetermination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours
BS EN ISO 28706-3:2011. Vitreous and porcelain enamels. Determination of resistance to chemical corrosionDetermination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel
BS EN ISO 28706-4:2011. Vitreous and porcelain enamels. Determination of resistance to chemical corrosionDetermination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
BS EN ISO 28706-5:2011. Vitreous and porcelain enamels. Determination of resistance to chemical corrosionDetermination of resistance to chemical corrosion in closed systems
BS EN ISO 2871-1:1994, ISO 2871-1:1988. High molecular mass cationic-active matter
BS EN ISO 2871-1:2010. Surface active agents. Detergents. Determination of cationic-active matter contentHigh-molecular-mass cationic-active matter
BS EN ISO 2871-2:1994, ISO 2871-2:1990. Surface active agents. Detergents. Determination of cationic-active matter contentCationic-active matter of low molecular mass (between 200 and 500)
BS EN ISO 2871-2:2010. Surface active agents. Detergents. Determination of cationic-active matter contentCationic-active matter of low molecular mass (between 200 and 500)
BS EN ISO 28721-1:2011. Vitreous and porcelain enamels. Glass-lined apparatus for process plantsQuality requirements for apparatus, components, appliances and accessories
BS EN ISO 28721-2:2011. Vitreous and porcelain enamels. Glass-lined apparatus for process plantsDesignation and specification of resistance to chemical attack and thermal shock
BS EN ISO 28721-3:2011. Vitreous and porcelain enamels. Glass-lined apparatus for process plantsThermal shock resistance
BS EN ISO 28721-4:2012. Vitreous and porcelain enamels. Glass-lined apparatus for process plantsQuality requirements for glass-lined flanged steel pipes and flanged steel fittings
BS EN ISO 28722:2011. Vitreous and porcelain enamels. Characteristics of enamel coatings applied to steel panels intended for architecture
BS EN ISO 28723:2011. Vitreous and porcelain enamels. Determination of the edge covering on enamelled steel plate to be used in heat exchangers
BS EN ISO 2873:2002. Packaging. Complete, filled transport packages and unit loads. Low pressure test
BS EN ISO 2875:2002. Packaging. Complete, filled transport packages and unit loads. Water-spray test
BS EN ISO 28762:2010. Vitreous and porcelain enamels. Enamel coatings applied to steel for writing surfaces. Specification
BS EN ISO 28763:2011. Vitreous and porcelain enamels. Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers. Specifications
BS EN ISO 28764:2011. Vitreous and porcelain enamels. Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron
BS EN ISO 28765:2011. Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
BS EN ISO 28781:2010. Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment
BS EN ISO 28802:2012. Ergonomics of the physical environment. Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people
BS EN ISO 28803:2012. Ergonomics of the physical environment. Application of international standards to people with special requirements
BS EN ISO 2884-1:2006, BS 3900-A7-1:2006. Paints and varnishes. Determination of viscosity using rotary viscometersCone-and-plate viscometer operated at a high rate of shear
BS EN ISO 2884-2:2006, BS 3900-A7-2:2003. Paints and varnishes. Determination of viscosity using rotary viscometersDisc or ball viscometer operated at a specified speed
BS EN ISO 28881:2013. Machine tools. Safety. Electro-discharge machines
BS EN ISO 28888:2013. Dentistry. Screening method for erosion potential of oral rinses on dental hard tissues
BS EN ISO 28927-1:2009. Hand-held portable power tools. Test methods for evaluation of vibration emissionAngle and vertical grinders
BS EN ISO 28927-10:2011. Hand-held portable power tools. Test methods for evaluation of vibration emissionPercussive drills, hammers and breakers
BS EN ISO 28927-11:2011. Hand-held portable power tools. Test methods for evaluation of vibration emissionStone hammers
BS EN ISO 28927-12:2012. Hand-held portable power tools. Test methods for evaluation of vibration emissionDie grinders
BS EN ISO 28927-2:2009. Hand-held portable power tools. Test methods for evaluation of vibration emissionWrenches, nutrunners and screwdrivers
BS EN ISO 28927-3:2009. Hand-held portable power tools. Test methods for evaluation of vibration emissionPolishers and rotary, orbital and random orbital sanders
BS EN ISO 28927-4:2010. Hand-held portable power tools. Test methods for evaluation of vibration emissionStraight grinders
BS EN ISO 28927-5:2009. Hand-held portable power tools. Test methods for evaluation of vibration emissionDrills and impact drills
BS EN ISO 28927-6:2009. Hand-held portable power tools. Test methods for evaluation of vibration emissionRammers
BS EN ISO 28927-7:2009. Hand-held portable power tools. Test methods for evaluation of vibration emissionNibblers and shears
BS EN ISO 28927-8:2009. Hand-held portable power tools. Test methods for evaluation of vibration emissionSaws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action
BS EN ISO 28927-9:2009. Hand-held portable power tools. Test methods for evaluation of vibration emissionScaling hammers and needle scalers
BS EN ISO 28941-1:2008. Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 2897-1:1999. Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 2897-2:1999. Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 2897-2:2003. Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 2898-1:2000. Plastics. Plasticized poly (vinyl chloride) (PVC-P) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 2898-2:2000. Plastics. Plasticized poly (vinyl chloride) (PVC-P) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 2898-2:2008. Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materialsPreparation of test specimens and determination of properties (ISO 2898-2:2008)
BS EN ISO 29022:2013. Dentistry. Adhesion. Notched-edge shear bond strength test
BS EN ISO 291:1997. Plastics. Standard atmospheres for conditioning and testing
BS EN ISO 291:2005. Plastics. Standard atmospheres for conditioning and testing
BS EN ISO 291:2008. Plastics. Standard atmospheres for conditioning and testing
BS EN ISO 2922:2000+A1:2013. Acoustics. Measurement of airborne sound emitted by vessels on inland waterways and harbours
BS EN ISO 293:2003. Plastics. Compression moulding test specimens of thermoplastic materials
BS EN ISO 293:2005. Plastics. Compression moulding of test specimens of thermoplastic materials
BS EN ISO 2931:2010. Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
BS EN ISO 294-1:1998, BS 2782-9:Method 910B:1997. Plastics. Injection moulding of test specimens of thermoplastic materialsGeneral principles, and moulding of multipurpose and bar test specimens
BS EN ISO 294-2:1998, BS 2782-9:Method 910C:1997. Plastics. Injection moulding of test specimens of thermoplastic materialsSmall tensile bars
BS EN ISO 294-3:1998, BS 2782-9:Method 910D:1997. Plastics. Injection moulding of test specimens of thermoplastic materialsSmall plates
BS EN ISO 294-3:2003. Plastics. Injection moulding of test specimens of thermoplastic materialsSmall plates
BS EN ISO 294-4:1998, BS 2782-9:Method 910E:1997. Plastics. Injection moulding of test specimens of thermoplastic materialsDetermination of moulding shrinkage
BS EN ISO 294-4:2003. Plastics. Injection moulding of test specimens of thermoplastic materialsDetermination of moulding shrinkage
BS EN ISO 294-5:2013. Plastics. Injection moulding of test specimens of thermoplastic materialsPreparation of standard specimens for investigating anisotropy
BS EN ISO 29461-1:2013. Air intake filter systems for rotary machinery. Test methodsStatic filter elements
BS EN ISO 29462:2013. Field testing of general ventilation filtration devices and systems for in situ removal efficiency by particle size and resistance to airflow
BS EN ISO 295:1999, BS 2782-9:Method 902A:1992. Plastics. Compression moulding of test specimens of thermosetting materials
BS EN ISO 295:2004. Plastics. Compression moulding of test specimens of thermosetting materials
BS EN ISO 29601:2011. Paints and varnishes. Corrosion protection by protective paint systems. Assessment of porosity in a dry film
BS EN ISO 29621:2011. Cosmetics. Microbiology. Guidelines for the risk assessment and identification of microbiologically low-risk products
BS EN ISO 29701:2010. Nanotechnologies. Endotoxin test on nanomaterial samples for in vitro systems. Limulus amebocyte lysate (LAL) test
BS EN ISO 3001:1999. Plastics. Epoxy compounds. Determination of epoxy equivalent
BS EN ISO 30013:2011. Rubber and plastics hoses. Methods of exposure to laboratory light sources. Determination of changes in colour, appearance and other physical properties
BS EN ISO 30023:2012. Textiles. Qualification symbols for labelling workwear to be industrially laundered
BS EN ISO 30024:2009. Animal feeding stuffs. Determination of phytase activity
BS EN ISO 3035:2011. Corrugated fibreboard. Determination of flat crush resistance
BS EN ISO 3037:1996. Corrugated fibreboard. Determination of edgewise crush resistance (unwaxed edge method)
BS EN ISO 3037:2007. Corrugated fibreboard. Determination of edgewise crush resistance (unwaxed edge method)
BS EN ISO 3037:2013. Corrugated fibreboard. Determination of edgewise crush resistance (unwaxed edge method)
BS EN ISO 3040:2012. Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
BS EN ISO 305:1999. Plastics. Determination of thermal stability of poly (vinyl chloride) related chlorine-containing homopolymers and copolymers and their compounds. Discoloration method
BS EN ISO 3059:2001. Non-destructive testing. Penetrant testing and magnetic particle testing. Viewing conditions
BS EN ISO 3059:2012. Non-destructive testing. Penetrant testing and magnetic particle testing. Viewing conditions
BS EN ISO 306:1997, BS 2782-1:Meth120A,B,D,E:1990. Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
BS EN ISO 306:2004. Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
BS EN ISO 307:1998. Plastics. Polyamides. Determination of viscosity number
BS EN ISO 307:2003. Plastics. Polyamides. Determination of viscosity number
BS EN ISO 307:2007+A1:2013. Plastics. Polyamides. Determination of viscosity number
BS EN ISO 3071:2006. Textiles. Determination of pH of aqueous extract
BS EN ISO 308:1998, BS 2782-4:Method 451C:1998. Plastics. Phenolic moulding materials. Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
BS EN ISO 3093:2007. Wheat, rye and respective flours, durum wheat and durum wheat semolina. Determination of the Falling Number according to Hagberg-Perten
BS EN ISO 3093:2009. Wheat, rye and their flours, durum wheat and durum wheat semolina. Determination of the falling number according to Hagberg-Perten
BS EN ISO 3095:2005. Railway applications. Acoustics. Measurement of noise emitted by railbound vehicles
BS EN ISO 3095:2013. Acoustics. Railway applications. Measurement of noise emitted byrailbound vehicles
BS EN ISO 3098-0:1998. Technical product documentation. Lettering.General requirements
BS EN ISO 3098-2:2000. Technical product documentation. Lettering.Latin alphabet, numerals and marks
BS EN ISO 3098-3:2000. Technical product documentation. Lettering.Greek alphabet
BS EN ISO 3098-4:2000. Technical product documentation. Lettering.Diacritical and particular marks for the Latin alphabet
BS EN ISO 3098-5:1998. Technical product documentation. Lettering.CAD lettering of the Latin alphabet, numerals and marks
BS EN ISO 3098-6:2000. Technical product documentation. Lettering.Cyrillic alphabet
BS EN ISO 3104:1996, BS 2000-71.1:1996,ISO 3104:1994. Methods of test for petroleum and its products. Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
BS EN ISO 3107:2004. Dentistry. Zinc oxide/eugenol and zinc oxide/non-eugenol cements
BS EN ISO 3107:2011. Dentistry. Zinc oxide/eugenol cements and zinc oxide/ non-eugenol cements
BS EN ISO 3126:2005. Plastics piping systems. Plastics components. Determination of dimensions
BS EN ISO 3146:1997, BS 2782-1:Meth 125A to C2:1991. Plastics. Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers
BS EN ISO 3146:2000. Plastics. Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
BS EN ISO 3164:2000, BS 6912-7:2000. Earth-moving machinery. Laboratory evaluations of protective structures. Specifications for deflection-limiting volume
BS EN ISO 3164:2008. Earth-moving machinery. Laboratory evaluations of protective structures. Specifications for deflection-limiting volume
BS EN ISO 3164:2013. Earth-moving machinery. Laboratory evaluations of protective structures.Specifications for deflection-limiting volume
BS EN ISO 3166-1:1998. Codes for the representation of names of countries and their subdivisionsCountry codes
BS EN ISO 3166-1:2006. Codes for the representation of names of countries and their subdivisionsCountry codes
BS EN ISO 3167:1997, BS 2782-9:Method 931A:1993,ISO 3167:1993. Plastics. Multipurpose-test specimens
BS EN ISO 3167:2003. Plastics. Multipurpose test specimens
BS EN ISO 3170:1999. Petroleum liquids. Manual sampling
BS EN ISO 3170:2004, BS 2000-475:2004. Methods of test for petroleum and its products. BS 2000-475: Petroleum liquids. Manual sampling
BS EN ISO 3171:1999, BS 2000-476:2002. Methods of test for petroleum and its products. BS 2000-476: Petroleum liquids. Automatic pipeline sampling
BS EN ISO 3175:1996. Textiles. Evaluation of stability to machine dry-cleaning
BS EN ISO 3175-1:1998. Textiles. Dry cleaning and finishingMethod for assessing the cleanability of textiles and garments
BS EN ISO 3175-1:2010. Textiles. Professional care, drycleaning and wetcleaning of fabrics and garmentsAssessment of performance after cleaning and finishing
BS EN ISO 3175-2:1998. Textiles. Dry cleaning and finishingProcedures for tetrachloroethene
BS EN ISO 3175-2:2010. Textiles. Professional care, drycleaning and wetcleaning of fabrics and garmentsProcedure for testing performance when cleaning and finishing using tetrachloroethene
BS EN ISO 3175-3:2003. Textiles. Professional care, drycleaning and wetcleaning of fabrics and garmentsProcedure for testing performance when cleaning and finishing using hydrocarbon solvent
BS EN ISO 3175-4:2003. Textiles. Professional care, drycleaning and wetcleaning of fabrics and garmentsProcedure for testing performance when cleaning and finishing using simulated wetcleaning
BS EN ISO 3183:2012. Petroleum and natural gas industries. Steel pipe for pipeline transportation systems
BS EN ISO 3188:1994. Starches and derived products. Determination of nitrogen content by the Kjeldahl method. Titrimetric method
BS EN ISO 3210:2010. Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution
BS EN ISO 32100:2010. Rubber- or plastics-coated fabrics. Physical and mechanical tests. Determination of flex resistance by the flexometer method
BS EN ISO 3211:2010. Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking by deformation
BS EN ISO 3219:1995, BS 2782-7:Method 730B:1994. Plastics. Polymers/resins in the liquid state or as emulsions or dispersions. Determination of viscosity using a rotational viscometer with defined shear rate
BS EN ISO 3231:1998, BS 3900-F8:1993. Paints and varnishes. Determination of resistance to humid atmospheres containing sulfur dioxide
BS EN ISO 3233-1:2013. Paints and varnishes. Determination of the percentage volume of non-volatile matterMethod using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle
BS EN ISO 3248:2001, BS 3900-G7:1998. Paints and varnishes. Determination of the effect of heat
BS EN ISO 3251:1995, BS 3900-B18:1994. Paints and varnishes. Determination of non-volatile matter of paints, varnishes and binders for paints and varnishes
BS EN ISO 3251:2003, BS 3900-B18:2003. Paints, varnishes and plastics. Determination of non-volatile-matter content
BS EN ISO 3251:2008. Paints, varnishes and plastics. Determination of non- volatile-matter content
BS EN ISO 3252:2000. Powder metallurgy. Vocabulary
BS EN ISO 3262-1:1998. Extenders for paints. Specifications and methods of test.Introduction and general test methods
BS EN ISO 3262-10:2000. Extenders for paints. Specifications and methods of test.Natural talc/chlorite in lamellar form
BS EN ISO 3262-11:2000. Extenders for paints. Specifications and methods of test.Natural talc, in lamellar form, containing carbonates
BS EN ISO 3262-12:2001. Extenders for paints. Specifications and methods of test.Muscovite-type mica
BS EN ISO 3262-13:1998. Extenders for paints. Specifications and methods of test.Natural quartz (ground)
BS EN ISO 3262-14:2000. Extenders for paints. Specifications and methods of test.Cristobalite
BS EN ISO 3262-15:2000. Extenders for paints. Specifications and methods of test.Vitreous silica
BS EN ISO 3262-16:2000. Extenders for paints. Specifications and methods of test.Aluminium hydroxides
BS EN ISO 3262-17:2000. Extenders for paints. Specifications and methods of test.Precipitated calcium silicate
BS EN ISO 3262-18:2000. Extenders for paints. Specifications and methods of test.Precipitated sodium aluminium silicate
BS EN ISO 3262-19:2000. Extenders for paints. Specifications and methods of test.Precipitated silica
BS EN ISO 3262-2:1998. Extenders for paints. Specifications and methods of test.Barytes (natural barium sulfate)
BS EN ISO 3262-20:2000. Extenders for paints. Specifications and methods of test.Fumed silica
BS EN ISO 3262-21:2000. Extenders for paints. Specifications and methods of test.Silica sand (unground natural quartz)
BS EN ISO 3262-22:2001. Extenders for paints. Specifications and methods of test.Flux-calcined kieselguhr
BS EN ISO 3262-3:1998. Extenders for paints. Specifications and methods of test.Blanc fixe
BS EN ISO 3262-4:1998. Extenders for paints. Specifications and methods of test.Whiting
BS EN ISO 3262-5:1998. Extenders for paints. Specifications and methods of test.Natural crystalline calcium carbonate
BS EN ISO 3262-6:1998. Extenders for paints. Specifications and methods of test.Precipitated calcium carbonate
BS EN ISO 3262-7:1998. Extenders for paints. Specifications and methods of test.Dolomite
BS EN ISO 3262-8:2000. Extenders for paints. Specifications and methods of test.Natural clay
BS EN ISO 3262-9:1998. Extenders for paints. Specifications and methods of test.Calcined clay
BS EN ISO 3266:2010. Forged steel eyebolts grade 4 for general lifting purposes
BS EN ISO 3269:2001. Fasteners. Acceptance inspection
BS EN ISO 3274:1998. Geometric product specifications (GPS). Surface texture. Profile method. Nominal characteristics of contact (stylus) instruments
BS EN ISO 3325:1999. Sintered metal materials, excluding hardmetals. Determination of transverse rupture strength
BS EN ISO 3326:2013. Hardmetals. Determination of (the magnetization) coercivity
BS EN ISO 3327:2009. Hardmetals. Determination of transverse rupture strength
BS EN ISO 3336:1996. Dentistry. Synthetic polymer teeth
BS EN ISO 3344:1997. Reinforcement products. Determination of moisture content
BS EN ISO 3369:2010. Impermeable sintered metal materials and hardmetals. Determination of density
BS EN ISO 3376:2002. Leather. Physical and mechanical tests. Determination of tensile strength and percentage extension
BS EN ISO 3376:2011. Leather. Physical and mechanical tests. Determination of tensile strength and percentage extension
BS EN ISO 3377-1:2002. Leather. Physical and mechanical tests. Determination of tear loadSingle edge tear
BS EN ISO 3377-1:2011. Leather. Physical and mechanical tests. Determination of tear loadSingle edge tear
BS EN ISO 3377-2:2002. Leather. Physical and mechanical tests. Determination of tear loadDouble edge tear
BS EN ISO 3378:2002. Leather. Physical and mechanical tests. Determination of resistance to grain cracking and grain crack index
BS EN ISO 3380:2002. Leather. Physical and mechanical tests. Determination of shrinkage temperature up to 100 degrees C
BS EN ISO 3381:2005. Railway applications. Acoustics. Measurement of noise inside railbound vehicles
BS EN ISO 3381:2011. Railway applications. Acoustics. Measurement of noise inside railbound vehicles
BS EN ISO 3382:2000. Acoustics. Measurement of the reverberation time of rooms with reference to other acoustical parameters
BS EN ISO 3382-1:2009. Acoustics. Measurement of room acoustic parametersPerformance spaces
BS EN ISO 3382-2:2008. Acoustics. Measurement of room acoustic parametersReverberation time in ordinary rooms
BS EN ISO 3382-3:2012. Acoustics. Measurement of room acoustic parametersOpen plan offices
BS EN ISO 3385:1995. Flexible cellular polymeric materials. Determination of fatigue by constant-load pounding
BS EN ISO 3386-1:1997+A1:2010. Polymeric materials, cellular flexible. Determination of stress-strain characteristics in compressionLow-density materials
BS EN ISO 3386-2:1998+A1:2010. Flexible cellular polymeric materials. Determination of stress-strain characteristics in compressionHigh-density materials
BS EN ISO 340:2004. Conveyor belts. Laboratory cale flammability characteristics. Requirements and test method
BS EN ISO 340:2013. Conveyor belts. Laboratory scale flammability characteristics. Requirements and test method
BS EN ISO 3405:2000, BS 2000-123:2001. Methods of test for petroleum and its products. Petroleum products. Determination of distillation characteristics at atmospheric pressure
BS EN ISO 3405:2011, BS 2000-123:2011. Petroleum products. Determination of distillation characteristics at atmospheric pressure
BS EN ISO 3411:2000, BS 6912-28:2000. Earth-moving machinery. Human physical dimensions of operators and minimum operator space envelope
BS EN ISO 3411:2007. Earth-moving machinery. Physical dimensions of operators and minimum operator space envelope
BS EN ISO 3449:2005. Earth-moving machinery. Falling object protective structures. Laboratory tests and performance requirements
BS EN ISO 3449:2008. Earth-moving machinery. Falling-object protective structures. Laboratory tests and performance requirements
BS EN ISO 3450:1996. Safety of earth-moving machinery. Specification for braking systems and performance requirements and test procedures for rubber-tyred machines
BS EN ISO 3450:2008. Earth-moving machinery. Braking systems of rubber-tyred machines. Systems and performance requirements and test procedures
BS EN ISO 3450:2011. Earth-moving machinery. Wheeled or high-speed rubber-tracked machines. Performance requirements and test procedures for brake systems
BS EN ISO 3451-1:1997, BS 2782-4:Method 470A:1997. Plastics. Determination of ashGeneral methods
BS EN ISO 3451-1:2008. Plastics. Determination of ashGeneral methods
BS EN ISO 3451-4:1996. Plastics. Determination of ashPolyamides
BS EN ISO 3451-4:2000. Plastics. Determination of ashPolyamides
BS EN ISO 3451-5:1997, BS 2782-4:Method 470E:1991. Plastics. Determination of ashPoly(vinyl chloride)
BS EN ISO 3451-5:2002. Plastics. Determination of ashPoly(vinyl chloride)
BS EN ISO 3452-1:2013. Non-destructive testing. Penetrant testingGeneral principles
BS EN ISO 3452-2:2000. Non-destructive testing. Penetrant testingTesting of penetrant materials
BS EN ISO 3452-2:2006. Non-destructive testing. Penetrant testingTesting of penetrant materials
BS EN ISO 3452-3:1999. Non-destructive testing. Penetrant testingReference test blocks
BS EN ISO 3452-4:1999. Non-destructive testing. Penetrant testingEquipment
BS EN ISO 3452-5:2008. Non-destructive testing. Penetrant testingPenetrant testing at temperatures higher than 50 degrees C
BS EN ISO 3452-6:2008. Non-destructive testing. Penetrant testingPenetrant testing at temperatures lower than 10 degrees C
BS EN ISO 3457:1995. Earth-moving machinery. Guards and shields. Definitions and specifications
BS EN ISO 3457:2003. Earth-moving machinery. Guards. Definitions and requirements
BS EN ISO 3457:2008. Earth-moving machinery. Guards. Definitions and requirements
BS EN ISO 3471:2008. Earth-moving machinery. Roll-over protective structures. Laboratory tests and performance requirements
BS EN ISO 3493:2007. Vanilla. Vocabulary
BS EN ISO 3497:2001. Metallic coatings. Measurement of coating thickness. X-ray spectrometric methods
BS EN ISO 3506-1:1998. Mechanical properties of corrosion-resistant stainless-steel fastenersBolts, screws and studs
BS EN ISO 3506-1:2009. Mechanical properties of corrosion-resistant stainless steel fastenersBolts, screws and studs
BS EN ISO 3506-2:1998. Mechanical properties of corrosion-resistant stainless-steel fastenersNuts
BS EN ISO 3506-2:2009. Mechanical properties of corrosion-resistant stainless steel fastenersNuts
BS EN ISO 3506-3:1998. Mechanical properties of corrosion-resistant stainless-steel fastenersSet screws and similar fasteners not under tensile stress
BS EN ISO 3506-3:2009. Mechanical properties of corrosion-resistant stainless steel fastenersSet screws and similar fasteners not under tensile stress
BS EN ISO 3506-4:2003. Mechanical properties of corrosion-resistant stainless-steel fastenersTapping screws
BS EN ISO 3506-4:2009. Mechanical properties of corrosion-resistant stainless steel fastenersTapping screws
BS EN ISO 3521:2000, BS 2782-6:Method 644A:1997. Plastics. Unsaturated polyester and epoxy resins. Determination of overall volume shrinkage
BS EN ISO 354:2003. Acoustics. Measurement of sound absorption in a reverberation room
BS EN ISO 3543:1995. Metallic and non-metallic coatings. Measurement of thickness. Beta backscatter method
BS EN ISO 3543:2001. Metallic and non-metallic coatings. Measurement of thickness. Beta backscatter method
BS EN ISO 3549:2002. Zinc dust pigments for paints. Specifications and test methods
BS EN ISO 3580:2008. Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification
BS EN ISO 3580:2011. Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification
BS EN ISO 3581:2012. Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat-resisting steels. Classification
BS EN ISO 3582:2001. Flexible cellular polymeric materials. Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame
BS EN ISO 3593:1994. Starch. Determination of ash
BS EN ISO 3596:2001, BS 684-2.7:2001. Animal and vegetable fats and oils. Determination of unsaponifiable matter. Method using diethyl ether extraction
BS EN ISO 3596-1:2000. Animal and vegetable fats and oils. Determination of unsaponifiable matter. Method using diethyl ether extraction (Reference method)
BS EN ISO 3596-2:2000. Animal and vegetable fats and oils. Determination of unsaponifiable matter. Rapid method using hexane extraction
BS EN ISO 3611:2010. Geometrical product specifications (GPS). Dimensional measuring equipment. Micrometers for external measurements. Design and metrological characteristics
BS EN ISO 3613:1995. Chromate conversion coatings on zinc and cadmium. Test methods
BS EN ISO 3613:2001. Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys. Test methods
BS EN ISO 3613:2010. Metallic and other inorganic coatings. Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys. Test methods
BS EN ISO 3630-1:1995. Dental root-canal instrumentsFiles, reamers, barbed broaches, rasps, paste carriers, explorers and cotton broaches
BS EN ISO 3630-1:2008. Dentistry. Root-canal instrumentsGeneral requirements and test methods
BS EN ISO 3630-2:2001. Dental root-canal instrumentsEnlargers
BS EN ISO 3630-2:2013. Dentistry. Endodontic instrumentsEnlargers
BS EN ISO 3630-3:1997. Dental root-canal instrumentsCondensers, pluggers and spreaders
BS EN ISO 3630-4:2009. Dentistry. Root canal instrumentsAuxiliary instruments
BS EN ISO 3630-5:2011. Dentistry. Endodontic instrumentsShaping and cleaning instruments
BS EN ISO 3650:1999. Geometrical product specifications (GPS). Length standards. Gauge blocks
BS EN ISO 3651-1:1998. Determination of resistance to intergranular corrosion of stainless steelsAustenitic and ferritic-austenitic (duplex) stainless steels. Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
BS EN ISO 3651-2:1998. Determination of resistance to intergranular corrosion of stainless steelsFerritic, austenitic and ferritic-austenitic (duplex) stainless steels. Corrosion test in media containing sulfuric acid
BS EN ISO 3656:2002. Animal and vegetable fats and oils. Determination of ultraviolet absorbance expressed as specific UV extinction
BS EN ISO 3656:2011. Animal and vegetable fats and oils. Determination of ultraviolet absorbance expressed as specific UV extinction
BS EN ISO 3657:2003. Animal and vegetable fats and oils. Determination of saponification value
BS EN ISO 3657:2013. Animal and vegetable fats and oils. Determination of saponification value
BS EN ISO 3661:2010, ISO 3661:1977. End-suction centrifugal pumps. Baseplate and installation dimensions
BS EN ISO 3665:2013. Photography. Intra-oral dental radiographic film and film packets. Manufacturer specifications
BS EN ISO 3668:2001, BS 3900-D1:1998. Paints and varnishes. Visual comparison of the colour of paints
BS EN ISO 3671:1999, BS 2782-4:Method 461A:1978. Plastics. Aminoplastic moulding materials. Determination of volatile matter
BS EN ISO 3672-1:2001. Plastics. Unsaturated-polyester resins (UP-R)Designation system
BS EN ISO 3672-2:2001. Plastics. Unsaturated-polyester resins (UP-R)Preparation of test specimens and determination of properties
BS EN ISO 3673-1:2000. Plastics. Epoxy resinsDesignation
BS EN ISO 3673-2:2000. Plastics. Epoxy resinsPreparation of test specimens and determination of properties
BS EN ISO 3673-2:2012. Plastics. Epoxy resinsPreparation of test specimens and determination of properties of crosslinked epoxy resins
BS EN ISO 3675:1996. Crude petroleum and liquid petroleum products. Laboratory determination of density or relative density. Hydrometer method
BS EN ISO 3675:1998, BS 2000-160:1998,ISO 3675:1998. Crude petroleum and liquid petroleum products. Laboratory determination of density. Hydrometer method
BS EN ISO 3677:1995. Filler metal for soft soldering, brazing and braze welding. Designation
BS EN ISO 3678:1995, BS 3900-C8:1978. Paints and varnishes. Print-free test
BS EN ISO 3679:2004, BS 2000-523:2004. Methods of test for petroleum and its products. BS 2000-523. Determination of flash point. Rapid equilibrium closed cup method
BS EN ISO 3680:2004, BS 2000-524:2004. Methods of test for petroleum and its products. BS 2000-524. Determination of flash/no flash. Rapid equilibrium closed cup method
BS EN ISO 3681:1998, BS 6782-2:1996. Binders for paints and varnishes. Determination of saponification value. Titrimetric method
BS EN ISO 3682:1998, BS 6782-3:1996. Binders for paints and varnishes. Determination of acid value. Titrimetric method
BS EN ISO 3690:2001. Welding and allied processes. Determination of hydrogen content in ferritic steel arc weld metal
BS EN ISO 3690:2012. Welding and allied processes. Determination of hydrogen content in arc weld metal
BS EN ISO 3691-1:2012. Industrial trucks. Safety requirements and verificationSelf-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
BS EN ISO 3691-5:2009. Industrial trucks. Safety requirements and verificationPedestrian-propelled trucks
BS EN ISO 3696:1995. Water for analytical laboratory use. Specification and test methods
BS EN ISO 3715-1:2004. Ships and marine technology. Propulsion plants for shipsVocabulary for geometry of propellers
BS EN ISO 3715-2:2002. Ships and marine technology. Propulsion plants for shipsVocabulary for controllable-pitch propeller plants
BS EN ISO 3727:1995. Butter. Determination of water, solids-not-fat and fat contents on the same test portion (reference method)
BS EN ISO 3727-1:2002. Butter. Determination of moisture, non-fat solids and fat contentsDetermination of moisture content (Reference method)
BS EN ISO 3727-2:2002. Butter. Determination of moisture, non-fat solids and fat contentsDetermination of non-fat solids content (Reference method)
BS EN ISO 3727-3:2003. Butter. Determination of moisture, non-fat solids and fat contentsCalculation of fat content
BS EN ISO 3735:1996. Crude petroleum and fuel oils. Determination of sediment. Extraction method
BS EN ISO 3735:1999, BS 2000-53:1999. Crude petroleum and fuel oils. Determination of sediment. Extraction method
BS EN ISO 3738-1:2010. Hardmetals. Rockwell hardness test (scale A)Test method
BS EN ISO 3738-2:2006. Hardmetals. Rockwell hardness test (scale A)Preparation and calibration of standard test blocks
BS EN ISO 3740:2001. Acoustics. Determination of sound power levels of noise sources. Guidelines for the use of basic standards
BS EN ISO 3741:2000. Acoustics. Determination of sound power levels of noise sources using sound pressure. Precision methods for reverberation rooms
BS EN ISO 3741:2009. Acoustics. Determination of sound power levels of noise sources using sound pressure. Precision methods for reverberation rooms
BS EN ISO 3741:2010. Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Precision methods for reverberation test rooms
BS EN ISO 3743-1:1995. Acoustics. Determination of sound power levels of noise sources. Engineering methods for small, movable sources in reverberant fieldsComparison for hard-walled test rooms
BS EN ISO 3743-1:2009. Acoustics. Determination of sound power levels of noise sources. Engineering methods for small, movable sources in reverberant fieldsComparison method for hard-walled test rooms
BS EN ISO 3743-1:2010. Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for small movable sources in reverberant fieldsComparison method for a hard-walled test room
BS EN ISO 3743-2:1997. Acoustics. Determination of sound power levels of noise sources. Engineering methods for small, movable sources in reverberant fieldsMethods for special reverberation test rooms
BS EN ISO 3743-2:2009. Acoustics. Determination of sound power levels of noise sources using sound pressure. Engineering methods for small, movable sources in reverberant fieldsMethods for special reverberation test rooms
BS EN ISO 3744:1995. Acoustics. Determination of sound power levels of noise sources using sound pressure. Engineering method in an essentially free field over a reflecting plane
BS EN ISO 3744:2009. Acoustics. Determination of sound power levels of noise sources using sound pressure. Engineering method in an essentially free field over a reflecting plane
BS EN ISO 3744:2010. Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for an essentially free field over a reflecting plane
BS EN ISO 3745:2003. Acoustics. Determination of sound power levels of noise sources using sound pressure. Precision methods for anechoic and hemi-anechoic rooms
BS EN ISO 3745:2009. Acoustics. Determination of sound power levels of noise sources using sound pressure. Precision methods for anechoic and semi-anechoic rooms
BS EN ISO 3745:2012. Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Precision methods for anechoic rooms and hemi-anechoic rooms
BS EN ISO 3746:1996. Acoustics. Determination of sound power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
BS EN ISO 3746:2009. Acoustics. Determination of sound power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
BS EN ISO 3746:2010. Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
BS EN ISO 3747:2000. Acoustics. Determination of sound power levels of noise sources using sound pressure. Comparison method in situ
BS EN ISO 3747:2009. Acoustics. Determination of sound power levels of noise sources using sound pressure. Comparison method in situ
BS EN ISO 3747:2010. Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering/survey methods for use in situ in a reverberant environment
BS EN ISO 3758:2005. Textiles. Care labelling code using symbols
BS EN ISO 3758:2012. Textiles. Care labelling code using symbols
BS EN ISO 3759:1995. Textiles. Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
BS EN ISO 3759:2008. Textiles. Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
BS EN ISO 3759:2011. Textiles. Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
BS EN ISO 376:2002. Metallic materials. Calibration of force-proving instruments used for the verification of uniaxial testing machines
BS EN ISO 376:2004. Metallic materials. Calibration of force-proving instruments used for the verification of uniaxial testing machines
BS EN ISO 376:2011. Metallic materials. Calibration of force-proving instruments used for the verification of uniaxial testing machines
BS EN ISO 3766:1999. Construction drawings. Simplified representation of concrete reinforcement
BS EN ISO 3767-1:1996. Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displaysCommon symbols
BS EN ISO 377:1997. Steel and steel products. Location and preparation of samples and test pieces for mechanical testing
BS EN ISO 377:2013. Steel and steel products. Location and preparation of samples and test pieces for mechanical testing
BS EN ISO 3785:1995. Steel. Designation of test piece axes
BS EN ISO 3785:2006. Metallic materials. Designation of test specimen axes in relation to product texture
BS EN ISO 3796:2001. Ships and marine technology. Clear openings for external single-leaf doors
BS EN ISO 3807:2013. Gas cylinders. Acetylene cylinders. Basic requirements and type testing
BS EN ISO 3815-1:2005. Zinc and zinc alloysAnalysis of solid samples by optical emission spectrometry
BS EN ISO 3815-2:2005. Zinc and zinc alloysAnalysis by inductively coupled plasma optical emission spectrometry
BS EN ISO 3821:2010. Gas welding equipment. Rubber hoses for welding, cutting and allied processes
BS EN ISO 3822-1:1999+A1:2008. Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installationsMethod of measurement
BS EN ISO 3822-2:1996. Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installationsMounting and operating conditions for draw-off taps and mixing valves
BS EN ISO 3822-3:1997+A1:2009. Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installationsMounting and operating conditions for in-line valves and appliances
BS EN ISO 3822-4:1997. Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installationsMounting and operating conditions for special appliances
BS EN ISO 3823-1:1999. Dental rotary instruments. BursSteel and carbide burs
BS EN ISO 3823-2:2003+A1:2008. Dentistry. Rotary bur instrumentsFinishing burs
BS EN ISO 3826-1:2003. Plastics collapsible containers for human blood and blood componentsConventional containers
BS EN ISO 3826-1:2013. Plastics collapsible containers for human blood and blood componentsConventional containers
BS EN ISO 3826-2:2008. Plastics collapsible containers for human blood and blood componentsGraphical symbols for use on labels and instruction leaflets
BS EN ISO 3826-3:2007. Plastics collapsible containers for human blood and blood componentsBlood bag systems with integrated features
BS EN ISO 3830:1996, BS 2000-270:1996. Petroleum products. Determination of lead content of gasoline. Iodine monochloride method
BS EN ISO 3834-1:2005. Quality requirements for fusion welding of metallic materialsCriteria for the selection of the appropriate level of quality requirements
BS EN ISO 3834-2:2005. Quality requirements for fusion welding of metallic materialsComprehensive quality requirements
BS EN ISO 3834-3:2005. Quality requirements for fusion welding of metallic materialsStandard quality requirements
BS EN ISO 3834-4:2005. Quality requirements for fusion welding of metallic materialsElementary quality requirements
BS EN ISO 3834-5:2005. Quality requirements for fusion welding of metallic materialsDocuments with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4
BS EN ISO 3838:1996, BS 2000-189/190:1998. Methods for determination of density or relative density of petroleum and petroleum products (pyknometer methods)
BS EN ISO 385:2005. Laboratory glassware. Burettes
BS EN ISO 3861:1997. Rubber hoses for sand and grit blasting. Specification
BS EN ISO 3861:2008. Rubber hoses for sand and grit blasting. Specification
BS EN ISO 3868:1995. Metallic and other non-organic coatings. Measurement of coating thicknesses. Fizeau multiple-beam interferometry method
BS EN ISO 3882:1995. Metallic and other non-organic coatings. Review of methods of measurement of thickness
BS EN ISO 3882:2003. Metallic and other inorganic coatings. Review of methods of measurement of thickness
BS EN ISO 3887:2003. Steels. Determination of depth of decarburization
BS EN ISO 389:1997. Acoustics. Standard reference zero for the calibration of pure tone air conduction audiometers
BS EN ISO 389-1:2000. Acoustics. Reference zero for the calibration of audiometric equipmentReference equivalent threshold sound pressure levels for pure tones and supra-aural earphones
BS EN ISO 3892:1995. Conversion coatings on metallic materials. Determination of coating mass per unit area. Gravimetric methods
BS EN ISO 389-2:1997. Acoustics. Reference zero for the calibration of audiometric equipmentReference equivalent threshold sound pressure levels for pure tones and insert earphones
BS EN ISO 3892:2001. Conversion coatings on metallic materials. Determination of coating mass per unit area. Gravimetric methods
BS EN ISO 389-3:1999. Acoustics. Reference zero for the calibration of audiometric equipmentReference equivalent threshold force levels for pure tones and bone vibrators
BS EN ISO 389-4:1999. Acoustics. Reference zero for the calibration of audiometric equipmentReference levels for narrow-band masking noise
BS EN ISO 389-5:2001. Acoustics. Reference zero for the calibration of audiometric equipmentReference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz
BS EN ISO 389-5:2006. Acoustics. Reference zero for the calibration of audiometric equipmentReference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz
BS EN ISO 389-6:2007. Acoustics. Reference zero for the calibration of audiometric equipmentReference threshold of hearing for test signals of short duration
BS EN ISO 389-7:1998. Acoustics. Reference zero for the calibration of audiometric equipmentReference threshold of hearing under free-field and diffuse-field listening conditions
BS EN ISO 389-7:2005. Acoustics. Reference zero for the calibration of audiometric equipmentReference threshold of hearing under free-field and diffuse-field listening conditions
BS EN ISO 389-8:2004. Acoustics. Reference zero for the calibration of audiometric equipmentReference equivalent threshold sound pressure levels for pure tones and circumaural earphones
BS EN ISO 389-9:2009. Acoustics. Reference zero for the calibration of audiometric equipmentPreferred test conditions for the determination of reference hearing threshold levels
BS EN ISO 3907:2009. Hardmetals. Determination of total carbon. Gravimetric method
BS EN ISO 3908:2009. Hardmetals. Determination of insoluble (free) carbon. Gravimetric method
BS EN ISO 3915:1999. Plastics. Measurement of resistivity of conductive plastics
BS EN ISO 3923-1:2010. Metallic powders. Determination of apparent densityFunnel method
BS EN ISO 3924:2010, BS 2000-582:2010. Petroleum products. Determination of boiling range distribution. Gas chromatography method
BS EN ISO 3927:2002. Metallic powders, excluding powders for hardmetals. Determination of compressibility in uniaxial compression
BS EN ISO 3927:2011. Metallic powders, excluding powders for hardmetals. Determination of compressibility in uniaxial compression
BS EN ISO 3928:2006. Sintered metal materials, excluding hardmetals. Fatigue test pieces
BS EN ISO 3946:1994. Starches and derived products. Determination of total phosphorus content. Spectrometric method
BS EN ISO 3947:1994. Starches, native or modified. Determination of total fat content
BS EN ISO 3950:1997. Dentistry. Designation system for teeth and areas of the oral cavity
BS EN ISO 3950:2009. Dentistry. Designation system for teeth and areas of the oral cavity
BS EN ISO 3952-1:1995. Kinematic diagrams. Graphical symbolsPart 1
BS EN ISO 3952-2:1995. Kinematic diagrams. Graphical symbolsPart 2
BS EN ISO 3952-3:1995. Kinematic diagrams. Graphical symbolsPart 3
BS EN ISO 3952-4:1997. Kinematic diagrams. Graphical symbolsMiscellaneous mechanisms and their components
BS EN ISO 3953:1995. Metallic powders. Determination of tap density
BS EN ISO 3953:2011. Metallic powders. Determination of tap density
BS EN ISO 3954:2007. Powders for powder metallurgical purposes. Sampling
BS EN ISO 3960:2008. Animal and vegetable fats and oils. Determination of peroxide value. Iodometric (visual) endpoint determination
BS EN ISO 3960:2010. Animal and vegetable fats and oils. Determination of peroxide value. Iodometric (visual) endpoint determination
BS EN ISO 3961:2000. Animal and vegetable fats and oils. Determination of iodine value
BS EN ISO 3961:2011. Animal and vegetable fats and oils. Determination of iodine value
BS EN ISO 3961:2013. Animal and vegetable fats and oils. Determination of iodine value
BS EN ISO 3977-5:2003. Gas turbines. ProcurementApplications for petroleum and natural gas industries
BS EN ISO 3993:1996. Liquefied petroleum gas and light hydrocarbons. Determination of density or relative density. Pressure hydrometer method
BS EN ISO 3994:2001. Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification
BS EN ISO 3994:2011. Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification
BS EN ISO 4007:2012. Personal protective equipment. Eye and face protection. Vocabulary
BS EN ISO 4014:2001. Hexagon head bolts. Product grades A and B
BS EN ISO 4014:2011. Hexagon head bolts. Product grades A and B
BS EN ISO 4016:2001. Hexagon head bolts. Product grade C
BS EN ISO 4016:2011. Hexagon head bolts. Product grade C
BS EN ISO 4017:2001. Hexagon head screws. Product grades A and B
BS EN ISO 4017:2011. Hexagon head screws. Product grades A and B
BS EN ISO 4018:2001. Hexagon head screws. Product grade C
BS EN ISO 4018:2011. Hexagon head screws. Product grade C
BS EN ISO 4022:2006. Permeable sintered metal materials. Determination of fluid permeability
BS EN ISO 4023:1995, ISO 4023:1991. Rubber hoses for steam. Test methods
BS EN ISO 4023:2009. Rubber hoses and hose assemblies for steam. Test methods
BS EN ISO 4026:2003. Hexagon socket set screws with flat point
BS EN ISO 4027:2003. Hexagon socket set screws with cone point
BS EN ISO 4028:2003. Hexagon socket set screws with dog point
BS EN ISO 4029:2003. Hexagon socket set screws with cup point
BS EN ISO 4032:2001. Hexagon nuts, style 1. Product grades A and B
BS EN ISO 4032:2012. Hexagon regular nuts (style 1). Product grades A and B
BS EN ISO 4033:2001. Hexagon nuts, style 2. Product grades A and B
BS EN ISO 4033:2012. Hexagon high nuts (style 2). Product grades A and B
BS EN ISO 4034:2001. Hexagon nuts. Product grade C
BS EN ISO 4034:2012. Hexagon regular nuts (style 1). Product grade C
BS EN ISO 4035:2001. Hexagon thin nuts (chamfered). Product grades A and B
BS EN ISO 4035:2012. Hexagon thin nuts chamfered (style 0). Product grades A and B
BS EN ISO 4036:2001. Hexagon thin nuts (unchamfered). Product grade B
BS EN ISO 4036:2012. Hexagon thin nuts unchamfered (style 0). Product grade B
BS EN ISO 4042:2000. Fasteners. Electroplated coatings
BS EN ISO 4044:1998. Leather. Preparation of chemical test samples
BS EN ISO 4044:2008. Leather. Chemical tests. Preparation of chemical test samples
BS EN ISO 4045:1998. Leather. Determination of pH
BS EN ISO 4045:2008. Leather. Chemical tests. Determination of pH
BS EN ISO 4047:1998. Leather. Determination of sulphated total ash and sulphated water-insoluble ash
BS EN ISO 4048:1998. Leather. Determination of matter soluble in dichloromethane
BS EN ISO 4048:2008. Leather. Chemical tests. Determination of matter soluble in dichloromethane and free fatty acid content
BS EN ISO 4049:2000. Dentistry. Polymer-based filling, restorative and luting materials
BS EN ISO 4049:2009. Dentistry. Polymer-based restorative materials
BS EN ISO 4063:2000. Welding and allied processes. Nomenclature of processes and reference numbers
BS EN ISO 4063:2009. Welding and allied processes. Nomenclature of processes and reference numbers
BS EN ISO 4063:2010. Welding and allied processes. Nomenclature of processes and reference numbers
BS EN ISO 4066:2000. Construction drawings. Bar scheduling
BS EN ISO 407:2004. Small medical gas cylinders. Pin-index yoke-type valve connections
BS EN ISO 4073:2005. Dental equipment. Items of dental equipment at the working place. Identification system
BS EN ISO 4073:2009. Dentistry. Information system on the location of dental equipment in the working area of the oral health care provider
BS EN ISO 4074:2002. Natural latex rubber condoms. Requirements and test methods
BS EN ISO 4080:1995. Rubber and plastics hoses and hose assemblies. Determination of permeability to gas
BS EN ISO 4080:2009. Rubber and plastics hoses and hose assemblies. Determination of permeability to gas
BS EN ISO 4090:2004. Photography. Medical radiographic cassettes/screens/films and hard-copy imaging films. Dimensions and specifications
BS EN ISO 4098:2006. Leather. Chemical tests. Determination of water-soluble matter, water-soluble inorganic matter and water-soluble organic matter
BS EN ISO 4119:1996. Pulps. Determination of stock concentration
BS EN ISO 4120:2007. Sensory analysis. Methodology. Triangle test
BS EN ISO 4126-1:2013. Safety devices for protection against excessive pressureSafety valves
BS EN ISO 4126-2:2003. Safety devices for protection against excessive pressureBursting disc safety devices
BS EN ISO 4126-3:2006. Safety devices for protection against excessive pressureSafety valves and bursting disc safety devices in combination
BS EN ISO 4126-4:2004. Safety devices for protection against excessive pressurePilot operated safety valves
BS EN ISO 4126-4:2013. Safety devices for protection against excessive pressurePilot-operated safety valves
BS EN ISO 4126-5:2004. Safety devices for protection against excessive pressureControlled safety pressure relief systems
BS EN ISO 4126-5:2013. Safety devices for protection against excessive pressureControlled safety pressure relief systems (CSPRS)
BS EN ISO 4126-6:2003. Safety devices for protection against excessive pressureApplication, selection and installation of bursting disc safety devices
BS EN ISO 4126-7:2003. Safety devices for protection against excessive pressureCommon data
BS EN ISO 4126-7:2013. Safety devices for protection against excessive pressureCommon data
BS EN ISO 4135:1996. Anaesthesiology. Vocabulary
BS EN ISO 4135:2001. Anaesthetic and respiratory equipment. Vocabulary
BS EN ISO 4136:2011. Destructive tests on welds in metallic materials. Transverse tensile test
BS EN ISO 4136:2012. Destructive tests on welds in metallic materials. Transverse tensile test
BS EN ISO 4142:2002. Laboratory glassware. Test tubes
BS EN ISO 4157-1:1999. Construction drawings. Designation systemsBuildings and parts of buildings
BS EN ISO 4157-2:1999. Construction drawings. Designation systemsRoom names and numbers
BS EN ISO 4157-3:1999. Construction drawings. Designation systemsRoom identifiers
BS EN ISO 4165:2003. Road vehicles. Electrical connections. Double-pole connection
BS EN ISO 4167:2006. Polyolefin agricultural twines
BS EN ISO 4172:1997. Technical drawings. Construction drawings. Drawings for the assembly of prefabricated structures
BS EN ISO 4180:2010. Packaging. Complete, filled transport packages. General rules for the compilation of performance test schedules
BS EN ISO 4254-1:2005. Agricultural machinery. SafetyGeneral requirements
BS EN ISO 4254-1:2009. Agricultural machinery. SafetyGeneral requirements
BS EN ISO 4254-1:2013. Agricultural machinery. SafetyGeneral requirements
BS EN ISO 4254-10:2009. Agricultural machinery. SafetyRotary tedders and rakes
BS EN ISO 4254-11:2010. Agricultural machinery. SafetyPick-up balers
BS EN ISO 4254-12:2012. Agricultural machinery. SafetyRotary disc and drum mowers and flail mowers
BS EN ISO 4254-5:2009. Agricultural machinery. SafetyPower-driven soil-working machines
BS EN ISO 4254-6:2009. Agricultural machinery. SafetySprayers and liquid fertilizer distributors
BS EN ISO 4254-7:2009. Agricultural machinery. SafetyCombine harvesters, forage harvesters and cotton harvesters
BS EN ISO 4256:1995, BS 2000- 410:1995,ISO 4256:1978. Methods of test for petroleum and its products. Liquefied petroleum gases. Determination of vapour pressure. LPG method
BS EN ISO 4256:1998, BS 2000-410:1998. Liquid petroleum products. Determination of gauge vapour pressure. LPG method
BS EN ISO 4257:1995. Liquefied petroleum gases. Method of sampling
BS EN ISO 4257:2001, BS 2000-477:2001. Methods of test for petroleum and its products. Liquefied petroleum gases. Method of sampling
BS EN ISO 4259:1996, BS 2000-367:1996. Petroleum products. Determination and application of precision data in relation to methods of test
BS EN ISO 4259:2006, BS 2000-367:2006. Petroleum products. Determination and application of precision data in relation to methods of test
BS EN ISO 4263-1:2004. Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST testProcedure for mineral oils
BS EN ISO 4263-2:2003. Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST testProcedure for category HFC hydraulic fluids
BS EN ISO 4263-3:2006. Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST testAnhydrous procedure for synthetic hydraulic fluids
BS EN ISO 4263-3:2010. Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids using the TOST testAnhydrous procedure for synthetic hydraulic fluids
BS EN ISO 4263-4:2006. Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST testProcedure for industrial gear oils
BS EN ISO 4264:1997, BS 2000-380:1997,ISO 4264:1995. Methods of test for petroleum and its products. Petroleum products. Calculation of cetane index of middle-distillate fuels by the four-variable equation
BS EN ISO 4264:2007+A1:2013, BS 2000-380:2007. Petroleum products. Calculation of cetane index of middle-distillate fuels by the four-variable equation
BS EN ISO 4267-2:1996. Petroleum and liquid petroleum products. Calculation of oil quantitiesDynamic measurements
