服务搜索 SEARCH
产品详情
BS EN标准翻译 - 中文版 5
TECERT标准翻译部凭藉我们对标准技术法规的专业理解,竭诚为您提供BS/BS EN中文标准翻译服务。联系我们:info@tecert.com。

BS EN 1503-1:2000. Valves. Materials for bodies, bonnets and coversSteels specified in European Standards
BS EN 15031:2006. Chemicals used for treatment of swimming pool water. Aluminium based coagulants
BS EN 15031:2013. Chemicals used for treatment of swimming pool water. Aluminium based coagulants
BS EN 1503-2:2000. Valves. Materials for bodies, bonnets and coversSteels other than those specified in European Standards
BS EN 15032:2006+A1:2008. Chemicals used for treatment of swimming pool water. Trichloroisocyanuric acid
BS EN 1503-3:2000. Valves. Materials for bodies, bonnets and coversCast irons specified in European Standards
BS EN 15033:2006. Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats
BS EN 1503-4:2002. Valves. Materials for bodies, bonnets and coversCopper alloys specified in European Standards
BS EN 15034:2006. Heating boilers. Condensing heating boilers for fuel oil
BS EN 15035:2006. Heating boilers. Special requirements for oil fired room sealed units up to 70 kW
BS EN 15036-1:2006. Heating boilers. Test regulations for airborne noise emissions from heat generatorsAirborne noise emissions from heat generators
BS EN 15036-2:2006. Heating boilers. Test regulations for airborne noise emissions from heat generatorsFlue gas noise emissions at the outlet of the heat generator
BS EN 15037-1:2008. Precast concrete products. Beam-and-block floor systemsBeams
BS EN 15037-2:2009+A1:2011. Precast concrete products. Beam-and-block floor systemsConcrete blocks
BS EN 15037-3:2009+A1:2011. Precast concrete products. Beam-and-block floor systemsClay blocks
BS EN 15037-4:2010+A1:2013. Precast concrete products. Beam-and-block floor systemsExpanded polystyrene blocks
BS EN 15037-5:2013. Precast concrete products. Beam-and-block floor systemsLightweight blocks for simple formwork
BS EN 15038:2006. Translation services. Service requirements
BS EN 15039:2006. Chemicals used for treatment of water intended for human consumption. Antiscalants for membranes. Polycarboxilic acids and salts
BS EN 15040:2006. Chemicals used for treatment of water intended for human consumption. Antiscalants for membranes. Phosphonic acids and salts
BS EN 1504-1:1998. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity.Definitions
BS EN 1504-1:2005. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformityDefinitions
BS EN 15041:2006. Chemicals used for treatment of water intended for human consumption. Antiscalants for membranes. Polyphosphates
BS EN 1504-10:2003. Products and systems for the protection and repair of concrete structures. Definitions. Requirements. Quality control and evaluation of conformitySite application of products and systems and quality control of the works
BS EN 1504-2:2004. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformitySurface protection systems for concrete
BS EN 15042-1:2006. Thickness measurement of coatings and characterization of surfaces with surface wavesGuide to the determination of elastic constants, density and thickness of films by laser induced surface acoustic waves
BS EN 15042-2:2006. Thickness measurement of coatings and characterization of surfaces with surface wavesGuide to the thickness measurement of coatings by photothermic method
BS EN 1504-3:2005. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformityStructural and non-structural repair
BS EN 1504-4:2004. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformityStructural bonding
BS EN 1504-5:2004. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformityConcrete injection
BS EN 1504-5:2013. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformityConcrete injection
BS EN 1504-6:2006. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformityAnchoring of reinforcing steel bar
BS EN 1504-7:2006. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformityReinforcement corrosion protection
BS EN 1504-8:2004. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformityQuality control and evaluation of conformity
BS EN 15048-1:2007. Non-preloaded structural bolting assembliesGeneral requirements
BS EN 15048-2:2007. Non-preloaded structural bolting assembliesSuitability test
BS EN 15049:2007. Railway applications. Suspension components. Torsion bar, steel
BS EN 1504-9:2008. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformityGeneral principles for use of products and systems
BS EN 1505:1998. Ventilation for buildings. Sheet metal air ducts and fittings with rectangular cross-section. Dimensions
BS EN 15050:2007+A1:2012. Precast concrete products. Bridge elements
BS EN 15051:2006. Workplace atmospheres. Measurement of the dustiness of bulk materials. Requirements and reference test methods
BS EN 15054:2006. Non fatty foods. Determination of chlormequat and mepiquat. LC-MS method
BS EN 15055:2006. Non fatty foods. Determination of chlormequat and mepiquat. LC-MS/MS method
BS EN 15056:2006+A1:2009. Cranes. Requirements for container handling spreaders
BS EN 15057:2006. Fibre cement profiled sheets. Impact resistance test method
BS EN 15058:2006. Stationary source emissions. Determination of the mass concentration of carbon monoxide (CO). Reference method: non-dispersive infrared spectrometry
BS EN 15059:2009. Snow grooming equipment. Safety requirements
BS EN 1506:1998. Ventilation for buildings. Sheet metal air ducts and fittings with circular cross section. Dimensions
BS EN 1506:2007. Ventilation for buildings. Sheet metal air ducts and fittings with circular cross-section. Dimensions
BS EN 15060:2006. Paints and varnishes. Guide for the classification and selection of coating systems for wood based materials in furniture for interior use
BS EN 15061:2007+A1:2008. Safety of machinery. Safety requirements for strip processing line machinery and equipment
BS EN 15062:2006. Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing ageing of bonds under specified conditions
BS EN 15063-1:2006. Copper and copper alloys. Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF)Guidelines to the routine method
BS EN 15063-2:2006. Copper and copper alloys. Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF)Routine method
BS EN 15067:2007. Plastics and rubber machines. Film converting machines for bags and sacks. Safety requirements
BS EN 15069:2008. Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
BS EN 1507:2006. Ventilation for buildings. Sheet metal air ducts with rectangular section. Requirements for strength and leakage
BS EN 15072:2006+A1:2008. Chemicals used for treatment of swimming pool water. Sodium dichloroisocyanurate, anhydrous
BS EN 15072:2013. Chemicals used for treatment of swimming pool water. Sodium dichloroisocyanurate, anhydrous
BS EN 15073:2006+A1:2008. Chemicals used for treatment of swimming pool water. Sodium dichloroisocyanurate, dihydrate
BS EN 15073:2013. Chemicals used for treatment of swimming pool water. Sodium dichloroisocyanurate, dihydrate
BS EN 15074:2006. Chemicals used for treatment of swimming pool water. Ozone
BS EN 15075:2006. Chemicals used for treatment of swimming pool water. Sodium hydrogen carbonate
BS EN 15075:2013. Chemicals used for treatment of swimming pool water. Sodium hydrogen carbonate
BS EN 15076:2006. Chemicals used for treatment of swimming pool water. Sodium hydroxide
BS EN 15076:2013. Chemicals used for treatment of swimming pool water. Sodium hydroxide
BS EN 15077:2006. Chemicals used for treatment of swimming pool water. Sodium hypochlorite
BS EN 15077:2013. Chemicals used for treatment of swimming pool water. Sodium hypochlorite
BS EN 15078:2006. Chemicals used for treatment of swimming pool water. Sulfuric acid
BS EN 15078:2013. Chemicals used for treatment of swimming pool water. Sulfuric acid
BS EN 15079:2007. Copper and copper alloys. Analysis by spark source optical emission spectrometry (S-OES)
BS EN 1508:1999. Water supply. Requirements for systems and components for the storage of water
BS EN 15080-12:2011. Extended application of results from fire resistance testsLoadbearing masonry walls
BS EN 15080-8:2009. Extended application of results from fire resistance testsBeams
BS EN 15081:2007. Industrial valves. Mounting kits for part-turn valve actuator attachment
BS EN 15085-1:2007+A1:2013. Railway applications. Welding of railway vehicles and componentsGeneral
BS EN 15085-2:2007. Railway applications. Welding of railway vehicles and componentsQuality requirements and certification of welding manufacturer
BS EN 15085-3:2007. Railway applications. Welding of railway vehicles and componentsDesign requirements
BS EN 15085-4:2007. Railway applications. Welding of railway vehicles and componentsProduction requirements
BS EN 15085-5:2007. Railway applications. Welding of railway vehicles and componentsInspection, testing and documentation
BS EN 15086:2006. Foodstuffs. Determination of isomalt, lactitol, maltitol, mannitol, sorbitol and xylitol in foodstuffs
BS EN 15088:2005. Aluminium and aluminium alloys. Structural products for construction works. Technical conditions for inspection and delivery
BS EN 15089:2009. Explosion isolation systems
BS EN 1509:1997. Playing field equipment. Badminton equipment. Functional and safety requirements, test methods
BS EN 1509:2004. Playing field equipment. Badminton equipment. Functional and safety requirements, test methods
BS EN 1509:2008. Playing field equipment. Badminton equipment. Functional and safety requirements, test methods
BS EN 15090:2006. Footwear for firefighters
BS EN 15090:2012. Footwear for firefighters
BS EN 15091:2006. Sanitary tapware. Electronic opening and closing sanitary tapware
BS EN 15092:2008. Building valves. Inline hot water supply tempering valves. Tests and requirements
BS EN 15093:2008. Safety of machinery. Safety requirements for hot flat rolling mills
BS EN 15094:2008. Safety of machinery. Safety requirements for cold flat rolling mills
BS EN 15095:2007+A1:2008. Power-operated mobile racking and shelving, carousels and storage lifts. Safety requirements
BS EN 15096:2008. Devices to prevent pollution by backflow of potable water. Hose Union anti-vacuum valves. DN 15 to DN 25 inclusive Family H, type B and type D. General technical specification
BS EN 15097:2006. Irrigation techniques. Localised irrigation. Hydraulic evaluation
BS EN 15099-1:2007. Irrigation techniques. Remote monitoring and control for irrigation systemsGeneral considerations
BS EN 1510:1997. Playing field equipment. Tennis equipment. Functional and safety requirements, test methods
BS EN 1510:2004. Playing field equipment. Tennis equipment. Functional and safety requirements, test methods
BS EN 15101-1:2013. Thermal insulation products for buildings. In-situ formed loose fill cellulose (LFCI) productsSpecification for the products before installation
BS EN 15101-2:2013. Thermal insulation products for buildings. In-situ formed loose fill cellulose (LFCI) productsSpecification for the installed products
BS EN 15102:2007+A1:2011. Decorative wall coverings. Roll and panel form
BS EN 15103:2009. Solid biofuels. Determination of bulk density
BS EN 15104:2011. Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen. Instrumental methods
BS EN 15105:2011. Solid biofuels. Determination of the water soluble chloride, sodium and potassium content
BS EN 15109:2006. Surface active agents. Determination of the active matter content of alkylamidopropylbetaines
BS EN 15110:2006, BS 6068-5.41:2006. Water quality. Guidance standard for the sampling of zooplankton from standing waters
BS EN 15111:2007. Foodstuffs. Determination of trace elements. Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry)
BS EN 15112:2006. External cathodic protection of well casing
BS EN 15114:2006+A1:2008. Textile floor coverings. Classification of textile floor coverings without pile
BS EN 15115:2006. Textile floor coverings. Determination of sensitivity to spilled water
BS EN 15116:2008. Ventilation in buildings. Chilled beams. Testing and rating of active chilled beams
BS EN 15129:2009. Anti-seismic devices
BS EN 15132:2006. Container shells for mobile waste containers with a capacity up to 1700 l. Performance requirements and test methods
BS EN 15136:2006. Materials and articles in contact with foodstuffs. Certain epoxy derivatives subject to limitation. Determination of BADGE, BFDGE and their hydroxy and chlorinated derivatives in food simulants
BS EN 15137:2006. Materials and articles in contact with foodstuffs. Certain epoxy derivatives subject to limitation. Determination of NOGE and its hydroxy and chlorinated derivatives
BS EN 15140:2006. Public passenger transport. Basic requirements and recommendations for systems that measure delivered service quality
BS EN 1514-1:1997. Flanges and their joints. Dimensions of gaskets for PN-designated flangesNon-metallic flat gaskets with or without inserts
BS EN 1514-2:1997. Flanges and their joints. Dimensions of gaskets for PN-designated flangesSpiral wound gaskets for use with steel flanges
BS EN 1514-2:2005. Flanges and their joints. Dimensions of gaskets for PN-designated flangesSpiral wound gaskets for use with steel flanges
BS EN 1514-3:1997. Flanges and their joints. Dimensions of gaskets for PN-designated flangesNon-metallic PTFE envelope gaskets
BS EN 1514-4:1997. Flanges and their joints. Dimensions of gaskets for PN-designated flangesCorrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges
BS EN 15144:2007. Winter maintenance equipment. Terminology. Terms for winter maintenance
BS EN 1514-6:2003. Flanges and their joints. Dimensions of gaskets for PN-designated flangesCovered serrated metal gaskets for use with steel flanges
BS EN 15146:2006. Solid softwood panelling and cladding. Machined profiles without tongue and groove
BS EN 1514-8:2004. Flanges and their joints. Dimensions of gaskets for PN-designated flangesPolymeric O-Ring gaskets for grooved flanges
BS EN 15148:2009. Solid biofuels. Determination of the content of volatile matter
BS EN 15149-1:2010. Solid biofuels. Determination of particle size distributionOscillating screen method using sieve apertures of 1 mm and above
BS EN 15149-2:2010. Solid biofuels. Determination of particle size distributionVibrating screen method using sieve apertures of 3,15 mm and below
BS EN 15150:2011. Solid biofuels. Determination of particle density
BS EN 1515-1:2000. Flanges and their joints. BoltingSelection of bolting
BS EN 15151-1:2012. Mountaineering equipment. Braking devicesBraking devices with manually assisted locking, safety requirements and test methods
BS EN 15151-2:2012. Mountaineering equipment. Braking devicesManual braking devices, safety requirements and test methods
BS EN 1515-2:2001. Flanges and their joints. BoltingClassification of bolt materials for steel flanges, PN designated
BS EN 15152:2007. Railway applications. Front windscreens for train cabs
BS EN 1515-3:2005. Flanges and their joints. BoltingClassification of bolt materials for steel flanges, class designated
BS EN 15153-1:2007. Railway applications. External visible and audible warning devices for high speed trainsHead, marker and tail lamps
BS EN 15153-1:2013. Railway applications. External visible and audible warning devices for trainsHead, marker and tail lamps
BS EN 15153-2:2007. Railway applications. External visible and audible warning devices for high speed trainsWarning horns
BS EN 15153-2:2013. Railway applications. External visible and audible warning devices for trainsWarning horns
BS EN 1515-4:2009. Flanges and their joints. BoltingSelection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
BS EN 15154-1:2006. Emergency safety showersPlumbed-in body showers for laboratories
BS EN 15154-2:2006. Emergency safety showersPlumbed-in eye wash units
BS EN 15154-3:2009. Emergency safety showersNon plumbed-in body showers
BS EN 15154-4:2009. Emergency safety showersNon plumbed-in eyewash units
BS EN 15156:2006. Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of fatigue properties at constant amplitude
BS EN 15157:2006. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of fatigue properties at constant amplitude
BS EN 15158:2006. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of fatigue properties at constant amplitude
BS EN 15159-1:2006. Vitreous and porcelain enamels. Glass-lined apparatus for process plantsQuality requirements for apparatus, components, appliances and accessories
BS EN 15159-2:2006. Vitreous and porcelain enamels. Glass-lined apparatus for process plantsDesignation and specification of resistance to chemical attack and thermal shock
BS EN 15159-3:2006. Vitreous and porcelain enamels. Glass-lined apparatus for process plantsThermal shock resistance
BS EN 1516:1999. Surfaces for sports areas. Determination of resistance to indentation
BS EN 15161:2006. Water conditioning equipment inside buildings. Installation, operation, maintenance and repair
BS EN 15162:2008. Machines and plants for mining and tooling of natural stone. Safety requirements for gang saws
BS EN 15163:2008. Machines and installations for the exploitation and processing of natural stone. Safety. Requirements for diamond wire saws
BS EN 15164:2008. Machines and plants for mining and tooling of natural stone. Safety. Requirements for chain- and belt-slotting machines
BS EN 15166:2008. Food processing machinery. Automatic back splitting machines of butchery carcasses. Safety and hygiene requirements
BS EN 15167-1:2006. Ground granulated blast furnace slag for use in concrete, mortar and groutDefinitions, specifications and conformity criteria
BS EN 15167-2:2006. Ground granulated blast furnace slag for use in concrete, mortar and groutConformity evaluation
BS EN 15168:2006. Surface active agents. Determination of hydroxyl value. p-Toluensulfonyl isocyanate (TSI) method and potentiometric titration with tetrabutylammonium hydroxide
BS EN 15169:2007. Characterization of waste. Determination of loss on ignition in waste, sludge and sediments
BS EN 1517:2000. Surfaces for sports areas. Determination of resistance to impact
BS EN 15170:2008. Characterization of sludges. Determination of calorific value
BS EN 15178:2007. Elements for the identification of products in emergency enquiries
BS EN 15179:2007. Railway applications. Braking. Requirements for the brake system of coaches
BS EN 1518:1998. Non-destructive testing. Leak testing. Characterization of mass spectrometer leak detectors
BS EN 15181:2008. Measuring method of the energy consumption of gas fired ovens
BS EN 15182-1:2007+A1:2009. Hand-held branchpipes for fire service useCommon requirements
BS EN 15182-2:2007+A1:2009. Hand-held branch pipes for fire service useCombination branch pipes, PN 16
BS EN 15182-3:2007+A1:2009. Hand-held branch pipes for fire service useSmooth bore jet and/or one fixed spray jet angle branch pipes PN 16
BS EN 15182-4:2007+A1:2009. Hand-held branch pipes for fire service useHigh pressure branch pipes PN 16
BS EN 15183:2006. Products and systems for the protection and repair of concrete structures. Test methods. Corrosion protection test
BS EN 15184:2006. Products and systems for the protection and repair of concrete structures. Test methods. Shear adhesion of coated steel to concrete (pull-out test)
BS EN 15185:2011. Furniture. Assessment of the surface resistance to abrasion
BS EN 15186:2012. Furniture. Assessment of the surface resistance to scratching
BS EN 15187:2006. Furniture. Assessment of the effect of light exposure
BS EN 15188:2007. Determination of the spontaneous ignition behaviour of dust accumulations
BS EN 15189:2006. Ductile iron pipes, fittings and accessories. External polyurethane coating for pipes. Requirements and test methods
BS EN 15190:2007. Structural adhesives. Test methods for assessing long term durability of bonded metallic structures
BS EN 1519-1:2000. Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE)Specifications for pipes, fittings and the system
BS EN 15191:2009. Precast concrete products. Classification of glassfibre reinforced concrete performance
BS EN 15192:2006. Characterisation of waste and soil. Determination of chromium (VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection
BS EN 15193:2007. Energy performance of buildings. Energy requirements for lighting
BS EN 15194:2009+A1:2011. Cycles. Electrically power assisted cycles. EPAC Bicycles
BS EN 15195:2007, BS 2000-498:2007. Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber
BS EN 15196:2006, BS 6068-5.43:2006. Water quality. Guidance on sampling and processing of the pupal exuviae of Chironomidae (Order Diptera) for ecological assessment
BS EN 15197:2007. Wood-based panels. Flaxboards. Specifications
BS EN 15198:2007. Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
BS EN 15199-1:2006, BS 2000-480:2006. Petroleum products. Determination of boiling range distribution by gas chromatography methodMiddle distillates and lubricating base oils
BS EN 15199-2:2006, BS 2000-507:2006. Petroleum products. Determination of boiling range distribution by gas chromatography methodHeavy distillates and residual fuel
BS EN 15199-3:2008. Petroleum products. Determination of boiling range distribution by gas chromatography methodCrude oil
BS EN 152:2011. Wood preservatives. Determination of the protective effectiveness of a preservative treatment against blue stain in wood in service. Laboratory method
BS EN 1520:2002. Prefabricated reinforced components of lightweight aggregate concrete with open structure
BS EN 1520:2011. Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
BS EN 15200:2007. Sanitary appliances. Multifunction shower cabinets
BS EN 15202:2006. LPG equipment and accessories. Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections
BS EN 15202:2012. LPG equipment and accessories. Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections
BS EN 15204:2006. Water quality. Guidance standard on the enumeration of phytoplankton using inverted microscopy (Utermoehl technique)
BS EN 15205:2006. Determination of hexavalent chromium in corrosion protection layers. Qualitative analysis
BS EN 15206:2007. Vitreous and porcelain enamels. Production of specimens for testing enamel on sheet steel, sheet aluminium and cast iron
BS EN 15207:2006. Tanks for transport of dangerous goods. Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage
BS EN 15208:2007. Tanks for transport of dangerous goods. Sealed parcel delivery systems. Working principles and interface specifications
BS EN 1521:1997. Determination of flexural strength of lightweight aggregate concrete with open structure
BS EN 15210-1:2009. Solid biofuels. Determination of mechanical durability of pellets and briquettesPellets
BS EN 15210-2:2010. Solid biofuels. Determination of mechanical durability of pellets and briquettesBriquettes
BS EN 15213-1:2013. Intelligent transport systems. After-theft systems for the recovery of stolen vehiclesReference architecture and terminology
BS EN 15213-2:2013. Intelligent transport systems. After-theft systems for the recovery of stolen vehiclesCommon status message elements
BS EN 15213-3:2013. Intelligent transport systems. After-theft systems for the recovery of stolen vehiclesInterface and system requirements in terms of short range communication system
BS EN 15213-4:2013. Intelligent transport systems. After-theft systems for the recovery of stolen vehiclesInterface and system requirements in terms of long range communication system
BS EN 15213-5:2013. Intelligent transport systems. After-theft systems for the recovery of stolen vehiclesMessaging interface
BS EN 15216:2007. Characterization of waste. Determination of total dissolved solids (TDS) in water and eluates
BS EN 15217:2007. Energy performance of buildings. Methods for expressing energy performance and for energy certification of buildings
BS EN 15218:2006. Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling. Terms, definitions, test conditions, test methods and requirements
BS EN 15218:2013. Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling. Terms, definitions, test conditions, test methods and requirements
BS EN 15219:2006+A1:2007. Water conditioning equipment inside buildings. Nitrate removal devices. Requirements for performance, safety and testing
BS EN 1522:1999. Windows, doors, shutters and blinds. Bullet resistance. Requirements and classification
BS EN 15220-1:2008+A1:2011. Railway applications. Brake indicatorsPneumatically operated brake indicators
BS EN 15221-1:2006. Facility managementTerms and definitions
BS EN 15221-2:2006. Facility managementGuidance on how to prepare facility management agreements
BS EN 15221-3:2011. Facility ManagementGuidance on quality in Facility Management
BS EN 15221-4:2011. Facility managementTaxonomy, classification and structures in facility management
BS EN 15221-5:2011. Facility managementGuidance on facility management processes
BS EN 15221-6:2011. Facility managementArea and space measurement in facility management
BS EN 15221-7:2012. Facility ManagementGuidelines for Performance Benchmarking
BS EN 15224:2012. Health care services. Quality management systems. Requirements based on EN ISO 9001:2008
BS EN 15227:2008+A1:2010. Railway applications. Crashworthiness requirements for railway vehicle bodies
BS EN 15228:2009. Structural timber. Structural timber preservative treated against biological attack
BS EN 1523:1999. Windows, doors, shutters and blinds. Bullet resistance. Test method
BS EN 15232:2007. Energy performance of buildings. Impact of building automation, controls and building management
BS EN 15232:2012. Energy performance of buildings. Impact of Building Automation, Controls and Building Management
BS EN 15233:2007. Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
BS EN 15234-1:2011. Solid biofuels. Fuel quality assuranceGeneral requirements
BS EN 15234-2:2012. Solid biofuels. Fuel quality assuranceWood pellets for non-industrial use
BS EN 15234-3:2012. Solid biofuels. Fuel quality assuranceWood briquettes for non-industrial use
BS EN 15234-4:2012. Solid biofuels. Fuel quality assuranceWood chips for non-industrial use
BS EN 15234-5:2012. Solid biofuels. Fuel quality assuranceFirewood for non-industrial use
BS EN 15234-6:2012. Solid biofuels. Fuel quality assuranceNon-woody pellets for non-industrial use
BS EN 15237:2007. Execution of special geotechnical works. Vertical drainage
BS EN 15238:2006. Soil improvers and growing media. Determination of quantity for materials with particle size greater than 60 mm
BS EN 15239:2007. Ventilation for buildings. Energy performance of buildings. Guidelines for inspection of ventilation systems
BS EN 15240:2007. Ventilation for buildings. Energy performance of buildings. Guidelines for inspection of air-conditioning systems
BS EN 15241:2007. Ventilation for buildings. Calculation methods for energy losses due to ventilation and infiltration in buildings
BS EN 15242:2007. Ventilation for buildings. Calculation methods for the determination of air flow rates in buildings including infiltration
BS EN 15243:2007. Ventilation for buildings. Calculation of room temperatures and of load and energy for buildings with room conditioning systems
BS EN 1525:1998. Safety of industrial trucks. Driverless trucks and their systems
BS EN 15250:2007. Slow heat release appliances fired by solid fuel. Requirements and test methods
BS EN 15251:2007. Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics
BS EN 15254-2:2009. Extended application of results from fire resistance tests. Nonloadbearing wallsMasonry and gypsum blocks
BS EN 15254-4:2008+A1:2011. Extended application of results from fire resistance tests. Non-loadbearing wallsGlazed constructions
BS EN 15254-5:2009. Extended application of results from fire resistance tests. Non-loadbearing wallsMetal sandwich panel construction
BS EN 15254-7:2012. Extended application of results from fire resistance tests. Non-loadbearing ceilingsMetal sandwich panel construction
BS EN 15255:2007. Energy performance of buildings. Sensible room cooling load calculation. General criteria and validation procedures
BS EN 15257:2006. Cathodic protection. Competence levels and certification of cathodic protection personnel
BS EN 15258:2008. Precast concrete products. Retaining wall elements
BS EN 15259:2007. Air quality. Measurement of stationary source emissions. Requirements for measurement sections and sites and for the measurement objective, plan and report
BS EN 1526:1997+A1:2008. Safety of industrial trucks. Additional requirements for automated functions on trucks
BS EN 15265:2007. Energy performance of buildings. Calculation of energy needs for space heating and cooling using dynamic methods. General criteria and validation procedures
BS EN 15266:2007. Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
BS EN 15267-1:2009. Air quality. Certification of automated measuring systemsGeneral principles
BS EN 15267-2:2009. Air quality. Certification of automated measuring systemsInitial assessment of the AMS manufacturer's quality management system and post certification surveillance for the manufacturing process
BS EN 15267-3:2007. Air quality. Certification of automated measuring systemsPerformance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
BS EN 15268:2008. Petrol filling stations. Safety requirements for the construction of submersible pump assemblies
BS EN 15269-1:2010. Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardwareGeneral requirements
BS EN 15269-10:2011. Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardwareFire resistance of steel rolling shutter assemblies
BS EN 15269-2:2012. Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardwareFire resistance of hinged and pivoted steel doorsets
BS EN 15269-20:2009. Extended application of test results for fire resistance and/ or smoke control for door, shutter and openable window assemblies, including their elements of building hardwareSmoke control for hinged and pivoted steel, timber and metal framed glazed doorsets
BS EN 15269-3:2012. Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardwareFire resistance of hinged and pivoted timber doorsets and openable timber framed windows
BS EN 15269-7:2009. Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardwareFire resistance for steel sliding doorsets
BS EN 1527:1998. Building hardware. Hardware for sliding doors and folding doors. Requirements and test methods
BS EN 1527:2013. Building hardware. Hardware for sliding doors and folding doors. Requirements and test methods
BS EN 15270:2007. Pellet burners for small heating boilers. Definitions, requirements, testing, marking
BS EN 15271:2007. Inland navigation vessels. Studless anchor chain. Anchor equipment
BS EN 15272-1:2007. Inland navigation vessels. Equipment for rope leadingGeneral requirements
BS EN 15272-2:2007. Inland navigation vessels. Rope leadingFairlead
BS EN 15272-3:2007. Inland navigation vessels. Equipment for rope leadingRoller fairleads
BS EN 15272-4:2007. Inland navigation vessels. Equipment for rope leadingRope lead
BS EN 15273-1:2009. Railway applications. GaugesGeneral. Common rules for infrastructure and rolling stock
BS EN 15273-1:2013. Railway applications. GaugesGeneral. Common rules for infrastructure and rolling stock
BS EN 15273-2:2009. Railway applications. GaugesRolling stock gauge
BS EN 15273-2:2013. Railway applications. GaugesRolling stock gauge
BS EN 15273-3:2009. Railway applications. GaugesStructure gauges
BS EN 15273-3:2013. Railway applications. GaugesStructure gauges
BS EN 15274:2007. General purpose adhesives for structural assembly. Requirements and test methods
BS EN 15275:2007. Structural adhesives. Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
BS EN 15280:2013. Evaluation of a.c. corrosion likelihood of buried pipelines applicable to cathodically protected pipelines
BS EN 1528-1:1997. Fatty food. Determination of pesticides and polychlorinated biphenyls (PCBs)General
BS EN 1528-2:1997. Fatty food. Determination of pesticides and polychlorinated biphenyls (PCBs)Extraction of fat, pesticides and PCBs, and determination of fat content
BS EN 15282:2007. Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
BS EN 1528-3:1997. Fatty food. Determination of pesticides and polychlorinated biphenyls (PCBs)Clean-up methods
BS EN 15283-1:2008+A1:2009. Gypsum boards with fibrous reinforcement. Definitions, requirements and test methodsGypsum boards with mat reinforcement
BS EN 15283-2:2008+A1:2009. Gypsum boards with fibrous reinforcement. Definitions, requirements and test methodsGypsum fibre boards
BS EN 1528-4:1997. Fatty food. Determination of pesticides and polychlorinated biphenyls (PCBs)Determination, confirmatory tests, miscellaneous
BS EN 15284:2007. Materials and articles in contact with food stuffs. Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastic cookware
BS EN 15285:2008. Agglomerated stone. Modular tiles for flooring and stairs (internal and external)
BS EN 15286:2013. Agglomerated stone. Slabs and tiles for wall finishes (internal and external)
BS EN 15287-1:2007+A1:2010. Chimneys. Design, installation and commissioning of chimneysChimneys for non-roomsealed heating appliances
BS EN 15287-2:2008. Chimneys. Design, installation and commissioning of chimneysChimneys for roomsealed appliances
BS EN 15288-1:2008+A1:2010. Swimming poolsSafety requirements for design
BS EN 15288-2:2008. Swimming poolsSafety requirements for operation
BS EN 15289:2011. Solid biofuels. Determination of total content of sulfur and chlorine
BS EN 1529:2000. Door leaves. Height, width, thickness and squareness. Tolerance classes
BS EN 15290:2011. Solid biofuels. Determination of major elements. Al, Ca, Fe, Mg, P, K, Si, Na and Ti
BS EN 15296:2011. Solid biofuels. Conversion of analytical results from one basis to another
BS EN 15297:2011. Solid biofuels. Determination of minor elements. As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn
BS EN 153:1990. Methods of measuring the energy consumption of electric mains operated household refrigerators, frozen food storage cabinets, food freezers and their combinations, together with associated characteristics
BS EN 153:1996. Methods of measuring the energy consumption of electric mains operated household refrigerators, frozen food storage cabinets, food freezers and their combinations, together with associated characteristics
BS EN 153:2006. Methods of measuring the energy consumption of electric mains operated household refrigerators, frozen food storage cabinets, food freezers and their combinations, together with associated characteristics
BS EN 1530:2000. Door leaves. General and local flatness. Tolerance classes
BS EN 153000:1998. Harmonized system of quality assessment for electronic components. Generic specification: discrete pressure contact power semiconductor devices (qualification approval)
BS EN 15301-1:2007. Surfaces for sports areasDetermination of rotational resistance
BS EN 15301-2:2007. Surfaces for sports areasDetermination of shear strength by dynamic top layer testing of unbound mineral surfaces in the laboratory
BS EN 15302:2008+A1:2010. Railway applications. Method for determining the equivalent conicity
BS EN 15304:2007. Determination of the freeze-thaw resistance of autoclaved aerated concrete
BS EN 15304:2010. Determination of the freeze-thaw resistance of autoclaved aerated concrete
BS EN 15305:2008. Non-destructive testing. Test method for residual stress analysis by X-ray diffraction
BS EN 15306:2007. Surfaces for outdoor sports areas. Exposure of synthetic turf to simulated wear
BS EN 15307:2007. Adhesives for leather and footwear materials. Sole-upper bonds. Minimum strength requirements
BS EN 15308:2008. Characterization of waste. Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection
BS EN 15309:2007. Characterization of waste and soil. Determination of elemental composition by X-ray fluorescence
BS EN 15311:2007. Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions
BS EN 15312:2007+A1:2010. Free access multi-sports equipment. Requirements, including safety, and test methods
BS EN 15313:2010. Railway applications. In-service wheelset operation requirements. In-service and off-vehicle wheelset maintenance
BS EN 15316-1:2007. Heating systems in buildings. Method for calculation of system energy requirements and system efficienciesGeneral
BS EN 15316-2-1:2007. Heating systems in buildings. Method for calculation of system energy requirements and system efficienciesSpace heating emission systems
BS EN 15316-2-3:2007. Heating systems in buildings. Method for calculation of system energy requirements and system efficienciesSpace heating distribution systems
BS EN 15316-3-1:2007. Heating systems in buildings. Method for calculation of system energy requirements and system efficienciesDomestic hot water systems, characterisation of needs (tapping requirements)
BS EN 15316-3-2:2007. Heating systems in buildings. Method for calculation of system energy requirements and system efficienciesDomestic hot water systems, distribution
BS EN 15316-3-3:2007. Heating systems in buildings. Method for calculation of system energy requirements and system efficienciesDomestic hot water systems, generation
BS EN 15316-4-1:2008. Heating systems in buildings. Method for calculation of system energy requirements and system efficienciesSpace heating generation systems, combustion systems (boilers)
BS EN 15316-4-2:2008. Heating systems in buildings. Method for calculation of system energy requirements and system efficienciesSpace heating generation systems, heat pump systems
BS EN 15316-4-3:2007. Heating systems in buildings. Method for calculation of system energy requirements and system efficienciesHeat generation systems, thermal solar systems
BS EN 15316-4-4:2007. Heating systems in buildings. Method for calculation of system energy requirements and system efficienciesHeat generation systems, building-integrated cogeneration systems
BS EN 15316-4-5:2007. Heating systems in buildings. Method for calculation of system energy requirements and system efficienciesSpace heating generation systems, the performance and quality of district heating and large volume systems
BS EN 15316-4-6:2007. Heating systems in buildings. Method for calculation of system energy requirements and system efficienciesHeat generation systems, photovoltaic systems
BS EN 15316-4-7:2008. Heating systems in buildings. Method for calculation of system energy requirements and system efficienciesSpace heating generation systems, biomass combustion systems
BS EN 15316-4-8:2011. Heating systems in buildings. Method for calculation of system energy requirements and system efficienciesSpace heating generation systems, air heating and overhead radiant heating systems
BS EN 15317:2007. Non-destructive testing. Ultrasonic testing. Characterization and verification of ultrasonic thickness measuring equipment
BS EN 15318:2007. Design and application of gypsum blocks
BS EN 15319:2007. General principles of design of fibrous (gypsum) plaster works
BS EN 1532:1997. Installation and equipment for liquefied natural gas. Ship to shore interface
BS EN 15320:2007. Identification card systems. Surface transport applications. Interoperable public transport applications. Framework
BS EN 15322:2009. Bitumen and bituminous binders. Framework for specifying cut-back and fluxed bituminous binders
BS EN 15322:2013. Bitumen and bituminous binders. Framework for specifying cut-back and fluxed bituminous binders
BS EN 15323:2007, BS 2000-551:2007. Bitumen and bituminous binders. Accelerated long-term ageing/conditioning by the rotating cylinder method (RCAT)
BS EN 15326:2007+A1:2009, BS 2000-549:2007. Bitumen and bituminous binders. Measurement of density and specific gravity. Capillary-stoppered pyknometer method
BS EN 15327-1:2008. Railway applications. Passenger alarm subsystemGeneral requirements and passenger interface for the passenger emergency brake system
BS EN 1533:2000. Wood and parquet flooring. Determination of bending properties. Test methods
BS EN 1533:2010. Wood flooring. Determination of bending strength under static load. Test methods
BS EN 15330-1:2007. Surfaces for sports areas. Synthetic turf and needle-punched surfaces primarily designed for outdoor useSpecification for synthetic turf
BS EN 15330-1:2013. Surfaces for sports areas. Synthetic turf and needle-punched surfaces primarily designed for outdoor useSpecification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use
BS EN 15330-2:2008. Surfaces for sports areas. Synthetic turf and needle- punched surfaces primarily designed for outdoor useSpecification for needle-punched surfaces
BS EN 15331:2011. Criteria for design, management and control of maintenance services for buildings
BS EN 15332:2007. Heating boilers. Energy assessment of hot water storage systems
BS EN 15333-1:2008. Respiratory equipment. Open-circuit umbilical supplied compressed gas diving apparatusDemand apparatus
BS EN 15333-2:2009. Respiratory equipment. Open-circuit umbilical supplied compressed gas diving apparatusFree flow apparatus
BS EN 15334:2007. Sanitary appliances. Methacrylic dispersions of high filler content
BS EN 15335:2007. Advanced technical ceramics. Ceramic composites. Determination of elastic properties by resonant beam method up to 2000°C
BS EN 15336:2007. Adhesives. Determination of the time to rupture of bonded joints under static load
BS EN 15337:2007. Adhesives. Determination of shear of anaerobic adhesives using pin-and-collar specimens
BS EN 15338:2007+A1:2010. Hardware for furniture. Strength and durability of extension elements and their components
BS EN 15339-2:2007. Thermal spraying. Safety requirements for thermal spraying equipmentGas control units
BS EN 1534:2000. Wood and parquet flooring. Determination of resistance to indentation (Brinell). Test method
BS EN 1534:2010. Wood flooring. Determination of resistance to indentation. Test method
BS EN 15340:2007. Thermal spraying. Determination of shear load resistance of thermally sprayed coatings
BS EN 15341:2007. Maintenance. Maintenance key performance indicators
BS EN 15342:2007. Plastics. Recycled plastics. Characterization of polystyrene (PS) recyclates
BS EN 15343:2007. Plastics. Recycled plastics. Plastics recycling traceability and assessment of conformity and recycled content
BS EN 15344:2007. Plastics. Recycled plastics. Characterization of polyethylene (PE) recyclates
BS EN 15345:2007. Plastics. Recycled plastics. Characterization of polypropylene (PP) recyclates
BS EN 15346:2007. Plastics. Recycled plastics. Characterization of poly(vinyl chloride) (PVC) recyclates
BS EN 15347:2007. Plastics. Recycled Plastics. Characterization of plastics waste
BS EN 15348:2007. Plastics. Recycled plastics. Characterization of poly(ethylene terephthalate) (PET) recyclates
BS EN 15355:2008+A1:2010. Railway applications. Braking. Distributor valves and distributor-isolating devices
BS EN 15357:2011. Solid recovered fuels. Terminology, definitions and descriptions
BS EN 15358:2011. Solid recovered fuels. Quality management systems. Particular requirements for their application to the production of solid recovered fuels
BS EN 15359:2011. Solid recovered fuels. Specifications and classes
BS EN 1536:2000. Execution of special geotechnical work. Bored piles
BS EN 1536:2010. Execution of special geotechnical works. Bored piles
BS EN 15360:2007. Fertilizers. Determination of dicyandiamide. Method using high-performance liquid chromatography (HPLC)
BS EN 15361:2007. Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components of autoclaved aerated concrete
BS EN 15362:2007. Chemicals used for treatment of swimming pool water. Sodium carbonate
BS EN 15363:2007. Chemicals used for treatment of swimming pool water. Chlorine
BS EN 15365:2010. Advanced technical ceramics. Mechanical properties of ceramic fibres at high temperature in a non-reactive environment. Determination of creep behaviour by the cold end method
BS EN 15368:2008+A1:2010. Hydraulic binder for non-structural applications Definition, specifications and conformity criteria
BS EN 1537:2000. Execution of special geotechnical work. Ground anchors
BS EN 1537:2013. Execution of special geotechnical works. Ground anchors
BS EN 15372:2008. Furniture. Strength, durability and safety. Requirements for non-domestic tables
BS EN 15373:2007. Furniture. Strength, durability and safety. Requirements for non-domestic seating
BS EN 15376:2007+A1:2009. Automotive fuels. Ethanol as a blending component for petrol. Requirements and test methods
BS EN 15376:2011. Automotive fuels. Ethanol as a blending component for petrol. Requirements and test methods
BS EN 15377-1:2008. Heating systems in buildings. Design of embedded water based surface heating and cooling systemsDetermination of the design heating and cooling capacity
BS EN 15377-2:2008. Heating systems in buildings. Design of embedded water based surface heating and cooling systemsDesign, dimensioning and installation
BS EN 15377-3:2007. Heating systems in buildings. Design of embedded water based surface heating and cooling systemsOptimizing for use of renewable energy sources
BS EN 15378:2007. Heating systems in buildings. Inspection of boilers and heating systems
BS EN 1538:2000. Execution of special geotechnical works. Diaphragm walls
BS EN 1538:2010. Execution of special geotechnical works. Diaphragm walls
BS EN 15380-1:2006. Railway applications. Designation system for railway vehiclesGeneral principles
BS EN 15380-2:2006. Railway applications. Designation systemat for railway vehiclesProduct groups
