BS EN 546-1:1997. Specification for aluminium and aluminium alloys. FoilTechnical conditions for inspection and delivery
BS EN 546-1:2006. Aluminium and aluminium alloys. FoilTechnical conditions for inspection and delivery
BS EN 546-2:1997. Specification for aluminium and aluminium alloys. FoilMechanical properties
BS EN 546-2:2006. Aluminium and aluminium alloys. FoilMechanical properties
BS EN 546-3:1997. Specification for aluminium and aluminium alloys. FoilTolerances on dimensions
BS EN 546-3:2006. Aluminium and aluminium alloys. FoilTolerances on dimensions
BS EN 546-4:1997. Specification for aluminium and aluminium alloys. FoilSpecial property requirements
BS EN 546-4:2006. Aluminium and aluminium alloys. FoilSpecial property requirements
BS EN 54-7:2001. Fire detection and fire alarm systemsSmoke detectors. Point detectors using scattered light, transmitted light or ionization
BS EN 547-1:1996+A1:2008. Safety of machinery. Human body measurementsPrinciples for determining the dimensions required for openings for whole body access into machinery
BS EN 547-2:1996+A1:2008. Safety of machinery. Human body measurementsPrinciples for determining the dimensions required for access openings
BS EN 547-3:1996+A1:2008. Safety of machinery. Human body measurementsAnthropometric data
BS EN 548:1997. Resilient floor coverings. Specification for plain and decorative linoleum
BS EN 548:2004. Resilient floor coverings. Specification for plain and decorative linoleum
BS EN 548:2011. Resilient floor coverings. Specification for plain and decorative linoleum
BS EN 549:1995. Specification for rubber materials for seals and diaphragms for gas appliances and gas equipment
BS EN 550:1994. Sterilization of medical devices. Validation and routine control of ethylene oxide sterilization
BS EN 55011:1991. Specification for limits and methods of measurement of radio disturbance characteristics of industrial, scientific and medical (ISM) radio-frequency equipment
BS EN 55011:1998. Limits and methods of measurement of radio disturbance characteristics of industrial, scientific and medical (ISM) radio-frequency equipment
BS EN 55011:2007. Industrial, scientific and medical (ISM) radio-frequency Equipment. Electromagnetic disturbance characteristics. Limits and methods of measurement
BS EN 55011:2009+A1:2010. Industrial, scientific and medical equipment. Radio-frequency disturbance characteristics. Limits and methods of measurement
BS EN 55012:2002. Vehicles, boats and internal combustion engine driven devices. Radio disturbance characteristics. Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices
BS EN 55012:2007+A1:2009. Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of off-board receivers
BS EN 55013:1997. Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment
BS EN 55013:2001+A2:2006. Sound and television broadcast receivers and associated equipment. Radio disturbance characteristics. Limits and methods of measurement
BS EN 55013:2013. Sound and television broadcast receivers and associated equipment. Radio disturbance characteristics. Limits and methods of measurement
BS EN 55014-1:1997. Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatusEmission. Product family standard
BS EN 55014-1:2001. Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatusEmission
BS EN 55014-1:2006+A2:2011. Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatusEmission
BS EN 55014-2:1997+A2:2008, CISPR 14-2:1997. Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatusImmunity. Product family standard
BS EN 55015:1993. Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
BS EN 55015:1996, CISPR 15:1996. Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
BS EN 55015:2001. Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
BS EN 55015:2006+A2:2009. Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
BS EN 55015:2013. Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
BS EN 55016-1-1:2004. Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatus
BS EN 55016-1-1:2007+A2:2008. Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatus. Measuring apparatus
BS EN 55016-1-1:2010+A1:2010. Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatus. Measuring apparatus
BS EN 55016-1-2:2004+A2:2006. Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatus. Ancillary equipment. Conducted disturbances
BS EN 55016-1-3:2004. Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatus. Ancillary equipment. Disturbance power
BS EN 55016-1-3:2006. Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatus. Ancillary equipment
BS EN 55016-1-4:2004. Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatus. Ancillary equipment. Radiated disturbances
BS EN 55016-1-4:2007+A2:2009. Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatus. Ancillary equipment. Radiated disturbances
BS EN 55016-1-4:2010+A1:2012. Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatus. Antennas and test sites for radiated disturbance measurements
BS EN 55016-1-5:2004+A1:2012. Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatus. Specifications and validation procedures for CALTS and RFTS from 30 MHz to 1 000 MHz
BS EN 55016-2-1:2004. Specification for radio disturbance and immunity measuring apparatus and methodsMethods of measurement of disturbances and immunity. Conducted disturbance measurements
BS EN 55016-2-1:2009+A2:2013. Specification for radio disturbance and immunity measuring apparatus and methodsMethods of measurement of disturbances and immunity. Conducted disturbance measurements
BS EN 55016-2-2:2011. Specification for radio disturbance and immunity measuring apparatus and methodsMethods of measurement of disturbances and immunity. Measurement of disturbance power
BS EN 55016-2-3:2004. Specification for radio disturbance and immunity measuring apparatus and methodsMethods of measurment of disturbances and immunity. Radiated disturbance measurements
BS EN 55016-2-3:2006. Specification for radio disturbance and immunity measuring apparatus and methodsMethods of measurement of disturbances and immunity
BS EN 55016-2-3:2010. Specification for radio disturbance and immunity measuring apparatus and methodsMethods of measurement of disturbances and immunity. Radiated disturbance measurements
BS EN 55016-2-3:2010+A1:2010. Specification for radio disturbance and immunity measuring apparatus and methodsMethods of measurement of disturbances and immunity. Radiated disturbance measurements
BS EN 55016-2-4:2004. Specification for radio disturbance and immunity measuring apparatus and methodsMethods of measurement of disturbances and immunity. Immunity measurements
BS EN 55016-4-2:2004. Specification for radio disturbance and immunity measuring apparatus and methodsUncertainties, statistics and limit modelling. Uncertainty in EMC measurements
BS EN 55016-4-2:2011. Specification for radio disturbance and immunity measuring apparatus and methodsUncertainties, statistics and limit modelling. Measurement instrumentation uncertainty
BS EN 55017:2011. Methods of measurement of the suppression characteristics of passive EMC filtering devices
BS EN 55020:1995. Electromagnetic immunity of broadcast receivers and associated equipment
BS EN 55020:2002. Sound and television broadcast receivers and associated equipment.Immunity characteristics. Limits and methods of measurement
BS EN 55020:2007+A11:2011. Sound and television broadcast receivers and associated equipment. Immunity characteristics. Limits and methods of measurement
BS EN 55022:1995, CISPR 22:1993. Limits and methods of measurement of radio disturbance characteristics of information technology equipment
BS EN 55022:1998, CISPR 22:1997. Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement
BS EN 55022:2006+A2:2010. Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement
BS EN 55022:2010. Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement
BS EN 55024:1998+A2:2003, CISPR 24:1997. Information technology equipment. Immunity characteristics. Limits and methods of measurement
BS EN 55024:2010. Information technology equipment. Immunity characteristics. Limits and methods of measurement
BS EN 55025:2003, CISPR 25:2002. Radio disturbance characteristics for the protection of receivers used on board vehicles, boats and on devices. Limits and methods of measurement
BS EN 55025:2008. Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of on-board receivers
BS EN 55032:2012. Electromagnetic compatibility of multimedia equipment. Emission requirements
BS EN 55103-1:1997. Electromagnetic compatibility. Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional useEmission
BS EN 55103-1:2009+A1:2012. Electromagnetic compatibility. Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional useEmissions
BS EN 55103-2:1997. Electromagnetic compatibility. Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional useImmunity
BS EN 55103-2:2009. Electromagnetic compatibility. Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional useImmunity
BS EN 55104:1995. Electromagnetic compatibility. Immunity requirements for household appliances, tools and similar apparatus. Product family standard
BS EN 552:1994. Sterilization of medical devices. Validation and routine control of sterilization by irradiation
BS EN 554:1994. Sterilization of medical devices. Validation and routine control of sterilization by moist heat
BS EN 556:1995. Sterilization of medical devices. Requirements for terminally-sterilized devices to be labelled 'Sterile'
BS EN 556-1:2001. Sterilization of medical devices. Requirements for medical devices to be designated "STERILE"Requirements for terminally sterilized medical devices
BS EN 556-2:2003. Sterilization of medical devices. Requirements for medical devices to be designated "STERILE"Requirements for aseptically processed medical devices
BS EN 558:2008+A1:2011. Industrial valves. Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems. PN and Class designated valves
BS EN 558-1:1996. Industrial valves. Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systemsPN-designated valves
BS EN 558-2:1996. Industrial valves. Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systemsClass-designated valves
BS EN 559:1994. Gas welding equipment. Rubber hoses for welding, cutting and allied processes
BS EN 559:2003. Gas welding equipment. Rubber hoses for welding, cutting and allied processes
BS EN 560:1995. Gas welding equipment. Hose connections for welding, cutting and allied processes
BS EN 560:2005. Gas welding equipment. Hose connections for equipment for welding, cutting and allied processes
BS EN 561:1995. Gas welding equipment. Quick-action couplings with shut-off valves for welding, cutting and allied processes
BS EN 561:2002. Gas welding equipment. Quick-action coupling with shut-off valves for welding, cutting and allied processes
BS EN 562:1995. Gas welding equipment. Pressure gauges used in welding, cutting and allied processes
BS EN 562:2003. Gas welding equipment. Pressure gauges used in welding, cutting and allied processes
BS EN 563:1994. Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to establish temperature limit values for hot surfaces
BS EN 564:1993. Mountaineering equipment. Accessory cord. Safety requirements and test method
BS EN 564:1997. Mountaineering equipment. Accessory cord. Safety requirements and test methods
BS EN 564:2006. Mountaineering equipment. Accessory cord. Safety requirements and test methods
BS EN 565:1993. Mountaineering equipment. Tape. Safety requirements and test method
BS EN 565:1997. Mountaineering equipment. Tape. Safety requirements and test methods
BS EN 565:2006. Mountaineering equipment. Tape. Safety requirements and test methods
BS EN 566:1993. Mountaineering equipment. Slings. Safety requirements and test method
BS EN 566:1997. Mountaineering equipment. Slings. Safety requirements and test methods
BS EN 566:2006. Mountaineering equipment. Slings. Safety requirements and test methods
BS EN 567:1993. Mountaineering equipment. Rope clamp. Safety requirements and test method
BS EN 567:1997. Mountaineering equipment. Rope clamps. Safety requirements and test methods
BS EN 567:2013. Mountaineering equipment. Rope clamps. Safety requirements and test methods
BS EN 568:1993. Mountaineering equipment. Ice anchors. Safety requirements and test method
BS EN 568:1997. Mountaineering equipment. Ice anchors. Safety requirements and test methods
BS EN 568:2007. Mountaineering equipment. Ice anchors. Safety requirements and test methods
BS EN 569:1993. Mountaineering equipment. Pitons. Safety requirements and test method
BS EN 569:1997. Mountaineering equipment. Pitons. Safety requirements and test methods
BS EN 569:2007. Mountaineering equipment. Pitons. Safety requirements and test methods
BS EN 570:1995. Aluminium and aluminium alloys. Impact extrusion slugs obtained from wrought products. Specifications
BS EN 570:2007. Aluminium and aluminium alloys. Impact extrusion slugs obtained from wrought products. Specification
BS EN 571-1:1997. Non-destructive testing. Penetrant testingGeneral principles
BS EN 572-1:1995. Glass in building. Basic soda lime silicate glass productsDefinitions and general physical and mechanical properties
BS EN 572-1:2004. Glass in building. Basic soda lime silicate glass productsDefinitions and general physical and mechanical properties
BS EN 572-1:2012. Glass in building. Basic soda lime silicate glass productsDefinitions and general physical and mechanical properties
BS EN 572-2:1995. Glass in building. Basic soda lime silicate glass productsFloat glass
BS EN 572-2:2004. Glass in building. Basic soda lime silicate glass productsFloat glass
BS EN 572-2:2012. Glass in building. Basic soda lime silicate glass productsFloat glass
BS EN 572-3:1995. Glass in building. Basic soda lime silicate glass productsPolished wired glass
BS EN 572-3:2004. Glass in building. Basic soda lime silicate glass productsPolished wire glass
BS EN 572-3:2012. Glass in building. Basic soda lime silicate glass productsPolished wired glass
BS EN 572-4:1995. Glass in building. Basic soda lime silicate glass productsDrawn sheet glass
BS EN 572-4:2004. Glass in building. Basic soda lime silicate glass productsDrawn sheet glass
BS EN 572-4:2012. Glass in building. Basic soda lime silicate glass productsDrawn sheet glass
BS EN 572-5:1995. Glass in building. Basic soda lime silicate glass productsPatterned glass
BS EN 572-5:2004. Glass in building. Basic soda lime silicate glass productsPatterned glass
BS EN 572-5:2012. Glass in building. Basic soda lime silicate glass productsPatterned glass
BS EN 572-6:1995. Glass in building. Basic soda lime silicate glass productsWired patterned glass
BS EN 572-6:2004. Glass in building. Basic soda lime silicate glass productsWired patterned glass
BS EN 572-6:2012. Glass in building. Basic soda lime silicate glass productsWired patterned glass
BS EN 572-7:1995. Glass in building. Basic soda lime silicate glass productsWired or unwired channel shaped glass
BS EN 572-7:2004. Glass in building. Basic soda lime silicate glass productsWired or unwired channel shaped glass
BS EN 572-7:2012. Glass in building. Basic soda lime silicate glass productsWired or unwired channel shaped glass
BS EN 572-8:2004. Glass in building. Basic soda lime silicate glass productsSupplied and final cut sizes
BS EN 572-8:2012. Glass in building. Basic soda lime silicate glass productsSupplied and final cut sizes
BS EN 572-9:2004. Glass in building. Basic soda lime silicate glass productsEvaluation of conformity/Product standard
BS EN 573-1:1995. Aluminium and aluminium alloys. Chemical composition and form of wrought productsNumerical designation system
BS EN 573-1:2004. Aluminium and aluminium alloys. Chemical composition and form of wrought productsNumerical designation system
BS EN 573-2:1995. Aluminium and aluminium alloys. Chemical composition and form of wrought productsChemical symbol based designation system
BS EN 573-3:1995. Aluminium and aluminium alloys. Chemical composition and form of wrought productsChemical composition
BS EN 573-3:2003. Aluminium and aluminium alloys. Chemical composition and form of wrought productsChemical composition
BS EN 573-3:2007. Aluminium and aluminium alloys. Chemical composition and form of wrought productsChemical composition and form of products
BS EN 573-3:2009. Aluminium and aluminium alloys. Chemical composition and form of wrought productsChemical composition and form of products
BS EN 573-4:1995. Aluminium and aluminium alloys. Chemical composition and form of wrought productsForms of products
BS EN 573-4:2004. Aluminium and aluminium alloys. Chemical composition and form of wrought productsForms of products
BS EN 573-5:2007. Aluminium and aluminium alloys. Chemical composition and form of wrought productsCodification of standardized wrought products
BS EN 574:1996+A1:2008. Safety of machinery. Two-hand control devices. Functional aspects. Principles for design
BS EN 575:1996. Aluminium and aluminium alloys. Master alloys produced by melting. Specifications
BS EN 576:1996. Aluminium and aluminium alloys. Unalloyed aluminium ingots for remelting. Specifications
BS EN 576:2003. Aluminium and aluminium alloys. Unalloyed aluminium ingots for remelting. Specifications
BS EN 577:1996. Aluminium and aluminium alloys. Liquid metal. Specifications
BS EN 578:1994, BS 2782-11:Method 1104A:1994. Plastics piping systems. Plastics pipes and fittings. Determination of the opacity
BS EN 579:1994, BS 2782-11:Method 1106E:1994. Plastics piping systems. Crosslinked polyethylene (PE-X) pipes. Determination of degree of crosslinking by solvent extraction
BS EN 58:2004, BS 2000-474:2004. Bitumen and bituminous binders. Sampling bituminous binders
BS EN 58:2012, BS 2000-474:2012. Bitumen and bituminous binders. Sampling bituminous binders
BS EN 580:1994, BS 2782-11:Method 1105D:1994. Plastics piping systems. Unplasticized poly (vinyl chloride) (PVC-U) pipes. Test method for the resistance to dichloromethane at a specified temperature (DCMT)
BS EN 580:2003. Plastics piping Systems. Unplasticized poly(vinyl chloride) (PVC-U) pipes. Test methods for the resistance to dichloromethane at a specified temperature (DCMT)
BS EN 581-1:1997. Outdoor furniture. Seating and tables for camping, domestic and contract use.General safety requirements
BS EN 581-1:2006. Outdoor furniture. Seating and tables for camping, domestic and contract useGeneral safety requirements
BS EN 581-2:2009. Outdoor furniture. Seating and tables for camping, domestic and contract useMechanical safety requirements and test methods for seating
BS EN 581-3:1999. Outdoor furniture. Seating and tables for camping, domestic and contract use.Mechanical safety requirements and test methods for tables
BS EN 581-3:2007. Outdoor furniture. Seating and tables for camping, domestic and contract useMechanical safety requirements and test methods for tables
BS EN 582:1994. Thermal spraying. Determination of tensile adhesive strength
BS EN 583-1:1999. Non-destructive testing. Ultrasonic examinationGeneral principles
BS EN 583-2:2001. Non-destructive testing. Ultrasonic examinationSensitivity and range setting
BS EN 583-3:1997. Non-destructive testing. Ultrasonic examinationTransmission technique
BS EN 583-4:2002. Non-destructive testing. Ultrasonic examinationExamination for discontinuities perpendicular to the surface
BS EN 583-5:2001. Non-destructive testing. Ultrasonic examinationCharacterization and sizing of discontinuities
BS EN 583-6:2008. Non-destructive testing. Ultrasonic examinationTime-of-flight diffraction technique as a method for detection and sizing of discontinuities
BS EN 584-1:1995. Non-destructive testing. Industrial radiographic filmClassification of film systems for industrial radiography
BS EN 584-1:2006. Non-destructive testing. Industrial radiographic filmClassification of film systems for industrial radiography
BS EN 584-2:1997. Non-destructive testing. Industrial radiographic filmControl of film processing by means of reference values
BS EN 585:1995. Gas welding equipment. Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 200 bar
BS EN 586-1:1998. Aluminium and aluminium alloys. ForgingsTechnical conditions for inspection and delivery
BS EN 586-2:1994. Aluminium and aluminium alloys. ForgingsMechanical properties and additional property requirements
BS EN 586-3:2001. Aluminium and aluminium alloys. ForgingsTolerances on dimensions and form
BS EN 588-1:1997. Fibre-cement pipes for sewers and drainsPipes, joints and fittings for gravity systems
BS EN 588-2:2001. Fibre-cement pipes for sewers and drainsManholes and inspection chambers
BS EN 589:1993. Specification for automotive liquefied petroleum gas
BS EN 589:1999. Automotive fuels. LPG. Requirements and test methods
BS EN 589:2000. Automotive fuels. LPG. Requirements and test methods
BS EN 589:2004. Automotive fuels. LPG. Requirements and test methods
BS EN 589:2008+A1:2012. Automotive fuels. LPG. Requirements and test methods
BS EN 590:1993. Specification for automotive diesel fuel
BS EN 590:1995. Specification for automotive diesel fuel
BS EN 590:1997. Specification for automotive diesel fuel
BS EN 590:1999. Automotive fuels. Diesel. Requirements and test methods
BS EN 590:2000. Automotive fuels. Diesel. Requirements and test methods
BS EN 590:2004. Automotive fuels. Diesel. Requirements and test methods
BS EN 590:2009+A1:2010. Automotive fuels. Diesel. Requirements and test methods
BS EN 590:2013. Automotive fuels. Diesel. Requirements and test methods
BS EN 591:1995. Specification for user manuals for in vitro diagnostic instruments for professional use
BS EN 591:2001. Instructions for use for in vitro diagnostic instruments for professional use
BS EN 592:1995. Specification for user manuals for in vitro diagnostic instruments for home use
BS EN 592:2002. Instructions for use for in vitro diagnostic instruments for self-testing
BS EN 593:1998. Industrial valves. Metallic butterfly valves
BS EN 593:2004. Industrial valves. Metallic butterfly valves
BS EN 593:2009+A1:2011. Industrial valves. Metallic butterfly valves
BS EN 594:1996. Timber structures. Test methods. Racking strength and stiffness of timber frame wall panels
BS EN 594:2011. Timber structures. Test methods. Racking strength and stiffness of timber frame wall panels
BS EN 595:1995. Timber structures. Test methods. Test of trusses for the determination of strength and deformation behaviour
BS EN 596:1995. Timber structures. Test methods. Soft body impact test of timber framed walls
BS EN 597-1:1995. Furniture. Assessment of the ignitability of mattresses and upholstered bed basesIgnition source: smouldering cigarette
BS EN 597-2:1995. Furniture. Assessment of the ignitability of mattresses and upholstered bed basesIgnition source: match flame equivalent
BS EN 598:1995. Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Requirements and test methods
BS EN 598:2007+A1:2009. Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Requirements and test methods
BS EN 599-1:1997. Durability of wood and wood-based products. Performance of preservatives as determined by biological testsSpecification according to hazard class
BS EN 599-1:2009. Durability of wood and wood-based products. Efficacy of preventive wood preservatives as determined by biological testsSpecification according to use class
BS EN 599-2:1997. Durability of wood and wood-based products. Performance of preservatives as determined by biological testsClassification and labelling
BS EN 600:1996, BS 3704:1996. Natural rubber latex male condoms
BS EN 60027-1:2006+A2:2007. Letter symbols to be used in electrical technologyGeneral
BS EN 60027-2:2007. Letter symbols to be used in electrical technologyTelecommunications and electronics
BS EN 60027-3:2007. Letter symbols to be used in electrical technologyLogarithmic and related quantities, and their units
BS EN 60027-4:2007. Letter symbols to be used in electric technologyRotating electric machines
BS EN 60027-6:2007. Letter symbols to be used in electrical technologyControl technology
BS EN 60027-7:2010. Letter symbols to be used in electrical technologyPower generation, transmission and distribution
BS EN 60034-1:1995. Rotating electrical machinesRating and performance
BS EN 60034-1:1998. Rotating electrical machinesRating and performance
BS EN 60034-1:2004. Rotating electrical machinesRating and performance
BS EN 60034-1:2010. Rotating electrical machinesRating and performance
BS EN 60034-11:2004. Rotating electrical machinesThermal protection
BS EN 60034-12:1996. Rotating electrical machinesStarting performance of single-speed three-phase cage induction motors for voltages up to and including 690 V, 50 Hz
BS EN 60034-12:2002. Rotating electrical machines Starting performance of single-speed three-phase cage induction motors
BS EN 60034-14:1998. Rotating electrical machinesMechanical vibration of certain machines with shaft heights 56 mm and higher. Measurement, evaluation and limits of vibration
BS EN 60034-14:2004. Rotating electrical machinesMechanical vibration of certain machines with shaft heights 56 mm and higher. Measurement, evaluation and limits of vibration severity
BS EN 60034-15:1996, IEC 60034-15:1995. Rotating electrical machinesImpulse voltage withstand levels of rotating a.c. machines with form-wound stator coils
BS EN 60034-15:2009. Rotating electrical machinesImpulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
BS EN 60034-16-1:1996, IEC 60034-16-1:1991. Rotating electrical machines. Excitation systems for synchronous machinesDefinitions
BS EN 60034-16-1:2011. Rotating electrical machinesExcitation systems for synchronous machines. Definitions
BS EN 60034-18-1:1994, IEC 60034-18-1:1992. Rotating electrical machines. Functional evaluation of insulation systemsGeneral guidelines
BS EN 60034-18-1:2010. Rotating electrical machinesFunctional evaluation of insulation systems. General guidelines
BS EN 60034-18-21:1994, IEC 60034-18-21:1994. Rotating electrical machines. Functional evaluation of insulation systemsTest procedures for wire-wound windings. Thermal evaluation and classification.
BS EN 60034-18-21:2013. Rotating electrical machinesFunctional evaluation of insulation systems. Test procedures for wire-wound windings. Thermal evaluation and classification
BS EN 60034-18-22:2001, IEC 60034-18-22:2000. Rotating electrical machines. Functional evaluation of insulation systemsTest procedures for wire-wound windings. Classification of changes and insulation component substitutions
BS EN 60034-18-31:1994, IEC 60034-18-31:1994. Rotating electrical machines. Functional evaluation of insulation systemsTest procedures for form-wound windings. Thermal evaluation and classification of insulation systems used in machines up to and including 50 MVA and 15 KV
BS EN 60034-18-31:2012. Rotating electrical machinesFunctional evaluation of insulation systems. Test procedures for form-wound windings. Thermal evaluation and classification of insulation systems used in rotating machines
BS EN 60034-18-32:2010. Rotating electrical machinesFunctional evaluation of insulation systems. Test procedures for form-wound windings. Evaluation by electrical endurance
BS EN 60034-18-34:2012. Rotating electrical machinesFunctional evaluation of insulation systems. Test procedures for form-wound windings. Evaluation of thermomechanical endurance of insulation systems
BS EN 60034-2:1999. Rotating electrical machinesMethods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles)
BS EN 60034-2-1:2007. Rotating electrical machinesStandard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
BS EN 60034-22:1998. Rotating electrical machinesA.C. generators for reciprocating internal combustion (RIC) engine driven generating sets
BS EN 60034-22:2009. Rotating electrical machinesAC generators for reciprocating internal combustion (RIC) engine driven generating sets
BS EN 60034-2-2:2010. Rotating electrical machinesSpecific methods for determining separate losses of large machines from tests. Supplement to IEC 60034-2-1
BS EN 60034-26:2006. Rotating electrical machines Effects of unbalanced voltages on the performance of three-phase induction motors
BS EN 60034-28:2007. Rotating electrical machinesTest methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors
BS EN 60034-28:2013. Rotating electrical machinesTest methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors
BS EN 60034-29:2008. Rotating electrical machinesEquivalent loading and superposition techniques. Indirect testing to determine temperature rise
BS EN 60034-3:1996. Rotating electrical machinesSpecific requirements for turbine-type synchronous machines
BS EN 60034-3:2005. Rotating electrical machinesSpecific requirements for cylindrical rotor synchronous machines
BS EN 60034-3:2008. Rotating electrical machinesSpecific requirements for synchronous generators driven by steam turbines or combustion gas turbines
BS EN 60034-30:2009. Rotating electrical machinesEfficiency classes of single-speed, three-phase, cage-induction motors (IE-code)
BS EN 60034-4:1995. Rotating electrical machinesMethods for determining synchronous machine quantities from tests
BS EN 60034-4:2008. Rotating electrical machinesMethods for determining synchronous machine quantities from tests
BS EN 60034-5:2001, IEC 60034-5:2000. Rotating electrical machinesDegrees of protection provided by the integral design of rotating electrical machines (IP code). Classification
BS EN 60034-6:1994, IEC 60034-6:1991. Rotating electrical machines.Methods of cooling (IC Code)
BS EN 60034-7:1993, IEC 60034-7:1992. Rotating electrical machinesClassification of types of constructions and mounting arrangements (IM Code)
BS EN 60034-8:2002. Rotating electrical machinesTerminal markings and direction of rotation
BS EN 60034-8:2007. Rotating electrical machinesTerminal markings and direction of rotation
BS EN 60034-9:1994. Rotating electrical machinesNoise limits
BS EN 60034-9:1998, IEC 60034-9:1997. Rotating electrical machinesNoise limits
BS EN 60034-9:2005. Rotating electrical machinesNoise limits
BS EN 60038:2011. CENELEC standard voltages
BS EN 60041:1995. Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
BS EN 60044-1:1999, IEC 60044-1:1996. Instrument transformersCurrent transformers
BS EN 60044-2:1999, IEC 60044-2:1997. Instrument transformersInductive voltage transformers
BS EN 60044-3:2003. Instrument transformersCombined transformers
BS EN 60044-5:2004. Instrument transformersCapacitor voltage transformers
BS EN 60044-6:1999, IEC 60044-6:1992. Instrument transformersRequirements for protective current transformers for transient performance
BS EN 60044-7:2000, IEC 60044-7:1999. Instrument transformersElectronic voltage transformers
BS EN 60044-8:2002. Instrument transformersElectronic current transformers
BS EN 60045-1:1993, IEC 60045-1:1991. Guide to steam turbine procurementGuide to steam turbine procurement
BS EN 60051-1:1999, IEC 60051-1:1997. Direct acting indicating analogue electrical measuring instruments and their accessoriesDefinitions and general requirements common to all parts
BS EN 60052:2002. Voltage measurement by means of standard air gaps
BS EN 60059:1999+A1:2009, IEC 60059:1999. IEC standard current ratings
BS EN 60060-1:2010. High-voltage test techniquesGeneral definitions and test requirements
BS EN 60060-2:1995. High-voltage test techniquesMeasuring systems
BS EN 60060-2:2011. High-voltage test techniquesMeasuring systems
BS EN 60060-3:2006. High voltage test techniquesDefinitions and requirements for on-site tests
BS EN 60061-1:1993. Specification for lamp caps and holders together with gauges for the control of interchangeability and safetyLamp caps
BS EN 60061-1:1993+A48:2012. Lamp caps and holders together with gauges for the control of interchangeability and safetyLamp caps
BS EN 60061-2:1993. Specification for lamp caps and holders together with gauges for the control of interchangeability and safetyLampholders
BS EN 60061-2:1993+A45:2012. Lamp caps and holders together with gauges for the control of interchangeability and safetyLampholders
BS EN 60061-2:1997. BSEN60061-2:1997 Lamp caps and holders together with gauges for the control of interchangeability and safetypt4:lampholders
BS EN 60061-3:1993. Specification for lamp caps and holders together with gauges for the control of interchangeability and safetyGauges
BS EN 60061-3:1993+A45:2012. Lamp caps and holders together with gauges for the control of interchangeability and safetyGauges
BS EN 60061-4:1992+A13:2011. Lamp caps and holders together with gauges for the control of interchangeability and safetyGuidelines and general information
BS EN 60062:1994. Marking codes for resistors and capacitors
BS EN 60062:2005. Marking codes for resistors and capacitors
BS EN 60064:1995+A5:2009. Tungsten filament lamps for domestic and similar general lighting purposes. Performance requirements
BS EN 60065:1994, BS 415:1994. Safety requirements for mains operated electronic and related apparatus for household and similar general use
BS EN 60065:1998, BS 415:1998. Audio, video and similar electronic apparatus. Safety requirements
BS EN 60065:2002+A12:2011. Audio, video and similar electronic apparatus. Safety requirements
BS EN 60068-1:1995, IEC 60068-1:1988. Environmental testingGeneral and guidance
BS EN 60068-2-1:1993, IEC 60068-2-1:1993. Environmental testing. Test methodsTests A. Cold
BS EN 60068-2-1:2007. Environmental testingTests. Test A. Cold
BS EN 60068-2-10:2005. Environmental testingTests. Test J and guidance: Mould growth
BS EN 60068-2-11:1999, IEC 60068-2-11:1981. Environmental testing. Test methodsTests. Test KA. Salt mist
BS EN 60068-2-13:1999, IEC 60068-2-13:1983. Environmental testing. Test methodsTests. Test M. Low air pressure
BS EN 60068-2-14:2000, IEC 60068-2-14:1984. Environmental testing. Test methodsTest N. Change of temperature
BS EN 60068-2-14:2009. Environmental testingTests. Test N. Change of temperature
BS EN 60068-2-17:1995, IEC 60068-2-17:1994. Environmental testing. Test methodsTest Q. Sealing
BS EN 60068-2-18:2001, IEC 60068-2-18:2000. Environmental testing. Test methodsTests R and guidance. Water
BS EN 60068-2-2:1993, IEC 60068-2-2:1974. Environmental testing. Test methodsTests B. Dry heat
BS EN 60068-2-2:2007. Environmental testingTests. Test B. Dry heat
BS EN 60068-2-20:2008. Environmental testingTests. Test T. Test methods for solderability and resistance to soldering heat of devices with leads
BS EN 60068-2-21:1997, IEC 60068-2-21:1983. Environmental testing. Test methodsTest U. Robustness of terminations and integral mounting devices
BS EN 60068-2-21:1999, IEC 60068-2-21:1999. Environmental testing. Test methodsTest U. Robustness of terminations and integral mounting devices
BS EN 60068-2-21:2006. Environmental testingTests. Test U: Robustness of terminations and integral mounting devices
BS EN 60068-2-27:1993, IEC 60068-2-27:1987. Environmental testing. Test methodsEnvironmental testing procedures. Tests. Test Ea and guidance. Shock
BS EN 60068-2-27:2009. Environmental testingTests. Test Ea and guidance. Shock
BS EN 60068-2-29:1993, IEC 60068-2-29:1987. Environmental testing. Test methodsEnvironmental testing procedures. Tests. Test Eb and guidance. Bump
BS EN 60068-2-30:1999, IEC 60068-2-30:1980. Environmental testing. Test methodsTest Db and guidance: damp heat, cyclic (12 + 12 hour cycle)
BS EN 60068-2-30:2005. Environmental testingTests. Test Db and guidance: Damp heat, cyclic (12 h + 12 h cycle)
BS EN 60068-2-31:1993, IEC 60068-2-31:1969. Environmental testing. Test methodsTest Ec. Drop and topple, primarily for equipment-type specimens
BS EN 60068-2-31:2008. Environmental testingTests. Test Ec. Rough handling shocks, primarily for equipment-type specimens
BS EN 60068-2-32:1993. Environmental testing. Test methodsTest Ed. Free fall
BS EN 60068-2-33:2000, IEC 60068-2-33:1971. Environmental testing. Test methodsGuidance on change of temperature tests
BS EN 60068-2-38:1999, IEC 60068-2-38:1974. Environmental testing. Test methodsTests. Test Z/AD:composite temperature/humidity cyclic test
BS EN 60068-2-38:2009. Environmental testingTests. Test Z/AD. Composite temperature/humidity cyclic test
BS EN 60068-2-39:1999, IEC 60068-2-39:1999. Environmental testing. Test methodsTests. Test Z/AMD. Combined sequential cold, low air pressure and damp heat test
BS EN 60068-2-40:2000, IEC 60068-2-40:1976. Environmental testing. Test methodsTest Z/AM. Combined cold/low air pressure tests
BS EN 60068-2-41:2000, IEC 60068-2-41:1976. Environmental testing. Test methodsTests. Test Z/BM: Combined dry heat/low air pressure tests
BS EN 60068-2-42:2003. Environmental testing. Test methodsTest Kc. Sulphur dioxide test for contacts and connections
BS EN 60068-2-43:2003. Environmental testing. Test methodsTest Kd. Hydrogen sulphide test for contacts and connections
BS EN 60068-2-44:1995, IEC 60068-2-44:1995. Environmental testing. Test methodsTests. Guidance on Test T. Soldering
BS EN 60068-2-45:1993, IEC 60068-2-45:1980. Environmental testing. Test methodsEnvironmental testing. Tests. Test XA and guidance. Immersion in cleaning solvents
BS EN 60068-2-47:1993, IEC 60068-2-47:1982. Environmental testing. Test methodsMounting of components, equipment and other articles for dynamic tests including shock (Ea), bump (Eb), vibration (Fc and Fd) and steady-state acceleration (Ga) and guidance
BS EN 60068-2-47:2000, IEC 60068-2-47:1999. Environmental testing. Test methodsMounting of components, equipment and other articles for vibration, impact and similar dynamic tests
BS EN 60068-2-47:2005. Environmental testingTests. Mounting of specimens for vibration, impact and similar dynamic tests
BS EN 60068-2-48:2000, IEC 60068-2-48:1982. Environmental testing. Test methodsGuidance on the application of the tests of IEC 60068 to simulate the effects of storage
BS EN 60068-2-5:2000, IEC 60068-2-5:1975. Environmental testing. Test methodsTest Sa. Simulated solar radiation at ground level
BS EN 60068-2-5:2011. Environmental testingTests. Test Sa. Simulated solar radiation at ground level and guidance for solar radiation testing
BS EN 60068-2-50:2000, IEC 60068-2-50:1983. Environmental testing. Test methodsTests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat dissipating specimens
BS EN 60068-2-51:2000, IEC 60068-2-51:1983. Environmental testing. Test methodsTests. Tests Z/BFc. Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
BS EN 60068-2-52:1996, IEC 60068-2-52:1996. Environmental testing. Test methodsTests. Test Kb. Salt mist cyclic (sodium chloride solution)
BS EN 60068-2-53:2010. Environmental testingTests and guidance. Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
BS EN 60068-2-54:2006. Environmental testingTests
BS EN 60068-2-55:1993, IEC 60068-2-55:1987. Environmental testing. TestsTest Ee and guidance. Bounce
BS EN 60068-2-55:2013. Environmental testingTests. Test Ee and guidance. Loose cargo testing including bounce
BS EN 60068-2-57:1993, IEC 60068-2-57:1989. Environmental testing. Test methodsTest Ff. Vibration - time-history method
BS EN 60068-2-57:2000, IEC 60068-2-57:1999. Environmental testing. Test methodsTest Ff. Vibration. Time-history method
BS EN 60068-2-57:2013. Environmental testingTests. Test Ff: Vibration. Time-history and sine-beat method
BS EN 60068-2-58:1999, IEC 60068-2-58:1999. Environmental testing. Test methodsTest Td. Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
BS EN 60068-2-58:2004. Environmental testingTests. Test Td. Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
BS EN 60068-2-59:1993. Environmental testing. Test methodsTest Fe and guidance. Vibration (sine-beat method)
BS EN 60068-2-6:1996, IEC 60068-2-6:1995. Environmental testing. Test methodsTest Fc. Vibration (sinusoidal)
BS EN 60068-2-6:2008. Environmental testingTests. Test Fc. Vibration (sinusoidal)
BS EN 60068-2-60:1996, IEC 60068-2-60:1995. Environmental testing. Test methodsTest Ke. Flowing mixed gas corrosion test
BS EN 60068-2-61:1994, IEC 60068-2-61:1991. Environmental testing. Test methodsTest Z/ABDM. Climatic sequence
BS EN 60068-2-62:1996, IEC 60068-2-62:1991. Environmental testing. Test methodsTest Ef. Impact, pendulum hammer
BS EN 60068-2-63:1995, IEC 60068-2-63:1991. Environmental testing. Test methodsTest Eq: Impact, spring hammer
BS EN 60068-2-64:1995, IEC 60068-2-64:1993. Environmental testing. Test methodsTest Fh. Vibration, broad-band random (digital control) and guidance
BS EN 60068-2-64:2008. Environmental testingTests. Test Fh. Vibration, broadband random and guidance
BS EN 60068-2-65:1995, IEC 60068-2-65:1993. Environmental testing. Test methodsTest Fg. Vibration, acoustically induced
BS EN 60068-2-65:2013. Environmental testingTests. Test Fg: Vibration. Acoustically induced method
BS EN 60068-2-66:1995, IEC 60068-2-66:1994. Environmental testing. Test methodsTest Cx. Damp heat, steady state (unsaturated pressurized vapour)
BS EN 60068-2-67:1996, IEC 60068-2-67:1995. Environmental testing. Test methodsTest Cy. Damp heat, steady state, accelerated test primarily intended for components
BS EN 60068-2-68:1996, IEC 60068-2-68:1994. Environmental testing. Test methodsTest L. Dust and sand
BS EN 60068-2-69:1996, IEC 60068-2-69:1995. Environmental testing. Test methodsTests. Test Te. Solderability testing of electronic components for surface mount technology by the wetting balance method
BS EN 60068-2-69:2007. Environmental testingTests. Test Te. Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method
BS EN 60068-2-7:1993, IEC 60068-2-7:1983. Environmental testing. Test methodsTest Ga and guidance. Acceleration, steady state
BS EN 60068-2-70:1996, IEC 60068-2-70:1995. Environmental testing. Test methodsTest Xb. Abrasion of markings and letterings caused by rubbing of fingers and hands
BS EN 60068-2-74:2000, IEC 60068-2-74:1999. Environmental testing. Test methodsTest Xc: Fluid contamination
BS EN 60068-2-75:1997, IEC 60068-2-75:1997. Environmental testing. Test methodsTest Eh. Hammer tests
BS EN 60068-2-77:1999, IEC 60068-2-77:1999. Environmental testing. Test methodsBody strength and impact shock
BS EN 60068-2-78:2002, IEC 60068-2-78:2001. Environmental testing. Test methodsTest Cab. Damp heat, steady state
BS EN 60068-2-78:2013. Environmental testingTests. Test Cab: Damp heat, steady state
BS EN 60068-2-80:2005. Environmental testingTests
BS EN 60068-2-81:2003. Environmental testing. Test methodsTest Ei. Shock. Shock response spectrum synthesis
BS EN 60068-2-82:2007. Environmental testingTests. Test Tx. Whisker test methods for electronic and electric components
BS EN 60068-2-83:2011. Environmental testing Tests. Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste
BS EN 60068-2-9:2000, IEC 60068-2-9:1975. Environmental testing. Test methodsTests. Guidance for solar radiation testing
BS EN 60068-3-1:1999, IEC 60068-3-1:1974,IEC 60068-3-1A:1978. Environmental testing. GuidanceCold and dry heat tests
BS EN 60068-3-1:2011. Environmental testingSupporting documentation and guidance. Cold and dry heat tests
BS EN 60068-3-11:2007. Environmental testingSupporting documentation and guidance
BS EN 60068-3-2:1999, IEC 60068-3-2:1976. Environmental testing. GuidanceCombined temperature/low air pressure tests
BS EN 60068-3-3:1993. Environmental testing. GuidanceEnvironmental testing. Miscellaneous. Guide to seismic test methods for equipment
BS EN 60068-3-4:2002, IEC 60068-3-4:2001. Environmental testingSupporting documentation and guidance
BS EN 60068-3-5:2002, IEC 60068-3-5:2001. Environmental testing. GuidanceConfirmation of the performance of temperature chambers
BS EN 60068-3-6:2002, IEC 60068-3-6:2001. Environmental testing. GuidanceConfirmation of the performance of temperature/humidity chambers
BS EN 60068-3-7:2002, IEC 60068-3-7:2001. Environmental testing. GuidanceMeasurements in temperature chambers for tests A and B (with load)
BS EN 60068-3-8:2003. Environmental testingSupporting documentation and guidance
BS EN 60068-4:1996, IEC 60068-4:1987. Environmental testingInformation for specification writers. Test summaries
BS EN 60068-5-2:2000, IEC 60068-5-2:1990. Environmental testing. Guide to drafting of test methodsTerms and definitions
BS EN 60071-1:1996, IEC 60071-1:1993. Insulation co-ordinationDefinitions, principles and rules
BS EN 60071-1:2006+A1:2010. Insulation co-ordinationDefinitions, principles and rules
BS EN 60071-2:1997, IEC 60071-2:1996. Insulation co-ordinationApplication guide
BS EN 60073:1993, IEC 60073:1991. Specification for coding of indicating devices and actuators by colours and supplementary means
BS EN 60073:1997, IEC 60073:1996. Basic and safety principles for man-machine interface, marking and identification. Coding principles for indication devices and actuators
BS EN 60073:2002. Basic and safety principles for man-machine interface, marking and identification. Coding principles for indicators and actuators
BS EN 60076-1:1997. Power transformersGeneral
BS EN 60076-1:2011. Power transformersGeneral
BS EN 60076-10:2001, IEC 60076-10:2001. Power transformersDetermination of sound levels
BS EN 60076-11:2004. Power transformers Dry-type transformers
BS EN 60076-13:2006. Power transformersSelf-protected liquid-filled transformers
BS EN 60076-16:2011. Power transformersTransformers for wind turbines applications
BS EN 60076-18:2012. Power transformersMeasurement of frequency response
BS EN 60076-2:2011. Power transformersTemperature rise for liquid-immersed transformers
BS EN 60076-3:2001. Power transformersInsulation levels, dielectric tests and external clearances in air
BS EN 60076-4:2002. Power transformersGuide to the lightning impulse and switching impulse testing. Power transformers and reactors
BS EN 60076-5:2001, IEC 60076-5:2000. Power transformersAbility to withstand short circuit
BS EN 60076-5:2006. Power transformersAbility to withstand short-circuit
BS EN 60076-6:2008. Power transformersReactors
BS EN 60077-1:2002. Railway applications. Electric equipment for rolling stockGeneral service conditions and general rules
BS EN 60077-2:2002. Railway applications. Electric equipment for rolling stockElectrotechnical components. General rules
BS EN 60077-3:2002. Railway applications. Electric equipment for rolling stockElectrotechnical components. Rules for d.c. circuit-breakers
BS EN 60077-4:2003. Railway applications. Electric equipment for rolling stockElectrotechnical components. Rules for AC circuit-breakers
BS EN 60077-5:2003. Railway applications. Electrotechnical equipment for rolling stockElectrotechnical components. Rules for HV fuses
BS EN 60079-0:2004. Electrical apparatus for explosive gas atmospheresGeneral requirements
BS EN 60079-0:2006. Electrical apparatus for explosive gas atmospheresGeneral requirements
BS EN 60079-0:2009. Explosive atmospheresEquipment. General requirements
BS EN 60079-0:2012. Explosive atmospheresEquipment. General requirements
BS EN 60079-1:2004. Electrical apparatus for explosive gas atmospheresFlameproof enclosures 'd'
BS EN 60079-1:2007. Explosive atmospheresEquipment protection by flameproof enclosures "d"
BS EN 60079-10:1996, IEC 60079-10:1995. Electrical apparatus for explosive gas atmospheresClassification of hazardous areas
BS EN 60079-10:2003. Electrical apparatus for explosive gas atmospheresClassification of hazardous areas
BS EN 60079-10-1:2009. Explosive atmospheresClassification of areas. Explosive gas atmospheres
BS EN 60079-10-2:2009. Explosive atmospheresClassification of areas. Combustible dust atmospheres
BS EN 60079-11:2007. Explosive atmospheres Equipment protection by intrinsic safety "i"
BS EN 60079-11:2012. Explosive atmospheresEquipment protection by intrinsic safety "i"
BS EN 60079-13:2010. Explosive atmospheresEquipment protection by pressurized room "p"
BS EN 60079-14:1997, IEC 60079-14:1996. Electrical apparatus for explosive gas atmospheresElectrical installations in hazardous areas (other than mines)
BS EN 60079-14:2003. Electrical apparatus for explosive gas atmospheresElectrical installations in hazardous areas (other than mines)
BS EN 60079-14:2008. Explosive atmospheresElectrical installations design, selection and erection
BS EN 60079-15:2003. Electrical apparatus for explosive gas atmospheresType of protection "n"
BS EN 60079-15:2005. Electrical apparatus for explosive gas atmospheresConstruction, test and marking of type of protection "n" electrical apparatus
BS EN 60079-15:2010. Explosive atmospheresEquipment protection by type of protection "n"
BS EN 60079-17:1997, IEC 60079-17:1996. Electrical apparatus for explosive gas atmospheresInspection and maintenance of electrical installations in hazardous areas (other than mines)
BS EN 60079-17:2003. Electrical apparatus for explosive gas atmospheresInspection and maintenance of electrical installations in hazardous areas (other than mines)
BS EN 60079-17:2007. Explosive atmospheresElectrical installations inspection and maintenance
BS EN 60079-18:2004. Electrical apparatus for explosive gas atmospheresConstruction, test and marking of type of protection encapsulation "m" electrical apparatus
BS EN 60079-18:2009. Explosive atmospheresEquipment protection by encapsulation "m"
BS EN 60079-19:2007. Explosive atmospheresEquipment repair, overhaul and reclamation
BS EN 60079-19:2011. Explosive atmospheresEquipment repair, overhaul and reclamation
BS EN 60079-2:2004. Electrical apparatus for explosive gas atmospheresPressurized enclosures "p"
BS EN 60079-2:2007. Explosive atmospheresEquipment protection by pressurized enclosure "p"
BS EN 60079-20-1:2010. Explosive atmospheresMaterial characteristics for gas and vapour classification. Test methods and data
BS EN 60079-25:2004. Electrical apparatus for explosive gas atmospheresIntrinsically safe systems
BS EN 60079-25:2010. Explosive atmospheresIntrinsically safe electrical systems
BS EN 60079-26:2004. Electrical appartus for explosive gas atmospheresConstruction, test and marking of group II category I G electrical apparatus
BS EN 60079-26:2007. Explosive atmospheresEquipment with equipment protection level (EPL) Ga
BS EN 60079-27:2006. Electrical apparatus for explosive gas atmospheresFieldbus intrinsically safe concept (FISCO) and fieldbus non-incendive concept (FNICO)
BS EN 60079-27:2008. Explosive atmospheresFieldbus intrinsically safe concept (FISCO)
BS EN 60079-28:2007. Explosive atmospheresProtection of equipment and transmission systems using optical radiation
BS EN 60079-29-1:2007. Explosive atmospheresGas detectors. Performance requirements of detectors for flammable gases
BS EN 60079-29-2:2007. Explosive atmospheresGas detectors. Selection, installation, use and maintenance of detectors for flammable gases and oxygen
BS EN 60079-29-4:2010. Explosive atmospheresGas detectors. Performance requirements of open path detectors for flammable gases
BS EN 60079-30-1:2007. Explosive atmospheresElectrical resistance trace heating. General and testing requirements
BS EN 60079-30-2:2007. Explosive atmospheresElectrical resistance trace heating. Application guide for design, installation and maintenance
BS EN 60079-31:2009. Explosive atmospheresEquipment dust ignition protection by enclosure "t"
BS EN 60079-35-1:2011. Explosive atmospheresCaplights for use in mines susceptible to firedamp. General requirements. Construction and testing in relation to the risk of explosion
BS EN 60079-35-2:2012. Explosive atmospheresCaplights for use in mines susceptible to firedamp. Performance and other safety-related matters
BS EN 60079-5:2007. Explosive atmospheresEquipment protection by powder filling "q"
BS EN 60079-6:2007. Explosive atmospheresEquipment protected by oil immersion "o"
BS EN 60079-7:2003. Electrical apparatus for explosive gas atmospheresIncreased safety "e"
BS EN 60079-7:2007. Explosive atmospheresEquipment protection by increased safety "e"
BS EN 60081:1994. Specification for tubular fluorescent lamps for general lighting service
BS EN 60081:1998+A4:2010. Double-capped fluorescent lamps. Performance specifications
BS EN 60085:2004. Electrical insulation. Thermal classification
BS EN 60085:2008. Electrical insulation. Thermal evaluation and designation
BS EN 60086-1:1996. Primary batteriesGeneral
BS EN 60086-1:1999. Primary batteriesGeneral
BS EN 60086-1:2001. Primary batteriesGeneral
BS EN 60086-1:2007. Primary batteriesGeneral
BS EN 60086-1:2011. Primary batteriesGeneral
BS EN 60086-2:1996, IEC 60086-2:1994. Primary batteriesSpecification sheets
BS EN 60086-2:1998. Primary batteriesSpecification sheets
BS EN 60086-2:2001. Primary batteries.Physical and electrical specifications
BS EN 60086-2:2007. Primary batteriesPhysical and electrical specifications
BS EN 60086-2:2011. Primary batteriesPhysical and electrical specifications
BS EN 60086-3:1996. Primary batteriesWatch batteries
BS EN 60086-3:2005. Primary batteriesWatch batteries
BS EN 60086-3:2011. Primary batteriesWatch batteries
BS EN 60086-4:1996, IEC 60086-4:1996. Primary batteriesSafety standard for lithium batteries
BS EN 60086-4:2000, IEC 60086-4:2000. Primary batteriesSafety standard for lithium batteries
BS EN 60086-4:2007. Primary batteriesSafety of lithium batteries
BS EN 60086-5:2001. Primary batteriesSafety of batteries with aqueous electrolyte
BS EN 60086-5:2005. Primary batteriesSafety of batteries with aqueous electrolyte
BS EN 60086-5:2011. Primary batteriesSafety of batteries with aqueous electrolyte
BS EN 60092-507:2000, IEC 60092-507:2000. Electrical installations in shipsPleasure craft
BS EN 60094-1:1994, BS 6288-1:1994,IEC 60094-1:1981. Magnetic tape sound recording and reproducing systemsSpecification for general conditions and requirements
BS EN 60094-2:1994, BS 6288- 2:1990,IEC 60094-2:1975. Magnetic tape sound recording and reproducing systemsCalibration tapes
BS EN 60094-2:1996, BS 6288-2:1995,IEC 60094-2:1994. Magnetic tape sound recording and reproducing systemsCalibration tapes
BS EN 60094-3:1997, BS 6288-3:1990,IEC 60094-3:1979. Magnetic tape sound recording and reproducing systemsMethods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape
BS EN 60094-4:1994, BS 6288-4:1995,IEC 60094-4:1986. Magnetic tape sound recording and reproducing systemsMechanical magnetic tape properties
BS EN 60094-5:1994, IEC 60094-5:1988. Magnetic tape sound recording and reproducing systemsSpecification for electrical magnetic tape properties
BS EN 60094-7:1994, BS 6288-7:1994,IEC 60094-7:1986. Magnetic tape sound recording and reproducing systemsSpecification for cassettes for commercial tape records and domestic use
BS EN 60095-1:1993
BS EN 60095-1:1993. BS EN 60095-1:1993 Lead-acid starter batteriesGeneral requirements and methods of test
BS EN 60095-1:1993. Lead-acid starter batteriesGeneral requirements and methods of test
BS EN 60095-2:1993. Lead-acid starter batteriesDimensions of batteries and dimensions and marking of terminals
BS EN 60095-4:1993. Lead-acid starter batteriesDimensions of batteries for heavy commercial vehicles
BS EN 60097:1993, IEC 60097:1991. Specification for grid systems for printed circuits
BS EN 60099-1:1994, IEC 60099-1:1991. Surge arrestersNon-linear resistor type gapped surge arrestors for a.c. systems
BS EN 60099-4:1993, IEC 60099-4:1991. Surge arrestersMetal-oxide surge arresters without gaps for a.c. systems
BS EN 60099-4:2004+A2:2009. Surge arrestersMetal-oxide surge arresters without gaps for a.c. systems
BS EN 60099-5:1997. Surge arrestersSelection and application recommendations
BS EN 60099-5:2013. Surge arrestersSelection and application recommendations
BS EN 60099-8:2011. Surge arrestersMetal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
BS EN 601:1995. Aluminium and aluminium alloys. Castings. Chemical composition of castings for use in contact with food
BS EN 60107-1:1997, IEC 60107-1:1997. Methods of measurement on receivers for television broadcast transmissionGeneral considerations. Measurements on displays at radio and video frequencies
BS EN 60107-2:1997, IEC 60107-2:1997. Methods of measurement on receivers for television broadcast transmissionAudio channels. General methods and methods for monophonic channels
BS EN 60107-5:1999, IEC 60107-5:1992. Methods of measurement on receivers for television broadcast transmissionElectrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system
BS EN 60107-7:1997, IEC 60107-7:1997. Methods of measurement on receivers for television broadcast transmissionHDTV displays
BS EN 60107-8:1997, IEC 60107-8:1997. Methods of measurement on receivers for television broadcast transmissionMeasurements on D2-MAC/packet equipment
BS EN 60110-1:1998, IEC 60110-1:1998. Power capacitors for induction heating installationsGeneral
BS EN 60112:2003+A1:2009. Method for the determination of the proof and the comparative tracking indices of solid insulating materials
BS EN 60115-1:2001+A1:2001. Fixed resistors for use in electronic equipmentGeneric specification
BS EN 60115-1:2011. Fixed resistors for use in electronic equipmentGeneric specification
BS EN 60115-8:2012. Fixed resistors for use in electronic equipmentSectional specification. Fixed surface mount resistors
BS EN 60115-9:2004. Fixed resistors for use in electronic equipmentSectional specification. Fixed surface mount resistor networks with individually measurable resistors
BS EN 60115-9-1:2004. Fixed resistors for use in electronic equipmentBlank detail specification. Fixed surface mount resistor networks with individually measurable resistors
BS EN 60118-0:1993, IEC 60118-0:1983. Hearing aidsMethods for measurement of electroacoustical characteristics
BS EN 60118-1:1995, IEC 60118-1:1995. Hearing aidsHearing aids with induction pick-up coil input
BS EN 60118-12:1997, IEC 60118-12:1996. Hearing aidsDimensions of electrical connector systems
BS EN 60118-13:1998, IEC 60118-13:1997. Hearing aidsElectromagnetic compatibility (EMC). Product standard
BS EN 60118-13:2005. Electroacoustics. Hearing aidsElectromagnetic compatibility (EMC)
BS EN 60118-13:2011. Electroacoustics. Hearing aidsElectromagnetic compatibility (EMC)
BS EN 60118-14:1998, IEC 60118-14:1998. Hearing aidsSpecification of a digital interface device
BS EN 60118-15:2012. Electroacoustics. Hearing aidsMethods for characterising signal processing in hearing aids with a speech-like signal
BS EN 60118-2:1996. Hearing aidsMethods for measurement of electroacoustical characteristics of hearing aids with automatic gain control circuits
BS EN 60118-4:1998, IEC 60118-4:1981. Hearing aidsMagnetic field strength in audio-frequency induction loops for hearing aid purposes
BS EN 60118-4:2006. Electroacoustics. Hearing aidsInduction loop systems for hearing aid purposes. Magnetic field strength
BS EN 60118-6:1999 (Edition 2), IEC 60118-6:1999 Edition 2
BS EN 60118-6:1999 (Edition 2), IEC 60118-6:1999 Edition 2. Hearing aidsCharacteristics of electrical input circuits for hearing aids
BS EN 60118-6:1999. Hearing aidsCharacteristics of electrical input circuits for hearing aids
BS EN 60118-7:1993, IEC 60118-7:1983. Hearing aidsMethods for measurement of the performance characteristics of hearing aids for quality inspection on delivery
BS EN 60118-7:2005. Electroacoustics. Hearing aidsMeasurement of the performance characteristics of hearing aids for production, supply and delivery quality assurance purposes
BS EN 60118-8:2005. Electroacoustics. Hearing aidsMethods of measurement of performance characteritics of hearing aids under simulated in situ working conditions
BS EN 60122-1:2002. Quartz crystal units of assessed qualityGeneric specification
BS EN 60122-3:2001. Quartz crystal units of assessed qualityStandard outlines and lead connections
BS EN 60122-3:2010. Quartz crystal units of assessed qualityStandard outlines and lead connections
BS EN 60127-1:1991. Miniature fusesDefinitions for miniature fuses and general requirements for miniature fuse-links
BS EN 60127-1:2006+A1:2011. Miniature fusesDefinitions for miniature fuses and general requirements for miniature fuse-links
BS EN 60127-10:2002, IEC 60127-10:2001. Miniature fusesUser guide for miniature fuses
BS EN 60127-2:1991. Miniature fusesSpecification for cartridge fuse-links
BS EN 60127-2:2003+A2:2010. Miniature fusesCartridge fuse-links
BS EN 60127-3:1991. Miniature fusesSpecification for sub-miniature fuse-links
BS EN 60127-3:1996, IEC 60127-3:1988 + A1:1991. Miniature fusesSpecification for sub-miniature fuse-links
BS EN 60127-4:1998. Miniature fusesUniversal modular fuse-links (UMF)
BS EN 60127-4:2005+A2:2013. Miniature fusesUniversal modular fuse-links (UMF). Through-hole and surface mount types
BS EN 60127-5:1991. Miniature fusesGuide for the quality assessment of miniature fuse-links
BS EN 60127-6:1994, IEC 60127-6:1994. Miniature fusesFuse-holders for miniature cartridge fuse-links
BS EN 60127-7:2013. Miniature fusesMiniature fuse-links for special applications
BS EN 60129:1994, IEC 60129:1984. Specification for alternating current disconnectors and earthing switches
BS EN 60130-17:1999, IEC 60130-17:1998. Connectors for frequencies below 3 MHzDetail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries
BS EN 60130-9:1997, IEC 60130-9:1989. Connectors for frequencies below 3 MHzCircular connectors for radio and associated sound equipment
BS EN 60130-9:2001, IEC 60130-9:2000. Connectors for frequencies below 3 MHzCircular connectors for radio and associated sound equipment
BS EN 60130-9:2011. Connectors for frequencies below 3 MHzCircular connectors for radio and associated sound equipment
BS EN 60133:2001, IEC 60133:2000. Dimensions of pot-cores made of magnetic oxides and associated parts
BS EN 60137:1996, IEC 60137:1995. Insulated bushings for alternating voltages above 1 kV
BS EN 60137:2003. Insulated bushings for alternating voltages above 1000 V
BS EN 60137:2008. Insulated bushings for alternating voltages above 1000 V
BS EN 60139:2001, IEC 60139:2000. Preparation of outline drawings for cathode-ray tubes, their components, connections and gauges
BS EN 60143-1:1993. Series capacitors for power systemsGeneral. Performance, testing and rating. Safety requirements. Guide for installation
BS EN 60143-1:2004. Series capacitors for power systemsGeneral
BS EN 60143-2:1995, IEC 60143-2:1994. Series capacitors for power systemsProtective equipment for series capacitor banks
BS EN 60143-2:2013. Series capacitors for power systemsProtective equipment for series capacitor banks
BS EN 60143-3:1998, IEC 60143-3:1998. Series capacitors for power systemsInternal fuses
BS EN 60143-4:2010. Series capacitors for power systemsThyristors controlled series capacitors
BS EN 60146-1-1:1993, IEC 60146-1-1:1991. Semiconductor convertors. General requirements and line commutated convertors.Specifications of basic requirements
BS EN 60146-1-1:2010. Semiconductor converters. General requirements and line commutated convertersSpecification of basic requirements
BS EN 60146-1-3:1993, IEC 60146-1-3:1991. Semiconductor convertors. General requirements and line commutated convertorsTransformers and reactors
BS EN 60146-2:2000, IEC 60146-2:1999. Semiconductor convertors. General requirements and line commutated convertorsSelf-commutated semiconductor converters including direct d.c. converters
BS EN 60154-1:1996, IEC 60154-1:1982. Flanges for waveguidesGeneral requirements
BS EN 60154-2:1997, IEC 60154-2:1980. Flanges for waveguidesRelevant specifications for flanges for ordinary rectangular waveguides
BS EN 60155:1995, IEC 60155:1993. Glow-starters for fluorescent lamps
BS EN 60156:1996, IEC 60156:1995. Insulating liquids. Determination of the breakdown voltage at power frequency. Test method
BS EN 60168:1995, IEC 60168:1994. Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000V
BS EN 60169-21:1997, IEC 60129-21:1985. Radio-frequency connectorsTwo types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling. Characteristic impedance 50 ohms (types SC-A and SC-B)
BS EN 60169-23:1994, IEC 60169-23:1991. Radio-frequency connectors.Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in)
BS EN 60169-24:1994, IEC 60169-24:1991. Radio-frequency connectors.Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F)
BS EN 60169-25:1994, IEC 60169-25:1992. Radio-frequency connectors.Two-pole screw (¾-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (Type TWHN)
BS EN 60172:1994+A2:2010, IEC 60172:1987. Test procedure for the determination of the temperature index of enamelled winding wires
BS EN 60182-2:1991. Basic dimensions of winding wiresSpecification for maximum overall diameters of enamelled round winding wires
BS EN 60188:2001, IEC 60188:2001. High-pressure mercury vapour lamps. Performance specifications
BS EN 60191-3:2000, IEC 60191-3:1999. Mechanical standardization of semiconductor devicesGeneral rules for the preparation of outline drawings of integrated circuits
BS EN 60191-4:2000, IEC 60191-4:1999. Mechanical standardization of semiconductor devicesCoding system and classification into forms of package outlines for semiconductor device packages
BS EN 60191-6:2004. Mechanical standardization of semiconductor devicesGeneral rules for the preparation of outline drawings of surface mounted semiconductor device packages
BS EN 60191-6:2009. Mechanical standardization of semiconductor devicesGeneral rules for the preparation of outline drawings of surface mounted semiconductor device packages
BS EN 60191-6-1:2001, IEC 60191-6-1:2001. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packagesDesign guide for gull-wing lead terminals
BS EN 60191-6-10:2003. Mechanical standardization of semiconductor devicesGeneral rules for the preparation of outline drawings of surface mounted semiconductor device packages
BS EN 60191-6-12:2002. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packagesDesign guide for fine-pitch land grid array (FLGA). Rectangular type
BS EN 60191-6-12:2011. Mechanical standardization of semiconductor devicesGeneral rules for the preparation of outline drawings of surface mounted semiconductor device packages. Design guidelines for fine-pitch land grid array (FLGA)
BS EN 60191-6-13:2007. Mechanical standardization of semiconductor devicesDesign guideline of open-top-type sockets for fine-pitch ball grid array and fine-pitch land grid array (FBGA/FLGA)
BS EN 60191-6-16:2007. Mechanical standardization of semiconductor devicesGlossary of semiconductor tests and burn-in sockets for BGA, LGA, FBGA and FLGA
BS EN 60191-6-17:2011. Mechanical standardization of semiconductor devicesGeneral rules for the preparation of outline drawings of surface mounted semiconductor device packages. Design guide for stacked packages. Fine-pitch ball grid array and fine-pitch land grid array (P-PFBGA and P-PFLGA)
BS EN 60191-6-18:2010. Mechanical standardization of semiconductor devicesGeneral rules for the preparation of outline drawings of surface mounted semiconductor device packages. Design guide for ball grid array (BGA)
BS EN 60191-6-19:2010. Mechanical standardization of semiconductor devicesMeasurement methods of the package warpage at elevated temperature and the maximum permissible warpage
BS EN 60191-6-2:2002, IEC 60191-6-2:2001. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packagesDesign guide for 1,50 mm, 1,27 mm and 1,00 mm pitch ball and column terminal packages
BS EN 60191-6-20:2010. Mechanical standardization of semiconductor devicesGeneral rules for the preparation of outline drawings of surface mounted semiconductor device packages. Measuring methods for package dimensions of small outline J-lead packages (SOJ)
BS EN 60191-6-21:2010. Mechanical standardization of semiconductor devicesGeneral rules for the preparation of outline drawings of surface mounted semiconductor device packages. Measuring methods for package dimensions of small outline packages (SOP)
BS EN 60191-6-22:2013. Mechanical standardization of semiconductor devicesGeneral rules for the preparation of outline drawings of surface mounted semiconductor device packages. Design guide for semiconductor packages Silicon Fine-pitch Ball Grid Array and Silicon Fine-pitch Land Grid Array (S-FBGA and S-FLGA)
BS EN 60191-6-3:2001, IEC 60191-6-3:2001. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packagesMeasuring methods for package dimensions of quad flat packs (QFP)
BS EN 60191-6-4:2003. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packagesMeasuring methods for package dimensions of ball grid array (BGA)
BS EN 60191-6-5:2001, IEC 60191-6-5:2001. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packagesDesign guide for fine-pitchball grid array (FBGA)
BS EN 60191-6-6:2001, IEC 60191-6-6:2001. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packagesDesign guide for fine pitch land grid array (FLGA)
BS EN 60191-6-8:2001, IEC 60191-6-8:2001. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packagesDesign guide for glass sealed ceramic quad flatpack (G-QFP)
BS EN 60192:1993. Specification for low pressure sodium vapour lamps
BS EN 60192:2001, IEC 60192:2001. Low pressure sodium vapour lamps. Performance specification
BS EN 60193:1999. Hydraulic turbines, storage pumps and pump-turbines. Model acceptance tests
BS EN 60194:2006. Printed board design, manufacture and assembly. Terms and definitions
BS EN 60196:2009. IEC standard frequencies
BS EN 602:1995. Aluminium and aluminium alloys. Wrought products. Chemical composition of semi products used for the fabrication of articles for use in contact with food
BS EN 60204-1:1993. Safety of machinery. Electrical equipment of machinesSpecification for general requirements
BS EN 60204-1:1998, IEC 60204-1:1997. Safety of machinery. Electrical equipment of machinesGeneral requirements
BS EN 60204-1:2006+A1:2009. Safety of machinery. Electrical equipment of machinesGeneral requirements
BS EN 60204-11:2000, IEC 60204-11:2000. Safety of machinery. Electrical equipment of machinesRequirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV
BS EN 60204-3-1:1992. Safety of machinery. Electrical equipment of machinesParticular requirements for sewing machines, units and systems
BS EN 60204-31:1998. Safety of machinery. Electrical equipment of machinesParticular safety and EMC requirements for sewing machines, units and systems
BS EN 60204-31:2013. Safety of machinery. Electrical equipment of machinesParticular safety and EMC requirements for sewing machines, units and systems
BS EN 60204-32:1998, IEC 60204-32:1998. Safety of machinery. Electrical equipment of machinesRequirements for hoisting machines
BS EN 60204-32:2008. Safety of machinery. Electrical equipment of machinesRequirements for hoisting machines
BS EN 60204-33:2011. Safety of machinery. Electrical equipment of machinesRequirements for semiconductor fabrication equipment
BS EN 60205:2001. Calculation of the effective parameters of magnetic piece parts
BS EN 60205:2006+A1:2009. Calculation of the effective parameters of magnetic piece parts
BS EN 60212:2011. Standard conditions for use prior to and during the testing of solid electrical insulating materials
BS EN 60214:1998. On-load tap-changers
BS EN 60214-1:2003. Tap-changersPerformance requirements and test methods
BS EN 60215:1996, BS 3192:1996. Safety requirements for radio transmitting equipment
BS EN 60216-1:2002, IEC 60216-1:2001. Guide for the determination of thermal endurance properties of electrical insulating materialsAgeing procedures and evaluation of test results
BS EN 60216-1:2013. Electrical insulating materials. Thermal endurance propertiesAgeing procedures and evaluation of test results
BS EN 60216-2:2005. Electrical insulating materials. Thermal endurance propertiesDetermination of thermal endurance properties of electrical insulating materials. Choice of test criteria
BS EN 60216-3:2002 DISK.
BS EN 60216-3:2002. Electrical insulating materials. Thermal endurance propertiesInstructions for calculating thermal endurance characteristics
BS EN 60216-3:2006
BS EN 60216-3:2006. Electrical insulating materials. Thermal endurance propertiesInstructions for calculating thermal endurance characteristics
BS EN 60216-3:2006. Electrical insulating materialsThermal endurance propertiesInstructions for calculating thermal endurance characteristics
BS EN 60216-3-2:1995, IEC 60216-3-2:1993. Guide for the determination of thermal endurance properties of electrical insulating materials. Instructions for calculating thermal endurance characteristicsCalculations for incomplete data: proof test results up to and including the median time to end-point (equal test groups)
BS EN 60216-4-1:2006. Electrical insulating materials. Thermal endurance propertiesAgeing ovens
BS EN 60216-4-2:2001, IEC 60216-4-2:2000. Guide for the determination of thermal endurance properties of electrical insulating materials. Electrical insulating materials. Thermal endurance propertiesPrecision ovens for use up to 300°C
BS EN 60216-4-3:2000, IEC 60216-4-3:2000. Guide for the determination of thermal endurance properties of electrical insulating materials. Electrical insulating materials. Thermal endurance propertiesAgeing ovens. Multi-chamber ovens
BS EN 60216-5:2003 DISK.