BS EN ISO 4287:1998+A1:2009. Geometrical product specification (GPS). Surface texture: Profile method. Terms, definitions and surface texture parameters
BS EN ISO 4288:1998. Geometric product specification (GPS). Surface texture. Profile method: Rules and procedures for the assessment of surface texture
BS EN ISO 4320:1998. Non-ionic surface active agents. Determination of cloud point index. Volumetric method
BS EN ISO 4373:2008. Hydrometry. Water level measuring devices
BS EN ISO 4375:2004. Hydrometric determinations. Cableway systems for stream gauging
BS EN ISO 439:2010. Steel and iron. Determination of total silicon content. Gravimetric method
BS EN ISO 4404-1:2006. Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluidsWater-containing fluids
BS EN ISO 4404-1:2012. Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluidsWater-containing fluids
BS EN ISO 4404-2:2003. Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluidsNon-aqueous fluids
BS EN ISO 4404-2:2010. Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluidsNon-aqueous fluids
BS EN ISO 4413:2010. Hydraulic fluid power. General rules and safety requirements for systems and their components (CD-ROM)
BS EN ISO 4414:2010. Pneumatic fluid power. General rules and safety requirements for systems and their components (CD-ROM)
BS EN ISO 445:1999. Pallets for materials handling. Vocabulary
BS EN ISO 445:2009. Pallets for materials handling. Vocabulary
BS EN ISO 445:2013. Pallets for materials handling. Vocabulary
BS EN ISO 449:2000. Ships and marine technology. Magnetic compasses, binnacles and azimuth reading devices. Class A
BS EN ISO 4490:2002. Metallic powders. Determination of flow time by means of a calibrated funnel (Hall flowmeter)
BS EN ISO 4490:2008. Metallic powders. Determination of flow time by means of a calibrated funnel (Hall flowmeter)
BS EN ISO 4491-2:1999. Metallic powders. Determination of oxygen content by reduction methodsLoss of mass on hydrogen reduction (hydrogen loss)
BS EN ISO 4491-3:2006. Metallic powders. Determination of oxygen content by reduction methodsHydrogen-reducible oxygen
BS EN ISO 4491-4:2013. Metallic powders. Determination of oxygen content by reduction methodsTotal oxygen by reduction-extraction
BS EN ISO 4492:2013. Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
BS EN ISO 4498:2007. Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness
BS EN ISO 4498:2010. Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness
BS EN ISO 4499-1:2010. Hardmetals. Metallographic determination of microstructurePhotomicrographs and description
BS EN ISO 4499-2:2010. Hardmetals. Metallographic determination of microstructureMeasurement of WC grain size
BS EN ISO 4507:2007. Sintered ferrous materials, carburized or carbonitrided. Determination and verification of case-hardening depth by a micro-hardness test
BS EN ISO 4516:2002. Metallic and other inorganic coatings. Vickers and Knoop microhardness tests
BS EN ISO 4518:1995. Metallic coatings. Measurement of coating thickness. Profilometric method
BS EN ISO 4521:2008. Metallic and other inorganic coatings. Electrodeposited silver and silver alloy coatings for engineering purposes. Specification and test methods
BS EN ISO 4524-3:1995. Metallic coatings. Test methods for electrodeposited gold and gold alloy coatingsElectrographic tests for porosity
BS EN ISO 4524-6:1995. Metallic coatings. Test methods for electrodeposited gold and gold alloy coatingsDetermination of the presence of residual salts
BS EN ISO 4526:2004. Metallic coatings. Electroplated coatings of nickel for engineering purposes
BS EN ISO 4527:2003. Metallic coatings. Autocatalytic (electroless) nickel-phosphorus alloy coatings. Specification and test methods
BS EN ISO 4528:2009. Vitreous and porcelain enamel finishes. Selection of test methods for vitreous and porcelain enamelled areas of articles
BS EN ISO 4534:2010. Vitreous and porcelain enamels. Determination of fluidity behaviour. Fusion flow test
BS EN ISO 4535:2000, BS 1344-19:2000. Vitreous and porcelain enamels. Apparatus for determination of resistance to hot detergent solutions used for washing textiles
BS EN ISO 4536:1995. Metallic and non-organic coatings on metallic substrates. Saline droplets corrosion test (SD test)
BS EN ISO 4538:1995. Metallic coatings. Thioacetamide corrosion test (TAA test)
BS EN ISO 4540:1995. Metallic coatings. Coatings cathodic to the substrate. Rating of electroplated test specimens subjected to corrosion tests
BS EN ISO 4541:1995. Metallic and other non-organic coatings. Corrodkote test (CORR test)
BS EN ISO 4543:1995. Metallic and other non-organic coatings. General rules for corrosion tests applicable for storage conditions
BS EN ISO 4545-1:2005. Metallic materials. Knoop hardness testTest method
BS EN ISO 4545-2:2005. Metallic materials. Knoop hardness testVerification and calibration of testing machines
BS EN ISO 4545-3:2005. Metallic materials. Knoop hardness testCalibration of reference blocks
BS EN ISO 4545-4:2005. Metallic materials. Knoop hardness testTables of hardness values
BS EN ISO 4566:1995. Small craft with inboard engine. Propeller shaft ends and bosses with 1:10 taper
BS EN ISO 4577:1999. Plastics. Polypropylene and propylene-copolymers. Determination of thermal oxidative stability in air. Oven method
BS EN ISO 4583:1998, BS 2782-4:Method 433B:1998. Plastics. Epoxy resins and related materials. Determination of easily saponifiable chlorine
BS EN ISO 4589-1:2000. Plastics. Determination of burning behaviour by oxygen indexGuidance
BS EN ISO 4589-2:1999. Plastics. Determination of burning behaviour by oxygen indexAmbient-temperature test
BS EN ISO 4589-3:1996. Plastics. Determination of burning behaviour by oxygen indexElevated temperature test
BS EN ISO 4590:1995. Cellular plastics. Determination of volume percentage of open and closed cells of rigid materials
BS EN ISO 4590:2003. Rigid cellular plastics. Determination of the volume percentage of open cells and of closed cells
BS EN ISO 4597-1:1998. Plastics. Hardeners and accelerators for epoxide resinsDesignation
BS EN ISO 4597-1:2008. Plastics. Hardeners and accelerators for epoxy resinsDesignation
BS EN ISO 4599:1997, BS 2782-8:Method 832A:1991. Plastics. Determination of resistance to environmental stress cracking (ESC). Bent strip method
BS EN ISO 4600:1998. Plastics. Determination of environmental stress cracking (ESC). Ball or pin impression method
BS EN ISO 4608:1998, BS 2782-4:Method 454E:1998. Plastics. Homopolymer and copolymer resins of vinyl chloride for general use. Determination of plasticizer absorption at room temperature
BS EN ISO 4610:1997, BS 2782-4:Method 454F:1997. Plastics. Vinyl chloride homopolymer and copolymer resins. Sieve analysis using air-jet sieve apparatus
BS EN ISO 4610:2001. Plastics. Vinyl chloride homopolymer and copolymer resins. Sieve analysis using air-jet sieve apparatus
BS EN ISO 4611:2001. Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist
BS EN ISO 4611:2008. Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist
BS EN ISO 4611:2010. Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist
BS EN ISO 4612:1999. Plastics. Preparation of PVC pastes for test purposes. Planetary-mixer method
BS EN ISO 4613-1:1999. Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materialsDesignation and specification
BS EN ISO 4613-2:1995. Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 4614:2000. Plastics. Melamine-formaldehyde mouldings. Determination of extractable formaldehyde
BS EN ISO 4615:1999. Plastics. Unsaturated polyesters and epoxide resins. Determination of total chlorine content
BS EN ISO 4617:2000. Paints and varnishes. List of equivalent terms
BS EN ISO 4618:2006. Paints and varnishes. Terms and definitions
BS EN ISO 4618-2:2000. Paints and varnishes. Terms and definitions for coating materialsSpecial terms relating to paint characteristics and properties
BS EN ISO 4618-3:2000. Paints and varnishes. Terms and definitions for coating materialsSurface preparation and methods of application
BS EN ISO 4619:2010. Driers for paints and varnishes
BS EN ISO 4622:1995, BS 3900-C7:1993. Paints and varnishes. Pressure test for stackability
BS EN ISO 4623:1995, BS 3900-F13:1986. Paints and varnishes. Filiform corrosion test on steel
BS EN ISO 4623-1:2002, BS 3900-F13:2002. Paints and varnishes. Determination of resistance to filiform corrosionSteel substrates
BS EN ISO 4623-2:2004, BS 3900-F20:2004. Paints and varnishes. Determination of resistance to filiform corrosionAluminium substrates
BS EN ISO 4624:2003, BS 3900-E10:2003. Paints and varnishes. Pull-off test for adhesion
BS EN ISO 4625-1:2006. Binders for paint and varnishes. Determination of softening pointRing-and-ball method
BS EN ISO 4625-2:2006. Binders for paint and varnishes. Determination of softening pointCup-and-ball method
BS EN ISO 4628-1:2003, BS 3900-H1:2003. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearanceGeneral introduction and designation system
BS EN ISO 4628-10:2003, BS 3900-H10:2003. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearanceAssessment of degree of filiform corrosion
BS EN ISO 4628-2:2003, BS 3900-H2:2003. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearanceAssessment of degree of blistering
BS EN ISO 4628-3:2003, BS 3900-H3:2003. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearanceAssessment of degree of rusting
BS EN ISO 4628-4:2003, BS 3900-H4:2003. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearanceAssessment of degree of cracking
BS EN ISO 4628-5:2003, BS 3900-H5:2003. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearanceAssessment of degree of flaking
BS EN ISO 4628-6:2001, BS 3900-H6:1991. Paints and varnishes. Evaluation of degradation of paint coatings. Designation of intensity, quantity and size of common types of defectRating of degree of chalking by tape method
BS EN ISO 4628-6:2007, BS 3900-H6:2007. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearanceAssessment of degree of chalking by tape method
BS EN ISO 4628-6:2011. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearanceAssessment of degree of chalking by tape method
BS EN ISO 4628-7:2003, BS 3900-H7:2003. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearanceAssessment of degree of chalking by velvet method
BS EN ISO 4628-8:2005, BS 3900-H8:2005. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearanceAssessment of degree of delamination and corrosion around a scribe
BS EN ISO 4628-8:2012. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearanceAssessment of degree of delamination and corrosion around a scribe or other artificial defect
BS EN ISO 4629:1998, BS 6782-4:1996. Binders for paints and varnishes. Determination of hydroxyl value. Titrimetric method
BS EN ISO 463:2006. Geometrical product specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of mechanical dial gauges
BS EN ISO 4630-1:2004, BS 6782-5.1:2004. Clear liquids. Estimation of colour by the Gardner colour scaleVisual method
BS EN ISO 4630-2:2004, BS 6782-5.2:2004. Clear liquids. Estimation of colour by the Gardner colour scaleSpectrophotometric method
BS EN ISO 4638:1995. Polymeric materials, cellular flexible. Determination of air flow permeability
BS EN ISO 4641:2008. Rubber hoses and hose assemblies for water suction and discharge. Specification
BS EN ISO 4641:2011. Rubber hoses and hose assemblies for water suction and discharge. Specification
BS EN ISO 4651:1995+A1:2008. Cellular rubbers and plastics. Determination of dynamic cushioning performance
BS EN ISO 4671:2001. Rubber and plastics hoses and hose assemblies. Methods of measurement of dimensions
BS EN ISO 4671:2007+A1:2011. Rubber and plastics hoses and hose assemblies. Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
BS EN ISO 4672:1999. Rubber and plastics hoses. Sub-ambient temperature flexibility tests
BS EN ISO 4674-1:2003. Rubber- or plastics-coated fabrics. Determination of tear resistance.Constant rate of tear methods
BS EN ISO 4674-2:1998. Rubber- or plastics-coated fabrics. Determination of tear resistance.Ballistic pendulum method
BS EN ISO 4684:2005. Leather. Chemical tests. Determination of volatile matter
BS EN ISO 472:2001. Plastics. Vocabulary
BS EN ISO 472:2013. Plastics. Vocabulary
BS EN ISO 4753:2000. Fasteners. Ends of parts with external ISO metric screw thread
BS EN ISO 4753:2011. Fasteners. Ends of parts with external ISO metric thread
BS EN ISO 4757:1995. Cross recesses for screws
BS EN ISO 4759-1:2001. Tolerances for fastenersBolts, screws, studs and nuts. Product grades A, B and C
BS EN ISO 4759-3:2000. Tolerances for fastenersPlain washers for bolts, screws and nuts. Product grades A and C
BS EN ISO 4762:1998. Hexagon socket head cap screws
BS EN ISO 4762:2004. Hexagon socket head cap screws
BS EN ISO 4766:2011. Slotted set screws with flat point
BS EN ISO 4787:2010. Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
BS EN ISO 4787:2011. Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
BS EN ISO 4788:2005. Laboratory glassware. Graduated measuring cylinders
BS EN ISO 4796-1:2001. Laboratory glassware. BottlesScrew-neck bottles
BS EN ISO 4796-2:2001. Laboratory glassware. BottlesConical neck bottles
BS EN ISO 4796-3:2001. Laboratory glassware. BottlesAspirator bottles
BS EN ISO 4797:2004. Laboratory glassware. Boiling flasks with conical ground joints
BS EN ISO 4823:2000+A1:2007. Dentistry. Elastomeric impression materials
BS EN ISO 4824:1997. Dentistry. Ceramic denture teeth
BS EN ISO 483:1999. Plastics. Small enclosures for conditioning and testing using aqueous solutions to maintain relative humidity at constant value
BS EN ISO 483:2005. Plastics. Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at constant value
BS EN ISO 4833:2003. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of microorganisms. Colony-count technique at 30°C
BS EN ISO 4833-1:2013. Microbiology of the food chain. Horizontal method for the enumeration of microorganismsColony count at 30 degrees C by the pour plate technique
BS EN ISO 4833-2:2013. Microbiology of food and animal feed. Horizontal method for the enumeration of microorganismsColony count at 30 degrees C by the surface plating technique
BS EN ISO 4869-2:1995. Acoustics. Hearing protectorsEstimation of effective A-weighted sound pressure levels when hearing protectors are worn
BS EN ISO 4869-3:2007. Acoustics. Hearing protectorsMeasurement of insertion loss of ear-muff type protectors using an acoustic test fixture
BS EN ISO 4869-4:2000. Acoustics. Hearing protectorsMeasurement of effective sound pressure levels for level-dependent sound-restoration ear muffs
BS EN ISO 4871:1997. Acoustics. Declaration and verification of noise emission values of machinery and equipment
BS EN ISO 4871:2009. Acoustics. Declaration and verification of noise emission values of machinery and equipment
BS EN ISO 489:1999, BS 2782-5:Method 531A:1999. Plastics. Determination of refractive index
BS EN ISO 4892-1:2001. Plastics. Methods of exposure to laboratory light sourcesGeneral guidance
BS EN ISO 4892-2:2000. Plastics. Methods of exposure to laboratory light sourcesXenon-arc sources
BS EN ISO 4892-2:2006+A1:2009. Plastics. Methods of exposure to laboratory light sourcesXenon-arc lamps
BS EN ISO 4892-2:2013. Plastics. Methods of exposure to laboratory light sourcesXenon-arc lamps
BS EN ISO 4892-3:2000. Plastics. Methods of exposure to laboratory light sourcesFluorescent UV lamps
BS EN ISO 4892-3:2006. Plastics. Methods of exposure to laboratory light sourcesFluorescent UV lamps
BS EN ISO 4892-3:2013. Plastics. Methods of exposure to laboratory light sourcesFluorescent UV lamps
BS EN ISO 4894-1:1999. Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 4894-2:1999. Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 4895:2000. Plastics. Liquid epoxy resins. Determination of tendency to crystallize
BS EN ISO 4920:2012. Textile fabrics. Determination of resistance to surface wetting (spray test)
BS EN ISO 4921:2002. Knitting. Basic concepts. Vocabulary
BS EN ISO 4934:2003. Steel and iron. Determination of sulfur content. Gravimetric method
BS EN ISO 4945:2009. Steel. Determination of nitrogen content. Spectrophotometric method
BS EN ISO 4957:2000. Tool steels
BS EN ISO 50001:2011 (A5 Laminated), BIP 2232:2013. BS EN ISO 50001:2011 (A5 Laminated). Energy management systems. Requirements with guidance for use
BS EN ISO 50001:2011. Energy management systems. Requirements with guidance for use
BS EN ISO 505:2000. Conveyor belts. Method for the determination of the tear propagation resistance of textile conveyor belts
BS EN ISO 5077:2008. Textiles. Determination of dimensional change in washing and drying
BS EN ISO 5079:1996. Textiles. Fibres. Determination of breaking force and elongation at break of individual fibres
BS EN ISO 5080:1999. Sisal agricultural twines
BS EN ISO 5084:1997. Textiles. Determination of thickness of textiles and textile products
BS EN ISO 5135:1999. Acoustics. Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
BS EN ISO 5136:2003, BS 848-2.5:2003. Acoustics. Determination of sound power radiated into a duct by fans and other air-moving devices. In-duct method
BS EN ISO 5136:2009. Acoustics. Determination of sound power radiated into a duct by fans and other air-moving devices. In-duct method
BS EN ISO 5155:1996. Household refrigerating appliances. Frozen food storage cabinets and food freezers. Characteristics and test methods
BS EN ISO 5163:2005, BS 2000-236:2005. Petroleum products. Determination of knock characteristics of motor and aviation fuels. Motor method
BS EN ISO 5164:2005, BS 2000-237:2005. Petroleum products. Determination of knock characteristics of motor fuels. Research method
BS EN ISO 5165:1998, BS 2000-41:1998,ISO 5165:1998. Petroleum products. Determination of the ignition quality of diesel fuels. Cetane engine method
BS EN ISO 5167-1:1997. Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running fullOrifice plates, nozzles, and venturi tubes inserted in circular cross-section conduits running full
BS EN ISO 5167-1:2003. Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running fullGeneral principles and requirements
BS EN ISO 5167-2:2003. Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running fullOrifice plates
BS EN ISO 5167-3:2003. Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running fullNozzles and Venturi nozzles
BS EN ISO 5167-4:2003. Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running fullVenturi tubes
BS EN ISO 5171:2010. Gas welding equipment. Pressure gauges used in welding, cutting and allied processes
BS EN ISO 5172:1997. Manual blowpipes for welding, cutting and heating. Specification and tests
BS EN ISO 5172:2006+A1:2012. Gas welding equipment. Blowpipes for gas welding, heating and cutting. Specifications and tests
BS EN ISO 5173:2010+A1:2011. Destructive tests on welds in metallic materials. Bend tests
BS EN ISO 5178:2011. Destructive tests on welds in metallic materials. Longitudinal tensile test on weld metal in fusion welded joints
BS EN ISO 5182:2009. Resistance welding. Materials for electrodes and ancillary equipment
BS EN ISO 5183-1:2001. Resistance welding equipment. Electrode adaptors, male taper 1:10Conical fixing, taper 1:10
BS EN ISO 5183-2:2001. Resistance welding equipment. Electrode adaptors, male taper 1:10Parallel shank fixing for end-thrust electrodes
BS EN ISO 5198:1999. Centrifugal, mixed flow and axial pumps. Code for hydraulic performance tests. Precision class
BS EN ISO 5199:2002. Technical specifications for centrifugal pumps. Class II
BS EN ISO 520:2010. Cereals and pulses. Determination of the mass of 1000 grains
BS EN ISO 5210:1996. Industrial valves. Multi-turn valve actuator attachments
BS EN ISO 5211:2001. Industrial valves. Part-turn actuator attachments
BS EN ISO 5261:1999. Technical drawings. Simplified representation of bars and profile sections
BS EN ISO 5263:1997. Pulps. Laboratory wet disintegration
BS EN ISO 5263-1:2004. Pulps. Laboratory wet disintegrationDisintegration of chemical pulps
BS EN ISO 5263-2:2004. Pulps. Laboratory wet disintegrationDisintegration of mechanical pulps at 20°C
BS EN ISO 5263-3:2004. Pulps. Laboratory wet disintegrationDisintegration of mechanical pulps at greater than or equal to 85 °C
BS EN ISO 5264-2:2002. Pulps. Laboratory beatingPFI mill method
BS EN ISO 5264-2:2011. Pulps. Laboratory beatingPFI mill method
BS EN ISO 5267-1:2001. Pulps. Determination of drainabilitySchopper-Riegler method
BS EN ISO 5269-1:2001. Pulps. Preparation of laboratory sheets for physical testingConventional sheet-former method
BS EN ISO 5269-1:2005. Pulps. Preparation of laboratory sheets for physical testingConventional sheet-former method
BS EN ISO 5269-2:2001. Pulps. Preparation of laboratory sheets for physical testingRapid-Kothen method
BS EN ISO 5269-2:2004. Pulps. Preparation of laboratory sheets for physical testingRapid-Koethen method
BS EN ISO 5270:2000. Pulps. Laboratory sheets. Determination of physical properties
BS EN ISO 5270:2012. Pulps. Laboratory sheets. Determination of physical properties
BS EN ISO 527-1:1996, BS 2782-3:Method 321:1994,ISO 527-1:1993. Plastics. Determination of tensile propertiesGeneral principles
BS EN ISO 527-1:2012. Plastics. Determination of tensile propertiesGeneral principles
BS EN ISO 527-2:1996, BS 2782-3:Method 322:1994. Plastics. Determination of tensile propertiesTest conditions for moulding and extrusion plastics
BS EN ISO 527-2:2012. Plastics. Determination of tensile propertiesTest conditions for moulding and extrusion plastics
BS EN ISO 527-3:1996, BS 2782-3:Method 326E:1995. Plastics. Determination of tensile propertiesTest conditions for films and sheets
BS EN ISO 527-4:1997, BS 2782-3:Method 326F:1997. Plastics. Determination of tensile propertiesTest conditions for isotropic and orthotropic fibre-reinforced plastic composites
BS EN ISO 527-5:1997, BS 2782-3:Method 326G:1997. Plastics. Determination of tensile propertiesTest conditions for unidirectional fibre-reinforced plastic composites
BS EN ISO 527-5:2009. Plastics. Determination of tensile propertiesTest conditions for unidirectional fibre-reinforced plastic composites
BS EN ISO 534:2005. Paper and board. Determination of thickness, density and specific volume
BS EN ISO 534:2011. Paper and board. Determination of thickness, density and specific volume
BS EN ISO 5349-1:2001. Mechanical vibration. Measurement and evaluation of human exposure to hand-transmitted vibrationGeneral requirements
BS EN ISO 5349-2:2002. Mechanical vibration. Measurement and assessment of human exposure to hand-transmitted vibrationPractical guidance for measurement at the workplace.
BS EN ISO 5350-1:1998
BS EN ISO 5350-1:1998 . Pulps. Estimation of dirt and shivesInspection of laboratory sheets
BS EN ISO 5350-1:1998. Pulps. Estimation of dirt and shives.Inspection of laboratory sheets
BS EN ISO 5350-1:2006. Pulps. Estimation of dirt and shivesInspection of laboratory sheets by transmitted light
BS EN ISO 5350-2:1998 (text)
BS EN ISO 5350-2:1998. Pulps. Estimation of dirt and shives.Inspection of mill sheeted pulp
BS EN ISO 5350-2:2006. Pulps. Estimation of dirt and shivesInspection of mill sheeted pulp by transmitted light
BS EN ISO 5353:1999, BS 6912-27:1998. Earth-moving machinery, and tractors and machinery for agriculture and forestry. Seat index point
BS EN ISO 5356-1:2004. Anaesthetic and respiratory equipment. Conical connectorsCones and sockets
BS EN ISO 5356-2:2007. Anaesthetic and respiratory equipment. Conical connectorsScrew-threaded weight-bearing connectors
BS EN ISO 5356-2:2012. Anaesthetic and respiratory equipment. Conical connectorsScrew-threaded weight-bearing connectors
BS EN ISO 5359:2008+A1:2011. Low-pressure hose assemblies for use with medical gases
BS EN ISO 536:1997. Paper and board. Determination of grammage
BS EN ISO 536:2012. Paper and board. Determination of grammage
BS EN ISO 5360:2007. Anaesthetic vaporizers. Agent-specific filling systems
BS EN ISO 5360:2009. Anaesthetic vaporizers. Agent-specific filling systems
BS EN ISO 5360:2012. Anaesthetic vaporizers. Agent-specific filling systems
BS EN ISO 5361:2012. Anaesthetic and respiratory equipment. Tracheal tubes and connectors
BS EN ISO 5364:2011. Anaesthetic and respiratory equipment. Oropharyngeal airways
BS EN ISO 5366-1:2004. Anaesthetic and respiratory equipment. Tracheostomy tubesTubes and connectors for use in adults
BS EN ISO 5366-1:2009. Anaesthetic and respiratory equipment. Tracheostomy tubesTubes and connectors for use in adults
BS EN ISO 5377:1994. Starch hydrolysis products. Determination of reducing power and dextrose equivalent. Lane and Eynon constant titre method
BS EN ISO 5378:1994. Starches and derived products. Determination of nitrogen content by the Kjeldahl method. Spectrometric method
BS EN ISO 5381:1994. Starch hydrolysis products. Determination of water content. Modified Karl Fischer method
BS EN ISO 5395-1:2013. Garden equipment. Safety requirements for combustion-engine-powered lawnmowersTerminology and common tests
BS EN ISO 5395-2:2013. Garden equipment. Safety requirements for combustion-engine-powered lawnmowersPedestrian-controlled lawnmowers
BS EN ISO 5395-3:2013. Garden equipment. Safety requirements for combustion-engine-powered lawnmowersRide-on lawnmowers with seated operator
BS EN ISO 5398-1:2007. Leather. Chemical determination of chromic oxide contentQuantification by titration
BS EN ISO 5398-2:2009. Leather. Chemical determination of chromic oxide contentQuantification by colorimetric determination
BS EN ISO 5398-3:2007. Leather. Chemical determination of chromic oxide contentQuantification by atomic absorption spectrometry
BS EN ISO 5398-4:2007. Leather. Chemical determination of chromic oxide contentQuantification by inductive coupled plasma-optical emission spectrometer (ICP-OES)
BS EN ISO 5399:1998. Leather. Determination of water-soluble magnesium salts. EDTA titrimetric method
BS EN ISO 5402:2002. Leather. Physical and mechanical tests. Determination of flex resistance by flexometer method
BS EN ISO 5402-1:2011. Leather. Determination of flex resistanceFlexometer method
BS EN ISO 5403:2002. Leather. Physical and mechanical tests. Determination of water resistance of flexible leather
BS EN ISO 5403-1:2011. Leather. Determination of water resistance of flexible leatherRepeated linear compression (penetrometer)
BS EN ISO 5403-2:2011. Leather. Determination of water resistance of flexible leatherRepeated angular compression (Maeser)
BS EN ISO 5404:2002. Leather. Physical and mechanical tests. Determination of the water resistance of heavy leathers
BS EN ISO 5404:2011. Leather. Physical test methods. Determination of water resistance of heavy leathers
BS EN ISO 542:1995. Oilseeds. Sampling
BS EN ISO 5436-1:2001. Geometrical Product Specifications (GPS). Surface texture: Profile method; Measurement standardsGeometric product specifications (GPS). Surface texture. Profile method calibration. Measurement standards
BS EN ISO 5436-2:2001. Geometrical product specifications (GPS). Surface texture. Profile method. Measurement standardsSoftware measurement standards
BS EN ISO 5436-2:2012. Geometrical product specifications (GPS). Surface texture: Profile method; Measurement standardsSoftware measurement standards
BS EN ISO 544:2003. Welding consumables. Technical delivery conditions for welding filler metals. Type of product, dimensions, tolerances and markings
BS EN ISO 544:2011. Welding consumables. Technical delivery conditions for filler materials and fluxes. Type of product, dimensions, tolerances and markings
BS EN ISO 5455:1995, BS 308-1.4:1995. Technical drawings. Scales
BS EN ISO 5456-1:1999. Technical drawings. Projection methodsSynopsis
BS EN ISO 5456-2:1999. Technical drawings. Projection methodsOrthographic representations
BS EN ISO 5456-3:1999. Technical drawings. Projection methodsAxonometric representations
BS EN ISO 5457:1999+A1:2010. Technical product documentation. Sizes and layout of drawing sheets
BS EN ISO 5458:1999. Geometrical product specifications (GPS). Geometrical tolerancing. Positional tolerancing
BS EN ISO 5459:2011. Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
BS EN ISO 5470-1:1999. Rubber- or plastics-coated fabrics. Determination of abrasion resistanceTaber abrader
BS EN ISO 5470-2:2003. Rubber- or plastics-coated fabrics. Determination of abrasion resistanceMartindale abrader
BS EN ISO 5492:2009. Sensory analysis. Vocabulary
BS EN ISO 5495:2007. Sensory analysis. Methodology. Paired comparison test
BS EN ISO 5508:1995, BS 684-2.35:1990. Animal and vegetable fats and oils. Analysis by gas chromatography of methyl esters of fatty acids
BS EN ISO 5509:2001, BS 684-2.34:2001. Animal and vegetable fats and oils. Preparation of methyl esters of fatty acids
BS EN ISO 5511:1997. Oilseeds. Determination of oil content. Method using continuous-wave low-resolution nuclear magnetic resonance spectrometry (Rapid method)
BS EN ISO 5526:2013. Cereals, pulses and other food grains. Nomenclature
BS EN ISO 5529:2010. Wheat. Determination of the sedimentation index. Zeleny test
BS EN ISO 5534:2004. Cheese and processed cheese. Determination of the total solids content (Reference method)
BS EN ISO 5537:2004. Dried milk. Determination of moisture content (reference method)
BS EN ISO 5555:1995. Animal and vegetable fats and oils. Sampling
BS EN ISO 5555:2002. Animal and vegetable fats and oils. Sampling
BS EN ISO 5620-1:1997. Shipbuilding and marine structures. Filling connection for drinking water tanks.General requirements
BS EN ISO 5620-2:1997. Shipbuilding and marine structures. Filling connection for drinking water tanks.Components
BS EN ISO 5659-1:1999. Plastics. Smoke generationGuidance on optical-density testing
BS EN ISO 5659-2:1999. Plastics. Smoke generationDetermination of optical density by a single chamber test
BS EN ISO 5659-2:2006. Plastics. Smoke generationDetermination of optical density by a single-chamber test
BS EN ISO 5659-2:2012. Plastics. Smoke generationDetermination of optical density by a single-chamber test
BS EN ISO 5667-1:2006, BS 6068-6.1:2006. Water quality. SamplingGuidance on the design of sampling programmes and sampling techniques
BS EN ISO 5667-13:1998, BS 6068-6.13:1998. Water quality. SamplingGuidance on sampling of sludges from sewage and water treatment works
BS EN ISO 5667-13:2011. Water quality. SamplingGuidance on sampling of sludges
BS EN ISO 5667-15:2009. Water quality. SamplingGuidance on the preservation and handling of sludge and sediment samples
BS EN ISO 5667-16:1998, BS 6068-6.16:1998. Water quality. SamplingGuidance on biotesting of samples
BS EN ISO 5667-19:2004, BS 6068-6.19:2004. Water quality. SamplingGuidance on sampling in marine sediments
BS EN ISO 5667-23:2011. Water quality. SamplingGuidance on passive sampling in surface waters
BS EN ISO 5667-3:1996, BS 6068-6.3:1996. Water quality. SamplingGuidance on the preservation and handling of samples
BS EN ISO 5667-3:2003, BS 6068-6.3:2003. Water quality. SamplingGuidance on the preservation and handling of water samples
BS EN ISO 5667-3:2012. Water quality. SamplingPreservation and handling of water samples
BS EN ISO 5674:2004. Tractors and machinery for agriculture and forestry. Guards for power take-off (PTO) drive-shafts. Strength and wear tests and acceptance criteria
BS EN ISO 5674:2006. Tractors and machinery for agriculture and forestry. Guards for power take-off (PTO) drive-shafts. Strength and wear tests and acceptance criteria
BS EN ISO 5674:2009. Tractors and machinery for agriculture and forestry. Guards for power take-off (PTO) drive-shafts. Strength and wear tests and acceptance criteria
BS EN ISO 5755:2012. Sintered metal materials. Specifications
BS EN ISO 5764:2002. Milk. Determination of freezing point. Thermistor cryoscope method (Reference method)
BS EN ISO 5764:2009. Milk. Determination of freezing point. Thermistor cryoscope method (Reference method)
BS EN ISO 5771:1996. Rubber hose and hose assemblies for transferring anhydrous ammonia. Specification
BS EN ISO 5771:2008. Rubber hoses and hose assemblies for transferring anhydrous ammonia. Specification
BS EN ISO 5774:2001. Plastics hoses, textile-reinforced, for compressed air. Specification
BS EN ISO 5774:2008. Plastic hoses. Textile-reinforced types for compressed-air applications. Specification
BS EN ISO 5778:2000. Ships and marine technology. Small weathertight steel hatches
BS EN ISO 580:2005. Plastics piping and ducting systems. Injection-moulded thermoplastics fittings. Methods for visually assessing the effects of heating
BS EN ISO 5801:2008, BS 848-1:2007. Industrial fans. Performance testing using standardized airways
BS EN ISO 5802:2008, BS 848-3:2001. Fans for general purposePerformance testing in situ
BS EN ISO 5809:1994. Starches and derived products. Determination of sulfated ash
BS EN ISO 5810:1994, ISO 5810:1982. Starches and derived products. Determination of chloride content. Potentiometric method
BS EN ISO 5814:2012. Water quality. Determination of dissolved oxygen. Electrochemical probe method
BS EN ISO 5817:2003. Welding. Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded). Quality levels for imperfections
BS EN ISO 5817:2007. Welding. Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded). Quality levels for imperfections
BS EN ISO 5821:2009. Resistance welding. Spot welding electrode caps
BS EN ISO 5826:2003. Resistance welding equipment. Transformers. General specifications applicable to all transformers
BS EN ISO 5828:1997. Resistance welding equipment. Secondary connecting cables with terminals connected to water-cooled lugs. Dimensions and characteristics
BS EN ISO 5828:2001. Resistance welding equipment. Secondary connecting cables with terminals connected to water-cooled lugs. Dimensions and characteristics
BS EN ISO 583:2007. Conveyor belts with a textile carcass. Total belt thickness and thickness of constitutive elements. Test methods
BS EN ISO 583-1:2000. Conveyor belts with a textile carcass. Total thickness and thickness of elementsMethods of test
BS EN ISO 5832-2:2012. Implants for surgery. Metallic materialsUnalloyed titanium
BS EN ISO 5832-3:2012, ISO 5832-3:1996. Implants for surgery. Metallic materialsWrought titanium 6-aluminium 4-vanadium alloy
BS EN ISO 584:1998. Plastics. Unsaturated polyester resins. Determination of reactivity at 80 °C (conventional method)
BS EN ISO 5840:2005. Cardiovascular implants. Cardiac valve prostheses
BS EN ISO 5840:2009. Cardiovascular implants. Cardiac valve prostheses
BS EN ISO 5840-3:2013. Cardiovascular implants. Cardiac valve prosthesesHeart valve substitutes implanted by transcatheter techniques
BS EN ISO 5845-1:1999. Technical drawings. Simplified representation of the assemby of parts with fastenersGeneral principles
BS EN ISO 585:1999. Plastics. Unplasticized cellulose acetate. Determination of moisture content
BS EN ISO 591-1:2000. Titanium dioxide pigments for paintsSpecifications and methods of test
BS EN ISO 5912:2005. Camping tents
BS EN ISO 5912:2011. Camping tents
BS EN ISO 5923:2012. Equipment for fire protection and fire fighting. Fire extinguishing media. Carbon dioxide
BS EN ISO 5943:2006 (EDTN 1). Cheese and processed cheese products. Determination of chloride content. Potentiometric titration method
BS EN ISO 5943:2006. Cheese and processed cheese products. Determination of chloride content. Potentiometric titration method
BS EN ISO 595-2:1995. Reusable all-glass or metal-and-glass syringes for medical useDesign, performance requirements and tests
BS EN ISO 5961:1995, BS 6068-2.21:1995. Water quality. Determination of cadmium by atomic absorption spectrometry
BS EN ISO 5981:1997. Rubber- or plastics-coated fabrics. Determination of resistance to combined shear flexing and rubbing
BS EN ISO 5981:2007. Rubber or plastics-coated fabrics. Determination of resistance to combined shear flexing and rubbing
BS EN ISO 5983-1:2005. Animal feeding stuffs. Determination of nitrogen content and calculation of crude protein contentKjeldahl method
BS EN ISO 5983-2:2005. Animal feeding stuffs. Determination of nitrogen content and calculation of crude protein contentBlock digestion/steam distillation method
BS EN ISO 5983-2:2009. Animal feeding stuffs. Determination of nitrogen content and calculation of crude protein contentBlock digestion and steam distillation method
BS EN ISO 5999:2004. Polymeric materials, cellular flexible. Polyurethane foam for load-bearing applications excluding carpet underlay. Specification
BS EN ISO 5999:2007. Flexible cellular polymeric materials. Polyurethane foam for load-bearing applications excluding carpet underlay. Specification
BS EN ISO 5999:2013. Flexible cellular polymeric materials. Polyurethane foam for load-bearing applications excluding carpet underlay. Specification
BS EN ISO 60:2000. Plastics. Determination of apparent density of material that can be poured from a specified funnel
BS EN ISO 6009:1994. Hypodermic needles for single use. Colour coding for identification
BS EN ISO 604:1997, BS 2782-3:Method 345A:1993. Plastics. Determination of compressive properties
BS EN ISO 604:2003. Plastics. Determination of compressive properties
BS EN ISO 6042:2000. Ships and marine technology. Weathertight single-leaf steel doors
BS EN ISO 61:2000. Plastics. Determination of apparent density of moulding material that cannot be poured from a specified funnel
BS EN ISO 6103:1999. Bonded abrasive products. Permissible unbalances of grinding wheels as delivered. Testing
BS EN ISO 6103:2005. Bonded abrasive products. Permissible unbalances of grinding wheels as delivered. Static testing
BS EN ISO 6115:1997. Shipbuilding. Trawl winches
BS EN ISO 613:2001. Ships and marine technology. Magnetic compasses, binnacles and azimuth reading devices. Class B
BS EN ISO 6134:2005. Rubber hoses and hose assemblies for saturated steam. Specification
BS EN ISO 6141:2006, ISO 6141:2000. Gas analysis. Requirements for certificates for calibration gases and gas mixtures
BS EN ISO 6142:2006. Gas analysis. Preparation of calibration gas mixtures. Gravimetric method
BS EN ISO 6143:2006. Gas analysis. Comparison methods for determining and checking the composition of calibration gas mixtures
BS EN ISO 6144:2006. Gas analysis. Preparation of calibration gas mixtures. Static volumetric method
BS EN ISO 6145-1:2008. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methodsMethods of calibration
BS EN ISO 6145-10:2008. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methodsPermeation method
BS EN ISO 6145-11:2008. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methodsElectrochemical generation
BS EN ISO 6145-4:2008. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methodsContinuous syringe injection method
BS EN ISO 6145-5:2010. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methodsCapillary calibration devices
BS EN ISO 6145-6:2008. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methodsCritical orifices
BS EN ISO 6145-7:2010. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methodsThermal mass-flow controllers
BS EN ISO 6145-8:2008. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methodsDiffusion method
BS EN ISO 6145-9:2010. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methodsSaturation method
BS EN ISO 6149-1:2007. Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealingPorts with truncated housing for O-ring seal
BS EN ISO 6149-2:2007. Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealingDimensions, design, test methods and requirements for heavy-duty (S series) stud ends
BS EN ISO 6149-3:2007. Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealingDimensions, design, test methods and requirements for light-duty (L series) stud ends
BS EN ISO 6157-2:2004. Fasteners. Surface discontinuitiesNuts
BS EN ISO 6158:2004. Metallic coatings. Electrodeposited coatings of chromium for engineering purposes
BS EN ISO 6158:2011. Metallic and other inorganic coatings. Electrodeposited coatings of chromium for engineering purposes
BS EN ISO 6165:2001, BS 6914-1:1997. Earth-moving machinery. Basic types. Vocabulary
BS EN ISO 6165:2002, BS 6914-1:2002. Earth-moving machinery. Basic types. Vocabulary
BS EN ISO 6165:2006. Earth-moving machinery. Basic types. Identification and terms and definitions
BS EN ISO 6165:2012. Earth-moving machinery. Basic types. Identification and terms and definitions
BS EN ISO 6179:2001. Rubber, vulcanized or thermoplastic. Rubber sheets and rubber-coated fabrics. Determination of transmission rate of volatile liquids (gravimetric technique)
BS EN ISO 6179:2010. Rubber, vulcanized or thermoplastic. Rubber sheets and rubber-coated fabrics. Determination of transmission rate of volatile liquids (gravimetric technique)
BS EN ISO 6185-1:2001. Inflatable boatsBoats with a maximum motor power rating of 4,5 kW
BS EN ISO 6185-2:2001. Inflatable boatsBoats with a maximum motor power rating of 4.5 kW to 15 kW inclusive
BS EN ISO 6185-3:2001. Inflatable boatsBoats with maximum motor power rating of 15 kW and greater
BS EN ISO 6185-4:2011. Inflatable boatsBoats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater
BS EN ISO 6186:1999. Plastics. Determination of pourability
BS EN ISO 62:1999. Plastics. Determination of water absorption
BS EN ISO 62:2008. Plastics. Determination of water absorption
BS EN ISO 6218:2005. Inland navigation vessels. Manually operated coupling devices for push tows. Safety requirements and main dimensions
BS EN ISO 6222:1999, BS 6068-4.5:1999. Water quality. Enumeration of culturable micro-organisms. Colony count by inoculation in a nutrient agar culture medium
BS EN ISO 6224:1997. Plastics hoses, textile-reinforced, for general-purpose water applications. Specification
BS EN ISO 6224:2008. Thermoplastics hoses, textile-reinforced, for general- purpose water applications. Specification
BS EN ISO 6224:2011. Thermoplastics hoses, textile-reinforced, for general-purpose water applications. Specification
BS EN ISO 6245:1996, BS 2000-4:1996. Petroleum products. Determination of ash
BS EN ISO 6245:2002, BS 2000-4:2002. Methods of test for petroleum and its products. BS 2000-4: Determination of ash
BS EN ISO 6246:1998, BS 2000-131:1998,ISO 6246:1995. Petroleum products. Gum content of light and middle distillate fuels. Jet evaporation method
BS EN ISO 6251:1995, BS 2000- 411:1995,ISO 6251:1982. Liquefied petroleum gases. Corrosiveness to copper. Copper strip test
BS EN ISO 6251:1998, BS 2000-411:1998,ISO 6251:1996. Liquid petroleum gases. Corrosiveness to copper. Copper strip test
BS EN ISO 6252:1998. Plastics. Determination of environmental stress cracking (ESC). Constant-tensile-stress method
BS EN ISO 6259-1:2001. Thermoplastics pipes. Determination of tensile propertiesGeneral test method
BS EN ISO 6270:1995, BS 3900-F9:1982. Paints and varnishes. Determination of resistance to humidity (continuous condensation)
BS EN ISO 6270-1:2001, BS 3900-F9:2001. Paints and varnishes. Determination of resistance to humidityContinuous condensation
BS EN ISO 6270-2:2005, BS 3900-F21:2005. Paints and varnishes. Determination of resistance to humidityProcedure for exposing test specimens in condensation-water atmospheres
BS EN ISO 6271-1:2004, BS 6782-12.1:2004. Clear liquids. Estimation of colour by the platinum-cobalt scaleVisual method
BS EN ISO 6271-2:2004, BS 6782-12.2:2004. Clear liquids. Estimation of colour by the platinum-cobalt scaleSpectrophotometric method
BS EN ISO 6272:1994, BS 3900-E13:1993. Paints and varnishes. Falling-weight test
BS EN ISO 6272-1:2004, BS 3900-E13:2004. Paints and varnishes. Rapid-deformation (impact resistance) testsFalling-weight test, large-area indenter
BS EN ISO 6272-1:2011. Paints and varnishes. Rapid-deformation (impact resistance) testsFalling-weight test, large-area indenter
BS EN ISO 6272-2:2006. Paints and varnishes. Rapid-deformation (impact resistance) testsFalling weight test, small-area indenter
BS EN ISO 6272-2:2011. Paints and varnishes. Rapid-deformation (impact resistance) testsFalling-weight test, small-area indenter
BS EN ISO 6284:1999. Construction drawings. Indication of limit deviations
BS EN ISO 6320:2000, BS 684-1.2:2000. Animal and vegetable fats and oils. Determination of refractive index
BS EN ISO 6321:2002, BS 684-1.3:2002. Animal and vegetable fats and oils. Determination of melting point in open capillary tubes (slip point)
BS EN ISO 6326-1:2009. Natural gas. Determination of sulfur compoundsGeneral introduction
BS EN ISO 6326-3:1998, BS 3156-11.4.3:1994. Natural gas. Determination of sulfur compoundsDetermination of hydrogen sulfide, mercaptan sulfur, and carbonyl sulfide sulfur by potentiometry
BS EN ISO 6326-5:1998, BS 3156-11.4.5:1994. Natural gas. Determination of sulfur compoundsLingener combustion method
BS EN ISO 6327:2008. Gas analysis. Determination of the water dew point of natural gas. Cooled surface condensation hygrometers
BS EN ISO 6330:2001+A1:2009. Textiles. Domestic washing and drying procedures for textile testing
BS EN ISO 6330:2012. Textiles. Domestic washing and drying procedures for textile testing
BS EN ISO 6341:1996, BS 6068-5.1:1996. Water quality. Biological methodsWater quality. Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea). Acute toxicity test
BS EN ISO 6341:2012. Water quality. Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea). Acute toxicity test
BS EN ISO 6346:1995+A3:2012. Freight containers. Coding, identification and marking
BS EN ISO 636:2008. Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels. Classification
BS EN ISO 6360-2:2004+A1:2011. Dentistry. Number coding system for rotary instrumentsShapes
BS EN ISO 6360-3:2005. Dentistry. Number coding system for rotary instrumentsSpecific characteristics of burs and cutters
BS EN ISO 6360-4:2004. Dentistry. Number coding system for rotary instrumentsSpecific characteristics of diamond instruments
BS EN ISO 6360-5:2007. Dentistry. Number coding system for rotary instrumentsSpecific characteristics of root-canal instruments
BS EN ISO 6360-6:2004. Dentistry. Number coding system for rotary instrumentsSpecific characteristics of abrasive instruments
BS EN ISO 6360-7:2006. Dentistry. Number coding system for rotary instrumentsSpecific characteristics of mandrels and special instruments
BS EN ISO 638:2008. Paper, board and pulps. Determination of dry matter content. Oven-drying method
BS EN ISO 6383-1:2004. Plastics. Film and sheeting. Determination of tear resistanceTrouser tear method
BS EN ISO 6383-2:2004. Plastics. Film and sheeting. Determination of tear resistanceElmendorf method
BS EN ISO 6385:2004. Ergonomic principles in the design of work systems
BS EN ISO 6401:2004. Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of residual vinyl chloride monomer. Gas chromatographic method
BS EN ISO 6401:2008. Plastics. Poly(vinyl chloride). Determination of residual vinyl chloride monomer. Gas-chromatographic method
BS EN ISO 6402-1:1999. Plastics. Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materialsDesignation system and basis for specifications
BS EN ISO 6402-1:2001. Plastics. Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materialsDesignation system and basis for specifications
BS EN ISO 6402-1:2002. Plastics. Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materialsDesignation system and basis for specifications
BS EN ISO 6402-2:1999. Plastics. Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materialsPreparation of test specimens and determination of properties
BS EN ISO 6402-2:2003. Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 6410-1:1996, BS 308-1.10:1996. Technical drawings. Screw threads and threaded partsGeneral conventions
BS EN ISO 6410-2:1996, BS 308-1.11:1996. Technical drawings. Screw threads and threaded partsScrew thread inserts
BS EN ISO 6410-3:1996, BS 308-1.20:1996. Technical drawings. Screw threads and threaded partsSimplified representation
BS EN ISO 6411:1997, BS 308-1.23:1997. Technical drawings. Simplified representation of centre holes
BS EN ISO 6412-1:1995, BS 308-4.6:1995. Technical drawings. Simplified representation of pipelinesGeneral rules and orthogonal representation
BS EN ISO 6412-2:1995, BS 308-4.7:1995. Technical drawings. Simplified representation of pipelinesIsometric projection
BS EN ISO 6412-3:1996, BS 308-4.8:1996. Technical drawings. Simplified representation of pipelinesTerminal features of ventilation and drainage systems
BS EN ISO 6413:1995, BS 308-1.9:1995. Technical drawings. Representation of splines and serrations
BS EN ISO 6414:1995. Technical drawings for glassware
BS EN ISO 6416:2005. Hydrometry. Measurement of discharge by the ultrasonic (acoustic) method
BS EN ISO 642:1999. Steel hardenability test by end quenching (Jominy test)
BS EN ISO 6427:1999, BS 2782-4:Method 455A:1993. Plastics. Determination of matter extractable by organic solvents (conventional methods)
BS EN ISO 6428:1999. Technical drawings. Requirements for microcopying
BS EN ISO 643:2003. Steels. Micrographic determination of the apparent grain size
BS EN ISO 643:2012. Steels. Micrographic determination of the apparent grain size
BS EN ISO 6433:1995, BS 308-1.8:1995. Technical drawings. Item references
BS EN ISO 6433:2012. Technical product documentation. Part references
BS EN ISO 6465:2009. Spices. Cumin (Cuminum cyminum L.). Specification
BS EN ISO 6468:1997, BS 6068-2.57:1997. Water quality. Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes. Gas chromatographic method after liquid-liquid extraction
BS EN ISO 648:2008. Laboratory glassware. Single-volume pipettes
BS EN ISO 6497:2005. Animal feeding stuffs. Sampling
BS EN ISO 6498:2012. Animal feeding stuffs. Guidelines for sample preparation
BS EN ISO 6504-1:2006, BS 3900-D7:1983. Paints and varnishes. Determination of hiding powerKubelka-Munk method for white and light-coloured paints
BS EN ISO 6504-3:2007, BS 3900-D11:2007. Paints and varnishes. Determination of hiding powerDetermination of contrast ratio of light-coloured paints at a fixed spreading rate
BS EN ISO 6506-1:1999. Metallic materials. Brinell hardness testTest method
BS EN ISO 6506-1:2005. Metallic materials. Brinell hardness testTest method
BS EN ISO 6506-2:1999. Metallic materials. Brinell hardness testVerification and calibration of Brinell hardness testing machines
BS EN ISO 6506-2:2005. Metallic materials. Brinell hardness testVerification and calibration of testing machines
BS EN ISO 6506-3:1999. Metallic materials. Brinell hardness testCalibration of reference blocks
BS EN ISO 6506-3:2005. Metallic materials. Brinell hardness testCalibration of reference blocks
BS EN ISO 6506-4:2005. Metallic materials. Brinell hardness testTable of hardness values
BS EN ISO 6507-1:1998. Metallic materials. Vickers hardness testTest method
BS EN ISO 6507-1:2005. Metallic materials. Vickers hardness testTest method
BS EN ISO 6507-2:1998. Metallic materials. Vickers hardness testVerification of testing machines
BS EN ISO 6507-2:2005. Metallic materials. Vickers hardness testVerification and calibration of testing machines
BS EN ISO 6507-3:1998. Metallic materials. Vickers hardness testCalibration of reference blocks
BS EN ISO 6507-3:2005. Metallic materials. Vickers hardness testCalibration of reference blocks
BS EN ISO 6507-4:2005. Metallic materials. Vickers hardness testTables of hardness values
BS EN ISO 6508-1:1999. Metallic materials. Rockwell hardness testTest method (scales A, B, C, D, E, F, G, H, K, N, T)
BS EN ISO 6508-1:2005. Metallic materials. Rockwell hardness testTest method (scales A, B, C, D, E, F, G, H, K, N, T)
BS EN ISO 6508-2:1999. Metallic materials. Rockwell hardness testVerification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
BS EN ISO 6508-2:2005. Metallic materials. Rockwell hardness testVerification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
BS EN ISO 6508-3:1999. Metallic materials. Rockwell hardness testCalibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
BS EN ISO 6508-3:2005. Metallic materials. Rockwell hardness testCalibration and reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
BS EN ISO 6509:1995. Corrosion of metals and alloys. Determination of dezincification resistance of brass
BS EN ISO 6520-1:1998. Welding and allied processes. Classification of geometric imperfections in metallic materialsFusion welding
BS EN ISO 6520-1:2007. Welding and allied processes. Classification of geometric imperfections in metallic materialsFusion welding
BS EN ISO 6520-2:2002. Welding and allied processes. Classification of geometric imperfections in metallic materialsWelding with pressure
BS EN ISO 6520-2:2013. Welding and allied processes. Classification of geometric imperfections in metallic materialsWelding with pressure
BS EN ISO 6529:2001. Protective clothing. Protection against chemicals. Determination of resistance of protective clothing materials to permeation by liquids and gases
BS EN ISO 6530:2005. Protective clothing. Protection agaist liquid chemicals. Test method for resistance of materials to penetration by liquids
BS EN ISO 6540:2010. Maize. Determination of moisture content (on milled grains and on whole grains)
BS EN ISO 6551:1996. Petroleum liquids and gases. Fidelity and security of dynamic measurement. Cabled transmission of electric and/or electronic pulsed data
BS EN ISO 6556:2012. Laboratory glassware. Filter flasks
BS EN ISO 6570:2004. Natural gas. Determination of potential hydrocarbon liquid content. Gravimetric methods
BS EN ISO 6571:2009. Spices, condiments and herbs. Determination of volatile oil content (hydrodistillation method)
BS EN ISO 6579:2002+A1:2007. Microbiology of food and animal feeding stuffs. Horizontal method for the detection of Salmonella spp.