BS EN 15380-3:2006. Railway applications. Designation system for railway vehiclesDesignation of installation sites and locations
BS EN 15380-4:2013. Railway applications. Classification system for railway vehiclesFunction groups
BS EN 15381:2008. Geotextiles and geotextile-related products. Characteristics required for use in pavements and asphalt overlays
BS EN 15382:2008. Geosynthetic barriers. Characteristics required for use in transportation infrastructure
BS EN 15382:2013. Geosynthetic barriers. Characteristics required for use in transportation infrastructure
BS EN 15383:2012+A1:2013. Plastics piping systems for drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Manholes and inspection chambers
BS EN 15384:2007. Packaging. Flexible aluminium tubes. Test method to determine the porosity of the internal coating
BS EN 15385:2007. Packaging. Flexible laminate tubes. Test methods to determine the strength of the head welding
BS EN 15386:2007. Packaging. Flexible laminate and plastic tubes. Test method to determine the print adhesion
BS EN 15387:2011. Packaging. Flexible laminate tubes. Test methods to assess the strength of the side seam
BS EN 15388:2008. Agglomerated stone. Slabs and cut-to-size products for vanity and kitchen tops
BS EN 15389:2008. Industrial valves. Performance characteristics of thermoplastic valves when used as construction products
BS EN 1539:2000. Dryers and ovens in which flammable substances are released. Safety requirements
BS EN 1539:2009. Dryers and ovens, in which flammable substances are released Safety requirements
BS EN 1540:1998. Workplace atmospheres. Terminology
BS EN 1540:2011. Workplace exposure. Terminology
BS EN 15400:2011. Solid recovered fuels. Determination of calorific value
BS EN 15402:2011. Solid recovered fuels. Determination of the content of volatile matter
BS EN 15403:2011. Solid recovered fuels. Determination of ash content
BS EN 15407:2011. Solid recovered fuels. Methods for the determination of carbon (C), hydrogen (H) and nitrogen (N) content
BS EN 15408:2011. Solid recovered fuels. Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
BS EN 1541:1997. Paper and board intended to come into contact with foodstuffs. Determination of formaldehyde in an aqueous extract
BS EN 1541:1998. Paper and board intended to come into contact with foodstuffs. Determination of formaldehyde in an aqueous extract
BS EN 1541:2001. Paper and board intended to come into contact with foodstuffs. Determination of formaldehyde in an aqueous extract
BS EN 15410:2011. Solid recovered fuels. Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
BS EN 15411:2011. Solid recovered fuels. Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
BS EN 15413:2011. Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
BS EN 15414-3:2011. Solid recovered fuels. Determination of moisture content using the oven dry methodMoisture in general analysis sample
BS EN 15415-1:2011. Solid recovered fuels. Determination of particle size distributionScreen method for small dimension particles
BS EN 15415-2:2012. Solid recovered fuels. Determination of particle size distributionMaximum projected length method (manual) for large dimension particles
BS EN 15415-3:2012. Solid recovered fuels. Determination of particle size distributionMethod by image analysis for large dimension particles
BS EN 15416-2:2007. Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methodsStatic load test of multiple bondline specimens in compression shear
BS EN 15416-3:2007+A1:2010. Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Creep deformation test at cyclic climate conditions with specimens loaded in bending shear
BS EN 15416-4:2006. Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methodsDetermination of open assembly time for one component polyurethane adhesives
BS EN 15416-5:2006. Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methodsDetermination of conventional pressing time
BS EN 15417:2006. Gas-fired central heating boilers. Specific requirements for condensing boilers with a nominal heat input greater than 70 kW but not exceeding 1000 kW
BS EN 1542:1999. Products and systems for the protection and repair of concrete structures. Test methods. Measurement of bond strength by pull-off
BS EN 15420:2010. Gas-fired central heating boilers. Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1000 kW
BS EN 15421:2007. Packaging. Flexible aluminium tubes. Determination of the adhesion of the internal and external protective lacquering
BS EN 15422:2008. Precast concrete products. Specification of glassfibres for reinforcement of mortars and concretes
BS EN 15423:2008. Ventilation for buildings. Fire precaution for air distribution systems in buildings
BS EN 15424:2007. Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices
BS EN 15425:2008. Adhesives. One component polyurethane for load bearing timber structures. Classification and performance requirements
BS EN 15426:2007. Candles. Specification for sooting behaviour
BS EN 15427:2008+A1:2010. Railway applications. Wheel/rail friction management. Flange lubrication
BS EN 15428:2007. Soil improvers and growing media. Determination of particle size distribution
BS EN 15429-1:2007. SweepersClassification and Terminology
BS EN 15429-2:2012. SweepersPerformance requirements and test methods
BS EN 1543:1998. Products and systems for the protection and repair of concrete structures. Test methods. Determination of tensile strength development for polymers
BS EN 15430-1:2007+A1:2011. Winter and road service area maintenance equipments. Data acquisition and transmissionIn vehicle data acquisition
BS EN 15431:2008. Winter and road service area maintenance equipments. Power system and related controls. Interchangeability and performance requirements
BS EN 15432:2008. Winter and road service area maintenance equipments. Front-mounted equipments. Interchangeability
BS EN 15432-1:2011. Winter and road service area maintenance equipments. Front-mounted equipmentsFixed front mounting plates
BS EN 15432-2:2013. Winter and road service area maintenance equipments. Front-mountedequipmentsInterchangeability on lifting systems
BS EN 15433-1:2007. Transportation loads. Measurement and evaluation of dynamic mechanical loadsGeneral requirements
BS EN 15433-2:2007. Transportation loads. Measurement and evaluation of dynamic mechanical loadsData acquisition and general requirements for measuring equipment
BS EN 15433-3:2007. Transportation loads. Measurement and evaluation of dynamic mechanical loadsData validity check and data editing for evaluation
BS EN 15433-4:2007. Transportation loads. Measurement and evaluation of dynamic mechanical loadsData evaluation
BS EN 15433-5:2007. Transportation loads. Measurement and evaluation of dynamic mechanical loadsDerivation of test specifications
BS EN 15433-6:2007. Transportation loads. Measurement and evaluation of dynamic mechanical loadsAutomatic recording systems for measuring randomly occurring shock during monitoring of transports
BS EN 15434:2006+A1:2010. Glass in building. Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
BS EN 15435:2008. Precast concrete products. Normal weight and lightweight concrete shuttering blocks. Product properties and performance
BS EN 15436-1:2008. Road service area maintenance equipmentTerminology
BS EN 15436-2:2008. Road service area maintenance equipmentPerformance assessment
BS EN 15436-4:2009. Road service area maintenance equipmentDelivery acceptance of the machines by the users
BS EN 15437-1:2009. Railway applications. Axlebox condition monitoring. Interface and design requirementsTrack side equipment and rolling stock axlebox
BS EN 15437-2:2012. Railway applications. Axlebox condition monitoring. Interface and design requirementsPerformance and design requirements of on-board systems for temperature monitoring
BS EN 1544:2006. Products and systems for the protection and repair of concrete structures. Test methods. Determination of creep under sustained tensile load for synthetic resin products (PC) for anchoring of reinforcing bars
BS EN 15440:2011. Solid recovered fuels. Methods for the determination of biomass content
BS EN 15442:2011. Solid recovered fuels. Methods for sampling
BS EN 15443:2011. Solid recovered fuels. Methods for the preparation of the laboratory sample
BS EN 15445:2008. Fugitive and diffuse emissions of common concern to industry sectors. Qualification of fugitive dust sources by reverse dispersion modelling
BS EN 15446:2008. Fugitive and diffuse emissions of common concern to industry sectors. Measurement of fugitive emission of vapours generating from equipment and piping leaks
BS EN 15450:2007. Heating systems in buildings. Design of heat pump heating systems
BS EN 1545-1:2005. Identification card systems. Surface transport applicationsElementary data types, general code lists and general data elements
BS EN 15451:2008. Fertilizers. Determination of chelating agents. Determination of iron chelated by EDDHSA by ion pair chromatography
BS EN 1545-2:2005. Identification card systems. Surface transport applicationsTransport and travel payment related data elements and code lists
BS EN 15452:2008. Fertilizers. Determination of chelating agents. Determination of iron chelated by o,p-EDDHA by reversed phase HPLC
BS EN 15456:2008. Heating boilers. Electrical power consumption for heat generators. System boundaries. Measurements
BS EN 15457:2007. Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against fungi
BS EN 15458:2007. Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against algae
BS EN 15459:2007. Energy performance of buildings. Economic evaluation procedure for energy systems in buildings
BS EN 15460:2007. Water quality. Guidance standard for the surveying of macrophytes in lakes
BS EN 1546-1:1999. Identification card systems. Inter-sector electronic purseDefinitions, concepts and structures
BS EN 15461:2008+A1:2010. Railway applications. Noise emission. Characterization of the dynamic properties of track selections for pass by noise measurements
BS EN 1546-2:2000. Identification card systems. Inter-sector electronic purseSecurity architecture
BS EN 1546-3:2000. Identification card systems. Inter-sector electronic purseData elements and interchanges
BS EN 1546-4:1999. Identification card systems. Inter-sector electronic purseData objects
BS EN 15466-1:2009. Primers for cold and hot applied joint sealantsDetermination of homogeneity
BS EN 15466-2:2009. Primers for cold and hot applied joint sealantsDetermination of resistance against alkali
BS EN 15466-3:2009. Primers for cold and hot applied joint sealantsDetermination of solids content and evaporation behaviour of volatiles
BS EN 15468:2007. Laminate floor coverings. Elements with directly applied printing and resin surface layer. Specifications, requirements and test methods
BS EN 15469:2007. Petroleum products. Test method for free water in liquefied petroleum gas by visual inspection
BS EN 1547:2001+A1:2009. Industrial thermoprocessing equipment. Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
BS EN 15470:2007. Liquefied petroleum gases. Determination of dissolved residues. High temperature gas chromatographic method
BS EN 15471:2007. Liquefied petroleum gases. Determination of dissolved residues. High-temperature gravimetric method
BS EN 15475:2009. Fertilizers. Determination of ammoniacal nitrogen
BS EN 15476:2009. Fertilizers. Determination of nitric and ammoniacal nitrogen according to Devarda
BS EN 15477:2009. Fertilizers. Determination of the water-soluble potassium content
BS EN 15478:2009. Fertilizers. Determination of total nitrogen in urea
BS EN 15479:2009. Fertilizers. Spectrophotometric determination of biuret in urea
BS EN 1548:2007. Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Method for exposure to bitumen
BS EN 15482:2007. Chemicals used for treatment of water intended for human consumption. Sodium permanganate
BS EN 15482:2012. Chemicals used for treatment of water intended for human consumption. Sodium permanganate
BS EN 15483:2008. Ambient air quality. Atmospheric measurements near ground with FTIR spectroscopy
BS EN 15484:2007, BS 2000-552:2007. Ethanol as a blending component for petrol. Determination of inorganic chloride. Potentiometric method
BS EN 15485:2007, BS 2000-553:2007. Ethanol as a blending component for petrol. Determination of sulfur content. Wavelength dispersive X-ray fluorescence spectrometric method
BS EN 15486:2007, BS 2000-554:2007. Ethanol as a blending component for petrol. Determination of sulfur content. Ultraviolet fluorescence method
BS EN 15487:2007, BS 2000-555:2007. Ethanol as a blending component for petrol. Determination of phosphorus content. Ammonium molybdate spectrometric method
BS EN 15488:2007, BS 2000-556:2007. Ethanol as a blending component for petrol. Determination of copper content. Graphite furnace atomic absorption spectrometric method
BS EN 15489:2007, BS 2000-539:2007. Ethanol as a blending component for petrol. Determination of water content. Karl Fischer coulometric titration method
BS EN 15490:2007, BS 2000-557:2007. Ethanol as a blending component for petrol. Determination of pHe
BS EN 15491:2007, BS 2000-538:2007. Ethanol as a blending component for petrol. Determination of total acidity. Colour indicator titration method
BS EN 15492:2008. Ethanol as a blending component for petrol. Determination of inorganic chloride and sulfate content. Ion chromatographic method
BS EN 15492:2012, BS 2000-563:2011. Ethanol as a blending component for petrol. Determination of inorganic chloride and sulfate content. Ion chromatographic method
BS EN 15493:2007. Candles. Specification for fire safety
BS EN 15494:2007. Candles. Product safety labels
BS EN 15495:2007. Non-destructive testing. Acoustic emission. Examination of metallic pressure equipment during proof testing. Zone location of AE sources
BS EN 15496:2008. Cycles. Requirements and test methods for cycle locks
BS EN 15498:2008. Precast concrete products. Wood-chip concrete shuttering blocks. Product properties and performance
BS EN 1550:1997+A1:2008. Machine-tools safety. Safety requirements for the design and construction of work holding chucks
BS EN 15500:2008. Control for heating, ventilating and air-conditioning applications. Electronic individual zone control equipment
BS EN 15501:2013. Thermal insulation products for building equipment and industrial installations. Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products. Specification
BS EN 15502-1:2012. Gas-fired heating boilersGeneral requirements and tests
BS EN 15502-2-1:2012. Gas-fired central heating boilersSpecific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW
BS EN 15503:2009. Garden equipment. Garden blowers, vacuums and blower/ vacuums. Safety
BS EN 15505:2008. Foodstuffs. Determination of trace elements. Determination of sodium and magnesium by flame atomic absorption spectrometry (AAS) after microwave digestion
BS EN 15507:2008. Packaging. Transport packaging for dangerous goods. Comparative material testing of polyethylene grades
BS EN 15509:2007. Road transport and traffic telematics. Electronic fee collection. Interoperability application profile for DSRC
BS EN 1551:2000. Safety of industrial trucks. Self propelled trucks over 10 000 kg capacity
BS EN 15510:2007. Animal feeding stuffs. Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum, arsenic, lead and cadmium by ICP-AES
BS EN 15512:2009. Steel static storage systems. Adjustable pallet racking systems. Principles for structural design
BS EN 15513:2007. Chemicals used for treatment of swimming pool water. Carbon dioxide
BS EN 15514:2007. Chemicals used for treatment of swimming pool water. Hydrochloric acid
BS EN 15517:2008. Foodstuffs. Determination of trace elements. Determination of inorganic arsenic in seaweed by hydride generation atomic absorption spectrometry (HGAAS) after acid extraction
BS EN 15518-1:2011. Winter maintenance equipment. Road weather information systemsGlobal definitions and components
BS EN 15518-2:2011. Winter maintenance equipment. Road weather information systemsRoad weather. Recommended observation and forecast
BS EN 15518-3:2011. Winter maintenance equipment. Road weather information systemsRequirements on measured values of stationary equipments
BS EN 15519:2007. Paper and board intended to come into contact with foodstuffs. Preparation of an organic solvent extract
BS EN 1552:2003. Underground mining machines. Mobile extracting machines at the face. Safety requirements for shearer loaders and plough systems
BS EN 15520:2007. Thermal spraying. Recommendations for constructional design of components with thermally sprayed coatings
BS EN 15521:2007. Health informatics. Categorial structure for terminologies of human anatomy
BS EN 15527:2008. Characterization of waste. Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS)
BS EN 15528:2008+A1:2012. Railway applications. Line categories for managing the interface between load limits of vehicles and infrastructure
BS EN 15529:2007. Derivatives from coal pyrolysis. Terminology
BS EN 1553:2000. Agricultural machinery. Agricultural self-propelled mounted, semi-mounted and trailed machines. Common safety requirements
BS EN 15530:2008. Aluminium and aluminium alloys. Environmental aspects of aluminium products. General guidelines for their inclusion in standards
BS EN 15532:2008. Cycles. Terminology
BS EN 15536:2007. Derivatives from coal pyrolysis. Coal tar based oils. Wash oils. Specifications and test methods
BS EN 1554:1999. Conveyor belts. Drum friction testing
BS EN 1554:2012. Conveyor belts. Drum friction testing
BS EN 15542:2008. Ductile iron pipes, fittings and accessories. External cement mortar coating for pipes. Requirements and test methods
BS EN 15543:2008. Glass packaging. Finishes for bottles. Screw thread finishes for bottles for non-carbonated liquids
BS EN 15544:2009. One off Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves). Dimensioning
BS EN 15546-1:2008. Small bore connectors for liquids and gases in healthcare applicationsGeneral requirements
BS EN 15549:2008. Air quality. Standard method for the measurement of the concentration of benzo(a)pyrene in ambient air
BS EN 15550:2007. Animal feeding stuffs. Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
BS EN 1555-1:2002. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)General
BS EN 15551:2009+A1:2010. Railway applications. Railway rolling stock. Buffers
BS EN 1555-1:2010. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)General
BS EN 1555-2:2002. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)Pipes
BS EN 15552:2008. Packaging. Complete, filled transport packages and unit loads. Performance testing schedules for common distribution chains
BS EN 1555-2:2010. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)Pipes
BS EN 1555-3:2002. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)Fittings
BS EN 15553:2007, BS 2000-156:2007. Petroleum products and related materials. Determination of hydrocarbon types. Fluorescent indicator adsorption method
BS EN 1555-3:2010+A1:2012. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)Fittings
BS EN 1555-4:2002. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)Valves
BS EN 1555-4:2011. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)Valves
BS EN 1555-5:2002. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)Fitness for the purpose of the system
BS EN 1555-5:2010. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)Fitness for purpose of the system
BS EN 15558:2009. Fertilizers. Determination of nitric and ammoniacal nitrogen according to Ulsch
BS EN 15559:2009. Fertilizers. Determination of nitric and ammoniacal nitrogen according to Arnd
BS EN 1556:1998. Bar coding. Terminology
BS EN 15560:2009. Fertilizers. Determination of total nitrogen in calcium cyanamide nitrate free
BS EN 15561:2009. Fertilizers. Determination of total nitrogen in calcium cyanamide containing nitrates
BS EN 15562:2009. Fertilizers. Determination of cyanamide nitrogen
BS EN 15564:2008. Precast concrete products. Resin bound concrete. Requirements and test methods
BS EN 15565:2008. Tourism services. Requirements for the provision of professional tourist guide training and qualification programmes
BS EN 15566:2009+A1:2010. Railway applications. Railway rolling stock. Draw gear and screw coupling
BS EN 15567-1:2007. Sports and recreational facilities. Ropes coursesConstruction and safety requirements
BS EN 15567-2:2007. Sports and recreational facilities. Ropes coursesOperation requirements
BS EN 15570:2008. Hardware for furniture. Strength and durability of hinges and their components. Hinges pivoting on a vertical axis
BS EN 15573:2008. Earth-moving machinery. Design requirements for circulation on the road
BS EN 15583-1:2009. Winter maintenance equipment. Snow ploughsProduct description and requirements
BS EN 15583-2:2012. Winter maintenance equipment. Snow ploughsTesting criteria and their requirements
BS EN 15585:2008. Cereals and cereal products. Durum wheat (T. durum Desf.). Determination of percentage of mitadine grains and calculation of percentage of vitreous grains
BS EN 15586:2008. Textiles. Methods of testing the fibre proof properties of fabrics. Rubbing test
BS EN 15587:2008+A1:2013. Cereals and cereal products. Determination of Besatz in wheat (Triticum aestivum L.), durum wheat (Triticum durum Desf.), rye (Secale cereale L.) and feed barley (Hordeum vulgare L.)
BS EN 15590:2011. Solid recovered fuels. Determination of the current rate of aerobic microbial activity using the real dynamic respiration index
BS EN 1559-1:1997. Founding. Technical conditions of deliveryGeneral
BS EN 1559-1:2011. Founding. Technical conditions of deliveryGeneral
BS EN 1559-2:2000. Founding. Technical conditions of deliveryAdditional requirements for steel castings
BS EN 1559-3:1997. Founding. Technical conditions of deliveryAdditional requirements for iron castings
BS EN 15593:2008. Packaging. Management of hygiene in the production of packaging for foodstuffs. Requirements
BS EN 1559-3:2011. Founding. Technical conditions of deliveryAdditional requirements for iron castings
BS EN 1559-4:1999. Founding. Technical conditions of deliveryAdditional requirements for aluminium alloy castings
BS EN 15594:2009. Railway applications. Track. Restoration of rails by electric arc welding
BS EN 1559-5:1998. Founding. Technical conditions of deliveryAdditional requirements for magnesium alloy castings
BS EN 15595:2009+A1:2011. Railway applications. Braking. Wheel slide protection
BS EN 1559-6:1999. Founding. Technical conditions of deliveryAdditional requirements for zinc alloy castings
BS EN 15597-1:2009. Winter maintenance equipment. Spreading machines (gritting machines)General requirements and definitions for spreading machines
BS EN 15598:2008. Textiles. Terry fabrics. Test method for the determination of the resistance to pile loop extraction
BS EN 15599-1:2010. Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from expanded perlite (EP) productsSpecification for bonded and loose-fill products before installation
BS EN 15599-2:2010. Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from expanded perlite (EP) productsSpecification for the installed products
BS EN 1560:1997. Founding. Designation system for cast iron. Material symbols and material numbers
BS EN 1560:2011. Founding. Designation system for cast iron. Material symbols and material numbers
BS EN 15600-1:2010. Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from exfoliated vermiculite (EV) productsSpecification for bonded and loose-fill products before installation
BS EN 15600-2:2010. Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from exfoliated vermiculite (EV) productsSpecification for the installed products
BS EN 15602:2008. Security service providers. Terminology
BS EN 15603:2008. Energy performance of buildings. Overall energy use and definition of energy ratings
BS EN 15604:2009. Fertilizers. Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
BS EN 15605:2010. Copper and copper alloys. Inductively coupled plasma optical emission spectrometry
BS EN 15607:2009. Foodstuffs. Determination of d-biotin by HPLC
BS EN 15608:2008. Surface active agents. Quantitative determination of free fatty acid in alkylamidopropylbetaines. Gas- chromatographic method
BS EN 15609:2008. LPG equipment and accessories. LPG propulsion systems for boats, yachts and other craft. Installation requirements
BS EN 15609:2012. LPG equipment and accessories. LPG propulsion systems for boats, yachts and other craft
BS EN 1561:1997. Founding. Grey cast irons
BS EN 1561:2011. Founding. Grey cast irons
BS EN 15610:2009. Railway applications. Noise emission. Rail roughness measurement related to rolling noise generation
BS EN 15611:2008+A1:2010. Railway applications. Braking. Relay valves
BS EN 15612:2008+A1:2010. Railway applications. Braking. Brake pipe accelerator valve
BS EN 15613:2008. Knee and elbow protectors for indoor sports. Safety requirements and test methods
BS EN 15614:2007. Protective clothing for firefighters. Laboratory test methods and performance requirements for wildland clothing
BS EN 15616:2012. Copper and copper alloys. Determination of cadmium content. Flame atomic absorption spectrometric method (FAAS)
BS EN 15617:2009. Non-destructive testing of welds. Time-of-flight diffraction technique (TOFD). Acceptance levels
BS EN 15618:2009+A1:2012. Rubber- or plastic-coated fabrics. Upholstery fabrics. Classification and methods of test
BS EN 15619:2008+A1:2010. Rubber or plastic coated fabrics. Safety of temporary structures (tents). Specification for coated fabrics intended for tents and related structures
BS EN 1562:1997. Founding. Malleable cast irons
BS EN 1562:2012. Founding. Malleable cast irons
BS EN 15620:2008. Steel static storage systems. Adjustable pallet racking. Tolerances, deformations and clearances
BS EN 15621:2012. Animal feeding stuffs. Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES
BS EN 15622:2010. Copper and copper alloys. Determination of lead content. Flame atomic absorption spectrometric method (FAAS)
BS EN 15624:2008+A1:2010. Railway applications. Braking. Empty-loaded changeover devices
BS EN 15625:2008+A1:2010. Railway applications. Braking. Automatic variable load sensing devices
BS EN 15626:2009. Bitumen and bituminous binders. Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test. Aggregate method
BS EN 15629:2008. Steel static storage systems. Specification of storage equipment
BS EN 1563:1997. Founding. Spheroidal graphite cast iron
BS EN 1563:2011. Founding. Spheroidal graphite cast irons
BS EN 15632-1:2009. District heating pipes. Pre-insulated flexible pipe systemsClassification, general requirements and test methods
BS EN 15632-2:2010. District heating pipes. Pre-insulated flexible pipe systemsBonded plastic service pipes. Requirements and test methods
BS EN 15632-3:2010. District heating pipes. Pre-insulated flexible pipe systems Non bonded system with plastic service pipes; requirements and test methods
BS EN 15632-4:2009. District heating pipes. Pre-insulated flexible pipe systemsBonded system with metal service pipes; requirements and test methods
BS EN 15633-1:2009. Foodstuffs. Detection of food allergens by immunological methodsGeneral considerations
BS EN 15634-1:2009. Foodstuffs. Detection of food allergens by molecular biological methodsGeneral considerations
BS EN 15635:2008. Steel static storage systems. Application and maintenance of storage equipment
BS EN 15636:2010. Sanitary appliances. Shower trays made from impact modified extruded acrylic sheets. Requirements and test methods
BS EN 15637:2008. Foods of plant origin. Determination of pesticide residues using LC-MS/MS following methanol extraction and clean-up using diatomaceous earth
BS EN 15638:2009. Ice skates. Safety requirements and test methods
BS EN 1564:1997. Founding. Austempered ductile cast irons
BS EN 1564:2011. Founding. Ausferritic spheroidal graphite cast irons
BS EN 15643-1:2010. Sustainability of construction works. Sustainability assessment of buildingsGeneral framework
BS EN 15643-2:2011. Sustainability of construction works. Assessment of buildingsFramework for the assessment of environmental performance
BS EN 15643-3:2012. Sustainability of construction works. Assessment of buildingsFramework for the assessment of social performance
BS EN 15643-4:2012. Sustainability of construction works. Assessment of buildingsFramework for the assessment of economic performance
BS EN 15644:2008. Traditionally designed prefabricated stairs made of solid wood. Specifications and requirements
BS EN 15646:2009. Electrodeposited coatings. Electroplated coatings of aluminium and aluminium alloys with supplementary treatment. Requirements and test methods
BS EN 15647:2009. Surface active agents. Determination of the dispersing effect of surfactants on powder
BS EN 15648:2009. Thermal spraying. Component related procedure qualification
BS EN 15649-1:2009+A1:2012. Floating leisure articles for use on and in the waterClassification, materials, general requirements and test methods
BS EN 15649-2:2009+A2:2013. Floating leisure articles for use on and in the waterConsumer information
BS EN 15649-3:2009+A1:2012. Floating leisure articles for use on and in the waterAdditional specific safety requirements and test methods for Class A devices
BS EN 15649-4:2010+A1:2012. Floating leisure articles for use on and in the waterAdditional specific safety requirements and test methods for Class B devices
BS EN 15649-5:2009. Floating leisure articles for use on and in the waterAdditional specific safety requirements and test methods for Class C devices
BS EN 15649-6:2009. Floating leisure articles for use on and in the waterAdditional specific safety requirements and test methods for Class D devices
BS EN 15649-7:2009. Floating leisure articles for use on and in the waterAdditional specific safety requirements and test methods for Class E devices
BS EN 15650:2010. Ventilation for buildings. Fire dampers
BS EN 1565-1:2000. Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC)Specifications for pipes, fittings and the system
BS EN 15651-1:2010. Sealants for non-structural use in joints in buildings and pedestrian walkwaysSealants for facade elements
BS EN 15651-1:2012. Sealants for non-structural use in joints in buildings and pedestrian walkwaysSealants for facade elements
BS EN 15651-2:2010. Sealants for non-structural use in joints in buildings and pedestrian walkwaysSealants for glazing
BS EN 15651-2:2012. Sealants for non-structural use in joints in buildings and pedestrian walkwaysSealants for glazing
BS EN 15651-3:2010. Sealants for non-structural use in joints in buildings and pedestrian walkwaysSealants for sanitary joints
BS EN 15651-3:2012. Sealants for non-structural use in joints in buildings and pedestrian walkwaysSealants for sanitary joints
BS EN 15651-4:2010. Sealants for non-structural use in joints in buildings and pedestrian walkwaysSealants for pedestrian walkways
BS EN 15651-4:2012. Sealants for non-structural use in joints in buildings and pedestrian walkwaysSealants for pedestrian walkways
BS EN 15651-5:2010. Sealants for non-structural use in joints in buildings and pedestrian walkwaysEvaluation of conformity and marking
BS EN 15651-5:2012. Sealants for non-structural use in joints in buildings and pedestrian walkwaysEvaluation of conformity and marking
BS EN 15652:2009. Foodstuffs. Determination of niacin by HPLC
BS EN 15653:2009. Packaging. Flexible aluminium tubes. Test method to check the resistance of the internal protective coating against ammonia
BS EN 15655:2009. Ductile iron pipes, fittings and accessories. Internal polyurethane lining for pipes and fittings. Requirements and test methods
BS EN 15657-1:2009. Acoustic properties of building elements and of buildings. Laboratory measurement of airborne and structure borne sound from building equipmentSimplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example
BS EN 15659:2009. Secure storage units. Classification and methods of test for resistance to fire. Light fire storage units
BS EN 1566-1:2000. Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C)Specification for pipes, fittings and the system
BS EN 15662:2008. Foods of plant origin. Determination of pesticide residues using GC-MS and/or LC-MS/MS following acetonitrile extraction/partitioning and clean-up by dispersive SPE. QuEChERS-method
BS EN 15663:2009. Railway applications. Definition of vehicle reference masses
BS EN 15664-1:2008. Influence of metallic materials on water intended for human consumption. Dynamic rig test for assessment of metal releaseDesign and operation
BS EN 15664-2:2010. Influence of metallic materials on water intended for human consumption. Dynamic rig test for assessment of metal releaseTest waters
BS EN 15665:2009. Ventilation for buildings. Determining performance criteria for residential ventilation systems
BS EN 1567:1999. Building valves. Water pressure reducing valves and combination water reducing valves. Requirements and tests.
BS EN 1568-1:2000. Fire extinguishing media. Foam concentratesSpecification for medium expansion foam concentrates for surface application to water-immiscible liquids
BS EN 1568-1:2008. Fire extinguishing media. Foam concentratesSpecification for medium expansion foam concentrates for surface application to water-immiscible liquids
BS EN 1568-2:2000. Fire extinguishing media. Foam concentratesSpecification for high expansion foam concentrates for surface application to water-immiscible liquids
BS EN 1568-2:2008. Fire extinguishing media. Foam concentratesSpecification for high expansion foam concentrates for surface application to water-immiscible liquids
BS EN 15682-1:2013. Glass in building. Heat soaked thermally toughened alkaline earth silicate safety glassDefinition and description
BS EN 15682-2:2013. Glass in building. Heat soaked thermally toughened alkaline earth silicate safety glassEvaluation of conformity/Product standard
BS EN 1568-3:2000. Fire extinguishing media. Foam concentratesSpecification for low expansion foam concentrates for surface application to water-immiscible liquids
BS EN 1568-3:2008. Fire extinguishing media. Foam concentratesSpecification for low expansion foam concentrates for surface application to water-immiscible liquids
BS EN 15683-1:2013. Glass in building. Thermally toughened soda lime silicate channel shaped safety glassDefinition and description
BS EN 1568-4:2000. Fire extinguishing media. Foam concentratesSpecification for low expansion foam concentrates for surface application to water-miscible liquids
BS EN 1568-4:2008. Fire extinguishing media. Foam concentratesSpecification for low expansion foam concentrates for surface application to water-miscible liquids
BS EN 15684:2012. Building hardware. Mechatronic cylinders. Requirements and test methods
BS EN 15686:2010. Railway applications. Testing for the acceptance of running characteristics of railway vehicles with cant deficiency compensation system and/or vehicles intended to operate with higher cant deficiency than stated in EN 14363:2005, Annex G
BS EN 15687:2010. Railway applications. Testing for the acceptance of running characteristics of freight vehicles with static axle loads higher than 225 kN and up to 250 kN
BS EN 15688:2008. Fertilizers. Determination of urease inhibitor N-(n-butyl)thiophosphoric triamide (NBPT) using high-performance liquid chromatography (HPLC)
BS EN 15689:2009. Railway applications. Track. Switches and crossings. Crossing components made of cast austenitic manganese steel
BS EN 1569:1999. Surfaces for sports areas. Determination of the behaviour under a rolling load
BS EN 15690-2:2009. Copper and copper alloys. Determination of iron contentFlame atomic absorption spectrometric method (FAAS)
BS EN 15691:2009, BS 2000-576:2009. Ethanol as a blending component for petrol. Determination of total dry residue (involatile material). Gravimetric method
BS EN 15692:2009, BS 2000-572:2009. Ethanol as a blending component for petrol. Determination of water content. Karl Fischer potentiometric titration method
BS EN 15694:2009. Agricultural and forestry tractors. Passenger seat. Requirements and test procedures
BS EN 15695-1:2009. Agricultural tractors and self-propelled sprayers. Protection of the operator (driver) against hazardous substancesCab classification, requirements and test procedures
BS EN 15695-2:2009. Agricultural tractors and self-propelled sprayers. Protection of the operator (driver) against hazardous substancesFilters, requirements and test procedures
BS EN 15696:2008. Self storage. Specification for self storage services
BS EN 15698-1:2009. District heating pipes. Preinsulated bonded twin pipe systems for directly buried hot water networksTwin pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
BS EN 1570:1998+A2:2009. Safety requirements for lifting tables
BS EN 15700:2011. Safety for conveyor belts for winter sport or leisure use
BS EN 15701:2009. Plastics. Thermoplastic jackets for insulation products for building equipment and industrial installations. Requirements and test methods
BS EN 1570-1:2011. Safety requirements for lifting tablesLifting tables serving up to two fixed landings
BS EN 15702:2008. Cellular plastics. Cell count procedure for flexible and rigid polyurethane
BS EN 15704:2008. Liming materials. Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water
BS EN 15705:2010. Fertilizers. Determination of urea condensates using high-performance liquid chromatography (HPLC). Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B)
BS EN 15706:2009. Hardware for furniture. Strength and durability of slide fittings for sliding doors and roll fronts
BS EN 15707:2008. Print media surveys. Vocabulary and service requirements
BS EN 15708:2009. Water quality. Guidance standard for the surveying, sampling and laboratory analysis of phytobenthos in shallow running water
BS EN 1571:1997. Bar coding. Data identifiers
BS EN 15711:2009. Vitreous and porcelain enamels. Glass lined flanged steel pipes and flanged steel fittings. Quality requirements
BS EN 15713:2009. Secure destruction of confidential material. Code of practice
BS EN 15714-1:2009. Industrial valves. ActuatorsTerminology and definitions
BS EN 15714-2:2009. Industrial valves. ActuatorsElectric actuators for industrial valves. Basic requirements
BS EN 15714-3:2009. Industrial valves. ActuatorsPneumatic part-turn actuators for industrial valves. Basic requirements
BS EN 15714-4:2009. Industrial valves. ActuatorsHydraulic part-turn actuators for industrial valves. Basic requirements
BS EN 15715:2009. Thermal insulation products. Instructions for mounting and fixing for reaction to fire testing. Factory made products
BS EN 15719:2009. Sanitary appliances. Baths made from impact modified coextruded ABS/acrylic sheets. Requirements and test methods
BS EN 1572:1997. Bar coding. Unique identifier for transport units
BS EN 15720:2009. Sanitary appliances. Shower trays made from impact modified coextruded ABS/acrylic sheets. Requirements and test methods
BS EN 15721:2009. Ethanol as a blending component for petrol. Determination of higher alcohols, methanol and volatile impurities. Gas chromatographic method
BS EN 15721:2013, BS 2000-571:2013. Ethanol as a blending component for petrol. Determination of higher alcohols, methanol and other impurities. Gas chromatographic method
BS EN 15722:2011. Intelligent transport systems. eSafety. eCall minimum set of data (MSD)
BS EN 15723:2010. Railway applications. Closing and locking devices for payload protecting devices against environmental influences. Requirements for durability, operation, indication, maintenance, recycling
BS EN 15725:2010. Extended application reports on the fire performance of construction products and building elements
BS EN 15726:2011. Ventilation for buildings. Air diffusion. Measurements in the occupied zone of air-conditioned/ventilated rooms to evaluate thermal and acoustic conditions
BS EN 15727:2010. Ventilation for buildings. Ducts and ductwork components, leakage classification and testing
BS EN 1573:1997. Bar coding. Multi industry transport label
BS EN 15732:2012. Light weight fill and thermal insulation products for civil engineering applications (CEA). Expanded clay lightweight aggregate products (LWA)
BS EN 15733:2009. Services of real estate agents. Requirements for the provision of services of real estate agents
BS EN 15734-1:2010. Railway applications. Braking systems of high speed trains Requirements and definitions
BS EN 15734-2:2010. Railway applications. Braking systems of high speed trains Test methods
BS EN 15736:2009. Timber structures. Test methods. Withdrawal capacity of punched metal plate fasteners in handling and erection of prefabricated trusses
BS EN 15737:2009. Timber structures. Test methods. Torsional resistance of driving in screws
BS EN 1574:1996. EDI. Message. Bayplan/stowage plan occupied and empty locations (BAPLIE)
BS EN 15741:2009. Animal feeding stuffs. Determination of OC-pesticides and PCBs by GC/MS
BS EN 15742:2009. Animal feeding stuffs. Determination of OC-pesticides and PCBs by GC/ECD
BS EN 15743:2010. Supersulfated cement. Composition, specifications and conformity criteria
BS EN 15744:2009. Film identification. Minimum set of metadata for cinematographic works
BS EN 15746-1:2010+A1:2011. Railway applications. Track. Road-rail machines and associated equipmentTechnical requirements for running and working
BS EN 15746-2:2010+A1:2011. Railway applications. Track. Road-rail machines and associated equipmentGeneral safety requirements
BS EN 15749:2009. Fertilizers. Determination of sulfates content using three different methods
BS EN 1575:1996. EDI. Message. Bayplan/stowage plan total numbers message (BAPLTE)
BS EN 15750:2009. Fertilizers. Determination of total nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods
BS EN 15751:2009, BS 2000-574:2009. Automotive fuels. Fatty acid methyl ester (FAME) fuel and blends with diesel fuel. Determination of oxidation stability by accelerated oxidation method
BS EN 15757:2010. Conservation of cultural property. Specifications for temperature and relative humidity to limit climate-induced mechanical damage in organic hygroscopic materials
BS EN 15758:2010. Conservation of cultural property. Procedures and instruments for measuring temperatures of the air and the surfaces of objects
BS EN 15759-1:2011. Conservation of cultural property. Indoor climateGuidelines for heating churches, chapels and other places of worship
BS EN 15761:2009. Pre-shaped growing media. Determination of length, width, height, volume and bulk density
BS EN 15763:2009. Foodstuffs. Determination of trace elements. Determination of arsenic, cadmium, mercury and lead in foodstuffs by inductively coupled plasma mass spectrometry (ICPMS) after pressure digestion
BS EN 15764:2009. Foodstuffs. Determination of trace elements. Determination of tin by flame and graphite furnace atomic absorption spectrometry (FAAS and GFAAS) after pressure digestion
BS EN 15765:2009. Foodstuffs. Determination of trace elements. Determination of tin by inductively coupled plasma mass spectrometry (ICPMS) after pressure digestion
BS EN 15766:2009. Packaging. Flexible aluminium tubes. Test methods to determine the polymerization of the internal coating with acetone
BS EN 15767-1:2009. Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable monitorsGeneral requirements for portable monitor assemblies
BS EN 15767-2:2009. Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable monitorsWater nozzles
BS EN 15767-3:2010. Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable monitorsFoam devices
BS EN 15769:2009, BS 2000-573:2009. Ethanol as a blending component of petrol. Determination of appearance. Visual method
BS EN 15771:2010. Vitreous and porcelain enamels. Determination of surface scratch hardness according to the Mohs scale
BS EN 15772:2012. Textile floor coverings. Minimum requirements for needled floor coverings for single usage in events of limited duration
BS EN 15773:2009. Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems]. Specifications, recommendations and guidelines
BS EN 15774:2010. Food processing machinery. Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi). Safety and hygiene requirements
BS EN 15776:2011. Unfired pressure vessels. Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 %
BS EN 15777:2009. Textiles. Test methods for phthalates
BS EN 15779:2009, BS 2000-578:2009. Petroleum products and fat and oil derivates. Fatty acid methyl esters (FAME) for diesel engines. Determination of polyunsaturated (≥ 4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography
BS EN 1578:1996. EDI. Message. Customs declaration message (CUSDEC)
BS EN 15780:2011. Ventilation for buildings. Ductwork. Cleanliness of ventilation systems
BS EN 15781:2009. Animal feeding stuffs. Determination of maduramicin-ammonium by reversed-phase HPLC using post-column derivatisation
BS EN 15782:2009. Animal feeding stuffs. Determination of nicarbazin. High-performance liquid chromatographic method
BS EN 15784:2009. Animal feeding stuffs. Isolation and enumeration of presumptive Bacillus spp.
BS EN 15785:2009. Animal feeding stuffs. Isolation and enumeration of Bifidobacterium spp.
BS EN 15786:2009. Animal feeding stuffs. Isolation and enumeration of Pediococcus spp.
BS EN 15787:2009. Animal feeding stuffs. Isolation and enumeration of Lactobacillus spp.
BS EN 15788:2009. Animal feeding stuffs. Isolation and enumeration of Enterococcus (E. faecium) spp.