BS EN 60216-5:2003. Electrical insulating materials. Thermal endurance propertiesDetermination of relative thermal endurance index (RTE) of an insulating material
BS EN 60216-5:2003. Electrical insulating materials. Thermal endurance propertiesDetermination of relative thermal endurance index (RTE) of an insulating material
BS EN 60216-5:2008. Electrical insulating materials. Thermal endurance propertiesDetermination of relative thermal endurance index (RTE) of an insulating material
BS EN 60216-6:2004. Electrical insulating materials. Thermal endurance propertiesDetermination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
BS EN 60216-6:2006. Electrical insulating materials. Thermal endurance propertiesDetermination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
BS EN 60216-8:2013. Electrical insulating materials. Thermal endurance propertiesInstructions for calculating thermal endurance characteristics using simplified procedures
BS EN 60228:2005. Conductors of insulated cables
BS EN 60229:2008. Electric cables. Tests on extruded oversheaths with a special protective function
BS EN 60230:2002. Impulse tests on cables and their accessories
BS EN 60238:1992. Specification for edison screw lampholders
BS EN 60238:1996. Specification for Edison screw lampholders
BS EN 60238:1999. Edison screw lampholders
BS EN 60238:2004+A2:2011. Edison screw lampholders
BS EN 60239:1997, IEC 60239:1997. Nominal dimensions of cylindrical machined graphite electrodes with threaded sockets and nipples for use in electric arc furnaces
BS EN 60239:2005. Graphite electrodes for electric arc furnaces. Dimensions and designation
BS EN 60240-1:1994, IEC 60240-1:1992. Characteristics of electric infra-red emitters for industrial heatingShort wave infra-red emitters
BS EN 60243-1:1998, IEC 60243-1:1998. Methods of test for electric strength of solid insulating materialsTests at power frequencies
BS EN 60243-1:2013. Electric strength of insulating materials. Test methodsTests at power frequencies
BS EN 60243-2:2001, IEC 60243-2:2001. Methods of test for electric strength of solid insulating materialsAdditional requirements for tests using direct voltage
BS EN 60243-3:1994, IEC 60243-3:1993. Methods of test for electric strength of solid insulating materialsAdditional requirements for impulse tests
BS EN 60243-3:2002, IEC 60243-3:2001. Methods of test for electric strength of solid insulating materialsAdditional requirements for 1,2/50 μs impulse tests
BS EN 60244-1:2000, IEC 60244-1:1999. Methods of measurement for radio transmittersGeneral characteristics for broadcast transmitters
BS EN 60244-10:1993, IEC 60244-10:1986. Methods of measurement for radio transmittersMethods of measurement for television transmitters and transposers employing insertion test signals
BS EN 60244-11:1993, IEC 60244-11:1989. Methods of measurement for radio transmitters.Transposers for FM sound broadcasting
BS EN 60244-12-1:1994, IEC 60244-12-1:1989. Methods of measurement for radio transmitters. Guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting.Characteristics to be specified
BS EN 60244-12-2:1994, IEC 60244-12-2:1989. Methods of measurement for radio transmitters. Guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting.Specification sheets
BS EN 60244-13:1993, IEC 60244-13:1991. Methods of measurement for radio transmittersPerformance characteristics for FM sound broadcasting
BS EN 60244-14:1997, IEC 60244-14:1997. Methods of measurement for radio transmittersExternal intermodulation products caused by two or more transmitters using the same or adjacent antennas
BS EN 60244-15:2000, IEC 60244-15:1999. Methods of measurement for radio transmittersAmplitude-modulated transmitters for sound broadcasting
BS EN 60244-5:1995, IEC 60244-5:1992. Methods of measurement for radio transmittersPerformance characteristics of television transmitters
BS EN 60244-8:1995, IEC 60244-8:1993. Methods of measurement for radio transmittersPerformance characteristics of vestigial-sideband demodulators used for testing television transmitters and transposers
BS EN 60244-9:1995, IEC 60244-9:1993. Methods of measurement for radio transmittersPerformance characteristics for television transposers
BS EN 60247:2004. Insulating liquids. Measurement of relative permittivity, dielectric dissipation factor (tan δ) and d.c. resistivity
BS EN 60249-1:1993, IEC 60249-1:1982. Base materials for printed circuitsBase materials for printed circuits. Test methods
BS EN 60249-2-1:1994, IEC 60249-2-1:1985. SpecificationsSpecification for phenolic cellulose paper copper-clad laminated sheet, high electrical quality
BS EN 60249-2-10:1994, IEC 60249-2-10:1987. SpecificationsEpoxide non-woven/woven glass reinforced copper-clad laminated sheet of defined flammability (vertical burning test)
BS EN 60249-2-11:1994, IEC 60249-2-11:1987. SpecificationsSpecification for thin epoxide woven glass fabric copper-clad laminated sheet, general purpose grade, for use in the fabrication of multilayer printed boards
BS EN 60249-2-12:1994, IEC 60249-2-12:1987. SpecificationsThin epoxide woven glass fabric copper-clad laminated sheet of defined flammability, for use in the fabrication of multilayer printed boards
BS EN 60249-2-13:1994, IEC 60249-2-13:1987. Base material for printed circuits. Specifications.Flexible copper-clad polyimide film, general purpose grade
BS EN 60249-2-14:1994, IEC 60249-2-14:1988. SpecificationsPhenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test), economic quality
BS EN 60249-2-15:1994, IEC 60249-2-15:1987. SpecificationsFlexible copper-clad polyimide film, of defined flammability
BS EN 60249-2-16:1993, IEC 60249-2-16:1992. SpecificationsSpecification No. 16. Polyimide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test)
BS EN 60249-2-17:1993, IEC 60249-2-17:1992. SpecificationsSpecification No. 17. Thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards
BS EN 60249-2-18:1993, IEC 60249-2-18:1992. SpecificationsSpecification No. 18. Bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test)
BS EN 60249-2-19:1993, IEC 60249-2-19:1992. SpecificationsSpecification No. 19. Thin bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards
BS EN 60249-2-2:1994, IEC 60249-2-2:1985. SpecificationsSpecification for phenolic cellulose paper copper-clad laminated sheet, economic quality
BS EN 60249-2-3:1994, IEC 60249-2-3:1987. SpecificationsMetal-clad base materials for printed wiring boards. Copper-clad base material. Specification for epoxide cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test)
BS EN 60249-2-4:1994, IEC 60249-2-4:1987. SpecificationsSpecification for epoxide woven glass fabric copper-clad laminated sheet, general purpose grade
BS EN 60249-2-5:1994, IEC 60249-2-5:1987. SpecificationsSpecification No 5. Epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test)
BS EN 60249-2-6:1994, IEC 60249-2-6:1985. SpecificationsSpecification No.6. Phenolic cellulose paper copper-clad laminated sheet of defined flammability (horizontal burning test)
BS EN 60249-2-7:1994, IEC 60249-2-7:1987. SpecificationsSpecification No.7. Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test)
BS EN 60249-2-8:1995, IEC 60249-2-8:1987. SpecificationsSpecification for flexible copper-clad polyester (PETP) film
BS EN 60249-2-9:1994, IEC 60249-2-9:1987. SpecificationsEpoxide cellulose paper core, epoxide glass cloth surfaces copper-clad laminated sheet of defined flammability (vertical burning test)
BS EN 60252:1994. A.C. motor capacitors
BS EN 60252-1:2001, IEC 60252-1:2001. A.C. motor capacitorsGeneral. Performance, testing and rating. Safety requirements. Guide for installation and operation
BS EN 60252-1:2011. AC motor capacitorsGeneral. Performance, testing and rating. Safety requirements. Guidance for installation and operation
BS EN 60252-2:2003. A.C. motor capacitorsMotor start capacitors
BS EN 60252-2:2011. AC motor capacitorsMotor start capacitors
BS EN 60254-1:1997, IEC 60254-1:1997. Lead-acid traction batteriesGeneral requirements and methods of test
BS EN 60254-1:2005. Lead-acid traction batteriesGeneral requirements and methods of test
BS EN 60254-2:1997. Lead-acid traction batteriesDimensions of cells and terminals and marking of polarity on cells
BS EN 60254-2:2008. Lead-acid traction batteriesDimensions of cells and terminals and marking of polarity on cells
BS EN 60255-1:2010. Measuring relays and protection equipmentCommon requirements
BS EN 60255-1-00:1997, IEC 60255-1-00:1975. Electrical relays.All-or-nothing electrical relays
BS EN 60255-11:2010. Measuring relays and protection equipmentVoltage dips, short interruptions, variations and ripple on auxiliary power supply port
BS EN 60255-151:2009. Measuring relays and protection equipmentFunctional requirements for over/under current protection
BS EN 60255-21-1:1996, IEC 60255-21-1:1988. Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipmentVibration tests (sinusoidal)
BS EN 60255-21-2:1996, IEC 60255-21-2:1988. Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipmentShock and bump tests
BS EN 60255-21-3:1995. Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipmentSeismic tests
BS EN 60255-22-1:2005. Electrical relaysElectrical disturbance tests for measuring relays and protection equipment
BS EN 60255-22-1:2008. Measuring relays and protection equipmentElectrical disturbance tests. 1 MHz burst immunity tests
BS EN 60255-22-2:1997, IEC 60255-22-2:1996. Electrical relays. Electrical disturbance tests for measuring relays and protection equipmentElectrostatic discharge tests
BS EN 60255-22-2:2008. Measuring relays and protection equipmentElectrical disturbance tests. Electrostatic discharge tests
BS EN 60255-22-3:2001, IEC 60255-22-3:2000. Electrical relays. Electrical disturbance tests for measuring relays and protection equipmentRadiated electromagnetic field disturbance tests
BS EN 60255-22-3:2008. Measuring relays and protection equipmentElectrical disturbance tests. Radiated electromagnetic field immunity
BS EN 60255-22-4:2002. Electrical relays. Electrical disturbance tests for measuring relays and protection equipmentElectrical fast transient/burst immunity test
BS EN 60255-22-4:2008. Measuring relays and protection equipmentElectrical disturbance tests. Electrical fast transient/burst immunity test
BS EN 60255-22-5:2002. Electrical relays. Electrical disturbance tests for measuring relays and protection equipmentSurge immunity test
BS EN 60255-22-5:2011. Measuring relays and protection equipmentElectrical disturbance tests. Surge immunity test
BS EN 60255-22-6:2001. Electrical relays. Electrical disturbance tests for measuring relays and protection equipmentImmunity to conducted disturbances induced by radio frequency fields
BS EN 60255-22-7:2003. Electrical relays. Electrical disturbance tests for measuring relays and protection equipmentPower frequency immunity tests
BS EN 60255-23:1997, IEC 60255-23:1994. Electrical relaysContact performance
BS EN 60255-24:2001, IEC 60255-24:2001. Electrical relaysCommon format for transient data exchange (COMTRADE) for power systems
BS EN 60255-25:2000, IEC 60255-25:2000. Electrical relaysElectromagnetic emission tests for measuring relays and protection equipment
BS EN 60255-26:2005. Electrical relaysElectromagnetic compatibility requirements for measuring relays and protection equipment
BS EN 60255-26:2009. Measuring relays and protection equipmentElectromagnetic compatibility requirements
BS EN 60255-27:2005. Measuring relays and protection equipmentProduct safety requirements
BS EN 60255-3:1998. Electrical relaysSingle input energizing quantity measuring relays with dependent or independent time
BS EN 60255-5:2001, IEC 60255-5:2000. Electrical relaysInsulation coordination for measuring relays and protection equipment. Requirements and tests
BS EN 60255-6:1995. Electrical relaysMeasuring relays and protection equipment
BS EN 60255-8:1998. Electrical relaysThermal electrical relays
BS EN 60264-1:1994+A1:2009, IEC 60264-1:1968. Packaging of winding wiresContainers for round winding wires
BS EN 60264-2-1:1996, IEC 60264-2-1:1989. Packaging for winding wiresCylindrical barrelled delivery spools
BS EN 60264-2-2:1996, IEC 60264-2-2:1990. Packaging of winding wiresCylindrical barrelled delivery spools. Specification for returnable spools made from thermoplastic material
BS EN 60264-2-3:1996, IEC 60264-2-3:1990. Packaging of winding wiresCylindrical barrelled delivery spools. Specification for non-returnable spools made from thermoplastic material
BS EN 60264-3-1:1996, IEC 60264-3-1:1989. Packaging of winding wires. Taper barrelled delivery spoolsBasic dimensions
BS EN 60264-3-1:2000, IEC 60264-3-1:1999. Packaging of winding wires. Taper barrelled delivery spoolsBasic dimensions
BS EN 60264-3-2:1996, IEC 60264-3-2:1990. Packaging of winding wires. Taper barrelled delivery spoolsSpecification for returnable spools made from thermoplastic material
BS EN 60264-3-2:1999, IEC 60264-3-2:1999. Packaging of winding wires. Taper barrelled delivery spoolsSpecification for returnable spools made from thermoplastic materials
BS EN 60264-3-3:1996, IEC 60264-3-3:1990. Packaging of winding wiresTaper barrelled delivery spools. Specification for non-returnable spools made from thermoplastic material
BS EN 60264-3-4:1996, IEC 60264-3-4:1990. Packaging of winding wires. Taper barrelled delivery spoolsBasic dimensions of containers for taper barrelled delivery spools
BS EN 60264-3-4:1999, IEC 60264-3-4:1999. Packaging of winding wires. Taper barrelled delivery spoolsBasic dimensions of containers for taper barrelled delivery spools
BS EN 60264-3-5:1998, IEC 60264-3-5:1996. Packaging of winding wires. Taper barrelled delivery spoolsSpecification for spool containers made from thermoplastic material
BS EN 60264-3-5:1999, IEC 60264-3-5:1999. Packaging of winding wires. Taper barrelled delivery spoolsSpecification for spool containers made from thermoplastic material
BS EN 60264-4-1:1996, IEC 60264-4-1:1989. Packaging of winding wires. Methods of testDelivery spools made from thermoplastic material
BS EN 60264-4-1:2010. Packaging of winding wiresMethods of test. Delivery spools made from thermoplastic materials
BS EN 60264-4-2:1995, IEC 60264-4-2:1992. Packaging of winding wiresMethods of test. Containers made from thermoplastic material for taper barrelled delivery spools
BS EN 60264-5-1:1997, IEC 60264-5-1:1997. Packaging of winding wires. Cylindrical barrelled delivery spools with conical flangesBasic dimensions
BS EN 60264-5-2:2001, IEC 60264-5-2:2001. Packaging of winding wires. Cylindrical barrelled delivery spools with conical flangesSpecification for returnable spools made from thermoplastic material
BS EN 60265-1:1998, IEC 60265-1:1998. Specification for high-voltage switchesSwitches for rated voltages above 1 kV and less than 52 kV
BS EN 60265-2:1994. Specification for high-voltage switchesSpecification for high-voltage switches. High-voltage switches for rated voltages of 52 kV and above
BS EN 60268-12:1995, BS 6840-12:1995,IEC 60268-12:1987. Sound system equipmentApplication of connectors for broadcast and similar use
BS EN 60268-16:1998, BS 6840-16:1998,IEC 60268-16:1998. Sound system equipmentObjective rating of speech intelligibility by speech transmission index
BS EN 60268-16:2003. Sound system equipmentObjective rating of speech intelligibility by speech transmission index
BS EN 60268-16:2011. Sound system equipmentObjective rating of speech intelligibility by speech transmission index
BS EN 60268-3:2001, IEC 60268-3:2001. Sound system equipmentAmplifiers
BS EN 60268-3:2013. Sound system equipmentAmplifiers
BS EN 60268-4:2010. Sound system equipmentMicrophones
BS EN 60268-5:1997. Sound system equipmentLoudspeakers
BS EN 60268-5:2003+A1:2009. Sound system equipmentLoudspeakers
BS EN 60268-7:1996, BS 6840-7:1996,IEC 60268-7:1996. Sound system equipmentHeadphones and earphones
BS EN 60268-7:2011. Sound system equipmentHeadphones and earphones
BS EN 60269-1:1994, BS 88-1:1988,IEC 60269-1:1986. Low-voltage fusesGeneral requirements
BS EN 60269-1:1999, IEC 60269-1:1998. Low-voltage fusesGeneral requirements
BS EN 60269-1:2007+A1:2009, BS 88-1:2007. Low-voltage fusesGeneral requirements
BS EN 60269-2:1995, BS 88-2.1:1988,IEC 60269-2:1986. Low-voltage fusesSupplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)
BS EN 60269-3:1995, BS 88-3.1:1995,IEC 60269-3:1987. BS Low-voltage fusesSupplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)
BS EN 60269-4:1996, BS 88-4:1988. Low-voltage fusesSupplementary requirements for fuse-links for the protection of semiconductor devices
BS EN 60269-4:2007, BS 88-4:2007. Low-voltage fusesSupplementary requirements for fuse-links for the protection of semiconductor devices
BS EN 60269-4:2009+A1:2012, BS 88-4:2009+A1:2012. Low-voltage fuses Supplementary requirements for fuse-links for the protection of semiconductor devices
BS EN 60269-4-1:2002. Low-voltage fuses. Supplementary requirements for fuse-links for the protection of semiconductor devicesSections I to III: Examples of types of standardized fuse-links
BS EN 60269-6:2011. Low-voltage fusesSupplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
BS EN 60270:2001, IEC 60270:2000. High-voltage test techniques. Partial discharge measurements
BS EN 60276:1996, IEC 60276:1968. Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings
BS EN 60282-1:1993, BS 2692- 1:1986,IEC 60282-1:1985. High-voltage fusesCurrent-limiting fuses
BS EN 60282-1:1996, BS 2692-1:1996,IEC 60282-1:1994. High-voltage fusesCurrent-limiting fuses
BS EN 60282-1:2002. High-voltage fusesCurrent-limiting fuses
BS EN 60282-1:2006. High-voltage fusesCurrent-limiting fuses
BS EN 60282-1:2009. High-voltage fusesCurrent-limiting fuses
BS EN 60285:1995, IEC 60285:1993. Alkaline secondary cells and batteries. Sealed nickel-cadmium cylindrical rechargeable single cells
BS EN 60286-1:1998, IEC 60286-1:1997. Packaging of components for automatic handlingTape packaging of components with axial leads on continuous tapes
BS EN 60286-2:1998, IEC 60286-2:1997. Packaging of components for automatic handlingTape packaging of components with unidirectional leads on continuous tapes
BS EN 60286-2:2009. Packaging of components for automatic handlingPackaging of components with unidirectional leads on continuous tapes
BS EN 60286-3:1998, IEC 60286-3:1997. Packaging of components for automatic handlingPackaging of leadless components on continuous tapes
BS EN 60286-3:2007. Packaging of components for automatic handlingPackaging of surface mount components on continuous tapes
BS EN 60286-3:2013. Packaging of components for automatic handlingPackaging of surface mount components on continuous tapes
BS EN 60286-3-1:2009. Packaging of components for automatic handlingPackaging of surface mount components on continuous tapes. Type V. Pressed carrier tapes
BS EN 60286-3-2:2009. Packaging of components for automatic handlingPackaging of surface mount components on continuous tapes. Type VI. Blister carrier tapes of 4 mm width
BS EN 60286-4:1997, IEC 60286-4:1991. Packaging of components for automatic handlingStick magazines for dual-in-line packages
BS EN 60286-4:1998, IEC 60286-4:1997. Packaging of components for automatic handlingStick magazines for electronic components encapsulated in packages of form E and G
BS EN 60286-5:1997. Packaging of components for automatic handlingMatrix trays
BS EN 60286-5:2004+A1:2009. Packaging of components for automatic handlingMatrix trays
BS EN 60286-6:1999, IEC 60286-6:1998. Packaging of components for automatic handlingBulk case packaging for surface mounting components
BS EN 60286-6:2004. Packaging of components for automatic handlingBulk case packaging for surface mounting components
BS EN 60289:1995. Reactors
BS EN 60294:2012. Measurement of the dimensions of a cylindrical component with axial terminations
BS EN 60296:2004. Fluids for electrotechnical applications. Unused mineral insulating oils for transformers and switchgear
BS EN 60296:2012. Fluids for electrotechnical applications. Unused mineral insulating oils for transformers and switchgear
BS EN 60297-3-100:2009. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) seriesBasic dimensions of front panels, subracks, chassis, racks and cabinets
BS EN 60297-3-101:2004. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) seriesSubracks and associated plug-in units
BS EN 60297-3-102:2004. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) seriesInjector/extractor handle
BS EN 60297-3-103:2004. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) seriesKeying and alignment pin
BS EN 60297-3-104:2006. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6mm(19 in) seriesConnector dependent interface dimensions of subracks and plug-in units
BS EN 60297-3-105:2009. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) seriesDimensions and design aspects for 1U high chassis
BS EN 60297-3-106:2010. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) seriesAdaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1
BS EN 60297-3-107:2012. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) seriesDimensions of subracks and plug-in units, small form factor
BS EN 60297-4:1995, IEC 60297-4:1995. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482.6 mm (19 in) seriesSubracks and associated plug-in units. Additional dimensions
BS EN 60297-5-100:2001, IEC 60297-5-100:2001. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482.6 mm (19 in) series. Subracks and associated plug-in unitsDesign overview
BS EN 60297-5-101:2001, IEC 60297-5-101:2001. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482.6 mm (19 in) series. Subracks and associated plug-in unitsInjector/extractor handle
BS EN 60297-5-102:2001, IEC 60297-5-102:2001. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482.6 mm (19 in) series. Subracks and associated plug-in unitsElectromagnetic shielding provision
BS EN 60297-5-103:2001, IEC 60297-5-103:2001. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482.6 mm (19 in) series. Subracks and associated plug-in unitsElectrostatic discharge protection
BS EN 60297-5-104:2001, IEC 60297-5-104:2001. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482.6 mm (19 in) series. Subracks and associated plug-in unitsKeying
BS EN 60297-5-105:2001, IEC 60297-5-105:2001. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482.6 mm (19 in) series. Subracks and associated plug-in unitsAlignments and/or earth pin
BS EN 60297-5-107:2001, IEC 60297-5-107:2001. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482.6 mm (19 in) series. Subracks and associated plug-in unitsRear mounted plug-in units
BS EN 60298:1996, IEC 60298:1990. A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
BS EN 60299:1994, IEC 60299:1994. Household electric blankets. Methods for measuring performance
BS EN 60300-1:2003. Dependability managementDependability management systems
BS EN 60300-2:2004. Dependability managementGuidelines for dependability management
BS EN 60300-3-1:2004. Dependability management. Application guideAnalysis techniques for dependability. Guide on methodology
BS EN 60300-3-11:2009. Dependability managementApplication guide. Reliability centred maintenance
BS EN 60300-3-12:2004. Dependability managementApplication guide. Integrated logistic support
BS EN 60300-3-12:2011. Dependability managementApplication guide. Integrated logistic support
BS EN 60300-3-14:2004. Dependability managementApplication guide
BS EN 60300-3-15:2009. Dependability managementApplication guide. Engineering of system dependability
BS EN 60300-3-16:2008. Dependability managementApplication guide. Guidelines for specification of maintenance support services
BS EN 60300-3-2:2005. Dependability managementApplication guide. Collection of dependability data from the field
BS EN 60300-3-3:2004. Dependability managementApplication guide. Life cycle costing
BS EN 60300-3-4:2008. Dependability managementApplication guide. Guide to the specification of dependability requirements
BS EN 60301:2012. Preferred diameters of wire terminations of capacitors and resistors
BS EN 60305:1996, IEC 60305:1995. Insulators for overhead lines with a nominal voltage above 1 kV. Ceramic or glass insulator units for a.c. systems. Characteristics of insulator units of the cap and pin type
BS EN 60308:2005. Hydraulic turbines. Testing of control systems
BS EN 60309-1:1992. Plugs, socket-outlets and couplers for industrial purposesGeneral requirements
BS EN 60309-1:1998, IEC 60309-1:1997. Plugs, socket-outlets and couplers for industrial purposesGeneral requirements
BS EN 60309-1:1999+A2:2012, IEC 60309-1:1999. Plugs, socket-outlets and couplers for industrial purposesGeneral requirements
BS EN 60309-2:1992, BS 4343:1992. Plugs, socket-outlets and couplers for industrial purposesDimensional interchangeability requirements for pin and contact-tube accessories of harmonized configurations
BS EN 60309-2:1998, IEC 60309-2:1997. Plugs, socket-outlets and couplers for industrial purposesDimensional interchangeability requirements for pin and contact-tube accessories
BS EN 60309-2:1999+A2:2012, IEC 60309-2:1999. Plugs, socket-outlets and couplers for industrial purposes Dimensional interchangeability requirements for pin and contact-tube accessories
BS EN 60309-4:2007+A1:2012. Plugs, socket-outlets and couplers for industrial purposesSwitched socket-outlets and connectors with or without interlock
BS EN 603-1:1997. Aluminium and aluminium alloys. Wrought forging stockTechnical conditions for inspection and delivery
BS EN 60310:1997. Railway applications. Traction transformers and inductors on rolling stock
BS EN 60310:2004. Railway applications. Traction transformers and inductors on board rolling stock
BS EN 60311:1998, IEC 60311:1997. Electric irons for household or similar use. Methods for measuring performance
BS EN 60311:2003+A2:2009. Electric irons for household or similar use. Methods for measuring performance
BS EN 60312:1998, IEC 60312:1998. Vacuum cleaners for household use. Methods of measuring the performance
BS EN 60312:2008. Vacuum cleaners for household use. Methods of measuring the performance
BS EN 60312-1:2013. Vacuum cleaners for household useDry vacuum cleaners. Methods for measuring the performance
BS EN 60315-3:2000. Methods of measurement on radio receivers for various classes of emissionReceivers for amplitude-modulated sound-broadcasting emissions
BS EN 60315-4:1998, IEC 60315-4:1997. Methods of measurement on radio receivers for various classes of emissionReceivers for frequency-modulated sound broadcasting emissions
BS EN 60315-7:1996, BS 4054-7:1996,IEC 60315-7:1995. Methods of measurement on radio receivers for various classes of emissionMethods of measurement on digital satellite radio (DSR) receivers
BS EN 60315-9:1997, BS 4054-9:1997,IEC 60315-9:1996. Methods of measurement on radio receivers for various classes of emissionMeasurement of the characteristics relevant to radio data system (RDS) reception
BS EN 60317-0-1:1996, IEC 60317-0-1:1990. Specification for particular types of winding wires. General requirementsEnamelled round copper wire
BS EN 60317-0-1:1998, IEC 60317-0-1:1997. Specification for particular types of winding wires. General requirementsEnamelled round copper wire
BS EN 60317-0-1:2008. Specifications for particular types of winding wiresGeneral requirements. Enamelled round copper wire
BS EN 60317-0-2:1996, IEC 60317-0-2:1990. Specification for particular types of winding wires. General requirementsEnamelled rectangular copper wire
BS EN 60317-0-2:1998, IEC 60317-0-2:1997. Specification for particular types of winding wires. General requirementsEnamelled rectangular copper
BS EN 60317-0-3:1996, IEC 60317-0-3:1990. Specification for particular types of winding wires. General requirementsEnamelled round aluminium wire
BS EN 60317-0-3:1998, IEC 60317-0-3:1997. Specifications for particular types of winding wiresGeneral requirements. Enamelled round aluminium wire
BS EN 60317-0-3:2008. Specifications for particular types of winding wiresGeneral requirements. Enamelled round aluminium wire
BS EN 60317-0-4:1996, IEC 60317-0-4:1990. Specification for particular types of winding wires. General requirementsGlass-fibre wound bare or enamelled rectangular copper wire
BS EN 60317-0-4:1998, IEC 60317-0-4:1997. Specification for particular types of winding wiresGeneral requirements
BS EN 60317-0-5:1995, IEC 60317-0-5:1992. Specification for particular types of winding wires. General requirementsGlass-fibre braided, bare or enamelled rectangular copper wire
BS EN 60317-0-5:2007. Specifications for particular types of winding wiresGeneral requirements. Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire
BS EN 60317-0-6:2001, IEC 60317-0-6:2001. Specifications for particular types of winding wiresGeneral requirements. Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire
BS EN 60317-0-7:2012. Specifications for particular types of winding wiresGeneral requirements. Fully insulated (FIW) zero-defect enamelled round copper wire with nominal conductor diameter of 0,040 mm to 1,600 mm
BS EN 60317-0-8:2012. Specifications for particular types of winding wiresGeneral requirements. Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire
BS EN 60317-1:1995, IEC 60317-1:1990. Specifications for particular types of winding wiresPolyvinyl acetal enamelled round copper wire, class 105
BS EN 60317-11:1996, IEC 60317-11:1990. Specifications for particular types of winding wiresBunched solderable polyurethane enamelled round copper wires, class 130, with silk covering
BS EN 60317-11:2000, IEC 60317-11:1999. Specifications for particular types of winding wiresBunched solderable polyurethane enamelled round copper wires, class 130, with silk covering
BS EN 60317-12:1995. Specifications for particular types of winding wiresPolyvinyl acetal enamelled round copper wire, class 120
BS EN 60317-12:2010. Specifications for particular types of winding wiresPolyvinyl acetal enamelled round copper wire, class 120
BS EN 60317-13:1995, IEC 60317-13:1990. Specifications for particular types of winding wiresPolyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200
BS EN 60317-13:2010. Specifications for particular types of winding wiresPolyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200
BS EN 60317-14:1995, IEC 60317-14:1990. Specifications for particular types of winding wiresPolyvinyl acetal enamelled round aluminium wire, class 105
BS EN 60317-15:1996, IEC 60317-15:1990. Specifications for particular types of winding wiresPolyesterimide enamelled round aluminium wire, class 180
BS EN 60317-15:2004+A1:2010. Specifications for particular types of winding wiresPolyesterimide enamelled round aluminium wire, class 180
BS EN 60317-16:1996, IEC 60317-16:1990. Specifications for particular types of winding wiresPolyester enamelled rectangular copper wire, class 155
BS EN 60317-17:1996, IEC 60317-17:1990. Specifications for particular types of winding wirePolyvinyl acetal enamelled rectangular copper wire, class 105
BS EN 60317-17:2010. Specifications for particular types of winding wiresPolyvinyl acetal enamelled rectangular copper wire, class 105
BS EN 60317-18:1996, IEC 60317-18:1990. Specifications for particular types of winding wiresPolyvinyl acetal enamelled rectangular copper wire, class 120
BS EN 60317-18:2004+A1:2010. Specifications for particular types of winding wiresPolyvinyl acetal enamelled rectangular copper wire, class 120
BS EN 60317-19:1996, IEC 60317-19:1990. Specifications for particular types of winding wiresSolderable polyurethane enamelled round copper wire overcoated with polyamide, class 130
BS EN 60317-2:1996, IEC 60317-2:1990. Specifications for particular types of winding wiresSolderable polyurethane enamelled round copper wire, class 130, with a bonding layer
BS EN 60317-2:2012. Specifications for particular types of winding wiresSolderable polyurethane enamelled round copper wire, class 130, with a bonding layer
BS EN 60317-20:1996, IEC 60317-20:1990. Specifications for particular types of winding wiresSolderable polyurethane enamelled round copper wire, class 155
BS EN 60317-21:1996, IEC 60317-21:1990. Specifications for particular types of winding wiresSolderable polyurethane enamelled round copper wire overcoated with polyamide, class 155
BS EN 60317-22:1996, IEC 60317-22:1990. Specifications for particular types of winding wiresPolyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
BS EN 60317-22:2004+A1:2010. Specifications for particular types of winding wiresPolyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
BS EN 60317-23:1996, IEC 60317-23:1990. Specifications for particular types of winding wiresSolderable polyesterimide enamelled round copper wire, class 180
BS EN 60317-24:1996, IEC 60317-24:1990. Specifications for particular types of winding wiresPolyester or polyesterimide enamelled round aluminium wire overcoated with polyamide, class 180
BS EN 60317-25:1997, IEC 60317-25:1990. Specifications for particular types of winding wiresPolyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200
BS EN 60317-25:2010. Specifications for particular types of winding wiresPolyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200
BS EN 60317-26:1996+A2:2010. Specifications for particular types of winding wiresPolyamide-imide enamelled round copper wire, class 200
BS EN 60317-27:1996, IEC 60317-27:1990. Specifications for particular types of winding wiresPaper covered rectangular copper wire
BS EN 60317-27:1998, IEC 60317-27:1998. Specifications for particular types of winding wiresPaper tape covered rectangular copper wire
BS EN 60317-28:1997, IEC 60317-28:1990. Specifications for particular types of winding wiresPolyesterimide enamelled rectangular copper wire, class 180
BS EN 60317-29:1996+A2:2010. Specifications for particular types of winding wiresPolyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200
BS EN 60317-3:1996, IEC 60317-3:1990. Specifications for particular types of winding wiresPolyester enamelled round copper wire, class 155
BS EN 60317-30:1997, IEC 60317-30:1990. Specifications for particular types of winding wiresPolyimide enamelled rectangular copper wire, class 220
BS EN 60317-31:1997, IEC 60317-31:1990. Specifications for particular types of winding wiresGlass-fibre wound resin or varnish resin impregnated, bare or enamelled rectangular copper wire, temperature index 180
BS EN 60317-32:1997, IEC 60317-32:1990. Specifications for particular types of winding wiresGlass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155
BS EN 60317-33:1997, IEC 60317-33:1990. Specifications for particular types of winding wiresGlass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
BS EN 60317-34:1997, IEC 60317-34:1997. Specifications for particular types of winding wiresPolyester enamelled round copper wire, class 130 L
BS EN 60317-35:1995, IEC 60317-35:1992. Specifications for particular types of winding wiresSolderable polyurethane enamelled round copper wire, class 155, with a bonding layer
BS EN 60317-36:1995, IEC 60317-36:1992. Specifications for particular types of winding wiresSolderable polyesterimide enamelled round copper wire, class 180, with a bonding layer
BS EN 60317-37:1995, IEC 60317-37:1992. Specifications for particular types of winding wiresPolyesterimide enamelled round copper wire, class 180 with a bonding layer
BS EN 60317-38:1995, IEC 60317-38:1992. Specifications for particular types of winding wiresPolyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200, with a bonding layer
BS EN 60317-39:1995, IEC 60317-39:1992. Specifications for particular types of winding wireGlass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
BS EN 60317-4:1995, IEC 60317-4:1990. Specifications for particular types of winding wiresSolderable polyurethane enamelled round copper wire, class 130
BS EN 60317-40:1995, IEC 60317-40:1992. Specifications for particular types of winding wiresGlass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
BS EN 60317-42:1997+A1:2010, IEC 60317-42:1997. Specifications for particular types of winding wiresPolyester-amide-imide enamelled round copper wire, class 200
BS EN 60317-43:1997+A1:2010. Specifications for particular types of winding wiresAromatic polyimide tape wrapped round copperwire, class 240
BS EN 60317-44:1997+A1:2010. Specifications for particular types of winding wiresAromatic polyimide tape wrapped rectangular copper wire, class 240
BS EN 60317-45:1998, IEC 60317-45:1998. Specifications for particular types of winding wiresPolyester enamelled round copper wire, class 130
BS EN 60317-46:1997, IEC 60317-46:1997. Specifications for particular types of winding wiresAromatic polyimide enamelled round copper wires, class 240
BS EN 60317-47:1997, IEC 60317-47:1997. Specifications for particular types of winding wiresAromatic polyimide enamelled rectangular copper wire, class 240
BS EN 60317-48:2000, IEC 60317-48:1999. Specifications for particular types of winding wiresGlass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155
BS EN 60317-48:2012. Specifications for particular types of winding wiresGlass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155
BS EN 60317-49:2000, IEC 60317-49:1999. Specifications for particular types of winding wiresGlass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180
BS EN 60317-49:2012. Specifications for particular types of winding wires Glass-fibre wound high temperature resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180
BS EN 60317-50:2000, IEC 60317-50:1999. Specifications for particular types of winding wiresGlass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200
BS EN 60317-50:2012. Specifications for particular types of winding wiresGlass-fibre wound silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200
BS EN 60317-51:2001, IEC 60317-51:2001. Specifications for particular types of winding wiresSolderable polyurethane enamelled round copper wire, class 180
BS EN 60317-52:1999, IEC 60317-52:1999. Specifications for particular types of winding wiresAromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220
BS EN 60317-53:1999, IEC 60317-53:1999. Specifications for particular types of winding wiresAromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220
BS EN 60317-55:2008. Specifications for particular types of winding wiresSolderable polyurethane enamelled round copper wire overcoated with polyamide, class 180
BS EN 60317-56:2012. Specifications for particular types of winding wiresSolderable fully insulated (FIW) zero-defect polyurethane enamelled round copper wire, with nominal conductor diameter of 0,040 mm to 1,600 mm, class 180
BS EN 60317-57:2010. Specifications for particular types of winding wiresPolyamide-imide enamelled round copper wire, class 220
BS EN 60317-58:2010. Specifications for particular types of winding wiresPolyamide-imide enamelled rectangular copper wire, class 220
BS EN 60317-60:2012. Specifications for particular types of winding wiresPolyester glass fibre wound minimum class 155 resin or varnish impregnated or not impregnated, bare or enamelled, rectangular copper wire, temperature index 155
BS EN 60317-61:2012. Specifications for particular types of winding wiresPolyester glass fibre wound, minimum class 180, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
BS EN 60317-62:2012. Specifications for particular types of winding wiresPolyester glass fibre wound, minimum class 200 resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
BS EN 60317-7:1995, IEC 60317-7:1990. Specifications for particular types of winding wiresPolyimide enamelled round copper wire, class 220
BS EN 60317-8:1995, IEC 60317-8:1990. Specifications for particular types of winding wiresPolyesterimide enamelled round copper wire, class 180
BS EN 60317-8:2010. Specifications for particular types of winding wiresPolyesterimide enamelled round copper wire, class 180
BS EN 60318-1:1998, IEC 60318-1:1998. Electroacoustics. Simulators of human head and earEar simulator for the calibration of supra-aural earphones
BS EN 60318-1:2009. Electroacoustics. Simulators of human head and earEar simulator for the measurement of supra-aural and circumaural earphones
BS EN 60318-2:1998, IEC 60318-2:1998. Electroacoustics. Simulators of human head and earAn interim acoustic coupler for the calibration of audiometric earphones in the extended high-frequency range
BS EN 60318-3:1998, IEC 60318-3:1998. Electroacoustics. Simulators of human head and earAcoustic coupler for the calibration of supra-aural earphones used in audiometry
BS EN 60318-4:2010. Electroacoustics. Simulators of human head and earOccluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts
BS EN 60318-6:2008. Electroacoustics. Simulators of human head and earMechanical coupler for the measurement of bone vibrators
BS EN 603-2:1997. Aluminium and aluminium alloys. Wrought forging stockMechanical properties
BS EN 60320-1:1996. Appliance couplers for household and similar general purposesGeneral requirements
BS EN 60320-1:2001+A1:2007. Appliance couplers for household and similar general purposesGeneral requirements
BS EN 60320-2-1:2001, IEC 60320-2-1:2000. Appliance couplers for household and similar general purposes. Specification of requirements for individual types of couplerSewing machine couplers
BS EN 60320-2-2:1992. Appliance couplers for household and similar general purposes. Specification of requirements for individual types of couplerInterconnection couplers for household and similar equipment
BS EN 60320-2-2:1999. Appliance couplers for household and similar general purposes. Specification of requirements for individual types of couplerInterconnection couplers for household and similar equipment
BS EN 60320-2-3:1999, IEC 60320-2-3:1998. Appliance couplers for household and similar general purposesAppliance coupler with a degree of protection higher than IPX0
BS EN 60320-2-4:2006+A1:2009. Appliance couplers for household and similar general purposesCouplers dependent on appliance weight for engagement
BS EN 60322:2001, IEC 60322:2001. Railway applications. Electric equipment for rolling stock. Rules for power resistors of open construction
BS EN 60325:2004. Radiation protection instrumentation. Alpha, beta and alpha/beta (beta energy $0G 60 keV) contamination meters and monitors
BS EN 603-3:2000. Aluminium and aluminium alloys. Wrought forging stockTolerances on dimensions and form
BS EN 60332-1-1:2004. Tests on electrical and optical cables under fire conditionsTest for a vertical flame propagation for a single insulated wire or cable. Apparatus
BS EN 60332-1-2:2004. Tests on electric and optical fibre cables under fire conditionsTest for vertical flame propagation for a single insulated wire or cable. Procedure for 1 kW pre-mixed flame
BS EN 60332-1-3:2004. Tests on electric and optical fibre cables under fire conditionsTest for vertical flame propagation for a single vertical insulated wire or cable. Procedure for determination of flaming droplets/particles
BS EN 60332-2-1:2004. Tests on electric and optical fibre cables under fire conditionsTest for vertical flame propagation for a single small insulated wire or cable. Apparatus
BS EN 60332-2-2:2004. Tests on electric and optical fibre cables under fire conditionsTests for vertical flame propagation for a single small insulated wire or cable. Procedure for diffusion flame
BS EN 60332-3-10:2009. Tests on electric and optical fibre cables under fire conditionsTest for vertical flame spread of vertically-mounted bunched wires or cables. Apparatus
BS EN 60332-3-21:2009. Tests on electric and optical fibre cables under fire conditionsTest for vertical flame spread of vertically-mounted bunched wires or cables. Category A F/R
BS EN 60332-3-22:2009. Tests on electric and optical fibre cables under fire conditionsTest for vertical flame spread of vertically-mounted bunched wires or cables. Category A
BS EN 60332-3-23:2009. Tests on electric and optical fibre cables under fire conditionsTest for vertical flame spread of vertically-mounted bunched wires or cables. Category B
BS EN 60332-3-24:2009. Tests on electric and optical fibre cables under fire conditionsTest for vertical flame spread of vertically-mounted bunched wires or cables. Category C
BS EN 60332-3-25:2009. Tests on electric and optical fibre cables under fire conditionsTest for vertical flame spread of vertically-mounted bunched wires or cables. Category D
BS EN 60335-1:1994+A2:2000. Safety of household and similar electrical appliancesGeneral requirements
BS EN 60335-1:2002+A15:2011. Household and similar electrical appliances. SafetyGeneral requirements
BS EN 60335-1:2012. Household and similar electrical appliances. SafetyGeneral requirements
BS EN 60335-2.48:1997. Specification for safety of household and similar electrical appliances. Particular requirementsCommercial electric grillers and toasters
BS EN 60335-2-10:1992. Specification for safety of household and similar electrical appliances. Particular requirementsFloor treatment machines and wet scrubbing machines
BS EN 60335-2-10:1995. Specification for safety of household and similar electrical appliancesParticular requirements for floor treatment machines and wet scrubbing machines
BS EN 60335-2-10:2003+A1:2008. Household and similar electrical appliances. SafetyParticular requirements for floor treatment machines and wet scrubbing machines
BS EN 60335-2-101:2002+A1:2008. Household and similar electrical appliances. SafetyParticular requirements for vaporizers
BS EN 60335-2-102:2006+A1:2010. Household and similar electrical appliances. SafetyParticular requirements for gas, oil and solid-fuel burning appliances having electrical connections
BS EN 60335-2-103:2003. Household and similar electrical appliances. SafetyParticular requirements for drives for gates, doors and windows
BS EN 60335-2-105:2005+A11:2010. Household and similar electrical appliances. SafetyParticular requirements for multifunctional shower cabinets
BS EN 60335-2-106:2007. Household and similar electrical appliances. SafetyParticular requirements for heated carpets and for heating units for room heating installed under removable floor coverings
BS EN 60335-2-108:2008. Household and similar electrical appliances. SafetyParticular requirements for electrolysers
BS EN 60335-2-109:2010. Household and similar electrical appliances. SafetyParticular requirements for UV radiation water treatment appliances
BS EN 60335-2-11:1996. Specification for safety of household and similar electrical appliances. Particular requirementsTumbler dryers
BS EN 60335-2-11:2001. Specification for safety of household and similar electrical appliancesParticular requirements for tumble dryers
BS EN 60335-2-11:2003+A2:2006. Household and similar electrical appliances. SafetyParticular requirements for tumble dryers
BS EN 60335-2-11:2010+A11:2012. Household and similar electrical appliances. SafetyParticular requirements for tumble dryers
BS EN 60335-2-12:1991. Specification for safety of household and similar electrical appliances. Particular requirementsWarming plates and similar appliances
BS EN 60335-2-12:1995, IEC 60335-2-12:1992. Specification for safety of household and similar electrical appliances. Particular requirementsWarming plates and similar appliances
BS EN 60335-2-12:2003+A1:2008. Household and similar electrical appliances. SafetyParticular requirements for warming plates and similar appliances
BS EN 60335-2-13:1991. Specification for safety of household and similar electrical appliances. Particular requirementsFrying pans, deep fat fryers and similar appliances
BS EN 60335-2-13:1996, IEC 60335-2-13:1993. Specification for safety of household and similar electrical appliancesParticular requirements
BS EN 60335-2-13:2003+A2:2008. Household and similar electrical appliances. SafetyParticular requirements for deep fat fryers, frying pans and similar appliances
BS EN 60335-2-13:2010+A11:2012. Household and similar electrical appliances. Safety Particular requirements for deep fat fryers, frying pans and similar appliances
BS EN 60335-2-14:1997. Specification for safety of household and similar electrical appliancesParticular requirements for kitchen machines
BS EN 60335-2-14:2003. Specification for safety of household and similar electrical appliancesParticular requirements for kitchen machines
BS EN 60335-2-14:2006+A1:2008. Household and similar electrical appliances. SafetyParticular requirements for kitchen machines
BS EN 60335-2-15:1991. Specification for safety of household and similar electrical appliances. Particular requirementsAppliances for heating liquids
BS EN 60335-2-15:1996, IEC 60335-2-15:1995. Safety of household and similar electrical appliancesParticular requirements for appliances for heating liquids
BS EN 60335-2-15:2002+A11:2013. Household and similar electrical appliances. SafetyParticular requirements for appliances for heating liquids
BS EN 60335-2-16:1997. Specification for safety of household and similar electrical appliances. Particular requirementsFood waste disposers
BS EN 60335-2-16:2003+A2:2012. Household and similar electrical appliances. SafetyParticular requirements for food waste disposers
BS EN 60335-2-17:1999, IEC 60335-2-17:1998. Specification for safety of household and similar electrical appliancesParticular requirements for blankets, pads and similar flexible heating appliances
BS EN 60335-2-17:2002+A2:2009. Household and similar electrical appliances. SafetyParticular requirements for blankets, pads, clothing and similar flexible heating appliances
BS EN 60335-2-17:2013. Household and similar electrical appliances. SafetyParticular requirements for blankets, pads, clothing and similar flexible heating appliances
BS EN 60335-2-2:1996. Safety of household and similar electrical appliancesParticular requirements for vacuum cleaners and water suction cleaning appliances
BS EN 60335-2-2:2003+A11:2010. Household and similar electrical appliances. SafetyParticular requirements for vacuum cleaners and water-suction cleaning appliances
BS EN 60335-2-2:2010+A1:2013. Household and similar electrical appliances. SafetyParticular requirements for vacuum cleaners and water-suction cleaning appliances
BS EN 60335-2-21:1992. Specification for safety of household and similar electrical appliances. Particular requirementsStorage water heaters
BS EN 60335-2-21:1999. Specification for safety of household and similar electrical appliancesParticular requirements for storage water heaters
BS EN 60335-2-21:2003+A2:2008. Household and similar electrical appliances. SafetyParticular requirements for storage water heaters
BS EN 60335-2-23:1991. Specification for safety of household and similar electrical appliances. Particular requirementsAppliances for skin or hair care
BS EN 60335-2-23:1996. Specification for safety of household and similar electrical appliancesParticular requirements for appliances for skin or hair care
BS EN 60335-2-23:2003+A11:2010. Household and similar electrical appliances. SafetyParticular requirements for appliances for skin or hair care
BS EN 60335-2-24:1994. Specification for safety of household and similar electrical appliances. Particular requirementsRefrigerators, food-freezers and ice-makers
BS EN 60335-2-24:1999, IEC 60335-2-24, Ed 4.1:1999. Specification for safety of household and similar electrical appliancesParticular requirements for refrigerating appliances, ice-cream appliances and ice-makers
BS EN 60335-2-24:2001, IEC 60335-2-24:2000. Safety of household and similar electrical appliancesParticular requirements for refrigerating appliances, ice-cream appliances and ice-makers
BS EN 60335-2-24:2003+A2:2007. Household and similar electrical appliances. SafetyParticular requirements for refrigerating appliances, ice-cream appliances and ice-makers
BS EN 60335-2-24:2010. Household and similar electrical appliances. SafetyParticular requirements for refrigerating appliances, ice-cream appliances and ice makers
BS EN 60335-2-25:1991. Specification for safety of household and similar electrical appliances. Particular requirementsMicrowave ovens
BS EN 60335-2-25:1996. Specification for safety of household and similar electrical appliances. Particular requirementsMicrowave ovens
BS EN 60335-2-25:1997, IEC 60335-2-25:1996. Specification for safety of household and similar electrical appliancesParticular requirements for microwave ovens
BS EN 60335-2-25:2002+A11:2010. Household and similar electrical appliances. SafetyParticular requirements for microwave ovens, including combination microwave ovens
BS EN 60335-2-25:2012. Household and similar electrical appliances. SafetyParticular requirements for microwave ovens, including combination microwave ovens
BS EN 60335-2-26:1991. Specification for safety of household and similar electrical appliances. Particular requirementsClocks
BS EN 60335-2-26:1996, IEC 60335-2-26:1994. Specification for safety of household and similar electrical appliancesParticular requirements for clocks
BS EN 60335-2-26:2003+A1:2008. Household and similar electrical appliances. SafetyParticular requirements for clocks
BS EN 60335-2-27:1992. Specification for safety of household and similar electrical appliances. Particular requirementsUltra-violet and infra-red radiation skin treatment appliances for household and similar use
BS EN 60335-2-27:1997. Specification for safety of household and similar electrical appliances. Particular requirementsSkin exposure to ultraviolet and infrared radiation
BS EN 60335-2-27:2003. Specification for safety of household and similar electrical appliancesParticular requirements for appliances for skin exposure to ultraviolet and infrared radiation
BS EN 60335-2-27:2010. Household and similar electrical appliances. SafetyParticular requirements for appliances for skin exposure to ultraviolet and infrared radiation
BS EN 60335-2-28:1991. Specification for safety of household and similar electrical appliances. Particular requirementsSewing machines
BS EN 60335-2-28:1996. Specification for safety of household and similar electrical appliancesParticular requirements for sewing machines
BS EN 60335-2-28:2003+A1:2008. Household and similar electrical appliances. SafetyParticular requirements for sewing machines
BS EN 60335-2-29:1991. Specification for safety of household and similar electrical appliances. Particular requirementsBattery chargers
BS EN 60335-2-29:1997. Specification for safety of household and similar electrical appliances. Particular requirementsBattery chargers
BS EN 60335-2-29:2004+A2:2010. Household and similar electrical appliances. SafetyParticular requirements for battery chargers
BS EN 60335-2-3:1991. Specification for safety of household and similar electrical appliances. Particular requirementsElectric irons
BS EN 60335-2-3:1995, IEC 60335-2-3:1993. Specification for safety of household and similar electrical appliances. Particular requirementsElectric irons
BS EN 60335-2-3:2002+A11:2010. Household and similar electrical appliances. SafetyParticular requirements for electric irons
BS EN 60335-2-30:1993. Specification for safety of household and similar electrical appliances. Particular requirementsRoom heaters
BS EN 60335-2-30:1997. Specification for safety of household and similar electrical appliances. Particular requirementsRoom heaters
BS EN 60335-2-30:2003. Household and similar electrical appliances. SafetyParticular requirements for room heaters
BS EN 60335-2-30:2009+A11:2012. Household and similar electrical appliances. SafetyParticular requirements for room heaters
BS EN 60335-2-31:1991. Specification for safety of household and similar electrical appliances. Particular requirementsRange hoods
BS EN 60335-2-31:1997, IEC 60335-2-31:1995. Specification for safety of household and similar electrical appliances. Particular requirementsRange hoods
BS EN 60335-2-31:2003+A2:2009. Household and similar electrical appliances. SafetyParticular requirements for range hoods and other cooking fume extractors
BS EN 60335-2-32:1991. Specification for safety of household and similar electrical appliances. Particular requirementsMassage appliances
BS EN 60335-2-32:1996, IEC 60335-2-32:1993. Specification for safety of household and similar electrical appliancesParticular requirements for massage appliances
BS EN 60335-2-32:2003+A1:2008. Household and similar electrical appliances. SafetyParticular requirements for massage appliances
BS EN 60335-2-33:1992. Specification for safety of household and similar electrical appliances. Particular requirementsCoffee mills and coffee grinders
BS EN 60335-2-34:1997, IEC 60335-2-34:1996. Specification for safety of household and similar electrical appliances. Particular requirementsMotor-compressors
BS EN 60335-2-34:2000, IEC 60335-2-34:1999. Specification for safety of household and similar electrical appliancesParticular requirements for motor-compressors
BS EN 60335-2-34:2002+A2:2009. Household and similar electrical appliances. SafetyParticular requirements for motor-compressors
BS EN 60335-2-34:2013. Household and similar electrical appliances. SafetyParticular requirements for motor-compressors
BS EN 60335-2-35:1995. Specification for safety of household and similar electrical appliances. Particular requirementsInstantaneous water heaters
BS EN 60335-2-35:1998, IEC 60335-2-35:1997. Specification for safety of household and similar electrical appliancesParticular requirements for instantaneous water heaters
BS EN 60335-2-35:2002+A2:2011. Household and similar electrical appliances. SafetyParticular requirements for instantaneous water heaters
BS EN 60335-2-36:1995. Specification for safety of household and similar electrical appliances. Particular requirementsCommercial electric cooking ranges, ovens, hobs and hob elements
BS EN 60335-2-36:2000, IEC 60335-2-36:2000. Specification for safety of household and similar electrical appliancesParticular requirements for commercial electric cooking ranges, ovens, hobs and hob elements
BS EN 60335-2-36:2002+A11:2012. Household and similar electrical appliances. SafetyParticular requirements for commercial electric cooking ranges, ovens, hobs and hob elements
BS EN 60335-2-37:1996, IEC 60335-2-37:1994. Specification for safety of household and similar electrical appliancesParticular requirements
BS EN 60335-2-37:2000, IEC 60335-2-37:2000. Specification for safety of household and similar electrical appliancesParticular requirements for commercial electric deep fat fryers
BS EN 60335-2-37:2002+A11:2012. Household and similar electrical appliances. SafetyParticular requirements for commercial electric deep fat fryers
BS EN 60335-2-38:1996, IEC 60335-2-38:1994. Specification for safety of household and similar electrical appliancesParticular requirements for commercial electric griddles and griddle grills
BS EN 60335-2-38:2000, IEC 60335-2-38:2000. Specification for safety of household and similar electrical appliancesParticular requirements for commercial electric griddles and griddle grills
BS EN 60335-2-38:2003+A1:2008. Household and similar electrical appliances. SafetyParticular requirements for commercial electric griddles and griddle grills
BS EN 60335-2-39:1996, IEC 60335-2-39:1994. Specification for safety of household and similar electrical appliances. Particular requirementsCommercial electric multi-purpose cooking pans
BS EN 60335-2-39:2000, IEC 60335-2-39:2000. Specification for safety of household and similar electrical appliancesParticular requirements for commercial electric multi-purpose cooking pans
BS EN 60335-2-39:2003+A2:2008. Household and similar electrical appliances. SafetyParticular requirements for commercial electric multi-purpose cooking pans
BS EN 60335-2-4:1995, IEC 60335-2-4:1993. Specification for safety of household and similar electrical appliances. Particular requirementsSpin extractors
BS EN 60335-2-4:2002. Household and similar electrical appliances. SafetyParticular requirements for spin extractors
BS EN 60335-2-4:2010. Household and similar electrical appliances. SafetyParticular requirements for spin extractors
BS EN 60335-2-40:1993. Specification for safety of household and similar electrical appliances. Particular requirementsElectric heat pumps, air conditioners and dehumidifiers
BS EN 60335-2-40:1998. Specification for safety of household and similar electrical appliances.Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
BS EN 60335-2-40:2003+A13:2012. Household and similar electrical appliances. SafetyParticular requirements for electrical heat pumps, air-conditioners and dehumidifiers
BS EN 60335-2-41:1996, IEC 60335-2-41:1996. Specification for safety of household and similar electrical appliances. Particular requirementsPumps for liquids having a temperature not exceeding 35°C
BS EN 60335-2-41:2003+A2:2010. Household and similar electrical appliances. SafetyParticular requirements for pumps
BS EN 60335-2-42:1996, IEC 60335-2-42:1994. Specification for safety of household and similar electrical appliances. Particular requirementsCommercial electric forced convection ovens, steam cookers and steam-convection ovens
BS EN 60335-2-42:2000, IEC 60335-2-42:2000. Specification for safety of household and similar electrical appliancesParticular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
BS EN 60335-2-42:2003+A11:2012. Household and similar electrical appliances. SafetyParticular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
BS EN 60335-2-43:1997, IEC 60335-2-43:1995. Specification for safety of household and similar electrical appliances. Particular requirementsClothes dryers and towel rails
BS EN 60335-2-43:2003+A2:2008. Household and similar electrical appliances. SafetyParticular requirements for clothes dryers and towel rails
BS EN 60335-2-44:1991. Specification for safety of household and similar electrical appliances. Particular requirementsElectric ironers
BS EN 60335-2-44:1998. Specification for safety of household and similar electrical appliances. Particular requirementsIroners
BS EN 60335-2-44:2002+A2:2012. Household and similar electrical appliances. SafetyParticular requirements for ironers
BS EN 60335-2-45:1991. Specification for safety of household and similar electrical appliances. Particular requirementsPortable electric heating tools and similar appliances
BS EN 60335-2-45:1997, IEC 60335-2-45:1996. Specification for safety of household and similar electrical appliances. Particular requirementsPortable heating tools and similar appliances
BS EN 60335-2-45:2002+A2:2012. Household and similar electrical appliances. SafetyParticular requirements for portable heating tools and similar appliances
BS EN 60335-2-47:1992. Specification for safety of household and similar electrical appliances. Particular requirementsCommercial electric boiling pans
BS EN 60335-2-47:1997, IEC 60335-2-47:1995. Specification for safety of household and similar electrical appliances. Particular requirementsCommercial electric boiling pans
BS EN 60335-2-47:2000, IEC 60335-2-47:2000. Specification for safety of household and similar electrical appliancesParticular requirements for commercial electric boiling pans
BS EN 60335-2-47:2003+A11:2012. Household and similar electrical appliances. SafetyParticular requirements for commercial electric boiling pans
BS EN 60335-2-48:1992. Specification for safety of household and similar electrical appliances. Particular requirementsCommercial electric grillers and toasters
BS EN 60335-2-48:1997, IEC 60335-2-48:1995. Specification for safety of household and similar electrical appliances. Particular requirementsCommercial electric grillers and toasters
BS EN 60335-2-48:2000, IEC 60335-2-48:2000. Specification for safety of household and similar electrical appliancesParticular requirements for commercial electric grillers and toasters
BS EN 60335-2-48:2003+A11:2012. Household and similar electrical appliances. SafetyParticular requirements for commercial electric grillers and toasters
BS EN 60335-2-49:1992. Specification for safety of household and similar electrical appliances. Particular requirementsCommercial catering electric hot cupboards
BS EN 60335-2-49:1997, IEC 60335-2-49:1995. Specification for safety of household and similar electrical appliances. Particular requirementsCommercial electric hot cupboards
BS EN 60335-2-49:2000, IEC 60335-2-49:2000. Specification for safety of household and similar electrical appliancesParticular requirements for commercial electric hot cupboards
BS EN 60335-2-49:2003+A11:2012. Household and similar electrical appliances. SafetyParticular requirements for commercial electric appliances for keeping food and crockery warm
BS EN 60335-2-5:1996. Safety of household and similar electrical appliancesParticular requirements for dishwashers
BS EN 60335-2-5:2003+A12:2012. Household and similar electrical appliances. SafetyParticular requirements for dishwashers
BS EN 60335-2-50:1992. Specification for safety of household and similar electrical appliances. Particular requirementsCommercial electric bains-marie
BS EN 60335-2-50:1997, IEC 60335-2-50:1995. Specification for safety of household and similar electrical appliances. Particular requirementsCommercial electric bains-marie
BS EN 60335-2-50:2000, IEC 60335-2-50:2000. Specification for safety of household and similar electrical appliancesParticular requirements for commercial electric bains-marie
BS EN 60335-2-50:2003+A1:2008. Household and similar electrical appliances. SafetyParticular requirements for commercial electric bains-marie
BS EN 60335-2-51:1991. Specification for safety of household and similar electrical appliances. Particular requirementsStationary circulation pumps for heating and service water installations
BS EN 60335-2-51:1997, IEC 60335-2-51:1997. Specification for safety of household and similar electrical appliances. Particular requirementsStationary circulation pumps for heating and service water installations
BS EN 60335-2-51:2003+A2:2012. Household and similar electrical appliances. SafetyParticular requirements for stationary circulation pumps for heating and service water installations
BS EN 60335-2-52:1991. Specification for safety of household and similar electrical appliances. Particular requirementsOral hygiene appliances connected to the mains supply through a safety isolating transformer
BS EN 60335-2-52:1996, IEC 60335-2-52:1994. Specification for safety of household and similar electrical appliances. Particular requirementsParticular requirements for oral hygiene appliances
BS EN 60335-2-52:2003+A11:2010. Household and similar electrical appliances. Safety Particular requirements for oral hygiene appliances
BS EN 60335-2-53:1991. Specification for safety of household and similar electrical appliances. Particular requirementsElectric sauna heating appliances
BS EN 60335-2-53:1997, IEC 60335-2-53:1997. Specification for safety of household and similar electrical appliances. Particular requirementsSauna heating appliances
BS EN 60335-2-53:2003. Household and similar electrical appliances. SafetyParticular requirements for sauna heating appliances
BS EN 60335-2-53:2011. Household and similar electrical appliances. SafetyParticular requirements for sauna heating appliances and infrared cabins
BS EN 60335-2-54:1992. Specification for safety of household and similar electrical appliances. Particular requirementsGeneral purpose cleaning appliances
BS EN 60335-2-54:1997, IEC 60335-2-54:1995. Specification for safety of household and similar electrical appliances. Particular requirementsSurface-cleaning appliances employing liquids
BS EN 60335-2-54:2003. Household and similar electrical appliances. SafetyParticular requirements for surface-cleaning appliances for household use employing liquids or steam
BS EN 60335-2-54:2008+A11:2012. Household and similar electrical appliances. Safety Particular requirements for surface-cleaning appliances for household use employing liquids or steam
BS EN 60335-2-55:1993. Specification for safety of household and similar electrical appliances. Particular requirementsElectrical appliances for use with aquariums and garden ponds
BS EN 60335-2-55:1997, IEC 60335-2-55:1997. Specification for safety of household and similar electrical appliances. Particular requirementsElectrical appliances for use with aquariums and garden ponds
BS EN 60335-2-55:2003+A1:2008. Household and similar electrical appliances. SafetyParticular requirements for electrical appliances for use with aquariums and garden ponds
BS EN 60335-2-56:1991. Specification for safety of household and similar electrical appliances. Particular requirementsProjectors and similar appliances
BS EN 60335-2-56:1997, IEC 60335-2-56:1997. Specification for safety of household and similar electrical appliances. Particular requirementsProjectors and similar appliances
BS EN 60335-2-56:2003+A1:2008. Household and similar electrical appliances. SafetyParticular requirements for projectors and similar appliances
BS EN 60335-2-57:1992. Specification for safety of household and similar electrical appliances. Particular requirementsIce-cream appliances with incorporated motor-compressors
BS EN 60335-2-58:1993. Specification for safety of household and similar electrical appliances. Particular requirementsCommercial electric dishwashing machines
BS EN 60335-2-58:1997. Safety of household and similar electrical appliancesParticular requirements
BS EN 60335-2-58:2005+A1:2008. Household and similar electrical appliances. SafetyParticular requirements for commercial electric dishwashing machines
BS EN 60335-2-59:1995. Specification for safety of household and similar electrical appliances. Particular requirementsInsect killers
BS EN 60335-2-59:1998, IEC 60335-2-59:1997. Specification for safety of household and similar electrical appliances. Particular requirementsInsect killers
BS EN 60335-2-59:2003+A2:2009. Household and similar electrical appliances. SafetyParticular requirements for insect killers
BS EN 60335-2-6:1991. Specification for safety of household and similar electrical appliances. Particular requirementsCooking ranges, cooking tables, ovens and similar appliances for household use
BS EN 60335-2-6:1999, IEC 60335-2-6:1997. Specification for safety of household and similar electrical appliances. Particular requirementsCooking ranges, cooking tables, ovens and similar appliances for household use
BS EN 60335-2-6:2003+A13:2013. Household and similar electrical appliances. SafetyParticular requirements for stationary cooking ranges, hobs, ovens and similar appliances
BS EN 60335-2-60:1991. Specification for safety of household and similar electrical appliances. Particular requirementsWhirlpool baths and similar equipment
BS EN 60335-2-60:1998. Specification for safety of household and similar electrical appliances. Particular requirementsWhirlpool baths
BS EN 60335-2-60:2003+A12:2010. Household and similar electrical appliances. SafetyParticular requirements for whirlpool baths and whirlpool spas
BS EN 60335-2-61:1996. Specification for safety of household and similar electrical appliances. Particular requirementsThermal storage room heaters
BS EN 60335-2-61:2003+A2:2008. Household and similar electrical appliances. SafetyParticular requirements for thermal-storage room heaters
BS EN 60335-2-62:1993. Specification for safety of household and similar electrical appliances. Particular requirementsCommercial electric rinsing sinks
BS EN 60335-2-62:1997. Specification for safety of household and similar electrical appliancesParticular requirements for commercial electric rinsing sinks
BS EN 60335-2-62:2003+A1:2008. Household and similar electrical appliances. SafetyParticular requirements for commercial electric rinsing sinks
BS EN 60335-2-63:1993. Specification for safety of household and similar electrical appliances. Particular requirementsCommercial electric water boilers and liquid heaters
BS EN 60335-2-64:1994. Specification for safety of household and similar electrical appliances. Particular requirementsCommercial electric kitchen machines
BS EN 60335-2-64:2000. Specification for safety of household and similar electrical appliancesParticular requirements for commercial electric kitchen machines
BS EN 60335-2-65:1996. Specification for safety of household and similar electrical appliances. Particular requirementsAir-cleaning appliances
BS EN 60335-2-65:2003+A11:2012. Household and similar electrical appliances. Safety Particular requirements for air-cleaning appliances
BS EN 60335-2-66:1996. Specification for safety of household and similar electrical appliances. Particular requirementsWater-bed heaters
BS EN 60335-2-66:2003+A2:2012. Household and similar electrical appliances. SafetyParticular requirements for water-bed heaters
BS EN 60335-2-67:1994, IEC 60335-2-67:1992. Specification for safety of household and similar electrical appliances. Particular requirementsFloor treatment and floor cleaning machines, for industrial and commercial use
BS EN 60335-2-67:1999. Specification for safety of household and similar electrical appliances. Particular requirementsParticular requirements for floor treatment and floor cleaning machines, for industrial and commercial use
BS EN 60335-2-67:2003. Household and similar electrical appliances. SafetyParticular requirements for floor treatment and floor cleaning machines, for industrial and commercial use
BS EN 60335-2-67:2009. Household and similar electrical appliances. SafetyParticular requirements for floor treatment and floor cleaning machines for commercial use
BS EN 60335-2-67:2012. Household and similar electrical appliances. SafetyParticular requirements for floor treatment machines for commercial use
BS EN 60335-2-68:1994, IEC 60335-2-68:1992. Specification for safety of household and similar electrical appliances. Particular requirementsSpray extraction appliances, for industrial and commercial use
BS EN 60335-2-68:1999. Specification for safety of household and similar electrical appliances. Particular requirementsParticular requirements for spray extraction appliances, for industrial and commercial use
BS EN 60335-2-68:2003. Household and similar electrical appliances. SafetyParticular requirements for spray extraction appliances, for industrial and commercial use
BS EN 60335-2-68:2009. Household and similar electrical appliances. SafetyParticular requirements for spray extraction machines for commercial use
BS EN 60335-2-68:2012. Household and similar electrical appliances. SafetyParticular requirements for spray extraction machines, for commercial use
BS EN 60335-2-69:1996. Specification for safety of household and similar electrical appliances. Particular requirementsWet and dry vacuum cleaners, including power brush, for industrial and commercial use
BS EN 60335-2-69:1999. Specification for safety of household and similar electrical appliancesParticular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use
BS EN 60335-2-69:2003+A2:2008. Household and similar electrical appliances. SafetyParticular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use
BS EN 60335-2-69:2009. Household and similar electrical appliances. SafetyParticular requirements for wet and dry vacuum cleaners, including power brush, for commercial use
BS EN 60335-2-69:2012. Household and similar electrical appliances. Safety Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use
BS EN 60335-2-7:1997. Specification for safety of household and similar electrical appliances. Particular requirementsWashing machines
BS EN 60335-2-7:2001. Specification for safety of household and similar electrical appliancesParticular requirements for washing machines
BS EN 60335-2-7:2003+A11:2010. Household and similar electrical appliances. SafetyParticular requirements for washing machines
BS EN 60335-2-7:2010+A1:2013. Household and similar electrical appliances. SafetyParticular requirements for washing machines
BS EN 60335-2-70:1996, IEC 60335-2-70:1993. Specification for safety of household and similar electrical appliancesParticular requirements for milking machines
BS EN 60335-2-70:2002. Household and similar electrical appliances. SafetyParticular requirements for milking machines
BS EN 60335-2-71:1996. Specification for safety of household and similar electrical appliances. Particular requirementsElectrical heating appliances for breeding and rearing animals
BS EN 60335-2-71:2003. Household and similar electrical appliances. SafetyParticular requirements for electrical heating appliances for breeding and rearing animals
BS EN 60335-2-72:1999. Specification for safety of household and similar electrical appliances. Particular requirementsAutomatic machines for floor treatment for commercial and industrial use
BS EN 60335-2-72:2009. Household and similar electrical appliances. SafetyParticular requirements for automatic machines for floor treatment for commercial use
BS EN 60335-2-72:2012. Household and similar electrical appliances. SafetyParticular requirements for floor treatment machines with or without traction drive, for commercial use
BS EN 60335-2-73:1997. Specification for safety of household and similar electrical appliances. Particular requirementsFixed immersion heaters
BS EN 60335-2-73:2003+A2:2009. Household and similar electrical appliances. SafetyParticular requirements for fixed immersion heaters
BS EN 60335-2-74:1996, IEC 60335-2-74:1994. Specification for safety of household and similar electrical appliances. Particular requirementsPortable immersion heaters
BS EN 60335-2-74:2003+A2:2009. Household and similar electrical appliances. SafetyParticular requirements for portable immersion heaters
BS EN 60335-2-75:2002. Specification for safety of household and similar electrical appliances. Particular requirementsParticular requirements for commercial dispensing appliances and vending machines (electric or gas-heated)
BS EN 60335-2-75:2004+A2:2008. Household and similar electrical appliances. SafetyParticular requirements for commercial dispensing appliances and vending machines
BS EN 60335-2-76:1999. Specification for safety of household and similar electrical appliances. Particular requirementsParticular requirements for electric fence energizers
BS EN 60335-2-76:2005+A12:2010. Household and similar electrical appliances. SafetyParticular requirements for electric fence energizers
BS EN 60335-2-77:2001. Specification for safety of household and similar electrical appliancesParticular requirements for pedestrian controlled mains-operated lawn-mowers
BS EN 60335-2-77:2006. Household and similar electrical appliances. SafetyParticular requirements for pedestrian controlled mains-operated lawnmowers
BS EN 60335-2-77:2010. Safety of household and similar appliancesParticular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers
BS EN 60335-2-78:1997, IEC 60335-2-78:1995. Specification for safety of household and similar electrical appliances. Particular requirementsOutdoor barbecues
BS EN 60335-2-78:2003+A1:2008. Household and similar electrical appliances. SafetyParticular requirements for outdoor barbecues
BS EN 60335-2-79:1998. Specification for safety of household and similar electrical appliances. Particular requirementsParticular requirements for high pressure cleaners and steam cleaners for industrial and commercial use
BS EN 60335-2-79:2004. Household and similar electrical appliances. SafetyParticular requirements for high pressure cleaners and steam cleaners
BS EN 60335-2-79:2009. Household and similar electrical appliances. SafetyParticular requirements for high pressure cleaners and steam cleaners
BS EN 60335-2-79:2012. Household and similar electrical appliances. SafetyParticular requirements for high pressure cleaners and steam cleaners
BS EN 60335-2-8:1991. Specification for safety of household and similar electrical appliances. Particular requirementsElectric shavers, hair clippers and similar appliances
BS EN 60335-2-8:1996. Specification for safety of household and similar electrical appliances. Particular requirementsShavers, hair clippers and similar appliances
BS EN 60335-2-8:2003+A2:2008. Household and similar electrical appliances. SafetyParticular requirements for shavers, hair clippers and similar appliances
BS EN 60335-2-80:1997, IEC 60335-2-80:1997. Specification for safety of household and similar electrical appliances. Particular requirementsFans
BS EN 60335-2-80:2003+A2:2009. Household and similar electrical appliances. SafetyParticular requirements for fans
BS EN 60335-2-81:1998. Specification for safety of household and similar electrical appliances. Particular requirementsFoot warmers and heating mats
BS EN 60335-2-81:2003+A2:2012. Household and similar electrical appliances. SafetyParticular requirements for foot warmers and heating mats
BS EN 60335-2-82:2000, IEC 60335-2-82:1999. Specification for safety of household and similar electrical appliancesParticular requirements for service machines and amusement machines
BS EN 60335-2-82:2003+A1:2008. Household and similar electric appliances. SafetyParticular requirements for amusement machines and personal service machines
BS EN 60335-2-83:2002+A1:2008. Household and similar electrical appliances. SafetyParticular requirements for heated gullies for roof drainage
BS EN 60335-2-84:1999, IEC 60335-2-84:1999. Specification for safety of household and similar electrical appliancesParticular requirements for toilets
BS EN 60335-2-84:2003+A1:2008. Household and similar electrical appliances. SafetyParticular requirements for toilets
BS EN 60335-2-85:1998, IEC 60335-2-85:1997. Specification for safety of household and similar electrical appliancesParticular requirements for fabric steamers
BS EN 60335-2-85:2003+A1:2008. Household and similar electrical appliances. SafetyParticular requirements for fabric steamers
BS EN 60335-2-86:2001. Specification for safety of household and similar electrical appliancesParticular requirements for electric fishing machines
BS EN 60335-2-86:2003. Specification for safety of household and similar electrical appliancesParticular requirements for electric fishing machines
BS EN 60335-2-87:1999, IEC 60335-2-87:1998. Specification for safety of household and similar electrical appliances. Particular requirementsParticular requirements for electric animal-stunning equipment
BS EN 60335-2-87:2002+A1:2007. Household and similar electrical appliances. SafetyParticular requirements for electrical animal-stunning equipment
BS EN 60335-2-88:1997, IEC 60335-2-88:1997. Specification for safety of household and similar electrical appliances. Particular requirementsHumidifiers intended for use with heating, ventilation, or air-conditioning systems
BS EN 60335-2-88:2002. Specification for safety of household and similar electrical appliances. Particular requirementsParticular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems
BS EN 60335-2-89:2002+A2:2007. Household and similar electrical appliances. SafetyParticular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor
BS EN 60335-2-89:2010. Household and similar electrical appliances. SafetyParticular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor
BS EN 60335-2-9:1991. Specification for safety of household and similar electrical appliances. Particular requirementsToasters, grills, roasters and similar appliances
BS EN 60335-2-9:1996. Specification for safety of household and similar electrical appliances. Particular requirementsToasters, grills, roasters and similar appliances
BS EN 60335-2-9:2003+A13:2010. Household and similar electrical appliances. SafetyParticular requirements for grills, toasters and similar portable cooking appliances
BS EN 60335-2-90:1998, IEC 60335-2-90:1997. Specification for safety of household and similar electrical appliances. Particular requirementsCommercial microwave ovens
BS EN 60335-2-90:2002. Specification for safety of household and similar electrical appliancesParticular requirements for commercial microwave ovens
BS EN 60335-2-90:2006+A1:2010. Household and similar electrical appliances. SafetyParticular requirements for commercial microwave ovens
BS EN 60335-2-91:2003. Specification for safety of household and similar electrical appliancesParticular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers
BS EN 60335-2-92:2005. Household and similar electrical appliances. SafetyParticular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators
BS EN 60335-2-95:2001. Specification for safety of household and similar electrical appliances. Particular requirementsParticular requirements for drives for vertically moving garage doors for residential use
BS EN 60335-2-95:2004. Household and similar electrical appliances. Safety
BS EN 60335-2-96:2002+A2:2009. Household and similar electrical appliances. SafetyParticular requirements for flexible sheet heating elements for room heating
BS EN 60335-2-97:2001. Safety of household and similar electrical appliancesParticular requirements for drives for rolling shutters, awnings, blinds and similar equipment
BS EN 60335-2-97:2006+A2:2010. Household and similar electrical appliances. SafetyParticular requirements for drives for rolling shutters, awnings, blinds and similar equipment
BS EN 60335-2-98:1997, IEC 60335-2-98:1997. Specification for safety of household and similar electrical appliances. Particular requirementsHumidifiers
BS EN 60335-2-98:2003+A2:2008. Household and similar electrical appliances. SafetyParticular requirements for humidifiers
BS EN 60335-2-99:2003. Specification for safety of household and similar electrical appliancesParticular requirements for commercial electric hoods
BS EN 60336:1995, IEC 60336:1993. X-ray tube assemblies for medical diagnosis. Characteristics of focal spots
BS EN 60336:2005. Medical electrical equipment. X-ray tube assemblies for medical diagnosis. Characteristics of focal spots
BS EN 60343:1993, IEC 60343:1991. Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
BS EN 60349-1:2000, IEC 60349-1:1999. Railway applications. Rotating electrical machines for rail and road vehiclesMachines other than electronic convertor-fed alternating current motors
BS EN 60349-1:2010. Electric traction. Rotating electrical machines for rail and road vehiclesMachines other than electronic converter-fed alternating current motors
BS EN 60349-2:2001. Railway applications. Rotating electrical machines for rail and road vehiclesElectronic convertor-fed alternating current motors
BS EN 60349-2:2010. Electrical traction. Rotating electrical machines for rail and road vehiclesElectronic converter-fed alternating current motors
BS EN 60349-4:2013. Electric traction. Rotating electrical machines for rail and road vehicles Permanent magnet synchronous electrical machines connected to an electronic converter
BS EN 60350:1999 (text).
BS EN 60350:1999, IEC 60350:1999. Electric cooking ranges, hobs, ovens and grills for household use. Methods for measuring performance
BS EN 60350:1999. Electric cooking ranges, hobs, ovens and grills for household use. Methods for measuring performance
BS EN 60352-1:1997. Solderless connectionsGeneral requirements, test methods and practical guidance
BS EN 60352-1:1998, IEC 60352-1:1997. Solderless connectionsWrapped connections. General requirements, test methods and practical guidance
BS EN 60352-2:1997, IEC 60352-2:1990. Solderless connectionsSolderless crimped connections. General requirements, test methods and practical guidance
BS EN 60352-2:2006+A1:2013. Solderless connectionsCrimped connections. General requirements, test methods and practical guidance
BS EN 60352-3:1995, IEC 60352-3:1993. Solderless connectionsSolderless accessible insulation displacement connections. General requirements, test methods and practical guidance
BS EN 60352-4:1995, IEC 60352-4:1994. Solderless connectionsSolderless non-accessible insulation displacement connections. General requirements, test methods and practical guidance
BS EN 60352-5:1995, IEC 60352-5:1995. Solderless connectionsSolderless press-in connections. General requirements, test methods and practical guidance
BS EN 60352-5:2001, IEC 60352-5:2001. Solderless connectionsPress-in connections. General requirements, test methods and practical guidance
BS EN 60352-5:2008. Solderless connectionsPress-in connections. General requirements, test methods and practical guidance
BS EN 60352-5:2012. Solderless connectionsPress-in connections. General requirements, test methods and practical guidance
BS EN 60352-6:1998, IEC 60352-6:1997. Solderless connectionsSolderless insulation piercing connections. General requirements, test methods and practical guidance
BS EN 60352-7:2002. Solderless connectionsSpring clamp connections. General requirements, test methods and practical guidance
BS EN 60352-8:2011. Solderless connectionsCompression mount connections. General requirements, test methods and practical guidance
BS EN 60357:2003+A3:2011. Tungsten halogen lamps (non-vehicle). Performance specifications
BS EN 60358-1:2012. Coupling capacitors and capacitor dividersGeneral rules
BS EN 60359:2002, IEC 60359:2001. Electrical and electronic measurement equipment. Expression of performance
BS EN 60360:1999, IEC 60360:1998. Standard method of measurement of lamp cap temperature rise
BS EN 60368-1:2000, IEC 60368-1:2000. Piezoelectric filtersGeneric specification
BS EN 60368-2-2:1999, IEC 60368-2-2:1996. Piezoelectric filters. Guide to the use of piezoelectric filtersPiezoelectric ceramic filters
BS EN 60368-3:2002, IEC 60368-3:2001. Piezoelectric filtersStandard outlines and lead connections
BS EN 60368-3:2010. Piezoelectric filters of assessed qualityStandard outlines and lead connections
BS EN 60368-4:2001, IEC 60368-4:2000. Piezoelectric filtersSectional specification. Capability approval
BS EN 60368-4-1:2001, IEC 60368-4-1:2000. Piezoelectric filters. Blank detail specification.Capability approval
BS EN 60371-1:1995, IEC 60371-1:1980. Specification for insulating materials based on micaDefinitions and general requirements
BS EN 60371-1:2003. Specification for insulating materials based on micaDefinitions and general requirements
BS EN 60371-2:1997, IEC 60371-2:1987. Specification for insulating materials based on micaMethods of test
BS EN 60371-2:2004. Specification for insulating materials based on micaMethods of test
BS EN 60371-3-1:1995, IEC 60371-3-1:1984. Specification for insulating materials based on mica. Specifications for individual materialsCommutator separators and materials
BS EN 60371-3-1:2006. Specification for insulating materials based on micaSpecifications for individual materials
BS EN 60371-3-2:1995, IEC 60371-3-2:1991. Specification for insulating materials based on mica. Specifications for individual materialsMica paper
BS EN 60371-3-2:2006. Insulating materials based on micaSpecifications for individual materials
BS EN 60371-3-3:1995, IEC 60371-3-3:1983. Specification for insulating materials based on mica. Specifications for individual materialsSpecification for rigid mica materials for heating equipment
BS EN 60371-3-4:1996, IEC 60371-3-4:1992. Specification for insulating materials based on micaSpecifications for individual materials
BS EN 60371-3-5:1996, IEC 60371-3-5:1992. Specification for insulating materials based on mica. Specifications for individual materialsGlass-backed mica paper with an epoxy resin binder for post-impregnation (VPI)
BS EN 60371-3-5:2006. Insulating materials based on micaSpecifications for individual materials
BS EN 60371-3-6:1996, IEC 60371-3-6:1992. Specification for insulating materials based on micaSpecifications for individual materials
BS EN 60371-3-7:1996, IEC 60371-3-7:1995. Specification for insulating materials based on micaSpecifications for individual materials
BS EN 60371-3-8:1996, IEC 60371-3-8:1995. Insulating materials based on micaSpecifications for individual materials
BS EN 60371-3-9:1996, IEC 60371-3-9:1995. Insulating materials based on micaSpecifications for individual materials
BS EN 60372:2004. Locking devices for ball and socket couplings of string insulator units. Dimensions and tests
BS EN 60375:2003. Conventions concerning electric and magnetic circuits
BS EN 60376:2005. Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment
BS EN 60379:2004. Methods for measuring the performance of electric storage water-heaters for household purposes
BS EN 60382:1993, IEC 60382:1991. Analogue pneumatic signal for process control systems
BS EN 60383-1:1998. Insulators for overhead lines with a nominal voltage above 1000 VCeramic or glass insulator units for a.c. systems. Definitions, test methods and acceptance criteria
BS EN 60383-2:1995. Insulators for overhead lines with a nominal voltage above 1000 VInsulator strings and insulator sets for a.c. systems. Definitions, test methods and acceptance criteria
BS EN 60384-1:2001. Fixed capacitors for use in electronic equipmentGeneric specification
BS EN 60384-1:2009. Fixed capacitors for use in electronic equipmentGeneric specification
BS EN 60384-11:2008. Fixed capacitors for use in electronic equipmentSectional specification. Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors
BS EN 60384-11-1:2008. Fixed capacitors for use in electronic equipmentBlank detail specification. Fixed polyethylene- terephthalate film dielectric metal foil d.c. capacitors. Assessment level EZ
BS EN 60384-13:2006. Fixed capacitors for use in electronic equipmentSectional specification. Fixed polypropylene film dielectric metal foil d.c. capacitors
BS EN 60384-13:2012. Fixed capacitors for use in electronic equipmentSectional specification/ Fixed polypropylene film dielectric metal foil d.c. capacitors
BS EN 60384-13-1:2006. Fixed capacitors for use in electronic equipment Blank detail specification. Fixed polypropylene film dielectric metal foil d.c. capacitors. Assessment level E and EZ
BS EN 60384-14:2005. Fixed capacitors for use in electronic equipmentSectional specification. Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
BS EN 60384-14:2013. Fixed capacitors for use in electronic equipmentSectional specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
BS EN 60384-14-1:2005. Fixed capacitors for use in electronic equipmentBlank detail specification
BS EN 60384-14-2:2004. Fixed capacitors for use in electronic equipmentBlank detail specification. Fixed capacitors for electromagnetic interference suppression and connection to the supply mains. Safety tests only
BS EN 60384-14-3:2004. Fixed capacitors for use in electronic equipmentBlank detail specification. Fixed capacitors for electromagnetic interference suppression and connection to the supply mains. Assessment level DZ
BS EN 60384-16:2005. Fixed capacitors for use in electronic equipmentSectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors
BS EN 60384-16-1:2005. Fixed capacitors for use in electronic equipmentBlank detail specification: fixed metallized polypropylene film dielectric d.c. capacitors. Assessment levels E and EZ
BS EN 60384-17:2005. Fixed capacitors for use in electronic equipmentSectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors
BS EN 60384-17-1:2005. Fixed capacitors for use in electronic equipmentBlank detail specification. Fixed metallized polypropylene film d ielectric a.c. and pulse capacitors. Assessment levels E and EZ
BS EN 60384-18:2007. Fixed capacitors for use in electronic equipmentSectional specification. Fixed aluminium electrolytic surface mount capacitors with solid (Mn02) and non- solid electrolyte
BS EN 60384-18-1:2007. Fixed capacitors for use in electronic equipmentBlank detail specification. Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) electrolyte. Assessment level EZ
BS EN 60384-18-2:2007. Fixed capacitors for use in electronic equipmentBlank detail specification. Fixed aluminium electrolytic surface mount capacitors with non-solid electrolyte. Assessment level EZ
BS EN 60384-19:2006. Fixed capacitors for use in electronic equipmentSectional specification. Fixed metallized polyethylene- terephthalate film dielectric surface mount d.c. capacitors
BS EN 60384-19-1:2006. Fixed capacitors for use in electronic equipmentBlank detail specification. Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors. Assessment level EZ
BS EN 60384-2:2005. Fixed capacitors for use in electronic equipmentSectional specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors
BS EN 60384-2:2012. Fixed capacitors for use in electronic equipmentSectional specification. Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
BS EN 60384-20:1999, IEC 60384-20:1996. Fixed capacitors for use in electronic equipmentSectional specification: fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors
BS EN 60384-20:1999. Fixed capacitors for use in electronic equipmentSectional specification. Fixed metallized polyphenylene sulfide film dielectric surface mount d.c.
BS EN 60384-20:2008. Fixed capacitors for use in electronic equipmentSectional specification. Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors
BS EN 60384-20-1:1999, IEC 60384-20-1:1996. Fixed capacitors for use in electronic equipmentBlank detail specification: fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors. Assessment level EZ
BS EN 60384-20-1:1999. Fixed capacitors for use in electronic equipmentBlank detail specification: fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors. Assessment level EZ
BS EN 60384-20-1:2008. Fixed capacitors for use in electronic equipmentBlank detail specification. Fixed metalized polyphenylene sulfide film dielectric surface mount d.c. capacitors. Assessment level EZ
BS EN 60384-21:2004. Fixed capacitors for use in electronic equipmentSectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1
BS EN 60384-2-1:2005. Fixed capacitors for use in electronic equipmentBlank detail specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors. Assessment levels E and EZ
BS EN 60384-21:2012. Fixed capacitors for use in electronic equipmentSectional specification. Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1
BS EN 60384-21-1:2004. Fixed capacitors for use in electronic equipmentBlank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1. Assessment level EZ
BS EN 60384-22:2004. Fixed capacitors for use in electronic equipmentSectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
BS EN 60384-22:2012. Fixed capacitors for use in electronic equipmentSectional specification. Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
BS EN 60384-22-1:2004. Fixed capacitors for use in electronic equipmentBlank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2. Assessment level EZ
BS EN 60384-23:2005. Fixed capacitors for use in electronic equipmentSectional specification. Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors
BS EN 60384-23-1:2005. Fixed capacitors for use in electronic equipmentBlank detail specification. Fixed metallized polyethylene naphthalate film dielectric chip d.c. capacitors. Assessment level EZ
BS EN 60384-24:2006. Fixed capacitors for use in electronic equipmentSectional specification. Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte
BS EN 60384-24-1:2006. Fixed capacitors for use in electronic equipmentBlank detail specification. Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte. Assessment level EZ
BS EN 60384-25:2006. Fixed capacitors for use in electronic equipmentSectional specification. Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
BS EN 60384-25-1:2006. Fixed capacitors for use in electronic equipmentBlank detail specification. Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte. Assessment level EZ
BS EN 60384-26:2010. Fixed capacitors for use in electronic equipmentSectional specification. Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
BS EN 60384-26-1:2010. Fixed capacitors for use in electronic equipmentBlank detail specification. Fixed aluminum electrolytic capacitors with conductive polymer solid electrolyte. Assessment level EZ
BS EN 60384-3:2006. Fixed capacitors for use in electronic equipmentSectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte
BS EN 60384-3-1:2006. Fixed capacitors for use in electronic equipmentBlank detail specification: surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte. Assessment level EZ
BS EN 60384-4-1:2007. Fixed capacitors for use in electronic equipmentBlank detail specification. Fixed aluminium electrolytic capacitors with non-solid electrolyte. Assessment level EZ
BS EN 60384-4-2:2007. Fixed capacitors for use in electronic equipmentBlank detail specification. Fixed aluminium electrolytic capacitors with solid (MnO2) electrolyte. Assessment level EZ
BS EN 60384-6:2005. Fixed capacitors for use in electronic equipmentSectional specification. Fixed metallized polycarbonate film dielectric d.c. capacitors
BS EN 60384-6-1:2005. Fixed capacitors for use in electronic equipmentBlank detail specification. Fixed metallized polycarbonate film dielectric d.c. capacitors. Assessment level E
BS EN 60384-8:2005. Fixed capacitors for use in electronic equipmentSectional specification: Fixed capacitors of ceramic dielectric, Class 1
BS EN 60384-8-1:2005. Fixed capacitors for use in electronic equipmentBlank detail specification. Fixed capacitors of ceramic dielectric, Class 1. Assessment level EZ
BS EN 60384-9:2005. Fixed capacitors for use in electronic equipmentSectional specification: fixed capacitors of ceramic dielectric, Class 2
BS EN 60384-9-1:2005. Fixed capacitors for use in electronic equipmentBlank detail specification. Fixed capacitors of ceramic dielectric, Class 2. Assessment level EZ
BS EN 60387:1993, IEC 60387:1992. Specification for symbols for alternating-current electricity meters
BS EN 60393-1:2009. Potentiometers for use in electronic equipmentGeneric specification
BS EN 60398:1999, IEC 60398:1999. Industrial electroheating installations. General test methods
BS EN 60399:1994. Standard sheets for barrel thread for E14 and E27 lampholders with shade holder ring
BS EN 60399:2004+A1:2008. Barrel thread for lampholders with shade holder ring
BS EN 60400:1992. Specification for lampholders for tubular fluorescent lamps and starterholders
BS EN 60400:1996. Specification for lampholders for tubular fluorescent lamps and starterholders
BS EN 60400:2000, IEC 60400:1999. Lampholders for tubular fluorescent lamps and starterholders
BS EN 60400:2008+A1:2011. Lampholders for tubular fluorescent lamps and starterholders
BS EN 60401-1:2005. Terms and nomenclature for cores made of magnetically soft ferritesTerms used for physical irregularities
BS EN 60401-2:2003. Terms and nomenclature for cores made of magnetically soft ferritesReference of dimensions
BS EN 60401-2:2010. Terms and nomenclature for cores made of magnetically soft ferriteReference of dimensions
BS EN 60401-3:2003. Terms and nomenclature for cores made of magnetically soft ferritesGuidelines on the format of data appearing in manufacturers' catalogues of transformer and inductor cores
BS EN 60404-11:2013. Magnetic materialsMethod of test for the determination of surface insulation resistance of magnetic sheet and strip
BS EN 60404-13:2007. Magnetic materialsMethods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
BS EN 60404-14:2002. Magnetic materialsMethods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method
BS EN 60404-15:2012. Magnetic materialsMethods for the determination of the relative magnetic permeability of feebly magnetic materials
BS EN 60404-2:1998+A1:2008. Magnetic materialsMethods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame
BS EN 60404-4:1997+A2:2008. Magnetic materialsMethods of measurement of d.c. magnetic properties of magnetically soft materials
BS EN 60404-5:2007. Magnetic materialsPermanent magnet (magnetically hard) materials. Methods of measurement of magnetic properties
BS EN 60404-6:2003. Magnetic materialsMethods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens
BS EN 60404-8-6:2009. Magnetic materialsSpecifications for individual materials. Soft magnetic metallic materials
BS EN 60405:2007. Nuclear instrumentation. Constructional requirements and classification of radiometric gauges
BS EN 60406:1997, IEC 60406:1997. Specification for radiographic cassettes and mammographic cassettes used for medical X-ray diagnosis
BS EN 604-1:1997. Aluminium and aluminium alloys. Cast forging stockTechnical conditions for inspection and delivery
BS EN 60417-1:1999, IEC 60417-1:1998. Graphical symbols for use on equipmentOverview and application
BS EN 60417-2:1999, IEC 60417-2:1998
BS EN 60417-2:1999, IEC 60417-2:1998. Graphical symbols for use on equipmentSymbol originals
BS EN 60417-2:1999. BS EN 60417-2 Graphical symbols for use on equipmentSymbol originals
BS EN 604-2:1997. Aluminium and aluminium alloys. Cast forging stockTolerances on dimensions and form
BS EN 60420:1993, IEC 60420:1990. Specification for high-voltage alternating current switch-fuse combinations
BS EN 60422:2006. Mineral insulating oils in electrical equipment. Supervision and maintenance guidance
BS EN 60422:2013. Mineral insulating oils in electrical equipment. Supervision and maintenance guidance
BS EN 60423:1995. Conduits for electrical purposes. Outside diameters of conduits for electrical installations and threads for conduits and fittings
BS EN 60423:2007. Conduit systems for cable management. Outside diameters of conduits for electrical installations and threads for conduits and fittings
BS EN 60424-1:2000, IEC 60424-1:1999. Guidance of the limits of surface irregularities of ferrite coresGeneral specification
BS EN 60424-2:1998, IEC 60424-2:1997. Guidance of the limits of surface irregularities of ferrite coresRM-cores
BS EN 60424-3:1999, IEC 60424-3:1999. Guidance of the limits of surface irregularities of ferrite coresETD-cores and E-cores
BS EN 60424-4:2001. Guidance of the limits of surface irregularities of ferrite coresRing cores
BS EN 60424-5:2009. Ferrite cores. Guide on the limits of surface irregularitiesPlanar-cores
BS EN 60426:2007. Electrical insulating materials. Determination of electrolytic corrosion caused by insuating materials. Test methods
BS EN 60427:1992, IEC 60427:1989. Specification for synthetic testing of high-voltage alternating current circuit-breakers
BS EN 60427:2001, IEC 60427:2000. Synthetic testing of high-voltage alternating current circuit-breakers
BS EN 60431:1997. Specification for dimensions of square cores (RM-cores) made of magnetic oxides and associated parts
BS EN 60432-1:1995. Safety specification for incandescent lampsTungsten filament lamps for domestic and similar general lighting purposes
BS EN 60432-1:2000+A2:2012. Incandescent lamps. Safety specificationsTungsten filament lamps for domestic and similar general lighting purposes
BS EN 60432-2:1995. Safety specification for incandescent lampsTungsten halogen lamps for domestic and similar general lighting purposes
BS EN 60432-2:2000+A2:2012. Incandescent lamps. Safety specificationsTungsten halogen lamps for domestic and similar general lighting purposes
BS EN 60432-3:2003+A2:2008. Incandescent lamps. Safety specificationsTungsten-halogen lamps (non-vehicle)
BS EN 60432-3:2013. Incandescent lamps. Safety specificationsTungsten-halogen lamps (non-vehicle)
BS EN 60433:1999, IEC 60433:1998. Insulators for overhead lines with a nominal voltage above 1 kV. Ceramic insulators with a.c. systems. Characteristics of insulator units of the long rod type
BS EN 60436:2008+A11:2012, BS EN 50242:2008. Electric dishwashers for household use. Methods for measuring the performance
BS EN 60437:1998, IEC 60437:1997. Radio interference test on high-voltage insulators
BS EN 60439-1:1994, IEC 60439-1:1992. Specification for low-voltage switchgear and controlgear assembliesSpecification for type-tested and partially type-tested assemblies
BS EN 60439-1:1999, IEC 60439-1:1999. Low-voltage switchgear and controlgear assembliesType-tested and partially type-tested assemblies
BS EN 60439-2:1993. Specification for low-voltage switchgear and controlgear assembliesParticular requirements for busbar trunking systems (busways)
BS EN 60439-2:2000, IEC 60439-2:2000. Low voltage switchgear and controlgear assembliesParticular requirements for busbar trunking systems (busways)
BS EN 60439-3:1991+A2:2001. Low-voltage switchgear and controlgear assembliesParticular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access to their use. Distribution boards
BS EN 60439-4:1991. Specification for low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for construction sites (ACS)
BS EN 60439-4:2004. Low-voltage switchgear and controlgear assembliesParticular requirements for assemblies for construction sites (ACS)
BS EN 60439-5:1996, IEC 60439-5:1996. Specification for low-voltage switchgear and controlgear assembliesParticular requirements for assemblies intended to be installed outdoors in public places. Cable distribution cabinets (CDCs) for power distribution in networks
BS EN 60439-5:2006. Low-voltage switchgear and controlgear assembliesParticular requirements for assemblies for power distribution in public networks
BS EN 60440:2012. Method of measurement of non-linearity in resistors
BS EN 60442:1999, IEC 60442:1998. Electric toasters for household and similar purposes. Methods for measuring the performance
BS EN 60444-1:1997, IEC 60444-1:1986. Measurement of quartz crystal unit parametersBasic method for the measurement of resonance frequency and resonance resistance of quartz crystal units by zero phase technique in a π-network
BS EN 60444-11:2010. Measurement of quartz crystal unit parametersStandard method for the determination of the load resonance frequency ƒL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction
BS EN 60444-2:1997, IEC 60444-2:1980. Measurement of quartz crystal unit parametersPhase offset method for measurement of motional capacitance of quartz crystal units
BS EN 60444-4:1997, IEC 60444-4:1988
BS EN 60444-5:1997, IEC 60444-5:1995. Measurement of quartz crystal unit parametersMethods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction
BS EN 60444-6:1997, IEC 60444-6:1995. Measurement of quartz crystal unit parametersMeasurement of drive level dependence (DLD)
BS EN 60444-7:2004. Measurement of quartz crystal unit parametersMeasurement of activity and frequency dips of quartz crystal units
BS EN 60444-8:2003. Measurement of quartz crystal unit parametersTest fixture for surface mounted quartz crystal units
BS EN 60444-9:2007. Measurement of quartz crystal unit parametersMeasurement of spurious resonances of piezoelectric crystal units
BS EN 60445:2000, IEC 60445:1999. Basic and safety principles for man-machine interface, marking and identification. Identification of equipment terminals and of terminations of certain designated conductors, including general rules for an alphanumeric system
BS EN 60445:2007. Basic and safety principles for man-machine interface, marking and identification. Identification of equipment terminals and conductor terminations
BS EN 60445:2010. Basic and safety principles for man-machine interface, marking and identification. Identification of equipment terminals, conductor terminations and conductors
BS EN 60446:2000, IEC 60446:1999. Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours or numerals
BS EN 60446:2007. Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours or alphanumerics
BS EN 60447:1994, IEC 60447:1993. Man-machine interface (MMI). Actuating principles
BS EN 60450:2004. Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
BS EN 60454-1:1995, IEC 60454-1:1992. Specifications for pressure-sensitive adhesive tapes for electrical purposes.General requirements
BS EN 60454-2:1995, IEC 60454-2:1994. Specifications for pressure-sensitive adhesive tapes for electrical purposes.Methods of test
BS EN 60454-2:2007. Pressure-sensitive adhesive tapes for electrical purposesMethods of test
BS EN 60454-3-1:1998, IEC 60454-3-1:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materialsPVC film tapes with pressure-sensitive adhesive
BS EN 60454-3-10:1996, IEC 60454-3-10:1995. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materialsRequirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive
BS EN 60454-3-11:1998, IEC 60454-3-11:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materialsCombination tapes made of creped cellulosic paper and polyethylene terephthalate film with rubber thermosetting adhesive
BS EN 60454-3-11:2007. Pressure-sensitive adhesive tapes for electrical purposesSpecifications for individual materials
BS EN 60454-3-12:1998, IEC 60454-3-12:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materialsPolyethylene film tapes with pressure-sensitive adhesive
BS EN 60454-3-12:2006. Pressure-sensitive adhesive tapes for electrical purposesSpecifications for individual materials
BS EN 60454-3-13:1996, IEC 60454-3-13:1995. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materialsRequirements for combined cellulose-viscose woven fabric tapes, one side covered with a thermoplastic material, the other side with rubber thermosetting adhesive
BS EN 60454-3-14:2002, IEC 60454-3-14:2001. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materialsPolytetrafluoroethylene film tapes with pressure-sensitive adhesive.