BS EN ISO 658:1995, BS 4289-2:1995. Oilseeds. Determination of impurities content
BS EN ISO 658:2002. Oilseeds. Determination of content of impurities
BS EN ISO 6581:2010. Anodizing of aluminium and its alloys. Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
BS EN ISO 659:1999, BS 4289-4:1999. Oilseeds. Determination of oil content (Reference method)
BS EN ISO 659:2009. Oilseeds. Determination of oil content (Reference method)
BS EN ISO 660:2000. Animal and vegetable fats and oils. Determination of acid value and acidity
BS EN ISO 660:2009. Animal and vegetable fats and oils. Determination of acid value and acidity
BS EN ISO 6603-1:1997. Plastics. Determination of multi-axial impact behaviour of rigid plasticsFalling dart method
BS EN ISO 6603-1:2000. Plastics. Determination of multi-axial impact behaviour of rigid plasticsNon-instrumented impact testing
BS EN ISO 6603-2:1997, BS 2782-3:Method 353B:1991. Plastics. Determination of multi-axial impact behaviour of rigid plasticsInstrumented puncture test
BS EN ISO 6603-2:2000. Plastics. Determination of multi-axial impact behaviour of rigid plasticsInstrumented puncture testing
BS EN ISO 661:1995, BS 684-0.2:1995. Animal and vegetable fats and oils. Preparation of test sample
BS EN ISO 661:2005. Animal and vegetable fats and oils. Preparation of test sample
BS EN ISO 662:2001, BS 684-1.10:1998. Animal and vegetable fats and oils. Determination of moisture and volatile matter content
BS EN ISO 663:1995, BS 684-2.3:1995. Animal and vegetable fats and oils. Determination of insoluble impurities content
BS EN ISO 663:2001. Animal and vegetable fats and oils. Determination of insoluble impurities content
BS EN ISO 663:2008. Animal and vegetable fats and oils. Determination of insoluble impurities content
BS EN ISO 664:1995, BS 4289-1:1995. Oilseeds. Reduction of laboratory sample to test sample
BS EN ISO 664:2008. Oilseeds. Reduction of laboratory sample to test sample
BS EN ISO 6644:2007. Flowing cereals and milled cereal products. Automatic sampling by mechanical means
BS EN ISO 6647-1:2007. Rice. Determination of amylose contentReference method
BS EN ISO 6647-2:2007. Rice. Determination of amylose contentRoutine methods
BS EN ISO 665:1995, BS 4289-3:1995. Oilseeds. Determination of moisture and volatile matter content
BS EN ISO 665:2000, BS 4289-3:2000. Oilseeds. Determination of moisture and volatile matter content
BS EN ISO 6682:1995. Earth-moving machinery. Zones of comfort and reach for controls
BS EN ISO 6682:2008. Earth-moving machinery. Zones of comfort and reach for controls
BS EN ISO 6683:2000, BS 6912-29:2000. Earth-moving machinery. Seat belts and seat belt anchorages
BS EN ISO 6683:2005. Earth-moving machinery. Seat belts and seat belt anchorages. Performance requierments and tests
BS EN ISO 6683:2008. Earth-moving machinery. Seat belts and seat belt anchorages. Performance requirements and tests
BS EN ISO 6708:1996. Pipework components. Definition and selection of DN (nominal size)
BS EN ISO 6709:2009. Standard representation of geographic point location by coordinates
BS EN ISO 6719:2010. Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
BS EN ISO 6721-1:1996, BS 2782-3:Method 342A:1996. Plastics. Determination of dynamic mechanical propertiesGeneral principles
BS EN ISO 6721-1:2002. Plastics. Determination of dynamic mechanical propertiesGeneral principles
BS EN ISO 6721-1:2011. Plastics. Determination of dynamic mechanical propertiesGeneral principles
BS EN ISO 6721-2:1996, BS 2782-3:Method 342B:1996. Plastics. Determination of dynamic mechanical propertiesTorsion-pendulum method
BS EN ISO 6721-2:2008. Plastics. Determination of dynamic mechanical propertiesTorsion-pendulum method
BS EN ISO 6721-3:1996, BS 2782-3:Method 338A:1996. Plastics. Determination of dynamic mechanical propertiesFlexural vibration. Resonance-curve method
BS EN ISO 6743-4:2001. Lubricants, industrial oils and related products (class L). ClassificationFamily H (hydraulic systems)
BS EN ISO 6744-1:2004, BS 6782-16.1:2000. Binders for paints and varnishes. Alkyd resinsGeneral methods
BS EN ISO 6744-2:2004, BS 6782-16.2:2000. Binders for paints and varnishes. Alkyd resinsDetermination of phthalic anhydride content
BS EN ISO 6744-3:2004, BS 6782-16.3:2000. Binders for paints and varnishes. Alkyd resinsDetermination of unsaponifiable matter content
BS EN ISO 6744-4:2004, BS 6782-16.4:2000. Binders for paints and varnishes. Alkyd resinsDetermination of fatty acid content
BS EN ISO 676:2009. Spices and condiments. Botanical nomenclature
BS EN ISO 6785:2007. Milk and milk products. Detection of Salmonella spp.
BS EN ISO 6789:2003. Assembly tools for screws and nuts. Hand torque tools. Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure
BS EN ISO 6800:1998, BS 684-2.39:1998. Animal and vegetable fats and oils. Determination of the composition of fatty acids in the 2-position of the triglyceride molecules
BS EN ISO 6802:2008. Rubber and plastics hoses and hose assemblies with wire reinforcements. Hydraulic impulse test with flexing
BS EN ISO 6803:1997. Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing
BS EN ISO 6803:2008. Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing
BS EN ISO 6806:1996. Rubber hoses and hose assemblies for use in oil burners. Specification
BS EN ISO 6807:2003. Rubber hoses and hose assemblies for rotary drilling and vibration applications. Specifications
BS EN ISO 6808:2001. Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids. Specification
BS EN ISO 6817:1997. Measurement of conductive liquid flow in closed conduits. Method using electromagnetic flowmeters
BS EN ISO 683-17:1999. Heat-treated steels, alloy steels and free-cutting steelsBall and roller bearing steels
BS EN ISO 6845:2003, ISO 6845:1989. Surface active agents. Technical alkane sulfonates. Determination of mean relative molecular mass and content of the alkane monosulphonates and the alkane monosulfonate content
BS EN ISO 6847:2001. Welding consumables. Deposition of a weld metal pad for chemical analysis
BS EN ISO 6847:2013. Welding consumables. Deposition of a weld metal pad for chemical analysis
BS EN ISO 6848:2004. Arc welding and cutting. Nonconsumable tungsten electrodes. Classification
BS EN ISO 6860:1995, BS 3900-E11:1985. Paints and varnishes. Bend test (conical mandrel)
BS EN ISO 6860:2006, BS 3900-E11:2006. Paints and varnishes. Bend test (conical mandrel)
BS EN ISO 6867:2001, BS 5766-24:2001. Animal feeding stuffs. Determination of vitamin E content. Method using high-performance liquid chromatography
BS EN ISO 6869:2001, BS 5766-25:2001. Animal feeding stuffs. Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc. Method using atomic absorption spectrometry
BS EN ISO 6871-1:1997. Dental base metal casting alloysCobalt-based alloys
BS EN ISO 6871-2:1997. Dental base metal casting alloysNickel-based alloys
BS EN ISO 6872:1999. Dental ceramic
BS EN ISO 6872:2008. Dentistry. Ceramic materials
BS EN ISO 6873:2000. Dental gypsum products
BS EN ISO 6873:2013. Dentistry. Gypsum products
BS EN ISO 6874:2005. Dentistry. Polymer-based pit and fissure sealants
BS EN ISO 6875:1997. Dental equipment. Dental patient chair
BS EN ISO 6875:2011. Dentistry. Patient chair
BS EN ISO 6876:2002. Dental root canal sealing materials
BS EN ISO 6876:2012. Dentistry. Root canal sealing materials
BS EN ISO 6877:1998. Dental root-canal obturating points
BS EN ISO 6877:2006. Dentistry. Root-canal obturating points
BS EN ISO 6878:2004, BS 6068-2.28:2004. Water quality. Determination of phosphorus. Ammonium molybdate spectrometric method
BS EN ISO 6885:2001. Animal and vegetable fats and oils. Determination of anisidine value
BS EN ISO 6885:2007. Animal and vegetable fats and oils. Determination of anisidine value
BS EN ISO 6886:2008. Animal and vegetable fats and oils. Determination of oxidative stability (accelerated oxidation test)
BS EN ISO 6887-1:1999. Microbiology of food and animal feeding stuffs. Preparation of test samples, initial suspension and decimal dilutions for microbiological examinationGeneral rules for the preparation of the initial suspension and decimal dilutions
BS EN ISO 6887-2:2003. Microbiology of food and animal feeding stuffs. Preparation of test samples, initial suspension and decimal dilutions for microbiological examinationSpecific rules for the preparation of meat and meat products
BS EN ISO 6887-3:2003. Microbiology of food and animal feeding stuffs. Preparation of test samples, initial suspension and decimal dilutions for microbiological examinationSpecific rules for the preparation of fish and fishery products
BS EN ISO 6887-4:2003+A1:2011. Microbiology of food and animal feeding stuffs. Preparation of test samples, initial suspension and decimal dilutions for microbiological examinationSpecific rules for the preparation of products other than milk and milk products, meat and meat products, and fish and fishery products
BS EN ISO 6887-5:2010. Microbiology of food and animal feeding stuffs. Preparation of test samples, initial suspension and decimal dilutions for microbiological examinationSpecific rules for the preparation of milk and milk products
BS EN ISO 6887-6:2013. Microbiology of food and animal feed. Preparation of test samples, initial suspension and decimal dilutions for microbiological examinationSpecific rules for the preparation of samples taken at the primary production stage
BS EN ISO 6888-1:1999. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species)Technique using Baird-Parker agar medium
BS EN ISO 6888-2:1999. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species)Technique using rabbit plasma fibrinogen agar medium
BS EN ISO 6888-3:2003. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species)Detections and MPN technique for low numbers
BS EN ISO 6892-1:2009. Metallic materials. Tensile testingMethod of test at ambient temperature
BS EN ISO 6892-2:2011. Metallic materials. Tensile testingMethod of test at elevated temperature
BS EN ISO 6926:2001. Acoustics. Requirements for the performance and calibration of reference sound sources for the determination of sound power levels
BS EN ISO 6927:2012. Buildings and civil engineering works. Sealants. Vocabulary
BS EN ISO 694:2001. Ships and marine technology. Positioning of magnetic compasses in ships
BS EN ISO 6940:1995. Textile fabrics. Burning behaviour. Determination of ease of ignition of vertically oriented specimens
BS EN ISO 6940:2004. Textile fabrics. Burning behaviour. Determination of ease of ignition of vertically oriented specimens
BS EN ISO 6941:1995, ISO 6941:1984. Textile fabrics. Burning behaviour. Measurement of flame spread properties of vertically oriented specimens
BS EN ISO 6941:2003. Textile fabrics. Burning behaviour. Measurement of flame spread properties of vertically oriented specimens
BS EN ISO 6942:2002. Protective clothing. Protection against heat and fire. Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat
BS EN ISO 6945:1996. Rubber hoses. Determination of abrasion resistance of the outer cover
BS EN ISO 6946:1997. Building components and building elements. Thermal resistance and thermal transmittance. Calculation method
BS EN ISO 6946:2007. Building components and building elements. Thermal resistance and thermal transmittance. Calculation method
BS EN ISO 6947:1997. Welds. Working positions. Definitions of angles of slope and rotation
BS EN ISO 6947:2011. Welding and allied processes. Welding positions
BS EN ISO 6974-1:2001. Natural gas. Determination of composition with defined uncertainty by gas chromatographyGuidelines for tailored analysis
BS EN ISO 6974-1:2012. Natural gas. Determination of composition and associated uncertainty by gas chromatography General guidelines and calculation of composition
BS EN ISO 6974-2:2002. Natural gas. Determination of composition with defined uncertainty by gas chromatographyMeasuring-system characteristics and statistics for processing of data
BS EN ISO 6974-2:2012. Natural gas. Determination of composition and associated uncertainty by gas chromatographyUncertainty calculations
BS EN ISO 6974-3:2001. Natural gas. Determination of composition with defined uncertainty by gas chromatographyDetermination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns
BS EN ISO 6974-4:2001. Natural gas. Determination of composition with defined uncertainty by gas chromatographyDetermination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns
BS EN ISO 6974-5:2001. Natural gas. Determination of composition with defined uncertainty by gas chromatographyDetermination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns
BS EN ISO 6974-6:2008. Natural gas. Determination of composition with defined uncertainty by gas chromatographyDetermination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
BS EN ISO 6975:2005. Natural gas. Extended analysis. Gas chromatographic method
BS EN ISO 6976:2005. Natural gas. Calculation of calorific values, density, relative density and Wobbe index from composition
BS EN ISO 6978-1:2005. Natural gas. Determination of mercurySampling of mercury by chemisorption on iodine
BS EN ISO 6978-2:2005. Natural gas. Determination of mercurySampling of mercury by amalgamation on gold/platinum alloy
BS EN ISO 6988:1995. Metallic and other non-organic coatings. Sulfur dioxide test with general condensation of moisture
BS EN ISO 7010:2012. Graphical symbols. Safety colours and safety signs. Registered safety signs
BS EN ISO 7027:2000, BS 6068-2.13:2000. Water quality. Determination of turbidity
BS EN ISO 7029:2000. Acoustics. Statistical distribution of hearing thresholds as a function of age
BS EN ISO 703:2007. Conveyor belts. Transverse flexibility (troughability). Test method
BS EN ISO 703-1:2000. Conveyor belts. Transverse flexibility and troughabilityTest method
BS EN ISO 7040:1998. Prevailing torque type hexagon nuts (with non-metallic insert), style 1. Property classes 5, 8 and 10
BS EN ISO 7040:2012. Prevailing torque type hexagon regular nuts (with non-metallic insert). Property classes 5, 8 and 10
BS EN ISO 7042:1998. Prevailing torque type all-metal hexagon nuts. Property classes 5, 8, 10 and 12
BS EN ISO 7042:2012. Prevailing torque type all-metal hexagon high nuts. Property classes 5, 8, 10 and 12
BS EN ISO 7045:1995. Pan head screws with type H or type Z cross recess. Product grade A
BS EN ISO 7045:2011. Pan head screws with type H or type Z cross recess. Product grade A
BS EN ISO 7046-1:1994. Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade ASteel of property class 4.8
BS EN ISO 7046-1:2011. Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade ASteel of property class 4.8
BS EN ISO 7046-2:1995. Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade ASteel of property class 8.8, stainless steel and non-ferrous metals
BS EN ISO 7046-2:2011. Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade ASteel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
BS EN ISO 7047:1995. Countersunk raised head screws (common head style) with type H or type Z cross recess. Product grade A
BS EN ISO 7047:2011. Raised countersunk head screws (common head style) with type H or type Z cross recess. Product grade A
BS EN ISO 7048:1999. Cross recessed cheese head screws
BS EN ISO 7048:2011. Cross-recessed cheese head screws
BS EN ISO 7049:1995. Cross recessed pan head tapping screws
BS EN ISO 7049:2011. Cross-recessed pan head tapping screws
BS EN ISO 7050:1995. Specification for cross-recessed countersunk (flat) head tapping screws (common head style)
BS EN ISO 7050:2011. Cross-recessed countersunk (flat) head tapping screws
BS EN ISO 7051:1995. Specification for cross-recessed raised countersunk (oval) head tapping screws
BS EN ISO 7051:2011. Cross-recessed raised countersunk (oval) head tapping screws
BS EN ISO 7053:2011. Hexagon washer head tapping screws
BS EN ISO 707:1997. Milk and milk products. Guidance on sampling
BS EN ISO 707:2008. Milk and milk products. Guidance on sampling
BS EN ISO 7083:1995, BS 308-3.6:1995. Technical drawings. Symbols for geometrical tolerancing. Proportions and dimensions
BS EN ISO 7085:1999. Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
BS EN ISO 7088:2005. Fish-meal. Vocabulary
BS EN ISO 7089:2000. Plain washers. Normal series. Product grade A
BS EN ISO 7090:2000. Plain washers, chamfered. Normal series. Product grade A
BS EN ISO 7091:2000. Plain washers. Normal series. Product grade C
BS EN ISO 7092:2000. Plain washers. Small series. Product grade A
BS EN ISO 7093-1:2000. Plain washers. Large seriesProduct grade A
BS EN ISO 7093-2:2000. Plain washers. Large seriesProduct grade C
BS EN ISO 7094:2000. Plain washers. Extra large series. Product grade C
BS EN ISO 7096:2000, BS 6912-17:2000. Earth-moving machinery. Laboratory evaluation of operator seat vibration
BS EN ISO 7096:2008. Earth-moving machinery. Laboratory evaluation of operator seat vibration
BS EN ISO 712:2009. Cereals and cereal products. Determination of moisture content. Reference method
BS EN ISO 7142:2004. Binders for paints and varnishes. Epoxy resins. General methods of test
BS EN ISO 7142:2007. Binders for paints and varnishes. Epoxy resins. General methods of test
BS EN ISO 7143:2004, BS 6782-18:2001. Paints, varnishes and binders. Methods of test for characterizing water-based coating materials and binders
BS EN ISO 7143:2007. Binders for Paints and varnishes. Methods of test for characterizing water-based binders
BS EN ISO 7153-1:2001, BS 5194-1:1991. Surgical instruments. Metallic materialsStainless steel
BS EN ISO 717-1:1997. Acoustics. Rating of sound insulation in buildings and of building elementsAirborne sound insulation
BS EN ISO 717-1:2013. Acoustics. Rating of sound insulation in buildings and of building elementsAirborne sound insulation
BS EN ISO 717-2:1997. Acoustics. Rating of sound insulation in buildings and of building elementsImpact sound insulation
BS EN ISO 717-2:2013. Acoustics. Rating of sound insulation in buildings and of building elementsImpact sound insulation
BS EN ISO 7197:2006. Neurosurgical implants. Sterile, single-use hydrocephalus shunts and components
BS EN ISO 7197:2009. Neurosurgical implants. Sterile, single-use hydrocephalus shunts and components
BS EN ISO 7200:2004. Technical product documentation. Data fields in title blocks and document headers
BS EN ISO 7208:2000. Skimmed milk, whey and buttermilk. Determination of fat content. Gravimetric method (reference method)
BS EN ISO 7208:2008. Skimmed milk, whey and buttermilk. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 7214:2002. Cellular plastics. Polyethylene. Methods of test
BS EN ISO 7214:2007. Cellular plastics. Polyethylene. Methods of test
BS EN ISO 7214:2012. Cellular plastics. Polyethylene. Methods of test
BS EN ISO 7218:2007+A1:2013. Microbiology of food and animal feeding stuffs. General requirements and guidance for microbiological examinations
BS EN ISO 7225:2007+A1:2012. Gas cylinders. Precautionary labels
BS EN ISO 7231:1998. Polymeric materials, cellular flexible. Method of assessment of air flow value at constant pressure-drop
BS EN ISO 7231:2010. Polymeric materials, cellular, flexible. Determination of air flow value at constant pressure-drop
BS EN ISO 7233:1995, ISO 7233:1991. Rubber and plastics hoses and hose assemblies. Determination of suction resistance
BS EN ISO 7233:2008. Rubber and plastics hoses and hose assemblies. Determination of resistance to vacuum
BS EN ISO 7235:1996. Acoustics. Measurement procedures for ducted silencers. Insertion loss, flow noise and total pressure loss
BS EN ISO 7235:2003. Acoustics. Laboratory measurement procedures for ducted silencers and air-terminal units. Insertion loss, flow noise and total pressure loss
BS EN ISO 7235:2009. Acoustics. Laboratory measurement procedures for ducted silencers and air-terminal units. Insertion loss, flow noise and total pressure loss
BS EN ISO 7250:1998. Basic human body measurements for technological design
BS EN ISO 7250-1:2010. Basic human body measurements for technological designBody measurement definitions and landmarks
BS EN ISO 7253:2001, BS 3900-F12:1997. Paints and varnishes. Determination of resistance to neutral salt spray (fog)
BS EN ISO 7263:1995. Corrugating medium. Determination of the flat crush resistance after laboratory fluting
BS EN ISO 7263:2008. Corrugating medium. Determination of the flat crush resistance after laboratory fluting
BS EN ISO 7263:2011. Corrugating medium. Determination of the flat crush resistance after laboratory fluting
BS EN ISO 7278-2:1996. Liquid hydrocarbons. Dynamic measurement. Proving systems for volumetric metersPipe provers
BS EN ISO 7284:1996. Resistance welding equipment. Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding as used in the automobile industry
BS EN ISO 7287:1995. Graphical symbols for thermal cutting equipment
BS EN ISO 7287:2002. Graphical symbols for thermal cutting equipment
BS EN ISO 7291:2001. Gas welding equipment. Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar
BS EN ISO 7291:2010. Gas welding equipment. Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar)
BS EN ISO 7326:2008. Rubber and plastics hoses. Assessment of ozone resistance under static conditions
BS EN ISO 7327:1997. Plastics. Hardeners and accelerators for epoxide resins. Determination of free acid in acid anhydride
BS EN ISO 7328:2000, BS 2472-3:2000. Milk based edible ices and ice mixes. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 7328:2008. Milk-based edible ices and ice mixes. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 734-1:2001. Oilseed residues. Determination of oil contentExtraction method with hexane (or light petroleum)
BS EN ISO 734-1:2006. Oilseed meals. Determination of oil contentExtraction method with hexane (or light petroleum)
BS EN ISO 734-2:2001. Oilseed residues. Determination of oil contentRapid extraction method
BS EN ISO 734-2:2008. Oilseed meals. Determination of oil contentRapid extraction method
BS EN ISO 734-2:2010. Oilseed meals. Determination of oil contentRapid extraction method
BS EN ISO 7345:1996. Thermal insulation. Physical quantities and definitions
BS EN ISO 7346-1:1998, BS 6068-5.2:1998. Water quality. Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)].Static method
BS EN ISO 7346-2:1998, BS 6068-5.3:1998. Water quality. Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)].Semi-static method
BS EN ISO 7346-3:1998, BS 6068-5.4:1998. Water quality. Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)].Flow-through method
BS EN ISO 7369:2004. Pipework. Metal hoses and hose assemblies. Vocabulary
BS EN ISO 7371:1996. Household refrigerating appliances. Refrigerators with or without low temperature compartment. Characteristics and test methods
BS EN ISO 7376:2003. Anaesthetic and respiratory equipment. Laryngoscopes for tracheal intubation
BS EN ISO 7376:2009. Anaesthetic and respiratory equipment. Laryngoscopes for tracheal intubation
BS EN ISO 7376:August 2009. Anaesthetic and respiratory equipment. Laryngoscopes for tracheal intubation
BS EN ISO 7380:1998. Hexagon socket button head screws
BS EN ISO 7380:2004. Hexagon socket button head screws
BS EN ISO 7380-1:2011. Button head screwsHexagon socket button head screws
BS EN ISO 7380-2:2011. Button head screwsHexagon socket button head screws with collar
BS EN ISO 7384:1995. Corrosion tests in artificial atmospheres. General requirements
BS EN ISO 7389:2003. Building construction. Jointing products. Determination of elastic recovery of sealants
BS EN ISO 7390:2003. Building construction. Jointing products. Determination of resistance to flow of sealants
BS EN ISO 7391-1:2000. Plastics. Polycarbonate (PC) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 7391-1:2006. Plastics. Polycarbonate (PC) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 7391-2:2000. Plastics. Polycarbonate (PC) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 7391-2:2006. Plastics. Polycarbonate (PC) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 7393-1:2000, BS 6068-2.25:1986. Water quality. Determination of free chlorine and total chlorineTitrimetric method using N,N-diethyl-1,4-phenylenediamine
BS EN ISO 7393-2:2000, BS 6068-2.26:1986. Water quality. Determination of free chlorine and total chlorineColorimetric method using N,N-diethyl-1,4-phenylenediamine for routine control purposes
BS EN ISO 7393-3:2000, BS 6068-2.27:1990. Water quality. Determination of free chlorine and total chlorineIodometric titration method for the determination of total chlorine
BS EN ISO 7396-1:2007+A3:2013. Medical gas pipeline systemsPipeline systems for compressed medical gases and vacuum
BS EN ISO 7396-2:2007. Medical gas pipeline systemsAnaesthetic gas scavenging disposal systems
BS EN ISO 7405:1997. Dentistry. Preclinical evaluation of biocompatibility of medical devices used in dentistry. Test methods for dental materials
BS EN ISO 7405:2008+A1:2013. Dentistry. Evaluation of biocompatibility of medical devices used in dentistry
BS EN ISO 7437:1996. Technical drawings. Construction drawings. General rules for execution of production drawings for prefabricated structural components
BS EN ISO 7438:2000. Metallic materials. Bend test
BS EN ISO 7438:2005. Metallic materials. Bend test
BS EN ISO 7439:2002. Copper-bearing intra-uterine contraceptive devices. Requirements, tests
BS EN ISO 7439:2009. Copper-bearing intra-uterine contraceptive devices. Requirements, tests
BS EN ISO 7439:2011. Copper-bearing contraceptive intrauterine devices. Requirements and tests
BS EN ISO 7441:1995. Corrosion of metals and alloys. Determination of bimetallic corrosion in outdoor exposure corrosion tests
BS EN ISO 7458:2004. Glass containers. Internal pressure resistance. Test methods
BS EN ISO 7459:2004. Glass containers. Thermal shock resistance and thermal shock endurance. Test methods
BS EN ISO 748:2000. Measurement of liquid flow in open channels. Velocity-area methods
BS EN ISO 748:2007. Hydrometry. Measurement of liquid flow in open channels using current-meters or floats
BS EN ISO 7488:1996. Dental amalgamators
BS EN ISO 7490:2001. Dental gypsum-bonded casting investments
BS EN ISO 7491:2000. Dental materials. Determination of colour stability
BS EN ISO 7492:1998. Dental explorers
BS EN ISO 7493:2000. Dental operator's stool
BS EN ISO 7493:2006. Dentistry. Operator's stool
BS EN ISO 7494:1998. Dental units
BS EN ISO 7494-1:2005. Dentistry. Dental unitsGeneral requirements and test methods
BS EN ISO 7494-1:2011. Dentistry. Dental unitsGeneral requirements and test methods
BS EN ISO 7494-2:2003. Dentistry. Dental unitsWater and air supply
BS EN ISO 7500-1:1999. Metallic materials. Verification of static uniaxial testing machinesTension/compression testing machines. Verification and calibration of the force-measuring system
BS EN ISO 7500-1:2004. Metallic materials. Verification of static uniaxial testing machinesTension/compression testing machines. Verification and calibration of the force-measuring system
BS EN ISO 7500-2:1999. Metallic materials. Verification of static uniaxial testing machinesTension creep testing machines. Verification of the applied load
BS EN ISO 7500-2:2006. Metallic materials. Verification of static uniaxial testing machinesTension creep testing machines. Verification of the applied force
BS EN ISO 75-1:1996, BS 2782-1:Method 121:1994,ISO 75-1:1993. Plastics. Determination of temperature of deflection under loadGeneral test method
BS EN ISO 75-1:2013. Plastics. Determination of temperature of deflection under loadGeneral test method
BS EN ISO 7518:1999. Construction drawings. Simplified representation of demolition and rebuilding
BS EN ISO 7519:1997. Technical drawings. Construction drawings. General principles of presentation for general arrangement and assembly drawings
BS EN ISO 75-2:1996, BS 2782-1:Methods 121A to 121C,ISO 75-2:1993. Plastics. Determination of temperature of deflection under loadPlastics and ebonite
BS EN ISO 75-2:2004. Plastics. Determination of temperature of deflection under loadPlastics and ebonite
BS EN ISO 75-2:2013. Plastics. Determination of temperature of deflection under loadPlastics and ebonite
BS EN ISO 75-3:1996, BS 2782-1:Method 121D:1994,ISO 75-3:1993. Plastics. Determination of temperature of deflection under loadHigh-strength thermosetting laminates and long-fibre-reinforced plastics
BS EN ISO 7536:1996, BS 2000-40:1996,ISO 7536:1994. Methods of test for petroleum and its products. Petroleum products. Determination of oxidation stability of gasoline. Induction period method
BS EN ISO 7539-1:1995. Corrosion of metals and alloys. Stress corrosion testingGeneral guidance on testing procedures
BS EN ISO 7539-1:2012. Corrosion of metals and alloys. Stress corrosion testingGeneral guidance on testing procedures
BS EN ISO 7539-2:1995. Corrosion of metals and alloys. Stress corrosion testingPreparation and use of bent-beam specimens
BS EN ISO 7539-3:1995. Corrosion of metals and alloys. Stress corrosion testingPreparation and use of U-bend specimens
BS EN ISO 7539-4:1995. Corrosion of metals and alloys. Stress corrosion testingPreparation and use of uniaxially loaded tension specimens
BS EN ISO 7539-5:1995. Corrosion of metals and alloys. Stress corrosion testingMethod for the preparation and use of C-ring specimens
BS EN ISO 7539-6:1995. Corrosion of metals and alloys. Stress corrosion testingPreparation and use of pre-cracked specimens
BS EN ISO 7539-6:2003. Corrosion of metals and alloys. Stress corrosion testingPreparation and use of pre-cracked specimens for tests under constant load or constant displacement
BS EN ISO 7539-6:2003. Corrosion of metals and alloys. Stress corrosion testingPreparation and use of pre-cracked specimens for tests under constant load or constant displacement
BS EN ISO 7539-6:2011. Corrosion of metals and alloys. Stress corrosion testingPreparation and use of precracked specimens for tests under constant load or constant displacement
BS EN ISO 7539-7:1995. Corrosion of metals and alloys. Stress corrosion testingSlow strain rate testing
BS EN ISO 7539-7:2005. Corrosion of metals and alloys. Stress corrosion testingMethod for slow strain rate testing
BS EN ISO 7539-8:2008. Corrosion of metals and alloys. Stress corrosion testingPreparation and use of specimens to evaluate weldments
BS EN ISO 7539-9:2008. Corrosion of metals and alloys. Stress corrosion testingPreparation and use of pre-cracked specimens for tests under rising load or rising displacement
BS EN ISO 7540:2010. Ground paprika (Capsicum annuum L.). Specification
BS EN ISO 7541:2010. Ground (powdered) paprika. Determination of total natural colouring matter content
BS EN ISO 7547:2004. Ships and marine technology. Air-conditioning and ventilation of accommodation spaces. Design conditions and basis of calculations
BS EN ISO 7551:1998. Dental absorbent points
BS EN ISO 7579:1997. Dyestuffs. Determination of solubility of dyestuffs in organic solvents. Gravimetric method
BS EN ISO 7579:2009. Dyestuffs. Determination of solubility in organic solvents. Gravimetric and photometric methods
BS EN ISO 7590:2001. Steel cord conveyor belts. Methods for the determination of total thickness and cover thickness
BS EN ISO 7590:2009. Steel cord conveyor belts. Methods for the determination of total thickness and cover thickness
BS EN ISO 7599:2010. Anodizing of aluminium and its alloys. General specifications for anodic oxidation coatings on aluminium
BS EN ISO 7622-1:1996. Steel cord conveyor belts. Longitudinal traction testMeasurement of elongation
BS EN ISO 7622-1:2013. Steel cord conveyor belts. Longitudinal traction testMeasurement of elongation
BS EN ISO 7622-2:1996. Steel cord conveyor belts. Longitudinal traction testMeasurement of tensile strength
BS EN ISO 7623:1997. Steel cord conveyor belts. Cord-to-coating bond test. Initial test and after thermal treatment
BS EN ISO 7625:2010. Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
BS EN ISO 7625:2012. Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
BS EN ISO 7662:1996. Rubber and plastics hoses. Determination of abrasion of lining
BS EN ISO 7668:2010. Anodizing of aluminium and its alloys. Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
BS EN ISO 7686:2005. Plastics pipes and fittings. Determination of opacity
BS EN ISO 7711-1:1998+A1:2009. Dental rotary instruments. Diamond instrumentsDimensions, requirements, marking and packaging
BS EN ISO 7711-2:1996. Dental rotary instruments. Diamond instrumentsDiscs
BS EN ISO 7711-2:2011. Dentistry. Rotary diamond instrumentsDiscs
BS EN ISO 7711-3:1996. Dental rotary instruments. Diamond instrumentsGrit sizes, designation and colour code
BS EN ISO 7711-3:2004. Dentistry. Diamond rotary instrumentsGrit sizes, designation and colour code
BS EN ISO 7719:1998. Prevailing torque type all-metal hexagon nuts, style 1. Property classes 5, 8 and 10
BS EN ISO 7719:2012. Prevailing torque type all-metal hexagon regular nuts. Property classes 5, 8 and 10
BS EN ISO 772:2001. Hydrometric determinations. Vocabulary and symbols
BS EN ISO 772:2011. Hydrometry. Vocabulary and symbols
BS EN ISO 7721-2:1995. Countersunk flat head screwsPenetration depth of cross recesses
BS EN ISO 7726:2001. Ergonomics of the thermal environment. Instruments for measuring physical quantities
BS EN ISO 7730:1995. Moderate thermal environments. Determination of the PMV and PPD indices and specification of the conditions for thermal comfort
BS EN ISO 7730:2005. Ergonomics of the thermal environment. Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
BS EN ISO 7731:2005. Ergonomics. Danger signals for public and work areas. Auditory danger signals
BS EN ISO 7731:2008. Ergonomics. Danger signals for public and work areas. Auditory danger signals
BS EN ISO 7751:1997+A1:2011. Rubber and plastics hoses and hose assemblies. Ratios of proof and burst pressure to maximum working pressure
BS EN ISO 7759:2010. Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
BS EN ISO 7765-1:2004. Plastics film and sheeting. Determination of impact resistance by the free-falling dart methodStaircase methods
BS EN ISO 7779:2001. Acoustics. Measurement of airborne noise emitted by information technology and telecommunications equipment
BS EN ISO 7779:2010. Acoustics. Measurement of airborne noise emitted by information technology and telecommunications equipment
BS EN ISO 7783:2011. Paints and varnishes. Determination of water-vapour transmission properties. Cup method
BS EN ISO 7783-1:2000, BS 3900-G9:1996. Paints and varnishes. Coating materials and coating systems for exterior masonry and concreteDetermination of water-vapour transmission rate of free films (dish method)
BS EN ISO 7783-2:1999. Paints and varnishes. Coating materials and coating systems for exterior masonry and concreteDetermination and classification of water-vapour transmission rate (permeability)
BS EN ISO 7784-1:2006, BS 3900-E14:2006. Paints and varnishes. Determination of resistance to abrasionRotating abrasive-paper-covered wheel method
BS EN ISO 7784-2:2006, BS 3900-E15:2006. Paints and varnishes. Determination of resistance to abrasionRotating abrasive rubber wheel method
BS EN ISO 7784-3:2006, BS 3900-E16:2000. Paints and varnishes. Determination of resistance to abrasionReciprocating test panel method
BS EN ISO 7785-1:1999, ISO 7785-1:1997. Dental handpiecesHigh-speed air turbine handpieces
BS EN ISO 7785-2:1998. Dental handpiecesStraight and geared angle handpieces
BS EN ISO 7786:2001. Dental rotary instruments. Laboratory abrasive instruments
BS EN ISO 7787-2:1995. Dental rotary instruments. CuttersCarbide laboratory cutters
BS EN ISO 7787-2:2001. Dental rotary instruments. CuttersCarbide laboratory cutters
BS EN ISO 7787-4:2002. Dental rotary instruments. CuttersMiniature carbide laboratory cutters
BS EN ISO 7792-1:2004. Plastics. Thermoplastic polyester (TP) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 7792-1:2012. Plastics. Thermoplastic polyester (TP) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 7792-2:2004. Plastics. Thermoplastic polyester (TP) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 7792-2:2012. Plastics. Thermoplastic polyester (TP) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 7799:2000. Metallic materials. Sheet and strip 3 mm thick or less. Reverse bend test
BS EN ISO 780:1999. Packaging. Pictorial marking for handling of goods
BS EN ISO 7808:1999, BS 2782-7:Method 722A:1993. Plastics. Thermosetting moulding materials. Determination of transfer flow
BS EN ISO 7822:1999. Textile glass reinforced plastics. Determination of void content. Loss on ignition, mechanical disintegration and statistical counting methods
BS EN ISO 7823-1:1996. Poly(methyl methacrylate) sheets. Types, dimensions and characteristicsCast sheets
BS EN ISO 7823-1:2000. Poly(methyl methacrylate) sheets. Types, dimensions and characteristicsCast sheets
BS EN ISO 7823-1:2003. Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristicsCast sheets
BS EN ISO 7823-2:1997. Poly(methyl methacrylate) sheets. Types, dimensions and characteristicsMelt-caldendered extruded sheets
BS EN ISO 7823-2:2003. Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristicsExtruded sheets
BS EN ISO 7823-3:2004. Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristicsContinuous cast sheets
BS EN ISO 7823-3:2007. Plastics. Poly(methacrylate) sheets. Types, dimensions and characteristicsContinuous cast sheets
BS EN ISO 7827:1996, BS 6068-5.6:1996. Water quality. Evaluation in an aqueous medium of the 'ultimate' aerobic biodegradability of organic compounds. Method by analysis of dissolved organic carbon (DOC)
BS EN ISO 7827:2012. Water quality. Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium. Method by analysis of dissolved organic carbon (DOC)
BS EN ISO 7837:2001. Fertilizers. Determination of bulk density (loose) of fine-grained fertilizers
BS EN ISO 7840:1995. Small craft. Fire resistant fuel hoses
BS EN ISO 7840:2004. Small craft. Fire-resistant fuel hoses
BS EN ISO 7840:2013. Small craft. Fire-resistant fuel hoses
BS EN ISO 7854:1997, BS 3424-9:1996. Rubber- or plastics-coated fabrics. Determination of resistance to damage by flexing
BS EN ISO 7864:1996. Sterile hypodermic needles for single use
BS EN ISO 7866:2012. Gas cylinders. Refillable seamless aluminium alloy gas cylinders. Design, construction and testing
BS EN ISO 787-10:1995. General methods of test for pigments and extendersDetermination of density. Pyknometer method
BS EN ISO 787-11:1995. General methods of test for pigments and extendersDetermination of tamped volume and apparent density after tamping
BS EN ISO 787-13:2002. General methods of test for pigments and extendersDetermination of water-soluble sulfates, chlorides and nitrates
BS EN ISO 787-14:2002. General methods of test for pigments and extendersDetermination of resistivity of aqueous extract
BS EN ISO 787-15:1995. General methods of test for pigments and extendersComparison of resistance to light of coloured pigments of similar types
BS EN ISO 787-16:1995. General methods of test for pigments and extendersDetermination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments. Visual comparison method
BS EN ISO 787-18:1995. General methods of test for pigments and extendersDetermination of residue on sieve. Mechanical flushing procedure
BS EN ISO 787-19:1995, BS 3483-C9:1995. General methods of test for pigments and extendersDetermination of water-soluble nitrates (Salicylic acid method)
BS EN ISO 787-2:1995. General methods of test for pigments and extendersDetermination of matter volatile at 105°C
BS EN ISO 787-23:1995. General methods of test for pigments and extendersDetermination of density (using a centrifuge to remove entrained air)
BS EN ISO 787-24:1995. General methods of test for pigments and extendersDetermination of relative tinting strength of coloured pigments and relative scattering power of white pigments. Photometric methods
BS EN ISO 787-25:2006, ISO 787-25:1993. General methods of test for pigments and extendersComparison of the colour, in full-shade systems, of white, black and coloured pigments. Colorimetric method
BS EN ISO 787-3:1995. General methods of test for pigments and extendersDetermination of matter soluble in water. Hot extraction method
BS EN ISO 787-3:2001. General methods of test for pigments and extendersDetermination of matter soluble in water. Hot extraction method
BS EN ISO 787-5:1995. General methods of test for pigments and extendersDetermination of oil absorption value
BS EN ISO 787-7:2009. General methods of test for pigments and extendersDetermination of residue on sieve. Water method. Manual procedure
BS EN ISO 787-8:1995. General methods of test for pigments and extendersDetermination of matter soluble in water (cold extraction method)
BS EN ISO 787-8:2001. General methods of test for pigments and extendersDetermination of matter soluble in water. Cold extraction method
BS EN ISO 787-9:1995. General methods of test for pigments and extendersDetermination of pH value of aqueous suspension
BS EN ISO 7885:1999. Sterile, single-use dental injection needles
BS EN ISO 7885:2001. Sterile dental injection needles for single use
BS EN ISO 7885:2010. Dentistry. Sterile injection needles for single use
BS EN ISO 7886-1:1997. Sterile hypodermic syringes for single useSyringes for manual use
BS EN ISO 7886-2:1997. Sterile hypodermic syringes for single useSyringes for use with power-driven syringe pumps
BS EN ISO 7886-3:2005. Sterile hypodermic syringes for single useAuto-disable syringes for fixed dose immunization
BS EN ISO 7886-3:2009. Sterile hypodermic syringes for single useAuto-disable syringes for fixed-dose immunization
BS EN ISO 7886-4:2006. Sterile hypodermic syringes for single useSyringes with re-use prevention feature
BS EN ISO 7886-4:2009. Sterile hypodermic syringes for single useSyringes with re-use prevention feature
BS EN ISO 7887:1995. Water quality. Examination and determination of colour
BS EN ISO 7887:2011. Water quality. Examination and determination of colour
BS EN ISO 7899-1:1999, BS 6068-4.3:1999. Water quality. Detection and enumeration of intestinal enterococci in surface and waste waterMiniaturized method (Most probable number) for surface and waste water
BS EN ISO 7899-2:2000, BS 6068-4.4:2000. Water quality. Detection and enumeration of intestinal enterococci in surface and waste waterMembrane filtration method
BS EN ISO 7932:1998. Microbiology. General guidance for the enumeration of Bacillus cereus. Colony-count technique at 30°C
BS EN ISO 7932:2004. Microbiology of food and animal feeding stuffs. Horizontal method for th e enumeration of presumptive Bacillus cereus. Colony-count technique at 30°C
BS EN ISO 7933:2004. Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
BS EN ISO 7937:2004. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of Clostridium perfringens. Colony-count technique
BS EN ISO 7944:1998. Optics and optical instruments. Reference wavelengths
BS EN ISO 7963:2010. Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 2
BS EN ISO 7965-2:1997. Sacks. Drop testSacks made from thermoplastic flexible film
BS EN ISO 7971-1:2009. Cereals. Determination of bulk density, called mass per hectolitre Reference method
BS EN ISO 7971-2:2009. Cereals. Determination of bulk density, called mass per hectolitreMethod of traceability for measuring instruments through reference to the international standard instrument
BS EN ISO 7971-3:2009. Cereals. Determination of bulk density, called mass per hectolitreRoutine method
BS EN ISO 7980:2000, BS 6068-2.30:1987. Water quality. Determination of calcium and magnesium. Atomic absorption spectrometric method
BS EN ISO 7998:1996. Optics and optical instruments. Spectacle frames. Vocabulary and lists of equivalent terms
BS EN ISO 7998:2005. Ophthalmic optics. Spectacle frames. Lists of equivalent terms and vocabulary
BS EN ISO 80000-1:2013. Quantities and unitsGeneral
BS EN ISO 80000-10:2013. Quantities and unitsAtomic and nuclear physics
BS EN ISO 80000-11:2013. Quantities and unitsCharacteristic numbers
BS EN ISO 80000-12:2013. Quantities and unitsSolid state physics
BS EN ISO 80000-2:2013. Quantities and unitsMathematical signs and symbols to be used in the natural sciences and technology
BS EN ISO 80000-3:2013. Quantities and unitsSpace and time
BS EN ISO 80000-4:2013. Quantities and unitsMechanics
BS EN ISO 80000-5:2013. Quantities and unitsThermodynamics
BS EN ISO 80000-8:2007. Quantities and unitsAcoustics
BS EN ISO 80000-9:2013+A1:2011. Quantities and unitsPhysical chemistry and molecular physics
BS EN ISO 801-1:1997. Pulps. Determination of saleable mass in lotsPulp baled in sheet form
BS EN ISO 801-3:1997. Pulps. Determination of saleable mass in lotsUnitized bales
BS EN ISO 8015:2011. Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules
BS EN ISO 8028:2000. Rubber and/or plastics hose assemblies for airless paint spraying. Specification
BS EN ISO 8029:2010. Plastics hose. General-purpose collapsible water hose, textile-reinforced. Specification
BS EN ISO 8030:1998. Rubber and plastics hoses. Method of test for flammability
BS EN ISO 8031:1997. Rubber and plastics hoses and hose assemblies. Determination of electrical resistance
BS EN ISO 8031:2009. Rubber and plastics hoses and hose assemblies. Determination of electrical resistance and conductivity
BS EN ISO 8032:1999. Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test)
BS EN ISO 8033:2006. Rubber and plastics hoses. Determination of adhesion between components
BS EN ISO 80369-1:2010. Small bore connectors for liquids and gases in healthcare applicationsGeneral requirements
BS EN ISO 8041:2005. Human response to vibration. Measuring instrumentation
BS EN ISO 8044:2000. Corrosion of metals and alloys. Basic terms and definitions
BS EN ISO 80601-2-12:2011. Medical electrical equipmentParticular requirements for basic safety and essential performance of critical care ventilators
BS EN ISO 80601-2-13:2012. Medical electrical equipmentParticular requirements for basic safety and essential performance of an anaesthetic workstation
BS EN ISO 80601-2-55:2011. Medical electrical equipmentParticular requirements for the basic safety and essential performance of respiratory gas monitors
BS EN ISO 80601-2-56:2012. Medical electrical equipmentParticular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement
BS EN ISO 80601-2-61:2011. Medical electrical equipmentParticular requirements for basic safety and essential performance of pulse oximeter equipment
BS EN ISO 8062-1:2007. Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded partsVocabulary
BS EN ISO 8062-3:2007. Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded partsGeneral dimensional and geometrical tolerances and machining allowances for castings
BS EN ISO 8067:1995. Flexible cellular polymeric materials. Determination of tear strength
BS EN ISO 8067:2008. Flexible cellular polymeric materials. Determination of tear strength
BS EN ISO 8069:2007. Dried milk. Determination of content of lactic acid and lactates
BS EN ISO 8092-1:1998. Road vehicles. Connections for on-board electrical wiring harnessesTabs for single-pole connections. Dimensions and specific requirements
BS EN ISO 8092-2:1998. Road vehicles. Connections for on-board electrical wiring harnessesDefinitions, test methods and general performance requirements
BS EN ISO 8092-2:2002. Road vehicles - Connections for on-board electrical wiring harnessesPart 2: Definitions, test methods and general performance requirements
BS EN ISO 8092-2:2002. Road vehicles. Connections for on-board electrical wiring harnessesDefinitions, test methods and general performance requirements
BS EN ISO 8092-2:2005. Road vehicles. Connections for on-board electrical wiring harnessesDefinitions, test methods and general performance requirements
BS EN ISO 8092-3:1999. Road vehicles. Connections for on-board electrical wiring harnessesTabs for multi-pole connections. Dimensions and specific requirements
BS EN ISO 8092-4:1999. Road vehicles. Connections for on-board electrical wiring harnessesPins for single- and multi-pole connections. Dimensions and specific requirements
BS EN ISO 8094:2013. Steel cord conveyor belts. Adhesion strength test of the cover to the core layer
BS EN ISO 8099:2001. Small craft. Toilet waste retention systems
BS EN ISO 8106:2004. Glass containers. Dermination of capacity by gravimetric method. Test method
BS EN ISO 81060-1:2012. Non-invasive sphygmomanometersRequirements and test methods for non-automated measurement type
BS EN ISO 8113:2004. Glass containers. Resistance to vertical load. Test method
BS EN ISO 8130-1:2010. Coating powdersDetermination of particle size distribution by sieving
BS EN ISO 8130-10:2010. Coating powdersDetermination of deposition efficiency
BS EN ISO 8130-11:2010. Coating powdersInclined-plane flow test
BS EN ISO 8130-12:2010. Coating powdersDetermination of compatibility
BS EN ISO 8130-13:2010. Coating powdersParticle size analysis by laser diffraction
BS EN ISO 8130-14:2004, BS 3900-J14:2004. Coating powdersTerminology
BS EN ISO 8130-2:2010. Coating powdersDetermination of density by gas comparison pyknometer (referee method)
BS EN ISO 8130-3:2010. Coating powdersDetermination of density by liquid displacement pyknometer
BS EN ISO 8130-4:2010. Coating powdersCalculation of lower explosion limit
BS EN ISO 8130-5:2010. Coating powdersDetermination of flow properties of a powder/air mixture
BS EN ISO 8130-6:2010. Coating powdersDetermination of gel time of thermosetting coating powders at a given temperature
BS EN ISO 8130-7:2010. Coating powdersDetermination of loss of mass on stoving
BS EN ISO 8130-8:2010. Coating powdersAssessment of the storage stability of thermosetting powders
BS EN ISO 8130-9:2000. Coating powdersSampling
BS EN ISO 8166:2003. Resistance welding. Procedure for the evaluation of the life of spot welding electrodes using constant machine settings
BS EN ISO 81714-1:2001. Design of graphical symbols for use in the technical documentation of productsBasic rules
BS EN ISO 81714-1:2010. Design of graphical symbols for use in the technical documentation of productsBasic rules
BS EN ISO 8178-1:1996. Reciprocating internal combustion engines. Exhaust emission measurementTest-bed measurement of gaseous and particulate exhaust emissions
BS EN ISO 8178-2:1997. Reciprocating internal combustion engines. Exhaust emission measurementMeasurement of gaseous and particulate exhaust emissions at site
BS EN ISO 8178-4:1996. Reciprocating internal combustion engines. Exhaust emission measurementTest cycles for different engine applications
BS EN ISO 8178-5:1997. Reciprocating internal combustion engines. Exhaust emission measurementTest fuels
BS EN ISO 8185:1998, BS 5724-2.24:1998. Humidifiers for medical use. General requirements for humidification systems
BS EN ISO 8185:2007. Respiratory tract humidifiers for medical use. Particular requirements for respiratory humidification systems
BS EN ISO 8185:2009. Respiratory tract humidifiers for medical use. Particular requirements for respiratory humidification systems
BS EN ISO 8192:1995, BS 6068-5.7:1987,ISO 8192:1986. Water quality. Test for the inhibition of oxygen consumption by activated sludge
BS EN ISO 8192:2007. Water quality. Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation
BS EN ISO 8199:2007. Water quality. General guidance on the enumeration of micro-organisms by culture
BS EN ISO 8205-1:1997. Water-cooled secondary connection cables for resistance welding.Dimensions and requirements for double-conductor connection cables
BS EN ISO 8205-1:2002. Water-cooled secondary connection cables for resistance welding.Dimensions and requirements for double-conductor connection cables
BS EN ISO 8205-2:1997. Water-cooled secondary connection cables for resistance welding.Dimensions and requirements for single-conductor connection cables
BS EN ISO 8205-2:2002. Water-cooled secondary connection cables for resistance welding.Dimensions and requirements for single-conductor connection cables
BS EN ISO 8205-3:1997. Water-cooled secondary connection cables for resistance welding.Test requirements
BS EN ISO 8205-3:2012. Water-cooled secondary connection cables for resistance weldingTest requirements
BS EN ISO 8222:1996. Petroleum measurement systems. Calibration. Temperature corrections for use with volumetric reference measuring systems
BS EN ISO 8222:2002. Petroleum measurement systems. Calibration. Temperature corrections for use when calibrating volumetric proving tanks
BS EN ISO 8224-1:2003+A1:2011. Traveller irrigation machinesOperational characteristics and laboratory and field test methods
BS EN ISO 8230:1998. Safety requirements for dry-cleaning machines using perchloroethylene
BS EN ISO 8230-1:2008. Safety requirements for dry-cleaning machinesCommon safety requirements
BS EN ISO 8230-2:2008. Safety requirements for dry-cleaning machines Machines using perchloroethylene
BS EN ISO 8230-3:2008. Safety requirements for dry-cleaning machinesMachines using combustible solvents
BS EN ISO 8249:2000. Welding. Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
BS EN ISO 8251:2011. Anodizing of aluminium and its alloys. Measurement of abrasion resistance of anodic oxidation coatings
BS EN ISO 8253-1:1998. Acoustics. Audiometric test methods.Basic pure tone air and bone conduction threshold audiometry
BS EN ISO 8253-1:2010. Acoustics. Audiometric test methodsPure-tone air and bone conduction audiometry
BS EN ISO 8253-2:1998. Acoustics. Audiometric test methods.Sound field audiometry with pure tone and narrow-band test signals
BS EN ISO 8253-2:2009. Acoustics. Audiometric test methodsSound field audiometry with pure-tone and narrow-band test signals
BS EN ISO 8253-3:1998. Acoustics. Audiometric test methods.Speech audiometry
BS EN ISO 8253-3:2012. Acoustics. Audiometric test methodsSpeech audiometry
BS EN ISO 8254-1:2003. Paper and board. Measurement of specular gloss75° gloss with a converging beam, TAPPI method
BS EN ISO 8254-1:2009. Paper and board. Measurement of specular gloss75 degree gloss with a converging beam, TAPPI method
BS EN ISO 8254-2:2003. Paper and board. Measurement of specular gloss75° gloss with a parallel beam, DIN method
BS EN ISO 8256:1997. Plastics. Determination of tensile-impact strength
BS EN ISO 8256:2004. Plastics. Determination of tensile-impact strength
BS EN ISO 8257-1:2006. Plastics. Poly(methyl methacrylate)(PMMA) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 8257-2:2006. Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 8261:2002. Milk and milk products. General guidance for the preparation of test samples, initial suspensions and decimal dilutions for microbiological examination
BS EN ISO 8282:1997. Dental equipment. Mercury and alloy mixers and dispensers
BS EN ISO 8289:2001. Vitreous and porcelain enamels. Low voltage test for detecting and locating defects
BS EN ISO 8290:1998, BS 1344-3:1998. Vitreous and porcelain enamels. Determination of resistance to sulfuric acid at room temperature