BS EN 15789:2009. Animal feeding stuffs. Isolation and enumeration of yeast probiotic strains
BS EN 15791:2009. Foodstuffs. Determination of deoxynivalenol in animal feed. HPLC method with immunoaffinity column clean-up
BS EN 15792:2009. Animal feeding stuffs. Determination of zearalenone in animal feed. High performance liquid chromatographic method with fluorescence detection and immunoaffinity column clean-up
BS EN 15794:2009. Determination of explosion points of flammable liquids
BS EN 15795:2010. Products used for treatment of water intended for human consumption. Natural unexpanded aluminosilicates
BS EN 15796:2010. Chemicals used for treatment of swimming pool water. Calcium hypochlorite
BS EN 15797:2010. Chemicals used for the treatment of swimming pool water. Iron based coagulants
BS EN 15798:2010. Products used for the treatment of swimming pool water. Filter media
BS EN 15799:2010. Products used for treatment of swimming pool water. Powdered activated carbon
BS EN 1580:1996. EDI. Message. Forwarding and consolidation summary message (IFCSUM)
BS EN 15800:2008. Cylindrical helical springs made of round wire. Quality specifications for cold coiled compression springs
BS EN 15801:2009. Conservation of cultural property. Test methods. Determination of water absorption by capillarity
BS EN 15802:2009. Conservation of cultural property. Test methods. Determination of static contact angle
BS EN 15804:2012. Sustainability of construction works. Environmental product declarations. Core rules for the product category of construction products
BS EN 15805:2009. Particulate air filters for general ventilation. Standardised dimensions
BS EN 15806:2010. Railway applications. Braking. Static brake testing
BS EN 15807:2011. Railway applications. Pneumatic half couplings
BS EN 1581:1996. EDI. Message. Arrival notice message (IFTMAN)
BS EN 15811:2009. Agricultural machinery. Guards for moving parts of power transmission. Guard opening with tool
BS EN 15812:2011. Polymer modified bituminous thick coatings for waterproofing. Determination of crack bridging ability
BS EN 15813:2011. Polymer modified bituminous thick coatings for waterproofing. Determination of flexibility at low temperatures
BS EN 15814:2011+A1:2012. Polymer modified bituminous thick coatings for waterproofing. Definitions and requirements
BS EN 15815:2011. Polymer modified bituminous thick coatings for waterproofing. Resistance to compression
BS EN 15816:2011. Polymer modified bituminous thick coatings for waterproofing. Resistance to rain
BS EN 15817:2011. Polymer modified bituminous thick coatings for waterproofing. Water resistance
BS EN 15818:2011. Polymer modified bituminous thick coatings for waterproofing. Determination of dimensional stability at high temperature
BS EN 15819:2011. Polymer modified bituminous thick coatings for waterproofing. Reduction of the thickness of the layer when fully dried
BS EN 1582:1996. EDI. Message. Booking confirmation message (IFTMBC)
BS EN 15820:2011. Polymer modified bituminous thick coatings for waterproofing. Determination of watertightness
BS EN 15821:2010. Multi-firing sauna stoves fired by natural wood logs. Requirements and test methods
BS EN 15823:2010. Packaging. Braille on packaging for medicinal products
BS EN 15824:2009. Specifications for external renders and internal plasters based on organic binders
BS EN 15825:2010. Textile floor coverings. Classification of machine-made rugs and runners without pile
BS EN 15826:2009. Vitreous and porcelain enamels. Terminology
BS EN 15827:2011. Railway applications. Requirements for bogies and running gears
BS EN 15828:2010. Hardware for furniture. Strength and durability of hinges and their components. Stays and hinges pivoting on a horizontal axis
BS EN 15829:2010. Foodstuffs. Determination of ochratoxin A in currants, raisins, sultanas, mixed dried fruit and dried figs. HPLC method with immunoaffinity column cleanup and fluorescence detection
BS EN 1583:1996. EDI. Message. Firm booking message (IFTMBF)
BS EN 15830:2012. Rough-terrain variable reach trucks. Visibility. Test methods and verification
BS EN 15835:2010. Foodstuffs. Determination of ochratoxin A in cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluorescence detection
BS EN 15836-1:2010. Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming poolsHomogenous membranes of nominal thickness equal to or greater than 0,75 mm
BS EN 15836-2:2010. Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming poolsReinforced membranes of nominal thickness equal to or greater than 1,5 mm
BS EN 15837:2009, BS 2000-581:2009. Ethanol as a blending component for petrol. Determination of phosphorus, copper and sulfur content. Direct method by inductively coupled plasma optical emission spectrometry (ICP OES)
BS EN 15838:2009. Customer contact centres. Requirements for service provision
BS EN 15839:2012. Railway applications. Testing for the acceptance of running characteristics of railway vehicles. Freight wagons. Testing of running safety under longitudinal compressive forces
BS EN 1584:1996. EDI. Message. Provisional booking message (IFTMBP)
BS EN 15841:2009. Ambient air quality. Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition
BS EN 15842:2010. Foodstuffs. Detection of food allergens. General considerations and validation of methods
BS EN 15843:2010. Water quality. Guidance standard on determining the degree of modification of river hydromorphology
BS EN 15845:2010. Paper and board. Determination of the cytotoxicity of aqueous extracts
BS EN 15848:2010. Water conditioning equipment inside buildings. Adjustable chemical dosing systems. Requirements for performance, safety and testing
BS EN 1585:1996. EDI. Message. Instruction contract status message (IFTMCS)
BS EN 15850:2010. Foodstuffs. Determination of zearalenone in maize based baby food, barley flour, maize flour, polenta, wheat flour and cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluorescence detection
BS EN 15851:2010. Foodstuffs. Determination of aflatoxin B1 in cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluorescence detection
BS EN 15852:2010. Ambient air quality. Standard method for the determination of total gaseous mercury
BS EN 15853:2010. Ambient air quality. Standard method for the determination of mercury deposition
BS EN 15856:2010. Non-destructive testing. Acoustic emission. General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
BS EN 15857:2010. Non-destructive testing. Acoustic emission. Testing of fibre-reinforced polymers. Specific methodology and general evaluation criteria
BS EN 15859:2010. Air quality. Certification of automated dust arrestment plant monitors for use on stationary sources. Performance criteria and test procedures
BS EN 1586:1996. EDI. Message. Instruction message (IFTMIN)
BS EN 15860:2010. Plastics. Thermoplastic semi-finished products for machining. Requirements and test methods
BS EN 15861:2012. Food processing machinery. Smokehouses. Safety and hygienerequirements
BS EN 15865:2009. Adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners
BS EN 15869-1:2010. Inland navigation vessels. Electrical shore connection, three phase current 400 V, up to 63 A, 50 HzGeneral requirements
BS EN 15869-2:2010. Inland navigation vessels. Electrical shore connection, three phase current 400 V, up to 63 A, 50 HzOnshore unit, safety requirements
BS EN 15869-3:2010. Inland navigation vessels. Electrical shore connection, three phase current 400 V, up to 63 A, 50 HzOn-board unit, safety requirements
BS EN 1587:1996. EDI. Message. Payroll deductions advice message (PAYDUC)
BS EN 15870:2009. Adhesives. Determination of tensile strength of butt joints
BS EN 15875:2011. Characterisation of waste. Static test for determination of acid potential and neutralisation potential of sulfidic waste
BS EN 15876-1:2010+A1:2012. Electronic fee collection. Evaluation of on-board and roadside equipment for conformity to EN 15509Test suite structure and test purposes
BS EN 15876-2:2011. Electronic fee collection. Evaluation of on-board and roadside equipment for conformity to EN 15509Abstract test suite
BS EN 15877-1:2012. Railway applications. Marking on railway vehiclesFreight wagons
BS EN 15878:2010. Steel static storage systems. Terms and definitions
BS EN 15879-1:2011. Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or coolingDirect exchange-to-water heat pumps
BS EN 15882-1:2011. Extended application of results from fire resistance tests for service installationsDucts
BS EN 15882-3:2009. Extended applications of results from fire resistance tests for service installationsPenetration seals
BS EN 15882-4:2012. Extended application of results from fire resistance tests for service installationsLinear joint seals
BS EN 15885:2010. Classification and characteristics of techniques for renovation and repair of drains and sewers
BS EN 15886:2010. Conservation of cultural property. Test methods. Colour measurement of surfaces
BS EN 15889:2011. Fire-fighting hoses. Test methods
BS EN 15890:2010. Foodstuffs. Determination of patulin in fruit juice and fruit based purée for infants and young children. HPLC method with liquid/liquid partition cleanup and solid phase extraction and UV detection
BS EN 15891:2010. Foodstuffs. Determination of deoxynivalenol in cereals, cereal products and cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and UV detection
BS EN 15892:2011. Railway applications. Noise emission. Measurement of noise inside driver's cabs
BS EN 15895:2011. Cartridge operated hand-held tools. Safety requirements. Fixing and hard marking tools
BS EN 15898:2011. Conservation of cultural property. Main general terms and definitions
BS EN 1590:1996. EDI. Message. Remittance advice message (REMADV)
BS EN 15900:2010. Energy efficiency services. Definitions and requirements
BS EN 15904:2010. Glass packaging. Standard tolerances for flaconnage
BS EN 15905:2010. Fertilizers. Determination of 3-methylpyrazole (MP) using high-performance liquid chromatography (HPLC)
BS EN 15906:2011. Winter maintenance equipment. Snow removal machines with rotating tools. Specification and clearing capacity
BS EN 15907:2010. Film identification. Enhancing interoperability of metadata. Element sets and structures
BS EN 15908:2010. Anaesthetic and respiratory equipment. Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
BS EN 15909:2010. Fertilizers. Determination of calcium and formate in calcium foliar fertilizers
BS EN 1591-1:2001+A1:2009. Flanges and their joints. Design rules for gasketed circular flange connectionsCalculation method
BS EN 15911:2010. Foodstuffs. Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection
BS EN 1591-2:2008. Flanges and their joints. Design rules for gasketed circular flange connectionsGasket parameters
BS EN 1591-4:2013. Flanges and their jointsQualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems
BS EN 15915:2010. Copper and copper alloys. Determination of silver content. Flame atomic absorption spectrometric method (FAAS)
BS EN 15916-2:2010. Copper and copper alloys. Determination of tellurium contentMedium tellurium content. Flame atomic absorption spectrometric method (FAAS)
BS EN 15918:2011+A1:2013. Cycles. Cycle trailers. Safety requirements and test methods
BS EN 15919:2011. Fertilizers. Extraction of phosphorus soluble in 2 % formic acid
BS EN 15920:2011. Fertilizers. Extraction of phosphorus soluble in 2 % citric acid
BS EN 1592-1:1998. Aluminium and aluminium alloys. HF seam welded tubesTechnical conditions for inspection and delivery
BS EN 15921:2011. Fertilizers. Extraction of soluble phosphorus according to Petermann at 65 °C
BS EN 1592-2:1998. Aluminium and aluminium alloys. HF seam welded tubesMechanical properties
BS EN 15922:2011. Fertilizers. Extraction of soluble phosphorus according to Petermann at ambient temperature
BS EN 1592-3:1998. Aluminium and aluminium alloys. HF seam welded tubesTolerances on dimensions and form for circular tubes
BS EN 15923:2011. Fertilizers. Extraction of phosphorus soluble in Joulie's alcaline ammonium citrate
BS EN 1592-4:1998. Aluminium and aluminium alloys. HF seam welded tubesTolerances on dimensions and form for square, rectangular and shaped tubes
BS EN 15924:2011. Fertilizers. Determination of the fineness of grinding of soft natural phosphates
BS EN 15925:2011. Fertilizers. Extraction of total sulfur present in various forms
BS EN 15926:2011. Fertilizers. Extraction of water soluble sulfur where the sulfur is in various forms
BS EN 15927:2010. Services offered by hearing aid professionals
BS EN 15928:2010. Fertilizers. Determination of the fineness of grinding (dry procedure)
BS EN 1593:1999. Non-destructive testing. Leak testing. Bubble emission techniques
BS EN 15930:2010. Fibres. Elasticity of fibres. Test methods
BS EN 15933:2012. Sludge, treated biowaste and soil. Determination of pH
BS EN 15934:2012. Sludge, treated biowaste, soil and waste. Calculation of dry matter fraction after determination of dry residue or water content
BS EN 15935:2012. Sludge, treated biowaste, soil and waste. Determination of loss on ignition
BS EN 15936:2012. Sludge, treated biowaste, soil and waste. Determination of total organic carbon (TOC) by dry combustion
BS EN 15938:2010, BS 2000-586:2010. Automotive fuels. Ethanol blending component and ethanol (E85) automotive fuel. Determination of electrical conductivity
BS EN 15939:2011. Hardware for furniture. Strength and loading capacity of wall attachment devices
BS EN 1594:2000. Gas supply systems. Pipelines for maximum operating pressure over 16 bar. Functional requirements
BS EN 1594:2009. Gas supply systems. Pipelines for maximum operating pressure over 16 bar. Functional requirements
BS EN 1594:2013. Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
BS EN 15942:2011. Sustainability of construction works. Environmental product declarations. Communication format business-to-business
BS EN 15943:2011. Curriculum exchange format (CEF). Data model
BS EN 15944:2010, BS 2000-587:2010. Liquid petroleum products. Determination of nickel and vanadium content. Inductively coupled plasma optical emission spectrometry method (ICP OES)
BS EN 15946:2011. Conservation of cultural property. Packing principles for transport
BS EN 15947-1:2010. Pyrotechnic articles. Fireworks, Categories 1, 2, and 3Terminology
BS EN 15947-2:2010. Pyrotechnic articles. Fireworks, Categories 1, 2, and 3Categories and types of firework
BS EN 15947-3:2010. Pyrotechnic articles. Fireworks, Categories 1, 2, and 3Minimum labelling requirements
BS EN 15947-4:2010. Pyrotechnic articles. Fireworks, Categories 1, 2 and 3Test methods
BS EN 15947-5:2010. Pyrotechnic articles. Fireworks, Categories 1, 2, and 3Requirements for construction and performance
BS EN 15948:2012. Cereals. Determination of moisture and protein. Method using Near-Infrared- Spectroscopy in whole kernels
BS EN 15949:2012. Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills
BS EN 1595:1997. Pressure equipment made from borosilicate glass 3.3. General rules for design, manufacture and testing
BS EN 15950:2010. Fertilizers. Determination of N-(1,2-dicarboxyethyl)-D,L-aspartic acid (Iminodisuccinic acid, IDHA) using high-performance liquid chromatography (HPLC)
BS EN 15954-1:2013. Railway applications. Track. Trailers and associated equipmentTechnical requirements for running and working
BS EN 15954-2:2013. Railway applications. Track. Trailers and associated equipmentGeneral safety requirements
BS EN 15955-1:2013. Railway applications. Track. Demountable machines and associated equipmentTechnical requirements for running and working
BS EN 15955-2:2013. Railway applications. Track. Demountable machines and associated equipmentGeneral safety requirements
BS EN 15956:2011. Fertilizers. Extraction of phosphorus soluble in mineral acids
BS EN 15957:2011. Fertilizers. Extraction of phosphorus which is soluble in neutral ammonium citrate
BS EN 15958:2011. Fertilizers. Extraction of water soluble phosphorus
BS EN 15959:2011. Fertilizers. Determination of extracted phosphorus
BS EN 1596:1998. Specification for dedicated liquefied petroleum gas appliances. Mobile and portable non-domestic forced convection direct fired air heaters
BS EN 15960:2011. Fertilizers. Extraction of total calcium, total magnesium, total sodium and total sulfur in the forms of sulfates
BS EN 15961:2011. Fertilizers. Extraction of water-soluble calcium, magnesium, sodium and sulfur in the form of sulfates
BS EN 15962:2011. Fertilizers. Determination of the complexed micro-nutrient content and of the complexed fraction of micro-nutrients
BS EN 15964:2011. Breath alcohol test devices other than single use devices. Requirements and test methods
BS EN 15967:2011. Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
BS EN 15969-1:2011. Tanks for transport of dangerous goods. Digital interface for the data transfer between tank vehicle and with stationary facilitiesProtocol specification. Control, measurement and event data
BS EN 15969-2:2011. Tanks for transport of dangerous goods. Digital interface for the data transfer between tank vehicle and with stationary facilitiesCommercial and logistic data
BS EN 1597-1:1997. Welding consumables. Test methodsTest piece for all-weld metal test specimens in steel, nickel and nickel alloys
BS EN 1597-2:1997. Welding consumables. Test methodsPreparation of test piece for single-run and two-run technique test specimens in steel
BS EN 15972:2011. Water quality. Guidance on quantitative and qualitative investigations of marine phytoplankton
BS EN 1597-3:1997. Welding consumables. Test methodsTesting of positional capability of welding consumables in a fillet weld
BS EN 15973:2011. Rubber or plastic-coated fabrics. Upholstery fabrics. Resistance to soiling
BS EN 15975-1:2011. Security of drinking water supply. Guidelines for risk and crisis managementCrisis management
BS EN 15975-2:2013. Security of drinking water supply. Guidelines for risk and crisis managementRisk management
BS EN 15976:2011. Flexible sheets for waterproofing. Determination of emissivity
BS EN 15977:2011. Rubber or plastic coated fabrics. Mechanical properties. Determination of the elongation under load and the residual deformation
BS EN 15978:2011. Sustainability of construction works. Assessment of environmental performance of buildings. Calculation method
BS EN 15979:2011. Testing of ceramic raw and basic materials. Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation
BS EN 1598:1998. Health and safety in welding and allied processes. Transparent welding curtains, strips and screens for arc welding processes
BS EN 1598:2011. Health and safety in welding and allied processes. Transparent welding curtains, strips and screens for arc welding processes
BS EN 15980:2011. Air quality. Determination of the deposition of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a,h]anthracene and indeno[1,2,3-cd]pyrene
BS EN 15981:2011. European Learner Mobility. Achievement information (EuroLMAI)
BS EN 15982:2011. Metadata for learning opportunities (MLO). Advertising
BS EN 15984:2011. Petroleum industry and products. Determination of composition of refinery heating gas and calculation of carbon content and calorific value. Gas chromatography method
BS EN 15986:2011. Symbol for use in the labelling of medical devices. Requirements for labelling of medical devices containing phthalates
BS EN 15987:2011. Leather. Terminology. Key definitions for the leather trade
BS EN 1599:1997. Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification
BS EN 15991:2011. Testing of ceramic and basic materials. Direct determination of mass fractions of impurities in powders and granules of silicon carbide by inductively coupled plasma optical emission spectrometry (ICP OES) with electrothermal vaporisation (ETV)
BS EN 15997:2011. All terrain vehicles (ATVs - Quads). Safety requirements and test methods
BS EN 15998:2010. Glass in building. Safety in case of fire, fire resistance. Glass testing methodology for the purpose of classification
BS EN 1600:1997. Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat resisting steels. Classification
BS EN 16000:2010. Plastics piping systems. Systems within the building structure. Mounting and fixing of components in the test apparatus to thermal attack by a single burning item
BS EN 160000:1993. Harmonized system of quality assessment for electronic components. Generic specification: modular electronic units
BS EN 16001:2009. Energy management systems. Requirements with guidance for use
BS EN 16002:2010. Flexible sheets for waterproofing. Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing
BS EN 16003:2011. Chemicals used for treatment of water intended for human consumption. Calcium magnesium carbonate
BS EN 16004:2011. Chemicals used for treatment of water intended for human consumption. Magnesium oxide
BS EN 16005:2012. Power operated pedestrian doorsets. Safety in use. Requirements and test methods
BS EN 16006:2011. Animal feeding stuffs. Determination of the sum of fumonisin B1 & B2 in compound animal feed with immunoaffinity clean-up and RP-HPLC with fluorescence detection after pre- or postcolumn derivatisation
BS EN 16007:2011. Animal feeding stuffs. Determination of ochratoxin A in animal feed by immunoaffinity column clean-up and high performance liquid chromatography with fluorescence detection
BS EN 16009:2011. Flameless explosion venting devices
BS EN 1601:1997, BS 2000-408:1997. Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID)
BS EN 160100:1998. Harmonized system of quality assessment for electronic components. Sectional specification: capability approval of manufacturers of printed board assemblies of assessed quality
BS EN 160101:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: printed board assembly modular electronic units of assessed quality. Capability approval
BS EN 16012:2012. Thermal insulation for buildings. Reflective insulation products. Determination of the declared thermal performance
BS EN 16014:2011. Hardware for furniture. Strength and durability of locking mechanisms
BS EN 16016-1:2011. Non destructive testing. Radiation methods. Computed tomographyTerminology
BS EN 16016-2:2011. Non destructive testing. Radiation methods. Computed tomographyPrinciple, equipment and samples
BS EN 16016-3:2011. Non destructive testing. Radiation methods. Computed TomographyOperation and interpretation
BS EN 16016-4:2011. Non destructive testing. Radiation methods. Computed tomographyQualification
BS EN 16018:2011. Non-destructive testing. Terminology. Terms used in ultrasonic testing with phased arrays
BS EN 1602:1997. Thermal insulating products for building applications. Determination of the apparent density
BS EN 1602:2013. Thermal insulating products for building applications. Determination of the apparent density
BS EN 16020:2011. Explosion diverters
BS EN 160200-1:1998. Harmonized system of quality assessment for electronic components. Sectional specification. Microwave modular electronic units of assessed qualityCapability approval procedure
BS EN 160200-2:1998. Harmonized system of quality assessment for electronic components. Sectional specification. Microwave modular electronic units of assessed qualityIndex of test methods
BS EN 160201:1998. Harmonized system of quality assessment for electronic components. Blank detail specification. Microwave modular electronic units of assessed quality. Capability approval
BS EN 16024:2011. Fertilizers. Determination of 1H-1,2,4-triazole in urea and in fertilizers containing urea. Method using high-performance liquid chromatography (HPLC)
BS EN 16025-1:2013. Thermal and/or sound insulating products in building construction. Bound EPS ballastingsRequirements for factory premixed EPS dry plaster
BS EN 16025-2:2013. Thermal and/or sound insulating products in building construction. Bound EPS ballastingsProcessing of the factory premixed EPS dry plaster
BS EN 16027:2011. Protective clothing. Gloves with protective effect for association football goal keepers
BS EN 16028:2012. Railway applications. Wheel/rail friction management. Lubricants for trainborne and trackside applications
BS EN 16029:2012. Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads. Single-track two-wheel motor vehicles. Safety requirements and test methods
BS EN 1603:1997. Thermal insulating products for building applications. Determination of dimensional stability under constant normal laboratory conditions (23°C/50% relative humidity)
BS EN 1603:2013. Thermal insulating products for building applications. Determination of dimensional stability under constant normal laboratory conditions (23°C/50% relative humidity)
BS EN 16031:2012. Adjustable telescopic aluminium props. Product specifications, design and assessment by calculation and tests
BS EN 16032:2011. Fertilizers. Extraction and determination of elemental sulfur
BS EN 16035:2012. Hardware performance sheet (HPS). Identification and summary of test evidence to facilitate the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows
BS EN 16037:2012. Chemicals used for treatment of water intended for human consumption. Sodium hydrogen sulfate
BS EN 16038:2012. Chemicals used for treatment of water for swimming pools. Sodium hydrogen sulfate
BS EN 16039:2011. Water quality. Guidance standard on assessing the hydromorphological features of lakes
BS EN 1604:1996. Thermal insulating products for building applications. Determination of dimensional stability under specified temperature and humidity conditions
BS EN 1604:2013. Thermal insulating products for building applications. Determination of dimensional stability under specified temperature and humidity conditions
BS EN 1605:1997. Thermal insulating products for building applications. Determination of deformation under specified compressive load and temperature conditions
BS EN 1605:2013. Thermal insulating products for building applications. Determination of deformation under specified compressive load and temperature conditions
BS EN 16051-1:2012. Inflation devices and accessories for inflatable consumer productsCompatibility of valves and valve adapters
BS EN 16051-2:2012. Inflation devices and accessories for inflatable consumer productsSafety requirements, durability, performance, compatibility and test methods of inflators
BS EN 16054:2012. BMX bicycles. Safety requirements and test methods
BS EN 16055:2012. Leather. Raw bovine hides and skins. Description, presentation and preservation
BS EN 16056:2012. Influence of metallic materials on water intended for human consumption. Method to evaluate the passive behaviour of stainless steels
BS EN 16057:2012. Influence of metallic materials on water intended for human consumption. Determination of residual surface lead (Pb). Extraction method
BS EN 16058:2012. Influence of metallic materials on water intended for human consumption. Dynamic rig test for assessment of surface coatings with nickel layers. Long-term test method
BS EN 1606:1997. Thermal insulating products for building applications. Determination of compressive creep
BS EN 1606:2013. Thermal insulating products for building applications. Determination of compressive creep
BS EN 16062:2011. Intelligent transport systems. eSafety. eCall high level application requirements (HLAP)
BS EN 16063:2011. Packaging. Rigid plastic containers. Nomenclature of plastic finishes
BS EN 16064:2011. Packaging. Rigid plastic containers. PET finish 30/25 H (18,5)
BS EN 16065:2011. Packaging - Rigid plastic containers. PET finish 30/25 Low (16,8)
BS EN 16066:2011. Packaging. Rigid plastic containers. PET finish 26,7 (lead 6,35)
BS EN 16067:2011. Packaging. Rigid plastic Containers. PET finish 26,7 (lead 9,00)
BS EN 16068:2011. Packaging. Rigid plastic containers. PET finish 38
BS EN 16069:2012. Thermal insulation products for buildings. Factory made products of polyethylene foam (PEF). Specification
BS EN 1607:1997. Thermal insulating products for building applications. Determination of tensile strength perpendicular to faces
BS EN 16072:2011. Intelligent transport systems. eSafety. Pan-European eCall operating requirements
BS EN 16074:2011. Paints and varnishes. Determination of non-volatile matter content and spreading rate of coil coating materials
BS EN 16075:2011. Fertilizers. Determination of N-(2-nitrophenyl) phosphoric triamide (2- NPT) in urea and fertilizers containing urea. Method using high-performance liquid chromatography (HPLC)
BS EN 16079:2011. Founding. Compacted (vermicular) graphite cast irons
BS EN 1608:1997. Thermal insulating products for building applications. Determination of tensile strength parallel to faces
BS EN 1608:2013. Thermal insulating products for building applications. Determination of tensile strength parallel to faces
BS EN 16081:2011+A1:2013. Hyperbaric chambers. Specific requirements for fire extinguishing systems. Performance, installation and testing
BS EN 16082:2011. Airport and aviation security services
BS EN 16083:2012. Paddles and oars for recreational boats. Safety requirements and test methods
BS EN 16084:2011. Refrigerating systems and heat pumps. Qualification of tightness of components and joints
BS EN 16085:2012. Conservation of Cultural property. Methodology for sampling from materials of cultural property. General rules
BS EN 16086-1:2011. Soil improvers and growing media. Determination of plant responsePot growth test with Chinese cabbage
BS EN 16086-2:2011. Soil improvers and growing media. Determination of plant responsePetri dish test using cress
BS EN 16087-1:2011. Soil improvers and growing media. Determination of the aerobic biological activityOxygen uptake rate (OUR)
BS EN 16087-2:2011. Soil improvers and growing media. Determination of the aerobic biological activitySelf heating test for compost
BS EN 1609:1997. Thermal insulating products for building applications. Determination of dimensional short term water absorption by partial immersion
BS EN 1609:2013. Thermal insulating products for building applications. Determination of short term water absorption by partial immersion
BS EN 16090:2011. Copper and copper alloys. Estimation of average grain size by ultrasound
BS EN 16091:2011, BS 2000-595:2011. Liquid petroleum products. Middle distillates and fatty acid methyl ester (FAME) fuels and blends. Determination of oxidation stability by rapid small scale oxidation method
BS EN 16094:2012. Laminate floor coverings. Test method for the determination of micro-scratch resistance
BS EN 16095:2012. Conservation of cultural property. Condition recording for movable cultural heritage
BS EN 16096:2012. Conservation of cultural property. Condition survey and report of built cultural heritage
BS EN 161:1991. Automatic shut-off valves for gas burners and gas appliances
BS EN 161:2002. Automatic shut-off valves for gas burners and gas appliances
BS EN 161:2007. Automatic shut-off valves for gas burners and gas appliances
BS EN 161:2011+A3:2013. Automatic shut-off valves for gas burners and gas appliances
BS EN 1610:1998. Construction and testing of drains and sewers
BS EN 16101:2012. Water quality. Guidance standard on interlaboratory comparison studies for ecological assessment
BS EN 16102:2011. Intelligent transport systems. eCall. Operating requirements for third party support
BS EN 16104:2012. Food data. Structure and interchange format
BS EN 16105:2011. Paints and varnishes. Laboratory method for determination of release of substances from coatings in intermittent contact with water
BS EN 16109:2011. Fertilizers. Determination of complexed micro-nutrient ions in fertilizers. Identification of lignosulfonates
BS EN 1611-1:2000. Sawn timber. Appearance grading of softwoodsEuropean spruces, firs, pines and Douglas fir
BS EN 16114:2011. Management consultancy services
BS EN 16116-1:2013. Railway applications. Design requirements for steps, handrails and associated access for staffPassenger vehicles, luggage vans and locomotives
BS EN 16116-2:2013. Railway applications. Design requirements for steps, handrails and associated access for staffFreight wagons
BS EN 16117-1:2011. Copper and copper alloys. Determination of copper contentElectrolytic determination of copper in materials with copper content less than 99,85 %
BS EN 16117-2:2012. Copper and copper alloys. Determination of copper contentElectrolytic determination of copper in materials with copper content higher than 99,80 %
BS EN 16119:2013. LPG equipment and accessories. Sealing caps and plugs for LPG cylinder and pressure vessel valves. Specification and testing
BS EN 16120:2012. Child use and care articles. Chair mounted seat
BS EN 1612-1:1997+A1:2008. Plastics and rubber machines. Reaction moulding machinesSafety requirements for metering and mixing units
BS EN 16121:2013. Non-domestic storage furniture. Requirements for safety, strength, durability and stability
BS EN 1612-2:2000+A1:2008. Plastics and rubber machines. Reaction moulding machinesSafety requirements for reaction moulding plant
BS EN 16122:2012. Domestic and non-domestic storage furniture. Test methods for the determination of strength, durability and stability
BS EN 16123:2013. Characterization of waste. Guidance on selection and application of screening methods
BS EN 16124:2011. Founding. Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications
BS EN 16126:2012. Solid biofuels. Determination of particle size distribution of disintegrated pellets
BS EN 16127:2012. Solid biofuels. Determination of length and diameter of pellets
BS EN 16128:2011. Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin
BS EN 16129:2013. Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
BS EN 16135:2011, BS 2000-588:2011. Automotive fuels. Determination of manganese content in unleaded petrol. Flame atomic absorption spectrometric method (FAAS)
BS EN 16136:2011, BS 2000-589:2011. Automotive fuels. Determination of manganese content in unleaded petrol. Inductively coupled plasma optical emission spectrometry (ICP OES) method
BS EN 16139:2013. Furniture. Strength, durability and safety. Requirements for non-domestic seating
BS EN 1614:2006. Health informatics. Representation of dedicated kinds of property in laboratory medicine
BS EN 16140:2011. Natural stone test methods. Determination of sensitivity to changes in appearance produced by thermal cycles
BS EN 16141:2012. Conservation of cultural heritage. Guidelines for management of environmental conditions. Open storage facilities: definitions and characteristics of collection centres dedicated to the preservation and management of cultural heritage
BS EN 16143:2013, BS 2000-605:2013. Petroleum products. Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils. Procedure using double LC cleaning and GC/MS analysis
BS EN 16144:2012, BS 2000-567:2012. Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Fixed range injection period, constant volume combustion chamber method
BS EN 16145:2012. Sanitary tapware. Extractable outlets for sink and basin mixers. General technical specification
BS EN 16146:2012. Sanitary tapware. Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2. General technical specification
BS EN 16147:2011. Heat pumps with electrically driven compressors. Testing and requirements for marking of domestic hot water units
BS EN 1615:1997. Sterile enteral feeding catheters and giving sets for single use
BS EN 1615:2000. Enteral feeding catheters and enteral giving sets for single use and their connectors. Design and testing
BS EN 16150:2012. Water quality. Guidance on pro-rata Multi-Habitat sampling of benthic macro-invertebrates from wadeable rivers
BS EN 16153:2013. Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods
BS EN 16155:2012. Foodstuffs. Determination of sucralose. High performance liquid chromatographic method
BS EN 16156:2010. Cigarettes. Assessment of the ignition propensity. Safety requirement
BS EN 16158:2012. Animal feeding stuffs. Determination of semduramicin content. Liquid chromatographic method using a $0Qtree$0R analytical approach
BS EN 16159:2012. Animal feeding stuffs. Determination of selenium by hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide)
BS EN 1616:1997. Sterile urethral catheters for single use
BS EN 16160:2012. Animal feeding stuffs. Determination of Hydrocyanic acid by HPLC
BS EN 16161:2012. Water quality. Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples
BS EN 16162:2012. Animal feeding stuffs. Determination of decoquinate by HPLC with fluorescence detection
BS EN 16164:2013. Water quality. Guidance standard for designing and selecting taxonomic keys
BS EN 16166:2012. Sludge, treated biowaste and soil. Determination of adsorbable organically bound halogens (AOX)
BS EN 16167:2012. Sludge, treated biowaste and soil. Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD)
BS EN 16168:2012. Sludge, treated biowaste and soil. Determination of total nitrogen using dry combustion method
BS EN 16169:2012. Sludge, treated biowaste and soil. Determination of Kjeldahl nitrogen
BS EN 1617:1997. Sterile drainage catheters and accessory devices for single use
BS EN 16173:2012. Sludge, treated biowaste and soil. Digestion of nitric acid soluble fractions of elements
BS EN 16174:2012. Sludge, treated biowaste and soil. Digestion of aqua regia soluble fractions of elements
BS EN 16179:2012. Sludge, treated biowaste and soil. Guidance for sample pretreatment
BS EN 1618:1997. Catheters other than intravascular catheters. Test methods for common properties
BS EN 1619:1997. Biotechnology. Large-scale process and production. General requirements for management and organization for strain conservation procedures
BS EN 16192:2011. Characterization of waste. Analysis of eluates
BS EN 16194:2012. Mobile non-sewer-connected toilet cabins. Requirements of services and products relating to the deployment of cabins and sanitary products
BS EN 16195:2012. Fertilizers. Determination of chlorides in the absence of organic material
BS EN 16196:2012. Fertilizers. Manganimetric determination of extracted calcium following precipitation in the form of oxalate
BS EN 16197:2012. Fertilizers. Determination of magnesium by atomic absorption spectrometry
BS EN 16198:2012. Fertilizers. Determination of magnesium by complexometry
BS EN 16199:2012. Fertilizers. Determination of the sodium extracted by flame-emission spectrometry
BS EN 1620:1997. Biotechnology. Large-scale process and production. Plant building according to the degree of hazard
BS EN 16204:2012. Foodstuffs. Determination of lipophilic algal toxins (okadaic acid group toxins, yessotoxins, azaspiracids, pectenotoxins) in shellfish and shellfish products by LC-MS/MS
BS EN 16205:2013. Laboratory measurement of walking noise on floors
BS EN 16206:2012. Animal feeding stuffs. Determination of arsenic by hydride generation atomic absorption spectrometry (HGAAS) after microwave pressure digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide)
BS EN 16210:2013. Transportation loads. Measurement and evaluation of climatic and other loads. Data acquisition and general requirements for measuring equipment
BS EN 1621-1:1998. Motorcyclists' protective clothing against mechanical impact.Requirements and test methods for impact protectors
BS EN 1621-1:2012. Motorcyclists' protective clothing against mechanical impactMotorcyclists' limb joint impact protectors. Requirements and test methods
BS EN 1621-2:2003. Motorcyclists' protective clothing against mechanical impact.Motorcyclists back protectors. Requirements and test methods
BS EN 16212:2012. Energy Efficiency and Savings Calculation, Top-down and Bottom-up Methods
BS EN 1621-4:2013. Motorcyclists' protective clothing against mechanical impactMotorcyclists' inflatable protectors. Requirements and test methods
BS EN 16214-1:2012. Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiersTerminology
BS EN 16214-3:2012. Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiersBiodiversity and environmental aspects related to nature protection purposes
BS EN 16214-4:2013. Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiersCalculation methods of the greenhouse gas emission balance using a life cycle analysis approach
BS EN 16215:2012. Animal feeding stuffs. Determination of dioxins and dioxin-like PCBs by GC/HRMS and of indicator PCBs by GC/HRMS
BS EN 1622:1998. Water analysis. Determination of the threshold odour number (TON) and threshold flavour number (TFN)
BS EN 1622:2006. Water quality. Determination of the threshold odour number (TON) and threshold flavour number (TFN)
BS EN 16222:2012. Cathodic protection of ship hulls
BS EN 16223:2012. Leather. Requirements for the designation and description of leather in upholstery and automotive interior applications
BS EN 16224:2012. Healthcare provision by chiropractors
BS EN 16230-1:2013. Leisure kartsSafety requirements and test methods for karts
BS EN 16231:2012. Energy efficiency benchmarking methodology
BS EN 16232:2013. Child use and care articles. Infant swings
BS EN 16235:2013. Railway application. Testing for the acceptance of running characteristics of railway vehicles. Freight wagons. Conditions for dispensation of freight wagons with defined characteristics from on-track tests according to EN 14363
BS EN 16236:2013. Evaluation of conformity of aggregates. Initial Type Testing and Factory Production Control
BS EN 16237:2013. Classification of non-electrical sources of incoherent optical radiation
BS EN 1624:1999. Textiles and textile products. Burning behaviour of industrial and technical textiles. Procedure to determine the flame spread of vertically oriented specimens
BS EN 16242:2012. Conservation of cultural heritage. Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property
BS EN 16245-1:2013. Fibre-reinforced plastic composites. Declaration of raw material characteristicsGeneral requirements
BS EN 16245-2:2013. Fibre-reinforced plastic composites. Declaration of raw material characteristicsSpecific requirements for resin, curing systems, additives and modifiers
BS EN 16245-3:2013. Fibre-reinforced plastic composites. Declaration of raw material characteristicsSpecific requirements for fibre
BS EN 16245-4:2013. Fibre-reinforced plastic composites. Declaration of raw material characteristicsSpecific requirements for fabrics
BS EN 16245-5:2013. Fibre-reinforced plastic composites. Declaration of raw material characteristicsSpecific requirements for core materials
BS EN 16246:2012. Agricultural machinery. Backhoes. Safety
BS EN 16247-1:2012. Energy auditsGeneral requirements
BS EN 16249:2013. Tanks for the transport of dangerous goods. Service equipment. Cap for the adaptor for bottom loading and unloading
BS EN 1625:1999. Textiles and textile products. Burning behaviour of industrial and technical textiles. Procedure to determine the ignitability of vertically oriented specimens
BS EN 16252:2012. Machines for compacting waste materials or recyclable fractions. Horizontal baling presses. Safety requirements
BS EN 16253:2013. Air quality. Atmospheric measurements near ground with active Differential Optical Absorption Spectroscopy (DOAS). Ambient air and diffuse emission measurements
BS EN 16254:2013. Adhesives. Emulsion polymerized isocyanate (EPI) for load-bearing timber structures. Classification and performance requirements
BS EN 16256-1:2012. Pyrotechnic articles. Theatrical pyrotechnic articlesTerminology
BS EN 16256-2:2012. Pyrotechnic articles. Theatrical pyrotechnic articlesCategories of theatrical pyrotechnic articles
BS EN 16256-3:2012. Pyrotechnic articles. Theatrical pyrotechnic articlesRequirements for construction and performance
BS EN 16256-4:2012. Pyrotechnic articles. Theatrical pyrotechnic articlesMinimum labelling requirements and instructions for use
BS EN 16256-5:2012. Pyrotechnic articles. Theatrical pyrotechnic articlesTest methods
BS EN 16257:2012. Tanks for the transport of dangerous goods. Service equipment. Footvalve sizes other than 100 mm dia (nom)
BS EN 16258:2012. Methodology for calculation and declaration of energy consumption and GHG emissions of transport services (freight and passengers)
BS EN 1626:1999. Cryogenic vessels. Valves for cryogenic service
BS EN 1626:2008. Cryogenic vessels. Valves for cryogenic service
BS EN 16260:2012. Water quality. Visual seabed surveys using remotely operated and/or towed observation gear for collection of environmental data
BS EN 16261-1:2012. Pyrotechnic articles. Fireworks, category 4Terminology
BS EN 16261-2:2013. Pyrotechnic articles. Fireworks, Category 4Requirements
BS EN 16261-3:2012. Pyrotechnic articles. Fireworks, Category 4Test methods
BS EN 16261-4:2012. Pyrotechnic articles. Fireworks, Category 4Minimum labelling requirements and instructions for use
BS EN 16268:2013. Perfomance of reflecting surfaces for luminaires
BS EN 1627:2011. Pedestrian doorsets, windows, curtain walling, grilles and shutters. Burglar resistance. Requirements and classification
BS EN 16270:2012, BS 2000-606:2012. Automotive fuels. Determination of high-boiling components including fatty acid methyl esters in petrol. Gas chromatographic method
BS EN 16271:2012. Value management. Functional expression of the need and functional performance specification. Requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining a product
BS EN 16272-1:2012. Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performanceIntrinsic characteristics. Sound absorption in the laboratory under diffuse sound field conditions
BS EN 16272-2:2012. Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performanceIntrinsic characteristics. Airborne sound insulation in the laboratory under diffuse sound field conditions
BS EN 16272-3-1:2012. Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performanceNormalized railway noise spectrum and single number ratings for diffuse field applications
BS EN 16274:2012. Methods for analysis of allergens. Quantification of suspected fragrance allergens in consumer products. Step 1: GC analysis of ready-to-inject sample
BS EN 16276:2013. Evacuation Lighting in Road Tunnels
BS EN 16277:2012. Animal feeding stuffs. Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after microwave pressure digestion (extraction with 65% nitric acid and 30% hydrogen peroxide)
BS EN 16278:2012. Animal feeding stuffs. Determination of inorganic arsenic by hydride generation atomic absorption spectrometry (HG-AAS) after microwave extraction and separation by solid phase extraction (SPE)
BS EN 16279:2012. Animal feeding stuffs. Determination of fluoride content after hydrochloric acid treatment by ion-sensitive electrode method (ISE)
BS EN 1628:2011. Pedestrian doorsets, windows, curtain walling, grilles and shutters. Burglar resistance. Test method for the determination of resistance under static loading
BS EN 16280:2012. Breath alcohol test devices for general public. Requirements and test methods
BS EN 16281:2013. Child protective products. Consumer fitted child resistant locking devices for windows and balcony doors. Safety requirements and test methods
BS EN 16283:2013. Packaging. Flexible aluminium tubes. Test method to measure the force to pierce the membrane
BS EN 16284:2013. Packaging. Flexible laminate and plastic tubes. Test method to determine the adhesive strength of the membrane
BS EN 16285:2013. Packaging. Flexible aluminium tubes. Test method to measure the deformation of the aluminium tube body (Guillotine test)
BS EN 16286-1:2013. Railway applications. Gangway systems between vehiclesMain applications
BS EN 16286-2:2013. Railway applications. Gangway systems between vehiclesAcoustic measurements
BS EN 16289:2013. Glass packaging. Screw finishes for pressure capsules. MCA 7,5 RF finish
BS EN 1629:2011. Pedestrian doorsets, windows, curtain walling, grilles and shutters. Burglar resistance. Test method for the determination of resistance under dynamic loading
BS EN 16291-1:2013. Glass packaging. Screw finishes for pressure capsulesReturnable glass MCA 2 finish
BS EN 16291-2:2013. Glass packaging. Screw finishes for pressure capsulesOne way glass MCA 2 finish
BS EN 16292:2013. Glass packaging. Screw finishes. Depressed threads
BS EN 16293:2013. Packaging. Glass Packaging. Deep BVS finishes for still wines
BS EN 16294:2012, BS 2000-609:2012. Petroleum products and fat and oil derivatives. Determination of phosphorus content in fatty acid methyl esters (FAME). Optical emission spectral analysis with inductively coupled plasma (ICP OES)
BS EN 16296:2012. Imperfections in thermoplastics welded joints. Quality levels
BS EN 16297-1:2012. Pumps. Rotodynamic pumps. Glandless circulators. General requirements and procedures for testing and calculation of energy efficiency index (EEI)
BS EN 16297-2:2012. Pumps. Rotodynamic pumps. Glandless circulatorsCalculation of energy efficiency index (EEI) for standalone circulators
BS EN 16297-3:2012. Pumps. Rotodynamic pumps. Glandless circulatorsEnergy efficiency index (EEI) for circulators integrated in products
BS EN 16299:2013. Cathodic protection of external surfaces of above ground storage tankbases in contact with soil or foundations
BS EN 1630:2011. Pedestrian doorsets, windows, curtain walling, grilles and shutters. Burglar resistance. Test method for the determination of resistance to manual burglary attempts
BS EN 16300:2012, BS 2000-607:2012. Automotive fuels. Determination of iodine value in fatty acid methyl esters (FAME). Calculation method from gas chromatographic data
BS EN 16301:2013. Natural stone test methods. Determination of sensitivity to accidental staining
BS EN 16302:2013. Conservation of cultural heritage. Test methods. Measurement of water absorption by pipe method
BS EN 16304:2013. Automatic vent valves for gas burners and gas burning appliances
BS EN 16306:2013. Natural stone test methods. Determination of resistance of marble to thermal and moisture cycles
BS EN 16307-1:2013. Industrial trucks. Safety requirements and verificationSupplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
BS EN 16307-5:2013. Industrial trucks. Safety requirements and verificationSupplementary requirements for pedestrian-propelled trucks
BS EN 16310:2013. Engineering services. Terminology to describe engineering services for buildings, infrastructure and industrial facilities
BS EN 16311:2013. Engineering services. Terminology to describe engineering services for industrial products
BS EN 16312:2013. Intelligent transport systems. Automatic Vehicle and Equipment Registration (AVI/AEI). Interoperable application profile for AVI/AEI and Electronic Register Identification using dedicated short range communication
BS EN 16313:2013. Connections for heating and cooling appliances. Detachable connection with outside threaded pipe G ¾ A and inside cone
BS EN 16314:2013. Gas meters. Additional functionalities
BS EN 16317:2013. Fertilizers. Determination of trace elements. Determination of arsenic by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution
BS EN 16321-1:2013. Petrol vapour recovery during refuelling of motor vehicles at service stationsTest methods for the type approval efficiency assessment of petrol vapour recovery systems
BS EN 16321-2:2013. Petrol vapour recovery during refuelling of motor vehicles at service stationsTest methods for verification of vapour recovery systems at service stations
BS EN 16322:2013. Conservation of Cultural Heritage. Test methods. Determination of drying properties
BS EN 16325:2013. Guarantees of Origin related to energy. Guarantees of Origin for Electricity
BS EN 16328:2012. Fertilizers. Determination of 3,4-dimethyl-1H-pyrazole phosphate (DMPP). Method using high-performance liquid chromatography (HPLC)
BS EN 16329:2013, BS 2000-612:2013. Diesel and domestic heating fuels. Determination of cold filter plugging point. Linear cooling bath method
BS EN 16330:2013. Winter and road service area equipment. Power system and related controls. Power hydraulic system and electric
BS EN 16337:2013. Hardware for furniture. Strength and loading capacity of shelf supports
BS EN 16339:2013. Ambient air. Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
BS EN 1634-1:2000. Fire resistance tests for door and shutter assembliesFire doors and shutters
BS EN 1634-1:2008. Fire resistance and smoke control tests for door, shutter and, openable window assemblies and elements of building hardwareFire resistance tests for doors, shutters and openable windows
BS EN 16341:2012. Selection of standards and standard-like documents for defence products and services. Order of preference
BS EN 1634-2:2008. Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardwareFire resistance characterisation test for elements of building hardware
BS EN 16342:2013. Cosmetics. Analysis of cosmetic products. Quantitative determination ofzinc pyrithione, piroctone olamine and climbazole in surfactantcontaining cosmetic anti-dandruff products
BS EN 1634-3:2001. Fire resistance tests for door and shutter assembliesSmoke control doors and shutters
BS EN 1634-3:2004. Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardwareSmoke control test for door and shutter assemblies
BS EN 16343:2013. Cosmetics. Analysis of cosmetic products. Determination of 3-iodo-2-propynyl butylcarbamate (IPBC) in cosmetic preparations, LC-MS methods
BS EN 16344:2013. Cosmetics. Analysis of cosmetic products. Screening for UV-filters in cosmetic products and quantitative determination of 10 UV-filters by HPLC
BS EN 16345:2012, BS 2000-603:2012. Bitumen and bituminous binders. Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer
BS EN 16348:2013. Gas infrastructure. Safety Management System (SMS) for gas transmission infrastructure and Pipeline Integrity Management System (PIMS) for gas transmission pipelines. Functional requirements
BS EN 1635:1998. Bar coding. Test specifications. Bar code symbols
BS EN 16352:2013. Logistics. Specifications for reporting crime incidents
BS EN 16357:2013. Carbonate liming materials. Determination of reactivity. Automatic titration method with citric acid
BS EN 1636-3:2001. Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)Fittings
BS EN 1636-5:2001. Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)Fitness for purpose of the joints
BS EN 1636-6:2001. Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)Practices for installation
BS EN 1637:1999. Light conveyor belts. Test methods for the measurement of the electrical resistances
BS EN 16370:2013. Chemicals used for treatment of water intended for human consumption. Sodium chloride for on site electrochlorination using membrane cells
BS EN 16377:2013. Characterization of waste. Determination of brominated flame retardants (BFR) in solid waste
BS EN 16378:2013. Cereals. Determination of impurities content in maize (Zea mays, L.) and sorghum (Sorghum bicolor, L.)