BS EN 60454-3-15:2002, IEC 60454-3-15:2001. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materialsPolyester film/polyester non-woven combinations with rubber thermosetting adhesive
BS EN 60454-3-16:2003. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materialsPolyester film/glass filament combinations with pressure-sensitive adhesive
BS EN 60454-3-17:2002, IEC 60454-3-17:2001. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materialsPolyester/epoxy combinations with pressure-sensitive adhesive
BS EN 60454-3-18:2003. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials
BS EN 60454-3-19:2003. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materialsTapes made from various backing materials with pressure-sensitive adhesive on both sides
BS EN 60454-3-2:1998, IEC 60454-3-2:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materialsPolyester film tapes with rubber thermosetting or acrylic crosslinked adhesives
BS EN 60454-3-2:2006. Pressure-sensitive adhesive tapes for electrical purposesSpecifications for individual materials
BS EN 60454-3-3:1998, IEC 60454-3-3:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materialsPolyester film tapes with rubber thermoplastic adhesive
BS EN 60454-3-4:1998, IEC 60454-3-4:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materialsCellulosic paper, creped, with rubber thermosetting adhesive
BS EN 60454-3-4:2007. Pressure-sensitive adhesive tapes for electrical purposesSpecifications for individual materials
BS EN 60454-3-5:1998, IEC 60454-3-5:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materialsCellulosic paper, non-creped, with rubber thermosetting adhesive
BS EN 60454-3-6:1998, IEC 60454-3-6:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materialsPolycarbonate film tapes with acrylic thermoplastic adhesive
BS EN 60454-3-7:1998, IEC 60454-3-7:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materialsPolyimide film tapes with pressure-sensitive adhesive
BS EN 60454-3-8:1998, IEC 60454-3-8:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materialsGlass fabric with pressure-sensitive adhesive
BS EN 60454-3-8:2006. Pressure-sensitive adhesive tapes for electrical purposesSpecifications for individual materials
BS EN 60454-3-9:1998, IEC 60454-3-9:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materialsCellulose acetate woven fabric tapes with rubber thermosetting adhesive
BS EN 60455-1:1998, IEC 60455-1:1998. Resin based reactive compounds used for electrical insulationDefinitions and general requirements
BS EN 60455-2:1999, IEC 60455-2:1998. Resin based reactive compounds used for electrical insulationMethods of test
BS EN 60455-3-1:2003. Resin based reactive compounds used for electrical insulation. Specifications for individual materialsUnfilled epoxy resinous compounds
BS EN 60455-3-2:2003. Resin based reactive compounds used for electrical insulation. Specifications for individual materialsQuartz filled epoxy resinous compounds
BS EN 60455-3-3:2003. Resin based reactive compounds used for electrical insulation. Specifications for individual materialsUnfilled polyurethane compounds
BS EN 60455-3-4:2003. Resin based reactive compounds used for electrical insulation. Specifications for individual materialsFilled polyurethane compounds
BS EN 60455-3-5:2002, IEC 60455-3-5:2001. Resin based reactive compounds used for electrical insulation. Specifications for individual materialsUnsaturated polyester based impregnating resins
BS EN 60455-3-5:2006. Resin based reactive compounds used for electrical insulationSpecifications for individual materials
BS EN 60455-3-8:2013. Resin based reactive compounds used for electrical insulationSpecifications for individual materials. Sheet 8: Resins for cable accessories
BS EN 60456:1995, IEC 60456:1994. Electric clothes washing machines for household use. Methods for measuring the performance
BS EN 60456:1999. Clothes washing machines for household use. Methods for measuring the performance
BS EN 60456:2005. Clothes washing machines for household use. Methods for measuring the performance
BS EN 60456:2011. Clothes washing machines for household use. Methods for measuring the performance
BS EN 60461:2001. Time and control code for video tape recorders
BS EN 60461:2011. Time and control code
BS EN 60464-1:1999, IEC 60464-1:1998. Varnishes used for electrical insulationDefinitions and general requirements
BS EN 60464-2:2001, IEC 60464-2:2001. Varnishes used for electrical insulationMethods of test
BS EN 60464-3-1:2002, IEC 60464-3-1:2001. Varnishes used for electrical insulationSpecifications for individual materials
BS EN 60464-3-2:2002, IEC 60464-3-2:2001. Varnishes used for electrical insulation
BS EN 60465:1992, IEC 60465:1988. Specification for unused insulating mineral oils for cables with oil ducts
BS EN 60469:2013. Transitions, pulses and related waveforms. Terms, definitions and algorithms
BS EN 60470:2001, IEC 60470:2000. High-voltage alternating current contactors and contactor-based motor starters
BS EN 60475:2011. Method of sampling insulating liquids
BS EN 60477:1999. Laboratory d.c. resistors
BS EN 60477-2:1999. Laboratory resistorsLaboratory a.c. resistors
BS EN 6049-002:2010. Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibresGeneral and list of product standards
BS EN 6049-003:2009. Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibresBraided, tubular, expandable. Product standard
BS EN 6049-006:2012. Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres Self-wrapping protective sleeve, flexible post installation. Product standard
BS EN 6049-007:2012. Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibresSelf-wrapping protective sleeve, flexible post installation operating temperature from 55 °C to 260 °C. Product standard
BS EN 6049-008:2013. Aerospace series. Electrical cables, installation. Protective sleeves in meta-aramid fibresSelf-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from -55°C to 200°C. Product standard
BS EN 60491:1997. Safety requirements for electronic flash apparatus for photographic purposes
BS EN 60495:1994, IEC 60495:1993. Single sideband power-line carrier terminals
BS EN 605:1992. Paints and varnishes. Standard panels for testing
BS EN 60503:1998, IEC 60503:1998. Spools for broadcast videotape recorders (VTRS)
BS EN 60505:2000, IEC 60505:1999. Evaluation and qualification of electrical insulation systems
BS EN 60505:2004. Evaluation and qualification of electrical insulation systems
BS EN 60505:2011. Evaluation and qualification of electrical insulation systems
BS EN 60507:1993, IEC 60507:1991. Artificial pollution tests on high-voltage insulators to be used on a.c. systems
BS EN 60510-2-5:1996, IEC 60510-2-5:1992. Methods of measurement for radio equipment used in satellite earth stations. Measurements for sub-systemsFrequency modulators
BS EN 60510-2-6:1996, IEC 60510-2-6:1992. Methods of measurement for radio equipment used in satellite earth stations. Measurements for sub-systemsFrequency demodulators
BS EN 60510-3-4:1996, IEC 60510-3-4:1992. Methods of measurement for radio equipment used in satellite earth stations. Methods of measurement on combinations of sub-systemsMeasurements for frequency division multiplex (f.d.m.) transmission
BS EN 60512-1:1995, IEC 60512-1:1994. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods.General
BS EN 60512-1:2001, IEC 60512-1:2001. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods.General
BS EN 60512-10-4:1997, IEC 60512-10-4:1996. Connectors for electronic equipment. Tests and measurements. Impact tests (free components), static load tests (fixed components), endurance tests and overload testsTest 10d. Electrical overload (connectors)
BS EN 60512-10-4:2003. Connectors for electronic equipment. Tests and measurementsTest 10d. Electrical overload (connectors)
BS EN 60512-1-1:2002. Connectors for electronic equipment. Tests and measurements. GeneralTest 1a. Visual examination
BS EN 60512-1-100:2001, IEC 60512-1-100:2001. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. GeneralGeneral. Applicable publications
BS EN 60512-1-100:2006. Connectors for electronic equipment. Test and measurements.General
BS EN 60512-1-100:2012. Connectors for electronic equipment. Tests and measurementsGeneral. Applicable publications
BS EN 60512-11-1:1999, IEC 60512-11-1:1995. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Climatic testsTest 11a. Climatic sequence
BS EN 60512-11-1:1999. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Climatic testsTest 11a. Climatic sequence
BS EN 60512-11-10:2002. Connectors for electronic equipment. Tests and measurements. Climatic testsTest 11j. Cold
BS EN 60512-11-11:2002. Connectors for electronic equipment. Tests and measurements. Climatic testsTest 11k. Low air pressure
BS EN 60512-11-12:2002. Connectors for electronic equipment. Tests and measurements. Climatic testsTest 11m. Damp heat, cyclic
BS EN 60512-11-13:2002, IEC 60512-11-13:2002. Connectors for electronic equipment. Tests and measurements. Climatic testsTest 11n. Gas tightness, solderless wrapped connections
BS EN 60512-11-14:1997, IEC 60512-11-14:1996. Connectors for electronic equipment. Tests and measurements. Climatic testsTest 11p. Flowing single gas corrosion test
BS EN 60512-11-14:2003. Connectors for electronic equipment. Tests and measurements. Climatic testsFlowing single gas corrosion test
BS EN 60512-11-2:2002. Connectors for electronic equipment. Tests and measurements. Climatic testsTest 11b. Combined/sequential cold, low air pressure and damp heat
BS EN 60512-11-3:2002. Connectors for electronic equipment. Tests and measurements. Climatic testsTest 11c. Damp heat, steady state
BS EN 60512-11-4:2002. Connectors for electronic equipment. Tests and measurements. Climatic testsTest 11d. Rapid change of temperature
BS EN 60512-11-5:2002. Connectors for electronic equipment. Tests and measurements. Climatic testsTest 11e. Mould growth
BS EN 60512-11-6:2002. Connectors for electronic equipment. Tests and measurements. Climatic testsTest 11f. Corrosion, salt mist
BS EN 60512-11-7:1997, IEC 60512-11-7:1996. Connectors for electronic equipment. Tests and measurements. Climatic testsTest 11g. Flowing mixed gas corrosion test
BS EN 60512-11-7:2003. Connectors for electronic equipment. Tests and measurementsFlowing mixed gas corrosion test
BS EN 60512-11-8:1999, IEC 60512-11-8:1995. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Climatic testsTest 11h. Sand and dust
BS EN 60512-11-8:1999. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Climatic testsTest 11h. Sand and dust
BS EN 60512-11-9:2002. Connectors for electronic equipment. Tests and measurements. Climatic testsTest 11i. Dry heat
BS EN 60512-1-2:2002. Connectors for electronic equipment. Tests and measurements. GeneralTest 1b. Examination of dimension and mass
BS EN 60512-12-1:2006. Connectors for electronic equipment. Tests and measurementsSoldering tests
BS EN 60512-12-2:2006. Connectors for electronic equipment. Tests and measurementsSoldering tests. Test 12b. Solderability, wetting, soldering iron method
BS EN 60512-12-3:2006. Connectors for electronic equipment. Tests and measurementsSoldering tests
BS EN 60512-12-4:2006. Connectors for electronic equipment. Tests and measurementsSoldering tests. Test 12d. Resistance to soldering heat, solder bath method
BS EN 60512-12-5:2006. Connectors for electronic equipment. Tests and measurementsSoldering tests. Test 12e. Resistance to soldering heat, soldering iron method
BS EN 60512-12-6:1997, IEC 60512-12-6:1996. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Soldering testsTest 12f. Sealing against flux and cleaning solvents in machine soldering
BS EN 60512-12-7:2001, IEC 60512-12-7:2001. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Soldering testsTest 12g. Solderability, wetting balance method
BS EN 60512-1-3:1997, IEC 60512-1-3:1997. Connectors for electronic equipment. Tests and measurements. GeneralTest 1c. Electrical engagement length
BS EN 60512-13-1:1997, IEC 60512-13-1:1996. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Mechanical operating testsTest 13a. Engaging and separating forces
BS EN 60512-13-1:2006. Connectors for electronic equipment. Tests and measurementsMechanical operation tests. Test 13a: Engaging and separating forces
BS EN 60512-13-2:2006. Connectors for electronic equipment. Tests and measurementsMechanical operation tests. Test 13b. Insertion and withdrawal forces
BS EN 60512-13-5:2006. Connectors for electronic equipment. Tests and measurementsMechanical operation tests. Test 13e. Polarizing and keying method
BS EN 60512-1-4:1997, IEC 60512-1-4:1997. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. GeneralTest 1d. Contact protection effectiveness (scoop-proof)
BS EN 60512-14-2:2006. Connectors for electronic equipment. Tests and measurementsSealing tests
BS EN 60512-14-4:2006. Connectors for electronic equipment. Tests and measurementsSealing tests
BS EN 60512-14-5:2006. Connectors for electronic equipment. Tests and measurementsSealing tests
BS EN 60512-14-6:2006. Connectors for electronic equipment. Tests and measurementsSealing tests
BS EN 60512-14-7:1998, IEC 60512-14-7:1997. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Sealing testsTest 14g. Impacting water
BS EN 60512-15-1:2008. Connectors for electronic equipment. Tests and measurementsConnector tests (mechanical). Test 15a. Contact retention in insert
BS EN 60512-15-2:2008. Connectors for electronic equipment. Tests and measurementsConnector tests (mechanical). Test 15b. Insert retention in housing (axial)
BS EN 60512-15-3:2008. Connectors for electronic equipment. Tests and measurementsConnector tests (mechanical). Test 15c. Insert retention in housing (torsional)
BS EN 60512-15-4:2008. Connectors for electronic equipment. Tests and measurementsConnector tests (mechanical). Test 15d. Contact insertion, release and extraction force
BS EN 60512-15-5:2008. Connectors for electronic equipment. Tests and measurementsConnector tests (mechanical). Test 15e. Contact retention in insert, cable nutation
BS EN 60512-15-6:2008. Connectors for electronic equipment. Tests and measurementsConnector tests (mechanical). Test 15f. Effectiveness of connector coupling devices
BS EN 60512-15-7:2008. Connectors for electronic equipment. Tests and measurementsConnector tests (mechanical). Test 15g. Robustness of protective cover attachment
BS EN 60512-15-8:1997, IEC 60512-15-8:1995. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Mechanical tests on contacts and terminationsTest 15h. Contact retention system resistance to tool application
BS EN 60512-16-1:2008. Connectors for electronic equipment. Tests and measurementsMechanical tests on contacts and terminations. Test 16a. Probe damage
BS EN 60512-16-11:2008. Connectors for electronic equipment. Tests and measurementsMechanical tests on contacts and terminations. Test 16k. Stripping force, solderless wrapped connections
BS EN 60512-16-13:2008. Connectors for electronic equipment. Tests and measurementsMechanical tests on contacts and terminations. Test 16m. Un-wrapping, solderless wrapped connections
BS EN 60512-16-14:2008. Connectors for electronic equipment. Tests and measurementsMechanical tests on contacts and terminations. Test 16n. Bending strength, fixed male tabs
BS EN 60512-16-16:2008. Connectors for electronic equipment. Tests and measurementsMechanical tests on contacts and terminations. Test 16p. Torsional strength, fixed male tabs
BS EN 60512-16-17:2008. Connectors for electronic equipment. Tests and measurementsMechanical tests on contacts and terminations. Test 16q. Tensile and compressive strength, fixed male tabs
BS EN 60512-16-18:2008. Connectors for electronic equipment. Tests and measurementsMechanical tests on contacts and terminations. Test 16r. Deflection of contacts, simulation
BS EN 60512-16-2:2008. Connectors for electronic equipment. Tests and measurementsMechanical tests on contacts and terminations. Test 16b. Restricted entry
BS EN 60512-16-20:1997, IEC 60512-16-20:1996. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Mechanical tests on contacts and terminationsTest 16t. Mechanical strength (wired termination of solderless connections)
BS EN 60512-16-21:2012. Connectors for electronic equipment. Tests and measurementsMechanical tests on contacts and terminations. Test 16u. Whisker test via the application of external mechanical stresses
BS EN 60512-16-3:2008. Connectors for electronic equipment. Tests and measurementsMechanical tests on contacts and terminations. Test 16c. Contact-bending strength
BS EN 60512-16-4:2008. Connectors for electronic equipment. Tests and measurementsMechanical tests on contacts and terminations. Test 16d. Tensile strength (crimped connections)
BS EN 60512-16-5:2008. Connectors for electronic equipment. Tests and measurementsMechanical tests on contacts and terminations. Test 16e. Gauge retention force (resilient contacts)
BS EN 60512-16-6:2008. Connectors for electronic equipment. Tests and measurementsMechanical tests on contacts and terminations. Test 16f. Robustness of terminations
BS EN 60512-16-7:2008. Connectors for electronic equipment. Tests and measurementsMechanical tests on contacts and terminations. Test 16g. Measurement of contact deformation after crimping
BS EN 60512-16-8:2008. Connectors for electronic equipment. Tests and measurementsMechanical tests on contacts and terminations. Test 16h. Insulating grip effectiveness (crimped connections)
BS EN 60512-16-9:2008. Connectors for electronic equipment. Tests and measurementsMechanical tests on contacts and terminations. Test 16i. Grounding contact spring holding force
BS EN 60512-17-1:2010. Connectors for electronic equipment. Tests and measurementsCable clamping tests. Test 17a. Cable clamp robustness
BS EN 60512-17-2:2011. Connectors for electronic equipment. Tests and measurementsCable clamping tests. Test 17b. Cable clamp resistance to cable rotation
BS EN 60512-17-3:2010. Connectors for electronic equipment. Tests and measurementsCable clamping tests. Test 17c. Cable clamp resistance to cable pull (tensile)
BS EN 60512-17-4:2010. Connectors for electronic equipment. Tests and measurementsCable clamping tests. Test 17d. Cable clamp resistance to cable torsion
BS EN 60512-19-1:2010. Connectors for electronic equipment. Tests and measurementsChemical resistance tests. Test 19a. Fluid resistance of pre-insulated crimp barrels
BS EN 60512-19-3:1998, IEC 60512-19-3:1997. Connectors for electronic equipment. Tests and measurements. Chemical resistance testsFluid resistance
BS EN 60512-20-1:2010. Connectors for electronic equipment. Tests and measurementsFire hazard tests. Test 20a. Flammability, needle-flame
BS EN 60512-20-2:2001, IEC 60512-20-2:2000. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods.Test 20b. Flammability tests. Fireproofness
BS EN 60512-20-3:2010. Connectors for electronic equipment. Tests and measurementsFire hazard tests. Test 20c. Flammability, glow-wire
BS EN 60512-2-1:2002. Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance testsTest 2a. Contact resistance. Millivolt level method
BS EN 60512-21-1:2010. Connectors for electronic equipment. Tests and measurementsR.F. resistance tests. Test 21a. R.F. shunt resistance
BS EN 60512-2-2:2003. Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance testsTest 2b. Contact resistance. Specified test current method
BS EN 60512-22-1:2010. Connectors for electronic equipment. Tests and measurementsCapacitance tests. Test 22a. Capacitance
BS EN 60512-2-3:2002. Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance testsTest 2c. Contact resistance variation
BS EN 60512-23-2:2010. Connectors for electronic equipment. Tests and measurementsScreening and filtering tests. Test 23b. Suppression characteristics of integral filters
BS EN 60512-23-3:2001, IEC 60512-23-3:2000. Connectors for electronic equipment. Tests and measurements.Test 23c. Shielding effectiveness of connectors and accessories
BS EN 60512-23-4:2001, IEC 60512-23-4:2001. Connectors for electronic equipment. Tests and measurementsScreening and filtering tests
BS EN 60512-23-7:2005. Connectors for electronic equipment. Tests and measurementsScreening and filtering tests. Test 23g. Effective transfer impedance of connectors
BS EN 60512-24-1:2012. Connectors for electronic equipment. Tests and measurementsMagnetic interference tests. Test 24a: Residual magnetism
BS EN 60512-2-5:2003. Connectors for electronic equipment. Tests and measurementsTest 2e. Contact disturbance
BS EN 60512-25-1:2001, IEC 60512-25-1:2001. Connectors for electronic equipment. Test and measurements.Test 25a. Crosstalk ratio
BS EN 60512-25-2:2002. Connectors for electronic equipment. Tests and measurements.Test 25b. Attenuation (insertion loss)
BS EN 60512-25-3:2001, IEC 60512-25-3:2001. Connectors for electronic equipment. Test and measurements.Test 25c. Rise time degradation
BS EN 60512-25-4:2001, IEC 60512-25-4:2001. Connectors for electronic equipment. Test and measurements.Test 25d. Propagation delay
BS EN 60512-25-5:2004. Connectors for electronic equipment. Tests and measurementsTest 25e. Return loss
BS EN 60512-25-6:2004. Connectors for electronic equipment. Tests and measurementsTest 25f. Eye pattern and jitter
BS EN 60512-25-7:2005. Connectors for electronic equipment. Tests and measurementsTest 25g. Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
BS EN 60512-25-9:2008. Connectors for electronic equipment. Tests and measurementsSignal integrity tests. Test 25i. Alien crosstalk
BS EN 60512-2-6:2002. Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance testsTest 2f. Housing (shell) electrical continuity
BS EN 60512-26-100:2008+A1:2011. Connectors for electronic equipment. Tests and measurementsMeasurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 Tests 26a to 26g
BS EN 60512-27-100:2012. Connectors for electronic equipment. Tests and measurementsSignal integrity tests up to 500 MHz on IEC 60603-7 series connectors. Tests 27a to 27g
BS EN 60512-28-100:2013. Connectors for electronic equipment. Tests and measurementsSignal integrity tests up to 1000 MHz on IEC 60603-7 and IEC 61076-3 series connectors. Tests 28a to 28g
BS EN 60512-3-1:2002. Connectors for electronic equipment. Tests and measurements. Insulation testsTest 3a. Insulation resistance
BS EN 60512-4-1:2003. Connectors for electronic equipment. Tests and measurements. Voltage stress testsTest 4a. Voltage proof
BS EN 60512-4-2:2002. Connectors for electronic equipment. Tests and measurements. Voltage stress testsTest 4b. Partial discharge
BS EN 60512-4-3:2002. Connectors for electronic equipment. Tests and measurements. Voltage stress testsTest 4c. Voltage proof of pre-insulated crimp barrels
BS EN 60512-5-1:2002. Connectors for electronic equipment. Tests and measurements. Current-carrying capacity testsTest 5a. Temperature rise
BS EN 60512-5-2:2002. Connectors for electronic equipment. Tests and measurements. Current-carrying capacity testsTest 5b. Current-temperature derating
BS EN 60512-6-1:2002. Connectors for electronic equipment. Tests and measurements. Dynamic stress testsTest 6a. Acceleration, steady state
BS EN 60512-6-2:2002. Connectors for electronic equipment. Tests and measurements. Dynamic stress testsTest 6b. Bump
BS EN 60512-6-3:2002. Connectors for electronic equipment. Tests and measurements. Dynamic stress testsTest 6c. Shock
BS EN 60512-6-4:2002. Connectors for electronic equipment. Tests and measurements. Dynamic stress testsTest 6d. Vibration (sinusoidal)
BS EN 60512-6-5:2001. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Dynamic stress testsTest 6e. Random vibration
BS EN 60512-7-1:2010. Connectors for electronic equipment. Tests and measurementsImpact tests (free connectors). Test 7a. Free fall (repeated)
BS EN 60512-7-2:2012. Connectors for electronic equipment. Tests and measurementsImpact tests (free connectors). Test 7b. Mechanical strength impact
BS EN 60512-8-1:2010. Connectors for electronic equipment. Tests and measurementsStatic load tests (fixed connectors). Test 8a. Static load, transverse
BS EN 60512-8-2:2011. Connectors for electronic equipment. Tests and measurementsStatic load tests (fixed connectors). Test 8b. Static load, axial
BS EN 60512-8-3:2011. Connectors for electronic equipment. Tests and measurementsStatic load tests (fixed connectors). Test 8c. Robustness of actuating lever
BS EN 60512-9-1:2010. Connectors for electronic equipment. Tests and measurementsEndurance tests. Test 9a. Mechanical operation
BS EN 60512-9-2:2012. Connectors for electronic equipment. Tests and measurementsEndurance tests. Test 9b. Electrical load and temperature
BS EN 60512-9-3:2006. Connectors for electronic equipment. Tests and measurementsEndurance tests. Test 9c. Mechanical operation (engaging/separating) with electrical load
BS EN 60512-9-3:2011. Connectors for electronic equipment. Tests and measurementsEndurance tests. Test 9c. Mechanical operation (engaging/separating) with electrical load
BS EN 60512-9-4:2011. Connectors for electronic equipment. Tests and measurementsEndurance tests. Test 9d. Durability of contact retention system and seals (maintenance, ageing)
BS EN 60512-9-5:2010. Connectors for electronic equipment. Tests and measurementsEndurance tests. Test 9e. Current loading, cyclic
BS EN 60512-99-001:2012. Connectors for electronic equipment. Tests and measurementsTest schedule for engaging and separating connectors under electrical load. Test 99a: Connectors used in twisted pair communication cabling with remote power
BS EN 60514:1995. Acceptance inspection of class 2 alternating-current watthour meters
BS EN 60517:1997, IEC 60517:1990. Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
BS EN 60519-1:1993, IEC 60519-1:1984. Safety in electroheat installationsGeneral requirements
BS EN 60519-1:2003. Safety in electroheat installationsGeneral requirements
BS EN 60519-1:2011. Safety in electroheating installationsGeneral requirements
BS EN 60519-10:2005. Safety in electroheat installationsParticular requirements for electrical resistance trace heating systems for industrial and commercial applications
BS EN 60519-10:2013. Safety in electroheating installationsParticular requirements for electrical resistance trace heating systems for industrial and commercial applications
BS EN 60519-11:1997, IEC 60519-11:1997. Safety in electroheat installationsParticular requirements for installations for electromagnetic stirring, transport or pouring of metal liquids
BS EN 60519-11:2007. Safety in electroheat installationsParticular requirements for installations using the effect of electromagnetic forces on liquid metals
BS EN 60519-12:2013. Safety in electroheating installationsParticular requirements for infrared electroheating installations
BS EN 60519-2:1994, IEC 60519-2:1992. Safety in electroheat installations.Particular requirements for resistance heating equipment
BS EN 60519-2:2006. Safety in electroheat installationsParticular requirements for resistance heating equipment
BS EN 60519-21:1998, IEC 60519-21:1998. Safety in electroheat installationsParticular requirements for resistance heating equipment. Heating and melting glass equipment
BS EN 60519-21:2009. Safety in electroheat installationsParticular requirements for resistance heating equipment. Heating and melting glass equipment
BS EN 60519-3:1996. Safety in electroheat installationsParticular requirements for induction and conduction heating and induction melting installations
BS EN 60519-3:2005. Safety in electroheat installationsParticular requirements for induction and conduction heating and induction melting installations
BS EN 60519-4:1997, IEC 60519-4:1995. Safety in electroheat installationsParticular requirements for arc furnace installations
BS EN 60519-4:2006. Safety in electroheat installationsParticular requirements for arc furnace installations
BS EN 60519-4:2013. Safety in electroheating installationsParticular requirements for arc furnace installations
BS EN 60519-6:2002. Safety in electroheat installationsSpecifications for safety in industrial microwave heating equipment
BS EN 60519-6:2011. Safety in electroheat installationsSpecifications for safety in industrial microwave heating equipment
BS EN 60519-7:2009. Safety in electroheat installationsParticular requirements for installations with electron guns
BS EN 60519-8:2005. Safety in electroheat installationsParticular requirements for electroslag remelting furnaces
BS EN 60519-9:1996, IEC 60519-9:1987. Safety in electroheat installationsParticular requirements for high-frequency dielectric heating installations
BS EN 60519-9:2005. Safety in electroheat installationsParticular requirements for high-frequency dielectric heating installations
BS EN 60521:1995. Class 0.5, 1 and 2 alternating-current watthour meters
BS EN 60522:1999, IEC 60522:1999. Determination of the permanent filtration of X-ray tube assemblies
BS EN 60523:1993. Direct-current potentiometers
BS EN 60524:1993, IEC 60524:1975. Direct-current resistive volt ratio boxes
BS EN 60526:2004. High-voltage cable plug and socket connections for medical X-ray equipment
BS EN 60529:1992+A2:2013. Degrees of protection provided by enclosures (IP code)
BS EN 60531:2000, IEC 60531:1999. Household electric thermal storage room heaters. Methods for measuring performance
BS EN 60534-1:1993. Industrial-process control valvesIndustrial-process control valves. Control valve terminology and general considerations
BS EN 60534-1:2005. Industrial-process control valvesControl valve terminology and general considerations
BS EN 60534-2-1:1993. Industrial-process control valves. Flow capacitySizing equations for incompressible fluid flow under installed conditions
BS EN 60534-2-1:1999, IEC 60534-2-1:1998. Industrial-process control valves. Flow capacityFlow capacity. Sizing equations for fluid flow under installed conditions
BS EN 60534-2-1:2011. Industrial-process control valvesFlow capacity. Sizing equations for fluid flow under installed conditions
BS EN 60534-2-2:1993. Industrial-process control valves. Flow capacitySizing equations for compressible fluid flow under installed conditions
BS EN 60534-2-3:1993. Industrial-process control valves. Flow capacityTest procedures
BS EN 60534-2-3:1998, IEC 60534-2-3:1997. Industrial-process control valves. Flow capacityTest procedures
BS EN 60534-2-4:2009. Industrial-process control valvesFlow capacity. Inherent flow characteristics and rangeability
BS EN 60534-2-5:2003. Industrial-process control valves. Flow capacitySizing equations for fluid flow through multistage control valves with interstage recovery
BS EN 60534-3-1:2000, IEC 60534-3-1:2000. Industrial-process control valves.Dimensions. Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
BS EN 60534-3-2:2001, IEC 60534-3-2:2001. Industrial-process control valves. DimensionsFace-to-face dimensions for rotary control valves except butterfly valves
BS EN 60534-3-3:1998, IEC 60534-3-3:1998. Industrial-process control valves.Dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
BS EN 60534-4:2006. Industrial-process control valvesInspection and routine testing
BS EN 60534-6-1:1998, IEC 60534-6-1:1997. Industrial-process control valves. Mounting details for attachment of positioners to control valvesPositioner mounting on linear actuators
BS EN 60534-6-2:2001, IEC 60534-6-2:2000. Industrial-process control valves. Mounting details for attachment of positioners to control valvesPositioner mounting on rotary actuators
BS EN 60534-7:2010. Industrial-process control valvesControl valve data sheet
BS EN 60534-8-1:2001, IEC 60534-8-1:1986. Industrial-process control valves. Noise considerationsLaboratory measurement of noise generated by aerodynamic flow through control valves
BS EN 60534-8-1:2005. Industrial-process control valvesNoise considerations. Laboratory measurement of noise generated by aerodynamic flow through control valves
BS EN 60534-8-2:1993. Industrial-process control valves. Noise considerationsLaboratory measurement of noise generated by hydrodynamic flow through control valves
BS EN 60534-8-2:2011. Industrial-process control valvesNoise considerations. Laboratory measurement of noise generated by hydrodynamic flow through control valves
BS EN 60534-8-3:1996, IEC 60534-8-3:1995. Industrial-process control valves. Noise considerationsControl valve aerodynamic noise prediction method
BS EN 60534-8-3:2000, IEC 60534-8-3:2000. Industrial-process control valves. Noise considerationsControl valve aerodynamic noise prediction method
BS EN 60534-8-3:2011. Industrial-process control valvesNoise considerations. Control valve aerodynamic noise prediction method
BS EN 60534-8-4:1994, IEC 60534-8-4:1994. Industrial-process control valves. Noise considerationsPrediction of noise generated by hydrodynamic flow
BS EN 60534-8-4:2005. Industrial-process control valvesNoise considerations. Prediction of noise generated by hydrodynamic flow
BS EN 60534-9:2007. Industrial-process control valvesTest procedure for response measurements from step inputs
BS EN 60539-1:2002, IEC 60539-1:2002. Directly heated negative temperature coefficient thermistorsGeneric specification
BS EN 60539-1:2008. Directly heated negative temperature coefficient thermistorsGeneric specification
BS EN 60539-2:2004+A1:2010. Directly heated negative temperature coefficient thermistorsSectional specification. Surface mount negative temperature coefficient thermistors
BS EN 60544-1:1995, IEC 60544-1:1994. Electrical insulating materials. Determination of the effects of ionizing radiationRadiation interaction and dosimetry
BS EN 60544-1:2013. Electrical insulating materials. Determination of the effects of ionizing radiationRadiation interaction and dosimetry
BS EN 60544-2:2012. Electrical insulating materials. Determination of the effects of ionizing radiation on insulating materialsProcedures for irradiation and test
BS EN 60544-4:2003. Electrical insulating materials. Determination of the effects of ionizing radiationClassification system for service in radiation environments
BS EN 60544-5:2003. Electrical insulating materials. Determination of the effects of ionizing radiationProcedures for assessment of ageing in service
BS EN 60544-5:2012. Electrical insulating materials. Determination of the effects of ionizing radiationProcedures for assessment of ageing in service
BS EN 60546-1:1993. Controllers with analogue signals for use in industrial-process control systemsMethods for evaluating performance
BS EN 60546-1:2010. Controllers with analogue signals for use in industrial-process control systemsMethods of evaluating the performance
BS EN 60546-2:1993. Controllers with analogue signals for use in industrial-process control systemsGuidance for inspection and routine testing
BS EN 60546-2:2010. Controllers with analogue signals for use in industrial-process control systemsGuidance for inspection and routine testing
BS EN 60549:2013. High-voltage fuses for the external protection of shunt capacitors
BS EN 60551:1993. Determination of transformer and reactor sound levels
BS EN 60554-2:2002. Cellulosic papers for electrical purposesMethods of test
BS EN 60556:2006. Gyromagnetic materials intended for application at microwave frequencies. Measuring methods for properties
BS EN 60564:1993. D.C. bridges for measuring resistance
BS EN 60565:2007. Underwater acoustics. Hydrophones. Calibration in the frequency range 0,01 Hz to 1 MHz
BS EN 60567:1993, IEC 60567:1992. Guide for the sampling of gases and of oil from oil-filled electrical equipment and for the analysis of free and dissolved gases
BS EN 60567:2005. Oil-filled electrical equipment. Sampling of gases and of oil for analysis of free and dissolved gases. Guidance
BS EN 60567:2011. Oil-filled electrical equipment. Sampling of gases and analysis of free and dissolved gases. Guidance
BS EN 60570:1994. Electrical supply track systems for luminaires
BS EN 60570:1997. Electrical supply track systems for luminaires
BS EN 60570:2003. Electrical supply track systems for luminaires
BS EN 60570-2-1:1995, IEC 60570-2-1:1994. Electrical supply track systems for luminaires. Mixed supply systemsClasses I and III
BS EN 60574-21:1994, BS 5817-21:1994,IEC 60574-21:1992. Specification for audiovisual, video and television equipment and systemsVideo tape leader and trailer for education and training applications
BS EN 60580:2000, IEC 60580:2000. Dose area product meters
BS EN 60584-1:1996, IEC 60584-1:1995. ThermocouplesReference tables
BS EN 60584-2:1993. ThermocouplesTolerances
BS EN 60584-3:2008. ThermocouplesExtension and compensating cables. Tolerances and identification system
BS EN 60587:2007. Electrical insulating materials used under severe ambient conditions. Test methods for evaluating resistance to tracking and erosion
BS EN 6059-100:2011. Aerospace series. Electrical cables, installation. Protection sleeves. Test methodsGeneral
BS EN 6059-501:2010. Aerospace series. Electrical cables, installation. Protection sleeves. Test methodsVoltage proof test
BS EN 6059-502:2009. Aerospace series. Electrical cables, installation. Protection sleeves. Test methodsResistance to electrical arcs
BS EN 6059-503:2012. Aerospace series. Electrical cables, installation. Protection sleeves. Test methodsTemperature rise due to rated current injected on the sleeve
BS EN 60598-1:1993. LuminairesGeneral requirements and test
BS EN 60598-1:1997. LuminairesGeneral requirements and tests
BS EN 60598-1:2000. LuminairesGeneral requirements and tests
BS EN 60598-1:2004. LuminairesGeneral requirements and tests
BS EN 60598-1:2008. Luminaires General requirements and tests
BS EN 60598-2-10:2003. Luminaires. Particular requirementsPortable luminaires for children
BS EN 60598-2-11:2005. LuminairesParticular requirements
BS EN 60598-2-11:2013. LuminairesParticular requirements. Aquarium luminaires
BS EN 60598-2-12:2006. LuminairesParticular requirements
BS EN 60598-2-12:2013. LuminairesParticular requirements. Mains socket-outlet mounted nightlights
BS EN 60598-2-13:2006+A1:2012. LuminairesParticular requirements. Ground recessed luminaires
BS EN 60598-2-14:2009. LuminairesParticular requirements. Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment
BS EN 60598-2-18:1994+A1:2012. LuminairesParticular requirements. Luminaires for swimming pools and similar applications
BS EN 60598-2-2:1997, IEC 60598-2-2:1996. Luminaires. Particular requirementsRecessed luminaires
BS EN 60598-2-2:2012. LuminairesParticular requirements. Recessed luminaires
BS EN 60598-2-20:1992. Luminaires. Particular requirementsLighting chains
BS EN 60598-2-20:1998. LuminairesParticular requirements. Lighting chains
BS EN 60598-2-20:2010. LuminairesParticular requirements. Lighting chains
BS EN 60598-2-22:1998+A2:2008. LuminairesParticular requirements. Luminaires for emergency lighting
BS EN 60598-2-23:1997, IEC 60598-2-23:1996. Luminaires. Particular requirementsExtra low voltage lighting systems for filament lamps
BS EN 60598-2-24:1999. Luminaires. Particular requirementsLuminaires with limited surface temperatures
BS EN 60598-2-24:2013. LuminairesParticular requirements. Luminaires with limited surface temperatures
BS EN 60598-2-25:1995, IEC 60598-2-25:1994. Luminaires. Particular requirementsLuminaires for use in clinical areas of hospitals and health care buildings
BS EN 60598-2-3:1994, IEC 60598-2-3:1993. Luminaires. Particular requirementsLuminaires for road and street lighting
BS EN 60598-2-3:2003+A1:2011. LuminairesParticular requirements. Luminaires for road and street lighting
BS EN 60598-2-4:1998. Luminaires. Particular requirementsPortable general purpose luminaires
BS EN 60598-2-5:1998, IEC 60598-2-5:1998. Luminaires. Particular requirementsFloodlights
BS EN 60598-2-6:1995, IEC 60598-2-6:1994. Luminaires. Particular requirementsLuminaires with built-in transformers for filament lamps
BS EN 60598-2-7:1997. Luminaires. Particular requirementsPortable luminaires for garden use
BS EN 60598-2-8:1997+A2:2008. LuminairesParticular requirements
BS EN 60598-2-8:2013. LuminairesParticular requirements. Handlamps
BS EN 60599:1999, IEC 60599:1999. Mineral oil-impregnated electrical equipment in service. Guide to the interpretation of dissolved and free gases analysis
BS EN 606:2004. Bar coding. Transport and handling labels for steel products
BS EN 60601-1:1990, BS 5724-1:1989. Medical electrical equipmentGeneral requirements for safety
BS EN 60601-1:2006+A11:2011. Medical electrical equipmentGeneral requirements for basic safety and essential performance
BS EN 60601-1-1:1993, BS 5724-1.1:1992,IEC 60601-1-1:1992. Medical electrical equipment. General requirements for safetyCollateral standard. Safety requirements for medical electrical systems
BS EN 60601-1-1:2001. Medical electrical equipment. General requirements for safetyCollateral standard. Safety requirements for medical electrical systems
BS EN 60601-1-10:2008. Medical electrical equipmentGeneral requirements for basic safety and essential performance. Collateral Standard. Requirements for the development of physiologic closed-loop controllers
BS EN 60601-1-11:2010. Medical electrical equipmentGeneral requirements for basic safety and essential performance. Collateral standard. Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
BS EN 60601-1-2:1993, BS 5724-1.2:1993,IEC 60601-1-2:1993. Medical electrical equipment. General requirements for safetyCollateral standard. Electromagnetic compatibility. Requirements and tests
BS EN 60601-1-2:2002, IEC 60601-1-2:2002. Medical electrical equipment. General requirements for safetyCollateral standard. Electromagnetic compatibility. Requirements and tests
BS EN 60601-1-2:2007. Medical electrical equipmentGeneral requirements for basic safety and essential performance. Collateral standard. Electromagnetic compatibility. Requirements and tests
BS EN 60601-1-3:1995, BS 5724-1.3:1995,IEC 60601-1-3:1994. Medical electrical equipment. General requirements for safetyCollateral standard. General requirements for radiation protection in diagnostic X-ray equipment
BS EN 60601-1-3:2008+A1:2013. Medical electrical equipmentGeneral requirements for basic safety and essential performance. Collateral Standard: Radiation protection in diagnostic X-ray equipment
BS EN 60601-1-4:1997, BS 5724-1.4:1997,IEC 60601-1-4:1996. Medical electrical equipment. General requirements for safetyCollateral standard. General requirements for programmable electrical medical systems
BS EN 60601-1-6:2004. Medical electrical equipmentGeneral requirements for safety. Collateral standard. Usability
BS EN 60601-1-6:2007. Medical electrical equipmentGeneral requirements for basic safety and essential performance. Collateral Standard. Usability
BS EN 60601-1-6:2010. Medical electrical equipmentGeneral requirements for basic safety and essential performance. Collateral standard. Usability
BS EN 60601-1-8:2004. Medical electrical equipmentGeneral requirements for safety
BS EN 60601-1-8:2007+A1:2013. Medical electrical equipmentGeneral requirements for basic safety and essential performance. Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
BS EN 60601-1-9:2008. Medical electrical equipmentGeneral requirements for basic safety and essential performance. Collateral standard. Requirements for environmentally conscious design
BS EN 60601-2-1:1998, BS 5724-2-1:1998,IEC 60601-2-1:1998. Medical electrical equipmentParticular requirements for the safety of electron accelerators in the range 1 MeV to 50 MeV
BS EN 60601-2-10:2001, BS 5724-2.10:1988. Medical electrical equipmentParticular requirements for the safety of nerve and muscle stimulators
BS EN 60601-2-11:1998, BS 5724-2.11:1998,IEC 60601-2-11:1997. Medical electrical equipmentParticular requirements for the safety
BS EN 60601-2-12:2006. Medical electrical equipmentParticular requirements for the safety of lung ventilators. Critical care ventilators
BS EN 60601-2-13:2006. Medical electrical equipmentParticular requirements for the safety and essential performance of anaesthetic systems
BS EN 60601-2-16:1998, BS 5724-2.16:1998,IEC 60601-2-16:1998. Medical electrical equipment. Particular requirements for safetyParticular requirements for the safety of haemodialysis, haemodiafiltration and haemofiltration equipment
BS EN 60601-2-17/A1:1996, BS 5724-2.17/Supplement 1:1996,IEC 60601-2-17:Amd 1:1996. Medical electrical equipment. Particular requirements for safetyRevised and additional text
BS EN 60601-2-17:1996, BS 5724-2.17:1990,IEC 60601-2-17:1989. Medical electrical equipment. Particular requirements for safetySpecification for remote-controlled automatically-driven gamma-ray afterloading equipment
BS EN 60601-2-17:2004. Medical electrical equipmentParticular requirements for the safety of automatically-controlled brachytherapy afterloading equipment
BS EN 60601-2-18:1997, BS 5724-2.18:1997,IEC 60601-2-18:1996. Medical electrical equipment. Particular requirements for safetySpecification for endoscopic equipment
BS EN 60601-2-19:1997, BS 5724-2.119:1997,IEC 60601-2-19:1990. Medical electrical equipment. Particular requirements for safetySpecification for baby incubators
BS EN 60601-2-19:2009+A11:2011. Medical electrical equipmentParticular requirements for the basic safety and essential performance of infant incubators
BS EN 60601-2-2:1993. Medical electrical equipment. Particular requirements for safetySpecification for high frequency surgical equipment
BS EN 60601-2-2:2001. Medical electrical equipmentParticular requirements for the safety of high frequency surgical equipment
BS EN 60601-2-2:2007. Medical electrical equipmentParticular requirements for the safety of high frequency surgical equipment
BS EN 60601-2-2:2009+A11:2011. Medical electrical equipmentParticular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
BS EN 60601-2-20:1997, BS 5724-2.120:1997,IEC 60601-2-20:1990. Medical electrical equipment. Particular requirements for safetySpecification for transport incubators
BS EN 60601-2-20:2009+A11:2011. Medical electrical equipmentParticular requirements for the basic safety and essential performance of infant transport incubators
BS EN 60601-2-21:1995, BS 5724-2.121:1995,IEC 60601-2-21:1994. Medical electrical equipment. Particular requirements for safetySpecification for infant radiant warmers
BS EN 60601-2-21:1997, BS 5724-2.121:1997,IEC 60601-2-21:1994. Medical electrical equipment. Particular requirements for safetySpecification for infant radiant warmers
BS EN 60601-2-21:2009+A11:2011. Medical electrical equipmentParticular requirements for the basic safety and essential performance of infant radiant warmers
BS EN 60601-2-22:1993, BS 5724:Section 2.122:1993,IEC 60601-2-22:1992. Medical electrical equipment. Particular requirements for safetySpecification for diagnostic and therapeutic laser equipment
BS EN 60601-2-22:1996, BS 5724-2.122:1996,IEC 60601-2-22:1995. Medical electrical equipment. Particular requirements for safetySpecification for diagnostic and therapeutic laser equipment
BS EN 60601-2-22:2013. Medical electrical equipmentParticular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
BS EN 60601-2-23:1998, BS 5724-2.123:1996,IEC 60601-2-23:1993. Medical electrical equipmentParticular requirements for the safety of transcutaneous partial pressure monitoring equipment
BS EN 60601-2-23:2000, IEC 60601-2-23:1999. Medical electrical equipmentParticular requirements for the safety, including essential performance, of transcutaneous partial pressure monitoring equipment
BS EN 60601-2-24:1998, BS 5724-2.124:1998,IEC 60601-2-24:1998. Medical electrical equipment. Particular requirements for safetyParticular requirements for the safety of infusion pumps and controllers
BS EN 60601-2-25:1996, IEC 60601-2-25:1993. Medical electrical equipment. Particular requirements for safetySpecification for electrocardiographs
BS EN 60601-2-26:1995, BS 5724-2.126:1995,IEC 60601-2-26:1994. Medical electrical equipment. Particular requirements for safetySpecification for electroencephalographs
BS EN 60601-2-26:2003. Medical electrical equipment. Particular requirements for safetyParticular requirements for the safety of electroencephalographs
BS EN 60601-2-27:1995, BS 5724-2.127:1995,IEC 60601-2-27:1994. Medical electrical equipment. Particular requirements for safetySpecification for electrocardiographic monitoring equipment
BS EN 60601-2-27:2006. Medical electrical equipmentParticular requirements for the safety, including essential performance, of electrocardiographic monitoring equipment
BS EN 60601-2-28:1993, BS 5724-2.128:1993,IEC 60601-2-28:1993. Medical electrical equipment. Particular requirements for safetySpecification for X-ray source assemblies and X-ray tube assemblies for medical diagnosis
BS EN 60601-2-28:2010. Medical electrical equipmentParticular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
BS EN 60601-2-29:1996. Medical electrical equipment. Particular requirements for safetySpecification for radiotherapy simulators
BS EN 60601-2-29:1999, BS 5724-2.129:1999,IEC 60601-2-29:1999. Medical electrical equipment. Particular requirements for safetyParticular requirements for the safety of radiotherapy simulators
BS EN 60601-2-29:2008+A11:2011. Medical electrical equipmentParticular requirements for the basic safety and essential performance of radiotherapy simulators
BS EN 60601-2-3:1993, BS 5724-2.3:1992,IEC 60601-2-3:1991. Medical electrical equipment. Particular requirements for safetySpecification for short-wave therapy equipment
BS EN 60601-2-30:1995, BS 5724-2.130:1995,IEC 60601-2-30:1995. Medical electrical equipment. Particular requirements for safetySpecification for automatic cycling indirect blood pressure monitoring equipment
BS EN 60601-2-30:2000, IEC 60601-2-30:1999. Medical electrical equipment. Particular requirements for safetyParticular requirements for safety, including essential performance, of automatic cycling non-invasive blood pressure monitoring equipment
BS EN 60601-2-31:1995, BS 5724-2.31:1995. Medical electrical equipment. Particular requirements for safetySpecification for external cardiac pacemakers with internal power source
BS EN 60601-2-31:2008+A1:2011. Medical electrical equipmentParticular requirements for the basic safety and essential performance of external cardiac pacemakers with internal power source
BS EN 60601-2-32:1995, BS 5724-2.32:1995,IEC 60601-2-32:1994. Medical electrical equipment. Particular requirements for safetySpecification for associated equipment of X-ray equipment
BS EN 60601-2-33:1996, BS 5724-2.33:1996,IEC 60601-2-33:1995. Medical electrical equipment. Particular requirements for safetySpecification for magnetic resonance equipment for medical diagnosis
BS EN 60601-2-33:2002+A2:2008. Medical electrical equipmentParticular requirements for the safety of magnetic resonance equipment for medical diagnosis
BS EN 60601-2-33:2010+A11:2011. Medical electrical equipmentParticular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis
BS EN 60601-2-34:1995, BS 5724-2.34:1995,IEC 60601-2-34:1994. Medical electrical equipment. Particular requirements for safetySpecification for direct blood-pressure monitoring equipment
BS EN 60601-2-34:2001, IEC 60601-2-34:2000. Medical electrical equipment. Particular requirements for safetyParticular requirements for the safety, including essential performance, of invasive blood pressure monitoring equipment
BS EN 60601-2-35:1997, BS 5724-2.35:1997,IEC 60601-2-35:1996. Medical electrical equipment. Particular requirements for safetySpecification for blankets, pads and mattresses intended for heating in medical use
BS EN 60601-2-36:1997, BS 5724-2.36:1997,IEC 60601-2-36:1997. Medical electrical equipment. Particular requirements for safetySpecification for equipment for extra-corporeally induced lithotripsy
BS EN 60601-2-37:2001, IEC 60601-2-37:2001. Medical electrical equipmentParticular requirements for the safety of ultrasonic diagnostic and monitoring equipment
BS EN 60601-2-37:2008+A11:2011. Medical electrical equipmentParticular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
BS EN 60601-2-38:1997, BS 5724-2.38:1997,IEC 60601-2-38:1996. Medical electrical equipment. Particular requirements for safetyParticular requirements for the safety of electrically operated hospital beds
BS EN 60601-2-39:1999, BS 5724-2.39:1999,IEC 60601-2-39:1999. Medical electrical equipment. Particular requirements for safetyParticular requirements for safety. Specification for peritoneal dialysis equipment
BS EN 60601-2-39:2008+A11:2011. Medical electrical equipmentParticular requirements for basic safety and essential performance of peritoneal dialysis equipment
BS EN 60601-2-4:2003. Medical electrical equipment. Particular requirements for safetyParticular requirements for the safety of cardiac defibrillators
BS EN 60601-2-4:2011. Medical electrical equipmentParticular requirements for the basic safety and essential performance of cardiac defibrillators
BS EN 60601-2-40:1998, BS 5724-2.40:1998,IEC 60601-2-40:1998. Medical electrical equipment. Particular requirements for safetySpecification for electromyographs and evoked response equipment
BS EN 60601-2-41:2000, IEC 60601-2-41:2000. Medical electrical equipment. Particular requirements for safetyParticular requirements for the safety of surgical luminaires and luminaires for diagnosis
BS EN 60601-2-41:2009+A11:2011. Medical electrical equipmentParticular requirements for basic safety and essential performance of surgical luminaires and luminaires for diagnosis
BS EN 60601-2-43:2001, IEC 60601-2-43:2000. Medical electrical equipment. Particular requirements for safetyParticular requirements for the safety of X-ray equipment for interventional procedures
BS EN 60601-2-43:2010. Medical electrical equipmentParticular requirements for basic safety and essential performance of X-ray equipment for interventional procedures
BS EN 60601-2-44:1999, BS 5724-2.44:1999,IEC 60601-2-44:1999. Medical electrical equipment. Particular requirements for safetyParticular requirements for the safety of X-ray equipment for computed tomography
BS EN 60601-2-44:2001, BS 5724-2.44:2001. Medical electrical equipment. Particular requirements for safetyParticular requirements for the safety of X-ray equipment for computed tomography
BS EN 60601-2-44:2009+A1:2012. Medical electrical equipmentParticular requirements for the basic safety and essential performance of X-ray equipment for computed tomography
BS EN 60601-2-45:1999, BS 5724-2.45:1999,IEC 60601-2-45:1998. Medical electrical equipmentParticular requirements for safety. Specification for mammographic X-ray equipment and mammographic stereotactic devices
BS EN 60601-2-45:2001, BS 5724-2.45:2001,IEC 60601-2-45:2001. Medical electrical equipmentParticular requirements for the safety of mammographic X-ray equipment and stereotactic devices
BS EN 60601-2-45:2011. Medical electrical equipmentParticular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices
BS EN 60601-2-46:1998, BS 5724-2.46:1998,IEC 60601-2-46:1998. Medical electrical equipment. Particular requirements for safetySpecification for operating tables
BS EN 60601-2-46:2011. Medical electrical equipmentParticular requirements for the basic safety and essential performance of operating tables
BS EN 60601-2-47:2001, IEC 60601-2-47:2001. Medical electrical equipment. Particular requirements for safetyParticular requirements for the safety, including essential performance, of ambulatory electrocardiographic systems
BS EN 60601-2-49:2001, IEC 60601-2-49:2001. Medical electrical equipment. Particular requirements for safetyParticular requirements for the safety of multifunction patient monitoring equipment
BS EN 60601-2-5:2001. Medical electrical equipment. Particular requirements for safetyParticular requirements for the safety of ultrasonic physiotherapy equipment
BS EN 60601-2-50:2002, IEC 60601-2-50:2000. Medical electrical equipment. Particular requirements for safetyParticular requirements for the safety of infant phototherapy equipment
BS EN 60601-2-50:2009+A11:2011. Medical electrical equipmentParticular requirements for the basic safety and essential performance of infant phototherapy equipment
BS EN 60601-2-51:2003. Medical electrical equipment. Particular requirements for safetyParticular requirements for safety, including essential performance, of recording and analysing single channel and multichannel electrocardiographs
BS EN 60601-2-52:2010. Medical electrical equipmentParticular requirements for basic safety and essential performance of medical beds
BS EN 60601-2-54:2009. Medical electrical equipmentParticular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
BS EN 60601-2-57:2011. Medical electrical equipmentParticular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use
BS EN 60601-2-65:2013. Medical electrical equipmentParticular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment
BS EN 60601-2-66:2013. Medical electrical equipmentParticular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
BS EN 60601-2-7:1998, BS 5724-2.7:1998,IEC 60601-2-7:1998. Medical electrical equipment. Particular requirements for safetySpecification for high voltage generators of diagnostic X-ray generators
BS EN 60601-2-8:1998, BS 5724-2.8:1998,IEC 60601-2-8:1987. Medical electrical equipment. Particular requirements for safetySpecification for therapeutic X-ray equipment operating in the range 10 kV to 1 MV
BS EN 60601-2-9:1997, BS 5724-2.9:1997,IEC 60601-2-9:1996. Medical electrical equipment. Particular requirements for safetySpecification for patient contact dosemeters used in radiotherapy with electrically connected radiation detectors
BS EN 60601-3-1:1997, BS 5724-3.101:1997,IEC 60601-3-1:1996. Medical electrical equipment. Particular requirements for performanceSpecification for transcutaneous oxygen and carbon dioxide partial pressure monitoring equipment
BS EN 60603-1:2000, IEC 60603-1:1991. Connectors for frequencies below 3 MHz for use with printed boardsGeneric specification. General requirements and guide for the preparation of detail specifications with assessed quality
BS EN 60603-10:1998, IEC 60603-10:1991. Connectors for frequencies below 3 MHz for use with printed boardsTwo-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type
BS EN 60603-12:1998, IEC 60603-12:1992. Connectors for frequencies below 3 MHz for use with printed boardsDetail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits
BS EN 60603-13:1998, IEC 60603-13:1995. Connectors for frequencies below 3 MHz for use with printed boardsDetail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in) with free connectors for non-accessible insulation displacement terminations (ID)
BS EN 60603-14:1999, IEC 60603-14:1998. Connectors for frequencies below 3 MHz for use with printed boardsDetail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment
BS EN 60603-2:1998, IEC 60603-2:1995,QC 010000XX0002:1995. Connectors for frequencies below 3 MHz for use with printed boardsDetail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features
BS EN 60603-3:1998, IEC 60603-3:1987. Connectors for frequencies below 3 MHz for use with printed boardsTwo-part connectors for printed boards having contacts spaced at 2,54 mm (0,100 in) centres and staggered terminations at that same spacing
BS EN 60603-4:1998, IEC 60603-4:1987. Connectors for frequencies below 3 MHz for use with printed boardsTwo-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing
BS EN 60603-5:1998, IEC 60603-5:1987. Connectors for frequencies below 3 MHz for use with printed boardsEdge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 mm) spacing
BS EN 60603-6:1998, IEC 60603-6:1987. Connectors for frequencies below 3 MHz for use with printed boardsEdge-socket connectors and printed board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness
BS EN 60603-7:1993, IEC 60603-7:1990. Connectors for frequencies below 3 MHz for use with printed boardsDetail specification for connectors, 8-way, including fixed and free connectors with common mating features
BS EN 60603-7:1997, IEC 60603-7:1996. Connectors for frequencies below 3 MHz for use with printed boardsDetail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality
BS EN 60603-7:2009+A1:2011. Connectors for electronic equipmentDetail specification for 8-way, unshielded, free and fixed connectors
BS EN 60603-7-1:2002. Connectors for frequencies below 3 MHz for use with printed boards.Detail specification for 8-way, shielded free and fixed connectors with common mating features, with assessed quality
BS EN 60603-7-1:2009. Connectors for electronic equipmentDetail specification for 8-way, shielded, free and fixed connectors
BS EN 60603-7-1:2011. Connectors for electronic equipmentDetail specification for 8-way, shielded, free and fixed connectors
BS EN 60603-7-2:2009. Connectors for electronic equipmentDetail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
BS EN 60603-7-2:2010. Connectors for electronic equipmentDetail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
BS EN 60603-7-3:2009. Connectors for electronic equipmentDetail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
BS EN 60603-7-3:2010. Connectors for electronic equipmentDetail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz
BS EN 60603-7-4:2005. Connectors for electronic equipmentDetail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
BS EN 60603-7-4:2010. Connectors for electronic equipmentDetail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
BS EN 60603-7-41:2010. Connectors for electronic equipmentDetail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz
BS EN 60603-7-5:2009. Connectors for electronic equipmentDetail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
BS EN 60603-7-5:2010. Connectors for electronic equipmentDetail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
BS EN 60603-7-51:2010. Connectors for electronic equipmentDetail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz
BS EN 60603-7-7:2002. Connectors for frequencies below 3 MHz for use with printed boards.Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 600 MHz (category 7, shielded)
BS EN 60603-7-7:2006. Connectors for electronic equipmentDetail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz
BS EN 60603-7-7:2010. Connectors for electronic equipmentDetail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz
BS EN 60603-7-71:2010. Connectors for electronic equipmentDetail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1000 MHz
BS EN 60603-8:1998, IEC 60603-8:1990. Connectors for frequencies below 3 MHz for use with printed boardsTwo-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm x 0,63 mm
BS EN 60603-9:1998, IEC 60603-9:1990. Connectors for frequencies below 3 MHz for use with printed boardsTwo-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)
BS EN 60604:1993, IEC 60604:1980. 'Topflash/Flipflash' photographic flash lamp array
BS EN 60609-1:2005. Hydraulic turbines, storage pumps and pump-turbines. Cavitation pitting evaluationEvaluation in reaction turbines, storage pumps and pump-turbines
BS EN 60609-2:1999. Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump turbinesEvaluation in Pelton turbines
BS EN 60613:2010. Electrical and loading characteristics of X-ray tube assemblies for medical diagnosis
BS EN 60617-10:1996, IEC 60617-10:1996. Graphical symbols for diagramsTelecommunications. Transmission
BS EN 60617-11:1997, IEC 60617-11:1996. Graphical symbols for diagramsArchitectural and topographical installation plans and diagrams
BS EN 60617-12:1999, IEC 60617-12:1997. Graphical symbols for diagramsBinary logic elements
BS EN 60617-13:1993, IEC 60617-13:1993. Graphical symbols for diagramsAnalogue elements
BS EN 60617-2:1996, IEC 60617-2:1996. Graphical symbols for diagramsSymbol elements, qualifying symbols and other symbols having general application
BS EN 60617-3:1996, IEC 60617-3:1996. Graphical symbols for diagramsConductors and connecting devices
BS EN 60617-4:1996, IEC 60617-4:1996. Graphical symbols for diagramsBasic passive components
BS EN 60617-5:1996, IEC 60617-5:1996. Graphical symbols for diagramsSemiconductors and electron tubes
BS EN 60617-6:1996, IEC 60617-6:1996. Graphical symbols for diagramsProduction and conversion of electrical energy
BS EN 60617-7:1996, IEC 60617-7:1996. Graphical symbols for diagramsSwitchgear, controlgear and protective devices
BS EN 60617-8:1996, IEC 60617-8:1996. Graphical symbols for diagramsMeasuring instruments, lamps and signalling devices
BS EN 60617-9:1996, IEC 60617-9:1996. Graphical symbols for diagramsTelecommunications. Switching and peripheral equipment
BS EN 60618:1999. Inductive voltage dividers
BS EN 60619:1993, IEC 60619:1993. Electrically operated food preparation appliances. Methods for measuring the performance
BS EN 60622:1996. Sealed nickel-cadmium prismatic rechargeable single cells
BS EN 60622:2003. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-cadmium prismatic rechargeable single cells
BS EN 60623:1996, IEC 60623:1990. Vented nickel-cadmium prismatic rechargeable single cells
BS EN 60623:2001, IEC 60623:2001. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Vented nickel-cadmium prismatic rechargeable single cells
BS EN 60626-1:1996, IEC 60626-1:1995. Combined flexible materials for electrical insulationDefinitions and general requirements
BS EN 60626-1:2012. Combined flexible materials for electrical insulationDefinitions and general requirements
BS EN 60626-2:1996, IEC 60626-2:1995. Combined flexible materials for electrical insulationMethods of test
BS EN 60626-2:2009. Combined flexible materials for electrical insulationMethods of test
BS EN 60626-3:1997, IEC 60626-3:1996. Combined flexible materials for electrical insulationSpecifications for individual materials
BS EN 60626-3:2008+A1:2012. Combined flexible materials for electrical insulation Specifications for individual materials
BS EN 60627:2001, IEC 60627:2001. Diagnostic X-ray imaging equipment. Characteristics of general purpose and mammographic anti-scatter grids
BS EN 60630:1998+A6:2009. Maximum lamp outlines for incandescent lamps
BS EN 60633:1999+A1:2009. Terminology for high-voltage direct current (HVDC) transmission
BS EN 60634:1995. Heat test source (H.T.S.) lamps for carrying out heating tests on luminaires
BS EN 60641-1:1996, IEC 60641-1:1979. Specification for pressboard and presspaper for electrical purposesDefinitions and general requirements
BS EN 60641-1:2008. Specification for pressboard and presspaper for electrical purposesDefinitions and general requirements
BS EN 60641-2:1996, IEC 60641-2:1979. Specification for pressboard and presspaper for electrical purposesMethods of test
BS EN 60641-2:2004. Pressboard and presspaper for electrical purposesMethods of tests
BS EN 60641-3-1:1994, IEC 60641-3-1:1992. Specification for pressboard and presspaper for electrical purposes. Specifications for individual materialsRequirements for pressboard, types B.0.1, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.6.1 and B.7.1
BS EN 60641-3-1:2008. Pressboard and presspaper for electrical purposesSpecifications for individual materials
BS EN 60641-3-2:1995, IEC 60641-3-2:1992. Specification for pressboard and presspaper for electrical purposes. Specifications for individual materialsRequirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3, P.6.1 and P.7.1
BS EN 60641-3-2:2008. Pressboard and presspaper for electrical purposesSpecifications for individual materials
BS EN 60644:1993, BS 5907:1980,IEC 60644:1979. Specification for high voltage fuse-links for motor circuit applications
BS EN 60644:2009. Specification for high-voltage fuse-links for motor circuit application
BS EN 60645-1:1995, IEC 60645-1:1992. AudiometersPure-tone audiometers
BS EN 60645-1:2001, IEC 60645-1:2001. AudiometersPure-tone audiometers
BS EN 60645-2:1997, IEC 60645-2:1993. AudiometersEquipment for speech audiometry
BS EN 60645-3:1995, IEC 60645-3:1994. AudiometersAuditory test signals of short duration for audiometric and neuro-otological purposes
BS EN 60645-3:2007. Electroacoustics. Audiometric equipmentTest signals of short duration
BS EN 60645-4:1995, IEC 60645-4:1994. AudiometersEquipment for extended high-frequency audiometry
BS EN 60645-5:2005. Electroacoustics. Audiometric equipmentInstruments for the measurement of aural acoustic impedance/admittance
BS EN 60645-6:2010. Electroacoustics. Audiometric equipmentInstruments for the measurement of otoacoustic emissions
BS EN 60645-7:2010. Electroacoustics. Audiometric equipmentInstruments for the measurement of auditory brainstem responses
BS EN 60646:1999. Test methods for crucible induction furnaces
BS EN 60651:1994, IEC 60651:1979. Specification for sound level meters
BS EN 60652:2004. Loading tests on overhead line structures
BS EN 60654-1:1993, IEC 60654-1:1993. Industrial-process measurement and control equipment. Operating conditions.Climatic conditions
BS EN 60654-2:1998, IEC 60654-2:1979. Operating conditions for industrial-process measurement and control equipmentPower
BS EN 60654-3:1998, IEC 60654-3:1983. Operating conditions for industrial-process measurement and control equipmentMechanical influences
BS EN 60654-4:1998, IEC 60654-4:1987. Operating conditions for industrial-process measurement and control equipmentCorrosive and erosive influences
BS EN 60660:2000, IEC 60660:1999. Insulators. Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV
BS EN 60661:2001, IEC 60661:1999. Methods for measuring the performance of electric household coffee makers
BS EN 60662:1993. Specification for high-pressure sodium vapour lamps
BS EN 60662:2012. High-pressure sodium vapour lamps. Performance specifications
BS EN 60664-1:2003. Insulation coordination for equipment within low-voltage systemsPrinciples, requirements and tests
BS EN 60664-1:2007. Insulation coordination for equipment within low-voltage systemsPrinciples, requirements and tests
BS EN 60664-3:2003+A1:2010. Insulation coordination for equipment within low-voltage systemsUse of coating, potting or moulding for protection against pollution
BS EN 60664-4:2006. Insulation coordination for equipment within low-voltage systemsConsideration of high-frequency voltage stress
BS EN 60664-5:2003. Insulation coordination for equipment within low-voltage systemsA comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
BS EN 60664-5:2007. Insulation coordination for equipment within low-voltage systemsComprehensive method for determining clearances and creepage distances equal to or less than 2 mm
BS EN 60666:2010. Detection and determination of specified additives in mineral insulating oils
BS EN 60669-1:1996, BS 3676-1:1996. Switches for household and similar fixed electrical installationsGeneral requirements
BS EN 60669-1:1999+A2:2008. Switches for household and similar fixed-electrical installationsGeneral requirements
BS EN 60669-2-1:1998. Switches for household and similar fixed electrical installations. Particular requirementsElectronic switches
BS EN 60669-2-1:2000. Switches for household and similar fixed electrical installations. Particular requirementsElectronic switches
BS EN 60669-2-1:2004+A12:2010. Switches for household and similar fixed electrical installationsParticular requirements. Electronic switches
BS EN 60669-2-2:1998, IEC 60669-2-2:1996. Switches for household and similar fixed electrical installationsParticular requirements. Remote-control switches (RCS)
BS EN 60669-2-2:2006. Switches for household and similar fixed electrical installationsParticular requirements. Electromagnetic remote-control switches (RCS)
BS EN 60669-2-3:1998, IEC 60669-2-3:1984. Switches for household and similar fixed electrical installations. Particular requirementsTime-delay switches (T.D.S.)
BS EN 60669-2-3:1999, IEC 60669-2-3:1997. Switches for household and similar fixed electrical installations. Particular requirementsTime-delay switches (TDS)
BS EN 60669-2-3:2006. Switches for household and similar fixed electrical installationsParticular requirements. Time delay switches (TDS)
BS EN 60669-2-4:2005. Switches for household and similar fixed electrical installationsParticular requirements
BS EN 60669-2-6:2012. Switches for household and similar fixed electrical installationsParticular requirements. Fireman's switches for exterior and interior signs and luminaires
BS EN 60670-1:2005+A1:2013. Boxes and enclosures for electrical accessories for household and similar fixed electrical installationsGeneral requirements
BS EN 60670-21:2007. Boxes and enclosures for electrical accessories for household and similar fixed electrical installationsParticular requirements for boxes and enclosures with provision for suspension means
BS EN 60670-22:2006. Boxes and enclosures for electrical accessories for household and similar fixed electrical installationsParticular requirements for connecting boxes and enclosures
BS EN 60670-23:2008. Boxes and enclosures for electrical accessories for household and similar fixed electrical installationsParticular requirements for floor boxes and enclosures
BS EN 60670-24:2013. Boxes and enclosures for electrical accessories for household and similar fixed electrical installationsParticular requirements for enclosures for housing protective devices and other power dissipating electrical equipment
BS EN 60671:2011. Nuclear power plants. Instrumentation and control systems important to safety. Surveillance testing
BS EN 60672-1:1996, IEC 60672-1:1995. Ceramic and glass insulating materialsDefinitions and classification
BS EN 60672-2:2000, IEC 60672-2:1999. Ceramic and glass insulating materialsMethods of test
BS EN 60672-3:1998, IEC 60672-3:1997. Ceramic and glass insulating materialsSpecifications for individual materials
BS EN 60674-1:1998. Specification for plastic films for electrical purposesDefinitions and general requirements
BS EN 60674-2:1998. Specification for plastic films for electrical purposesMethods of test
BS EN 60674-3-1:1998+A1:2011, IEC 60674-3-1:1998. Plastic films for electrical purposesSpecifications for individual materials
BS EN 60674-3-2:1998. Specification for plastic films for electrical purposes. Specifications for individual materialsRequirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation
BS EN 60674-3-3:1998. Specification for plastic films for electrical purposes. Specifications for individual materialsRequirements for polycarbonate (PC) films used for electrical insulation
BS EN 60674-3-4 to 6:1995, IEC 60674-3-4 to 6:1993. Specification for plastic films for electrical purposes. Specifications for individual materialsRequirements for polyimide films used for electrical insulation
BS EN 60674-3-7:1998, IEC 60674-3-7:1992. Specification for plastic films for electrical purposes. Specifications for individual materialsRequirements for fluoroethylene-propylene (FEP) films used for electrical insulation
BS EN 60674-3-8:2011. Plastic films for electrical purposesSpecifications for individual materials. Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation
BS EN 60675:1995. Household electric direct-acting room heaters. Methods for measuring performance
BS EN 60676:2002, IEC 60676:2002. Industrial electroheating equipment. Test methods for direct arc furnaces
BS EN 60676:2012. Industrial electroheating equipment. Test methods for direct arc furnaces
BS EN 60679-1:1998, IEC 60679-1:1997. Quartz crystal controlled oscillators of assessed qualityGeneric specification
BS EN 60679-1:2007. Quartz crystal controlled oscillators of assessed qualityGeneric specification
BS EN 60679-3:2002, IEC 60679-3:2001. Quartz crystal controlled oscillators of assessed qualityStandard outlines and lead connections
BS EN 60679-3:2013. Quartz crystal controlled oscillators of assessed qualityStandard outlines and lead connections
BS EN 60679-4:1998, IEC 60679-4:1997. Quartz crystal controlled oscillators of assessed qualitySectional specification. Capability approval
BS EN 60679-4-1:1998, IEC 60679-4-1:1998. Quartz crystal controlled oscillators of assessed quality.Blank detail specification. Capability approval
BS EN 60679-5:1998, IEC 60679-5:1998. Quartz crystal controlled oscillators of assessed qualitySectional specification. Qualification approval
BS EN 60679-5-1:1998, IEC 60679-5-1:1998. Quartz crystal controlled oscillators of assessed quality.Blank detail specification. Qualification approval
BS EN 60679-6:2011. Quartz crystal controlled oscillators of assessed qualityPhase jitter measurement method for quartz crystal oscillators and SAW oscillators. Application guidelines
BS EN 60682:1994, IEC 60682:1980. Method for measuring the pinch temperature of quartz-tungsten-halogen lamps
BS EN 60683:2012. Industrial electroheating equipment. Test methods for submerged-arc furnaces
BS EN 60684-1:1996, IEC 60684-1:1980. Specification for flexible insulating sleevingSpecification for general requirements
BS EN 60684-1:2003. Flexible insulating sleevingDefinitions and general requirements
BS EN 60684-2:1997, IEC 60684-2:1997. Flexible insulating sleevingMethods of test
BS EN 60684-2:2011. Flexible insulating sleevingMethods of test
BS EN 60684-3-100 to 105:2002, IEC 60684-3-100 to 105:2001. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingExtruded PVC sleeving
BS EN 60684-3-116 and 117:2003. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingExtruded polychloroprene. General purpose
BS EN 60684-3-116:2011. Flexible insulating sleevingSpecifications for individual types of sleeving. Sheets 116 and 117: Extruded polychloroprene, general purpose
BS EN 60684-3-121 to 124:2001, IEC 60684-3-121 to 124:2001. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingSpecifications for individual types of sleeving. Extruded silicone sleeving
BS EN 60684-3-123 and 124:1995, IEC 60684-3-123 and 124:1992. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingExtruded silicone sleeving, general purpose
BS EN 60684-3-136:1998, IEC 60684-3-136:1997. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingExtruded fluorosilicone sleeving. General purpose
BS EN 60684-3-145 to 147:2001. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingExtruded PTFE sleeving
BS EN 60684-3-151:1998, IEC 60684-3-151:1998. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingExtruded PVC/nitrile rubber. General purpose
BS EN 60684-3-165:2004. Flexible insulating sleeving. Specifications for individual types of sleeving Extruded Polyolefin, flame retarded, limited fire hazard sleeving
BS EN 60684-3-205:2011. Flexible insulating sleevingSpecifications for individual types of sleeving. Sheet 205: Heat-shrinkable chlorinated polyolefin sleeving, flame retarded, nominal shrink ratio 1,7:1 and 2:1
BS EN 60684-3-209:2003. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingHeat-shrinkable polyolefin sleeving, general purpose, flame retarded, shrink ratio 2:1
BS EN 60684-3-209:2010. Flexible insulating sleevingSpecifications for individual types of sleeving. Heat-shrinkable polyolefin sleeving, general purpose, flame retarded
BS EN 60684-3-211:1994, IEC 60684-3-211:1992. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingHeat-shrinkable sleeving, general purpose, semi-rigid polyolefin, shrink ratio 2:1
BS EN 60684-3-211:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingHeat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
BS EN 60684-3-211:2007. Flexible insulating sleevingSpecifications for individual types of sleeving
BS EN 60684-3-212:1998, IEC 60684-3-212:1998. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingHeat-shrinkable polyolefin sleeving, flame retarded, shrink ratio 2:1
BS EN 60684-3-212:2006. Flexible insulating sleevingSpecifications for individual types of sleeving
BS EN 60684-3-213:1999, IEC 60684-3-213:1998. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingHeat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 2:1
BS EN 60684-3-214:2005. Flexible insulating sleeving. Specifications for individual types of sleeving Heat-shrinkable, polyolefin sleeving, not flame retarded, shrink ratio 3:1. Thick and medium wall
BS EN 60684-3-216:2005. Flexible insulating sleevingSpecifications for individual types of sleeving
BS EN 60684-3-217:1998, IEC 60684-3-217:1998. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingHeat-shrinkable polyolefin sleeving, flame retarded, shrink ratio 3:1
BS EN 60684-3-218:1998, IEC 60684-3-218:1998. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingHeat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 3:1
BS EN 60684-3-228:1998, IEC 60684-3-228:1998. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingHeat-shrinkable semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1
BS EN 60684-3-228:2004. Flexible insulating sleevingSpecification requirements for individual types of sleeving
BS EN 60684-3-229:2003. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingHeat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1
BS EN 60684-3-233:1998, IEC 60684-3-233:1998. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingHeat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1
BS EN 60684-3-233:2006. Flexible insulating sleevingSpecifications for individual types of sleeving
BS EN 60684-3-240 to 243:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingHeat-shrinkable PTFE sleeving
BS EN 60684-3-246:1995, IEC 60684-3-246:1992. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingHeat-shrinkable sleeving, dual wall, not flame retarded, polyolefin
BS EN 60684-3-246:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingHeat-shrinkable polyolefin sleeving, dual-wall, not flame retarded
BS EN 60684-3-246:2007. Flexible insulating sleevingSpecifications for individual types of sleeving
BS EN 60684-3-247:2011. Flexible insulating sleevingSpecifications for individual types of sleeving. Sheet 247: Heat- shrinkable polyolefin sleeving, dual wall, not flame retarded, thick and medium wall
BS EN 60684-3-248:2007. Flexible insulating sleeving. Specifications for individual types of sleeving General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1
BS EN 60684-3-271:1998, IEC 60684-3-271:1998. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingHeat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1
BS EN 60684-3-271:2004. Flexible insulating sleevingSpecifications for individual types of sleeving
BS EN 60684-3-271:2011. Flexible insulating sleevingSpecifications for individual types of sleeving. Heat-shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1
BS EN 60684-3-272:1998, IEC 60684-3-272:1998. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingHeat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1, thin wall
BS EN 60684-3-280:2010. Flexible insulating sleeving. Specifications for individual types of sleevingHeat-shrinkable, polyolefin sleeving, anti-tracking
BS EN 60684-3-281:2010. Flexible insulating sleevingSpecifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving, semiconductive
BS EN 60684-3-282:2010. Flexible insulating sleevingSpecifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving. Stress control
BS EN 60684-3-283:2011. Flexible insulating sleevingSpecifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving, for bus-bar insulation
BS EN 60684-3-300:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingGlass textile fibre sleeving, braided, uncoated
BS EN 60684-3-320:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingPolyethylene terephthalate textile sleeving, lightly impregnated
BS EN 60684-3-340 to 342:1994, IEC 60684-3-340 to 342:1992. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingExpandable braided polyethylene terephthalate textile sleeving
BS EN 60684-3-340 to 342:2003. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingExpandable braided polyethylene terephthalate textile sleeving
BS EN 60684-3-343 to 345:1994, IEC 60684-3-343 to 345:1992. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingSheets. Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated
BS EN 60684-3-343 to 345:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingExpandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated
BS EN 60684-3-400 to 402:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingGlass textile sleeving with silicone elastomer coating
BS EN 60684-3-403 to 405:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingGlass textile sleeving with acrylic based coating
BS EN 60684-3-406 to 408:2003. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingGlass textile sleeving with PVC coating
BS EN 60684-3-409:1999, IEC 60684-3-409:1999. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingGlass textile sleeving with polyurethane (PUR)-based coating
BS EN 60684-3-420 to 422:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleevingPolyethylene terephthalate textile sleeving with acrylic based coating
BS EN 60687:1993, IEC 60687:1992. Specification for alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S)
BS EN 60688:1992. Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals
BS EN 60688:2013. Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals
BS EN 60689:2009. Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
BS EN 6069:2009. Aerospace series. Rivet, 100° reduced flush head, close tolerance. Inch series
BS EN 60691:1996. Thermal links. Requirements and application guide
BS EN 60691:2003+A2:2010. Thermal-links. Requirements and application guide
BS EN 60694:1997, IEC 60694:1996. Common specifications for high-voltage switchgear and controlgear standards
BS EN 60695-10-2:2003. Fire hazard testing. Abnormal heatBall pressure test
BS EN 60695-10-3:2002. Fire hazard testing. Abnormal heatMould stress relief distortion test
BS EN 60695-1-1:1996, IEC 60695-1-1:1995. Fire hazard testing. Guidance for assessing fire hazard of electrotechnical productsGeneral guidance
BS EN 60695-1-1:2000, IEC 60695-1-1:1999. Fire hazard testing. Guidance for assessing fire hazard of electrotechnical productsGeneral guidelines
BS EN 60695-1-10:2010. Fire hazard testingGuidance for assessing the fire hazard of electrotechnical products. General guidelines
BS EN 60695-1-11:2011. Fire hazard testingGuidance for assessing the fire hazard of electrotechnical products. Fire hazard assessment
BS EN 60695-11-10:1999, IEC 60695-11-10:1999. Fire hazard testing. Test flames50 W horizontal and vertical flame test methods
BS EN 60695-11-10:2013. Fire hazard testingTest flames. 50 W horizontal and vertical flame test methods
BS EN 60695-11-2:2003. Fire hazard testingTest flames. 1 kW nominal pre-mixed flame
BS EN 60695-11-20:1999, IEC 60695-11-20:1999. Fire hazard testing. Test flames500 W flame test methods
BS EN 60695-11-3:2012. Fire hazard testingTest flames. 500 W flames. Apparatus and confirmational test methods
BS EN 60695-11-4:2011. Fire hazard testingTest flames. 50 W flame. Apparatus and confirmational test method
BS EN 60695-11-5:2005. Fire hazard testingTest flames
BS EN 60695-1-30:2002. Fire hazard testing. Guidance for assessing fire hazard of electrotechnical productsUse of preselection testing procedures
BS EN 60695-1-30:2008. Fire hazard testingGuidance for assessing the fire hazard of electrotechnical products. Preselection testing process. General guidelines
BS EN 60695-2-1/0:1997, IEC 60695-2-1/0:1994. Fire hazard testing. Test methodsGlow-wire test methods. General
BS EN 60695-2-1/1:1997, IEC 60695-2-1/1:1994. Fire hazard testing. Test methodsGlow-wire end-product test and guidance
BS EN 60695-2-1/2:1996, IEC 60695-2-1/2:1994. Fire hazard testing. Test methodsGlow-wire flammability test on materials
BS EN 60695-2-1/3:1996, IEC 60695-2-1/3:1994. Fire hazard testing. Test methodsGlow-wire ignitability test on materials
BS EN 60695-2-10:2001, IEC 60695-2-10:2000. Fire hazard testing. Test methodsGlowing/hot-wire based test methods. Glow-wire apparatus and common test procedure
BS EN 60695-2-10:2013. Fire hazard testingGlowing/hot-wire based test methods. Glow-wire apparatus and common test procedure
BS EN 60695-2-11:2001, IEC 60695-2-11:2001. Fire hazard testing. Test methodsGlowing/hot-wire based test methods. Glow-wire flammability test method for end-products
BS EN 60695-2-12:2001, IEC 60695-2-12:2000. Fire hazard testing. Test methodsGlowing/hot-wire based test methods. Glow-wire flammability test method for materials
BS EN 60695-2-12:2010. Fire hazard testingGlowing/hot-wire based test methods. Glow-wire flammability index (GWFI) test method for materials
BS EN 60695-2-13:2001, IEC 60695-2-13:2000. Fire hazard testing. Test methodsGlowing/hot-wire based tests methods. Glow-wire ignitability test method for materials
BS EN 60695-2-13:2010. Fire hazard testingGlowing/hot-wire based test methods. Glow-wire ignition temperature (GWIT) test method for materials
BS EN 60695-2-2:1995, IEC 60695-2-2:1991. Fire hazard testing. Test methodsNeedle-flame test
BS EN 60695-2-4/0:1993, IEC 60695-2-4/0:1991. Fire hazard testingDiffusion type and premixed type flame test methods
BS EN 60695-2-4/1:1993, IEC 60695-2-4/1:1991. Fire hazard testing. Test methods1 kW nominal pre-mixed test flame and guidance
BS EN 60695-4:1996, IEC 60695-4:1993. Fire hazard testingTerminology concerning fire tests
BS EN 60695-4:2006. Fire hazard testingTerminology concerning fire tests for electrotechnical products
BS EN 60695-4:2012. Fire hazard testingTerminology concerning fire tests for electrotechnical products
BS EN 60695-5-1:1993. Fire hazard testing. Assessment of potential corrosion damage by fire effluentGeneral guidance
BS EN 60695-5-1:2003. Fire hazard testing. Assessment of potential corrosion damage by fire effluentGeneral guidance
BS EN 60695-6-1:2001, IEC 60695-6-1:2001. Fire hazard testing. Smoke opacityGeneral guidance
BS EN 60695-6-1:2005+A1:2010. Fire hazard testingSmoke obscuration. General guidance
BS EN 60695-6-2:2011. Fire hazard testingSmoke obscuration. Summary and relevance of test methods
BS EN 60695-7-1:1996, IEC 60695-7-1:1993. Fire hazard testing. Guidance on the minimization of toxic hazards due to fires involving electrotechnical productsGeneral
BS EN 60695-7-1:2004. Fire hazard testingToxicity of fire effluent
BS EN 60695-7-1:2010. Fire hazard testingToxicity of fire effluent. General guidance
BS EN 60695-7-2:2011. Fire hazard testingToxicity of fire effluent. Summary and relevance of test methods
BS EN 60695-7-3:2011. Fire hazard testingToxicity of fire effluent. Use and interpretation of test results
BS EN 60695-8-1:2001, IEC 60695-8-1:2001. Fire hazard testing. Heat releaseGeneral guidance
BS EN 60695-8-1:2008. Fire hazard testingHeat release. General guidance
BS EN 60695-9-1:1999, IEC 60695-9-1:1998. Fire hazard testing. Surface spread of flameGeneral guidance
BS EN 60695-9-1:2005. Fire hazard testingSurface spread of flame
BS EN 60695-9-1:2013. Fire hazard testingSurface spread of flame. General guidance
BS EN 607:1996. Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing
BS EN 607:2004. Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing
BS EN 60700-1:1998+A2:2008, IEC 60700-1:1998. Thyristor valves for high-voltage direct current (HVDC) power transmissionElectrical testing
BS EN 60702-1:2002, IEC 60702-1:2002. Mineral insulated cables and their terminations with a rated voltage not exceeding 750 VCables
BS EN 60702-2:2002, IEC 60702-2:2002. Mineral insulated cables and their terminations with a rated voltage not exceeding 750 VTerminations
BS EN 60703:2009. Test methods for electroheating installations with electron guns
BS EN 60704-1:1995. Household and similar electrical appliances. Test code for the determination of airborne acoustical noiseGeneral requirements
BS EN 60704-1:1997, IEC 60704-1:1997. Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliancesGeneral requirements
BS EN 60704-1:2010+A11:2012. Household and similar electrical appliances. Test code for thedetermination of airborne noiseGeneral requirements
BS EN 60704-2-1:1995. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise.Vacuum cleaners
BS EN 60704-2-1:2001. Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirementsParticular requirements for vacuum cleaners
BS EN 60704-2-10:2004. Household and similar electrical appliances. Test code for the determination of airborne acoustical noiseParticular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these
BS EN 60704-2-10:2011. Household and similar electrical appliances. Test code for the determination of airborne acoustical noiseParticular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these
BS EN 60704-2-11:1999, IEC 60704-2-11:1998. Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirementsElectrically operated food preparation appliances
BS EN 60704-2-13:2000+A2:2008. Household and similar electrical appliances. Test code for the determination of airborne acoustical noiseParticular requirements for range hoods
BS EN 60704-2-13:2011. Household and similar electrical appliances. Test code for the determination of airborne acoustical noiseParticular requirements for range hoods
BS EN 60704-2-14:2013. Household and similar electrical appliances. Test code for the determination of airborne acoustical noiseParticular requirements for refrigerators, frozen-food storage cabinets and food freezers
BS EN 60704-2-2:1995, IEC 60704-2-2:1985. Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirementsForced draught convection heaters
BS EN 60704-2-2:2010. Household and similar appliances. Test code for the determination of airborne acoustical noiseParticular requirements for fan heaters
BS EN 60704-2-3:1995. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise.Particular requirements for dishwashers
BS EN 60704-2-3:2002, IEC 60704-2-3:2001. Household and similar electrical appliances. Test code for the determination of airborne acoustical noiseParticular requirements for dishwashers
BS EN 60704-2-4:1995, IEC 60704-2-4:1989. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise.Washing machines and spin extractors
BS EN 60704-2-4:2001, IEC 60704-2-4:2001. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise.Particular requirements for washing machines and spin extractors
BS EN 60704-2-4:2012. Household and similar electrical appliances. Test code for the determination of airborne acoustical noiseParticular requirements for washing machines and spin extractors
BS EN 60704-2-5:1995. Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliancesRoom heaters of the storage type
BS EN 60704-2-5:2005. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
BS EN 60704-2-6:1995, IEC 60704-2-6:1994. Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirementsTumble-dryers
BS EN 60704-2-6:2004. Household and similar electrical appliances. Test code for the determination of airborne acoustical noiseParticular requirements for tumble dryers
BS EN 60704-2-6:2012. Household and similar electrical appliances. Test code for the determination of airborne acoustical noiseParticular requirements for tumble dryers
BS EN 60704-2-7:1998. Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirementsParticular requirements for fans
BS EN 60704-2-8:1997, IEC 60704-2-8:1997. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise.Particular requirements for electric shavers
BS EN 60704-2-9:2003. Household and similar electrical appliances. Test code for the determination of airborne acoustical noiseParticular requirements for electric hair care appliances
BS EN 60704-3:1995, IEC 60704-3:1992. Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliancesProcedure for determining and verifying declared noise emission values
BS EN 60704-3:2006. Household and similar electrical appliances. Test code for the determination of airborne acoustical noiseProcedure for determining and verifying declared noise emission values
BS EN 60705:1995, IEC 60705:1988. Methods for measuring the performance of microwave ovens for household and similar purposes
BS EN 60705:1999, IEC 60705:1999. Household microwave ovens. Methods for measuring performance
BS EN 60705:2012. Household microwave ovens. Methods for measuring performance
BS EN 60706-2:2006. Maintainability of equipmentMaintainability requirements and studies during the design and development phase
BS EN 60706-3:2006. Maintainability of equipmentVerification and collection, analysis and presentation of data
BS EN 60706-5:2007. Maintainability of equipmentTestability and diagnostic testing
BS EN 60707:1999, IEC 60707:1999. Flammability of solid non-metallic materials when exposed to flame sources. List of test methods
BS EN 60708:2005. Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
BS EN 60709:2010. Nuclear power plants. Instrumentation and control systems important to safety. Separation
BS EN 60712:1996, IEC 60712:1993. Helical-scan video-tape cassette system using 19 mm (3/4 in) magnetic tape, known as U-format
BS EN 60715:2001, IEC 60715:1981+A1:1995. Dimensions of low-voltage switchgear and controlgear. Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations
BS EN 60717:2012. Method for the determination of the space required by capacitors and resistors with unidirectional terminations
BS EN 60719:1993, IEC 60719:1992. Calculation for the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V
BS EN 6072:2010. Aerospace series. Metallic materials. Test methods. Constant amplitude fatigue testing
BS EN 60721-1:1996, IEC 60721-1:1996. Classification of environmental conditionsEnvironmental parameters and their severities
BS EN 60721-2-2:2013. Classification of environmental conditionsEnvironmental conditions appearing in nature. Precipitation and wind
BS EN 60721-3-0:1993, IEC 60721-3-0:1984. Classification of environmental conditions. Classification of groups of environmental parameters and their severitiesIntroduction
BS EN 60721-3-1:1993, IEC 60721-3-1:1987. Classification of environmental conditions. Classification of groups of environmental parameters and their severitiesClassification of environmental conditions. Classification of groups of environmental parameters and their severities. Storage
BS EN 60721-3-1:1997, IEC 60721-3-1:1997. Classification of environmental conditions. Classification of groups of environmental parameters and their severitiesStorage
BS EN 60721-3-2:1993, IEC 60721-3-2:1985. Classification of environmental conditions. Classification of groups of environmental parameters and their severitiesClassification of environmental conditions. Classification of groups of environmental parameters and their severities. Transportation
BS EN 60721-3-2:1997, IEC 60721-3-2:1997. Classification of environmental conditions. Classification of groups of environmental parameters and their severitiesTransportation
BS EN 60721-3-3:1993, IEC 60721-3-3:1987. Classification of environmental conditions. Classification of groups of environmental parameters and their severitiesStationary use at weatherprotected locations
BS EN 60721-3-3:1995, IEC 60721-3-3:1994. Classification of environmental conditions. Classification of groups of environmental parameters and their severitiesStationary use at weatherprotected locations
BS EN 60721-3-4:1993, IEC 60721-3-4:1987. Classification of environmental conditions. Classification of groups of environmental parameters and their severitiesStationary use at non-weatherprotected locations
BS EN 60721-3-4:1995, IEC 60721-3-4:1995. Classification of environmental conditions. Classification of groups of environmental parameters and their severitiesStationary use at non-weatherprotected locations
BS EN 60721-3-5:1993. Classification of environmental conditions. Classification of groups of environmental parameters and their severitiesGround vehicle installations
BS EN 60721-3-5:1997, IEC 60721-3-5:1997. Classification of environmental conditions. Classification of groups of environmental parameters and their severitiesGround vehicle installations
BS EN 60721-3-6:1993, IEC 60721-3-6:1987. Classification of environmental conditions. Classification of groups of environmental parameters and their severitiesShip environment
BS EN 60721-3-7:1993, IEC 60721-3-7:1987. Classification of environmental conditions. Classification of groups of environmental parameters and their severitiesPortable and non-stationary use
BS EN 60721-3-7:1996, IEC 60721-3-7:1995. Classification of environmental conditions. Classification of groups of environmental parameters and their severitiesPortable and non-stationary use
BS EN 60721-3-9:1993, IEC 60721-3-9:1993. Classification of environmental conditions. Classification of groups of environmental parameters and their severitiesMicroclimates inside products
BS EN 60726:2003. Dry-type power transformers
BS EN 60728-1:2008. Cable networks for television signals, sound signals and interactive servicesSystem performance of forward paths
BS EN 60728-10:2006. Cable networks for television signals, sound signals and interactive servicesSystem performance for return paths
BS EN 60728-11:2005. Cable networks for television signals, sound signals and interactive servicesSafety
BS EN 60728-1-1:2010
BS EN 60728-1-1:2010. Cable networks for television signals, sound signals and interactive servicesRF cabling for two way home networks
BS EN 60728-11:2010. Cable networks for television signals, sound signals and interactive servicesSafety
BS EN 60728-1-2:2009. Cable networks for television signals, sound signals and interactive servicesPerformance requirements for signals delivered at the system outlet in operation
BS EN 60728-13:2010. Cable networks for television signals, sound signals and interactive servicesOptical systems for broadcast signal transmissions
BS EN 60728-13-1:2012. Cable networks for television signals, sound signals and interactive services Bandwidth expansion for broadcast signal over FTTH system
BS EN 60728-3:2006. Cable networks for television signals, sound signals and interactive servicesActive wideband equipment for coaxial cable networks
BS EN 60728-3:2011. Cable networks for television signals, sound signals and interactive servicesActive wideband equipment for cable networks
BS EN 60728-3-1:2012. Cable networks for television signals, sound signals and interactive servicesMethods of measurement of non-linearity for full digital channel load with DVB-C signals
BS EN 60728-4:2008. Cable networks for television signals, sound signals and interactive servicesPassive wideband equipment for coaxial cable networks
BS EN 60728-5:2008. Cable networks for television signals, sound signals and interactive servicesHeadend equipment
BS EN 60728-6:2003. Cable networks for television signals, sound signals and interactive servicesOptical equipment
BS EN 60728-6:2011. Cable networks for television signals, sound signals and interactive servicesOptical equipment
BS EN 60728-7-1:2005. Cable networks for television signals, sound signals and interactive servicesHybrid fibre coax outside plant status monitoring
BS EN 60728-7-2:2005. Cable networks for television signals, sound signals and interactive services. Hybrid fibre coax outside plant status monitoringMedia access control (MAC) layer specification
BS EN 60728-7-3:2005. Cable networks for television signals, sound signals and interactive services. Hybrid fibre coax outside plant status monitoringPower supply to transponder interface bus (PSTIB). Specification
BS EN 60728-7-3:2009. Cable networks for television signals, sound signals and interactive servicesHybrid fibre coax outside plant status monitoring. Power supply to transponder interface bus (PSTIB)
BS EN 60730-1:1992. Specification for automatic electrical controls for household and similar useGeneral requirements
BS EN 60730-1:1995. Automatic electrical controls for household and similar useGeneral requirements
BS EN 60730-1:2000+A2:2008. Automatic electrical controls for household and similar useGeneral requirements
BS EN 60730-1:2011. Automatic electrical controls for household and similar useGeneral requirements
BS EN 60730-2.8:1995. Specification for automatic electrical controls for household and similar use. Particular requirementsElectrically operated water valves, including mechanical requirements
BS EN 60730-2-1:1992. Specification for automatic electrical controls for household and similar use. Particular requirementsElectrical controls for electrical household appliances
BS EN 60730-2-1:1997. Specification for automatic electrical controls for household and similar use. Particular requirementsElectrical controls for electrical household appliances
BS EN 60730-2-10:1995. Specification for automatic electrical controls for household and similar use. Particular requirementsMotor starting relays
BS EN 60730-2-10:2007. Automatic electrical controls for household and similar useParticular requirements for motor-starting relays
BS EN 60730-2-11:1994, IEC 60730-2-11:1993. Specification for automatic electrical controls for household and similar use. Particular requirementsEnergy regulators
BS EN 60730-2-11:2008. Automatic electrical controls for household and similar useParticular requirements for energy regulators
BS EN 60730-2-12:1994, IEC 60730-2-12:1993. Specification for automatic electrical controls for household and similar use. Particular requirementsElectrically operated door locks
BS EN 60730-2-12:2006. Automatic electrical controls for household and similar useParticular requirements for electrically operated door locks
BS EN 60730-2-13:1998, IEC 60730-2-13:1995. Automatic electrical controls for household and similar useParticular requirements for humidity sensing controls
BS EN 60730-2-13:2008. Automatic electrical controls for household and similar useParticular requirements for humidity sensing controls
BS EN 60730-2-14:1997+A2:2008. Automatic electrical controls for household and similar useParticular requirements for electric actuators
BS EN 60730-2-15:1996, IEC 60730-2-15:1994. Automatic electrical controls for household and similar useParticular requirements for automatic electrical water level sensing controls of the float or electrode-sensor type used in boiler applications
BS EN 60730-2-15:2010. Automatic electrical controls for household and similar useParticular requirements for automatic electrical air flow, water flow and water level sensing controls
BS EN 60730-2-16:1998. Automatic electrical controls for household and similar use Particular requirements for automatic electrical water level controls of the float type for household and similar applications
BS EN 60730-2-18:1999, IEC 60730-2-18:1997. Automatic electrical controls for household and similar useParticular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements
BS EN 60730-2-19:2002+A2:2008. Automatic electric controls for household and similar useParticular requirements for electrically operated oil valves, including mechanical requirements
BS EN 60730-2-2:1992. Specification for automatic electrical controls for household and similar use. Particular requirementsThermal motor protectors
BS EN 60730-2-2:2002. Automatic controls for household and similar useParticular requirements for thermal motor protectors
BS EN 60730-2-3:1992. Automatic electrical controls for household and similar useParticular requirements for thermal protectors for ballasts for tubular fluorescent lamps
BS EN 60730-2-3:2007. Automatic electrical controls for household and similar useParticular requirements for thermal protectors for ballasts for tubular fluorescent lamps
BS EN 60730-2-4:1993. Specification for automatic electrical controls for household and similar use. Particular requirementsThermal motor protectors for motor-compressors of hermetic and semi-hermetic type
BS EN 60730-2-4:2007. Automatic electrical controls for household and similar useParticular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type
BS EN 60730-2-5:1992. Specification for automatic electrical controls for household and similar use. Particular requirementsAutomatic electrical burner control systems
BS EN 60730-2-5:1995, IEC 60730-2-5:1993. Specification for automatic electrical controls for household and similar use. Particular requirementsAutomatic electrical burner control systems
BS EN 60730-2-5:2002+A2:2010. Automatic electrical controls for household and similar useParticular requirements for automatic electrical burner control systems
BS EN 60730-2-6:1995. Specification for automatic electrical controls for household and similar use. Particular requirementsAutomatic electrical pressure sensing controls including mechanical requirements
BS EN 60730-2-6:2008. Automatic electrical controls for household and similar useParticular requirements for automatic electrical pressure sensing controls including mechanical requirements
BS EN 60730-2-7:1992. Specification for automatic electrical controls for household and similar use. Particular requirementsTimers and time switches
BS EN 60730-2-7:2010. Automatic electrical controls for household and similar useParticular requirements for timers and time switches
BS EN 60730-2-8:1995. Specification for automatic electrical controls for household and similar use. Particular requirementsElectrically operated water valves, including mechanical requirements
BS EN 60730-2-8:2002. Specification for automatic electrical controls for household and similar use. Particular requirementsParticular requirements for electrically operated water valves, including mechanical requirements
BS EN 60730-2-9:1995. Specification for automatic electrical controls for household and similar use. Particular requirementsTemperature sensing controls
BS EN 60730-2-9:2002. Automatic electrical controls for household and similar useParticular requirements for temperature sensing controls
BS EN 60730-2-9:2010. Automatic electrical controls for household and similar useParticular requirements for temperature sensing controls
BS EN 60731:1997, IEC 60731:1997. Medical electrical equipment. Dosimeters with ionization chambers as used in radiotherapy
BS EN 60731:2012. Medical electrical equipment. Dosimeters with ionization chambers as used in radiotherapy
BS EN 60734:1993, IEC 60734:1993. Specification for hard water to be used for testing the performance of some household electrical appliances
BS EN 60734:2003. Household electrical appliances. Performance. Hard water for testing
BS EN 60734:2012. Household electrical appliances. Performance. Water for testing
BS EN 60735:1992. Methods for measurement of video tape properties
BS EN 60738-1:1999, IEC 60738-1:1998
BS EN 60738-1:1999, IEC 60738-1:1998. Thermistors. Directly heated positive step-function temperature coefficientGeneric specification
BS EN 60738-1:1999. Thermistors. Directly heated positive temperature coefficientGeneric specification
BS EN 60738-1:2006+A1:2009. Thermistors. Directly heated positive temperature coefficientGeneric specification
BS EN 60738-1-1:1999, IEC 60738-1-1:1998
BS EN 60738-1-1:1999, IEC 60738-1-1:1998. Thermistors. Directly heated positive step-function temperature coefficient.Blank detail specification. Current limiting application. Assessment level EZ
BS EN 60738-1-1:1999. Thermistors. Directly heated positive step-function temperature coefficientBlank detail specification. Current limiting application. Assessment level EZ
BS EN 60738-1-1:2008. Thermistors. Directly heated positive step-function temperature coefficientBlank detail specification. Current limiting application. Assessment level EZ
BS EN 60738-1-2:1999, IEC 60738-1-2:1998
BS EN 60738-1-2:1999, IEC 60738-1-2:1998. Thermistors. Directly heated positive step-function temperature coefficient.Blank detail specification. Heating element application. Assessment level EZ
BS EN 60738-1-2:1999. Thermistors. Directly heated positive step-function temperature coefficientBlank detail specification. Heating element application. Assessment level EZ
BS EN 60738-1-2:2008. Thermistors. Directly heated positive step-function temperature coefficientBlank detail specification. Heating element application. Assessment level EZ
BS EN 60738-1-3:1999, IEC 60738-1-3:1998
BS EN 60738-1-3:1999, IEC 60738-1-3:1998. Thermistors. Directly heated positive step-function temperature coefficient.Blank detail specification. Inrush current application. Assessment level EZ
BS EN 60738-1-3:1999. Thermistors. Directly heated positive step-function temperature coefficientBlank detail specification. Inrush current application. Assessment level EZ
BS EN 60738-1-3:2008. Thermistors. Directly heated positive step-function temperature coefficientBlank detail specification. Inrush current application. Assessment level EZ
BS EN 60738-1-4:1999, IEC 60738-1-4:1998
BS EN 60738-1-4:1999, IEC 60738-1-4:1998. Thermistors. Directly heated positive step-function temperature coefficient.Blank detail specification. Sensing application. Assessment level EZ
BS EN 60738-1-4:1999. Thermistors. Directly heated positive step-function temperature coefficientBlank detail specification. Sensing application. Assessment level EZ
BS EN 60738-1-4:2008. Thermistors. Directly heated positive step-function temperature coefficientBlank detail specification. Sensing application. Assessment level EZ
BS EN 60740-1:2005. Laminations for transformers and inductorsMechanical and electrical characteristics
BS EN 60742:1996, BS 3535-1:1996. Isolating transformers and safety isolating transformers. Requirements
BS EN 60743:1997, IEC 60743:1983. Terminology for tools and equipment to be used in live working
BS EN 60743:2001+A1:2008. Live working. Terminology for tools, equipment and devices
BS EN 60745-1:2003. Hand-held motor-operated electric tools. SafetyGeneral requirements
BS EN 60745-1:2006. Hand-held motor-operated electric tools. SafetyGeneral requirements
BS EN 60745-1:2009. Hand-held motor-operated electric tools. SafetyGeneral requirements
BS EN 60745-1:2009+A11:2010. Hand-held motor-operated electric tools. SafetyGeneral requirements
BS EN 60745-2-1:2003+A12:2009. Hand-held motor-operated electric tools. SafetyParticular requirements for drills and impact drills
BS EN 60745-2-1:2010. Hand-held motor-operated electric tools. SafetyParticular requirements for drills and impact drills
BS EN 60745-2-11:2010. Hand-held motor-operated electric tools. SafetyParticular requirements for reciprocating saws (jig and sabre saws)
BS EN 60745-2-12:2003+A1:2009. Hand-held motor-operated electric tools. SafetyParticular requirements for concrete vibrators
BS EN 60745-2-12:2009. Hand-held motor-operated electric tools. SafetyParticular requirements for concrete vibrators
BS EN 60745-2-13:2007. Hand-held motor-operated electric tools. SafetyParticular requirements for chain saws.