BS EN ISO 8292:1995, BS 684-2.22:1992. Animal and vegetable fats and oils. Determination of solid fat content. Pulsed nuclear magnetic resonance method
BS EN ISO 8292-1:2010. Animal and vegetable fats and oils. Determination of solid fat content by pulsed NMRDirect method
BS EN ISO 8292-2:2010. Animal and vegetable fats and oils. Determination of solid fat content by pulsed NMRIndirect method
BS EN ISO 8294:2000. Animal and vegetable fats and oils. Determination of copper, iron and nickel contents. Graphite furnace atomic absorption method
BS EN ISO 8295:2004. Plastics. Film and sheeting. Determination of the coefficients of friction
BS EN ISO 8307:1998. Flexible cellular polymeric materials. Determination of resilience
BS EN ISO 8307:2007. Flexible cellular polymeric materials. Determination of resilience by ball rebound
BS EN ISO 8308:1996. Rubber and plastics hoses and tubing. Determination of transmission of liquids through hose and tubing walls
BS EN ISO 8308:2008. Rubber and plastics hoses and tubing. Determination of transmission of liquids through hose and tubing walls
BS EN ISO 8311:1996. Refrigerated light hydrocarbon fluids. Calibration of membrane tanks and independent prismatic tanks in ships. Physical measurement
BS EN ISO 8316:1997. Method of liquid flow in closed conduits. Method by collection of the liquid in a volumetric tank
BS EN ISO 8317:2004. Child-resistant packaging. Requirements and testing procedures for reclosable packages
BS EN ISO 8318:2002. Packaging. Complete, filled transport packages and unit loads. Sinusoidal vibration tests using a variable frequency
BS EN ISO 8320-1:2003. Contact lenses and contact lens care products. VocabularyContact lenses
BS EN ISO 8320-2:2001, BS 7208-19:2001. Contact lenses and contact lens care products. VocabularyContact lens care products
BS EN ISO 8321-1:1997, BS 7208-1:1992. Optics and optical instruments. Contact lensesSpecification for rigid corneal and scleral contact lenses
BS EN ISO 8321-1:2002. Optics and optical instruments. Contact lensesRigid corneal and scleral contact lenses
BS EN ISO 8321-2:2000, BS 7208-24:2000. Optics and optical instruments. Contact lensesSingle-vision hydrogel contact lenses
BS EN ISO 8325:2004. Dentistry. Test methods for rotary instruments
BS EN ISO 8330:2000. Rubber and plastics hoses and hose assemblies. Vocabulary
BS EN ISO 8330:2008. Rubber and plastics hoses and hose assemblies. Vocabulary
BS EN ISO 8331:2011. Rubber and plastics hoses and hose assemblies. Guidelines for selection, storage, use and maintenance
BS EN ISO 8339:2005. Building construction. Sealants. Determination of tensile properties (extension to break)
BS EN ISO 8340:2005. Building construction. Sealants. Determination of tensile properties at maintained extension
BS EN ISO 835:2007. Laboratory glassware. Graduated pipettes
BS EN ISO 8351-1:1997. Packaging. Method of specification for sacksPaper sacks
BS EN ISO 8351-2:1997. Packaging. Method of specification for sacksSacks made from thermoplastic flexible film
BS EN ISO 8359:1997, BS 5724-2.23:1997. Medical electrical equipment. Oxygen concentrators for medical use. Safety requirements
BS EN ISO 8359:2009+A1:2012. Oxygen concentrators for medical use. Safety requirements
BS EN ISO 8362-1:2004. Injection containers and accessoriesInjection vials made of glass tubing
BS EN ISO 8362-1:2009. Injection containers and accessoriesInjection vials made of glass tubing
BS EN ISO 8362-2:2010. Injection containers and accessoriesClosures for injection vials
BS EN ISO 8362-3:2003. Injection containers and accessoriesAluminium caps for injection vials
BS EN ISO 8362-4:2004. Injection containers and accessoriesInjection vials made of moulded glass
BS EN ISO 8362-4:2011. Injection containers and accessoriesInjection vials made of moulded glass
BS EN ISO 8362-6:2011. Injection containers and accessoriesCaps made of aluminium-plastics combinations for injection vials
BS EN ISO 8362-7:2010. Injection containers and accessoriesInjection caps made of aluminium-plastics combinations without overlapping plastics part
BS EN ISO 8367-1:1997. Packaging. Dimensional tolerances for general purpose sacksPaper sacks
BS EN ISO 8367-2:1997. Packaging. Dimensional tolerances for general purpose sacksSacks made from thermoplastic flexible film
BS EN ISO 8373:1996. Manipulating industrial robots. Vocabulary
BS EN ISO 8381:2000, BS 7142-1:2000. Milk based infant foods. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 8381:2008. Milk-based infant foods. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 8384:2001. Ships and marine technology. Dredgers. Vocabulary
BS EN ISO 8385:1999. Ships and marine technology. Dredgers. Classification
BS EN ISO 8388:2003. Knitted fabrics. Types. Vocabulary
BS EN ISO 8394-1:2010. Building construction. Jointing productsDetermination of extrudability of sealants
BS EN ISO 8394-2:2010. Building construction. Jointing productsDetermination of extrudability of sealants using standardized apparatus
BS EN ISO 8401:1995. Metallic coatings. Review of methods of measurement of ductility
BS EN ISO 8402:1995. Quality management and quality assurance. Vocabulary
BS EN ISO 8403:1995. Metallic coatings. Coatings anodic to the substrate. Rating of test specimens subjected to corrosion tests
BS EN ISO 8420:1995, BS 684-2.45:1991. Animal and vegetable fats and oils. Determination of polar compounds content
BS EN ISO 8420:2002. Animal and vegetable fats and oils. Determination of content of polar compounds
BS EN ISO 8429:1997. Optics and optical instruments. Ophthalmology. Graduated dial scale
BS EN ISO 8434-1:1998. Metallic tube connections for fluid power and general use24° compression fittings
BS EN ISO 8434-1:2007. Metallic tube connections for fluid power and general use24 degree cone connectors
BS EN ISO 8434-4:2000. Metallic tube connections for fluid power and general use24° cone connectors with O-ring weld-on nipples
BS EN ISO 844:2009. Rigid cellular plastics. Determination of compression properties
BS EN ISO 8442-1:1998. Materials and articles in contact with foodstuffs. Cutlery and table hollowareRequirements for cutlery for the preparation of food
BS EN ISO 8442-2:1998. Materials and articles in contact with foodstuffs. Cutlery and table hollowareRequirements for stainless steel and silver-plated cutlery
BS EN ISO 8442-3:1998. Materials and articles in contact with foodstuffs. Cutlery and table hollowareRequirements for silver-plated table and decorative holloware
BS EN ISO 8442-4:1998. Materials and articles in contact with foodstuffs. Cutlery and table hollowareRequirements for gold-plated cutlery
BS EN ISO 8442-5:2004. Materials and articles in contact with foodstuffs. Cutlery and hollowareSpecification for sharpness and edge retention test of cutlery
BS EN ISO 8442-6:2001. Materials and articles in contact with foodstuffs. Cutlery and table hollowareLightly silver plated table holloware protected by laquer
BS EN ISO 8442-7:2001. Materials and articles in contact with foodstuffs. Cutlery and table hollowareRequirements for table cutlery made of silver, other precious metals and their alloys
BS EN ISO 8442-8:2001. Materials and articles in contact with foodstuffs. Cutlery and table hollowareRequirements for silver table and decorative holloware
BS EN ISO 845:1995. Cellular plastics and rubbers. Determination of apparent (bulk) density
BS EN ISO 845:2009. Cellular plastics and rubbers. Determination of apparent density
BS EN ISO 846:1997. Plastics. Evaluation of the action of microorganisms
BS EN ISO 8467:1995, BS 6068-2.32:1995. Water quality. Determination of permanganate index
BS EN ISO 8468:1995. Ship's bridge layout and associated equipment. Requirements and guidelines
BS EN ISO 8469:1995. Small craft. Non-fire-resistant fuel hoses
BS EN ISO 8469:2006. Small craft. Non-fire-resistant fuel hoses
BS EN ISO 8469:2013. Small craft. Non-fire-resistant fuel hoses
BS EN ISO 8491:2004. Metallic materials. Tube (in full section). Bend test
BS EN ISO 8492:2004. Metallic materials. Tube. Flattening test
BS EN ISO 8493:2004. Metallic materials. Tube. Drift-expanding test (ISO 8493:1998)
BS EN ISO 8494:2004. Metallic materials. Tube. Flanging test
BS EN ISO 8495:2004. Metallic materials. Tube. Ring-expanding test
BS EN ISO 8496:2004. Metallic materials. Tube. Ring tensile test
BS EN ISO 8497:1997. Thermal insulation. Determination of steady-state thermal transmission properties of thermal insulation for circular pipes
BS EN ISO 8501-1:2001. Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanlinessRust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
BS EN ISO 8501-1:2007. Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanlinessRust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
BS EN ISO 8501-1:Supplement:2001, BS 7079-A1:Supplement 1:1996. Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanlinessRepresentative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives
BS EN ISO 8501-2:2001, BS 7079-A2:1996. Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanlinessPreparation grades of previously coated steel substrates after localized removal of previous coatings
BS EN ISO 8501-3:2007, BS 7079-A3:2006. Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanlinessPreparation grades of welds, edges and other areas with surface imperfections
BS EN ISO 8501-4:2006. Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanlinessInitial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting
BS EN ISO 8502-10:2004, BS 7079-B10:2004. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanlinessField method for the titrimetric determination of water-soluble chloride
BS EN ISO 8502-11:2006, BS 7079-B11:2006. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanlinessField method for the turbidimetric determination of water-soluble sulfate
BS EN ISO 8502-12:2004, BS 7079-B12:2004. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanlinessField method for the titrimetric determination of water-soluble ferrous ions
BS EN ISO 8502-2:2000. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanlinessLaboratory determination of chloride on cleaned surfaces
BS EN ISO 8502-2:2005. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanlinessLaboratory determination of chloride on cleaned surfaces
BS EN ISO 8502-3:2000. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanlinessAssessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
BS EN ISO 8502-4:2000. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanlinessGuidance on the estimation of the probability of condensation prior to paint application
BS EN ISO 8502-5:2004, 7079-B5:2004. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanlinessMeasurement of chloride on steel surfaces prepared for painting (ion detection tube method)
BS EN ISO 8502-6:2000. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanlinessExtraction of soluble contaminants for analysis. The Bresle method
BS EN ISO 8502-6:2006. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanlinessExtraction of soluble contaminants for analysis. The Bresle method
BS EN ISO 8502-8:2004, BS 7079-B8:2004. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanlinessField method for the refractometric determination of moisture
BS EN ISO 8502-9:2001, BS 7079-B9:1998. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanlinessField method for the conductometric determination of water-soluble salts
BS EN ISO 8503-1:1995, BS 7079-C1:1989. Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substratesSpecifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
BS EN ISO 8503-1:2012. Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substratesSpecifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
BS EN ISO 8503-2:1995, BS 7079-C2:1989. Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substratesMethod for the grading of surface profile of abrasive blast-cleaned steel. Comparator procedure
BS EN ISO 8503-2:2012. Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substratesMethod for the grading of surface profile of abrasive blast-cleaned steel. Comparator procedure
BS EN ISO 8503-3:1995, BS 7079-C3:1989. Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substratesMethod for the calibration of ISO surface profile comparators and for the determination of surface profile. Focusing microscope procedure
BS EN ISO 8503-3:2012. Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substratesMethod for the calibration of ISO surface profile comparators and for the determination of surface profile. Focusing microscope procedure
BS EN ISO 8503-4:1995, BS 7079-C4:1989. Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substratesMethod for the calibration of ISO surface profile comparators and for the determination of surface profile. Stylus instrument procedure
BS EN ISO 8503-4:2012. Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substratesMethod for the calibration of ISO surface profile comparators and for the determination of surface profile. Stylus instrument procedure
BS EN ISO 8503-5:2004, BS 7079-C5:2004. Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substratesReplica tape method for the determination of the surface profile
BS EN ISO 8504-1:2001, BS 7079-D1:2000. Preparation of steel substrates before application of paints and related products. Surface preparation methodsGeneral principles
BS EN ISO 8504-2:2001, BS 7079-D2:2000. Preparation of steel substrates before application of paints and related products. Surface preparation methodsAbrasive blast cleaning
BS EN ISO 8504-3:2001, BS 7079-D3:1993. Preparation of steel substrates before application of paints and related products. Surface preparation methodsHand- and power-tool cleaning
BS EN ISO 8510-2:2010. Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly180 degree peel
BS EN ISO 8534:2008. Animal and vegetable fats and oils. Determination of water content. Karl Fischer method (pyridine free)
BS EN ISO 8536-1:1999. Infusion equipment for medical useInfusion glass bottles
BS EN ISO 8536-1:2003. Infusion equipment for medical useInfusion glass bottles
BS EN ISO 8536-1:2008. Infusion equipment for medical useInfusion glass bottles
BS EN ISO 8536-1:2011. Infusion equipment for medical useInfusion glass bottles
BS EN ISO 8536-10:2004. Infusion equipment for medical useAccessories for fluid lines for use with pressure infusion equipment
BS EN ISO 8536-11:2004. Infusion equipment for medical useInfusion filters for use with pressure infusion equipment
BS EN ISO 8536-2:1999. Infusion equipment for medical useClosures for infusion bottles
BS EN ISO 8536-2:2002. Infusion equipment for medical useClosures for infusion bottles
BS EN ISO 8536-2:2010. Infusion equipment for medical useClosures for infusion bottles
BS EN ISO 8536-3:1999. Infusion equipment for medical useAluminium caps for infusion bottles
BS EN ISO 8536-3:2009. Infusion equipment for medical useAluminium caps for infusion bottles
BS EN ISO 8536-4:2004. Infusion equipment for medical useInfusion sets for single use, gravity feed
BS EN ISO 8536-4:2007. Infusion equipment for medical useInfusion sets for single use, gravity feed
BS EN ISO 8536-4:2010. Infusion equipment for medical useInfusion sets for single use, gravity feed
BS EN ISO 8536-4:2013+A1:2013. Infusion equipment for medical useInfusion sets for single use, gravity feed
BS EN ISO 8536-5:2011. Infusion equipment for medical useBurette infusion sets for single use, gravity feed
BS EN ISO 8536-5:2013. Infusion equipment for medical useBurette infusion sets for single use, gravity feed
BS EN ISO 8536-8:2004. Infusion equipment for medical useInfusion equipment for use with pressure infusion apparatus
BS EN ISO 8536-9:2004. Infusion equipment for medical useFluid lines for use with pressure infusion equipment
BS EN ISO 8537:1995. Sterile, single-use syringes, with or without needle, for insulin
BS EN ISO 8537:2008. Sterile single-use syringes, with or without needle, for insulin
BS EN ISO 8560:1999. Construction drawings. Representation of modular sizes, lines and grids
BS EN ISO 8561:1996. Household refrigerating appliances. Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by forced air circulation. Characteristics and test methods
BS EN ISO 8565:1995. Metals and alloys. Atmospheric corrosion testing. General requirements for field tests
BS EN ISO 8565:2011. Metals and alloys. Atmospheric corrosion testing. General requirements
BS EN ISO 8580:1995. Rubber and plastics hoses. Determination of ultra-violet resistance under static conditions
BS EN ISO 8583:1995. Financial transaction card originated messages. Interchange message specifications
BS EN ISO 8583-2:1999. Financial transaction card originated messages. Interchange message specificationsApplication and registration procedures for institution identification codes (IIC)
BS EN ISO 8583-3:1998. Financial transaction card originated messages. Interchange message specificationsMaintenance procedures for codes
BS EN ISO 8586-2:2008. Sensory analysis. General guidance for the selection, training and monitoring of assessorsExpert sensory assessors
BS EN ISO 8589:2010. Sensory analysis. General guidance for the design of test rooms
BS EN ISO 8596:1996, BS 4274-2:1996. Visual acuity test types. Specification for Landolt ring optotype for non-clinical purposes
BS EN ISO 8596:2009. Ophthalmic optics. Visual acuity testing. Standard optotype and its presentation
BS EN ISO 8597:1996, BS 4274-3:1996. Visual acuity test types. Method for correlating optotypes used for non-clinical purposes
BS EN ISO 8598:1998. Optics and optical instruments. Focimeters
BS EN ISO 8599:1997, BS 7208-4:1997. Optics and optical instruments. Contact lenses. Determination of the spectral and luminous transmittance
BS EN ISO 8611-1:2004. Pallets for materials handling. Flat pallets.Test methods
BS EN ISO 8611-1:2012. Pallets for materials handling. Flat palletsTest methods
BS EN ISO 8611-2:2012. Pallets for materials handling. Flat palletsPerformance requirements and selection of tests
BS EN ISO 8611-3:2012. Pallets for materials handling. Flat palletsMaximum working loads
BS EN ISO 8612:2001. Ophthalmic instruments. Tonometers
BS EN ISO 8612:2009. Ophthalmic instruments. Tonometers
BS EN ISO 8618:1995, BS 2782-4:Method 451M. Plastics. Liquid phenolic resins. Conventional determination of non-volatile matter
BS EN ISO 8618:1998, BS 2782-4:Method 451M:1998. Plastics. Liquid phenolic resins. Conventional determination of non-volatile matter
BS EN ISO 8619:1996, BS 2782-8:Method 835H. Plastics. Phenolic resin powder. Determination of flow distance on a glass plate
BS EN ISO 8619:1998, BS 2782-8:Method 835H:1998. Plastics. Phenolic resin powder. Determination of flow distance on a heated glass plate
BS EN ISO 8619:2004. Plastics. Phenolic resin powder. Determination of flow distance on a heated glass plate
BS EN ISO 862:1995. Glossary of terms for surface active agents
BS EN ISO 8620:1996, BS 2782-4:Method 451S:1996. Plastics. Phenolic resin powder. Sieve analysis using air-jet sieve apparatus
BS EN ISO 8623:2010. Tall-oil fatty acids for paints and varnishesSpecifications and test methods
BS EN ISO 8624:1997, ISO 8624:1991. Optics and optical instruments. Ophthalmic optics. Measuring system for spectacle frames
BS EN ISO 8624:2002. Ophthalmic optics. Spectacle frames. Measuring system and terminology
BS EN ISO 8624:2011. Ophthalmic optics. Spectacle frames. Measuring system and terminology
BS EN ISO 8655-1:2002. Piston-operated volumetric apparatusTerminology, general requirements and user recommendations
BS EN ISO 8655-2:2002. Piston-operated volumetric apparatusPiston pipettes
BS EN ISO 8655-3:2002. Piston-operated volumetric apparatusPiston burettes
BS EN ISO 8655-4:2002. Piston-operated volumetric apparatusDilutors
BS EN ISO 8655-5:2002. Piston-operated volumetric apparatusDispensers
BS EN ISO 8655-6:2002. Piston-operated volumetric apparatusGravimetric methods for the determination of measurement error
BS EN ISO 8655-7:2005. Piston-operated volumetric apparatusNon-gravimetric methods for the assessment of equipment performance
BS EN ISO 8662-10:1998. Hand-held portable power tools. Measurement of vibrations at the handleNibblers and shears
BS EN ISO 8662-12:1997. Hand-held portable power tools. Measurement of vibrations at the handleSaws and files with reciprocating action and saws with rotating or oscillating action
BS EN ISO 8662-13:1997. Hand-held portable power tools. Measurement of vibrations at the handleDie grinders
BS EN ISO 8662-14:1997. Hand-held portable power tools. Measurement of vibrations at the handleStone-working tools and needle scalers
BS EN ISO 8662-4:1995, ISO 8662-4:1994. Hand-held portable power tools. Measurement of vibrations at the handleGrinding machines
BS EN ISO 8662-6:1995, ISO 8662-6:1994. Hand-held portable power tools. Measurement of vibrations at the handleImpact drills
BS EN ISO 8662-7:1997. Hand-held portable power tools. Measurement of vibrations at the handleWrenches, screwdrivers and nut runners with impact, impulse or ratchet action
BS EN ISO 8662-8:1997. Hand-held portable power tools. Measurement of vibrations at the handlePolishers and rotary, orbital and random orbital sanders
BS EN ISO 8662-9:1997. Hand-held portable power tools. Measurement of vibrations at the handleRammers
BS EN ISO 8665:1996. Small craft. Marine propulsion engines and systems. Power measurements and declarations
BS EN ISO 8665:2006. Small craft. Marine propulsion reciprocating internal combustion engines. Power measurements and declarations
BS EN ISO 8666:2002. Small craft. Principal data
BS EN ISO 8669-2:1997. Urine collection bagsRequirements and test methods
BS EN ISO 8670-2:1997. Ostomy collection bagsRequirements and test methods
BS EN ISO 8673:2001. Hexagon nuts, style 1, with metric fine pitch thread. Product grades A and B
BS EN ISO 8673:2012. Hexagon regular nuts (style 1) with metric fine pitch thread. Product grades A and B
BS EN ISO 8674:2001. Hexagon nuts, style 2, with metric fine pitch thread. Product grades A and B
BS EN ISO 8674:2012. Hexagon high nuts (style 2) with metric fine pitch thread. Product grades A and B
BS EN ISO 8675:2001. Hexagon thin nuts (chamfered) with metric fine pitch thread. Product grades A and B
BS EN ISO 8675:2012. Hexagon thin nuts chamfered (style 0) with metric fine pitch thread. Product grades A and B
BS EN ISO 8676:2001. Hexagon head screws with metric fine pitch thread. Product grades A and B
BS EN ISO 8676:2011. Hexagon head screws with metric fine pitch thread. Product grades A and B
BS EN ISO 868:1998. Plastics and ebonite. Determination of indentation hardness by means of a a durometer (Shore hardness)
BS EN ISO 868:2003. Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
BS EN ISO 8689-1:2000, BS 6068-5.26:2000. Water quality. Biological classification of riversGuidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates
BS EN ISO 8689-2:2000, BS 6068-5.27:2000. Water quality. Biological classification of riversGuidance on the presentation of biological quality data from surveys of benthic macroinvertebrates
BS EN ISO 8692:2004, BS 6068-5.10:2004. Water quality. Freshwater algal growth inhibition test with unicellular green algae
BS EN ISO 8692:2012. Water quality. Fresh water algal growth inhibition test with unicellular green algae
BS EN ISO 8728:1995, ISO 8728:1987. Specification for marine gyro-compasses
BS EN ISO 8728:1999. Ships and marine technology. Marine gyro-compasses
BS EN ISO 8729:1995, ISO 8729:1987. Specification for marine radar reflectors
BS EN ISO 8729:1999. Ships and marine technology. Marine radar reflectors
BS EN ISO 8733:1998. Parallel pins with internal thread, of unhardened steel or austenitic stainless steel
BS EN ISO 8734:1998. Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins)
BS EN ISO 8735:1998. Parallel pins with internal thread, of hardened steel or martensitic stainless steel
BS EN ISO 8739:1998. Grooved pins. Full-length parallel grooved, with pilot
BS EN ISO 8740:1998. Grooved pins. Full-length parallel grooved, with chamfer
BS EN ISO 8741:1998. Grooved pins. Half-length reverse-taper grooved
BS EN ISO 8742:1998. Grooved pins. One-third-length centre grooved
BS EN ISO 8743:1998. Grooved pins. Half-length centre grooved
BS EN ISO 8744:1998. Grooved pins. Full-length taper grooved
BS EN ISO 8745:1998. Grooved pins. Half-length taper grooved
BS EN ISO 8746:1998. Grooved pins with round head
BS EN ISO 8747:1998. Grooved pins with countersunk head
BS EN ISO 8748:1998. Spring-type straight pins. Coiled, heavy duty
BS EN ISO 8748:2007. Spring-type straight pins. Coiled, heavy duty
BS EN ISO 8750:1998. Spring-type straight pins. Coiled, standard duty
BS EN ISO 8750:2007. Spring-type straight pins. Coiled, standard duty
BS EN ISO 8751:1998. Spring-type straight pins. Coiled, light duty
BS EN ISO 8751:2007. Spring-type straight pins. Coiled, light duty
BS EN ISO 8752:1998. Spring-type straight pins. Slotted, heavy duty
BS EN ISO 8752:2009. Spring-type straight pins. Slotted, heavy duty
BS EN ISO 8754:1995, BS 2000-336:1995,ISO 8754:1992. Methods of test for petroleum and its products. Petroleum products. Determination of sulfur content. Energy-dispersive X-ray fluorescence method
BS EN ISO 8754:2003, BS 2000-336:2003. Petroleum products. Determination of sulfur content. Energy-dispersive X-ray fluorescence spectrometry
BS EN ISO 8765:2001. Hexagon head bolts with metric fine pitch thread. Product grades A and B
BS EN ISO 8765:2011. Hexagon head bolts with metric fine pitch thread. Product grades A and B
BS EN ISO 877:1997, BS 2782-5:Method 550B:1996. Plastics. Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors.
BS EN ISO 877-1:2010. Plastics. Methods of exposure to solar radiationGeneral guidance
BS EN ISO 877-2:2010. Plastics. Methods of exposure to solar radiationDirect weathering and exposure behind window glass
BS EN ISO 877-3:2010. Plastics. Methods of exposure to solar radiationIntensified weathering using concentrated solar radiation
BS EN ISO 8780-1:1995. Pigments and extenders. Methods of dispersion for assessment of dispersion characteristicsIntroduction
BS EN ISO 8780-2:1995. Pigments and extenders. Methods of dispersion for assessment of dispersion characteristicsDispersion using an oscillatory shaking machine
BS EN ISO 8780-3:1995. Pigments and extenders. Methods of dispersion for assessment of dispersion characteristicsDispersion using a high speed impeller mill
BS EN ISO 8780-4:1995. Pigments and extenders. Methods of dispersion for assessment of dispersion characteristicsDispersion using a bead mill
BS EN ISO 8780-5:1995. Pigments and extenders. Methods of dispersion for assessment of dispersion characteristicsDispersion using an automatic muller
BS EN ISO 8780-6:1995. Pigments and extenders. Methods of dispersion for assessment of dispersion characteristicsDispersion using a triple-roll mill
BS EN ISO 8781-1:1995. Pigments and extenders. Methods of assessment of dispersion characteristicsAssessment from the charge in tinting strength of coloured pigments
BS EN ISO 8781-2:1995. Pigments and extenders. Methods of assessment of dispersion characteristicsAssessment from the change in fineness of grind
BS EN ISO 8781-3:1995. Pigments and extenders. Methods of assessment of dispersion characteristicsAssessment from the change in gloss
BS EN ISO 8785:1999. Geometrical product specification (GPS). Surface imperfections. Terms, definitions and parameters
BS EN ISO 8795:2001. Plastics piping systems for the transport of water intended for human consumption. Migration assessment. Determination of migration values of plastics pipes and fittings and their joints
BS EN ISO 8799:1996. Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulfates. Method for determination of unsulfated matter content
BS EN ISO 8799:2009. Surface active agents. Sulfated ethoxylated alcohols and alkylphenols. Determination of content of unsulfated matter
BS EN ISO 8819:1995, BS 2000-401:1995,ISO 8819:1993. Methods of test for petroleum and its products. Liquefied petroleum gases. Detection of hydrogen sulfide. Lead acetate method
BS EN ISO 8826-1:1995, BS 308-1.12:1995. Technical drawings. Roller bearingsGeneral simplified representation
BS EN ISO 8826-2:1997, BS 308-1.13:1997. Technical drawings. Roller bearingsDetailed simplified representation
BS EN ISO 8835-2:2007. Inhalational anaesthesia systemsAnaesthetic breathing systems
BS EN ISO 8835-2:2009. Inhalational anaesthesia systemsAnaesthetic breathing systems (ISO 8835-2:2007)
BS EN ISO 8835-3:2009+A1:2010. Inhalational anaesthesia systemsTransfer and receiving systems of active anaesthetic gas scavenging systems
BS EN ISO 8835-4:2004. Inhalational anaesthesia systemsAnaesthetic vapour delivery devices
BS EN ISO 8835-4:2009. Inhalational anaesthesia systemsAnaesthetic vapour delivery devices
BS EN ISO 8835-5:2004. Inhalational anaesthesia systemsAnaesthetic ventilators
BS EN ISO 8835-5:2009. Inhalational anaesthesia systemsAnaesthesia ventilators
BS EN ISO 8836:2008. Suction catheters for use in the respiratory tract
BS EN ISO 8836:2009. Suction catheters for use in the respiratory tract
BS EN ISO 8849:2003. Small craft. Electrically operated direct-current bilge-pumps
BS EN ISO 8861:1998. Shipbuilding. Engine-room ventilation in diesel-engined ships. Design requirements and basis of calculations
BS EN ISO 887:2000. Plain washers for metric bolts, screws and nuts for general purposes. General plan
BS EN ISO 8871:1997. Elastomeric parts for aqueous parenteral preparations
BS EN ISO 8871-1:2004. Elastomeric parts for parenterals and for devices for pharmaceutical useExtractables in aqueous autoclavates
BS EN ISO 8871-2:2004. Elastomeric parts for parenterals and for devices for pharmaceutical useIdentification and characterization
BS EN ISO 8871-3:2004. Elastomeric parts for parenterals and for devices for pharmaceuticals useDetermination of released-particle count
BS EN ISO 8871-4:2006. Elastomeric parts for parenterals and for devices for pharmaceutical useBiological requirements and test methods
BS EN ISO 8872:2003. Aluminium caps for transfusion, infusion and injection bottles. General requirements and test methods
BS EN ISO 8891:1995. Dental casting alloys with noble metal content of 25% up to but not including 75%
BS EN ISO 8891:2000. Dental casting alloys with noble metal content of at least 25% but less than 75%
BS EN ISO 8892:1995, BS 4325-10:1995. Oilseed residues. Determination of total residual hexane
BS EN ISO 8894-1:2010. Refractory materials. Determination of thermal conductivityHot-wire methods (cross-array and resistance thermometer)
BS EN ISO 8895:2006. Shaped insulating refractory products. Determination of cold crushing strength
BS EN ISO 8936:2009. Awnings for leisure accommodation vehicles. Requirements and test methodsRequirements and test methods
BS EN ISO 8968-1:2002. Milk. Determination of nitrogen contentKjeldahl method
BS EN ISO 8968-2:2002. Milk. Determination of nitrogen contentBlock-digestion method (Macro method)
BS EN ISO 8968-3:2007. Milk. Determination of nitrogen contentBlock-digestion method (Semi-micro rapid routine method)
BS EN ISO 8968-4:2002. Milk. Determination of nitrogen contentDetermination of non-protein nitrogen content
BS EN ISO 8968-5:2002. Milk. Determination of nitrogen contentDetermination of protein-nitrogen content
BS EN ISO 8970:2010. Timber structures. Testing of joints made with mechanical fasteners. Requirements for wood density
BS EN ISO 8973:1999, BS 2000-432:1999. Liquefied petroleum gases. Calculation method for density and vapour pressure
BS EN ISO 8974:1995, BS 2782-4:Method 451R. Plastics. Phenolic resins. Determination of residual phenol content by gas chromatography
BS EN ISO 8974:1999, BS 2782-4:Method 451R:1999. Plastics. Phenolic resins. Determination of residual phenol content by gas chromatography
BS EN ISO 8974:2002. Plastics. Phenolic resins. Determination of residual phenol content by gas chromatography
BS EN ISO 8975:1995, BS 2782-4:Method 451K. Plastics. Phenolic resins. Determination of pH
BS EN ISO 8980-1:1997, BS 2738-6:1996. Ophthalmic optics. Uncut finished spectacle lensesSpecifications for single-vision and multifocal lenses
BS EN ISO 8980-1:2004, BS 2738-6:2004. Ophthalmic optics. Uncut finished spectacle lensesSpecifications for single-vision and multifocal lenses
BS EN ISO 8980-2:1997, BS 2738-7:1996. Ophthalmic optics. Uncut finished spectacle lensesSpecifications for progressive power lenses
BS EN ISO 8980-2:2004, BS 2738-7:2004. Ophthalmic optics. Uncut finished spectacle lensesSpecifications for progressive power lenses
BS EN ISO 8980-3:1999, BS 2738-9:1999. Ophthalmic optics. Uncut finished spectacle lensesTransmittance specifications and test methods
BS EN ISO 8980-3:2004. Ophthalmic optics. Uncut finished spectacle lensesTransmittance specifications and test methods
BS EN ISO 8980-4:2000, BS 2738-10:2000. Ophthalmic optics. Uncut finished spectacle lensesSpecifications and test methods for anti-reflective coatings
BS EN ISO 8980-4:2006. Ophthalmic optics. Uncut finished spectacle lensesSpecifications and test methods for anti-reflective coatings
BS EN ISO 8980-5:2005. Ophthalmic optics. Uncut finished spectacle lensesMinimum requirements for spectacle lens surfaces claimed to be abrasion-resistant
BS EN ISO 898-1:1999. Mechanical properties of fasteners made of carbon steel and alloy steelBolts, screws and studs
BS EN ISO 898-1:2009. Mechanical properties of fasteners made of carbon steel and alloy steelBolts, screws and studs with specified property classes. Coarse thread and fine pitch thread
BS EN ISO 898-1:2013. Mechanical properties of fasteners made of carbon steel and alloy steelBolts, screws and studs with specified property classes. Coarse thread and fine pitch thread
BS EN ISO 898-2:2012. Mechanical properties of fasteners made of carbon steel and alloy steelNuts with specified property classes. Coarse thread and fine pitch thread
BS EN ISO 8985:1998. Plastics. Ethylene/vinyl acetate copolymer (EVAC) thermoplastics. Determination of vinyl acetate content
BS EN ISO 898-5:1999. Mechanical properties of fasteners made of carbon steel and alloy steelSet screws and similar threaded fasteners not under tensile stresses
BS EN ISO 898-5:2012. Mechanical properties of fasteners made of carbon steel and alloy steelSet screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread
BS EN ISO 898-6:1996. Mechanical properties of fastenersNuts with specified proof load values. Fine pitch thread
BS EN ISO 8986-1:1999. Plastics. Polybutene (PB) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 8986-1:2009. Plastics. Polybutene-1 (PB-1) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 8986-2:1996. Plastics. Polybutene (PB) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 8986-2:2009. Plastics. Polybutene-1 (PB-1) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 8987:1996, BS 2782-8:Methods 835I & J. Plastics. Phenolic resins. Determination of reactivity on a B-transformation test plate
BS EN ISO 8987:1998, BS 2782-8:Methods 835I & J. Plastics. Phenolic resins. Determination of reactivity on a B-transformation test plate
BS EN ISO 8987:2005. Plastics. Phenolic resins. Determination of reactivity on aB-transformat ion test plate
BS EN ISO 8988:1997, BS 2782-4:Methods 451X & 451Y. Plastics. Phenolic resins. Determination of hexamethylenetetramine content. Kjeldahl method and perchloric acid method
BS EN ISO 8988:2006. Plastics. Phenolic resins. Determination of hexamethylene-tetramine content. Kjeldahl method, perchloric acid method and hydrochloric acid method
BS EN ISO 8989:1995, BS 2782-4:Method 451T. Plastics. Liquid phenolic resins. Determination of water miscibility
BS EN ISO 8989:1998, BS 2782-4:Method 451T:1998. Plastics. Liquid phenolic resins. Determination of water miscibility
BS EN ISO 8990:1996. Thermal insulation. Determination of steady-state thermal transmission properties. Calibrated and guarded hot box
BS EN ISO 899-1:1997, BS 2782-3:Method 324A:1997. Plastics. Determination of creep behaviourTensile creep
BS EN ISO 899-1:2003. Plastics. Determination of creep behaviourTensile creep
BS EN ISO 899-2:1997, BS 2782-3:Method 324B:1997. Plastics. Determination of creep behaviourFlexural creep by three-point loading
BS EN ISO 899-2:2003. Plastics. Determination of creep behaviourFlexural creep by three-point loading
BS EN ISO 8993:2010. Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Chart method
BS EN ISO 8994:2011. Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Grid method
BS EN ISO 8996:2004. Ergonomics of the thermal environment. Determination of metabolic rate
BS EN ISO 9000:2000. Quality management systems. Fundamentals and vocabulary
BS EN ISO 9000:2005. Quality management systems. Fundamentals and vocabulary
BS EN ISO 9000-1:1994. Quality management and quality assurance standardsGuidelines for selection and use
BS EN ISO 9000-3:1997. Quality management and quality assurance standardsGuidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software
BS EN ISO 9001:1994. Quality systems. Model for quality assurance in design, development, production, installation and servicing
BS EN ISO 9001:2000 (A5 Laminated). Quality management systems. Requirements
BS EN ISO 9001:2008
BS EN ISO 9001:2008. Quality management systems. Requirements
BS EN ISO 9002:1994. Quality systems. Model for quality assurance in production, installation and servicing
BS EN ISO 9003:1994. Quality systems. Model for quality assurance in final inspection and test
BS EN ISO 9004:2000. Quality management systems. Guidelines for performance improvements
BS EN ISO 9004:2009. Managing for the sustained success of an organization. A quality management approach
BS EN ISO 9004-1:1994. Quality management and quality assurance standards. Guidelines
BS EN ISO 90-1:1999. Light gauge metal containers. Definitions and determination of dimensions and capacitiesOpen-top cans
BS EN ISO 9012:2011. Gas welding equipment. Air-aspirated hand blowpipes. Specifications and tests
BS EN ISO 9013:1995. Welding and allied processes. Quality classification and dimensional tolerances of thermally cut (oxygen/fuel gas flame) surfaces
BS EN ISO 9013:2002. Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances
BS EN ISO 9015-1:2011. Destructive tests on welds in metallic materials. Hardness testingHardness test on arc welded joints
BS EN ISO 9015-2:2011. Destructive tests on welds in metallic materials. Hardness testingMicrohardness testing of welded joints
BS EN ISO 9016:2011. Destructive tests on welds in metallic materialsImpact tests. Test specimen location, notch orientation and examination
BS EN ISO 9016:2012. Destructive tests on welds in metallic materials. Impact tests. Test specimen location, notch orientation and examination
BS EN ISO 9018:2003. Destructive tests on welds in metallic materials. Tensile test on cruciform and lapped joints
BS EN ISO 90-2:1999. Light gauge metal containers. Definitions and determination of dimensions and capacitiesGeneral use containers
BS EN ISO 9020:1998, BS 6782-7:1996. Binders for paints and varnishes. Determination of free-formaldehyde content of amino resins. Sodium sulfite titrimetric method
BS EN ISO 9029:1995. Crude petroleum. Determination of water. Distillation method
BS EN ISO 9029:1997, BS 2000-358:1997,ISO 9029:1990. Methods of test for petroleum and its products. Crude petroleum. Determination of water. Distillation method
BS EN ISO 90-3:2001. Light gauge metal containers. Definitions and determination of dimensions and capacitiesLight gauge metal containers. Definitions and determination of dimensions and capacities. Aerosol cans
BS EN ISO 9038:2003. Test for sustained combustibility of liquids
BS EN ISO 9038:2013, BS 2000-602:2013. Determination of sustained combustibility of liquids
BS EN ISO 9046:2004. Building construction. Jointing products. Determination of adhesion/cohesion properties of sealants at constant temperature
BS EN ISO 9047:1998. Building construction. Sealants. Determination of adhesion/cohesion properties at variable temperatures
BS EN ISO 9047:2003. Building construction. Jointing products. Determination of adhesion/cohesion properties of sealants at variable temperatures
BS EN ISO 9054:1999. Cellular plastics, rigid. Test methods for self-skinned high-density materials
BS EN ISO 9073-10:2004. Textiles. Test methods for nonwovensLint and other particles generation in the dry state
BS EN ISO 9073-13:2007. Textiles. Test methods for nonwovensRepeated liquid strike-through time
BS EN ISO 9073-14:2007. Textiles. Test methods for nonwovensCoverstock wetback
BS EN ISO 9073-15:2008. Textiles. Test methods for nonwovensDetermination of air permeability
BS EN ISO 9073-16:2008. Textiles. Test methods for nonwovensDetermination of resistance to penetration by water (hydrostatic pressure)
BS EN ISO 9073-17:2008. Textiles. Test methods for nonwovensDetermination of water penetration (spray impact)
BS EN ISO 9073-18:2008. Textiles. Test methods for nonwovensDetermination of breaking strength and elongation of nonwoven materials using the grab tensile test
BS EN ISO 9073-2:1997. Textiles. Test methods for nonwovensDetermination of thickness
BS EN ISO 9073-4:1997. Textiles. Test methods for nonwovensDetermination of tear resistance
BS EN ISO 9073-5:2008. Textiles. Test methods for nonwovensDetermination of resistance to mechanical penetration (ball burst procedure)
BS EN ISO 9073-6:2003. Textiles. Test methods for nonwovensAbsorption
BS EN ISO 9073-7:1998. Textiles. Test methods for nonwovensDetermination of bending length
BS EN ISO 9073-8:1998. Textiles. Test methods for nonwovensDetermination of liquid strike-through time (simulated urine)
BS EN ISO 9073-9:1998. Textiles. Test methods for nonwovensDetermination of drape coefficient
BS EN ISO 9073-9:2008. Textiles. Test methods for nonwovensDetermination of drapability including drape coefficient
BS EN ISO 9080:2003. Plastics piping and ducting systems. Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
BS EN ISO 9080:2012. Plastics piping and ducting systems. Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
BS EN ISO 9092:2011. Textiles. Nonwovens. Definition
BS EN ISO 9093-1:1998. Small craft. Seacocks and through-hull fittingsMetallic
BS EN ISO 9093-2:2002. Small craft. Seacocks and through-hull fittingsNon-metallic
BS EN ISO 9094-1:2003. Small craft. Fire protectionCraft with a hull length of up to and including 15 m
BS EN ISO 9094-2:2002. Small craft. Fire protectionCraft with a hull length of over 15 m
BS EN ISO 9097:1995. Small craft. Electric fans
BS EN ISO 9100-1:2005. Glass containers. Vacuum lug finishesGeneral
BS EN ISO 9100-10:2005. Glass containers. Vacuum lug finishes77 regular
BS EN ISO 9100-11:2005. Glass containers. Vacuum lug finishes82 regular
BS EN ISO 9100-12:2005. Glass containers. Vacuum lug finishes89 regular
BS EN ISO 9100-13:2005. Glass containers. Vacuum lug finishes100 regular
BS EN ISO 9100-14:2005. Glass containers. Vacuum lug finishes110 regular
BS EN ISO 9100-2:2005. Glass containers. Vacuum lug finishes33 medium
BS EN ISO 9100-3:2005. Glass containers. Vacuum lug finishes38 regular
BS EN ISO 9100-4:2005. Glass containers. Vacuum lug finishes38 medium
BS EN ISO 9100-5:2005. Glass containers. Vacuum lug finishes43 and 48 regular
BS EN ISO 9100-6:2005. Glass containers. Vacuum lug finishes53 and 58 regular
BS EN ISO 9100-7:2005. Glass containers. Vacuum lug finishes58 deep
BS EN ISO 9100-8:2005. Glass containers. Vacuum lug finishes63, 66 and 70 regular
BS EN ISO 9100-9:2005. Glass containers. Vacuum lug finishes63, 66 and 70 deep
BS EN ISO 9117-1:2009. Paints and varnishes. Drying testsDetermination of through-dry state and through-dry time
BS EN ISO 9117-2:2010. Paints and varnishes. Drying testsPressure test for stackability
BS EN ISO 9117-3:2010. Paints and varnishes. Drying testsSurface-drying test using ballotini
BS EN ISO 9117-4:2012. Paints and varnishes. Drying testsTest using a mechanical recorder
BS EN ISO 9117-5:2012. Paints and varnishes. Drying testsModified Bandow-Wolff test
BS EN ISO 9117-6:2012. Paints and varnishes. Drying testsPrint-free test
BS EN ISO 9142:2003. Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BS EN ISO 9163:1999. Textile glass. Rovings. Manufacture of test specimens and determination of tensile strength of impregnated rovings
BS EN ISO 9163:2005. Textile glass. Rovings. Manufacture of test specimens and determination of tensile strength of impregnated rovings
BS EN ISO 9167-1:1995+A1:2013, BS 4289-9:1993. Rapeseed. Determination of glucosinolates contentMethod using high-performance liquid chromatography
BS EN ISO 9167-2:1997, BS 4289-12:1995. Rapeseed. Determination of glucosinolates contentMethod using X-ray fluorescence spectrometry
BS EN ISO 9168:2009. Dentistry. Hose connectors for air driven dental handpieces
BS EN ISO 9169:2006. Air quality. Definition and determination of performance characteristics of an automatic measuring system
BS EN ISO 9170-1:2008. Terminal units for medical gas pipeline systemsTerminal units for use with compressed medical gases and vacuum
BS EN ISO 9170-2:2008. Terminal units for medical gas pipeline systemsTerminal units for anaesthetic gas scavenging systems
BS EN ISO 9173-1:1996. Dental extraction forcepsScrew and pin joint types
BS EN ISO 9173-1:2006. Dentistry. Extraction forcepsGeneral requirements and test methods
BS EN ISO 9173-2:2010. Dentistry. Extraction forcepsDesignation
BS EN ISO 9185:2007. Protective clothing. Assessment of resistance of materials to molten metal splash
BS EN ISO 9187-1:1999. Injection equipment for medical useAmpoules for injectables
BS EN ISO 9187-1:2003. Injection equipment for medical useAmpoules for injectables
BS EN ISO 9187-1:2008. Injection equipment for medical useAmpoules for injectables
BS EN ISO 9187-1:2010. Injection equipment for medical useAmpoules for injectables
BS EN ISO 9187-2:1999. Injection equipment for medical useOne-point-cut (OPC) ampoules
BS EN ISO 9187-2:2010. Injection equipment for medical useOne-point-cut (OPC) ampoules
BS EN ISO 9220:1995. Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
BS EN ISO 9222-1:1995, BS 308-1.14:1995. Technical drawings. Seals for dynamic applicationGeneral simplified representation
BS EN ISO 9222-2:1995, BS 308-1.15:1995. Technical drawings. Seals for dynamic applicationDetailed simplified representation
BS EN ISO 9223:2012. Corrosion of metals and alloys. Corrosivity of atmospheres. Classification, determination and estimation
BS EN ISO 9224:2012. Corrosion of metals and alloys. Corrosivity of atmospheres. Guiding values for the corrosivity categories
BS EN ISO 9225:2012. Corrosion of metals and alloys. Corrosivity of atmospheres. Measurement of environmental parameters affecting corrosivity of atmospheres
BS EN ISO 9226:2012. Corrosion of metals and alloys. Corrosivity of atmospheres. Determination of corrosion rate of standard specimens for the evaluation of corrosivity
BS EN ISO 9227:2006. Corrosion tests in artificial atmospheres. Salt spray tests
BS EN ISO 9227:2012. Corrosion tests in artificial atmospheres. Salt spray tests
BS EN ISO 9229:2007. Thermal insulation. Vocabulary
BS EN ISO 9233-1:2013. Cheese, cheese rind and processed cheese. Determination of natamycin contentMolecular absorption spectrometric method for cheese rind
BS EN ISO 9233-2:2013. Cheese, cheese rind and processed cheese. Determination of natamycin contentHigh-performance liquid chromatographic method for cheese, cheese rind and processed cheese
BS EN ISO 9237:1995. Textiles. Determination of the permeability of fabrics to air
BS EN ISO 9239-1:2002. Reaction to fire tests. Horizontal surface spread of flame on floor-covering systemsDetermination of the burning behaviour using a radiant heat source
BS EN ISO 9239-1:2010. Reaction to fire tests for flooringsDetermination of the burning behaviour using a radiant heat source
BS EN ISO 9241-1:1997. Ergonomic requirements for office work with visual display terminals (VDTs)General introduction
BS EN ISO 9241-10:1996, ISO 9241-10:1996. Ergonomic requirements for office work with visual display terminals (VDTs)Dialogue principles
BS EN ISO 9241-11:1998. Ergonomic requirements for office work with visual display terminals (VDTs)Guidance on usability
BS EN ISO 9241-110:2006. Ergonomics of human-system interactionDialogue principles
BS EN ISO 9241-12:1999. Ergonomic requirements for office work with visual display terminals (VDTs)Presentation of information
BS EN ISO 9241-129:2010. Ergonomics of human-system interactionGuidance on software individualization
BS EN ISO 9241-13:1999. Ergonomic requirements for office work with visual display terminals (VDTs)User guidance
BS EN ISO 9241-14:2000. Ergonomic requirements for office work with visual display terminals (VDTs)Menu dialogues
BS EN ISO 9241-143:2012. Ergonomics of human-system interactionForms
BS EN ISO 9241-15:1998. Ergonomic requirements for office work with visual display terminals (VDTs)Command dialogues
BS EN ISO 9241-151:2008. Ergonomics of human-system interactionGuidance on World Wide Web user interfaces
BS EN ISO 9241-154:2013. Ergonomics of human-system interactionInteractive voice response (IVR) applications
BS EN ISO 9241-16:1999. Ergonomic requirements for office work with visual display terminals (VDTs)Direct manipulation dialogues
BS EN ISO 9241-17:1998. Ergonomic requirements for office work with visual display terminals (VDTs)Form-filling dialogues
BS EN ISO 9241-171:2008. Ergonomics of human-system interactionGuidance on software accessibility
BS EN ISO 9241-20:2009. Ergonomics of human-system interactionAccessibility guidelines for information/communication technology (ICT) equipment and services
BS EN ISO 9241-210:2010. Ergonomics of human-system interactionHuman-centred design for interactive systems
BS EN ISO 9241-300:2008. Ergonomics of human-system interactionIntroduction to electronic visual display requirements
BS EN ISO 9241-302:2008. Ergonomics of human-system interactionTerminology for electronic visual displays
BS EN ISO 9241-303:2008. Ergonomics of human-system interactionRequirements for electronic visual displays
BS EN ISO 9241-303:2011. Ergonomics of human-system interactionRequirements for electronic visual displays
BS EN ISO 9241-304:2008. Ergonomics of human-system interactionUser performance test methods for electronic visual displays
BS EN ISO 9241-305:2008. Ergonomics of human-system interactionOptical laboratory test methods for electronic visual displays
BS EN ISO 9241-306:2008. Ergonomics of human-system interactionField assessment methods for electronic visual displays
BS EN ISO 9241-307:2008. Ergonomics of human-system interactionAnalysis and compliance test methods for electronic visual displays
BS EN ISO 9241-4:1998. Ergonomic requirements for office work with visual display terminals (VDTs)Keyboard requirements
BS EN ISO 9241-400:2007. Ergonomics of human-system interactionPrinciples and requirements for physical input devices
BS EN ISO 9241-410:2008+A1:2012. Ergonomics of human-system interactionDesign criteria for physical input devices
BS EN ISO 9241-420:2011. Ergonomics of human-system interactionSelection of physical input devices
BS EN ISO 9241-5:1999. Ergonomic requirements for office work with visual display terminals (VDTs)Workstation layout and postural requirements
BS EN ISO 9241-6:2000. Ergonomic requirements for office work with visual display terminals (VDTs)Guidance on the work environment
BS EN ISO 9241-7:1998. Ergonomic requirements for office work with visual display terminals (VDTs)Requirements for display with reflections
BS EN ISO 9241-8:1998. Ergonomic requirements for office work with visual display terminals (VDTs)Requirements for displayed colours
BS EN ISO 9241-9:2000. Ergonomic requirements for office work with visual display terminals (VDTs)Requirements for non-keyboard input devices
BS EN ISO 9241-910:2011. Ergonomics of human-system interactionFramework for tactile and haptic interaction
BS EN ISO 9251:1996, ISO 9251:1987. Thermal insulation. Heat transfer. Conditions and properties of materials. Vocabulary
BS EN ISO 9261:2010. Agricultural irrigation equipment. Emitters and emitting pipe. Specification and test methods
BS EN ISO 927:2009. Spices and condiments. Determination of extraneous matter and foreign matter content
BS EN ISO 9283:1998. Manipulating industrial robots. Performance criteria and related test methods
BS EN ISO 9288:1996. Thermal insulation. Heat transfer by radiation. Physical quantities and definitions
BS EN ISO 9289:1995, BS 4325-11:1991. Oilseed residues. Determination of free residual hexane
BS EN ISO 9300:1995. Measurement of gas flow by means of critical flow Venturi nozzles
BS EN ISO 9300:2005. Measurement of gas flow by means of critical flow Venturi nozzles
BS EN ISO 9308-1:2000, BS 6068-4-14:2000. Water quality. Detection and enumeration of Escherichia coli and coliform bacteriaMembrane filtration method
BS EN ISO 9311-1:2005. Adhesives for thermoplastics piping systemsDetermination of film properties
BS EN ISO 9311-2:2002. Adhesives for thermoplastic piping systemsDetermination of shear strength
BS EN ISO 9311-2:2011. Adhesives for thermoplastic piping systemsDetermination of shear strength
BS EN ISO 9311-3:2005. Adhesives for thermoplastic piping systemsTest method for the determination of resistance to internal pressure
BS EN ISO 9312:1995. Resistance welding equipment. Insulated pins for use in electrode back-ups
BS EN ISO 9312:2013. Resistance welding equipment. Insulated pins for use in electrode back-ups
BS EN ISO 9333:2006. Dentistry. Brazing materials
BS EN ISO 9337-1:2001. Contact lenses. Determination of back vertex powerMethod using focimeter with manual focusing
BS EN ISO 9337-2:2004. Contact lenses. Determination of back vertex powerMeasurement of contact lenses immersed in saline
BS EN ISO 9338:1998, BS 7208-15:1998. Optics and optical instruments. Contact lenses. Determination of the diameters
BS EN ISO 9339-1:1998, BS 7208-8:1998. Optics and optical instruments. Contact lenses. Determination of the thickness.Rigid contact lenses
BS EN ISO 9339-2:1998, BS 7208-18:1998. Optics and optical instruments. Contact lenses. Determination of the thickness.Hydrogel contact lenses
BS EN ISO 9340:1999, BS 7208-9:1999. Optics and optical instruments. Contact lenses. Determination of strains for rigid contact lenses
BS EN ISO 9341:1998, BS 7208-10:1998. Optics and optical instruments. Contact lenses. Determination of inclusions and surface imperfections for rigid contact lenses
BS EN ISO 9342:1998. Optics and optical instruments. Test lenses for calibration of focimeters
BS EN ISO 9342-1:2005. Optics and optical instruments. Test lenses for calibration of focimetersTest lenses for focimeters used for measuring spectacle lenses
BS EN ISO 9342-2:2005. Optics and optical instruments. Test lenses for calibration of focimetersTest lenses for focimeters used for measuring contact lenses