BS EN 1638:1997, BS 2782-12:Method 1223D:1997. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test method for the effects of cyclic internal pressure
BS EN 1639:1997. Dentistry. Medical devices for dentistry. Instruments
BS EN 1639:2004. Dentistry. Medical devices for dentistry. Instruments
BS EN 1639:2009. Dentistry. Medical devices for dentistry. Instruments
BS EN 1640:1997. Dentistry. Medical devices for dentistry. Equipment
BS EN 1640:2004. Dentistry. Medical devices for dentistry. Equipment
BS EN 1640:2009. Dentistry. Medical devices for dentistry. Equipment
BS EN 1641:1997. Dentistry. Medical devices for dentistry. Materials
BS EN 1641:2004. Dentistry. Medical devices for dentistry. Materials
BS EN 1641:2009. Dentistry. Medical devices for dentistry. Materials
BS EN 16416:2013. Geosynthetic clay barriers. Determination of water flux index. Flexible wall permeameter method at constant head
BS EN 1642:1997. Dentistry. Medical devices for dentistry. Dental implants
BS EN 1642:2004. Dentistry. Medical devices for dentistry. Dental implants
BS EN 1642:2009. Dentistry. Medical devices for dentistry. Dental implants
BS EN 1642:2011. Dentistry. Medical devices for dentistry. Dental implants
BS EN 1643:2000. Valve proving systems for automatic shut-off valves for gas burners and gas appliances
BS EN 1644-1:1997. Test methods for nonwoven compresses for medical useNonwovens used in the manufacture of compresses
BS EN 1644-2:2000. Test methods for nonwoven compresses for medical useFinished compresses
BS EN 16445:2013. Ventilation for buildings. Air diffusion. Aerodynamic testing and rating for mixed flow application: non-isothermal procedure for cold jet
BS EN 1645-1:1999. Leisure accommodation vehicles. CaravansHabitation requirements relating to health and safety
BS EN 1645-1:2004+A1:2008. Leisure accommodation vehicles. CaravansHabitation requirements relating to health and safety
BS EN 1645-1:2012. Leisure accommodation vehicles. CaravansHabitation requirements relating to health and safety
BS EN 1645-2:1999. Leisure accommodation vehicles. CaravansUser payloads
BS EN 1645-2:2008. Leisure accommodation vehicles. CaravansUser payload
BS EN 1646-1:1999. Leisure accommodation vehicles. Motor caravansHabitation requirements relating to health and safety
BS EN 1646-1:2004+A1:2008. Leisure accommodation vehicles. Motor caravansHabitation requirements relating to health and safety
BS EN 1646-1:2012. Leisure accommodation vehicles. Motor caravansHabitation requirements relating to health and safety
BS EN 1646-2:1999. Leisure accommodation vehicles. Motor caravansUser payloads
BS EN 1646-2:2008. Leisure accommodation vehicles. Motor caravansUser payload
BS EN 16466-2:2013
BS EN 1647:1999. Leisure accommodation vehicles. Caravan holiday homes. Habitation requirements relating to health and safety
BS EN 1647:2004+A1:2008. Leisure accommodation vehicles. Caravan holiday homes. Habitation requirements relating to health and safety
BS EN 1647:2012. Leisure accommodation vehicles. Caravan holiday homes. Habitation requirements relating to health and safety
BS EN 1648-1:1998. Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations.Caravans
BS EN 1648-1:2004. Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installationsCaravans
BS EN 1648-1:2012. Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installationsCaravans
BS EN 1648-2:1998. Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations.Motor caravans
BS EN 1648-2:2005. Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installationsMotor caravans
BS EN 1648-2:2012. Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installationsMotor caravans
BS EN 1649:2004. AIDC technologies. Operational aspects affecting the reading of bar code symbols
BS EN 165:1996. Personal eye-protection. Vocabulary
BS EN 165:2005. Personal eye-protection. Vocabulary
BS EN 1650:1998. Chemical disinfectants and antiseptics. Quantitative suspension test for evaluation of fungicidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas. Test method and requirements (phase 2, step 1)
BS EN 1650:2008+A1:2013. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas. Test method and requirements (phase 2, step 1)
BS EN 165000-1:1996. Film and hybrid integrated circuitsGeneric specification. Capability approval procedure
BS EN 165000-2:1996. Film and hybrid integrated circuitsInternal visual inspection and special tests
BS EN 165000-3:1996. Film and hybrid integrated circuitsSelf-audit checklist and report for film and hybrid integrated circuit manufacturers
BS EN 165000-4:1996. Film and hybrid integrated circuitsCustomer information, product assessment level schedules and blank detail specification
BS EN 165000-5:1998. Film and hybrid integrated circuitsProcedure for qualification approval
BS EN 1651:1999. Paragliding equipment. Harnesses. Safety requirements and strength tests
BS EN 1652:1998. Copper and copper alloys. Plate, sheet, strip and circles for general purposes
BS EN 1653:1998. Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units
BS EN 1654:1998. Copper and copper alloys. Strip for springs and connectors
BS EN 1655:1997. Copper and copper alloys. Declarations of conformity
BS EN 1656:2000. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants used in veterinary field. Test method and requirements (phase 2/step 1)
BS EN 1656:2009. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area. Test method and requirements (phase 2, step 1)
BS EN 1657:2000. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants and antiseptics used in veterinary field. Test method and requirements (phase 2/step 1)
BS EN 1657:2005. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area. Test method and requirements (phase 2, step 1)
BS EN 1658:1997. Requirements for marking of in vitro diagnostic instruments
BS EN 1659:1997. In vitro diagnostic systems. Culture media for microbiology. Terms and definitions
BS EN 166:1996. Personal eye-protection. Specifications
BS EN 166:2002. Personal eye protection. Specifications
BS EN 166000:1996. Harmonized system of quality assessment for electronic components. Generic specification. Surface acoustic wave (SAW) filters
BS EN 1661:1998. Hexagon nuts with flange
BS EN 166100:1998. Harmonized system of quality assessment for electronic components. Sectional specification:surface acoustic wave (SAW) filters
BS EN 166101:1999. Harmonized system of quality assessment for electronic components. Blank detail specification: surface acoustic wave (SAW) filters. Capability approval
BS EN 1662:1998. Hexagon bolts with flange. Small series
BS EN 1663:1998. Prevailing torque type hexagon nuts with flange (with non-metallic insert)
BS EN 1664:1998. Prevailing torque type all-metal hexagon nuts with flange
BS EN 1665:1997. Hexagon bolts with flange. Heavy series
BS EN 1666:1998. Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread
BS EN 1667:1998. Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread
BS EN 1668:1997. Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels. Classification
BS EN 1669:1997. Aluminium and aluminium alloys. Test methods. Earing test for sheet and strip
BS EN 167:1995. Personal eye protection. Optical test methods
BS EN 167:2002. Personal eye protection. Optical test methods
BS EN 1670:1998. Building hardware. Corrosion resistance. Requirements and test methods
BS EN 1670:2007. Building hardware. Corrosion resistance. Requirements and test methods
BS EN 167000:1993. Harmonized system of quality assessment for electronic components. Generic specification: piezoelectric filters
BS EN 1671:1997. Pressure sewerage systems outside buildings
BS EN 167100:1996. Harmonized system of quality assessment for electronic components. Section specification: piezoelectric filters (Capability approval)
BS EN 167101:1996. Harmonized system of quality assessment for electronic components. Blank detail specification:piezoelectric filters (Capability approval)
BS EN 1672-2:1997. Food processing machinery. Basic conceptsHygiene requirements
BS EN 1672-2:2005+A1:2009. Food processing machinery. Basic conceptsHygiene requirements
BS EN 1673:2000+A1:2009. Food processing machinery. Rotary rack ovens. Safety and hygiene requirements
BS EN 1674:2000+A1:2009. Food processing machinery. Dough and pastry brakes. Safety and hygiene requirements
BS EN 1676:1997. Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications
BS EN 1676:2010. Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications
BS EN 1677-1:2000+A1:2008. Components for slings. SafetyForged steel components, Grade 8
BS EN 1677-2:2000+A1:2008. Components for slings. SafetyForged steel lifting hooks with latch, Grade 8
BS EN 1677-3:2001+A1:2008. Components for slings. SafetyForged steel self-locking hooks. Grade 8
BS EN 1677-4:2000+A1:2008. Components for slings. SafetyLinks, Grade 8
BS EN 1677-5:2001+A1:2008. Components for slings. SafetyForged steel lifting hooks with latch. Grade 4
BS EN 1677-6:2001+A1:2008. Components for slings. SafetyLinks. Grade 4
BS EN 1678:1998+A1:2010. Food processing machinery. Vegetable cutting machines. Safety and hygiene requirements
BS EN 1679-1:1998+A1:2011. Reciprocating internal combustion engines. SafetyCompression ignition engines
BS EN 168:1995. Personal eye protection. Non-optical test methods
BS EN 168:2002. Personal eye-protection. Non-optical test methods
BS EN 1680:1997, BS 2782-11:Method 1133A:1997. Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanism
BS EN 168000:1996. Harmonized system of quality assessment for electronic components. Generic specification: quartz crystal units
BS EN 1681:1996. EDI. Message. Delivery just in time message (DELJIT)
BS EN 168100:1995. Harmonized system of quality assessment for electronic components. Sectional specification: quartz crystal units (capability approval)
BS EN 168101:1997. Harmonized system of quality assessment for electronic components. Blank detail specification: quartz crystal units (capability approval)
BS EN 1682:1996. EDI. Message. Despatch advice message (DESADV)
BS EN 168200:1996. Harmonized system of quality assessment for electronic components. Sectional specification: quartz crystal units (qualification approval)
BS EN 168201:1996. Harmonized system of quality assessment for electronic components. Blank detail specification. Quartz crystal units. (Qualification approval)
BS EN 1683:1996. EDI. Message. Delivery schedule message (DELFOR)
BS EN 1684:1996. EDI. Message. Passenger list message (PAXLST)
BS EN 1685:1996. EDI. Message. Party information message (PARTIN)
BS EN 1686:1996. EDI. Message. Purchase order response message (ORDRSP)
BS EN 1687:1996. EDI. Message. Purchase order message (ORDERS)
BS EN 1688:1996. EDI. Message. Purchase order change request message (ORDCHG)
BS EN 1689:1996. EDI. Message. Inventory report message (INVRPT)
BS EN 169:1992. Specification for filters for personal eye-protection equipment used in welding and similar operations
BS EN 169:2002. Personal eye-protection. Filters for welding and related techniques. Transmittance requirements and recommended use
BS EN 1690:1996. EDI. Message. Invoice message (INVOIC)
BS EN 169000:1993. Harmonized system of quality assessment for electronic components. Generic specification. Quartz crystal controlled oscillators
BS EN 1691:1996. EDI. Message. Quality data message (QALITY)
BS EN 169100:1993. Harmonized system of quality assessment for electronic components. Sectional specification: quartz crystal controlled oscillators (capability approval)
BS EN 169101:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: quartz crystal controlled oscillators (capability approval)
BS EN 1692:1996. EDI. Message. Quote message (QUOTES)
BS EN 169200:1996. Harmonized system of quality assessment for electronic components. Sectional specification: Quartz crystal controlled oscillators (qualification approval)
BS EN 169201:1996. Harmonized system of quality assessment for electronic components. Blank detail specification. Quartz crystal controlled oscillators (Qualification approval)
BS EN 1693:1996. EDI. Message. Request for quote message (REQOTE)
BS EN 1694:1996. EDI. Message. Statement of account message (STATAC)
BS EN 1695:1996. EDI. Message. Superannuation contributions advice message (SUPCOT)
BS EN 1696:1996. EDI. Message. Superannuation maintenance message (SUPMAN)
BS EN 1697:1996. EDI. Message. Forwarding and transport shipment charge calculation message (IFTCCA)
BS EN 1698:1996. EDI. Message. Forwarding and transport rate information message (IFTRIN)
BS EN 1699:1996. EDI. Message. Forwarding and transport schedule and availability information message (IFTSAI)
BS EN 170:1992. Specification for ultraviolet filters used in personal eye-protection equipment
BS EN 170:2002. Personal eye-protection. Ultraviolet filters.Transmittance requirements and recommended use
BS EN 1700:1996. EDI. Message. International multimodal status report message (IFTSTA)
BS EN 170000:1999. Harmonized system of quality assessment for electronic components. Generic specification: waveguide type dielectric resonators
BS EN 1701:1996. EDI. Message. Price/sales catalogue message (PRICAT)
BS EN 170100:2001. Harmonized system of quality assessment for electronic components. Sectional specification: Waveguide type dielectric resonators
BS EN 170101:2001. Harmonized system of quality assessment for electronic components. Blank detail specification. Waveguide type dielectric resonators. Capability approval
BS EN 1702:1996. EDI. Message. Sanitary/phytosanitary certificate (SANCRT)
BS EN 1703:1996. EDI. Message. Sales data report message (SLSRPT)
BS EN 1704:1997, BS 2782-11:Method 1133B:1997. Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after temperature cycling under bending
BS EN 1705:1997, BS 2782-11:Method 1133C:1997. Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after an external blow
BS EN 1706:1998. Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties
BS EN 1706:2010. Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties
BS EN 1707:1997. Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment. Lock fittings
BS EN 1708-1:1999. Welding. Basic weld joint details in steelPressurized components
BS EN 1708-1:2010. Welding. Basic welded joint details in steelPressurized components
BS EN 1708-2:2000. Welding. Basic weld joint details in steelNon-internal pressurized components
BS EN 1708-3:2012. Welding. Basic weld joint details in steelClad, buttered and lined pressurized components
BS EN 1709:2004. Safety requirements for cableways for cableway installations designed to carry persons. Precommissioning inspection, maintenance and operational inspection and checks
BS EN 171:1992. Specification for infra-red filters used in personal eye-protection equipment
BS EN 171:2002. Personal eye-protection. Infrared filters. Transmittance requirements and recommended use
BS EN 1710:2005+A1:2008. Equipment and components intended for use in potentially explosive atmospheres in underground mines
BS EN 171000:2001. Harmonized system of quality assessment for electronic components. Generic specification. Filters using waveguide type dielectric resonators
BS EN 1711:2000. Non-destructive examination of welds. Eddy current examination of welds by complex plane analysis
BS EN 1712:1997. Non-destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels
BS EN 1713:1998. Non-destructive testing of welds. Ultrasonic testing. Characterization of indications in welds
BS EN 1714:1998. Non destructive testing of welded joints. Ultrasonic testing of welded joints
BS EN 1715-1:1998. Aluminium and aluminium alloys. Drawing stock.General requirements and technical conditions for inspection and delivery
BS EN 1715-1:2008. Aluminium and aluminium alloys. Drawing stockGeneral requirements and technical conditions for inspection and delivery
BS EN 1715-2:1998. Aluminium and aluminium alloys. Drawing stock.Specific requirements for electrical applications
BS EN 1715-2:2008. Aluminium and aluminium alloys. Drawing stockSpecific requirements for electrical applications
BS EN 1715-3:1998. Aluminium and aluminium alloys. Drawing stock.Specific requirements for mechanical uses (excluding welding)
BS EN 1715-3:2008. Aluminium and aluminium alloys. Drawing stockSpecific requirements for mechanical uses (excluding welding)
BS EN 1715-4:1998. Aluminium and aluminium alloys. Drawing stock.Specific requirements for welding applications
BS EN 1715-4:2008. Aluminium and aluminium alloys. Drawing stockSpecific requirements for welding applications
BS EN 1716:1997, BS 2782-11:Method 1108T:1997. Plastics piping systems. Polyethylene (PE) tapping tees. Test method for impact resistance of an assembled tapping tee
BS EN 1717:2000. Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow
BS EN 1718:1999. Light conveyor belts. Test method for the measurement of the electrostatic field generated by a running light conveyor belt
BS EN 1719:1999. Adhesives for paper and board, packaging and disposable sanitary products. Tack measurement for pressure-sensitive adhesives. Determination of loop tack
BS EN 172:1995. Specification for sunglare filters used in personal eye-protectors for industrial use
BS EN 1720:1999. Adhesives for paper and board, packaging and disposable sanitary products. Determination of dispersability
BS EN 1721:1999. Adhesives for paper and board, packaging and disposable sanitary products. Tack measurement for pressure sensitive adhesives. Determination of rolling ball tack
BS EN 1722:1999. Light conveyor belts. Test method for the determination of the maximum tensile strength
BS EN 1723:2000. Light conveyor belts. Method of test for the determination of the relaxed elastic modulus
BS EN 1724:1999. Light conveyor belts. Test method for the determination of the coefficient of friction
BS EN 1725:1998. Domestic furniture. Beds and mattresses. Safety requirements and test methods
BS EN 1726-1:1999. Safety of industrial trucks. Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 NGeneral requirements
BS EN 1726-2:2000. Safety of industrial trucks. Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 NAdditional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads
BS EN 1727:1998. Domestic furniture. Storage furniture. Safety requirements and test methods
BS EN 1728:2001. Domestic furniture. Seating. Test methods for the determination of strength and durability
BS EN 1728:2012. Furniture. Seating. Test methods for the determination of strength and durability
BS EN 1729-1:2006. Furniture. Chairs and tables for educational institutionsFunctional dimensions
BS EN 1729-2:2006. Furniture. Chairs and tables for educational institutionsSafety requirements and test methods
BS EN 1729-2:2012. Furniture. Chairs and tables for educational institutionsSafety requirements and test methods
BS EN 1730:2000. Domestic furniture. Tables. Test methods for determination of strength, durability and stability
BS EN 1730:2012. Furniture. Tables. Test methods for the determination of stability, strength and durability
BS EN 1731:1998. Mesh type eye and face protectors for industrial and non-industrial use against mechanical hazards and/or heat
BS EN 1731:2006. Personal eye protection. Mesh eye and face protectors
BS EN 1733:1998. Suction catheters for use in the respiratory tract
BS EN 1733:2002. Suction catheters for use in the respiratory tract
BS EN 1734:1997. Rubber- or plastics- coated fabrics. Determination of resistance to water penetration. Low-pressure method
BS EN 1735:1997. Rubber- or plastics- coated fabrics. Determination of flexibility
BS EN 1736:2000. Refrigerating systems and heat pumps. Flexible pipe elements, vibration isolators and expansion joints. Requirements, design and installation
BS EN 1736:2008. Refrigerating systems and heat pumps. Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes. Requirements, design and installation
BS EN 1737:1998. Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
BS EN 1738:1998. Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete
BS EN 1739:1998. Determination of shear strength for in-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
BS EN 1739:2007. Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure
BS EN 174:1997. Personal eye protection. Ski goggles for downhill skiing
BS EN 174:2001. Personal eye-protection. Ski goggles for downhill skiing
BS EN 1740:1998. Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components)
BS EN 1741:1998. Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
BS EN 1742:1998. Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
BS EN 1744-1:1998. Tests for chemical properties of aggregatesChemical analysis
BS EN 1744-1:2009+A1:2012. Tests for chemical properties of aggregatesChemical analysis
BS EN 1744-3:2002. Tests for chemical properties of aggregatesPreparation of eluates by leaching of aggregates
BS EN 1744-4:2005. Tests for chemical properties of aggregatesDetermination of water susceptibility of fillers for bituminous mixtures
BS EN 1744-5:2006. Tests for chemical properties of aggregatesDetermination of acid soluble chloride salts
BS EN 1744-6:2006. Tests for chemical properties of aggregatesDetermination of the influence of recycled aggregate extract on the initial setting time of cement
BS EN 1744-7:2012. Tests for chemical properties of aggregatesDetermination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)
BS EN 1744-8:2012. Tests for chemical properties of aggregatesSorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates
BS EN 1745:2002. Masonry and masonry products. Methods for determining design thermal values
BS EN 1745:2012. Masonry and masonry products. Methods for determining thermal properties
BS EN 1746:1999. Safety of machinery. Guidance for the drafting of the noise clauses of safety standards
BS EN 1748-1:1998. Glass in buildingBorosilicate glasses
BS EN 1748-1-1:2004. Glass in building. Special basic productsBorosilicate glasses
BS EN 1748-1-2:2004. Glass in building. Special basic productsBorosilicate glasses
BS EN 1748-2:1998. Glass in buildingGlass ceramics
BS EN 1748-2-1:2004. Glass in building. Special basic productsGlass ceramics
BS EN 1748-2-2:2004. Glass in building. Special basic productsGlass ceramics
BS EN 175:1997. Personal protection. Equipment for eye and face protection during welding and allied processes
BS EN 1751:1999. Ventilation for buildings. Air terminal devices. Aerodynamic testing of dampers and valves
BS EN 175100:1993. Harmonized system of quality assessment for electronic components. Sectional specification. Two part and edge socket connectors for printed board applications
BS EN 175101-802:2000. Harmonized system of quality assessment for electronic components. Detail specificationTwo-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows
BS EN 175101-809:2000. Harmonized system of quality assessment for electronic components. Detail specificationDetail Specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75101-801, with assessed quality
BS EN 175101-809:2004. Harmonized system of quality assessment for electronic components. Detail specificationTwo-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality
BS EN 175200:1992. Harmonized system of quality assessment for electronic components: sectional specification: circular connectors
BS EN 175200:1997. Harmonized system of quality assessment for electronic components. Sectional specification: circular connectors
BS EN 175201-804:2000. Harmonized system of quality assessment for electronic componentsDetail specification. Circular connectors. Round contacts, size diameter 1,6 mm, threaded coupling
BS EN 1753:1997. Magnesium and magnesium alloys. Magnesium alloy ingots and castings
BS EN 175300:1992. Harmonized system of quality assessment for electronic components. Sectional specification: rectangular connectors for frequencies below 3 MHz
BS EN 175300:1997. Harmonized system of quality assessment for electronic components. Sectional specification:rectangular connectors for frequencies below 3 MHz
BS EN 175301-801:2000. Harmonized system of quality assessment for electronic componentsDetail specification. High density rectangular connectors, round removable crimp contacts
BS EN 175301-801:2006. Detail specification. High density rectangular connectors, round removable crimp contacts
BS EN 175301-803:2000. Harmonized system of quality assessment for electronic componentsDetail specification. Rectangular connectors. Flat contacts, 0,8 mm thickness, locking screw not detachable
BS EN 175301-803:2006. Detail specification: rectangular connectors. Flat contacts, 0,8 mm thickness, locking screw not detachable
BS EN 1754:1997. Magnesium and magnesium alloys. Magnesium and magnesium alloy anodes, ingots and castings. Designation system
BS EN 1755:2000+A2:2013. Safety of industrial trucks. Operation in potentially explosive atmospheres. Use in flammable gas, vapour, mist and dust
BS EN 175500:1997. Harmonized system of quality assessment for electronic components. Sectional specification:cable outlet accessories for connectors, including qualification approval and capability approval
BS EN 1756-1:2001+A1:2008. Tail lifts. Platform lifts for mounting on wheeled vehicles. Safety requirementsTail lifts for goods
BS EN 1756-2:2004+A1:2009. Tail lifts. Platform lifts for mounting on wheeled vehicles. Safety requirementsTail lifts for passengers
BS EN 1757-1:2001. Safety of industrial trucks. Pedestrian propelled trucksStacker trucks
BS EN 1757-2:2001. Safety of industrial trucks. Pedestrian propelled trucksPallet trucks
BS EN 1757-3:2002. Safety of industrial trucks. Pedestrian propelled trucksPlatform trucks
BS EN 1757-4:2003. Safety of industrial trucks. Pedestrian propelled trucksScissor lift pallet-trucks
BS EN 1758:1998. Copper and copper alloys. Strip for lead frames
BS EN 1759-1:2004. Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designatedSteel flanges, NPS 1/2 to 24
BS EN 1759-3:2003. Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class designatedCopper alloy flanges
BS EN 1759-4:2003. Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class designatedAluminium alloy flanges
BS EN 1760-1:1997+A1:2009. Safety of machinery. Pressure sensitive protective devicesGeneral principles for the design and testing of pressure sensitive mats and pressure sensitive floors
BS EN 1760-2:2001+A1:2009. Safety of machinery. Pressure sensitive protective devicesGeneral principles for the design and testing of pressure sensitive edges and pressure sensitive bars
BS EN 1760-3:2004+A1:2009. Safety of machinery. Pressure sensitive protective devicesGeneral principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices
BS EN 1761:1999. Rubber hoses and hose assemblies for fuel truck delivery. Specification
BS EN 1762:1998. Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification
BS EN 1762:2003. Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification
BS EN 1763-1:2001. Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phaseRequirements for rubber and plastics tubing and hoses
BS EN 1765:1998. Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies
BS EN 1765:2004. Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies
BS EN 1766:2000. Products and systems for the protection and repair of concrete structures. Test methods. Reference concretes for testing
BS EN 1767:1999. Products and systems for the protection and repair of concrete structures. Test methods. Infrared analysis
BS EN 1770:1998. Products and systems for the protection and repair of concrete structures. Test methods. Determination of the coefficient of thermal expansion
BS EN 1771:2004. Products and systems for the protection and repair of concrete structures. Test methods. Determination of injectability and splitting test
BS EN 1772:1995. Surface active agents. Determination of wetting power by immersion
BS EN 1772:2000. Surface active agents. Determination of wetting power by immersion
BS EN 1773:1997. Textiles. Fabrics. Determination of width and length
BS EN 1774:1997. Zinc and zinc alloys. Alloys for foundry purposes. Ingot and liquid
BS EN 1775:1998. Gas supply. Gas pipework in buildings. Maximum operating pressure ≤ 5 bar. Functional recommendations
BS EN 1775:2007. Gas supply. Gas pipework for buildings. Maximum operating pressure less than or equal to 5 bar. Functional recommendations
BS EN 1776:1999. Gas supply. Natural gas measuring stations. Functional requirements
BS EN 1777:2004+A1:2009. Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing
BS EN 1777:2010. Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing
BS EN 1778:2000. Characteristic values for welded thermoplastics constructions. Determination of allowable stresses and moduli for design of thermoplastics equipment
BS EN 1779:1999. Non-destructive testing. Leak testing. Criteria for method and technique selection
BS EN 1780-1:1997. Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castingsNumerical designation system
BS EN 1780-1:2002. Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castingsNumerical designation system
BS EN 1780-2:1997. Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castingsChemical symbol based designation system
BS EN 1780-2:2002. Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castingsChemical symbol based designation system
BS EN 1780-3:1997. Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castingsWriting rules for chemical composition
BS EN 1780-3:2002. Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castingsWriting rules for chemical composition
BS EN 1782:1998+A1:2009. Tracheal tubes and connectors
BS EN 1783:1997. Matches. Performance requirements, safety and classification
BS EN 1784:1997. Foodstuffs. Detection of irradiated food containing fat. Gas chromatographic analysis of hydrocarbons
BS EN 1784:2003. Foodstuffs. Detection of irradiated food containing fat. Gas chromatographic analysis of hydrocarbons
BS EN 1785:1997. Foodstuffs. Detection of irradiated food containing fat. Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones
BS EN 1785:2003. Foodstuffs. Detection of irradiated food containing fat. Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones
BS EN 1786:1997. Foodstuffs. Detection of irradiated food containing bone. Method by ESR spectroscopy
BS EN 1787:1997. Foodstuffs. Detection of irradiated food containing cellulose. Method by ESR spectroscopy
BS EN 1787:2000. Foodstuffs. Detection of irradiated food containing cellulose by ESR spectroscopy
BS EN 1788:1997. Foodstuffs. Detection of irradiated food from which silicate minerals can be isolated. Method by thermoluminescence
BS EN 1788:2001. Foodstuffs. Thermoluminescence detection of irradiated food from which silicate minerals can be isolated
BS EN 1789:2000. Medical vehicles and their equipment. Road ambulances
BS EN 1789:2007+A1:2010. Medical vehicles and their equipment. Road ambulances
BS EN 179:1998. Building hardware. Emergency exit devices operated by a lever handle or push pad. Requirements and test methods
BS EN 179:2008. Building hardware. Emergency exit devices operated by a lever handle or push pad, for use on escape routes. Requirements and test methods
BS EN 1790:1998. Road marking materials. Preformed road markings
BS EN 1791:1997. Surface active agents. Fatty alkyl dimethyl amine oxides. Determination of the amine oxide content
BS EN 1792:1998. Welding. Multilingual list of terms for welding and related processes
BS EN 1792:2003. Welding. Multilingual list of terms for welding and related processes
BS EN 1793-1:1998. Road traffic noise reducing devices. Test method for determining the acoustic performanceIntrinsic characteristics of sound absorption
BS EN 1793-1:2012. Road traffic noise reducing devices. Test method for determining the acoustic performanceIntrinsic characteristics of sound absorption
BS EN 1793-2:1998. Road traffic noise reducing devices. Test method for determining the acoustic performanceIntrinsic characteristics of airborne sound insulation
BS EN 1793-2:2012. Road traffic noise reducing devices. Test method for determining the acoustic performanceIntrinsic characteristics of airborne sound insulation under diffuse sound field conditions
BS EN 1793-3:1998. Road traffic noise reducing devices. Test method for determining the acoustic performanceNormalized traffic noise spectrum
BS EN 1793-6:2012. Road traffic noise reducing devices. Test method for determining the acoustic performanceIntrinsic characteristics. In situ values of airborne sound insulation under direct sound field conditions
BS EN 1794-1:1998. Road traffic noise reducing devices. Non-acoustic performance.Mechanical performance and stability requirements
BS EN 1794-1:2003. Road traffic noise reducing devices. Non-acoustic performance.Mechanical performance and stability requirements
BS EN 1794-1:2011. Road traffic noise reducing devices. Non-acoustic performanceMechanical performance and stability requirements
BS EN 1794-2:1998. Road traffic noise reducing devices. Non-acoustic performance.General safety and environmental requirements
BS EN 1794-2:2003 Version 1
BS EN 1794-2:2003 Version 1. Road traffic noise reducing devices. Non-acoustic performance.General safety and environmental requirements
BS EN 1794-2:2003. Road traffic noise reducing devices. Non-acoustic performance.General safety and environmental requirements
BS EN 1794-2:2011. Road traffic noise reducing devices. Non-acoustic performanceGeneral safety and environmental requirements
BS EN 1795:1998. Transportable gas cylinders (excluding LPG). Procedures for change of gas service
BS EN 1796:2006+A1:2008. Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
BS EN 1796:2013. Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
BS EN 1797:2001. Cryogenic vessels. Gas/material compatibility
BS EN 1797-1:1998. Cryogenic vessels. Gas/material compatibilityOxygen compatibility
BS EN 1799:1999. Products and systems for the protection and repair of concrete structures. Test methods. Tests to measure the suitability of structural bonding agents for application to concrete surface
BS EN 1800:2006. Transportable gas cylinders. Acetylene cylinders. Basic requirements, definitions and type testing
BS EN 180000:1996. Harmonized system of quality assessment for electronic components. Generic specification: Fibre optic attenuators
BS EN 1801:1999. Transportable gas cylinders. Filling conditions for single acetylene cylinders
BS EN 180101:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed fibre optic attenuators
BS EN 1802:2002. Transportable gas cylinders. Periodic inspection and testing of seamless aluminium alloy gas cylinders
BS EN 1803:2002. Transportable gas cylinders. Periodic inspection and testing of welded carbon steel gas cylinders
BS EN 1804-1:2001+A1:2010. Machines for underground mines. Safety requirements for hydraulic powered roof supportsSupport units and general requirements
BS EN 1804-2:2001+A1:2010. Machines for underground mines. Safety requirements for hydraulic powered roof supportsPower set legs and rams
BS EN 1804-3:2006+A1:2010. Machines for underground mines. Safety requirements for hydraulic powered roof supportsHydraulic control systems
BS EN 1806:2000. Chimneys. Clay/ceramic flue blocks for single wall chimneys. Requirements and test methods
BS EN 1806:2006. Chimneys Clay/ceramic flue blocks for single wall chimneys Requirements and test methods
BS EN 1807:1999+A1:2009. Safety of woodworking machines. Band sawing machines
BS EN 1807-1:2013. Safety of woodworking machines. Band sawing machinesTable band saws and band re-saws
BS EN 1807-2:2013. Safety of woodworking machines. Band sawing machinesLog sawing machines
BS EN 1808:1999+A1:2010. Safety requirements on suspended access equipment. Design calculations, stability criteria, construction. Tests
BS EN 1809:1998. Diving accessories. Buoyancy compensators. Functional and safety requirements, test methods
BS EN 1810:1998. Body-piercing post assemblies. Reference test method for determination of nickel content by flame atomic absorption spectrometry
BS EN 181000:1995. Harmonized system of quality assessment for electronic components. Generic specification. Fibre optic branching devices
BS EN 1811:1998+A1:2008. Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin
BS EN 1811:2011. Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin
BS EN 181101:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fibre optic branching devices. Type: non wavelength selective transmissive star
BS EN 181102:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fibre optic branching devices. Type: wavelength selective transmission star
BS EN 181103:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fibre optic branching devices. Type: non wavelength selective transmissive star for telecommunication application
BS EN 181104:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fibre optic branching devices. Type: wavelength selective transmissive star for telecommunication application
BS EN 1813:1998. Textile floor coverings. Determination of wool fibre integrity using an abrasion machine
BS EN 1814:1998. Textile floor coverings. Determination of resistance to damage at cut edges using the modified Vettermann drum test
BS EN 1814:2005. Textile floor coverings. Determination of resistance to damage at cut edges using the modified Vettermann drum test
BS EN 1815:1998. Resilient and textile floor coverings. Assessment of static electrical propensity
BS EN 1816:1998. Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing
BS EN 1816:2010. Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing
BS EN 1817:1998. Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings
BS EN 1817:2010. Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings
BS EN 1818:1999. Resilient floor coverings. Determination of the effect of loaded heavy duty castors
BS EN 1819:1998. Laryngoscopes for tracheal intubation. Particular requirements
BS EN 1820:1997. Anaesthetic reservoir bags
BS EN 1820:2005+A1:2009. Anaesthetic reservoir bags
BS EN 1821-1:1997. Electrically propelled road vehicles. Measurement of road operating abilityPure electric vehicles
BS EN 1821-2:1999. Electrically propelled road vehicles. Measurement of road operating abilityThermal electric hybrid vehicles
BS EN 1822-1:1998. High efficiency air filters (HEPA and ULPA)Classification, performance testing, marking
BS EN 1822-1:2009. High efficiency air filters (EPA, HEPA and ULPA)Classification, performance testing, marking
BS EN 1822-2:1998. High efficiency air filters (HEPA and ULPA)Aerosol production, measuring equipment, particle counting statistics
BS EN 1822-2:2009. High efficiency air filters (EPA, HEPA and ULPA)Aerosol production, measuring equipment, particle counting statistics
BS EN 1822-3:1998. High efficiency air filters (HEPA and ULPA)Testing flat sheet filter media
BS EN 1822-3:2009. High efficiency air filters (EPA, HEPA and ULPA)Testing flat sheet filter media
BS EN 1822-4:2000. High efficiency air filters (HEPA and ULPA)Determining leakage of filter element (scan method)
BS EN 1822-4:2009. High efficiency air filters (EPA, HEPA and ULPA)Determining leakage of filter elements (scan method)
BS EN 1822-5:2000. High efficiency air filters (HEPA and ULPA)Determining the efficiency of filter element
BS EN 1822-5:2009. High efficiency air filters (EPA, HEPA and ULPA)Determining the efficiency of filter elements
BS EN 1824:1998. Road marking materials. Road trials
BS EN 1824:2011. Road marking materials. Road trials