BS EN 60745-2-13:2009+A1:2011. Hand-held motor-operated electric tools. SafetyParticular requirements for chain saws
BS EN 60745-2-14:2003. Hand-held motor-operated electric tools. SafetyParticular requirements for planers
BS EN 60745-2-14:2009+A2:2010. Hand-held motor-operated electric tools. SafetyParticular requirements for planers
BS EN 60745-2-15:2006. Hand-held motor-operated electric tools. SafetyParticular requirements for hedge trimmers
BS EN 60745-2-15:2009+A1:2010. Hand-held motor-operated electric tools. SafetyParticular requirements for hedge trimmers
BS EN 60745-2-16:2010. Hand-held motor-operated electric tools. SafetyParticular requirements for tackers
BS EN 60745-2-17:2003. Hand-held motor-operated electric tools. SafetyParticular requirements for routers and trimmers
BS EN 60745-2-17:2010. Hand-held motor-operated electric tools. SafetyParticular requirements for routers and trimmers
BS EN 60745-2-18:2004+A1:2008. Hand-held motor-operated electric tools. SafetyParticular requirements for strapping tools
BS EN 60745-2-18:2009. Hand-held motor-operated electric tools. SafetyParticular requirements for strapping tools
BS EN 60745-2-19:2005. Hand-held motor-operated electric tools. SafetyParticular requirements for jointers
BS EN 60745-2-19:2009+A1:2010. Hand-held motor-operated electric tools. SafetyParticular requirements for jointers
BS EN 60745-2-2:2003+A12:2009. Hand-held motor-operated electric tools. SafetyParticular requirements for screwdrivers and impact wrenches
BS EN 60745-2-2:2010. Hand-held motor-operated electric tools. SafetyParticular requirements for screwdrivers and impact wrenches
BS EN 60745-2-20:2003+A1:2009. Hand-held motor-operated electric tools. SafetyParticular requirements for band saws
BS EN 60745-2-20:2009. Hand-held motor-operated electric tools. SafetyParticular requirements for band saws
BS EN 60745-2-21:2007. Hand-held motor-operated electric tools. SafetyParticular requirements for drain cleaners
BS EN 60745-2-21:2009+A1:2010. Hand-held motor-operated electric tools. SafetyParticular requirements for drain cleaners
BS EN 60745-2-22:2011+A11:2013. Hand-held motor-operated electric tools. SafetyParticular requirements for cut-off machines
BS EN 60745-2-23:2013. Hand-held motor-operated electric tools. SafetyParticular requirements for die grinders and small rotary tools
BS EN 60745-2-3:2007. Hand-held motor-operated electric tools. SafetyParticular requirements for grinders, polishers and disk-type sanders
BS EN 60745-2-3:2011+A2:2013. Hand-held motor-operated electric tools. SafetyParticular requirements for grinders, polishers and disk-type sanders
BS EN 60745-2-4:2003+A1:2009. Hand-held motor-operated electric tools. SafetyParticular requirements for sanders and polishers other than disk type
BS EN 60745-2-4:2009+A11:2011. Hand-held motor-operated electric tools. SafetyParticular requirements for sanders and polishers other than disk type
BS EN 60745-2-5:2003. Hand-held motor-operated electric tools. SafetyParticular requirements for circular saws
BS EN 60745-2-5:2007+A11:2009. Hand-held motor-operated electric tools. SafetyParticular requirements for circular saws
BS EN 60745-2-5:2010. Hand-held motor-operated electric tools. SafetyParticular requirements for circular saws
BS EN 60745-2-6:2003+A12:2009. Hand-held motor-operated electric tools. SafetyParticular requirements for hammers
BS EN 60745-2-6:2010. Hand-held motor-operated electric tools. SafetyParticular requirements for hammers
BS EN 60745-2-8:2003+A1:2009. Hand-held motor-operated electric tools. SafetyParticular requirements for shears and nibblers
BS EN 60745-2-8:2009. Hand-held motor-operated electric tools. SafetyParticular requirements for shears and nibblers
BS EN 60745-2-9:2003+A1:2008. Hand-held motor-operated electric tools. SafetyParticular requirements for tappers
BS EN 60745-2-9:2009. Hand-held motor-operated electric tools. SafetyParticular requirements for tappers
BS EN 60746-1:2003. Expression of performance of electrochemical analyzersGeneral
BS EN 60746-2:2003. Expression of performance of electrochemical analyzerspH value
BS EN 60746-3:2002. Expression of performance of electrochemical analyzersElectrolytic conductivity
BS EN 60747-15:2004. Discrete semiconductor devicesIsolated power semiconductor devices
BS EN 60747-15:2012. Semiconductor devices. Discrete devicesIsolated power semiconductor devices
BS EN 60747-16-1:2002+A1:2007. Semiconductor devicesMicrowave integrated circuits. Amplifiers
BS EN 60747-16-10:2004. Semiconductor devicesTechnology Approval Schedule (TAS) for monolithic microwave integrated circuits
BS EN 60747-16-3:2002+A1:2009. Semiconductor devicesMicrowave integrated circuits. Frequency converters
BS EN 60747-16-4:2004+A1:2011. Semiconductor devicesMicrowave integrated circuits. Switches
BS EN 60747-16-5:2013. Semiconductor devicesMicrowave integrated circuits. Oscillators
BS EN 60747-5-1:2001. Discrete semiconductor devices and integrated circuits. Optoelectronic devicesGeneral
BS EN 60747-5-2:2001. Discrete semiconductor devices and integrated circuits. Optoelectronic devicesEssential ratings and characteristics
BS EN 60747-5-3:2001. Discrete semiconductor devices and integrated circuits. Optoelectronic devicesMeasuring methods
BS EN 60747-5-5:2011. Semiconductor devices. Discrete devicesOptoelectronic devices. Photocouplers
BS EN 60749:1999, IEC 60749:1996. Semiconductor devices. Mechanical and climatic test methods
BS EN 60749-1:2003. Semiconductor devices. Mechanical and climatic test methodsGeneral
BS EN 60749-10:2002. Semiconductor devices. Mechanical and climatic test methodsMechanical shock
BS EN 60749-11:2002. Semiconductor devices. Mechanical and climatic test methodsRapid change of temperature. Two-fluid-bath method
BS EN 60749-12:2002. Semiconductor devices. Mechanical and climatic test methodsVibration, variable frequency
BS EN 60749-13:2002. Semiconductor devices. Mechanical and climatic test methodsSalt atmosphere
BS EN 60749-14:2003. Semiconductor devices. Mechanical and climatic test methodsRobustness of terminations (lead integrity)
BS EN 60749-15:2003. Semiconductor devices. Mechanical and climatic test methodsResistance to soldering temperature for through-hole mounted devices
BS EN 60749-15:2010. Semiconductor devices. Mechanical and climatic test methodsResistance to soldering temperature for through-hole mounted devices
BS EN 60749-16:2003. Semiconductor devices. Mechanical and climatic test methodsParticle impact noise detection (PIND)
BS EN 60749-17:2003. Semiconductor devices. Mechanical and climatic test methodsNeutron irradiation
BS EN 60749-18:2003. Semiconductor devices. Mechanical and climatic test methodsIonizing radiation (total dose)
BS EN 60749-19:2003+A1:2010. Semiconductor devices. Mechanical and climatic test methodsDie shear strength
BS EN 60749-2:2002. Semiconductor devices. Mechanical and climatic test methodsLow air pressure
BS EN 60749-20:2003. Semiconductor devices. Mechanical and climatic test methodsResistance of plastic-encapsulated SMDs to the combined effect of moisture and soldering heat
BS EN 60749-20:2009. Semiconductor devices. Mechanical and climatic test methodsResistance of plastic encapsulated SMDs to the combined effect of moisture and soldering heat
BS EN 60749-20-1:2009. Semiconductor devices. Mechanical and climatic test methodsHandling, packing, labelling and shipping of surface-mount devices sensitive to the combined effect of moisture and soldering heat
BS EN 60749-21:2005. Semiconductor devices. Mechanical and climatic test methodsSolderability
BS EN 60749-21:2011. Semiconductor devices. Mechanical and climatic test methodsSolderability
BS EN 60749-22:2003. Semiconductor devices. Mechanical and climatic test methodsBond strength
BS EN 60749-23:2004+A1:2011. Semiconductor devices. Mechanical and climatic test methodsHigh temperature operating life
BS EN 60749-24:2004. Semiconductor devices. Mechanical and climatic test methodsAccelerated moisture resistance. Unbiased HAST
BS EN 60749-25:2003. Semiconductor devices. Mechanical and climatic test methodsTemperature cycling
BS EN 60749-26:2006. Semiconductor devices. Mechanical and climatic test methodsElectrostatic discharge (ESD) sensitivity testing. Human body model (HBM)
BS EN 60749-27:2006+A1:2012. Semiconductor devices. Mechanical and climatic test methodsElectrostatic discharge (ESD) sensitivity testing. Machine model (MM)
BS EN 60749-29:2003. Semiconductor devices. Mechanical and climatic test methodsLatch-up test
BS EN 60749-29:2011. Semiconductor devices. Mechanical and climatic test methodsLatch-up test
BS EN 60749-3:2002. Semiconductor devices. Mechanical and climatic test methodsExternal visual examination
BS EN 60749-30:2005+A1:2011. Semiconductor devices. Mechanical and climatic test methodsPreconditioning of non-hermetic surface mount devices prior to reliability testing
BS EN 60749-31:2003. Semiconductor devices. Mechanical and climatic test methodsFlammability of plastic-encapsulated devices (internally induced)
BS EN 60749-32:2003+A1:2010. Semiconductor devices. Mechanical and climatic test methodsFlammability of plastic-encapsulated devices (externally induced)
BS EN 60749-33:2004. Semiconductor devices. Mechanical and climatic test methodsAccelerated moisture resistance. Unbiased autoclave
BS EN 60749-34:2004. Semiconductor devices. Mechanical and climatic test methodsPower cycling
BS EN 60749-34:2010. Semiconductor devices. Mechanical and climatic test methodsPower cycling
BS EN 60749-35:2006. Semiconductor devices. Mechanical and climatic test methodsAcoustic microscopy for plastic encapsulated electronic components
BS EN 60749-36:2003. Semiconductor devices. Mechanical and climatic test methodsAcceleration, steady state
BS EN 60749-37:2008. Semiconductor devices. Mechanical and climatic test methodsBoard level drop test method using an accelerometer
BS EN 60749-38:2008. Semiconductor devices. Mechanical and climatic test methodsSoft error test method for semiconductor devices with memory
BS EN 60749-39:2006. Semiconductor devices. Mechanical and climatic test methodsMeasurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
BS EN 60749-4:2002. Semiconductor devices. Mechanical and climatic test methodsDamp heat, steady state, highly accelerated stress test (HAST)
BS EN 60749-40:2011. Semiconductor devices. Mechanical and climatic test methodsBoard level drop test method using a strain gauge
BS EN 60749-5:2003. Semiconductor devices. Mechanical and climatic test methodsSteady-state temperature humidity bias life test
BS EN 60749-6:2002. Semiconductor devices. Mechanical and climatic test methodsStorage at high temperature
BS EN 60749-7:2002. Semiconductor devices. Mechanical and climatic test methodsInternal moisture content measurement and the analysis of other residual gases
BS EN 60749-7:2011. Semiconductor devices. Mechanical and climatic test methodsInternal moisture content measurement and the analysis of other residual gases
BS EN 60749-8:2003. Semiconductor devices. Mechanical and climatic test methodsSealing
BS EN 60749-9:2002. Semiconductor devices. Mechanical and climatic test methodsPermanence of marking
BS EN 60751:1996, IEC 60751:1983. Industrial platinum resistance thermometer sensors
BS EN 60751:2008. Industrial platinum resistance thermometers and platinum temperature sensors
BS EN 60756:1993. Non-broadcast video tape recorders. Time base stability
BS EN 60758:2005. Synthetic quartz crystal. Specifications and guide to the use
BS EN 60758:2009. Synthetic quartz crystal. Specifications and guidelines for use
BS EN 60761-1:2004. Equipment for continuous monitoring radioactivity in gaseous effluentsGeneral requirements
BS EN 60761-2:2004. Equipment for continuous monitoring of radioactivity in gaseous effluentsSpecific requirements for radioactive aerosol monitors including transuranic aerosols
BS EN 60761-3:2004. Equipment for continuous monitoring of radioactivity in gaseousSpecific requirements for radioactive noble gas monitors
BS EN 60761-4:2004. Equipment for continuous monitoring of radioactivity in gaseous effluentsSpecific requirements for radioactive iodine monitors
BS EN 60761-5:2004. Equipment for continuous monitoring of radioactivity in gaseous effluentsSpecific requirements for tritium monitors
BS EN 60763-1:1996, IEC 60763-1:1983. Specification for laminated pressboardDefinitions, classification and general requirements
BS EN 60763-1:2011. Laminated pressboard for electrical purposesDefinitions, classification and general requirements
BS EN 60763-2:1996, IEC 60763-2:1991. Specification for laminated pressboardMethods of test
BS EN 60763-2:2007. Specification for laminated pressboardMethods of test
BS EN 60763-3-1:2011. Laminated pressboard for electrical purposesSpecifications for individual materials. Requirements for laminated precompressed pressboard, Types LB 3.1A.1 and LB3.1A.2
BS EN 60770-1:2011. Transmitters for use in industrial-process control systemsMethods for performance evaluation
BS EN 60770-2:2003. Transmitters for use in industrial-process control systemsMethods for inspection and routine testing
BS EN 60770-2:2010. Transmitters for use in industrial-process control systemsMethods for inspection and routine testing
BS EN 60770-3:2006. Transmitters for use in industrial-process control systemsMethods for performance evaluation of intelligent transmitters
BS EN 60774-1:1994, IEC 60774-1:1994. Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS.VHS and compact VHS video cassette system
BS EN 60774-2:2000, IEC 60774-2:1999. Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHSFM audio recording
BS EN 60774-3:1994, IEC 60774-3:1993. Specification for helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS.S-VHS
BS EN 60774-4:2003. Helical-scan video type cassette system using 12,65 mm (0,5 in) magnetic tape on type VHSS-VHS video cassette system. ET Mode
BS EN 60774-5:2004. Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHSD-VHS
BS EN 60779:2005. Industrial electroheat Equipment. Test methods for electroslag remelting furnaces
BS EN 60789:1994, IEC 60789:1992. Methods of test for Anger type gamma cameras
BS EN 60789:2005. Medical electrical equipment. Characteristics and test conditions of radionuclide imaging devices. Anger type gamma cameras
BS EN 60793-1-1:2003. Optical fibres. Measurement methods and test proceduresGeneral and guidance
BS EN 60793-1-1:2008. Optical fibresMeasurement methods and test procedures. General and guidance
BS EN 60793-1-20:2002. Optical fibres. Measurement methods and test proceduresFibre geometry
BS EN 60793-1-21:2002. Optical fibres. Measurement methods and test proceduresCoating geometry
BS EN 60793-1-22:2002. Optical fibres. Measurement methods and test proceduresLength measurement
BS EN 60793-1-30:2002. Optical fibres. Measurement methods and test proceduresFibre proof test
BS EN 60793-1-30:2011. Optical fibresMeasurement methods and test procedures. Fibre proof test
BS EN 60793-1-31:2002. Optical fibres. Measurement methods and test proceduresTensile strength
BS EN 60793-1-31:2010. Optical fibresMeasurement methods and test procedures. Tensile strength
BS EN 60793-1-32:2003. Optical fibresMeasurement methods and test procedures
BS EN 60793-1-32:2010. Optical fibresMeasurement methods and test procedures. Coating strippability
BS EN 60793-1-33:2002, IEC 60793-1-33:2001. Optical fibres. Measurement methods and test proceduresStress corrosion susceptibility
BS EN 60793-1-34:2002. Optical fibres. Measurement methods and test proceduresFibre curl
BS EN 60793-1-34:2006. Optical fibresMeasurement methods and test procedures
BS EN 60793-1-40:2003. Optical fibresMeasurement methods and test procedures
BS EN 60793-1-41:2002. Optical fibres. Measurement methods and test proceduresBandwidth
BS EN 60793-1-41:2003. Optical fibres. Measurement methods and test proceduresBandwidth
BS EN 60793-1-41:2010. Optical fibresMeasurement methods and test procedures. Bandwidth
BS EN 60793-1-42:2002. Optical fibres. Measurement methods and test proceduresChromatic dispersion
BS EN 60793-1-42:2007. Optical fibresMeasurement methods and test procedures. Chromatic dispersion
BS EN 60793-1-42:2013. Optical fibresMeasurement methods and test procedures. Chromatic dispersion
BS EN 60793-1-43:2002, IEC 60793-1-43:2001. Optical fibres. Measurement methods and test proceduresNumerical aperture
BS EN 60793-1-44:2002. Optical fibres. Measurement methods and test proceduresCut-off wavelength
BS EN 60793-1-44:2011. Optical fibresMeasurement methods and test procedures. Cut-off wavelength
BS EN 60793-1-45:2003. Optical fibresMeasurement methods and test procedures
BS EN 60793-1-46:2002. Optical fibres. Measurement methods and test proceduresMonitoring of changes in optical transmittance
BS EN 60793-1-47:2002. Optical fibres. Measurement methods and test proceduresMacrobending loss
BS EN 60793-1-47:2007. Optical fibresMeasurement methods and test procedures. Macrobending loss
BS EN 60793-1-47:2009. Optical fibresMeasurement methods and test procedures. Macrobending loss
BS EN 60793-1-48:2003. Optical fibresMeasurement methods and test procedures. Polarisation mode dispersion
BS EN 60793-1-48:2007. Optical fibresMeasurement methods and test procedures. Polarization mode dispersion
BS EN 60793-1-49:2003. Optical fibres. Measurement methods and test proceduresDifferential mode delay
BS EN 60793-1-49:2006. Optical fibresMeasurement methods and test procedures
BS EN 60793-1-50:2002. Optical fibres. Measurement methods and test proceduresDamp heat (steady state)
BS EN 60793-1-51:2002. Optical fibres. Measurement methods and test proceduresDry heat
BS EN 60793-1-52:2002. Optical fibres. Measurement methods and test proceduresChange of temperature
BS EN 60793-1-53:2002. Optical fibres. Measurement methods and test proceduresWater immersion
BS EN 60793-1-54:2003. Optical fibres. Measurement methods and test proceduresGamma irradiation
BS EN 60793-1-54:2013. Optical fibresMeasurement methods and test procedures. Gamma irradiation
BS EN 60793-2:2004. Optical fibresProduct specifications. General
BS EN 60793-2:2008. Optical fibresProduct specifications. General
BS EN 60793-2:2012. Optical fibresProduct specifications. General
BS EN 60793-2-10:2002. Optical fibres. Product specificationsSectional specification for category A1 multimode fibres
BS EN 60793-2-10:2004. Optical fibresProduct specification. Sectional specification for category A1 multimode fibres
BS EN 60793-2-10:2007. Optical fibresProduct specifications. Sectional specification for category A1 multimode fibres
BS EN 60793-2-10:2011. Optical fibresProduct specifications. Sectional specification for category A1 multimode fibres
BS EN 60793-2-20:2002. Optical fibres. Product specificationsSectional specification for category A2 multimode fibres
BS EN 60793-2-20:2009. Optical fibresProduct specifications. Sectional specification for category A2 multimode fibres
BS EN 60793-2-30:2002. Optical fibres. Product specificationsSectional specification for category A3 multimode fibres
BS EN 60793-2-30:2009. Optical fibresProduct specifications. Sectional specification for category A3 multimode fibres
BS EN 60793-2-30:2013. Optical fibresProduct specifications. Sectional specification for category A3 multimode fibres
BS EN 60793-2-40:2002. Optical fibres. Product specificationsSectional specification for category A4 multimode fibres
BS EN 60793-2-40:2006. Optical fibresProduct specifications
BS EN 60793-2-40:2011. Optical fibresProduct specifications. Sectional specification for category A4 multimode fibres
BS EN 60793-2-50:2002. Optical fibres. Product specificationsSectional specification for class B single-mode fibres
BS EN 60793-2-50:2004. Optical fibresProducts specification. Sectional specification for class B single-mode fibres
BS EN 60793-2-50:2008. Optical fibresProduct specifications. Sectional specification for class B single-mode fibres
BS EN 60793-2-50:2013. Optical fibresProduct specifications. Sectional specification for class B single-mode fibres
BS EN 60793-2-60:2008. Optical fibresProduct specifications. Sectional specification for category C single-mode intraconnection fibres
BS EN 60794-1-1:2000, IEC 60794-1-1:1999. Optical fibre cables. Generic specificationGeneral
BS EN 60794-1-1:2002, IEC 60794-1-1:2001. Optical fibre cables. Generic specificationGeneral
BS EN 60794-1-1:2011. Optical fibre cablesGeneric specification. General
BS EN 60794-1-2:1999, IEC 60794-1-2:1999. Optical fibre cables. Generic specificationGeneric specification. Basic optical cable test procedures
BS EN 60794-1-2:2003. Optical fibre cables. Generic specificationBasic optical cable test procedures
BS EN 60794-1-22:2012. Optical fibre cablesGeneric specification. Basic optical cable test procedures. Environmental test methods
BS EN 60794-1-23:2012. Optical fibre cablesGeneric specification. Basic optical cable test procedures. Cable element test methods
BS EN 60794-2:2003. Optical fibre cablesIndoor cables. Sectional specification
BS EN 60794-2-10:2003. Optical fibre cables. Indoor cablesIndoor cables. Family specification for simplex and duplex cables
BS EN 60794-2-10:2011. Optical fibre cablesIndoor optical fibre cables. Family specification for simplex and duplex cables
BS EN 60794-2-11:2005. Optical fibre cablesIndoor cables. Detailed specification for simplex and duplex cables for use in premises cabling
BS EN 60794-2-11:2012. Optical fibre cablesIndoor optical fibre cables. Detailed specification for simplex and duplex cables for use in premises cabling
BS EN 60794-2-20:2003. Optical fibre cables. Indoor cablesFamily specification for multi-fibre optical distribution cables
BS EN 60794-2-20:2010. Optical fibre cablesIndoor cables. Family specification for multi-fibre optical distribution cables
BS EN 60794-2-21:2006. Optical fibre cablesIndoor cables
BS EN 60794-2-21:2012. Optical fibre cablesIndoor optical fibre cables. Detailed specification for multi-fibre optical distribution cables for use in premises cabling
BS EN 60794-2-30:2003. Optical fibre cables. Indoor cablesFamily specification for optical fibre ribbon cables
BS EN 60794-2-30:2008. Optical fibre cablesIndoor cables. Family specification for ribbon cables
BS EN 60794-2-31:2006. Optical fibre cablesIndoor cables
BS EN 60794-2-31:2013. Optical fibre cablesIndoor cables. Detailed specification for optical fibre ribbon cables for use in premises cabling
BS EN 60794-2-40:2008. Optical fibre cablesIndoor optical fibre cables. Family specification for A4 fibre cables
BS EN 60794-2-41:2008. Optical fibre cablesIndoor cables. Product specification for simplex and duplex buffered A4 fibres
BS EN 60794-2-42:2008. Optical fibre cablesIndoor optical fibre cables. Product specification for simplex and duplex cables with A4 fibres
BS EN 60794-2-50:2008. Optical fibre cablesIndoor cables. Family specification for simplex and duplex cables for use in terminated cable assemblies
BS EN 60794-3:1996, IEC 60794-3:1994. Optical fibre cablesTelecommunication cables. Sectional specification
BS EN 60794-3:1998, IEC 60794-3:1998. Optical fibre cablesDuct, buried and aerial cables. Sectional specification
BS EN 60794-3:2002, IEC 60794-3:2001. Optical fibre cablesSectional specification. Outdoor cables
BS EN 60794-3-10:2002. Optical fibre cables. Outdoor cablesFamily specification for duct and directly buried optical telecommunication cables
BS EN 60794-3-10:2009. Optical fibre cablesOutdoor cables. Family specification for duct, directly buried and lashed aerial optical telecommunication cables
BS EN 60794-3-11:2010. Optical fibre cablesOutdoor cables. Product specification for duct, directly buried and lashed aerial single-mode optical fibre telecommunication cables
BS EN 60794-3-12:2006. Optical fibre cablesOutdoor cables
BS EN 60794-3-12:2013. Optical fibre cablesOutdoor cables. Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
BS EN 60794-3-20:2002. Optical fibre cables. Outdoor cablesFamily specification for optical self-supporting aerial telecommunication cables
BS EN 60794-3-20:2009. Optical fibre cablesOutdoor cables. Family specification for self-supporting aerial telecommunication cables
BS EN 60794-3-21:2006. Optical fibre cablesOutdoor cables
BS EN 60794-3-30:2003. Optical fibre cables. Outdoor cablesFamily specification for optical telecommunication cables for lake and river crossings
BS EN 60794-3-30:2008. Optical fibresOutdoor cables. Family specification for optical telecommunication cables for lakes, river crossings and coastal application
BS EN 60794-3-40:2008. Optical fibre cablesOutdoor cables. Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers
BS EN 60794-3-50:2008. Optical fibre cablesOutdoor cables. Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes
BS EN 60794-3-60:2008. Optical fibre cablesOutdoor cables. Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes
BS EN 60794-4:2003. Optical fibre cablesSectional specification. Aerial optical cables along electrical power lines
BS EN 60794-4-10:2007. Optical fibre cablesAerial optical cables along electrical power lines. Family specification for OPGW (optical ground wires)
BS EN 60794-4-20:2012. Optical fibre cablesAerial optical cables along electrical power lines. Family specification for ADSS (All Dielectric Self Supported) optical cables
BS EN 60794-5:2007. Optical fibre cablesSectional specification. Microduct cabling for installation by blowing
BS EN 60799:1995. Cord sets
BS EN 60799:1998, IEC 60799:1998. Electrical accessories. Cord sets and interconnection cord sets
BS EN 608:1995. Agricultural and forestry machinery. Portable chain saws. Safety
BS EN 60801-2:1993, IEC 60801-2:1991. Electromagnetic compatibility for industrial-process measurement and control equipmentElectrostatic discharge requirements
BS EN 60804:1994, IEC 60804:1985. Specification for integrating-averaging sound level meters
BS EN 60804:2001, IEC 60804:2001. Integrating-averaging sound level meters
BS EN 60806:2004. Determination of the maximum symmetrical radiation field from a rotating anode X-ray tube for medical diagnosis
BS EN 60809:1996+A5:2012, IEC 60809:1995. Lamps for road vehicles. Dimensional, electrical and luminous requirements
BS EN 60810:1995. Specification for lamps for road vehicles. Performance requirements
BS EN 60810:2003+A2:2013. Lamps for road vehicles. Performance requirements
BS EN 60811-100:2012. Electric and optical fibre cables. Test methods for non-metallic materialsGeneral
BS EN 60811-1-1:1995. Insulating and sheathing materials of electric cables. Common test methods. General applicationMeasurement of thickness and overall dimensions. Tests for determining the mechanical properties
BS EN 60811-1-2:1995, IEC 60811-1-2:1985. Insulating and sheathing materials of electric cables. Common test methods. General applicationThermal ageing methods
BS EN 60811-1-3:1995. Insulating and sheathing materials of electric cables. Common test methods. General applicationMethods for determining the density. Water absorption tests. Shrinkage test
BS EN 60811-1-4:1995, IEC 60811-1-4:1985. Insulating and sheathing materials of electric cables. Common test methods. General applicationTests at low temperature
BS EN 60811-201:2012. Electric and optical fibre cables. Test methods for non-metallic materialsGeneral tests. Measurement of insulation thickness
BS EN 60811-202:2012. Electric and optical fibre cables. Test methods for non-metallic materialsGeneral tests. Measurement of thickness of non-metallic sheath
BS EN 60811-203:2012. Electric and optical fibre cables. Test methods for non-metallic materialsGeneral tests. Measurement of overall dimensions
BS EN 60811-2-1:1995, IEC 60811-2-1:1986. Insulating and sheathing materials of electric cables. Common test methods. Methods specific to elastomeric compoundsOzone resistance test. Hot set test. Mineral oil immersion test
BS EN 60811-2-1:1998, IEC 60811-2-1:1998. Insulating and sheathing materials of electric cables. Common test methods. Methods specific to elastomeric compoundsMethods specific to elastomeric compounds. Ozone resistance, hot set and mineral oil immersion tests
BS EN 60811-301:2012. Electric and optical fibre cables. Test methods for non-metallic materialsElectrical tests. Measurement of the permittivity at 23°C of filling compounds
BS EN 60811-302:2012. Electric and optical fibre cables. Test methods for non-metallic materialsElectrical tests. Measurement of the d.c. resistivity at 23°C and 100°C of filling compounds
BS EN 60811-3-1:1995, IEC 60811-3-1:1985. Insulating and sheathing materials of electric cables. Common test methods. Methods specific to PVC compoundsPressure test at high temperature. Tests for resistance to cracking
BS EN 60811-3-2:1995, IEC 60811-3-2:1985. Insulating and sheathing materials of electric cables. Common test methodsMethods specific to PVC compounds
BS EN 60811-401:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMiscellaneous tests. Thermal ageing methods. Ageing in an air oven
BS EN 60811-402:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMiscellaneous tests. Water absorption tests
BS EN 60811-403:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMiscellaneous tests. Ozone resistance test on cross-linked compounds
BS EN 60811-404:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMiscellaneous tests. Mineral oil immersion tests for sheaths
BS EN 60811-405:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMiscellaneous tests. Thermal stability test for PVC insulations and PVC sheaths
BS EN 60811-406:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMiscellaneous tests. Resistance to stress cracking of polyethylene and polypropylene compounds
BS EN 60811-407:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMiscellaneous tests. Measurement of mass increase of polyethylene and polypropylene compounds
BS EN 60811-408:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMiscellaneous tests. Long-term stability test of polyethylene and polypropylene compounds
BS EN 60811-409:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMiscellaneous tests. Loss of mass test for thermoplastic insulations and sheaths
BS EN 60811-4-1:1995, IEC 60811-4-1:1985. Methods specific to polyethylene and polypropylene compoundsResistance to environmental stress cracking. Wrapping test after thermal ageing in air. Measurement of the flow index. Carbon black and/or mineral content measurement in PE
BS EN 60811-4-1:2004. Insulating and sheathing materials of electric and optical cables. Common test methodsMethods specific to polypropylene and polypropylene compounds. Resistance to environmental stress cracking. Measurement of the melt flow index. Carbon black and/or mineral filter content measurement in PE by direct combustion. Measurement of carbon black content by TGA. Assessment of carbon black dispersion in polyethylene using a microscope
BS EN 60811-410:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMiscellaneous tests. Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
BS EN 60811-411:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMiscellaneous tests. Low-temperature brittleness of filling compounds
BS EN 60811-412:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMiscellaneous tests. Thermal ageing methods. Ageing in an air bomb
BS EN 60811-4-2:2000, IEC 60811-4-2:1990. Insulating and sheathing materials of electric cables. Common test methods. Methods specific to polyethylene and polypropylene compoundsTensile strength and elongation at break after pre-conditioning. Wrapping test after thermal ageing in air. Measurement of mass increase. Long-term stability test. Test method for copper-catalysed oxidative degradation
BS EN 60811-4-2:2004. Insulating and sheathing materials of electric and optical cables. Common test methodsMethods specific to polyethylene and polypropylene compounds
BS EN 60811-501:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMechanical tests. Tests for determining the mechanical properties of insulating and sheathing compounds
BS EN 60811-502:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMechanical tests. Shrinkage test for insulations
BS EN 60811-503:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMechanical tests. Shrinkage test for sheaths
BS EN 60811-504:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMechanical tests. Bending tests at low temperature for insulation and sheaths
BS EN 60811-505:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMechanical tests. Elongation at low temperature for insulations and sheaths
BS EN 60811-506:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMechanical tests. Impact test at low temperature for insulations and sheaths
BS EN 60811-507:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMechanical tests. Hot set test for cross-linked materials
BS EN 60811-508:2012. Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Pressure test at high temperature for insulation and sheaths
BS EN 60811-509:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMechanical tests. Test for resistance of insulations and sheaths to cracking (heat shock test)
BS EN 60811-5-1:2000, IEC 60811-5-1:1990. Insulating and sheathing materials of electric and optical fibre cables. Common test methodsMethods specific to filling compounds. Drop point. Separation of oil. Lower temperature brittleness. Total acid number. Absence of corrosive components. Permittivity at 23°C. D.C. resistivity at 23°C and 100°C
BS EN 60811-510:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMechanical tests. Methods specific to polyethylene and polypropylene compounds. Wrapping test after thermal ageing in air
BS EN 60811-511:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMechanical tests. Measurement of the melt flow index of polyethylene compounds
BS EN 60811-512:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMechanical tests. Methods specific to polyethylene and polypropylene compounds. Tensile strength and elongation at break after conditioning at elevated temperature
BS EN 60811-513:2012. Electric and optical fibre cables. Test methods for non-metallic materialsMechanical tests. Methods specific to polyethylene and polypropylene compounds. Wrapping test after conditioning
BS EN 60811-601:2012. Electric and optical fibre cables. Test methods for non-metallic materials Physical tests. Measurement of the drop point of filling compounds
BS EN 60811-602:2012. Electric and optical fibre cables. Test methods for non-metallic materialsPhysical tests. Separation of oil in filling compounds
BS EN 60811-603:2012. Electric and optical fibre cables. Test methods for non-metallic materialsPhysical tests. Measurement of total acid number of filling compounds
BS EN 60811-604:2012. Electric and optical fibre cables. Test methods for non-metallic materialsPhysical tests. Measurement of absence of corrosive components in filling compounds
BS EN 60811-605:2012. Electric and optical fibre cables. Test methods for non-metallic materialsPhysical tests. Measurement of carbon black and/or mineral filler in polyethylene compounds
BS EN 60811-606:2012. Electric and optical fibre cables. Test methods for non-metallic materialsPhysical tests. Methods for determining the density
BS EN 60811-607:2012. Electric and optical fibre cables. Test methods for non-metallic materialsPhysical tests. Test for the assessment of carbon black dispersion in polyethylene and polypropylene
BS EN 60812:2006. Analysis techniques for system reliability. Procedure for failure mode and effects analysis (FMEA)
BS EN 60814:1998, IEC 60814:1997. Insulating liquids. Oil-impregnated paper and pressboard. Determination of water by automatic coulometric Karl Fischer titration
BS EN 60819-1:1996, IEC 60819-1:1995. Non-cellulosic papers for electrical purposesDefinitions and general requirements
BS EN 60819-1:2012. Non-cellulosic papers for electrical purposesDefinitions and general requirements
BS EN 60819-2:2002, IEC 60819-2:2001. Non-cellulosic papers for electrical purposesMethods of test
BS EN 60819-3-1:2001, IEC 60819-3-1:2001. Non-cellulosic papers for electrical purposes. Specifications for individual materialsFilled glass paper
BS EN 60819-3-2:2002, IEC 60819-3-2:2001. Non-cellulosic papers for electrical purposes. Specifications for individual materialsHybrid inorganic-organic paper
BS EN 60819-3-3:2006. Non-cellulosic papers for electrical purposesSpecifications for individual materials
BS EN 60819-3-3:2011. Non-cellulosic papers for electrical purposesSpecifications for individual materials. Sheet 3: Unifilled aramid (aromatic polyamide) papers
BS EN 60819-3-4:2002, IEC 60819-3-4:2001. Non-cellulosic papers for electrical purposes. Specifications for individual materialsAramid fibre paper containing not more than 50 % of mica particles
BS EN 60821:1995. IEC 821 VMEbus. Microprocessor system bus for 1 byte to 4 byte data
BS EN 60825:1992. Radiation safety of laser products, equipment classification, requirements and user's guide
BS EN 60825-1:1994. Safety of laser productsEquipment classification, requirements and user's guide
BS EN 60825-1:2007. Safety of laser productsEquipment classification and requirements
BS EN 60825-2:1995, IEC 60825-2:1993. Safety of laser productsSafety of laser products. Safety of optical fibre communication systems
BS EN 60825-2:2000, IEC 60825-2:2000. Safety of laser productsSafety of optical fibre communication systems
BS EN 60825-2:2004+A2:2010. Safety of laser productsSafety of optical fibre communication systems (OFCS)
BS EN 60825-4:1998, IEC 60825-4:1997. Safety of laser productsLaser guards
BS EN 60825-4:2006+A2:2011. Safety of laser productsLaser guards
BS EN 60831-1:1994. Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 VGeneral. Performance, testing and rating. Safety requirements. Guide for installation and operation
BS EN 60831-1:1998, IEC 60831-1:1996. Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1kVGeneral. Performance, testing and rating. Safety requirements. Guide for installation and operation
BS EN 60831-2:1994. Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 VAgeing test, self-healing test and destruction test
BS EN 60831-2:1996, IEC 60831-2:1995. Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 VAgeing test, self-healing test and destruction test
BS EN 60832:1997. Specification for insulating poles (insulating sticks) and universal tool attachments (fittings) for live working
BS EN 60832-1:2010. Live working. Insulating sticks and attachable devicesInsulating sticks
BS EN 60832-2:2010. Live working. Insulating sticks and attachable devicesAttachable devices
BS EN 60834-1:2000, IEC 60834-1:1999. Teleprotection equipment of power systems. Performance and testingCommand systems
BS EN 60835-1-1:1994, BS 7573-1.1:1992,IEC 60835-1-1:1990. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements common to terrestrial radio-relay systems and satellite earth stationsGeneral
BS EN 60835-1-2:1995, BS 7573-1.2:1993,IEC 60835-1-2:1992. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements common to terrestrial radio-relay systems and satellite earth stationsBasic characteristics
BS EN 60835-1-3:1997, BS 7573-1.3:1993,IEC 60835-1-3:1992. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements common to terrestrial radio-relay systems and satellite earth stationsTransmission characteristics
BS EN 60835-1-4:1997, BS 7573-1.4:1993,IEC 60835-1-4:1992. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements common to terrestrial radio-relay systems and satellite earth stationsTransmission performance
BS EN 60835-2-1:1994, BS 7573-2.1:1992,IEC 60835-2-1:1990. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on terrestrial radio-relay systemsGeneral
BS EN 60835-2-10:1993, BS 7573-2.10:1993,IEC 60835-2-10:1992. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on terrestrial radio-relay systemsOverall system performance
BS EN 60835-2-11:1997, IEC 60835-2-11:1996. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on terrestrial radio-relay systemsCross-polarization interference canceller
BS EN 60835-2-2:1995, BS 7573-2.2:1995,IEC 60835-2-2:1994. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on terrestrial radio-relay systemsAntenna
BS EN 60835-2-3:1995, BS 7573-2.3:1993,IEC 60835-2-3:1992. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on terrestrial radio-relay systemsR F branching networks
BS EN 60835-2-4:1997, BS 7573-2.4:1993,IEC 60835-2-4:1993. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on terrestrial radio-relay systemsTransmitter/receiver including modulator/demodulator
BS EN 60835-2-5:1995, BS 7573-2.5:1995,IEC 60835-2-5:1993. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on terrestrial radio-relay systemsDigital signal processing sub-system
BS EN 60835-2-6:1996, BS 7573-2.6:1995,IEC 60835-2-6:1995. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on terrestrial radio-relay systemsProtection switching
BS EN 60835-2-7:1995, BS 7573-2.7:1995,IEC 60835-2-7:1994. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on terrestrial radio-relay systemsDiversity switching and combining equipment
BS EN 60835-2-8:1996, BS 7573-2.8:1996,IEC 60835-2-8:1993. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on terrestrial radio-relay systemsAdaptive equalizer
BS EN 60835-2-9:1997, BS 7573-2.9:1997,IEC 60835-2-9:1995. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on terrestrial radio-relay systemsService channels
BS EN 60835-3-1:1994, BS 7573-3.1:1992,IEC 60835-3-1:1990. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stationsGeneral
BS EN 60835-3-10:1995, BS 7573-3.10:1995,IEC 60835-3-10:1994. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stationsTerminal equipment. TDMA traffic earth station
BS EN 60835-3-11:1996, BS 7573-3.11:1996,IEC 60835-3-11:1995. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stationsService channel equipment for SCPC-PSK transmission
BS EN 60835-3-12:1997, BS 7573-3.12:1993,IEC 60835-3-12:1993. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stationsOverall system performance
BS EN 60835-3-13:1997, BS 7573-3.13:1997,IEC 60835-3-13:1996. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stationsVSAT systems
BS EN 60835-3-14:1997, BS 7573-3.14:1997,IEC 60835-3-14:1996. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stationsEarth stations for satellite news gathering (SNG)
BS EN 60835-3-2:1996, BS 7573-3.2:1996,IEC 60835-3-2:1995. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stationsAntenna
BS EN 60835-3-4:1997, BS 7573-3.4:1993,IEC 60835-3-4:1993. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stationsLow noise amplifier
BS EN 60835-3-5:1995, BS 7573-3.5:1995,IEC 60835-3-5:1994. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stationsUp- and down-converters
BS EN 60835-3-6:1997, BS 7573-3.6:1997,IEC 60835-3-6:1996. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stationsHigh-power amplifiers
BS EN 60835-3-7:1996, BS 7573-3.7:1995,IEC 60835-3-7:1995. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stationsFigure-of-merit of receiving system
BS EN 60835-3-9:1995, BS 7573-3.9:1995,IEC 60835-3-9:1993. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stationsTerminal equipment SCPC-PSK
BS EN 60836:2005. Specifications for unused silicone insulating liquids for electrotechnical purposes
BS EN 60838-1:1995, IEC 60838-1:1993. Miscellaneous lampholdersGeneral requirements and tests
BS EN 60838-1:1998, IEC 60838-1:1997. Miscellaneous lampholdersGeneral requirements and tests
BS EN 60838-1:2004+A2:2011. Miscellaneous lampholdersGeneral requirements and tests
BS EN 60838-2-1:1997, IEC 60838-2-1:1994. Miscellaneous lampholdersParticular requirements
BS EN 60838-2-2:2006+A1:2012. Miscellaneous lampholdersParticular requirements. Connectors for LED-modules
BS EN 60843-1:1994, IEC 60843-1:1993. Helical-scan video tape cassette system using 8 mm magnetic tape. 8 mm videoGeneral specifications
BS EN 60843-2:1995, BS 7065-2:1994,IEC 60843-2:1992. Helical-scan video tape cassette system using 8 mm magnetic tape. 8 mm videoPCM multi-track audio system
BS EN 60843-3:1993, IEC 60843-3:1993. Helical-scan video tape cassette system using 8 mm magnetic tape. 8 mm videoHigh-band specifications for Hi 8
BS EN 60843-4:2001, IEC 60843-4:2000. Helical-scan video tape cassette system using 8 mm magnetic tape. 8 mm videoVideo subcode (VSC)
BS EN 60846:2004. Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation
BS EN 60848:2002. GRAFCET specification language for sequential function charts
BS EN 60848:2013. GRAFCET specification language for sequential function charts
BS EN 60849:1998, IEC 60849:1998. Sound systems for emergency purposes
BS EN 60851-1:1996+A2:2009. Winding wires. Test methodsGeneral
BS EN 60851-2:1998, IEC 60851-2:1996. Winding Wires. Test methodsDetermination of dimensions
BS EN 60851-2:2009. Winding wires. Test methodsDetermination of dimensions
BS EN 60851-3:1998, IEC 60851-3:1996. Methods of test for winding wiresMechanical properties
BS EN 60851-3:2009+A1:2013. Winding wires. Test methodsMechanical properties
BS EN 60851-4:1995. Methods of test for winding wiresChemical properties
BS EN 60851-4:1998, IEC 60851-4:1996. Winding Wires. Test methodsChemical properties
BS EN 60851-5:1998, IEC 60851-5:1996. Winding Wires. Test methodsElectrical properties
BS EN 60851-5:2008+A1:2011. Winding wires. Test methodsElectrical properties
BS EN 60851-6:1998, IEC 60851-6:1996. Methods of test for winding wiresThermal properties
BS EN 60851-6:2012. Winding wires. Test methodsThermal properties
BS EN 60852-4:1997, IEC 60852-4:1996. Outline dimensions of transformers and inductors for use in telecommunication and electronic equipmentTransformers and inductors using YUI-2 laminations
BS EN 60855:1997. Insulating foam-filled tubes and solid rods for live working
BS EN 60856:1993, IEC 60856:1986. Specification for pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines. PAL
BS EN 60861:2008. Equipment for monitoring of radionuclides in liquid effluents and surface waters
BS EN 60862-1:2003. Surface acoustic wave (SAW) filters of assessed qualityGeneric specification
BS EN 60862-2:2002. Surface acoustic wave (SAW) filters of assessed qualityGuidance on use
BS EN 60862-2:2012. Surface acoustic wave (SAW) filters of assessed qualityGuidelines for the use
BS EN 60862-3:2003. Surface acoustic wave (SAW) filters of assessed qualityStandard outlines
BS EN 60864-2:1997, IEC 60864-2:1997. Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipmentInterface standards for systems using data bus type interconnections
BS EN 60865-1:1994, IEC 60865-1:1993. Short-circuit currents. Calculation of effectsDefinitions and calculation methods
BS EN 60865-1:2012. Short-circuit currents. Calculation of effectsDefinitions and calculation methods
BS EN 60867:1994, IEC 60867:1993. Insulating liquids. Specifications for unused liquids based on synthetic aromatic hydrocarbons
BS EN 60868:1993. Flickermeter. Functional and design specifications
BS EN 60868-0:1993, IEC 60868-0:1991. FlickermeterEvaluation of flicker severity
BS EN 60869-1:2000, IEC 60869-1:1999. Fibre optic attenuatorsGeneric specification
BS EN 60869-1:2013. Fibre optic interconnecting devices and passive components. Fibre optic passive power control devicesGeneric specification
BS EN 60870-2-1:1996, IEC 60870-2-1:1995. Telecontrol equipment and systems. Operating conditionsPower supply and electromagnetic compatibility
BS EN 60870-2-2:1997, IEC 60870-2-2:1996. Telecontrol equipment and systems. Operating conditionsEnvironmental conditions (climatic, mechanical and other non-electrical influences)
BS EN 60870-5-1:1994, IEC 60870-5-1:1990. Telecontrol equipment and systems. Transmission protocolsTransmission frame formats
BS EN 60870-5-101:1996, IEC 60870-5-101:1995. Telecontrol equipment and systems. Transmission protocolsCompanion standard for basic telecontrol tasks
BS EN 60870-5-101:2003. Telecontrol equipment and systems. Transmission protocolsCompanion standard for basic telecontrol tasks
BS EN 60870-5-102:1997, IEC 60870-5-102:1996. Telecontrol equipment and systems. Transmission protocolsCompanion standard for the transmission of integrated totals in electric power systems
BS EN 60870-5-103:1998, IEC 60870-5-103:1997. Telecontrol equipment and systems. Transmission protocolsCompanion standard for the informative interface of protection equipment
BS EN 60870-5-104:2001, IEC 60870-5-104:2000. Telecontrol equipment and systems. Transmission protocolsNetwork access for IEC 60870-5-101 using standard transport profiles
BS EN 60870-5-104:2006. Telecontrol equipment and systemsTransmission protocols
BS EN 60870-5-2:1994, IEC 60870-5-2:1992. Telecontrol equipment and systems. Transmission protocolsLink transmission procedures
BS EN 60870-5-3:1992. Telecontrol equipment and systems. Transmission protocolsSpecification for general structure of application data
BS EN 60870-5-4:1994, IEC 60870-5-4:1993. Telecontrol equipment and systems. Transmission protocolsDefinition and coding of application information elements
BS EN 60870-5-5:1996, IEC 60870-5-5:1995. Telecontrol equipment and systems. Transmission protocolsBasic application functions
BS EN 60870-5-6:2009. Telecontrol equipment and systemsGuidelines for conformance testing for the EN 60870-5 companion standards
BS EN 60870-6-2:1996, IEC 60870-6-2:1995. Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendationsUse of basic standards (OSI layers 1-4)
BS EN 60870-6-501:1996. Telecontrol equipment and systemsTelecontrol protocols compatible with ISO standards and ITU-T recommendations
BS EN 60870-6-502:1996, IEC 60870-6-502:1995. Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendationsTASE.1 Protocol definitions
BS EN 60870-6-503:1998, IEC 60870-6-503:1997. Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendationsTASE.2 services and protocol
BS EN 60870-6-503:2002, IEC 60870-6-503:2002. Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendationsTASE.2 Services and protocol
BS EN 60870-6-601:1995, IEC 60870-6-601:1994. Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendationsFunctional profile for providing the connection-oriented transport service in end system connected via permanent access to a packet switched data network
BS EN 60870-6-701:1998, IEC 60870-6-701:1998. Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendationsFunctional profile for providing the TASE.1 application service in end systems
BS EN 60870-6-702:1999, IEC 60870-6-702:1998. Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendationsFunctional profile for providing the TASE.2 application service in end systems
BS EN 60870-6-802:1998, IEC 60870-6-802:1997. Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendationsTASE.2 object models
BS EN 60870-6-802:2002. Telecontrol equipment and systemsTelecontrol protocols compatible with ISO standards and ITU-T recommendations. TASE.2 Object models
BS EN 60871-1:1998, IEC 60871-1:1997. Shunt capacitors for a.c. power systems having a rated voltage above 1 kVGeneral, testing and rating. Safety requirements. Guide for installation and operation
BS EN 60871-1:2005. Shunt capacitors for a.c. power systems having a rated voltage above 100 0 VGeneral
BS EN 60871-4:1997, IEC 60871-4:1996. Shunt capacitors for a.c. power systems having a rated voltage above 1 kVInternal fuses
BS EN 60872:1993, IEC 60872:1987. Marine automatic radar plotting aids (ARPA). Operational requirements. Methods of testing and test results
BS EN 60872-1:1999, IEC 60872-1:1998. Maritime navigation and radiocommunication equipment and systems. Radarp lotting aidsAutomatic radar plotting aids (ARPA). Methods of testing and required test results
BS EN 60872-2:1999, IEC 60872-2:1999. Maritime navigation and radiocommunication equipment and systems. Radar plotting aidsAutomatic tracking aids (ATA). Methods of testing and required test results
BS EN 60872-3:2001, IEC 60872-3:2000. Maritime navigation and radiocommunication equipment and systems. Radar plotting aidsElectronic plotting aid (EPA). Performance requirements. Methods of testing and required test results
BS EN 60873:1993. Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems
BS EN 60873-1:2004. Electrical and pneumatic analogue chart recorders for use in industrial-process control systemsMethods for performance evaluation
BS EN 60874-1:1999, IEC 60874-1:1999. Connectors for optical fibres and cablesGeneric specification
BS EN 60874-1:2007. Connectors for optical fibres and cablesGeneric specification
BS EN 60874-1:2012. Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cablesGeneric specification
BS EN 60874-1-1:2007. Connectors for optical fibres and cablesBlank detail specification
BS EN 60874-1-1:2012. Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cablesBlank detail specification
BS EN 60874-17:1997, IEC 60874-17:1995,QC 211300:1995. Connectors for optical fibres and cablesSectional specification for fibre optic connector. Type F-05 (friction lock)
BS EN 60874-19:1997, IEC 60874-19:1995,QC 912100:1996. Connectors for optical fibres and cablesSectional specification for fibre optic connector. Type SC-D (Duplex)
BS EN 60875-1:1998, IEC 60875-1:1996,QC 810000:1996. Fibre optic branching devicesGeneric specification
BS EN 60875-1:2001, IEC 60875-1:2000. Fibre optic branching devicesGeneric specification
BS EN 60875-1:2010. Fibre optic interconnecting devices and passive components. Non-wavelength-selective fibre optic branching devicesGeneric specification
BS EN 60875-1-1:1998, IEC 60875-1-1:1996,QC 810001:1996. Fibre optic branching devicesBlank detail specification
BS EN 60876-1:2001, IEC 60876-1:2001. Fibre optic spatial switchesGeneric specification
BS EN 60876-1:2012. Fibre optic interconnecting devices and passive components. Fibre optic spatial switchesGeneric specification
BS EN 60880:2009. Nuclear power plants. Instrumentation and control systems important to safety. Software aspects for computer-based systems performing category A functions
BS EN 60885-2:2003. Electrical test methods for electric cablesPartial discharge tests
BS EN 60885-3:2003. Electrical test methods for electric cablesTest methods for partial discharge measurements on lengths of extruded power cables
BS EN 60889:1997, IEC 60889:1987. Hard drawn aluminium wire for overhead line conductors
BS EN 60891:1995. Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicon photovoltaic devices
BS EN 60891:2010. Photovoltaic devices. Procedures for temperature and irradiance corrections to measured I-V characteristics
BS EN 60893-1:1995, IEC 60893-1:1987. Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposesDefinitions, designations and general requirements
BS EN 60893-2:1995, IEC 60893-2:1992. Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposesMethods of test
BS EN 60893-2:2004. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposesMethods of test
BS EN 60893-3-1:1995, IEC 60893-3-1:1992. Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materialsTypes of industrial rigid laminated sheets
BS EN 60893-3-1:2004. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposesSpecifications for individual materials. Requirements for types of industrial rigid laminated sheets
BS EN 60893-3-1:2012. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposesSpecifications for individual materials. Types of industrial rigid laminated sheets
BS EN 60893-3-2:1995, IEC 60893-3-2:1993. Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materialsRequirements for rigid laminated sheets based on epoxide resins
BS EN 60893-3-2:2000, IEC 60893-3-2:1998. Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materialsRequirements for rigid laminated sheets based on epoxide resins
BS EN 60893-3-2:2004+A1:2011. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposesSpecifications for individual materials. Requirements for rigid laminated sheets based on epoxy resins
BS EN 60893-3-3:1995, IEC 60893-3-3:1993. Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materialsRequirements for rigid laminated sheets based on melamine resins
BS EN 60893-3-3:2004+A1:2012. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposesSpecifications for individual materials. Requirements for rigid laminated sheets based on melamine resins
BS EN 60893-3-4:1995, IEC 60893-3-4:1993. Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materialsRequirements for rigid laminated sheets based on phenolic resins
BS EN 60893-3-4:2004+A1:2012. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposesSpecifications for individual materials. Requirements for rigid laminated sheets based on phenolic resins
BS EN 60893-3-5:1995, IEC 60893-3-5:1993. Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materialsRequirements for rigid laminated sheets based on polyester resins
BS EN 60893-3-5:2004+A1:2009. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposesSpecifications for individual materials. Requirements for rigid laminated sheets based on polyester resins
BS EN 60893-3-6:1995, IEC 60893-3-6:1993. Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materialsRequirements for rigid laminated sheets based on silicone resins
BS EN 60893-3-6:2004+A1:2009. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposesSpecifications for individual materials. Requirements for rigid laminated sheets based on silicone resins
BS EN 60893-3-7:1995, IEC 60893-3-7:1994. Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materialsRequirements for rigid laminated sheets based on polyimide resins
BS EN 60893-3-7:2004+A1:2009. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposesSpecifications for individual materials. Requirements for rigid laminated sheets based on polyimide resins
BS EN 60895:1997. Conductive clothing for live working at a nominal voltage up to 800 kV a.c.
BS EN 60895:2003. Live working. Conductive clothing for use at a nominal voltage up to 800 kV a.c. and ± 600 kV d.c.
BS EN 60896-1:1992, IEC 60896-1:1987. Stationary lead-acid batteries. General requirements and methods of testVented types
BS EN 60896-11:2003. Stationary lead-acid batteries. General requirements and methods of testVented types. General requirements and methods of tests
BS EN 60896-2:1996, IEC 60896-2:1995. Stationary lead-acid batteries. General requirements and methods of testValve regulated types
BS EN 60896-21:2004. Stationary lead-acid batteriesValve regulated types. Methods of test
BS EN 60896-22:2004. Stationary lead-acid batteriesValve regulated types. Requirements
BS EN 60898:1991. Specification for circuit-breakers for overcurrent protection for household and similar installations
BS EN 60898-1:2003+A13:2012. Electrical accessories ± Circuit breakers for overcurrent protection for household and similar installations Circuit-breakers for a.c. operation
BS EN 60898-2:2001. Circuit-breakers for overcurrent protection for household and similar installationsCircuit-breakers for a.c. and d.c. operation
BS EN 60898-2:2006. Electrical accessories. Circuit-breakers for overcurrent protection for household and similar installationsCircuit-breakers for a.c and d.c. operation
BS EN 60900:1994. Hand tools for live working up to 1000 V a.c. and 1500 V d.c.
BS EN 60900:2004. Live working. Hand tools for use up to 1000 V a.c. and 1500 V d.c.
BS EN 60900:2012. Live working. Hand tools for use up to 1000 V a.c. and 1500 V d.c.
BS EN 60901:1994, IEC 60901:1987. Specification for single-capped fluorescent lamps. Safety and performance requirements
BS EN 60901:1996+A5:2012. Single-capped fluorescent lamps. Performance specifications
BS EN 60903:1993. Specification for gloves and mitts of insulating material for live working
BS EN 60903:2003. Live working. Gloves of insulating material
BS EN 60904-1:1993, IEC 60904-1:1987. Photovoltaic devices.Measurement of photovoltaic current-voltage characteristics
BS EN 60904-1:2006. Photovoltaic devicesMeasurement of photovoltaic current-voltage characteristics
BS EN 60904-10:1998, IEC 60904-10:1998. Photovoltaic devicesMethods of linearity measurement
BS EN 60904-10:2010. Photovoltaic devicesMethods of linearity measurement
BS EN 60904-2:1993, IEC 60904-2:1989. Photovoltaic devicesRequirements for reference solar cells
BS EN 60904-2:2007. Photovoltaic devicesRequirements for reference solar devices
BS EN 60904-3:1993, IEC 60904-3:1989. Photovoltaic devices.Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
BS EN 60904-3:2008. Photovoltaic devicesMeasurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
BS EN 60904-4:2009. Photovoltaic devicesReference solar devices. Procedures for establishing calibration traceability
BS EN 60904-5:1996, IEC 60904-5:1993. Photovoltaic devicesDetermination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method
BS EN 60904-5:2011. Photovoltaic devicesDetermination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method
BS EN 60904-6:1995, IEC 60904-6:1994. Photovoltaic devicesRequirements for reference solar modules
BS EN 60904-7:1998, IEC 60904-7:1998. Photovoltaic devicesComputation of spectral mismatch error introduced in the testing of a photovoltaic device
BS EN 60904-7:2009. Photovoltaic devicesComputation of the spectral mismatch correction for measurements of photovoltaic devices
BS EN 60904-8:1998, IEC 60904-8:1998. Photovoltaic devicesMeasurement of spectral response of a photovoltaic (PV) device
BS EN 60904-9:2007. Photovoltaic devicesSolar simulator performance requirements
BS EN 60908:1993, IEC 60908:1987. Specification for compact disc digital audio system
BS EN 60908:1999, IEC 60908:1999. Audio recording. Compact disc digital audio system
BS EN 60909-0:2001, IEC 60909-0:2001. Short-circuit currents in three-phase a.c. systemsCalculation of currents
BS EN 60909-3:2003. Short-circuit current calculation in three-phase a.c. systemsCurrents during two separate simultaneous single phase line-to- earth short circuits and partial short-circuit currents flowing through earth
BS EN 60909-3:2010. Short-circuit currents in three-phase a.c systemsCurrents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth
BS EN 609-1:1999+A2:2009. Agricultural and forestry machinery. Safety of log splittersWedge splitters
BS EN 60915:2007. Capacitors and resistors for use in electronic equipment. Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components
BS EN 60917:1992, IEC 60917:1988. Modular order for the development of mechanical structures for electronic equipment practices
BS EN 60917-0:1992, IEC 60917-0:1989. Modular order for the development of mechanical structures for electronic equipment practicesGuide for the users of IEC Publication 60917
BS EN 60917-1:1999, IEC 60917-1:1998. Modular order for the development of mechanical structures for electronic equipment practicesGeneric standard
BS EN 60917-2:1994. Modular order for the development of mechanical structures for electronic equipment practices.Sectional specification. Interface co-ordination dimensions for the 25 mm equipment practice
BS EN 60917-2-1:1997, IEC 60917-2-1:1993. Modular order for the development of mechanical structures for electronic equipment practices. Sectional specification. Interface co-ordination dimensions for the 25 mm equipment practiceDetail specification. Dimensions for cabinets and racks
BS EN 60917-2-2:1997, IEC 60917-2-2:1994. Modular order for the development of mechanical structures for electronic equipment practices. Sectional specification. Interface co-ordination dimensions for the 25 mm equipment practiceDetail specification. Dimensions for subracks, chassis, backplanes, front panels and plug-in units
BS EN 60917-2-3:2006. Modular order for the development of mechanical structures for electronic equipment practicesSectional specification. Interface co-ordination dimensions for the 25 mm equipment practice. Extended detail specification. Dimensions for subracks, chassis, backplanes, front panels and plug-in units
BS EN 60917-2-4:2010. Modular order for the development of mechanical structures for electronic equipment practicesSectional specification. Interface coordination dimensions for the 25 mm equipment practice. Adaptation dimensions for subracks or chassis applicable in cabinets or racks in accordance with IEC 60297-3-100 (19 in)
BS EN 60917-2-5:2012. Modular order for the development of mechanical structures for electronic equipment practicesSectional specification. Interface co-ordination dimensions for the 25 mm equipment practice. Cabinet interface dimensions for miscellaneous equipment
BS EN 609-2:1999+A1:2009. Agricultural and forestry machinery. Safety of Log splittersScrew splitters
BS EN 60920:1991. Ballasts for tubular fluorescent lamps. General and safety requirements
BS EN 60921:1991. Specification for ballasts for tubular fluorescent lamps. Performance requirements
BS EN 60921:2004. Ballasts for tubular fluorescent lamps. Performance requirements
BS EN 60922:1991. Specification for general and safety requirements for ballasts for discharge lamps (excluding tubular fluorescent lamps)
BS EN 60922:1997, IEC 60922:1997. Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). General and safety requirements
BS EN 60923:1991. Specification for performance requirements for ballasts for discharge lamps (excluding tubular fluorescent lamps)
BS EN 60923:1996. Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). Performance requirements
BS EN 60923:2005. Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). Performance requirements
BS EN 60924:1991. Specification for general and safety requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps
BS EN 60925:1991. Specification for performance requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps
BS EN 60926:1991. Specification for general and safety requirements for starting devices (other than glow starters)
BS EN 60926:1996. Specification for auxiliaries for lamps. Starting devices (other than glow starters). General and safety requirements
BS EN 60927:1991. Specification for performance requirements for starting devices (other than glow starters)
BS EN 60927:1997, IEC 60927:1996. Specification for auxiliaries for lamps. Starting devices (other than glow starters). Performance requirements
BS EN 60927:2007. Auxiliaries for lamps. Starting devices (other than glow starters). Performance requirements
BS EN 60928:1991. Specification for a.c. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
BS EN 60928:1995, IEC 60928:1995. Auxiliaries for lamps. a.c. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
BS EN 60929:1992. Specification for a.c. supplied electronic ballasts for tubular fluorescent lamps. Performance requirements
BS EN 60929:2004. A.C. supplied electronic ballasts for tubular fluorescent lamps. Performance requirements
BS EN 60929:2006. A.C. supplied electronic ballasts for tubular fluorescent lamps. Performance requirements
BS EN 60929:2011. AC and/or DC-supplied electronic control gear for tubular fluorescent lamps. Performance requirements
BS EN 60931-1:1994. Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 VGeneral. Performance, testing and rating. Safety requirements. Guide for installation and operation
BS EN 60931-1:1998, IEC 60931-1:1996. Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kVGeneral. Performance, testing and rating. Safety requirements. Guide for installation and operation
BS EN 60931-2:1994, IEC 60931-2:1992. Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 VAgeing test and destruction test
BS EN 60931-2:1996, IEC 60931-2:1996. Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 VAgeing test and destruction test
BS EN 60931-3:1997, IEC 60931-3:1996. Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 VInternal fuses
BS EN 60933-3:1993, IEC 60933-3:1992. Audio, video and audiovisual systems. Interconnections and matching valuesSpecification for interface for the interconnection of ENG cameras and portable VTRs using non-composite signals, for 625 line/50 field systems
BS EN 60933-4:1994, IEC 60933-4:1994. Audio, video and audiovisual systems. Interconnections and matching valuesConnector and cordset for domestic digital bus (D2B)
BS EN 60933-5:1993, IEC 60933-5:1992. Audio, video and audiovisual systems. Interconnections and matching values.Specification for Y/C connector for video systems. Electrical matching values and description of the connector
BS EN 60934:1994. Specification for circuit-breakers for equipment (CBE)
BS EN 60934:2001+A2:2013. Circuit-breakers for equipment (CBE)
BS EN 60936:1993, IEC 60936:1988. Shipborne radar. Operational and performance requirements. Methods of test and required test results
BS EN 60936-1:2000, IEC 60936-1:1999. Maritime navigation and radiocommunication equipment and systems. RadarShipborne radar. Performance requirements. Methods of testing and required test results
BS EN 60936-2:1999, IEC 60936-2:1998. Maritime navigation and radiocommunication equipment and systems. RadarShipborne radar for high speed craft (HSC). Methods of testing and required test results
BS EN 60936-3:2002. Maritime navigation and radiocommunication equipment and systems. RadarRadar with chart facilities. Performance requirements. Methods of testing and required test results
BS EN 60938-1:2000, IEC 60938-1:1999. Fixed inductors for electromagnetic interference suppressionGeneric specification
BS EN 60938-2:2000, IEC 60938-2:1999. Fixed inductors for electromagnetic interference suppressionSectional specification
BS EN 60938-2-1:2000, IEC 60938-2-1:1999. Fixed inductors for electromagnetic interference suppression.Blank detail specification. Inductors for which safety tests are required. Assessment level D
BS EN 60938-2-2:2000, IEC 60938-2-2:1999. Fixed inductors for electromagnetic interference suppression.Blank detail specification. Inductors for which safety tests are required (only)
BS EN 60939-1:2005. Passive filter units for electromagnetic interference suppressionGeneric specification
BS EN 60939-1:2010. Passive filter units for electromagnetic interference suppressionGeneric specification
BS EN 60939-2:2005. Passive filter units for electromagnetic interference suppressionSectional specification: passive filter units for which safety tests are appropriate. Test methods and general requirements
BS EN 60939-2-1:2004. Complete filter units for radio interference suppressionBlank detail specification. Passive filter units for electromagnetic interference suppression. Filters for which safety tests are required (Assessment level D/DZ)
BS EN 60939-2-2:2004. Complete filter units for radio interference suppressionBlank detail specification. Passive filter units for electromagnetic interference suppression. Filters for which safety tests are required (safety tests only)
BS EN 60942:1998, IEC 60942:1997. Electroacoustics. Sound calibrators
BS EN 60942:2003. Electroacoustics. Sound calibrators
BS EN 60945:1993, IEC 60945:1988. Marine navigational equipment. General requirements. Methods of testing and required test results
BS EN 60945:1996, IEC 60945:1994. Marine navigation equipment. General requirements. Methods of testing and required test results
BS EN 60945:1997, IEC 60945:1996. Maritime navigation and radiocommunication equipment and systems. General requirements. Methods of testing and required test results
BS EN 60945:2002. Maritime navigation and radiocommunication equipment and systems. General requirements. Methods of testing and required test results
BS EN 60947-1:1992. Specification for low-voltage switchgear and controlgearGeneral rules
BS EN 60947-1:1998. Specification for low-voltage switchgear and controlgearGeneral rules
BS EN 60947-1:1999. Specification for low-voltage switchgear and controlgearGeneral rules
BS EN 60947-1:2004. Specification for low-voltage switchgear and controlgearGeneral rules
BS EN 60947-1:2007+A1:2011. Low-voltage switchgear and controlgearGeneral rules
BS EN 60947-2:1992. Specification for low-voltage switchgear and controlgearCircuit-breakers
BS EN 60947-2:1996. Specification for low-voltage switchgear and controlgearCircuit-breakers
BS EN 60947-2:2003. Specification for low-voltage switchgear and controlgearCircuit-breakers
BS EN 60947-2:2006+A2:2013. Low-voltage switchgear and controlgearCircuit-breakers
BS EN 60947-3:1992. Specification for low-voltage switchgear and controlgearSwitches, disconnectors, switch-disconnectors and fuse-combination units
BS EN 60947-3:1999. Low voltage switchgear and controlgearSwitches, disconnectors, switch-disconnectors and fuse-combination units
BS EN 60947-3:2009+A1:2012. Low-voltage switchgear and controlgearSwitches, disconnectors, switch-disconnectors and fuse-combination units
BS EN 60947-4-1:1992. Specification for low-voltage switchgear and controlgear. Contactors and motor-startersElectromechanical contactors and motor-starters
BS EN 60947-4-1:2001. Low-voltage switchgear and controlgearContactors and motor-starters. Electromechanical contactors and motor-starters
BS EN 60947-4-1:2010+A1:2012. Low-voltage switchgear and controlgearContactors and motor-starters. Electromechanical contactors and motor-starters
BS EN 60947-4-2:1997. Specification for low-voltage switchgear and controlgear. Contactors and motor-startersa.c. semiconductor motor controllers and starters
BS EN 60947-4-2:2000, IEC 60947-4-2:1999. Low-voltage switchgear and controlgearContactors and motor-starters. AC semiconductor motor controllers and starters
BS EN 60947-4-2:2012. Low-voltage switchgear and controlgearContactors and motor-starters. AC semiconductor motor controllers and starters
BS EN 60947-4-3:2000+A2:2011. Low-voltage switchgear and controlgearContactors and motor-starters. AC semiconductor controllers and contactors for non-motor loads
BS EN 60947-5-1:1992. Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elementsElectromechanical control circuit devices
BS EN 60947-5-1:1998. Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elementsElectromechanical control circuit devices
BS EN 60947-5-1:2004+A1:2009. Low-voltage switchgear and controlgearControl/circuit devices and switching elements. Electromechanical control circuit devices
BS EN 60947-5-2:1998. Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elementsProximity switches
BS EN 60947-5-2:1999. Specification for low-voltage switchgear and controlgearControl circuit devices and switching elements. Proximity switches
BS EN 60947-5-2:2007+A1:2012. Low-voltage switchgear and controlgearControl circuit devices and switching elements. Proximity switches
BS EN 60947-5-3:1999, IEC 60947-5-3:1999. Low-voltage switchgear and controlgearControl circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDF)
BS EN 60947-5-4:1997, IEC 60947-5-4:1996. Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elementsMethods of assessing the performance of low energy contacts. Special tests
BS EN 60947-5-4:2003. Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elementsMethod of assessing the performance of low-energy contacts. Special tests
BS EN 60947-5-5:1998+A11:2013, IEC 60947-5-5:1997. Low-voltage switchgear and controlgearControl circuit devices and switching elements. Electrical emergency stop device with mechanical latching function
BS EN 60947-5-6:2001, IEC 60947-5-6:1999. Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elementsDC interface for proximity sensors and switching amplifiers (NAMUR)
BS EN 60947-5-7:2003. Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elementsRequirements for proximity devices with analogue output
BS EN 60947-5-8:2006. Low-voltage switchgear and controlgearControl circuit devices and switching elements
BS EN 60947-5-9:2007. Low-voltage switchgear and controlgearControl circuit devices and switching elements. Flow rate switches
BS EN 60947-6-1:1992. Specification for low-voltage switchgear and controlgear. Multiple function equipmentAutomatic transfer switching equipment
BS EN 60947-6-1:2005. Low-voltage switchgear and controlgearMultiple function equipment. Transfer switching equipment
BS EN 60947-6-2:1993. Specification for low-voltage switchgear and controlgear. Multiple function equipmentControl and protective switching devices (or equipment) (CPS)
BS EN 60947-6-2:2003. Low-voltage switchgear and controlgearMultiple function equipment. Control and protective switching devices (or equipment) (CPS)
BS EN 60947-7-1:1992. Specification for low-voltage switchgear and controlgear. Ancillary equipmentTerminal blocks for copper conductors
BS EN 60947-7-1:2002. Specification for low-voltage switchgear and controlgear. Ancillary equipmentTerminal blocks for copper conductors
BS EN 60947-7-1:2009. Low-voltage switchgear and controlgearAncillary equipment. Terminal blocks for copper conductors
BS EN 60947-7-2:1996. Specification for low-voltage switchgear and controlgear. Ancillary equipmentProtective conductor terminal blocks for copper conductors
BS EN 60947-7-2:2002. Specification for low-voltage switchgear and controlgear. Ancillary equipmentProtective conductor terminal blocks for copper conductors
BS EN 60947-7-2:2009. Low-voltage switchgear and controlgearAncillary equipment. Protective conductor terminal blocks for copper conductors
BS EN 60947-7-3:2002. Specification for low-voltage switchgear and controlgear. Ancillary equipmentSafety requirements for fuse terminal blocks
BS EN 60947-7-3:2009. Low-voltage switchgear and controlgearAncillary equipment. Safety requirements for fuse terminal blocks
BS EN 60947-7-4:2013. Low-voltage switchgear and controlgearAncillary equipment. PCB terminal blocks for copper conductors
BS EN 60947-8:2003+A2:2012. Low-voltage switchgear and controlgearControl units for built-in thermal protection (PTC) for rotating electrical machines
BS EN 60950:1992, BS 7002:1992. Specification for safety of information technology equipment, including electrical business equipment
BS EN 60950:2000. Safety of information technology equipment
BS EN 60950-1:2006+A2:2013. Information technology equipment. SafetyGeneral requirements
BS EN 60950-21:2003. Information technology equipment. SafetyRemote power feeding
BS EN 60950-22:2006. Information technology equipment. SafetyEquipment installed outdoors
BS EN 60950-23:2006. Information technology equipment. SafetyLarge data storage equipment
BS EN 60952-1:1993, IEC 60952-1:1988. Aircraft batteriesGeneral test requirements and performance levels
BS EN 60952-1:2004. Aircraft batteriesGeneral test requirements and performance levels
BS EN 60952-2:1993, IEC 60952-2:1991. Aircraft batteries.Design and construction requirements
BS EN 60952-2:2004. Aircraft batteriesDesign and construction requirements
BS EN 60952-3:1995, IEC 60952-3:1993. Aircraft batteriesExternal electrical connectors
BS EN 60952-3:2004. Aircraft batteriesProduct specification and declaration of design and performance (DDP)
BS EN 60953-1:1996, IEC 60953-1:1990. Rules for steam turbine thermal acceptance testsHigh accuracy for large condensing steam turbines
BS EN 60953-2:1996, IEC 60953-2:1990. Rules for steam turbine thermal acceptance testsWide range of accuracy for various types and sizes of turbines
BS EN 60953-3:2002, IEC 60953-3:2001. Rules for steam turbine thermal acceptance testsThermal performance verification tests of retrofitted steam turbines
BS EN 60958:1995, BS 7239:1989,IEC 60958:1989. Specification for digital audio interface
BS EN 60958-1:2000, IEC 60958-1:1999. Digital audio interfaceGeneral
BS EN 60958-1:2004. Digital audio interfaceGeneral
BS EN 60958-1:2008. Digital audio interfaceGeneral
BS EN 60958-3:2000, IEC 60958-3:1999. Digital audio interfaceConsumer applications
BS EN 60958-3:2003. Digital audio interfaceConsumer applications
BS EN 60958-3:2006+A1:2010. Digital audio interfaceConsumer applications
BS EN 60958-4:2000, IEC 60958-4:1999. Digital audio interfaceProfessional applications
BS EN 60958-4:2003+A1:2008. Digital audio interfaceProfessional applications (TA4)
BS EN 60961:1994, IEC 60961:1993. Specification for helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type L
BS EN 60964:2010. Nuclear power plants. Control rooms. Design
BS EN 60965:2011. Nuclear power plants. Control rooms. Supplementary control points for reactor shutdown without access to the main control room
BS EN 60966-1:1993, IEC 60966-1:1988. Radio frequency and coaxial cable assembliesGeneral requirements and test methods
BS EN 60966-1:1999, IEC 60966-1:1999,QC 140000:1999. Radio frequency and coaxial cable assembliesGeneric specification. General requirements and test methods
BS EN 60966-2-1:1996, IEC 60966-2-1:1991. Radio frequency and coaxial cable assemblies.Sectional specification for flexible coaxial cable assemblies
BS EN 60966-2-1:2003. Radio frequency and coaxial cable assemblies.Sectional specification for flexible coaxial cable assemblies
BS EN 60966-2-1:2009. Radio frequency and coaxial cable assembliesSectional specification for flexible coaxial cable assemblies
BS EN 60966-2-2:1996, IEC 60966-2-2:1992. Radio frequency and coaxial cable assemblies.Blank detail specification for flexible coaxial cable assemblies
BS EN 60966-2-2:2003. Radio frequency and coaxial cable assemblies.Blank detail specification for flexible coaxial cable assemblies
BS EN 60966-2-3:1999, IEC 60966-2-3:1996. Radio frequency and coaxial cable assemblies.Detail specification for flexible coaxial cable assemblies
BS EN 60966-2-3:2003. Radio frequency and coaxial cable assemblies.Detail specification for flexible coaxial cable assemblies
BS EN 60966-2-3:2009. Radio frequency and coaxial cable assembliesDetail specification for flexible coaxial cable assemblies. Frequency range 0 MHz to 1000 MHz, IEC 61169-8 connectors
BS EN 60966-2-4:1998, IEC 60966-2-4:1997. Radio frequency and coaxial cable assemblies.Detail specification for cable assemblies for radio and TV receivers (Frequency range 0 to 3000 MHz, IEC 60169-2 connectors)
BS EN 60966-2-4:2003. Radio frequency and coaxial cable assemblies.Detail specification for cable assemblies for radio and TV receivers Frequency range 0 to 3000 MHz, IEC 61169-2 connectors
BS EN 60966-2-4:2009. Radio frequency and coaxial cable assembliesDetail specification for cable assemblies for radio and TV receivers. Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors
BS EN 60966-2-5:1999, IEC 60966-2-5:1998
BS EN 60966-2-5:1999, IEC 60966-2-5:1998. Radio frequency and coaxial cable assemblies.Detail specification for cable assemblies for TV and radio receivers. Frequency range 0 to 1000 MHz, IEC 60169-2 connectors
BS EN 60966-2-5:1999. Radio frequency and coaxial cable assembliesDetail specification for cable assemblies for TV and radio receivers. Frequency range 0 to 1000 MHz, IEC 60169-2 connectors
BS EN 60966-2-5:2003. Radio frequency and coaxial cable assemblies.Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 to 1000 MHz, IEC 61169-2 connectors
BS EN 60966-2-5:2009. Radio frequency and coaxial cable assembliesDetail specification for cable assemblies for radio and TV receivers. Frequency range 0 MHz to 1000 MHz, IEC 61169-2 connectors
BS EN 60966-2-6:1999, IEC 60966-2-6:1998
BS EN 60966-2-6:1999, IEC 60966-2-6:1998. Radio frequency and coaxial cable assemblies.Detail specification for cable assemblies for TV and radio receivers. Frequency range 0 to 3000 MHz, IEC 60169-24 connectors
BS EN 60966-2-6:1999. Radio frequency and coaxial cable assembliesDetail specification for cable assemblies for TV and radio receivers. Frequency range 0 to 3000 MHz, IEC 60169-24 connectors
BS EN 60966-2-6:2003. Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 to 3000 MHz, IEC 61169-24 connectors
BS EN 60966-2-6:2009. Radio frequency and coaxial cable assembliesDetail specification for cable assemblies for radio and TV receivers. Frequency range 0 MHz to 3000 MHz, IEC 61169-24 connectors
BS EN 60966-3:1996, IEC 60966-3:1992. Radio frequency and coaxial cable assembliesSectional specification for semi-flexible coaxial cable assemblies
BS EN 60966-3:2003. Radio frequency and coaxial cable assembliesSectional specification for semi-flexible coaxial cable assemblies
BS EN 60966-3:2009. Radio frequency and coaxial cable assembliesSectional specification for semi-flexible coaxial cable assemblies
BS EN 60966-3-1:1996, IEC 60966-3-1:1992. Radio frequency and coaxial cable assemblies.Blank detail specification for semi-flexible coaxial cable assemblies
BS EN 60966-3-1:2003. Radio frequency and coaxial cable assemblies.Blank detail specification for semi-flexible coaxial cable assemblies
BS EN 60966-3-1:2009. Radio frequency and coaxial cable assembliesBlank detail specification for semi-flexible coaxial cable assemblies
BS EN 60966-3-2:1999, IEC 60966-3-2:1996. Radio frequency and coaxial cable assemblies.Detail specification for flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz)
BS EN 60966-3-2:2003. Radio frequency and coaxial cable assemblies.Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz)
BS EN 60966-4:1996, IEC 60966-4:1992. Radio frequency and coaxial cable assembliesSectional specification for semi-rigid coaxial cable assemblies
BS EN 60966-4:2003. Radio frequency and coaxial cable assembliesSectional specification for semi-rigid coaxial cable assemblies
BS EN 60966-4-1:1996, IEC 60966-4-1:1992. Radio frequency and coaxial cable assemblies.Blank detail specification for semi-rigid coaxial cable assemblies
BS EN 60966-4-1:2003. Radio frequency and coaxial cable assemblies.Blank detail specification for semi-rigid coaxial cable assemblies
BS EN 60967:1991. Specification for safety of electrically heated blankets, pads and similar flexible heating appliances for household use
BS EN 60968:2000. Specification for self-ballasted lamps for general lighting services. Safety requirements
BS EN 60968:2013. Self-ballasted lamps for general lighting services. Safety requirements
BS EN 60969:1993. Self-ballasted lamps for general lighting services. Performance requirements
BS EN 60970:2007. Insulating liquids. Methods for counting and sizing particles
BS EN 60974-1:1998, IEC 60974-1:1998. Arc welding equipmentWelding power sources
BS EN 60974-1:2005. Arc welding equipmentWelding power sources
BS EN 60974-1:2012. Arc welding equipmentWelding power sources
BS EN 60974-10:2003, IEC 60974-10:2002. Arc welding equipmentElectromagnetic compatibility (EMC) requirements
BS EN 60974-10:2007. Arc welding equipmentElectromagnetic compatibility (EMC) requirements
BS EN 60974-11:1996. Arc welding equipmentElectrode holders
BS EN 60974-11:2004. Arc welding equipmentElectrode holders
BS EN 60974-11:2010. Arc welding equipmentElectrode holders
BS EN 60974-12:1996. Arc welding equipmentCoupling devices for welding cables
BS EN 60974-12:2005. Arc welding equipmentCoupling devices for welding cables
BS EN 60974-12:2011. Arc welding equipmentCoupling devices for welding cables
BS EN 60974-13:2011. Arc welding equipmentWelding clamp
BS EN 60974-2:2003. Arc welding equipmentLiquid cooling systems
BS EN 60974-2:2008. Arc welding equipmentLiquid cooling systems
BS EN 60974-2:2013. Arc welding equipmentLiquid cooling systems
BS EN 60974-3:2003. Arc welding equipmentArc striking and stabilizing devices
BS EN 60974-3:2007. Arc welding equipmentArc striking and stabilizing devices
BS EN 60974-4:2007. Arc welding equipmentIn-service inspection and testing
BS EN 60974-4:2011. Arc welding equipmentPeriodic inspection and testing
BS EN 60974-5:2002, IEC 60974-5:2002. Arc welding equipmentWire feeders
BS EN 60974-5:2008. Arc welding equipmentWire feeders
BS EN 60974-5:2013. Arc welding equipmentWire feeders
BS EN 60974-6:2003. Arc welding equipmentLimited duty manual metal arc welding power sources
BS EN 60974-6:2011. Arc welding equipmentLimited duty equipment
BS EN 60974-7:2000, IEC 60974-7:2000. Arc welding equipmentTorches
BS EN 60974-7:2005. Arc welding equipmentTorches
BS EN 60974-7:2013. Arc welding equipmentTorches
BS EN 60974-8:2004. Arc welding equipmentGas consoles for welding and plasma cutting systems
BS EN 60974-8:2009. Arc welding equipmentGas consoles for welding and plasma cutting systems
BS EN 60974-9:2010. Arc welding equipmentInstallation and use
BS EN 60976:2001, BS 5724-3.1:1990,IEC 60976:1989. Medical electrical equipment. Medical electron accelerators. Functional performance characteristics
BS EN 60976:2007. Medical electrical equipment. Medical electron accelerators. Functional performance characteristics
BS EN 60983:1996, IEC 60983:1995. Specification for miniature lamps
BS EN 60984:1993. Specification for sleeves of insulating material for live working
BS EN 60987:2009. Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems
BS EN 60990:2000, IEC 60990:1999. Methods of measurement of touch current and protective conductor current
BS EN 60993:2002. Electrolyte for vented nickel-cadmium cells
BS EN 60994:1993, IEC 60994:1991. Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)
BS EN 60995:1995, IEC 60995:1991. Determination of the prototype performance from model acceptance tests of hydraulic machines with the consideration of scale effects
BS EN 60998-1:1993. Connecting devices for low-voltage circuits for household and similar purposesGeneral requirements
BS EN 60998-1:2004. Connecting devices for low-voltage circuits for household and similar purposesGeneral requirements
BS EN 60998-2-1:1993. Connecting devices for low voltage circuits for household and similar purposes.Particular requirements for connecting devices as separate entities with screw-type clamping units
BS EN 60998-2-1:2004. Connecting devices for low-voltage circuits for household and similar purposesParticular requirements for connecting devices as separate entities with screw-type clamping units
BS EN 60998-2-2:1994, IEC 60998-2-2:1991. Connecting devices for low-voltage circuits for household and similar purposes.Particular requirements for connecting devices as separate entities with screwless-type clamping units
BS EN 60998-2-2:2004. Connecting devices for low voltage circuits for household and similar purposesParticular requirements for connecting devices as separate entities with screwless-type clamping units
BS EN 60998-2-3:1994, IEC 60998-2-3:1991. Connecting devices for low-voltage circuits for household and similar purposes.Particular requirements for connecting devices as separate entities with insulation piercing clamping units
BS EN 60998-2-3:2004. Connecting devices for low-voltage circuits for household and similar purposesParticular requirements for connecting devices as separate entities with insulation-piercing clamping units
BS EN 60998-2-4:1993, IEC 60998-2-4:1993. Connecting devices for low-voltage circuits for household and similar purposes.Particular requirements for twist-on connecting devices
BS EN 60998-2-4:2005. Connecting devices for low voltage circuits for household and similar purposes
BS EN 60999:1993. Connecting devices. Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors
BS EN 610:1996. Tin and tin alloys. Ingot tin
BS EN 61000-2-10:1999, IEC 61000-2-10:1998. Electromagnetic compatibility (EMC). EnvironmentDescription of HEMP environment. Conducted disturbance
BS EN 61000-2-12:2003. Electromagnetic compatibility (EMC). EnvironmentCompatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems
BS EN 61000-2-2:2002. Electromagnetic compatibility (EMC). EnvironmentCompatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
BS EN 61000-2-4:1995, IEC 61000-2-4:1994. Electromagnetic compatibility (EMC). EnvironmentCompatibility levels in industrial plants for low-frequency conducted disturbances
BS EN 61000-2-4:2002. Electromagnetic compatibility (EMC). EnvironmentCompatibility levels in industrial plants for low-frequency conducted disturbances
BS EN 61000-2-9:1996, IEC 61000-2-9:1996. Electromagnetic compatibility (EMC). EnvironmentDescription of HEMP environment. Radiated disturbance. Basic EMC publication
BS EN 61000-3-11:2001, IEC 61000-3-11:2000. Electromagnetic compatibility (EMC). LimitsLimitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated voltage current ≤ 75 A and subject to conditional connection
BS EN 61000-3-12:2005. Electromagnetic compatibility (EMC)Limits
BS EN 61000-3-12:2011. Electromagnetic compatibility (EMC)Limits. Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current $2K 16 A and ≤ 75 A per phase
BS EN 61000-3-2:1995, IEC 61000-3-2:1995. Electromagnetic compatibility (EMC). LimitsLimits for harmonic current emissions (equipment input current ≤ 16 A per phase)
BS EN 61000-3-2:2001, IEC 61000-3-2:2000. Electromagnetic compatibility (EMC)Limits. Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)
BS EN 61000-3-2:2006+A2:2009. Electromagnetic compatibility (EMC)Limits. Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
BS EN 61000-3-3:1995+A2:2005, IEC 61000-3-3:1994. Electromagnetic compatibility (EMC)Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
BS EN 61000-3-3:2008. Electromagnetic compatibility (EMC)Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
BS EN 61000-3-3:2013. Electromagnetic compatibility (EMC)Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
BS EN 61000-4-1:1995, IEC 61000-4-1:1992. Electromagnetic compatibility (EMC). Testing and measurement techniquesOverview of immunity tests. Basic EMC publication
BS EN 61000-4-1:2001, IEC 61000-4-1:2000. Electromagnetic compatibility (EMC). Testing and measurement techniquesOverview of IEC 61000-4 series
BS EN 61000-4-1:2007. Electromagnetic compatibility (EMC)Testing and measurement techniques. Overview of IEC 61000-4 series
BS EN 61000-4-10:1994, IEC 61000-4-10:1993. Electromagnetic compatibility (EMC). Testing and measurement techniquesDamped oscillatory magnetic field immunity test. Basic EMC publication
BS EN 61000-4-11:1994. Electromagnetic compatibility (EMC). Testing and measurement techniquesVoltage dips, short interruptions and voltage variations immunity tests
BS EN 61000-4-11:2004. Electromagnetic compatibility (EMC)Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests
BS EN 61000-4-12:1996, IEC 61000-4-12:1995. Electromagnetic compatibility (EMC). Testing and measurement techniquesOscillatory waves immunity test. Basic EMC publication
BS EN 61000-4-12:2006. Electromagnetic compatibility (EMC)Testing and measurement techniques. Ring wave immunity test
BS EN 61000-4-13:2002+A1:2009. Electromagnetic compatibility (EMC)Testing and measurement techniques. Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
BS EN 61000-4-14:1999+A2:2009. Electromagnetic compatibility (EMC)Testing and measurement techniques. Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
BS EN 61000-4-15:1998, IEC 61000-4-15:1997. Electromagnetic compatibility (EMC). Testing and measurement techniquesFlickermeter. Functional and design specifications. Basic EMC publication
BS EN 61000-4-15:2011. Electromagnetic compatibility (EMC)Testing and measurement techniques. Flickermeter. Functional and design specifications
BS EN 61000-4-16:1998+A2:2011. Electromagnetic compatibility (EMC)Testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
BS EN 61000-4-17:1999+A2:2009, IEC 61000-4-17:1999. Electromagnetic compatibility (EMC)Testing and measurement techniques. Ripple on d.c. input power port immunity test
BS EN 61000-4-18:2007+A1:2010. Electromagnetic compatibility (EMC)Testing and measurement techniques. Damped oscillatory wave immunity test
BS EN 61000-4-2:1995, IEC 61000-4-2:1995. Electromagnetic compatibility (EMC). Testing and measurement techniquesElectrostatic discharge immunity test. Basic EMC publication
BS EN 61000-4-2:2009. Electromagnetic compatibility (EMC)Testing and measurement techniques. Electrostatic discharge immunity test
BS EN 61000-4-20:2003. Electromagnetic Compatibility (EMC)Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
BS EN 61000-4-20:2010. Electromagnetic compatibility (EMC)Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
BS EN 61000-4-21:2003. Electromagnetic compatibility (EMC). Testing and measurement techniquesReverberation chamber test methods
BS EN 61000-4-21:2011. Electromagnetic compatibility (EMC)Testing and measurement techniques. Reverberation chamber test methods
BS EN 61000-4-22:2011. Electromagnetic compatibility (EMC)Testing and measurement techniques. Radiated emission and immunity measurements in fully anechoic rooms (FARs)
BS EN 61000-4-23:2001, IEC 61000-4-23:2000. Electromagnetic compatibility (EMC). Testing and measurement techniquesTest methods for protective devices for HEMP and other radiated disturbances
BS EN 61000-4-24:1997, IEC 61000-4-24:1997. Electromagnetic compatibility (EMC). Testing and measurement techniquesTest methods for protective devices for HEMP conducted disturbance. Basic EMC publication
BS EN 61000-4-25:2002+A1:2012, IEC 61000-4-25:2001. Electromagnetic compatibility (EMC)Testing and measurement techniques. HEMP immunity test methods for equipment and systems
BS EN 61000-4-27:2000+A1:2009, IEC 61000-4-27:2000. Electromagnetic compatibility (EMC)Testing and measurement techniques. Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
BS EN 61000-4-28:2000+A2:2009. Electromagnetic compatibility (EMC)Testing and measurement techniques. Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase
BS EN 61000-4-29:2001, IEC 61000-4-29:2000. Electromagnetic compatibility (EMC). Testing and measurement techniquesTesting and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
BS EN 61000-4-3:1997. Electromagnetic compatibility (EMC)Testing and measurement techniques
BS EN 61000-4-3:2002. Electromagnetic compatibility (EMC).Testing and measurement techniques. Radiated, radio-frequency, electromagnetic field immunity test
BS EN 61000-4-3:2006+A2:2010. Electromagnetic compatibility (EMC)Testing and measurement techniques. Radiated, radio-frequency, electromagnetic field immunity test
BS EN 61000-4-30:2003. Electromagnetic compatibility (EMC). Testing and measurement techniquesPower quality measurement methods
BS EN 61000-4-30:2009. Electromagnetic compatability (EMC)Testing and measurement techniques. Power quality measurement methods
BS EN 61000-4-34:2007+A1:2009. Electromagnetic compatibility (EMC)Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
BS EN 61000-4-4:1995, IEC 61000-4-4:1995. Electromagnetic compatibility (EMC). Testing and measurement techniquesElectrical fast transient/burst immunity test. Basic EMC publication
BS EN 61000-4-4:2004+A1:2010. Electromagnetic compatibility (EMC)Testing and measurement techniques. Electrical fast transient/burst immunity test
BS EN 61000-4-4:2012. Electromagnetic compatibility (EMC)Testing and measurement techniques. Electrical fast transient/burst immunity test
BS EN 61000-4-5:1995, IEC 61000-4-5:1995. Electromagnetic compatibility (EMC). Testing and measurement techniquesSurge immunity test
BS EN 61000-4-5:2006. Electromagnetic compatibility (EMC)Testing and measurement techniques
BS EN 61000-4-6:1996, IEC 61000-4-6:1996. Electromagnetic compatibility (EMC). Testing and measurement techniquesImmunity to conducted disturbances, induced by radio-frequency fields
BS EN 61000-4-6:2007. Electromagnetic compatibility (EMC)Testing and measurement techniques. Immunity to conducted disturbances, induced by radio-frequency fields
BS EN 61000-4-6:2009. Electromagnetic compatibility (EMC)Testing and measurement techniques. Immunity to conducted disturbances, induced by radio-frequency fields
BS EN 61000-4-7:1993, IEC 61000-4-7:1991. Electromagnetic compatibility (EMC)General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
BS EN 61000-4-7:2002+A1:2009. Electromagnetic compatibility (EMC). Testing and measurement techniques General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
BS EN 61000-4-8:1994, IEC 61000-4-8:1993. Electromagnetic compatibility (EMC). Testing and measurement techniquesPower frequency magnetic field immunity test. Basic EMC publication
BS EN 61000-4-8:2010. Electromagnetic compatibility (EMC)Testing and measurement techniques. Power frequency magnetic field immunity test
BS EN 61000-4-9:1994, IEC 61000-4-9:1993. Electromagnetic compatibility (EMC). Testing and measurement techniquesPulse magnetic field immunity test. Basic EMC publication
BS EN 61000-5-5:1996, IEC 61000-5-5:1996. Electromagnetic compatibility (EMC). Installation and mitigation guidelinesSpecification of protective devices for HEMP conducted disturbance. Basic EMC publication
BS EN 61000-5-7:2001. Electromagnetic compatibility (EMC). Installation and mitigation guidelinesInstallation and mitigation guidelines. Degrees of protection by enclosures against electromagnetic disturbances (EM code)
BS EN 61000-6-1:2001. Electromagnetic compatibility (EMC)Generic standards. Immunity for residential, commercial and light-industrial environments
BS EN 61000-6-1:2007. Electromagnetic compatibility (EMC)Generic standards. Immunity for residential, commercial and light-industrial environments
BS EN 61000-6-2:1999, IEC 61000-6-2:1999. Electromagnetic compatibility (EMC). Generic standardsImmunity for industrial environments
BS EN 61000-6-2:2001. Electromagnetic compatibility (EMC)Generic standards. Immunity for industrial environments
BS EN 61000-6-2:2005. Electromagnetic compatibility (EMC)Generic standards
BS EN 61000-6-3:2001. Electromagnetic compatibility (EMC). Generic standardsEmission standard for residential, commercial and light-industrial environments
BS EN 61000-6-3:2007+A1:2011. Electromagnetic compatibility (EMC)Generic standards. Emission standard for residential, commercial and light-industrial environments
BS EN 61000-6-4:2001. Electromagnetic compatibility (EMC). Generic standardsEmission standard for industrial environments
BS EN 61000-6-4:2007+A1:2011. Electromagnetic compatibility (EMC)Generic standards. Emission standard for industrial environments
BS EN 61003-1:1993, IEC 61003-1:1991. Industrial-process control systems. Instruments with analogue inputs and two- or multi-state outputs.Methods of evaluating the performance
BS EN 61003-2:2009. Industrial-process control systems. Instruments with analogue inputs and two- or multi-state outputsGuidance for inspection and routine testing
BS EN 61005:2004. Radiation protection instrumentation. Neutron ambient dose equivalent (rate) meters
BS EN 61006:1993, IEC 61006:1991. Methods of test for determination of the glass transition temperature of electrical insulating materials
BS EN 61006:2004. Electrical insulating materials. Methods of test for the determination of the glass transition temperature
BS EN 61007:1997. Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures
BS EN 61008-1:1995. Specification for residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs)General rules
BS EN 61008-1:2004+A13:2012. Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's)General rules
BS EN 61008-1:2012. Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs)General rules
BS EN 61008-2-1:1995. Specification for residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs).Applicability of the general rules to RCCBs functionally independent of line voltage
BS EN 61009-1:1995. Electrical accessories. Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's)General rules
BS EN 61009-1:2004+A14:2012. Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs)General rules
BS EN 61009-1:2012. Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs)General rules
BS EN 61009-2-1:1995. Specification for residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs).Applicability of the general rules to RCBOs functionally independent of line voltage
BS EN 61010-031:2002+A1:2008. Safety requirements for electrical equipment for measurement, control and laboratory useSafety requirements for hand-held probe assemblies for electrical measurement and test
BS EN 61010-1:1993. Safety requirements for electrical equipment for measurement, control and laboratory useGeneral requirements
BS EN 61010-1:2001, IEC 61010-1:2001. Safety requirements for electrical equipment for measurement, control and laboratory useGeneral requirements
BS EN 61010-1:2010. Safety requirements for electrical equipment for measurement, control, and laboratory useGeneral requirements
BS EN 61010-2-010:1995, IEC 61010-2-010:1992. Safety requirements for electrical equipment for measurement, control and laboratory use.Particular requirements for laboratory equipment for the heating of materials
BS EN 61010-2-010:2003. Safety requirements for electrical equipment for measurement, control and laboratory useParticular requirements for laboratory equipment for the heating of material
BS EN 61010-2-020:1995, IEC 61010-2-020:1992. Safety requirements for electrical equipment for measurement, control and laboratory use.Particular requirements for laboratory centrifuges
BS EN 61010-2-020:2006. Safety requirements for electrical equipment for measurement, control, and laboratory useParticular requirements for laboratory centrifuges
BS EN 61010-2-030:2010. Safety requirements for electrical equipment for measurement, control, and laboratory useParticular requirements for testing and measuring circuits
BS EN 61010-2-031:1995, IEC 61010-2-031:1993. Safety requirements for electrical equipment for measurement, control and laboratory use.Particular requirements for hand-held probe assemblies for electrical measurement and test
BS EN 61010-2-032:1995, IEC 61010-2-032:1994. Safety requirements for electrical equipment for measurement, control and laboratory use.Particular requirements for hand-held current clamps for electrical measurement and test
BS EN 61010-2-032:2002. Safety requirements for electrical equipment for measurement, control and laboratory use.Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement
BS EN 61010-2-032:2012. Safety requirements for electrical equipment for measurement, control, and laboratory useParticular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement
BS EN 61010-2-033:2012. Safety requirements for electrical equipment for measurement, control, and laboratory useParticular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage
BS EN 61010-2-040:2005. Safety requirements for electrical equipment for measurement, control and laboratory useParticular requirements for sterilizers and washer-disinfectors used to treat medical materials
BS EN 61010-2-041:1997, IEC 61010-2-041:1995. Safety requirements for electrical equipment for measurement, control and laboratory use.Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes
BS EN 61010-2-042:1997, IEC 61010-2-042:1997. Safety requirements for electrical equipment for measurement, control and laboratory use.Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials, and for laboratory processes
BS EN 61010-2-043:1998, IEC 61010-2-043:1997. Safety requirements for electrical equipment for measurement, control and laboratory use.Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the treatment of medical materials, and for laboratory processes
BS EN 61010-2-045:2001. Safety requirements for electrical equipment for measurement, control and laboratory use.Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields
BS EN 61010-2-051:1996, IEC 61010-2-051:1995. Safety requirements for electrical equipment for measurement, control and laboratory use.Particular requirements for laboratory equipment for mechanical mixing and stirring
BS EN 61010-2-051:2003. Safety requirements for electrical equipment for measurement, control and laboratory use.Particular requirements for laboratory equipment for mixing and stirring
BS EN 61010-2-061:1996, IEC 61010-2-061:1995. Safety requirements for electrical equipment for measurement, control and laboratory use.Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
BS EN 61010-2-061:2003. Safety requirements for electrical equipment for measurement, control and laboratory useParticular requirements for laboratory atomic spectrometers with thermal atomization and ionization
BS EN 61010-2-081:2002. Safety requirements for electrical equipment for measurement, control and laboratory use.Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
BS EN 61010-2-091:2012. Safety requirements for electrical equipment for measurement, control and laboratory useParticular requirements for cabinet x-ray systems
BS EN 61010-2-101:2002. Safety requirements for electrical equipment for measurement, control and laboratory use.Particular requirements for in vitro diagnostic (IVD) medical equipment
BS EN 61011:1993. Electric fence energizers. Safety requirements for mains-operated electric fence energizers
BS EN 61011-1:1993. Electric fence energizersSafety requirements for battery-operated electric fence energizers suitable for connection to the supply mains
BS EN 61011-2:1993. Electric fence energizersSafety requirements for battery-operated electric fence energizers not for connection to the supply mains
BS EN 61012:1998, IEC 61012:1990. Filters for the measurement of audible sound in the presence of ultrasound
BS EN 61014:2003. Programmes for reliability growth
BS EN 61016:2001. Helical-scan digital component video cassette recording system using 19 mm magnetic tape (format D-1)
BS EN 61019-1:2005. Surface acoustic wave (SAW) resonatorsGeneric specification
BS EN 61019-2:1997, IEC 61019-2:1995. Surface acoustic wave (SAW) resonatorsGuide to the use
BS EN 61019-2:2005. Surface acoustic wave (SAW) resonatorsGuide to the use
BS EN 61020-1:2009. Electromechanical switches for use in electrical and electronic equipmentGeneric specification
BS EN 61021-1:1997, IEC 61021-1:1990. Laminated core packages for transformers and inductors for use in telecommunication and electronic equipmentSpecification for dimensions
BS EN 61021-2:1997, IEC 61021-2:1995. Laminated core packages for transformers and inductors for use in telecommunication and electronic equipmentElectrical characteristics for cores using YEE 2 laminations
BS EN 61023:1993, IEC 61023:1990. Marine speed and distance measuring equipment (SDME). Operational and performance requirements. Methods of testing and required test results
BS EN 61023:2000, IEC 61023:1999. Maritime navigation and radiocommunication equipment and systems. Marine speed and distance measuring equipment (SDME). Performance requirements. Methods of testing and required test results
BS EN 61023:2007. Maritime navigation and radiocommunication equipment and systems. Marine speed and distance measuring equipment (SDME). Performance requirements, methods of testing and required test results
BS EN 61025:2007. Fault tree analysis (FTA)
BS EN 61027:1993, IEC 61027:1991. Specification for instruments for the measurement of aural acoustic impedance/admittance
BS EN 61028:1993, IEC 61028:1991. Specification for electrical measuring instruments. X-Y recorders
BS EN 61029-1:1996. Safety of transportable motor-operated toolsGeneral requirements
BS EN 61029-1:2000. Safety of transportable motor-operated toolsGeneral requirements
BS EN 61029-1:2009+A11:2010. Safety of transportable motor-operated electric toolsGeneral requirements
BS EN 61029-2-1:2002. Safety of transportable motor-operated tools.Particular requirements for circular saw benches
BS EN 61029-2-1:2010. Safety of transportable motor-operated electric toolsParticular requirements for circular saw benches
BS EN 61029-2-1:2012. Safety of transportable motor-operated electric tools Particular requirements for circular saw benches
BS EN 61029-2-10:2010+A11:2013. Safety of transportable motor-operated electric toolsParticular requirements for cutting-off grinders
BS EN 61029-2-11:2003. Safety of transportable motor-operated toolsParticular requirements for combined mitre and bench saws
BS EN 61029-2-11:2009. Safety of transportable motor-operated electric toolsParticular requirements for combined mitre and bench saws
BS EN 61029-2-11:2012+A11:2013. Safety of transportable motor-operated electric toolsParticular requirements for combined mitre and bench saws
BS EN 61029-2-12:2011. Safety of transportable motor-operated electric toolsParticular requirements for threading machines
BS EN 61029-2-3:2011. Safety of transportable motor-operated electric toolsParticular requirements for planers and thicknessers
BS EN 61029-2-4:2003. Safety of transportable motor-operated toolsParticular requirements for bench grinders
BS EN 61029-2-4:2011. Safety of transportable motor-operated electric toolsParticular requirements for bench grinders
BS EN 61029-2-5:2002. Safety of transportable motor-operated tools.Particular requirements for band saws
BS EN 61029-2-5:2011. Safety of transportable motor-operated electric toolsParticular requirements for band saws
BS EN 61029-2-6:2010. Safety of transportable motor-operated electric toolsParticular requirements for diamond drills with water supply
BS EN 61029-2-8:2003. Safety of transportable motor-operated toolsParticular requirements for single spindle vertical moulders
BS EN 61029-2-8:2010. Safety of transportable motor-operated electric toolsParticular requirements for single spindle vertical moulders
BS EN 61029-2-9:2002. Safety of transportable motor-operated tools.Particular requirements for mitre saws
BS EN 61029-2-9:2009. Safety of transportable motor-operated electric toolsParticular requirements for mitre saws
BS EN 61029-2-9:2012. Safety of transportable motor-operated electric toolsParticular requirements for mitre saws
BS EN 61030:1993, IEC 61030:1991. Specification for domestic digital bus (D2B) for audio, video and audiovisual systems
BS EN 61032:1998, IEC 61032:1997. Protection of persons and equipment by enclosures. Probes for verification
BS EN 61033:2006. Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
BS EN 61034-1:2005. Measurement of smoke density of cables burning under defined conditionsTest apparatus
BS EN 61034-2:2005+A1:2013. Measurement of smoke density of cables burning under defined conditionsTest procedure and requirements
BS EN 61036:1993. Alternating current static watt-hour meters for active energy (classes 1 and 2)
BS EN 61036:1997, IEC 61036:1996. Alternating current static watt-hour meters for active energy (classes 1 and 2)
BS EN 61037:1993. Electricity metering. Tarriff and load control. Particular requirements for electronic ripple control receivers
BS EN 61038:1993. Specification for time switches for tariff and load control
BS EN 61039:2008. Classification of insulating liquids
BS EN 61040:1993, IEC 61040:1990. Specification for power and energy measuring detectors, instruments and equipment for laser radiation
BS EN 61041-1:1995, BS 7434-1:1991,IEC 61041-1:1990. Non-broadcast video tape recorders. Methods of measurementGeneral video (NTSC/PAL) and audio (longitudinal) characteristics
BS EN 61041-2:1996, BS 7434-2:1996,IEC 61041-2:1994. Non-broadcast video tape recorders. Methods of measurementVideo characteristics chrominance SECAM
BS EN 61041-3:1995, BS 7434-3:1994,IEC 61041-3:1993. Non-broadcast video tape recorders. Methods of measurementAudio characteristics for FM recording
BS EN 61041-4:1998, BS 7434-4:1998,IEC 61041-4:1997. Non-broadcast video tape recorders. Methods of measurementCalibration tape (NTSC/PAL/SECAM)
BS EN 61041-5:1998, BS 7434-5:1998,IEC 61041-5:1997. Non-broadcast video tape recorders. Methods of measurementHigh-band video tape recorders, including those equipped with Y/C video connectors (NTSC/PAL)
BS EN 61043:1994, IEC 61043:1993. Specification for electroacoustics. Instruments for the measurement of sound intensity. Measurement with pairs of pressure sensing microphones
BS EN 61044:1993, IEC 61044:1990. Opportunity-charging of lead-acid traction batteries
BS EN 61046:1992, IEC 61046:1991. Specification for d.c. or a.c. supplied electronic step-down convertors for filament lamps. General and safety requirements
BS EN 61046:1995, IEC 61046:1993. Specification for d.c. or a.c. supplied electronic step-down convertors for filament lamps. General and safety requirements
BS EN 61047:1993, IEC 61047:1991. Specification for d.c. or a.c. supplied electronic step-down convertors for filament lamps. Performance requirements
BS EN 61047:2004. D.C. or A.C. supplied electronic step-down convertors for filament lamps. Performance requirements
BS EN 61048:1993. Specification for capacitors for use in tubular fluorescent and other discharge lamp circuits. General and safety requirements
BS EN 61048:2006. Auxiliaries for lamps. Capacitors for use in tubular fluorescent and other discharge lamp circuits. General and safety requirements
BS EN 61049:1993. Specification for capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements
BS EN 61050:1992. Specification for transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers). General and safety requirements
BS EN 61051-1:2008. Varistors for use in electronic equipmentGeneric specification
BS EN 61054:1993, IEC 61054:1991. Helical-scan video tape cassette system using 12.65 mm (0.5 in) magnetic tape on type VHS. FM audio recording
BS EN 61056-1:1993, IEC 61056-1:1991. Portable lead-acid cells and batteries (valve-regulated types)General requirements, functional characteristics. Methods of test
BS EN 61056-1:2003. Portable lead-acid cells and batteries (valve-regulated types)General requirements, functional characteristics. Methods of test
BS EN 61056-1:2012. General purpose lead-acid batteries (valve-regulated types)General requirements, functional characteristics. Methods of test
BS EN 61056-2:1997, IEC 61056-2:1994. Portable lead-acid cells and batteries (valve-regulated types)Dimensions, terminals and markings
BS EN 61056-2:2003. Portable lead-acid cells and batteries (valve-regulated types)Dimensions, terminals and marking
BS EN 61056-2:2012. General purpose lead-acid batteries (valve-regulated types)Dimensions, terminals and marking
BS EN 61057:1994. Aerial devices with insulating boom used for live working exceeding 1 kV a.c.