BS EN ISO 9346:1996. Thermal insulation. Mass transfer. Physical quantities and definitions
BS EN ISO 9346:2007. Hygrothermal performance of buildings and building materials. Physical quantities for mass transfer. Vocabulary
BS EN ISO 9360-1:2000. Anaesthetic and respiratory equipment. Heat and moisture exchangers (HMEs) for humidifying respired gases in humansHMEs for use with minimum tidal volumes of 250 ml
BS EN ISO 9360-1:2009. Anaesthetic and respiratory equipment. Heat and moisture exchangers (HMEs) for humidifying respired gases in humansHMEs for use with minimal tidal volumes of 250 ml
BS EN ISO 9360-2:2002. Anaesthetic and respiratory equipment. Heat and moisture exchangers (HMEs) for humidifying respired gases in humansHMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml
BS EN ISO 9360-2:2009. Anaesthetic and respiratory equipment. Heat and moisture exchangers (HMEs) for humidifying respired gases in humansHMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml
BS EN ISO 9363-1:1999. Optics and optical instruments. Contact lenses. Determination of cytotoxicity of contact lens materialAgar overlay test and growth inhibition test
BS EN ISO 9369:1997. Plastics. Basic materials for polyurethanes. Pure isocyanates. Analysis of isocyanate groups
BS EN ISO 9371:1995, BS 2782-7:Methods 734A to D. Plastics. Phenolic resins in the liquid state or in solution. Determination of viscosity
BS EN ISO 9377-2:2000, BS 6068-2.72:2000. Water quality. Determination of hydrocarbon oil indexMethod using solvent extraction and gas chromatography
BS EN ISO 9391:1995, BS 6068-5.15:1995. Water quality. Sampling in deep water for macro-invertebrates. Guidance on the use of colonization, qualitative and quantitative samplers
BS EN ISO 9394:1998. Ophthalmic optics. Contact lenses and contact lens care products. Determination of biocompatibility by ocular study with rabbit eyes
BS EN ISO 9394:2012. Ophthalmic optics. Contact lenses and contact lens care products. Determination of biocompatibility by ocular study with rabbit eyes
BS EN ISO 9396:1996, BS 2782-8:Methods 835F & G. Plastics. Phenolic resins. Determination of the gel time at a given temperature using automatic apparatus
BS EN ISO 9396:2001. Plastics. Phenolic resins. Determination of the gel time at a given temperature using automatic apparatus
BS EN ISO 9397:1997, BS 2782-4:Method 451N:1997. Plastics. Phenolic resins. Determination of free-formaldehyde content. Hydroxylamine hydrochloride method
BS EN ISO 9400:1996. Nickel-based alloys. Determination of resistance to intergranular corrosion
BS EN ISO 9408:1999, BS 6068-5.11:1999. Water quality. Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer
BS EN ISO 9409-1:1997. Manipulating industrial robots. Mechanical interfaces.Plates (form A)
BS EN ISO 9409-2:1997. Manipulating industrial robots. Mechanical interfaces.Shafts (form A)
BS EN ISO 9409-2:2003. Manipulating industrial robots. Mechanical interfaces.Shafts
BS EN ISO 9431:1999. Construction drawings. Spaces for drawing and for text, and title blocks on drawing sheets
BS EN ISO 9439:2001, BS 6068-5.12:2001. Water quality. Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium. Carbon dioxide evolution test
BS EN ISO 9444-2:2010. Continuously hot-rolled stainless steel. Tolerances on dimensions and formWide strip and sheet/plate
BS EN ISO 9445:2006. Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths. Tolerances on dimensions and form
BS EN ISO 9445-1:2010. Continuously cold-rolled stainless steel. Tolerances on dimensions and formNarrow strip and cut lengths
BS EN ISO 9445-2:2010. Continuously cold-rolled stainless steel. Tolerances on dimensions and formWide strip and plate/sheet
BS EN ISO 945:1994. Cast iron. Designation of microstructure of graphite
BS EN ISO 945-1:2008. Microstructure of cast ironsGraphite classification by visual analysis
BS EN ISO 9453:2006. Soft solder alloys. Chemical compositions and forms
BS EN ISO 9454-2:2001. Soft soldering fluxes. Classification and requirementsPerformance requirements
BS EN ISO 9455-10:2001. Soft soldering fluxes. Test methodsFlux efficacy test, solder spread method
BS EN ISO 9455-10:2012. Soft soldering fluxes. Test methodsFlux efficacy test, solder spread method
BS EN ISO 9455-12:1994. Soft soldering fluxes. Test methodsSteel tube corrosion test
BS EN ISO 9455-13:2000. Soft soldering fluxes. Test methodsDetermination of flux spattering
BS EN ISO 9455-15:2000. Soft soldering fluxes. Test methodsCopper corrosion test
BS EN ISO 9455-16:2001. Soft soldering fluxes. Test methodsFlux efficacy tests, wetting balance method
BS EN ISO 9455-16:2013. Soft soldering fluxes. Test methodsFlux efficacy test, wetting balance method
BS EN ISO 9455-17:2006. Soft soldering fluxes. Test methodsSurface insulation resistance comb test and electrochemical migration test of flux residues
BS EN ISO 9455-2:1996. Soft soldering fluxes. Test methodsDetermination of non-volatile matter, ebulliometric method
BS EN ISO 9455-3:1995. Soft soldering fluxes. Test methodsDetermination of acid value, potentiometric and visual titration methods
BS EN ISO 9455-6:1997. Soft soldering fluxes. Test methodsDetermination and detection of halide (excluding fluoride) content
BS EN ISO 9455-9:1996. Soft soldering fluxes. Test methodsDetermination of ammonia content
BS EN ISO 9456:1997. Optics and optical instruments. Opthalmic optics. Marking of spectacle frames
BS EN ISO 948:2009. Spices and condiments. Sampling
BS EN ISO 9488:2000. Solar energy. Vocabulary
BS EN ISO 9493:2010. Geometrical product specifications (GPS). Dimensional measuring equipment. Dial test indicators (lever type). Design and metrological characteristics
BS EN ISO 9509:1995, BS 6068-5.9:1990,ISO 9509:1989. Water quality. Method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste water
BS EN ISO 9509:2006. Water quality. Toxicity test for assessing the inhibition of nitrification of activated sludge microorganisms
BS EN ISO 9513:2002. Metallic materials. Calibration of extensometers used in uniaxial testing
BS EN ISO 9513:2012. Metallic materials. Calibration of extensometer systems used in uniaxial testing
BS EN ISO 9514:1995, BS 3900-A18:1993. Paints and varnishes. Determination of the pot-life of liquid systems. Preparation and conditioning of samples and guidelines for testing
BS EN ISO 9514:2005. Paints and varnishes. Determination of the pot life of multicomponent coating systems. Preparation and conditioning of samples and guidelines for testing
BS EN ISO 9539:2010. Gas welding equipment. Materials for equipment used in gas welding, cutting and allied processes
BS EN ISO 9554:2005. Fibre ropes. General specifications
BS EN ISO 9554:2010. Fibre ropes. General specifications
BS EN ISO 9556:2001. Steel and iron. Determination of total carbon content. Infrared absorption method after combustion in an induction furnace
BS EN ISO 9562:2004. Water quality. Determination of adsorbable organically bound halogens (AOX)
BS EN ISO 960:1998. Plastics. Polyamides (PA). Determination of water content
BS EN ISO 9606-2:2004. Qualification test of welders. Fusion weldingAluminium and aluminium alloys
BS EN ISO 9606-3:1999. Approval testing of welders. Fusion weldingCopper and copper alloys
BS EN ISO 9606-4:1999. Approval testing of welders. Fusion weldingNickel and nickel alloys
BS EN ISO 9606-5:2000. Approval testing of welders. Fusion weldingTitanium and titanium alloys, zirconium and zirconium alloys
BS EN ISO 9612:2009. Acoustics. Determination of occupational noise exposure. Engineering method
BS EN ISO 9614-1:1995. Acoustics. Determination of sound power levels of noise sources using sound intensityMeasurement at discrete points
BS EN ISO 9614-1:2009. Acoustics. Determination of sound power levels of noise sources using sound intensity Measurement at discrete points
BS EN ISO 9614-2:1997. Acoustics. Determination of sound power levels of noise sources using sound intensityMeasurement by scanning
BS EN ISO 9614-3:2002. Acoustics. Determination of sound power levels of noise sources using sound intensityPrecision method for measurement by scanning
BS EN ISO 9614-3:2009. Acoustics. Determination of sound power levels of noise sources using sound intensityPrecision method for measurement by scanning
BS EN ISO 9626:1995. Stainless steel needle tubing for the manufacture of medical devices
BS EN ISO 9653:2000. Adhesives. Test method for shear strength of adhesive bonds
BS EN ISO 9664:1995. Adhesives. Test methods for fatigue properties of structural adhesives in tensile shear
BS EN ISO 9665:1995. Adhesives. Animal glues. Methods for sampling and testing
BS EN ISO 9665:2000. Adhesives. Animal glues. Methods of sampling and testing (ISO 9665:1998)
BS EN ISO 9680:1996. Specification for dental operating light
BS EN ISO 9680:2007. Dentistry. Operating lights
BS EN ISO 9687:1996. Dental equipment. Graphical symbols
BS EN ISO 9692-1:2003. Welding and allied processes. Recommendations for joint preparationManual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels
BS EN ISO 9692-1:2013. Welding and allied processes. Types of joint preparationManual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels
BS EN ISO 9692-2:1998. Welding and allied processes. Joint preparationSubmerged arc welding of steels
BS EN ISO 9692-3:2001. Welding and allied processes. Joint preparationMetal inert gas welding and tungsten inert gas welding of aluminium and its alloys
BS EN ISO 9692-4:2003. Welding and allied processes. Joint preparationClad steels
BS EN ISO 9693:1995. Specification for dental ceramic fused to metal restorative materials
BS EN ISO 9693:2000. Metal-ceramic dental restorative systems
BS EN ISO 9693-1:2012. Dentistry. Compatibility testingMetal-ceramic systems
BS EN ISO 9694:1999. Dental phosphate-bonded casting investments
BS EN ISO 9702:1999. Plastics. Amine epoxide hardeners. Determination of primary, secondary and tertiary amine group nitrogen content
BS EN ISO 9703-3:1999. Anaesthetic and respiratory care alarm signalsGuidance on application of alarms
BS EN ISO 9706:2000. Information and documentation. Paper for documents. Requirements for permanence
BS EN ISO 9707:1995. Information and documentation. Statistics on the production and distribution of books, newspapers, periodicals and electronic publications
BS EN ISO 9712:2012. Non-destructive testing. Qualification and certification of NDT personnel
BS EN ISO 9713:2004. Neurosurgical implants. Self-closing intracranial aneurysm clips
BS EN ISO 9713:2009. Neurosurgical implants. Self-closing intracranial aneurysm clips
BS EN ISO 9717:2013. Metallic and other inorganic coatings. Phosphate conversion coating of metals
BS EN ISO 9771:1997, BS 2782-4:Method 451P:1997. Plastics. Phenolic resins. Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
BS EN ISO 9773:1999. Plastics. Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
BS EN ISO 9785:2002. Ship and marine technology. Ventilation of cargo spaces where vehicles with internal combustion engines are driven. Calculation of theoretical total airflow required
BS EN ISO 9787:1999. Manipulating industrial robots. Coordinate systems and motion nomenclatures
BS EN ISO 9801:1999. Ophthalmic instruments. Trial case lenses
BS EN ISO 9801:2009. Ophthalmic instruments. Trial case lenses
BS EN ISO 9807:1997. Banking and related financial services. Requirements for message authentication (retail)
BS EN ISO 9809-1:2010. Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testingQuenched and tempered steel cylinders with tensile strength less than 1100 MPa
BS EN ISO 9809-2:2010. Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testingQuenched and tempered steel cylinders with tensile strength greater than or equal to 1100 MPa
BS EN ISO 9809-3:2010. Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testingNormalized steel cylinders
BS EN ISO 9831:2003. Animal feeding stuffs, animal products, and faeces or urine. Determination of gross calorific value. Bomb calorimeter method
BS EN ISO 9832:2000. Animal and vegetable fats and oils. Determination of residual technical hexane content
BS EN ISO 9832:2003. Animal and vegetable fats and oils. Determination of residual technical hexane content
BS EN ISO 9856:1996, BS 490-10.8:1996. Conveyor belts. Determination of elastic modulus
BS EN ISO 9856:2003+A1:2012. Conveyor belts. Determination of elastic and permanent elongation and calculation of elastic modulus
BS EN ISO 9862:2005. Geosynthetics. Sampling and preparation of test specimens
BS EN ISO 9863-1:2005. Geosynthetics. Determination of thickness at specified pressuresSingle layers
BS EN ISO 9863-2:1996. Geotextiles and geotextile-related products. Determination of thickness at specified pressuresProcedure for determination of thickness of single layers of multilayer products
BS EN ISO 9864:2005. Geosynthetics. Test method for the determination of mass per unit area of geotextiles and geotextile-related products
BS EN ISO 9873:2000. Dental hand instruments. Reusable mirrors and handles
BS EN ISO 9875:1995, ISO 9875:1991. Specification for marine echo-sounding equipment
BS EN ISO 9875:1997. Ships and marine technology. Marine echo-sounding equipment
BS EN ISO 9875:2002. Ships and marine technology. Marine echo-sounding equipment
BS EN ISO 9876:1995, ISO 9876:1989. Specification for marine facsimile receivers for meteorological charts
BS EN ISO 9876:1999. Ships and marine technology. Marine facsimile receivers for meteorological charts
BS EN ISO 9886:2001. Evaluation of thermal strain by physiological measurements
BS EN ISO 9886:2004. Ergonomics. Evaluation of thermal strain by physiological measurements
BS EN ISO 9887:1995, BS 6068-5.14:1995. Water quality. Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium. Semi-continuous activated sludge method (SCAS)
BS EN ISO 9888:1999, BS 6068-5.13:1999. Water quality. Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium. Static test (Zahn-Wellens method)
BS EN ISO 9902-1:2001+A1:2009. Textile machinery. Noise test codeCommon requirements
BS EN ISO 9902-2:2001+A1:2009. Textile machinery. Noise test codeSpinning preparatory and spinning machinery
BS EN ISO 9902-3:2001+A1:2009. Textile machinery. Noise test codeNonwoven machinery
BS EN ISO 9902-4:2001+A1:2009. Textile machinery. Noise test codeYarn processing, cordage and rope manufacturing machinery
BS EN ISO 9902-5:2001+A1:2009. Textile machinery. Noise test codeWeaving and knitting preparatory machinery
BS EN ISO 9902-6:2001+A1:2009. Textile machinery. Noise test codeFabric manufacturing machinery
BS EN ISO 9902-7:2001+A1:2009. Textile machinery. Noise test codeDyeing and finishing machines
BS EN ISO 9905:1998+A1:2011. Technical specifications for centrifugal pumps. Class I
BS EN ISO 9906:2000. Rotodynamic pumps. Hydraulic performance acceptance tests. Grades 1 and 2
BS EN ISO 9906:2012. Rotodynamic pumps. Hydraulic performance acceptance tests. Grades 1, 2 and 3
BS EN ISO 9908:1998+A1:2011. Technical specifications for centrifugal pumps. Class III
BS EN ISO 9913-1:1998, BS 7208-12:1997. Optics and optical instruments. Contact lensesDetermination of oxygen permeability and transmissibility by the FATT method
BS EN ISO 9913-2:2000, BS 7208-23:2000. Optics and optical instruments. Contact lensesDetermination of oxygen permeability and transmissibility by the coulometric method
BS EN ISO 9914:1997, BS 7208-6:1997. Optics and optical instruments. Contact lenses. Determination of refractive index of contact lens materials
BS EN ISO 9917-1:2003. Dental water-based cementsPowder/liquid acid-base cements
BS EN ISO 9917-1:2007. Dentistry. Water-based cementsPowder/liquid acid-base cements
BS EN ISO 9917-2:2000. Dental water-based cementsLight-activated cements
BS EN ISO 9917-2:2010. Dentistry. Water-based cementsResin-modified cements
BS EN ISO 9919:2005. Medical electrical equipment. Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use
BS EN ISO 9919:2009. Medical electrical equipment. Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use
BS EN ISO 9920:2003. Ergonomics of the thermal environment. Estimation of the thermal insulation and evaporative resistance of a clothing ensemble
BS EN ISO 9920:2007. Ergonomics of the thermal environment. Estimation of thermal insulation and water vapour resistance of a clothing ensemble
BS EN ISO 9920:2009. Ergonomics of the thermal environment. Estimation of thermal insulation and water vapour resistance of a clothing ensemble
BS EN ISO 9921:2003. Ergonomics. Assessment of speech communication
BS EN ISO 9934-1:2001. Non-destructive testing. Magnetic particle testingGeneral principles
BS EN ISO 9934-2:2002. Non-destructive testing. Magnetic particle testingDetection media
BS EN ISO 9934-3:2002. Non-destructive testing. Magnetic particle testingEquipment
BS EN ISO 9936:2006+A1:2011. Animal and vegetable fats and oils. Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography
BS EN ISO 9944:1995, BS 2782-4:Method 451Q:1995. Plastics. Phenolic resins. Determination of electrical conductivity of resin extracts
BS EN ISO 9946:1999. Manipulating industrial robots. Presentation of characteristics
BS EN ISO 9956-10:1997. Specification and approval of welding procedures for metallic materialsWelding procedure specification for electron beam welding
BS EN ISO 9956-11:1997. Specification and approval of welding procedures for metallic materialsWelding procedure specification for laser beam welding
BS EN ISO 9963-1:1996, BS 6068-2.51:1996. Water quality. Determination of alkalinityDetermination of total and composite alkalinity
BS EN ISO 9963-2:1996, BS 6068-2.52:1996. Water quality. Determination of alkalinityDetermination of carbonate alkalinity
BS EN ISO 9967:1995, BS 2782-11:Method 1114A:1995. Thermoplastics pipes. Determination of creep ratio
BS EN ISO 9967:2007. Thermoplastics pipes. Determination of creep ratio
BS EN ISO 9969:1995, BS 2782-11:Method 1114B:1995. Thermoplastics pipes. Determination of ring stiffness
BS EN ISO 9969:2007. Thermoplastics pipes. Determination of ring stiffness
BS EN ISO 9974-1:2000. Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealingThreaded ports
BS EN ISO 9974-2:2000. Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealingStud ends with elastomeric sealing (type E)
BS EN ISO 9974-3:2000. Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealingStud ends with metal-to-metal sealing (type B)
BS EN ISO 9988-1:2006. Plastics. Polyoxymethylene (POM) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 9994:1996. Lighters. Safety specification
BS EN ISO 9994:2002. Lighters. Safety specification
BS EN ISO 9994:2006+A1:2008. Lighters. Safety specification
BS EN ISO 9997:2000. Dental cartridge syringes
BS EN ISO 9999:1998. Technical aids for disabled persons. Classification
BS EN ISO 9999:2002. Technical aids for persons with disabilities. Classification and terminology
BS EN ISO 9999:2007. Assistive products for persons with disability. Classification and terminology
BS EN ISO 9999:2011. Assistive products for persons with disability. Classification and terminology
BS EN ISO/IEC 10373:1995. Identification cards. Test methods
BS EN ISO/IEC 11159:1997. Information technology. Office equipment. Minimum information to be included in specification sheets. Copying machines
BS EN ISO/IEC 11159:1998. Information technology. Office equipment. Minimum information to be included in specification sheets. Copying machines
BS EN ISO/IEC 11172-1:1995. Information technology. Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/sSystems
BS EN ISO/IEC 11172-2:1995. Information technology. Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/sVideo
BS EN ISO/IEC 11172-3:1995. Information technology. Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/sAudio
BS EN ISO/IEC 11172-4:1997. Information technology. Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/sCompliance testing
BS EN ISO/IEC 11544:1995. Information technology. Coded representation of picture and audio information. Progressive bi-level image compression
BS EN ISO/IEC 13818-1:1997. Information technology. Generic coding of moving pictures and associated audio informationSystems
BS EN ISO/IEC 13818-3:1996. Information technology. Generic coding of moving pictures and associated audio informationAudio
BS EN ISO/IEC 13818-9:2001. Information technology. Generic coding of moving pictures and associated audio informationExtension for real time interface for systems decoders
BS EN ISO/IEC 15416:2002. Information technology. Automatic identification and data capture techniques. Bar code print quality test specification. Linear symbols
BS EN ISO/IEC 15419:2002. Information technology. Automatic identification and data capture techniques. Bar code digital imaging and printing performance testing
BS EN ISO/IEC 15419:2010. Information technology. Automatic identification and data capture techniques. Bar code digital imaging and printing performance testing
BS EN ISO/IEC 15421:2002. Information technology. Automatic identification and data capture techniques. Bar code master test specifications
BS EN ISO/IEC 15423:2005. Information technology. Automatic identification and data capture techniques. Bar code scanner and decoder performance testing
BS EN ISO/IEC 15423:2010. Information technology. Automatic identification and data capture techniques. Bar code scanner and decoder performance testing
BS EN ISO/IEC 15426-2:2006. Information technology. Automatic identification and data capture techniques. Bar code verifier conformance specificationTwo-dimensional symbols
BS EN ISO/IEC 15438:2010. Information technology. Automatic identification and data capture techniques. PDF417 bar code symbology specification
BS EN ISO/IEC 17000:2004. Conformity assessment. Vocabulary and general principles
BS EN ISO/IEC 17011:2004. Conformity assessment. General requirements for accreditation bodies accrediting conformity assessment bodies
BS EN ISO/IEC 17020:2004. General criteria for the operation of various types of bodies performing inspection
BS EN ISO/IEC 17020:2012. Conformity assessment. Requirements for the operation of various types of bodies performing inspection
BS EN ISO/IEC 17021:2006. Conformity assessment. Requirements for bodies providing audit and certification of management systems
BS EN ISO/IEC 17021:2011. Conformity assessment. Requirements for bodies providing audit and certification of management systems
BS EN ISO/IEC 17024:2003. Conformity Assessment. General requirements for bodies operating certification of persons
BS EN ISO/IEC 17024:2012. Conformity assessment. General requirements for bodies operating certification of persons
BS EN ISO/IEC 17025:2000. General requirements for the competence of testing and calibration laboratories
BS EN ISO/IEC 17025:2005. General requirements for the competence of testing and calibration laboratories
BS EN ISO/IEC 17030:2009. Conformity assessment. General requirements for third-party marks of conformity
BS EN ISO/IEC 17040:2005. Conformity assessment. General requirements for peer assessment of conformity assessment bodies and accreditation bodies
BS EN ISO/IEC 17043:2010. Conformity assessment. General requirements for proficiency testing
BS EN ISO/IEC 17050-1:2004. Conformity assessment. Supplier's declaration of conformityGeneral requirements
BS EN ISO/IEC 17050-1:2010. Conformity assessment. Supplier's declaration of conformityGeneral requirements
BS EN ISO/IEC 17050-2:2004. Conformity assessment. Supplier's declaration of conformitySupporting documentation
BS EN ISO/IEC 17065:2012. Conformity assessment. Requirements for bodies certifying products, processes and services
BS EN ISO/IEC 17067:2013. Conformity assessment. Fundamentals of product certification and guidelines for product certification schemes
BS EN ISO/IEC 19762-1:2012. Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabularyGeneral terms relating to AIDC
BS EN ISO/IEC 19762-3:2012. Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabularyRadio frequency identification (RFID)
BS EN ISO/IEC 19788-1:2012. Information technology. Learning, education and training. Metadata for learning resourcesFramework
BS EN ISO/IEC 19788-2:2012. Information technology. Learning, education and training. Metadata for learning resourcesDublin Core elements
BS EN ISO/IEC 19796-1:2009. Information technology. Learning, education and training. Quality management, assurance and metricsGeneral approach
BS EN ISO/IEC 7487-1:1995. Information technology. Data interchange on 130mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on both sides. ISO type 202Dimensional, physical and magnetic characteristics
BS EN ISO/IEC 7498-1:1995, ISO/IEC 7498-1:1994. Information technology. Open systems interconnection. Basic reference modelThe basic model
BS EN ISO/IEC 7501-1:1995. Identification cards. Machine readable travel documentsMachine readable passport
BS EN ISO/IEC 7810:1996. Identification cards. Physical characteristics
BS EN ISO/IEC 7811-1:1996. Identification cards. Recording techniqueEmbossing
BS EN ISO/IEC 7811-2:1996. Identification cards. Recording techniqueMagnetic stripe
BS EN ISO/IEC 7811-3:1996. Identification cards. Recording techniqueLocation of embossed characters on ID-1 cards
BS EN ISO/IEC 7811-4:1996. Identification cards. Recording techniqueLocation of read-only magnetic tracks. Tracks 1 and 2
BS EN ISO/IEC 7811-5:1996. Identification cards. Recording techniqueLocation of read-write magnetic track. Track 3
BS EN ISO/IEC 7812-1:1995. Identification cards. Identification of issuersNumbering system
BS EN ISO/IEC 7812-2:1995. Identification cards. Identification of issuersApplication and registration procedures
BS EN ISO/IEC 7813:1996. Identification cards. Financial transaction cards
BS EN ISO/IEC 7816-4:1996. Identification cards. Integrated circuit(s) cards with contactsInterindustry commands for interchange
BS EN ISO/IEC 7816-5:1996. Identification cards. Integrated circuit(s) cards with contactsNumbering system and registration procedure for application identifiers
BS EN ISO/IEC 7816-6:1997. Identification cards. Integrated circuit(s) cards with contactsInterindustry data elements
BS EN ISO/IEC 7942-1:1996. Information technology. Computer graphics and image processing. Graphical Kernel System (GKS)Functional description
BS EN ISO/IEC 80079-34:2011. Explosive atmospheresApplication of quality systems for equipment manufacture
BS EN ISO/IEC 8072:1996. Information technology. Open Systems Interconnection. Transport service definition
BS EN ISO/IEC 8651-4:1997. Information technology. Computer graphics. Graphic Kernel Systems (GKS) language bindings.C
BS EN ISO/IEC 9314-3:1996. Information processing systems. Fibre Distributed Data Interface (FDDI)Physical Layer Medium Dependent (PMD)
BS EN ISO/IEC 9316:1997. Information technology. Small computer system interface-2
BS EN ISO/IEC 9592-4:1997. Information processing systems. Computer graphics. Programmer's Hierarchical Interactive Graphics System (PHIGS)Plus lumière and surfaces, PHIGS PLUS
BS EN ISO/IEC 9646-1:1996. Information technology. Open systems interconnection. Conformance testing methodology and frameworkGeneral concepts
BS EN ISO/IEC 9646-2:1996. Information technology. Open systems interconnection. Conformance testing methodology and frameworkAbstract Test Suite specification
BS EN ISO/IEC 9646-4:1996. Information technology. Open systems interconnection. Conformance testing methodology and frameworkTest realization
BS EN ISO/IEC 9646-5:1996. Information technology. Open systems interconnection. Conformance testing methodology and frameworkRequirements on test laboratories and clients for the conformance assessment process
BS EN ISO/IEC 9646-6:1996. Information technology. Open systems interconnection. Conformance testing methodology and frameworkProtocol profile test specification
BS EN ISO/IEC 9661:1997. Information technology. Data interchange on 12,7 mm wide magnetic tape cartridges. 18 tracks, 1 491 data bytes per millimetre
BS EN ISO/IEC 9945-2:1995. Information technology. Portable operating system interface (POSIX)Shell and utilities
BS EN ISO/TR 11688-2:2001. Acoustics. Recommended practice for the design of low-noise machinery and equipmentIntroduction to the physics of low-noise design
BS EN ISP 10607-1:1994. Information technology. International standardized profiles AFTnn. File transfer, access and managementSpecification of ACSE, presentation and session protocols for the use by FTAM
BS EN ISP 10607-2:1994. Information technology. International standardized profiles AFTnn. File transfer, access and managementDefinition of document types, constraint sets and syntaxes
BS EN ISP 10607-2:1997. Information technology. International standardized profiles AFTnn. File transfer, access and managementDefinition of document types, constraint sets and syntaxes
BS EN ISP 10607-3:1994. Information technology. International standardized profiles AFTnn. File transfer, access and managementAFT 11. Simple file transfer service (unstructured)
BS EN ISP 10607-3:1997. Information technology. International standardized profiles AFTnn. File transfer, access and managementAFT11. Simple file transfer service (unstructured) (regional variant of ISO/IEC ISP 10607-3:1995)
BS EN ISP 10607-4:1994. Information technology. International standardized profiles AFTnn. File transfer, access and managementAFT12. Positional file transfer service (flat)
BS EN ISP 10607-4:1997. Information technology. International standardized profiles AFTnn. File transfer, access and managementAFT12. Positional file transfer service (flat) (regional variant of ISO/IEC ISP 10607-4:1995)
BS EN ISP 10607-5:1994. Information technology. International standardized profiles AFTnn. File transfer, access and managementAFT22. Positional file access service (flat)
BS EN ISP 10607-5:1997. Information technology. International standardized profiles AFTnn. File transfer, access and managementAFT22. Positional file access service (flat) (regional variant of ISO/IEC ISP 10607-5:1995)
BS EN ISP 10607-6:1994. Information technology. International standardized profiles AFTnn. File transfer, access and managementAFT3. File management service
BS EN ISP 10607-6:1997. Information technology. International standardized profiles AFTnn. File transfer, access and managementAFT3. File management service
BS EN ISP 10608-1:1995, ISO/IEC ISP 10608-1:1992. Information technology. International standardized profile TAnnnn. Connection-mode transport service over connectionless-mode network serviceGeneral overview and subnetwork-independent requirements.
BS EN ISP 10608-13:1997. Information technology. International standardized profile TAnnnn. Connection-mode transport service over connectionless-mode network serviceMAC sublayer and physical layer dependent requirements for a token ring LAN subnetwork
BS EN ISP 10608-2:1995, ISO/IEC ISP 10608-2:1992. Information technology. International standardized profile TAnnnn. Connection-mode transport service over connectionless-mode network serviceTA51 profile including subnetwork-dependent requirements for CSMA/CD Local area networks (LANs)
BS EN ISP 10608-4:1997. Information technology. International standardized profile TAnnnn. Connection-mode transport service over connectionless-mode network serviceDefinition of profile TA53, operation over a token ring LAN subnetwork
BS EN ISP 10608-6:1997. Information technology. International standardized profile TAnnnn. Connection-mode transport service over connectionless-mode network serviceDefinition of profile TA54, operation over an FDDI LAN subnetwork
BS EN ISP 10609-10:1997. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network serviceLAN subnetwork-dependent, media-independent requirements
BS EN ISP 10609-11:1997. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network serviceCSMA/CD subnetwork-dependent, media-dependent requirements
BS EN ISP 10609-12:1997. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network serviceDefinition of profile TC51, provision of the OSI connection-mode transport service using the OSI connection-mode network service in an end system attached to a CSMA/CD LAN
BS EN ISP 10609-14:1997. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network serviceDefinition of profile TC53, provision of the OSI connection-mode transport service using the OSI connection-mode network service in an end system attached to a token ring LAN
BS EN ISP 10609-2:1997. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network serviceSubnetwork-type independent requirements for group TC
BS EN ISP 10609-3:1997. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network serviceSubnetwork-type independent requirements for group TD
BS EN ISP 10609-4:1997. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network serviceSubnetwork-type independent requirements for group TE
BS EN ISP 10609-6:1997. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network serviceDefinition of profiles TC1111/TC1121
BS EN ISP 10609-7:1997. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network serviceDefinition of profiles TD1111/TD1121
BS EN ISP 10609-8:1997. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network serviceDefinition of profiles TE1111/TE1121
BS EN ISP 10609-9:1997. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network serviceSubnetwork-type dependent requirements for network layer, data link layer and physical layer concerning permanent access to a packet switched data network using virtual calls
BS EN ISP 10610-1:1995. Information technology. International standardized profile FOD11. Open document format: simple document structure. Character content architecture onlyDocument Application Profile (DAP)
BS EN ISP 10611-1:1996. Information technology. International standardized profiles AHM1n. Message handling systems. Common messagingMHS Service support
BS EN ISP 10611-2:1996. Information technology. International standardized profiles AHM1n. Message handling systems. Common messagingSpecification of ROSE, RTSE, ACSE, Presentation and Session Protocols for use by MHS
BS EN ISP 10611-3:1996. Information technology. International standardized profiles AHM1n. Message handling systems. Common messagingAMH11. Message transfer (P1)
BS EN ISP 10611-4:1996. Information technology. International standardized profiles AHM1n. Message handling systems. Common messagingAMH12. MTS Access (P3)
BS EN ISP 10611-5:1996. Information technology. International standardized profiles AHM1n. Message handling systems. Common messagingAMH13 MS Access (P7)
BS EN ISP 10612-1:1997. Information technology. International standardized profile RD. Relaying the MAC service using transparent bridgingSubnetwork-independent requirements
BS EN ISP 10612-2:1997. Information technology. International standardized profile RD. Relaying the MAC service using transparent bridgingCSMA/CD LAN subnetwork-dependent, media-dependent requirements
BS EN ISP 10612-3:1997. Information technology. International standardized profile RD. Relaying the MAC service using transparent bridgingToken ring LAN subnetwork-dependent, media-dependent requirements
BS EN ISP 10612-4:1997. Information technology. International standardized profile RD. Relaying the MAC service using transparent bridgingProfile RD51.51 (CSMA/CD LAN - CSMA/CD LAN)
BS EN ISP 10612-5:1997. Information technology. International standardized profile RD. Relaying the MAC service using transparent bridgingProfile RD51.54 (CSMA/CD LAN - FDDI LAN)
BS EN ISP 10612-6:1997. Information technology. International standardized profile RD. Relaying the MAC service using transparent bridgingProfile RD54.54 (FDDI LAN - FDDI LAN)
BS EN ISP 10612-7:1997. Information technology. International standardized profile RD. Relaying the MAC service using transparent bridgingProfile RD51.53 (CSMA/CD LAN - token ring LAN)
BS EN ISP 10612-8:1997. Information technology. International standardized profile RD. Relaying the MAC service using transparent bridgingProfile RD53.53 (token ring LAN - token ring LAN)
BS EN ISP 10612-9:1997. Information technology. International standardized profile RD. Relaying the MAC service using transparent bridgingProfile RD53.54 (token ring LAN - FDDI LAN)
BS EN ISP 10613-1:1997. Information technology. International standardized profile RA. Relaying the connectionless-mode network serviceSubnetwork-independent requirements
BS EN ISP 10613-2:1997. Information technology. International standardized profile RA. Relaying the connectionless-mode network serviceLAN subnetwork-dependent, media independent requirements
BS EN ISP 10613-3:1997. Information technology. International standardized profile RA. Relaying the connectionless-mode network serviceCSMA/CD LAN subnetwork-dependent, media-dependent requirements
BS EN ISP 10613-4:1997. Information technology. International standardized profile RA. Relaying the connectionless-mode network serviceFDDI LAN subnetwork-dependent, media-dependent requirements
BS EN ISP 10613-5:1997. Information technology. International standardized profile RA. Relaying the connectionless-mode network serviceDefinition of profile RA51.51, relaying the connectionless-mode network service between CSMA/CD LAN subnetworks
BS EN ISP 10613-6:1997. Information technology. International standardized profile RA. Relaying the connectionless-mode network serviceDefinition of profile RA51.54, relaying the connectionless-mode network service between CSMA/CD LAN subnetwork and FDDI LAN subnetworks
BS EN ISP 10613-7:1997. Information technology. International standardized profile RA. Relaying the connectionless-mode network servicePSDN subnetwork-dependent, media-dependent requirements for virtual calls over a permanent access
BS EN ISP 10613-8:1997. Information technology. International standardized profile RA. Relaying the connectionless-mode network serviceDefinition of profile RA51.1111, relaying the connectionless-mode network service between CSMA/CD LAN subnetworks and PSDNs using virtual calls over a PSTN leased line permanent access
BS EN ISP 10613-9:1997. Information technology. International standardized profile RA. Relaying the connectionless-mode network serviceDefinition of profile RA51.1121, relaying the connectionless-mode network service between CSMA/CD LAN subnetworks and PSDNs using virtual calls over a digital data circuit/CSDN leased line permanent access
BS EN ISP 11181-1:1995. Information technology. International standardized profile FOD26. Open document format: Enhanced document structure. Character, raster graphics and geometric graphics content architecturesDocument Application Profile (DAP)
BS EN ISP 11182-1:1995. Information technology. International standardized profile FOD36. Open document format: Extended document structure. Character, raster graphics and geometric graphics content architecturesDocument Application Profile (DAP)
BS EN ISP 11183-1:1995. Information technology. International standardized profiles AOM1n OSI management. Management communicationsSpecification of ACSE, presentation and session protocols for the use by ROSE and CMISE
BS EN ISP 11183-2:1995. Information technology. International standardized profiles AOM1n OSI management. Management communicationsCMISE/ROSE for AOM12. Enhanced management communications
BS EN ISP 11183-3:1995. Information technology. International standardized profiles AOM1n OSI management. Management communicationsCMISE/ROSE for AOM11. Basic management communications
BS EN ISP 11185-1:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitionsFVT211, FVT212. Sequenced and unsequenced application control objects
BS EN ISP 11185-10:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitionsFVT231. Forms FEPCO (Field Entry Pilot Control Object) No.1
BS EN ISP 11185-11:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitionsFVT232. Paged FEPCO (Field Entry Pilot Control Object) No. 1
BS EN ISP 11185-2:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitionsFVT213, FVT214. Sequenced and unsequenced terminal control objects
BS EN ISP 11185-3:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitionsFVT215, FVT216. Application RIO record loading control object, terminal, RIO record notification control object
BS EN ISP 11185-4:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitionsFVT217. Horizontal Tabulation Control Object
BS EN ISP 11185-5:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitionsFVT218. Logical image control object
BS EN ISP 11185-6:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitionsFVT219. Status message control object
BS EN ISP 11185-7:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitionsFVT2110. Entry-Control Control Object
BS EN ISP 11185-8:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitionsFVT221. Forms FEICO (Field Entry Instruction Control Object) No.1
BS EN ISP 11185-9:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitionsFVT222. Paged FEICO (Field Entry Instruction Control Object) No. 1
BS EN ISP 11188-1:1997. Information technology. International standardized profiles. Common upper layer requirementsBasic connection oriented requirements
BS EN ISP 11190:1996. Information technology. International standardized profile FD13. Directory data definitions. FTAM use of the directory
BS EN ISP 12061-1:1997. Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesingIntroduction to the transaction processing profiles
BS EN ISP 12061-10:1996. Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesingProvider supported chained transactions. Shared control (ATP32)
BS EN ISP 12061-2:1997. Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesingSupport of OSI TP APDUs
BS EN ISP 12061-3:1997. Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesingSupport of CCR APDUs
BS EN ISP 12061-4:1997. Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesingSupport of session, presentation and ACSE PDUs
BS EN ISP 12061-5:1996. Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesingApplication supported transactions. Polarized control (ATP11)
BS EN ISP 12061-6:1996. Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesingApplication supported transactions. Shared control (ATP12)
BS EN ISP 12061-7:1996. Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesingProvider supported unchained transactions. Polarized control (ATP21)
BS EN ISP 12061-8:1996. Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesingProvider supported unchained transactions. Shared control (ATP22)
BS EN ISP 12061-9:1996. Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesingProvider supported chained transactions. Polarized control (ATP31)
BS EN ISP 12062-1:1996. International technology. International Standardized Profiles AMH2n. Message Handling Systems. Interpersonal MessagingIPM MHS Service Support
BS EN ISP 12062-2:1996. International technology. International Standardized Profiles AMH2n. Message Handling Systems. Interpersonal MessagingAMH2-IPM Content
BS EN ISP 12062-3:1996. International technology. International Standardized Profiles AMH2n. Message Handling Systems. Interpersonal MessagingAMH22-IPM Requirements for Message Transfer (P1)
BS EN ISP 12062-4:1996. International technology. International Standardized Profiles AMH2n. Message Handling Systems. Interpersonal MessagingAMH23-IPM Requirements for MTS Access (P3)
BS EN ISP 12062-5:1996. International technology. International Standardized Profiles AMH2n. Message Handling Systems. Interpersonal MessagingAMH24 IPM Requirements for Enhanced MS Access (P7)
BS EN ISP 12063-1:1996. Information technology. International Standardized Profiles AMH3n. Message Handling Systems. EDI MessagingEDIMG MHS service support
BS EN ISP 12063-2:1996. Information technology. International Standardized Profiles AMH3n. Message Handling Systems. EDI MessagingAMH31. EDIMG Content
BS EN ISP 12063-3:1996. Information technology. International Standardized Profiles AMH3n. Message Handling Systems. EDI MessagingAMH32. EDIMG Requirements for message transfer (P1)
BS EN ISP 12063-4:1996. Information technology. International Standardized Profiles AMH3n. Message Handling Systems. EDI MessagingAMH33. EDIMG Requirements for MTS Access (P3)
BS EN ISP 12063-5:1996. Information technology. International Standardized Profiles AMH3n. Message Handling Systems. EDI MessagingAMH34. EDIMG Requirements for enhanced MS access (P7)
BS EN ISP 12064-1:1998. Information technology. International standardized profile FOD112. Open document format: image applications. Simple document structure. Raster graphics content architecture.Document application profile (DAP) (ISO/IEC ISP 12064-1:1995)
BS EN ISP 12068-1:1997. Information technology. International standardized profile FDI 4. Directory data definitions. Use of the directory for OSI TPFDI 41. Basic naming and addressing
BS EN ISP 12068-2:1997. Information technology. International standardized profile FDI 4. Directory data definitions. Use of the directory for OSI TPFDI 42. Enhanced naming and addressing
BS EN ISP 12070-1:1997. Information technology. International standardized profiles FCSnnn. Character set 8-bit code structure based on ISO/IEC 2022FCS111. 2022 Option 1
BS EN ISP 15124-1:1999. Information technology. International standardized profile FOD126. Open document format: image applications. Enhanced document structure. Character, raster graphics, and geometric graphics content architectureDocument application profile (DAP)
BS F 121:1964. Specification for metallic slide fasteners for aeronautical purposes
BS F 125:1973. Specification for rubber bonded compressed asbestos fibre jointing
BS F 127:1983. Specification for nylon fabrics suitable for coating with natural or synthetic elastomers
BS F 128:1985. Specification for cotton webbing suitable for aerospace purposes (warp yarn nominally R 310 tex)
BS F 129:1986. Specification for woven polyester narrow fabrics suitable for aerospace purposes
BS F 130:1987. Specification for rubber bonded compressed aramid fibre jointing material for aerospace purposes
BS F 132:1987. Specification for braided nylon cord with specified dimensional stability for aerospace purposes
BS F 133:1988. Specification for warp knitted nylon fabric for aerospace purposes
BS F 134:1989. Specification for continuous filament polyester sewing thread suitable for aerospace purposes
BS F 135:1987. Specification for braided nylon cord with unspecified dimensional stability for aerospace purposes
BS F 137:1989. Specification for warp knitted cotton polishing and polish application cloths for aircraft transparencies
BS F 138:1991. Specification for polyester plain (bobbin) netting suitable for aerospace purposes
BS F 140:1991. Glossary of parachute terms
BS F 141:1992. Specification for closely woven cotton fabrics (L28 and L34) for aerospace purposes
BS F 142:1995. Specification for hydrolysis resistant, thermoplastic polyether polyurethane elastomer-coated nylon fabric for aerospace purposes
BS F 143:1993. Specification for para-aramid braided cords for aerospace purposes
BS F 151:1991. Specification for shuttleless woven cotton webbing for aerospace purposes
BS F 152:2006. Properties of silicone rubber sheet, mouldings and extrusions (general purpose). Specification
BS F 153:2006. Properties of oil resistant silicone rubber sheet, mouldings and extrusions. Specification
BS F 154:2006. Properties of fluorosilicone rubber sheet, mouldings and extrusions. Specification
BS F 156:2006. Properties of fluid resistant ethylene-propylene rubber sheet, mouldings and extrusions. Specification
BS F 157:2006. Properties of high tear strength silicone rubber sheet, mouldings and extrusions. Specification
BS F 159:2006. Properties of elastomeric toroidal sealing rings ("O" rings) manufactured from oil resistant silicone rubber material conforming to BS F 153. Specification
BS F 162:2006. Properties of elastomeric toroidal sealing rings ("O" rings) manufactured from ethylene-propylene rubber material conforming to BS F 156. Specification
BS F 164:2006. Properties of elastomeric toroidal sealing rings ("O" rings) manufactured from fluorosilicone rubber material released to BS F 154. Specification
BS G 102:1971. Specification for general requirements for rotating electrical machinery
BS G 118:1949. Specification for aircraft magnetic compass, direct-reading
BS G 122:1949. Specification for aircraft magnetic compass, remote-reading (gyro-stabilized)
BS G 123:1949. Specification for aircraft magnetic compass, remote-reading (non-stabilized)
BS G 125:1950. Specification for turn and slip indicators for aircraft purposes
BS G 133:1951. Specification for electro-magnetic indicators for extra low voltage aircraft systems
BS G 142:1953. Specification for heavy duty, electro-magnetically operated, single-pole circuit-breakers for extra-low voltage d.c. systems in aircraft
BS G 152:1956. Specification for a.c. electrically-operated artificial horizons for aircraft
BS G 154:1958. Screws with captive washers for aircraft
BS G 174:1959. Invertors for secondary electrical supplies for aircraft
BS G 175:1959. Aircraft fuel nozzle grounding plugs and sockets
BS G 176-1:1960. Specification for cartridge fuses for aircraftGeneral requirements
BS G 176-2:1960. Specification for cartridge fuses for aircraft.Cartridge fuses and fuse-links (Type A)
BS G 176-3:1961. Specification for cartridge fuses for aircraftCartridge fuse-links (Type B)
BS G 176-4:1962. Specification for cartridge fuses for aircraftCartridge fuse-links (Type C)
BS G 176-5:1966. Specification for cartridge fuses for aircraftCartridge fuse-links (Type D)
BS G 177:1961. Specification for Nyvin type electrical cables for aircraft
BS G 179-1:1962. Specification for hand-operated circuit-breakers for aircraftSingle-pole circuit-breakers
BS G 179-2:1966. Specification for hand-operated circuit-breakers for aircraftThree-pole circuit-breakers
BS G 183:1963. Specification for interconnections in analogue data transmission systems in aircraft
BS G 184 to G 188:1964. Specification for aluminium terminal ends and in-line connectors for hexagonal crimping to aircraft aluminium electrical cables
BS G 189:1964. Specification for Tersil type electrical cables for aircraft
BS G 190:1964. Specification for cabin altimeters for aircraft
BS G 191:1965. Specification for lighting for aircraft indicators using integral filament lamps
BS G 192:1965. Specification for Efglas type electric cables with copper conductors for aircraft
BS G 193:1966. Specification for aircraft lampholders
BS G 194:1965. Specification for lever-operated manual switches for aircraft
BS G 195:1966. Specification for Minyvin type electric cables for aircraft
BS G 198-5:1997. Sleeves and moulded components for aircraft electric cables and equipment wiresSpecification for heat shrinkable moulded shapes
BS G 200:1967. Specification for miniature lever-operated manual switches
BS G 201:1967. Specification for counter and pointer pressure altimeters
BS G 202:1968. Specification for design and performance requirements for aircraft electrical plugs and sockets for d.c. and low frequency a.c. applications
BS G 203:1967. Specification for Unified screws with captive facing and locking washers
BS G 204:1967. Specification for copper terminal ends for crimping to electric cables with copper conductors
BS G 206:1969. Specification for Fepsil type electric cables with copper conductors
BS G 207:1969. Specification for aircraft electrical circuit diagrams
BS G 208:1970. Specification for general requirements for electrical relays up to 10 A rating
BS G 209:1970. Specification for transformer rectifier units
BS G 210:1970. Specification for PTFE insulated equipment wires (with silver plated copper conductors)
BS G 211:1971. Specification for reflection-reducing coating of instrument windows and lighting wedges
BS G 212:1971. Specification for general requirements for aircraft electrical cables
BS G 215:1972. Specification for thermocouple extension cables for aircraft (nickel-chromium and nickel-aluminium)
BS G 216:1975. Specification for hand operated, thermally compensated, miniature, single and triple pole circuit breakers
BS G 217:1975. Specification for general requirements for cockpit lighting controllers
BS G 218-1:1975. Specification for proximity switches for aircraft.General requirements
BS G 218-2:1976. Specification. Proximity switches for aircraft.Requirements for magnetic proximity switches incorporating Reed contact units
BS G 218-3:1976. Specification for proximity switches for aircraft.Requirements for inductive proximity switches
BS G 220:1976. Specification. Crimped terminations to stranded flexible thermocouple cables of the nickel-chromium and nickel-aluminium types
BS G 222:1976. Specification for Efglas type electric cables (metric units)
BS G 223:1977. Specification for screen terminating devices for aircraft electric cables
BS G 224:1978. Specification for lever-operated manual switches for aircraft
BS G 225:1979. Specification for performance of environment-resistant terminal junction modules with removable crimp-type contacts
BS G 226:1979. Specification for counter and pointer, servo type, pressure altimeter systems
BS G 227:1979. Specification for Tersil type electric cables (metric units)
BS G 228:1981, ISO 2315-1980. Specification for clearance and fixing dimensions for 2 A and 3 A, two- and four-pole sealed electromagnetic relays for aircraft
BS G 229:1982, ISO 7137-1981. Schedule for environmental conditions and test procedures for airborne equipment
BS G 230:1984. Specification for general requirements for aircraft electrical cables (second series)
BS G 231:1983. Specification for conductors for general purpose aircraft electrical cables and aerospace applications
BS G 232:1984. Specification for electric cables for general airframe or equipment interconnect use (135°C), wrapped insulation
BS G 233:1984. Specification for electric cables for general airframe or equipment interconnect use (135°C), extruded insulation
BS G 234:1984. Specification for self-aligning air flow angle transmitters for use on aircraft
BS G 235:1987. Specification for electric cables for general airframe or equipment interconnect use (150°C), wrapped insulation with silver plated conductors
BS G 236:1987. Specification for electric cables for general airframe or equipment interconnect use (200°C), wrapped insulation with nickel plated conductors
BS G 237:1987. Specification for electric cables for general airframe or equipment interconnect use (200°C), extruded insulation with nickel plated conductors
BS G 238:1987. Specification for electric cables for general airframe or equipment interconnect use (260°C), wrapped insulation with nickel plated conductors
BS G 239:1987. Specification for primary active lithium batteries for use in aircraft
BS G 240:1988. Specification for pressure transducers for use on aircraft
BS G 241:1988. Specification for fire proof electric cables for engine fire zone and airframe use
BS G 242:1989. Specification for data bus interconnecting systems
BS G 243:1990. Specification for igniter cables for engine use (4 kV d.c.)