BS EN 1825-1:2004. Grease separatorsPrinciples of design, performance and testing, marking and quality control
BS EN 1825-2:2002. Grease separatorsSelection of nominal size, installation, operation and maintenance
BS EN 1826:1997. Biotechnology. Large-scale process and production. Control procedures for raw materials
BS EN 1827:1999+A1:2009. Respiratory protective devices. Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only. Requirements, testing, marking
BS EN 1828:2002. Health informatics. Categorial structure for classifications and coding systems of surgical procedures
BS EN 1829-1:2010. High pressure water jet machines. Safety requirementsMachines
BS EN 1829-2:2008. High-pressure water jet machines. Safety requirementsHoses, hose lines and connectors
BS EN 1833:1997. EDI. Message. Syntax and service report message (CONTRL)
BS EN 1834-1:2000. Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheresGroup II engines for use in flammable gas and vapour atmospheres
BS EN 1834-2:2000. Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheresGroup I engines for use in underground workings susceptible to firedamp and/or combustible dust
BS EN 1834-3:2000. Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheresGroup II engines for use in flammable dust atmospheres
BS EN 1835:2000. Respiratory protective devices. Light duty construction compressed air line breathing apparatus incorporating a helmet or a hood. Requirements, testing, marking
BS EN 1836:1997. Personal eye protection. Sunglasses and sunglare filters for general use and filters for direct observation of the sun
BS EN 1836:2005. Personal eye-equipment. Sunglasses and sunglare filters for general use and filters for direct observation of the sun
BS EN 1837:1999+A1:2009. Safety of machinery. Integral lighting of machines
BS EN 1838:1999, BS 5266-7:1999. Lighting applications. Emergency lighting
BS EN 1838:2013. Lighting applications. Emergency lighting
BS EN 1839:2003. Determination of explosion limits of gases and vapours
BS EN 1839:2012. Determination of explosion limits of gases and vapours
BS EN 1841:1999. Adhesives. Test methods for floor coverings and wall coverings. Determination of dimensional changes of a linoleum floor covering in contact with an adhesive
BS EN 1842:1997. Plastics. Thermoset moulding compounds (SMC-BMC). Determination of compression moulding shrinkage
BS EN 1844:2001. Flexible sheets for waterproofing. Determination of resistance to ozone. Plastic and rubber sheets for roof waterproofing
BS EN 1844:2013. Flexible sheets for waterproofing. Determination of resistance to ozone. Plastic and rubber sheets for roof waterproofing
BS EN 1845:1999. Footwear manufacturing machines. Footwear moulding machines. Safety requirements
BS EN 1845:2007. Footwear manufacturing machines. Footwear moulding machines. Safety requirements
BS EN 1846-1:1998. Firefighting and rescue service vehiclesNomenclature and designation
BS EN 1846-1:2011. Firefighting and rescue service vehiclesNomenclature and designation
BS EN 1846-2:2001+A3:2009. Firefighting and rescue service vehiclesCommon requirements. Safety and performance
BS EN 1846-2:2009+A1:2013. Firefighting and rescue service vehiclesCommon requirements. Safety and performance
BS EN 1846-3:2002+A1:2008. Firefighting and rescue service vehiclesPermanently installed equipment. Safety and performance
BS EN 1846-3:2013. Firefighting and rescue service vehiclesPermanently installed equipment. Safety and performance
BS EN 1847:2001. Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Methods for exposure to liquid chemicals including water
BS EN 1847:2009. Flexible sheets for waterproofing. Plastics and rubber sheets for roof waterproofing. Methods for exposure to liquid chemicals, including water
BS EN 1848-1:2000. Flexible sheets for waterproofing. Determination of length, width and straightnessBitumen sheets for roof waterproofing
BS EN 1848-2:2001. Flexible sheets for waterproofing. Determination of length, width and straightnessPlastic and rubber sheets for roof waterproofing
BS EN 1849-1:2000. Flexible sheets for waterproofing. Determination of thickness and mass per unit areaBitumen sheets for roof waterproofing
BS EN 1849-2:2001. Flexible sheets for waterproofing. Determination of thickness and mass per unit areaPlastic and rubber sheets for roof waterproofing
BS EN 1849-2:2009. Flexible sheets for waterproofing. Determination of thickness and mass per unit areaPlastic and rubber sheets
BS EN 1850-1:2000. Flexible sheets for waterproofing. Determination of visible defectsBitumen sheets for roof waterproofing
BS EN 1850-2:2001. Flexible sheets for waterproofing. Determination of visible defectsPlastic and rubber sheets for roof waterproofing
BS EN 1852-1:1998. Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP)Specifications for pipes, fittings and the system
BS EN 1852-1:2009. Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP)Specifications for pipes, fittings and the system
BS EN 1853:1999+A1:2009. Agricultural machinery. Trailers with tipping body. Safety
BS EN 1854:1997. Pressure sensing devices for gas burners and gas burning appliances
BS EN 1854:2006. Pressure sensing devices for gas burners and gas burning appliances
BS EN 1854:2010. Pressure sensing devices for gas burners and gas burning appliances
BS EN 1856-1:2003. Chimneys. Requirements for metal chimneysSystem chimney products
BS EN 1856-1:2009. Chimneys. Requirements for metal chimneysSystem chimney products
BS EN 1856-2:2004. Chimneys. Requirements for metal chimneysMetal liners and connecting flue pipes
BS EN 1856-2:2009. Chimneys. Requirements for metal chimneysMetal flue liners and connecting flue pipes
BS EN 1857:2003+A1:2008. Chimneys. Components. Concrete flue liners
BS EN 1857:2010. Chimneys. Components. Concrete flue liners
BS EN 1858:2003. Chimneys. Components. Concrete flue blocks
BS EN 1858:2008+A1:2011. Chimneys. Components. Concrete flue blocks
BS EN 1859:2000. Chimneys. Metal chimneys. Test methods
BS EN 1859:2009+A1:2013. Chimneys. Metal chimneys. Test methods
BS EN 186000-1:1994. Harmonized system of quality assessment for electronic components. Generic specification. Connector sets for optical fibres and cablesRequirements, test methods and qualification approval procedures
BS EN 186001:1994. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connectors for optical fibres and cables. Environmental category I
BS EN 186002:1994. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connector for optical fibres and cables. Environmental category II
BS EN 186003:1994. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connector for optical fibres and cables. Environmental category III
BS EN 186004:1994. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connector for optical fibres and cables. Environmental category IV
BS EN 186005:1994. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connector for optical fibres and cables. Environmental category V
BS EN 186006-1:1996. Harmonized system of quality assessment for electronic components. Blank detail specification. Connectors for optical fibres and cables for military useEnvironmental category VI
BS EN 1860-1:2003. Appliances, solid fuels and firelighters for barbecuingBarbecues burning solid fuels. Requirements and test methods
BS EN 1860-2:2005. Appliances, solid fuels and firelighters for barbecueingBarbecue charcoal and barbecue charcoal briquettes. Requirements and test methods
BS EN 1860-3:2003. Appliances, solid fuels and firelighters for barbecuingFirelighters for igniting solid fuels for use in barbecue appliances. Requirements and test methods
BS EN 1860-4:2004. Appliances, solid fuels and firelighters for barbecueingSingle use barbecues burning solid fuels. Requirements and test methods
BS EN 1861:1998. Refrigerating systems and heat pumps. System flow diagrams and piping and instrument diagrams. Layout and symbols
BS EN 186100:1995. Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Types F-SMA
BS EN 186110:1995. Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type FC
BS EN 186130:1996. Harmonized system of quality assessment for electronic components. Sectional specification. Connector sets for optical fibres and cables. Type LSA
BS EN 186150:1997, CECC 86150:1994. Connector sets for optical fibres and cables. Type OCCA-BU
BS EN 186160:1997, CECC 86160:1994. Connector sets for optical fibres and cables. Type OCCA-PC
BS EN 186170:1998. Harmonized system of quality assessment for electronic components. Sectional specification:connector sets for optical fibres and cables. Type RCC
BS EN 186180:1996. Harmonized system of quality assessment for electronic components. Sectional specification. Connector sets for optical fibres and cables. Type LSB
BS EN 1862:1998, BS 2782-12:Method 1209C:1998. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the relative flexural creep factor following exposure to a chemical environment
BS EN 186210:1996. Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type CF08
BS EN 186220:1996. Harmonized system of quality assessment for electronic components. Sectional specification: Connector sets for optical fibres and cables. Type LSC
BS EN 186230:1996. Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type LSF
BS EN 186240:1996. Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type MT
BS EN 186260:1998. Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type SC
BS EN 186270:1998. Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type LSH
BS EN 186290:1998. Harmonized system of quality assessment for electronic components. Connector sets for optical fibres and cables. Type MPO
BS EN 186300:1999. Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables type MSC
BS EN 1863-1:2000. Glass in buildings. Heat strengthened soda lime silicate glassDefinition and description
BS EN 1863-1:2011. Glass in building. Heat strengthened soda lime silicate glassDefinition and description
BS EN 186310:1999. Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type MF
BS EN 1863-2:2004. Glass in building. Heat strengthened soda lime silicate glassEvaluation of conformity. Product standard
BS EN 1864:1997. Inland navigation vessels. Wheelhouse and control position. Types, safety requirements
BS EN 1864:2008. Inland navigation vessels. Wheelhouse. Ergonomic and safety requirements
BS EN 1865:2000. Specifications for stretchers and other patient handling equipment used in road ambulances
BS EN 1865-1:2010. Patient handling equipment used in road ambulancesGeneral stretcher systems and patient handling equipment
BS EN 1865-2:2010. Patient handling equipment used in road ambulancesPower assisted stretcher
BS EN 1865-3:2012. Patient handling equipment used in road ambulancesHeavy duty stretcher
BS EN 1865-4:2012. Patient handling equipment used in road ambulancesFoldable patient transfer chair
BS EN 1865-5:2012. Patient handling equipment used in road ambulancesStretcher support
BS EN 1866:1999. Mobile fire extinguishers
BS EN 1866:2005. Mobile fire extinguishers
BS EN 1866-1:2007. Mobile fire extinguishersCharacteristics, performance and test methods
BS EN 1867:1997. Machine readable cards. Health care applications. Numbering system and registration procedure for issuer identifiers
BS EN 1868:1997. Personal protective equipment against falls from a height. List of equivalent terms
BS EN 1869:1997. Fire blankets
BS EN 187000:1994. Generic specification for optical fibre cables
BS EN 1870-1:1999. Safety of woodworking machines. Circular sawing machinesCircular saw benches (with and without sliding table) and dimension saws
BS EN 1870-1:2007+A1:2009. Safety of woodworking machines. Circular sawing machinesCircular saw benches (with and without sliding table), dimension saws and building site saws
BS EN 1870-10:2003+A1:2009. Safety of woodworking machines. Circular sawing machinesSingle blade automatic and semi-automatic up-cutting cross-cut sawing machines
BS EN 1870-10:2013. Safety of woodworking machines. Circular sawing machinesSingle blade automatic and semi-automatic up-cutting cross-cut sawing machines
BS EN 1870-11:2003+A1:2009. Safety of woodworking machines. Circular sawing machinesSemi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)
BS EN 1870-12:2003+A1:2009. Safety of woodworking machines. Circular sawing machinesPendulum cross-cut sawing machines
BS EN 1870-13:2007+A2:2012. Safety of woodworking machines. Circular sawing machinesHorizontal beam panel sawing machines
BS EN 1870-14:2007+A2:2012. Safety of woodworking machines. Circular sawing machinesVertical panel sawing machines
BS EN 1870-15:2004+A1:2009. Safety of woodworking machines. Circular sawing machinesMultiblade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
BS EN 1870-15:2012. Safety of woodworking machines. Circular sawing machinesMulti-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
BS EN 1870-16:2005+A1:2009. Safety of woodworking machines. Circular sawing machinesDouble mitre sawing machines for V-cutting
BS EN 1870-16:2012. Safety of woodworking machines. Circular sawing machinesDouble mitre sawing machines for V cutting
BS EN 1870-17:2007+A2:2009. Safety of woodworking machines. Circular sawing machinesManual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws)
BS EN 1870-17:2012. Safety of woodworking machines. Circular sawing machinesManual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)
BS EN 1870-18:2013. Safety of woodworking machines. Circular sawing machinesDimension saws
BS EN 1870-2:1999. Safety of woodworking machines. Circular sawing machinesHorizontal beam panel saws and vertical panel saws
BS EN 1870-3:2001+A1:2009. Safety of woodworking machines. Circular sawing machinesDown cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
BS EN 1870-4:2001+A1:2009. Safety of woodworking machines. Circular sawing machinesMultiblade rip sawing machines with manual loading and/or unloading
BS EN 1870-4:2012. Safety of woodworking machines. Circular sawing machinesMultiblade rip sawing machines with manual loading and/or unloading
BS EN 1870-5:2002+A2:2012. Safety of woodworking machines. Circular sawing machinesCircular saw-benches/up-cutting cross-cut sawing machines
BS EN 1870-6:2002+A1:2009. Safety of woodworking machines. Circular sawing machines Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading
BS EN 1870-7:2002+A1:2009. Safety of woodworking machines. Circular sawing machinesSingle blade log sawing machines with integrated feed table and manual loading and/or unloading
BS EN 1870-7:2012. Safety of woodworking machines. Circular sawing machinesSingle blade log sawing machines with integrated feed table and manual loading and/or unloading
BS EN 1870-8:2001+A1:2009. Safety of woodworking machines. Circular sawing machinesSingle blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
BS EN 1870-8:2012. Safety of woodworking machines. Circular sawing machinesSingle blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
BS EN 1870-9:2000+A1:2009. Safety of woodworking machines. Circular sawing machinesDouble blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
BS EN 1870-9:2012. Safety of woodworking machines. Circular sawing machinesDouble blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
BS EN 1871:2000. Road marking materials. Physical properties
BS EN 187101:1995. Harmonized system of quality assessment for electronic components. Family specification: optical telecommunication cables to be used in ducts or direct buried application
BS EN 187102:1995. Harmonized system of quality assessment for electronic components. Family specification: optical aerial telecommunication cables
BS EN 187103:2003. Harmonized system of quality assessment for electronic components. Family specification. Optical fibre cables for indoor applications
BS EN 187104:2001. Harmonized system of quality assessment for electronic components. Family specification. Single-mode optical fibre cables to be used as underwater cables for lakes and river crossings, etc.
BS EN 187105:2002. Single mode optical cable (duct/direct buried installation)
BS EN 187200:2001. Harmonized systems of quality assessment for electronic components. Sectional specificaton. Optical cables to be used along electrical power lines (OCEPL)
BS EN 1873:2005. Prefabricated accessories for roofing. Individual roof lights of plastics. Product specification and test methods
BS EN 1875-3:1998. Rubber and plastics-coated fabrics. Determination of tear strengthTrapezoidal method
BS EN 1876-1:1998. Rubber- or plastics-coated fabrics. Low temperature tests.Bending test
BS EN 1876-2:1998. Rubber- or plastics-coated fabrics. Low temperature tests.Impact test on loop
BS EN 1877-1:2000. Products and systems for the protection and repair of concrete structures. Test methods. Reactive functions related to epoxy resinsDetermination of epoxy equivalent
BS EN 1877-2:2000. Products and systems for the protection and repair of concrete structures. Test methods. Reactive functions related to epoxy resinsDetermination of amine functions using the total basicity number
BS EN 188000:1994. Generic specification for optical fibres
BS EN 1881:2006. Products and systems for the protection and repair of concrete structures. Test methods. Testing of anchoring products by the pull-out method
BS EN 188100:1995. Harmonized system of quality assessment for electronic components. Sectional specification: single-mode (SM) optical fibre
BS EN 188101:1995. Harmonized system of quality assessment for electronic components. Family specification: single-mode dispersion unshifted (B1.1) optical fibre
BS EN 188102:1996. Harmonized system of quality assessment for electronic components. Family specification: single-mode dispersion shifted (B2) optical fibre
BS EN 1882:1999. Feather and down. Test methods. Determination of the commercial mass of a lot of feather and down
BS EN 188200:1996. Harmonized system of quality assessment for electronic components. Sectional specification. Optical fibres A1 category graded index multimode
BS EN 188201:1996. Harmonized system of quality assessment for electronic components. Family specification: A1a graded index multimode optical fibres
BS EN 188202:1996. Harmonized system of quality assessment for electronic components. Family specification: A1b graded index multimode optical fibres
BS EN 1883:1999. Feather and down. Sampling in view of tests
BS EN 1884:1999. Feather and down. Test methods. Determination of microbiological state
BS EN 1885:1998. Feather and down. Terms and definitions
BS EN 1886:1998. Ventilation for buildings. Air handling units. Mechanical performance
BS EN 1886:2007. Ventilation for buildings. Air handling units. Mechanical performance
BS EN 1888:2003. Child care articles. Wheeled child conveyances. Safety requirements and test methods
BS EN 1888:2012. Child care articles. Wheeled child conveyances. Safety requirements and test methods
BS EN 1889-1:2003. Machines for underground mines. Mobile machines working underground. SafetyRubber tyred vehicles
BS EN 1889-1:2011. Machines for underground mines. Mobile machines working underground. SafetyRubber tyred vehicles
BS EN 1889-2:2003+A1:2009. Machines for underground mines. Mobile machines working Underground. Safety Rail locomotives
BS EN 1890:1999. Surface active agents. Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide
BS EN 1890:2006. Surface active agents. Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide
BS EN 1891:1998. Personal protective equipment for the prevention of falls from a height. Low stretch kernmantel ropes
BS EN 1892:2005. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of tensile properties
BS EN 1893:2005. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of tensile properties
BS EN 1894:2005. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of shear strength by compression loading of notched specimens
BS EN 1895:2001. Adhesives for paper and board, packaging and disposable sanitary products. 180°. "T" peel test for a flexible-to-flexible assembly
BS EN 1896:2001. Adhesives for paper and board, packaging and disposable sanitary products. Determination of tensile strength and elongation
BS EN 1897:2001. Geotextiles and geotextile-related products. Determination of the compressive creep properties
BS EN 1898:2001. Specifications for flexible intermediate bulk containers (FIBCs) for non-dangerous goods
BS EN 1899-1:1998, BS 6068-2.63:1998. Water quality. Determination of biochemical oxygen demand after n days (BODn)Dilution and seeding method with allylthiourea addition
BS EN 1899-2:1998, BS 6068-2.64:1998. Water quality. Determination of biochemical oxygen demand after n days (BODn)Method for undiluted samples
BS EN 19:1992. Marking of general purpose industrial valves
BS EN 19:2002. Industrial valves. Marking of metallic valves
BS EN 1900:1998. Materials and articles in contact with foodstuffs. Non-metallic tableware. Terminology
BS EN 190000:1996. Harmonized system of quality assessment for electronic components. Generic specification: monolithic integrated circuits
BS EN 190100:1993. Harmonized system of quality assessment for electronic components: sectional specification: digital monolithic integrated circuits
BS EN 190101:1994. Specification for harmonized system of quality assessment for electronic components. Family specification: digital integrated TTL circuits series 54, 64, 74, 84
BS EN 190102:1994. Specification for harmonized system of quality assessment for electronic components. Family specification: digital integrated TTL-SCHOTTKY circuits, series 54S, 64S, 74S, 84S
BS EN 190103:1994. Specification for harmonized system of quality assessment for electronic components. Family specification: digital integrated TTL low power SCHOTTKY, circuits, series 54LS, 64LS, 74LS, 84LS
BS EN 190106:1994. Specification for harmonized system of quality assessment for electronic components. Family specification. TTL advanced low power SCHOTTKY digital integrated circuits series 54 ALS, 74 ALS
BS EN 190107:1994. Specification for harmonized system of quality assessment for electronic components. Family specification. TTL FAST digital integrated circuits series 54 F, 74 F
BS EN 190108:1994. Specification for harmonized system of quality assessment for electronic components. Family specification. TTL advanced SCHOTTKY digital integrated circuits series 54 AS, 74 AS
BS EN 190109:1994. Specification for harmonized system of quality assessment for electronic components. Family specification: digital integrated HC MOS circuits series HC/HCT/HCU
BS EN 190110:1994. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: digital microprocessor integrated circuits
BS EN 190116:1994. Harmonized system of quality assessment for electronic components. Family specification: AC MOS digital integrated circuits
BS EN 1902:1999. Adhesives. Test methods for adhesives for floor coverings and wall coverings. Shear test
BS EN 1903:1999. Adhesives. Test method for adhesives for plastic or rubber floor coverings or wall coverings. Determination of dimensional changes after accelerated ageing
BS EN 1903:2008. Adhesives. Test method for adhesives for plastic or rubber floor coverings or wall coverings. Determination of dimensional changes after accelerated ageing
BS EN 1904:2000. Precious metals. The finenesses of solders used with precious metal jewellery alloys
BS EN 1905:1999, BS 2782-11:Method 1105C:1999. Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material. Method for assessment of the PVC content based on total chlorine content
BS EN 1906:2002. Building hardware. Lever handles and knob furniture. Requirements and test methods
BS EN 1906:2010. Building hardware. Lever handles and knob furniture. Requirements and test methods
BS EN 1906:2012. Building hardware. Lever handles and knob furniture. Requirements and test methods
BS EN 1907:2005. Safety requirements for cableway installations designed to carry persons. Terminology
BS EN 1908:2004. Safety requirements for cableways installations designed to carry person. Tensioning Devices
BS EN 1909:2004. Safety requirements for cableway installations designed to carry persons. Recovery and evacuation
BS EN 1910:2000. Wood and parquet flooring and wood panelling and cladding. Determination of dimensional stability
BS EN 1910:2013. Wood flooring and wood panelling and cladding. Determination of dimensional stability
BS EN 1911:2010. Stationary source emissions. Determination of mass concentration of gaseous chlorides expressed as HCl. Standard reference method
BS EN 1911-1:1998. Stationary source emissions. Manual method of determination of HCISampling of gases
BS EN 1911-2:1998. Stationary source emissions. Manual method of determination of HCIGaseous compounds absorption
BS EN 1911-3:1998. Stationary source emissions. Manual method of determination of HCIAbsorption solutions analysis and calculation
BS EN 1912:1998. Structural timber. Strength classes. Assignment of visual grades and species
BS EN 1912:2004+A4:2010. Structural timber. Strength classes. Assignment of visual grades and species
BS EN 1912:2012. Structural Timber. Strength classes. Assignment of visual grades and species
BS EN 1914:1997. Inland navigation vessels. Ship's boats
BS EN 1914:2009. Inland navigation vessels. Work boats, ship's boats and lifeboats
BS EN 1915-1:2001+A1:2009. Aircraft ground support equipment. General requirementsBasic safety requirements
BS EN 1915-1:2013. Aircraft ground support equipment. General requirementsBasic safety requirements
BS EN 1915-2:2001+A1:2009. Aircraft ground support equipment. General requirementsStability and strength requirements, calculations and test methods
BS EN 1915-3:2004+A1:2009. Aircraft ground support equipment. General requirementsVibration measurement methods and reduction
BS EN 1915-4:2004+A1:2009. Aircraft ground support equipment. General requirementsNoise measurement methods and reduction
BS EN 1916:2002. Concrete pipes and fittings, unreinforced, steel fibre and reinforced
BS EN 1917:2002. Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced
BS EN 1918-1:1998. Gas supply systems. Underground gas storage.Functional recommendations for storage in aquifers
BS EN 1918-2:1998. Gas supply systems. Underground gas storage.Functional recommendations for storage in oil and gas fields
BS EN 1918-3:1998. Gas supply systems. Underground gas storage.Functional recommendations for storage in solution-mined salt cavities
BS EN 1918-4:1998. Gas supply systems. Underground gas storage.Functional recommendations for storage in rock caverns
BS EN 1918-5:1998. Gas supply systems. Underground gas storage.Functional recommendations for surface facilities
BS EN 1919:2000. Transportable gas cylinders. Cylinders for liquefied gases (excluding acetylene and LPG). Inspection at time of filling
BS EN 1920:2000. Transportable gas cylinders. Cylinders for compressed gases (excluding acetylene). Inspection at time of filling
BS EN 1922:1998. Information technology. Character repertoire and coding for interworking with Telex services
BS EN 1923:1998. European character repertoires and their coding. 8-bit single-byte coding
BS EN 1925:1999. Natural stone test methods. Determination of water absorption coefficient by capillarity
BS EN 1926:1999. Natural stone test methods. Determination of compressive strength
BS EN 1926:2006. Natural stone test methods. Determination of uniaxial compressive strength
BS EN 1927-1:2008. Qualitative classification of softwood round timberSpruces and firs
BS EN 1927-2:2008. Qualitative classification of softwood round timberPines
BS EN 1927-3:2008. Qualitative classification of softwood round timberLarches and Douglas fir
BS EN 1928:2000. Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of watertightness
BS EN 1929-1:1998. Basket trolleysRequirements and tests for basket trolleys with or without a child carrying facility
BS EN 1929-2:2004. Basket trolleysRequirements, tests and inspection for basket trolleys with of without a child carrying facility, intended to be used on passenger conveyors
BS EN 1929-3:2005. Basket trolleysRequirements and tests for basket trolleys with additional goods carrying facility(ies), with or without a child carrying facility
BS EN 1929-4:2005. Basket trolleysRequirements and tests for basket trolleys with additional goods carrying facility(ies), with or without a child carrying facility, intended to be used on passenger conveyors
BS EN 1929-7:2005. Basket trolleysRequirements and tests for basket trolleys with baby and child carrying facilities
BS EN 1930:2000. Child care articles. Safety barriers. Safety requirements and test methods
BS EN 1930:2011. Child use and care articles. Safety barriers. Safety requirements and test methods
BS EN 1931:2000. Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of water vapour transmission properties
BS EN 1932:2001. External blinds and shutters. Resistance to wind loads. Method of testing
BS EN 1932:2013. External blinds and shutters. Resistance to wind loads. Method of testing and performance criteria
BS EN 1933:1999. Exterior blinds. Resistance to load due to water accumulation. Test method
BS EN 1934:1998. Thermal performance of buildings. Determination of thermal resistance by hot box method using heat flow meter. Masonry
BS EN 1935:2002. Building hardware. Single-axis hinges. Requirements and test methods
BS EN 1936:1999. Natural stone test methods. Determination of real density and apparent density and of total and open porosity
BS EN 1936:2006. Natural stone test methods. Determination of real density and apparent density, and of total and open porosity
BS EN 1937:1999. Test method for hydraulic setting floor smoothing and/or levelling compounds. Standard mixing procedures
BS EN 1938:1999. Personal eye protection. Goggles for motorcycle and moped users
BS EN 1938:2010. Personal eye protection. Goggles for motorcycle and moped users
BS EN 1939:1997. Self adhesive tapes. Measurement of peel adhesion from stainless steel or from its own backing
BS EN 1939:2003. Self adhesive tapes. Determination of peel adhesion properties
BS EN 1940:1996. Self adhesive tapes. Measurement of breaking strength
BS EN 1941:1996. Self adhesive tapes. Measurement of elongation at break
BS EN 1942:1996. Self adhesive tapes. Measurement of thickness
BS EN 1942:2003. Self adhesive tapes. Measurement of thickness
BS EN 1942:2008. Self adhesive tapes. Measurement of thickness
BS EN 1943:1996. Self adhesive tapes. Measurement of static shear adhesion
BS EN 1943:2002. Self adhesive tapes. Measurement of static shear adhesion
BS EN 1944:1996. Self adhesive tapes. Measurement of unwind adhesion at low speed
BS EN 1945:1996. Self adhesive tapes. Measurement of quick stick
BS EN 1946-1:1999. Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer propertiesCommon criteria
BS EN 1946-2:1999. Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer propertiesMeasurements by guarded hot plate method
BS EN 1946-3:1999. Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer propertiesMeasurements by heat flow meter method
BS EN 1946-4:2000. Measurements by hot box methods
BS EN 1946-5:2000. Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer propertiesMeasurements by pipe test methods
BS EN 1947:2002. Fire-fighting hoses. Semi-rigid delivery hoses and hose assemblies for pumps and vehicles
BS EN 1948-1:1997. Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFsSampling
BS EN 1948-1:2006. Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBsSampling of PCDDs/PCDFs
BS EN 1948-2:1997. Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFsExtraction and clean-up
BS EN 1948-2:2006. Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBsExtraction and clean-up of PCDDs/PCDFs
BS EN 1948-3:1997. Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFsIdentification and quantification (www.tecert.com)
BS EN 1948-3:2006. Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBsIdentification and quantification of PCDDs/PCDFs
BS EN 1948-4:2010. Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBsSampling and analysis of dioxin-like PCBs
BS EN 1949:2002. Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and in other vehicles
BS EN 1949:2011+A1:2013. Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles
BS EN 1953:1998+A1:2009. Atomizing and spraying equipment for coating materials. Safety requirements
BS EN 1953:2013. Atomising and spraying equipment for coating materials. Safety requirements
BS EN 1957:2000. Domestic furniture. Beds and mattresses. Test methods for the determination of functional characteristics
BS EN 1957:2012. Furniture. Beds and mattresses. Test methods for the determination of functional characteristics and assessment criteria
BS EN 196000:1993. Harmonized system of quality assessment for electronic components. Generic specification. Electromechanical switches
BS EN 196-1:1995. Methods of testing cementDetermination of strength
BS EN 196-1:2005. Methods of testing cementDetermination of strength
BS EN 196-10:2006. Methods of testing cementDetermination of the water soluble chromium (VI) content of cement
BS EN 196103:2000. Blank detail specification: Rotary switches. Assessment level Y
BS EN 196-2:1995. Methods of testing cementChemical analysis of cement
BS EN 196-2:2005. Methods of testing cementChemical analysis of cement
BS EN 196-2:2013. Method of testing cementChemical analysis of cement
BS EN 196-21:1992. Methods of testing cementDetermination of the chloride, carbon dioxide and alkali content of cement
BS EN 196-3:1995. Methods of testing cementDetermination of setting time and soundness
BS EN 1963:1998. Textile floor coverings. Tests using the Lisson Tretrad machine
BS EN 196-3:2005+A1:2008. Methods of testing cementDetermination of setting times and soundness
BS EN 1963:2007. Textile floor coverings. Tests using the Lisson Tretrad machine
BS EN 196403:2000. Harmonized systems of quality assessment for electronic components. Blank detail specification: push button switches. Assessment level Y
BS EN 1964-2:2001
BS EN 196-5:1995. Methods of testing cementPozzolanicity test for pozzolanic cements
BS EN 196-5:2005. Methods of testing cementPozzolanicity test for pozzolanic cements
BS EN 196-5:2011. Methods of testing cementPozzolanicity test for pozzolanic cement
BS EN 196500:1993. Harmonized system of quality assessment for electronic components. Sectional specification. Membrane switches including blank detail specification EN 196501
BS EN 1965-1:2001. Structural adhesives. CorrosionDetermination and classification of corrosion to a copper substrate
BS EN 1965-1:2011. Structural adhesives. CorrosionDetermination and classification of corrosion to a copper substrate
BS EN 1965-2:2001. Structural adhesives. CorrosionDetermination and classification of corrosion to a brass substrate
BS EN 1965-2:2011. Structural adhesives. CorrosionDetermination and classification of corrosion to a brass substrate
BS EN 196-6:1992. Methods of testing cementDetermination of fineness
BS EN 1966:2002. Structural adhesives. Characterisation of a surface by measuring adhesion by means of the three point bending method
BS EN 1966:2009. Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method
BS EN 196-6:2010. Methods of testing cementDetermination of fineness
BS EN 196-7:1992. Methods of testing cementMethods of taking and preparing samples of cement
BS EN 1967:2002. Structural adhesives. Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method
BS EN 196-7:2007. Methods of testing cementMethods of taking and preparing samples of cement
BS EN 1968:2002. Transportable gas cylinders. Periodic inspection and testing of seamless steel gas cylinders
BS EN 196-8:2003. Methods of testing cementHeat of hydration. Solution method
BS EN 196-8:2010. Methods of testing cementHeat of hydration. Solution method
BS EN 1969:2000. Surfaces for sports areas. Determination of thickness of synthetic sports surfaces
BS EN 196-9:2003. Methods of testing cementHeat of hydration. Semi-adiabatic method
BS EN 196-9:2010. Methods of testing cementHeat of hydration. Semi-adiabatic method
BS EN 1970:2000. Adjustable beds for disabled persons. Requirements and test methods
BS EN 1971:1999. Copper and copper alloys. Eddy current test for tubes
BS EN 197-1:2000. CementComposition, specifications and conformity criteria for common cements
BS EN 197-1:2011. CementComposition, specifications and conformity criteria for common cements
BS EN 1971-1:2011. Copper and copper alloys. Eddy current test for measuring defects on seamless round copper and copper alloy tubesTest with an encircling test coil on the outer surface
BS EN 1971-2:2011. Copper and copper alloys. Eddy current test for measuring defects on seamless round copper and copper alloy tubesTest with an internal probe on the inner surface
BS EN 1972:1997. Diving accessories. Snorkels. Safety requirements and test methods
BS EN 197-2:2000. CementConformity evaluation
BS EN 1974:1998+A1:2009. Food processing machinery. Slicing machines. Safety and hygiene requirements
BS EN 197-4:2004. CementComposition, specifications and conformity criteria for low early strength blastfurnace cements
BS EN 1975:2000. Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litre
BS EN 1976:1998. Copper and copper alloys. Cast unwrought copper products
BS EN 1976:2012. Copper and copper alloys. Cast unwrought copper products
BS EN 1977:1998. Copper and copper alloys. Copper drawing stock (wire rod)
BS EN 1977:2013. Copper and copper alloys. Copper drawing stock (wire rod)
BS EN 1978:1998. Copper and copper alloys. Copper cathodes
BS EN 1979:1999, BS 2782-11:Method 1110C:1999. Plastics piping and ducting systems. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam
BS EN 198:2008. Sanitary appliances. Baths made from crosslinked cast acrylic sheets. Requirements and test methods
BS EN 1981:1998. Copper and copper alloys. Master alloys
BS EN 1981:2003. Copper and copper alloys. Master alloys
BS EN 1982:1999. Copper and copper alloys. Ingots and castings
BS EN 1982:2008. Copper and copper alloys. Ingots and castings
BS EN 1983:2006. Industrial valves. Steel ball valves
BS EN 1983:2013. Industrial valves. Steel ball valves
BS EN 1984:2000. Industrial valves. Steel gate valves
BS EN 1984:2010. Industrial valves. Steel gate valves
BS EN 1985:1999. Walking aids. General requirements and test methods
BS EN 1986-1:1997. Electrically propelled road vehicles. Measurement of energy performancesPure electric vehicles
BS EN 1986-2:2001. Electrically propelled road vehicles. Measurement of energy performancesThermal electric hybrid vehicles
BS EN 1987-1:1997. Electrically propelled road vehicles. Specific requirements for safetyOn board energy storage
BS EN 1987-2:1997. Electrically propelled road vehicles. Specific requirements for safetyFunctional safety means and protection against failures
BS EN 1987-3:1998. Electrically propelled road vehicles. Specific requirements for safetyProtection of users against electrical hazards
BS EN 1988-1:1998. Foodstuffs. Determination of sulfiteOptimized Monier-Williams method
BS EN 1988-2:1998. Foodstuffs. Determination of sulfiteEnzymatic method
BS EN 1989:2000, BS 2782-11:Method 1112E:2000. Thermoplastics piping systems. Joints for buried non-pressure sewerage applications. Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure
BS EN 1990:2002+A1 (Package). Eurocode. Basis of structural design. Compilation of BS EN 1990:2002 and the National Annex.