BS EN 61058-1:1992. Switches for appliancesGeneral requirements
BS EN 61058-1:2002+A2:2008. Switches for appliancesGeneral requirements
BS EN 61058-2-1:1993. Switches for appliances. Particular requirementsCord switches
BS EN 61058-2-1:2011. Switches for appliancesParticular requirements for cord switches
BS EN 61058-2-4:2005. Switches for appliances
BS EN 61058-2-5:2011. Switches for appliancesParticular requirements for change-over selectors
BS EN 61061-1:1998, IEC 61061-1:1998. Non-impregnated densified laminated wood for electrical purposesDefinitions, designations and general requirements
BS EN 61061-1:2006. Non-impregnated densified laminated wood for electrical purposesDefinitions, designation and general requirements
BS EN 61061-2:2001, IEC 61061-2:1992. Non-impregnated densified laminated wood for electrical purposesMethods of test
BS EN 61061-3-1:1998, IEC 61061-3-1:1998. Non-impregnated densified laminated wood for electrical purposes. Specification for individual materialsSheets produced from beech veneer
BS EN 61061-3-2:2002, IEC 61061-3-2:2001. Non-impregnated densified laminated wood for electrical purposes. Specification for individual materialsRings produced from beech veneer
BS EN 61063:1996, IEC 61063:1991. Acoustics. Measurement of airborne noise emitted by steam turbines and driven machinery
BS EN 61064:1993, IEC 61064:1991. Guide to acceptance tests for steam turbine speed control systems
BS EN 61065:1993, IEC 61065:1991. Method for evaluating the low temperature flow properties of mineral insulating oils after ageing
BS EN 61067-1:1997, IEC 61067-1:1991. Glass and glass polyester fibre woven tapesDefinitions, classification and general requirements
BS EN 61067-2:1997, IEC 61067-2:1992. Glass and glass polyester fibre woven tapesMethods of test
BS EN 61067-3-1:1995, IEC 61067-3-1:1995. Glass and glass polyester fibre woven tapes. Specifications for individual materialsType 1, 2 and 3 tapes
BS EN 61068-1:1997, IEC 61068-1:1991. Polyester fibre woven tapesDefinitions, designation and general requirements
BS EN 61068-2:1997, IEC 61068-2:1991. Polyester fibre woven tapesMethods of test
BS EN 61068-3-1:1996, IEC 61068-3-1:1995. Polyester fibre woven tapes. Specification for individual materialsTapes woven on conventional or shuttleless looms
BS EN 61069-1:1993, IEC 61069-1:1991. Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment.General considerations and methodology
BS EN 61069-2:1994, IEC 61069-2:1993. Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessmentAssessment methodology
BS EN 61069-3:1997, IEC 61069-3:1996. Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessmentAssessment of system functionality
BS EN 61069-4:1998, IEC 61069-4:1997. Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessmentAssessment of system performance
BS EN 61069-5:1995, IEC 61069-5:1994. Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessmentAssessment of system dependability
BS EN 61069-6:1998, IEC 61069-6:1998. Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessmentAssessment of system operability
BS EN 61069-7:1999, IEC 61069-7:1999. Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessmentAssessment of system safety
BS EN 61069-8:1999, IEC 61069-8:1999. Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessmentAssessment of non-task related system properties
BS EN 61071:2007. Capacitors for power electronics
BS EN 61071-1:1997. Power electronic capacitorsGeneral
BS EN 61071-2:1996, IEC 61071-2:1994. Power electronic capacitorsRequirements for disconnecting test on fuses, destruction test, self healing test and endurance test
BS EN 61073-1:2000, IEC 61073-1:1999. Mechanical splices and fusion splice protectors for optical fibres and cablesGeneric specification
BS EN 61073-1:2009. Fibre optic interconnecting devices and Passive components. Mechanical splices and fusion splice protectors for optical fibres and cablesGeneric specification
BS EN 61074:1993, IEC 61074:1991. Method of test for determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry
BS EN 61075:1993. Loran-C receivers for ships. Minimum performance standards. Methods of testing and required test results
BS EN 61076-1:1996, IEC 61076-1:1995,QC 480000. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applicationsGeneric specification
BS EN 61076-1:2006. Connectors for electronic equipment. Product requirementsGeneric specification
BS EN 61076-2:1999, IEC 61076-2:1998. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applicationsCircular connectors with assessed quality. Sectional specification
BS EN 61076-2:2011. Connectors for electronic equipment. Product requirementsSectional specification for circular connectors
BS EN 61076-2-001:2002, IEC 61076-2-001:2001. Connectors for electronic equipment. Circular connectorsBlank detail specification
BS EN 61076-2-001:2011. Connectors for electronic equipment. Product requirementsCircular connectors. Blank detail specification
BS EN 61076-2-101:2003+A1:2006. Connectors for electronic equipmentCircular connectors. Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications
BS EN 61076-2-101:2008. Connectors for electronic equipment. Product requirementsCircular connectors. Detail specification for M12 connectors with screw-locking
BS EN 61076-2-101:2012. Connectors for electronic equipment. Product requirementsCircular connectors. Detail specification for M12 connectors with screw-locking
BS EN 61076-2-102:2002. Connectors for electronic equipment. Circular connectorsCircular connectors with assessed quality. Detail specification for plugs and jacks for external low voltage power supply
BS EN 61076-2-103:2004. Connectors for electronic equipmentCircular connectors
BS EN 61076-2-104:2008. Connectors for electronic equipment. Product requirementsCircular connectors. Detail specification for circular connectors with M8 screw-locking or snap-locking
BS EN 61076-2-105:2008. Connectors for electronic equipment. Product requirementsCircular connectors. Detail specification for M5 connectors with screw-locking
BS EN 61076-2-106:2011. Connectors for electronic equipment. Product requirementsCircular connectors. Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67
BS EN 61076-2-107:2010. Connectors for electronic equipment. Product requirementsDetail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
BS EN 61076-3:2000, IEC 61076-3:1999. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applicationsRectangular connectors with assessed quality. Sectional specification
BS EN 61076-3:2008. Connectors for electronic equipment. Product requirementsRectangular connectors. Sectional specification
BS EN 61076-3-001:2000, IEC 61076-3-001:1999. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectorsBlank detail specification
BS EN 61076-3-001:2008. Connectors for electronic equipment. Product requirementsRectangular connectors. Blank detail specification
BS EN 61076-3-100:2000. Connectors for use in d.c., low-frequency analogue and digital high-speed data applicationsRectangular connectors with assessed quality
BS EN 61076-3-101:1997, IEC 61076-3-101:1997. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applicationsRectangular connectors. Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line
BS EN 61076-3-103:2004. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectorsDetail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)
BS EN 61076-3-104:2003. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectorsDetail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 600 MHz minimum
BS EN 61076-3-104:2006. Connectors for electronic equipment. Product requirementsDetail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 1000 MHz
BS EN 61076-3-106:2006. Connectors for electronic equipment. Product requirementsRectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface
BS EN 61076-3-110:2008. Connectors for electronic equipment. Product requirementsRectangular connectors. Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1000 MHz
BS EN 61076-3-110:2012. Connectors for electronic equipment. Product requirementsDetail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz
BS EN 61076-3-112:2006. Connectors for electronic equipmentRectangular connectors
BS EN 61076-3-114:2009. Connectors for electronic equipment. Product requirementsRectangular connectors. Detail specification for.protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 11 related to IEC 61076-3-106. Bayonet coupling type
BS EN 61076-3-115:2010. Connectors for electronic equipment. Product requirementsRectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 12 related to IEC 61076-3-106. Push-pull type
BS EN 61076-3-116:2008. Connectors for electronic equipment. Product requirementsRectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 13 related to IEC 61076-3-106. Locking lever
BS EN 61076-3-117:2009. Connectors for electronic equipment. Product requirementsRectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface. Variant 14 related to IEC 61076-3-106. Push-pull coupling
BS EN 61076-3-118:2010. Connectors for electronic equipment. Product requirementsRectangular connectors. Detail specification for a 4 pole + PE power connector with push-pull coupling
BS EN 61076-4:1997, IEC 61076-4:1995,QC 480300:1995. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applicationsSectional specification. Printed board connectors
BS EN 61076-4-001:1997, IEC 61076-4-001:1996,QC 480301:1996. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectorsBlank detail specification
BS EN 61076-4-100:1998, IEC 61076-4-100:1994,QC 480301XX0001:1994. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectorsDetail specification for two-part connector modules having a grid of 2,5 mm (0,098 in) for printed boards and backplanes
BS EN 61076-4-100:2002, IEC 61076-4-100:2001. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectorsDetail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
BS EN 61076-4-101:1998, IEC 61076-4-101:1995,QC 480301XX0002:1995. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectorsDetail specification for two-part connector modules having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
BS EN 61076-4-101:2001, IEC 61076-4-101:2001. Connectors for electronic equipmentPrinted board connectors with assessed quality. Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
BS EN 61076-4-102:1997, IEC 61076-4-102:1997. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectorsDetail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917
BS EN 61076-4-103:1999, IEC 61076-4-103:1999. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectorsDetail specification for two-part connectors with shielding and a basic grid of 2,5 mm
BS EN 61076-4-104:1999, IEC 61076-4-104:1999. Connectors for electronic equipment. Printed board connectors with assessed qualityDetail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm
BS EN 61076-4-105:1998, IEC 61076-4-105:1995,QC 480301XX0006:1995. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectorsDetail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry
BS EN 61076-4-107:2001, IEC 61076-4-107:2001. Connectors for electronic equipmentPrinted board connectors with assessed quality. Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations
BS EN 61076-4-108:2002. Connectors for electronic equipment. Printed board connectors with assessed qualityDetail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
BS EN 61076-4-110:2002, IEC 61076-4-110:2001. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectorsDetail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
BS EN 61076-4-111:2002. Connectors for electronic equipment. Printed board connectors with assessed qualityDetail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1
BS EN 61076-4-113:2003. Connectors for electronic equipmentPrinted board connectors with assessed quality Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
BS EN 61076-4-114:2003. Connectors for electronic equipment. Printed board connectors with assessed qualityDetail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm
BS EN 61076-4-115:2003. Connectors for electronic equipment. Printed board connectors with assessed qualityBackplane connector for InfiniBand equipment
BS EN 61076-4-116:2012. Connectors for electronic equipment. Product requirementsPrinted board connectors. Detail specification for a high-speed two-part connector with integrated shielding function
BS EN 61076-5:2001, IEC 61076-5:2001. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applicationsIn-line sockets with assessed quality. Sectional specification
BS EN 61076-6:2004. Connectors for electronic equipmentLoose part contacts. Sectional specification
BS EN 61076-7:2001, IEC 61076-7:2000. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applicationsCable outlet accessories with assessed quality, including qualification and capability approval. Sectional specification
BS EN 61076-7-001:2004. Connectors for electronic equipmentCable outlet accessories
BS EN 61076-7-100:2006. Connectors for electronic equipment. Product requirementsCable outlet accessories. Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system
BS EN 61077:1992. Specification for helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS. Compact VHS video cassette
BS EN 61078:1994, BS 5760-9:1992,IEC 61078:1991. Reliability of systems, equipment and components. Guide to the block diagram technique
BS EN 61078:2006. Analysis techniques for dependability. Reliability block diagram and Boolean methods
BS EN 61079-1:1995, IEC 61079-1:1992. Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz bandRadio-frequency measurements on outdoor units
BS EN 61079-2:1995, IEC 61079-2:1992. Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz bandElectrical measurements on DBS tuner units
BS EN 61079-3:1995, IEC 61079-3:1993. Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz bandElectrical measurements of overall performance of receiver systems comprising an outdoor unit and a DBS tuner unit
BS EN 61079-5:1995, IEC 61079-5:1993. Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz bandElectrical measurements on decoder units for MAC/packet systems
BS EN 61082-1:1993, IEC 61082-1:1991. Preparation of documents used in electrotechnologyGeneral requirements
BS EN 61082-1:2006. Preparation of documents used in electrotechnologyRules
BS EN 61082-2:1994, IEC 61082-2:1993. Preparation of documents used in electrotechnologyFunction-oriented diagrams
BS EN 61082-3:1994, IEC 61082-3:1993. Preparation of documents used in eletrotechnology.Connection diagrams, tables and lists
BS EN 61082-4:1996, IEC 61082-4:1996. Preparation of documents used in electrotechnologyLocation and installation documents
BS EN 61083-1:1993. Digital recorders for measurements in high-voltage impulse testsRequirements for digital recorders
BS EN 61083-1:2001, IEC 61083-1:2001. Digital recorders for measurements in high-voltage impulse testsRequirements for instruments
BS EN 61083-2:1997. Digital recorders for measurements in high-voltage impulse testsEvaluation of software used for the determination of the parameters of impulse waveforms
BS EN 61083-2:2013. Instruments and software used for measurement in high-voltage and high-current testsRequirements for software for tests with impulse voltages and currents
BS EN 61086-1:1995, IEC 61086-1:1992. Specification for loaded printed wire boards (conformal coatings)Definitions, classification and general requirements
BS EN 61086-2:1995, IEC 61086-2:1992. Specification for loaded printed wire boards (conformal coatings)Methods of test
BS EN 61086-3-1:1995, IEC 61086-3-1:1995. Specification for loaded printed wire boards (conformal coatings). Coatings for loaded printed wire boards (conformal coatings). Part 3. Specifications for individual materials.Coatings for general purpose (class I) and for high reliability (class II)
BS EN 61094-1:1995, IEC 61094-1:1992. Specification for measurement microphonesSpecifications for laboratory standard microphones
BS EN 61094-1:2001, IEC 61094-1:2000. Specification for measurement microphonesSpecifications for laboratory standard microphones
BS EN 61094-2:1994, IEC 61094-2:1992. Specification for measurement microphones.Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
BS EN 61094-2:2009. Electroacoustics. Measurement microphonesPrimary method for pressure calibration of laboratory standard microphones by the reciprocity technique
BS EN 61094-3:1996, IEC 61094-3:1995. Specification for measurement microphonesPrimary method for free-field calibration of laboratory standard microphones by the reciprocity technique
BS EN 61094-4:1996, IEC 61094-4:1995. Specification for measurement microphonesSpecifications for working standard microphones
BS EN 61094-5:2002, IEC 61094-5:2001. Measurement microphonesMethods for pressure calibration of working standard microphones by comparison
BS EN 61094-6:2005. Measurement microphonesElectrostatic actuators for determination of frequency response
BS EN 61094-8:2012. Electroacoustics. Measurement microphonesMethods for determining the free-field sensitivity of working standard microphones by comparison
BS EN 61095:1993. Specification for electromechanical contactors for household and similar purposes
BS EN 61095:2009. Electromechanical contactors for household and similar purposes
BS EN 61096:1993, IEC 61096:1992. Methods of measuring the characteristics of reproducing equipment for digital audio compact discs
BS EN 61097-1:1993, IEC 61097-1:1992. Global maritime distress and safety system (GMDSS)Radar transponder. Marine search and rescue (SART). Operational and performance requirements, methods of testing and required test results
BS EN 61097-1:2007. Global maritime distress and safety system (GMDSS)Radar transponder. Marine search and rescue (SART). Operational and performance requirements, methods of testing and required test results
BS EN 61097-14:2010. Global maritime distress and safety system (GMDSS)AIS search and rescue transmitter (AIS-SART). Operational and performance requirements, methods of testing and required test results
BS EN 61098:2007. Radiation protection instrumentation. Installed personnel surface contamination monitoring assemblies
BS EN 61099:1992, IEC 61099:1992. Specification for unused synthetic organic esters for electrical purposes
BS EN 61099:2010. Insulating liquids. Specifications for unused synthetic organic esters for electrical purposes
BS EN 61100:1993, IEC 61100:1992. Classification of insulating liquids according to fire point and net calorific value
BS EN 61101:1994, IEC 61101:1991. Specification for absolute calibration of hydrophones using the planar scanning technique in the frequency range 0,5 MHz to 15 MHz
BS EN 61102:1994, IEC 61102:1991. Specification for measurement and characterisation of ultrasonic fields using hydrophones in the frequency range 0.5 MHz to 15 MHz
BS EN 61104:1993, IEC 61104:1992. Compact disc video system. 12 cm CD-V
BS EN 61105:1994, IEC 61105:1991. Specification for reference tapes for video tape recorder systems
BS EN 61106:1993, IEC 61106:1993. Videodisks. Methods of measurement for parameters
BS EN 61107:1992, IEC 61107:1992. Data exchange for meter reading, tariff and load control. Direct local data exchange
BS EN 61107:1996, IEC 61107:1996. Data exchange for meter reading, tariff and load control. Direct local data exchange
BS EN 61108-1:1996, IEC 61108-1:1996. Global navigation satellite systems (GNSS)Global positioning system (GPS). Receiver equipment. Performance standards, methods of testing and required test results
BS EN 61108-1:2003. Global navigation satellite systems (GNSS)Global positioning system (GPS). Receiver equipment. Performance standards, methods of testing and required test results
BS EN 61108-2:1998, IEC 61108-2:1998. Global navigation satellite systems (GNSS)Global navigation satellite systems (GLONASS). Receiver equipment. Performance standards, methods of testing and required test results
BS EN 61108-3:2010. Maritime navigation and radiocommunication equipment and systems. Global navigation satellite systems (GNSS)Galileo receiver equipment. Performance requirements, methods of testing and required test results
BS EN 61108-4:2004. Marine navigation and radiocommunication equipment and systems. Global navigation satellite systems (GNSS)Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment. Performance requirements, methods of testing and required test results
BS EN 61109:2008. Insulators for overhead lines. Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1000 V. Definitions, test methods and acceptance criteria
BS EN 611-1:1996. Tin and tin alloys. Pewter and pewterwarePewter
BS EN 61110:1992, IEC 61110:1992. System Omega and differential Omega receivers for ships. Operational and performance requirements. Methods of testing and required test results
BS EN 61111:2009. Live working. Electrical insulating matting
BS EN 61112:2009. Live working. Electrical insulating blankets
BS EN 61114-1:1995, IEC 61114-1:1992. Methods of measurement on receiving antennas for satellite broadcast transmissions in the 12 GHz bandElectrical measurements on DBS receiving antennas
BS EN 61114-1:1999, IEC 61114-1:1999. Methods of measurement on receiving antennas for satellite broadcast transmissions in the 12 GHz bandElectrical measurements
BS EN 61114-2:1997, IEC 61114-2:1996. Methods of measurement on receiving antennas for satellite broadcast transmissions in the 12 GHz bandMechanical and environmental tests on individual and collective receiving antennas
BS EN 61115:1994, IEC 61115:1992. Expression of performance of sample handling systems for process analyzers
BS EN 61116:1995, IEC 61116:1992. Electromechanical equipment guide for small hydroelectric installations
BS EN 61118:1994, IEC 61118:1993. Specification for helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape. Type M2
BS EN 61119-1:1994, IEC 61119-1:1992. Digital audio tape cassette system (DAT)Dimensions and characteristics
BS EN 61119-2:1994, IEC 61119-2:1991. Digital audio tape cassette system (DAT)DAT calibration tape
BS EN 61119-3:1994, IEC 61119-3:1992. Digital audio tape cassette system (DAT)DAT tape properties
BS EN 61119-5:1995, IEC 61119-5:1993. Digital audio tape cassette system (DAT)DAT for professional use
BS EN 61119-6:1994, IEC 61119-6:1992. Digital audio tape cassette system (DAT)Serial copy management system
BS EN 611-2:1997. Tin and tin alloys. Pewter and pewterwarePewterware
BS EN 61120-1:1993, IEC 61120-1:1991. Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional useGeneral requirements
BS EN 61120-2:1994, IEC 61120-2:1991. Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use.Format A
BS EN 61120-3:1994, IEC 61120-3:1991. Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use.Format B
BS EN 61120-4:1993, IEC 61120-4:1992. Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape for professional use.Magnetic tape properties: definitions and methods of measurement
BS EN 61120-5:1996, IEC 61120-5:1995. Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional useReels
BS EN 61121:1994, IEC 61121:1991. Method for measuring the performance of tumbler dryers for household use
BS EN 61121:1999. Tumble dryers for household use. Methods for measuring the performance
BS EN 61121:2005. Tumble dryers for household use. Methods for measuring the performance
BS EN 61122:1994, IEC 61122:1992. Specification for still video floppy disk magnetic recording system
BS EN 61124:2006. Reliability testing. Compliance tests for constant failure rate and constant failure intensity
BS EN 61124:2012. Reliability testing. Compliance tests for constant failure rate and constant failure intensity
BS EN 61125:1993, IEC 61125:1992. Unused hydrocarbon-based insulating liquids. Test methods for evaluating the oxidation stability
BS EN 61129:1994, IEC 61129:1992. Specification for alternating current earthing switches. Induced current switching
BS EN 61131-1:1994, IEC 61131-1:1992. Programmable controllersGeneral information
BS EN 61131-1:2003. Programmable controllersGeneral information
BS EN 61131-2:1995. Programmable controllersEquipment requirements and tests
BS EN 61131-2:2003. Programmable controllersEquipment requirements and tests
BS EN 61131-2:2007. Programmable controllersEquipment requirements and tests
BS EN 61131-3:1993, IEC 61131-3:1993. Programmable controllersProgramming languages
BS EN 61131-3:2003. Programmable controllersProgramming languages
BS EN 61131-3:2013. Programmable controllersProgramming languages
BS EN 61131-5:2001, IEC 61131-5:2000. Programmable controllersCommunications
BS EN 61131-6:2012. Programmable controllersFunctional safety
BS EN 61131-7:2001, IEC 61131-7:2000. Programmable controllersFuzzy control programming
BS EN 61135:1994, IEC 61135:1992. Decca Navigator system:Receivers for ships. Minimum performance standards. Methods of testing and required test results
BS EN 61136-1:1998. Semiconductor power convertors. Adjustable speed electric drive systems. General requirements.Rating specifications, particularly for d.c. motor drives
BS EN 61138:1998. Cables for portable earthing and short-circuiting equipment
BS EN 61138:2007. Cables for portable earthing and short-circuiting equipment
BS EN 61140:2001, IEC 61140:1997. Protection against electric shock. Common aspects for installation and equipment
BS EN 61140:2002+A1:2006, IEC 61140:2001. Protection against electric shock. Common aspects for installation and equipment
BS EN 61142:1993, IEC 61142:1993. Data exchange for meter reading, tariff and load control. Local bus data exchange
BS EN 61143-1:1994. Specification for electrical measuring instruments. X-t recordersDefinitions and requirements
BS EN 61143-2:1994. Specification for electrical measuring instruments. X-t recordersRecommended additional test methods
BS EN 61144:1993, IEC 61144:1992. Test method for the determination of oxygen index of insulating liquids
BS EN 61146-1:1997, IEC 61146-1:1994. Video cameras (PAL/SECAM/NTSC). Method of measurementNon-broadcast single-sensor cameras
BS EN 61146-2:1997, IEC 61146-2:1997. Video cameras (PAL/SECAM/NTSC). Method of measurementTwo- and three-sensor professional cameras
BS EN 61146-3:1997, IEC 61146-3:1997. Video cameras (PAL/SECAM/NTSC). Method of measurementNon-broadcast camera-recorders
BS EN 61146-4:1998. Video cameras (PAL/SECAM/NTSC). Methods of measurementAutomatic functions of video cameras and camera-recorders
BS EN 61148:2012. Terminal markings for valve device stacks and assemblies and for power conversion equipment
BS EN 61150:1994, IEC 61150:1992. Alkaline secondary cells and batteries. Sealed nickel-cadmium rechargeable monobloc batteries in button cell design
BS EN 61152:1994. Specification for dimensions of metal-sheathed thermometer elements
BS EN 61157:1995, IEC 61157:1992. Requirements for the declaration of the acoustic output of medical diagnostic ultrasonic equipment
BS EN 61157:2007+A1:2013. Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment
BS EN 61158-2:1994. Fieldbus standard for use in industrial control systemsPhysical layer specification and service definition
BS EN 61158-2:2004. Digital data communications for measurement and control. Fieldbus for use in industrial control systemsPhysical layer specification and service definition
BS EN 61158-2:2008. Industrial communication networks. Fieldbus specificationsPhysical layer specification and service definition
BS EN 61158-2:2010. Industrial communication networks. Fieldbus specificationsPhysical layer specification and service definition
BS EN 61158-3:2004. Digital data communications for measurement and control. Fieldbus for use in industrial control systemsData link service definition
BS EN 61158-3-1:2008. Industrial communication networks. Fieldbus specificationsData-link layer service definition. Type 1 elements
BS EN 61158-3-11:2008. Industrial communication networks. Fieldbus specificationsData-link layer service definition. Type 11 elements
BS EN 61158-3-12:2008. Industrial communication networks. Fieldbus specificationsData-link layer service definition. Type 12 elements
BS EN 61158-3-12:2012. Industrial communication networks. Fieldbus specificationsData-link layer service definition. Type 12 elements
BS EN 61158-3-13:2008. Industrial communication networks. Fieldbus specificationsData-link layer service definition. Type 13 elements
BS EN 61158-3-14:2008. Industrial communication networks. Fieldbus specificationsData-link layer service definition. Type 14 elements
BS EN 61158-3-14:2012. Industrial communication networks. Fieldbus specificationsData-link layer service definition. Type 14 elements
BS EN 61158-3-16:2008. Industrial communication networks. Fieldbus specificationsData-link layer service definition. Type 16 elements
BS EN 61158-3-17:2008. Industrial communication networks. Fieldbus specificationsData-link layer service definition. Type 17 elements
BS EN 61158-3-18:2008. Industrial communication networks. Fieldbus specificationsData-link layer service definition. Type 18 elements
BS EN 61158-3-19:2008. Industrial communication networks. Fieldbus specificationsData-link layer service definition. Type 19 elements
BS EN 61158-3-19:2012. Industrial communication networks. Fieldbus specificationsData-link layer service definition. Type 19 elements
BS EN 61158-3-2:2008. Industrial communication networks. Fieldbus specificationsData-link layer service definition. Type 2 elements
BS EN 61158-3-21:2012. Industrial communication networks. Fieldbus specificationsData-link layer service definition. Type 21 elements
BS EN 61158-3-22:2012. Industrial communication networks. Fieldbus specificationsData-link layer service definition. Type 22 elements
BS EN 61158-3-3:2008. Industrial communication networks. Fieldbus specificationsData-link layer service definition. Type 3 elements
BS EN 61158-3-4:2008. Industrial communication networks. Fieldbus specificationsData-link layer service definition. Type 4 elements
BS EN 61158-3-7:2008. Industrial communication networks. Fieldbus specificationsData-link layer service definition. Type 7 elements
BS EN 61158-3-8:2008. Industrial communication networks. Fieldbus specificationsData-link layer service definition. Type 8 elements
BS EN 61158-4:2004. Fieldbus standard for use in industrial control systemsData link protocol specification
BS EN 61158-4-1:2008. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 1 elements
BS EN 61158-4-11:2008. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 11 elements
BS EN 61158-4-11:2012. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 11 elements
BS EN 61158-4-12:2008. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 12 elements
BS EN 61158-4-12:2012. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 12 elements
BS EN 61158-4-13:2008. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 13 elements
BS EN 61158-4-14:2008. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 14 elements
BS EN 61158-4-14:2012. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 14 elements
BS EN 61158-4-16:2008. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 16 elements
BS EN 61158-4-17:2008. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 17 elements
BS EN 61158-4-18:2008. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 18 elements
BS EN 61158-4-18:2012. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 18 elements
BS EN 61158-4-19:2008. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 19 elements
BS EN 61158-4-19:2012. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 19 elements
BS EN 61158-4-2:2008. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 2 elements
BS EN 61158-4-2:2012. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 2 elements
BS EN 61158-4-21:2012. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 21 elements
BS EN 61158-4-22:2012. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 22 elements
BS EN 61158-4-3:2008. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 3 elements
BS EN 61158-4-3:2012. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 3 elements
BS EN 61158-4-4:2008. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 4 elements
BS EN 61158-4-7:2008. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 7 elements
BS EN 61158-4-8:2008. Industrial communication networks. Fieldbus specificationsData-link layer protocol specification. Type 8 elements
BS EN 61158-5:2004. Digital data communications for measurement and control. Fieldbus for use in industrial control systemsApplication layer service definition
BS EN 61158-5-10:2008. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 10 elements
BS EN 61158-5-10:2012. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 10 elements
BS EN 61158-5-11:2008. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 11 elements
BS EN 61158-5-12:2008. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 12 elements
BS EN 61158-5-12:2012. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 12 elements
BS EN 61158-5-13:2008. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 13 elements
BS EN 61158-5-14:2008. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 14 elements
BS EN 61158-5-14:2012. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 14 elements
BS EN 61158-5-15:2008. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 15 elements
BS EN 61158-5-15:2012. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 15 elements
BS EN 61158-5-16:2008. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 16 elements
BS EN 61158-5-17:2008. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 17 elements
BS EN 61158-5-18:2008. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 18 elements
BS EN 61158-5-18:2012. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 18 elements
BS EN 61158-5-19:2008. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 19 elements
BS EN 61158-5-19:2012. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 19 elements
BS EN 61158-5-2:2008. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 2 elements
BS EN 61158-5-2:2012. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 2 elements
BS EN 61158-5-20:2008. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 20 elements
BS EN 61158-5-20:2012. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 20 elements
BS EN 61158-5-21:2012. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 21 elements
BS EN 61158-5-22:2012. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 22 elements
BS EN 61158-5-3:2008. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 3 elements
BS EN 61158-5-3:2012. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 3 elements
BS EN 61158-5-4:2008. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 4 elements
BS EN 61158-5-5:2008. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 5 elements
BS EN 61158-5-7:2008. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 7 elements
BS EN 61158-5-8:2008. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 8 elements
BS EN 61158-5-9:2008. Industrial communication networks. Fieldbus specificationsApplication layer service definition. Type 9 elements
BS EN 61158-6:2004 (CD-ROM). Digital data communications for measurement and control. Fieldbus for use in industrial control systemsApplication layer protocol specification
BS EN 61158-6:2004 (COVERS). Digital data communications for measurement and control. Fieldbus for use in industrial control systems
BS EN 61158-6:2004. Digital data communications for measurement and control. Fieldbus for use in industrial control systemsApplication layer protocol specification
BS EN 61158-6-10:2008. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 10 elements
BS EN 61158-6-10:2012. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 10 elements
BS EN 61158-6-11:2008. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 11 elements
BS EN 61158-6-12:2008. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 12 elements
BS EN 61158-6-12:2012. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 12 elements
BS EN 61158-6-13:2008. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 13 elements
BS EN 61158-6-14:2008. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 14 elements
BS EN 61158-6-14:2012. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 14 elements
BS EN 61158-6-15:2008. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 15 elements
BS EN 61158-6-15:2012. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 15 elements
BS EN 61158-6-16:2008. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 16 elements
BS EN 61158-6-17:2008. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 17 elements
BS EN 61158-6-18:2008. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 18 elements
BS EN 61158-6-18:2012. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 18 elements
BS EN 61158-6-19:2008. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 19 elements
BS EN 61158-6-19:2012. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 19 elements
BS EN 61158-6-2:2008. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 2 elements
BS EN 61158-6-2:2012. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 2 elements
BS EN 61158-6-20:2008. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 20 elements
BS EN 61158-6-20:2012. Industrial communication networks. Fieldbus specifications Application layer protocol specification. Type 20 elements
BS EN 61158-6-21:2012. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 21 elements
BS EN 61158-6-22:2012. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 22 elements
BS EN 61158-6-3:2008. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 3 elements
BS EN 61158-6-3:2012. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 3 elements
BS EN 61158-6-4:2008. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 4 elements
BS EN 61158-6-5:2008. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 5 elements
BS EN 61158-6-7:2008. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 7 elements
BS EN 61158-6-8:2008. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 8 elements
BS EN 61158-6-9:2008. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 9 elements
BS EN 61158-6-9:2012. Industrial communication networks. Fieldbus specificationsApplication layer protocol specification. Type 9 elements
BS EN 61160:2005. Design review
BS EN 61161:1995, IEC 61161:1992. Specification for ultrasonic power measurement in liquids in the frequency range 0.5 MHz to 25 MHz
BS EN 61161:2007. Ultrasonics. Power measurement. Radiation force balances and performance requirements
BS EN 61161:2013. Ultrasonics. Power measurement. Radiation force balances and performance requirements
BS EN 61162-1:1996, IEC 61162-1:1995. Maritime navigation and radiocommunication equipment and systems. Digital interfacesSingle talker and multiple listeners
BS EN 61162-1:2001. Maritime navigation and radiocommunication equipment and systems. Digital interfacesSingle talker and multiple listeners
BS EN 61162-1:2008. Maritime navigation and radiocommunication equipment and systems. Digital interfacesSingle talker and multiple listeners
BS EN 61162-1:2011. Maritime navigation and radiocommunication equipment and systems. Digital interfacesSingle talker and multiple listeners
BS EN 61162-2:1999, IEC 61162-2:1998. Maritime navigation and radiocommunication equipment and systems. Digital interfacesSingle talker and multiple listeners, high-speed transmission
BS EN 61162-3:2008+A1:2010. Maritime navigation and radiocommunication equipment and systems. Digital interfacesSerial data instrument network
BS EN 61162-400:2002. Maritime navigation and radiocommunication equipment and systems. Digital interfacesMultiple talkers and multiple listeners. Ship systems interconnection. Introduction and general principles
BS EN 61162-401:2002, IEC 61162-401:2001. Maritime navigation and radiocommunication equipment and systems. Digital interfacesMultiple talkers and multiple listeners. Ship systems interconnection. Application profile
BS EN 61162-402:2005. Maritime navigation and radiocommunication equipment and systems. Digital interfacesMultiple talkers and multiple listeners. Ship systems interconnections. Documentation and test requirements
BS EN 61162-410:2002, IEC 61162-410:2001. Maritime navigation and radiocommunication equipment and systems. Digital interfacesMultiple talkers and multiple listeners. Ship systems interconnection. Transport profile requirements and basic transport profile
BS EN 61162-420:2002, IEC 61162-420:2002. Maritime navigation and radiocommunication equipment and systems. Digital interfacesMultiple talkers and multiple listeners. Ship systems interconnection. Companion standard requirements and basic companion standards
BS EN 61162-450:2011. Maritime navigation and radiocommunication equipment and systems. Digital interfacesMultiple talkers and multiple listeners. Ethernet interconnection
BS EN 61163-1:2006. Reliability stress screeningRepairable assemblies manufactured in lots
BS EN 61164:2004. Reliability growth. Statistical test and estimation methods
BS EN 61165:2006. Application of Markov techniques
BS EN 61166:1993, IEC 61166:1993. Specification for high-voltage alternating current circuit-breakers. Guide for seismic qualification of high-voltage alternating current circuit-breakers
BS EN 61167:1995. Specification for metal halide lamps
BS EN 61167:2011. Metal halide lamps. Performance specification
BS EN 61168:1994, BS 5724-3.129:1994,IEC 61168:1993. Medical electrical equipment. Particular requirements for performance. Methods of declaring functional performance characteristics of radiotherapy simulators
BS EN 61169-1:1996, IEC 61169-1:1992,QC 220000:1992. Radio-frequency connectorsGeneric specification. General requirements and measuring methods
BS EN 61169-1-1:1997, IEC 61169-1-1:1996,QC 220001:1996. Radio-frequency connectors.Single, multi-series, dual-language blank detail specification
BS EN 61169-14:2010. Radio-frequency connectorsR.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw coupling. Characteristic impedance 75 ohms (Type 3,5/12)
BS EN 61169-16:2007. Radio-frequency connectorsSectional specification. RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling. Characteristic impedance 50 ohms (75 ohms) (type N)
BS EN 61169-18:2011. Radio-frequency connectorsSectional specification. Radio frequency coaxial connectors of type SSMA
BS EN 61169-19:2011. Radio-frequency connectorsSectional specification. Radio frequency coaxial connectors of type SSMB
BS EN 61169-2:2002, IEC 61169-2:2001. Radio-frequency connectorsSectional specification. Radio frequency coaxial connectors of type 9,52
BS EN 61169-2:2007. Radio-frequency connectorsSectional specification. Radio frequency coaxial connectors of type 9,52
BS EN 61169-24:2002, IEC 61169-24:2002. Radio-frequency connectorsSectional specification. Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F)
BS EN 61169-24:2009. Radio-frequency connectorsSectional specification. Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (type F)
BS EN 61169-26:2013. Radio-frequency connectorsSectional specification for TNCA series RF coaxial connectors
BS EN 61169-29:2005. Radio-frequency connectorsSectional specification. Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications). Characterisctic impedance 50 ohms (type 1,0/2,3). 50 ohms and 75 ohms applications
BS EN 61169-31:2000, IEC 61169-31:1999,QC 223100:1999. Radio-frequency connectorsRF coaxial connectors with inner diameter of outer conductor 1,0 mm (0,039 in) with screw coupling. Characteristic impedance 50 ohms (type 1,0)
BS EN 61169-32:2000, IEC 61169-32:1999. Radio-frequency connectorsRF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with screw coupling. Characteristic impedance 50 ohms (type 1,85)
BS EN 61169-33:1997, IEC 61169-33:1996,QC 222800:1996. Radio-frequency connectorsSectional specification for series BMA r.f. connectors
BS EN 61169-35:2011. Radio-frequency connectorsSectional specification for 2,92 series RF connectors
BS EN 61169-36:1997, IEC 61169-36:1996,QC 223600:1996. Radio-frequency connectorsMicrominiature r.f. coaxial connectors with snap-on coupling. Characteristic impedance 50 ohms (type MCX)
BS EN 61169-37:2007. Radio-frequency connectorsSectional specification for STWX8 R.F connectors
BS EN 61169-38:2009. Radio-frequency connectorsSectional specification. Radio frequency coaxial connectors model, slide-in (rack and panel applications). Characteristic impedance 50 ohms (type TMA). 50 ohms applications
BS EN 61169-39:2011. Radio-frequency connectorsSectional specification for CQM series quick lock RF connectors
BS EN 61169-40:2011. Radio-frequency connectorsSectional specification for 2.4 series RF connectors
BS EN 61169-41:2011. Radio-frequency connectorsSectional specification for CQA series quick lock R.F. coaxial connectors
BS EN 61169-42:2013. Radio-frequency connectorsSectional specification for CQN series quick lock RF coaxial connectors
BS EN 61169-43:2013. Radio-frequency connectorsSectional specification for RBMA series blind mating RF coaxial connectors
BS EN 61169-44:2013. Radio-frequency connectorsSectional specification for series SMP push-on radio-frequency coaxial connectors
BS EN 61169-47:2012. Radio-frequency connectorsSectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 $GW cable networks (type F-Quick)
BS EN 61169-8:2007. Radio-frequency connectorsSectional specification. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock. Characteristic impedance 50 ohms (type BNC)
BS EN 61173:1995, IEC 61173:1992. Overvoltage protection for photovoltaic (PV) power generating systems. Guide
BS EN 61174:1999, IEC 61174:1998. Maritime navigation and radiocommunication equipment and systems. Electronic chart display and information system (ECDIS). Operational and performance requirements, methods of testing and required test results
BS EN 61174:2001, IEC 61174:2001. Maritime navigation and radiocommunication equipment and systems. Electronic chart display and information system (ECDIS). Operational and performance requirements, methods of testing and required test results
BS EN 61174:2008. Maritime navigation and radiocommunication equipment and systems. Electronic chart display and information system (ECDIS). Operational and performance requirements, methods of testing and required test results
BS EN 61175:1993, IEC 61175:1993. Designations for signals and connections
BS EN 61175:2005. Industrial systems, installation and equipment and industrial products. Designation of signals
BS EN 61176:1994, IEC 61176:1993. Hand-held electric mains voltage operated circular saws. Methods for measuring the performance
BS EN 61179:1993, IEC 61179:1993. Specification for helical-scan digital composite video cassette recording system using 19 mm magnetic tape, format D2 (NTSC, PAL, PAL-M)
BS EN 61180-1:1995, IEC 61180-1:1992. High-voltage test techniques for low-voltage equipmentDefinitions, test and procedure requirements
BS EN 61180-2:1995, IEC 61180-2:1994. High-voltage test techniques for low-voltage equipmentTest equipment
BS EN 61181:1993, IEC 61181:1993. Impregnated insulating materials. Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
BS EN 61181:2007+A1:2012. Mineral oil-filled electrical equipment. Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
BS EN 61182-2-2:2012. Printed board assembly products. Manufacturing description data and transfer methodologySectional requirements for implementation of printed board fabrication data description
BS EN 61182-7:1996, IEC 61182-7:1995. Printed boards. Electronic data description and transferBare board electric test information in digital form
BS EN 61183:1995, IEC 61183:1994. Electroacoustics. Random-incidence and diffuse-field calibration of sound level meters
BS EN 61184:1995. Bayonet lampholders
BS EN 61184:1997, IEC 61184:1997. Bayonet lampholders
BS EN 61184:2008+A1:2011. Bayonet lampholders
BS EN 61185:1997, IEC 61185:1992. Magnetic oxide cores. (ETD-cores) intended for use in power supply applications. Dimensions
BS EN 61185:2005. Ferrite cores (ETD-cores) intended for use in power supply applications. Dimensions
BS EN 61187:1996. Electrical and electronic measuring equipment. Documentation
BS EN 61188-1-1:1997, IEC 61188-1-1:1997. Printed boards and assemblies. Design and use. Generic requirementsFlatness considerations for electronic assemblies
BS EN 61188-1-2:1998, IEC 61188-1-2:1998. Printed boards and assemblies. Design and use. Generic requirementsGeneric requirements. Controlled impedance
BS EN 61188-5-1:2002. Printed boards and assemblies. Design and use. Attachment (land/joint) considerationsAttachment (land/joint) considerations. Generic requirements
BS EN 61188-5-2:2003. Printed boards and assemblies. Design and use. Attachment (land/joint) considerationsDiscrete components
BS EN 61188-5-3:2007. Printed boards and printed board assemblies. Design and useAttachment (land/joint) considerations. Components with gull- wing leads on two sides
BS EN 61188-5-4:2007. Printed boards and printed board assemblies. Design and useAttachments (land/joint) considerations. Components with J leads on two sides
BS EN 61188-5-5:2007. Printed boards and printed board assemblies. Design and useAttachment (land/joint) considerations. Components with gull- wing leads on four sides
BS EN 61188-5-6:2003. Printed boards and assemblies. Design and use. Attachment (land/joint) considerationsChip carriers with J-leads on four sides
BS EN 61188-5-8:2008. Printed boards and printed board assemblies. Design and useAttachments (land/joint) considerations. Area array components (BGA, FBGA, CGA, LGA)
BS EN 61188-7:2009. Printed boards and printed board assemblies. Design and useElectronic component zero orientation for CAD library construction
BS EN 61189-1:1997, IEC 61189-1:1997. Test methods for electrical materials, printed boards and other interconnection structures and assembliesGeneral test methods and methodology
BS EN 61189-11:2013. Test methods for electrical materials, printed boards and other interconnection structures and assembliesMeasurement of melting temperature or melting temperature ranges of solder alloys
BS EN 61189-2:1997, IEC 61189-2:1997. Test methods for electrical materials, printed boards and other interconnection structures and assembliesTest methods for materials for interconnection structures
BS EN 61189-2:2006. Test methods for electrical materials, printed boards and other interconnection structures and assembliesTest methods for materials for interconnection structures
BS EN 61189-3:1997, IEC 61189-3:1997. Test methods for electrical materials, printed boards and other interconnection structures and assembliesTest methods for interconnection structures (printed boards)
BS EN 61189-3:2008. Test methods for electrical materials, printed boards and other interconnection structures and assembliesTest methods for interconnection structures (printed boards)
BS EN 61189-5:2006. Test methods for electrical materials, interconnection structures and assembliesTest methods for printed board assemblies
BS EN 61189-6:2006. Test methods for electrical materials, interconnection structures and assembliesTest methods for materials used in manufacturing electronic assemblies
BS EN 61190-1-1:2002. Attachment materials for electronic assembly.Requirements for soldering fluxes for high-quality interconnections in electronics assembly
BS EN 61190-1-2:2002. Attachment materials for electronic assembly.Requirements for solder pastes for high-quality interconnections in electronic assembly
BS EN 61190-1-2:2007. Attachment materials for electronic assemblyRequirements for soldering pastes for high-quality interconnects in electronics assembly
BS EN 61190-1-3:2002. Attachment materials for electronic assembly.Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications
BS EN 61190-1-3:2007+A1:2010. Attachment materials for electronic assemblyRequirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications
BS EN 61191-1:1999, IEC 61191-1:1998. Printed board assembliesGeneric specification. Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies
BS EN 61191-1:2013. Printed board assembliesGeneric specification. Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies
BS EN 61191-2:1999, IEC 61191-2:1998. Printed board assembliesSectional specification. Requirements for surface mount soldered assemblies
BS EN 61191-2:2013. Printed board assembliesSectional specification. Requirements for surface mount soldered assemblies
BS EN 61191-3:1999, IEC 61191-3:1998. Printed board assembliesSectional specification. Requirements for through-hole mount soldered assemblies
BS EN 61191-4:1999, IEC 61191-4:1998. Printed board assembliesSectional specification. Requirements for terminal soldered assemblies
BS EN 61191-6:2010. Printed board assembliesEvaluation criteria for voids in soldered joints of BGA and LGA and measurement methods
BS EN 61192-1:2003. Workmanship requirements for soldered electronic assembliesGeneral
BS EN 61192-2:2003. Workmanship requirements for soldered electronic assembliesSurface-mount assemblies
BS EN 61192-3:2003. Workmanship requirements for soldered electronic assembliesThrough-hole mount assemblies
BS EN 61192-4:2003. Workmanship requirements for soldered electronic assembliesTerminal assemblies
BS EN 61192-5:2007. Workmanship requirements for soldered electric assembliesRework, modification and repair of soldered electronic assemblies
BS EN 61193-1:2002, IEC 61193-1:2001. Quality assessment systemsRegistration and analysis of defects on printed board assemblies
BS EN 61193-2:2007. Quality assessment systemsSelection and use of sampling plans for inspection of electronic components and packages
BS EN 61193-3:2013. Quality assessment systemsSelection and use of sampling plans for printed board and laminate end-product and in-process auditing
BS EN 61194:1996. Characteristic parameters of stand-alone photovoltaic (PV) systems
BS EN 61195:1994, IEC 61195:1993. Double-capped fluorescent lamps. Safety specifications
BS EN 61195:1999+A1:2013, IEC 61195:1999. Double-capped fluorescent lamps. Safety specifications
BS EN 61196-2:1997, IEC 61196-2:1993. Radio-frequency cables. Specifications.Semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation. Sectional specification
BS EN 61196-2:2003. Radio-frequency cables. Specifications.Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation
BS EN 61196-3:1999 (R06). Radio-frequency cables. SpecificationsSectional specification for coaxial cables for local area networks
BS EN 61196-3:1999, IEC 61196-3:1998. Radio-frequency cables. SpecificationsSectional specification for coaxial cables for local area networks
BS EN 61196-3-2:1998, IEC 61196-3-2:1997. Radio-frequency cables. Specifications. Coaxial cables for digital communication in horizontal floor wiringDetail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s
BS EN 61196-3-3:1998, IEC 61196-3-3:1997. Radio-frequency cables. Specifications. Coaxial cables for digital communication in horizontal floor wiringDetail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s
BS EN 61196-4:2004. Coaxial communication cablesSectional specification for radiating cables
BS EN 61197:1996, IEC 61197:1993. Insulating liquids. Linear flame propagation. Test method using a glass-fibre tape
BS EN 61198:1994, IEC 61198:1993. Mineral insulating oils. Methods for the determination of 2-furfural and related compounds
BS EN 61199:1994, IEC 61199:1993. Single-capped fluorescent lamps. Safety specifications
BS EN 61199:2000, IEC 61199:1999. Single-capped fluorescent lamps. Safety specifications
BS EN 61199:2011+A1:2013. Single-capped fluorescent lamps. Safety specifications
BS EN 612:1996. Eaves gutters and rainwater down-pipes of metal sheet. Definitions, classifications and requirements
BS EN 612:2005. Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet
BS EN 61202-1:2000, IEC 61202-1:2000. Fibre optic isolatorsGeneric specification
BS EN 61202-1:2009. Fibre optic interconnecting devices and passive components. Fibre optic isolatorsGeneric specification
BS EN 61203:1995, IEC 61203:1992. Synthetic organic esters for electrical purposes. Guide for maintenance of transformer esters in equipment
BS EN 61204:1995. Low-voltage power supply devices, d.c. output. Performance characteristics and safety requirements
BS EN 61204-3:2001, IEC 61204-3:2000. Low voltage power supplies, d.c. outputElectromagnetic compatibility (EMC)
BS EN 61204-6:2001, IEC 61204-6:2000. Low voltage power supplies, d.c. outputRequirements for low-voltage power supplies of assessed performance
BS EN 61204-7:2006. Low-voltage power supplies, d.c. outputSafety requirements
BS EN 61205:1994, IEC 61205:1993. Specification for ultrasonics. Dental descaler systems. Measurement and declaration of the output characteristics
BS EN 61206:1995, IEC 61206:1993. Ultrasonics. Continuous-wave Doppler systems. Test procedures
BS EN 61207-1:1994, IEC 61207-1:1994. Expression of performance of gas analyzersGeneral
BS EN 61207-1:2010. Expression of performance of gas analyzersGeneral
BS EN 61207-2:1994, IEC 61207-2:1994. Expression of performance of gas analyzersOxygen in gas (utilizing high-temperature electrochemical sensors)
BS EN 61207-3:2002. Expression of performance of gas analyzersParamagnetic oxygen analyzers
BS EN 61207-6:1994, IEC 61207-6:1994. Expression of performance of gas analyzersPhotometric analyzers
BS EN 61209:1999, IEC 61209:1999. Maritime navigation and radiocommunication equipment and systems. Integrated bridge systems (IBS). Operational and performance requirements, methods of testing and required test results
BS EN 61210:1995. Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements
BS EN 61210:2010. Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements
BS EN 61211:2005. Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1000 V. Impulse puncture testing in air
BS EN 61212-1:1996. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposesGeneral requirements
BS EN 61212-1:2006. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposesDefinitions, designations and general requirements
BS EN 61212-2:1996. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposesMethods of test
BS EN 61212-2:2006. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposesMethods of test
BS EN 61212-3-1:1996. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual materialsRound laminated rolled tubes
BS EN 61212-3-1:2006. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposesSpecifications for individual materials
BS EN 61212-3-1:2013. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposesSpecifications for individual materials. Sheet 1: Round laminated rolled tubes
BS EN 61212-3-2:1996. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual materialsRound laminated moulded tubes
BS EN 61212-3-2:2006. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposesSpecifications for individual materials
BS EN 61212-3-2:2013. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposesSpecifications for individual materials. Sheet 2: Round laminated moulded tubes
BS EN 61212-3-3:1996. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual materialsRound laminated moulded rods
BS EN 61212-3-3:2006. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposesSpecifications for individual materials
BS EN 61213:1994, IEC 61213:1993. Analogue audio recording on video tape. Polarity of magnetization
BS EN 61215:1995, IEC 61215:1993. Crystalline silicon terrestrial photovoltaic (PV) modules. Design qualification and type approval
BS EN 61215:2005. Crystalline silicon terrestrial photovoltaic (PV) modules. Design qualification and type approval
BS EN 61217:1996+A2:2008, IEC 61217:1996. Radiotherapy equipment. Coordinates, movements and scales
BS EN 61217:2012. Radiotherapy equipment. Coordinates, movements and scales
BS EN 61219:1994. Live working. Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device. Lance earthing
BS EN 61220:1995, IEC 61220:1993. Ultrasonics. Fields. Guidance for the measurement and characterization of ultrasonic fields generated by medical ultrasonic equipment using hydrophones in the frequency range 0.5 MHz to 15 MHz
BS EN 61221:1996, IEC 61221:1993. Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category ISO-L-TCD). Specifications
BS EN 61221:2004. Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category ISO-L-TCD). Specifications
BS EN 61223-2-4:1995, BS 7725-2.4:1995,IEC 61223-2-4:1994. Evaluation and routine testing in medical imaging departments. Constancy testsMethod for hard copy cameras
BS EN 61223-2-5:1995, BS 7725-2.5:1995,IEC 61223-2-5:1994. Evaluation and routine testing in medical imaging departments. Constancy testsMethod for image display devices
BS EN 61223-2-6:1995, BS 7725-2.6:1995,IEC 61223-2-6:1994. Evaluation and routine testing in medical imaging departments. Constancy testsMethod for X-ray equipment for computed tomography
BS EN 61223-2-6:2007. Evaluation and routine testing in medical imaging departmentsConstancy tests. Imaging performance of computed tomography X-ray equipment
BS EN 61223-3-1:1999, IEC 61223-3-1:1999. Evaluation and routine testing in medical imaging departmentsAcceptance tests
BS EN 61223-3-2:1997, BS 7725-3.2:1997,IEC 61223-3-2:1996. Evaluation and routine testing in medical imaging departmentsAcceptance tests
BS EN 61223-3-2:2008. Evaluation and routine testing in medical imaging departmentsAcceptance tests. Imaging performance of mammographic X-ray equipment
BS EN 61223-3-3:1997, BS 7725-3.3:1997,IEC 61223-3-3:1996. Evaluation and routine testing in medical imaging departmentsAcceptance tests
BS EN 61223-3-4:2000, IEC 61223-3-4:2000. Evaluation and routine testing in medical imaging departmentsAcceptance tests
BS EN 61223-3-5:2004. Evaluation and routine testing in medical imaging departmentsAcceptance tests
BS EN 61226:2010. Nuclear power plants. Instrumentation and control important to safety. Classification of instrumentation and control functions
BS EN 61228:1995, IEC 61228:1993. Method of measuring and specifying the UV radiation of ultraviolet lamps used for sun-tanning
BS EN 61228:2008. Fluorescent ultraviolet lamps used for tanning. Measurement and specification method
BS EN 61229:1996. Rigid protective covers for live working on a.c. installations
BS EN 61230:1996. Live working. Portable equipment for earthing or earthing and short-circuiting
BS EN 61230:2008. Live working. Portable equipment for earthing or earthing and short-circuiting
BS EN 61231:2010+A1:2013. International lamp coding system (ILCOS)
BS EN 61232:1997. Aluminium-clad steel wires for electrical purposes
BS EN 61234-1:1994, IEC 61234-1:1994. Method of test for hydrolytic stability of electrical insulating materialsMethod of test for hydrolytic stability of electrical insulating materials. Plastic films
BS EN 61234-2:1998, IEC 61234-2:1997. Method of test for hydrolytic stability of electrical insulating materialsMoulded thermosets
BS EN 61235:1995. Live working. Insulating hollow tubes for electrical purposes
BS EN 61236:1995. Saddles, pole clamps (stick clamps) and accessories for live working
BS EN 61236:2011. Live working. Saddles, stick clamps and their accessories
BS EN 61237-1:1994, IEC 61237-1:1994. Broadcast video tape recorders. Methods of measurementMechanical measurements
BS EN 61237-2:1995, IEC 61237-2:1995. Broadcast video tape recorders. Methods of measurementElectrical measurements of analogue composite video signals
BS EN 61237-3:1995, IEC 61237-3:1995. Broadcast video tape recorders. Methods of measurementElectrical measurements for analogue component video signals
BS EN 61237-4:1998, IEC 61237-4:1997. Broadcast video tape recorders. Methods of measurementAnalogue audio performance measurements
BS EN 61240:1997, IEC 61240:1994. Piezoelectric devices. Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection. General rules
BS EN 61240:2012. Piezoelectric devices. Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection. General rules
BS EN 61241-0:2006. Electrical apparatus for use in the presence of combustible dustGeneral requirements
BS EN 61241-1:2004. Electrical apparatus for use in the presence of combustible dustProtection by enclosures "tD"
BS EN 61241-10:2004. Electrical apparatus for use in the presence of combustible dustClassification of areas where combustible dusts are or may be present
BS EN 61241-11:2006. Electrical apparatus for use in the presence of combustible dustProtection by intrinsic safety "iD"
BS EN 61241-14:2004. Electrical apparatus for use in the presence of combustible dustSelection and installation
BS EN 61241-17:2005. Electrical apparatus for use in the presence of combustible dustInspection and maintenance of electrical installations in hazardous areas (other than mines)
BS EN 61241-18:2004. Electrical apparatus for use in the presence of combustible dustProtection by encapsulation 'mD'
BS EN 61241-2-2:1996. Electrical apparatus for use in the presence of combustible dust. Test methodsMethod for determining the electrical resistivity of dust in layers
BS EN 61241-4:2006. Electrical apparatus for use in the presence of combustible dustType of protection "pD"
BS EN 61242:1997+A1:2008. Electrical accessories. Cable reels for household and similar purposes
BS EN 61243-1:1998. Live working. Voltage detectorsCapacitive type to be used for voltages exceeding 1 kV a.c.
BS EN 61243-1:2005+A1:2010. Live working. Voltage detectorsCapacitive type to be used for voltages exceeding 1 kV a.c.
BS EN 61243-2:1998. Live working. Voltage detectorsResistive type to be used for voltages of 1 kV to 36 kV a.c.
BS EN 61243-3:1999, IEC 61243-3:1998. Live working. Voltage detectorsTwo-pole low voltage type
BS EN 61243-3:2010. Live working. Voltage detectorsTwo-pole low-voltage type
BS EN 61243-5:2001. Live working. Voltage detectorsVoltage detecting systems (VDS)
BS EN 61247:1997, IEC 61247:1995. PM-cores made of magnetic oxides and associated parts. Dimensions
BS EN 61248-1:1997, IEC 61248-1:1996. Transformers and inductors for use in electronic and telecommunication equipmentGeneric specification
BS EN 61248-2:1997, IEC 61248-2:1996. Transformers and inductors for use in electronic and telecommunication equipmentSectional specification for signal transformers on the basis of the capability approval procedure
BS EN 61248-3:1997, IEC 61248-3:1996. Transformers and inductors for use in electronic and telecommunication equipmentSectional specification for power transformers on the basis of the capability approval procedure
BS EN 61248-4:1997, IEC 61248-4:1996. Transformers and inductors for use in electronic and telecommunication equipmentSectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure
BS EN 61248-5:1997, IEC 61248-5:1996. Transformers and inductors for use in electronic and telecommunication equipmentSectional specification for pulse transformers on the basis of the capability approval procedure
BS EN 61248-6:1997, IEC 61248-6:1996. Transformers and inductors for use in electronic and telecommunication equipmentSectional specification for inductors on the basis of the capability approval procedure
BS EN 61248-7:1998, IEC 61248-7:1997. Transformers and inductors for use in electronic and telecommunication equipmentSectional specification for high-frequency inductors and intermediate transformers on the basis of the capability approval procedure
BS EN 61249-2-1:2005. Materials for printed boards and other interconnecting structuresReinforced base materials, clad and unclad. Phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad
BS EN 61249-2-10:2003. Materials for printed boards and other interconnecting structuresReinforced base materials clad and unclad. Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
BS EN 61249-2-11:2003. Materials for printed boards and other interconnecting structuresReinforced base materials, clad and unclad
BS EN 61249-2-12:1999, IEC 61249-2-12:1999. Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and uncladEpoxide non-woven aramid laminate of defined flammability, copper-clad
BS EN 61249-2-13:1999, IEC 61249-2-13:1999. Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and uncladCyanate ester non-woven aramid laminate of defined flammability, copper-clad
BS EN 61249-2-18:2002, IEC 61249-2-18:2002. Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and uncladPolyester non-woven fibreglass reinforced laminated sheet of defined flammability (vertical burning test), copper clad
BS EN 61249-2-19:2002, IEC 61249-2-19:2001. Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and uncladEpoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test) copper clad
BS EN 61249-2-2:2005. Materials for printed boards and other interconnecting structuresReinforced base materials, clad and unclad
BS EN 61249-2-21:2003. Materials for printed boards and other interconnecting structuresReinforced base materials, clad and unclad
BS EN 61249-2-22:2005. Materials for printed boards and other interconnecting structuresReinforced base materials, clad and unclad
BS EN 61249-2-23:2005. Materials for printed boards and other interconnecting structuresReinforced base materials, clad and unclad
BS EN 61249-2-26:2005. Materials for printed boards and other interconnecting structuresReinforced base materials, clad and unclad. Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
BS EN 61249-2-27:2013. Materials for printed boards and other interconnecting structuresReinforced base materials clad and unclad. Bismaleimide/triazine modified with non-halogenated epoxide woven glass laminate sheets of defined flammability (vertical burning test), copper-clad
BS EN 61249-2-30:2013. Materials for printed boards and other interconnecting structuresReinforced base materials clad and unclad. Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad
BS EN 61249-2-35:2009. Materials for printed boards and other interconnecting structuresReinforced base materials, clad and unclad. Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
BS EN 61249-2-36:2009. Materials for printed boards and other interconnecting structuresReinforced base materials, clad and unclad. Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
BS EN 61249-2-37:2009. Materials for printed boards and other interconnecting structuresReinforced base materials, clad and unclad. Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
BS EN 61249-2-38:2009. Materials for printed boards and other interconnecting structuresReinforced base materials, clad and unclad. Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
BS EN 61249-2-39:2013. Materials for printed boards and other interconnecting structuresReinforced base materials clad and unclad. High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
BS EN 61249-2-4:2002, IEC 61249-2-4:2001. Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and uncladPolyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad
BS EN 61249-2-40:2013. Materials for printed boards and other interconnecting structuresReinforced base materials clad and unclad. High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
BS EN 61249-2-41:2010. Materials for printed boards and other interconnecting structuresReinforced base materials clad and unclad. Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
BS EN 61249-2-42:2010. Materials for printed boards and other interconnecting structuresReinforced base materials clad and unclad. Brominated epoxide non-woven / woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
BS EN 61249-2-5:2003. Materials for printed boards and other interconnecting structuresReinforced base materials, clad and unclad
BS EN 61249-2-6:2003. Materials for printed boards and other interconnecting structuresReinforced base materials, clad and unclad
BS EN 61249-2-7:2002. Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and uncladEpoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad
BS EN 61249-2-8:2003. Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and uncladReinforced base materials clad and unclad. Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
BS EN 61249-2-9:2003. Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and uncladReinforced base materials clad and unclad. Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
BS EN 61249-3-3:1999, IEC 61249-3-3:1999. Materials for interconnection structures. Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards)Adhesive coated flexible polyester film
BS EN 61249-3-4:1999, IEC 61249-3-4:1999. Materials for interconnection structures. Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards)Adhesive coated flexible polyimide film
BS EN 61249-3-5:1999, IEC 61249-3-5:1999. Materials for interconnection structures. Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards)Transfer adhesive films for flexible printed boards
BS EN 61249-4-1:2008. Materials for printed boards and other interconnecting structuresSectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Epoxide woven E-glass prepreg of defined flammability
BS EN 61249-4-11:2005. Materials for printed boards and other interconnecting structuresSectional specification set for prepreg materials, unclad. Non-halogenated epoxide woven E-glass prepeg of defined flammability
BS EN 61249-4-12:2005. Materials for printed boards and other interconnecting structuresSectional specification set for prepreg materials, unclad. Non-halogenated multifuctional epoxide woven E-glass prepeg of defined flammability
BS EN 61249-4-14:2009. Materials for printed boards and other interconnecting structuresSectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) Epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
BS EN 61249-4-15:2009. Materials for printed boards and other interconnecting structuresSectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Multifunctional epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
BS EN 61249-4-16:2009. Materials for printed boards and other interconnecting structuresSectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
BS EN 61249-4-17:2009. Materials for printed boards and other interconnecting structuresSectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
BS EN 61249-4-2:2005. Materials for printed boards and other interconnecting structuresSectional specification set for prepreg materials, unclad. Multifunctional expoxide woven E-glass prepeg of defined flammability
BS EN 61249-4-5:2005. Materials for printed boards and other interconnecting structuresSectional specification set for prepreg materials, unclad Polymide, modified or unmodified, woven E-glass prepeg of defined flammability
BS EN 61249-5-1:1996, IEC 61249-5-1:1995. Materials for interconnection structures. Sectional specification set for conductive foils and films with and without coatingsCopper foils (for the manufacture of copper-clad base materials)
BS EN 61249-5-4:1997, IEC 61249-5-4:1996. Materials for interconnection structures. Sectional specification set for conductive foils and films with and without coatingsConductive inks
BS EN 61249-7-1:1996, IEC 61249-7-1:1995. Materials for interconnection structures. Sectional specification set for restraining core materialsCopper/invar/copper
BS EN 61249-8-7:1997, IEC 61249-8-7:1996. Materials for interconnection structures. Sectional specification set for non-conductive films and coatingsMarking legend inks
BS EN 61249-8-8:1997, IEC 61249-8-8:1997. Materials for interconnection structures. Sectional specification set for non-conductive films and coatingsTemporary polymer coatings
BS EN 61252:1997, IEC 61252:1993. Electroacoustics. Specifications for personal sound exposure meters
BS EN 61254:1994, IEC 61254:1993. Electric shavers for household use. Methods for measuring the performance
BS EN 61255:1995, IEC 61255:1994. Household electric heating pads. Methods for measuring performance
BS EN 61259:1995, IEC 61259:1994. Gas-insulated metal-enclosed switchgear for rated voltages 72,5 kV and above. Requirements for switching of bus-charging currents by disconnectors
BS EN 61260:1996, IEC 61260:1995. Electroacoustics. Octave-band and fractional-octave-band filters
BS EN 61262-1:1995, IEC 61262-1:1994. Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment.Determination of the entrance field size
BS EN 61262-2:1995, IEC 61262-2:1994. Characteristics of electro-optical X-ray image intensifiers for medical electrical equipmentDetermination of the conversion factor
BS EN 61262-3:1995, IEC 61262-3:1994. Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment.Determination of the luminance distribution and luminance non-uniformity
BS EN 61262-4:1995, IEC 61262-4:1994. Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment.Determination of the image distortion
BS EN 61262-5:1995, IEC 61262-5:1994. Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment.Determination of the detective quantum efficiency
BS EN 61262-6:1995, IEC 61262-6:1994. Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment.Determination of the contrast ratio and veiling glare index
BS EN 61262-7:1996, IEC 61262-7:1995. Characteristics of electro-optical X-ray image intensifiers for medical electrical equipmentDetermination of the modulation transfer function
BS EN 61264:1999, IEC 61264:1998. Ceramic pressurized hollow insulators for high-voltage switchgear and controlgear
BS EN 61265:1995, IEC 61265:1995. Electroacoustics. Instruments for measurement of aircraft noise. Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aircraft
BS EN 61266:1995, IEC 61266:1994. Ultrasonics. Hand-held probe Doppler foetal heartbeat detectors. Performance requirements and methods of measurement and reporting
BS EN 61267:1995, IEC 61267:1994. Radiation conditions for use in the determination of characteristics for medical diagnostic X-ray equipment
BS EN 61267:2006. Medical diagnostic X-ray equipment. Radiation conditions for use in the determination of characteristics
BS EN 61268:1996, IEC 61268:1995. Alternating current static var-hour meters for reactive energy (classes 2 and 3)
BS EN 61269-1:1997, IEC 61269-1:1994. Fibre optic terminus setsGeneric specification
BS EN 61269-1-1:1997, IEC 61269-1-1:1994. Fibre optic terminus sets.Blank detail specification
BS EN 61270-1:1998, IEC 61270-1:1996. Capacitors for microwave ovensGeneral
BS EN 61274-1:1997, IEC 61274-1:1994. Fibre optic adaptorsGeneric specification
BS EN 61274-1:2008. Adaptors for fibre optic connectorsGeneric specification
BS EN 61274-1:2012. Fibre optic interconnecting devices and passive components. Adaptors for fibre optic connectorsGeneric specification
BS EN 61274-1-1:1997, IEC 61274-1-1:1994. Fibre optic adaptors.Blank detail specification
BS EN 61274-1-1:2006. Adaptors for fibre optic connectorsBlank detail specification
BS EN 61274-1-1:2012. Fibre optic interconnecting devices and passive components. Adaptors for fibre optic connectorsBlank detail specification
BS EN 61277:1998, IEC 61277:1995. Terrestial photovoltaic (PV) power generating systems. General and guide
BS EN 61280-1-1:1998, IEC 61280-1-1:1998. Optical fibre amplifiers. Basic spectrum analyzers.Transmitter output optical power measurement for single-mode optical fibre cable
BS EN 61280-1-1:2013. Fibre optic communication subsystem basic test proceduresTest procedures for general communication subsystems. Transmitter output optical power measurement for single-mode optical fibre cable
BS EN 61280-1-3:1999, IEC 61280-1-3:1998. Fibre optic communication subsystem basic test procedures. Test procedures for general communication subsystemsCentral wavelength and spectral width measurement
BS EN 61280-1-3:2010. Fibre optic communication subsystem test proceduresGeneral communication subsystems. Central wavelength and spectral width measurement
BS EN 61280-1-4:2003. Fibre optic communication subsystem basic test procedures. Test procedures for general communication subsystemsCollection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters
BS EN 61280-1-4:2010. Fibre optic communication subsystem test proceduresGeneral communication subsystems. Light source encircled flux measurement method
BS EN 61280-2-1:1999, IEC 61280-2-1:1998. Fibre optic communication subsystem basic test procedures. Test procedures for digital systemsReceiver sensitivity and overload measurement
BS EN 61280-2-1:2010. Fibre optic communication subsystem test proceduresDigital systems. Receiver sensitivity and overload measurement
BS EN 61280-2-10:2005. Fibre optic communication subsystem test proceduresDigital systems
BS EN 61280-2-11:2006. Fibre optic communication subsystem test proceduresDigital systems
BS EN 61280-2-2:1999, IEC 61280-2-2:1998. Fibre optic communication subsystem basic test procedures. Test procedures for digital systemsOptical eye pattern, waveform, and extinction ratio
BS EN 61280-2-2:2005. Fibre optic communication subsystem test proceduresDigital systems
BS EN 61280-2-2:2008. Fibre optic communication subsystem test proceduresDigital systems. Optical eye pattern, waveform and extinction ratio measurement
BS EN 61280-2-2:2012. Fibre optic communication subsystem test proceduresDigital systems. Optical eye pattern, waveform and extinction ratio measurement
BS EN 61280-2-3:2009. Fibre optic communication subsystem test proceduresDigital systems. Jitter and wander measurements
BS EN 61280-2-4:1998, IEC 61280-2-4:1998. Fibre optic communication subsystem basic test procedures. Test procedures for digital systemsBit-rate tolerance measurement
BS EN 61280-2-5:1998, IEC 61280-2-5:1998. Fibre optic communication subsystem basic test procedures. Test procedures for digital systemsJitter transfer function measurement
BS EN 61280-2-8:2003. Fibre optic communication subsystem basic test procedures. Test procedures for digital systemsDetermination of low BER using Q-factor measurements
BS EN 61280-2-9:2002. Fibre optic communication subsystem basic test procedures. Test procedures for digital systemsOptical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems
BS EN 61280-2-9:2009. Fibre optic communication subsystem test proceduresDigital systems. Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems
BS EN 61280-4-1:2004. Fibre-optic communication subsystem test proceduresCable plant and links. Multimode fibre optic cable plant attenuation measurement
BS EN 61280-4-1:2009. Fibre optic communication subsystem test proceduresInstalled cable plant. Multimode attenuation measurement
BS EN 61280-4-2:2000, IEC 61280-4-2:1999. Fibre optic communication subsystem basic test procedures. Fibre optic cable plantSingle-mode fibre optic cable plant attenuation
BS EN 61280-4-4:2006. Fibre optic communication subsystem basic test proceduresCable plants and links
BS EN 61281-1:1999, IEC 61281-1:1999. Fibre optic communication subsystemsGeneric specification
BS EN 61284:1996, IEC 61284:1995. Overhead lines. Requirements and tests for fittings
BS EN 61284:1998, IEC 61284:1997. Overhead lines. Requirements and tests for fittings
BS EN 61285:1995, IEC 61285:1994. Industrial-process control. Safety of analyser houses
BS EN 61285:2004. Industrial-process control. Safety of analyser houses
BS EN 61286:1996, IEC 61286:1995. Information technology. Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange
BS EN 61286:2002. Information technology. Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange
BS EN 61287-1:2006. Railway applications. Power convertors installed on board rolling stockCharacteristics and test methods
BS EN 61290-10-1:2003. Optical amplifiers. Test methodsMultichannel parameters. Pulse method using an optical switch and optical spectrum analyzer
BS EN 61290-10-1:2009. Optical amplifiers. Test methodsMultichannel parameters. Pulse method using an optical switch and optical spectrum analyzer
BS EN 61290-10-2:2003. Optical amplifiers. Test methodsMultichannel parameters. Pulse method using a gated optical spectrum analyzer
BS EN 61290-10-2:2008. Optical amplifiers. Test methodsMultichannel parameters. Pulse method using a gated optical spectrum analyzer
BS EN 61290-10-3:2003. Optical amplifiers. Test methodsMultichannel parameters. Probe methods
BS EN 61290-10-4:2007. Optical amplifiers. Test methodsMultichannel parameters. Interpolated source subtraction method using an optical spectrum analyzer
BS EN 61290-1-1:1998, IEC 61290-1-1:1998. Optical spectrum analyzer
BS EN 61290-1-1:2006. Optical amplifiers. Test methodsPower and gain parameters
BS EN 61290-11-1:2003. Optical fibre amplifiers. Basic specification. Polarization mode dispersionJones matrix eigenanalysis method (JME)
BS EN 61290-11-1:2008. Optical amplifiers. Test methodsPolarization mode dispersion parameter. Jones matrix eigenanalysis (JME)
BS EN 61290-11-2:2005. Optical amplifiers. Test methodsPolarization mode dispersion parameter
BS EN 61290-1-2:1998, IEC 61290-1-2:1998. Optical fibre amplifiers. Basic specification.Test methods for gain parameters. Electrical spectrum analyzer
BS EN 61290-1-2:2005. Optical amplifiers. Test methodsPower and gain parameters
BS EN 61290-1-3:1998, IEC 61290-1-3:1998. Optical fibre amplifiers. Basic spectrum analyzers.Optical power meter
BS EN 61290-1-3:2005. Optical amplifiers. Test methodsPower and gain parameters. Optical power meter method
BS EN 61290-2-1:1998, IEC 61290-2-1:1998. Optical fibre amplifiers. Basic specification.Test methods for optical power parameters. Optical spectrum analyzer
BS EN 61290-2-2:1998, IEC 61290-2-2:1998. Optical fibre amplifiers. Basic specification.Test methods for optical power parameters. Electrical spectrum analyzer
BS EN 61290-2-3:1998, IEC 61290-2-3:1998. Optical fibre amplifiers. Basic specification.Test methods for optical power parameters. Optical power meter
BS EN 61290-3:2000, IEC 61290-3:2000. Optical fibre amplifiers. Basic specification.Test methods for noise figure parameters
BS EN 61290-3:2008. Optical amplifiers. Test methodsNoise figure parameters
BS EN 61290-3-1:2003. Optical fibre amplifiers. Basic specification. Test methods for noise figure parametersOptical spectrum analyzer method
BS EN 61290-3-2:2003. Optical fibre amplifiers. Basic specification. Test methods for noise figure parametersElectrical spectrum analyzer method
BS EN 61290-3-2:2008. Optical amplifiers. Test methodsNoise figure parameters. Electrical spectrum analyzer method
BS EN 61290-4-1:2011. Optical amplifiers. Test methodsGain transient parameters. Two-wavelength method
BS EN 61290-4-2:2011. Optical amplifiers. Test methodsGain transient parameters. Broadband source method
BS EN 61290-5-1:2000, IEC 61290-5-1:2000. Optical fibre amplifiers. Basic specification. Test methods for reflectance parametersOptical spectrum analyser
BS EN 61290-5-1:2006. Optical amplifiers. Test methodsReflectance parameters. Optical spectrum analyzer method
BS EN 61290-5-2:2004. Optical fibre amplifiers. Basic specification. Test methods for reflectance parametersElectrical spectrum analyser method
BS EN 61290-5-3:2002. Optical fibre amplifiers. Basic specification. Test methods for reflectance parametersReflectance tolerance using an electrical spectrum analyser
BS EN 61290-6-1:1998, IEC 61290-6-1:1998. Optical fibre amplifiers. Basic specification.Test methods for pump leakage parameters. Optical demultiplexer
BS EN 61290-7-1:1998, IEC 61290-7-1:1998. Optical fibre amplifiers. Basic specification.Test methods for out-of-band insertion losses. Filtered optical power meter
BS EN 61290-7-1:2007. Optical amplifiers. Test methodsOut-of-band insertion losses. Filtered optical power meter method
BS EN 61291-1:1998, IEC 61291-1:1998. Optical fibre amplifiersGeneric specification
BS EN 61291-1:2006. Optical amplifiersGeneric specification
BS EN 61291-1:2012. Optical amplifiersGeneric specification
BS EN 61291-2:2001, IEC 61291-2:2000. Optical fibre amplifiersDigital applications. Performance specification template
BS EN 61291-2:2007. Optical amplifiersDigital applications. Performance specification template
BS EN 61291-2:2012. Optical amplifiersDigital applications. Performance specification template
BS EN 61291-4:2003. Optical fibre amplifiersMultichannel applications. Performance specification template
BS EN 61291-4:2008. Optical amplifiersMultichannel applications. Performance specification template
BS EN 61291-4:2012. Optical amplifiersMultichannel applications. Performance specification template
BS EN 61291-5-2:2002. Optical fibre amplifiers. Qualification specificationsReliability qualification for optical fibre amplifiers
BS EN 61291-6-1:2008. Optical amplifiersInterfaces. Command set
BS EN 61293:1995, IEC 61293:1994. Marking of electrical equipment with ratings related to electrical supply. Safety requirements
BS EN 61297:1996, IEC 61297:1995. Industrial-process control systems. Classification of adaptive controllers for the purpose of evaluation
BS EN 61298-1:1996, IEC 61298-1:1995. Process measurement and control devices. General methods and procedures for evaluating performanceGeneral considerations
BS EN 61298-1:2008. Process measurement and control devices. General methods and procedures for evaluating performanceGeneral considerations
BS EN 61298-2:1996, IEC 61298-2:1995. Process measurement and control devices. General methods and procedures for evaluating performanceTests under reference conditions
BS EN 61298-2:2008. Process measurement and control devices. General methods and procedures for evaluating performanceTests under reference conditions
BS EN 61298-3:1998, IEC 61298-3:1998. Process measurement and control devices. General methods and procedures for evaluating performanceTests for the effects of influence quantities
BS EN 61298-3:2008. Process measurement and control devices. General methods and procedures for evaluating performanceTests for the effects of influence quantities
BS EN 61298-4:1996, IEC 61298-4:1995. Process measurement and control devices. General methods and procedures for evaluating performanceEvaluation report content
BS EN 61298-4:2008. Process measurement and control devices. General methods and procedures for evaluating performanceEvaluation report content
BS EN 613:2001. Independent gas-fired convection heaters
BS EN 61300-1:1997, IEC 61300-1:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresGeneral and guidance
BS EN 61300-1:2003. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresGeneral and guidance
BS EN 61300-1:2011. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresGeneral and guidance
BS EN 61300-2-1:1997, IEC 61300-2-1:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsVibration (sinusoidal)
BS EN 61300-2-1:2003. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsTests. Vibration (sinusoidal)
BS EN 61300-2-1:2009. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Vibration (sinusoidal)
BS EN 61300-2-10:1997, IEC 61300-2-10:1997. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsCrush resistance
BS EN 61300-2-10:2012. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Crush resistance
BS EN 61300-2-11:1997, IEC 61300-2-11:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsAxial compression
BS EN 61300-2-11:2013. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Axial compression
BS EN 61300-2-12:1997, IEC 61300-2-12:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsImpact
BS EN 61300-2-12:2005. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Impact
BS EN 61300-2-12:2009. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Impact
BS EN 61300-2-13:1997, IEC 61300-2-13:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsAcceleration
BS EN 61300-2-14:1997, IEC 61300-2-14:1997. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsMaximum input power
BS EN 61300-2-14:2006. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Optical power handling and damage threshold characterization
BS EN 61300-2-14:2013. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. High optical power
BS EN 61300-2-15:1997, IEC 61300-2-15:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsTorque strength of coupling mechanisms
BS EN 61300-2-15:2008. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Torque strength of coupling mechanism
BS EN 61300-2-16:1997, IEC 61300-2-16:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsMould growth
BS EN 61300-2-16:2006. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests
BS EN 61300-2-17:1997, IEC 61300-2-17:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsTests. Cold
BS EN 61300-2-17:2003. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsCold
BS EN 61300-2-17:2011. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Cold
BS EN 61300-2-18:1997, IEC 61300-2-18:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsDry heat. High temperature endurance
BS EN 61300-2-18:2005. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Dry heat. High temperature endurance
BS EN 61300-2-19:1997, IEC 61300-2-19:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsDamp heat (steady state)
BS EN 61300-2-19:2005. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests
BS EN 61300-2-19:2013. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Damp heat (steady state)
BS EN 61300-2-2:1997, IEC 61300-2-2:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsMating durability
BS EN 61300-2-2:2003. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsMating durability
BS EN 61300-2-2:2008. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Mating durability
BS EN 61300-2-20:1997, IEC 61300-2-20:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsClimatic sequence
BS EN 61300-2-21:1997, IEC 61300-2-21:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsComposite temperature-humidity cyclic test
BS EN 61300-2-21:2010. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Composite temperature/humidity cyclic test
BS EN 61300-2-22:1997, IEC 61300-2-22:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsChange of temperature
BS EN 61300-2-22:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Change of temperature
BS EN 61300-2-23:1997, IEC 61300-2-23:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsSealing for non-pressurized closures of fibre optic devices
BS EN 61300-2-23:2011. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Sealing for non-pressurized closures of fibre optic devices
BS EN 61300-2-24:2000, IEC 61300-2-24:1999. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Screen testing of ceramic alignment split sleeve by stress application
BS EN 61300-2-24:2010. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Screen testing of ceramic alignment split sleeve by stress application
BS EN 61300-2-25:1997, IEC 61300-2-25:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsSealing endurance for closures
BS EN 61300-2-26:1997, IEC 61300-2-26:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsSalt mist
BS EN 61300-2-26:2007. Fibre optic interconnecting devices and passive Components. Basic test and measurement proceduresTests. Salt mist
BS EN 61300-2-27:1997. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsDust. Laminar flow
BS EN 61300-2-28:1997, IEC 61300-2-28:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsIndustrial atmosphere (sulphur dioxide)
BS EN 61300-2-29:1997, IEC 61300-2-29:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsTests. Low air pressure
BS EN 61300-2-3:1997, IEC 61300-2-3:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsTests. Static shear load
BS EN 61300-2-30:1997, IEC 61300-2-30:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsSolar radiation
BS EN 61300-2-31:1997, IEC 61300-2-31:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsNuclear radiation
BS EN 61300-2-32:1997, IEC 61300-2-32:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsWater vapour permeation
BS EN 61300-2-33:1997, IEC 61300-2-33:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsAssembly and disassembly of closures
BS EN 61300-2-33:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests
BS EN 61300-2-33:2012. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures
BS EN 61300-2-34:1997, IEC 61300-2-34:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsResistance to solvents and contaminating fluids
BS EN 61300-2-34:2009. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Resistance to solvents and contaminating fluids of interconnecting components and closures
BS EN 61300-2-35:1997, IEC 61300-2-35:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsCable nutation
BS EN 61300-2-36:1997, IEC 61300-2-36:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsFlammability (fire hazard)
BS EN 61300-2-37:1997, IEC 61300-2-37:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsCable bending for closures
BS EN 61300-2-37:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Cable bending for fibre optic closures
BS EN 61300-2-38:1997, IEC 61300-2-38:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsSealing for pressurized closures of fibre optic devices
BS EN 61300-2-38:2006. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests
BS EN 61300-2-39:1997, IEC 61300-2-39:1997. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsSusceptibility to external magnetic fields
BS EN 61300-2-4:1997, IEC 61300-2-4:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsFibre/cable retention
BS EN 61300-2-40:2001. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsScreen testing of attenuation of single-mode tuned angled optical connectors
BS EN 61300-2-41:1998, IEC 61300-2-41:1998. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsScreen testing of attenuation of single-mode tuned non-angled optical fibre connectors
BS EN 61300-2-42:1999, IEC 61300-2-42:1998. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsStatic side load for connectors
BS EN 61300-2-42:2005. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Static side load for connectors
BS EN 61300-2-43:2000, IEC 61300-2-43:1999. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsScreen testing of return loss of single mode PC optical fibre connectors
BS EN 61300-2-44:2005. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests
BS EN 61300-2-44:2008. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Flexing of the strain relief of fibre optic devices
BS EN 61300-2-44:2013. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Flexing of the strain relief of fibre optic devices
BS EN 61300-2-45:1999, IEC 61300-2-45:1999. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsDurability test by water immersion
BS EN 61300-2-46:2006. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Damp heat cyclic
BS EN 61300-2-47:2004. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests.