BS G 244:1989. Code of practice for installation/repair of aircraft electrical interconnection systems
BS G 246:1991. Specification for cable ties for installation under controlled tension on aircraft electric cable harnesses
BS G 247-1:1992. Locator lights for airborne applicationsSpecification for lifejacket lights
BS G 247-2:1995. Locator lights for airborne applicationsSpecification for liferaft lights
BS G 248:1993, ISO 10296:1992. Specification for hybrid remote power controllers. General requirements
BS G 250:1994, ISO 2574:1994. Specification for identification marking of electric cables
BS G 253:1995, ISO 8668-3:1994. Specification for type 1 terminal junction systems
BS G 254:1994, ISO 8668-4:1993. Specification for type 2 terminal junction systems
BS G 255:1994, ISO 8668-5:1992. Specification for type 3 terminal junction systems
BS G 256:1995, ISO 8668-6:1994. Specification for type 4 terminal junction systems
BS G 257-1:1998. Design of electromagnetic hazard protection of civil aircraftGuide to theory and threats
BS G 257-2:1998. Design of electromagnetic hazard protection of civil aircraftGuide to protection
BS G 257-3:2004. Design of electromagnetic hazard protection of civil aircraftGuide to clearance and testing
BS G 258:1995, ISO 8815:1994. Glossary of terms for electrical cables and cable harnesses
BS G 259:1996, ISO 9662:1994. Aircraft equipment. Environmental and operating conditions for airborne equipment. Humidity, temperature and pressure tests
BS G 260:1996, ISO 2669:1995. Environmental tests for aircraft equipment. Steady-state acceleration
BS G 261-1:1996, ISO 5867-1:1996. Specification for aircraft. Electromagnetic relays and contactorsGeneral requirements
BS G 262:1998, ISO/TR 224:1998. Aircraft. Declaration of design and performance for aircraft equipment. Standard form
BS G 264:2005. Specification for avionic data transmission interface systems. Utilities bus
BS HC 10:1974. Specification for nickel-chromium-molybdenum steel castings (1150-1300 MPa)
BS HC 100:1972. Inspection and testing procedure for iron, nickel, copper, cobalt and refractory metal base alloy castings
BS HC 103:1974. Specification for 23% chromium-nickel-tungsten corrosion-resisting steel castings (Cr 23, Ni 11, W 3)
BS HC 104:1974+A3:2013. Specification for 19% chromium-10% nickel niobium-stabilized corrosion-resisting steel castings (460 MPa)
BS HC 105:1974+A2:2013. Specification for 18 % chromium-11 % nickel-2.5 % molybdenum niobium-stabilized corrosion-resisting steel castings (500 MPa)
BS HC 106:1974. Specification for precipitaton hardening chromium-nickel-copper corrosion-resisting steel castings (1250-1500 MPa) (Cr 16, Ni 4, Cu 3)
BS HC 201:1973. Specification for nickel base chromium-aluminium-tungsten-molybdenum-niobium alloy castings (Cr 11.0, Al 6.0, W 3.5, Mo 3.0, Nb 2.0)
BS HC 202:1973. Specification for precipitation hardening nickel base chromium-niobium-molybdenum-iron-tungsten alloy castings (Cr 20.0, Nb 6.6, Mo 6.0, Fe 3.0, W 2.5)
BS HC 203:1973. Specification for precipitation hardening nickel base chromium-aluminium-molybdenum-niobium alloy castings (Cr 13.0, Al 6.0, Mo 4.5, Nb 2.3)
BS HC 204:1973. Specification for nickel base cobalt-chromium-aluminium-titanium-molybdenum alloy castings (Co 15.0, Cr 10.0, Al 5.5, Ti 4.8, Mo 3.0)
BS HC 205:1974. Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy castings (Cr 20, Co 20, Mo 6, Ti 2)
BS HC 206:1975. Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy precision castings (Cr 20, Co 20, Mo 6, Ti 2)
BS HC 207:1979. Specification for nickel base cobalt-tungsten-chromium-aluminium-tantalum-hafnium-titanium alloy castings (Co 10, W 10, Cr 9, Al 5.5, Ta 2.5, Hf 1.5, Ti 1.5)
BS HC 208:1979. Specification for nickel base cobalt-tungsten-chromium-aluminium-molybdenum-titanium-tantalum alloy castings (Co 10, W 10, Cr 9, Al 5.5, Mo 2.5, Ti 1.5, Ta 1.5)
BS HC 209:1979. Specification for low carbon precipitation hardening nickel base chromium-aluminium-molybdenum-niobium alloy castings (Cr 11.5, Al 6, Mo 4, Nb 2)
BS HC 210:1979. Specification for nickel base tungsten-aluminium-chromium-molybdenum alloy castings (W 10.5, Al 6, Cr 6, Mo 2)
BS HC 211:1979. Specification for nickel base chromium-cobalt-molybdenum-aluminium-titanium alloy castings (Cr 15.5, Co 10, Mo 8.3, Al 4.2, Ti 3.6)
BS HC 301:1973. Specification for cobalt base chromium-nickel-tungsten alloy castings (Cr 25.5, Ni 10.5. W 7.5)
BS HC 401:1974. Specification for 18% nickel maraging steel precision castings (1600-1850 MPa)
BS HC 402:1977. Specification for cast iron ring pots (centrifugally cast) (suitable for piston rings up to 200 mm in diameter)
BS HC 403:1977. Specification for high chromium alloy cast iron ring pots (centrifugally cast) (suitable for piston rings up to 400 mm in diameter)
BS HC 404:1977. Specification for chromium-molybdenum alloy cast iron ring pots (suitable for centrifugally cast and sand cast sealing rings, piston rings and cylinder liners)
BS HC 502:1981. Specification for copper base aluminium-nickel-iron alloy castings (620 MPa) (Al 9.5, Ni 5, Fe 5)
BS HC 7:1974. Specification for 3% chromium-molybdenum steel castings (880-1080 MPa)
BS HC 8:1974+A2:2012. Specification for 3% chromium-molybdenum steel castings (1150–1300 MPa)
BS HC 9:1974+A2:2012. Specification for Nickel-chromium-molybdenum steel castings (880–1080 MPa)
BS HD 60269-2:2010, BS 88-2:2010. Low-voltage fusesSupplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to J
BS HD 60269-3:2010, BS 88-3:2010. Low-voltage fusesSupplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications). Examples of standardized systems of fuses A to F
BS HR 10:1972. Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
BS HR 203:1972. Specification for nickel-chromium-titanium heat-resisting alloy plate, sheet and strip (nickel base, Cr 19.5, Ti 0.4)
BS HR 204:1972. Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base Cr 22, Fe 18.5, Mo 9, Co 1.5, W 0.6)
BS HR 205:1989. Nickel-copper alloy sheet and strip: annealed (Nickel base, Cu 31)
BS HR 206:1973. Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
BS HR 207:1973. Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)
BS HR 208:1989. Specification for nickel-chromium-iron alloy sheet, strip and plate: annealed (Nickel base, Cr 15.5, Fe 8)
BS HR 209:1989. Specification for nickel-chromium-cobalt-molybdenum-titanium-aluminium heat-resisting alloy sheet, strip and plate: softened (nickel base, Cr 18, Co 14, Mo 7, Ti 2.2, Al 2.1)
BS HR 240:1972. Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy plate, sheet and strip (cobalt base Cr 20, W 15, Ni 10, Mn 1.5)
BS HR 251:1974. Specification for heat-resisting alloy plate, sheet and strip (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder)
BS HR 3:1972. Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14.8, Mo 5, Al 4.7, Ti 1.2)
BS HR 4:1972. Specification for nickel-chromium-cobalt-aluminium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 15, Co 14.2, Al 5, Mo 4, Ti 4)
BS HR 40:1972. Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy billets, bars and forgings (cobalt base, Cr 20, W 15, Ni 10, Mn 1.5)
BS HR 402:1973. Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold worked and softened seamless tubes (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
BS HR 403:1973. Specification for nickel-chromium-titanium heat-resisting alloy cold-worked and softened seamless tubes (nickel base, Cr 19.5, Ti 0.4)
BS HR 404:1973. Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy cold worked solution treated seamless tubes (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
BS HR 5:1972. Specification for nickel-chromium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 0.4)
BS HR 505:1981. Specification for nickel-chromium-iron-titanium-niobium-aluminium heat-resisting alloy round wire for thread inserts (maximum diameter 2 mm) (nickel base, Cr 15.5, Fe 7.0, Ti 2.5, Nb/Ta 0.95, Al 0.70)
BS HR 506:1989. Nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire: softened (nickel base, Cr 19.5, Co 18, Ti 2.5, Al 1.5)
BS HR 51:1973. Specification for heat-resisting alloy billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 2, Mn 1.5, Mo 1.2, Si 0.7, V 0.3, Fe remainder)
BS HR 52:1973. Specification for heat-resisting alloy billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder)
BS HR 53:1973. Specification for nickel-iron-chromium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 42.5, Cr 12.5, Mo 5.8, Ti 3.0, Fe remainder)
BS HR 55:1980. Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)
BS HR 6:1972. Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)
BS HR 650:1972. Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (limiting ruling section 20 mm)
BS IEC 1000-2-5:1995. Electromagnetic compatibility (EMC). EnvironmentClassification of electromagnetic environments. Basic EMC publication
BS IEC 1000-2-6:1995. Electromagnetic compatibility (EMC). EnvironmentAssessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances
BS IEC 1000-3-5:1994. Electromagnetic compatibility (EMC). LimitsLimitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A
BS IEC 1000-3-6:1996. Electromagnetic compatibility (EMC). LimitsAssessment of emission limits for distorting loads in MV and HV power systems. Basic EMC publication
BS IEC 1000-3-7:1996. Electromagnetic compatibility (EMC). LimitsAssessment of emission limits for fluctuating loads in MV and HV power systems. Basic EMC publication
BS IEC 1000-5-4:1996. Electromagnetic compatibility (EMC). Installation and mitigation guidelinesImmunity to HEMP. Specifications for protective devices against HEMP radiated disturbance. Basic EMC publication
BS IEC 1008-2-2:1990. Specification for residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCCBs)Applicability of the general rules to RCCBs functionally dependent on line voltage
BS IEC 1009-2-2:1991. Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs). Applicablity of the general rules to RCBOsApplicability of the general rules to RCBOs functionally dependent on line voltage
BS IEC 1149:1995. Guide for safe handling and operation of mobile radio equipment
BS IEC 1231:1993. International lamp coding system (ILCOS)
BS IEC 50(481):1996. International electrotechnical vocabularyPrimary cells and batteries
BS IEC 50(806):1996. International electrotechnical vocabularyRecording and reproduction of audio and video
BS IEC 60034-17:1998. Rotating electrical machinesCage induction motors when fed from converters. Application guide
BS IEC 60050(111):1996, IEC 60050-111:1996. International electrotechnical vocabularyPhysics and chemistry
BS IEC 60050(121):1998, IEC 60050-121:1998. International electrotechnical vocabularyElectromagnetism
BS IEC 60050(411):1996, IEC 60050-411:1996. International electrotechnical vocabularyRotating machines
BS IEC 60050(705):1995, IEC 60050-705:1995. International electrotechnical vocabularyRadio wave propagation
BS IEC 60050(715):1996, IEC 60050-715:1996. International electrotechnical vocabularyTelecommunication networks, teletraffic and operation
BS IEC 60050(723):1997. International electrotechnical vocabularyBroadcasting. Sound, television, data
BS IEC 60050-101:1998. International electrotechnical vocabularyMathematics
BS IEC 60050-113:2011. International electrotechnical vocabularyPhysics for electrotechnology
BS IEC 60050-195:1998. International electrotechnical vocabularyEarthing and protection against electric shock
BS IEC 60050-351:1998. International electrotechnical vocabularyAutomatic control
BS IEC 60050-442:1998. International electrotechnical vocabularyElectrical accessories
BS IEC 60050-551:1998. International electrotechnical vocabularyPower electonics
BS IEC 60050-651:1999. International electrotechnical vocabularyLive working
BS IEC 60050-807:1998. International electrotechnical vocabularyDigital recording of audio and video signals
BS IEC 60050-821:1998. International electrotechnical vocabularySignalling and security apparatus for railways
BS IEC 60076-21:2011. Power transformersStandard requirements, terminology, and test code for step-voltage regulators
BS IEC 60076-7:2005. Power transformersLoading guide for oil-immersed power transformers
BS IEC 60076-8:1997, IEC 60076-8:1997. Power transformersApplication guide
BS IEC 60079-19:1993, IEC 60079-19:1993. Electrical apparatus for explosive gas atmospheresRepair and overhaul for apparatus used in explosive atmospheres (other than mines or explosives)
BS IEC 60092-101:1994. Electrical installation in shipsDefinitions and general requirements
BS IEC 60092-201:1994. Electrical installation in shipsSystem design. General
BS IEC 60092-202:1994. Electrical installation in shipsSystem design. Protection
BS IEC 60092-204:1987. Electrical installation in shipsSystem design. Electric and electrohydraulic steering gear
BS IEC 60092-301:1980. Electrical installation in shipsEquipment. Generators and motors
BS IEC 60092-302:1997. Electrical installation in shipsLow-voltage switchgear and controlgear assemblies
BS IEC 60092-303:1980. Electrical installation in shipsEquipment. Transformers for power and lighting
BS IEC 60092-304:1980. Electrical installation in shipsEquipment. Semiconductor convertors
BS IEC 60092-305:1980. Electrical installation in shipsEquipment. Accumulator (storage) batteries
BS IEC 60092-306:1980. Electrical installation in shipsEquipment. Luminaires and accessories
BS IEC 60092-306:2009. Electrical installations in shipsEquipment. Luminaires and lighting accessories
BS IEC 60092-307:1980. Electrical installation in shipsEquipment. Heating and cooking appliances
BS IEC 60092-401:1980. Electrical installation in shipsInstallation and test of completed installation
BS IEC 60092-501:1984. Electrical installation in shipsSpecial features. Electric propulsion plant
BS IEC 60092-501:2007. Electrical installations in shipsSpecial features. Electric propulsion plant
BS IEC 60092-501:2013. Electrical installations in shipsSpecial features. Electric propulsion plant
BS IEC 60092-502:1999. Electrical installation in shipsTankers. Special features
BS IEC 60092-503:1975. Electrical installation in shipsSpecial features. A.C. supply systems with voltages in the range above 1 kV up to and including 11 kV
BS IEC 60092-503:2007. Electrical installations in shipsSpecial features. AC supply systems with voltages in the range of above 1 kV up to and including 15 kV
BS IEC 60092-504:2001. Electrical installations in shipsSpecial features. Control and instrumentation
BS IEC 60092-506:1996. Electrical installation in shipsSpecial features. Ships carrying specific dangerous goods and materials hazardous only in bulk
BS IEC 60092-506:2003. Electrical installations in shipsSpecial features. Ships carrying specific dangerous goods and materials hazardous only in bulk
BS IEC 60092-509:2011. Electrical installations in shipsOperation of electrical installations
BS IEC 60191-1:2007. Mechanical standardization of semiconductor devicesGeneral rules for the preparation of outline drawings of discrete devices
BS IEC 60191-2:1966+A18:2011. Mechanical standardization of semiconductor devicesDimensions
BS IEC 60287-1-1:2006. Electric cables. Calculation of the current ratingCurrent rating equations (100% load factor) and calculation of losses
BS IEC 60287-1-3:2002. Electric cables. Calculation of the current ratingCurrent rating equations (100 % load factor) and calculation of losses
BS IEC 60287-2-1:1994+A2:2006. Electric cables. Calculation of the current ratingThermal resistance
BS IEC 60287-3-2:2012, BS 7769-3-2:2012. Electric cables. Calculation of the current ratingSections on operating conditions. Economic optimization of power cable size
BS IEC 60287-3-3:2007. Electric cables. Calculation of the current ratingSections on operating conditions. Cables crossing external heat sources
BS IEC 60300-3-10:2001. Dependability management. Application guideMaintainability
BS IEC 60300-3-5:2001. Dependability management. Application guideApplication guide. Reliability test conditions and statistical test principles
BS IEC 60300-3-6:1997. Dependability management. Application guideSoftware aspects of dependability
BS IEC 60300-3-7:1999. Dependability management. Application guideApplication guide. Reliability stress screening of electronic hardware
BS IEC 60313:2002. Coaxial connectors used in nuclear laboratory instrumentation
BS IEC 60319:1999. Presentation and specification of reliability data for electronic components
BS IEC 60397:1994. Test methods for batch furnaces with metallic heating resistors
BS IEC 60404-1:2000. Magnetic materialsClassification
BS IEC 60462:2010. Nuclear instrumentation. Photomultiplier tubes for scintillation counting. Test procedures
BS IEC 60489-2:1991. Radio equipment used in mobile services. Methods of measurementTransmitters employing A3E, F3E or G3E emissions
BS IEC 60489-6:1999. Radio equipment used in mobile services. Methods of measurementData equipment
BS IEC 60493-1:2011. Guide for the statistical analysis of ageing test dataMethods based on mean values of normally distributed test results
BS IEC 60515:2007. Nuclear power plants. Instrumentation important to safety. Radiation detectors. Characteristics and test methods
BS IEC 60532:1992. Radiation protection instrumentation. Installed dose ratemeters, warning assemblies and monitors. X and gamma radiation of energy between 50 keV and 7 MeV
BS IEC 60532:2010. Radiation protection instrumentation. Installed dose rate meters, warning assemblies and monitors. X and gamma radiation of energy between 50 keV and 7 MeV
BS IEC 60533:1999. Electrical and electronic installations in ships. Electromagnetic compatibility
BS IEC 60568:2006. Nuclear power plants. Instrumentation important to safety. In-core instrumentation for neutron fluence rate (flux) measurements in power reactors
BS IEC 60605-4:2001. Equipment reliability testingStatistical procedures for exponential distribution. Point estimates, confidence intervals, prediction intervals and tolerance intervals
BS IEC 60605-6:1997. Equipment reliability testingTests for the validity of the constant failure rate or constant failure intensity assumptions
BS IEC 60605-6:2007. Equipment reliability testingTests for the validity and estimation of the constant failure rate and constant failure intensity
BS IEC 60692:1999. Nuclear instrumentation. Density gauges utilizing ionizing radiation. Definitions and test methods
BS IEC 60695-10-2:1995, IEC 60695-10-2:1995. Fire hazard testing. Guidance and test methods for the minimization of the effects of abnormal heat on electrotechnical products involved in firesMethod for testing products made from non-metallic materials for resistance to heat using the ball pressure test
BS IEC 60695-2-20:1995. Fire hazard testing. Glowing/Hot wire based test methodsHot-wire coil ignitability test on materials
BS IEC 60736:1982. Testing equipment for electrical energy meters
BS IEC 60737:2010. Nuclear power plants. Instrumentation important to safety Temperature sensors (in-core and primary coolant circuit). Characteristics and test methods
BS IEC 60747-1:2006+A1:2010. Semiconductor devicesGeneral
BS IEC 60747-10:1991. Semiconductor devicesGeneric specification for discrete devices and integrated circuits
BS IEC 60747-12-1:1995, QC 720101:1995. Discrete semiconductor devices and integrated circuits.Blank detail specification for light emitting/infrared emitting diodes with/without pigtail for fibre optic systems and sub-systems
BS IEC 60747-12-3:1998. Discrete semiconductor devices and integrated circuits.Optoelectronic devices. Blank detail specification for light-emitting diodes (LEDs) for display applications
BS IEC 60747-14-1:2000. Discrete semiconductor devices and integrated circuits. Semiconductor devices. Semiconductor sensorsGeneral and classification
BS IEC 60747-14-1:2010. Semiconductor devicesSemiconductor sensors. Generic specification for sensors
BS IEC 60747-14-2:2000. Discrete semiconductor devices and integrated circuits. Semiconductor devices. Semiconductor sensorsHall elements
BS IEC 60747-14-3:2001, IEC 60747-14-3:2001. Discrete semiconductor devices and integrated circuits. Semiconductor devices. Semiconductor sensorsPressure sensors
BS IEC 60747-14-3:2009. Semiconductor devicesSemiconductor sensors. Pressure sensors
BS IEC 60747-14-4:2011. Semiconductor devices. Discrete devicesSemiconductor accelerometers
BS IEC 60747-14-5:2010. Semiconductor devicesSemiconductor sensors. PN-junction semiconductor temperature sensor
BS IEC 60747-16-2:2001, IEC 60747-16-2:2001. Semiconductor devicesMicrowave integrated circuits. Frequency prescalers
BS IEC 60747-2:2000. Discrete semiconductor devices and integrated circuitsRectifier diodes
BS IEC 60747-4:2007. Semiconductor devices. Discrete devicesMicrowave diodes and transistors
BS IEC 60747-4-1:2000, QC 750115:2000. Microwave diodes and transistors. Microwave field effect transistors. Blank detail specification
BS IEC 60747-4-2:2000, QC 750116:2000. Semiconductor devices. Discrete devicesMicrowave diodes and transistors. Integrated-circuit microwave amplifiers. Blank detail specification
BS IEC 60747-5-4:2006. Semiconductor devices. Discrete devicesOptoelectronic devices. Semiconductor lasers
BS IEC 60747-6:2000. Discrete semiconductor devices and integrated circuitsThyristors
BS IEC 60747-7:2000. Discrete semiconductor devices and integrated circuitsBipolar transistors
BS IEC 60747-7:2010. Semiconductor devices. Discrete devicesBipolar transistors
BS IEC 60747-7-5:2005. Semiconductor devices. Discrete devicesBipolar transistors for power switching applications
BS IEC 60747-8:2000. Discrete semiconductor devices and integrated circuitsField-effect transistors
BS IEC 60747-8:2010. Semiconductor devices. Discrete devicesField-effect transistors
BS IEC 60747-8-4:2004. Discrete semiconductor devicesMetal-oxide semiconductor field-effect transistors (MOSFETs) for power switching applications
BS IEC 60747-9:1998. Semiconductor devices. Discrete devicesInsulated-gate bipolar transistors (IGBTs)
BS IEC 60747-9:2007. Semiconductor devices. Discrete devicesInsulated-gate bipolar transistors (IGBTs)
BS IEC 60748-1:2002. Semiconductor devices. Integrated circuitsGeneral
BS IEC 60748-11:2000. Semiconductor devices. Integrated circuitsSectional specification for semiconductor integrated circuits excluding hybrid circuits
BS IEC 60748-2:1997. Semiconductor devices. Integrated circuitsDigital integrated circuits
BS IEC 60748-2-11:1999. Semiconductor devices. Integrated circuits. Digital integrated circuitsBlank detail specification for single supply integrated circuit, electrically erasable, and programmable read-only memory
BS IEC 60748-2-12:2001, QC 790121:2001. Semiconductor devices. Integrated circuits. Digital integrated circuitsBlank detail specification for programmable logic devices (PLDs)
BS IEC 60748-2-20:2000. Semiconductor devices. Integrated circuits. Digital integrated circuitsFamily specification. Low voltage integrated circuits
BS IEC 60748-2-20:2008. Semiconductor devices. Integrated circuitsDigital integrated circuits. Family specification. Low voltage integrated circuits
BS IEC 60748-23-1:2002. Semiconductor devices. Integrated circuits. Hybrid integrated circuits and film structures. Manufacturing line certificationGeneric specification
BS IEC 60748-23-2:2002. Semiconductor devices. Integrated circuits. Hybrid integrated circuits and film structures. Manufacturing line certificationInternal visual inspection and special tests
BS IEC 60748-23-3:2002. Semiconductor devices. Integrated circuits. Hybrid integrated circuits and film structures. Manufacturing line certificationManufacturers' self-audit checklist and report
BS IEC 60748-23-4:2002. Semiconductor devices. Integrated circuits. Hybrid integrated circuits and film structures. Manufacturing line certificationBlank detail specification
BS IEC 60748-23-5:2003. Semiconductor devices. Integrated circuitsHybrid integrated circuits and film structures. Manufacturing line certification. Procedure for qualification approval
BS IEC 60748-4:1997. Semiconductor devices. Integrated circuitsInterface integrated circuits
BS IEC 60748-4-3:2006. Semiconductor devices. Integrated circuitsInterface integrated circuits. Dynamic criteria for analogue-digital converters (ADC)
BS IEC 60748-5:1997. Semiconductor devices. Integrated circuitsSemicustom integrated circuits
BS IEC 60768:2009. Nuclear power plants. Instrumentation important to safety. Equipment for continuous in-line or on-line monitoring of radioactivity in process streams for normal and incident conditions
BS IEC 60780:1998. Nuclear power plants. Electrical equipment of the safety system. Qualification
BS IEC 60793-2:1998. Optical fibresProduct specifications
BS IEC 60825-8:1999. Safety of laser productsGuidelines for the safe use of medical laser equipment
BS IEC 60853-3:2002. Calculation of the cyclic and emergency current rating of cablesCyclic rating factor for cables of all voltages, with partial drying of the soil
BS IEC 60864-1:1986. Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipmentInterface standards for systems using dedicated interconnections
BS IEC 60870-1-3:1997. Telecontrol equipment and systems. General considerationsGlossary
BS IEC 60874-10-1:1997. Connectors for optical fibres and cables.Detail specification for fibre optic connector type BFOC/2,5 terminated to multimode fibre type A1
BS IEC 60874-10-2:1997. Connectors for optical fibres and cables.Detail specification for fibre optic connector type BFOC/2,5 terminated to single-mode fibre type B1
BS IEC 60874-10-3:1997, QC 910003XX0003:1997. Connectors for optical fibres and cables.Detail specification for fibre optic adaptor type BFOC/2,5 for single and multimode fibre
BS IEC 60874-14-1:1997, QC 910004XX0001:1997. Connectors for optical fibres and cablesDetail specification for fibre optic connector type SC-PC standard terminated to multimode fibre type A1a, A1b
BS IEC 60874-14-3:1997. Detail specification for fibre optic adaptor (simplex) type SC for single-mode fibre
BS IEC 60874-14-4:1997. Detail specification for fibre optic adaptor (simplex) type SC for multimode fibre
BS IEC 60874-14-5:1997. Connectors for optical fibres and cablesDetail specification for fibre optic connector type SC-PC untuned terminated to single-mode fibre type B1
BS IEC 60877:1999. Procedures for ensuring the cleanliness of industrial-process measurement and control equipment in oxygen service
BS IEC 60880:1986. Software for computers in the safety systems of nuclear power stations
BS IEC 60880:2006. Nuclear power plants. Instrumentation and control systems important to safety. Software aspects for computer-based systems performing category A functions
BS IEC 60880-2:2000. Software for computers important to safety for nuclear power plantsSoftware aspects of defence against common cause failures, use of software tools and of pre-developed software
BS IEC 60943:1998. Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals
BS IEC 60951-1:2009. Nuclear power plants. Instrumentation important to safety. Radiation monitoring for accident and post-accident conditionsGeneral requirements
BS IEC 60951-2:2009. Nuclear power plants. Instrumentation important to safety. Radiation monitoring for accident and post-accident conditionsEquipment for continuous off-line monitoring of radioactivity in gaseous effluents and ventilation air
BS IEC 60951-3:2009. Nuclear power plants. Instrumentation important to safety. Radiation monitoring for accident and post-accident conditionsEquipment for continuous high range area gamma monitoring
BS IEC 60951-4:2009. Nuclear power plants. Instrumentation important to safety. Radiation monitoring for accident and post-accident conditionsEquipment for continuous in-line or on-line monitoring of radioactivity in process streams
BS IEC 60987:2007. Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems
BS IEC 60988:2009. Nuclear power plants. Instrumentation important to safety. Acoustic monitoring systems for detection of loose parts: Characteristics, design criteria and operational procedures
BS IEC 61000-2-7:1998. Electromagnetic compatibility (EMC). EnvironmentLow frequency magnetic fields in various environments
BS IEC 61000-3-4:1998. Electromagnetic compatibility (EMC). LimitsLimitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A
BS IEC 61000-3-8:1997. Electromagnetic compatibility (EMC). LimitsGuide to signalling on low-voltage electrical installations. Emission levels, frequency bands and electromagnetic disturbance levels
BS IEC 61000-5-1:1996. Electromagnetic compatibility (EMC). Installation and mitigation guidelinesGeneral considerations. Basic EMC publication
BS IEC 61000-5-2:1997. Electromagnetic compatibility (EMC). Installation and mitigation guidelinesEarthing and cabling
BS IEC 61000-6-6:2003. Electromagnetic compatibility (EMC)Generic standards
BS IEC 61010-3:1997. Safety requirements for electrical equipment for measurement, control, and laboratory useProtocol for the preparation of conformity verification reports for the IEC 61010 series
BS IEC 61010-3-010:1999. Safety requirements for electrical equipment for measurement, control, and laboratory use.Conformity verification report for IEC 61010-2-010, particular requirements for laboratory equipment for the heating of materials
BS IEC 61010-3-020:1999. Safety measurements for electrical equipment for measurement, control,and laboratory useConformity verification report for IEC 61010-2-020. Particular requirements for laboratory centrifuges
BS IEC 61010-3-020:1999. Safety requirements for electrical equipment for measurement, control, and laboratory use.Conformity verification report for IEC 61010-2-020:1992, particular requirements for laboratory centrifuges
BS IEC 61010-3-051:1999. Safety requirements for electrical equipment for measurement, control, and laboratory use.Conformity verification report for IEC 61010-2-051, particular requirements for laboratory equipment for mixing and stirring
BS IEC 61010-3-061:1999. Safety requirements for electrical equipment for measurement, control, and laboratory use.Conformity verification report for IEC 61010-2-061, particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
BS IEC 61010-3-1:1997. Safety requirements for electrical equipment for measurement, control, and laboratory use.Conformity verification report for IEC 61010-1
BS IEC 61051-2:1992+A1:2009, IEC 61051-2:1992. Harmonized system of quality assessment for electric components. Varistors for use in electronic equipmentSectional specification for surge suppression varistors
BS IEC 61097-2:2002. Global maritime distress and safety system (GMDSS)COSPAS-SARSAT EPIRB. Satellite emergency position indicating radio beacon operating on 406 MHz. Operational and performance requirements, methods of testing and required test results
BS IEC 61111:1992. Matting of insulating material for electrical purposes
BS IEC 61112:1992. Blankets of insulating material for electrical purposes
BS IEC 61119-4:1997. Digital audio tape (DAT) cassette systemCharacter pack format
BS IEC 61124:1997. Reliability testing. Compliance tests for constant failure rate and constant failure intensity
BS IEC 61163-2:1998. Reliability stress screeningElectronic components
BS IEC 61182-2:2006. Printed board assembly products. Manufacturing description data and transfer methodologyGeneric requirements
BS IEC 61223-2-10:2000. Evaluation and routine testing in medical imaging departments. Constancy testsX-ray equipment for mammography
BS IEC 61223-2-11:1999. Evaluation and routine testing in medical imaging departments. Constancy testsEquipment for general direct radiography
BS IEC 61223-2-7:1999. Evaluation and routine testing in medical imaging departments. Constancy testsEquipment for intra-oral dental radiography excluding dental panoramic equipment
BS IEC 61223-2-9:1999. Evaluation and routine testing in medical imaging departments. Constancy testsEquipment for indirect radioscopy and indirect radiography
BS IEC 61225:2005. Nuclear power plants. Instrumentation and control systems important to safety. Requirements for electrical supplies
BS IEC 61226:2005. Nuclear power plants. Instrumentation and control systems important to safety. Classification of instrumentation and control functions
BS IEC 61227:2008. Nuclear power plants. Control rooms. Operator controls
BS IEC 61241-4:2001, IEC 61241-4:2001. Electrical apparatus for use in the presence of combustible dustType of protection "pD"
BS IEC 61275:2013. Radiation protection instrumentation. Measurement of discrete radionuclides in the environment. In situ photon spectrometry system using a germanium detector
BS IEC 61292-1:1998. Fibre opticsParameters of amplifier components
BS IEC 61314-1-1:1996, IEC 61314-1-1:1996,QC 880001:1996. Fibre optic fan-outs.Blank detail specification. Environmental categories 1, 2, 3, 5 and 99
BS IEC 61334-1-1:1995, IEC 61334-1-1:1995. Distribution automation using distribution line carrier systems. General considerationsGuide to distribution automation system architecture
BS IEC 61334-1-2:1997, IEC 61334-1-2:1997. Distribution automation using distribution line carrier systems. General considerationsGuide for specification
BS IEC 61334-1-4:1995. Distribution automation using distribution line carrier systems. General considerationsGuide to identification of data transmission parameters concerning medium and low-voltage distribution mains
BS IEC 61334-3-1:1998. Distribution automation using distribution line carrier systems. Mains signalling requirementsFrequency bands and output levels
BS IEC 61334-5-1:1996. Distribution automation using distribution line carrier systems. Lower layer profilesGuide to spread frequency shift keying (S-FSK) profile
BS IEC 61336:1996. Nuclear instrumentation. Thickness measurement systems utilizing ionizing radiation. Definitions and test methods
BS IEC 61340-4-6:2010. ElectrostaticsStandard test methods for specific applications. Wrist straps
BS IEC 61340-4-8:2010. ElectrostaticsStandard test methods for specific applications. Discharge shielding. Bags
BS IEC 61363-1:1998. Electrical installations of ships and mobile and fixed offshore unitsProcedures for calculating short-circuit currents in three-phase a.c.
BS IEC 61366-1:1998. Hydraulic turbines, storage pumps, and pump turbines. Tendering documents.General and annexes
BS IEC 61366-2:1998. Hydraulic turbines, storage pumps, and pump turbines. Tendering documents.Guidelines for technical specifications for Francis turbines
BS IEC 61366-3:1998. Hydraulic turbines, storage pumps, and pump turbines. Tendering documents.Guidelines for technical specifications for Pelton turbines
BS IEC 61366-4:1998. Hydraulic turbines, storage pumps, and pump turbines. Tendering documents.Guidelines for technical specifications for Kaplan and propeller turbines
BS IEC 61366-5:1998. Hydraulic turbines, storage pumps, and pump turbines. Tendering documents.Guidelines for technical specifications for tubular turbines
BS IEC 61366-6:1998. Hydraulic turbines, storage pumps, and pump turbines. Tendering documents.Guidelines for technical specifications for pump-turbines
BS IEC 61366-7:1998. Hydraulic turbines, storage pumps, and pump turbines. Tendering documents.Guidelines for technical specifications for storage pumps
BS IEC 61428:1998. Nuclear instrumentation. Sample containers for gamma-ray spectrometry with Ge-detectors
BS IEC 61435:2013. Nuclear instrumentation. High-purity germanium crystals for radiationdetectors. Measurement methods of basic characteristics
BS IEC 61445:2012. Digital Test Interchange Format (DTIF)
BS IEC 61467:1997. Insulators for overhead lines with a nominal voltage above 1000 V. AC power arc tests on insulator sets
BS IEC 61468:2000. Nuclear power plants. In-core instrumentation. Characteristics and test methods of self-powered neutron detectors
BS IEC 61496-2:1997. Safety of machinery. Electro-sensitive protective equipmentParticular requirements for equipment using active opto-electronic protective devices (AOPDs)
BS IEC 61497:1998. Nuclear power plants. Electrical interlocks for functions important to safety. Recommendations for design and implementation
BS IEC 61501:1998. Nuclear reactor instrumentation. Wide range neutron fluence rate meter. Mean square voltage method
BS IEC 61504:2000. Nuclear power plants. Instrumentation and control systems important to safety. Plant-wide radiation monitoring
BS IEC 61505:1998. Nuclear reactor instrumentation. Boiling water reactors (BWR). Stability monitoring
BS IEC 61513:2001. Nuclear power plants. Instrumentation and control for systems important to safety. General requirements for systems
BS IEC 61513:2011. Nuclear power plants. Instrumentation and control important to safety. General requirements for systems
BS IEC 61520:2000. Metal thermowells for thermometer sensors. Functional dimension
BS IEC 61523-3:2004. Delay and power calculation standardsStandard delay formaty (SDF) for the electronic design process
BS IEC 61526:1998. Radiation protection instrumentation. Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma and beta radiations. Direct reading personal dose equivalent and/or dose equivalent rate dosemeters
BS IEC 61559-1:2009. Radiation protection instrumentation in nuclear facilities. Centralized systems for continuous monitoring of radiation and/or levels of radioactivityGeneral requirements
BS IEC 61577-1:2006. Radiation protection instrumentation. Radon and radon decay product measuring instrumentsGeneral principles
BS IEC 61577-2:2000. Radiation protection instrumentation. Radon and radon decay product measuring instrumentsSpecific requirements for radon measuring instruments
BS IEC 61577-3:2002. Radiation protection instrumentation. Radon and radon decay product measuring instrumentsSpecific requirements for radon decay product measuring instruments
BS IEC 61577-3:2011. Radiation protection instrumentation. Radon and radon decay product measuring instrumentsSpecific requirements for radon decay product measuring instruments
BS IEC 61577-4:2009. Radiation protection instrumentation. Radon and radon decay product measuring instrumentsEquipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR)
BS IEC 61584:2001. Radiation protection instrumentation. Installed, portable or transportable assemblies. Measurement of air kerma direction and air kerma rate
BS IEC 61586:1997. Estimation of the reliability of electrical connectors
BS IEC 61588:2004. Precision clock synchronization protocol for networked measurement and control systems
BS IEC 61588:2008. Precision clock synchronization protocol for networked measurement and control systems
BS IEC 61624:1997. Guidance on the development of lists of maximum allowable temperatures for polymeric compounds used in electrotechnical equipment
BS IEC 61649:1997. Procedures for goodness-of-fit tests, confidence intervals and lower confidence limits for Weibull distributed data
BS IEC 61650:1997. Reliability data analysis techniques. Procedures for comparison of two constant failure rates and two constant failure (event) intensities
BS IEC 61671:2012. IEEE standard for automatic test markup language (ATML) for exchanging automatic test equipment and test information via XML
BS IEC 61691-1-1:2004. Behavioural languagesVHDL language reference manual
BS IEC 61691-1-1:2011. Behavioural languagesVHDL Language reference manual
BS IEC 61691-4:2004. Behavioural languagesVerilog hardware description language
BS IEC 61691-5:2004. Behavioural langagesVITALASIC (application specific integrated circuit) modeling specification
BS IEC 61710:2000. Power law model. Goodness-of-fit tests and estimation methods
BS IEC 61713:2000. Software dependabilty through the software life-cycle processes. Application guide
BS IEC 61745:1998. End-face image analysis procedure for the calibration of optical fibre geometry test sets
BS IEC 61772:2009. Nuclear power plants. Control rooms. Application of visual display units (VDUs)
BS IEC 61831:1999. On-line analyser systems. Guide to design and installation
BS IEC 61832:1999. Analyser systems. Guide to technical enquiry and bid evaluation
BS IEC 61839:2000. Nuclear power plants. Design of control rooms. Functional analysis and assignment
BS IEC 61865:2001. Overhead lines. Calculation of the electrical component of distance between live parts and obstacles. Method of calculation
BS IEC 61882:2001. Hazard and operability studies (HAZOP studies). Application guide
BS IEC 61888:2002. Nuclear power plants. Instrumentation important to safety. Determination and maintenance of trip setpoints
BS IEC 61892-1:2001. Mobile and fixed offshore units. Electrical installationsGeneral requirements and conditions
BS IEC 61892-1:2010. Mobile and fixed offshore units. Electrical installationsGeneral requirements and conditions
BS IEC 61892-2:2005. Mobile and fixed offshore units. Electrical installationsSystem design
BS IEC 61892-2:2012. Mobile and fixed offshore units. Electrical installationsSystem design
BS IEC 61892-3:1999. Mobile and fixed offshore units. Electrical installationsEquipment
BS IEC 61892-3:2007. Mobile and fixed offshore units. Electrical installationsEquipment
BS IEC 61892-3:2012. Mobile and fixed offshore units. Electrical installationsEquipment
BS IEC 61892-5:2000. Mobile and fixed offshore units. Electrical installationsMobile units
BS IEC 61892-5:2010. Mobile and fixed offshore units. Electrical installationsMobile units
BS IEC 61892-6:1999. Mobile and fixed offshore units. Electrical installationsInstallation
BS IEC 61892-6:2007. Mobile and fixed offshore units. Electrical installationsInstallation
BS IEC 61892-7:1997. Mobile and fixed offshore units. Electrical installationsHazardous areas
BS IEC 61892-7:2007. Mobile and fixed offshore units. Electrical installationsHazardous areas
BS IEC 61942:1997. Live working. Gloves and mitts with mechanical protection
BS IEC 62003:2009. Nuclear power plants. Instrumentation and control important to safety. Requirements for electromagnetic compatibility testing
BS IEC 62016:2003. Core model of the electronics domain
BS IEC 62050:2005. VHDL register transfer level (RTL) synthesis
BS IEC 62117:1999. Nuclear reactor instrumentation. Pressurized light water reactors (PWR). Monitoring adequate cooling within the core during cold shutdown.