BS EN 1990:2002+A1:2005. Eurocode. Basis of structural design
BS EN 1991-1-1:2002. Eurocode 1. Actions on structuresGeneral actions
BS EN 1991-1-2:2002. Eurocode 1. Actions on structures General actions. Actions on structures exposed to fire
BS EN 1991-1-3:2003. Eurocode 1. Actions on structuresGeneral actions
BS EN 1991-1-4:2005+A1:2010. Eurocode 1. Actions on structuresGeneral actions
BS EN 1991-1-5:2003. Eurocode 1. Actions on structuresGeneral actions
BS EN 1991-1-6:2005. Eurocode 1. Actions on structures General actions. Actions during execution
BS EN 1991-1-7:2006. Eurocode 1. Actions on structuresGeneral actions
BS EN 1991-2:2003. Eurocode 1. Actions on structuresTraffic loads on bridges
BS EN 1991-3:2006. Eurocode 1. Actions on structures Actions induced by cranes and machinery
BS EN 1991-4:2006. Eurocode 1. Actions on structuresSilos and tanks
BS EN 1992-1-1:2004. Eurocode 2. Design of concrete structuresGeneral rules and rules for buildings
BS EN 1992-1-2:2004. Eurocode 2. Design of concrete structuresGeneral rules
BS EN 1992-2:2005. Eurocode 2. Design of concrete structuresConcrete bridges. Design and detailing rules
BS EN 1992-3:2006. Eurocode 2. Design of concrete structuresLiquid retaining and containing structures
BS EN 1993-1-1:2005. Eurocode 3. Design of steel structuresGeneral rules and rules for buildings
BS EN 1993-1-10:2005. Eurocode 3. Design of steel structuresMaterial toughness and through-thickness properties
BS EN 1993-1-11:2006. Eurocode 3. Design of steel structuresDesign of structures with tension components
BS EN 1993-1-12:2007. Eurocode 3. Design of steel structuresAdditional rules for the extension of EN 1993 up to steel grades S 700
BS EN 1993-1-2:2005. Eurocode 3. Design of steel structuresGeneral rules
BS EN 1993-1-3:2006. Eurocode 3. Design of steel structuresGeneral rules
BS EN 1993-1-4:2006. Eurocode 3. Design of steel structuresGeneral rules
BS EN 1993-1-5:2006. Eurocode 3. Design of steel structuresPlated structural elements
BS EN 1993-1-6:2007. Eurocode 3. Design of steel structuresStrength and Stability of Shell Structures
BS EN 1993-1-7:2007. Eurocode 3. Design of steel structuresPlated structures subject to out of plane loading
BS EN 1993-1-8:2005. Eurocode 3. Design of steel structuresDesign of joints
BS EN 1993-1-9:2005. Eurocode 3. Design of steel structuresFatigue
BS EN 1993-2:2006. Eurocode 3. Design of steel structuresSteel bridges
BS EN 1993-3-1:2006. Eurocode 3. Design of steel structuresTowers, masts and chimneys
BS EN 1993-3-2:2006. Eurocode 3. Design of steel structuresTowers, masts and chimneys
BS EN 1993-4-1:2007. Eurocode 3. Design of steel structuresSilos
BS EN 1993-4-2:2007. Eurocode 3. Design of steel structuresTanks
BS EN 1993-4-3:2007. Eurocode 3. Design of steel structuresPipelines
BS EN 1993-5:2007. Eurocode 3. Design of steel structuresPiling
BS EN 1993-6:2007. Eurocode 3. Design of steel structuresCrane supporting structures
BS EN 1994-1-1:2004. Eurocode 4. Design of composite steel and concrete structuresGeneral rules and rules for buildings
BS EN 1994-1-2:2005. Eurocode 4. Design of composite steel and concrete structuresGeneral rules
BS EN 1994-2:2005. Eurocode 4. Design of composite steel and concrete structuresGeneral rules and rules for bridges
BS EN 1995-1-1:2004+A1:2008. Eurocode 5. Design of timber structuresGeneral
BS EN 1995-1-2:2004. Eurocode 5. Design of timber structuresGeneral
BS EN 1995-2:2004. Eurocode 5. Design of timber structuresBridges
BS EN 1996-1-1:2005+A1:2012. Eurocode 6. Design of masonry structuresGeneral rules for reinforced and unreinforced masonry structures
BS EN 1996-1-2:2005. Eurocode 6. Design of masonry structuresGeneral rules. Structural fire design
BS EN 1996-2:2006. Eurocode 6. Design of masonry structuresDesign considerations, selection of materials and execution of masonry
BS EN 1996-3:2006. Eurocode 6. Design of masonry structuresSimplified calculation methods for unreinforced masonry structures
BS EN 1997-1:2004. Eurocode 7. Geotechnical designGeneral rules
BS EN 1997-2:2007. Eurocode 7. Geotechnical designGround investigation and testing
BS EN 1998-1:2004+A1:2013. Eurocode 8: Design of structures for earthquake resistance General rules, seismic actions and rules for buildings
BS EN 1998-2:2005+A2:2011. Eurocode 8. Design of structures for earthquake resistanceBridges
BS EN 1998-3:2005. Eurocode 8. Design of structures for earthquake resistanceAssessment and retrofitting of buildings
BS EN 1998-4:2006. Eurocode 8. Design of structures for earthquake resistanceSilos, tanks and pipelines
BS EN 1998-5:2004. Eurocode 8. Design of structures for earthquake resistanceFoundations, retaining structures and geotechnical aspects
BS EN 1998-6:2005. Eurocode 8. Design of structures for earthquake resistanceTowers, masts and chimneys
BS EN 1999-1-1:2007+A1:2009. Eurocode 9. Design of aluminium structuresGeneral structural rules
BS EN 1999-1-2:2007. Eurocode 9. Design of aluminium structuresStructural fire design
BS EN 1999-1-3:2007+A1:2011. Eurocode 9. Design of aluminium structuresStructures susceptible to fatigue
BS EN 1999-1-4:2007+A1:2011. Eurocode 9. Design of aluminium structuresCold-formed structural sheeting
BS EN 1999-1-5:2007. Eurocode 9. Design of aluminium structuresShell structures
BS EN 2:1992. Classification of fires
BS EN 200:1992. Sanitary tapware. General technical specifications for single taps and mixer taps (nominal size 1/2) PN 10. Minimum flow pressure of 0.05 MPa (0.5 bar)
BS EN 200:2008. Sanitary tapware. Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification
BS EN 2000:1992. Quality assurance. EN aerospace products. Approval of the quality system of manufacturers
BS EN 2002-005:2007. Aerospace series. Test methods for metallic materialsUninterrupted creep and stress-rupture testing
BS EN 2002-1:2005. Aerospace series. Metallic materials. Test methodsTensile testing at ambient temperature
BS EN 2002-2:2005. Aerospace series. Metallic materials. Test methodsTensile testing at elevated temperature
BS EN 2003-009:2007. Aerospace series. Test methods. Titanium and titanium alloysDetermination of surface contamination
BS EN 2003-010:2007. Aerospace series. Titanium and titanium alloys. Test methodsSampling for determination of hydrogen content
BS EN 2004-1:1993. Test methods for aluminium and aluminium alloy products.Determination of electrical conductivity of wrought aluminium alloys
BS EN 2004-5:1993. Test methods for aluminium and aluminium alloy products.Determination of cladding thickness and copper diffusion of clad semi-finished products
BS EN 2009:1992. Bearings. Airframe rolling rigid, single row ball bearings in steel diameter series 8 and 9. Dimensions and loads
BS EN 20090-1:1993, ISO 90-1:1986. Light gauge metal containers. Definitions and determination methods for dimensions and capacitiesOpen-top cans
BS EN 20090-2:1993, ISO 90/2-1986. Light gauge metal containers. Definitions and determination methods for dimensions and capacitiesGeneral use containers
BS EN 20090-3:1993, ISO 90-3:1986. Light gauge metal containers. Definitions and determination methods for dimensions and capacitiesAerosol cans
BS EN 20-1:1992. Wood preservatives. Determination of the protective effectiveness against Lyctus brunneus (Stephens)Application by surface treatment (laboratory method)
BS EN 201:1997. Rubber and plastics machines. Injection moulding machines. Safety requirements
BS EN 201:2009. Plastics and rubber machines. Injection moulding machines. Safety requirements
BS EN 20105-A01:1993, ISO 105-A01:1989. Textiles. Tests for colour fastnessGeneral principles of testing
BS EN 20105-A02:1993, ISO 105-A02:1987. Textiles. Tests for colour fastnessGrey scale for assessing change in colour
BS EN 20105-A02:1994 Colour Scale. Textiles. Tests for colour fastnessGrey scale for assessing change in colour (including half-steps)
BS EN 20105-A02:1995, ISO 105-A02:1993. Textiles. Tests for colour fastnessGrey scale for assessing change in colour
BS EN 20105-A03:1993, ISO 105-A03:1987. Textiles. Tests for colour fastnessGrey scale for assessing staining
BS EN 20105-A03:1994 Colour Scale. Textiles. Tests for colour fastnessGrey scale for assessing staining (including half-steps)
BS EN 20105-A03:1995, ISO 105-A03:1993. Textiles. Tests for colour fastnessGrey scale for assessing staining
BS EN 20105-B02:1993, ISO 105-B02:1988. Textiles. Tests for colour fastnessColour fastness artificial light (xenon arc fading lamp test)
BS EN 20105-C01:1993, ISO 105-C01:1989. Textiles. Tests for colour fastness.Colour fastness to washing: Test 1
BS EN 20105-C02:1993, ISO 105-C02:1989. Textiles. Tests for colour fastness.Colour fastness to washing: Test 2
BS EN 20105-C03:1993, ISO 105-C03:1989. Textiles. Tests for colour fastness.Colour fastness to washing: Test 3
BS EN 20105-C04:1993, ISO 105-C04:1989. Textiles. Tests for colour fastness.Colour fastness to washing: Test 4
BS EN 20105-C05:1993, ISO 105-C05:1989. Textiles. Tests for colour fastness.Colour fastness to washing: Test 5
BS EN 20105-C06:1993, ISO 105-C06:1987. Textiles. Tests for colour fastnessColour fastness to domestic and commercial laundering
BS EN 20105-N01:1995, ISO 105-N01:1993. Textiles. Tests for colour fastnessColour fastness to bleaching: hypochlorite
BS EN 2011:1989. Specification for bearings - airframe rolling rigid single row ball bearings in corrosion resisting steel diameter series 8 and 9. Dimensions and loads
BS EN 2012:1989. Specification for bearings - airframe rolling rigid, single row ball bearings in steel diameter series 0 and 2. Dimensions and loads
BS EN 20139:1992, ISO 139:1973. Textiles. Standard atmospheres for conditioning and testing
BS EN 2014:1989. Specification for bearings - airframe rolling rigid single row ball bearings in corrosion resisting steel diameter series 0 and 2. Dimensions and loads
BS EN 20140-10:1992, ISO 140-10:1991. Acoustics. Measurement of sound insulation in buildings and of building elementsLaboratory measurement of airborne sound insulation of small building elements
BS EN 20140-2:1993, BS 2750-2:1993,ISO 140-2:1991. Determination, verification and application of precision data
BS EN 20140-9:1994, BS 2750-9:1987,ISO 140-9:1985. Acoustics. Measurement of sound insulation in buildings and of building elementsLaboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it
BS EN 2015:1989. Specification for bearings - airframe rolling double row, self aligning ball bearings in steel diameter series 2. Dimensions and loads
BS EN 2017:1989. Specification for bearings - airframe rolling double row self aligning ball bearings in corrosion resisting steel diameter series 2. Dimensions and loads
BS EN 2018:1989. Specification for bearings - airframe rolling single row, self aligning roller bearings in steel diameter series 3 and 4. Dimensions and loads
BS EN 20187:1993, ISO 187:1990. Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
BS EN 20-2:1993. Wood preservatives. Determination of the protective effectiveness against Lyctus brunneus (Stephens)Application by impregnation (laboratory method)
BS EN 2020:1989. Specification for bearings - airframe rolling single row self aligning roller bearings in corrosion resisting steel diameter series 3 and 4. Dimensions and loads
BS EN 2022:1990. Specification for bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Light series. Dimensions and loads
BS EN 20225:1992, ISO 225:1983. Fasteners. Bolts, screws, studs and nuts. Symbols and designations of dimensions
BS EN 2023:1989. Specification for bearings - spherical plain in corrosion resisting steel with self-lubricating liner. Normal series. Dimensions and loads
BS EN 20273:1992, ISO 273:1979. Fasteners. Clearance holes for bolts and screws
BS EN 20284:1993, ISO 284:1982. Conveyor belts. Electrical conductivity. Specification and method of test
BS EN 20286-1:1993, ISO 286-1:1988. ISO system of limits and fitsISO system of limits and fits. Bases of tolerances, deviations and fits
BS EN 20286-2:1993, ISO 286-2:1988. ISO system of limits and fitsISO system of limits and fits. Tables of standard tolerance grades and limit deviations for holes and shafts
BS EN 20287:1994, ISO 287:1985. Paper and board. Determination of moisture content. Oven-drying method
BS EN 203-1:1993. Specification for gas heated catering equipmentSafety requirements
BS EN 203-1:2005+A1:2008. Gas heated catering equipmentGeneral safety rules
BS EN 203-2:1995. Specification for gas heated catering equipmentRational use of energy
BS EN 2032-1:2002. Metallic materialsConventional designation
BS EN 203-2-1:2005. Gas heated catering equipmentSpecific requirements. Open burners and wok burners
BS EN 203-2-10:2007. Gas heated catering equipmentSpecific requirements. Chargrills
BS EN 203-2-11:2006. Gas heated catering equipmentSpecific requirements
BS EN 2032-2:1994. Metallic materials.Coding of metallurgical condition in delivery condition
BS EN 203-2-2:2006. Gas heated catering equipmentSpecific requirements
BS EN 203-2-3:2005. Gas heated catering equipmentSpecific requirements. Boiling pans
BS EN 203-2-4:2005. Gas heated catering equipmentSpecific requirements. Fryers
BS EN 203-2-6:2005. Gas heated catering equipmentSpecific requirements. Hot water heaters for beverage
BS EN 203-2-7:2007. Gas heated catering equipmentSpecific requirements. Salamanders and rotisseries
BS EN 203-2-8:2005. Gas heated catering equipmentSpecific requirements. Brat pans and paella cookers
BS EN 203-2-9:2005. Gas heated catering equipmentSpecific requirements. Solid tops, warming plates and griddles
BS EN 203-3:2009. Gas heated catering equipmentMaterials and parts in contact with food and other sanitary aspects
BS EN 20340:1993, ISO 340:1988. Conveyor belts. Flame retardation. Specifications and test method
BS EN 20354:1993, ISO 354:1985. Acoustics. Measurement of sound absorption in a reverberation room
BS EN 204:1991. Classification of non-structural adhesives for joining of wood and derived timber products
BS EN 204:2001. Classification of thermoplastic wood adhesives for non-structural applications
BS EN 2043:2013. Aerospace series. Metallic materials. General requirements for semi-finished product qualification (excluding forgings and castings)
BS EN 2044:2001. Aerospace series. Round bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Diameter 4 mm ≤ D ≤ 63 mm. Dimensions
BS EN 2045:2001. Aerospace series. Square bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Thickness 6 mm ≤ a ≤ 50 mm. Dimensions
BS EN 2046:2001. Hexagonal bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Width across flats 7 mm ≤ a ≤ 50 mm. Dimensions
BS EN 2047:2001. Aerospace series. Beaded L-section extruded, in aluminium and aluminium alloys. Dimensions
BS EN 2048:2001. Aerospace series. Extruded L-section in aluminium alloys. Dimensions
BS EN 2049:2001. Aerospace series. Extruded channel section, in aluminium alloys. Dimensions
BS EN 205:1991. Test methods for wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints
BS EN 205:2003. Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints
BS EN 2050:2001. Aerospace series. Extruded T-section, in aluminium alloys. Dimensions
BS EN 20534:1993, ISO 534:1988. Method for determination of thickness and apparent bulk density or apparent sheet density of paper and board
BS EN 20535:1994, ISO 535:1991. Paper and board. Determination of water absorptiveness. Cobb method
BS EN 20544:1991, ISO 544:1989. Specification for sizes for filler metals for manual welding
BS EN 20594-1:1994, ISO 594-1:1986. Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipmentGeneral requirements
BS EN 206-1:2000. ConcreteSpecification, performance, production and conformity
BS EN 2063:1992. Airframe rolling bearings. Technical specification
BS EN 20638:1993, ISO 638-1978. Method for determination of dry-matter content of pulps
BS EN 2064:1992. Bearings, spherical plain in corrosion resisting steel with self lubricating liner. Technical specification
BS EN 2066:2002. Aerospace series. Extruded section in aluminium alloys. General tolerances
BS EN 2067:1996. Rod ends with self-aligning ball bearings. Technical specification
BS EN 2068:1996. Rod ends with self-lubricating self-aligning bearings. Technical specification
BS EN 206-9:2010. ConcreteAdditional rules for self-compacting concrete (SCC)
BS EN 20693:1992, ISO 693:1982. Dimensions of seam welding wheel blanks
BS EN 207:1994. Specification for filters and equipment used for personal eye-protection against laser radiation
BS EN 207:1999. Personal eye-protection. Filters and eye-protectors against laser radiation (laser eye-protectors)
BS EN 207:2009. Personal eye-protection equipment. Filters and eye-protectors against laser radiation (laser eye-protectors)
BS EN 2070-1:1991. Specification for aluminium and aluminium alloy wrought products. Technical specificationGeneral requirements
BS EN 2070-2:1991. Specification for aluminium and aluminium alloy wrought products. Technical specificationSheet, strip formed profiles and plate
BS EN 2070-3:1991. Specification for aluminium and aluminium alloy wrought products. Technical specificationBar and section
BS EN 2070-4:1991. Specification for aluminium and aluminium alloy wrought products. Technical specificationTube for structures
BS EN 2070-5:1991. Specification for aluminium and aluminium alloy wrought products. Technical specificationTube used under pressure
BS EN 2070-6:1991. Specification for aluminium and aluminium alloy wrought products. Technical specificationRivet wire
BS EN 2070-7:1991. Specification for aluminium and aluminium alloy wrought products. Technical specificationWrought forging stock
BS EN 2071:2002. Aerospace series. Sheets in aluminium and aluminium alloys. Thickness 0,25 mm ≤ a ≤ 6 mm. Dimensions
BS EN 2072:1994. Aluminium alloy AL-P1050A-H14. Sheet and strip 0,4 mm ≤ a ≤ 6 mm
BS EN 2072:2005. Aerospace series. Aluminium AL-P1050A. H14. Sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 2076-1:1991. Aluminium and magnesium alloy ingots and castings. Technical specificationGeneral requirements
BS EN 2076-2:1991. Aluminium and magnesium alloy ingots and castings. Technical specificationIngots for remelting
BS EN 2076-3:1991. Aluminium and magnesium alloy ingots and castings. Technical specificationPre-production and production castings
BS EN 2078:1993. Metallic materials. Manufacturing schedule. Inspection schedule. Inspection and test report. Description and rules for use
BS EN 2078:2002. Aerospace series. Metallic materials. Manufacturing schedule, inspection schedule, inspection and test report. Definition, general principles, preparation and approval
BS EN 20780:1993, ISO 780:1985. Packaging. Pictorial marking for handling of goods
BS EN 2079:1995. Bearings, precision ball with flange in corrosion resisting steel, for instruments and equipment. Dimensions and loads
BS EN 208:1994. Specification for personal eye-protectors used for adjustment work on lasers and laser systems
BS EN 208:1999. Personal eye-protection. Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
BS EN 208:2009. Personal eye-protection. Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
BS EN 20811:1992, ISO 811:1981. Textiles. Determination of resistance to water penetration. Hydrostatic pressure test
BS EN 2082-1:1991. Specification for aluminium alloy forging stock and forgings. Technical specificationGeneral requirements
BS EN 2082-2:1991. Specification for aluminium alloy forging stock and forgings. Technical specificationForging stock
BS EN 2082-3:1991. Specification for aluminium alloy forging stock and forgings. Technical specificationPre-production and production forgings
BS EN 2083:2001. Aerospace series. Copper and copper alloy conductors for electrical cables. Product standard
BS EN 2084:2005. Aerospace series. Cables, electric, single-core, general purpose, with conductors in copper or copper alloy. Technical specification
BS EN 2085:2004. Aerospace series. Aluminium alloy AL-P2618A-T6. Hand and die forgings. a ≤ 150 mm
BS EN 2086:2004. Aerospace series. Aluminium alloy AL-P2618A-T851. Hand and die forgings. a ≤ 150 mm
BS EN 20865:1992, ISO 865:1981. Slots in platens for projection welding machines
BS EN 2087:2005. Aerospace series. Aluminium alloy AL-P2014A. T6 or T62. Clad sheet & strip 0,4 mm ≤ a ≤ 6 mm
BS EN 2088:2005. Aerospace series. Aluminium alloy AL-P2014A. T4 or T42. Clad sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 2089:1994. Aluminium alloy AL-P2014A-T6 or T62. Sheet and strip 0,4 mm ≤ a ≤ 6 mm
BS EN 2089:2005. Aluminium alloy AL-P2014A T6 or T62. Sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 20898-1:1992, ISO 898-1:1988. Mechanical properties of fastenersBolts, screws and studs
BS EN 20898-2:1992, ISO 898-2:1980. Mechanical properties of fasteners.Nuts with specified proof load values
BS EN 20898-2:1994, ISO 898-2:1992. Mechanical properties of fasteners.Nuts with specified proof load values. Coarse thread
BS EN 20898-6:1992, ISO 898-6:1988. Mechanical properties of fastenersNuts with specified proof load values. Fine pitch thread
BS EN 20898-7:1995, ISO 898-7:1992. Mechanical properties of fastenersTorsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
BS EN 209:2000. Steel drums. Removable head (open head) drums with a minimum total capacity of 210 l
BS EN 2090:2005. Aerospace series. Aluminium alloy AL-P2024-T3. Clad sheet and strip 0,3 mm ≤ a ≤ 6 mm
BS EN 2092:1994. Aluminium alloy AL-P7075-T6 or T62. Clad sheet and strip 0,4 mm ≤ a ≤ 6 mm
BS EN 2092:2005. Aerospace series. Aluminium alloy AL-P7075-T6 or T62. Clad sheet and strip. 0,4 mm ≤a ≤6 mm
BS EN 2093:1992. Aluminium alloy AL-P7009-T74. Hand forgings 20 mm ≤ a ≤ 150 mm
BS EN 2094:1992. Aluminium alloy AL-P7009-T74. Die forgings 3 mm ≤ a ≤ 150 mm
BS EN 210:2000. Steel drums. Non-removable head (tight head) drums with a minimum total capacity of 216,5 l
BS EN 2100:1992. Aluminium alloy AL-P2014A-T4511. Extruded bars and sections a or D ≤ 200 mm
BS EN 2101:1991. Specification for chromic acid anodizing of aluminium and wrought aluminium alloys
BS EN 2103-1:1992. Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification.General requirements
BS EN 2103-2:1991. Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specificationRemelting stock
BS EN 2103-3:1992. Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specificationPre-production and production castings
BS EN 2104:1996. Acrylonitrile-butadiene rubber (NBR). Hardness 40 IRHD
BS EN 21089:1992, ISO 1089:1980. Electrode taper fits for spot welding equipment. Dimensions
BS EN 2115:2009. Aerospace series. Aluminium alloy 2117-T42. Wire for solid rivets. D ≤ 10 mm
BS EN 2116:2009. Aerospace series. Aluminium alloy 2017A-T42. Wire for solid rivets. D ≤ 10 mm
BS EN 2117:2009. Aerospace series. Aluminium alloy AL-P5056A (5056A)-H32. Wire for solid rivets. D ≤ 10 mm
BS EN 212:2003. Wood preservatives. General guidance on sampling and preparation for analysis of wood preservatives and treated timber
BS EN 2122:1990. Specification for washers, flat aluminium alloy
BS EN 2122:1994. Washers, flat, in aluminium alloy, anodized or chromated
BS EN 2122:1996. Washers, flat, in aluminium alloy, anodized or chromated
BS EN 2126:1992. Aluminium alloy AL-P7075-T651. Plate 6 mm < a ≤ 80 mm
BS EN 2127:1992. Aluminium alloy AL-P7075-T73511. Extruded bars and sections a or D ≤ 100 mm
BS EN 2128:1992. Aluminium alloy AL-P7075-T7351. Drawn bars 6 mm ≤ a or D ≤ 75 mm
BS EN 2130:2001. Aerospace series. Bearings, precision ball in corrosion resisting steel for instruments and equipment. Technical specification
BS EN 2131:2002. Aerospace series. Plates in aluminium alloys. Thickness 6 mm < a ≤ 160 mm. Dimensions
BS EN 2133:1998. Cadmium plating of steels with specified tensile strength ≤ 1450 MPa, copper, copper alloys and nickel alloys
BS EN 2133:2010. Aerospace series. Cadmium plating of steels with specified tensile strength ≤ 1450 MPa, copper, copper alloys and nickel alloys
BS EN 2134:2002. Aerospace series. Round bars, extruded in aluminium and aluminium alloys. Diameter 10 mm ≤ D ≤ 220 mm. Dimensions
BS EN 2138:1990. Specification for washers, flat steel
BS EN 2138:1993. Washers, flat, in steel, cadmium plated
BS EN 2138:2000. Washers, flat, in steel, cadmium plated
BS EN 2139:1990. Specification for washers, flat heat resisting steel
BS EN 2143:1993. Rivets, solid, universal head, in aluminium 1050A, inch based series
BS EN 2144:1993. Rivets, solid, universal head, in aluminium alloy 2117, inch based series
BS EN 2145:1993. Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series
BS EN 2146:1993. Rivets, solid, universal head, in aluminium alloy 2017A, inch based series
BS EN 2148:1993. Rivets, solid, universal head, in aluminium alloy 5056A, inch based series
BS EN 2149:1993. Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series
BS EN 2149:1996. Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series
BS EN 215:2004. Thermostatic radiator valves. Requirements and test methods
BS EN 215-1:1991. Thermostatic radiator valvesRequirements and test methods
BS EN 21512:1994, BS 3900-A1:1992,ISO 1512:1991. Methods of test for paints. Sampling
BS EN 21539:1992, ISO/IEC 1539:1991. Information technology. Programming languages. FORTRAN
BS EN 2155-12:1997. Specification for test methods for transparent materials for aircraft glazingDetermination of linear thermal expansion
BS EN 2155-13:1993. Test methods for transparent materials for aircraft glazing.Determination of temperature at deflection under load
BS EN 2155-14:1993. Test methods for transparent materials for aircraft glazing.Determination of the 1/10 Vicat softening temperature
BS EN 2155-19:1997. Specification for test methods for transparent materials for aircraft glazingDetermination of craze resistance
BS EN 2155-2:1993. Specification for test methods for transparent materials for aircraft glazingDetermination of water absorption
BS EN 2155-21:1989. Specification for test methods for transparent materials for aircraft glazingDetermination of resistance to crack propagation (K factor)
BS EN 2155-3:1993. Specification for test methods for transparent materials for aircraft glazingDetermination of refractive index
BS EN 2155-5:1989. Specification for test methods for transparent materials for aircraft glazingDetermination of visible light transmission
BS EN 2155-7:1997. Specification for test methods for transparent materials for aircraft glazingDetermination of optical deviation
BS EN 2155-8:1989. Specification for test methods for transparent materials for aircraft glazingDetermination of optical distortion
BS EN 2155-9:1989. Specification for test methods for transparent materials for aircraft glazingDetermination of haze
BS EN 21559:1992, ISO 1559:1986. Specification for alloys for dental amalgam
BS EN 21561:1992, ISO 1561:1975. Specification for dental inlay casting wax
BS EN 21564:1991, ISO 1564:1976. Specification for dental agar impression material
BS EN 2157-1:1993. Steel. Forging stock and forgings. Technical specifications.General requirements
BS EN 2157-2:1993. Steel. Forging stock and forgings. Technical specifications.Forging stock
BS EN 2157-3:1993. Steel. Forging stock and forgings. Technical specifications.Pre-production and production forgings
BS EN 21683:1994, ISO 1683:1983. Acoustics. Preferred reference quantities for acoustic levels
BS EN 21746:1993, ISO 1746-1983. Rubber or plastics hoses and tubing. Bending tests
BS EN 21864:1991, ISO 1864:1985. Information processing. Unrecorded 12,7 mm (0.5 in) wide magnetic tape for information interchange. 32 ftpmm (800 ftpi) NRZ1, 126ftpmm (3 200 ftpi) phase encoded and 356 ftpmm (9 042 ftpi), NRZ1
BS EN 21864:1994, ISO/IEC 1864:1992. Information technology. Unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange. 32 ftpmm (800 ftpi) NRZ1, 126 ftpmm (3 200 ftpi) phase encoded and 356 ftpmm (9 042 ftpi) NRZ1
BS EN 21942-1:1992, ISO 1942-1:1989. Dental vocabulary.General and clinical terms
BS EN 21942-2:1993, ISO 1942-2:1989. Dental vocabulary.Dental materials
BS EN 21942-3:1994, ISO 1942-3:1989. Dental vocabulary.Dental instruments
BS EN 21942-4:1994, ISO 1942-4:1989. Dental vocabulary.Dental equipment
BS EN 21974:1994, ISO 1974:1990. Paper. Determination of tearing resistance (Elmendorf method)
BS EN 2205:2009. Aerospace series. Steel FE-PL1502 (25CrMo4). 900 MPa ≤ Rm ≤ 1100 MPa. Bars. De ≤ 40 mm
BS EN 2206:2008. Aerospace series. Steel FE-PL1502 (25CrMo4). 650 MPa ≤ Rm ≤ 850 MPa. Bars. De ≤ 150 mm
BS EN 22063:1994. Metallic and other inorganic coatings. Thermal spraying. Zinc, aluminium and their alloys
BS EN 2209:2008. Aerospace series. Steel FE-PL1502 (25CrMo4). 900 MPa ≤ Rm ≤ 1100 MPa. Sheets, strips and plates. 0,5 mm ≤ a ≤ 20 mm
BS EN 2213:2012. Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Bars. De ≤ 16 mm. 980 MPa ≤ Rm ≤ 1 180 MPa
BS EN 22206:1993, ISO 2206:1987. Complete, filled transport packages. Method for identifying parts when testing
BS EN 22233:1993, ISO 2233:1986. Complete, filled transport packages. Method of conditioning for testing
BS EN 22234:1993, ISO 2234:1985. Complete, filled transport packages. Methods of test for stacking using static load
BS EN 22244:1993, ISO 2244:1985. Complete, filled transport packages. Method for determination of resistance to horizontal impact
BS EN 22247:1993, ISO 2247:1985. Complete, filled transport packages. Method for determination of resistance to fixed low frequency vibration
BS EN 22248:1993, ISO 2248:1985. Complete, filled transport packages. Method for determination of resistance to vertical impact by dropping
BS EN 22286:1994, BS 3424- 1:1994,ISO 2286:1986. Methods for the determination of length and width of a roll, net mass and mean mass per unit area of a piece, cut, roll or sample and the determination of thickness for coated fabrics
BS EN 22313:1992, ISO 2313:1972. Textile fabrics. Determination of the recovery from creasing of a horizontally folded specimen by measuring the angle of recovery
BS EN 22338:1992, ISO 2338:1986. Parallel pins, unhardened
BS EN 22339:1992, ISO 2339:1986. Taper pins, unhardened
BS EN 2234:2012. Aerospace series. Cable, electrical, fire resistant. Technical specification
BS EN 22340:1992, ISO 2340:1986. Clevis pins without head
BS EN 22341:1992, ISO 2341:1986. Clevis pins with head
BS EN 2235:2006. Aerospace series. Single and multicore electrical cables, screened and jacketed
BS EN 2236:1992. Pins, headed, close tolerance shank, in alloy steel. Technical specification
BS EN 2240-001:2009. Aerospace series. Lamps, incandescentTechnical specification
BS EN 2240-002:2009. Aerospace series. Lamps, incandescentMain characteristics
BS EN 2240-003:2010. Aerospace series. Lamps, incandescentLamp, code 44. Product standard
BS EN 2240-004:2010. Aerospace series. Lamps, incandescentLamp, code 47. Product standard
BS EN 2240-005:2009. Aerospace series. Lamps, incandescentLamp, code 73. Product standard
BS EN 2240-006:2009. Aerospace series. Lamps, incandescentLamp, code 73E. Product standard
BS EN 2240-007:2009. Aerospace series. Lamps, incandescentLamp, code 74. Product standard
BS EN 2240-008:2009. Aerospace series. Lamps, incandescentLamp, code 75. Product standard
BS EN 2240-009:2009. Aerospace series. Lamps, incandescentLamp, code 83. Product standard
BS EN 2240-010:2010. Aerospace series. Lamps, incandescentLamp, code 84. Product standard
BS EN 2240-011:2010. Aerospace series. Lamps, incandescentLamp, code 85. Product standard
BS EN 2240-012:2010. Aerospace series. Lamps, incandescentLamp, code 95. Product standard
BS EN 2240-013:2010. Aerospace series. Lamps, incandescentLamp, code 301. Product standard
BS EN 2240-014:2010. Aerospace series. Lamps, incandescentLamp, code 303. Product standard
BS EN 2240-015:2010. Aerospace series. Lamps, incandescentLamp, code 304. Product standard
BS EN 2240-016:2010. Aerospace series. Lamps, incandescentLamp, code 305. Product standard
BS EN 2240-017:2010. Aerospace series. Lamps, incandescentLamp, code 306. Product standard
BS EN 2240-018:2010. Aerospace series. Lamps, incandescentLamp, code 307. Product standard
BS EN 2240-019:2010. Aerospace series. Lamps, incandescentLamp, code 308. Product standard
BS EN 2240-020:2010. Aerospace series. Lamps, incandescentLamp, code 311. Product standard
BS EN 2240-021:2010. Aerospace series. Lamps, incandescentLamp, code 313. Product standard
BS EN 2240-022:2010. Aerospace series. Lamps, incandescentLamp, code 315. Product standard
BS EN 2240-023:2010. Aerospace series. Lamps, incandescentLamp, code 316. Product standard
BS EN 2240-024:2010. Aerospace series. Lamps, incandescentLamp, code 327. Product standard
BS EN 2240-025:2010. Aerospace series. Lamps, incandescentLamp, code 328. Product standard
BS EN 2240-026:2010. Aerospace series. Lamps, incandescentLamp, code 330. Product standard
BS EN 2240-027:2010. Aerospace series. Lamps, incandescentLamp, code 334. Product standard
BS EN 2240-028:2010. Aerospace series. Lamps, incandescentLamp, code 337. Product standard
BS EN 2240-029:2010. Aerospace series. Lamps, incandescentLamp, code 338. Product standard
BS EN 2240-030:2010. Aerospace series. Lamps, incandescentLamp, code 345. Product standard
BS EN 2240-031:2010. Aerospace series. Lamps, incandescentLamp, code 356. Product standard
BS EN 2240-032:2010. Aerospace series. Lamps, incandescentLamp, code 376. Product standard
BS EN 2240-033:2010. Aerospace series. Lamps, incandescentLamp, code 377. Product standard
BS EN 2240-034:2010. Aerospace series. Lamps, incandescentLamp, code 382. Product standard
BS EN 2240-035:2010. Aerospace series. Lamps, incandescentLamp, code 387. Product standard
BS EN 2240-036:2010. Aerospace series. Lamps, incandescentLamp, code 388. Product standard
BS EN 2240-037:2010. Aerospace series. Lamps, incandescentLamp, code 394. Product standard
BS EN 2240-038:2010. Aerospace series. Lamps, incandescentLamp, code 401. Product standard
BS EN 2240-039:2010. Aerospace series. Lamps, incandescentLamp, code 600. Product standard
BS EN 2240-040:2010. Aerospace series. Lamps, incandescentLamp, code 680. Product standard
BS EN 2240-041:2010. Aerospace series. Lamps, incandescentLamp, code 682. Product standard
BS EN 2240-042:2010. Aerospace series. Lamps, incandescentLamp, code 683. Product standard
BS EN 2240-043:2010. Aerospace series. Lamps, incandescentLamp, code 685. Product standard
BS EN 2240-044:2010. Aerospace series. Lamps, incandescent Lamp, code 713. Product standard
BS EN 2240-045:2010. Aerospace series. Lamps, incandescentLamp, code 714. Product standard
BS EN 2240-046:2010. Aerospace series. Lamps, incandescentLamp, code 715. Product standard
BS EN 2240-047:2010. Aerospace series. Lamps, incandescentLamp, code 718. Product standard
BS EN 2240-048:2010. Aerospace series. Lamps, incandescentLamp, code 718 NPC. Product standard
BS EN 2240-049:2010. Aerospace series. Lamps, incandescentLamp, code 757. Product standard
BS EN 2240-050:2010. Aerospace series. Lamps, incandescentLamp, code 1064. Product standard
BS EN 2240-051:2011. Aerospace series. Lamps, incandescentLamp, code 1163. Product standard
BS EN 2240-052:2011. Aerospace series. Lamps, incandescentLamp, code 1222. Product standard
BS EN 2240-053:2011. Aerospace series. Lamps, incandescentLamp, code 1308. Product standard
BS EN 2240-054:2011. Aerospace series. Lamps, incandescentLamp, code 1317. Product standard
BS EN 2240-055:2011. Aerospace series. Lamps, incandescentLamp, code 1495. Product standard
BS EN 2240-056:2011. Aerospace series. Lamps, incandescentLamp, code 1506. Product standard
BS EN 2240-057:2011. Aerospace series. Lamps, incandescent Lamp, code 1512. Product standard
BS EN 2240-058:2011. Aerospace series. Lamps, incandescentLamp, code 1524. Product standard
BS EN 2240-059:2011. Aerospace series. Lamps, incandescentLamp, code 1591. Product standard
BS EN 2240-060:2011. Aerospace series. Lamps, incandescentLamp, code 1619. Product standard
BS EN 2240-061:2011. Aerospace series. Lamps, incandescentLamp, code 1683. Product standard
BS EN 2240-062:2011. Aerospace series. Lamps, incandescentLamp, code 1810. Product standard
BS EN 2240-063:2011. Aerospace series. Lamps, incandescentLamp, code 1815. Product standard
BS EN 2240-064:2011. Aerospace series. Lamps, incandescentLamp, code 1819. Product standard
BS EN 2240-065:2011. Aerospace series. Lamps, incandescentLamp, code 1820. Product standard
BS EN 2240-066:2011. Aerospace series. Lamps, incandescentLamp, code 1829. Product standard
BS EN 2240-067:2011. Aerospace series. Lamps, incandescentLamp, code 1843. Product standard
BS EN 2240-068:2011. Aerospace series. Lamps, incandescentLamp, code 1864. Product standard
BS EN 2240-069:2011. Aerospace series. Lamps, incandescentLamp, code 1978. Product standard
BS EN 2240-070:2011. Aerospace series. Lamps, incandescentLamp, code 2232. Product standard
BS EN 2240-071:2011. Aerospace series. Lamps, incandescentLamp, code 3011. Product standard
BS EN 2240-072:2011. Aerospace series. Lamps, incandescentLamp, code 3912. Product standard
BS EN 2240-073:2011. Aerospace series. Lamps, incandescentLamp, code 4174. Product standard
BS EN 2240-074:2011. Aerospace series. Lamps, incandescentLamp, code 5086. Product standard
BS EN 2240-075:2011. Aerospace series. Lamps, incandescentLamp, code 5448. Product standard
BS EN 2240-076:2011. Aerospace series. Lamps, incandescentLamp, code 5678. Product standard
BS EN 2240-077:2011. Aerospace series. Lamps, incandescentLamp, code 6832. Product standard
BS EN 2240-078:2011. Aerospace series. Lamps, incandescentLamp, code 6838. Product standard
BS EN 2240-079:2011. Aerospace series. Lamps, incandescentLamp, code 6839. Product standard
BS EN 2240-080:2011. Aerospace series. Lamps, incandescentLamp, code 7007-704. Product standard
BS EN 2240-081:2011. Aerospace series. Lamps, incandescentLamp, code 7070. Product standard
BS EN 2240-082:2011. Aerospace series. Lamps, incandescentLamp, code 7079. Product standard
BS EN 2240-083:2011. Aerospace series. Lamps, incandescentLamp, code 7152. Product standard
BS EN 2240-084:2011. Aerospace series. Lamps, incandescentLamp, code 7153. Product standard
BS EN 2240-085:2011. Aerospace series. Lamps, incandescentLamp, code 7265. Product standard
BS EN 2240-086:2011. Aerospace series. Lamps, incandescentLamp, code 7333. Product standard
BS EN 2240-087:2011. Aerospace series. Lamps, incandescentLamp, code 7341. Product standard
BS EN 2240-088:2011. Aerospace series. Lamps, incandescentLamp, code A7512-12. Product standard
BS EN 2240-089:2011. Aerospace series. Lamps, incandescentLamp, code A7512-24. Product standard
BS EN 2240-090:2011. Aerospace series. Lamps, incandescentLamp, code 7683. Product standard
BS EN 2240-091:2011. Aerospace series. Lamps, incandescentLamp, code 7714. Product standard
BS EN 2240-092:2011. Aerospace series. Lamps, incandescentLamp, code 7715. Product standard
BS EN 2240-093:2011. Aerospace series. Lamps, incandescentLamp, code 7839. Product standard
BS EN 2240-094:2011. Aerospace series. Lamps, incandescentLamp, code 8022. Product standard
BS EN 2240-095:2011. Aerospace series. Lamps, incandescentLamp, code 8552. Product standard
BS EN 2240-096:2011. Aerospace series. Lamps, incandescentLamp, code 72301-6. Product standard
BS EN 2240-097:2011. Aerospace series. Lamps, incandescentLamp, code 72601-12. Product standard
BS EN 2240-098:2011. Aerospace series. Lamps, incandescentLamp, code 416650. Product standard
BS EN 2240-099:2011. Aerospace series. Lamps, incandescentLamp, code 416700. Product standard
BS EN 22401:1994, ISO 2401:1972. Covered electrodes. Determination of the efficiency, metal recovery and deposition coefficient
BS EN 2240-100:2011. Aerospace series. Lamps, incandescentLamp, code 2078. Product standard
BS EN 2240-101:2011. Aerospace series. Lamps, incandescentLamp, code 404-02. Product standard
BS EN 2241:2010. Aerospace series. Lamp caps. Dimensions
BS EN 2242:2012. Aerospace series. Crimping of electric cables with conductors defined by EN 2083, EN 4434 and EN 2346
BS EN 2243-1:2005. Aerospace series. Non-metallic materials. Structural adhesives. Test methodSingle lap shear
BS EN 2243-2:1991. Structural adhesives. Test methodsPeel metal-metal
BS EN 2243-2:2005. Aerospace series. Non-metallic materials. Structural adhesives. Test methodPeel metal-metal
BS EN 2243-3:1992. Structural adhesives. Test methods.Peeling test metal-honeycomb core
BS EN 2243-3:2005. Aerospace series. Non-metallic materials. Structural adhesives. Test methodPeeling test metal-honeycomb core
BS EN 2243-4:1991. Structural adhesives. Test methodsMetal-honeycomb core flatwise tensile test
BS EN 2243-4:2005. Aerospace series. Non-metallic materials. Structural adhesives. Test methodMetal-honeycomb core flatwise tensile test
BS EN 2243-5:1992. Test methods for structural adhesives.Ageing tests
BS EN 2243-5:2005. Aerospace series. Non-metallic materials. Structural adhesives. Test methodAgeing tests
BS EN 2243-6:2005. Aerospace series. Non-metallic materials. Structural adhesives. Test methodDetermination of shear stress and shear strain
BS EN 2245:2012. Aerospace series. Pipelines for liquids and gases. Definitions
BS EN 225-1:2007. Atomizing oil burners. Oil burner pumps and oil burner motors. Connecting dimensionsOil burner pumps
BS EN 225-2:2007. Atomizing oil burners. Oil burner pumps and oil burner motors. Connecting dimensionsOil burner motors
BS EN 2252:2012. Aerospace series. Steel FE-PL1505 (15CrMoV6). 1 080 MPa ≤ Rm ≤ 1 250 MPa. Forgings. De ≤ 100 mm
BS EN 22553:1995. Welded, brazed and soldered joints. Symbolic representation on drawings
BS EN 2256:2004. Aerospace series. Aluminium alloy AL-P2618A-T852. Hand and die forgings. a ≤ 150 mm
BS EN 2259:1995
BS EN 2259:1995. Silicone rubber (VMQ). Hardness 50 IRHD
BS EN 22592:1994, BS 2000-403:1994,ISO 2592:1973
BS EN 22592:1994, BS 2000-403:1994,ISO 2592:1973. Methods of test for petroleum and its products. Petroleum products. Determination of flash and fire points. Cleveland open cup method
BS EN 2260:1995
BS EN 2260:1995. Silicone rubber (VMQ). Hardness 60 IRHD
BS EN 2261:1995
BS EN 2261:1995. Silicone rubber (VMQ). Hardness 70 IRHD
BS EN 2262:1995
BS EN 2262:1995. Silicone rubber (VMQ/PVMQ) with high tear strength. Hardness 50 IRHD
BS EN 2264:1996
BS EN 2266-002:2005. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 200°CGeneral
BS EN 2266-003:2005. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 200°CInk jet printable. Product standard
BS EN 2266-005:2005. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 200°CUV laser printable. Product standard
BS EN 2266-007:2005. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 200°CUV laser printable multicore jacketed cable. Product standard
BS EN 2267-002:2005. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°CGeneral
BS EN 2267-002:2012. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°CGeneral
BS EN 2267-003:2005. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°CInkjet printable. Product standard
BS EN 2267-005:2006. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°CUV laser printable. Product standard
BS EN 2267-007:2005. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°CDMA family, single ink-jet printable and multicore assembly. Product standard
BS EN 2267-008:2005. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°CDM family, single UV laser printable and multicore assembly. Product standard
BS EN 2267-009:2005. Aerospace series. Cables, electrical for general purpose. Operating temperatures between -55°C and 260°CDRA family, single and multicore assembly. Product standard
BS EN 2267-009:2013. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°CDRA family, single and multicore assembly. Product standard
BS EN 2267-010:2005. Aerospace series. Cables, electrical for general purpose. Operating temperatures between -55°C and 260°CDR family, single UV laser printable. Product standard
BS EN 22719:1994, BS 2000-404:1994,ISO 2719:1988. Methods of test for petroleum and its products. Petroleum products and lubricants. Determination of flash point. Pensky-Martens closed cup method
BS EN 22768-1:1993, ISO 2768-1:1989. General tolerancesTolerances for linear and angular dimensions without individual tolerance indications
BS EN 22768-2:1993, ISO 2768-2:1989. General tolerances.Geometrical tolerances for features without individual tolerance indications
BS EN 228:1993. Specification for unleaded petrol (gasoline) for motor vehicles
BS EN 228:1995. Specification for unleaded petrol (gasoline) for motor vehicles
BS EN 228:1999. Automotive fuels. Unleaded petrol. Requirements and test methods
BS EN 228:2000. Automotive fuels. Unleaded petrol. Requirements and test methods
BS EN 228:2004. Automotive fuels. Unleaded petrol. Requirements and test methods
BS EN 228:2008. Automotive fuels. Unleaded petrol. Requirements and test methods
BS EN 228:2012. Automotive fuels. Unleaded petrol. Requirements and test methods
BS EN 2282:1992. Characteristics of aircraft electrical supplies
BS EN 2283:1996. Testing of aircraft wiring
BS EN 2283:2010. Aerospace series. Testing of aircraft wiring
BS EN 2284:1991. Specification for sulfuric acid anodizing of aluminium and wrought aluminium alloys
BS EN 2285:1990. Specification for bushes plain, aluminium alloy with self-lubricating liner. Dimensions and loads
BS EN 2286:1990. Specification for bushes flanged, aluminium alloy with self-lubricating liner. Dimensions and loads
BS EN 2287:1990. Specification for bushes plain, corrosion resisting steel with self-lubricating liner. Dimensions and loads
BS EN 22872:1993, ISO 2872:1985. Complete, filled transport packages. Method for determination of resistance to compression
BS EN 22873:1992, ISO 2873-1985. Complete, filled transport packages. Method for determination of resistance to low pressure
BS EN 22874:1993, ISO 2874:1985. Complete, filled transport packages. Method of test for stacking using compression tester
BS EN 22875:1993, ISO 2875:1985. Complete, filled transport packages. Method for determination of resistance to water spray
BS EN 22876:1993, ISO 2876:1985. Complete, filled transport packages. Method for determination of resistance to damage by rolling
BS EN 2288:1990. Specification for bushes flanged, corrosion resisting steel with self-lubricating liner. Dimensions and loads
BS EN 2289:1996. Rod bodies in aluminium alloy for flight controls. Technical specification
BS EN 2290-1:1998. Rod bodies, flight control in aluminium alloy, for adjustable end fittingsDimensions and loads
BS EN 22922:1993, ISO 2922:1975. Acoustics. Measurement of noise emitted by vessels on inland water-ways and harbours
BS EN 230:1991. Specification for monobloc oil burners. Safety, control and regulation devices and safety times
BS EN 230:2005. Automatic burner control systems for oil burners
BS EN 23015:1994, BS 2000-219:1994,ISO 3015:1992. Petroleum products. Determination of cloud point
BS EN 23035:1994, ISO 3035:1982. Single-faced and single-wall corrugated fibreboard. Determination of flat crush resistance
BS EN 2309:1990. Specification for hole sizes for solid rivets
BS EN 2310:1991. Test methods for the flame resistance rating of non-metallic materials
BS EN 2311:1990. Specification for bushes with self-lubricating liner. Technical specification
BS EN 2311:2012. Aerospace series. Bushes with self-lubricating liner. Technical specification
BS EN 23134-1:1991, ISO 3134-1:1985. Light metals and their alloys. Terms and definitionsMaterials
BS EN 23134-2:1991, ISO 3134-2:1985. Light metals and their alloys. Terms and definitionsUnwrought products
BS EN 23134-3:1991. Light metals and their alloys. Terms and definitionsWrought products
BS EN 23134-4:1991, ISO 3134-4:1985. Light metals and their alloys. Terms and definitionsCastings
BS EN 23166:1994, ISO 3166:1993. Codes for the representation of names of countries
BS EN 2318:1992. Aluminium alloy AL-P2024-T3511. Extruded bars and sections 1,2 mm ≤ a or D ≤ 150 mm
BS EN 232:1992. Baths. Connecting dimensions
BS EN 232:2003. Baths. Connecting dimensions
BS EN 232:2012. Baths. Connecting dimensions
BS EN 2326:1992. Aluminium alloy AL-P6082-T6. Extruded bars and sections a or D ≤ 200 mm
BS EN 2327:1989. Specification for washers, lock with radial serrations in alloy steel. Dimensions
BS EN 2327:2006. Aerospace series. Washers, lock, with radial serrations in alloy steel, cadmium plated for flight control rods. Dimensions
BS EN 23270:1991, ISO 3270:1984. Specification for temperatures and humidities for conditioning and testing paints, varnishes and their raw materials
BS EN 2328:1990. Specification for washers, tab for flight control rods. Dimensions
BS EN 2328:2006. Aerospace series. Washers, tab in corrosion resisting steel, cadmium plated for flight control rods. Dimensions
BS EN 2329:1993. Textile glass fibre preimpregnates. Test method for the determination of mass per unit area
BS EN 233:1997. Wallcoverings in roll form. Specification for finished wallpapers, wall vinyls and plastics wallcoverings
BS EN 233:1999. Wallcoverings in roll form. Specification for finished wallpapers, wall vinyls and plastics wallcoverings
BS EN 2330:1993. Textile glass fibre preimpregnates. Test method for the determination of the content of volatile matter
BS EN 2331:1993. Textile glass fibre preimpregnates. Test method for the determination of the resin and fibre content and mass of fibre per unit area
BS EN 23312:1993, ISO 3312:1987. Sintered metal materials and hardmetals. Determination of Young modulus
BS EN 2332:1993. Textile glass fibre preimpregnates. Test method for the determination of the resin flow
BS EN 23326:1993, ISO 3326:1993. Specification for hardmetals. Determination of (the magnetization) coercivity
BS EN 23327:1993, ISO 3327:1982. Hardmetals. Determination of transverse rupture strength
BS EN 2334:1997. Chromic-sulphuric acid pickle of aluminium and aluminium alloys
BS EN 2335:1990. Specification for bearings-spherical plain in corrosion resisting steel without assembly slot. Dimensions and loads
BS EN 2335:2005. Aerospace series. Bearings, spherical plain in corrosion resisting steel without assembly slot. Dimensions and loads
BS EN 2336:1990. Specification for bearings-spherical plain in steel with assembly slots. Dimensions and loads
BS EN 2336:2005. Aerospace series. Bearings, spherical plain in steel with assembly slots. Dimensions and loads
BS EN 23369:1993, ISO 3369:1975. Impermeable sintered metal materials and hardmetals. Determination of density
BS EN 2337:1996. Spherical plain bearings. Technical specification
BS EN 2337:2006. Aerospace series. Spherical plain bearings. Technical specification
BS EN 2338:2001. Aerospace series. Sheets, hot rolled in titanium and titanium alloys. Thickness 0,8 mm ≤ a ≤ 6 mm. Dimensions
BS EN 2339:2001. Aerospace series. Sheets, cold rolled in titanium and titanium alloys. Thickness 0,2 mm ≤ a ≤ 6 mm. Dimensions
BS EN 234:1997. Wallcoverings in roll form. Specification for wallcoverings for subsequent decoration
BS EN 2344:2001. Aerospace series. Round bars, machined in heat resisting alloys. Diameter 10 mm < D < 180 mm. Dimensions
BS EN 2346-002:2006. Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65°C and 260°CGeneral
BS EN 2346-003:2006. Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65°C and 260°CDL family, single core. Product standard
BS EN 2346-004:2006. Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65°C and 260°CDN family, single UV laser printable and multicore assembly. Light weight. Product standard
BS EN 2348:1989. Specification for control cable assemblies. Technical specification
BS EN 2349-201:2006. Aerospace series. Requirements and test procedures for relays and contactorsVisual inspection
BS EN 2349-202:2006. Aerospace series. Requirements and test procedures for relays and contactorsExamination of dimensions and mass
BS EN 2349-301:2006. Aerospace series. Requirements and test procedures for relays and contactorsPick up and drop out voltage
BS EN 2349-302:2006. Aerospace series. Requirements and test procedures for relays and contactorsInsulation resistance
BS EN 2349-303:2006. Aerospace series. Requirements and test procedures for relays and contactorsDielectric strength
BS EN 2349-304:2006. Aerospace series. Requirements and test procedures for relays and contactorsOperate and release time
BS EN 2349-305:2006. Aerospace series. Requirements and test procedures for relays and contactorsBounce time
BS EN 2349-306:2006. Aerospace series. Requirements and test procedures for relays and contactorsOverload d.c and a.c.