BS EN 61300-2-47:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests
BS EN 61300-2-47:2010. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Thermal shocks
BS EN 61300-2-48:2003. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsTemperature-humidity cycling
BS EN 61300-2-48:2009. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Temperature-humidity cycling
BS EN 61300-2-49:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Connector installation test
BS EN 61300-2-5:1997, IEC 61300-2-5:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsTests. Torsion/twist
BS EN 61300-2-5:2002. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsTorsion/twist
BS EN 61300-2-5:2011. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Torsion
BS EN 61300-2-50:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Fibre optic connector proof test with static load. Singlemode and multimode
BS EN 61300-2-51:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Fibre optic connector test for transmission with applied tensile load. Singlemode and multimode
BS EN 61300-2-6:1997, IEC 61300-2-6:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsTensile strength of coupling mechanism
BS EN 61300-2-6:2011. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Tensile strength of coupling mechanism
BS EN 61300-2-7:1997, IEC 61300-2-7:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsBending moment
BS EN 61300-2-7:2013. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Bending moment
BS EN 61300-2-8:1997, IEC 61300-2-8:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsBump
BS EN 61300-2-9:1997, IEC 61300-2-9:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. TestsShock
BS EN 61300-2-9:2010. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresTests. Shock
BS EN 61300-3-1:1997, IEC 61300-3-1:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsVisual examination
BS EN 61300-3-1:2005. Fire optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements
BS EN 61300-3-10:1997, IEC 61300-3-10:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsGauge retention force
BS EN 61300-3-10:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Gauge retention force
BS EN 61300-3-11:1997, IEC 61300-3-11:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsEngagement and separation forces
BS EN 61300-3-12:1997, IEC 61300-3-12:1997. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsPolarization dependence of attenuation of a single-mode fibre optic component. Matrix calculation method
BS EN 61300-3-13:1997, IEC 61300-3-13:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsControl stability of a fibre optic switch
BS EN 61300-3-14:1997, IEC 61300-3-14:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsAccuracy and repeatability of the attenuation settings of a variable attenuator
BS EN 61300-3-14:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Accuracy and repeatability of the attenuation settings of a variable attenuator
BS EN 61300-3-15:1997, IEC 61300-3-15:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsEccentricity of a convex polished ferrule endface
BS EN 61300-3-15:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Dome eccentricity of a convex polished ferrule endface
BS EN 61300-3-16:1997, IEC 61300-3-16:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsEndface radius of spherically polished ferrules
BS EN 61300-3-16:2003. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsEndface radius of spherically polished ferrules
BS EN 61300-3-17:1997, IEC 61300-3-17:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsEndface angle of angle-polished ferrules
BS EN 61300-3-17:2000, IEC 61300-3-17:1999. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements Endface angle of angle-polished ferrules
BS EN 61300-3-18:1997, IEC 61300-3-18:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsKeying accuracy of an angled endface connector
BS EN 61300-3-18:2006. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Keying accuracy of an angled endface connector
BS EN 61300-3-19:1997, IEC 61300-3-19:1997. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsPolarization dependence of return loss of a single-mode fibre optic component
BS EN 61300-3-2:1997, IEC 61300-3-2:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsPolarization dependence of a single-mode fibre optic device
BS EN 61300-3-2:1999, IEC 61300-3-2:1999. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsPolarization dependence of attenuation in a single-mode fibre optic device
BS EN 61300-3-2:2009. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Polarization dependent loss in a single-mode fibre optic device
BS EN 61300-3-20:2002, IEC 61300-3-20:2001. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsDirectivity of fibre optic branching devices
BS EN 61300-3-21:1998, IEC 61300-3-21:1998. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsExaminations and measurements. Switching time and bounce time
BS EN 61300-3-22:1997, IEC 61300-3-22:1997. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsFerrule compression force
BS EN 61300-3-22:2011. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Ferrule compression force
BS EN 61300-3-23:1998, IEC 61300-3-23:1998. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsExamination and measurements. Fibre position relative to ferrule endface
BS EN 61300-3-24:2000, IEC 61300-3-24:1999. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsKeying accuracy of optical connectors for polarization maintaining fibre
BS EN 61300-3-24:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Keying accuracy of optical connectors for polarization maintaining fibre
BS EN 61300-3-25:1997, IEC 61300-3-25:1997. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsConcentricity of the ferrules and ferrules with fibre installed
BS EN 61300-3-26:1997, IEC 61300-3-26:1997. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsMeasurement of the angular misalignment between fibre and ferrules axes
BS EN 61300-3-26:2002. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsMeasurement of the angular misalignment between fibre and ferrule axes
BS EN 61300-3-27:1997, IEC 61300-3-27:1997. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsMeasurement method for the hole location of a multiway connector plug
BS EN 61300-3-28:2002. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsTransient loss
BS EN 61300-3-28:2012. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Transient loss
BS EN 61300-3-29:2006. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements - Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components
BS EN 61300-3-3:1997, IEC 61300-3-3:1997. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsMonitoring change in attenuation and in return loss (multi paths)
BS EN 61300-3-3:2003. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsActive monitoring of changes in attenuation and return loss
BS EN 61300-3-3:2009. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Active monitoring of changes in attenuation and return loss
BS EN 61300-3-30:2003. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsPolish angle and fibre position on single ferrule multifibre connectors
BS EN 61300-3-31:2003. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsCoupled power ratio measurement for fibre optic sources
BS EN 61300-3-32:2006. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Polarization mode dispersion measurement for passive optical components
BS EN 61300-3-33:1999, IEC 61300-3-33:1999. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsExaminations and measurements. Ferrule withdrawal force
BS EN 61300-3-33:2012. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Withdrawal force from a resilient alignment sleeve using gauge pins
BS EN 61300-3-34:1998, IEC 61300-3-34:1997. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsAttenuation of random mated connectors
BS EN 61300-3-34:2002, IEC 61300-3-34:2001. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsAttenuation of random mated connectors
BS EN 61300-3-34:2009. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Attenuation of random mated connectors
BS EN 61300-3-35:2010. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Fibre optic connector endface visual and automated inspection
BS EN 61300-3-36:2000, IEC 61300-3-36:2000. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsExaminations and measurements. Measurement methods for the inside and outside diameters of fibre optic connector ferrules
BS EN 61300-3-37:2005. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Endface angle of angle- polished optical fibres
BS EN 61300-3-38:2012. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Group delay, chromatic dispersion and phase ripple
BS EN 61300-3-39:1998, IEC 61300-3-39:1997. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsPC optical connector reference plug selection
BS EN 61300-3-39:2012. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Physical contact (PC) optical connector reference plug selection for return loss measurements
BS EN 61300-3-4:1999, IEC 61300-3-4:1998. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsAttenuation
BS EN 61300-3-4:2001, IEC 61300-3-4:2001. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsAttenuation
BS EN 61300-3-4:2013. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Attenuation
BS EN 61300-3-40:1998, IEC 61300-3-40:1998. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsExtinction ratio of a polarization maintaining (pm) fibre pigtailed connector
BS EN 61300-3-42:2008. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Attenuation of single mode alignment sleeves and or adaptors with resilient alignment sleeves
BS EN 61300-3-43:2009. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Mode transfer function measurement for fibre optic sources
BS EN 61300-3-45:2011. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Attenuation of random mated multi-fibre connectors
BS EN 61300-3-46:2011. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresMeasurement. Bore diameter for guide pin in MT ferrules
BS EN 61300-3-48:2013. Fibre optic interconnect devices and passive components. Basic test and measurement proceduresExaminations and measurements. Spring compression force of the coupling sleeve for rectangular ferrule multi-fibre connectors
BS EN 61300-3-49:2013. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Guide pin retention force for rectangular ferrule multi-fibre connectors
BS EN 61300-3-5:2001, IEC 61300-3-5:2000. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsWavelength dependence of attenuation
BS EN 61300-3-50:2013. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Crosstalk for optical spatial switches
BS EN 61300-3-6:1997, IEC 61300-3-6:1997. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsReturn loss
BS EN 61300-3-6:2003. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsReturn loss
BS EN 61300-3-6:2009. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Return loss
BS EN 61300-3-7:2001, IEC 61300-3-7:2000. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsWavelength dependence of attenuation and return loss
BS EN 61300-3-7:2012. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresExaminations and measurements. Wavelength dependence of attenuation and return loss of single mode components
BS EN 61300-3-8:1997, IEC 61300-3-8:1995. Fibre optic interconnecting devices and passive components. Basic test and measurement proceduresAmbient light susceptibility
BS EN 61300-3-9:1997, IEC 61300-3-9:1997. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurementsFar-end crosstalk
BS EN 61302:1996, IEC 61302:1995. Electrical insulating materials. Method to evaluate the resistance to tracking and erosion. Rotating wheel dip test
BS EN 61303:1997, IEC 61303:1994. Medical electrical equipment. Radionuclide calibrators. Particular methods for describing performance
BS EN 61305-1:1995, IEC 61305-1:1995. Household high-fidelity audio equipment and systems. Methods of measuring and specifying the performanceGeneral
BS EN 61305-2:1998, IEC 61305-2:1997. Household high-fidelity audio equipment and systems. Methods of measuring and specifying the performanceFM radio tuners
BS EN 61305-3:1995, IEC 61305-3:1995. Household high-fidelity audio equipment and systems. Methods of measuring and specifying the performanceAmplifiers
BS EN 61305-5:2003. Household high-fidelity audio equipment and systems. Methods of measuring and specifying the performanceLoudspeakers
BS EN 61307:1997, IEC 61307:1994. Industrial microwave heating installations. Test methods for the determination of power output
BS EN 61307:2006. Industrial microwave heating installations. Test methods for the determination of power output
BS EN 61307:2011. Industrial microwave heating installations. Test methods for the determination of power output
BS EN 61308:1997, IEC 61308:1994. High-frequency dielectric heating installations. Test methods for the determination of power output
BS EN 61308:2006. High-frequency dielectric heating installations. Test methods for the determination of power output
BS EN 61309:1995, IEC 61309:1995. Deep-fat fryers for household use. Methods for measuring the performance
BS EN 61310-1:1995, IEC 61310-1:1995. Safety of machinery. Indication, marking and actuationRequirements for visual, auditory and tactile signals
BS EN 61310-1:2008. Safety of machinery. Indication, marking and actuationRequirements for visual, acoustic and tactile signals
BS EN 61310-2:1995, IEC 61310-2:1995. Safety of machinery. Indication, marking and actuationRequirements for marking
BS EN 61310-2:2008. Safety of machinery. Indication, marking and actuationRequirements for marking
BS EN 61310-3:1999, IEC 61310-3:1999. Safety of machinery. Indication, marking and actuationRequirements for the location and operation of actuators
BS EN 61310-3:2008. Safety of machinery. Indication, marking and actuationRequirements for the location and operation of actuators
BS EN 61313-1:1997, IEC 61313-1:1995. Fibre optic passive components and cable assembliesCapability approval. Generic specification
BS EN 61314-1:1997, IEC 61314-1:1995,QC 880000-1:1995. Harmonized system of quality assessment for electronic components. Fibre optic fan-outsGeneric specification
BS EN 61314-1:2005. Fibre optic fan-outsGeneric specification
BS EN 61314-1:2009. Fibre optic interconnecting devices and passive components. Fibre optic fan-outsGeneric specification
BS EN 61314-1:2012. Fibre optic interconnecting devices and passive components. Fibre optic fan-outsGeneric specification
BS EN 61314-1-1:2006. Fibre optic fan-outsBlank detail specification
BS EN 61314-1-1:2012. Fibre optic interconnecting devices and passive components. Fibre optic fan-outsBlank detail specification
BS EN 61315:1997, IEC 61315:1995. Calibration of fibre optic power meters
BS EN 61315:2006. Calibration of fibre-optic power meters
BS EN 61316:2000, IEC 61316:1999. Industrial cable reels
BS EN 61318:2008. Live working. Conformity assessment applicable to tools, devices and equipment
BS EN 61319-1:1996, IEC 61319-1:1995. Interconnections of satellite receiving equipmentEurope
BS EN 61325:1996, IEC 61325:1995. Insulators for overhead lines with a nominal voltage above 1000 V. Ceramic or glass insulator units for d.c systems. Definitions, test methods and acceptance criteria
BS EN 61326:1998, IEC 61326-1:1997. Electrical equipment for measurement, control and laboratory use. EMC requirements
BS EN 61326-1:2006. Electrical equipment for measurement, control and laboratory use. EMC requirementsGeneral requirements
BS EN 61326-1:2013. Electrical equipment for measurement, control and laboratory use. EMC requirementsGeneral requirements
BS EN 61326-2-1:2006. Electrical equipment for measurement, control and laboratory use. EMC requirementsParticular requirements. Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
BS EN 61326-2-1:2013. Electrical equipment for measurement, control and laboratory use. EMC requirementsParticular requirements. Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
BS EN 61326-2-2:2006. Electrical equipment for measurement, control and laboratory use. EMC requirementsParticular requirements. Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
BS EN 61326-2-2:2013. Electrical equipment for measurement, control and laboratory use. EMC requirementsParticular requirements. Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
BS EN 61326-2-3:2006. Electrical equipment for measurement, control and laboratory use. EMC requirementsParticular requirements
BS EN 61326-2-3:2013. Electrical equipment for measurement, control and laboratory use. EMC requirementsParticular requirements. Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
BS EN 61326-2-4:2006. Electrical equipment for measurement, control and laboratory use. EMC requirementsParticular requirements
BS EN 61326-2-4:2013. Electrical equipment for measurement, control and laboratory use. EMC requirementsParticular requirements. Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
BS EN 61326-2-5:2006. Electrical equipment for measurement, control and laboratory use. EMC requirementsParticular requirements
BS EN 61326-2-5:2013. Electrical equipment for measurement, control and laboratory use. EMC requirementsParticular requirements. Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1
BS EN 61326-2-6:2006. Electrical equipment for measurement, control and laboratory use. EMC requirementsParticular requirements. In vitro diagnostic (IVD) medical equipment
BS EN 61326-2-6:2013. Electrical equipment for measurement, control and laboratory use. EMC requirementsParticular requirements. In vitro diagnostic (IVD) medical equipment
BS EN 61326-3-1:2008. Electrical equipment for measurement, control and laboratory use. EMC requirementsImmunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety). General industrial applications
BS EN 61326-3-2:2008. Electrical equipment for measurement, control and laboratory use. EMC requirementsImmunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety). Industrial applications with specified electromagnetic environment
BS EN 61327:1996, IEC 61327:1995. Helical-scan digital composite video cassette recording system using 12,65 mm (0,5 in) magnetic tape. Format D-3
BS EN 61329:1996, IEC 61329:1995. Sound system equipment. Methods for measuring and specifying the performance of sounders (electroacoustic transducers for tone production)
BS EN 61330:1996, IEC 61330:1995. High-voltage/low-voltage prefabricated substations
BS EN 61331-1:2002. Protective devices against diagnostic medical X-radiationDetermination of attenuation properties of materials
BS EN 61331-2:2002. Protective devices against diagnostic medical X-radiationProtective glass plates
BS EN 61331-3:1999, BS 7817-3:1999,IEC 61331-3:1998. Protective devices against diagnostic medical X-radiationProtective clothing and protective devices for gonads
BS EN 61332:1997, IEC 61332:1995. Soft ferrite material classification
BS EN 61332:2005. Soft ferrite material classification
BS EN 61333:1998, IEC 61333:1996. Marking on U and E ferrite cores
BS EN 61334-3-21:1997, IEC 61334-3-21:1996. Distribution automation using distriubution line carrier systems. Mains signalling requirementsMV phase-to-phase isolated capacitive coupling device
BS EN 61334-3-22:2001, IEC 61334-3-22:2001. Distribution automation using distriubution line carrier systems. Mains signalling requirementsMV phase to earth and screen to earth coupling devices
BS EN 61334-4-1:1997, IEC 61334-4-1:1996. Distribution automation using distribution line carrier systems. Data communication protocolsReference model of the communication system
BS EN 61334-4-32:1997, IEC 61334-4-32:1996. Distribution automation using distribution line carrier systems. Data communication protocolsData link layer. Logical link control (LLC)
BS EN 61334-4-33:1998, IEC 61334-4-33:1998. Distribution automation using distribution line carrier systems. Data communication protocolsData link layer. Connection oriented protocol
BS EN 61334-4-41:1998, IEC 61334-4-41:1996. Distribution automation using distribution line carrier systems. Data communication protocolsApplication protocols. Distribution line message specification
BS EN 61334-4-42:1997, IEC 61334-4-42:1996. Distribution automation using distribution line carrier systems. Data communication protocolsApplication protocols. Application layer
BS EN 61334-4-511:2001, IEC 61334-4-511:2000. Distribution automation using distribution line carrier systems. Data communication protocolsSystems management. CIASE protocol
BS EN 61334-4-512:2002, IEC 61334-4-512:2001. Distribution automation using distribution line carrier systems. Data communication protocolsSystem management using profile 61334-5-1. Management Information Base (MIB)
BS EN 61334-4-61:1998, IEC 61334-4-61:1998. Distribution automation using distribution line carrier systems. Data communication protocolsNetwork layer. Connectionless protocol
BS EN 61334-5-1:2001, IEC 61334-5-1:2001. Distribution automation using distribution line carrier systems. Lower layer profilesThe spread frequency shift keying (S-FSK) profile
BS EN 61334-6:2001, IEC 61334-6:2000. Distribution automation using distribution line carrier systemsA-XDR encoding rule
BS EN 61337-1:2004. Filters using waveguide type dielectric resonatorsGeneric specification
BS EN 61337-1-1:1998, IEC 61337-1-1:1995. Filters using waveguide type dielectric resonators. General information, standard values and test conditionsGeneral information and standard values
BS EN 61337-2:2004. Filters using waveguide type dielectric resonatorsGuide for use
BS EN 61338-1:2005. Waveguide type dielectric resonatorsGeneric specification
BS EN 61338-1-3:2000, IEC 61338-1-3:1999. Waveguide type dielectric resonators.General information and test conditions. Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency
BS EN 61338-1-4:2006. Waveguide type dielectric resonatorsGeneral information and test conditions. Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency
BS EN 61338-2:2004. Waveguide type dielectric resonatorsGuidelines for oscillator and filter applications
BS EN 61338-4:2005. Waveguide type dielectric resonatorsSectional specification
BS EN 61338-4-1:2005. Waveguide type dielectric resonatorsBlank detail specification
BS EN 61340-2-1:2002. Electrostatics. Measurement methodsAbility of materials and products to dissipate static electric charge
BS EN 61340-2-3:2000, IEC 61340-2-3:2000. Electrostatics.Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation
BS EN 61340-3-1:2002, IEC 61340-3-1:2002. Electrostatics. Methods for simulation of electrostatic effectsHuman body model (HBM). Component testing
BS EN 61340-3-1:2007. ElectrostaticsMethods for simulation of electrostatic effects. Human body model (HBM) electrostatic discharge test waveforms
BS EN 61340-3-2:2002. Electrostatics. Methods for simulation of electrostatic effectsMachine model (MM). Component testing
BS EN 61340-3-2:2007. ElectrostaticsMethods for simulation of electrostatic effects. Machine model (MM) electrostatic discharge test waveforms
BS EN 61340-4-3:2002, IEC 61340-4-3:2001. Electrostatics. Standard test methods for specific applicationsFootwear
BS EN 61340-4-4:2005. ElectrostaticsStandard test methods for specific applications
BS EN 61340-4-4:2012. ElectrostaticsStandard test methods for specific applications. Electrostatic classification of flexible intermediate bulk containers (FIBC)
BS EN 61340-4-5:2004. ElectrostaticsStandard test methods for specific applications. Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person
BS EN 61340-5-1:2001. Electrostatics. Protection of electronic devices from electrostatic phenomenaGeneral requirements
BS EN 61340-5-1:2007. ElectrostaticsProtection of electronic devices from electrostatic phenomena. General requirements
BS EN 61340-5-2:2001. Electrostatics. Protection of electronic devices from electrostatic phenomenaUser guide
BS EN 61340-5-3:2010. ElectrostaticsProtection of electronic devices from electrostatic phenomena. Properties and requirements classifications for packaging intended for electrostatic discharge sensitive devices
BS EN 61341:2011. Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
BS EN 61345:1998, IEC 61345:1998. UV test for photovoltaic (PV) modules
BS EN 61346-1:1996, IEC 61346-1:1996. Industrial systems, installations and equipment and industrial products. Structuring principles and reference designationsBasic rules
BS EN 61346-2:2001, IEC 61346-2:2000. Industrial systems, installations and equipment and industrial products. Structuring principles and reference designationsClassification of objects and codes for classes
BS EN 61347-1:2001+A1:2008, IEC 61347-1:2000. Lamp controlgear.General and safety requirements
BS EN 61347-1:2008+A2:2013. Lamp controlgearGeneral and safety requirements
BS EN 61347-2-1:2001+A1:2006. Lamp controlgearParticular requirements for starting devices (other than glow starters)
BS EN 61347-2-10:2001+A1:2009. Lamp controlgearParticular requirements for electronic invertors and convertors for high-frequency operation of cold tubular discharge lamps (neon tubes)
BS EN 61347-2-11:2002, IEC 61347-2-11:2001. Lamp controlgearParticular requirements for miscellaneous electronic circuits used with luminaires
BS EN 61347-2-12:2005+A1:2010. Lamp controlgearParticular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
BS EN 61347-2-13:2006. Lamp controlgearParticular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
BS EN 61347-2-2:2001+A2:2006, IEC 61347-2-2:2000. Lamp controlgearParticular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
BS EN 61347-2-2:2012. Lamp controlgearParticular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
BS EN 61347-2-3:2001+A2:2006, IEC 61347-2-3:2000. Lamp controlgearParticular requirements for a.c. supplied electronic ballasts for fluorescent lamps
BS EN 61347-2-3:2011. Lamp control gearParticular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
BS EN 61347-2-4:2001, IEC 61347-2-4:2000. Lamp controlgearParticular requirements for d.c. supplied electronic ballasts for general lighting
BS EN 61347-2-5:2001, IEC 61347-2-5:2000. Lamp controlgearParticular requirements for d.c. supplied electronic ballasts for public transport lighting
BS EN 61347-2-6:2001, IEC 61347-2-6:2000. Lamp controlgearParticular requirements for d.c. supplied electronic ballasts for aircraft lighting
BS EN 61347-2-7:2001, IEC 61347-2-7:2000. Lamp controlgear.Particular requirements for d.c. supplied electronic ballasts for emergency lighting
BS EN 61347-2-7:2006. Lamp controlgearParticular requirements for d.c. supplied electronic ballasts for emergency lighting
BS EN 61347-2-7:2012. Lamp controlgearParticular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)
BS EN 61347-2-8:2001+A1:2006. Lamp controlgear Particular requirements for ballasts for fluorescent lamps
BS EN 61347-2-9:2001+A2:2006, IEC 61347-2-9:2000. Lamp controlgearParticular requirements for ballasts for discharge lamps (excluding fluorescent lamps)
BS EN 61347-2-9:2013. Lamp controlgearParticular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)
BS EN 61355:1997, IEC 61355:1997. Classification and designation of documents for plants, systems and equipment
BS EN 61355-1:2008. Classification and designation of documents for plants, systems and equipmentRules and classification tables
BS EN 61358:1996, IEC 61358:1996. Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2)
BS EN 61360-1:1996, IEC 61360-1:1995. Standard data element types with associated classification scheme for electric componentsDefinitions. Principles and methods
BS EN 61360-1:2002, IEC 61360-1:2002. Standard data element types with associated classification scheme for electric componentsDefinitions. Principles and methods
BS EN 61360-1:2010. Standard data elements types with associated classification scheme for electric itemsDefinitions. Principles and methods
BS EN 61360-2:1998, IEC 61360-2:1998. Standard data element types with associated classification scheme for electric componentsEXPRESS dictionary schema
BS EN 61360-2:2002, IEC 61360-2:2002. Standard data element types with associated classification scheme for electric componentsEXPRESS dictionary schema
BS EN 61360-2:2013. Standard data element types with associated classification scheme for electric componentsEXPRESS dictionary schema
BS EN 61360-4:1997, IEC 61360-4:1997. Standard data element types with associated classification scheme for electric componentsData element type definitions
BS EN 61360-4:2005. Standard data element types with associated classification scheme for electric componentsIEC reference collection of standard data element types and component classes
BS EN 61360-5:2004. Standard data element types with associated classification scheme for electric componentsExtensions to the EXPRESS dictionary schema
BS EN 61362:1998. Guide to specification of hydroturbine control systems
BS EN 61362:2012. Guide to specification of hydraulic turbine governing systems
BS EN 61373:1999, IEC 61373:1999. Railway applications. Rolling stock equipment. Shock and vibration tests
BS EN 61373:2010. Railway applications. Rolling stock equipment. Shock and vibration tests
BS EN 61375-1:2012. Electronic railway equipment. Train communication network (TCN)General architecture
BS EN 61375-2-1:2012. Electronic railway equipment. Train communication network (TCN)Wire Train Bus (WTB)
BS EN 61375-2-2:2012. Electronic railway equipment. Train communication network (TCN)Wire Train Bus conformance testing
BS EN 61375-3-1:2012. Electronic railway equipment. Train communication network (TCN)Multifunction Vehicle Bus (MVB)
BS EN 61375-3-2:2012. Electronic railway equipment. Train communication network (TCN)MVB (Multifunction Vehicle Bus) conformance testing
BS EN 61375-3-3:2012. Electronic railway equipment. Train communication network (TCN)CANopen Consist Network (CCN)
BS EN 61377:1997, IEC 61377:1996. Electric traction. Rolling stock. Combined testing of inverter-fed alternating current motors and their control
BS EN 61377-1:2006. Railway applications. Rolling stockCombined testing of inverter-fed alternating current motors and their control system
BS EN 61377-2:2002. Railway applications. Rolling stockCombined testing. Chopper-fed direct current traction motors and their control
BS EN 61377-3:2002. Railway applications. Rolling stockCombined testing of alternating current motors, fed by an indirect convertor, and their control system
BS EN 61378-1:1999. Convertor transformersTransformers for industrial applications
BS EN 61378-1:2011. Convertor transformersTransformers for industrial applications
BS EN 61378-2:2001, IEC 61378-2:2001. Convertor transformersTransformers for HVDC applications
BS EN 61386-1:2004. Conduit systems for cable managementGeneral requirements
BS EN 61386-1:2008. Conduit systems for cable managementGeneral requirements
BS EN 61386-24:2010. Conduit systems for cable managementParticular requirements. Conduit systems buried underground
BS EN 61386-25:2011. Conduit systems for cable managementParticular requirements. Conduit fixing devices
BS EN 61391-1:2006. Ultrasonics. Pulse-echo scannersTechniques for calibrating spatial measurement systems and measurement of system point-spread function response
BS EN 61391-2:2010. Ultrasonics. Pulse-echo scannersMeasurement of maximum depth of penetration and local dynamic range
BS EN 61394:2011. Overhead lines. Requirements for greases for aluminium, aluminium alloy and steel bare conductors
BS EN 61395:1998, IEC 61395:1998. Overhead electrical conductors. Creep test procedures for stranded conductors
BS EN 61400-1:2004. Wind turbine generator systemsSafety requirements
BS EN 61400-1:2005+A1:2010. Wind turbinesDesign requirements
BS EN 61400-11:1999, IEC 61400-11:1998. Wind turbine generator systemsAcoustic noise measurement techniques
BS EN 61400-11:2003. Wind turbine generator systemsAcoustic noise measurement techniques
BS EN 61400-11:2013. Wind turbinesAcoustic noise measurement techniques
BS EN 61400-12:1998, IEC 61400-12:1998. Wind turbine generator systemsWind turbine power performance testing
BS EN 61400-12-1:2006. Wind turbinesPower performance measurements of electricity producing wind turbines
BS EN 61400-12-2:2013. Wind turbinesPower performance of electricity-producing wind turbines based on nacelle anemometry
BS EN 61400-2:1996, IEC 61400-2:1996. Wind turbine generator systemsSafety of small wind turbines
BS EN 61400-2:2006. Wind turbinesDesign requirements for small wind turbines
BS EN 61400-21:2002. Wind turbine generator systemsMeasurement and assessment of power quality characteristics of grid connected wind turbines
BS EN 61400-21:2008. Wind turbinesMeasurement and assessment of power quality characteristics of grid connected wind turbines
BS EN 61400-22:2011. Wind turbinesConformity testing and certification
BS EN 61400-24:2010. Wind turbinesLightning protection
BS EN 61400-25-1:2007. Wind turbinesCommunications for monitoring and control of wind power plants. Overall description of principles and models
BS EN 61400-25-2:2007. Wind turbinesCommunications for monitoring and control of wind power plants. Information models
BS EN 61400-25-3:2007. Wind turbinesCommunications for monitoring and control of wind power plants. Information exchange models
BS EN 61400-25-4:2008. Wind turbinesCommunications for monitoring and control of wind power plants. Mapping to communication profile
BS EN 61400-25-5:2007. Wind turbinesCommunications for monitoring and control of wind power plants. Conformance testing
BS EN 61400-25-6:2011. Wind turbinesCommunications for monitoring and control of wind power plants. Logical node classes and data classes for condition monitoring
BS EN 61400-3:2009. Wind turbinesDesign requirements for offshore wind turbines
BS EN 61400-4:2013. Wind turbinesDesign requirements for wind turbine gea
BS EN 614-1:1995. Safety of machinery. Ergonomic design principlesTerminology and general principles
BS EN 614-1:2006+A1:2009. Safety of machinery. Ergonomic design principlesTerminology and general principles
BS EN 614-2:2000+A1:2008. Safety of machinery. Ergonomic design principlesInteractions between the design of machinery and work tasks
BS EN 61427:2002. Secondary cells and batteries for solar photovoltaic energy systems. General requirements and methods of test
BS EN 61427:2005. Secondary cells and batteries for photovoltaic energy systems (PVES). General requirements and methods of test
BS EN 61429:1997, IEC 61429:1995. Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 and indications regarding directives 93/86/EEC and 91/157/EEC
BS EN 61434:1997, IEC 61434:1996. Secondary cells and batteries containing alkaline or non-acidic electrolytes. Guide to the designation of current in alkaline secondary cell and battery standards
BS EN 61436:1998, IEC 61436:1998. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-metal hydride rechargeable single cells
BS EN 61439-1:2009. Low-voltage switchgear and controlgear assembliesGeneral rules
BS EN 61439-1:2011. Low-voltage switchgear and controlgear assembliesGeneral rules
BS EN 61439-2:2009. Low-voltage switchgear and controlgear assembliesPower switchgear and controlgear assemblies
BS EN 61439-2:2011. Low-voltage switchgear and controlgear assembliesPower switchgear and controlgear assemblies
BS EN 61439-3:2012. Low-voltage switchgear and controlgear assembliesDistribution boards intended to be operated by ordinary persons (DBO)
BS EN 61439-4:2013. Low-voltage switchgear and controlgear assembliesParticular requirements for assemblies for construction sites (ACS)
BS EN 61439-5:2011. Low-voltage switchgear and controlgear assembliesAssemblies for power distribution in public networks
BS EN 61439-6:2012. Low-voltage switchgear and controlgear assembliesBusbar trunking systems (busways)
BS EN 61440:1998, IEC 61440:1997. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-cadmium small prismatic rechargeable single cells
BS EN 61442:2005. Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)
BS EN 61462:2007. Composite hollow insulators. Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1000 V. Definitions, test methods, acceptance criteria and design recommendations
BS EN 61466-1:1997, IEC 61466-1:1997. Composite string insulator units for overhead lines with a nominal voltage greater than 1000 VStandard strength classes and end fittings
BS EN 61466-2:1999, IEC 61466-2:1998. Composite string insulator units for overhead lines with a nominal voltage greater than 1000 VDimensional and electrical characteristics
BS EN 61467:2008. Insulators for overhead lines. Insulator strings and sets for lines with a nominal voltage greater than 1000 V. AC power arc tests
BS EN 61472:2004. Live working. Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV. A method of calculation
BS EN 61472:2013. Live working. Minimum approach distances for a.c systems in the voltage range 72,5 kV to 800 kV. A method of calculation
BS EN 61477:2002. Live working. Minimum requirements for the utilization of tools, devices and equipment
BS EN 61477:2009. Live working. Minimum requirements for the utilization of tools, devices and equipment
BS EN 61478:2001, IEC 61478:2001. Live working. Ladders of insulating material
BS EN 61479:2001, IEC 61479:2001. Live working. Flexible conductor covers (line hoses) of insulating material
BS EN 61481:2001, IEC 61481:2001. Live working. Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.
BS EN 61482-1-1:2009. Live working. Protective clothing against the thermal hazards of an electric arcTest methods. Method 1. Determination of the arc rating (ATPV or EBT50) of flame resistant materials for clothing
BS EN 61482-1-2:2007. Live working. Protective clothing against the thermal hazards of an electric arcTest methods
BS EN 61491:1999. Electrical equipment of industrial machines. Serial data link for real-time communication between controls and drives
BS EN 61496-1:1998, IEC 61496-1:1997. Safety of machinery. Electro-sensitive protective equipment.General requirements and tests
BS EN 61496-1:2004+A1:2008. Safety of machinery. Electro-sensitive protective equipmentGeneral requirements and tests
BS EN 61496-3:2001, IEC 61496-3:2001. Safety of machinery. Electro-sensitive protective equipment.Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR)
BS EN 61499-1:2005. Function blocksArchitecture
BS EN 61499-1:2013. Function blocksArchitecture
BS EN 61499-2:2005. Function blocksSoftware tools requirements
BS EN 61499-2:2013. Function blocksSoftware tool requirements
BS EN 61499-4:2006. Function blocksRules for compliance profiles
BS EN 61499-4:2013. Function blocksRules for compliance profiles
BS EN 615:1995. Fire protection. Fire extinguishing media. Specifications for powders (other than class D powders)
BS EN 615:2009. Fire protection. Fire extinguishing media. Specifications for powders (other than class D powders)
BS EN 61500:2011. Nuclear power plants. Instrumentation and control important to safety. Data communication in systems performing category A functions
BS EN 61508-1:2002. Functional safety of electrical/ electronic/ programmable electronic safety-related systemsGeneral requirements
BS EN 61508-1:2010. Functional safety of electrical/electronic/ programmable electronic safety-related systemsGeneral requirements
BS EN 61508-2:2002. Functional safety of electrical/ electronic/ programmable electronic safety-related systemsRequirements for electrical/ electronic/ programmable electronic safety-related systems
BS EN 61508-2:2010. Functional safety of electrical/electronic/ programmable electronic safety-related systemsRequirements for electrical/electronic/ programmable electronic safety-related systems
BS EN 61508-3:2002. Functional safety of electrical/ electronic/ programmable electronic safety-related systemsSoftware requirements
BS EN 61508-3:2010. Functional safety of electrical/electronic/ programmable electronic safety-related systemsSoftware requirements
BS EN 61508-4:2002. Functional safety of electrical/ electronic/ programmable electronic safety-related systemsDefinitions and abbreviations
BS EN 61508-4:2010. Functional safety of electrical/electronic/ programmable electronic safety related systemsDefinitions and abbreviations
BS EN 61508-5:2002. Functional safety of electrical/ electronic/ programmable electronic safety-related systemsExamples of methods for the determination of safety integrity levels
BS EN 61508-5:2010. Functional safety of electrical/electronic/ programmable electronic safety related systemsExamples of methods for the determination of safety integrity levels
BS EN 61508-6:2002. Functional safety of electrical/ electronic/ programmable electronic safety-related systemsGuidelines on the application of IEC 61508-2 and IEC 61508-3
BS EN 61508-6:2010. Functional safety of electrical/electronic/ programmable electronic safety related systemsGuidelines on the application of IEC 61508-2 and IEC 61508-3
BS EN 61508-7:2002. Functional safety of electrical/ electronic/ programmable electronic safety-related systemsOverview of techniques and measures
BS EN 61508-7:2010. Functional safety of electrical/electronic/ programmable electronic safety related systemsOverview of techniques and measures
BS EN 61511-1:2004. Functional safety. Safety instrumented systems for the process industry sectorFramework, definitions, system, hardware and software requirements
BS EN 61511-2:2004. Functional safety. Safety instrumented systems for the process industry sectorGuidelines for the application of IEC 61511-1
BS EN 61511-3:2004. Functional safety. Safety instrumented systems for the processGuidance for the determination of the required safety integrity levels
BS EN 61512-1:1999, IEC 61512-1:1997. Batch controlModels and terminology
BS EN 61512-2:2002. Batch controlData structures and guidelines for languages
BS EN 61512-3:2008. Batch controlGeneral and site recipe models and representation
BS EN 61512-4:2010. Batch controlBatch production records
BS EN 61513:2013. Nuclear power plants. Instrumentation and control important to safety. General requirements for systems
BS EN 61514:2002. Industrial-process control systems. Methods of evaluating the performance of valve positioners with pneumatic outputs
BS EN 61514-2:2013. Industrial process control systemsMethods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly
BS EN 61515:1996, IEC 61515:1995. Mineral insulated thermocouple cables and thermocouples
BS EN 61518:2001, IEC 61518:2001. Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa)
BS EN 61523-1:2002, IEC 61523-1:2001. Delay and power calculation standardsIntegrated circuit delay and power calculation systems
BS EN 61523-2:2002. Delay and power calculation standardsPre-layout delay calculation specification for CMOS ASIC libraries
BS EN 61526:2007. Radiation protection instrumentation. Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations. Direct reading personal dose equivalent meters and monitors
BS EN 61526:2013. Radiation protection instrumentation. Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations. Direct reading personal dose equivalent meters
BS EN 61534-1:2003. Powertrack systemsGeneral requirements
BS EN 61534-1:2011. Powertrack systemsGeneral requirements
BS EN 61534-21:2006. Powertrack systemsParticular requirements for powertrack systems intended for wall and ceiling mounting
BS EN 61534-22:2009. Powertrack systemsParticular requirements for powertrack systems intended for on floor or under floor installation
BS EN 61535:2009+A1:2013. Installation couplers intended for permanent connection in fixed installations
BS EN 61537:2002, IEC 61537:2001. Cable tray systems and cable ladder systems for cable management
BS EN 61537:2007. Cable management. Cable tray systems and cable ladder systems
BS EN 61543:1996. Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
BS EN 61547:1996, IEC 61547:1995. Specification for equipment for general lighting purposes. EMC immunity requirements
BS EN 61547:2009. Equipment for general lighting purposes. EMC immunity requirements
BS EN 61549:1996, IEC 61549:1996. Specification for miscellaneous lamps
BS EN 61549:2003+A3:2012. Miscellaneous lamps
BS EN 61557-1:1997, IEC 61557-1:1997. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures.General requirements
BS EN 61557-1:2007. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measuresGeneral requirements
BS EN 61557-10:2001, IEC 61557-10:2000. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures.Combined measuring equipment for testing, measuring or monitoring of protective measures
BS EN 61557-10:2013. Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measuresCombined measuring equipment for testing, measuring or monitoring of protective measures
BS EN 61557-11:2009. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c.. Equipment for testing, measuring or monitoring of protective measuresEffectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems
BS EN 61557-12:2008. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measuresPerformance measuring and monitoring devices (PMD)
BS EN 61557-13:2011. Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measuresHand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems
BS EN 61557-14:2013. Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measuresEquipment for testing the safety of electrical equipment of machinery
BS EN 61557-2:1997, IEC 61557-2:1997. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures.Insulation resistance
BS EN 61557-2:2007. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measuresInsulation resistance
BS EN 61557-3:1997, IEC 61557-3:1997. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures.Loop impedance
BS EN 61557-3:2007. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measuresLoop impedance
BS EN 61557-4:1997, IEC 61557-4:1997. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures.Resistance of earth connection and equipotential bonding
BS EN 61557-4:2007. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measuresResistance of earth connection and equipotential bonding
BS EN 61557-5:1997, IEC 61557-5:1997. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures.Resistance to earth
BS EN 61557-5:2007. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measuresResistance to earth
BS EN 61557-6:1998, IEC 61557-6:1997. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures.Residual current devices (RCD) in TT, TN and IT systems
BS EN 61557-6:2007. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c.. Equipment for testing, measuring or monitoring of protective measuresEffectiveness of residual current devices (RCD) in TT, TN and IT systems
BS EN 61557-7:1997, IEC 61557-7:1997. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures.Phase sequence
BS EN 61557-7:2007. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measuresPhase sequence
BS EN 61557-8:1997, IEC 61557-8:1997. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures.Insulation monitoring devices for IT systems
BS EN 61557-8:2007. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measuresInsulation monitoring devices for IT systems
BS EN 61557-9:2000, IEC 61557-9:1999. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures.Equipment for insulation fault location in IT systems
BS EN 61557-9:2009. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c.. Equipment for testing, measuring or monitoring of protective measuresEquipment for insulation fault location in IT systems
BS EN 61558-1:1998. Safety of power transformers, power supply units and similarGeneral requirements and tests
BS EN 61558-1:2005+A1:2009. Safety of power transformers, power supplies, reactors and similar productsGeneral requirements and tests
BS EN 61558-2-1:1998, IEC 61558-2-1:1997. Safety of power transformers, power supply units and similar.Particular requirements for separating transformers for general use
BS EN 61558-2-1:2007. Safety of power transformers, power supplies, reactors and similar productsParticular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
BS EN 61558-2-12:2001. Safety of power transformers, power supply units and similar.Particular requirements for constant voltage transformers
BS EN 61558-2-12:2011. Safety of transformers, reactors, power supply units and combinations thereofParticular requirements and tests for constant voltage transformers and power supply units for constant voltage
BS EN 61558-2-13:2000, IEC 61558-2-13:1999. Safety of power transformers, power supply units and similarParticular requirements for auto-transformers for general use
BS EN 61558-2-13:2009. Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 VParticular requirements and tests for auto transformers and power supply units incorporating auto transformers
BS EN 61558-2-14:2013. Safety of transformers, reactors, power supply units and combination thereofParticular requirements and tests for variable transformers and power supply units incorporating variable transformers
BS EN 61558-2-15:2001. Safety of power transformers, power supply units and similarParticular requirements for isolating transformers for the supply of medical locations
BS EN 61558-2-15:2012. Safety of transformers, reactors, power supply units and combinations thereofParticular requirements and tests for isolating transformers for the supply of medical locations
BS EN 61558-2-16:2009. Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 VParticular requirements and tests for switch mode power supply units and transformers for switch mode power supply units
BS EN 61558-2-17:1998, IEC 61558-2-17:1997. Safety of power transformers, power supply units and similar.Particular requirements for transformers for switch mode power supplies
BS EN 61558-2-19:2001, IEC EN 61558-2-19:2000. Safety of power transformers, power supply units and similar.Particular requirements for perturbation attenuation transformers
BS EN 61558-2-2:1998, IEC 61558-2-2:1997. Safety of power transformers, power supply units and similar.Particular requirements for control transformers
BS EN 61558-2-2:2007. Safety of power transformers, power supplies, reactors and similar productsParticular requirements and tests for control transformers and power supplies incorporating control transformers
BS EN 61558-2-20:2001, IEC 61558-2-20:2000. Safety of power transformers, power supply units and similar.Particular requirements for small reactors
BS EN 61558-2-20:2011. Safety of transformers, reactors, power supply units and combinations thereofParticular requirements and tests for small reactors
BS EN 61558-2-23:2001, IEC 61558-2-23:2000. Safety of power transformers, power supply units and similar.Particular requirements for transformers for construction sites
BS EN 61558-2-23:2010. Safety of transformers, reactors, power supply units and combinations thereofParticular requirements and tests for transformers and power supply units for construction sites
BS EN 61558-2-26:2013. Safety of transformers, reactors, power supply units and combinations thereofParticular requirements and tests for transformers and power supply units for saving energy and other purposes
BS EN 61558-2-3:2000, IEC 61558-2-3:1999. Safety of power transformers, power supply units and similarParticular requirements for ignition transformers for gas and oil burners
BS EN 61558-2-3:2010. Safety of transformers, reactors, power supply units and combinations thereofParticular requirements and tests for ignition transformers for gas and oil burners
BS EN 61558-2-4:1998, IEC 61558-2-4:1997. Safety of power transformers, power supply units and similar.Particular requirements for isolating transformers for general use
BS EN 61558-2-4:2009. Safety of transformers, reactors,power supply units and similar products for supply voltages up to 1100 VParticular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
BS EN 61558-2-5:1998, IEC 61558-2-5:1997. Safety of power transformers, power supply units and similarParticular requirements for shaver transformers and shaver supply units
BS EN 61558-2-5:2010. Safety of transformers, reactors, power supply units and combinations thereofParticular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units
BS EN 61558-2-6:1998, IEC 61558-2-6:1997. Safety of power transformers, power supply units and similar.Particular requirements for safety isolating transformers for general use
BS EN 61558-2-6:2009. Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 VParticular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
BS EN 61558-2-7:1998. Safety of power transformers, power supply units and similarParticular requirements for transformers for toys
BS EN 61558-2-7:2007. Safety of power transformers, power supplies, reactors and similar productsParticular requirements and tests for transformers and power supplies for toys
BS EN 61558-2-8:1999, IEC 61558-2-8:1998. Safety of power transformers, power supply units and similar.Particular requirements for bell and chime transformers
BS EN 61558-2-8:2010. Safety of transformers, reactors, power supply units and combinations thereofParticular requirements and tests for transformers and power supply units for bells and chimes
BS EN 61558-2-9:2003. Safety of power transformers, power supply units and similar productsParticular requirements for transformers for class III handlamps for tungsten filament lamps
BS EN 61558-2-9:2011. Safety of transformers, reactors, power supply units and combinations thereofParticular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps
BS EN 61566:1998, IEC 61566:1997. Measurement of exposure to radio-frequency electromagnetic fields. Field strength in the frequency range 100 kHz to 1 GHz
BS EN 61580-1:1997, IEC 61580-1:1996. Methods of measurement for waveguidesDecoupling and rotation of the plane of polarization
BS EN 61580-2:1997, IEC 61580-2:1996. Methods of measurement for waveguidesLevel of intermodulation products
BS EN 61580-3:1997, IEC 61580-3:1997. Methods of measurement for waveguidesVariation of group delay
BS EN 61580-4:1998, IEC 61580-4:1997. Methods of measurement for waveguidesAttenuation of waveguide and waveguide assemblies
BS EN 61580-6:1997, IEC 61580:1995. Methods of measurement for waveguidesReturn loss on waveguide and waveguide assemblies
BS EN 61580-7:1997, IEC 61580-7:1996. Methods of measurement for waveguidesGraphical method for the determination of waveguide performance
BS EN 61580-8:1997, IEC 61580-8:1996. Methods of measurement for waveguidesWaveguide power holding capability
BS EN 61580-9:1997, IEC 61580-9:1996. Methods of measurement for waveguidesReflection coefficient at rectangular waveguide interfaces
BS EN 61582:2006. Radiation protection instrumentation. In vivo counters. Classification, general requirements and test procedures for portable, transportable and installed equipment
BS EN 61587-1:2000, IEC 61587-1:1999. Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis
BS EN 61587-1:2007. Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis
BS EN 61587-1:2012. Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 seriesEnvironmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor conditions
BS EN 61587-2:2001, IEC 61587-2:2000. Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297Seismic tests for cabinets and racks
BS EN 61587-2:2011. Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297Seismic tests for cabinets and racks
BS EN 61587-3:2006. Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297Electromagnetic shielding performance tests for cabinets, racks and sub-racks
BS EN 61587-3:2013. Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297Electromagnetic shielding performance tests for cabinets and subracks
BS EN 61587-4:2012. Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 seriesCombination of performance levels for modular cabinets
BS EN 61591:1997+A2:2011, IEC 61591:1997. Household range hoods and other cooking fume extractors. Methods for measuring performance
BS EN 61595-1:1997, IEC 61595-1:1997. Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional useFormat A
BS EN 61595-2:1998, IEC 61595-2:1997. Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional useFormat B
BS EN 61595-3:2000, IEC 61595-3:1999. Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use24-bit operation for 16-bit media
BS EN 61596:1997, IEC 61596:1995. Magnetic oxide EP-cores and associated parts for use in inductors and transformers. Dimensions
BS EN 61599:2000, IEC 61599:1999. Videodisk players. Methods of measurement
BS EN 61603-1:1997, IEC 61603-1:1997. Transmission of audio and/or video and related signals using infra-red radiationGeneral
BS EN 61603-2:1997, IEC 61603-2:1997. Transmission of audio and/or video and related signals using infra-red radiationTransmission systems for audio wide band and related signals
BS EN 61603-3:1998, IEC 61603-3:1997. Transmission of audio and/or video and related signals using infra-red radiationTransmission systems for audio signals for conference and similar systems
BS EN 61603-6:2002. Transmission of audio and/or video and related signals using infra-red radiationVideo and audio-visual signals
BS EN 61603-7:2003. Transmission systems for audio and/or video and related signals using infra-red radiationDigital audio signals for conference and similar applications
BS EN 61603-8-1:2004. Transmission of audio and/or video and related signals using infrared radiation .Digital audio and related signals
BS EN 61605:1997, IEC 61605:1996. Fixed inductors for use in electronic and telecommunication equipment. Marking codes
BS EN 61605:2005. Fixed inductors for use in electronic and telecommunication equipment. Marking codes
BS EN 61606:1997, IEC 61606:1997. Audio and audiovisual equipment. Digital audio parts. Basic methods of measurement of audio characteristics
BS EN 61606-1:2004. Audio and audiovisual equipment. Digital audio parts. Basic measurement methods of audio characteristicsGeneral
BS EN 61606-1:2009. Audio and audiovisual equipment. Digital audio parts. Basic measurement methods of audio characteristicsGeneral
BS EN 61606-2:2004. Audio and audiovisual equipment. Digital audio parts. Basic measurement methods of audio characteristicsConsumer use
BS EN 61606-2:2009. Audio and audiovisual equipment. Digital audio parts. Basic measurement methods of audio characteristicsConsumer use
BS EN 61606-3:2008. Audio and audiovisual equipment. Digital audio parts. Basic measurement methods of audio characteristicsProfessional use
BS EN 61606-4:2006. Audio and audiovisual equipment. Digital audio parts. Basic measurement methods of audio characteristicsPersonal computer
BS EN 61609:1999, IEC 61609:1996. Microwave ferrite components. Guide for the drafting of specifications
BS EN 61610:1996, IEC 61610:1995. Prints and transparencies produced from electronic sources. Assessment of image quality
BS EN 61619:1997, IEC 61619:1997. Insulation liquids. Contamination by polychlorinated biphenyls (PCBs). Method of determination by capillary column gas chromatography
BS EN 61620:1999, IEC 61620:1998. Insulating liquids. Determination of the dielectric dissipation factor by measurement of the conductance and capacitance. Test method
BS EN 61621:1997, IEC 61621:1997. Dry, solid insulating materials. Resistance test to high-voltage, low-current arc discharges
BS EN 61628-1:1998, IEC 61628-1:1997. Corrugated pressboard and presspaper for electrical purposesDefinitions, designations and general requirements
BS EN 61628-2:1999. Corrugated pressboard and presspaper for electrical purposesMethods of test
BS EN 61629-1:1997, IEC 61629-1:1996. Aramid pressboard for electrical purposesDefinitions, designations and general requirements
BS EN 61629-2:1997, IEC 61629-2:1996. Aramid pressboard for electrical purposesMethods of test
BS EN 61631:2001. Test method for the mechanical strength of cores made of magnetic oxides
BS EN 61642:1998, IEC 61642:1997. Industrial a.c. networks affected by harmonics. Application of filters and shunt capacitors
BS EN 61643-11:2002. Low-voltage surge protective devicesSurge protective devices connected to low-voltage power systems. Requirements and tests
BS EN 61643-11:2012. Low-voltage surge protective devicesSurge protective devices connected to low-voltage power systems. Requirements and test methods
BS EN 61643-21:2001+A2:2013. Low voltage surge protective devicesSurge protective devices connected to telecommunications and signalling networks. Performance requirements and testing methods
BS EN 61643-311:2001. Low voltage surge protective devicesSpecification for gas discharge tubes (GDT)
BS EN 61643-311:2013. Components for low-voltage surge protective devicesPerformance requirements and test circuits for gas discharge tubes (GDT)
BS EN 61643-312:2013. Components for low-voltage surge protective devicesSelection and application principles for gas discharge tubes
BS EN 61643-321:2002. Low voltage surge protective devicesSpecifications for avalanche breakdown diode (ABD)
BS EN 61643-331:2003. Low voltage surge protective devicesSpecification for metal oxide varistors (MOV)
BS EN 61643-341:2001. Low voltage surge protective devicesSpecification for thyristor surge suppressors (TSS)
BS EN 61646:1997, IEC 61646:1996. Thin-film terrestrial photovoltaic (PV) modules. Design qualification and type approval
BS EN 61646:2008. Thin-film terrestrial photovoltaic (PV) modules. Design qualification and type approval
BS EN 61649:2008. Weibull analysis
BS EN 61660-1:1997, IEC 61660-1:1997. Short-circuit currents in d.c auxiliary installations in power plants and substationsCalculation of short-circuit currents
BS EN 61660-2:1997, IEC 61660-2:1997. Short-circuit currents in d.c. auxiliary installations in power plants and substationsCalculation of effects
BS EN 61663-1:2000, IEC 61663-1:1999. Lightning protection. Telecommunication linesFibre optic installations
BS EN 61663-2:2001, IEC 61663-2:2001. Lightning protection. Telecommunication linesLines using metallic conductors
BS EN 61666:1997, IEC 61666:1997. Identification of terminals within a system
BS EN 61666:2010. Industrial systems, installations and equipment and industrial products. Identification of terminals within a system
BS EN 61669:2001, IEC 61669:2001. Electroacoustics. Equipment for the measurement of real-ear acoustical characteristics of hearing aids
BS EN 61672-1:2003. Electroacoustics. Sound level metersSpecifications
BS EN 61672-2:2003. Electroacoustics. Sound level metersPattern evaluation tests
BS EN 61672-3:2006. Electroacoustics. Sound level metersPeriodic tests
BS EN 61674:1998, IEC 61674:1997. Medical electric equipment. Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnosis imaging
BS EN 61674:2013. Medical electrical equipment. Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging
BS EN 61675-1:1998+A1:2008, IEC 61675-1:1998. Radionuclide imaging devices. Characteristics and test conditionsPositron emission tomographs
BS EN 61675-2:1998, IEC 61675-2:1998. Radionuclide imaging devices. Characteristics and test conditionsSingle photon emission computed tomographs
BS EN 61675-3:1998, IEC 61675-3:1998. Radionuclide imaging devices. Characteristics and test conditions.Gamma camera based wholebody imaging systems
BS EN 61676:2002+A1:2009. Medical electrical equipment. Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
BS EN 61683:2000, IEC 61683:1999. Photovoltaic systems. Power conditioners. Procedure for measuring efficiency
BS EN 61685:2002, IEC 61685:2001. Ultrasonics. Flow measurement systems. Flow test object
BS EN 61689:1997, IEC 61689:1996. Ultrasonics. Physiotherapy systems. Performance requirements and methods of measurement in the frequency range 0.5 MHz to 5 MHz
BS EN 61689:2007. Ultrasonics. Physiotherapy systems. Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz
BS EN 61689:2013. Ultrasonics. Physiotherapy systems. Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz
BS EN 61690-1/2:2000, IEC 61690-1:2000,IEC 61690-2:2000. Electronic design interchange format (EDIF)Part 1: Version 3 0 0; Part 2: Version 4 0 0 (CD-ROM)
BS EN 61690-S1 & 2:2000 (CD-ROM). BSEN61690-1:2000 & BSEN61690-2:2000 Electronic design interchange format (EDIF)Parts1 & 2: Version 3 0 0 and 4 0 0
BS EN 61690-S1 & 2:2000 (COVERS). BSEN61690-1:2000 & BSEN61690-2:2000 Electronic design interchange format (EDIF)Parts1 & 2: Version 3 0 0 and 4 0 0
BS EN 61691-1:1997, IEC 61691-1:1997. Design automationVHDL language reference manual
BS EN 61691-2:2001, IEC 61691-2:2001. Design automationBehavioural languages. VHDL multilogic system for model interoperability
BS EN 61691-3-2:2002 (DISK). BSEN61691-3-2:2002 Behaviour languagePart 3-2: Mathematical operation in VHDL
BS EN 61691-3-2:2002, IEC 61691-3-2:2001. Design automation. Behavioural languagesMathematical operation in VHDL
BS EN 61691-3-2:2002. BSEN61691-3-2:2002 Behaviour languagePart 3-2: Mathematical operation in VHDL
BS EN 61691-3-3:2002 (DISK). BSEN61691-3-3:2002 Behavioural LanguagesPart 3-3: Synthesis in VDHL
BS EN 61691-3-3:2002, IEC 61691-3-3:2001. Design automation. Behavioural languagesSynthesis in VHDL
BS EN 61691-3-3:2002. Design automation. Behavioural languagesSynthesis in VHDL
BS EN 617:2001+A1:2010. Continuous handling equipment and systems. Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
BS EN 61701:2000, IEC 61701:1995. Salt mist corrosion testing of photovoltaic (PV) modules
BS EN 61701:2012. Salt mist corrosion testing of photovoltaic (PV) modules
BS EN 61702:2000, IEC 61702:1995. Rating of direct coupled photovoltaic (PV) pumping systems
BS EN 61703:2002. Mathematical expressions for reliability, availability, maintainability and maintenance support terms
BS EN 61709:2000, IEC 61709:1996. Electronic components. Reliability. Reference conditions for failure rates and stress models for conversion
BS EN 61709:2011. Electric components. Reliability. Reference conditions for failure rates and stress models for conversion
BS EN 61710:2013. Power law model. Goodness-of-fit tests and estimation methods
BS EN 61721:2000, IEC 61721:1995. Susceptibility of a photovoltaic (PV) module to accidental impact damage (resistance to impact test)
BS EN 61724:1998, IEC 61724:1998. Photovoltaic system performance monitoring. Guidelines for measurement, data exchange and analysis
BS EN 61725:1997, IEC 61725:1997. Analytical expression for daily solar profiles
BS EN 61726:2000, IEC 61726:1999. Cable assemblies, cables, connectors and passive microwave components. Screening attenuation measurement by the reverberation chamber method
BS EN 61727:1996, IEC 61727:1995. Photovoltaic (PV) systems. Characteristics of the utility interface
BS EN 61730-1:2007+A2:2013. Photovoltaic (PV) module safety qualificationRequirements for construction
BS EN 61730-2:2007+A1:2012. Photovoltaic (PV) module safety qualificationRequirements for testing
BS EN 61733-1:1996, IEC 61733-1:1995. Measuring relays and protection equipment. Protection communication interfacingGeneral
BS EN 61744:2001, IEC 61744:2001. Calibration of fibre optic chromatic dispersion test sets
BS EN 61744:2005. Calibration of fibre optic chromatic dispersion test sets
BS EN 61746:2001, IEC 61746:2001. Calibration of optical time-domain reflectometers (OTDRs)
BS EN 61746:2005. Calibration of optical time-domain reflectometers (OTDR)
BS EN 61746-1:2011. Calibration of optical time-domain reflectometers (OTDR)OTDR for single-mode fibres
BS EN 61746-2:2011, BS 2000-521:2011. Calibration of optical time-domain reflectometers (OTDR)OTDR for multimode fibres
BS EN 61747-1:2000. Liquid crystal and solid-state display devicesGeneric specification
BS EN 61747-2:1999, IEC 61747-2:1998
BS EN 61747-2:1999, IEC 61747-2:1998. Liquid crystal and solid-state display devicesLiquid crystal display modules. Sectional specification
BS EN 61747-2:1999. Liquid crystal and solid-state display deviceLiquid crystal display modules. Sectional specification
BS EN 61747-2-1:2001, QC 720301:1998. Liquid crystal and solid-state display devicesPassive matrix monochrome LCD modules. Blank detail specification
BS EN 61747-2-1:2013. Liquid crystal display devicesPassive matrix monochrome LCD modules. Blank detail specification
BS EN 61747-2-2:2004. Liquid crystal display devicesMatrix colour LCD modules. Blank detail specification
BS EN 61747-3:2000, IEC 61747-3:1998. Liquid crystal and solid-state display devices.Sectional specification for liquid crystal display (LCD) cells
BS EN 61747-3:2006. Liquid crystal display devicesLiquid crystal display (LCD) cells. Sectional specification
BS EN 61747-30-1:2012. Liquid crystal display devicesMeasuring methods for liquid crystal display modules. Transmissive type
BS EN 61747-3-1:2000, IEC 61747-3-1:1998. Liquid crystal and solid-state display devicesLiquid crystal display (LCD) cells. Blank detail specification
BS EN 61747-3-1:2006. Liquid crystal display devicesLiquid crystal display (LCD) cells. Blank detail specification
BS EN 61747-4:1998, IEC 61747-4:1998. Liquid crystal and solid-state display devicesLiquid crystal display modules and cells. Essential ratings and characteristics
BS EN 61747-4:2012. Liquid crystal display devicesLiquid crystal display modules and cells. Essential ratings and characteristics
BS EN 61747-4-1:2004. Liquid crystal display devicesMatrix colour LCD modules. Essential ratings and characteristics
BS EN 61747-5:1998, IEC 61747-5:1998. Liquid crystal and solid-state display devicesEnvironmental, endurance and mechanical test methods
BS EN 61747-5-2:2011. Liquid crystal display devicesEnvironmental, endurance and mechanical test methods. Visual inspection of active matrix colour liquid crystal display modules
BS EN 61747-5-3:2010. Liquid crystal display devicesEnvironmental, endurance and mechanical test methods. Glass strength and reliability
BS EN 61747-6:2004. Liquid crystal and solid-state display devicesMeasuring methods for liquid crystal modules. Transmissive type
BS EN 61747-6-2:2011. Liquid crystal display devicesMeasuring methods for liquid crystal display modules. Reflective type
BS EN 61747-6-3:2011. Liquid crystal display devicesMeasuring methods for liquid crystal display modules. Motion artifact measurement of active matrix liquid crystal display modules
BS EN 61751:1998, IEC 61751:1998. Laser modules used for telecommunication. Reliability assessment
BS EN 61753-021-2:2002. Fibre optic interconnecting devices and passive components performance standard. Fibre optic connectors terminated on single-mode fibre for category CControlled environment
BS EN 61753-021-2:2008. Fibre optic interconnecting devices and passive components performance standardGrade C/3 single-mode fibre optic connectors for category C. Controlled environment
BS EN 61753-021-3:2013. Fibre optic interconnecting devices and passive components. Performance standardSingle-mode fibre optic connectors for category U. Uncontrolled environment
BS EN 61753-021-6:2008. Fibre optic interconnecting devices and passive components performance standardGrade B/2 single-mode fibre optic connectors for category O. Uncontrolled environment
BS EN 61753-022-2:2003. Fibre optic interconnecting devices and passive components performance standard. Fibre optic connectors terminated on multimode fibre for category CControlled environment
BS EN 61753-022-2:2013. Fibre optic interconnecting devices and passive components. Performance standardFibre optic connectors terminated on multimode fibre for category C. Controlled environment
BS EN 61753-031-3:2009. Fibre optic interconnecting devices and passive components performance standardNon-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices (NWBD) for Category U. Uncontrolled environment
BS EN 61753-051-3:2002, IEC 61753-051-3:2001. Fibre optic interconnecting devices and passive components performance standard.Single-mode fibre, plug-style fixed attenuators for category U. Uncontrolled environment
BS EN 61753-051-3:2013. Fibre optic interconnecting devices and passive components. Performance standardSingle-mode fibre, plug style fixed attenuators for category U. Uncontrolled environment
BS EN 61753-052-3:2002, IEC 61753-052-3:2001. Fibre optic interconnecting devices and passive components performance standard. Single-mode fibre, pigtailed-style fixed attenuators for category UUncontrolled environment
BS EN 61753-053-3:2004. Fibre optic interconnecting devices and passive components performance standardContinuously variable attenuators for category U
BS EN 61753-056-2:2013. Fibre optic interconnecting devices and passive components. Performance standardSingle mode fibre pigtailed style optical fuse for category C. Controlled environment
BS EN 61753-057-2:2013. Fibre optic interconnecting devices and passive components. Performance standardSingle mode fibre plug-receptacle style optical fuse for category C. Controlled environment
BS EN 61753-058-2:2013. Fibre optic interconnecting devices and passive components. Performance standardSingle mode fibre pigtailed style optical power limiter for category C. Controlled environment
BS EN 61753-059-2:2013. Fibre optic interconnecting devices and passive components. Performance standardSingle-mode fibre plug-receptacle style optical limiter for category C. Controlled environment
BS EN 61753-061-2:2012. Fibre optic interconnecting devices and passive components. Performance standardNon-connectorized single-mode fibre optic pigtailed isolators for category C. Controlled environment
BS EN 61753-061-3:2004. Fibre optic interconnecting devices and passive components performance standardSingle-mode fibre optic pigtailed style isolators for category U. Uncontrolled environment
BS EN 61753-062-6:2008. Fibre optic interconnecting devices and passive components performance standardNon-connectorized single-mode fibre optic pigtailed isolators for category O. Uncontrolled environment and sequential test
BS EN 61753-083-2:2008. Fibre optic interconnecting devices and passive components performance standardNon-connectorised single-mode fibre optic C-band/L-band WDM devices for category C. Controlled environment
BS EN 61753-084-2:2008. Fibre optic interconnecting devices and passive components performance standardNon connectorised single-mode 980/1550 nm WWDM devices for category C. Controlled environment
BS EN 61753-086-2:2009. Fibre optic interconnecting devices and passive components performance standardNon-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C. Controlled environment
BS EN 61753-086-6:2011. Fibre optic interconnecting devices and passive components. Performance standardNon-connectorized single-mode bidirectional 1490 / 1550 nm downstream and 1310 nm upstream WWDM devices for category O. Uncontrolled environment
BS EN 61753-087-2:2011. Fibre optic interconnecting devices and passive components. Performance standardNon-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C. Controlled environment
BS EN 61753-087-6:2012. Fibre optic interconnecting devices and passive components. Performance standardNon-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O. Uncontrolled environment
BS EN 61753-088-2:2013. Fibre optic interconnecting devices and passive components. Performance standardNon-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C. Controlled environments
BS EN 61753-089-2:2013. Fibre optic interconnecting devices and passive components. Performance standardNon-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C. Controlled environment
BS EN 61753-091-2:2013. Fibre optic interconnecting devices and passive components. Performance standardNon-connectorized single-mode fibre optic pigtailed circulators for category C. Controlled environment
BS EN 61753-091-3:2004. Fibre optic interconnecting devices and passive components performance standards. Performance standardSingle-mode fibre optic pigtailed style circulators for category U.
BS EN 61753-092-6:2007. Fibre optic interconnecting devices and passive components performance standardNon-connectorized single-mode circulators for category O. Uncontrolled environment and sequential test
BS EN 61753-1:2007. Fibre optic interconnecting devices and passive components performance standardGeneral and guidance for performance standards
BS EN 61753-101-2:2006. Fibre optic interconnecting devices and passive components performance standardFibre management systems for category C. Controlled environment
BS EN 61753-101-3:2009. Fibre optic interconnecting devices and passive components performance standardFibre management systems for category U. Uncontrolled environment
BS EN 61753-1-1:2001, IEC 61753-1-1:2000. Fibre optic interconnecting devices and passive components performance standard. General and guidanceInterconnecting devices (connectors)
BS EN 61753-111-7:2010. Fibre optic interconnecting devices and passive components performance standardSealed closures for category A. Aerial
BS EN 61753-111-8:2010. Fibre optic interconnecting devices and passive components performance standardSealed closures for category G. Ground
BS EN 61753-111-9:2010. Fibre optic interconnecting devices and passive components performance standardSealed closures for category S. Subterranean
BS EN 61753-121-2:2010. Fibre optic interconnecting devices and passive components. Performance standardsSimplex and duplex cords with singlemode fibre and cylindrical ferrule connectors for category C. Controlled environment
BS EN 61753-121-3:2010. Fibre optic interconnecting devices and passive components. Performance standardSimplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category U. Uncontrolled environment
BS EN 61753-131-3:2011. Fibre optic interconnecting devices and passive components. Performance standardSingle-mode mechanical fibre splice for category U. Uncontrolled environment
BS EN 61753-141-2:2011. Fibre optic interconnecting devices and passive components. Performance standardFibre optic passive chromatic dispersion compensator using single-mode dispersion compensating fibre for category C. Controlled environments
BS EN 61753-143-2:2013. Fibre optic interconnecting devices and passive components. Performance standardOptical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C. Controlled environment
BS EN 61753-2-1:2001, IEC 61753-2-1:2000. Fibre optic interconnecting devices and passive components performance standard. Fibre optic connectors terminated on single-mode fibre for category UUncontrolled environment
BS EN 61753-2-3:2001, IEC 61753-2-3:2001. Fibre optic interconnecting devices and passive components performance standard. Fibre optic connectors terminated on single-mode fibre for category UNon connectorised single mode 1xN and 2xN non-wavelength-selective branching devices for category U. Uncontrolled environment
BS EN 61754-1:1997, IEC 61754-1:1996. Fibre optic connector interfacesGeneral and guidance
BS EN 61754-10:2001, IEC 61754-10:2000. Fibre optic connector interfacesType Mini-MPO connector family
BS EN 61754-10:2005. Fibre optic connector interfaces Type Mini-MPO connector family
BS EN 61754-12:2000, IEC 61754-12:1999. Fibre optic connector interfacesType FS connector family
BS EN 61754-13:1999, IEC 61754-13:1999. Fibre optic connector interfacesType FC-PC connector family
BS EN 61754-13:2006. Fibre optic connector interfacesType FC-PC connector
BS EN 61754-15:2001, IEC 61754-15:1999. Fibre optic connector interfacesType LSH connector family
BS EN 61754-15:2009. Fibre optic interconnecting devices and passive components. Fibre optic connector interfacesType LSH connector family
BS EN 61754-16:2000, IEC 61754-16:1999. Fibre optic connector interfacesType PN connector family
BS EN 61754-18:2002, IEC 61754-18:2001. Fibre optic connector interfacesType MT-RJ connector family
BS EN 61754-19:2002, IEC 61754-19:2001. Fibre optic connector interfacesType SG connector family
BS EN 61754-2:1997, IEC 61754-2:1996. Fibre optic connector interfacesType BFOC/2,5 connector family
BS EN 61754-20:2002. Fibre optic connector interfacesType LC connector family
BS EN 61754-20:2012. Fibre optic interconnecting devices and passive components. Fibre optic connector interfacesType LC connector family
BS EN 61754-20-100:2012. Fibre optic interconnecting devices and passive components. Fibre optic connector interfacesInterface standard for LC connectors with protective housings related to IEC 61076-3-106
BS EN 61754-21:2005. Fibre optic connector interfacesType SMI connector family for plastic optical fibre
BS EN 61754-22:2005. Fibre optic connector interfacesType F-SMA connector family
BS EN 61754-23:2005. Fibre optic connector interfacesType LX.5 connector family
BS EN 61754-24:2010. Fibre optic interconnecting devices and passive components. Fibre optic connector interfacesType SC-RJ connector family
BS EN 61754-24-11:2009. Fibre optic interconnecting devices and passive components. Fibre optic connector interfacesType SC-RJ connectors with protective housings based on IEC 61076-3-117
BS EN 61754-24-21:2009. Fibre optic interconnecting devices and passive components. Fibre optic connector interfacesType SC-RJ connectors with protective housings based on IEC 61076-3-106, variant 06
BS EN 61754-25:2009. Fibre optic connector interfacesType RAO connector family
BS EN 61754-26:2012. Fibre optic interconnecting devices and passive components. Fibre optic connector interfacesType SF connector family
BS EN 61754-27:2013. Fibre optic interconnecting devices and passive components. Fibre optic connector interfacesType M12-FO connector family
BS EN 61754-28:2012. Fibre optic interconnecting devices and passive components. Fibre optic connector interfacesType LF3 connector family
BS EN 61754-29:2012. Fibre optic interconnecting devices and passive components. Fibre optic connector interfacesType BLINK connector series
BS EN 61754-3:2002. Fibre optic connector interfacesType LSA connector family
BS EN 61754-4:1997, IEC 61754-4:1997. Fibre optic connector interfacesType SC connector family
BS EN 61754-4-1:2003. Fibre optic connector interfaces. Type SC connector familySimplified receptacle SC-PC connector interfaces
BS EN 61754-5:2002, IEC 61754-5:1996. Fibre optic connector interfacesType MT connector family
BS EN 61754-5:2005. Fibre optic connector interfacesType MT connector family
BS EN 61754-6:1997, IEC 61754-6:1997. Fibre optic connector interfacesType MU connector family
BS EN 61754-6-1:2003. Fibre optic connector interfacesType MU connector family. Simplified receptacle MU-PC connector interfaces
BS EN 61754-7:2001. Fibre optic connector interfacesType MPO connector family
BS EN 61754-7:2005. Fibre optic connector interfacesType MPO connector family
BS EN 61754-7:2008. Fibre optic interconnecting devices and passive components. Fibre optic connector interfacesType MPO connector family
BS EN 61754-8:1997, IEC 61754-8:1996. Fibre optic connector interfacesType CF08 connector family
BS EN 61754-9:2001. Fibre optic connector interfacesType DS connector family
BS EN 61755-1:2006. Fibre optic connector optical interfacesOptical interfaces for single mode non-dispersion shifted fibres. General and guidance
BS EN 61755-2-1:2006. Fibre optic connector optical interfacesOptical interface standard single mode non-angled physically contacting fibres
BS EN 61755-2-2:2006. Fibre optic connector optical interfacesOptical interface standard single mode angled physically contacting fibres
BS EN 61755-3-1:2009. Fibre optic connector optical interfacesOptical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre
BS EN 61755-3-2:2009. Fibre optic connector optical interfacesOptical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres
BS EN 61755-3-5:2006. Fibre optic connector optical interfacesOptical interface
BS EN 61755-3-6:2006+A1:2012. Fibre optic connector optical interfacesOptical interface. 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre
BS EN 61755-3-7:2009. Fibre optic interconnecting devices and passive Components. Fibre optic connector optical interfacesOptical interface, 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using titanium as fibre surrounding material, single mode fibre
BS EN 61755-3-8:2009. Fibre optic interconnecting devices and passive Components. Fibre optic connector optical interfacesOptical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding material, single mode fibre
BS EN 61756-1:2006. Fibre optic interconnecting devices and passive components. Interface standard for fibre management systemsGeneral and guidance
BS EN 61757-1:1999, IEC 61757-1:1998. Fibre optic sensorsGeneric specification
BS EN 61757-1:2012. Fibre optic sensorsGeneric specification
BS EN 61758-1:2008. Fibre optic interconnecting devices and passive components. Interface standard for closuresGeneral and guidance
BS EN 61760-1:1999, IEC 61760-1:1998. Surface mounting technologyStandard method for the specification of surface mounting components (SMDs)
BS EN 61760-1:2006. Surface mounting technologyStandard method for the specification of surface mounting components (SMDs)
BS EN 61760-2:1998, IEC 61760-2:1998. Surface mounting technologyTransportation and storage conditions of surface mounting devices (SMD). Application guide
BS EN 61760-2:2007. Surface mounting technologyTransportation and storage conditions of surface mounting devices (SMD). Application guide
BS EN 61760-3:2010. Surface mounting technologyStandard method for the specification of components for through hole reflow (THR) soldering
BS EN 61770:1999, IEC 61770:1998. Electric appliances connected to the water mains. Avoidance of backsiphonage and failure of hose-sets
BS EN 61770:1999+A2:2006, IEC 61770:1998. Electric appliances connected to the water mains. Avoidance of backsiphonage and failure of hose-sets
BS EN 61770:2009. Electric appliances connected to the water mains. Avoidance of backsiphonage and failure of hose-sets
BS EN 61772:2013. Nuclear power plants. Control rooms. Application of visual display units (VDUs)
BS EN 61773:1997, IEC 61773:1996. Overhead lines. Testing of foundations for structures
BS EN 61779-1:2000. Electrical apparatus for the detection and measurement of flammable gasesGeneral requirements and test methods
BS EN 61779-2:2000. Electrical apparatus for the detection and measurement of flammable gasesPerformance requirements for group I apparatus indicating a volume fraction up to 5% methane in the air
BS EN 61779-3:2000. Electrical apparatus for the detection and measurement of flammable gasesPerformance requirements for group I apparatus indicating a volume fraction up to 100% methane in air
BS EN 61779-4:2000. Electrical apparatus for the detection and measurement of flammable gasesPerformance requirements for group II apparatus indicating a volume fraction up to 100% lower explosive limit
BS EN 61779-5:2000. Electrical apparatus for the detection and measurement of flammable gasesPerformance requirements for group II apparatus indicating a volume fraction up to 100% gas
BS EN 61784-1:2004. Digital data communications for measurement and controlProfile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems
BS EN 61784-1:2008. Industrial communication networks. ProfilesFieldbus profiles
BS EN 61784-1:2010. Industrial communication networks. ProfilesFieldbus profiles
BS EN 61784-2:2008. Industrial communication networks. ProfilesAdditional fieldbus profiles for real-time networks based on ISO/IEC 8802-3
BS EN 61784-2:2010. Industrial communication networks. ProfilesAdditional fieldbus profiles for real-time networks based on ISO/IEC 8802-3
BS EN 61784-3:2008. Industrial communication networks. ProfilesFunctional safety fieldbuses. General rules and profile definitions
BS EN 61784-3:2010. Industrial communication networks. ProfilesFunctional safety fieldbuses. General rules and profile definitions
BS EN 61784-3-1:2008. Industrial communication networks. ProfilesFunctional safety fieldbuses. Additional specifications for CPF 1
BS EN 61784-3-1:2010. Industrial communication networks. ProfilesFunctional safety fieldbuses. Additional specifications for CPF 1
BS EN 61784-3-12:2010. Industrial communication networks. ProfilesFunctional safety fieldbuses. Additional specifications for CPF 12
BS EN 61784-3-13:2010. Industrial communication networks. ProfilesFunctional safety fieldbuses. Additional specifications for CPF 13
BS EN 61784-3-14:2010. Industrial communication networks. ProfilesFunctional safety fieldbuses. Additional specifications for CPF 14
BS EN 61784-3-18:2011. Industrial communication networks. ProfilesFunctional safety fieldbuses. Additional specifications for CPF 18
BS EN 61784-3-2:2008. Industrial communication networks. ProfilesFunctional safety fieldbuses. Additional specifications for CPF 2
BS EN 61784-3-2:2010. Industrial communication networks. ProfilesFunctional safety fieldbuses. Additional specifications for CPF 2
BS EN 61784-3-3:2008. Industrial communication networks. ProfilesFunctional safety fieldbuses. Additional specifications for CPF 3
BS EN 61784-3-3:2010. Industrial communication networks. ProfilesFunctional safety fieldbuses. Additional specifications for CPF 3
BS EN 61784-3-6:2008. Industrial communication networks. ProfilesFunctional safety fieldbuses. Additional specifications for CPF 6
BS EN 61784-3-6:2010. Industrial communication networks. ProfilesFunctional safety fieldbuses. Additional specifications for CPF 6
BS EN 61784-3-8:2010. Industrial communication networks. ProfilesFunctional safety fieldbuses. Additional specifications for CPF 8
BS EN 61784-5-10:2008. Industrial communication networks. ProfilesInstallation of fieldbuses. Installation profiles for CPF 10
BS EN 61784-5-10:2012. Industrial communication networks. ProfilesInstallation of fieldbuses. Installation profiles for CPF 10
BS EN 61784-5-11:2008. Industrial communication networks. ProfilesInstallation of fieldbuses. Installation profiles for CPF 11
BS EN 61784-5-11:2012. Industrial communication networks. ProfilesInstallation of fieldbuses. Installation profiles for CPF 11
BS EN 61784-5-12:2012. Industrial communication networks. ProfilesInstallation of fieldbuses. Installation profiles for CPF 12
BS EN 61784-5-14:2012. Industrial communication networks. ProfilesInstallation of fieldbuses. Installation profiles for CPF 14
BS EN 61784-5-15:2012. Industrial communication networks. ProfilesInstallation of fieldbuses. Installation profiles for CPF 15
BS EN 61784-5-2:2008. Industrial communication networks. ProfilesInstallation of fieldbuses. Installation profiles for CPF 2
BS EN 61784-5-2:2012. Industrial communication networks. ProfilesInstallation of fieldbuses. Installation profiles for CPF 2
BS EN 61784-5-3:2008. Industrial communication networks. ProfilesInstallation of fieldbuses. Installation profiles for CPF 3
BS EN 61784-5-3:2012. Industrial communication networks. ProfilesInstallation of fieldbuses. Installation profiles for CPF 3
BS EN 61784-5-4:2012. Industrial communication networks. ProfilesInstallation of fieldbuses. Installation profiles for CPF 4
BS EN 61784-5-6:2008. Industrial communication networks. ProfilesInstallation of fieldbuses. Installation profiles for CPF 6
BS EN 61784-5-6:2012. Industrial communication networks. ProfilesInstallation of fieldbuses. Installation profiles for CPF 6
BS EN 61788-1:1998, IEC 61788-1:1998. SuperconductivityCritical current measurement. DC critical current of Cu/Nb-Ti composite superconductors
BS EN 61788-1:2007. SuperconductivityCritical current measurement. D.C. critical current of Nb-Ti composite superconductors
BS EN 61788-10:2006
BS EN 61788-10:2006. SuperconductivityCritical temperature measurement. Critical temperature of composite superconductors by a resistance method
BS EN 61788-11:2003
BS EN 61788-11:2011. SuperconductivityResidual resistance ratio measurement. Residual resistance ratio of Nb$D3Sn composite superconductors
BS EN 61788-13:2003. SuperconductivityAC loss measurements. Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
BS EN 61788-13:2012. SuperconductivityAC loss measurements. Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
BS EN 61788-14:2010. SuperconductivitySuperconducting power devices. General requirements for characteristic tests of current leads designed for powering superconducting devices
BS EN 61788-15:2011. SuperconductivityElectronic characteristic measurements. Intrinsic surface impedance of superconductor films at microwave frequencies
BS EN 61788-16:2013. SuperconductivityElectronic characteristic measurements. Power-dependent surface resistance of superconductors at microwave frequencies
BS EN 61788-17:2013. SuperconductivityElectronic characteristic measurements. Local critical current density and its distribution in large-area superconducting films
BS EN 61788-3:2001. SuperconductivityCritical current measurement. DC critical current of Ag-sheathed Bi-2212 and Bi-2223 oxide superconductors
BS EN 61788-3:2006. SuperconductivityCritical current measurement. DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors
BS EN 61788-4:2001. SuperconductivityResidual resistance ratio measurement. Residual resistance ratio of Nb-Ti composite superconductors
BS EN 61788-4:2007. SuperconductivityResidual resistance ratio measurement. Residual resistance ratio of Nb-Ti composite superconductors
BS EN 61788-4:2011. SuperconductivityResidual resistance ratio measurement. Residual resistance ratio of Nb-Ti composite superconductors
BS EN 61788-5:2001. SuperconductivityMatrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
BS EN 61788-5:2013. SuperconductivityMatrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
BS EN 61788-6:2001. SuperconductivityMechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors
BS EN 61788-6:2008. SuperconductivityMechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors
BS EN 61788-6:2011. SuperconductivityMechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors
BS EN 61788-7:2002. SuperconductivityElectronic characteristic measurements. Surface resistance of superconductors at microwave frequencies
BS EN 61788-7:2006. SuperconductivityElectronic characteristic measurements. Surface resistance of superconductors at microwave frequencies
BS EN 61788-8:2003. SuperconductivityAC loss measurements. Total AC loss measurement of Cu/Nb-Ti composite superconducting wires exposed to a transverse alternating magnetic field by a pickup coil method
BS EN 61788-8:2010. SuperconductivityAC loss measurements. Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method
BS EN 61788-9:2005. SuperconductivityMeasurements for bulk high temperature superconductors. Trapped flux density of large grain oxide superconductors
BS EN 61797-1:1997, IEC 61797-1:1996. Transformers and inductors for use in telecommunication and electronic equipment. Main dimensions of coil formersCoil formers for laminated cores
BS EN 618:2002+A1:2010. Continuous handling equipment and systems. Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
BS EN 61800-1:1998, IEC 61800-1:1997. Adjustable speed electrical power drive systemsRating specifications for low voltage adjustable speed d.c. power drive systems
BS EN 61800-2:1998, IEC 61800-2:1998. Adjustable speed electrical power drive systemsGeneral requirements. Rating specifications for low voltage adjustable frequency a.c. power drive systems
BS EN 61800-3:1997. Adjustable speed electrical power drive systemsEMC product standard including specific test methods
BS EN 61800-3:2004+A1:2012. Adjustable speed electrical power drive systemsEMC requirements and specific test methods
BS EN 61800-4:2003. Adjustable speed electrical power drive systemsGeneral requirements. Rating specifications for a.c. power drive systems above 1000 V a.c. and not exceeding 35 kV
BS EN 61800-5-1:2003. Adjustable speed electrical power drive systems. Safety requirementsElectrical, thermal and energy
BS EN 61800-5-1:2007. Adjustable speed electrical power drive systemsSafety requirements. Electrical, thermal and energy
BS EN 61800-5-2:2007. Adjustable speed electrical power drive systemsSafety requirements. Functional
BS EN 61800-7-1:2008. Adjustable speed electrical power drive systemsGeneric interface and use of profiles for power drive systems. Interface definition
BS EN 61800-7-201:2008. Adjustable speed electrical power drive systemsGeneric interface and use of profiles for power drive systems. Profile type 1 specification
BS EN 61800-7-202:2008. Adjustable speed electrical power drive systemsGeneric interface and use of profiles for power drive systems. Profile type 2 specification
BS EN 61800-7-203:2008. Adjustable speed electrical power drive systemsGeneric interface and use of profiles for power drive systems. Profile type 3 specification
BS EN 61800-7-204:2008. Adjustable speed electrical power drive systemsGeneric interface and use of profiles for power drive Systems. Profile type 4 specification
BS EN 61800-7-301:2008. Adjustable speed electrical power drive systemsGeneric interface and use of profiles for power drive systems. Mapping of profile type 1 to network technologies
BS EN 61800-7-302:2008. Adjustable speed electrical power drive systemsGeneric interface and use of profiles for power drive systems. Mapping of profile type 2 to network technologies
BS EN 61800-7-303:2008. Adjustable speed electrical power drive systemsGeneric interface and use of profiles for power drive systems. Mapping of profile type 3 to network technologies
BS EN 61800-7-304:2008. Adjustable speed electrical power drive systemsGeneric interface and use of profiles for power drive systems. Mapping of profile type 4 to network technologies
BS EN 61803:1999+A1:2010. Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters
BS EN 61804-2:2004. Function blocks (FB) for process controlSpecification of FB concept and electronic device description language (EDDL)
BS EN 61804-2:2007. Function blocks (FB) for process controlSpecification of FB concept and electronic device description language (EDDL)
BS EN 61804-3:2007. Function blocks (FB) for process controlElectronic device description language (EDDL)
BS EN 61804-3:2011. Function blocks (FB) for process controlElectronic device description language (EDDL)
BS EN 61808:2001, IEC 61808:1999. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-metal hydride button rechargeable single cells
BS EN 61809:2001, IEC 61809:2000. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for portable sealed alkaline secondary cells and batteries
BS EN 61810-1:1999, IEC 61810-1:1998. Electromechanical non-specified time all-or-nothing relaysGeneral requirements
BS EN 61810-1:2008. Electromechanical elementary relaysGeneral requirements
BS EN 61810-2:2005. Electromechanical elementary relaysReliability
BS EN 61810-2:2011. Electromechanical elementary relaysReliability
BS EN 61810-2-1:2011. Electromechanical elementary relaysReliability. Procedure for the verification of B10 values
BS EN 61810-5:1999, IEC 61810-5:1998. Electromechanical non-specified time all-or-nothing relaysInsulation coordination
BS EN 61810-7:2006. Electromechanical elementary relaysTest and measurement procedures
BS EN 61811-1:1999. Electromechanical non-specified time all-or-nothing relays of assessed qualityGeneric specification
BS EN 61811-10:2003. Electromechanical all-or-nothing relaysSectional specification. Relays for industrial application
BS EN 61811-11:2003. Electromechanical all-or-nothing relaysBlank detail specification. Relays for industrial application
BS EN 61811-50:2002. Electromechanical all-or-nothing relaysSectional specification. Electromechanical all-or-nothing telecom relays of assessed quality
BS EN 61811-51:2002. Electromechanical all-or-nothing relaysBlank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Non-standardized types and construction
BS EN 61811-52:2002. Electromechanical all-or-nothing relaysBlank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 20 mm x 10 mm base
BS EN 61811-53:2002. Electromechanical all-or-nothing relaysBlank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 14 mm x 9 mm base
BS EN 61811-54:2002. Electromechanical non-specified time all-or-nothing relays of assessed qualityBlank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 15 mm x 7,5 mm base
BS EN 61811-55:2002. Electromechanical non-specified time all-or-nothing relays of assessed qualityBlank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 11 mm x 7,5 mm (max.) base
BS EN 61812-1:1997, IEC 61812-1:1996. Specified time relays for industrial useRequirements and tests
BS EN 61812-1:2011. Time relays for industrial and residential useRequirements and tests
BS EN 61817:2001, IEC 61817:2000. Household portable appliances for cooking, grilling and similar use. Methods for measuring performance
BS EN 61821:2003. Electrical installation for lighting and beaconing of aerodromes. Maintenance of aeronautical ground lighting constant current series circuits
BS EN 61821:2011. Electrical installations for lighting and beaconing of aerodromes. Maintenance of aeronautical ground lighting constant current series circuits
BS EN 61822:2003. Electrical installations for lighting and beaconing of aerodromes. Constant current regulators
BS EN 61822:2009. Electrical installations for lighting and beaconing of aerodromes. Constant current regulators
BS EN 61823:2003. Electrical installations for lighting and beaconing of aerodromes. AGL series transformers
BS EN 61828:2002, IEC 61828:2001. Ultrasonics. Focusing transducers. Definitions and measurement methods for the transmitted fields
BS EN 61829:1998, IEC 61829:1995. Crystalline silicon photovoltaic (PV) array. On-site measurement of I-V characteristics
BS EN 61830:1998, IEC 61830:1997. Microwave ferrite components. Measuring methods for major properties
BS EN 61834-1:1998, IEC 61834-1:1998. Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems)General specifications
BS EN 61834-10:2001, IEC 61834-10:2001. Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems)DTV format
BS EN 61834-11:2008. Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems)HDV format for 1080i and 720p systems
BS EN 61834-2:1999, IEC 61834-2:1998. Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems)SD format for 525-60 and 625-50 systems
BS EN 61834-3:2000, IEC 61834-3:1999. Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems)HD format for 1125-60 and 1250-50 systems
BS EN 61834-4:1998+A1:2011. Recording Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems)Pack header table and contents
BS EN 61834-5:1998, IEC 61834-5:1998. Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems)The character information system
BS EN 61834-6:2001, IEC 61834-6:2000. Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems)SDL format
BS EN 61834-7:2001, IEC 61834-7:2001. Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems)EDTV2 format
BS EN 61834-8:2001. Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems)PALplus format for the 625-50 system
BS EN 61834-9:2001. Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems)DVB format
BS EN 61835:1998, IEC 61835:1998. Helical-scan digital component video cassette recording system using 12,65 mm (0,5 in) magnetic tape. Format D-5
BS EN 61837-1:1999, IEC 61837-1:1999. Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections.Plastic moulded enclosure outlines
BS EN 61837-1:2012. Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connectionsPlastic moulded enclosure outlines
BS EN 61837-2:2001. Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections.Ceramic enclosures
BS EN 61837-2:2011. Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connectionsCeramic enclosures
BS EN 61837-3:2001, IEC 61837-3:2000. Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections.Metal enclosures
BS EN 61837-4:2004. Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connectionsHybrid enclosure outlines
BS EN 61842:2002. Microphones and earphones for speech communications
BS EN 61843:1997, IEC 61843:1997. Measuring method for the level of intermodulation products generated in a gyromagnetic device
BS EN 61846:1999, IEC 61846:1998. Ultrasonics. Pressure pulse lithotripters. Characteristics of fields
BS EN 61847:1998, IEC 61847:1998. Ultrasonics. Surgical systems. Measurement and declaration of the basic output characteristics
BS EN 61850-10:2005. Communication networks and systems in substationsConformance testing
BS EN 61850-10:2013. Communication networks and systems for power utility automationConformance testing
BS EN 61850-3:2002, IEC 61850-3:2002. Communication networks and systems in substationsGeneral requirements
BS EN 61850-4:2002, IEC 61850-4:2002. Communication networks and systems in substationsSystem and project management
BS EN 61850-4:2011. Communication networks and systems for power utility automationSystem and project management
BS EN 61850-5:2003. Communication networks and systems in substationsCommunication requirements for functions and device models
BS EN 61850-5:2013. Communication networks and systems for power utility automationCommunication requirements for functions and device models
BS EN 61850-6:2004. Communication networks and systems in substationsConfiguration description language for communication in electrical substations related to IEDs
BS EN 61850-6:2010. Communication networks and systems for power utility automationConfiguration description language for communication in electrical substations related to IEDs
BS EN 61850-7-1:2003. Communication networks and systems in substations. Basic communication structure for substation and feeder equipmentPrinciples and models
BS EN 61850-7-1:2011. Communication networks and systems for power utility automationBasic communication structure. Principles and models
BS EN 61850-7-2:2003. Communication networks and systems in substations. Basic communication structure for substation and feeder equipmentAbstract communication service interface (ACSI)
BS EN 61850-7-2:2010. Communication networks and systems for power utility automationBasic information and communication structure. Abstract communication service interface (ACSI)
BS EN 61850-7-3:2003. Communication networks and systems in substations. Basic communication structure for substation and feeder equipmentCommon data classes
BS EN 61850-7-3:2011. Communication networks and systems for power utility automationBasic communication structure. Common data classes
BS EN 61850-7-4:2003. Communication networks and systems in substations. Basic communication structure for substation and feeder equipmentCompatible logical node classes and data classes
BS EN 61850-7-4:2010. Communication networks and systems for power utility automationBasic communication structure. Compatible logical node classes and data object classes
BS EN 61850-7-410:2007. Communication networks and systems for power utility automationHydroelectric power plants. Communication for monitoring and control
BS EN 61850-7-410:2013. Communication networks and systems for power utility automationBasic communication structure. Hydroelectric power plants. Communication for monitoring and control
BS EN 61850-7-420:2009. Communication networks and systems for power utility automationBasic communication structure. Distributed energy resources logical nodes
BS EN 61850-8-1:2004. Communication networks and systems in substations. Specific communication service mapping (SCSM)Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3
BS EN 61850-8-1:2011. Communication networks and systems for power utility automationSpecific communication service mapping (SCSM). Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3
BS EN 61850-9-1:2003. Communication networks and systems in substations. Specific communication service mapping (SCSM)Sampled values over serial unidirectional multidrop point to point link
BS EN 61850-9-2:2004. Communication networks and systems in substationsSpecific communication service mapping (SCSM)
BS EN 61850-9-2:2011. Communication networks and systems for power utility automationSpecific communication service mapping (SCSM). Sampled values over ISO/IEC 8802-3
BS EN 61851-1:2001, IEC 61851-1:2001. Electric vehicle conductive charging systemGeneral requirements
BS EN 61851-1:2011. Electric vehicle conductive charging systemGeneral requirements
BS EN 61851-21:2002. Electric vehicle conductive charging systemElectric vehicle requirements for conductive connection to an a.c./d.c. supply
BS EN 61851-22:2002. Electric vehicle conductive charging systemA.C. electric vehicle charging station
BS EN 61853-1:2011. Photovoltaic (PV) module performance testing and energy ratingIrradiance and temperature performance measurements and power rating
BS EN 61854:1998, IEC 61854:1998. Overhead lines. Requirements and tests for spacers
BS EN 61855:2003. Household electrical hair care appliances. Methods of measuring the performance
BS EN 61857-1:1999, IEC 61857-1:1998. Electrical insulation systems. Procedures for thermal evaluationGeneral requirements. Low-voltage
BS EN 61857-1:2005. Electrical insulation systems. Procedures for thermal evaluationGeneral requirements. Low-voltage
BS EN 61857-1:2009. Electrical insulation systems. Procedures for thermal evaluationGeneral requirements. Low-voltage
BS EN 61857-21:1999, IEC 61857-21:1998. Electrical insulation systems. Procedures for thermal evaluationSpecific requirements for general-purpose model. Wire-wound applications
BS EN 61857-21:2004. Electrical insulation systems. Procedures for thermal evaluationSpecific requirements for general purpose models. Wire-wound applications
BS EN 61857-21:2009. Electrical insulation systems. Procedures for thermal evaluationSpecific requirements for general-purpose models. Wire-wound applications
BS EN 61857-22:2002. Electrical insulation systems. Procedures for thermal evaluationSpecific requirements for encapsulated-coil model. Wire-wound electrical insulation system (EIS)
BS EN 61857-22:2008. Electrical insulation systems. Procedures for thermal evaluationSpecific requirements for encapsulated-coil model. Wire-wound electrical insulation system (EIS)
BS EN 61857-23:2002. Electrical insulation systems. Procedures for thermal evaluationSpecific requirements for general purpose, tall-channel model. Wire-wound electrical insulation system (EIS)
BS EN 61858:2000, IEC 61858:1999. Electrical insulation systems. Thermal evaluation of modifications to an established wire-wound EIS
BS EN 61858:2005. Electrical insulation systems. Thermal evaluation of modifications to an established wire-wound EIS
BS EN 61858:2008. Electrical insulation systems. Thermal evaluation of modifications to an established wire-wound EIS
BS EN 61860:2001, IEC 61860:2000. Dimension of low-profile cores made of magnetic oxides
BS EN 61866:1997, IEC 61866:1997. Audiovisual systems. Interactive text transmission system (ITTS)
BS EN 61868:1999, IEC 61868:1998. Mineral insulating oils. Determination of kinematic viscosity at very low temperatures
BS EN 61869-1:2009. Instrument transformersGeneral requirements
BS EN 61869-2:2012. Instrument transformersAdditional requirements for current transformers
BS EN 61869-3:2011. Instrument transformersAdditional requirements for inductive voltage transformers
BS EN 61869-5:2011. Instrument transformersAdditional requirements for capacitor voltage transformers
BS EN 61881:2000, IEC 61881:1999. Railway applications. Rolling stock equipment. Capacitors for power electronics
BS EN 61881-1:2011. Railway applications. Rolling stock equipment. Capacitors for power electronicsPaper/plastic film capacitors
BS EN 61881-2:2012. Railway applications. Rolling stock equipment. Capacitors for power electronicsAluminium electrolytic capacitors with non solid electrolyte
BS EN 61881-3:2012. Railway applications. Rolling stock equipment. Capacitors for power electronicsElectric double-layer capacitors
BS EN 61883-1:1998, IEC 61883-1:1998. Consumer audio/video equipment. Digital interfaceGeneral
BS EN 61883-1:2003. Consumer audio/video equipment. Digital interfaceGeneral
BS EN 61883-1:2009. Consumer audio/video equipment. Digital interfaceGeneral
BS EN 61883-2:1998, IEC 61883-2:1998. Consumer audio/video equipment. Digital interfaceSD-DVCR data transmission
BS EN 61883-2:2005. Consumer audio/video equipment. Digital interfaceSD-DVCR data transmission
BS EN 61883-3:1998, IEC 61883-3:1998. Consumer audio/video equipment. Digital interfaceHD-DVCR data transmission
BS EN 61883-3:2005. Consumer audio/video equipment. Digital interfaceHD-DVCR data transmission
BS EN 61883-4:1998, IEC 61883-4:1998. Consumer audio/video equipment. Digital interfaceMPEG2-TS data transmission
BS EN 61883-4:2005. Consumer audio/video equipment. Digital interfaceMPEG2-TS data transmission
BS EN 61883-5:1998, IEC 61883-5:1998. Consumer audio/video equipment. Digital interfaceSDL-DVCR data transmission
BS EN 61883-5:2005. Consumer audio/video equipment. Digital interfaceSDL-DVCR data transmission
BS EN 61883-6:2002. Consumer audio/video equipment. Digital interfaceAudio and music data transmission protocol
BS EN 61883-6:2005. Consumer audio/video equipment. Digital interfaceAudio and music data transmission
BS EN 61883-7:2003. Consumer audio/video equipment. Digital interfaceTransmission of ITU-R BO.1294 System B
BS EN 61883-8:2009. Consumer audio/video equipment. Digital interfaceTransmission of ITU-R BT.601 style digital video data
BS EN 61897:1999, IEC 61897:1998. Overhead lines. Requirements and tests for Stockbridge type aeolian vibration dampers
BS EN 619:2002+A1:2010. Continuous handling equipment and systems. Safety and EMC requirements for equipment for mechanical handling of unit loads
BS EN 61904:2001, IEC 61904:2000. Video recording. Helical-scan digital component video cassette recording format using 12,65mm magnetic tape and incorporating data compression (Format digital-L)
BS EN 61907:2010. Communication network dependability engineering
BS EN 61909:2000, IEC 61909:2000. Audio recording. Minidisc system
BS EN 61914:2009. Cable cleats for electrical installations
BS EN 61915-1:2008. Low-voltage switchgear and controlgear. Device profiles for networked industrial devicesGeneral rules for the development of device profiles
BS EN 61915-2:2012. Low-voltage switchgear and controlgear. Device profiles for networked industrial devicesRoot device profiles for starters and similar equipment
BS EN 61918:2008. Industrial communication networks. Installation of communication networks in industrial premises
BS EN 61920:1998, IEC 61920:1998. Infrared transmission systems. Free air applications
BS EN 61920:2004. Infrared free air applications
BS EN 61921:2003. Power capacitors. Low-voltage power factor correction banks
BS EN 61922:2002. High-frequency induction heating installations. Test methods for the determination of power output of the generator
BS EN 61924:2006. Maritime navigation and radiocommunication equipment and systems. Integrated navigation systems. Operational and performance requirements, methods of testing and required test results
BS EN 61924-2:2013. Maritime navigation and radiocommunication equipment and systems. Integrated navigation systemsModular structure for INS. Operational and performance requirements, methods of testing and required test results
BS EN 61925:2006. Multimedia systems and equipment. Multimedia home server systems. Vocabulary of home server
BS EN 61926-1:2001, IEC 61926-1:1999. Design automationStandard test language for all systems. Common abbreviated test language for all systems (C/ATLAS)
BS EN 61935-1:2001, IEC 61935-1:2000. Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173Installed cabling
BS EN 61935-1:2005. Testing of balanced communication cabling in accordance with standards series EN 50173Installed cabling
BS EN 61935-1:2009. Specification for the testing of balanced and coaxial information technology cablingInstalled balanced cabling as specified in the standards series EN 50173
BS EN 61935-2:2003. Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173Patch cords and work area cords
BS EN 61935-2:2005. Testing of balanced communication cabling in accordance with standards series EN 50173Patch cords and work area cords
BS EN 61935-2:2010. Specification for the testing of balanced and coaxial information technology cablingCords as specified in ISO/IEC 11801 and related standards
BS EN 61935-2-20:2009. Testing of balanced communication cabling in accordance with series EN 50173Patch cords and work area cords. Blank detail specification for class D applications
BS EN 61935-3:2009. Testing of balanced and coaxial information technology cablingInstalled cabling as specified in EN 50173-4 and related standards
BS EN 61936-1:2010. Power installations exceeding 1 kV a.c.Common rules
BS EN 61937:2001. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958
BS EN 61937-1:2003. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC60958General
BS EN 61937-1:2007+A1:2011. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958General
BS EN 61937-10:2011. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958Non-linear PCM bitstreams according to the MPEG-4 Audio Lossless Coding (ALS) format
BS EN 61937-11:2010. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958MPEG-4 AAC and its extensions in LATM/LOAS
BS EN 61937-12:2010. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958Non-linear PCM bitstreams according to the DRA formats
BS EN 61937-2:2003. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958Burst-info
BS EN 61937-2:2007+A1:2011. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958Burst-info
BS EN 61937-3:2003. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958Non-linear PCM bitstreams according to the AC-3 format
BS EN 61937-3:2009. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958Non-linear PCM bitstreams according to the AC-3 and enhanced AC-3 formats
BS EN 61937-4:2003. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958Non-linear PCM bitstreams according to the MPEG audio format
BS EN 61937-5:2002. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958Non-linear PCM bitstreams according to the DTS (Digital Theater Systems) format(s)
BS EN 61937-5:2006. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958Non-linear PCM bitstreams according to the DTS (digital theatre systems) format(s)
BS EN 61937-6:2002. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958Non-linear PCM bitstreams according to the MPEG-2 AAC format
BS EN 61937-6:2006. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958Non-linear PCM bitstreams according to the MPEG-2 AAC and MPEG-4 AAC audio formats
BS EN 61937-7:2002. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958Non-linear PCM bitstreams according to the ATRAC and ATRAC 2/3 formats
BS EN 61937-7:2005. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats
BS EN 61937-8:2007. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958Non-linear PCM bitstreams according to the Windows Media Audio (WMA) Professional format
BS EN 61937-9:2007. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958Non-linear PCM bitstreams according to the MAT format
BS EN 61938:1997, IEC 61938:1996. Audio, video and audiovisual systems. Interconnections and matching values. Preferred matching values of analogue signals
BS EN 61938:2013. Multimedia systems. Guide to the recommended characteristics of analogue interfaces to achieve interoperability
BS EN 61943:1999, IEC 61943:1999,QC 211001:1999. Integrated circuits. Manufacturing line approval application guideline
BS EN 61947-1:2002. Electronic projection. Measurement and documentation of key performance criteriaFixed resolution projectors
BS EN 61947-2:2002. Electronic projection. Measurement and documentation of key performance criteriaVariable resolution projectors
BS EN 61951-1:2001, IEC 61951-1:2001. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cellsNickel-cadmium
BS EN 61951-1:2003. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cellsNickel-cadmium
BS EN 61951-2:2001, IEC 61951-2:2001. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cellsNickel-metal hydride
BS EN 61951-2:2003. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cellsNickel-metal hydride
BS EN 61951-2:2011. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cellsNickel-metal hydride
BS EN 61952:2008. Insulators for overhead lines. Composite line post insulators for A.C. systems with a nominal voltage greater than 1000 V. Definitions, test methods and acceptance criteria
BS EN 61953:1998, IEC 61953:1997. Diagnostic X-ray imaging equipment. Characteristics of mammographic anti-scatter grids
BS EN 61954:2000, IEC 61954:1999. Power electronics for electrical transmission and distribution systems. Testing of thyristor valves for static VAR compensators
BS EN 61954:2011+A1:2013. Static VAR compensators (SVC). Testing of thyristor valves
BS EN 61958:2001, IEC 61958:2000. High-voltage prefabricated switchgear and controlgear assemblies. Voltage presence indicating systems
BS EN 61959:2004. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Mechanical tests for sealed portable secondary cells and batteries
BS EN 61960:2004. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for portable applications
BS EN 61960:2011. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for portable applications
BS EN 61960-1:2001, IEC 61960-1:2000. Secondary lithium cells and batteries for portable applicationsSecondary lithium cells
BS EN 61960-2:2002, IEC 61960-2:2001. Secondary lithium cells and batteries for portable applicationsSecondary lithium batteries
BS EN 61964:1999, IEC 61964:1999. Integrated circuits. Memory devices pin configurations
BS EN 61965:2001. Mechanical safety of cathode ray tubes
BS EN 61965:2003. Mechanical safety of cathode ray tubes
BS EN 61966-12-1:2011. Multimedia systems and equipment. Colour measurement and managementMetadata for identification of colour gamut (Gamut ID)
BS EN 61966-2-1:2000, IEC 61966-2-1:1999. Multimedia systems and equipment. Colour measurement and management.Colour management. Default RGB colour space. sRGB
BS EN 61966-2-2:2003. Multimedia systems and equipment. Colour measurement and managementColour management. Extended RGB colour space. scRGB
BS EN 61966-2-4:2006. Multimedia systems and equipment. Colour measurement and managementColour management
BS EN 61966-2-5:2008. Multimedia systems and equipment. Colour measurement and managementColour management. Optional RGB colour space. opRGB
BS EN 61966-3:2000, IEC 61966-3:2000. Multimedia systems and equipment. Colour measurement and managementEquipment using cathode ray tubes
BS EN 61966-4:2000, IEC 61966-4:2000. Multimedia systems and equipment. Colour measurement and managementEquipment using liquid crystal display panels
BS EN 61966-5:2001, IEC 61966-5:2000. Multimedia systems and equipment. Colour measurement and managementEquipment using plasma display panels
BS EN 61966-5:2009. Multimedia systems and equipment. Colour measurement and managementEquipment using plasma display panels
BS EN 61966-6:2006. Multimedia systems and equipment. Colour measurement and managementFront projection displays
BS EN 61966-7-1:2002. Multimedia systems and equipment. Colour measurement and management. Colour printersReflective prints. RGB inputs
BS EN 61966-7-1:2006. Multimedia systems and equipment. Colour measurement and managementColour printers. Reflective prints. RGB inputs
BS EN 61966-8:2001, IEC 61966-8:2001. Multimedia systems and equipment. Colour measurement and managementMultimedia colour scanners
BS EN 61966-9:2001, IEC 61966-9:2000. Multimedia systems and equipment. Colour measurement and managementDigital cameras
BS EN 61966-9:2004. Multimedia systems and equipment. Colour measurement and managementDigital cameras
BS EN 61967-1:2002, IEC 61967-1:2002. Integrated circuits. Measurement of electromagnetic emissions, 150 kHz to 1 GHzGeneral conditions and definitions
BS EN 61967-2:2005. Integrated circuits. Measurement of electromagnetic emissions, 150 kHz to 1 GHzMeasurement of radiated emissions. TEM cell and wideband TEM cell method
BS EN 61967-4:2002. Integrated circuits. Measurement of electromagnetic emissions, 150 kHz to 1 GHzMeasurement of conducted emissions. 1 ohm/150 ohm direct coupling method
BS EN 61967-5:2003. Integrated circuits. Measurement of electromagnetic emissions, 150 kHz to 1 GHzMeasurement of conducted emissions. Workbench Faraday Cage method
BS EN 61967-6:2002+A1:2008. Integrated circuits. Measurement of electromagnetic emissions, 150 kHz to 1 GHzMeasurement of conducted emissions. Magnetic probe method
BS EN 61967-8:2011. Integrated circuits. Measurement of electromagnetic emissionsMeasurement of radiated emissions. IC stripline method
BS EN 61968-1:2004. Application integration at electric utilities. System interfaces for distribution managementInterface architecture and general requirements
BS EN 61968-1:2013. Application integration at electric utilities. System interfaces for distribution managementInterface architecture and general recommendations
BS EN 61968-11:2010. Application integration at electric utilities. System interfaces for distribution managementCommon information model (CIM) extensions for distribution
BS EN 61968-11:2013. Application integration at electric utilities. System interfaces for distribution managementCommon information model (CIM) extensions for distribution
BS EN 61968-13:2008. Application integration at electric utilities. System interfaces for distribution managementCIM RDF Model exchange format for distribution
BS EN 61968-3:2004. Application integration at electric utilities. System interfaces for distribution managementInterface for network operations
BS EN 61968-4:2007. Application integration at electric utilities. System interfaces for distribution managementInterfaces for records and asset management
BS EN 61968-9:2009. Application integration at electric utilities. System interfaces for distribution managementInterface for meter reading and control
BS EN 61969-1:2000, IEC 61969-1:1999. Mechanical structures for electronic equipment. Outdoor enclosuresDesign guidelines
BS EN 61969-1:2012. Mechanical structures for electronic equipment. Outdoor enclosuresDesign guidelines
BS EN 61969-2:2000, IEC 61969-2:2000. Mechanical structures for electronic equipment. Outdoor enclosuresSectional specification. Coordination dimensions for cases and cabinets
BS EN 61969-2:2012. Mechanical structures for electronic equipment. Outdoor enclosuresCoordination dimensions
BS EN 61969-2-1:2000, IEC 61969-2-1:2000. Mechanical structures for electronic equipment. Outdoor enclosures. Detail specificationDimensions for cabinets
BS EN 61969-2-2:2000, IEC 61969-2-2:2000. Mechanical structures for electronic equipment. Outdoor enclosures. Detail specificationDimensions for cases
BS EN 61969-3:2001, IEC 61969-3:2001. Mechanical structures for electronic equipment. Outdoor enclosuresSectional specification. Climatic, mechanical tests and safety aspects for cabinets and cases
BS EN 61969-3:2012. Mechanical structures for electronic equipment. Outdoor enclosuresEnvironmental requirements, tests and safety aspects
BS EN 61970-1:2006. Energy management system application program interface (EMS-API)Guidelines and general requirements
BS EN 61970-301:2004. Energy management system application program interface (EMS-API)Common information model (CIM) Base
BS EN 61970-301:2011. Energy management system application program interface (EMS-API)Common information model (CIM) base
BS EN 61970-301:2013. Energy management system application program interface (EMS-API)Common information model (CIM) base
BS EN 61970-402:2008. Energy management system application program interface (EMS-API)Common services
BS EN 61970-403:2008. Energy management system application program interface (EMS-API)Generic data access
BS EN 61970-404:2007. Energy management system application program interface (EMS-API)High speed data access (HSDA)
BS EN 61970-405:2007. Energy management system application program interface (EMS-API)Generic eventing and subscription (GES)
BS EN 61970-407:2007. Energy management system application program interface (EMS-API)Time series data access (TSDA)
BS EN 61970-453:2008. Energy management system application program interface (EMS-API)CIM based graphics exchange
BS EN 61970-456:2013. Energy management system application program interface (EMS-API)Solved power system state profiles
BS EN 61970-501:2006. Energy management system application program interface (EMS-API)Common information model resource description framework (CIM RDF) schema
BS EN 61975:2010. High-voltage direct current (HVDC) installations. System tests
BS EN 61977:2002, IEC 61977:2002. Fibre optic filters. Generic specification
BS EN 61977:2010. Fibre optic interconnecting devices and passive components. Fibre optic filters. Generic specification
BS EN 61978-1:2001, IEC 61978-1:2000. Fibre optic passive dispersion compensatorsGeneric specification
BS EN 61978-1:2010. Fibre optic interconnecting devices and passive components. Fibre optic passive chromatic dispersion compensatorsGeneric specification
BS EN 61982:2012. Secondary batteries (except lithium) for the propulsion of electric road vehicles. Performance and endurance tests
BS EN 61982-1:2006. Secondary batteries for the propulsion of electric road vehiclesTest parameters
BS EN 61982-2:2002. Secondary batteries for the propulsion of electric road vehiclesDynamic discharge performance test and dynamic endurance test
BS EN 61982-3:2001, IEC 61982-3:2001. Secondary batteries for the propulsion of electric road vehiclesPerformance and life testing (traffic compatible, urban use vehicles)
BS EN 61984:2001, IEC 61984:2001. Connectors. Safety requirements and tests
BS EN 61984:2009. Connectors. Safety requirements and tests
BS EN 61986:2002, IEC 61986:2002. Rotating electrical machines. Equivalent loading and super-position techniques. Indirect testing to determine temperature rise
BS EN 61987-1:2007. Industrial-process measurement and control. Data structures and elements in process equipment cataloguesMeasuring equipment with analogue and digital output
BS EN 61987-10:2009. Industrial-process measurement and control. Data structures and elements in process equipment cataloguesLists of properties (LOPs) for industrial-process measurement and control for electronic data exchange. Fundamentals
BS EN 61987-11:2012. Industrial-process measurement and control. Data structures and elements in process equipment cataloguesList of Properties (LOP) of measuring equipment for electronic data exchange. Generic structures
BS EN 61988-1:2003. Plasma display panelsTerminology and letter symbols
BS EN 61988-1:2011. Plasma display panelsTerminology and letter symbols
BS EN 61988-2-1:2002. Plasma display panels. Measuring methodsOptical
BS EN 61988-2-1:2012. Plasma display panelsMeasuring methods. Optical and optoelectrical
BS EN 61988-2-2:2003. Plasma display panels. Measuring methodsOptoelectrical
BS EN 61988-2-3:2009. Plasma display panelsMeasuring methods. Image quality. Defects and degradation
BS EN 61988-2-4:2011. Plasma display panelsMeasuring methods. Visual quality. Image artifacts
BS EN 61988-2-5:2012. Plasma display panelsMeasuring methods. Acoustic noise
BS EN 61988-3-1:2005. Plasma display panelsMechanical interface
BS EN 61988-3-2:2009. Plasma display panelsInterface. Electrical interface
BS EN 61988-4:2007. Plasma display panelsClimatic and mechanical testing methods
BS EN 61988-5:2009. Plasma display panelsGeneric specification
BS EN 61993-1:2001, IEC 61993-1:1999. Maritime navigation and radiocommunication equipment and systemsShipborne automatic transponder system installation using VHF digital selective calling (DSC) techniques. Operational and performance requirements, methods of testing and required test results
BS EN 61993-2:2002, IEC 61993-2:2001. Maritime navigation and radiocommunication equipment and systemsClass A shipborne equipment of the universal automatic identification system (AIS). Operational and performance requirements, methods of test and required test results
BS EN 61993-2:2013. Maritime navigation and radiocommunication equipment and systems. Automatic Identification Systems (AIS)Class A shipborne equipment of the automatic identification system (AIS). Operational and performance requirements, methods of test and required test results
BS EN 61995-1:2008. Devices for the connection of luminaires for household and similar purposesGeneral requirements
BS EN 61995-2:2009. Devices for the connection of luminaires for household and similar purposesStandard sheets for DCL
BS EN 61996:2001, IEC 61996:2000. Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR). Performance requirements. Methods of testing and required test results
BS EN 61996-1:2008. Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR)Voyage data recorder (VDR). Performance requirements, methods of testing and required test results
BS EN 61996-1:2013. Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR)Performance requirements, methods of testing and required test results
BS EN 61996-2:2006. Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR)Simplified voyage data recorder (S-VDR). Performance requirements, methods of testing and required test results
BS EN 61996-2:2008. Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR)Simplified voyage data recorder (S-VDR). Performance requirements, methods of testing and required test results
BS EN 620:2002+A1:2010. Continuous handling equipment and systems. Safety and EMC requirements for fixed belt conveyors for bulk materials
BS EN 62002-1:2006. Mobile and portable DVB-T/H radio accessInterface specification
BS EN 62002-1:2008. Mobile and portable DVB-T/H radio accessInterface specification
BS EN 62002-2:2006. Mobile and portable DVB-T/H radio accessInterface conformance testing
BS EN 62002-2:2008. Mobile and portable DVB-T/H radio accessInterface conformance testing
BS EN 62004:2009. Thermal-resistant aluminium alloy wire for overhead line conductor
BS EN 62005-1:2001, IEC 62005-1:2001. Reliability of fibre optic interconnecting devices and passive optical componentsIntroductory guide and definitions
BS EN 62005-2:2001. Reliability of fibre optic interconnecting devices and passive optical componentsQuantitative assessment of reliability based on accelerated ageing tests. Temperature and humidity, steady state
BS EN 62005-3:2001. Reliability of fibre optic interconnecting devices and passive optical componentsRelevant tests for evaluating failure modes and failure mechanisms for passive components
BS EN 62005-4:2000, IEC 62005-4:1999. Reliability of fibre optic interconnecting devices and passive optical componentsProduct screening
BS EN 62005-7:2004. Reliability of fibre optic interconnecting devices and passive optical componentsLife stress modeling
BS EN 62006:2011. Hydraulic machines. Acceptance tests of small hydroelectric installations
BS EN 62007-1:2000, IEC 62007-1:1997. Semiconductor optoelectronic devices for fibre optic system applicationsEssential ratings and characteristics
BS EN 62007-1:2009. Semiconductor optoelectronic devices for fibre optic system applicationsSpecification template for essential ratings and characteristics
BS EN 62007-2:2000, IEC 62007-2:1997. Semiconductor optoelectronic devices for fibre optic system applicationsMeasuring methods
BS EN 62007-2:2009. Semiconductor optoelectronic devices for fibre optic system applicationsMeasuring methods
BS EN 62008:2005. Performance characteristics and caliberation for digital data acquisition systems and relevant software
BS EN 62011-1:2002. Insulating materials. Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposesDefinitions, designations and general requirements
BS EN 62011-3-1:2003. Insulating materials. Industrial rigid moulded laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposesSpecifications for indiviual materials. Tubes and rods of rectangular and hexagonal cross-section
BS EN 62012-1:2002. Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environmentsGeneric specification
BS EN 62013-1:2002. Caplights for use in mines susceptible to firedampGeneral requirements. Construction and testing in relation to the risk of explosion
BS EN 62013-1:2006. Caplights for use in mines susceptible to firedampGeneral requirements. Construction and testing in relation to the risk of explosion
BS EN 62013-2:2001, IEC 62013-2:2000. Caplights for use in mines susceptible to firedampPerformance and other safety-related matters
BS EN 62013-2:2006. Caplights for use in mines susceptible to firedampPerformance and other safety-related matters
BS EN 62014-1:2002. Electronic design automation librariesInput/Output buffer information specifications (IBIS version 3.2)
BS EN 62018:2003. Power consumption of information technology equipment. Measurement methods
BS EN 62019:1999, IEC 62019:1999. Electrical accessories. Circuit-breakers and similar equipment for household use. Auxiliary contact units
BS EN 62020:1999, IEC 62020:1998. Electrical accessories. Residual current monitors for household and similar uses (RCMs)
BS EN 62021-1:2003. Insulating liquids. Determination of acidityAutomatic potentiometric titration
BS EN 62021-2:2007. Insulating liquids. Determination of acidityColourimetric titration
BS EN 62022:2007. Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles
BS EN 62023:2001, IEC 62023:2000. Structuring of technical information and documentation
BS EN 62023:2012. Structuring of technical information and documentation
BS EN 62024-1:2002. High frequency inductive components. Electrical characteristics and measuring methodsNanohenry range chip inductor
BS EN 62024-1:2008. High frequency inductive components. Electrical characteristics and measuring methodsNanohenry range chip inductor
BS EN 62024-2:2009. High frequency inductive components. Electrical characteristics and measuring methodsRated current of inductors for DC to DC converters
BS EN 62025-1:2002. High frequency inductive components. Non-electrical characteristics and measuring methodsFixed, surface mounted inductors for use in electronic and telecommunication equipment
BS EN 62025-1:2007. High frequency inductive components. Non-electrical characteristics and measuring methodsFixed, surface mounted inductors for use in electronic and telecommunication equipment
BS EN 62025-2:2005. High frequency inductive components. Non-electrical characteristics and measuring methodsTest methods for non-electrical characteristics
BS EN 62026-1:2007. Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs)General rules
BS EN 62026-3:2009. Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs)DeviceNet
BS EN 62026-7:2013. Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs)CompoNet
BS EN 62027:2001. Preparation of parts lists
BS EN 62027:2012. Preparation of object lists, including parts lists
BS EN 62028:2004. General methods of measurement for digital television receivers
BS EN 62031:2008+A1:2013. LED modules for general lighting. Safety specifications
BS EN 62034:2006. Automatic test systems for battery powered emergency escape lighting
BS EN 62034:2012. Automatic test systems for battery powered emergency escape lighting
BS EN 62035:2000+A2:2012. Discharge lamps (excluding fluorescent lamps). Safety specifications
BS EN 62037:2000, IEC 62037:1999. RF connectors, connector cable assemblies and cables. Intermodulation level measurement
BS EN 62037-1:2012. Passive RF and microwave devices, intermodulation level measurementGeneral requirements and measuring methods
BS EN 62037-2:2013. Passive RF and microwave devices, intermodulation level measurementMeasurement of passive intermodulation in coaxial cable assemblies
BS EN 62037-3:2012. Passive RF and microwave devices, intermodulation level measurementMeasurement of passive intermodulation in coaxial connectors
BS EN 62037-4:2012. Passive RF and microwave devices, intermodulation level measurementMeasurement of passive intermodulation in coaxial cables
BS EN 62037-5:2013. Passive RF and microwave devices, intermodulation level measurementMeasurement of passive intermodulation in filters
BS EN 62037-6:2013. Passive RF and microwave devices, intermodulation level measurementMeasurement of passive intermodulation in antennas
BS EN 62040-1:2008+A1:2013. Uninterruptible power systems (UPS)General and safety requirements for UPS
BS EN 62040-1-1:2003. Uninterruptible power systems (UPS).General and safety requirements for UPS used in operator access areas
BS EN 62040-1-2:2003. Uninterruptible power systems (UPS).General and safety requirements for UPS used in restricted access locations
BS EN 62040-2:2006. Uninterruptible power systems (UPS)Electromagnetic compatibility (EMC) requirements
BS EN 62040-3:2001. Uninterruptible power systems (UPS)Method of specifying the performance and test requirements
BS EN 62040-3:2011. Uninterruptible power systems (UPS)Method of specifying the performance and test requirements
BS EN 62041:2003. Power transformers, power supply units, reactors and similar products. EMC requirements
BS EN 62041:2010. Safety of transformers, reactors, power supply units and combinations thereof. EMC requirements
BS EN 62044-1:2002. Cores made of soft magnetic materials. Measuring methodsGeneric specification
BS EN 62044-2:2005. Cores made of soft magnetic materials. Measuring methodsMagnetic properties at low excitation level
BS EN 62044-3:2001. Cores made of soft magnetic materials. Measuring methodsMagnetic properties at high excitation level
BS EN 62047-1:2006. Semiconductor devices. Micro-electromechanical devicesTerms and definitions
BS EN 62047-10:2011. Semiconductor devices. Micro-electromechanical devicesMicro-pillar compression test for MEMS materials
BS EN 62047-11:2013. Semiconductor devices. Micro-electromechanical devicesTest method for coefficients of linear thermal expansion of free-standing materials for micro-electromechanical systems
BS EN 62047-12:2011. Semiconductor devices. Micro-electromechanical devicesBending fatigue testing method of thin film materials using resonant vibration of MEMS structures
BS EN 62047-13:2012. Semiconductor devices. Micro-electromechanical devicesBend-and shear-type test methods of measuring adhesive strength for MEMS structures
BS EN 62047-14:2012. Semiconductor devices. Micro-electromechanical devicesForming limit measuring method of metallic film materials
BS EN 62047-2:2006. Semiconductor devices. Micro-electromechanical devicesTensile testing method of thin film materials
BS EN 62047-3:2006. Semiconductor devices. Micro-electromechanical devicesThin film standard test piece for tensile testing
BS EN 62047-4:2010. Semiconductor devices. Micro-electromechanical devicesGeneric specification for MEMS
BS EN 62047-5:2011. Semiconductor devices. Micro-electromechanical devicesRF MEMS switches
BS EN 62047-6:2010. Semiconductor devices. Micro-electromechanical devicesAxial fatigue testing methods of thin film materials
BS EN 62047-7:2011. Semiconductor devices. Micro-electromechanical devicesMEMS BAW filter and duplexer for radio frequency control and selection
BS EN 62047-8:2011. Semiconductor devices. Micro-electromechanical devicesStrip bending test method for tensile property measurement of thin films
BS EN 62047-9:2011. Semiconductor devices. Micro-electromechanical devicesWafer to wafer bonding strength measurement for MEMS
BS EN 62052-11:2003. Electricity metering equipment (AC). General requirements, tests and test conditionsMetering equipment
BS EN 62052-21:2004. Electricity metering equipment (a.c.). General requirements, tests and test conditionsTariff and load control equipment
BS EN 62053-11:2003. Electricity metering equipment (a.c.). Particular requirementsElectromechanical meters for active energy (classes 0,5, 1 and 2)
BS EN 62053-21:2003. Electricity metering equipment (a.c.). Particular requirementsStatic meters for active energy (classes 1 and 2)
BS EN 62053-22:2003. Electricity metering equipment (a.c.). Particular requirementsStatic meters for active energy (classes 0,2 S and 0,5 S)
BS EN 62053-23:2003. Electricity metering equipment (a.c.). Particular requirementsStatic meters for reactive energy (classes 2 and 3) (www.tecert.com)
BS EN 62053-31:1999, IEC 62053-31:1998. Electricity metering equipment (a.c.). Particular requirementsPulse output devices for electromechanical and electronic meters (two wires only)
BS EN 62053-52:2005. Electricity metering equipment (AC). Particular requirementsSymbols
BS EN 62053-61:1999, IEC 62053-61:1998. Electricity metering equipment (a.c.). Particular requirementsPower consumption and voltage requirements
BS EN 62054-11:2004. Electricity metering equipment (a.c.). Tariff and load controlParticular requirements for electronic ripple control receivers
BS EN 62054-21:2004. Electricity metering equipment (a.c.). Tariff and load controlParticular requirements for time switches
BS EN 62055-31:2005. Electricity metering. Payments systemsParticular requirements. Static payment meters for active energy (classes 1 and 2)
BS EN 62056-21:2002. Electricity metering. Data exchange for meter reading, tariff and load controlDirect local data exchange
BS EN 62056-31:2000. Electricity metering. Data exchange for meter reading, tariff and load controlUse of local area networks on twisted pair with carrier signalling
BS EN 62056-42:2002, IEC 62056-42:2002. Electricity metering. Data exchange for meter reading, tariff and load controlPhysical layer services and procedures for connection-oriented asynchronous data exchange
BS EN 62056-46:2002. Electricity metering. Data exchange for meter reading, tariff and load controlData link layer using HDLC protocol
BS EN 62056-47:2007. Electricity metering. Data exchange for meter reading, tariff and load controlCOSEM transport layers for IPv4 networks
BS EN 62056-53:2002. Electricity metering. Data exchange for meter reading, tariff and load controlCOSEM application layer
BS EN 62056-53:2007. Electricity metering. Data exchange for meter reading, tariff and load controlCOSEM application layer
BS EN 62056-61:2002, IEC 62056-61:2002. Electricity metering. Data exchange for meter reading, tariff and load controlObject identification system (OBIS)
BS EN 62056-61:2007. Electricity metering. Data exchange for meter reading, tariff and load controlObject identification system (OBIS)
BS EN 62056-6-1:2013. Electricity metering data exchange. The DLMS/COSEM suiteObject Identification System (OBIS)
BS EN 62056-62:2002. Electricity metering. Data exchange for meter reading, tariff and load controlInterface classes
BS EN 62056-62:2007. Electricity metering. Data exchange for meter reading, tariff and load controlInterface classes
BS EN 62056-6-2:2013. Electricity metering data exchange. The DLMS/COSEM suiteCOSEM interface classes
BS EN 62056-7-6:2013. Electricity metering data exchange. The DLMS/COSEM suiteThe 3-layer, connection-oriented HDLC based communication profile
BS EN 62056-8-3:2013. Electricity metering data exchange. The DLMS/COSEM suiteCommunication profile for PLC S-FSK neighbourhood networks
BS EN 62058-11:2010. Electricity metering equipment (a.c.). Acceptance inspectionGeneral acceptance inspection methods
BS EN 62058-21:2010. Electricity metering equipment (a.c.). Acceptance inspectionParticular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2 and class indexes A and B)
BS EN 62058-31:2010. Electricity metering equipment (a.c.). Acceptance inspectionParticular requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2, and class indexes A, B and C)
BS EN 62059-31-1:2008. Electricity metering equipment. DependabilityAccelerated reliability testing. Elevated temperature and humidity
BS EN 62059-32-1:2012. Electricity metering equipment. DependabilityDurability. Testing of the stability of metrological characteristics by applying elevated temperature
BS EN 62059-41:2006. Electricity metering equipment. DependabilityReliability prediction
BS EN 62061:2005+A1:2013. Safety of machinery. Functional safety of safety-related electrical, electronic and programmable electronic control systems
BS EN 62065:2002. Maritime navigation and radiocommunication equipment and systems. Track control systems. Operational and performance requirements, methods of testing and required test results
BS EN 62068-1:2003. Electrical insulation systems. Electrical stresses produced by repetitive impulsesGeneral method of evaluation of electrical endurance
BS EN 62070:2001. Broadcast digital video tape recorders. Identification method for recording and/or reproduction error status
BS EN 62071:2001, IEC 62071:2000. Helical-scan compressed digital video cassette recording system using 6,35mm magnetic tape. Forum D-7
BS EN 62071-1:2006. Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape. Format D-7VTR specifications
BS EN 62071-2:2006. Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape. Format D-7Compression format
BS EN 62071-3:2006. Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape. Format D-7Data stream format
BS EN 62074-1:2009. Fibre optic interconnecting devices and passive components. Fibre optic WDM devicesGeneric specification
BS EN 62075:2008. Audio/video, information and communication technology equipment. Environmentally conscious design
BS EN 62075:2012. Audio/video, information and communication technology equipment. Environmentally conscious design
BS EN 62076:2006. Industrial electroheating installations. Test methods for induction channel and induction crucible furnaces
BS EN 62077:2001, IEC 62077:2001. Fibre optic circulators. Generic specification
BS EN 62077:2010. Fibre optic interconnecting devices and passive components. Fibre optic circulators. Generic specification
BS EN 62079:2001 . Preparation of instructions. Structuring, content and presentation
BS EN 62079:2001(diskette of annex B&C).