BS IEC 62118:2000. Nuclear reactor instrumentation. Pressurized water reactor (PWR) of VVER design. Monitoring adequate cooling within the core during cold shutdown
BS IEC 62142:2005. Standard for Verilog register transfer level synthesis
BS IEC 62198:2001. Project risk management. Application guidelines
BS IEC 62232:2011. Determination of RF field strength and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure
BS IEC 62233:2005. Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure
BS IEC 62241:2004. Nuclear power plants. Main control room. Alarm functions and presentation
BS IEC 62243:2005. Artificial intelligence exchange and service tie to all test environments (AI-ESTATE)
BS IEC 62265:2005. Advanced library format (ALF) describing integrated circuit (IC) technology, cells and blocks
BS IEC 62271-37-082:2012. High-voltage switchgear and controlgearStandard practice for the measurement of sound pressure levels on alternating current circuit-breakers
BS IEC 62275:2006. Cable management systems. Cable ties for electrical installations
BS IEC 62342:2007. Nuclear power plants. Instrumentation and control systems important to safety. Management of ageing
BS IEC 62385:2007. Nuclear power plants. Instrumentation and control important to safety. Methods for assessing the performance of safety system instrument channels
BS IEC 62397:2007. Nuclear power plants. Instrumentation and control important to safety. Resistance temperature detectors
BS IEC 62401:2007. Radiation protection instrumentation. Alarming personal radiation devices (PRD) for detection of illicit trafficking of radioactive material
BS IEC 62443-2-1:2010. Industrial communication networks. Network and system securityEstablishing an industrial automation and control system security program
BS IEC 62448:2007. Multimedia systems and equipment. Multimedia e-publishing and e-books. Generic format for e-publishing
BS IEC 62463:2010. Radiation protection instrumentation. X-ray systems for the screening of persons for security and the carrying of illicit items
BS IEC 62465:2010. Nuclear power plants. Instrumentation and control important to safety. Management of ageing of electrical cabling systems
BS IEC 62484:2010. Radiation protection instrumentation. Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material
BS IEC 62523:2010. Radiation protection instrumentation. Cargo/vehicle radiographic inspection system
BS IEC 62525:2007. Standard test interface language (STIL) for digital test vector data
BS IEC 62526:2007. Standard for extensions to standard test interface language (STIL) for semiconductor design environments
BS IEC 62527:2007. Standard for extensions to standard test interface language (STIL) for DC level specification
BS IEC 62528:2007. Standard testability method for embedded core-based integrated circuits
BS IEC 62529:2007. Standard for signal and test definition
BS IEC 62529:2012. IEEE standard for signal and test definition
BS IEC 62530:2007. Standard for SystemVerilog. Unified hardware design, specification and verification language
BS IEC 62530:2011. SystemVerilog. Unified hardware design, specification, and verification language
BS IEC 62531:2007. Standard for Property Specification Language (PSL)
BS IEC 62531:2012. IEEE standard for property specification language (PSL)
BS IEC 62533:2010. Radiation protection instrumentation. Highly sensitive hand-held instruments for photon detection of radioactive material
BS IEC 62534:2010. Radiation protection instrumentation. Highly sensitive hand-held instruments for neutron detection of radioactive material
BS IEC 62566:2012. Nuclear power plants. Instrumentation and control important to safety. Development of HDL-programmed integrated circuits for systems performing category A functions
BS IEC 62613-1:2011. Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems)General requirements
BS IEC 62613-2:2011. Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-SYSTEMS)Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships
BS IEC 62615:2010. Electrostatic discharge sensitivity testing. Transmission line pulse (TLP). Component level
BS IEC 62646:2012. Nuclear power plants. Control rooms. Computer based procedures
BS IEC 62651:2013. Nuclear power plants. Instrumentation important to safety.Thermocouples: characteristics and test methods
BS IEC 62671:2013. Nuclear power plants. Instrumentation and control important to safety. Selection and use of industrial digital devices of limited functionality
BS IEC 796-1:1990. Microprocessor system bus. 8-bit and 16-bit data MULTIBUS IFunctional description with electrical and timing specifications
BS IEC 796-2:1990. Microprocessor system bus. 8-bit and 16-bit data MULTIBUS IMechanical and pin descriptions for the system bus configuration, with edge connectors (direct)
BS IEC 796-3:1990. Microprocessor system bus. 8-bit and 16-bit data MULTIBUS IMechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors
BS IEC 81714-3:1998. Design of graphical symbols for use in the technical documentation of productsClassification of connect nodes, networks and their encoding
BS IEC 823:1990. Microprocessor system bus (VMSbus). Serial sub-system bus of the IEC 821 bus (VMEbus)
BS IEC TR 60825-5:1998. Safety of laser productsManufacturer's checklist for IEC 60825-1
BS IEC TR 61334-5-2:1998, IEC 61334-5-2:1998. Distribution automation using distribution line carrier systems. Lower layer profilesLower layer profiles. Frequency shift keying (FSK) profile
BS IEC TR 62157:2001. Cylindrical machined carbon electrodes. Nominal dimensions
BS IEC TS 60695-9-2:2001. Fire hazard testing. Surface spread of flameSummary and relevance of test methods
BS IEC TS 60825-6:1999. Safety of laser productsSafety of laser products with optical sources, exclusively used for visible information transmission to the human eye
BS IEC TS 61813:2000. Live working. Care, maintenance and in-service testing of aerial devices with insulating booms
BS IEC/IEEE 62582-1:2011. Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methodsGeneral
BS IEC/IEEE 62582-2:2011. Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methodsIndenter modulus
BS IEC/IEEE 62582-3:2012. Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methodsElongation at break
BS IEC/IEEE 62582-4:2011. Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methodsOxidation induction techniques
BS IEC/TR 61838:2001. Nuclear power plants. Use of probabilistic safety asessment for the classification of instrumentation and control functions
BS IEC/TS 60695-8-2:2001. Fire hazard testing. Heat releaseSummary and relevance of test methods
BS ISO 1000:1992. SI units and recommendations for the use of their multiples and of certain other units
BS ISO 10001:2007. Quality management. Customer satisfaction. Guidelines for codes of conduct for organizations
BS ISO 10002:2004. Quality management. Customer satisfaction. Guidelines for complaints handling in organizations
BS ISO 10003:2007. Quality management. Customer satisfaction. Guidelines for dispute resolution external to organizations
BS ISO 10004:2012. Quality management. Customer satisfaction. Guidelines for monitoring and measuring
BS ISO 10005:1995. Quality management. Guidelines for quality plans
BS ISO 10005:2005. Quality management systems. Guidelines for quality plans
BS ISO 10006:1997. Quality management. Guidelines to quality in project management
BS ISO 10006:2003. Quality management systems. Guidelines for quality management in projects
BS ISO 10007:2003. Quality management systems. Guidelines for configuration management
BS ISO 10008:2013. Quality management. Customer satisfaction. Guidelines for business-to-consumer electronic commerce transactions
BS ISO 10012-2:1997. Quality assurance for measuring equipment. Guidelines for control of measuring processes
BS ISO 10013:1995. Guidelines for developing quality manuals
BS ISO 10014:2006. Quality management. Guidelines for realizing financial and economic benefits
BS ISO 10015:1999. Quality management. Guidelines for training
BS ISO 10018:2012. Quality management. Guidelines on people involvement and competence
BS ISO 10019:2005. Guidelines for the selection of quality management system consultants and use of their services
BS ISO 1003:2008. Spices. Ginger (Zingiber officinale Roscoe). Specification
BS ISO 1004-1:2013. Information processing. Magnetic ink character recognitionPrint specifications for E13B
BS ISO 10041-1:2010. Pneumatic fluid power. Electro-pneumatic continuous flow control valvesMain characteristics to include in the supplier's literature
BS ISO 10041-2:2010. Pneumatic fluid power. Electro-pneumatic continuous flow control valvesTest methods to determine main characteristics to include in the supplier's literature
BS ISO 1004-2:2013. Information processing. Magnetic ink character recognitionPrint specifications for CMC7
BS ISO 10044:1995. Banking and related financial services. Information interchange. Documentary credit form
BS ISO 10045:1991. Alpine skis. Binding mounting area. Requirements for test screws
BS ISO 10050:2005. Lubricants, industrial oils and related products (class L). Family T (Turbines). Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD)
BS ISO 10054:1998. Internal combustion compression-ignition engines. Measurement apparatus for smoke from engines operating under steady-state conditions. Filter type smokemeter
BS ISO 10056:2001. Mechanical vibration. Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles
BS ISO 10059-2:2003. Dense shaped refractory materials. Determination of cold compressive strengthTest with packing
BS ISO 10068:2012. Mechanical vibration and shock. Mechanical impedance of the human hand-arm system at the driving point
BS ISO 10069-1:2008. Tools for pressing. Elastomer pressure springsGeneral specification
BS ISO 10069-2:2008. Tools for pressing. Elastomer pressure springsSpecification of accessories
BS ISO 1007:1995. Photography. 135-size film and magazine. Specifications
BS ISO 1007:2000. Photography. 135-size film and magazine. Specifications
BS ISO 10071-1:2001. Tools for pressing. Ball-lock punchesBall-lock punches for light duty
BS ISO 10071-1:2008. Tools for pressing. Ball-lock punchesBall-lock punches for light duty
BS ISO 10071-2:2005. Tools for pressing. Ball-lock punchesBall-lock punches for heavy duty
BS ISO 10072:2004. Tools for moulding. Sprue bushes. Dimensions
BS ISO 10073:2008. Tools for moulding. Support pillars
BS ISO 10074:2010. Anodizing of aluminium and its alloys. Specification for hard anodic oxidation coatings on aluminium and its alloys
BS ISO 1008:1992. Photography. Paper dimensions. Pictorial sheets
BS ISO 10081-4:2007. Classification of dense shaped refractory productsSpecial products
BS ISO 10086-2:2004. Coal. Methods for evaluating flocculants for use in coal preparationFlocculants as filter aids in rotary vacuum filtration systems
BS ISO 1009:1992. Photography. Paper dimensions. Rolls for printers
BS ISO 1009:2000. Photography. Paper dimensions. Rolls for printers
BS ISO 10093:1994. Plastics. Fire tests. Standard ignition sources
BS ISO 10094-1:2010. Pneumatic fluid power. Electro-pneumatic pressure control valvesMain characteristics to include in the supplier's literature
BS ISO 10094-2:2010. Pneumatic fluid power. Electro-pneumatic pressure control valvesTest methods to determine main characteristics to include in the supplier's literature
BS ISO 10099:2001. Pneumatic fluid power. Cylinders. Final examination and acceptance criteria
BS ISO 10100:2001+A1:2012. Hydraulic fluid power. Cylinders. Acceptance tests
BS ISO 10102:2001. Assembly tools for screws and nuts. Double-headed open-ended engineers' wrenches. Length of wrenches and thickness of the heads
BS ISO 10103:2001. Assembly tools for screws and nuts. Double-headed, flat and offset, box wrenches. Length of wrenches and thickness of the heads
BS ISO 10104:2001. Assembly tools for screws and nuts. Double-headed, deep offset and modified offset, box wrenches. Length of wrenches and thickness of the heads
BS ISO 10109-1:1994. Optics and optical instruments. Environmental requirementsGeneral information, definitions, climatic zones and their parameters
BS ISO 10109-1:2006. Optics and photonics. Environmental requirementsGeneral overview, terms and definitions, climatic zones and their parameters
BS ISO 10109-11:2001. Optics and optical instruments. Environmental requirementsOptical instruments for outdoor conditions of use
BS ISO 10109-12:2004. Optics and optical instruments. Environmental requirementsConditions of transport for optical instruments
BS ISO 10109-4:2001. Optics and optical instruments. Environmental requirementsTest requirements for telescopic systems
BS ISO 10109-6:1994. Optics and optical instruments. Environmental requirementsTest requirements for medical optical devices
BS ISO 10109-6:2005. Optics and photonics. Environmental requirementsTest requirements for medical optical devices
BS ISO 10109-7:2001. Optics and optical instruments. Environmental requirementsTest requirements for optical measuring instruments
BS ISO 10109-8:1994. Optics and optical instruments. Environmental requirementsTest requirements for extreme conditions of use
BS ISO 10109-8:2005. Optics and photonics. Environmental requirementsTest requirements for extreme conditions of use
BS ISO 10110-1:1996. Optics and optical instruments. Preparation of drawings for optical elements and systemsGeneral
BS ISO 10110-1:2006. Optics and photonics. Preparation of drawings for optical elements and systemsGeneral
BS ISO 10110-10:1996. Optics and optical instruments. Preparation of drawings for optical elements and systemsTable representing data of a lens element
BS ISO 10110-10:2004. Optics and photonics. Preparation of drawings for optical elements and systemsTable representing data of optical elements and cemented assemblies
BS ISO 10110-11:1996. Optics and photonics. Preparation of drawings for optical elements and systems.Non-toleranced data
BS ISO 10110-12:1997. Optics and optical instruments. Preparation of drawings for optical elements and systemsAspheric surfaces
BS ISO 10110-12:2007+A1:2013. Optics and photonics. Preparation of drawings for optical elements and systemsAspheric surfaces
BS ISO 10110-13:1997. Optics and optical instruments. Preparation of drawings for optical elements and systemsLaser irradiation damage threshold
BS ISO 10110-14:2003. Optics and optical instruments. Preparation of drawings for optical elements and systemsWavefront deformation tolerance
BS ISO 10110-14:2007. Optics and photonics. Preparation of drawings for optical elements and systemsWavefront deformation tolerance
BS ISO 10110-17:2004. Optics and optical instruments. Preparation of drawings for optical elements and systemsLaser irradiation damage threshold
BS ISO 10110-2:1996. Optics and optical instruments. Preparation of drawings for optical elements and systemsMaterial imperfections. Stress birefringence
BS ISO 10110-3:1996. Optics and optical instruments. Preparation of drawings for optical elements and systemsMaterial imperfections. Bubbles and inclusions
BS ISO 10110-4:1997. Optics and optical instruments. Preparation of drawings for optical elements and systemsMaterial imperfections. Inhomogeneity and striae
BS ISO 10110-5:1996. Optics and optical instruments. Preparation of drawings for optical elements and systemsSurface form tolerances
BS ISO 10110-5:2007. Optics and photonics. Preparation of drawings for optical elements and systemsSurface form tolerances
BS ISO 10110-6:1996. Optics and optical instruments. Preparation of drawings for optical elements and systemsCentring tolerances
BS ISO 10110-7:1996. Optics and optical instruments. Preparation of drawings for optical elements and systemsSurface imperfection tolerances
BS ISO 10110-7:2008. Optics and photonics. Preparation of drawings for optical elements and systemsSurface imperfection tolerances
BS ISO 10110-8:1997. Optics and optical instruments. Preparation of drawings for optical elements and systemsSurface texture
BS ISO 10110-8:2010. Optics and photonics. Preparation of drawings for optical elements and systemsSurface texture; roughness and waviness
BS ISO 10110-9:1996. Optics and optical instruments. Preparation of drawings for optical elements and systemsSurface treatment and coating
BS ISO 10113:2006. Metallic materials. Sheet and strip. Determination of plastic strain ratio
BS ISO 10115:2013. Essential oil of tarragon (Artemisia dracunculus L.)
BS ISO 10119:2002. Carbon fibre. Determination of density
BS ISO 1012:1998. Photography. Films in sheets and rolls for general use. Dimensions
BS ISO 10126-1:1991. Banking. Procedures for message encipherment (wholesale).General principles
BS ISO 10126-2:1991. Banking. Procedures for message encipherment (wholesale)DEA algorithm
BS ISO 10129:2006. Plain bearings. Testing of bearing materials. Resistance to corrosion by lubricants under static conditions
BS ISO 10130:2009. Cosmetics. Analytical methods. Nitrosamines. Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC, post-column photolysis and derivatization
BS ISO 10135:1994. Technical drawings. Simplified representation of moulded, cast and forged parts
BS ISO 10147:2004+A1:2008. Pipes and fittings made of crosslinked polyethylene (PE-X). Estimation of the degree of crosslinking by determination of the gel content
BS ISO 10147:2011. Pipes and fittings made of crosslinked polyethylene (PE-X). Estimation of the degree of crosslinking by determination of the gel content
BS ISO 10154:1991. Light gauge metal containers. Three-piece necked-in tinplate aerosol cans. Dimensions of the top end
BS ISO 10155:1995. Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications
BS ISO 10159:2011. Health informatics. Messages and communication. Web access reference manifest
BS ISO 10160:1993. Information and documentation. Open systems interconnection. Interlibrary loan application service definition
BS ISO 10160:1997. Information and documentation. Open systems interconnection. Interlibrary loan application service definition
BS ISO 10161-1:1993. Information and documentation. Open systems interconnection. Interlibrary loan application protocol specificationProtocol specification
BS ISO 10161-1:1997. Information and documentation. Open systems interconnection. Interlibrary loan application protocol specificationProtocol specification
BS ISO 10161-2:1997. Information and documentation. Open systems interconnection. Interlibrary loan application protocol specificationProtocol implementation conformance statement (PICS) proforma
BS ISO 10162:1993. Information and documentation. Open systems interconnection. Search and retrieve application service definition
BS ISO 10163-1:1993. Information and documentation. Open systems interconnection. Search and retrieve application protocol specificationProtocol specification
BS ISO 10185:2004. Tobacco and tobacco products. Vocabulary
BS ISO 10190:2008. Motor cycle chains. Characteristics and test methods
BS ISO 10191:2010. Passenger car tyres. Verifying tyre capabilities. Laboratory test methods
BS ISO 10197:1993. Micrographics. Reader-printers for transparent microforms. Characteristics
BS ISO 10198:1994. Micrographics. Rotary camera for 16 mm microfilm. Mechanical and optical characteristics
BS ISO 10202-2:1996. Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cardsTransaction process
BS ISO 10202-4:1996. Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cardsSecure application modules
BS ISO 10202-5:1998. Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cardsUse of algorithms
BS ISO 10202-7:1998. Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cardsKey management
BS ISO 10202-8:1998. Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cardsGeneral principles and overview
BS ISO 10203:2006. Iron ores. Determination of calcium. Flame atomic absorption spectrometric method
BS ISO 10204:2006. Iron ores. Determination of magnesium. Flame atomic absorption spectrometric method
BS ISO 10209-1:1992. Technical product documentation. VocabularyTerms relating to technical drawings: General and types of drawings
BS ISO 10214:1991. Photography. Processed photographic materials. Filing enclosures for storage
BS ISO 10216:2010. Anodizing of aluminium and its alloys. Instrumental determination of image clarity of anodic oxidation coatings. Instrumental method
BS ISO 10223:1992. Textile machinery. Flat warp knitting machines. Numbering of guide bars
BS ISO 10223:2005. Textile machinery and accessories. Flat warp knitting machines. Numbering of guide bars
BS ISO 10227:1996. Human/human surrogate impact (single shock) testing and evaluation. Guidance on technical aspects
BS ISO 10228:1991. Cross-country skis. Binding mounting area. Requirements for test screws
BS ISO 10228:2011. Cross-country skis. Binding mounting area. Requirements for test screws
BS ISO 10231:2003. Motorcycle tyres. Test methods for verifying tyre capabilities
BS ISO 10241-1:2011. Terminological entries in standardsGeneral requirements and examples of presentation
BS ISO 10241-2:2012. Terminological entries in standardsAdoption of standardized terminological entries
BS ISO 10242-1:1998. Tools for pressing. Punch holder shanksType A
BS ISO 10242-1:2011. Tools for pressing. Punch holder shanksType A
BS ISO 10242-2:2008. Tools for pressing. Punch holder shanksType C
BS ISO 10242-3:2008. Tools for pressing. Punch holder shanksType D
BS ISO 10243:2010+A1:2011. Tools for pressing. Compression springs with rectangular section. Housing dimensions and colour coding
BS ISO 10245-4:2004. Cranes. Limiting and indicating devicesJib cranes
BS ISO 10251:2006. Copper, lead, zinc and nickel concentrates. Determination of mass loss of bulk material on drying
BS ISO 10263-1:2009. Earth-moving machinery. Operator enclosure environmentTerms and definitions
BS ISO 10263-2:2009. Earth-moving machinery. Operator enclosure environmentAir filter element test method
BS ISO 10263-3:2009. Earth-moving machinery. Operator enclosure environmentPressurization test method
BS ISO 10263-4:2009. Earth-moving machinery. Operator enclosure environmentHeating, ventilating and air conditioning (HVAC) test method and performance
BS ISO 10263-5:2009. Earth-moving machinery. Operator enclosure environmentWindscreen defrosting system test method
BS ISO 10263-6:2009. Earth-moving machinery. Operator enclosure environmentDetermination of effect of solar heating
BS ISO 10265:2008. Earth-moving machinery. Crawler machines. Performance requirements and test procedures for braking systems
BS ISO 10275:2007. Metallic materials. Sheet and strip. Determination of tensile strain hardening exponent
BS ISO 10276:2010. Nuclear energy. Fuel technology. Trunnions for packages used to transport radioactive material
BS ISO 10285:2007+A1:2012. Rolling bearings. Sleeve type linear ball bearings. Boundary dimensions and tolerances
BS ISO 10290:1993. Textiles. Cotton yarns. Specifications
BS ISO 10294-1:1996. Fire-resistance tests. Fire dampers for air distribution systemsTest method
BS ISO 10294-2:1999. Fire-resistance tests. Fire dampers for air distribution systemsClassification, criteria and field of application of test results
BS ISO 10294-3:1999. Fire-resistance tests. Fire dampers for air distribution systemsGuidance on the test method
BS ISO 10294-4:2001. Fire-resistance tests. Fire dampers for air distribution systemsTest of thermal release mechanism
BS ISO 10294-5:2005. Fire-resistance tests. Fire dampers for air distribution systemsIntumescent fire dampers
BS ISO 10295-1:2007. Fire tests for building elements and components. Fire testing of service installationsPenetration seals
BS ISO 10295-2:2009. Fire tests for building elements and components. Fire testing of service installationsLinear joint (gap) seals
BS ISO 10298:2010. Determination of toxicity of a gas or gas mixture
BS ISO 10299:2000. Aerospace. Rivets, solid. Material and metric series identification
BS ISO 10300-1:2001. Calculation of load capacity of bevel gearsIntroduction and general influence factors
BS ISO 10300-2:2001. Calculation of load capacity of bevel gearsCalculation of surface durability (pitting)
BS ISO 10300-3:2001. Calculation of load capacity of bevel gearsCalculation of tooth root strength
BS ISO 10302-1:2011. Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devicesAirborne noise measurement
BS ISO 10302-2:2011. Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devicesStructure-borne vibration measurements
BS ISO 10303-1:1994. Industrial automation systems and integration. Product data representation and exchangeOverview and fundamental principles
BS ISO 10303-101:1994. Industrial automation systems and integration. Product data representation and exchangeIntegrated application resources: Draughting
BS ISO 10303-11:1994. Industrial automation systems and integration. Product data representation and exchangeDescription methods: the EXPRESS language reference manual
BS ISO 10303-201:1994. Industrial automation systems and integration. Product data representation and exchangeApplication protocol: Explicit draughting
BS ISO 10303-203:1994. Industrial automation systems and integration. Product data representation and exchangeApplication protocol. Configuration controlled design
BS ISO 10303-21:1994. Industrial automation systems and integration. Product data representation and exchangeImplementation methods. Clear text encoding of the exchange structure
BS ISO 10303-22:1998. Industrial automation systems and integration. Product data representation and exchangeImplementation methods. Standard data access interface
BS ISO 10303-31:1994. Industrial automation systems and integration. Product data representation and exchangeConformance testing methodology and framework: general concepts
BS ISO 10303-32:1998. Industrial automation systems and integration. Product data representation and exchangeConformance testing methodology and framework: Requirements on testing laboratories and clients
BS ISO 10303-41:1994. Industrial automation systems and integration. Product data representation and exchangeIntegrated generic resources. Fundamentals of product description and support
BS ISO 10303-42:1994. Industrial automation systems and integration. Product data representation and exchangeIntegrated generic resources. Geometric and topological representation
BS ISO 10303-43:1994. Industrial automation systems and integration. Product data representation and exchangeIntegrated generic resources: Representation structures
BS ISO 10303-44:1994. Industrial automation systems and integration. Product data representation and exchangeIntegrated generic resources: Product structure configuration
BS ISO 10303-45:1998 (DISK). Industrial automation systems and integration. Product data representation and exchangeIntegrated generic resource: Materials
BS ISO 10303-45:1998. Industrial automation systems and integration. Product data representation and exchangeIntegrated generic resource: Materials
BS ISO 10303-45:1998. Industrial automation systems and integration. Product data representation and exchangeIntegrated generic resource: Materials
BS ISO 10303-46:1994. Industrial automation systems and integration. Product data representation and exchangeIntegrated generic resources: visual presentation
BS ISO 10303-47:1997. Industrial automation systems and integration. Product data representation and exchangeIntegrated generic resource. Shape variation tolerances
BS ISO 10303-49:1998. Industrial automation systems and integration. Product data representation and exchangeIntegrated generic resources: Process structure and properties
BS ISO 10307-1:2009. Petroleum products. Total sediment in residual fuel oilsDetermination by hot filtration
BS ISO 10307-2:2009, BS 2000-390:2009. Petroleum products. Total sediment in residual fuel oilsDetermination using standard procedures for ageing
BS ISO 10312:1995. Ambient air. Determination of asbestos fibres. Direct-transfer transmission electron microscopy method
BS ISO 10315:2000+A1:2011, ISO 10315:2000. Cigarettes. Determination of nicotine in smoke condensates. Gas-chromatographic method
BS ISO 10315:2013. Cigarettes. Determination of nicotine in smoke condensates. Gas-chromatographic method
BS ISO 10317:2008+A1:2013. Rolling bearings. Tapered roller bearings. Designation system
BS ISO 10326-2:2001. Mechanical vibration. Laboratory method for evaluating vehicle seat vibrationApplication to railway vehicles
BS ISO 10328-1:1996. Prosthetics.Structural testing of lower-limb prostheses.Test configurations
BS ISO 10328-2:1996. Prosthetics.Structural testing of lower-limb prostheses.Test samples
BS ISO 10328-3:1996. Prosthetics.Structural testing of lower-limb prostheses.Principal structural tests
BS ISO 10328-4:1996. Prosthetics.Structural testing of lower-limb prostheses.Loading parameters of principal structural tests
BS ISO 10328-5:1996. Prosthetics.Structural testing of lower-limb prostheses.Supplementary structural tests
BS ISO 10328-6:1996. Prosthetics.Structural testing of lower-limb prostheses.Loading parameters of supplementary structural tests
BS ISO 10328-7:1996. Prosthetics.Structural testing of lower-limb prostheses.Test submission document
BS ISO 10328-8:1996. Prosthetics.Structural testing of lower-limb prostheses.Test report
BS ISO 10330:2002. Photography. Synchronizers, ignition circuits and connectors for cameras and photoflash units. Electrical characteristics and test methods
BS ISO 10332:2010. Non-destructive testing of steel tubes. Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness
BS ISO 10347:1999. Worm gears. Geometry of worms. Name plates for worm gear units, centre distances, information to be supplied to gear manufacturer by the purchaser
BS ISO 10348:1993. Photography. Processing wastes. Determination of silver content
BS ISO 10349-1:2002. Photography. Photographic-grade chemicals. Test methodsGeneral
BS ISO 10349-13:2002. Photography. Photographic-grade chemicals. Test methodsDetermination of pH
BS ISO 10349-8:2002. Photography. Photographic-grade chemicals. Test methodsDetermination of volatile matter
BS ISO 10356:1996. Cinematography. Storage and handling of nitrate-base motion-picture films
BS ISO 10361:2000. Textile floor coverings. Production of changes in appearance by means of Vettermann drum and hexapod tumbler testers
BS ISO 10361:2012. Textile floor coverings. Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester
BS ISO 10362-1:1999+A1:2011. Cigarettes. Determination of water in smoke condensatesGas-chromatographic method
BS ISO 10362-2:1994+A1:2011. Cigarettes. Determination of water in smoke condensatesKarl Fischer method
BS ISO 10362-2:2013. Cigarettes. Determination of water in smoke condensatesKarl Fischer method
BS ISO 10368:1992. Freight thermal containers. Remote condition monitoring
BS ISO 10368:2006. Freight thermal containers. Remote condition monitoring
BS ISO 10371:1993. Fibre reinforced plastics. Braided tapes for composite materials reinforcement. Basis for a specification
BS ISO 10372:1992. Hydraulic fluid power. Four-and five-port servovalves. Mounting surfaces
BS ISO 10376:2011. Pulps. Determination of mass fraction of fines
BS ISO 10378:2005. Copper, lead and zinc sulfide concentrates. Determination of gold and silver. Fire assay gravimetric and flame atomic absorption spectrometric method
BS ISO 10381-1:2002. Soil quality. SamplingGuidance on the design of sampling programmes
BS ISO 10381-2:2002. Soil quality. SamplingGuidance on sampling techniques
BS ISO 10381-3:2001. Soil quality. SamplingGuidance on safety
BS ISO 10381-6:2009. Soil quality. SamplingGuidance on the collection, handling and storage of soil under aerobic conditions for the assessment of microbiological processes, biomass and diversity in the laboratory
BS ISO 10383:2012. Securities and related financial instruments. Codes for exchanges and market identification (MIC)
BS ISO 1039:1995. Cinematography. Cores for motion-picture and magnetic film rolls. Dimensions
BS ISO 10390:2005. Soil quality. Determination of pH
BS ISO 10392:2011. Road vehicles. Determination of centre of gravity
BS ISO 10396:2007. Stationary source emissions. Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
BS ISO 104:2002. Rolling bearings. Thrust bearings. Boundary dimensions, general plan
BS ISO 1041:1973. Essential oils. Determination of freezing point
BS ISO 10414-1:2001. Petroleum and natural gas industries. Field testing of drilling fluidsWater-based fluids
BS ISO 10414-2:2002. Petroleum and natural gas industries. Field testing of drilling fluidsOil-based fluids
BS ISO 10416:2002. Petroleum and natural gas industries. Drilling fluids. Laboratory testing
BS ISO 10425:2003. Steel wire ropes for the petroleum and natural gas industries. Minimum requirements and terms of acceptance
BS ISO 10457:1991. Textile machinery. Dyeing and finishing machines. Nominal speeds
BS ISO 10457:2002. Textile machinery. Dyeing and finishing machines. Nominal speeds
BS ISO 10458:1993. Textile machinery. Square bars for winding devices relating to dyeing and finishing machines. Dimensions
BS ISO 10459:1992. Textile machinery. Dyeing and finishing machines. Designation of operating ranges of component parts
BS ISO 10469:2006. Copper sulfide concentrates. Determination of copper. Electrogravimetric method
BS ISO 10470:2004. Green coffee. Defect reference chart
BS ISO 10474:2013. Steel and steel products. Inspection documents
BS ISO 1048:1991. Photography. Exposed roll films. Identification
BS ISO 10494:1993. Gas turbines and gas turbine sets. Measurement of emitted airborne noise. Engineering/survey method
BS ISO 10502:2012. Aerospace. Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 $0dC and 10 500 kPa. Technical specifications and requirements
BS ISO 10505:2009. Photography. Root mean square granularity of photographic films. Method of measurement
BS ISO 10509:2012. Hexagon flange head tapping screws
BS ISO 1051:1999. Rivet shank diameters
BS ISO 10521-1:2006. Road vehicles. Road loadDetermination under reference atmospheric conditions
BS ISO 10521-2:2006. Road vehicles. Road loadReproduction on chassis dynamometer
BS ISO 10525:1997. Counterbalanced trucks handling freight containers of 6 m (20 ft) length and above. Additional stability tests
BS ISO 10526:1999. CIE standard illuminants for colorimetry
BS ISO 10531:1992. Packaging. Complete, filled transport packages. Stability testing of unit loads
BS ISO 10537:2010. Space data and information transfer systems. Encapsulation service
BS ISO 10540-1:2003. Animal and vegetable fats and oils. Determination of phosphorus contentColorimetric method
BS ISO 10540-2:2003. Animal and vegetable fats and oils. Determination of phosphorus contentMethod using graphite furnace atomic absorption spectrometry
BS ISO 10540-3:2002. Animal and vegetable fats and oils. Determination of phosphorus contentMethod using inductively coupled plasma (ICP) optical emission spectroscopy
BS ISO 10542-1:2001. Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systemsRequirements and test methods for all systems
BS ISO 10542-2:2001. Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systemsFour-point strap-type tiedown systems
BS ISO 10542-3:2005. Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systemsDocking-type tiedown systems
BS ISO 10542-4:2004. Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant restraint systemsClamping-type tiedown systems
BS ISO 10542-5:2004. Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systemsSystems for specific wheelchairs
BS ISO 10550:1994. Micrographics. Planetary camera systems. Test target for checking performance
BS ISO 10551:1995. Ergonomics of the thermal environment. Assessment of the influence of the thermal environment using subjective judgement scales
BS ISO 10552:2012. Timekeeping instruments. Crowns and sealed tubes. Designs and dimensions
BS ISO 10553:2003. Horology. Procedure for evaluating the accuracy of quartz watches
BS ISO 10567:2007. Earth-moving machinery. Hydraulic excavators. Lift capacity
BS ISO 10571:2011. Tyres for mobile cranes and similar specialized machines
BS ISO 10575:2012. Resilient floor coverings. Specification for rubber sheet floor coverings with backing
BS ISO 10577:2012. Resilient floor coverings. Specification for rubber sheet floor coverings without back
BS ISO 10578:1992. Technical drawings. Tolerancing of orientation and location. Projected tolerance zone
BS ISO 10579:1993. Technical drawings. Dimensioning and tolerancing. Non-rigid parts
BS ISO 10585:1996. Information and documentation. Armenian alphabet coded character set for bibliographic information interchange
BS ISO 10586:1996. Information and documentation. Georgian alphabet coded character set for bibliographic information interchange
BS ISO 10587:2000. Metallic and other inorganic coatings. Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods. Inclined wedge method
BS ISO 10594:1997. Micrographics. Rotary camera systems. Test target for checking performance
BS ISO 10594:2006. Micrographics. Rotary camera systems. Test target for checking performance
BS ISO 10596:2009. Ships and marine technology. Marine wind vane and anemometers
BS ISO 10597:2012. Road vehicles. Flat attachment fixing nuts for commercial vehicles. Test methods
BS ISO 105-A08:2001. Textiles. Tests for colour fastnessVocabulary used in colour measurement
BS ISO 105-F02:2009. Textiles. Tests for colour fastnessSpecification for cotton and viscose adjacent fabrics
BS ISO 105-F03:2001. Textiles. Tests for colour fastnessSpecification for polyamide adjacent fabric
BS ISO 105-F04:2001. Textiles. Tests for colour fastnessSpecification for polyester adjacent fabric
BS ISO 105-F05:2001. Textiles. Tests for colour fastnessSpecification for acrylic adjacent fabric
BS ISO 105-F06:2000. Textiles. Tests for colour fastnessSpecification for silk adjacent fabric
BS ISO 105-F07:2001. Textiles. Tests for colour fastnessSpecification for secondary acetate adjacent fabric
BS ISO 105-F09:2009. Textiles. Tests for colour fastnessSpecification for cotton rubbing cloth
BS ISO 105-F10:1989+A1:2009. Textiles. Tests for colour fastnessSpecification for adjacent fabric. Multifibre
BS ISO 105-X16:2001. Textiles. Tests for colour fastnessColour fastness to rubbing. Small areas
BS ISO 10602:1995. Photography. Processed silver-gelatin type black-and-white film. Specifications for stability
BS ISO 10605:2008. Road vehicles. Test methods for electrical disturbances from electrostatic discharge
BS ISO 10617:2010. Textiles. Standard data format for colorimetric communication. Textiles and related measurements
BS ISO 10619-3:2011. Rubber and plastics hoses and tubing. Measurement of flexibility and stiffnessBending tests at high and low temperatures
BS ISO 10625:2005. Equipment for crop protection. Sprayer nozzles. Colour coding for identification
BS ISO 10627-2:1996. Hydraulic agricultural sprayers. Data sheetsTechnical specifications related to components
BS ISO 10631:2013. Metallic butterfly valves for general purposes
BS ISO 10635:1999. Refractory products. Methods of test for ceramic fibre products.
BS ISO 10636:1994. Photography. Processing chemicals. Specification for anhydrous sodium thiosulfate and sodium thiosulfate pentahydrate
BS ISO 10638:2010. Rubber. Identification of antidegradants by gas chromatography/mass spectrometry
BS ISO 10643:2009. Dimensions of accessories for cutting tools and their attachments
BS ISO 10649-1:2010. Cutter arbors with parallel key and tenon driveGeneral dimensions
BS ISO 10649-2:2010. Cutter arbors with parallel key and tenon driveDimensions and designation of tool holders with hollow taper interface with flange contact surface
BS ISO 10649-2:2013. Cutter arbors with parallel key and tenon driveDimensions and designation of tool holders with taper interface with flange contact surface
BS ISO 10649-3:2010. Cutter arbors with parallel key and tenon driveDimensions and designation of tool holders with 7/24 taper for automatic tool changers
BS ISO 10649-4:2010. Cutter arbors with parallel key and tenon driveDimensions and designation of tool holders with 7/24 taper without automatic tool changers
BS ISO 10649-4:2013. Cutter arbors with parallel key and tenon driveDimensions and designation of tool holders with 7/24 taper without automatic tool changer
BS ISO 10649-5:2012. Cutter arbors with parallel key and tenon driveDimensions and designation of tool holders with polygonal taper interface with flange contact surface
BS ISO 10649-6:2012. Cutter arbors with parallel key and tenon driveDimensions and designation of tool holders with modular taper interface with ball track system
BS ISO 10651-5:2006. Lung ventilators for medical use. Particular requirements for basic safety and essential performanceGas-powered emergency resuscitators
BS ISO 10653:1993. Light-gauge metal containers. Round open-top cans. Cans defined by their nominal gross lidded capacities
BS ISO 10654:1993. Light gauge metal containers. Round open-top cans. Cans for liquid products with added gas, defined by their nominal filling volumes
BS ISO 10658:1996. Industrial trucks operating in special conditions of stacking with load laterally displaced by powered devices. Additional stability test
BS ISO 10663:1999. Hexagon nuts with flange. Fine pitch thread
BS ISO 10663:2012. Hexagon nuts with flange, style 2. Fine pitch thread
BS ISO 10667-1:2011. Assessment service delivery. Procedures and methods to assess people in work and organizational settingsRequirements for the client
BS ISO 10667-2:2011. Assessment service delivery. Procedures and methods to assess people in work and organizational settingsRequirements for service providers
BS ISO 10668:2010. Brand valuation. Requirements for monetary brand valuation
BS ISO 10676:2010. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for water purification performance of semiconducting photocatalytic materials by measurement of forming ability of active oxygen
BS ISO 10677:2011. Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet light source for testing semiconducting photocatalytic materials
BS ISO 10678:2010. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue
BS ISO 10679:2010. Steel. Cast tool steel
BS ISO 10681-1:2010. Road vehicles. Communication on FlexRayGeneral information and use case definition
BS ISO 10681-2:2010. Road vehicles. Communication on FlexRayCommunication layer services
BS ISO 10704:2009. Water quality. Measurement of gross alpha and gross beta activity in non-saline water. Thin source deposit method
BS ISO 10705-3:2003, BS 6068-4.16:2003. Water quality. Detection and enumeration of bacteriophagesValidation of methods for concentration of bacteriophages from water
BS ISO 10711:2012. Intelligent Transport Systems. Interface Protocol and Message Set Definition between Traffic Signal Controllers and Detectors
BS ISO 10713:1992. Jewellery. Gold alloy coatings
BS ISO 10716:1994. Paper and board. Determination of alkali reserve
BS ISO 10718:1993. Cork stoppers. Enumeration of colony-forming units of yeasts, moulds and bacteria capable of growth in an alcoholic medium
BS ISO 10718:2002. Cork stoppers. Enumeration of colony-forming units of yeasts, moulds and bacteria capable of growth in an alcoholic medium
BS ISO 10725:2000. Acceptance sampling plans and procedures for the inspection of bulk materials
BS ISO 10727:2002. Tea and instant tea in solid form. Determination of caffeine content. Method using high-performance liquid chromatography
BS ISO 10754:1996. Information and documentation. Extension of the Cyrillic alphabet coded character set for non-Slavic languages for bibliographic information interchange
BS ISO 10756:1994. Graphic technology. Prepress digital data exchange. Colour line art data on magnetic tape
BS ISO 10758:1994. Graphic technology. Prepress digital data exchange. Online transfer from electronic prepress systems to colour hardcopy devices
BS ISO 10759:1994. Graphic technology. Prepress digital data exchange. Monochrome image data on magnetic tape
BS ISO 10762:1997. Hydraulic fluid power. Cylinder mounting dimensions. 10 MPa (100 bar) series
BS ISO 10766:1996. Hydraulic fluid power. Cylinders. Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
BS ISO 10766:2006. Hydraulic fluid power. Cylinders. Housing dimensions for rectangular- section-cut bearing rings for pistons and rods
BS ISO 10767-1:1996. Hydraulic fluid power. Determination of pressure ripple levels generated in systems and componentsPrecision method for pumps
BS ISO 10767-2:1999. Hydraulic fluid power. Determination of pressure ripple levels generated in systems and componentsSimplified method for pumps
BS ISO 10767-3:1999. Hydraulic fluid power. Determination of pressure ripple levels generated in systems and componentsMethod for motors
BS ISO 10770-1:1998. Hydraulic fluid power. Electrically modulated hydraulic control valvesTest methods for four-way directional flow control valves
BS ISO 10770-1:2009. Hydraulic fluid power. Electrically modulated hydraulic control valvesTest methods for four-port directional flow-control valves
BS ISO 10770-2:1998. Hydraulic fluid power. Electrically modulated hydraulic control valvesTest methods for three-way directional flow control valves
BS ISO 10770-2:2012. Hydraulic fluid power. Electrically modulated hydraulic control valvesTest methods for three-port directional flow-control valves
BS ISO 10770-3:2007. Hydraulic fluid power. Electrically modulated hydraulic control valvesTest methods for pressure control valves
BS ISO 10771-1:2002. Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopesTest method
BS ISO 10775:1995. Paper, board and pulps. Determination of cadmium content. Atomic absorption spectrometric method
BS ISO 10775:2013. Paper, board and pulps. Determination of cadmium content. Atomic absorption spectrometric method
BS ISO 10784-1:2011. Space systems. Early operationsSpacecraft initialization and commissioning
BS ISO 10784-2:2011. Space systems. Early operationsInitialization plan
BS ISO 10784-3:2011. Space systems. Early operationsCommissioning report
BS ISO 10785:2011. Space systems. Bellows. Design and operation
BS ISO 10786:2011. Space systems. Structural components and assemblies
BS ISO 10789:2011. Space systems. Programme management. Information and documentation management
BS ISO 10790:1999. Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
BS ISO 10791-1:1998. Test conditions for machining centresGeometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis)
BS ISO 10791-10:2007. Test conditions for machining centresEvaluation of thermal distortions
BS ISO 10791-2:2001. Test conditions for machining centresGeometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis)
BS ISO 10791-3:1998. Test conditions for machining centresGeometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis)
BS ISO 10791-4:1998. Test conditions for machining centresAccuracy and repeatability of positioning of linear and rotary axes
BS ISO 10791-5:1998. Test conditions for machining centresAccuracy and repeatability of positioning of work-holding pallets
BS ISO 10791-6:1998. Test conditions for machining centresAccuracy of feeds, speeds and interpolations
BS ISO 10791-7:1998. Test conditions for machining centresAccuracy of a finished test piece
BS ISO 10791-8:2001. Test conditions for machining centresEvaluation of contouring performance in the three coordinate planes
BS ISO 10791-9:2001. Test conditions for machining centresEvaluation of the operating times of tool change and pallet change
BS ISO 10792-1:1995. Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating linerMetric series
BS ISO 10792-2:1995. Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating linerInch series
BS ISO 10792-3:1995. Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating linerTechnical specification
BS ISO 10794:2011. Space systems. Programme management. Material, mechanical parts and processes
BS ISO 10795:2011. Space systems. Programme management and quality. Vocabulary
BS ISO 10803:2011. Design method for ductile iron pipes
BS ISO 10804:2010. Restrained joint systems for ductile iron pipelines. Design rules and type testing
BS ISO 10810:2010. Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis
BS ISO 10813-1:2004. Vibration generating machines. Guidance for selectionEquipment for environmental testing
BS ISO 10814:1996. Mechanical vibration. Susceptibility and sensitivity of machines to unbalance
BS ISO 10815:1996. Mechanical vibration. Measurement of vibration generated internally in railway tunnels by the passage of trains
BS ISO 10816-1:1995+A1:2009, ISO 10816-1:1995. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating partsGeneral guidelines
BS ISO 10816-2:2001. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating partsLand-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
BS ISO 10816-2:2009. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating partsLand-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
BS ISO 10816-3:2009. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating partsIndustrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min when measured in situ
BS ISO 10816-4:2009. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating partsGas turbine sets with fluid-film bearings
BS ISO 10816-5:2001. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating partsMachine sets in hydraulic power and pumping plants
BS ISO 10816-7:2009. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating partsRotodynamic pumps for industrial applications, including measurements on rotating shafts
BS ISO 10817-1:1999. Rotating shaft vibration measuring systemsRelative and absolute sensing of radial vibration
BS ISO 10823:1996. Guidance on the selection of roller chain drives
BS ISO 10830:2011. Space systems. Non-destructive testing. Automatic ultrasonic inspection method of graphite ingot for solid rocket motors
BS ISO 10833:1992. Textile floor coverings. Determination of mechanical damage at a cut edge. Modified Vettermann drum tester method
BS ISO 10834:1992. Textile floor coverings. Non-destructive measurement of pile thickness above the backing. WRONZ gauge method
BS ISO 10835:2007. Direct reduced iron and hot briquetted iron. Sampling and sample preparation
BS ISO 10836:1994. Iron ores. Method of sampling and sample preparation for physical testing
BS ISO 10838-1:2000. Mechanical fittings for polyethylene piping systems for the supply of gaseous fuelsMetal fittings for pipes of nominal outside diameter less than or equal to 63mm
BS ISO 10838-2:2000. Mechanical fittings for polyethylene piping systems for the supply of gaseous fuelsMetal fittings for pipes of nominal outside diameter greater than 63mm
BS ISO 10838-3:2001. Mechanical fittings for polyethylene piping systems for the supply of gaseous fuelsThermoplastic fittings for pipes of nominal outside diameter less than or equal to 63mm
BS ISO 10840:2003. Plastics. Guidance for the use of standard fire tests
BS ISO 10840:2008. Plastics. Guidance for the use of standard fire tests
BS ISO 10842:2006. Aircraft. Ground service connections. Locations and types
BS ISO 10844:1994. Acoustics. Specification of test tracks for the purpose of measuring noise emitted by road vehicles
BS ISO 10844:2011. Acoustics. Specification of test tracks for measuring noise emitted by road vehicles and their tyres
BS ISO 10845-1:2010. Construction procurementProcesses, methods and procedures
BS ISO 10845-2:2011. Construction procurementFormatting and compilation of procurement documentation
BS ISO 1085:1999. Assembly tools for screws and nuts. Double-ended wrenches. Size pairing
BS ISO 10865-1:2012. Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengersSystems for rearward-facing wheelchair-seated passengers
BS ISO 1087-1:2000. Terminology work. VocabularyTheory and application
BS ISO 1087-2:2000. Terminology work. VocabularyComputer applications
BS ISO 10872:2010. Water quality. Determination of the toxic effect of sediment and soil samples on growth, fertility and reproduction of Caenorhabditis elegans (Nematoda)
BS ISO 1088:2007. Hydrometry. Velocity-area methods using current-meters. Collection and processing of data for determination of uncertainties in flow measurement
BS ISO 10884:1995. Manually portable brush-cutters and grass trimmers with internal combustion engine. Determination of sound power levels. Engineering method (grade 2)
BS ISO 10889-1:1997. Tool holders with cylindrical shankCylindrical shank, location bore. Technical delivery conditions
BS ISO 10889-1:2004. Tool holders with cylindrical shankCylindrical shank, location bore. Technical delivery conditions
BS ISO 10889-2:1997. Tool holders with cylindrical shankType A, shanks for tool holders of special designs
BS ISO 10889-2:2004. Tool holders with cylindrical shankType A, shanks for tool holders of special designs
BS ISO 10889-3:1997. Tool holders with cylindrical shankType B with rectangular radial seat
BS ISO 10889-3:2004. Tool holders with cylindrical shankType B with rectangular radial seat
BS ISO 10889-4:1997. Tool holders with cylindrical shankType C with rectangular axial seat
BS ISO 10889-4:2004. Tool holders with cylindrical shankType C with rectangular axial seat
BS ISO 10889-5:1997. Tool holders with cylindrical shankType D with more than one rectangular seat
BS ISO 10889-6:1997. Tool holders with cylindrical shankType E with cylindrical seat
BS ISO 10889-6:2004. Tool holders with cylindrical shankType E with cylindrical seat
BS ISO 10889-7:1997. Tool holders with cylindrical shankType F with taper seat
BS ISO 10889-7:2004. Tool holders with cylindrical shankType F with taper seat
BS ISO 10889-8:1997. Tool holders with cylindrical shankType Z, accessories
BS ISO 10897:1996. Collets for tool holders with taper ratio 1:10. Collets, holders, nuts
BS ISO 10904:2011. Fibre-cement corrugated sheets and fittings for roofing and cladding
BS ISO 10907-1:2008. Tools for moulding. Locating ringsLocating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B)
BS ISO 10907-2:2007. Tools for moulding. Locating ringsLocating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D)
BS ISO 10911:2010. Solid hardmetal end mills with cylindrical shank. Dimensions
BS ISO 10914:1996. Assembly tools for screws and nuts. Sockets and wrenches for spline drive
BS ISO 10924-1:2009. Road vehicles. Circuit breakersDefinitions and general test requirements
BS ISO 10924-4:2009. Road vehicles. Circuit breakersMedium circuit breakers with tabs (Blade type), Form CB15
BS ISO 10928:2009+A1:2013. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
BS ISO 10931-1:1997. Plastics piping systems for industrial applications. Poly (vinylidene fluoride)General
BS ISO 10931-2:1997. Plastics piping systems for industrial applications. Poly (vinylidene fluoride)Pipes
BS ISO 10931-3:1996. Plastics piping systems for industrial applications. Poly (vinylidene fluoride)Fittings
BS ISO 10932:2010. Milk and milk products. Determination of the minimal inhibitory concentration (MIC) of antibiotics applicable to bifidobacteria and non-enterococcal lactic acid bacteria (LAB)
BS ISO 10934-1:2002. Optics and optical instruments. Vocabulary for microscopyLight microscopy
BS ISO 10934-2:2007. Optics and optical instruments. Vocabulary for microscopyAdvanced techniques in light microscopy
BS ISO 10935:2009. Microscopes. Interfacing connection type C
BS ISO 10936-1:2000. Optics and optical instruments. Operation microscopesRequirements and test methods
BS ISO 10936-2:2001. Optics and optical instruments. Operation microscopesLight hazard from operation microscopes used in ocular surgery
BS ISO 10936-2:2010. Optics and photonics. Operation microscopesLight hazard from operation microscopes used in ocular surgery
BS ISO 10945:1994. Hydraulic fluid power. Gas-loaded accumulators. Dimensions of gas ports
BS ISO 10946:1999. Hydraulic fluid power. Gas-loaded accumulators with separator. Selection of preferred hydraulic ports
BS ISO 10952:2008. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Determination of the resistance to chemical attack for the inside of a section in deflected condition
BS ISO 10955:1999. End-fittings and turnbarrels for aircraft control wire rope. Technical specification
BS ISO 10957:2009. Information and documentation. International standard music number (ISMN)
BS ISO 10959:2000. Aerospace. MJ threads. Gauging
BS ISO 10962:1997. Securities. Classification of financial instruments (CFI code)
BS ISO 10962:2001. Securities and related financial instruments. Classification of Financial Instruments (CFI code)
BS ISO 10965:1998. Textile floor coverings. Determination of electrical resistance
BS ISO 10965:2011. Textile floor coverings. Determination of electrical resistance
BS ISO 10966:2005. Sports and recreational equipment. Fabrics for awnings and camping tents. Specification
BS ISO 10966:2011. Sports and recreational equipment. Fabrics for awnings. Specification
BS ISO 10972-1:1998. Cranes. Requirements for mechanismsGeneral
BS ISO 10975:2009. Tractors and machinery for agriculture. Auto-guidance systems for operator-controlled tractors and self-propelled machines. Safety requirements
BS ISO 10976:2012. Refrigerated light hydrocarbon fluids. Measurement of cargoes on board LNG carriers
BS ISO 10987:2012. Earth-moving machinery. Sustainability. Terminology, sustainability factors and reporting
BS ISO 10988:2011. Equipment for crop protection. Knapsack motorized air-assisted sprayers. Test methods and performance limits
BS ISO 10998:1995. Agricultural wheeled tractors. Steering requirements