BS EN 2349-307:2006. Aerospace series. Requirements and test procedures for relays and contactorsContact voltage drop
BS EN 2349-308:2006. Aerospace series. Requirements and test procedures for relays and contactorsCoil current
BS EN 2349-309:2006. Aerospace series. Requirements and test procedures for relays and contactorsExported spikes
BS EN 2349-310:2006. Aerospace series. Requirements and test procedures for relays and contactorsRupture
BS EN 2349-312:2006. Aerospace series. Requirements and test procedures for relays and contactorsElectrical service life. Mixed load
BS EN 2349-316:2006. Aerospace series. Requirements and test procedures for relays and contactorsMechanical life (endurance at reduced load)
BS EN 2349-317:2006. Aerospace series. Requirements and test procedures for relays and contactorsService life of coil switching device
BS EN 2349-318:2006. Aerospace series. Requirements and test procedures for relays and contactorsPick-up voltage at high temperature and drop-out voltage at low temperature
BS EN 2349-319:2006. Aerospace series. Requirements and test procedures for relays and contactorsMiss test
BS EN 2349-402:2006. Aerospace series. Requirements and test procedures for relays and contactorsCorrosion, salt spray
BS EN 2349-405:2006. Aerospace series. Requirements and test procedures for relays and contactorsFluid resistance
BS EN 2349-407:2006. Aerospace Series. Requirements and test procedures for relays and contactorsCold/low pressure and moist heat
BS EN 2349-409:2007. Aerospace series. Requirements and test procedures for relays and contactorsOzone resistance
BS EN 2349-410:2007. Aerospace series. Requirements and test procedures for relays and contactorsMould
BS EN 2349-411:2007. Aerospace series. Requirements and test procedures for relays and contactorsTemperature change
BS EN 2349-412:2007. Aerospace series. Requirements and test procedures for relays and contactorsSeal
BS EN 2349-413:2007. Aerospace series. Requirements and test procedures for relays and contactorsVibration, sinusoidal and random
BS EN 2349-414:2007. Aerospace series. Requirements and test procedures for relays and contactorsMechanical shock
BS EN 2349-415:2007. Aerospace series. Requirements and test procedures for relays and contactorsAcceleration
BS EN 2349-601:2007. Aerospace series. Requirements and test procedures for relays and contactorsCompass safety distance
BS EN 235:2002. Wallcoverings. Vocabulary and symbols
BS EN 2350:1991. Circuit breakers. Technical specification
BS EN 2353:1989. Specification for turnbarrels, control cable in corrosion resisting steel. Dimensions and loads
BS EN 2354:1989. Specification for eye-ends, threaded, control cable in corrosion resisting steel. Dimensions and loads
BS EN 2355:1989. Specification for fork-ends, threaded, control cable in corrosion resisting steel. Dimensions and loads
BS EN 2356:1989. Specification for fork-ends threaded, control cable for rolling bearings in corrosion resisting steel. Dimensions and loads
BS EN 2357:1989. Specification for stud-ends in corrosion resisting steel swaged on type, control cable. Dimensions and loads
BS EN 2358:1989. Specification for eye-ends in corrosion resisting steel swaged on type, control cable. Dimensions and loads
BS EN 2359:1989. Specification for fork-ends in corrosion resisting steel swaged on type, control cable. Dimensions and loads
BS EN 2360:1989. Specification for fork-ends for rolling bearings in corrosion resisting steel swaged on type, control cable. Dimensions and loads
BS EN 2361:1989. Specification for ball-ends, double shank in corrosion resisting steel swaged on type, control cable. Dimensions and loads
BS EN 2362:1989. Specification for ball-ends in corrosion resisting steel swaged on type, control cable. Dimensions and loads
BS EN 2363:1989. Specification for locking clips for turnbuckles of control cables. Dimensions
BS EN 23630-2:1992, ISO 3630-2:1986. Dental root canal instrumentsSpecification for enlargers
BS EN 2364:1989. Specification for pins, shear headed, close tolerance
BS EN 2365:1989. Specification for collars, aluminium alloy
BS EN 2367:1990. Specification for split pins in steel EN 2573
BS EN 237:1996, BS 2000-428:1996. Methods of test for petroleum and its products. Liquid petroleum products. Petrol. Determination of low lead concentrations by atomic absorption spectrometry
BS EN 237:2004, BS 2000-428:2004. Methods of test for petroleum and its productsBS 2000-428: Liquid petroleum products. Petrol. Determination of low lead concentrations by atomic absorption spectrometry
BS EN 2374:1991. Specification for glass fibre reinforcing mouldings and sandwich composites. Production of test panels
BS EN 2375:1992. Resin preimpregnated materials. Production batch sampling procedure
BS EN 23758:1994, ISO 3758:1991. Textiles. Care labelling code using symbols
BS EN 2377:1989. Specification for glass fibre reinforced plastics. Test method. Determination of apparent interlaminar shear strength
BS EN 2378:1994. Fibre reinforced plastics. Determination of water absorption by immersion
BS EN 238:1996, BS 2000-429:1996. Methods of test for petroleum and its products. Liquid petroleum products. Petrol. Determination of the benzene content by infrared spectrometry
BS EN 2381:1992. Aluminium alloy AL-P7009-T7452. Hand forgings 40 mm ≤ a ≤ 150 mm
BS EN 2384:1992. Aluminium alloy AL-P2014A-T6511. Extruded bars and sections a or D ≤ 150 mm
BS EN 2385:1992. Aluminium alloy AL-P7009-T74511. Extruded bars and sections a or D ≤ 125 mm
BS EN 23878:1993, ISO 3878:1983. Hardmetals. Vickers hardness test
BS EN 23907:1993, ISO 3907:1985. Hardmetals. Determination of total carbon content. Gravimetric method
BS EN 23908:1993, ISO 3908:1985. Hardmetals. Determination of insoluble (free) carbon content. Gravimetric method
BS EN 23909:1994, ISO 3909:1976. Hardmetals. Determination of cobalt. Potentiometric method
BS EN 23923-1:1993, ISO 3923-1:1979. Metallic powders. Determination of apparent density.Funnel method
BS EN 23923-2:1993, ISO 3923-2:1981. Metallic powders. Determination of apparent densityScott volumeter method
BS EN 23927:1993, ISO 3927:1985. Specification for metallic powders, excluding powders for hardmetals. Determination of compactibility (compressibility) in uniaxial compression
BS EN 2395:1994. Aluminium alloy AL-P2014A-T4 or T42. Sheet and strip 0,4 mm ≤ a ≤ 6 mm
BS EN 2395:2005. Aerospace series. Aluminium alloy AL-P2014A-T4 or T42. Sheet and strip. 0,4 mm ≤a ≤6 mm
BS EN 23953:1993, ISO 3953:1985. Metallic powders. Determination of tap density
BS EN 23954:1993, ISO 3954:1977. Powders for powder metallurgical purposes. Sampling
BS EN 2398:2008. Aerospace series. Heat resisting steel FE-PA2601(X6NiCrTiMoV26-15). Rm ≥ 900 MPa. Bars for machined bolts. D ≤ 25 mm
BS EN 2399:2008. Aerospace series. Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15). Rm ≥ 900 MPa. Bars for forged bolts. D ≤ 25 mm
BS EN 23994:1993, ISO 3994:1977. Plastics products. Hose of polymer reinforced thermoplastics for suction and discharge
BS EN 23995:1993, ISO 3995:1985. Specification for metallic powders. Determination of green strength by transverse rupture of rectangular compacts
BS EN 24003:1993, ISO 4003:1977. Permeable sintered metal materials. Determination of bubble test pore size
BS EN 24006:1993, ISO 4006:1991. Measurement of fluid flow in closed conduits. Vocabulary and symbols
BS EN 24014:1992, ISO 4014:1988. Hexagon head bolts. Product grades A and B
BS EN 24015:1992, ISO 4015:1979. Hexagon head bolts. Product grade B. Reduced shank (shank diameter pitch diameter)
BS EN 24016:1992, ISO 4016:1988. Hexagon head bolts. Product grade C
BS EN 24017:1992, ISO 4017:1988. Hexagon head screws. Product grades A and B
BS EN 24018:1992, ISO 4018:1988. Hexagon head screws. Product grade C
BS EN 24032:1992, ISO 4032:1986. Hexagon nuts, style 1. Product grades A and B
BS EN 24033:1992, ISO 4033:1979. Hexagon nuts, style 2. Product grades A and B
BS EN 24034:1992, ISO 4034:1986. Hexagon nuts. Product grade C
BS EN 24035:1992, ISO 4035:1986. Hexagon thin nuts (chamfered). Product grades A and B
BS EN 24036:1992, ISO 4036:1979. Hexagon thin nuts. Product grade B (unchamfered)
BS EN 24049:1992, ISO 4049:1988. Specification for resin-based dental filling materials (class B)
BS EN 24063:1992, ISO 4063:1990. Welding, brazing, soldering and braze welding of metals. Nomenclature of processes and reference numbers for symbolic representation on drawings
BS EN 241:2000, BS 2000-464:2001. Methods of test for petroleum and its products. Liquid petroleum products. Determination of sodium content. Atomic absorption spectrometric method
BS EN 2413:1995. Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C
BS EN 24165:1992, ISO 4165:1979. Road vehicles. Electrical connections. Double-pole connector
BS EN 24178:1993, ISO 4178:1980. Specification for information to be recorded in distribution trials involving complete, filled transport packages
BS EN 24180-1:1993, ISO 4180-1:1980. Guide to compilation of performance test schedules for complete, filled transport packagesGeneral principles
BS EN 24180-2:1993, ISO 4180-2:1980. Guide to compilation of performance test schedules for complete, filled transport packagesQuantitative data
BS EN 24185:1993, ISO 4185-1980. Measurement of fluid flow in closed conduits. Weighing method
BS EN 24217:1994, ISO 4217:1990. Codes for the representation of currencies and funds
BS EN 2422:2005. Aluminium alloy AL-P2124-T351. Plate. 25 mm < a ≤ 120 mm
BS EN 2424:1995. Marking of aerospace products
BS EN 2424:2008. Aerospace series. Marking of aerospace products
BS EN 24260:1994, BS 2000-243:1994,ISO 4260:1987. Methods of test for petroleum and its products. Petroleum products and hydrocarbons. Determination of sulfur content. Wickbold combustion method
BS EN 2428:1995. Ethylene-propylene rubber (EPM/EPDM). Hardness 50 IRHD
BS EN 2429:1995. Ethylene-propylene rubber (EPM/EPDM). Hardness 60 IRHD
BS EN 2430:1995. Ethylene-propylene rubber (EPM/EPDM). Hardness 70 IRHD
BS EN 2431:1995. Ethylene-propylene rubber (EPM/EPDM). Hardness 80 IRHD
BS EN 2432:1995. Ethylene-propylene rubber (EPM/EPDM). Hardness 90 IRHD
BS EN 2434-001:2010. Aerospace series. Paints and varnishes. Two component cold curing polyurethane finishBasic requirements
BS EN 2434-002:2010. Aerospace series. Paints and varnishes. Two component cold curing polyurethane finishHigh chemical resistance
BS EN 2434-003:2010. Aerospace series. Paints and varnishes. Two component cold curing polyurethane finishFlexible and high fluid resistance for interior
BS EN 2434-004:2010. Aerospace series. Paints and varnishes. Two component cold curing polyurethane finishHigh flexibility
BS EN 2435-001:2006. Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primerMinimum requirements
BS EN 2435-002:2006. Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primerHigh corrosion resistance
BS EN 2435-003:2006. Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primerHigh corrosion and fluid resistance
BS EN 2435-004:2006. Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primerHigh corrosion and fluid resistance with surface preparation tolerance
BS EN 2435-005:2006. Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primerHigh corrosion resistance for military application
BS EN 2436-001:2006. Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primerBasic requirements
BS EN 2436-002:2006. Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primerHigh corrosion resistance
BS EN 2436-003:2006. Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primerHigh corrosion and fluid resistance
BS EN 2436-004:2006. Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primerHigh corrosion and fluid resistance with surface preparation tolerance
BS EN 2436-005:2006. Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primerFor exterior use with surface preparation tolerance
BS EN 2436-006:2006. Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing epoxy primerHigh corrosion resistance for military application
BS EN 2437:2002. Aerospace series. Chromate conversion coatings (yellow) for aluminium and aluminium alloys
BS EN 2438:2008. Aerospace series. Steel FE-PL2102 (35NiCr6). 900 MPa ≤ Rm ≤ 1100 MPa. Bars. De ≤ 40 mm
BS EN 2439:2009. Aerospace series. Steel FE-PL2102 (34NiCr6). 900 MPa ≤ Rm ≤ 1100 MPa. Forgings. De ≤ 40 mm
BS EN 2446:2008. Aerospace series. Steel FE-PL1503 (35CrMo4). 1100 MPa ≤ Rm ≤ 1300 MPa. Bars. De ≤ 25 mm
BS EN 2448:2008. Aerospace series. Steel FE-PL1503 (35CrMo4). 900 MPa ≤ Rm ≤ 1100 MPa. Bars. De ≤ 40 mm
BS EN 24489:1993, ISO 4489:1978. Sintered hardmetals. Sampling and testing
BS EN 24491-1:1993, ISO 4491-1:1989. Metallic powders. Determination of oxygen content by reduction methods.General guidelines
BS EN 24491-2:1993, ISO 4491-2:1989. Metallic powders. Determination of oxygen content by reduction methodsLoss of mass on hydrogen reduction (hydrogen loss)
BS EN 24491-4:1993, ISO 4491-4:1989. Metallic powders. Determination of oxygen content by reduction methods.Total oxygen by reduction-extraction
BS EN 24492:1993, ISO 4492:1985. Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
BS EN 24496:1993, ISO 4496:1978. Metallic powders. Determination of acid insoluble content in iron, copper, tin and bronze powders
BS EN 24497:1993, ISO 4497:1983. Metallic powders. Determination of particle size by dry sieving
BS EN 24498-1:1993, ISO 4498-1:1990. Sintered metal materials, exluding hardmetals. Determination of apparent hardness.Materials of essentially uniform section hardness
BS EN 24499:1993, ISO 4499:1978. Specification for hardmetals. Metallographic determination of microstructure
BS EN 24501:1994, ISO 4501:1978. Hardmetals. Determination of titanium. Photometric peroxide method
BS EN 24503:1993, ISO 4503:1978. Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Fusion method
BS EN 24505:1993, ISO 4505:1978. Specification for hardmetals. Metallographic determination of porosity and uncombined carbon
BS EN 24506:1993, ISO 4506:1979. Specification for hardmetals. Compression test
BS EN 246:1992. Sanitary tapware. General specifications for flow rate regulators
BS EN 246:2003. Sanitary tapware. General specifications for flow rate regulators
BS EN 2460:2009. Aerospace series. Steel FE-PM1901 (X12CrNi13). 600 MPa ≤ Rm ≤ 800 MPa. Bars. De ≤ 70 mm
BS EN 2461:2009. Aerospace series. Steel FE-PM1901 (X12CrNi13). 600 MPa ≤ Rm ≤ 800 MPa. Forgings. De ≤ 70 mm
BS EN 24624:1993, ISO 4624:1978. Paints and varnishes. Pull-off test
BS EN 24641:1993, ISO 4641:1991. Rubber hoses for water suction and discharge. Specification
BS EN 2465:2007. Aerospace series. Steel FE-PA3901 (X2CrNi18-9). Softened. 450 MPa ≤ Rm ≤ 680 MPa. Bar for machining. 4 mm ≤ De ≤ 100 mm
BS EN 2466:2009. Aerospace series. Steel FE-PA3901 (X2CrNi19-11). Softened. Forgings. De ≤ 100 mm
BS EN 2467:2007. Aerospace series. Steel FE-PA3901 (X2CrNi18-9). Air melted. Softened. Plate, sheet and strip. 0,4 mm ≤ a ≤ 20 mm. 520 MPa ≤ Rm ≤ 670 MPa
BS EN 24671:1993, ISO 4671-1984. Rubber and plastics hose and hose assemblies. Methods of measurement of dimensions
BS EN 24672:1993, ISO 4672:1988. Rubber and plastics hoses. Sub-ambient temperature flexibility tests
BS EN 2469:2007. Aerospace series. Steel FE-PA3901 (X1CrNi18-10). Air melted. Softened. Wires. 0,4 mm ≤ D ≤ 12,5 mm. 450 MPa ≤ Rm ≤ 650 MPa
BS EN 247:1997. Heat exchangers. Terminology
BS EN 24766:1992, ISO 4766:1983. Slotted set screws with flat point
BS EN 2478:2008. Aerospace series. Steel FE-PL2107 (30NiCrMo16). 1220 MPa ≤ Rm ≤ 1370 MPa. Bars. De ≤ 40 mm
BS EN 248:1992. Sanitary taps: general technical specifications for electrodeposited nickel chrome coatings
BS EN 248:2002. Sanitary tapware. General specification for electrodeposited coatings of Ni-Cr
BS EN 2480:2008. Aerospace series. Steel FE-PL2108 (36NiCrMo16). 1250 MPa ≤ Rm ≤ 1400 MPa. Bars. De ≤ 75 mm
BS EN 2481:2010. Aerospace series. Steel FE-PL2108 (36NiCrMo16). 1250 MPa ≤ Rm ≤ 1400 MPa. Forgings. De ≤ 75 mm
BS EN 2482:2010. Aerospace series. Steel FE-PL2108 (36NiCrMo16). 1100 MPa ≤ Rm ≤ 1300 MPa. Bars. De ≤ 100 mm
BS EN 24823:1994, ISO 4823:1992. Dental elastic impression material. Specification for elastomeric impression materials
BS EN 2483:2010. Aerospace series. Steel FE-PL2108 (36NiCrMo16). 1100 MPa ≤ Rm ≤ 1300 MPa. Forgings. De ≤ 100 mm
BS EN 2484:1989. Specification for microfilming of drawings. Aperture card for 35 mm microfilm
BS EN 2486:2005. Aerospace series. Aluminium alloy AL-P2618A. Forging stock
BS EN 24869-1:1993, ISO 4869-1:1990. Acoustics. Hearing protectorsSound attenuation of hearing protectors. Subjective method of measurement
BS EN 24869-3:1994, ISO/TR 4869-3:1989. Acoustics. Hearing protectorsSimplified method for the measurement of insertion loss of ear-muff type protectors for quality inspection purposes
BS EN 24883:1993, ISO 4883:1978. Specification for hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Solution method
BS EN 24884:1993, ISO 4884:1978. Hardmetals. Sampling and testing of powders using sintered test pieces
BS EN 2489:1995. Fibre reinforced plastics. Determination of the action of test fluids
BS EN 249:2010. Sanitary appliances. Shower trays made from crosslinked cast acrylic sheets. Requirements and test methods
BS EN 2491:1997. Molybdenum disulphide dry lubricants. Coating methods
BS EN 2491:2011. Aerospace series. Molybdenum disulphide dry lubricants. Coating methods
BS EN 24920:1992, ISO 4920:1981. Textiles. Determination of resistance to surface wetting (spray test) of fabrics
BS EN 24937:1991, ISO 4937:1986. Steel and iron. Determination of chromium content. Potentiometric or visual titration method
BS EN 2495:1991. Specification for single-pole circuit breakers, temperature compensated, rated currents up to 25 A. Product standard
BS EN 2497:1990. Specification for dry abrasive blasting of titanium and titanium alloys
BS EN 2498:1990. Specification for rod ends, adjustable self-aligning plain bearing, with self-lubricating liner and threaded shank. Dimensions and loads
BS EN 2499:1990. Specification for computer output microfiche (com) A6 microfiche
BS EN 250:1993. Respiratory equipment. Open-circuit self-contained compressed air diving apparatus. Requirements, testing, marking
BS EN 250:2000. Respiratory equipment. Open-circuit self-contained compressed air diving apparatus. Requirements, testing, marking
BS EN 2501:1992. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring. Dimensions and loads
BS EN 25077:1994, ISO 5077:1984. Textiles. Determination of dimensional change in washing and drying
BS EN 25080:1993. Sisal agricultural twines
BS EN 251:1992. Shower trays. Connecting dimensions
BS EN 251:2003. Shower trays. Connecting dimensions
BS EN 251:2012. Shower trays. Connecting dimensions
BS EN 2511:2005. Aluminium alloy AL-P7075-T7351. Plate. 6 mm < a ≤ 100 mm
BS EN 25136:1994, ISO 5136:1990. Acoustics. Determination of sound power radiated into a duct by fans. In-duct method
BS EN 2515:1990. Specification for rod ends, adjustable single fork and threaded shank. Dimensions and loads
BS EN 2516:1997. Passivation of corrosion resisting steels and decontamination of nickel base alloys
BS EN 25163:1994, BS 2000-236:1994,ISO 5163:1990. Methods of test for petroleum and its products. Motor and aviation-type fuels. Determination of knock characteristics. Motor method
BS EN 25164:1994, BS 2000-237:1994,ISO 5164:1990. Methods of test for petroleum and its products. Motor fuels. Determination of knock characteristics. Research method
BS EN 25183-1:1992, ISO 5183-1:1988. Resistance spot welding. Electrode adaptors, male taper 1:10Conical fixing, taper 1:10
BS EN 25183-2:1992, ISO 5183-2:1988. Resistance spot welding. Electrode adaptors, male taper 1:10Parallel shank fixing for end-thrust electrodes
BS EN 25184:1995. Straight resistance spot welding electrodes
BS EN 25199:1992, ISO 5199-1986. Technical specifications for centrifugal pumps. Class II
BS EN 25264-2:1994, ISO 5264-2:1979. Pulps. Laboratory beatingPFI mill method
BS EN 25264-3:1994, ISO 5264-3:1979. Pulps. Laboratory beatingJokro mill method
BS EN 253:1991. Specification for preinsulated bonded pipe systems for underground hot water networks. Pipe assembly of steel service pipes, polyurethane thermal insulation and outer casing of high density polyethylene
BS EN 253:1995. Preinsulated bonded pipe systems for underground hot water networks. Pipe assembly of steel service pipes, polyurethane thermal insulation and outer casing of high density polyethylene
BS EN 253:2003+A2:2006. District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
BS EN 253:2009+A1:2013. District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
BS EN 2535:2011. Aerospace series. Vacuum deposition of cadmium
BS EN 2536:1995. Hard anodizing of aluminium alloys
BS EN 2542:2008. Aerospace series. Steel FE-PL1502 (25CrMo4). Annealed. Bar and wire. De ≤ 40 mm. For prevailing torque nuts
BS EN 2543:2009. Aerospace series. Steel FE-PL1502 (25CrMo4). Annealed. Sheet and strip. 0,3 mm ≤ a ≤ 2 mm. For prevailing torque nuts
BS EN 2544:1990. Specification for representation of rivets on drawings for aerospace equipment
BS EN 2545-1:1995. Titanium and titanium alloy remelting stock and castings. Technical specificationGeneral requirements
BS EN 2545-2:1995. Titanium and titanium alloy remeling stock and castings. Technical specificationRemelting stock
BS EN 2545-3:1995. Titanium and titanium alloy remelting stock and castings. Technical specificationPre-production and production castings
BS EN 2546:1990. Specification for washers, lock with radial serrations in corrosion resisting steel. Dimensions
BS EN 2546:2006. Aerospace series. Washers, lock with radial serrations in corrosion resisting steel passivated for flight control rods. Dimensions
BS EN 2547:1989. Specification for filming of documents. Microfilm 105 mm (Microfiche A6)
BS EN 2549:2006
BS EN 2550:1993. Rivets, solid 100° normal countersunk head, in aluminium 1050A, inch based series
BS EN 2551:1993. Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, inch based series
BS EN 255-1:1997. Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode.Terms, definitions and designations
BS EN 2552:1993. Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, anodized or chromated, inch based series
BS EN 255-2:1997. Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode.Testing and requirements for marking for space heating units
BS EN 2553:1993. Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2017A, inch based series
BS EN 255-3:1997. Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode.Testing and requirements for marking for sanitary hot water units
BS EN 255-4:1997. Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode.Requirements for space heating and sanitary hot water units
BS EN 2555:1993. Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, inch based series
BS EN 2556:1993. Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series
BS EN 2557:1997. Carbon fibre preimpregnates. Determination of mass per unit area
BS EN 2558:1997. Carbon fibre preimpregnates. Determination of the volatile content
BS EN 25580:1992. Specification for minimum requirements for industrial radiographic illuminators for non-destructive testing
BS EN 2559:1997. Carbon fibre preimpregnates. Determination of the resin and fibre content and the mass of fibre per unit area
BS EN 2560:1998. Carbon fibre preimpregnates. Determination of the resin flow
BS EN 2561:1995. Carbon fibre reinforced plastics. Undirectional laminates. Tensile test parallel to the fibre direction
BS EN 2562:1997. Carbon fibre reinforced plastics. Unidirectional laminates. Flexural test parallel to the fibre direction
BS EN 2563:1997. Carbon fibre reinforced plastics. Unidirectional laminates. Determination of the apparent interlaminar shear strength
BS EN 2564:1998. Carbon fibre laminates. Determination of the fibre, resin and void contents
BS EN 2565:2013. Aerospace series. Preparation of carbon fibre reinforced resin panels for test purposes
BS EN 25651:1993, ISO 5651:1989. Specification for units for expressing properties of paper, board and pulps
BS EN 25663:1993, ISO 5663:1984. Water quality. Determination of Kjeldahl nitrogen. Method after mineralization with selenium
BS EN 25667-1:1994, BS 6068-6.1:1981,ISO 5667-1:1980. Water quality. SamplingGuidance on the design of sampling programmes
BS EN 25667-2:1993, BS 6068-6.2:1991,ISO 5667-2:1991. Water quality. SamplingGuidance on sampling techniques
BS EN 2569:1991. Control cable fittings and turnbarrels. Technical specification
BS EN 257:1992. Mechanical thermostats for gas-burning appliances
BS EN 257:2010. Mechanical thermostats for gas-burning appliances
BS EN 2570:1996. Nickel-cadmium batteries. Technical specification
BS EN 2573:2007. Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Softened. Rm ≤ 780 MPa. Wire. 0,25 mm ≤ De ≤ 3 mm
BS EN 2574:1990. Specification for welds. Information on drawings
BS EN 2575:1989. Specification for filming of documents. 16 mm microfilm
BS EN 25754:1993, ISO 5754:1978. Sintered metal materials, excluding hardmetals. Unnotched impact test piece
BS EN 25813:1993, BS 6068-2.3:1993,ISO 5813-1983. Water quality. Determination of dissolved oxygen. Iodometric method
BS EN 25814:1992, ISO 5814:1990. Method for determination of dissolved oxygen in water: electrochemical probe method
BS EN 25817:1992, ISO 5817:1992. Arc-welded joints in steel. Guidance on quality levels for imperfections
BS EN 25821:1992, ISO 5821:1979. Resistance spot welding electrode caps
BS EN 25822:1992, ISO 5822:1988. Spot welding equipment. Taper plug gauges and taper ring gauges
BS EN 25827:1992, ISO 5827:1983. Specification for spot welding. Electrode back-ups and clamps
BS EN 2583:1997. Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1275 MPa (at ambient temperature)/650°C. Technical specification
BS EN 2584:1992. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Narrow series. Elevated loads at ambient temperature. Dimensions and loads
BS EN 2584:2001. Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Narrow series. Elevated load at ambient temperature. Dimensions and loads
BS EN 2585:1992. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Wide series. Elevated loads at ambient temperature. Dimensions and loads
BS EN 2585:2001. Aerospace series. Bearings, spherical plain in corrosion-resisting steel with self-lubricating liner. Elevated load at ambient temperature. Dimensions and loads
BS EN 2586:1991. Specification for washers, lock for flight control rods. Dimensions
BS EN 2587:1990. Specification for rod ends, adjustable double fork and threaded shank. Dimensions and loads
BS EN 2588:1992. Bearings. Spherical plain in corrosion resisting steel with assembly slots. Dimensions and loads
BS EN 2588:2006. Aerospace series. Bearings, spherical plain in corrosion resisting steel with assembly slots. Dimensions and loads
BS EN 259:1992. Specification for heavy duty wall coverings in roll form
BS EN 259:1997. Wallcoverings in roll form. Specification for heavy duty wallcoverings
BS EN 2591:1992. Elements of electrical and optical connection. Test methods. General
BS EN 259-1:2001. Wallcoverings in roll form. Heavy duty wallcoveringsSpecifications
BS EN 2591-100:2005. Aerospace series. Elements of electrical and optical connection. Test methodsGeneral
BS EN 2591-101:1994. Elements of electrical and optical connection. Test methodsVisual examination
BS EN 2591-102:1996. Elements of electrical and optical connection. Test methodsExamination of dimensions and mass
BS EN 2591-201:1996. Elements of electrical and optical connection. Test methodsContact resistance. Low level
BS EN 2591-202:1996. Elements of electrical and optical connection. Test methodsContact resistance at rated current
BS EN 2591-203:1996. Elements of electrical and optical connection. Test methodsElectrical continuity at microvolt level
BS EN 2591-204:1996. Elements of electrical and optical connection. Test methodsDiscontinuity of contacts in the microsecond range
BS EN 2591-205:1996. Elements of electrical and optical connection. Test methodsHousing (shell) electrical continuity
BS EN 2591-206:1996. Elements of electrical and optical connection. Test methodsMeasurements of insulation resistance
BS EN 2591-207:1996. Elements of electrical and optical connection. Test methodsVoltage proof test
BS EN 2591-208:1996. Elements of electrical and optical connection. Test methodsTemperature rise due to rated current
BS EN 2591-209:1996. Elements of electrical and optical connection. Test methodsCurrent temperature derating
BS EN 2591-210:1998. Elements of electrical and optical connection. Test methodsElectrical overload
BS EN 2591-211:2002. Elements of electrical and optical connection. Test methodsCapacitance
BS EN 2591-212:2005. Aerospace series. Elements of electrical and optical connection. Test methodsSurface transfer impedance
BS EN 2591-213:1998. Elements of electrical and optical connection. Test methodsShielding effectiveness from 100 MHz to 1 GHz
BS EN 2591-214:2005. Aerospace series. Elements of electrical and optical connection. Test methodsLightning strike, current and voltage pulse
BS EN 2591-214:2012. Aerospace series. Elements of electrical and optical connection. Test methodsLightning strike, current and voltage pulse
BS EN 2591-216:1998. Elements of electrical and optical connection. Test methodsEngagement depth of contacts
BS EN 2591-217:2002. Elements of electrical and optical connection. Test methodsVoltage drop under specified current for terminal lugs and in-line splices
BS EN 2591-218:2002. Elements of electrical and optical connection. Test methodsAgeing of terminal lugs and in-line splices by temperature and current cycling
BS EN 2591-219:2002. Elements of electrical and optical connection. Test methodsVoltage strength for insulated terminal lugs and in-line splices
BS EN 2591-220:2005. Aerospace series. Elements of electrical and optical connection. Test methodsContact/conductor joint ageing by current and temperature cycling
BS EN 2591-221:2007. Aerospace series. Elements of electrical and optical connection. Test methodsVoltage standing wave ratio (VSWR)
BS EN 2591-222:2007. Aerospace series. Elements of electrical and optical connection. Testm ethodsInsertion loss (I.L.)