BS EN 62079:2001, IEC 62079:2001. Preparation of instructions. Structuring, content and presentation
BS EN 62080:2009. Sound signalling devices for household and similar purposes
BS EN 62083:2001, IEC 62083:2000. Medical electrical equipment. Requirements for the safety of radiotherapy treatment planning systems
BS EN 62083:2009. Medical electrical equipment. Requirements for the safety of radiotherapy treatment planning systems
BS EN 62086-1:2005, IEC 62086-1:2001. Electrical apparatus for explosive gas atmospheres. Electrical resistance trace heating General and testing requirements
BS EN 62086-2:2005, IEC 62086-2:2001. Electrical apparatus for explosive gas atmospheres. Electrical resistance trace heatingApplication guide for design, installation and maintenance
BS EN 62087:2003. Methods of measurement for the power consumption of audio, video and related equipment
BS EN 62087:2009. Methods of measurement for the power consumption of audio, video and related equipment
BS EN 62090:2003. Product package labels for electronic components using bar code and two-dimensional symbologies
BS EN 62092:2002, IEC 62092:2001. Ultrasonics. Hydrophones. Characteristics and calibration in the frequency range from 15 MHz to 40 MHz
BS EN 62093:2005. Balance-of-system components for photovoltaic systems. Design qualification natural environments
BS EN 62094-1:2003. Indicator light units for household and similar fixed-electrical installationsGeneral requirements
BS EN 62097:2009. Hydraulic machines, radial and axial. Performance conversion method from model to prototype
BS EN 62099:2001, IEC 62099:2001. Fibre optic wavelength switches. Generic specification
BS EN 621:1998. Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
BS EN 621:2009. Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
BS EN 62104:2007. Characteristics of DAB receivers
BS EN 62105:2002. Digital audio broadcasting system. Specification of the receiver data interface (RDI)
BS EN 62106:2001. Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 to 108,0 MHz
BS EN 62106:2009. Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 MHz to 108,0 MHz
BS EN 62107:2002, IEC 62107:2000. Super video compact disc. Disc-interchange system-specification
BS EN 62108:2008. Concentrator photovoltaic (CPV) modules and assemblies. Design qualification and type approval
BS EN 62109-1:2010. Safety of power converters for use in photovoltaic power systemsGeneral requirements
BS EN 62109-2:2011. Safety of power converters for use in photovoltaic power systemsParticular requirements for inverters
BS EN 62110:2009. Electric and magnetic field levels generated by AC power systems. Measurement procedures with regard to public exposure
BS EN 62114:2001, IEC 62114:2001. Electrical insulation systems (EIS). Thermal classification
BS EN 62115:2005+A11:2012. Electric toys. Safety
BS EN 62116:2011. Test procedure of islanding prevention measures for utility-interconnected photovoltaic inverters
BS EN 62121:2001. Methods of measurement for minidisc recorders/players
BS EN 62122:2002. Methods of measurement for consumer-use digital VTRs. Electronic and mechanical performances
BS EN 62124:2005. Photovoltaic (PV) stand-alone systems. Design verification
BS EN 62127-1:2007+A1:2013. Ultrasonics. HydrophonesMeasurement and characterization of medical ultrasonic fields up to 40 MHz
BS EN 62127-2:2007+A1:2013. Ultrasonics. HydrophonesCalibration for ultrasonic fields up to 40 MHz
BS EN 62127-3:2007+A1:2013. Ultrasonics. HydrophonesProperties of hydrophones for ultrasonic fields up to 40 MHz
BS EN 62129:2006. Calibration of optical spectrum analyzers
BS EN 62129-2:2011. Calibration of wavelength/optical frequency measurement instrumentsMichelson interferometer single wavelength meters
BS EN 62132-1:2006. Integrated circuits. Measurement of electromagnetic immunity, 150 kHz to 1 GHzGeneral conditions and definitions
BS EN 62132-2:2011. Integrated circuits. Measurement of electromagnetic immunityMeasurement of radiated immunity. TEM cell and wideband TEM cell method
BS EN 62132-3:2007. Integrated circuits. Measurement of electromagnetic immunity, 150 kHz to 1 GHzBulk current injection (BCI) method
BS EN 62132-4:2006. Integrated circuits. Measurement of electromagnetic immunity. 150 kHz to 1 GHzDirect RF power injection method
BS EN 62132-5:2006. Integrated circuits. Measurement of electromagnetic immunity, 150 kHz to 1 GHzWorkbench Faraday cage method
BS EN 62132-8:2012. Integrated circuits. Measurement of electromagnetic immunityMeasurement of radiated immunity. IC stripline method
BS EN 62133:2003. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
BS EN 62133:2013. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
BS EN 62134-1:2002. Fibre optic enclosuresGeneric specification
BS EN 62134-1:2009. Fibre optic interconnecting devices and passive components. Fibre optic closuresGeneric specification
BS EN 62135-1:2008. Resistance welding equipmentSafety requirements for design, manufacture and installation
BS EN 62135-2:2008. Resistance welding equipmentElectromagnetic compatibility (EMC) requirements
BS EN 62137:2004. Environmental and endurance testing. Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN
BS EN 62137-1-1:2007. Surface mounting technology. Environmental and endurance test methods for surface mount solder jointPull strength test
BS EN 62137-1-2:2007. Surface mounting technology. Environmental and endurance test methods for surface mount solder jointShear strength test
BS EN 62137-1-3:2009. Surface mounting technology. Environmental and endurance test methods for surface mount solder jointCyclic drop test
BS EN 62137-1-4:2009. Surface mounting technology. Environmental and endurance test methods for surface mount solder jointCyclic bending test
BS EN 62137-1-5:2009. Surface mounting technology. Environmental and endurance test methods for surface mount solder jointsMechanical shear fatigue test
BS EN 62137-3:2012. Electronics assembly technologySelection guidance of environmental and endurance test methods for solder joints
BS EN 62138:2009. Nuclear power plants. Instrumentation and control important for safety. Software aspects for computer-based systems performing category B or C functions
BS EN 62141:2006. Helical-scan digital video cassette recording format using 12,65mm magnetic tape and incorporating MPEG-4 compression. Type D-16 format
BS EN 62148-1:2002. Fibre optic active components and devices. Package and interface standardsGeneral and guidance
BS EN 62148-10:2003. Fibre optic active components and devices. Package and interface standardsSFF MU duplex 20-pin transceivers
BS EN 62148-11:2003. Fibre optic active components and devices. Package and interface standards14-pin modulator-integrated laser diode transmitters
BS EN 62148-11:2009. Fibre optic active components and devices. Package and interface standards14-pin active device modules
BS EN 62148-15:2010. Fibre optic active components and devices. Package and interface standardsDiscrete vertical cavity surface emitting laser packages
BS EN 62148-16:2009. Fibre optic active components and devices. Package and interface standardsTransmitter and receiver components for use with LC connector interface
BS EN 62148-2:2003. Fibre optic active components and devices. Package and interface standardsSFF MT-RJ 10-pin transceivers
BS EN 62148-2:2011. Fibre optic active components and devices. Package and interface standardsSFF 10-pin transceivers
BS EN 62148-3:2003. Fibre optic active components and devices. Package and interface standardsSFF MT-RJ 20-pin transceivers
BS EN 62148-3:2011. Fibre optic active components and devices. Package and interface standardsSFF 20-pin transceivers
BS EN 62148-4:2003. Fibre optic active components and devices. Package and interface standardsPN 1x9 plastic optical fibre transceivers
BS EN 62148-5:2003. Fibre optic active components and devices. Package and interface standardsSC 1x9 fibre optic modules
BS EN 62148-6:2003. Fibre optic active components and devices. Package and interface standardsATM-PON transceivers
BS EN 62148-7:2003. Fibre optic active components and devices. Package and interface standardsSFF LC 10-pin transceivers
BS EN 62148-8:2003. Fibre optic active components and devices. Package and interface standardsSFF LC 20-pin transceivers
BS EN 62148-9:2003. Fibre optic active components and devices. Package and interface standardsSFF MU duplex 10-pin transceivers
BS EN 62149-1:2004. Fibre optic active components and devices. Performance standardsGeneral and guidance
BS EN 62149-1:2012. Fibre optic active components and devices. Performance standardsGeneral and guidance
BS EN 62149-2:2009. Fibre optic active components and devices. Performance standards850 nm discrete vertical cavity surface emitting laser devices
BS EN 62149-3:2004. Fibre optic active components and devices. Performance standards2,5 Gbit/s modulator-integrated laser diode transmitters
BS EN 62149-4:2003. Fibre optic active components and devices. Performance standards1300 nm fibre optic transceivers for Gigabit Ethernet application
BS EN 62149-4:2010. Fibre optic active components and devices. Performance standards1300 nm fibre optic transceivers for Gigabit Ethernet application
BS EN 62149-5:2003. Fibre optic active components and devices. Performance standardsATM-PON transceivers with LD driver and CDR ICs
BS EN 62149-5:2011. Fibre optic active components and devices. Performance standardsATM-PON transceivers with LD driver and CDR ICs
BS EN 62149-6:2003. Fibre optic active components and devices. Performance standards650-nm 250-Mbit/s plastic optical fibre transceivers
BS EN 62149-7:2012. Fibre optic active components and devices. Performance standards1310 nm discrete vertical cavity surface emitting laser devices
BS EN 62150-1:2005. Fibre optic active components and devices. Test and measurement proceduresGeneral and guidance
BS EN 62150-2:2004. Fibre optic active components and devices. Test and measurement proceduresATM-PON transceivers
BS EN 62150-2:2011. Fibre optic active components and devices. Test and measurement proceduresATM-PON transceivers
BS EN 62150-3:2012. Fibre optic active components and devices. Test and measurement proceduresOptical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces
BS EN 62150-4:2010. Fibre optic active components and devices. Test and measurement proceduresRelative intensity noise using a time-domain optical detection system
BS EN 62153-1-1:2004. Metallic communication cables test methodsElectrical. Measurement of the pulse/step return loss in the frequency domain using the inverse discrete fourier transformation (IDFT)
BS EN 62153-4-2:2004. Metallic communication cable test methodsElectromagnetic compatibility. Screening and coupling attenuation. Injection clamp method
BS EN 62153-4-7:2006. Metallic communication cables test methodsElectromagnetic compatibility (EMC). Test method for measuring the transfer impedance and the screening, or the coupling attenuation. Tube in tube method
BS EN 62155:2003. Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
BS EN 62156:2001. Digital video recording with video compression 12,65 mm type D-9 component format 525/60 and 625/50 (digital S)
BS EN 62192:2009. Live working. Insulating ropes
BS EN 62193:2003. Live working. Telescopic sticks and telescopic measuring sticks
BS EN 62194:2005. Method of evaluating the thermal performance of enclosures
BS EN 62196-1:2012+A11:2013. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehiclesGeneral requirements
BS EN 62196-2:2012+A11:2013. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehiclesDimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
BS EN 62197-1:2006. Connectors for electronic equipment. Quality assessment requirementsGeneric specification
BS EN 62199:2004. Bushings for D.C. application
BS EN 62208:2003. Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements
BS EN 62208:2011. Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements
BS EN 62209-1:2006. Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices. Human models, instrumentation, and proceduresProcedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)
BS EN 62209-2:2010. Human exposure to radio frequency fields from hand-held and bodymounted wireless communication devices. Human models, instrumentation, and proceduresProcedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)
BS EN 622-1:1997. Fibreboards. SpecificationsGeneral requirements
BS EN 622-1:2003. Fibreboards. SpecificationsGeneral requirements
BS EN 62211:2004. Inductive components. Reliability management
BS EN 62216:2011. Digital terrestrial television receivers for the DVB-T system
BS EN 62216-1:2002. Digital terrestrial television receivers for the DVB-T systemBaseline receiver specification
BS EN 62217:2006. Polymeric insulators for indoor and outdoor use with a nominal voltage greater than 1000 V. General definitions, test methods and acceptance criteria
BS EN 62217:2013. Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria
BS EN 62219:2002. Overhead electrical conductors. Formed wire, concentric lay, stranded conductors
BS EN 622-2:1997. Fibreboards. SpecificationsRequirements for hardboards
BS EN 622-2:2004. Fibreboards. SpecificationsRequirements for hardboards
BS EN 62220-1:2004. Medical electrical equipment. Characteristics of digital X-ray imaging devicesDetermination of the detective quantum efficiency
BS EN 62220-1-2:2007. Medical electrical equipment. Characteristics of digital X-ray imaging devicesDetermination of the detective quantum efficiency. Detectors used in mammography
BS EN 62220-1-3:2008. Medical electrical equipment. Characteristics of digital X-ray imaging devicesDetermination of the detective quantum efficiency. Detectors used in dynamic imaging
BS EN 62223:2009. Insulators. Glossary of terms and definitions
BS EN 62226-1:2005. Exposure to electric or magnetic fields in the low and intermediate frequency range. Methods for calculating the current density and internal electric field induced in the human bodyGeneral
BS EN 62226-2-1:2005. Exposure to electric or magnetic fields in the low and intermediate frequency range. Methods for calculating the current density and internal electric field induced in the human bodyExposure to magnetic fields
BS EN 62226-3-1:2007. Exposure to electric or magnetic fields in the low and intermediate frequency range. Methods for calculating the current density and internal electric field induced in the human bodyExposure to electric fields. Analytical and 2D numerical models
BS EN 62227:2008+A1:2013. Multimedia home server systems. Digital rights permission code
BS EN 622-3:1997. Fibreboards. SpecificationsRequirements for medium boards
BS EN 622-3:2004. Fibreboards. SpecificationsRequirements for medium boards
BS EN 62230:2007. Electric cables. Spark-test method
BS EN 62231:2007. Composite station post insulators for substations with a.c. voltages greater than 1000 V up to 245 kV. Definitions, test methods and acceptance criteria
BS EN 62233:2008. Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure
BS EN 62237:2005. Live working. Insulating hoses with fittings for use with hydraulic tools and equipment
BS EN 622-4:1997. Fibreboards. SpecificationsRequirements for softboards
BS EN 622-4:2009. Fibreboards. SpecificationsRequirements for softboards
BS EN 62244:2011. Radiation protection instrumentation. Installed radiation monitors for the detection of radioactive and special nuclear materials at national borders
BS EN 62246-1:2002. Reed contacts unitGeneric specification
BS EN 62246-1:2011. Reed switchesGeneric specification
BS EN 62246-1-1:2013. Reed switchesGeneric specification. Quality assessment
BS EN 62246-2:2008. Reed contact unitsHeavy-duty reed switches
BS EN 622-5:1997. Fibreboards. SpecificationsRequirements for dry process boards (MDF)
BS EN 622-5:2006. Fibreboards. SpecificationsRequirements for dry process boards (MDF)
BS EN 622-5:2009. Fibreboards. SpecificationsRequirements for dry process boards (MDF)
BS EN 62252:2004. Maritime navigation and radiocommunication equipment and systems. Radar for craft not in compliance with IMO SOLAS Chapter V. Performance requirements methods of test and required test results
BS EN 62253:2011. Photovoltaic pumping systems. Design qualification and performance measurements
BS EN 62256:2008. Hydraulic turbines, storage pumps and pump-turbines. Rehabilitation and performance improvement
BS EN 62258-1:2005. Semiconductor die productsRequirements for procurement and use
BS EN 62258-1:2010. Semiconductor die productsProcurement and use
BS EN 62258-2:2005. Semiconductor die productsExchange data formats
BS EN 62258-2:2011. Semiconductor die productsExchange data formats
BS EN 62258-5:2006. Semiconductor die productsRequirements for information concerning electrical simulation
BS EN 62258-6:2006. Semiconductor die productsRequirements for information concerning thermal simulation
BS EN 62259:2004. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Nickel-cadmium prismatic secondary single cells with partial gas recombination
BS EN 62261-1:2006. Television metadataMetadata dictionary structure
BS EN 62261-2:2006. Television METADATAData encoding protocol using key-length-value
BS EN 62262:2002. Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
BS EN 62264-1:2008. Enterprise-control system integrationModels and terminology
BS EN 62264-1:2013. Enterprise-control system integrationModels and terminology
BS EN 62264-2:2008. Enterprise-control system integrationObject model attributes
BS EN 62264-2:2013. Enterprise-control system integrationObjects and attributes for enterprise-control system integration
BS EN 62264-3:2007. Enterprise-control system integrationActivity models of manufacturing operations management
BS EN 62264-5:2012. Enterprise system integrationBusiness to manufacturing transactions
BS EN 62267:2009. Railway applications. Automated urban guided transport (AUGT). Safety requirements
BS EN 62270:2004. Hydroelectric power plant automation. Guide for computer-based control
BS EN 62271-1:2008+A1:2011. High-voltage switchgear and controlgearCommon specifications
BS EN 62271-100:2001. High-voltage switchgear and controlgearHigh-voltage alternating-current circuit-breakers
BS EN 62271-100:2009+A1:2012. High-voltage switchgear and controlgear Alternating current circuit-breakers
BS EN 62271-101:2006+A1:2010. High-voltage switchgear and controlgearSynthetic testing
BS EN 62271-101:2013. High-voltage switchgear and controlgearSynthetic testing
BS EN 62271-102:2002+A2:2013. High-voltage switchgear and controlgearAlternating current disconnectors and earthing switches
BS EN 62271-103:2011. High-voltage switchgear and controlgearSwitches for rated voltages above 1 kV up to and including 52 kV
BS EN 62271-104:2009. High-voltage switchgear and controlgearAlternating current switches for rated voltages of 52 kv and above
BS EN 62271-105:2003. High-voltage switchgear and controlgearAlternating current switch-fuse combinations
BS EN 62271-105:2012. High-voltage switchgear and controlgearAlternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV
BS EN 62271-106:2011. High-voltage switchgear and controlgearAlternating current contactors, contactor-based controllers and motor-starters
BS EN 62271-107:2005. High-voltage switchgear and controlgearAlternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV
BS EN 62271-107:2012. High-voltage switchgear and controlgearAlternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV
BS EN 62271-108:2006. High-voltage switchgear and controlgearHigh-voltage alternating current disconnecting circuit-breakers for rated voltages of 72,5 kV and above
BS EN 62271-109:2006. High-voltage switchgear and controlgearAlternating-current series capacitor by-pass switches
BS EN 62271-109:2009+A1:2013. High-voltage switchgear and controlgear Alternating-current series capacitor by-pass switches
BS EN 62271-110:2005. High-voltage switchgear and controlgearInductive load switching
BS EN 62271-110:2009. High-voltage switchgear and controlgearInductive load switching
BS EN 62271-110:2012. High-voltage switchgear and controlgearInductive load switching
BS EN 62271-2:2003. High-voltage switchgear and controlgearSeismic qualification for rated voltages of 72,5 kV and above
BS EN 62271-200:2004. High-voltage switchgear and controlgearAC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
BS EN 62271-200:2012. High-voltage switchgear and controlgearAC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
BS EN 62271-201:2006. High voltage switchgear and controlgearA.C. insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
BS EN 62271-202:2007. High-voltage switchgear and controlgearHigh voltage/low voltage prefabricated substation
BS EN 62271-203:2012. High-voltage switchgear and controlgearGas-insulated metal-enclosed switchgear for rated voltages above 52 kV
BS EN 62271-204:2011. High-voltage switchgear and controlgearRigid gas-insulated transmission lines for rated voltage above 52 kV
BS EN 62271-205:2008. High-voltage switchgear and controlgearCompact switchgear assemblies for rated voltages above 52 kV
BS EN 62271-206:2011. High-voltage switchgear and controlgearVoltage presence indicating systems for rated voltages above 1 kV and up to and including 52 kVkV and up to and including 52 kV
BS EN 62271-207:2007. High-voltage switchgear and controlgearSeismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV
BS EN 62271-207:2012. High-voltage switchgear and controlgearSeismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV
BS EN 62271-209:2007. High-voltage switchgear and controlgearCable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV. Fluid-filled and extruded insulation cables. Fluid-filled and dry-type cable-terminations
BS EN 62271-3:2006. High-voltage switchgear and controlgearDigital interfaces based on IEC 61850
BS EN 62272-1:2003. Digital Radio Mondial (DRM)System specification
BS EN 62272-2:2007. Digital radio mondiale (DRM)Digital radio in the bands below 30 MHz. Methods of measurement for DRM transmitters
BS EN 62273-1:2007. Methods of measurement for radio transmittersPerformance characteristics of terrestrial digital television transmitters
BS EN 62274:2005. Medical electrical equipment. Safety of radiotherapy record and verify systems
BS EN 62275:2009. Cable management systems. Cable ties for electrical installations
BS EN 62276:2005. Single crystal wafers applied for surface acoustic wave (SAW) device applications. Specification and measuring methods
BS EN 62276:2013. Single crystal wafers for surface acoustic wave (SAW) device applications. Specifications and measuring methods
BS EN 62281:2004. Safety of primary and secondary lithium cells and batteries during transport
BS EN 62281:2013. Safety of primary and secondary lithium cells and batteries during transport
BS EN 62282-2:2004. Fuel cell technologiesFuel cell modules
BS EN 62282-2:2012. Fuel cell technologiesFuel cell modules
BS EN 62282-3-1:2007. Fuel cell technologiesStationary fuel cell power systems. Safety
BS EN 62282-3-100:2012. Fuel cell technologiesStationary fuel cell power systems. Safety
BS EN 62282-3-2:2006. Fuel cell technologiesStationary fuel cell power systems. Performance test methods
BS EN 62282-3-200:2012. Fuel cell technologiesStationary fuel cell power systems. Performance test methods
BS EN 62282-3-201:2013. Fuel cell technologiesStationary fuel cell power systems. Performance test methods for small fuel cell power systems
BS EN 62282-3-3:2008. Fuel cell technologiesStationary fuel cell power systems. Installation
BS EN 62282-3-300:2012. Fuel cell technologiesStationary fuel cell power systems. Installation
BS EN 62282-5-1:2007. Fuel cell technologiesPortable fuel cell power systems. Safety
BS EN 62282-5-1:2012. Fuel cell technologiesPortable fuel cell power systems. Safety
BS EN 62282-6-100:2010+A1:2012. Fuel cell technologiesMicro fuel cell power systems. Safety
BS EN 62282-6-200:2008. Fuel cell technologiesMicro fuel cell power systems. Performance test methods
BS EN 62282-6-200:2012. Fuel cell technologiesMicro fuel cell power systems. Performance test methods
BS EN 62282-6-300:2009. Fuel cell technologiesMicro fuel cell power systems. Fuel cartridge interchangeability
BS EN 62282-6-300:2013. Fuel cell technologiesMicro fuel cell power systems. Fuel cartridge interchangeability
BS EN 62287-1:2006. Maritime navigation and radiocommunication equipment and systems. Class B shipborne equipment of the automatic identification system (AIS)Carrier-sense time division multiple access (CSTDMA) techniques
BS EN 62287-1:2011. Maritime navigation and radiocommunication equipment and systems. Class B shipborne equipment of the automatic identification system (AIS)Carrier-sense time division multiple access (CSTDMA) techniques
BS EN 62287-2:2013. Maritime navigation and radiocommunication equipment and systems. Class B shipborne equipment of the automatic identification system (AIS)Self-organising time division multiple access (SOTDMA) techniques
BS EN 62288:2008. Maritime navigation and radiocommunication equipment and systems. Presentation of navigation-related information on shipborne navigational displays. General requirements, methods of testing and required test results
BS EN 62289:2003. Video recording. Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-2 compression. Format D-10
BS EN 62290-1:2006. Railway applications. Urban guided transport management and command/control systemsSystem principles and fundamental concepts
BS EN 62290-2:2011. Railway applications. Urban guided transport management and command/control systemsFunctional requirements specification
BS EN 62295:2009. Multimedia systems. Common communication protocol for inter-connectivity on heterogeneous networks
BS EN 62297-1:2005. Triggering messages for broadcast applicationsFormat
BS EN 62297-2:2005. Triggering messages for broadcast applicationsTransport methods
BS EN 62298-1:2005. Teleweb applicationGeneral description
BS EN 62298-2:2005. Teleweb applicationDelivery methods
BS EN 62298-3:2005. Teleweb applicationSuperteletext profile
BS EN 62298-4:2005. TeleWeb applicationHyperteletext profile
BS EN 62300:2005. Consumer audio/video equipment digital interface with plastic optical fibre
BS EN 62301:2005. Household electrical appliances. Measurement of standby power
BS EN 62304:2006. Medical device software. Software life-cycle processes
BS EN 62305-1:2006. Protection against lightningGeneral principles
BS EN 62305-1:2011. Protection against lightningGeneral principles
BS EN 62305-2:2006. Protection against lightningRisk management
BS EN 62305-2:2012. Protection against lightningRisk management
BS EN 62305-3:2006. Protection against lightningPhysical damage to structures and life hazard
BS EN 62305-3:2011. Protection against lightningPhysical damage to structures and life hazard
BS EN 62305-4:2006. Protection against lightningElectrical and electronic systems within structures
BS EN 62305-4:2011. Protection against lightningElectrical and electronic systems within structures
BS EN 62308:2006. Equipment reliability. Reliability assessment methods
BS EN 62309:2004. Dependability of products containing reused parts. Requriements for functionality and tests
BS EN 623-1:1995. Advanced technical ceramics. Monolithic ceramics. General and textural propertiesDetermination of the presence of defects by dye penetration tests
BS EN 623-1:2006. Advanced technical ceramics. Monolithic ceramics. General and textural propertiesDetermination of the presence of defects by dye penetration
BS EN 62310-1:2005. Static transfer systems (STS)General and safety requirements
BS EN 62310-2:2007. Static transfer systems (STS)Electromagnetic compatibility (EMC) requirements
BS EN 62310-3:2008. Static transfer systems (STS)Method for specifying performance and test requirements
BS EN 62311:2008. Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)
BS EN 62314:2006. Solid-state relays
BS EN 62315-1:2003. DTV profiles for uncompressed digital video interfacesGeneral
BS EN 62317-1:2007. Ferrite cores. DimensionsGeneral specification
BS EN 62317-13:2008. Ferrite cores. DimensionsPQ-cores for use in power supply applications
BS EN 62317-14:2008. Ferrite cores. DimensionsEFD-cores for use in power supply applications
BS EN 62317-2:2010. Ferrite cores. DimensionsPot-cores for use in telecommunications, power supply, and filter applications
BS EN 62317-4:2005. Ferrite cores. DimensionsRM-cores and associated parts
BS EN 62317-7:2005. Ferrite cores. DimensionsEER-cores
BS EN 62317-8:2006. Ferrite cores. DimensionsE-cores
BS EN 62317-9:2006. Ferrite cores. DimensionsPlanar cores
BS EN 62319-1:2005. Polymeric thermistors. Directly heated positive step function temperature coefficientGeneric specification
BS EN 62319-1-1:2005. Polymeric thermistors. Directly heated positive step function temperature coefficientBlank detail specification. Current limiting application
BS EN 623-2:1993. Advanced technical ceramics. Monolithic ceramics. General and textural properties.Determination of density and porosity
BS EN 62320-1:2007+A1:2009. Maritime navigation and radiocommunication equipment and systems. Automatic identification systems (AIS)AIS base stations. Minimum operational and performance requirements, methods of testing and required test results
BS EN 62320-2:2008. Maritime navigation and radiocommunication equipment and systems. Automatic identification system (AIS)AIS AtoN Stations. Operational and performance requirements, methods of testing and required test results
BS EN 62321:2009. Electrotechnical products. Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers)
BS EN 62321-1:2013. Determination of certain substances in electrotechnical productsIntroduction and overview
BS EN 62323:2005. Dimensions of half pot-cores made of ferrite for inductive proximity switches
BS EN 62325-450:2013. Framework for energy market communicationsProfile and context modelling rules
BS EN 62326-1:1997, IEC 62326-1:1996,QC 230000:1996. Printed boardsGeneric specification
BS EN 62326-1:2002. Printed boardsGeneric specification
BS EN 62326-4:1997, IEC 62326-4:1996,QC 230500:1996. Printed boardsRigid multilayer printed boards with interlayer connections. Sectional specification
BS EN 62326-4-1:1997, IEC 62326-4-1:1996,QC 230401:1996. Printed boards. Rigid multilayer printed boards with interlayer connections. Sectional specificationCapability detail specification. Performance levels, A, B and C
BS EN 62327:2011. Radiation protection instrumentation. Hand-held instruments for the detection and identification of radionuclides and for the indication of ambient dose equivalent rate from photon radiation
BS EN 62328-1:2005. Multimedia home server systems. Interchangeable volume/file structure adaptation for broadcasting receiversGeneral description and architecture
BS EN 62328-2:2005. Multimedia home server systems. Interchangeable volume/file structure adaptation for broadcasting receiversGeneral recording structure
BS EN 62329-1:2006. Heat shrinkable moulded shapesDefinitions and general requirements
BS EN 62329-2:2006. Heat shrinkable moulded shapes Methods of test
BS EN 62329-3-100:2010. Heat-shrinkable moulded shapesSpecification requirements for shape dimensions, material requirements and compatibility performance. Heat-shrinkable moulded shape dimensions
BS EN 62329-3-101:2010. Heat-shrinkable moulded shapesSpecification requirements for shape dimensions, material requirements and compatibility performance. Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements and system performance
BS EN 62329-3-102:2010. Heat-shrinkable moulded shapesSpecification requirements for shape dimensions, material requirements and compatibility performance. Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance
BS EN 623-3:2001. Advanced technical ceramics. Monolithic ceramics. General and textural propertiesDetermination of grain size and size distribution (characterized by the linear intercept method)
BS EN 62333-1:2006. Noise suppression sheet for digital devices and equipmentDefinitions and general properties
BS EN 62333-2:2006. Noise suppression sheet for digital devices and equipmentMeasuring methods
BS EN 62333-3:2010. Noise suppression sheet for digital devices and equipmentCharacterization of parameters of noise suppression sheet
BS EN 62337:2007. Commissioning of electrical, instrumentation and control systems in the process industry. Specific phases and milestones
BS EN 62337:2012. Commissioning of electrical, instrumentation and control systems in the process industry. Specific phases and milestones
BS EN 62339-1:2007. Modular component interfaces for surface-mount fluid distribution componentsElastomeric seals
BS EN 623-4:2004. Advanced technical ceramics. Monolithic ceramics. General and textural propertiesDetermination of surface roughness
BS EN 62340:2010. Nuclear power plants. Instrumentation and control systems important to safety. Requirements for coping with common cause failure (CCF)
BS EN 62341-1-1:2009. Organic light emitting diode (OLED) displaysGeneric specifications
BS EN 62341-1-2:2009. Organic light emitting diode displaysTerminology and letter symbols
BS EN 62341-5:2009. Organic light emitting diode (OLED) displaysEnvironmental testing methods
BS EN 62341-5-2:2013. Organic light emitting diode (OLED) displaysMechanical endurance testing methods
BS EN 62341-5-3:2013. Organic Light Emitting Diode (OLED) displaysMeasuring methods of image sticking and lifetime
BS EN 62341-6-1:2011. Organic light emitting diode (OLED) displaysMeasuring methods of optical and electro-optical parameters
BS EN 62341-6-2:2012. Organic light emitting diode (OLED) displaysMeasuring methods of visual quality and ambient performance
BS EN 62341-6-3:2012. Organic light emitting diode (OLED) displaysMeasuring methods of image quality
BS EN 62343:2013. Dynamic modules. General and guidance
BS EN 62343-1-2:2008. Dynamic modulesPerformance standards. Dynamic chromatic dispersion compensator with pigtails for use in controlled environments (Category C)
BS EN 62343-1-3:2006. Dynamic modulesPerformance standards
BS EN 62343-1-3:2013. Dynamic modulesPerformance standards. Dynamic gain tilt equalizer (non-connectorized)
BS EN 62343-2:2011. Dynamic modulesReliability qualification
BS EN 62343-3-1:2010. Dynamic modulesPerformance specification templates. Dynamic channel equalizers
BS EN 62343-5-1:2009. Dynamic modules. Test methodsDynamic gain tilt equalizer. Response time measurement
BS EN 62345:2005. ID format for 50 mm magneto-optical disc system
BS EN 62347:2007. Guidance on system dependability specifications
BS EN 623-5:2009. Advanced technical ceramics. Monolithic ceramics. General and textural propertiesDetermination of phase volume fraction by evaluation of micrographs
BS EN 62353:2008. Medical electrical equipment. Recurrent test and test after repair of medical electrical equipment
BS EN 62356-1:2004. Video recording. 12,65 mm TYPE D-11 formatTape recording
BS EN 62356-2:2004. Video recording. 12,65 mm type D-11 formatPicture compression and data stream
BS EN 62356-3:2004. Video recording. 12,65 mm type D-11 formatData mapping over SDTI
BS EN 62358:2013. Ferrite cores. Standard inductance factor for gapped cores and its tolerance
BS EN 62359:2005. Ultrasonics. Field characterization. Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields
BS EN 62359:2011. Ultrasonics. Field characterization. Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields
BS EN 62363:2011. Radiation protection instrumentation. Portable photon contamination meters and monitors
BS EN 62364:2013. Hydraulic machines. Guide for dealing with hydro-abrasive erosion in Kaplan, Francis, and Pelton turbines
BS EN 62365:2005. Digital audio. Digital input-output interfacing. Transmission of digital audio over asynchronous transfer mode (ATM) networks
BS EN 62365:2009. Digital audio. Digital input-output interfacing. Transmission of digital audio over asynchronous transfer mode (ATM) networks
BS EN 62366:2008. Medical devices. Application of usability engineering to medical devices
BS EN 62369-1:2009. Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHzFields produced by devices used for electronic article surveillance, radio frequency identification and similar systems
BS EN 62373:2006. Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET)
BS EN 62374:2007. Semiconductor devices. Time dependent dielectric breakdown (TDDB) test for gate dielectric films
BS EN 62374-1:2010. Semiconductor devicesTime-dependent dielectric breakdown (TDDB) test for inter-metal layers
BS EN 62375:2004. Video systems (625/50 progressive). Video and accompanied data using the vertical blanking interval. Analogue interface
BS EN 62376:2011. Maritime navigation and radiocommunication equipment and systems. Electronic chart system (ECS). Operational and performance requirements, methods of testing and required test results
BS EN 62379-1:2007. Common control interface for networked digital audio and video productsGeneral
BS EN 62379-2:2009. Common control interface for networked digital audio and video productsAudio
BS EN 62381:2007. Automation systems in the process industry. Factory acceptance test (FAT), site acceptance test (SAT), and site integration test (SIT)
BS EN 62381:2012. Automation systems in the process industry. Factory acceptance test (FAT), site acceptance test (SAT) and site integration test (SIT)
BS EN 62382:2007. Electrical and instrumentation loop check
BS EN 62382:2013. Control systems in the process industry. Electrical and instrumentation loop check
BS EN 62384:2006+A1:2009. DC or AC supplied electronic control gear for LED modules. Performance requirements
BS EN 62386-101:2009. Digital addressable lighting interfaceGeneral requirements. System
BS EN 62386-102:2009. Digital addressable lighting interfaceGeneral requirements. Control gear
BS EN 62386-201:2009. Digital addressable lighting interfaceParticular requirements for control gear. Fluorescent lamps (device type 0)
BS EN 62386-202:2009. Digital addressable lighting interfaceParticular requirements for control gear. Self-contained emergency lighting (device type 1)
BS EN 62386-203:2009. Digital addressable lighting interfaceParticular requirements for control gear. Discharge lamps (excluding fluorescent lamps) (device type 2)
BS EN 62386-204:2009. Digital addressable lighting interfaceParticular requirements for control gear. Low voltage halogen lamps (device type 3)
BS EN 62386-205:2009. Digital addressable lighting interfaceParticular requirements for control gear. Supply voltage controller for incandescent lamps (device type 4)
BS EN 62386-206:2009. Digital addressable lighting interfaceParticular requirements for control gear. Conversion from digital signal into d.c. voltage (device type 5)
BS EN 62386-207:2009. Digital addressable lighting interfaceParticular requirements for control gear. LED modules (device type 6)
BS EN 62386-208:2009. Digital addressable lighting interfaceParticular requirements for control gear. Switching function (device type 7)
BS EN 62386-209:2011. Digital addressable lighting interfaceParticular requirements for control gear. Colour control (device type 8)
BS EN 62386-210:2011. Digital addressable lighting interfaceParticular requirements for control gear. Sequencer (device type 9)
BS EN 62387-1:2012. Radiation protection instrumentation. Passive integrating dosimetry systems for environmental and personal monitoringGeneral characteristics and performance requirements
BS EN 62388:2008. Maritime navigation and radiocommunication equipment and systems. Shipborne radar. Performance requirements, methods of testing and required test results
BS EN 62389:2006. Methods of measurement for DVD players
BS EN 62391-1:2006. Fixed electric double-layer capacitors for use in electronic equipmentGeneric specification
BS EN 62391-2:2006. Fixed electric double-layer capacitors for use in electronic equipmentSectional specification. Electric double-layer capacitors for power application
BS EN 62391-2-1:2006. Fixed electric double-layer capacitors for use in electronic equipmentBlank detail specification. Electric double-layer capacitors for power application. Assessment level EZ
BS EN 62395-1:2006. Electrical resistance trace heating systems for industrial and commercial applicationsGeneral and testing requirements
BS EN 624:2000. Specification for dedicated LPG appliances. Room sealed LPG space heating equipment for installation in vehicles and boats
BS EN 624:2011. Specification for dedicated LPG appliances. Room sealed LPG space heating equipment for installation in vehicles and boats
BS EN 62402:2007. Obsolescence management. Application guide
BS EN 62403:2006. High density recording format on CD-R/RW disc system. HD-BURN format
BS EN 62415:2010. Semiconductor devices. Constant current electromigration test
BS EN 62416:2010. Semiconductor devices. Hot carrier test on MOS transistors
BS EN 62417:2010. Semiconductor devices. Mobile ion tests for metal-oxide semiconductor field effect transistors (MOSFETs)
BS EN 62418:2010. Semiconductor devices. Metallization stress void test
BS EN 62419:2009. Control technology. Rules for the designation of measuring instruments
BS EN 62420:2008. Concentric lay stranded overhead electrical conductors containing one or more gap(s)
BS EN 62421:2007. Electronics assembly technology. Electronic modules
BS EN 62423:2012. Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses
BS EN 62424:2009. Representation of process control engineering. Requests in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools
BS EN 62428:2008. Electric power engineering. Modal components in three- phase a.c. systems. Quantities and transformations
BS EN 62429:2008. Reliability growth. Stress testing for early failures in unique complex systems
BS EN 62430:2009. Environmentally conscious design for electrical and electronic products
BS EN 62431:2008. Reflectivity of electromagnetic wave absorbers in millimetre wave frequency. Measurement methods
BS EN 62433-2:2010. EMC IC modellingModels of integrated circuits for EMI behavioural simulation. Conducted emissions modelling (ICEM-CE)
BS EN 62439:2008. High availability automation networks
BS EN 62439-1:2010+A1:2012. Industrial communication networks. High availability automation networksGeneral concepts and calculation methods
BS EN 62439-2:2010. Industrial communication networks. High availability automation networksMedia redundancy protocol (MRP)
BS EN 62439-3:2010. Industrial communication networks. High availability automation networksParallel redundancy protocol (PRP) and high availability seamless redundancy (HSR)
BS EN 62439-3:2012. Industrial communication networks. High availability automation networksParallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR)
BS EN 62439-4:2010+A1:2012. Industrial communication networks. High availability automation networksCross-network Redundancy Protocol (CRP)
BS EN 62439-5:2010. Industrial communication networks. High availability automation networksBeacon redundancy protocol (BRP)
BS EN 62439-6:2010. Industrial communication networks. High availability automation networksDistributed redundancy protocol (DRP)
BS EN 62439-7:2012. Industrial communication networks. High availability automation networksRing-based Redundancy Protocol (RRP)
BS EN 62442-1:2011. Energy performance of lamp controlgearControlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
BS EN 62446:2009. Grid connected photovoltaic systems. Minimum requirements for system documentation, commissioning tests and inspection
BS EN 62448:2009. Multimedia systems and equipment. Multimedia E-publishing and E-books. Generic format for E-publishing
BS EN 62453-1:2009. Field device tool (FDT) interface specificationOverview and guidance
BS EN 62453-2:2009. Field device tool (FDT) interface specificationConcepts and detailed description
BS EN 62453-301:2009. Field device tool (FDT) interface specificationCommunication profile integration. IEC 61784 CPF 1
BS EN 62453-302:2009. Field device tool (FDT) interface specificationCommunication profile integration. IEC 61784 CPF 2
BS EN 62453-303-1:2009. Field device tool (FDT) interface specificationCommunication profile integration. IEC 61784 CP 3/1 and CP 3/2
BS EN 62453-303-2:2009. Field device tool (FDT) interface specificationCommunication profile integration. IEC 61784 CP 3/4, CP 3/5 and CP 3/6
BS EN 62453-306:2009. Field device tool (FDT) interface specificationCommunication profile integration. IEC 61784 CPF 6
BS EN 62453-309:2009. Field device tool (FDT) interface specificationCommunication profile integration. IEC 61784 CPF 9
BS EN 62453-315:2009. Field device tool (FDT) interface specificationCommunication profile integration. IEC 61784 CPF 15
BS EN 62455:2011. Internet protocol (IP) and transport stream (TS) based service access
BS EN 62457:2008. Multimedia home networks. Home network communication protocol over IP for multimedia household appliances
BS EN 62458:2011. Sound system equipment. Electroacoustic transducers. Measurement of large signal parameters
BS EN 62459:2011. Sound system equipment. Electroacoustic transducers. Measurement of suspension parts
BS EN 62460:2008. Temperature. Electromotive force (EMF) tables for pure-element thermocouple combinations
BS EN 62464-1:2007. Magnetic resonance equipment for medical imagingDetermination of essential image quality parameters
BS EN 62464-2:2011. Magnetic resonance equipment for medical imagingClassification criteria for pulse sequences
BS EN 62471:2008. Photobiological safety of lamps and lamp systems
BS EN 62474:2012. Material declaration for products of and for the electrotechnical industry
BS EN 62475:2010. High-current test techniques. Definitions and requirements for test currents and measuring systems
BS EN 62477-1:2012. Safety requirements for power electronic converter systems and equipmentGeneral
BS EN 62479:2010. Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
BS EN 62480:2009. Multimedia home network. Network interfaces for network adapter
BS EN 62481-3:2011. Digital living network alliance (DLNA) home networked device interoperability guidelinesLink protection
BS EN 62488-1:2013. Power line communication systems for power utility applicationsPlanning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids
BS EN 62489-1:2010. Electroacoustics. Audio-frequency induction loop systems for assisted hearingMethods of measuring and specifying the performance of system components
BS EN 62489-2:2011. Electroacoustics. Audio-frequency induction loop systems for assisted hearingMethods of calculating and measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines on limits for human exposure
BS EN 62490-1:2010. ESL measuring methodCapacitors with lead terminal for use in electronic equipment
BS EN 62490-2:2010. ESL measuring methodSurface mount capacitors for use in electronic equipment
BS EN 62491:2008. Industrial systems, installations and equipment and industrial products. Labelling of cables and cores
BS EN 62493:2010. Assessment of lighting equipment related to human exposure to electromagnetic fields
BS EN 62494-1:2008. Medical electrical equipment. Exposure index of digital X-ray imaging systemsDefinitions and requirements for general radiography
BS EN 62496-1:2009. Optical circuit boardsGeneral
BS EN 62496-2-1:2011. Optical circuit boardsMeasurements. Optical attenuation and isolation
BS EN 62496-2-2:2011. Optical circuit boardsMeasurements. Dimensions of optical circuit boards
BS EN 62496-2-4:2013. Optical circuit boards. Basic test and measurement proceduresOptical transmission test for optical circuit boards without input/output fibres
BS EN 62496-3:2011. Optical circuit boardsPerformance standards. General and guidance
BS EN 62496-3-1:2010. Optical circuit boards. Performance standardFlexible optical circuit boards using unconnectorized optical glass fibres
BS EN 62496-4:2011. Optical circuit boardsInterface standards. General and guidance
BS EN 625:1996. Gas-fired central heating boilers. Specific requirements for the domestic hot water operation of combination boilers of nominal heat input not exceeding 70 kW
BS EN 62501:2009. Voltage sourced converter (VSC) valves for high-voltage direct current (H VDC) power transmission. Electrical testing
BS EN 62502:2011. Analysis techniques for dependability. Event tree analysis (ETA)
BS EN 62503:2008. Multimedia quality. Method of assessment of synchronization of audio and video
BS EN 62506:2013. Methods for product accelerated testing
BS EN 62507-1:2011. Identification systems enabling unambiguous information interchange. RequirementsPrinciples and methods
BS EN 62508:2010. Guidance on human aspects of dependability
BS EN 62509:2011. Battery charge controllers for photovoltaic systems. Performance and functioning
BS EN 62514:2010. Multimedia gateway in home networks. Guidelines
BS EN 62516-1:2009. Terrestrial digital multimedia broadcasting (T-DMB) receiversBasic requirement
BS EN 62516-2:2011. Terrestrial digital multimedia broadcasting (T-DMB) receiversInteractive data services using BIFS
BS EN 62516-3:2013. Terrestrial digital multimedia broadcasting (T-DMB) receiversCommon API
BS EN 62520:2011. Railway applications. Electric traction. Short-primary type linear induction motors (LIM) fed by power converters
BS EN 62524:2011. Multimedia systems and equipment. Multimedia e-publishing and e-books. Reader's format for e-publishing
BS EN 62532:2011. Fluorescent induction lamps. Safety specifications
BS EN 62535:2009. Insulating liquids. Test method for detection of potentially corrosive sulphur in used and unused insulating oil
BS EN 62537:2010. Interface for loudspeakers with digital input signals based on IEC 60958
BS EN 62541-10:2012. OPC unified architecturePrograms
BS EN 62541-3:2010. OPC unified architectureAddress space model
BS EN 62541-4:2011. OPC unified architectureServices
BS EN 62541-5:2011. OPC unified architectureInformation model
BS EN 62541-6:2011. OPC unified architectureMappings
BS EN 62541-7:2012. OPC unified architectureProfiles
BS EN 62541-8:2011. OPC unified architectureData Access
BS EN 62541-9:2012. OPC unified architectureAlarms and conditions
BS EN 62542:2013. Environmental standardization for electrical and electronic products and systems. Glossary of terms
BS EN 62546:2009. High Definiton (HD) recording link guidelines
BS EN 62549:2011. Articulated systems and flexible systems for cable guiding
BS EN 62551:2012. Analysis techniques for dependability. Petri net techniques
BS EN 62552:2013. Household refrigerating appliances. Characteristics and test methods
BS EN 62553:2013. Methods of measurement for digital network. Performance characteristics of terrestrial digital multimedia transmission network
BS EN 62554:2011. Sample preparation for measurement of mercury level in fluorescent lamps
BS EN 62560:2012. Self-ballasted LED-lamps for general lighting services by voltage $0G 50 V. Safety specifications
BS EN 62561-1:2012. Lightning Protection System Components (LPSC)Requirements for connection components
BS EN 62561-2:2012. Lightning Protection System Components (LPSC)Requirements for conductors and earth electrodes
BS EN 62561-3:2012. Lightning Protection System Components (LPSC)Requirements for isolating spark gaps
BS EN 62561-4:2011. Lightning protection system components (LPSC)Requirements for conductor fasteners
BS EN 62561-5:2011. Lightning protection system components (LPSC)Requirements for earth electrode inspection housings and earth electrode seals
BS EN 62561-6:2011. Lightning protection system components (LPSC)Requirements for lightning strike counters (LSC)
BS EN 62561-7:2012. Lightning Protection System Components (LPSC)Requirements for earthing enhancing compounds
BS EN 62562:2011. Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
BS EN 62563-1:2010. Medical electrical equipment. Medical image display systemsEvaluation methods
BS EN 62572-3:2012. Fibre optic active components and devices. Reliability standardsLaser modules used for telecommunication
BS EN 62574:2011. Audio, video and multimedia systems. General channel assignment of multichannel audio
BS EN 62575-2:2012. Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed qualityGuidelines for the use
BS EN 62576:2010. Electric double-layer capacitors for use in hybrid electric vehicles. Test methods for electrical characteristics
BS EN 62585:2012. Electroacoustics. Methods to determine corrections to obtain the free-field response of a sound level meter
BS EN 62591:2010. Industrial communication networks. Wireless communication network and communication profiles. WirelessHART™
BS EN 62595-1-1:2013. LCD backlight unitGeneric specification
BS EN 62595-1-2:2012. LCD backlight unitTerminology and letter symbols
BS EN 62595-2:2013. LCD backlight unitElectro-optical measurement methods of LED backlight unit
BS EN 62598:2013. Nuclear instrumentation. Constructional requirements and classification of radiometric gauges
BS EN 62604-2:2012. Surface Acoustic Wave (SAW) and Bulk Acoustic Wave (BAW) duplexers of assessed qualityGuidelines for the use
BS EN 62605:2011. Multimedia systems and equipment. Multimedia e-publishing and e-books. Interchange format for e-dictionaries
BS EN 626-1:1994+A1:2008. Safety of machinery. Reduction of risks to health from Hazardous substances emitted by machineryPrinciples and specifications for machinery manufacturers
BS EN 62612:2013. Self-ballasted LED lamps for general lighting services with supply voltages $0G50 V. Performance requirements
BS EN 62614:2010. Fibre optics. Launch condition requirements for measuring multimode attenuation
BS EN 62616:2010. Maritime navigation and radiocommunication equipment and systems. Bridge navigational watch alarm system (BNWAS)
BS EN 626-2:1996+A1:2008. Safety of machinery. Reduction of risk to health from hazardous substances emitted by machineryMethodology leading to verification procedures
BS EN 62623:2013. Desktop and notebook computers. Measurement of energy consumption
BS EN 62628:2012. Guidance on software aspects of dependability
BS EN 62629-1-2:2013. 3D Display devicesGeneric. Terminology and letter symbols
BS EN 62629-22-1:2013. 3D display devicesMeasuring methods for autostereoscopic displays. Optical
BS EN 62631-1:2011. Dielectric and resistive properties of solid insulating materialsGeneral
BS EN 62634:2011. Radio data system (RDS). Receiver products and characteristics. Methods of measurement
BS EN 62637-1:2011. Battery charging interface for small handheld multimedia devices2 mm barrel interface
BS EN 62637-2:2011. Battery charging interface for small handheld multimedia devices2 mm barrel type interface conformance testing
BS EN 62639:2012. Fluorescent induction lamps. Performance specification
BS EN 62660-1:2011. Secondary lithium-ion cells for the propulsion of electric road vehiclesPerformance testing
BS EN 62660-2:2011. Secondary lithium-ion cells for the propulsion of electric road vehiclesReliability and abuse testing
BS EN 62665:2012. Multimedia systems and equipment. Multimedia e-publishing and e-book technologies. Texture map for auditory presentation of printed texts
BS EN 62674-1:2013. High frequency inductive componentsFixed surface mount inductors for use in electronic and telecommunication equipment
BS EN 62683:2013. Low-voltage switchgear and controlgear. Product data and properties for information exchange
BS EN 62684:2010. Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones
BS EN 62693:2013. Industrial electroheating installations. Test methods for infrared electroheating installations
BS EN 62697-1:2012. Test methods for quantitative determination of corrosive sulphur compounds in unused and used insulating liquidsTest method for quantitative determination of dibenzyldisulfide (DBDS)
BS EN 62698:2013. Multimedia home server systems. Rights information interoperability for IPTV
BS EN 627:1996. Specification for data logging and monitoring of lifts, escalators and passenger conveyors
BS EN 62716:2013. Photovoltaic (PV) modules. Ammonia corrosion testing
BS EN 62729:2012. Maritime navigation and radiocommunication equipment and systems. Shipborne equipment for long-range identification and tracking (LRIT). Performance requirements
BS EN 62731:2013. Text-to-speech for television. General requirements
BS EN 62739-1:2013. Test method for erosion of wave soldering equipment using molten lead-free solder alloyErosion test method for metal materials without surface processing
BS EN 629-1:1996. Transportable gas cylinders. 25E taper thread for connection of valves to gas cylindersSpecification
BS EN 629-2:1996. Transportable gas cylinders. 25E taper thread for connection of valves to gas cylindersGauge inspection
BS EN 631-1:1993. Materials and articles in contact with foodstuffs. Catering containersSpecification for dimensions of containers
BS EN 631-2:1995. Materials and articles in contact with foodstuffs. Catering containersDimensions of accessories and supports
BS EN 631-2:1999. Materials and articles in contact with foodstuffs. Catering containersDimensions of accessories and supports
BS EN 632:1996. Agricultural machinery. Combine harvesters and forage harvesters. Safety
BS EN 633:1994. Cement-bonded particleboards. Definition and classification
BS EN 634-1:1995. Cement-bonded particle boards. SpecificationGeneral requirements
BS EN 634-2:1997. Cement-bonded particle boards. SpecificationRequirements for OPC bonded particleboards for use in dry, humid and exterior conditions
BS EN 634-2:2007. Cement-bonded particleboards. SpecificationsRequirements for OPC bonded particleboards for use in dry, humid and external conditions
BS EN 635-1:1995. Plywood. Classification by surface appearanceGeneral
BS EN 635-2:1995. Plywood. Classification by surface appearanceHardwood
BS EN 635-3:1995. Plywood. Classification by surface appearanceSoftwood
BS EN 635-5:1999. Plywood. Classification by surface appearanceMethods for measuring and expressing characteristics and defects
BS EN 636:2003. Plywood. Specifications
BS EN 636:2012. Plywood. Specifications
BS EN 636-1:1997. Plywood. Specifications.Requirements for plywood for use in dry conditions
BS EN 636-2:1997. Plywood. Specifications.Requirements for plywood for use in humid conditions
BS EN 636-3:1997. Plywood. Specifications.Requirements for plywood for use in exterior conditions
BS EN 637:1995, BS 2782-12:Method 1205A:1995. Plastics piping systems. Glass-reinforced plastics components. Determination of the amounts of constituents using the gravimetric method
BS EN 638:1995. Plastics piping and ducting systems. Thermoplastics pipes. Determination of tensile properties
BS EN 639:1995. Common requirements for concrete pressure pipes including joints and fittings
BS EN 640:1995. Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings
BS EN 641:1995. Reinforced concrete pressure pipes, cylinder type, including joints and fittings
BS EN 642:1995. Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes
BS EN 643:1994. List of European standard qualities of waste paper
BS EN 643:2002. Paper and board. European list of standard grades of recovered paper and board
BS EN 644:1994. Paper. Untrimmed sizes. Primary range and supplementary range designation and tolerances. Expression of direction of manufacture
BS EN 644:1999. Paper. Untrimmed sizes. Primary range and supplementary range designation and tolerances, expression of direction of manufacture
BS EN 645:1994. Paper and board intended to come into contact with foodstuffs. Preparation of a cold water extract
BS EN 646:1994. Paper and board intended to come into contact with foodstuffs. Determination of colour fastness of dyed paper and board
BS EN 646:2001. Paper and board intended to come into contact with foodstuffs. Determination of colour fastness of dyed paper and board
BS EN 646:2006. Paper and board intended to come into contact with foodstuffs. Determination of colour fastness of dyed paper and board
BS EN 647:1994. Paper and board intended to come into contact with foodstuffs. Preparation of a hot water extract
BS EN 648:1994. Paper and board intended to come into contact with foodstuffs. Determination of the fastness of fluorescent whitened paper and board
BS EN 648:2003. Paper and board intended to come into contact with foodstuffs. Determination of the fastness of fluorescent whitened paper and board
BS EN 648:2006. Paper and board intended to come into contact with foodstuffs. Determination of the fastness of fluorescent whitened paper and board
BS EN 649:1997. Resilient floor coverings. Homogeneous and heterogeneous polyvinyl chloride floor coverings. Specification
BS EN 649:2011. Resilient floor coverings. Homogenous and heterogenous polyvinyl chloride floor coverings. Specification
BS EN 650:1997. Resilient floor coverings. Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on polyester felt with polyvinyl chloride backing. Specification
BS EN 650:2012. Resilient floor coverings. Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with a polyvinyl chloride backing. Specification
BS EN 651:1997. Resilient floor coverings. Polyvinyl chloride floor coverings with foam layer. Specification
BS EN 651:2011. Resilient floor coverings. Polyvinyl chloride floor coverings with foam layer. Specification
BS EN 652:1997. Resilient floor coverings. Polyvinyl chloride floor coverings with cork-based backing. Specification
BS EN 652:2011. Resilient floor coverings. Polyvinyl chloride floor coverings with cork-based backing. Specification
BS EN 653:1997. Resilient floor coverings. Expanded (cushioned) polyvinyl chloride floor coverings. Specification
BS EN 653:2011. Resilient floor coverings. Expanded (cushioned) polyvinyl chloride floor coverings. Specification
BS EN 654:1997. Resilient floor coverings. Semi-flexible polyvinyl chloride tiles. Specification
BS EN 654:2011. Resilient floor coverings. Semi-flexible polyvinyl chloride tiles. Specification
BS EN 655:1997. Resilient floor coverings. Tiles of agglomerated composition cork with polyvinyl chloride wear layer. Specification
BS EN 655:2011. Resilient floor coverings. Tiles of agglomerated composition cork with polyvinyl chloride wear layer. Specification
BS EN 656:2000. Gas-fired central heating boilers. Type B boilers of nominal heat input exceeding 70 kW, but not exceeding 300 kW
BS EN 657:1994. Thermal spraying. Terminology, classification
BS EN 657:2005. Thermal spraying. Terminology, classification
BS EN 658-1:1998. Advanced technical ceramics. Mechanical properties of ceramic composites at room temperatureDetermination of tensile strength
BS EN 658-2:2002. Advanced technical ceramics. Mechanical properties of ceramic composites at room temperatureDetermination of compression properties
BS EN 658-3:2002. Advanced technical ceramics. Mechanical properties of ceramic composites at room temperatureDetermination of flexural strength
BS EN 658-4:2003. Advanced technical ceramics. Mechanical properties of ceramic composites at room temperatureDetermination of interlaminar shear strength by compression loading of notched test specimens
BS EN 658-5:2002. Advanced technical ceramics. Mechanical properties of ceramic composites at room temperatureDetermination of interlaminar shear strength by short span bend test (three points)
BS EN 659:1996. Protective gloves for firefighters
BS EN 659:2003+A1:2008. Protective gloves for firefighters
BS EN 660-1:1999. Resilient floor coverings. Determination of wear resistanceStuttgart test
BS EN 660-2:1999. Resilient floor coverings. Determination of wear resistanceFrick-Taber test
BS EN 661:1995. Resilient floor coverings. Determination of the spreading of water
BS EN 662:1995. Resilient floor coverings. Determination of curling on exposure to moisture
BS EN 663:1995. Resilient floor coverings. Determination of conventional pattern depths
BS EN 664:1995. Resilient floor coverings. Determination of volatile loss
BS EN 665:1995. Resilient floor coverings. Determination of exudation of plasticizers
BS EN 666:1995. Resilient floor coverings. Determination of gelling
BS EN 669:1998. Resilient floor coverings. Determination of dimensional stability of linoleum tiles caused by changes in atmospheric humidity
BS EN 671-1:1995. Fixed fire fighting systems. Hose systemsHose reels with semi-rigid hose
BS EN 671-1:2001. Fixed fire fighting systems. Hose systemsHose reels with semi-rigid hose
BS EN 671-1:2012. Fixed firefighting systems. Hose systemsHose reels with semi-rigid hose
BS EN 671-2:1995. Fixed fire fighting systems. Hose systemsHose systems with lay-flat hose
BS EN 671-2:2001. Fixed fire fighting systems. Hose systemsHose systems with lay-flat hose
BS EN 671-2:2012. Fixed firefighting systems. Hose systemsHose systems with lay-flat hose
BS EN 671-3:2000. Fixed fire fighting systems. Hose systemsMaintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose
BS EN 671-3:2009. Fixed firefighting systems. Hose systemsMaintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose
BS EN 672:1997. Resilient floor coverings. Determination of apparent density of agglomerated cork
BS EN 673:1998. Glass in building. Determination of thermal transmittance (U value). Calculation method
BS EN 673:2011. Glass in building. Determination of thermal transmittance (U value). Calculation method
BS EN 674:1998. Glass in building. Determination of thermal transmittance (U value). Guarded hot plate method
BS EN 674:2011. Glass in building. Determination of thermal transmittance (U value). Guarded hot plate method
BS EN 675:1998. Glass in building. Determination of thermal transmittance (U value). Heat flow meter method
BS EN 675:2011. Glass in building. Determination of thermal transmittance (U value). Heat flow meter method
BS EN 676:1997. Automatic forced draught burners for gaseous fuels
BS EN 676:2003+A2:2008. Automatic forced draught burners for gaseous fuels
BS EN 677:1998. Gas-fired central heating boilers. Specific requirements for condensing boilers with a nominal heat input not exceeding 70 kW
BS EN 678:1994. Determination of the dry density of autoclaved aerated concrete
BS EN 679:1994. Determination of the compressive strength of autoclaved aerated concrete
BS EN 679:2005. Determination of the compressive strength of autoclaved aerated concrete
BS EN 680:1994. Determination of the drying shrinkage of autoclaved aerated concrete
BS EN 680:2005. Determination of the drying shrinkage of autoclaved aerated concrete
BS EN 681-1:1996. Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applicationsVulcanized rubber
BS EN 681-2:2000. Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applicationsThermoplastic elastomers
BS EN 681-3:2000. Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications water and drainage applicationsVulcanized rubber
BS EN 681-4:2000. Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applicationsCast polyurethane sealing elements
BS EN 682:2002. Elastomeric seals. Materials requirements for seals used in pipes and fi ttings carrying gas and hydrocarbon fluids
BS EN 683-1:1996. Aluminium and aluminium alloys. FinstockTechnical conditions for inspection and delivery
BS EN 683-1:2006. Aluminium and aluminium alloys. FinstockTechnical conditions for inspection and delivery
BS EN 683-2:1997. Aluminium and aluminium alloys. FinstockMechanical properties
BS EN 683-2:2006. Aluminium and aluminium alloys. FinstockMechanical properties
BS EN 683-3:1997. Aluminium and aluminium alloys. FinstockTolerances on dimensions and form
BS EN 683-3:2006. Aluminium and aluminium alloys. FinstockTolerances on dimensions and form
BS EN 684:1996. Resilient floor coverings. Determination of seam strength
BS EN 685:1996. Resilient and laminate floor coverings. Classification
BS EN 685:2005. Resilient, textile and laminate floor coverings. Classification
BS EN 685:2007. Resilient, textile and laminate floor coverings. Classification
BS EN 686:1997. Resilient floor coverings. Specification for plain and decorative linoleum on a foam backing
BS EN 686:2011. Resilient floor coverings. Specification for plain and decorative linoleum on a foam backing
BS EN 687:1997. Resilient floor coverings. Specification for plain and decorative linoleum on a corkment backing
BS EN 687:2011. Resilient floor coverings. Specification for plain and decorative linoleum on a corkment backing
BS EN 688:1997. Resilient floor coverings. Specification for corklinoleum
BS EN 688:2011. Resilient floor coverings. Specification for corklinoleum
BS EN 689:1996, BS 6069-3.7:1996. Workplace atmospheres. Guidance for the assessment of exposure by inhalation to chemical agents for comparison with limit values and measurement strategy
BS EN 690:1994+A1:2009. Agricultural machinery. Manure spreaders. Safety
BS EN 691-1:2012. Safety of woodworking machinesCommon requirements
BS EN 692:1997. Mechanical presses. Safety
BS EN 692:2005+A1:2009. Machine tools. Mechanical presses. Safety
BS EN 693:2001. Machine tools. Safety. Hydraulic presses
BS EN 693:2001+A2:2011. Machine tools. Safety. Hydraulic presses
BS EN 694:2001. Fire-fighting hoses. Semi-rigid hoses for fixed systems
BS EN 695:1997. Kitchen sinks. Connecting dimensions
BS EN 695:2005. Kitchen sinks. Connecting dimensions
BS EN 696:1995. Fibre ropes for general service. Polyamide
BS EN 697:1995. Fibre ropes for general service. Polyester
BS EN 698:1995. Fibre ropes for general service. Manila and sisal
BS EN 699:1995. Fibre ropes for general service. Polypropylene
BS EN 700:1995. Fibre ropes for general service. Polyethylene
BS EN 701:1995. Fibre ropes for general service. General specification
BS EN 702:1995. Protective clothing. Protection against heat and flame. Test method. Determination of the contact heat transmission through protective clothing or its materials
BS EN 703:1996. Agricultural machinery. Silage cutters. Safety
BS EN 703:2004+A1:2009. Agricultural machinery. Silage loading, mixing and/or chopping and distributing machines. Safety
BS EN 704:1999+A1:2009. Agricultural machinery. Pick-up balers. Safety
BS EN 705:1995, BS 2782-12:Methods 1220A to C. Plastics piping systems. Glass-reinforced thermosetting (GRP) pipes and fittings. Methods for regression analyses and their use
BS EN 706:1996+A1:2009. Agricultural machinery. Vine shoot tipping machines. Safety
BS EN 707:1999+A1:2009. Agricultural machinery. Slurry tankers. Safety
BS EN 708:1997. Agricultural machinery. Soil working machines with powered tools. Safety
BS EN 709:1997+A4:2009. Agricultural and forestry machinery. Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s). Safety
BS EN 710:1997+A1:2010. Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment
BS EN 711:1996. Inland navigation vessels. Railings for decks. Requirements, types
BS EN 71-1:1998. Safety of toysMechanical and physical properties
BS EN 71-1:2001. Safety of toysMechanical and physical properties
BS EN 71-1:2005+A9:2009. Safety of toysMechanical and physical properties
BS EN 71-1:2011+A2:2013. Safety of toysMechanical and physical properties
BS EN 71-10:2005. Safety of toysOrganic chemical compounds. Sample preparation and extraction
BS EN 71-11:2005. Safety of toysOrganic chemical compounds. Methods of analysis
BS EN 71-12:2013. Safety of toysN-Nitrosamines and N-nitrosatable substances
BS EN 71-2:1994, BS 5665-2:1994. Safety of toysFlammability
BS EN 712:1995, BS 2782-11:Method 1123H:1995. Thermoplastics piping systems. End-load bearing mechanical joints between pressure pipes and fittings. Test method for resistance to pull-out under constant longitudinal force
BS EN 71-2:2003. Safety of toysFlammability
BS EN 71-2:2006+A1:2007. Safety of toysFlammability
BS EN 71-2:2011. Safety of toysFlammability
BS EN 713:1995, BS 2782-11:Method 1123B:1995. Plastics piping systems. Mechanical joints between fittings and polyolefin pressure pipes. Test method for leaktightness under internal pressure of assemblies subjected to bending
BS EN 71-3:1995, BS 5665-3:1995. Safety of toysSpecification for migration of certain elements
BS EN 71-3:2013. Safety of toysMigration of certain elements
BS EN 714:1995, BS 2782-11:Method 1123F:1995. Thermoplastics piping systems. Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings. Test method for leaktightness under internal hydrostatic pressure without end thrust
BS EN 71-4:1998+A3:2007. Safety of toysExperimental sets for chemistry and related activities
BS EN 71-4:2009. Safety of toysExperimental sets for chemistry and related activities
BS EN 71-4:2013. Safety of toysExperimental sets for chemistry and related activities
BS EN 71-5:1993+A2:2009, BS 5665-5:1993. Safety of toysChemical toys (sets) other than experimental sets
BS EN 715:1995, BS 2782-11:Method 1123G:1995. Thermoplastics piping systems. End-load-bearing joints between small diameter pressure pipes and fittings. Test method for leaktightness under internal water pressure, including end thrust
BS EN 71-5:2013. Safety of toysChemical toys (sets) other than experimental sets
BS EN 71-6:1995, BS 5665-6:1995. Safety of toysGraphical symbols for age warning labelling
BS EN 716-1:1996. Furniture. Children's cots and folding cots for domestic useSafety requirements
BS EN 716-1:2008+A1:2013. Furniture. Children's cots and folding cots for domestic useSafety requirements
BS EN 716-2:1996. Furniture. Children's cots and folding cots for domestic useTest methods
BS EN 716-2:2008+A1:2013. Furniture. Children's cots and folding cots for domestic useTest methods
BS EN 71-7:2002. Safety of toysFinger paints. Requirements and test methods
BS EN 717-1:2004. Wood-based panels. Determination of formaldehyde releaseFormaldehyde emission by the chamber method
BS EN 717-2:1995. Wood-based panels. Determination of formaldehyde releaseFormaldehyde release by the gas analysis method
BS EN 717-3:1996. Wood-based panels. Determination of formaldehyde releaseFormaldehyde release by the flask method
BS EN 718:1996. Resilient floor coverings. Determination of mass per unit area of a reinforcement or a backing of polyvinyl chloride floor coverings
BS EN 71-8:2003+A4:2009. Safety of toysSwings, slides and similar activity toys for indoor and outdoor family domestic use
BS EN 71-8:2011. Safety of toysActivity toys for domestic use
BS EN 719:1994. Welding co-ordination. Tasks and responsibilities
BS EN 71-9:2005+A1:2007. Safety of toysOrganic chemical compounds. Requirements
BS EN 720-1:1999. Transportable gas cylinders. Gases and gas mixturesProperties of pure gases
BS EN 720-2:1997. Transportable gas cylinders. Gases and gas mixturesDetermination of flammability and oxidizing ability of gases and gas mixtures
BS EN 721:1999. Leisure accommodation vehicles. Safety ventilation requirements
BS EN 721:2004. Leisure accommodation vehicles. Safety ventilation requirements
BS EN 722-1:1996. Leisure accommodation vehicles. Liquid fuel heating systemsCaravans and mobile homes (caravan holiday homes)
BS EN 722-1:2004. Leisure accommodation vehicles. Liquid fuel heating systemsCaravans and caravan holiday homes
BS EN 723:1996. Copper and copper alloys. Combustion method for determination of carbon on the inner surface of copper tubes or fittings
BS EN 723:2009. Copper and copper alloys. Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings
BS EN 724:1995. Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for non-active medical devices
BS EN 725-1:1997. Advanced technical ceramics. Methods of test for ceramic powdersDetermination of impurities in alumina
BS EN 725-1:2007. Advanced technical ceramics. Methods of test for ceramic powdersDetermination of impurities in alumina
BS EN 725-10:1997. Advanced technical ceramics. Methods of test for ceramic powdersDetermination of compaction properties
BS EN 725-10:2007. Advanced technical ceramics. Methods of test for ceramic powdersDetermination of compaction properties
BS EN 725-11:2006. Advanced technical ceramics. Methods of test for ceramic powdersDetermination of densification on natural sintering
BS EN 725-12:2001. Advanced technical ceramics. Methods of test for ceramic powdersChemical analysis of zirconia
BS EN 725-2:2007. Advanced technical ceramics. Methods of test for ceramic powdersDetermination of impurities in barium titanate
BS EN 725-3:1994. Advanced technical ceramics. Methods of test for ceramic powders.Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas
BS EN 725-3:2007. Advanced technical ceramics. Methods of test for ceramic powdersDetermination of the oxygen content of nonoxides by thermal extraction with a carrier gas
BS EN 725-4:2006. Advanced technical ceramics. Methods of test for ceramic powdersDetermination of oxygen content in aluminium nitride by XRF analysis
BS EN 725-5:1996. Advanced technical ceramics. Methods of test for ceramic powdersDetermination of the particle size distribution
BS EN 725-5:2007. Advanced technical ceramics. Methods of test for ceramic powdersDetermination of particle size distribution
BS EN 725-6:1996. Advanced technical ceramics. Methods of test for ceramic powdersDetermination of the specific surface area
BS EN 725-7:1996. Advanced technical ceramics. Methods of test for ceramic powdersDetermination of the absolute density
BS EN 725-8:1997. Advanced technical ceramics. Methods of test for ceramic powdersDetermination of tapped bulk density
BS EN 725-8:2006. Advanced technical ceramics. Methods of test for ceramic powdersDetermination of tapped bulk density
BS EN 725-9:1997. Advanced technical ceramics. Methods of test for ceramic powdersDetermination of untamped bulk density
BS EN 725-9:2006. Advanced technical ceramics. Methods of test for ceramic powdersDetermination of untapped bulk density
BS EN 726-1:1995. Identification card systems. Telecommunications. Integrated circuit(s) cards and terminalsSystem overview
BS EN 726-2:1996. Identification card systems. Telecommunications. Integrated circuit(s) cards and terminalsSecurity framework
BS EN 726-3:1996. Identification card systems. Telecommunications. Integrated circuit(s) cards and terminalsApplication independent card requirements
BS EN 726-4:1995. Identification card systems. Telecommunications. Integrated circuit(s) cards and terminalsApplication independent card related terminal requirements
BS EN 726-5:1999. Identification card systems. Telecommunications. Integrated circuit(s) cards and terminalsPayment methods
BS EN 726-6:1996. Identification card systems. Telecommunications. Integrated circuit(s) cards and terminalsTelecommunication features
BS EN 726-7:1999. Identification card systems. Telecommunications. Integrated circuit(s) cards and terminalsSecurity module
BS EN 727:1995, BS 2782-11:Method 1103V:1995. Plastics piping and ducting systems. Thermoplastics pipes and fittings. Determination of Vicat softening temperature (VST)
BS EN 728:1997, BS 2782-11:Method 1103D:1997. Plastics piping and ducting systems. Polyolefin pipes and fittings. Determination of oxidation induction time
BS EN 729-1:1995. Quality requirements for welding. Fusion welding of metallic materialsGuidelines for selection and use
BS EN 729-2:1995. Quality requirements for welding. Fusion welding of metallic materialsComprehensive quality requirements
BS EN 729-3:1995. Quality requirements for welding. Fusion welding of metallic materialsStandard quality requirements
BS EN 729-4:1995. Quality requirements for welding. Fusion welding of metallic materialsElementary quality requirements
BS EN 730:1995. Gas welding equipment. Equipment used in gas welding, cutting and allied processes, safety devices for fuel gases and oxygen or compressed air. General specifications, requirements and tests
BS EN 730-1:2002. Gas welding equipment. Safety devicesIncorporating a flame (flashback) arrestor
BS EN 730-2:2002. Gas welding equipment. Safety devicesNot incorporating a flame (flashback) arrestor
BS EN 731:1996. Gas welding equipment. Air-aspirated hand blowpipes. Specifications and tests
BS EN 732:1999. Specifications for dedicated liquefied petroleum gas appliances. Absorption refrigerators
BS EN 733:1995. End-suction centrifugal pumps, rating with 10 bar with bearing bracket. Nominal duty point, main dimensions, designation system
BS EN 734:1995. Side channel pumps PN 40. Nominal duty point, main dimensions, designation system
BS EN 735:1995. Overall dimensions of rotodynamic pumps. Tolerances
BS EN 736-1:1995. Valves. Terminology.Definition of types of valves
BS EN 736-2:1997. Valves. Terminology.Definition of components of valves
BS EN 736-3:1999. Valves. Terminology.Definition of terms
BS EN 736-3:2008. Valves. TerminologyDefinition of terms
BS EN 737-2:1998. Medical gas pipeline systemsAnaesthetic gas scavenging disposal systems. Basic requirements
BS EN 737-3:2000. Medical gas pipeline systemsPipelines for compressed medical gases and vacuum
BS EN 737-4:1998. Medical gas pipeline systemsTerminal units for anaesthetic gas scavenging systems
BS EN 738-1:1997. Pressure regulators for use with medical gasesPressure regulators and pressure regulators with flow metering devices
BS EN 738-2:1999. Pressure regulators for use with medical gasesManifold and line pressure regulators
BS EN 738-3:1999. Pressure regulators for use with medical gasesPressure regulators integrated with cylinder valves
BS EN 738-4:1999. Pressure regulators for use with medical gasesLow-pressure regulators intended for incorporation into medical equipment
BS EN 739:1998. Low-pressure hose assemblies for use with medical gases
BS EN 740:1999, BS 5724-2.204:1999. Anaesthetic workstations and their modules. Particular requirements
BS EN 741:2000+A1:2010. Continuous handling equipment and systems. Safety requirements for systems and their components for pneumatic handling of bulk materials
BS EN 74-1:2005. Couplers, spigot pins and baseplates for use in falsework and scaffoldsCouplers for tubes. Requirements and test procedures
BS EN 742:1994. Identification cards. ID-1 card. Location of contacts for cards and devices used in Europe
BS EN 74-2:2008. Couplers, spigot pins and baseplates for use in falsework and scaffoldsSpecial couplers. Requirements and test procedures
BS EN 743:1995, BS 2782-11:Methods 1102A & B. Plastics piping and ducting systems. Thermoplastics pipes. Determination of the longitudinal reversion
BS EN 74-3:2007. Couplers, spigot pins and baseplates for use in falsework and scaffoldsPlain base plates and spigot pins. Requirements and test procedures
BS EN 744:1996, BS 2782-11:Method 1108C:1996. Plastics piping and ducting systems. Thermoplastics pipes. Test method for resistance to external blows by the round-the-clock method
BS EN 745:1999+A1:2009. Agricultural machinery. Rotary mowers and flail-mowers. Safety
BS EN 746-1:1997+A1:2009. Industrial thermoprocessing equipmentCommon safety requirements for industrial thermoprocessing equipment
BS EN 746-2:1997. Industrial thermoprocessing equipmentSafety requirements for combustion and fuel handling systems
BS EN 746-2:2010. Industrial thermoprocessing equipmentSafety requirements for combustion and fuel handling systems
BS EN 746-3:1997+A1:2009. Industrial thermoprocessing equipmentSafety requirements for the generation and use of atmosphere gases
BS EN 746-4:2000. Industrial thermoprocessing equipmentParticular safety requirements for hot dip galvanizing thermoprocessing equipment
BS EN 746-5:2000. Industrial thermoprocessing equipmentParticular safety requirements for salt bath thermoprocessing equipment
BS EN 746-8:2000. Industrial thermoprocessing equipmentParticular safety requirements for quenching equipment
BS EN 747-1:1993. Furniture. Bunk beds for domestic useSafety requirements
BS EN 747-1:2007. Furniture. Bunk beds and high beds for domestic useSafety, strength and durability requirements
BS EN 747-1:2012. Furniture. Bunk beds and high beds Safety, strength and durability requirements
BS EN 747-2:1993. Furniture. Bunk beds for domestic useTest methods
BS EN 747-2:2007. Furniture. Bunk beds and high beds for domestic useTest methods
BS EN 747-2:2012. Furniture. Bunk beds and high bedsTest methods
BS EN 748:1996. Playing field equipment. Football goals. Functional and safety requirements, test methods
BS EN 748:2004. Playing field equipment. Football goals. Functional and safety requirements, test methods
BS EN 748:2013. Playing field equipment. Football goals. Functional and safety requirements, test methods
BS EN 749:1996. Playing field equipment. Handball goals. Functional and safety requirements, test methods
BS EN 749:2004. Playing field equipment. Handball goals. Functional and safety requirements, test methods
BS EN 750:1996. Playing field equipment. Hockey goals. Functional and safety requirements, test methods
BS EN 750:2004. Playing field equipment. Hockey goals. Functional and safety requirements, test methods
BS EN 751-1:1997. Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot waterAnaerobic jointing compounds
BS EN 751-2:1997. Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot waterNon-hardening jointing compounds
BS EN 751-3:1997. Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot waterUnsintered PTFE tapes
BS EN 752:2008. Drain and sewer systems outside buildings
BS EN 752-1:1996. Drain and sewer systems outside buildingsGeneralities and definitions
BS EN 752-2:1997. Drain and sewer systems outside buildingsPerformance requirements
BS EN 752-3:1997. Drain and sewer systems outside buildingsPlanning
BS EN 752-4:1998. Drain and sewer systems outside buildingsHydraulic design and environmental considerations
BS EN 752-5:1998. Drain and sewer systems outside buildingsRehabilitation
BS EN 752-6:1998. Drain and sewer systems outside buildingsPumping installations
BS EN 752-7:1998. Drain and sewer systems outside buildingsMaintenance and operations
BS EN 753-1:1997. Identification card systems. Intersector thin flexible cardsGeneral technical specifications
BS EN 753-2:1997. Identification card systems. Intersector thin flexible cardsMagnetic recording technique
BS EN 753-3:1999. Identification card systems. Intersector thin flexible cardsTest methods
BS EN 754-1:1997. Aluminium and aluminium alloys. Cold drawn rod/bar and tubeTechnical conditions for inspection and delivery
BS EN 754-1:2008. Aluminium and aluminium alloys. Cold drawn rod/bar and tubeTechnical conditions for inspection and delivery
BS EN 754-2:1997. Aluminium and aluminium alloys. Cold drawn rod/bar and tubeMechanical properties
BS EN 754-2:2008. Aluminium and aluminium alloys. Cold drawn rod/bar and tubeMechanical properties
BS EN 754-3:1996. Aluminium and aluminium alloys. Cold drawn rod/bar and tubeRound bars, tolerances on dimensions and form
BS EN 754-3:2008. Aluminium and aluminium alloys. Cold drawn rod/bar and tubeRound bars, tolerances on dimensions and form
BS EN 754-4:1996. Aluminium and aluminium alloys. Cold drawn rod/bar and tubeSquare bars, tolerances on dimensions and form
BS EN 754-4:2008. Aluminium and aluminium alloys. Cold drawn rod/bar and tubeSquare bars, tolerances on dimensions and form
BS EN 754-5:1996. Aluminium and aluminium alloys. Cold drawn rod/bar and tubeRectangular bars, tolerances on dimensions and form
BS EN 754-5:2008. Aluminium and aluminium alloys. Cold drawn rod/bar and tubeRectangular bars, tolerances on dimensions and form
BS EN 754-6:1996. Aluminium and aluminium alloys. Cold drawn rod/bar and tubeHexagonal bars, tolerances on dimensions and form
BS EN 754-6:2008. Aluminium and aluminium alloys. Cold drawn rod/bar and tubeHexagonal bars, tolerances on dimensions and form
BS EN 754-7:1998. Aluminium and aluminium alloys. Cold drawn rod/bar and tubeSeamless tubes, tolerances on dimensions and form
BS EN 754-7:2008. Aluminium and aluminium alloys. Cold drawn rod/bar and tubeSeamless tubes, tolerances on dimensions and form
BS EN 754-8:1998. Aluminium and aluminium alloys. Cold drawn rod/bar and tubePorthole tubes, tolerances on dimensions and form
BS EN 754-8:2008. Aluminium and aluminium alloys. Cold drawn rod/bar and tubePorthole tubes, tolerances on dimensions and form
BS EN 755-1:1997. Aluminium and aluminium alloys. Extruded rod/bar, tube and profilesTechnical conditions for inspection and delivery
BS EN 755-1:2008. Aluminium and aluminium alloys. Extruded rod/bar, tube and profilesTechnical conditions for inspection and delivery
BS EN 755-2:1997. Aluminium and aluminium alloys. Extruded rod/bar, tube and profilesMechanical properties
BS EN 755-2:2008. Aluminium and aluminium alloys. Extruded rod/bar, tube and profilesMechanical properties
BS EN 755-3:1996. Aluminium and aluminium alloys. Extruded rod/bar, tube and profilesRound bars, tolerances on dimensions and form
BS EN 755-3:2008. Aluminium and aluminium alloys. Extruded rod/bar, tube and profilesRound bars, tolerances on dimensions and form
BS EN 755-4:1996. Aluminium and aluminium alloys. Extruded rod/bar, tube and profilesSquare bars, tolerances on dimensions and form
BS EN 755-4:2008. Aluminium and aluminium alloys. Extruded rod/bar, tube and profilesSquare bars, tolerances on dimensions and form
BS EN 755-5:1996. Aluminium and aluminium alloys. Extruded rod/bar, tube and profilesRectangular bars, tolerances on dimensions and form
BS EN 755-5:2008. Aluminium and aluminium alloys. Extruded rod/bar, tube and profilesRectangular bars, tolerances on dimensions and form
BS EN 755-6:1996. Aluminium and aluminium alloys. Extruded rod/bar, tube and profilesHexagonal bars, tolerances on dimensions and form
BS EN 755-6:2008. Aluminium and aluminium alloys. Extruded rod/bar, tube and profilesHexagonal bars, tolerances on dimensions and form
BS EN 755-7:1998. Aluminium and aluminium alloys. Extruded rod/bar, tube and profilesSeamless tubes, tolerances on dimensions and form
BS EN 755-7:2008. Aluminium and aluminium alloys. Extruded rod/bar, tube and profilesSeamless tubes, tolerances on dimensions and form
BS EN 755-8:1998. Aluminium and aluminium alloys. Extruded rod/bar, tube and profilesPorthole tubes, tolerances on dimensions and form
BS EN 755-8:2008. Aluminium and aluminium alloys. Extruded rod/bar, tube and profilesPorthole tubes, tolerances on dimensions and form
BS EN 755-9:2001. Aluminium and aluminium alloys. Extruded rod/bar, tube and profilesProfiles, tolerances on dimensions and form
BS EN 755-9:2008. Aluminium and aluminium alloys. Extruded rod/bar, tube and profilesProfiles, tolerances on dimensions and form
BS EN 756:1996. Welding consumables. Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain steels. Classification
BS EN 756:2004. Welding consumables. Solid wires, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels. Classification
BS EN 757:1997. Welding consumables. Covered electrodes for manual metal arc welding of high strength steels. Classification
BS EN 758:1997. Welding consumables. Tubular cored electrodes for metal arc welding with and without a gas shield of non-alloy and fine grain steels. Classification
BS EN 759:1997. Welding consumables. Technical delivery conditions for welding filler metals. Type of product, dimensions, tolerances and marking
BS EN 760:1996. Welding consumables. Fluxes for submerged arc welding. Classification
BS EN 761:1995, BS 2782-12:Method 1214D:1995. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the creep factor under dry conditions
BS EN 763:1995, BS 2782-11:Methods 1103A & B. Plastics piping and ducting systems. Injection-moulded thermoplastics fittings. Test method for visually assessing effects of heating
BS EN 764:1995. Pressure equipment. Terminology and symbols. Pressure, temperature, volume
BS EN 764-1:2004. Pressure equipmentTerminology. Pressure, temperature, volume, nominal size
BS EN 764-2:2002. Pressure equipmentQuantities, symbols and units
BS EN 764-2:2012. Pressure equipmentQuantities, symbols and units
BS EN 764-3:2002. Pressure equipmentDefinition of parties involved
BS EN 764-4:2002. Pressure equipmentEstablishment of technical delivery conditions for metallic materials
BS EN 764-5:2002. Pressure equipmentCompliance and inspection documentation of materials
BS EN 764-7:2002. Pressure equipmentSafety systems for unfired pressure vessels
BS EN 765:1994. Sacks for the transport of food aid. Sacks made of woven polyolefin fabric other than polypropylene only
BS EN 766:1994. Sacks for the transport of food aid. Sacks made of jute fabric
BS EN 767:1994. Sacks for the transport of food aid. Sacks made of woven jute/polyolefin fabric
BS EN 768:1994. Sacks for the transport of food aid. Sacks made of lined cotton fabric
BS EN 769:1994. Sacks for the transport of food aid. Sacks made of woven cotton/polyolefin fabric
BS EN 770:1994. Sacks for the transport of food aid. Paper sacks
BS EN 771-1:2003. Specification for masonry unitsClay masonry units
BS EN 771-1:2011. Specification for masonry unitsClay masonry units
BS EN 771-2:2001. Specification for masonry unitsCalcium silicate masonry units
BS EN 771-2:2003. Specification for masonry unitsCalcium silicate masonry units
BS EN 771-2:2011. Specification for masonry unitsCalcium silicate masonry units
BS EN 771-3:2003. Specification for masonry unitsAggregate concrete masonry units (dense and light-weight aggregates)
BS EN 771-3:2011. Specification for masonry unitsAggregate concrete masonry units (dense and lightweight aggregates)
BS EN 771-4:2001. Specification for masonry unitsAutoclaved aerated concrete masonry units
BS EN 771-4:2003. Specification for masonry unitsAutoclaved aerated concrete masonry units
BS EN 771-4:2011. Specification for masonry unitsAutoclaved aerated concrete masonry units
BS EN 771-5:2003. Specification for masonry unitsManufactured stone masonry units
BS EN 771-5:2011. Specification for masonry unitsManufactured stone masonry units
BS EN 771-6:2001. Specification for masonry unitsNatural stone masonry units
BS EN 771-6:2005. Specification for masonry unitsNatural stone masonry units
BS EN 771-6:2011. Specification for masonry units Natural stone masonry units
BS EN 772-1:2000. Methods of test for masonry unitsDetermination of compressive strength
BS EN 772-1:2011. Methods of test for masonry unitsDetermination of compressive strength
BS EN 772-10:1999. Methods of test for masonry unitsDetermination of moisture content of calcium silicate and autoclaved aerated concrete units
BS EN 772-11:2000. Methods of test for masonry unitsDetermination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
BS EN 772-11:2011. Methods of test for masonry unitsDetermination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
BS EN 772-13:2000. Methods of test for masonry unitsDetermination of net and gross dry density of masonry units (except for natural stone)
BS EN 772-14:2002. Methods of test for masonry unitsDetermination of moisture movement of aggregate concrete and manufactured stone masonry units
BS EN 772-15:2000. Methods of test for masonry unitsDetermination of water vapour permeability of autoclaved aerated concrete masonry units
BS EN 772-16:2000. Methods of test for masonry unitsDetermination of dimensions
BS EN 772-16:2011. Methods of test for masonry unitsDetermination of dimensions
BS EN 772-18:2000. Methods of test for masonry unitsDetermination of freeze-thaw resistance of calcium silicate masonry units
BS EN 772-18:2011. Methods of test for masonry unitsDetermination of freeze-thaw resistance of calcium silicate masonry units
BS EN 772-19:2000. Methods of test for masonry unitsDetermination of moisture expansion of large horizontally perforated clay masonry units
BS EN 772-2:1998. Methods of test for masonry unitsDetermination of percentage area of voids in masonry units (by paper indentation)
BS EN 772-20:2000. Methods of test for masonry unitsDetermination of flatness of faces of masonry units
BS EN 772-21:2011. Methods of test for masonry unitsDetermination of water absorption of clay and calcium silicate masonry units by cold water absorption
BS EN 772-3:1998. Methods of test for masonry unitsDetermination of net volume and percentage of voids of clay masonry units by hydrostatic weighing
BS EN 772-4:1998. Methods of test for masonry unitsDetermination of real and bulk density and of total and open porosity for natural stone masonry units
BS EN 772-5:2001. Methods of test for masonry unitsDetermination of the active soluble salts content of clay masonry units
BS EN 772-6:2001. Methods of test for masonry unitsDetermination of bending tensile strength of aggregate concrete masonry units
BS EN 772-7:1998. Methods of test for masonry unitsDetermination of water absorption of clay masonry damp proof course units by boiling in water
BS EN 772-9:1998. Methods of test for masonry unitsDetermination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
BS EN 773:1999. General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers
BS EN 774:1996
BS EN 774:1996. Garden equipment. Hand held, integrally powered hedge trimmers. Safety
BS EN 774:1996. Garden equipment. Hand held, integrally powered hedge trimmers. Safety
BS EN 777-1:1999. Multi-burner gas-fired overhead radiant tube heater systems for non-domestic useSystem D, safety
BS EN 777-1:2009. Multi-burner gas-fired overhead radiant tube heater systems for non-domestic useSystem D. Safety
BS EN 777-2:1999. Multi-burner gas-fired overhead radiant tube heater systems for non-domestic useSystem E, safety
BS EN 777-2:2009. Multi-burner gas-fired overhead radiant tube heater systems for non-domestic useSystem E. Safety
BS EN 777-3:2000. Multi-burner gas-fired overhead radiant tube heater systems for non-domestic useSystem F, safety
BS EN 777-3:2009. Multi-burner gas-fired overhead radiant tube heater systems for non-domestic useSystem F. Safety
BS EN 777-4:1999. Multi-burner gas-fired overhead radiant tube heater systems for non-domestic useSystem H, safety
BS EN 777-4:2009. Multi-burner gas-fired overhead radiant tube heater systems for non-domestic useSystem H. Safety
BS EN 778:1998. Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
BS EN 778:2009. Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
BS EN 779:1993. Particulate air filters for general ventilation. Requirements, testing, marking
BS EN 779:2002. Particulate air filters for general ventilation. Determination of the filtration performance
BS EN 779:2012. Particulate air filters for general ventilation. Determination of the filtration performance
BS EN 786:1996+A2:2009. Garden equipment. Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers. Mechanical safety
BS EN 787:1994. Sacks for the transport of food aid. Sacks made of polyethylene film
BS EN 788:1994. Sacks for the transport of food aid. Tubular sacks made of composite film
BS EN 789:1996. Timber structures. Test methods. Determination of mechanical properties of wood-based panels
BS EN 789:2004. Timber structures. Test methods. Determination of mechanical properties of wood based panels
BS EN 790:1995. Inland navigation vessels. Stairs with inclination angles of 45° to 60°. Requirements, types
BS EN 790:2001. Inland navigation vessels. Stairs with inclination angles of 45° to 60°. Requirements, types
BS EN 791:1995+A1:2009. Drill rigs. Safety
BS EN 792-1:2000+A1:2008. Hand-held non-electric power tools. Safety requirementsAssembly power tools for non-threaded mechanical fasteners
BS EN 792-10:2000+A1:2008. Hand-held non-electric power tools. Safety requirementsCompression power tools
BS EN 792-11:2000+A1:2008. Hand-held non-electric power tools. Safety requirementsNibblers and shears
BS EN 792-12:2000+A1:2008. Hand-held non-electric power tools. Safety requirementsSmall circular, small oscillating and reciprocating saws
BS EN 792-13:2000+A1:2008. Hand-held non-electric power tools. Safety requirementsFastener driving tools
BS EN 792-2:2000+A1:2008. Hand-held non-electric power tools. Safety requirementsCutting-off and crimping power tools
BS EN 792-3:2000+A1:2008. Hand-held non-electric power tools. Safety requirementsDrills and tappers
BS EN 792-4:2000+A1:2008. Hand-held non-electric power tools. Safety requirementsNon-rotary percussive power tools
BS EN 792-5:2000+A1:2008. Hand-held non-electric power tools. Safety requirementsRotary percussive drills
BS EN 792-6:2000+A1:2008. Hand-held non-electric power tools. Safety requirementsAssembly power tools for threaded fasteners
BS EN 792-7:2001+A1:2008. Hand-held non-electric power tools. Safety requirementsGrinders
BS EN 792-8:2001+A1:2008. Hand-held non-electric power tools. Safety requirementsSanders and polishers
BS EN 792-9:2001+A1:2008. Hand-held non-electric power tools. Safety requirementsDie grinders
BS EN 793:1998. Particular requirements for safety of medical supply units
BS EN 794-1:1997+A2:2009, BS 5724-2.202:1997+A2:2009. Lung ventilators
BS EN 794-2:1997, BS 5724-2.203:1997. Lung ventilatorsParticular requirements for home care use
BS EN 794-3:1998+A2:2009. Lung ventilatorsParticular requirements for emergency and transport ventilators
BS EN 795:1997. Protection against falls from a height. Anchor devices. Requirements and testing
BS EN 795:2012. Personal fall protection equipment. Anchor devices
BS EN 796:1996. Bar coding. Symbology identifiers
BS EN 797:1996. Bar coding. Symbology specifications. 'EAN/UPC'
BS EN 798:1996. Bar coding. Symbology specifications. 'Codabar'
BS EN 799:1996. Bar coding. Symbology specifications. 'Code 128'
BS EN 80:2001. Wall-hung urinals. Connecting dimensions
BS EN 800:1996. Bar coding. Symbology specifications. 'Code 39'
BS EN 80000-13:2008. Quantities and unitsInformation science and technology
BS EN 80000-14:2009. Quantities and unitsTelebiometrics related to human physiology
BS EN 80000-6:2008. Quantities and unitsElectromagnetism
BS EN 80001-1:2011. Application of risk management for IT-networks incorporating medical devicesRoles, responsibilities and activities
BS EN 801:1996. Bar coding. Symbology specifications. 'Interleaved 2 of 5'
BS EN 802:1995, BS 2782-11:Method 1114F:1995. Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximum deformation by crushing
BS EN 803:1995, BS 2782-11:Method 1123J:1995. Plastics piping systems. Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping. Test method for resistance to a short-term internal pressure without end thrust
BS EN 804:1995, BS 2782-11:Method 1123K:1995. Plastics piping systems. Injection-moulded socket fittings for solvent-cemented joints for pressure piping. Test method for resistance to a short-term internal hydrostatic pressure
BS EN 80416-1:2002, IEC 80416-1:2001. Basic principles for graphical symbols for use on equipmentCreation of symbol originals
BS EN 80416-1:2009. Basic principles for graphical symbols for use on equipmentCreation of graphical symbols for registration
BS EN 80416-2:2001. Basic principles for graphical symbols for use on equipmentForm and use of arrows
BS EN 80416-3:2002+A1:2011. Basic principles for graphical symbols for use on equipmentGuidelines for the application of graphical symbols
BS EN 805:2000. Water supply. Requirements for systems and components outside buildings
BS EN 80601-2-30:2010. Medical electrical equipmentParticular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
BS EN 80601-2-35:2009+A11:2011. Medical electrical equipmentParticular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use
BS EN 80601-2-58:2009+A11:2011. Medical electrical equipmentParticular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
BS EN 80601-2-59:2009. Medical electrical equipmentParticular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening
BS EN 806-1:2000. Specifications for installations inside buildings conveying water for human consumptionGeneral
BS EN 806-2:2005. Specifications for installations inside buildings conveying water for human consumptionDesign
BS EN 806-3:2006. Specifications for installations inside buildings conveying water for human consumptionPipe sizing. Simplified method
BS EN 806-4:2010. Specifications for installations inside buildings conveying water for human consumptionInstallation
BS EN 806-5:2012. Specifications for installations inside buildings conveying water for human consumptionOperation and maintenance
BS EN 809:1998+A1:2009. Pumps and pump units for liquids. Common safety requirements
BS EN 810:1997. Dehumidifiers with electrically driven compressors. Rating tests, marking, operational requirements and technical data sheet
BS EN 811:1997. Safety of machinery. Safety distances to prevent danger zones being reached by the lower limbs
BS EN 81-1:1998+A3:2009. Safety rules for the construction and installation of liftsElectric lifts
BS EN 812:1998. Industrial bump caps
BS EN 81-2:1998+A3:2009. Safety rules for the construction and installation of liftsHydraulic lifts
BS EN 812:2012. Industrial bump caps
BS EN 81-21:2009+A1:2012. Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goodsNew passenger and goods passenger lifts in existing building
BS EN 81-28:2003. Safety rules for the construction and installation of liftsRemote alarm on passenger and goods passenger lifts
BS EN 813:1997. Personal protective equipment for prevention of falls from a height. Sit harnesses
BS EN 81-3:2000+A1:2008. Safety rules for the construction and installation of liftsElectric and hydraulic service lifts
BS EN 813:2008. Personal fall protection equipment. Sit harnesses
BS EN 81-31:2010. Safety rules for the construction and installation of lifts. Lifts for the transport of goods onlyAccessible goods only lifts
BS EN 81346-1:2009. Industrial systems, installations and equipment and industrial product. Structuring principles and reference designationsBasic rules
BS EN 81346-2:2009. Industrial systems, installations and equipment and industrial products. Structuring principles and reference designationsClassification of objects and codes for classes
BS EN 81-40:2008. Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goodsStairlifts and inclined lifting platforms intended for persons with impaired mobility
BS EN 814-1:1997. Air conditioners and heat pumps with electrically driven compressors. Cooling modeTerms, definitions and designations
BS EN 81-41:2010. Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goodsVertical lifting platforms intended for use by persons with impaired mobility
BS EN 814-2:1997. Air conditioners and heat pumps with electrically driven compressors. Cooling modeTesting and requirements for marking
BS EN 814-3:1997. Air conditioners and heat pumps with electrically driven compressors. Cooling modeRequirements
BS EN 81-43:2009. Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goodsLifts for cranes
BS EN 815:1996+A2:2008. Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock
BS EN 81-58:2003. Safety rules for the construction and installation of liftsExamination and tests. Landing doors fire resistance test
BS EN 816:1997. Sanitary tapware. Automatic shut-off valves PN 10
BS EN 817:1998. Sanitary tapware. Mechanical mixers (PN 10). General technical specifications
BS EN 817:2008. Sanitary tapware. Mechanical mixing valves (PN 10). General technical specifications
BS EN 81-70:2003. Safety rules for the construction and installation of liftsParticular applications for passenger and goods passenger lifts. Accessibility to lifts for persons including persons with disability
BS EN 81-71:2005. Safety rules for the construction and installation of lifts. Particular applications to passenger lifts and goods passenger liftsVandal resistant lifts
BS EN 81714-2:1999, IEC 81714-2:1998. Design of graphical symbols for use in the technical documentation of productsSpecification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange
BS EN 81714-2:2007. Design of graphical symbols for use in the technical documentation of productsSpecification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange
BS EN 81714-3:2001, IEC 81714-3:1998. Design of graphical symbols for use in the technical documentation of productsClassification of connect nodes, networks and their encoding
BS EN 81-72:2003. Safety rules for the construction and installation of liftsParticular applications for passenger and goods passenger lifts. Firefighters lifts
BS EN 81-73:2005. Safety rules for the construction and installation of liftsParticular applications for passenger and goods passenger lifts. Behaviour of lifts in the event of fire
BS EN 81-80:2003. Safety rules for the construction and installation of lifts. Existing liftsRules for the improvement of safety of existing passenger and goods passenger lifts
BS EN 818-1:1996+A1:2008. Short link chain for lifting purposes. Safety General conditions of acceptance
BS EN 818-2:1996+A1:2008. Short link chain for lifting purposes. SafetyMedium tolerance chain for chain slings. Grade 8
BS EN 81-82:2013. Safety rules for the construction and installation of lifts. Existing liftsRules for the improvement of the accessibility of existing lifts for persons including persons with disability
BS EN 818-3:1999+A1:2008. Short link chain for lifting purposes. SafetyMedium tolerance chain for chain slings. Grade 4
BS EN 818-4:1996+A1:2008. Short link chain for lifting purposes. Safety Chain slings - Grade 8
BS EN 818-5:1999+A1:2008. Short link chain for lifting purposes. Safety Chain slings - Grade 4
BS EN 818-6:2000+A1:2008. Short link chain for lifting purposes. SafetyChain slings. Specification for information for use and maintenance to be provided by the manufacturer
BS EN 818-7:2002+A1:2008. Short link chain for lifting purposes. SafetyFine tolerance hoist chain, Grade T (Types T, DAT and DT)
BS EN 820-1:2002. Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical propertiesDetermination of flexural strength at elevated temperatures
BS EN 820-2:2003. Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical propertiesDetermination of self-loaded deformation
BS EN 820-3:2004. Advanced technical ceramics. Monolithic ceramics. Thermomechanical propertiesDetermination of resistance to thermal shock by water quenching
BS EN 820-4:2009. Advanced technical ceramics. Thermomechanical properties of monolithic ceramicsDetermination of flexural creep deformation at elevated temperatures
BS EN 82045-1:2001, IEC 82045-1:2001. Document managementPrinciples and methods
BS EN 82045-2:2005. Document managementMetadata elements and information reference model
BS EN 820-5:2009. Advanced technical ceramics. Thermomechanical properties of monolithic ceramicsDetermination of elastic moduli at elevated temperatures
BS EN 82079-1:2012. Preparation of instructions for use. Structuring, content and presentationGeneral principles and detailed requirements
BS EN 821-1:1995. Advanced technical ceramics. Monolithic ceramics. Thermo-physical propertiesDetermination of thermal expansion
BS EN 821-2:1997. Advanced technical ceramics. Monolithic ceramics. Thermo-physical propertiesDetermination of thermal diffusivity by the laser flash (or heat pulse) method
BS EN 821-3:2005. Advanced technical ceramics. Monolithic ceramics. Thermo-physical propertiesDetermination of specific heat capacity
BS EN 822:1995. Thermal insulating products for building applications. Determination of length and width
BS EN 822:2013. Thermal insulating products for building applications. Determination of length and width
BS EN 823:1995. Thermal insulating products for building applications. Determination of thickness
BS EN 823:2013. Thermal insulating products for building applications. Determination of thickness
BS EN 824:1995. Thermal insulating products for building applications. Determination of squareness
BS EN 824:2013. Thermal insulating products for building applications. Determination of squareness
BS EN 825:1995. Thermal insulating products for building applications. Determination of flatness
BS EN 825:2013. Thermal insulating products for building applications. Determination of flatness
BS EN 826:1996. Thermal insulating products for building applications. Determination of compression behaviour
BS EN 826:2013. Thermal insulating products for building applications. Determination of compression behaviour
BS EN 827:1995. Adhesives. Determination of conventional solids content and constant mass solids content
BS EN 827:2005. Adhesives. Determination of conventional solids content and constant mass solids content
BS EN 828:1998. Adhesives. Wettability. Determination by measurement of contact angle and critical surface tension of solid surface
BS EN 828:2013. Adhesives. Wettability. Determination by measurement of contact angle and surface free energy of solid surface
BS EN 829:1997. In vitro diagnostic systems. Transport packages for medical and biological specimens. Requirements, tests
BS EN 832:2000. Thermal performance of buildings. Calculation of energy use for heating. Residential buildings
BS EN 834:1995. Heat cost allocators for the determination of the consumption of room heating radiators. Appliances with electrical energy supply
BS EN 834:2013. Heat cost allocators for the determination of the consumption of room heating radiators. Appliances with electrical energy supply
BS EN 835:1995. Heat cost allocators for the determination of the consumption of room heating radiators. Appliances without an electrical energy supply, based on the evaporation principle
BS EN 836:1997+A4:2011. Garden equipment. Powered lawnmowers. Safety
BS EN 837-1:1998. Pressure gaugesBourdon tube pressure gauges. Dimensions, metrology, requirements and testing
BS EN 837-2:1998. Pressure gaugesSelection and installation recommendations for pressure gauges
BS EN 837-3:1998. Pressure gaugesDiaphragm and capsule pressure gauges. Dimensions, metrology, requirements and testing
BS EN 838:1996. Workplace atmospheres. Diffusive samplers for the determination of gases and vapours. Requirements and test methods
BS EN 838:2010. Workplace exposure. Procedures for measuring gases and vapours using diffusive samplers. Requirements and test methods
BS EN 84:1997. Wood preservatives. Accelerated ageing of treated wood prior to biological testing. Leaching procedure
BS EN 840-1:1997. Mobile waste containersContainers with two wheels with a capacity from 80 l to 390 l for comb lifting devices. Dimensions and design
BS EN 840-1:2004. Mobile waste containersContainers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design
BS EN 840-1:2012. Mobile waste and recycling containersContainers with 2 wheels with a capacity up to 400 l for comb lifting devices. Dimensions and design
BS EN 840-2:1997. Mobile waste containersContainers with four wheels with a capacity from 500 l to 1200 l with flat lid(s), for trunnion and/or comb lifting devices. Dimensions and design
BS EN 840-2:2004. Mobile waste containersContainers with 4 wheels with capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices. Dimensions and design
BS EN 840-2:2012. Mobile waste and recycling containersContainers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices. Dimensions and design
BS EN 840-3:1997. Mobile waste containersContainers with four wheels with a capacity from 770 l to 1300 l with dome lid(s), for trunnion and/or comb lifting devices. Dimensions and design
BS EN 840-3:2004. Mobile waste containersContainers with 4 wheels with capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices. Dimensions and design
BS EN 840-3:2012. Mobile waste and recycling containersContainers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices. Dimensions and design
BS EN 840-4:1997. Mobile waste containersContainers with four wheels with a capacity from 750 l to 1700 l with flat lid(s), for wide trunnion or BG-and/or wide comb lifting devices. Dimensions and design
BS EN 840-4:2004. Mobile waste containersContainers with 4 wheels with capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices. Dimensions and design.