BS ISO 10998:2008. Agricultural tractors. Requirements for steering
BS ISO 11001-2:1993. Agricultural wheeled tractors and implements. Three-point hitched couplersA-frame coupler
BS ISO 11001-3:2009. Agricultural wheeled tractors and implements. Three- point hitch couplersLink coupler
BS ISO 11001-4:1994. Agricultural wheeled tractors and implements. Three-point hitch couplersBar coupler
BS ISO 1100-2:1998. Measurement of liquid flow in open channelsDetermination of the stage-discharge relation
BS ISO 11003-1:2001. Adhesives. Determination of shear behaviour of structural adhesivesTorsion test method using butt-bonded hollow cylinders
BS ISO 11003-2:2001. Adhesives. Determination of shear behaviour of structural adhesivesTensile test method using thick adherends
BS ISO 11005:2010. Technical product documentation. Use of main documents
BS ISO 1101:1983. Technical drawings. Geometrical tolerancing. Tolerancing of form, orientation, location and run-out. Generalities, definitions, symbols, indications on drawings
BS ISO 11011:2013. Compressed air. Energy efficiency. Assessment
BS ISO 11012:2009. Heavy commercial vehicles and buses. Open-loop test methods for the quantification of on-centre handling. Weave test and transition test
BS ISO 11021:1999. Essential oils. Determination of water content. Karl Fischer method
BS ISO 11023:1999. Liquorice extracts (Glycyrrhiza glabra L.). Determination of glycyrrhizic acid content. Methods using high-performance liquid chromatography
BS ISO 11026:2010. Heavy commercial vehicles and buses. Test method for roll stability. Closing-curve test
BS ISO 1103:2007. Road vehicles. Coupling balls for caravans and light trailers. Dimensions
BS ISO 11037:2011. Sensory analysis. Guidelines for sensory assessment of the colour of products
BS ISO 11039:2012. Surface chemical analysis. Scanning-probe microscopy. Measurement of drift rate
BS ISO 11040-2:2011. Prefilled syringesPlunger stoppers for dental local anaesthetic cartridges
BS ISO 11040-3:2012. Prefilled syringesSeals for dental local anaesthetic cartridges
BS ISO 11040-4:2007. Prefilled syringes Glass barrels for injectables
BS ISO 11040-5:2012. Prefilled syringesPlunger stoppers for injectables
BS ISO 11040-6:2012. Prefilled syringesPlastic barrels for injectables
BS ISO 11041:1996. Workplace air. Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour. Method by hydride generation and atomic absorption spectrometry
BS ISO 11042-1:1996. Gas turbines. Exhaust gas emissionMeasurement and evaluation
BS ISO 11042-2:1996. Gas turbines. Exhaust gas emissionAutomated emission monitoring
BS ISO 11053:2009. Vegetable fats and oils. Determination of cocoa butter equivalents in milk chocolate
BS ISO 11056:1999+A1:2013. Sensory analysis. Methodology. Magnitude estimation method
BS ISO 11057:2011. Air quality. Test method for filtration characterization of cleanable filter media
BS ISO 11073-90101:2008. Health informatics. Point-of-care medical device communicationAnalytical instruments. Point-of-care test
BS ISO 11073-91064:2009. Health informatics. Standard communication protocolComputer-assisted electrocardiography
BS ISO 11074:2005. Soil quality. Vocabulary
BS ISO 11075:2007. Aircraft. De-icing/anti-icing fluids. ISO type I
BS ISO 11076:2000 Edition 1
BS ISO 11076:2000. Aerospace. Aircraft de-icing/anti-icing methods with fluids
BS ISO 11076:2006. Aircraft. Ground-based de-icing/anti-icing methods with fluids
BS ISO 11076:2012. Aircraft. De-icing/anti-icing methods on the ground
BS ISO 11078:2007. Aircraft. De-icing/anti-icing fluids. ISO type II, III and IV
BS ISO 11084-2:2006. Graphic technology. Register systems for photographic materials, foils and paperRegister pin systems for plate making
BS ISO 11086:1996. Gas turbines. Vocabulary
BS ISO 11088:1993. Assembly, adjustment and inspection of an alpine ski-binding-boot (S-B-B) system
BS ISO 11088:2006+A1:2012. Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system
BS ISO 11089:2010. Rubber, raw synthetic. Determination of antidegradants by high-performance liquid chromatography
BS ISO 11090-1:1998. Machine tools. Test conditions for die sinking electrodischarge machines (EDM). Terminology and testing of accuracy.Single column machines (cross slide table type and fixed table type)
BS ISO 11090-2:1998. Machine tools. Test conditions for die sinking electrodischarge machines (EDM). Terminology and testing of accuracy.Two column machines (slide-head type and cross-slide table type)
BS ISO 11093-1:1994. Paper and board. Testing of coresSampling
BS ISO 11093-2:1994. Paper and board. Testing of coresCo-ordinating of test samples
BS ISO 11093-3:1994. Paper and board. Testing of coresDetermination of moisture content using the oven drying method
BS ISO 11093-4:1997. Paper and board. Testing of coresMeasurement of dimensions
BS ISO 11093-5:1994. Paper and board. Testing of coresDetermination of characteristics of concentric rotation
BS ISO 11093-5:2009. Paper and board. Testing of coresDetermination of characteristics of concentric rotation
BS ISO 11093-6:1996. Paper and board. Testing of coresDetermination of bending strength by the three-point method
BS ISO 11093-6:2005. Paper and board. Testing of coresDetermination of bending strength by the three-point method
BS ISO 11093-7:1997. Paper and board. Testing of coresDetermination of flexural modulus by the three-point method
BS ISO 11093-7:2011. Paper and board. Testing of coresDetermination of flexural modulus by the three-point method
BS ISO 11093-8:1997. Paper and board. Testing of coresDetermination of natural frequency and flexural modulus by experimental modal analysis
BS ISO 11093-8:2012. Paper and board. Testing of coresDetermination of natural frequency and flexural modulus by experimental modal analysis
BS ISO 11093-9:1994. Paper and board. Testing of coresDetermination of flat crush resistance
BS ISO 11093-9:2006. Paper and board. Testing of coresDetermination of flat crush resistance
BS ISO 11095:1996. Linear calibration using reference materials
BS ISO 11096:2002. Road vehicles. Pedestrian protection. Impact test method for pedestrian thigh, leg and knee
BS ISO 11096:2011. Road vehicles. Pedestrian protection. Impact test method for pedestrian thigh, leg and knee
BS ISO 11104:2003. Space data and information transfer systems. Time code formats
BS ISO 11104:2011. Space data and information transfer systems. Time code formats
BS ISO 11107:2009. Recreational diving services. Requirements for training programmes on enriched air nitrox (EAN) diving
BS ISO 11108:1996. Information and documentation. Archival paper. Requirements for permanence and durability
BS ISO 1112:1999. Horology. Functional and non-functional jewels
BS ISO 1112:2009. Horology. Functional and non-functional jewels
BS ISO 11121:2009. Recreational diving services. Requirements for introductory training programmes to scuba diving
BS ISO 11132:2012. Sensory analysis. Methodology. Guidelines for monitoring the performance of a quantitative sensory panel
BS ISO 11140-5:2007. Sterilization of health care products. Chemical indicatorsClass 2 indicators for Bowie and Dick-type air removal tests
BS ISO 11155-2:2009. Road vehicles. Air filters for passenger compartmentsTest for gaseous filtration
BS ISO 11156:2011. Packaging. Accessible design. General requirements
BS ISO 11157:1999. Road vehicles. Brake lining assemblies. Inertia dynamometer test method
BS ISO 11157:2005. Road vehicles. Brake lining assemblies. Inertia dynamometer test method
BS ISO 11158:1997. Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HR, HV and HG
BS ISO 11158:2009. Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HV and HG
BS ISO 1116:1999. Micrographics. 16 mm and 35 mm microfilm spools and reels. Specifications
BS ISO 11166-1:1994. Banking. Key management by means of asymmetric algorithmsPrinciples, procedures and formats
BS ISO 11166-2:1994. Banking. Key management by means of asymmetric algorithmsAlgorithms using the RSA cryptosystem
BS ISO 11168:1995. Socket wrenches for spark and glow plugs
BS ISO 11170:1995. Hydraulic fluid power. Filter elements. Procedure for verifying performance characteristics
BS ISO 11170:2003. Hydraulic fluid power. Filter elements. Sequence of tests for verifying performance characteristics
BS ISO 11170:2013. Hydraulic fluid power. Sequence of tests for verifying performance characteristics of filter elements
BS ISO 11171:1999. Hydraulic fluid power. Calibration of automatic particle counters for liquids
BS ISO 11171:2010. Hydraulic fluid power. Calibration of automatic particle counters for liquids
BS ISO 11174:1996. Workplace air. Determination of particulate cadmium and cadmium compounds. Flame and electro-thermal atomic absorption spectrometric method
BS ISO 11195:1995. Gas mixers for medical use. Stand-alone gas mixers
BS ISO 11209:2012. Ships and marine technology. Large yachts. Deck crane and access gangways strength requirements
BS ISO 1122-1:1998. Vocabulary of gear termsDefinitions related to geometry
BS ISO 11221:2011. Space systems. Space solar panels. Spacecraft charging induced electrostatic discharge test methods
BS ISO 11222:2002. Air quality. Determination of the uncertainty of the time average of air quality measurements
BS ISO 11224:1993. Textiles. Nonwovens. Web formation and bonding. Vocabulary
BS ISO 11224:2003. Textiles. Web formation and bonding in nonwovens. Vocabulary
BS ISO 11227:2012. Space systems. Test procedure to evaluate spacecraft material ejecta upon hypervelocity impact
BS ISO 11228-1:2003. Ergonomics. Manual handlingLifting and carrying
BS ISO 11228-2:2007. Ergonomics. Manual handlingPushing and pulling
BS ISO 11228-3:2007. Ergonomics. Manual handlingHandling of low loads at high frequency
BS ISO 11231:2010. Space systems. Probabilistic risk assessment (PRA)
BS ISO 11235:1999. Rubber compounding ingredients. Sulfenamide accelerators. Test methods
BS ISO 11237-1:2005. Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. SpecificationOil-based fluid applications
BS ISO 11237-2:2006. Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. SpecificationWater-based fluid applications
BS ISO 11243:1994. Cycles. Luggage carriers for bicycles. Concepts, classification and testing
BS ISO 1125:1999+A1:2011. Rubber compounding ingredients. Carbon black. Determination of ash
BS ISO 11256:2007. Iron ore pellets for shaft direct-reduction feedstocks. Determination of the clustering index
BS ISO 11257:2007. Iron ores for shaft direct-reduction feedstocks. Determination of the low-temperature reduction-disintegration index and degree of metallization
BS ISO 11258:2007. Iron ores for shaft direct-reduction feedstocks. Determination of the reducibility index, final degree of reduction and degree of metallization
BS ISO 1126:2006. Rubber compounding ingredients. Carbon black. Determination of loss on heating
BS ISO 11262:2003. Soil quality. Determination of cyanide
BS ISO 11262:2011. Soil quality. Determination of total cyanide
BS ISO 11269-2:2005. Soil quality. Determination of the effects of pollutants on soil floraEffects of chemicals on the emergence and growth of higher plants
BS ISO 11271:2002, BS 7755-3.14:2002. Soil quality. Determination of redox potential. Field method
BS ISO 11274:1998. Soil quality. Determination of the water-retention characteristic. Laboratory methods
BS ISO 11275:2004. Soil quality. Determination of unsaturated hydraulic conductivity and water-retention characteristic. Wind's evaporation method
BS ISO 11277:2009. Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
BS ISO 11285:2004. Milk. Determination of lactulose content. Enzymatic method
BS ISO 11286:2004. Tea. Classification of grades by particle size analysis
BS ISO 11287:2011. Green tea. Definition and basic requirements
BS ISO 113:1999. Rolling bearings. Plummer block housings. Boundary dimensions
BS ISO 113:2010. Rolling bearings. Plummer block housings. Boundary dimensions
BS ISO 11311:2011. Nuclear criticality safety. Critical values for homogeneous plutonium-uranium oxide fuel mixtures outside of reactors
BS ISO 11312:2000. Photography. Sheets of sensitized material for the pre-press industry. Dimensions and related requirements
BS ISO 11313:1994. Photography. Disposable cassettes containing photocomposition film and paper. Dimensions and related requirements
BS ISO 11314:1995. Photography. Projectors. Image size/projection distance calculations
BS ISO 11315-3:1999. Photography. Projection in indoor roomsClassification of transmitting projection screens and measurement of their transmitted luminance levels
BS ISO 11316:1999. Photography. Projection of still pictures. Measuring methods for the evaluation of imaging properties
BS ISO 11318:2002. Cardiac defibrillators. Connector assembly DF-1 for implantable defibrillators. Dimensions and test requirements
BS ISO 11320:2011. Nuclear criticality safety. Emergency preparedness and response
BS ISO 1132-1:2000. Rolling bearings. TolerancesTerms and definitions
BS ISO 1132-2:2001. Rolling bearings. TolerancesMeasuring and gauging principles and methods
BS ISO 11323:1996. Iron ores. Vocabulary
BS ISO 11323:2002. Iron ore and direct reduced iron. Vocabulary
BS ISO 11323:2010. Iron ore and direct reduced iron. Vocabulary
BS ISO 11336-1:2012. Large yachts. Strength, weathertightness and watertightness of glazed openingsDesign criteria, materials, framing and testing of independent glazed openings
BS ISO 11338-1:2003. Stationary source emissions. Determination of gas and particle-phase polycyclic aromatic hydrocarbonsSampling
BS ISO 11338-2:2003. Stationary source emissions. Determination of gas and particle-phase polycyclic aromatic hydrocarbonsSample preparation, clean-up and determination
BS ISO 11342:1998. Mechanical vibration. Methods and criteria for the mechanical balancing of flexible rotors
BS ISO 11344:2004. Rubber, raw synthetic. Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
BS ISO 11345:1997, BS 903-A65:1998. Rubber. Assessment of carbon black dispersion. Rapid comparative methods
BS ISO 11345:2006. Rubber. Assessment of carbon black and carbon black/silica dispersion. Rapid comparative methods
BS ISO 11347:2012. Ships and marine technology. Large yachts. Measurement and assessment of the visual appearance of coatings
BS ISO 11349:2010. Water quality. Determination of low-volatility lipophilic substances. Gravimetric method
BS ISO 11350:2012. Water quality. Determination of the genotoxicity of water and waste water. Salmonella/microsome fluctuation test (Ames fluctuation test)
BS ISO 11352:2012. Water quality. Estimation of measurement uncertainty based on validation and quality control data
BS ISO 11357-2:1999. Plastics. Differential scanning calorimetry (DSC)Determination of glass transition temperature
BS ISO 11357-2:2013. Plastics. Differential scanning calorimetry (DSC)Determination of glass transition temperature and glass transition step height
BS ISO 11357-3:1999. Plastics. Differential scanning calorimetry (DSC)Determination of temperature and enthalpy of melting and crystallization
BS ISO 11357-5:1999. Plastics. Differential scanning calorimetry (DSC)Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
BS ISO 11357-5:2013. Plastics. Differential scanning calorimetry (DSC)Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
BS ISO 11357-6:2002. Plastics. Differential scanning calorimetry (DSC)Determination of oxidation induction time
BS ISO 11358-2:2005. Plastics. Thermographimetry (TG) of polymersDetermination of activation energy
BS ISO 11359-1:1999. Plastics. Thermomechanical analysis (TMA)General principles
BS ISO 11359-2:1999. Plastics. Thermomechanical analysis (TMA)Determination of coefficient of linear thermal expansion and glass transition temperature
BS ISO 11359-3:2002. Plastics. Thermomechanical analysis (TMA)Determination of penetration temperature
BS ISO 11377:1998. Textile floor coverings. Floor soiling. Test site set-up and soiling evaluation
BS ISO 11378-1:2000. Textile floor coverings. Laboratory soiling testsKappasoil test
BS ISO 11379:1997. Textile floor coverings. Laboratory cleaning procedure using spray extraction
BS ISO 11379:2009. Textile floor coverings. Laboratory cleaning procedure using spray extraction
BS ISO 1138:2007+A1:2012. Rubber compounding ingredients. Carbon black. Determination of sulfur content
BS ISO 11382:2010. Optics and photonics. Optical materials and components. Characterization of optical materials used in the infrared spectral range from 0,78 μm to 25 μm
BS ISO 11393-5:2001. Protective clothing for users of hand-held chain-sawsTest methods and performance requirements for protective gaiters
BS ISO 11396:2012. Crocodile skins. Presentation, description of defects, grading on the basis of defects, size (length) and origin
BS ISO 11398:2012. Raw ostrich skins. Description of defects, guidelines for presentation and grading on basis of defects
BS ISO 11408:1999. Chemical conversion coatings. Black oxide coating on iron and steel. Specification and test methods
BS ISO 11413:2008. Plastics pipes and fittings. Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
BS ISO 11414:2009. Plastics pipes and fittings. Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
BS ISO 11415:1997. Tools for pressing. Die sets
BS ISO 11416:1995. Tennis rackets. Racket components and physical parameters
BS ISO 11418-1:2005. Containers and accessories for pharmaceutical preparationsDrop-dispensing glass bottles
BS ISO 11418-2:2005. Containers and accessories for pharmaceutical preparationsScrew-neck glass bottles for syrups
BS ISO 11418-3:2005. Containers and accessories for pharmaceutical preparationsScrew-neck glass bottles (veral) for solid and liquid dosage forms
BS ISO 11418-4:2005. Containers and accessories for pharmaceutical preparationsTablet glass bottles
BS ISO 11421:1997. Optics and optical instruments. Accuracy of optical transfer function (OTF) measurement
BS ISO 11424:1996. Rubber hoses and tubing for air and vacuum systems for internal-combustion engines. Specification
BS ISO 11425:1996. Rubber hoses and hose assemblies for automobile power-steering systems. Specification
BS ISO 1143:2010. Metallic materials. Rotating bar bending fatigue testing
BS ISO 11431:1993. Building construction. Sealants. Determination of adhesion/cohesion properties after exposure to artificial light through glass
BS ISO 11433:1993+A1:2013, ISO 11433:1993. Nickel alloys. Determination of titanium content. Diantipyrylmethane molecular absorption spectrometric method
BS ISO 11438-1:1993. Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method.General requirements and sample dissolution
BS ISO 11438-2:1993. Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method.Determination of lead content
BS ISO 11438-3:1993. Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method.Determination of antimony content
BS ISO 11438-4:1993. Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method.Determination of tin content
BS ISO 11438-5:1993. Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method.Determination of tellurium content
BS ISO 11438-6:1993. Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method.Determination of thallium content
BS ISO 11438-7:1993. Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method.Determination of silver content
BS ISO 11438-8:1993. Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method.Determination of indium content
BS ISO 11442-5:1999. Technical product documentation. Handling of computer-based technical informationDocumentation in the conceptual design stage of the development phase
BS ISO 11443:2005. Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers
BS ISO 11446-1:2012. Road vehicles. Connectors for the electrical connection of towing and towed vehicles13-pole connectors for vehicles with 12 V nominal supply voltage not intended to cross water fords
BS ISO 11450:1999. Equipment for harvesting and conservation. Round balers. Terminology and commercial specifications
BS ISO 11451-1:2005+A1:2008. Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energyGeneral principles and terminology
BS ISO 11451-3:2007. Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energyOn-board transmitter simulation
BS ISO 11451-4:2006. Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energyBulk current injection (BCI)
BS ISO 11451-4:2013. Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energyBulk current injection (BCI)
BS ISO 11452-10:2009. Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energyImmunity to conducted disturbances in the extended audio frequency range
BS ISO 11452-11:2010. Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energyReverberation chamber
BS ISO 11452-4:2005. Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energyBulk current injection (BCI)
BS ISO 11452-4:2011. Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energyHarness excitation methods
BS ISO 11452-8:2007. Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energyImmunity to magnetic fields
BS ISO 11452-9:2012. Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energyPortable transmitters
BS ISO 11455:1995. Raw optical glass. Determination of birefringence
BS ISO 11460:2007. Two-wheeled motorcycles. Positioning of lighting and light-signalling devices
BS ISO 11461:2001. Soil quality. Determination of soil water content as a volume fraction using coring sleeves. Gravimetric method
BS ISO 11462-1:2001. Guidelines for implementation of statistical process control (SPC)Elements of SPC
BS ISO 11464:2006. Soil quality. Pretreatment of samples for physio-chemical analysis
BS ISO 11471:1995. Agricultural tractors and machinery. Coding of remote hydraulic power services and controls
BS ISO 11475:1999. Paper and board. CIE whiteness, D65/10 degrees (outdoor daylight)
BS ISO 11475:2004. Paper and board. Determination of CIE whiteness, D65/10° (outdoor daylight)
BS ISO 11476:2000. Paper and board. Determination of CIE whiteness, C/2° (indoor illumination conditions)
BS ISO 11476:2010. Paper and board. Determination of CIE whiteness, C/2° (indoor illumination conditions)
BS ISO 11480:1997. Pulp, paper and board. Determination of total chlorine and organically bound chlorine
BS ISO 11485-1:2011. Glass in building. Curved glassTerminology and definitions
BS ISO 11485-2:2011. Glass in building. Curved glassQuality requirements
BS ISO 11486:2006+A1:2012. Motorcycles. Methods for setting running resistance on a chassis dynamometer
BS ISO 11494:2008. Jewellery. Determination of platinum in platinum jewellery alloys. Inductively coupled plasma (ICP) solution-spectrometric method using yttrium as internal standard element
BS ISO 11495:2008. Jewellery. Determination of palladium in palladium jewellery alloys. Inductively coupled plasma (ICP) solution-spectrometric method using yttrium as internal standard element
BS ISO 11500:1997. Hydraulic fluid power. Determination of particulate contamination by automatic counting using the light extinction principle
BS ISO 11500:2008. Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
BS ISO 11505:2012. Surface chemical analysis. General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry
BS ISO 11506:2009. Document management applications. Archiving of electronic data. Computer output microform (COM) / Computer output laser disc (COLD)
BS ISO 11512:1995. Machinery for forestry. Tracked special machines. Performance criteria for brake systems
BS ISO 11513:2011. Gas cylinders. Refillable welded steel cylinders containing materials for subatmospheric gas packaging (excluding acetylene). Design, construction, testing, use and periodic inspection
BS ISO 11515:2013. Gas cylinders. Refillable composite reinforced tubes of water capacity between 450 L and 3000 L. Design, construction and testing
BS ISO 11520-2:2001. Agricultural grain driers. Determination of drying performanceAdditional procedures and crop-specific requirements
BS ISO 11521:1996. Securities. Scheme for interdepository message type
BS ISO 11527:2010. Building construction. Sealants. Test method for the determination of stringiness
BS ISO 11529:2013. Milling cutters. Designation. Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges
BS ISO 11529-1:1998. Milling cutters. DesignationShank type end mills of solid or tipped design
BS ISO 11529-1:2005. Milling cutters. DesignationShank-type end mills of solid or tipped design
BS ISO 11529-2:1998. Milling cutters. DesignationShank type and bore type milling cutters with indexable inserts
BS ISO 11529-2:2005. Milling cutters. DesignationShank-type and bore-type milling cutters with indexable inserts
BS ISO 11532:2012. Aircraft ground equipment. Graphical symbols
BS ISO 11533:1996. Iron ores. Determination of cobalt content. Flame atomic absorption spectrometric method
BS ISO 11533:2009. Iron ores. Determination of cobalt. Flame atomic absorption spectrometric method
BS ISO 11534:2006. Iron ores. Determination of tin. Flame atomic absorption spectrometric method
BS ISO 11535:2006. Iron ores. Determination of various elements. Inductively coupled plasma atomic emission spectrometric method
BS ISO 11542-1:1994. Plastics. Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materialsDesignation system and basis for specifications
BS ISO 11556:1998. Paper and board. Determination of curl using a single vertically suspended test piece
BS ISO 11556:2005. Paper and board. Determination of curl using a single vertically suspended test piece
BS ISO 11561:1999. Ageing of thermal insulation materials. Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
BS ISO 11563:2003. Crude petroleum and petroleum products. Bulk cargo transfer. Guidelines for achieving the fullness of pipelines
BS ISO 11564:1998. Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Naphthylethylenediamine photometric method
BS ISO 11565:1998. Road vehicles. Spark plugs. Test methods and requirements
BS ISO 11565:2006. Road vehicles. Spark-plugs. Test methods and requirements
BS ISO 11566:1996. Carbon fibre. Determination of the tensile properties of single-filament specimens
BS ISO 11567:1995. Carbon fibre. Determination of filament diameter and cross-sectional area
BS ISO 11568-1:2005. Banking. Key management (retail)Principles
BS ISO 11568-2:2005. Banking. Key management (retail)Symmetric ciphers, their key management and life cycle
BS ISO 11568-2:2012. Financial services. Key management (retail)Symmetric ciphers, their key management and life cycle
BS ISO 11568-4:1998. Banking. Key management (retail)Key management techniques using public key cryptography
BS ISO 11568-4:2007. Banking. Key management (retail)Asymmetric cryptosystems. Key management and life cycle
BS ISO 11568-5:1998. Banking. Key management (retail)Key life cycle for public key cryptosystems
BS ISO 11596:2008. Jewellery. Sampling of precious metal alloys for and in jewellery and associated products
BS ISO 11599:1997. Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste
BS ISO 11600:1993. Building construction. Sealants. Classification and requirements
BS ISO 11600:2002. Building construction. Jointing products. Classification and requirements for sealants
BS ISO 11605:1995. Paper and board. Calibration of variable-area flowmeters
BS ISO 11606:1997. Ships and marine technology. Marine electromagnetic compasses
BS ISO 11612:1998. Clothing for protection against heat and flame. Test methods and performance requirements for heat-protective clothing
BS ISO 11614:1999. Reciprocating internal combustion compression-ignition engines. Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
BS ISO 11620:1998. Information and documentation. Library performance indicators
BS ISO 11620:2008. Information and documentation. Library performance indicators
BS ISO 11625:2007. Gas cylinders. Safe handling
BS ISO 11628:1995. Graphic technology. Prints and printing inks. Determination of resistance of prints to acids
BS ISO 11629:2004. Cranes. Measurement of the mass of a crane and its components
BS ISO 11630:1997. Cranes. Measurement of wheel alignment
BS ISO 11631:1998. Measurement of fluid flow. Methods of specifying flowmeter performance
BS ISO 11632:1998. Stationary source emissions. Determination of mass concentration of sulfur dioxide. Ion chromatography method
BS ISO 11639:2010. Aerospace. Part numbering for hose assemblies
BS ISO 11648-1:2003. Statistical aspects of sampling from bulk materialsGeneral principles
BS ISO 11648-2:2001. Statistical aspects of sampling from bulk materialsSampling of particulate materials
BS ISO 11649:2009. Financial services. Core banking. Structured creditor reference to remittance information
BS ISO 11658:2012. Cardiovascular implants and extracorporeal systems. Blood/tissue contact surface modifications for extracorporeal perfusion systems
BS ISO 11663:2009. Quality of dialysis fluid for haemodialysis and related therapies
BS ISO 11665-1:2012. Measurement of radioactivity in the environment. Air: radon-222Origins of radon and its short-lived decay products and associated measurement methods
BS ISO 11665-2:2012. Measurement of radioactivity in the environment. Air: radon-222Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products
BS ISO 11665-3:2012. Measurement of radioactivity in the environment. Air: radon-222Spot measurement method of the potential alpha energy concentration of its short-lived decay products
BS ISO 11665-4:2012. Measurement of radioactivity in the environment. Air: radon-222Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
BS ISO 11665-5:2012. Measurement of radioactivity in the environment. Air: radon-222Continuous measurement method of the activity concentration
BS ISO 11665-6:2012. Measurement of radioactivity in the environment. Air: radon-222Spot measurement method of the activity concentration
BS ISO 11665-7:2012. Measurement of radioactivity in the environment. Air: radon-222Accumulation method for estimating surface exhalation rate
BS ISO 11682:1993. Brush-cutters and grass trimmers. Technical data
BS ISO 11684:1995. Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Safety signs and hazard pictorials. General principles
BS ISO 11698-1:2000. Micrographics. Methods of measuring image quality produced by aperture card scannersCharacteristics of the test images
BS ISO 11698-2:2000. Micrographics. Methods of measuring image quality produced by aperture card scannersQuality criteria and control
BS ISO 1170:2008. Coal and coke. Calculation of analyses to different bases
BS ISO 1170:2013. Coal and coke. Calculation of analyses to different bases
BS ISO 11704:2010. Water quality. Measurement of gross alpha and beta activity concentration in non-saline water. Liquid scintillation counting method
BS ISO 11706:2012. Carbonaceous materials for the production of aluminium. Prebaked anodes. Determination of the fracture energy
BS ISO 11709:2011. Soil quality. Determination of selected coal-tar-derived phenolic compounds using high performance liquid chromatography (HPLC)
BS ISO 1171:2010. Solid mineral fuels. Determination of ash
BS ISO 11711-1:2013. Ships and marine technology. Piping and machinery. Ballast water sampling and analysisDischarge sampling port
BS ISO 11712:2009. Anaesthetic and respiratory equipment. Supralaryngeal airways and connectors
BS ISO 11722:2013. Solid mineral fuels. Hard coal. Determination of moisture in the general analysis test sample by drying in nitrogen
BS ISO 11723:2004. Solid mineral fuels. Determination of arsenic and selenium. Eschka's mixture and hydride generation method
BS ISO 11726:2004. Solid mineral fuels. Guidelines for the validation of alternative methods of analysis
BS ISO 11727:1999. Pneumatic fluid power. Identification of ports and control mechanisms of control valves and other components
BS ISO 1173:2001. Assembly tools for screws and nuts. Drive ends for hand and machine-operated screwdriver bits and connecting parts. Dimensions, torque testing
BS ISO 1174-1:2011. Assembly tools for screws and nuts. Driving squaresDriving squares for hand socket tools
BS ISO 11745:2010. Brazing for aerospace applications. Qualification test for brazers and brazing operators. Brazing of metallic components
BS ISO 11752:2000. Flexible cellular polymeric materials. Moulded and extruded sponge or expanded cellular rubber products. Compressibility test on finished parts
BS ISO 11754:2003. Space data and information transfer systems. Telemetry channel coding
BS ISO 11760:2005. Classification of coals
BS ISO 11783-1:2007. Tractors and machinery for agriculture and forestry. Serial control and communications data networkGeneral standard for mobile data communication
BS ISO 11783-10:2009. Tractors and machinery for agriculture and forestry. Serial control and communications data networkTask controller and management information system data interchange
BS ISO 11783-11:2007. Tractors and machinery for agriculture and forestry. Serial control and communications data networkMobile data element dictionary
BS ISO 11783-11:2011. Tractors and machinery for agriculture and forestry. Serial control and communications data networkMobile data element dictionary
BS ISO 11783-12:2009. Tractors and machinery for agriculture and forestry. Serial control and communications data networkDiagnostics services
BS ISO 11783-13:2007. Tractors and machinery for agriculture and forestry. Serial control and communications data networkFile server
BS ISO 11783-13:2011. Tractors and machinery for agriculture and forestry. Serial control and communications data networkFile server
BS ISO 11783-14:2013. Tractors and machinery for agriculture and forestry. Serial control and communications data networkSequence control
BS ISO 11783-2:2002. Tractors and machinery for agriculture and forestry. Serial control and communications data networkPhysical layer
BS ISO 11783-2:2012. Tractors and machinery for agriculture and forestry. Serial control and communications data networkPhysical layer
BS ISO 11783-3:1998. Tractors and machinery for agriculture and forestry. Serial control and communications data networkData link layer
BS ISO 11783-3:2007. Tractors and machinery for agriculture and forestry. Serial control and communications data networkData link layer
BS ISO 11783-4:2011. Tractors and machinery for agriculture and forestry. Serial control and communications data networkNetwork layer
BS ISO 11783-5:2011. Tractors and machinery for agriculture and forestry. Serial control and communications data networkNetwork management
BS ISO 11783-6:2004. Tractors and machinery for agriculture and forestry. Serial control and communications data networkVirtual terminal
BS ISO 11783-6:2010. Tractors and machinery for agriculture and forestry. Serial control and communications data networkVirtual terminal
BS ISO 11783-7:2002. Tractors and machinery for agriculture and forestry. Serial control and communications data networkImplement messages application layer
BS ISO 11783-7:2009. Tractors and machinery for agriculture and forestry. Serial control and communications data network Implement messages application layer
BS ISO 11783-8:2006. Tractors and machinery for agriculture and forestry. Serial control and communications data networkPower train messages
BS ISO 11783-9:2002. Tractors and machinery for agriculture and forestry. Serial control and communications data networkTractor ECU
BS ISO 11783-9:2012. Tractors and machinery for agriculture and forestry. Serial control and communications data networkTractor ECU
BS ISO 11784:1996+A2:2010. Radio-frequency identification of animals. Code structure
BS ISO 11785:1996. Radio-frequency identification of animals. Technical concept
BS ISO 11786:1995. Agricultural tractors and machinery. Tractor mounted sensor interface. Specification
BS ISO 11787:1995. Machinery for agriculture and forestry. Data interchange between management computer and process computers. Data interchange syntax
BS ISO 11788-1:1997. Electronic data interchange between information systems in agriculture. Agricultural data element dictionary.General description
BS ISO 11788-3:2000. Electronic data interchange between information systems in agriculture. Agricultural data element dictionary.Pig farming
BS ISO 11790:2010. Copper, lead, zinc and nickel concentrates. Guidelines for the inspection of mechanical sampling systems
BS ISO 11794:2010. Copper, lead, zinc and nickel concentrates. Sampling of slurries
BS ISO 11795:1997+A1:2010. Agricultural tractor drive wheel tyres. Method of measuring tyre rolling circumference
BS ISO 11798:1999. Information and documentation. Permanence and durability of writing, printing and copying on paper. Requirements and test methods
BS ISO 11800:1998. Information and documentation. Requirements for binding materials and methods used in the manufacture of books
BS ISO 11807-1:2001. Integrated optics. VocabularyBasic terms and symbols
BS ISO 11807-2:2001. Integrated optics. VocabularyTerms used in classification
BS ISO 11813:1998. Milk and milk products. Determination of zinc content. Flame atomic absorption spectrometric method
BS ISO 11813:2010. Milk and milk products. Determination of zinc content. Flame atomic absorption spectrometric method
BS ISO 11814:2002. Dried milk. Assessment of heat treatment intensity. Method using high-performance liquid chromatography
BS ISO 11815:2007. Milk. Determination of total milk-clotting activity of bovine rennets
BS ISO 11816-1:1997. Milk and milk products. Determination of alkaline phosphatase activity using a fluorimetric methodMilk and milk-based drinks
BS ISO 11822:1996. Information and documentation. Extension of the Arabic alphabet coded character set for bibliographic information interchange
BS ISO 11833-1:1998. Plastics. Unplasticized poly(vinyl chloride) sheets. Tapes, dimensions and characteristicsSheets of thickness not less than 1 mm
BS ISO 11837:2011. Machinery for forestry. Saw chain shot guarding systems. Test method and performance criteria
BS ISO 11839:2010. Machinery for forestry. Glazing and panel materials used in operator enclosures for protection against thrown sawteeth. Test method and performance criteria
BS ISO 11841-1:2000, ISO 11841-1:2000. Road vehicles and internal combustion engines. Filter vocabularyDefinitions of filters and filter components
BS ISO 11841-2:2000. Road vehicles and internal combustion engines. Filter vocabularyDefinitions of characteristics of filters and their components
BS ISO 11843-1:1997. Capability of detectionTerms and definitions
BS ISO 11843-2:2000. Capability of detectionMethodology in the linear calibration case
BS ISO 11843-3:2003. Capability of detectionMethodology for determination of the critical value for the response variable when no calibration data are used
BS ISO 11843-4:2003. Capability of detectionMethodology for comparing the minimum detectable value with a given value
BS ISO 11843-5:2008. Capability of detectionMethodology in the linear and non-linear calibration cases
BS ISO 11843-6:2013. Capability of detectionMethodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
BS ISO 11843-7:2012. Capability of detectionMethodology based on stochastic properties of instrumental noise
BS ISO 11850:2003. Machinery for forestry. Self-propelled machinery. Safety requirements
BS ISO 11852:2011. Rubber. Determination of magnesium content of field and concentrated natural rubber latex by titration
BS ISO 11858:1999. Textile floor coverings. Determination of friability of attached foams
BS ISO 11859:1999. Textile floor coverings. Pure wool, hand-knotted pile carpets. Specification
BS ISO 11860:1999. Textile floor coverings. Jute carpet backing fabric. Specification
BS ISO 11861:1999. Textile floor coverings. Coir mats. Types and specification
BS ISO 11863:2011. Buildings and building-related facilities. Functional and user requirements and performance. Tools for assessment and comparison
BS ISO 11865:2009. Instant whole milk powder. Determination of white flecks number
BS ISO 11866-1:1997. Milk and milk products. Enumeration of presumptive Escherichia coliMost probable number technique
BS ISO 11866-1:2005. Milk and milk products. Enumeration of presumptive Escherichia coliMost probable number technique using 4-methylumbelliferyl-β-D-glucuron ide(MUG)
BS ISO 11866-2:1997. Milk and milk products. Enumeration of presumptive Escherichia coliMost probable number technique using 4-methylumbelliferyl-β-D-glucuronide (MUG)
BS ISO 11866-2:2005. Milk and milk products. Enumeration of presumptive Escherichia coliColony-count technique at 44°C using membranes
BS ISO 11866-3:1997. Milk and milk products. Enumeration of presumptive Escherichia coliColony-count technique at 44°C using membranes
BS ISO 11868:2007. Heat-treated milk. Determination of lactulose content. Method using high-performance liquid chromatography
BS ISO 11870:2000. Milk and milk products. Determination of fat content. General guidance on the use of butyrometric methods
BS ISO 11870:2009. Milk and milk products. Determination of fat content. General guidance on the use of butyrometric methods
BS ISO 11873:2005. Hardmetals. Determination of sulfur and carbon contents in cobalt metal powders. Infrared detection method
BS ISO 11877:2008. Hardmetals. Determination of silicon in cobalt metal powders. Photometric method
BS ISO 11884-1:2006. Optics and photonics. Minimum requirements for stereomicroscopesStereomicroscopes for general use
BS ISO 11884-2:2007. Optics and photonics. Minimum requirements for stereomicroscopesHigh performance microscopes
BS ISO 11886:2002. Building construction machinery and equipment. Pile driving and extracting equipment. Terminology and commercial specifications
BS ISO 1189:1986. Cinematography. Recorded characteristic for magnetic sound records on 35 mm motion-picture film excluding striped release prints. Specifications
BS ISO 11891:2012. Hot formed helical compression springs. Technical specifications
BS ISO 11892:2012. Space systems. Subsystems/units to spacecraft interface control document
BS ISO 11893:2011. Space systems. Programme management. Project organization
BS ISO 11894-1:2013. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for conductivity measurement of ion-conductive fine ceramicsOxide-ion-conducting solid electrolytes
BS ISO 11898-3:2006. Road vehicles. Controller area network (CAN)Low-speed, fault-tolerant, medium-dependent interface
BS ISO 11898-5:2007. Road vehicles. Controller area network (CAN)High-speed medium access unit with low-power mode
BS ISO 11900-1:2007. Tools for pressing. Ball-lock punch retainersTypes A and B, rectangular and square for light duty
BS ISO 11900-2:2001. Tools for pressing. Ball-lock punch retainersTypes C and D, reduced for light duty
BS ISO 11900-2:2008. Tools for pressing. Ball-lock punch retainersTypes C and D, reduced for light duty
BS ISO 11900-3:2004. Tools for pressing. Ball-lock punch retainersType E, reduced for heavy duty
BS ISO 11901-1:2003. Tools for pressing. Gas springsGeneral specifications
BS ISO 11901-2:2004. Tools for pressing. Gas springsSpecification of accessories
BS ISO 11903:2008. Tools for pressing. Guide pillar mountings
BS ISO 11907-1:1998. Plastics. Smoke generation. Determination of the corrosivity of fire effluentsGuidance
BS ISO 11907-2:1995. Plastics. Smoke generation. Determination of the corrosivity of fire effluentsStatic method
BS ISO 11907-3:1998. Plastics. Smoke generation. Determination of the corrosivity of fire effluentsDynamic decomposition method using a travelling furnace
BS ISO 11907-4:1998. Plastics. Smoke generation. Determination of the corrosivity of fire effluentsDynamic decomposition method using a conical radiant heater
BS ISO 11916-1:2013. Soil quality. Determination of selected explosives and related compoundsMethod using high-performance liquid chromatography (HPLC) with ultraviolet detection
BS ISO 11916-2:2013. Soil quality. Determination of selected explosives and related compoundsMethod using gas chromatography (GC) with electron capture detection (ECD) or mass spectrometric detection (MS)
BS ISO 11922-1:1997. Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances.Metric series
BS ISO 11922-2:1997. Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances.Inch-based series
BS ISO 11925-2:1997. Reaction to fire tests. Ignitability of building products subjected to direct impingement of flameSingle flame source test
BS ISO 11925-3:1997. Reaction to fire tests. Ignitability of building products subjected to direct impingement of flameMulti-source test
BS ISO 11928-1:2000. Micrographics. Quality control of graphic COM recordersCharacteristics of the test frames
BS ISO 11928-2:2000. Micrographics. Quality control of graphic COM recordersQuality criteria and control
BS ISO 11929:2010. Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation. Fundamentals and application
BS ISO 11929-1:2000. Determination of the detection limit and decision threshold for ionizing radiation measurementsFundamentals and application to counting measurements without the influence of sample treatment
BS ISO 11929-2:2000. Determination of the detection limit and decision threshold for ionizing radiation measurementsFundamentals and application to counting measurements with the influence of sample treatment
BS ISO 11929-3:2000. Determination of the detection limit and decision threshold for ionizing radiation measurementsFundamentals and application to counting measurements by high resolution gamma spectrometry, without the influence of sample treatment
BS ISO 11929-4:2001. Determination of the detection limit and decision threshold for ionizing radiation measurementsFundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment
BS ISO 11929-5:2005. Determination of the detection limit and decision threshold for ionizing radiation measurementsFundamentals and applications to counting measurements on filters during accumulation of radioactive material
BS ISO 11929-6:2005. Determination of the detection limit and decision threshold for ionizing radiation measurementsFundamentals and applications to measurements by use of transient mode
BS ISO 11929-7:2005. Determination of the detection limit and decision threshold for ionizing radiation measurementsFundamentals and general applications
BS ISO 11929-8:2005. Determination of the detection limit and decision threshold for ionizing radiation measurementsFundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment
BS ISO 11938:2012. Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
BS ISO 11943:1999. Hydraulic fluid power. On-line automatic particle-counting systems for liquids. Methods of calibration and validation
BS ISO 11944:1993. Round general use light gauge metal containers. Nominal diameters for cylindrical and tapered cans up to 10 000 ml capacity
BS ISO 11948-1:1996. Urine-absorbing aidsWhole-product testing
BS ISO 11948-2:1998. Urine-absorbing aidsDetermination of short-time liquid release (leakage) under conditions of light incontinence and low pressure
BS ISO 11962:2002. Micrographics. Image mark (blip) used with 16 mm and 35 mm roll microfilm
BS ISO 11971:2008. Steel and iron castings. Visual examination of surface quality
BS ISO 11979-3:1999. Ophthalmic implants. Intraocular lensesMechanical properties and test methods
BS ISO 11992-4:2005. Road vehicles. Interchange of digital information on electrical connections between towing and towed vehiclesDiagnostics
BS ISO 11994:1997. Cranes. Availability. Vocabulary
BS ISO 12000:1996. Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Definitions and review of test methods
BS ISO 12000:2000. Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Definitions and review of test methods
BS ISO 12003-1:2002. Agricultural and forestry tractors. Narrow-track wheeled tractorsFront-mounted roll-over protective structures
BS ISO 12003-1:2008. Agricultural and forestry tractors. Roll-over protective structures on narrow-track wheeled tractorsFront-mounted ROPS
BS ISO 12003-2:2002. Agricultural and forestry tractors. Narrow-track wheeled tractorsRear-mounted roll-over protective structures
BS ISO 12003-2:2008. Agricultural and forestry tractors. Roll-over protective structures on narrow-track wheeled tractorsRear-mounted ROPS
BS ISO 12006-2:2001. Building construction. Organization of information about construction worksFramework for classification of information
BS ISO 12006-3:2007. Building construction. Organization of information about construction worksFramework for object-oriented information
BS ISO 12010:2012. Water quality. Determination of short-chain polychlorinated alkanes (SCCPs) in water. Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)
BS ISO 12013-1:2012. Paints and varnishes. Determination of curing characteristics using a free damped oscillation methodStart temperature of the curing reaction
BS ISO 12013-2:2012. Paints and varnishes. Determination of curing characteristics using a free damped oscillation methodGlass transition temperature
BS ISO 1202:1981. Essential oils. Determination of 1,8-cineole content
BS ISO 12021:2010. Road vehicles. Sensitivity to lateral wind. Open-loop test method using wind generator input
BS ISO 1203:1998. Photography. Roll film cameras. Back window location
BS ISO 12040:1997. Graphic technology. Prints and printing inks. Assessment of light fastness using filtered xenon arc light
BS ISO 12043:1995. Rolling bearings. Single-row cylindrical roller bearings. Chamfer dimensions for loose rib and non-rib sides
BS ISO 12043:2007. Rolling bearings. Single-row cylindrical roller bearings. Chamfer dimensions for loose rib and non-rib sides
BS ISO 12044:1995. Rolling bearings. Single-row angular contact ball bearings. Chamfer dimensions for outer ring non-thrust side
BS ISO 12046:2012. Synchronous belt drives. Automotive belts. Determination of physical properties
BS ISO 12048:1994. Packaging. Complete, filled transport packages. Compression and stacking tests using a compression tester
BS ISO 1206:2001+A1:2013. Rolling bearings. Needle roller bearings, dimension series 48, 49 and 69. Boundary dimensions and tolerances
BS ISO 12078:2006. Anhydrous milk fat. Determination of sterol composition by gas liquid chromatography (Reference method)
BS ISO 12080-1:2000. Dried skimmed milk. Determination of vitamin A contentColorimetric method
BS ISO 12080-1:2009. Dried skimmed milk. Determination of vitamin A contentColorimetric method
BS ISO 12080-2:2000. Dried skimmed milk. Determination of vitamin A contentMethod using high-performance liquid chromatography
BS ISO 12080-2:2009. Dried skimmed milk. Determination of vitamin A contentMethod using high-performance liquid chromatography
BS ISO 12081:1998. Milk. Determination of calcium content. Titrimetric method
BS ISO 12081:2010. Milk. Determination of calcium content. Titrimetric method
BS ISO 12082:2006. Processed cheese and processed cheese products. Calculation of the content of added citrate emulsifying agents and acidifiers/pH-controlling agents, expressed as citric acid
BS ISO 12090-1:2011. Rolling bearings. Profiled rail guides for linear motion rolling bearingsBoundary dimensions and tolerances for series 1, 2 and 3
BS ISO 12090-2:2011. Rolling bearings. Profiled rail guides for linear motion rolling bearingsBoundary dimensions and tolerances for series 4 and 5
BS ISO 12097-1:2002. Road vehicles. Airbag componentsVocabulary
BS ISO 12097-3:2002. Road vehicles. Airbag componentsTesting of inflator assemblies
BS ISO 12103-1:1997. Road vehicles. Test dust for filter evaluationArizona test dust
BS ISO 12103-2:1997. Road vehicles. Test dust for filter evaluationAluminium oxide test dust
BS ISO 12107:2003. Metallic materials. Fatigue testing. Statistical planning and analysis of data
BS ISO 12108:2002. Metallic materials. Fatigue testing. Fatigue crack growth method
BS ISO 12108:2012. Metallic materials. Fatigue testing. Fatigue crack growth method
BS ISO 12110-1:2013. Metallic materials. Fatigue testing. Variable amplitude fatigue testingGeneral principles, test method and reporting requirements
BS ISO 12110-2:2013. Metallic materials. Fatigue testing. Variable amplitude fatigue testingCycle counting and related data reduction methods
BS ISO 12111:2011. Metallic materials. Fatigue testing. Strain-controlled thermomechanical fatigue testing method
BS ISO 12124:2001. Acoustics. Procedures for the measurement of real-ear acoustical characteristics of hearing aids
BS ISO 12128:1995. Plain bearings. Lubrication holes, grooves and pockets. Dimensions, types, designation and their application to bearing bushes
BS ISO 12128:2001. Plain bearings. Lubrication holes, grooves and pockets. Dimensions, types, designation and their application to bearing bushes
BS ISO 12129-2:1995. Plain bearingsTolerances on form and position and surface roughness for shafts, flanges and thrust collars
BS ISO 12130-2:2013. Plain bearings. Hydrodynamic plain tilting pad thrust bearings under steady-state conditionsFunctions for calculation of tilting pad thrust bearings
BS ISO 12132:1999. Plain bearings. Quality assurance of thin-walled half bearings. Design FMEA
BS ISO 12136:2011. Reaction to fire tests. Measurement of material properties using a fire propagation apparatus
BS ISO 12140:1998. Agricultural machinery. Agricultural trailers and trailed equipment. Drawbar jacks
BS ISO 12140:2013. Agricultural machinery. Agricultural trailers and trailed equipment. Drawbar jacks
BS ISO 12141:2002. Stationary source emissions. Determination of mass concentration of particulate matter (dust) at low concentrations. Manual gravimetric method
BS ISO 12142:2001. Electronic imaging. Media error monitoring and reporting techniques for verification of stored data on optical digital data disks
BS ISO 12151-1:1999. Connections for hydraulic fluid power and general use. Hose fittingsHose fittings with ISO 8434-3 O-ring face-seal ends
BS ISO 12151-1:2010. Connections for hydraulic fluid power and general use. Hose fittingsHose fittings with ISO 8434-3 O-ring face seal ends
BS ISO 12151-2:2003. Connections for hydraulic fluid power and general use. Hose fittingsHose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings
BS ISO 12151-3:1999. Connections for hydraulic fluid power and general use. Hose fittingsHose fittings with ISO 6162 flange ends
BS ISO 12151-3:2010. Connections for hydraulic fluid power and general use. Hose fittingsHose fittings with ISO 6162-1 or ISO 6162-2 flange ends
BS ISO 12151-4:2007. Connections for hydraulic fluid power and general use. Hose fittingsHose fittings with ISO 6149 metric stud ends
BS ISO 12151-5:2007. Connections for hydraulic fluid power and general use. Hose fittingsHose fittings with ISO 8434-2 37° flared ends
BS ISO 12151-6:2009. Connections for hydraulic fluid power and general use. Hose fittingsHose fittings with ISO 8434-6 60° cone ends
BS ISO 12152:2012, BS 2000-604:2012. Lubricants, industrial oils and related products. Determination of the foaming and air release properties of industrial gear oils using a spur gear test rig. Flender foam test procedure
BS ISO 12156-1:1997. Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR)Test method
BS ISO 12156-2:1998. Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR)Limit
BS ISO 12156-2:2007. Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR)Limit
BS ISO 12161:2006. Road vehicles. Endurance braking systems of motor vehicles and towed vehicles. Test procedures
BS ISO 12164-1:2001. Hollow taper interface with flange contact surfaceShanks. Dimensions
BS ISO 12164-2:2001. Hollow taper interface with flange contact surfaceReceivers. Dimensions
BS ISO 12164-3:2008. Hollow taper interface with flange contact surfaceDimensions of shanks for stationary tools
BS ISO 12164-4:2008. Hollow taper interface with flange contact surfaceDimensions of receivers for stationary tools
BS ISO 12165:2000. Tools for moulding. Components of compression and injection moulds and diecasting dies. Terms and symbols
BS ISO 1217:1996. Displacement compressors. Acceptance tests
BS ISO 1217:2009. Displacement compressors. Acceptance tests
BS ISO 12171:2002. Space data and information transfer systems. Telecommand. Channel service
BS ISO 12172:2003. Space data and information transfer systems. Telecommand. Data routing service
BS ISO 12173:2003. Space data and information transfer systems. Telecommand. Command operation procedures
BS ISO 12174:2003. Space data and information transfer systems. Telecommand. Architectural specification for the data management service
BS ISO 12176-1:2012. Plastics pipes and fittings. Equipment for fusion jointing polyethylene systemsButt fusion
BS ISO 12176-2:2008. Plastics pipes and fittings. Equipment for fusion jointing polyethylene systemsElectrofusion
BS ISO 12176-3:2011. Plastics pipes and fittings. Equipment for fusion jointing polyethylene systemsOperator's badge
BS ISO 12188-1:2010. Tractors and machinery for agriculture and forestry. Test procedures for positioning and guidance systems in agricultureDynamic testing of satellite-based positioning devices
BS ISO 12188-2:2012. Tractors and machinery for agriculture and forestry. Test procedures for positioning and guidance systems in agricultureTesting of satellite-based auto-guidance systems during straight and level travel
BS ISO 12189:2008. Implants for surgery. Mechanical testing of implantable spinal devices. Fatigue test method for spinal implant assemblies using an anterior support
BS ISO 1219-1:2012. Fluid power systems and components. Graphical symbols and circuit diagramsGraphical symbols for conventional use and data-processing applications
BS ISO 1219-2:1995. Fluid power systems and components. Graphic symbols and circuit diagramsCircuit diagrams