BS EN 840-4:2012. Mobile waste and recycling containersContainers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices. Dimensions and design
BS EN 840-5:1997. Mobile waste containersPerformance requirements and test methods
BS EN 840-5:2004. Mobile waste containersPerformance requirements and test methods
BS EN 840-5:2012. Mobile waste and recycling containersPerformance requirements and test methods
BS EN 840-6:1997. Mobile waste containersSafety and health requirements
BS EN 840-6:2004+A1:2008. Mobile waste containersSafety and health requirements
BS EN 840-6:2012. Mobile waste and recycling containersSafety and health requirements
BS EN 841:1996. Bar coding. Symbology specifications. Format description
BS EN 842:1996+A1:2008. Safety of machinery. Visual danger signals. General requirements, design and testing
BS EN 843-1:1995. Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperatureDetermination of flexural strength
BS EN 843-1:2006. Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperatureDetermination of flexural strength
BS EN 843-2:2006. Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperatureDetermination of Young's modulus, shear modulus and Poisson's ratio
BS EN 843-3:2005. Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperatureDetermination of subcritical crack growth parameters from constant stressing rate flexural strength tests
BS EN 843-4:2005. Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperatureVickers, Knoop and Rockwell superficial hardness
BS EN 843-5:2006. Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperatureStatistical analysis
BS EN 843-6:2009. Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperatureGuidance for fractographic investigation
BS EN 843-7:2010. Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperatureC-ring tests
BS EN 843-8:2010. Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperatureGuidelines for conducting proof tests
BS EN 844-1:1995. Round and sawn timber. TerminologyGeneral terms common to round timber and sawn timber
BS EN 844-10:1998. Round and sawn timber. TerminologyTerms relating to stain and fungal attack
BS EN 844-11:1998. Round and sawn timber. TerminologyTerms relating to degrade by insects
BS EN 844-12:2001. Round and sawn timber. TerminologyAdditional terms and general
BS EN 844-2:1997. Round and sawn timber. TerminologyGeneral terms relating to round timber
BS EN 844-3:1995. Round and sawn timber. TerminologyGeneral terms relating to sawn timber
BS EN 844-4:1997. Round and sawn timber. TerminologyTerms relating to moisture content
BS EN 844-5:1997. Round and sawn timber. TerminologyTerms relating to dimensions of round timber
BS EN 844-6:1997. Round and sawn timber. TerminologyTerms relating to dimensions of sawn timber
BS EN 844-7:1997. Round and sawn timber. TerminologyTerms relating to anatomical structure of timber
BS EN 844-8:1997. Round and sawn timber. TerminologyTerms relating to features of round timber
BS EN 844-9:1997. Round and sawn timber. TerminologyTerms relating to features of sawn timber
BS EN 845-1:2001. Specification for ancillary components for masonryTies, tension straps, hangers and brackets
BS EN 845-1:2003+A1:2008. Specification for ancillary components for masonryTies, tension straps, hangers and brackets
BS EN 845-1:2013. Specification for ancillary components for masonryWall ties, tension straps, hangers and brackets
BS EN 845-2:2001. Specification for ancillary components for masonryLintels
BS EN 845-2:2003. Specification for ancillary components for masonryLintels
BS EN 845-2:2013. Specification for ancillary components for masonryLintels
BS EN 845-3:2001. Specification for ancillary components for masonryBed joint reinforcement of steel meshwork
BS EN 845-3:2003+A1:2008. Specification for ancillary components for masonryBed joint reinforcement of steel meshwork
BS EN 845-3:2013. Specification for ancillary components for masonryBed joint reinforcement of steel meshwork
BS EN 846-10:2000. Methods of test for ancillary components for masonryDetermination of load capacity and load deflection characteristics of brackets
BS EN 846-11:2000. Methods of test for ancillary components for masonryDetermination of dimensions and bow of lintels
BS EN 846-13:2001. Methods of test for ancillary components for masonryDetermination of resistance to impact, abrasion and corrosion of organic coatings
BS EN 846-14:2012. Methods of test for ancillary components for masonryDetermination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it
BS EN 846-2:2000. Methods of test for ancillary components for masonryDetermination of bond strength of prefabricated bed joint reinforcement in mortar joints
BS EN 846-3:2000. Methods of test for ancillary components for masonryDetermination of shear load capacity of welds in prefabricated bed joint reinforcement
BS EN 846-4:2002. Methods of test for ancillary components for masonryDetermination of load capacity and load-deflection characteristics of straps
BS EN 846-5:2000. Methods of test for ancillary components for masonryDetermination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test)
BS EN 846-5:2012. Methods of test for ancillary components for masonryDetermination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test)
BS EN 846-6:2000. Methods of test for ancillary components for masonryDetermination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
BS EN 846-6:2012. Methods of test for ancillary components for masonryDetermination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
BS EN 846-7:2000. Methods of test for ancillary components for masonryDetermination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connection)
BS EN 846-7:2012. Methods of test for ancillary components for masonryDetermination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
BS EN 846-8:2000. Methods of test for ancillary components for masonryDetermination of load capacity and load-deflection characteristics of joist hangers
BS EN 846-9:2000. Methods of test for ancillary components for masonryDetermination of flexural resistance and shear resistance of lintels
BS EN 847-1:1997. Tools for woodworking. Safety requirementsMilling tools and circular saw blades
BS EN 847-1:2005. Tools for woodworking. Safety requirementsMilling tools, circular saw blades
BS EN 847-2:2001. Tools for woodworking. Safety requirementsRequirements for the shank of shank-mounted milling tools
BS EN 847-3:2004. Tools for woodworking. Safety requirements Clamping devices
BS EN 848-1:1999. Safety of woodworking machines. One side moulding machines with rotating toolSingle spindle vertical moulding machines
BS EN 848-1:2007+A2:2012. Safety of woodworking machines. One side moulding machines with rotating toolSingle spindle vertical moulding machines
BS EN 848-2:1999
BS EN 848-2:1999. Safety of woodworking machines. One side moulding machines with rotating toolSingle spindle handfed/integrated fed routing machines
BS EN 848-2:1999. Safety of woodworking machines. One side moulding machines with rotating toolSingle spindle handfed/integrated fed routing machines
BS EN 848-2:2007+A2:2012. Safety of woodworking machines. One side moulding machines with rotating toolSingle spindle hand fed/integrated fed routing machines
BS EN 848-3:1999. Safety of woodworking machines. One side moulding machines with rotating toolNumerical control (NC) boring machines and routing machines
BS EN 848-3:2007+A2:2009. Safety of woodworking machines. One side moulding machines with rotating toolsNumerically controlled (NC) boring and routing machines
BS EN 848-3:2012. Safety of woodworking machines. One side moulding machines with rotating toolNumerically controlled (NC) boring and routing machines
BS EN 849:1997. Transportable gas cylinders. Cylinder valves. Specification and type testing
BS EN 850:1997. Transportable gas cylinders. Pin-index, yoke-type valve outlet connections for medical use
BS EN 851:1996. Aluminium and aluminium alloys. Circle and circle stock for the production of culinary utensils. Specifications
BS EN 852-1:1996, BS 2782-11:Method 1122A:1996. Plastics piping systems for the transport of water intended for human consumption. Migration assessmentDetermination of migration values of plastics pipes
BS EN 853:1997. Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification
BS EN 854:1997. Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification
BS EN 855:1997. Plastics hoses and hose assemblies. Thermoplastics textile reinforced hydraulic type. Specification
BS EN 856:1997. Rubber hoses and hose assemblies. Rubber-covered spiral wire reinforced hydraulic type. Specification
BS EN 857:1997. Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification
BS EN 858-1:2002. Separator systems for light liquids (e.g. oil and petrol)Principles of product design, performance and testing, marking and quality control
BS EN 858-2:2003. Separator systems for light liquids (e.g. oil and petrol)Selection of nominal size, installation, operation and maintenance
BS EN 859:1998. Safety of woodworking machines. Handfed surface planing machines
BS EN 859:2007+A2:2012. Safety of woodworking machines. Hand fed surface planing machines
BS EN 860:1997. Safety of woodworking machines. One side thickness planing machines
BS EN 860:2007+A2:2012. Safety of woodworking machines. One side thickness planning machines
BS EN 861:1998. Safety of woodworking machines. Surface planing and thicknessing machines
BS EN 861:2007+A2:2012. Safety of woodworking machines. Surface planing and thicknessing machines
BS EN 862:1997. Packaging. Child-resistant packaging. Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products
BS EN 862:2001. Packaging. Child-resistant packaging. Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products
BS EN 862:2005. Packaging. Child resistant packaging. Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products
BS EN 863:1996. Protective clothing. Mechanical properties. Test method: puncture resistance
BS EN 864:1997, BS 5724-2.30:1997. Medical electrical equipment. Capnometers for use with humans. Particular requirements
BS EN 865:1997, BS 5724-2.201:1997. Pulse oximeters. Particular requirements
BS EN 866-1:1997. Biological systems for testing sterilizers and sterilization processesGeneral requirements
BS EN 866-2:1998. Biological systems for testing sterilizers and sterilization processesParticular systems for use in ethylene oxide sterilizers
BS EN 866-3:1997. Biological systems for testing sterilizers and sterilization processesParticular systems for use in moist heat sterilizers
BS EN 866-4:2000. Biological systems for testing sterilizers and sterilization processesParticular systems for use in irradiation sterilizers
BS EN 866-5:2000. Biological systems for testing sterilizers and sterilization processesParticular systems for use in low temperature steam and formaldehyde sterilizers
BS EN 866-6:2000. Biological systems for testing sterilizers and sterilization processesParticular systems for use in dry heat sterilizers
BS EN 866-7:2000. Biological systems for testing sterilizers and sterilization processesParticular requirements for self-contained biological indicator systems for use in moist heat sterilizers
BS EN 866-8:2000. Biological systems for testing sterilizers and sterilization processesParticular requirements for self-contained biological indicator systems for use in ethylene oxide sterilizers
BS EN 867-1:1997. Non-biological systems for use in sterilizersGeneral requirements
BS EN 867-2:1997. Non-biological systems for use in sterilizersProcess indicators (Class A)
BS EN 867-3:1997. Non-biological systems for use in sterilizersSpecification for Class B indicators for use in the Bowie and Dick test
BS EN 867-4:2001. Non-biological systems for use in sterilizersSpecification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration
BS EN 867-5:2001. Non-biological systems for use in sterilizersSpecification for indicator systems and process challenge devices for use in performance testing for small sterilizers Type B and Type S
BS EN 868-1:1997. Packaging materials and systems for medical devices which are to be sterilizedGeneral requirements and test methods
BS EN 868-10:2000. Packaging materials and systems for medical devices which are to be sterilizedAdhesive coated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids. Requirements and test methods
BS EN 868-10:2009. Packaging for terminally sterilized medical devicesAdhesive coated nonwoven materials of polyolefines. Requirements and test methods
BS EN 868-2:1999. Packaging materials and systems for medical devices which are to be sterilizedSterilization wrap. Requirements and test methods
BS EN 868-2:2009. Packaging for terminally sterilized medical devicesSterilization wrap. Requirements and test methods
BS EN 868-3:1999. Packaging materials and systems for medical devices which are to be sterilizedPaper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5). Requirements and test methods
BS EN 868-3:2009. Packaging for terminally sterilized medical devicesPaper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) Requirements and test methods
BS EN 868-4:1999. Packaging materials and systems for medical devices which are to be sterilizedPaper bags. Requirements and test methods
BS EN 868-4:2009. Packaging for terminally sterilized medical devicesPaper bags. Requirements and test methods
BS EN 868-5:1999. Packaging materials and systems for medical devices which are to be sterilizedHeat and self-sealable pouches and reels of paper and plastic film construction. Requirements and test methods
BS EN 868-5:2009. Packaging for terminally sterilized medical devicesSealable pouches and reels of porous and plastic film construction. Requirements and test methods
BS EN 868-6:1999. Packaging materials and systems for medical devices which are to be sterilizedPaper for the manufacture of packs for medical use for sterilization by ethylene oxide or irradiation. Requirements and test methods
BS EN 868-6:2009. Packaging for terminally sterilized medical devicesPaper for low temperature sterilization processes. Requirements and test methods
BS EN 868-7:1999. Packaging materials and systems for medical devices which are to be sterilizedAdhesive coated paper for the manufacture of heat sealable packs for medical use for sterilization by ethylene oxide or irradiation. Requirements and test methods
BS EN 868-7:2009. Packaging for terminally sterilized medical devicesAdhesive coated paper for low temperature sterilization processes. Requirements and test methods
BS EN 868-8:1999. Packaging materials and systems for medical devices which are to be sterilizedRe-usable sterilization containers for steam sterilizers conforming to EN 285. Requirements and test methods
BS EN 868-8:2009. Packaging for terminally sterilized medical devices Re-usable sterilization containers for steam sterilizers conforming to EN 285. Requirements and test methods
BS EN 868-9:2000. Packaging materials and systems for medical devices which are to be sterilizedUncoated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids. Requirements and test methods
BS EN 868-9:2009. Packaging for terminally sterilized medical devicesUncoated nonwoven materials of polyolefines. Requirements and test methods
BS EN 869:1998. Safety requirements for high pressure metal diecasting units
BS EN 869:2006+A1:2009. Safety of machinery. Safety requirements for pressure metal diecasting units
BS EN 872:1996, BS 6068-2.54:1996. Water quality. Determination of suspended solids. Method by filtration through glass fibre filters
BS EN 872:2005, BS 6068-2.54:2005. Water quality. Determination of suspended solids. Method by filtration through glass fibre filters
BS EN 873:1997. Light conveyor belts. Principal characteristics and applications
BS EN 874:1995. Gas welding equipment. Oxygen/fuel gas blowpipes (cutting machine type) of cylindrical barrel. Type of construction, general specifications, test methods
BS EN 875:1995. Destructive tests on welds in metallic materials. Impact tests. Test specimen location, notch orientation and examination
BS EN 876:1995. Destructive tests on welds in metallic materials. Longitudinal tensile test on weld metal in fusion welded joints
BS EN 877:1999+A1:2006. Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance
BS EN 878:1997. Chemicals used for treatment of water intended for human consumption. Aluminium sulfate
BS EN 878:2004. Chemicals used for treatment of water intended for human consumption. Aluminium sulfate
BS EN 88:1991. Pressure governors for gas appliances for inlet pressures up to 200 mbar
BS EN 881:1997. Chemicals used for treatment of water intended for human consumption. Aluminium chloride, aluminium chloride hydroxide and aluminium chloride hydroxide sulfate (monomeric)
BS EN 881:2004. Chemicals used for treatment of water intended for human consumption. Aluminium chloride (monomeric), aluminium chloride hydroxide (monomeric) and aluminium chloride hydroxide sulfate (monomeric)
BS EN 88-1:2007. Pressure regulators and associated safety devices for gas appliancesPressure regulators for inlet pressures up to and including 500 mbar
BS EN 88-1:2011. Pressure regulators and associated safety devices for gas appliancesPressure regulators for inlet pressures up to and including 50 kPa
BS EN 882:1997. Chemicals used for treatment of water intended for human consumption. Sodium aluminate
BS EN 882:2004. Chemicals used for treatment of water intended for human consumption. Sodium aluminate
BS EN 88-2:2007. Pressure regulators and associated safety devices for gas appliancesPressure regulators for inlet pressures above 500 mbar up to and including 5 bar
BS EN 883:1997. Chemicals used for treatment of water intended for human consumption. Polyaluminium chloride hydroxide and polyaluminium chloride hydroxide sulfate
BS EN 883:2004. Chemicals used for treatment of water intended for human consumption. Polyaluminium chloride hydroxide and polyaluminium chloride hydroxide sulfate
BS EN 885:2001. Chemicals used for treatment of water intended for human consumption. Polyaluminium chloride hydroxide silicate
BS EN 885:2004. Chemicals used for treatment of water intended for human consumption. Polyaluminium chloride hydroxide silicate
BS EN 88528-11:2004. Reciprocating internal combustion engine driven alternating current generating setsRotary uninterruptible power systems. Performance requirements and test methods
BS EN 886:2001. Chemicals used for treatment of water intended for human consumption. Polyaluminium hydroxide silicate sulfate
BS EN 886:2004. Chemicals used for treatment of water intended for human consumption. Polyaluminium hydroxide silicate sulfate
BS EN 887:2001. Chemicals used for treatment of water intended for human consumption. Aluminium iron (III) sulfate
BS EN 887:2004. Chemicals used for treatment of water intended for human consumption. Aluminium iron (III) sulfate
BS EN 888:1999. Chemicals used for treatment of water intended for human consumption. Iron(III) chloride
BS EN 888:2004. Chemicals used for treatment of water intended for human consumption. Iron (III) chloride
BS EN 889:1999. Chemicals used for treatment of water intended for human consumption. Iron(II) sulfate
BS EN 889:2004. Chemicals used for treatment of water intended for human consumption. Iron (II) sulfate
BS EN 89:2000. Gas-fired storage water heaters for the production of domestic hot water
BS EN 890:1999. Chemicals used for treatment of water intended for human consumption. Iron (III) sulfate
BS EN 890:2004. Chemicals used for treatment of water intended for human consumption. Iron (III) sulfate liquid
BS EN 890:2012. Chemicals used for treatment of water intended for human consumption. Iron (III) sulfate solution
BS EN 891:1999. Chemicals used for treatment of water intended for human consumption. Iron (III) chloride sulfate
BS EN 891:2004. Chemicals used for treatment of water intended for human consumption. Iron (III) chloride sulfate
BS EN 892:1997. Mountaineering equipment. Dynamic mountaineering ropes. Safety requirements and test methods
BS EN 892:2004. Mountaineering equipment. Dynamic mountaineering ropes. Safety requirements and test methods
BS EN 892:2012. Mountaineering equipment. Dynamic mountaineering ropes. Safety requirements and test methods
BS EN 893:1999. Mountaineering equipment. Crampons. Safety requirements and test methods
BS EN 893:2010. Mountaineering equipment. Crampons. Safety requirements and test methods
BS EN 894-1:1997+A1:2008. Safety of machinery. Ergonomics requirements for the design of displays and control actuatorsGeneral principles for human interactions with displays and control actuators
BS EN 894-2:1997+A1:2008. Safety of machinery. Ergonomics requirements for the design of displays and control actuatorsDisplays
BS EN 894-3:2000+A1:2008. Safety of machinery. Ergonomics requirements for the design of displays and control actuatorsControl actuators
BS EN 894-4:2010. Safety of machinery. Ergonomics requirements for design of displays and control actuatorsLocation and arrangement of displays and control actuators
BS EN 895:1995. Destructive tests on welds in metallic materials. Transverse tensile test
BS EN 896:1999. Chemicals used for treatment of water intended for human consumption. Sodium hydroxide
BS EN 896:2005. Chemicals used for treatment of water intended for human consumption. Sodium hydroxide
BS EN 896:2012. Chemicals used for treatment of water intended for human consumption. Sodium hydroxide
BS EN 897:1999. Chemicals used for treatment of water intended for human consumption. Sodium carbonate
BS EN 897:2005. Chemicals used for treatment of water intended for human consumption. Sodium carbonate
BS EN 897:2012. Chemicals used for treatment of water intended for human consumption. Sodium carbonate
BS EN 898:1998. Chemicals used for treatment of water intended for human consumption. Sodium hydrogen carbonate
BS EN 898:2005. Chemicals used for treatment of water intended for human consumption. Sodium hydrogen carbonate
BS EN 898:2012. Chemicals used for treatment of water intended for human consumption. Sodium hydrogen carbonate
BS EN 899:1997. Chemicals used for treatment of water intended for human consumption. Sulfuric acid
BS EN 899:2003. Chemicals used for treatment of water intended for human consumption. Sulfuric acid
BS EN 899:2009. Chemicals used for treatment of water intended for human consumption. Sulfuric acid
BS EN 900:2000. Chemicals used for treatment of water intended for human consumption. Calcium hypochlorite
BS EN 900:2007. Chemicals used for treatment of water intended for human consumption. Calcium hypochlorite
BS EN 901:2000. Chemicals used for treatment of water intended for human consumption. Sodium hypochlorite
BS EN 901:2007. Chemicals used for treatment of water intended for human consumption. Sodium hypochlorite
BS EN 901:2013. Chemicals used for treatment of water intended for human consumption. Sodium hypochlorite
BS EN 902:2000. Chemicals used for treatment of water intended for human consumption. Hydrogen peroxide
BS EN 902:2009. Chemicals used for treatment of water intended for human consumption. Hydrogen peroxide
BS EN 903:1994, BS 6068-2.23:1994. Water quality. Determination of anionic surfactants by measurement of the methylene blue index MBAS
BS EN 906:1996. Polyolefin agricultural twines
BS EN 907:1997. Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Safety
BS EN 908:1999+A1:2009. Agricultural and forestry machinery. Reel machines for irrigation. Safety
BS EN 909:1998+A1:2009. Agricultural and forestry machinery. Centre pivot and moving lateral types irrigation machines. Safety
BS EN 910:1996. Destructive tests on welds in metallic materials. Bend tests
BS EN 9100:2003. Aerospace series. Quality management systems. Requirements (based on ISO 9001:2000) and quality systems. Model for quality assurance in design, development, production, installation and servicing (based on ISO 9001:1994)
BS EN 9100:2009. Quality management systems. Requirements for aviation, space and defense organizations
BS EN 9101:2008. Aerospace series. Quality management systems. Assessment (based on ISO 9001:2000)
BS EN 9101:2011. Quality management systems. Audit requirements for aviation, space, and defence organizations
BS EN 9102:2006. Aerospace series. Quality systems. First article inspection
BS EN 9103:2005. Aerospace series. Quality management systems. Variation management of key characteristics
BS EN 9104:2006. Aerospace series. Quality management systems. Requirements for aerospace quality management system certification/ registrations programs
BS EN 9104-001:2013. Aerospace series. Quality management systemsRequirements for Aviation, Space, and Defence Quality Management System Certification Programs
BS EN 9104-002:2008. Aerospace series. Quality management systemsRequirements for oversight of aerospace quality management system certification/registrations programs
BS EN 9104-003:2009. Aerospace series. Quality management systemsRequirements for aerospace quality management system (AQMS) auditor training and qualification
BS EN 9104-003:2010. Aerospace series. Quality management systemsRequirements for aerospace quality management system (AQMS) auditor training and qualification
BS EN 911:1996, BS 2782-11:Method 1123W:1996. Plastics piping systems. Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping. Test method for leaktightness under external hydrostatic pressure
BS EN 9110:2005. Aerospace series. Quality systems. Model for quality assurance applicable to maintenance organizations
BS EN 9110:2010. Quality management systems. Requirements for aviation maintenance organizations
BS EN 9111:2005. Aerospace series. Quality management systems. Assessment applicable to maintenance organizations
BS EN 9115:2013. Quality Management Systems. Requirements for Aviation, Space and Defense Organizations. Deliverable Software (Supplement to EN 9100)
BS EN 912:2000. Timber fasteners. Specifications for connections for timber
BS EN 912:2011. Timber fasteners. Specifications for connectors for timbers
BS EN 9120:2005. Aerospace series. Quality management systems. Requirements for stockist distributors
BS EN 9120:2010. Quality management systems. Requirements for aviation, space and defence distributors
BS EN 9121:2005. Aerospace series. Quality management systems. Assessment applicable to stockist distributors
BS EN 9121:2009. Aerospace series. Quality management systems. Assessment applicable to stockist distributors
BS EN 913:1996. Gymnastic equipment. General safety requirements and test methods
BS EN 913:2008. Gymnastic equipment. General safety requirements and test methods
BS EN 9131:2009. Aerospace series. Quality management systems. Nonconformance documentation
BS EN 9132:2006. Aerospace series. Quality management systems. Data matrix quality requirements for parts marking
BS EN 9133:2004. Aerospace series. Quality management systems. Qualification procedure for aerospace standard parts
BS EN 9137:2012. Quality management systems. Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System
BS EN 914:1996. Gymnastic equipment. Parallel bars and combination asymmetric/parallel bars. Functional and safety requirements, test methods
BS EN 914:2008. Gymnastic equipment. Parallel bars and combination asymmetric/parallel bars. Requirements and test methods including safety
BS EN 915:1996. Gymnastic equipment. Asymmetric bars. Functional and safety requirements, test methods
BS EN 915:2008. Gymnastic equipment. Asymmetric bars. Requirements and test methods including safety
BS EN 916:1996. Gymnastic equipment. Vaulting boxes. Functional and safety requirements, test methods
BS EN 916:2003. Gymnastic equipment. Vaulting boxes. Requirements and test methods including safety
BS EN 917:1997, BS 2782-11:Methods 1134A & B. Plastics piping systems. Thermoplastics valves. Test methods for resistance to internal pressure and leaktightness
BS EN 918:1996. Geotextiles and geotextile-related products. Dynamic perforation test (Cone drop test)
BS EN 919:1995. Fibre ropes for general service. Determination of certain physical and mechanical properties
BS EN 920:1995. Paper and board intended to come into contact with foodstuffs. Determination of water soluble matter
BS EN 920:1998. Paper and board intended to come into contact with foodstuffs. Determination of dry matter content in an aqueous extract
BS EN 920:2001. Paper and board intended to come into contact with foodstuffs. Determination of dry matter content in an aqueous extract
BS EN 9200:2004. Programme management. Guidelines for project management specification
BS EN 921:1995, BS 2782-11:Method 1127A:1995.. Plastics piping systems. Thermoplastics pipes. Determination of resistance to internal pressure at constant temperature
BS EN 922:1995, BS 2782-11:Method 1140A:1995. Plastics piping and ducting systems. Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U). Specimen preparation for determination of the viscosity number and calculation of the k-value
BS EN 923:1998. Adhesives. Terms and definitions
BS EN 923:2005+A1:2008. Adhesives. Terms and definitions
BS EN 924:1995. Adhesives. Solvent-borne and solvent-free adhesives. Determination of flashpoint
BS EN 924:2003. Adhesives. Solvent-borne and solvent-free adhesives. Determination of flashpoint
BS EN 926-1:1996. Paragliding equipment. ParaglidersRequirements and test methods for structural strength
BS EN 926-1:2006. Paragliding equipment. ParaglidersRequirements and test methods for structural strength
BS EN 926-2:2005. Paragliding equipment. ParaglidersRequirements and test methods for classifying flight safety characteristics
BS EN 927-1:1997. Paints and varnishes. Coating materials and coating systems for exterior woodClassification and selection
BS EN 927-1:2013. Paints and varnishes. Coating materials and coating systems for exterior woodClassification and selection
BS EN 927-2:2006. Paints and varnishes. Coating materials and coating systems for exterior woodPerformance specification
BS EN 927-3:2000. Paints and varnishes. Coating materials and coating systems for exterior woodNatural weathering test
BS EN 927-3:2006. Paints and varnishes. Coating materials and coating systems for exterior woodNatural weathering test
BS EN 927-3:2012. Paints and varnishes. Coating materials and coating systems for exterior woodNatural weathering test
BS EN 927-4:2000. Paints and varnishes. Coating materials and coating systems for exterior woodAssessment of the water-vapour permeability
BS EN 927-5:2000. Paints and varnishes. Coating materials and coating systems for exterior woodAssessment of the liquid water permeability
BS EN 927-5:2006. Paints and varnishes. Coating materials and coating systems for exterior woodAssessment of the liquid water permeability
BS EN 927-6:2006. Paints and varnishes. Coating materials and coating systems for exterior woodExposure of wood coatings to artificial weathering using fluorescent UV lamps and water
BS EN 928:1996. Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for in vitro diagnostic medical devices
BS EN 929:1995. Inland navigation vessels. Push-tows. Mounting attachment for demountable signal masts
BS EN 930:1997+A2:2009. Footware, leather and imitation leather goods manufacturing machines. Roughing, scouring, polishing and trimming machines. Safety requirements
BS EN 9300-003:2012. Aerospace series. LOTAR. Long term archiving and retrieval of digital technical product documentation such as 3D, CAD and PDM dataFundamentals and concepts
BS EN 9300-004:2013. Aerospace series. LOTAR. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM dataDescription methods
BS EN 9300-011:2013. Aerospace series. LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM dataReference process description "Data preparation"
BS EN 9300-012:2013. Aerospace series. LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM dataReference process description ''Ingest''
BS EN 9300-013:2013. Aerospace series. LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM dataReference process description "Archival Storage"
BS EN 9300-014:2013. Aerospace series. LOTAR. LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM dataReference process description "Retrieval"
BS EN 9300-015:2013. Aerospace series. LOTAR. LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM dataReference process description "Removal"
BS EN 931:1997+A2:2009. Footwear manufacturing machines. Lasting machines. Safety requirements
BS EN 932-1:1997. Tests for general properties of aggregatesMethods for sampling
BS EN 932-2:1999. Tests for general properties of aggregatesMethods for reducing laboratory samples
BS EN 932-3:1997. Tests for general properties of aggregatesProcedure and terminology for simplified petrographic description
BS EN 932-5:2000. Tests for general properties of aggregatesCommon equipment and calibration
BS EN 932-5:2012. Tests for general properties of aggregatesCommon equipment and calibration
BS EN 932-6:1999. Tests for general properties of aggregatesDefinitions of repeatability and reproducibility
BS EN 933-1:1997. Tests for geometrical properties of aggregatesDetermination of particle size distribution. Sieving method
BS EN 933-1:2012. Tests for geometrical properties of aggregatesDetermination of particle size distribution. Sieving method
BS EN 933-10:2001. Tests for geometrical properties of aggregatesAssessment of fines. Grading of fillers (air-jet sieving)
BS EN 933-10:2009. Tests for geometrical properties of aggregatesAssessment of fines. Grading of filler aggregates (air jet sieving)
BS EN 933-11:2009. Tests for geometrical properties of aggregatesClassification test for the constituents of coarse recycled aggregate
BS EN 933-2:1996. Tests for geometrical properties of aggregatesDetermination of particle size distribution. Test sieves, nominal size of apertures
BS EN 933-3:1997. Tests for geometrical properties of aggregatesDetermination of particle shape. Flakiness index
BS EN 933-3:2012. Tests for geometrical properties of aggregatesDetermination of particle shape. Flakiness index
BS EN 933-4:2000. Tests for geometrical properties of aggregatesDetermination of particle shape. Shape index
BS EN 933-4:2008. Tests for geometrical properties of aggregatesDetermination of particle shape. Shape index
BS EN 933-5:1998. Tests for geometrical properties of aggregatesDetermination of percentage of crushed and broken surfaces in coarse aggregate particles
BS EN 933-6:2001. Tests for geometrical properties of aggregatesAssessment of surface characteristics. Flow coefficient of aggregates
BS EN 933-7:1998. Tests for geometrical properties of aggregatesDetermination of shell content. Percentage of shells in coarse aggregates
BS EN 933-8:1999. Tests for geometrical properties of aggregatesAssessment of fines. Sand equivalent test
BS EN 933-8:2012. Tests for geometrical properties of aggregatesAssessment of fines. Sand equivalent test
BS EN 933-9:1999. Tests for geometrical properties of aggregatesAssessment of fines. Methylene blue test
BS EN 933-9:2009+A1:2013. Tests for geometrical properties of aggregatesAssessment of fines. Methylene blue test
BS EN 934-1:2008. Admixtures for concrete, mortar and groutCommon requirements
BS EN 934-2:1998. Admixtures for concrete, mortar and groutConcrete admixtures. Definitions and requirements
BS EN 934-2:2001. Admixtures for concrete, mortar and groutConcrete admixtures. Definitions,requirements, conformity, marking and labelling
BS EN 934-2:2009+A1:2012. Admixtures for concrete, mortar and grout Concrete admixtures. Definitions, requirements, conformity, marking and labelling
BS EN 934-3:2003. Admixtures for concrete, mortar and groutAdmixtures for masonry mortar. Definitions, requirements, conformity, marking and labelling
BS EN 934-3:2009+A1:2012. Admixtures for concrete, mortar and groutAdmixtures for masonry mortar. Definitions, requirements, conformity and marking and labelling
BS EN 934-4:2000. Admixtures for concrete, mortar and groutAdmixtures for grout for prestressing tendons. Definitions, requirements and conformity
BS EN 934-4:2001. Admixtures for concrete, mortar and groutAdmixtures for grout for prestressing tendons. Definitions, requirements, conformity, marking and labelling
BS EN 934-4:2009. Admixtures for concrete, mortar and groutAdmixtures for grout for prestressing tendons. Definitions, requirements, conformity, marking and labelling
BS EN 934-5:2007. Admixtures for concrete, mortar and groutAdmixtures for sprayed concrete. Definitions, requirements, conformity, marking and labelling
BS EN 934-6:2000. Admixtures for concrete, mortar and groutSampling, conformity control, evaluation of conformity, marking and labelling
BS EN 934-6:2001. Admixtures for concrete, mortar and groutSampling, conformity control and evaluation of conformity
BS EN 935:2001. Chemicals used for treatment of water intended for human consumption. Aluminium iron (III) chloride (monomeric) and aluminium iron (III) chloride hydroxide (monomeric)
BS EN 935:2004. Chemicals used for treatment of water intended for human consumption. Aluminium iron(III) chloride (monomeric) and aluminium iron(III) chloride hydroxide (monomeric)
BS EN 936:1998. Chemicals used for treatment of water intended for human consumption. Carbon dioxide
BS EN 936:2006. Chemicals used for treatment of water intended for human consumption. Carbon dioxide
BS EN 937:1999. Chemicals used for treatment of water intended for human consumption. Chlorine
BS EN 937:2009. Chemicals used for treatment of water intended for human consumption. Chlorine
BS EN 938:2000. Chemicals used for treatment of water intended for human consumption. Sodium chlorite
BS EN 938:2009. Chemicals used for treatment of water intended for human consumption. Sodium chlorite
BS EN 939:2000. Chemicals used for treatment of water intended for human consumption. Hydrochloric acid
BS EN 939:2009. Chemicals used for treatment of water intended for human consumption. Hydrochloric acid
BS EN 940:1997. Safety of woodworking machines. Combined woodworking machines
BS EN 940:2009+A1:2012. Safety of woodworking machines. Combined woodworking machines
BS EN 941:1996. Aluminium and aluminium alloys. Circle and circle stock for general applications. Specifications
BS EN 942:1996. Timber in joinery. General classification of timber quality
BS EN 942:2007. Timber in joinery. General requirements
BS EN 943-1:2002. Protective clothing against liquid and gaseous chemicals, aerosols and solid particlesPerformance requirements for ventilated and non-ventilated "gas-tight" (Type 1) and "non-gas-tight" (Type 2) chemical protective suits
BS EN 943-2:2002. Protective clothing against liquid and gaseous chemicals, aerosols and solid particlesPerformance requirements for $0Qgas-tight$0R (Type 1) chemical protective suits for emergency teams (ET)
BS EN 947:1999. Hinged or pivoted doors. Determination of the resistance to vertical load
BS EN 948:1999. Hinged or pivoted doors. Determination of the resistance to static torsion
BS EN 949:1999. Windows and curtain walling, doors, blinds and shutters. Determination of the resistance to soft and heavy body impact for doors
BS EN 950:1999. Door leaves. Determination of the resistance to hard body impact
BS EN 951:1999. Door leaves. Method for measurement of height, width, thickness and squareness
BS EN 952:1999. Door leaves. General and local flatness. Measurement method
BS EN 953:1997+A1:2009. Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
BS EN 954-1:1997. Safety of machinery. Safety related parts of control systemsGeneral principles for design
BS EN 955-2:1995, BS 1902-2.1:1995. Chemical analysis of refractory productsProducts containing silica and/or alumina (wet method)
BS EN 957-1:1997. Stationary training equipmentGeneral safety requirements and test methods
BS EN 957-1:2005. Stationary training equipmentGeneral safety requirements and test methods
BS EN 957-10:2005. Stationary training equipmentExercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods
BS EN 957-2:1997. Stationary training equipmentStrength training equipment. Additional specific safety requirements and test methods
BS EN 957-2:2003. Stationary training equipmentStrength training equipment,additional specific safety requirements and test methods
BS EN 957-4:1997. Stationary training equipmentStrength training benches. Additional specific safety requirements and test methods
BS EN 957-4:2006+A1:2010. Stationary training equipmentStrength training benches, additional specific safety requirements and test methods
BS EN 957-5:1997. Stationary training equipmentPedal crank training equipment. Additional specific safety requirements and test methods
BS EN 957-5:2009. Stationary training equipmentStationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods
BS EN 957-6:2001. Stationary training equipmentTreadmills, additional specific safety requirements and test methods
BS EN 957-6:2010. Stationary training equipmentTreadmills, additional specific safety requirements and test methods
BS EN 957-7:1999. Stationary training equipmentRowing machines, additional specific safety requirements and test methods
BS EN 957-8:1998. Stationary training equipmentSteppers, stairclimbers and climbers. Additional specific safety requirements and test methods
BS EN 957-9:2003. Stationary training equipmentElliptical trainers, additional specific safety requirements and test methods
BS EN 958:1997. Mountaineering equipment. Energy absorbing systems for use in klettersteig (via ferrata) climbing. Safety requirements and test methods
BS EN 958:2006+A1:2010. Mountaineering equipment. Energy absorbing systems for use in klettersteig (via ferrata) climbing. Safety requirements and test methods
BS EN 959:1997. Mountaineering equipment. Rock anchors. Safety requirements and test methods
BS EN 959:2007. Mountaineering equipment. Rock anchors. Safety requirements and test methods
BS EN 960:1995. Headforms for use in the testing of protective helmets
BS EN 960:2006. Headforms for use in the testing of protective helmets
BS EN 961:1996. Gas welding equipment. Manifold regulators used in welding, cutting and allied processes up to 200 bar
BS EN 962:1997. Transportable gas cylinders. Valve protection caps and valve guards for industrial and medical gas cylinders. Design, construction and tests
BS EN 963:1995. Geotextiles and geotextile-related products. Sampling and preparation of test specimens
BS EN 964-1:1995. Geotextiles and geotextile-related products. Determination of thickness at specified pressuresSingle layers
BS EN 965:1995. Geotextiles and geotextile-related products. Determination of mass per unit area
BS EN 966:1996. Helmets for airborne sports
BS EN 966:2012+A1:2012. Helmets for airborne sports
BS EN 967:1997. Head protectors for ice hockey players
BS EN 969:1996. Specification for ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods
BS EN 969:2009. Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods
BS EN 970:1997. Non-destructive examination of fusion welds. Visual examination
BS EN 971-1:1996. Paints and varnishes. Terms and definitions for coating materialsGeneral terms
BS EN 972:1998+A1:2010. Tannery machines. Reciprocating roller machines. Safety requirements
BS EN 973:2002. Chemicals used for treatment of water intended for human consumption. Sodium chloride for regeneration of ion exchangers
BS EN 973:2009. Chemicals used for treatment of water intended for human consumption. Sodium chloride for regeneration of ion exchangers
BS EN 974:1997. Chemicals used for treatment of water intended for human consumption. Phosphoric acid
BS EN 974:2003. Chemicals used for treatment of water intended for human consumption. Phosphoric acid
BS EN 975-1:1996. Sawn timber. Appearance grading of hardwoodsOak and beech
BS EN 975-1:2009. Sawn timber. Appearance grading of hardwoodsOak and beech
BS EN 975-2:2004. Sawn timber. Appearance grading of hardwoodsPoplars
BS EN 976-1:1997. Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuelsRequirements and test methods for single wall tanks
BS EN 976-2:1997. Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuelsTransport, handling, storage and installation of single wall tanks
BS EN 977:1998. Underground tanks of glass-reinforced plastics (GRP). Method for one side exposure to fluids
BS EN 978:1997. Underground tanks of glass-reinforced plastics (GRP). Determination of factor α and factor β
BS EN 980:1997. Graphical symbols for use in the labelling of medical devices
BS EN 980:2003. Graphical symbols for use in the labelling of medical devices
BS EN 980:2008. Symbols for use in the labelling of medical devices
BS EN 981:1996+A1:2008. Safety of machinery. System of auditory and visual danger and information signals
BS EN 982:1996+A1:2008. Safety of machinery. Safety requirements for fluid power systems and their components. Hydraulics
BS EN 983:1996+A1:2008. Safety of machinery. Safety requirements for fluid power systems and their components. Pneumatics
BS EN 984:1995. Determination of the mass per unit area of the use surface of needled floor coverings
BS EN 984:2001. Textile floor coverings. Determination of the mass per unit area of the use surface of needled floor coverings
BS EN 985:1995. Textile floor coverings. Castor chair test
BS EN 985:2001. Textile floor coverings. Castor chair test
BS EN 986:1995. Textile floor coverings. Tiles. Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane
BS EN 986:2005. Textile floor coverings. Tiles. Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane
BS EN 988:1997. Zinc and zinc alloys. Specification for rolled flat products for building
BS EN 989:1996. Determination of the bond behaviour between reinforcing bars and autoclaved aerated concrete by the 'push-out' test
BS EN 990:1996. Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure
BS EN 990:2002. Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure
BS EN 991:1996. Determination of the dimensions of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
BS EN 992:1996. Determination of the dry density of lightweight aggregate concrete with open structure
BS EN 993-1:1995, BS 1902-3.8:1995. Methods of test for dense shaped refractory productsDetermination of bulk density, apparent porosity and true porosity
BS EN 993-10:1998, BS 1902-5.10:1998. Methods of test for dense shaped refractory productsDetermination of permanent change in dimensions on heating
BS EN 993-11:2007. Methods of test for dense shaped refractory productsDetermination of resistance to thermal shock
BS EN 993-12:1997, BS 1902-5.2:1997. Methods of test for dense shaped refractory productsDetermination of pyrometric cone equivalent (refractoriness)
BS EN 993-13:1995. Methods of test for dense shaped refractory productsSpecification for pyrometric reference cones for laboratory use
BS EN 993-14:1998, BS 1902-5.6:1998. Methods of test for dense shaped refractory productsDetermination of thermal conductivity by the hot-wire (cross-array) method
BS EN 993-15:1998. Methods of test for dense shaped refractory productsDetermination of thermal conductivity by the hot-wire (parallel) method
BS EN 993-15:2005. Methods of test for dense shaped refractory productsDetermination of thermal conductivity by the hot wire (parallel) method
BS EN 993-16:1995. Methods of test for dense shaped refractory productsDetermination of resistance to sulfuric acid
BS EN 993-17:1999. Methods of test for dense shaped refractory productsDetermination of bulk density of granular materials by the mercury method with vacuum
BS EN 993-18:2002. Methods of test for dense shaped refractory productsDetermination of bulk density of granular materials by the water method with vacuum
BS EN 993-19:2004. Methods of test for dense shaped refractory productsDetermination of thermal expansion by a differential method
BS EN 993-2:1995, BS 1902-3.4:1995. Methods of test for dense shaped refractory productsDetermination of true density
BS EN 993-20:2004. Methods of test for dense shaped refractory productsDetermination of resistance to abrasion at ambient temperature
BS EN 993-3:1997. Methods of test for dense shaped refractory productsTest methods for carbon-containing refractories
BS EN 993-4:1995, BS 1902-3.9:1995. Methods of test for dense shaped refractory productsDetermination of permeability to gases
BS EN 993-5:2000, BS 1902-4.3:2000. Methods of test for dense shaped refractory productsDetermination of cold crushing strength
BS EN 993-6:1995, BS 1902-4.4:1995. Methods of test for dense shaped refractory productsDetermination of modulus of rupture at ambient temperature
BS EN 993-7:2000, BS 1902-4.5:2000. Methods of test for dense shaped refractory productsDetermination of modulus of rupture at elevated temperatures
BS EN 993-8:1997. Methods of test for dense shaped refractory productsDetermination of refractoriness-under-load
BS EN 993-9:1997. Methods of test for dense shaped refractory productsDetermination of creep in compression
BS EN 994:1996. Textile floor coverings. Determination of the side length, squareness and straightness of tiles
BS EN 994:2012. Textile floor coverings. Determination of the side length, squareness and straightness of tiles
BS EN 995:1996. Textile floor coverings. Assessment of the creep of the backings
BS EN 996:1995+A3:2009. Piling equipment. Safety requirements
BS EN 997:1999. WC pans with integral trap
BS EN 997:2003. WC pans and WC suites with integral trap
BS EN 997:2012. WC pans and WC suites with integral trap
BS EN 998-1:2003. Specification for mortar for masonryRendering and plastering mortar
BS EN 998-1:2010. Specification for mortar for masonryRendering and plastering mortar
BS EN 998-2:2002. Specification for mortar for masonryMasonry mortar
BS EN 998-2:2003. Specification for mortar for masonryMasonry mortar
BS EN 998-2:2010. Specification for mortar for masonry Masonry mortar
BS EN 999:1998+A1:2008. Safety of machinery. The positioning of protective equipment in respect of approach speeds of parts of the human body
BS EN ISO 1:2002. Geometrical product specifications (GPS). Standard reference temperature for geometrical product specification and verification
BS EN ISO 10007:1997. Quality management. Guidelines for configuration management
BS EN ISO 10012:2003. Measurement management systems. Requirements for measurement processes and measuring equipment
BS EN ISO 10042:2005. Welding. Arc-welded joints in aluminium and its alloys. Quality levels for imperfections
BS EN ISO 10052:2004+A1:2010. Acoustics. Field measurements of airborne and impact sound insulation and of service equipment sound. Survey method
BS EN ISO 10058:1996. Magnesites and dolomites. Chemical analysis
BS EN ISO 10058-1:2008. Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method)Apparatus, reagents, dissolution and determination of gravimetric silica
BS EN ISO 10058-2:2008. Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method)Wet chemical analysis
BS EN ISO 10058-3:2008. Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method)Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
BS EN ISO 10062:1995. Corrosion test in artificial atmospheres at very low concentrations of polluting gas(es)
BS EN ISO 10062:2008. Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
BS EN ISO 10066:1998. Flexible cellular polymeric materials. Determination of creep in compression
BS EN ISO 10075-1:2000. Ergonomic principles related to mental workloadGeneral terms and definitions (ISO 10075:1991)
BS EN ISO 10075-2:2000. Ergonomic principles related to mental workloadDesign principles
BS EN ISO 10075-3:2004. Ergonomic principles related to mental workloadPrinciples and requirements concerning methods for measuring and assessing mental workload
BS EN ISO 10077-1:2000. Thermal performance of windows, doors and shutters. Calculation of thermal transmittanceSimplified method
BS EN ISO 10077-1:2006. Thermal performance of windows, doors and shutters. Calculation of thermal transmittanceGeneral
BS EN ISO 10077-2:2003. Thermal performance of windows, doors and shutters. Calculation of thermal transmittanceNumerical method for frames
BS EN ISO 10077-2:2012. Thermal performance of windows, doors and shutters. Calculation of thermal transmittanceNumerical method for frames
BS EN ISO 10079-1:1997, BS 5724-2.28. Medical suction equipmentElectrically powered suction equipment. Safety requirements
BS EN ISO 10079-1:2000, BS 5724-2.28:2000. Medical suction equipmentElectrically powered suction equipment. Safety requirements
BS EN ISO 10079-1:2009. Medical suction equipmentElectrically powered suction equipment. Safety requirements (ISO 10079-1:1999)
BS EN ISO 10079-2:1997, BS 7259-1:1993. Medical suction equipmentManually powered suction equipment
BS EN ISO 10079-2:2000. Medical suction equipmentManually powered suction equipment
BS EN ISO 10079-2:2009. Medical suction equipmentManually powered suction equipment
BS EN ISO 10079-3:1997, BS 7259-2:1993. Medical suction equipmentSuction equipment powered from vacuum or pressure source
BS EN ISO 10079-3:2000. Medical suction equipmentSuction equipment powered from a vacuum or pressure source
BS EN ISO 10079-3:2009. Medical suction equipmentSuction equipment powered from a vacuum or pressure source
BS EN ISO 10081-1:2005. Classification of dense shaped refractory productsAlumina-silica
BS EN ISO 10081-2:2005. Classification of dense shaped refractory productsBasic products containing less than 7 % residual carbon
BS EN ISO 10081-3:2005. Classification of dense shaped refractory productsBasic products containing from 7% to 50% residual carbon
BS EN ISO 10082:1996. Plastics. Phenolic resins. Definitions and test methods
BS EN ISO 10082:2000. Plastics. Phenolic resins. Classification and test methods
BS EN ISO 10087:1996. Small craft. Hull identification. Coding system
BS EN ISO 10087:2006. Small craft. Craft identification. Coding system
BS EN ISO 10088:2001. Small craft. Permanently installed fuel systems and fixed fuel tanks
BS EN ISO 10088:2009. Small craft. Permanently installed fuel systems
BS EN ISO 10088:2013. Small craft. Permanently installed fuel systems
BS EN ISO 10093:1999. Plastics. Fire tests. Standard ignition sources
BS EN ISO 10101-1:1998. Natural gas. Determination of water by the Karl Fischer methodIntroduction
BS EN ISO 10101-2:1998. Natural gas. Determination of water by the Karl Fischer methodTitration procedure
BS EN ISO 10101-3:1998. Natural gas. Determination of water by the Karl Fischer methodCoulometric procedure
BS EN ISO 10111:2002. Metallic and other inorganic coatings. Measurement of mass per unit area. Review of gravimetric and chemical analysis methods
BS EN ISO 10121-2:2013. Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilationGas-phase air cleaning devices (GPACD)
BS EN ISO 10133:2001. Small craft. Electrical systems. Extra-low-voltage d.c. installations
BS EN ISO 10133:2012. Small craft. Electrical systems. Extra-low-voltage d.c. installations
BS EN ISO 10135:2009. Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD)
BS EN ISO 10139-1:2005. Dentistry. Soft lining materials for removable denturesMaterials for short-term use
BS EN ISO 10139-2:2001. Dentistry. Soft lining materials for removable denturesMaterials for long-term use
BS EN ISO 10139-2:2009. Dentistry. Soft lining materials for removable denturesMaterials for long-term use
BS EN ISO 10140-1:2010+A1:2012. Acoustics. Laboratory measurement of sound insulation of building elementsApplication rules for specific products
BS EN ISO 10140-2:2010. Acoustics. Laboratory measurement of sound insulation of building elementsMeasurement of airborne sound insulation
BS EN ISO 10140-3:2010. Acoustics. Laboratory measurement of sound insulation of building elementsMeasurement of impact sound insulation
BS EN ISO 10140-4:2010. Acoustics. Laboratory measurement of sound insulation of building elementsMeasurement procedures and requirements
BS EN ISO 10140-5:2010. Acoustics. Laboratory measurement of sound insulation of building elementsRequirements for test facilities and equipment
BS EN ISO 10147:2012. Pipes and fittings made of crosslinked polyethylene (PE-X). Estimation of the degree of crosslinking by determination of the gel content
BS EN ISO 10156:2010. Gases and gas mixtures. Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
BS EN ISO 10156-2:2005. Gas cylinders. Gases and gas mixturesDetermination of oxidizing ability of toxic and corrosive gases and gas mixtures
BS EN ISO 10202-3:1998. Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cardsCryptographic key relationships
BS EN ISO 10202-6:1996. Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cardsCardholder verification
BS EN ISO 10209:2012. Technical product documentation. Vocabulary. Terms relating to technical drawings, product definition and related documentation
BS EN ISO 10209-2:1996, BS 308-1.7:1996. Technical product documentation. VocabularyTerms relating to projection methods
BS EN ISO 10211:2007. Thermal bridges in building construction. Heat flows and surface temperatures. Detailed calculations
BS EN ISO 10211-1:1996. Thermal bridges in building construction. Heat flows and surface temperaturesGeneral calculation methods
BS EN ISO 10211-2:2001. Thermal bridges in building construction. Heat flows and surface temperaturesLinear thermal bridges
BS EN ISO 10215:2010. Anodizing of aluminium and its alloys. Visual determination of image clarity of anodic oxidation coatings. Chart scale method
BS EN ISO 10218-1:2006. Robots for industrial environments. Safety requirementsRobot
BS EN ISO 10218-1:2008. Robots for industrial environments. Safety requirementsRobot
BS EN ISO 10218-1:2011. Robots and robotic devices. Safety requirements for industrial robotsRobots
BS EN ISO 10218-2:2011. Robots and robotic devices. Safety requirements for industrial robotsRobot systems and integration
BS EN ISO 10239:2000. Small craft. Liquified petroleum gas (LPG) systems
BS EN ISO 10239:2008. Small craft. Liquefied petroleum gas (LPG) systems
BS EN ISO 10240:1996. Small craft. Owner's manual
BS EN ISO 10240:2004. Small craft. Owner's manual
BS EN ISO 10248:2000. Fluid fertilizers. De-aeration of suspension samples by film disentrainment
BS EN ISO 10249:2000. Fluid fertilizers. Preliminary visual examination and preparation of samples for physical testing
BS EN ISO 10253:1998, BS 6068-5.22:1998. Water quality. Marine algal growth inhibition test with Skeletonema costatum and Phaeodactylum tricornutum
BS EN ISO 10253:2006. Water quality. Marine algal growth inhibition test with Skeletonema costatum and Phaeodactylum tricornutum
BS EN ISO 10256:2003. Head and face protection for use in ice hockey
BS EN ISO 10270:2008. Corrosion of metals and alloys. Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
BS EN ISO 10271:2001. Dental metallic materials. Corrosion test methods
BS EN ISO 10271:2011. Dentistry. Corrosion test methods for metallic materials
BS EN ISO 10272-1:2006. Microbiology of food and animal feeding stuffs. Horizontal method for detection and enumeration of Campylobacter sppDetection method
BS EN ISO 10273:2003. Microbiology of food and animal feeding stuffs. Horizontal method for the detection of presumptive pathogenic Yersinia enterocolitica
BS EN ISO 10280:1995. Steel and iron. Determination of titanium content. Diantipyrylmethane spectrophotometric method
BS EN ISO 10283:2006. Binders for paintsDetermination of monomeric diisocyanates in polyisocyanate resins
BS EN ISO 10283:2007. Binders for paints and varnishes. Determination of monomeric diisocyanates in isocyanate resins
BS EN ISO 10286:2007. Gas cylinders. Terminology
BS EN ISO 10289:2001. Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates. Rating of test specimens and manufactured articles subjected to corrosion tests
BS EN ISO 10297:2006. Transportable gas cylinders. Cylinder valves. Specification and type testing
BS EN ISO 10301:1997, BS 6068-2.58:1997. Water quality. Determination of highly volatile halogenated hydrocarbons. Gas-chromatographic methods
BS EN ISO 10303-210:2002 (CD-ROM). Industrial automation systems and integration. Product data representation and exchangeApplication protocol. Electronic assembly, interconnection, and packaging design
BS EN ISO 10303-210:2002 (covers). Industrial automation systems and integration. Product data representation and exchangeApplication protocol. Electronic assembly, interconnection, and packaging design
BS EN ISO 10303-210:2002. Industrial automation systems and integration. Product data representation and exchangeApplication protocol. Electronic assembly, interconnection, and packaging design
BS EN ISO 10304-1:1995, BS 6068-2.46:1995. Water quality. Determination of dissolved anions by liquid chromatography of ionsDetermination of fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions. Method for water with low contamination
BS EN ISO 10304-1:2009. Water quality. Determination of dissolved anions by liquid chromatography of ionsDetermination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
BS EN ISO 10304-2:1997, BS 6068-2.53:1997. Water quality. Determination of dissolved anions by liquid chromatography of ionsDetermination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water
BS EN ISO 10304-3:1997, BS 6068-2.59:1997. Water quality. Determination of dissolved anions by liquid chromatography of ionsDetermination of chromate, iodide, sulfite, thiocyanate and thiosulfate
BS EN ISO 10304-4:2000, BS 6068-2.66:1999. Water quality. Determination of dissolved anions by liquid chromatography of ionsDetermination of dissolved chlorate, chloride and chlorite in water with low contamination
BS EN ISO 10306:1995. Textiles. Cotton fibres. Evaluation of maturity by the air flow method
BS EN ISO 10308:1997. Metallic coatings. Review of porosity tests
BS EN ISO 10308:2006. Metallic coatings. Review of porosity tests
BS EN ISO 10318:2005. Geosynthetics. Terms and definitions
BS EN ISO 10319:1996, ISO 10319:1993. Geotextiles. Wide-width tensile test
BS EN ISO 10319:2008. Geosynthetics. Wide-width tensile test
BS EN ISO 10320:1999. Geotextiles and geotextile-related products. Identification on site
BS EN ISO 10321:1996, ISO 10321:1992. Geotextiles. Tensile test for joints/seams by wide-width method
BS EN ISO 10321:2008. Geosynthetics. Tensile test for joints/seams by wide-width strip method
BS EN ISO 10322-1:1997, BS 2738-4:1996. Ophthalmic optics. Semi-finished spectacle lens blanksSpecifications for single-vision and multifocal lens blanks
BS EN ISO 10322-1:2006. Ophthalmic optics. Semi-finished spectacle lens blanksSpecifications for single-vision and multifocal lens blanks
BS EN ISO 10322-2:1997, BS 2738-5:1996. Ophthalmic optics. Semi-finished spectacle lens blanksSpecifications for progressive power lens blanks
BS EN ISO 10322-2:2006. Ophthalmic optics. Semi-finished spectacle lens blanksSpecifications for progressive power lens blanks
BS EN ISO 10323:1996. Dental rotary instruments. Bore diameters for discs and wheels
BS EN ISO 10323:2013. Dentistry. Bore diameters for rotary instruments such as discs and wheels
BS EN ISO 10325:2009. Fibre ropes. High modulus polyethylene. 8-strand braided ropes, 12-strand braided ropes and covered ropes
BS EN ISO 10328:2006. Prosthetics. Structural testing of lower-limb prostheses. Requirements and test methods
BS EN ISO 10338:1998, BS 7208-7:1998. Optics and optical instruments. Contact lenses. Determination of curvature
BS EN ISO 10339:1999, BS 7208-13:1997. Ophthalmic optics. Contact lenses. Determination of water content of hydrogel lenses
BS EN ISO 10340:1997, BS 7208-5:1997. Optics and optical instruments. Contact lenses. Method for determination of solvent extractable substances
BS EN ISO 10341:1999. Ophthalmic instruments. Refractor heads
BS EN ISO 10341:2009. Ophthalmic instruments. Refractor heads
BS EN ISO 10341:2012. Ophthalmic instruments. Refractor heads
BS EN ISO 10342:1999. Ophthalmic instruments. Eye refractometers
BS EN ISO 10342:2003. Ophthalmic instruments. Eye refractometers
BS EN ISO 10342:2010. Ophthalmic instruments. Eye refractometers
BS EN ISO 10343:1999. Ophthalmic instruments. Ophthalmometers
BS EN ISO 10343:2009. Ophthalmic instruments. Ophthalmometers
BS EN ISO 10344:1998, BS 7208-11:1998. Optics and optical instruments. Contact lenses. Saline solution for contact lens testing
BS EN ISO 10350:1995. Plastics. Acquisition and presentation of comparable single-point data
BS EN ISO 10350-1:2001. Plastics. Acquisition and presentation of comparable single-point dataMoulding materials
BS EN ISO 10350-1:2008. Plastics. Acquisition and presentation of comparable single-point dataMoulding materials
BS EN ISO 10350-2:2001. Plastics. Acquisition and presentation of comparable single-point dataLong-fibre-reinforced plastic
BS EN ISO 10350-2:2011. Plastics. Acquisition and presentation of comparable single-point dataLong-fibre-reinforced plastics
BS EN ISO 10352:1997. Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area
BS EN ISO 10352:2010. Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area
BS EN ISO 10360-1:2001. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM)Vocabulary
BS EN ISO 10360-2:1996. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM)Performance assessment of coordinate measuring machines
BS EN ISO 10360-2:2002. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM)CMMs used for measuring size
BS EN ISO 10360-2:2009. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM)CMMs used for measuring linear dimensions
BS EN ISO 10360-3:2001. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM)CMMs with the axis of the rotary table as the fourth axis
BS EN ISO 10360-4:2001. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM)CMMs used in scanning measuring mode
BS EN ISO 10360-5:2001. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM)CMMs using multiple stylus probing systems
BS EN ISO 10360-5:2010. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM)CMMs using single and multiple stylus contacting probing systems
BS EN ISO 10360-6:2001. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM)Estimation of errors in computing Gaussian associated features
BS EN ISO 10360-7:2011. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM)CMMs equipped with imaging probing systems
BS EN ISO 10363:1995. Hot-melt adhesives. Determination of thermal stability
BS EN ISO 10365:1995. Adhesives. Designation of main failure patterns
BS EN ISO 10366-1:1999. Plastics. Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 10366-1:2002. Plastics. Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materialsDesignation system and basis for specifications
BS EN ISO 10366-2:1999. Plastics. Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 10366-2:2003. Plastics. Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materialsPreparation of test specimens and determination of properties
BS EN ISO 10370:1996, BS 2000-398:1996. Petroleum products. Determination of carbon residue. Micro method
BS EN ISO 10374:1998. Freight containers. Automatic identification
BS EN ISO 10380:2003. Pipework. Corrugated metal hoses and hose assemblies
BS EN ISO 10380:2012. Pipework. Corrugated metal hoses and hose assemblies
BS EN ISO 10399:2010. Sensory analysis. Methodology. Duo-trio test
BS EN ISO 10405:2006. Petroleum and natural gas industries. Care and use of casing and tubing
BS EN ISO 10407-2:2008. Petroleum and natural gas industries. Rotary drilling equipmentInspection and classification of used drill stem elements
BS EN ISO 10414-1:2008. Petroleum and natural gas industries. Field testing of drilling fluidsWater-based fluids
BS EN ISO 10414-2:2011. Petroleum and natural gas industries. Field testing of drilling fluidsOil-based fluids
BS EN ISO 10416:2009. Petroleum and natural gas industries. Drilling fluids. Laboratory testing
BS EN ISO 10417:2004. Petroleum and natural gas industries. Subsurface safety valve systems. Design, installation, operation and redress
BS EN ISO 10418:2003. Petroleum and natural gas industries. Offshore production Installations. Analysis, design, installation and testing of basic surface process safety systems
BS EN ISO 1042:2000. Laboratory glassware. One-mark volumetric flasks
BS EN ISO 10423:2001. Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment
BS EN ISO 10423:2004 (CD-ROM)
BS EN ISO 10423:2004 (CD-ROM). Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment
BS EN ISO 10423:2004 (COVERS)
BS EN ISO 10423:2004 (COVERS). Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment
BS EN ISO 10423:2004. Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment (CD-ROM)
BS EN ISO 10423:2009. Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM
BS EN ISO 10424-1:2004. Petroleum and natural gas industries. Rotary drilling equipmentRotary drill stem elements
BS EN ISO 10424-2:2007. Petroleum and natural gas industries. Rotary drilling equipmentThreading and gauging of rotary shouldered thread connections
BS EN ISO 10426-1:2000. Petroleum and natural gas industries. Cements and materials for well cementingSpecification
BS EN ISO 10426-1:2006. Petroleum and natural gas industries. Cements and materials for well cementingSpecification
BS EN ISO 10426-1:2009. Petroleum and natural gas industries. Cements and materials for well cementingSpecification
BS EN ISO 10426-2:2003. Petroleum and natural gas industries. Cements and materials for well cementingTesting of well cements
BS EN ISO 10426-3:2004. Petroleum and natural gas industries. Cements and materials for well cementingTesting of deepwater well cement formulations
BS EN ISO 10426-4:2004. Petroleum and natural gas industries. Cements and materials for well cementingPreparation and testing of foamed cement slurries at atmospheric pressure
BS EN ISO 10426-5:2005. Petroleum and natural gas industries. Cements and materials for well cementingDetermination of shrinkage and expansion of well cement formulations at atmospheric pressure
BS EN ISO 10426-6:2008. Petroleum and natural gas industries. Cements and materials for well cementingMethods for determining the static gel strength of cement formulations (ISO 10426-6:2008)
BS EN ISO 10427-1:2002. Petroleum and natural gas industries. Casing centralizersBow-spring casing centralizers
BS EN ISO 10427-2:2004. Petroleum and natural gas industries. Equipment for well cementingCentralizer placement and stop-collar testing
BS EN ISO 10427-3:2004. Petroleum and natural gas industries. Equipment for well cementingPerformance testing of cementing float equipment
BS EN ISO 1043-1:1999. Plastics. Symbols and abbreviated termsBasic polymers and their special characteristics
BS EN ISO 1043-1:2002. Plastics. Symbols and abbreviated termsBasic polymers and their special characteristics
BS EN ISO 1043-1:2011. Plastics. Symbols and abbreviated termsBasic polymers and their special characteristics
BS EN ISO 10432:2000. Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment
BS EN ISO 1043-2:2001. Fillers and reinforcing materials
BS EN ISO 10432:2004. Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment
BS EN ISO 1043-2:2011. Plastics. Symbols and abbreviated termsFillers and reinforcing materials
BS EN ISO 1043-3:1999. Plastics. Symbols and abbreviated termsPlasticizers
BS EN ISO 1043-4:1999. Plastics. Symbols and abbreviated termsFlame retardants
BS EN ISO 10434:2004. Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
BS EN ISO 10437:2003. Petroleum, petrochemical and natural gas industries. Steam turbines. Special-purpose applications
BS EN ISO 10438-1:2003. Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliariesGeneral requirements
BS EN ISO 10438-1:2007. Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliariesGeneral requirements
BS EN ISO 10438-2:2003. Petroleum and natural gas industries. Lubrication, shaft sealing and control oil systems and auxiliariesSpecial purpose oil systems
BS EN ISO 10438-2:2007. Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliariesSpecial-purpose oil systems
BS EN ISO 10438-3:2003. Petroleum, petrochemical and natural gas industries. Lubrication, shaft sealing and control oil systems and auxilliariesGeneral-purpose oil systems
BS EN ISO 10438-3:2007. Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliariesGeneral-purpose oil systems
BS EN ISO 10438-4:2003. Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliariesSelf-acting gas seal support systems
BS EN ISO 10438-4:2007. Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliariesSelf-acting gas seal support systems
BS EN ISO 10439:2002. Petroleum, chemical and gas service industries. Centrifugal compressors
BS EN ISO 10440-1:2001. Petroleum and natural gas industries. Rotary-type positive-displacement compressorsProcess compressors (oil-free)
BS EN ISO 10440-1:2007. Petroleum, petrochemical and natural gas industries. Rotary-type positive-displacement compressorsProcess compressors
BS EN ISO 10440-2:2001. Petroleum and natural gas industries. Rotary-type positive-displacement compressorsPackaged air compressors (oil-free)
BS EN ISO 10441:1999. Petroleum and natural gas industries. Flexible couplings for mechanical power transmission. Special purpose applications
BS EN ISO 10441:2007. Petroleum, petrochemical and natural gas industries. Flexible couplings for mechanical power transmission. Special-purpose applications
BS EN ISO 10442:2002. Petroleum, chemical and gas service industries. Packaged, integrally geared centrifugal air compressors
BS EN ISO 10447:2007. Resistance welding. Peel and chisel testing of resistance spot and projection welds
BS EN ISO 10451:2002. Dental implant systems. Contents of technical file
BS EN ISO 10451:2002. Dental implant systems. Contents of technical file
BS EN ISO 10451:2010. Dentistry. Contents of technical file for dental implant systems
BS EN ISO 10456:2000. Building materials and products. Procedures for determining declared and design thermal values
BS EN ISO 10456:2007. Building materials and products. Hygrothermal properties. Tabulated design values and procedures for determining declared and design thermal values
BS EN ISO 10472-1:1998. Safety requirements for industrial laundry machineryCommon requirements
BS EN ISO 10472-1:2008. Safety requirements for industrial laundry machineryCommon requirements
BS EN ISO 10472-2:1998. Safety requirements for industrial laundry machineryWashing machines and washer-extractors
BS EN ISO 10472-2:2008. Safety requirements for industrial laundry machineryWashing machines and washer-extractors
BS EN ISO 10472-3:1998. Safety requirements for industrial laundry machineryWashing tunnel lines including component machines
BS EN ISO 10472-3:2008. Safety requirements for industrial laundry machineryWashing tunnel lines including component machines
BS EN ISO 10472-4:1998. Safety requirements for industrial laundry machineryAir dryers
BS EN ISO 10472-4:2008. Safety requirements for industrial laundry machineryAir dryers
BS EN ISO 10472-5:1998. Safety requirements for industrial laundry machineryFlatwork ironers, feeders and folders
BS EN ISO 10472-5:2008. Safety requirements for industrial laundry machineryFlatwork ironers, feeders and folders
BS EN ISO 10472-6:1998. Safety requirements for industrial laundry machineryIroning and fusing presses
BS EN ISO 10472-6:2008. Safety requirements for industrial laundry machineryIroning and fusing presses
BS EN ISO 10477:1996. Dentistry. Polymer-based crown and bridge materials
BS EN ISO 10477:2004. Dentistry. Polymer-based crown and bridge materials
BS EN ISO 10484:2004. Widening test on nuts
BS EN ISO 10485:2004. Cone proof load test on nuts
BS EN ISO 10497:2004. Testing of valves. Fire type-testing requirements
BS EN ISO 10497:2010. Testing of valves. Fire type-testing requirements
BS EN ISO 10504:2000. Starch derivatives. Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups. Method using high-performance liquid chromatography
BS EN ISO 10510:2000. Tapping screw and washer assemblies with plain washers
BS EN ISO 10510:2011. Tapping screw and washer assemblies with plain washers