BS EN 2591-223:2007. Aerospace series. Elements of electrical and optical connection. Test methodsMeasurement of characteristic impedance of a coaxial connector or contact
BS EN 2591-224:2007. Aerospace series. Elements of electrical and optical connection. Test methodsRF leakage
BS EN 2591-225:2007. Aerospace series. Elements of electrical and optical connection. Test methodsRF high potential withstanding voltage
BS EN 2591-226:2007. Aerospace series. Elements of electrical and optical connection. Test methodsCorona level
BS EN 2591-301:1996. Elements of electrical and optical connection. Test methodsEndurance at temperature
BS EN 2591-302:1998. Elements of electrical and optical connection. Test methodsClimatic sequence
BS EN 2591-303:1998. Elements of electrical and optical connection. Test methodsCold/low pressure and damp heat
BS EN 2591-304:1998. Elements of electrical and optical connection. Test methodsDamp heat steady state
BS EN 2591-305:1998. Elements of electrical and optical connection. Test methodsRapid change of temperature
BS EN 2591-306:1998. Elements of electrical and optical connection. Test methodsMould growth
BS EN 2591-307:1998. Elements of electrical and optical connection. Test methodsSalt mist
BS EN 2591-307:2012. Aerospace series. Elements of electrical and optical connection. Test methodsSalt mist
BS EN 2591-308:1998. Elements of electrical and optical connection. Test methodsSand and dust
BS EN 2591-309:1998. Elements of electrical and optical connection. Test methodsDry heat
BS EN 2591-310:1998. Elements of electrical and optical connection. Test methodsCold
BS EN 2591-311:1998. Elements of electrical and optical connection. Test methodsLow air pressure
BS EN 2591-312:1998. Elements of electrical and optical connection. Test methodsAir leakage
BS EN 2591-313:1998. Elements of electrical and optical connection. Test methodsArtificial rain
BS EN 2591-314:1998. Elements of electrical and optical connection. Test methodsImmersion at low air pressure
BS EN 2591-315:1998. Elements of electrical and optical connection. Test methodsFluid resistance
BS EN 2591-316:1998. Elements of electrical and optical connection. Test methodsOzone resistance
BS EN 2591-317:1998. Elements of electrical and optical connection. Test methodsFlammability
BS EN 2591-318:1998. Elements of electrical and optical connection. Test methodsFire-resistance
BS EN 2591-319:1998. Elements of electrical and optical connection. Test methodsGastightness of solderless wrapped connections
BS EN 2591-320:1998. Elements of electrical and optical connection. Test methodsSimulated solar radiation at ground level
BS EN 2591-321:1998. Elements of electrical and optical connection. Test methodsDamp heat, cyclic test
BS EN 2591-322:1998. Elements of electrical and optical connection. Test methodsHermeticity
BS EN 2591-323:1998. Elements of electrical and optical connection. Test methodsThermal shock
BS EN 2591-324:1998. Elements of electrical and optical connection. Test methodsInterfacial sealing
BS EN 2591-325:2002. Elements of electrical and optical connection. Test methodsIce resistance
BS EN 2591-401:1996. Elements of electrical and optical connection. Test methodsAcceleration, steady state
BS EN 2591-402:1998. Elements of electrical and optical connection. Test methodsShock
BS EN 2591-402:2012. Aerospace series. Elements of electrical and optical connection. Test methodsShock
BS EN 2591-403:1998. Elements of electrical and optical connection. Test methodsSinusoidal and random vibration
BS EN 2591-403:2012. Aerospace series. Elements of electrical and optical connection. Test methodsSinusoidal and random vibration
BS EN 2591-404:1998. Elements of electrical and optical connection. Test methodsTransverse load
BS EN 2591-405:1998. Elements of electrical and optical connection. Test methodsAxial load
BS EN 2591-406:1998. Elements of electrical and optical connection. Test methodsMechanical endurance
BS EN 2591-407:1999. Elements of electrical and optical connection. Test methodsDurability of contact retention system and seals
BS EN 2591-408:1998. Elements of electrical and optical connection. Test methodsMating and unmating forces
BS EN 2591-409:1999. Elements of electrical and optical connection. Test methodsContact retention in insert
BS EN 2591-410:1998. Elements of electrical and optical connection. Test methodsInsert retention in housing (axial)
BS EN 2591-411:1998. Elements of electrical and optical connection. Test methodsInsert retention in housing (torsional)
BS EN 2591-412:1999. Elements of electrical and optical connection. Test methodsContact insertion and extraction forces
BS EN 2591-413:1998. Elements of electrical and optical connection. Test methodsHolding force of grounding spring system
BS EN 2591-414:1998. Elements of electrical and optical connection. Test methodsUnmating of lanyard release connectors
BS EN 2591-415:2001. Elements of electrical and optical connection. Test methodsTest probe damage (female contacts)
BS EN 2591-416:2001. Elements of electrical and optical connection. Test methodsContact bending strength
BS EN 2591-417:2001. Elements of electrical and optical connection. Test methodsTensile strength (crimped connection)
BS EN 2591-418:2001. Elements of electrical and optical connection. Test methodsGauge insertion/extraction forces (female contacts)
BS EN 2591-419:2001. Elements of electrical and optical connection. Test methodsStability of male contacts in insert
BS EN 2591-420:2001. Elements of electrical and optical connection. Test methodsMechanical strength of rear accessories
BS EN 2591-420:2006. Aerospace series. Elements of electrical and optical connection. Test methodsMechanical strength of rear accessories
BS EN 2591-421:2002. Elements of electrical and optical connection. Test methodsFree fall
BS EN 2591-422:2002. Elements of electrical and optical connection. Test methodsLocking wire hole strength
BS EN 2591-423:2006. Aerospace series. Elements of electrical and optical connection. Test methodsConnector rear accessories thread strength
BS EN 2591-424:2001. Elements of electrical and optical connection. Test methodsStripping force, solderless wrapped connections
BS EN 2591-425:2001. Elements of electrical and optical connection. Test methodsUnwrapping capability, solderless wrapped connections
BS EN 2591-426:2001. Elements of electrical and optical connection. Test methodsContact retention system effectiveness
BS EN 2591-427:2001. Elements of electrical and optical connection. Test methodsRobustness of protective cover attachment
BS EN 2591-428:2002. Elements of electrical and optical connection. Test methodsSinusoidal vibrations with passage of current for crimped terminal lugs
BS EN 2591-501:2002. Elements of electrical and optical connection. Test methodsSoft solderability
BS EN 2591-502:2001. Elements of electrical and optical connection. Test methodsRestricted entry
BS EN 2591-503:2001. Elements of electrical and optical connection. Test methodsContact deformation after crimping
BS EN 2591-505:2001. Elements of electrical and optical connection. Test methodsContact protection effectiveness (scoop-proof)
BS EN 2591-506:2001. Elements of electrical and optical connection. Test methodsUse of tools
BS EN 2591-507:2002. Elements of electrical and optical connection. Test methodsPlating porosity
BS EN 2591-508:2002. Elements of electrical and optical connection. Test methodsMeasurement of thickness of coating on contacts
BS EN 2591-509:2001. Elements of electrical and optical connection. Test methodsAdhesion of coating on contacts
BS EN 2591-512:2002. Elements of electrical and optical connection. Test methodsEffectiveness of non-removable fixing of hermetically sealed connector shell
BS EN 2591-513:2002. Elements of electrical and optical connection. Test methodsMagnetic permeability
BS EN 2591-514:2002. Elements of electrical and optical connection. Test methodsSolderability of contacts with self-contained solder and flux
BS EN 2591-515:2005. Aerospace series. Elements of electrical and optical connection. Test methodsHydrolytic stability
BS EN 2591-601:2001. Elements of electrical and optical connection. Test methodsOptical elements. Insertion loss
BS EN 2591-602:2001. Elements of electrical and optical connection. Test methodsOptical elements. Variation of attenuation and optical discontinuity
BS EN 2591-603:2002. Elements of electrical and optical connection. Test methodsOptical elements. Change of power distribution
BS EN 2591-604:2001. Elements of electrical and optical connection. Test methodsOptical elements. Cleaning capability of optical face
BS EN 2591-605:2002. Elements of electrical and optical connection. Test methodsOptical elements. Return loss
BS EN 2591-606:2002. Aerospace series. Elements of electrical and optical connection. Test methodsOptical elements. Crosstalk
BS EN 2591-607:2002. Elements of electrical and optical connection. Test methodsOptical elements. Immunity to ambient light coupling
BS EN 2591-609:2005. Aerospace series. Elements of electrical and optical connection. Test methodsOptical elements. Effectiveness of cable attachment. Cable cyclic flexing
BS EN 2591-610:2001. Elements of electrical and optical connection. Test methodsOptical elements. Effectiveness of cable attachment. Cable pulling
BS EN 2591-6101:2001. Elements of electrical and optical connection. Test methodsOptical elements. Visual examination
BS EN 2591-611:2001. Elements of electrical and optical connection. Test methodsOptical elements. Effectiveness of cable attachment. Cable torsion
BS EN 2591-612:2001. Elements of electrical and optical connection. Test methodsOptical elements. Effectiveness of cable attachment. Cable axial compression
BS EN 2591-613:2002. Elements of electrical and optical connection. Test methodsOptical elements. Impact test
BS EN 2591-614:2002. Aerospace series. Elements of electrical and optical connection. Test methodsOptical elements. Connector radial compression
BS EN 2591-615:2001. Elements of electrical and optical connection. Test methodsOptical elements. Connection integrity at temperature
BS EN 2591-617:2002. Aerospace series. Elements of electrical and optical connection. Test methodsOptical elements. Temperature cycling
BS EN 2591-6301:2001. Elements of electrical and optical connection. Test methodsOptical elements. Endurance at temperature
BS EN 2591-6303:2001. Elements of electrical and optical connection. Test methodsOptical elements. Cold/low pressure and damp heat
BS EN 2591-6305:2001. Elements of electrical and optical connection. Test methodsOptical elements. Rapid change of temperature
BS EN 2591-6306:2001. Elements of electrical and optical connection. Test methodsOptical elements. Mould growth
BS EN 2591-6307:2001. Elements of electrical and optical connection. Test methodsOptical elements. Salt mist
BS EN 2591-6314:2001. Elements of electrical and optical connection. Test methodsOptical elements. Immersion at low air pressure
BS EN 2591-6315:2001. Elements of electrical and optical connection. Test methodsOptical elements. Fluid resistance
BS EN 2591-6316:2001. Elements of electrical and optical connection. Test methodsOptical elements. Ozone resistance
BS EN 2591-6317:2002. Elements of electrical and optical connection. Test methodsOptical elements. Flammability
BS EN 2591-6318:2002. Elements of electrical and optical connection. Test methodsOptical elements. Fire resistance
BS EN 2591-6321:2002. Aerospace series. Elements of electrical and optical connection. Test methodsOptical elements. Damp heat, cyclic test
BS EN 2591-6323:2002. Aerospace series. Elements of electrical and optical connection. Test methodsOptical elements. Thermal shock (Hermetically sealed devices)
BS EN 2591-6324:2002. Elements of electrical and optical connection. Test methodsOptical elements. Interfacial sealing
BS EN 2591-6401:2001. Elements of electrical and optical connection. Test methodsOptical elements. Acceleration steady state
BS EN 2591-6402:2001. Elements of electrical and optical connection. Test methodsOptical elements. Shock
BS EN 2591-6403:2001. Elements of electrical and optical connection. Test methodsOptical elements. Vibrations
BS EN 2591-6404:2002. Elements of electrical and optical connection. Test methodsOptical elements. Transverse load
BS EN 2591-6405:2002. Elements of electrical and optical connection. Test methodsOptical elements. Axial load
BS EN 2591-6406:2002. Elements of electrical and optical connection. Test methodsOptical elements. Mechanical endurance
BS EN 2591-6414:2002. Elements of electrical and optical connection. Test methodsOptical elements. Unmating of lanyard release optical connection elements
BS EN 2591-6415:2002. Elements of electrical and optical connection. Test methodsOptical elements. Test probe damage
BS EN 2591-701:2001. Elements of electrical and optical connection. Test methodsElectrical elements. Measurement of open circuit impedance of couplers
BS EN 2591-702:2001. Elements of electrical and optical connection. Test methodsElectrical elements. Measurement of signal distortion of couplers
BS EN 2591-703:2001. Elements of electrical and optical connection. Test methodsElectrical elements. Common mode rejection of couplers
BS EN 2591-704:2001. Elements of electrical and optical connection. Test methodsElectrical elements. Measurement of turns ratio on a transformer used in a coupler
BS EN 2591-705:2001. Elements of electrical and optical connection. Test methodsElectrical elements. Measurement of stub input impedance of couplers
BS EN 2591-706:2001. Elements of electrical and optical connection. Test methodsElectrical elements. Transmission test
BS EN 2591-707:2001. Elements of electrical and optical connection. Test methodsElectrical elements. Measurement of characteristic impedance of a bus or a stub terminator
BS EN 2591-708:2001. Elements of electrical and optical connection. Test methodsElectrical elements. Measurement of surface transfer impedance of couplers
BS EN 2591-709:2001. Elements of electrical and optical connection. Test methodsElectrical elements. Tensile strength of couplers
BS EN 2591-7301:2001. Elements of electrical and optical connection. Test methodsElectrical elements. Temperature endurance of couplers
BS EN 2591-A2:1994. Elements of electrical and optical connection. Test methodsExamination of dimensions and mass
BS EN 2591-B1:1992. Elements of electrical and optical connection. Test methodsContact resistance. Low level
BS EN 2591-B2:1994. Elements of electrical and optical connection. Test methodsContact resistance at rated current
BS EN 2591-B3:1994. Elements of electrical and optical connection. Test methodsElectrical continuity at microvolt level
BS EN 2591-B4:1994. Elements of electrical and optical connection. Test methodsDiscontinuity of contacts in the microsecond range
BS EN 2591-B5:1994. Elements of electrical and optical connection. Test methodsHousing (shell) electrical continuity
BS EN 2591-B6:1994. Elements of electrical and optical connection. Test methodsMeasurement of insulation resistance
BS EN 2591-B7:1994. Elements of electrical and optical connection. Test methodsVoltage proof test
BS EN 2591-B8:1994. Elements of electrical and optical connection. Test methodsTemperature rise due to rated current
BS EN 2591-B9:1994. Elements of electrical and optical connection. Test methodsCurrent temperature derating
BS EN 2591-C1:1992. Elements of electrical and optical connection. Test methodsEndurance at temperature
BS EN 2591-D1:1992. Elements of electrical and optical connection. Test methodsAcceleration, steady state
BS EN 2592:1991. Specification for three-pole circuit breakers, temperature compensated, rated currents up to 25 A. Product standard
BS EN 259-2:2001. Wallcoverings in roll form. Heavy duty wallcoveringsDetermination of impact resistance
BS EN 25923:1994, BS 6535-1:1990,ISO 5923:1989. Fire extinguishing mediaCarbon dioxide
BS EN 2596:1990. Specification for washers, lock, with radial serrations, in corrosion resisting steel, cadmium plated. Dimensions
BS EN 2596:2006. Aerospace series. Washers, lock, with radial serrations in corrosion resisting steel, cadmium plated for flight control rods. Dimensions
BS EN 2597:1998. Carbon fibre reinforced plastics. Unidirectional laminates. Tensile test perpendicular to the fibre direction
BS EN 25978:1993, BS 3424-11:1993,ISO 5978:1990. Rubber- or plastics-coated fabrics. Determination of blocking resistance
BS EN 2599:2001. Aerospace series. Strips in aluminium and aluminium alloys. Thickness 0,25 mm ≤ a ≤ 3.2 mm. Dimensions
BS EN 26:1998. Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
BS EN 2601:1996. Fork ends, adjustable. Technical specification
BS EN 2602:2005. Aerospace series. Ports for adaptors, threaded, with lockring. Geometric configuration
BS EN 2603:2005. Aerospace series. Port ends for adaptors, threaded, with lockring. Geometric configuration
BS EN 2604:2005. Aerospace series. 8° 30' interface for adaptors, threaded, with lockring. Geometric configuration
BS EN 2605:2005. Aerospace series. 24° interface for adaptors, threaded, with lockring. Geometric configuration
BS EN 2606:2009. Aerospace series. 60° interface for adaptors, threaded, with lockring. Geometric configuration
BS EN 2607:2005. Aerospace series. O-rings for adaptors, threaded, with lockring. Survey
BS EN 2608:2005. Aerospace series. Installation and removal requirements for 8° 30' adaptors, threaded, with lockring
BS EN 2609:1989. Specification for turnbarrels, control cable in copper-zinc alloys. Dimensions and loads
BS EN 26098:1994, ISO 6098:1984. Information processing. Self-loading cartridges for 12,7 mm (0,5 in) wide magnetic tape
BS EN 26157-1:1992, ISO 6157-1:1988. Fasteners. Surface discontinuities. Bolts, screws and studs for general requirements
BS EN 26157-3:1992, ISO 6157-3:1988. Fasteners. Surface discontinuities.Bolts, screws and studs for special requirements
BS EN 2617:2001. Aerospace Series. Plates in titanium and titanium alloys. Thickness 6 mm < a ≤ 100 mm. Dimensions
BS EN 2622:2001. Aerospace Series. Circular tubes, for fluids in heat resisting alloys. Diameter 3,2 mm ≤ D ≤ 100 mm. Dimensions
BS EN 2624:2007. Aerospace series. Pressure impulse testing of hydraulic system components
BS EN 26246:1994, BS 2000- 131:1994,ISO 6246:1981. Methods of test for petroleum and its products. Petroleum products. Motor gasoline and aviation fuels. Determination of existent gum. Jet evaporation method
BS EN 263:2002. Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
BS EN 263:2008. Sanitary appliances. Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
BS EN 2630:1994. Aluminium alloy AL-P7009-T74511. Extruded bars and sections a or D ≤ 125 mm with peripheral coarse grain control
BS EN 2632:1994. Aluminium alloy AL-P7075-T73511. Extruded bars and sections a or D ≤ 100 mm with peripheral coarse grain control
BS EN 2632:2005. Aerospace series. Aluminim alloy AL-P7075. T73511. Extruded bar and section. a or D ≤ 150 mm with peripheral coarse grain control
BS EN 2633:1994. Aluminium alloy AL-P2024-T3511. Extruded bars and sections 1,2 mm ≤ a or D ≤ 150 mm with peripheral coarse grain control
BS EN 26330:1994, ISO 6330:1984. Textiles. Domestic washing and drying procedures for textile testing
BS EN 2635:2005. Aerospace series. Aluminium alloy AL-P2014A. T6511. Extruded bar and section. a or D ≤ 200 mm with peripheral coarse grain control
BS EN 2636:1994. Aluminium alloy AL-P6082-T6. Extruded bars and sections a or D ≤ 200 mm with peripheral coarse grain control
BS EN 26360-2:1998. Dentistry. Dental rotary instruments. Number coding systemShape and specific characteristics
BS EN 264:1991. Specification for safety requirements and testing of safety shut-off devices for combustion plants using liquid fuels
BS EN 2641:1989. Specification for control cable assemblies. Combinations and dimensions
BS EN 2644:1998. Rod assemblies for flight controls. Technical specification
BS EN 2645:2005. Aerospace series. Lockrings for adaptors, threaded, with lockring. Dimensions
BS EN 26461-1:1993, BS 6068-4.8:1993,ISO 6461-1:1986. Water quality. Detection and enumeration of the spores of sulfite-reducing anaerobes (Clostridia)Method by enrichment in a liquid medium
BS EN 26461-2:1993, BS 6068-4.9:1993,ISO 6461-2:1986. Water quality. Detection and enumeration of the spores of sulfite-reducing anaerobes (Clostridia)Method by membrane filtration
BS EN 2648:1995. Washers, concave, in alloy steel, cadmium plated
BS EN 2649:1995. Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated. Classification. 900 MPa (at ambient temperature)/235°C
BS EN 2650:1997. Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature) /425°C
BS EN 26501:1992, ISO 6501:1988. Ferronickel. Specification and delivery requirements
BS EN 2651:1997. Screws, pan head, slotted, threaded to head, in brass, tin plated. Classification: 380 MPa (at ambient temperature)/80°C
BS EN 2652:1997. Screws, 100° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235°C
BS EN 26520:1992, ISO 6520:1982. Classification of imperfections in metallic fusion welds, with explanations
BS EN 2653:1997. Screws, 100° countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature) /425°C
BS EN 2654:1997. Screws, 100° countersunk normal head, slotted, threaded to head, in brass, tin plated. Classification: 380 MPa (at ambient temperature)/80°C
BS EN 26553:1991, ISO 6553:1980. Specification for marking of automatic steam traps
BS EN 26554:1991, ISO 6554:1980. Specification for face-to-face dimensions for flanged automatic steam traps
BS EN 2656:2001. Aerospace series. Pipe coupling. Coupling end, welded. Geometric configuration
BS EN 26590-1:1993. Packaging. Sacks. Vocabulary and typesPaper sacks
BS EN 26590-2:1993. Packaging. Sacks. Vocabulary and typesSacks made from thermoplastic flexible film
BS EN 26591-1:1993. Packaging. Sacks. Description and method of measurement.Empty paper sacks
BS EN 26591-2:1993. Packaging. Sacks. Description and method of measurement.Empty sacks made from thermoplastic flexible film
BS EN 26595:1993, BS 6068-2.1:1983,ISO 6595-1985. Water quality. Determination of total arsenic. Silver diethyldithiocarbamate spectrophotometric method
BS EN 26599-1:1993, ISO 6599/1:1983. Packaging. Sacks. Conditioning for testing.Paper sacks
BS EN 266:1992. Specification for textile wallcoverings
BS EN 2665-001:1999. Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 ATechnical specification
BS EN 2665-003:1999. Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 AMetric thread terminals. Product standard
BS EN 2665-004:1999. Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 AUNC thread terminals. Product standard
BS EN 2667-6:2001. Aerospace series. Non-metallic materials. Foaming structural adhesives. Test methodsDetermination of water absorption
BS EN 267:1991. Methods of test for atomizing oil burners of the monobloc type
BS EN 267:1999. Forced draught oil burners. Definitions, requirements, testing, marking
BS EN 267:2009+A1:2011. Automatic forced draught burners for liquid fuels
BS EN 26704:1991, ISO 6704:1982. Classification of automatic steam traps
BS EN 26777:1993, BS 6068-2.16:1984,ISO 6777-1984. Water quality. Physical, chemical and biochemical methods. Determination of nitrite: molecular absorption spectrometric method
BS EN 26789:1994, ISO 6789:1992. Assembly tools for screws and nuts. Hand torque tools. Requirements and test methods
BS EN 268:1991. Specification for propellants for commercial ammunition. Requirements and test methods
BS EN 26801:1993+A1:2011. Rubber and plastics hoses. Determination of volumetric expansion
BS EN 26802:1993, ISO 6802:1991. Rubber and plastics hoses and hose assemblies. Wire reinforced. Hydraulic impulse test with flexing
BS EN 2681:2004. Aerospace series. Aluminium alloy AL-P7010-T74. Hand and die forgings. a ≤ 150 mm
BS EN 2684:2004. Aerospace series. Aluminium alloy AL-P7010-T7651. Plate. 6 mm < a ≤ 140 mm
BS EN 26847:1994, ISO 6847:1985. Covered electrodes for manual metal arc welding. Deposition of a weld metal pad for chemical analysis
BS EN 26848:1991, ISO 6848:1984. Specification for tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding
BS EN 2687:2004. Aerospace series. Aluminium alloy AL-P7010-T7451. Plate. 6 mm < a ≤ 160 mm
BS EN 26874:1992, ISO 6874:1988. Specification for dental resin-based pit and fissure sealants
BS EN 26891:1991, ISO 6891:1983. Timber structures. Joints made with mechanical fasteners. General principles for the determination of strength and deformation characteristics
BS EN 269:1995. Respiratory protective devices. Specification for powered fresh air hose breathing apparatus incorporating a hood
BS EN 26922:1993, ISO 6922:1987. Adhesives. Determination of tensile strength of butt joints
BS EN 26927:1991, ISO 6927:1981. Building construction. Jointing products. Sealants. Vocabulary
BS EN 2693:1994. Aluminium alloy. AL-P5086-H111. Sheet and strip 0,3 mm ≤ a ≤ 6 mm
BS EN 2693:2005. Aerospace series. Aluminium alloy AL-P5086-H111. Sheet and strip. 0,3 mm ≤a ≤6 mm
BS EN 2694:1994. Aluminium alloy. AL-P6061-T6 or T62. Sheet and strip 0,4 mm ≤ a ≤ 6 mm
BS EN 2694:2005. Aerospace series. Aluminium alloy AL-P6061-T6 or T62. Sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 26948:1991, ISO 6948:1981. Specification for production and performance characteristic tests for automatic steam traps
BS EN 2695:1994. Aluminium alloy. AL-P6081-T6. Sheet and strip 0,3 mm ≤ a ≤ 6 mm
BS EN 2695:2005. Aerospace series. Aluminium alloy AL-P6081-T6. Sheet and strip. 0,3 mm ≤a ≤6 mm
BS EN 2696:1994. Aluminium alloy. AL-P7075-T6 or T62. Sheet and strip 0,4 mm ≤ a ≤ 6 mm
BS EN 2696:2005. Aerospace series. Aluminium alloy AL-P7075-T6 or T62. Sheet and strip. 0,4 mm ≤a ≤6 mm
BS EN 270:1995. Respiratory protective devices. Compressed air line breathing apparatus incorporating a hood. Requirements, testing, marking
BS EN 2702:2005. Aerospace series. Aluminium alloy. AL-P6061. T6 or T62. Drawn or extruded bar and section. a or D ≤ 200 mm
BS EN 27023:1993, ISO 7023:1983. Packaging. Sacks. Method of sampling empty sacks for testing
BS EN 27027:1994, BS 6068-2.13:1994,ISO 7027:1990. Water quality. Determination of turbidity
BS EN 2703:2005. Aerospace series. Aluminium alloy AL-P2024-T4 or T42. Clad sheet and strip. 0,3 mm ≤ a ≤ 6 mm
BS EN 271:1995. Respiratory protective devices. Compressed air line or powered fresh air hose breathing apparatus incorporating a hood for use in abrasive blasting operations. Requirements, testing, marking
BS EN 2713-002:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°CScreened and jacketed. General
BS EN 2713-003:2005. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200 °CScreened (spiral) and jacketed, ink jet printable. Product standard
BS EN 2713-004:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°CScreened (braided) and jacketed, ink jet printable. Product standard
BS EN 2713-005:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°CScreened (spiral) and jacketed, CO2 laser printable. Product standard
BS EN 2713-007:2005. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°CScreened (spiral) and jacketed, UV laser printable. Product standard
BS EN 2713-008:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°Screened (braided) and jacketed, UV laser printable. Product standard
BS EN 2713-009:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°CScreened (spiral) and jacketed, YAG X3 laser printable. Product standard
BS EN 2713-010:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°CScreened (braided) and jacketed, YAG X3 laser printable. Product standard
BS EN 2713-011:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°CSilver plated copper screened (spiral) and jacketed, UV laser printable. Product standard
BS EN 2714-002:2005. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°CScreened and jacketed. General
BS EN 2714-002:2012. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°CScreened and jacketed. General
BS EN 2714-003:2005. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°CScreened (spiral) and jacketed, ink jet printable. Product standard
BS EN 2714-004:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°CScreened (braided) and jacketed, ink jet printable. Product standard
BS EN 2714-005:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°CScreened (spiral) and jacketed, CO2 laser printable. Product standard
BS EN 2714-006:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°CScreened (braided) and jacketed, CO2 laser printable. Product standard
BS EN 2714-007:2005. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°CScreened (spiral) and jacketed, UV laser printable. Product standard
BS EN 2714-008:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°CScreened (braided) and jacketed, UV laser printable. Product standard
BS EN 2714-009:2007. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55 °C and 260 °CScreened (spiral) and jacketed, YAG X3 laser printable. Product standard
BS EN 2714-010:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°CScreened (braided) and jacketed, YAG X3 laser Printable. Product standard
BS EN 2714-011:2005. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°CDM family, screened (spiral) and jacketed, UV laser printable. Product standard
BS EN 2714-012:2005. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°CDM family, screened (braided) and jacketed, UV laser printable. Product standard
BS EN 2714-013:2005. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°CDR family, screened (spiral) and jacketed, UV laser printable. Product standard
BS EN 2714-014:2009. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°CDR family, 5 to 10 cores, taped, screened (braided) and jacketed, UV laser printable. Product standard
BS EN 27185:1992, ISO/IEC 7185:1990. Information technology. Programming languages. Pascal
BS EN 27201-1:1994, ISO 7201-1:1989. Fire protection. Fire extinguishing media. Halogenated hydrocarbonsSpecifications for halon 1211 and halon 1301
BS EN 27201-2:1994, ISO 7201-2:1991. Fire protection. Fire extinguishing media. Halogenated hydrocarbonsCode of practice for safe handling and transfer procedures
BS EN 27213:1993, ISO 7213:1981. Method for sampling pulps for testing
BS EN 27243:1994, ISO 7243:1989. Hot environments. Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)
BS EN 27286:1992, ISO 7286:1986. Graphical symbols for resistance welding equipment
BS EN 273:1992. Wood preservatives. Determination of the curative action against Lyctus brunneus (Stephens) (Laboratory method)
BS EN 2731:2005. Aerospace series. Magnesium alloy MG-C46001. T6. Sand casting
BS EN 2732:2005. Magnesium alloy MG-C46001-T6. Chill casting
BS EN 27326:1993, ISO 7326:1991. Rubber and plastics hoses. Assessment of ozone resistance under static conditions
BS EN 27372:1992, ISO 7372:1986. Trade data interchange. Trade data elements directory
BS EN 27389:1991, ISO 7389:1987. Building construction. Jointing products. Determination of elastic recovery
BS EN 27390:1991, ISO 7390:1987. Building construction. Jointing products. Determination of resistance to flow
BS EN 274:1993. Sanitary tapware. Waste fittings for basins, bidets and baths. General technical specifications
BS EN 274-1:2002. Waste fittings for sanitary appliancesRequirements
BS EN 27418:1994, ISO 7418:1989. Leisure accommodation vehicles. Vocabulary
BS EN 274-2:2002. Waste fitting for sanitary appliancesTest methods
BS EN 274-3:2002
BS EN 274-3:2002. Waste fittings for sanitary appliancesQuality control
BS EN 27434:1992, ISO 7434:1983. Slotted set screws with cone point
BS EN 27435:1992, ISO 7435:1983. Slotted set screws with long dog point
BS EN 27436:1992, ISO 7436:1983. Slotted set screws with cup point
BS EN 2744:1992. Non-metallic materials. Preferred test temperatures
BS EN 2746:1998. Glass fibre reinforced plastics. Flexural test. Three point bend method
BS EN 2747:1998. Glass fibre reinforced plastics. Tensile test
BS EN 27490:1992, ISO 7490:1990. Specification for dental gypsum-bonded casting investments for gold alloys
BS EN 27493:1991, ISO 7493:1985. Specification for dental operator's stool
BS EN 275:1992. Wood preservatives. Determination of the protective effectiveness against marine borers
BS EN 27501-1:1993, ISO/IEC 7501-1:1991. Identification cards. Machine readable travel documentsMachine readable passport
BS EN 2752:1990. Specification for nuts, anchor, self locking fixed, two lug, reduced series, with counterbore. Classification: 1100 MPa/235°C
BS EN 2754:2006. Aerospace series. Nuts, anchor, self locking, two lug, floating with counterbore. Classification: 1100 MPa/235°C
BS EN 2755:2009. Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Elevated load at ambient temperature. Technical specification
BS EN 2756:2010. Aerospace series. Lamps, incandescent. Test methods
BS EN 2757:2011. Aerospace series. Structural adhesives system. Test method. Determination of the drying and ignition residues of primers
BS EN 27627-1:1993, ISO 7627-1:1983. Hardmetals. Chemical analysis by flame atomic absorption spectrometry.General requirements
BS EN 27627-2:1993, ISO 7627-2:1983. Hardmetals. Chemical analysis by flame atomic absorption spectrometryDetermination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m)
BS EN 27627-3:1993, ISO 7627-3:1983. Hardmetals. Chemical analysis by flame atomic absorption spectrometry.Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m)
BS EN 27627-4:1993, ISO 7627-4:1985. Hardmetals. Chemical analysis by flame atomic absorption spectrometry.Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m)
BS EN 27627-5:1993, ISO 7627-5:1985. Hardmetals. Chemical analysis by flame atomic absorption spectrometry.Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m)
BS EN 27627-6:1993, ISO 7627-6:1985. Hardmetals. Chemical analysis by flame atomic absorption spectrometry.Determination of chromium in contents 0,01 to 2 % (m/m)
BS EN 277:1996. Sacks for the transport of food aid. Sacks made of woven polypropylene fabric
BS EN 27721:1992, ISO 7721:1983. Countersunk head screws. Head configuration and gauging
BS EN 27726:1994, ISO 7726:1985. Thermal environments. Instruments and methods for measuring physical quantities
BS EN 27740:1992, ISO 7740:1985. Specification for dimensions of surgical scalpels with detatchable blades
BS EN 27785-1:1994, ISO 7785-1:1992. Specification for dental handpiecesDental handpieces and accessories. Handpieces. Specification for high-speed air-turbine handpieces
BS EN 27785-2:1994, ISO 7785-2:1991. Specification for dental handpiecesDental handpieces and accessories. Dental handpieces. Specification for straight and geared angle handpieces
BS EN 27786:1992, ISO 7786:1990. Specification for dental rotary instruments. Laboratory abrasive instruments
BS EN 27787-3:1994, ISO 7787-3:1991. Specification for dental rotary instruments. CuttersCarbide laboratory cutters for milling machines
BS EN 278:1991. Specification for rubber materials for diaphragms in domestic appliances using combustible gases up to 200 mbar
BS EN 2781:1998. Non-metallic materials. Structural adhesives. Test methods. Determination of the primer thickness
BS EN 27810:1991, ISO 7810:1985. Guide to design, construction and use of identification cards
BS EN 27813:1992, ISO/IEC 7813:1990. Identification cards. Financial transaction cards
BS EN 27816-1:1991, ISO 7816-1:1987. Guide to design and use of identification cards having integrated circuits with contactsPhysical characteristics
BS EN 27816-2:1991, ISO 7816-2:1988. Guide to design and use of identification cards having integrated circuits with contactsContact locations and minimum size
BS EN 27828:1994, ISO 7828-1985. Water quality. Methods for biological testing. Methods of biological sampling: guidance on handnet sampling of aquatic benthic macro-invertebrates
BS EN 27841:1991, ISO 7841:1988. Methods for determination of steam loss of automatic steam traps
BS EN 27842:1991, ISO 7842:1988. Methods for determination of discharge capacity of automatic steam traps
BS EN 2786:2008. Aerospace series. Electrolytic silver plating of fasteners
BS EN 27888:1993, BS 6068-2.35:1993,ISO 7888:1985. Water quality. Method for the determination of electrical conductivity
BS EN 279:1991. Specification for homogenous rubber materials for dynamic seals in domestic appliances using combustible gases up to 200 mbar
BS EN 2790:1991. Rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank with engagement: 1.5 thread. Dimensions and loads
BS EN 2791:1991. Rod ends, adjustable, single fork and threaded shank with engagement: 1.5 thread diameter. Dimensions and loads
BS EN 2792:1991. Rod ends, adjustable, double fork and threaded shank with engagement: 1.5 thread diameter. Dimensions and loads
BS EN 27931:1992, ISO 7931:1985. Specification for insulation caps and bushes for resistance welding equipment
BS EN 2794-001:1999. Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 ATechnical specification
BS EN 2794-003:1999. Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 AMetric thread terminals. Product standard
BS EN 2794-004:1999. Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 AUNC thread terminals. Product standard
BS EN 27941:1994, BS 2000-405:1994,ISO 7941:1988. Methods of test for petroleum and its products. Commercial propane and butane. Analysis by gas chromatography
BS EN 27942:1994. Information processing systems. Computer graphics. Graphical Kernel Systems (GKS) functional description
BS EN 27963:1992, ISO 7963:1985. Specification for calibration block No. 2 for ultrasonic examination of welds
BS EN 27965-1:1993, ISO 7965-1:1984. Packaging. Sacks. Drop testPaper sacks
BS EN 27982-1:1991, ISO 7982-1:1987. Bank telecommunication. Funds transfer messagesVocabulary and data elements
BS EN 280:2001+A2:2009. Mobile elevating work platforms. Design calculations. Stability criteria. Construction. Safety. Examinations and tests
BS EN 280:2013. Mobile elevating work platforms. Design calculations. Stability criteria. Construction. Safety. Examinations and tests
BS EN 2802:2005. Aluminium alloy AL-P7475-T761. Sheet and strip. 0,6 mm ≤ a ≤ 6 mm
BS EN 28028:1993, ISO 8028:1987. Rubber and/or plastics hose assemblies for airless paint spraying. Specification
BS EN 28029:1993, ISO 8029:1985. Plastics hose. General purpose collapsible water hose, textile reinforced. Specification
BS EN 2803:2005. Aerospace series. Aluminium alloy AL-P7475-T761. Clad sheet and strip. 1,0 mm ≤ a ≤ 6 mm
BS EN 28030:1993, ISO 8030-1987. Rubber or plastics hoses for underground mining. Method of test for flammability.
BS EN 28031:1993, ISO 8031:1987. Rubber and plastics hoses and hose assemblies. Determination of electrical resistance
BS EN 28033:1993, ISO 8033:1991. Rubber and plastics hose. Determination of adhesion between components
BS EN 28049:1992, ISO 8049:1988. Ferronickel shot. Sampling for analysis
BS EN 28050:1992, ISO 8050:1988. Ferronickel ingots or pieces. Sampling for analysis
BS EN 28064:1994, ISO 8064-1985. Information processing. Reels for 12,7 mm (0,5 in) wide magnetic tapes. Sizes 16, 18 and 22
BS EN 28073:1994, ISO/IEC 8073:1992. Information technology. Telecommunications and information exchange between systems. Open Systems Interconnection. Protocol for providing the connection-mode transport service
BS EN 2808:1997. Anodizing of titanium and titanium alloys
BS EN 2809:2001. Aerospace series. Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated. Classification. 900 MPa (at ambient temperature)/650°C
BS EN 28092-1:1992, ISO 8092-1:1989. Road vehicles. Flat, quick-connect terminationsTabs for single pole connections
BS EN 28092-2:1992, ISO 8092-2:1988. Road vehicles. Flat, quick-connect terminationsTests and performance requirements for single pole connections
BS EN 28094:1994, ISO 8094:1984. Steel cord conveyor belts. Adhesion strength test of the cover to the core layer
BS EN 2810:2001. Aerospace series. Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated. Classification: 900 MPa (at ambient temperature)/650°C
BS EN 2812:2009. Aerospace series. Stripping of electric cables
BS EN 2815:2009. Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D ≤ 200 mm. Rm ≥ 965 MPa
BS EN 28167:1992, ISO 8167:1989. Specification for projections for resistance welding
BS EN 2817:2009. Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D ≤ 200 mm. Rm ≥ 1070 MPa
BS EN 2818:2009. Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1070 MPa
BS EN 28187:1992, ISO 8187:1991. Household refrigerating appliances. Refrigerator-freezers. Characteristics and test methods
BS EN 282:1997. Avalanche beacons. Transmitter/receiver systems. Safety requirements and testing
BS EN 28206:1992. Acceptance tests for oxygen cutting machines. Reproducible accuracy. Operational characteristics
BS EN 2821:2007. Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D ≤ 200 mm. Rm ≥ 1310 MPa
BS EN 28233:1992, BS 2782-11:Method 1131:1992,ISO 8233:1988. Thermoplastics valves. Torque. Test method
BS EN 2824:2011. Aerospace series. Burning behaviour of non-metallic materials under the influence of radiating heat and flames. Determination of smoke density and gas components in the smoke of materials. Test equipment apparatus and media
BS EN 2825:2011. Aerospace series. Burning behaviour of non metallic materials under the influence of radiating heat and flames. Determination of smoke density
BS EN 2826:2011. Aerospace series. Burning behaviour of non metallic materials under the influence of radiating heat and flames. Determination of gas components in the smoke
BS EN 28265:1994, ISO 8265:1988. Water quality. Biological methods. Methods of biological sampling: guidance on the design and use of quantitative samplers for benthic macro-invertebrates on stony substrata in shallow freshwater
BS EN 2828:1993. Adhesion test for metallic coatings by burnishing
BS EN 2829:1995. Adhesion test for metallic coatings by shot peening
BS EN 283:1991. Swap bodies. Testing
BS EN 2830:1993. Adhesion test for metallic coatings by shearing action
BS EN 2831:1993. Hydrogen embrittlement of steels. Test by slow bending
BS EN 28317:1993, ISO 8317:1989. Child-resistant packaging. Requirements and testing procedures for reclosable packages
BS EN 28318:1992, ISO 8318:1986. Complete, filled transport packages. Methods for determination of resistance to sinusoidal variable frequency vibration
BS EN 2832:1993. Hydrogen embrittlement of steels. Notched specimen test
BS EN 2833-005:2013. Aerospace series. Glass fibre thermosetting preimpregnates. Technical specificationGlass fabric/phenolic resin preimpregnate
BS EN 28339:1991, ISO 8339:1984. Building construction. Jointing products. Sealants. Determination of tensile properties
BS EN 28340:1991, ISO 8340:1984. Building construction. Jointing products. Sealants. Determination of tensile properties at maintained extension
BS EN 2835:2012. Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 40 IRHD
BS EN 2836:2012. Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 50 IRHD
BS EN 28362-1:1993, ISO 8362-1:1989. Injection containers for injectables and accessories.Injection vials made of glass tubing
BS EN 28362-2:1993, ISO 8362-2:1988. Injection containers for injectables and accessories.Closures for injection vials
BS EN 28362-3:1993, ISO 8362-3:1989. Injection containers for injectables and accessoriesAluminium caps for injection vials
BS EN 28362-4:1993, ISO 8362-4:1989. Injection containers for injectables and accessories.Injection vials made of moulded glass
BS EN 2837:2012. Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 60 IRHD
BS EN 2838:2013. Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 70 IRHD
BS EN 2839:2013. Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 80 IRHD
BS EN 28394:1991, ISO 8394:1988. Building construction. Jointing products. Determination of extrudability of one-component sealants
BS EN 284:1992. Swap bodies. Swap bodies of class C. Dimensions and general requirements
BS EN 284:2006. Swap bodies. Non-stackable swap bodies of class C. Dimensions and general requirements
BS EN 2840:2013. Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 50 IRHD
BS EN 2841:2013. Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 60 IRHD
BS EN 2842:2013. Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 70 IRHD
BS EN 2843:2013. Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 80 IRHD
BS EN 28430-1:1992, ISO 8430-1:1988. Specification for resistance spot welding. Electrode holders.Taper fixing 1:10
BS EN 28430-2:1992, ISO 8430-2:1988. Specification for resistance spot welding. Electrode holders.Morse taper fixing
BS EN 28430-3:1992, ISO 8430-3:1988. Specification for resistance spot welding. Electrode holders.Parallel shank fixing for end thrust
BS EN 2844:2013. Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 90 IRHD
BS EN 2845:2013. Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 50 IRHD
BS EN 2846:2013. Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 60 IRHD
BS EN 2847:2013. Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 70 IRHD
BS EN 28474:1993, ISO 8474:1986. Complete, filled transport packages. Method for determination of resistance to immersion in water
BS EN 2848:2013. Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 80 IRHD
BS EN 28485:1993, ISO 8485:1989. Specification for programming language: APL
BS EN 2849:2013. Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 90 IRHD
BS EN 285:1997. Sterilization. Steam sterilizers. Large sterilizers
BS EN 285:2006+A2:2009. Sterilization. Steam sterilizers. Large sterilizers
BS EN 2851:1992. Marking of parts and assemblies other than engines. Indications on drawings
BS EN 28510-1:1993, ISO 8510-1:1990. Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly90° peel
BS EN 28510-2:1993, ISO 8510-2:1990. Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly180° peel
BS EN 2852:2010. Aerospace series. Nuts, hexagonal, plain, normal height, normal across flats, heat resisting steel passivated. Classification: 1100 MPa/650°C
BS EN 2853:2005. Current ratings for electrical cables with conductor EN 2083
BS EN 2854-002:2009. Aerospace series. Cables, electrical for general purpose. Cross sections equal to and greater than 9 mm2. Operating temperatures between -55°C and 260°CGeneral
BS EN 2856:2006. Aerospace series. Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore. Classification: 1100 MPa/235°C
BS EN 2858-1:1994. Titanium and titanium alloys. Forging stock and forgings. Technical specifications.General requirements
BS EN 2858-2:1994. Titanium and titanium alloys. Forging stock and forgings. Technical specification.Forging stock
BS EN 28583:1991, ISO 8583:1987. Bank card originated messages. Interchange message specifications. Content for financial transactions
BS EN 2858-3:1994. Titanium and titanium alloys. Forging stock and forgings. Technical specifications.Pre-production and production forgings
BS EN 2859:1995. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C
BS EN 2859:2006. Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) / 235°C
BS EN 28601:1992, ISO 8601:1988. Specification for representation of dates and times in information interchange
BS EN 286-1:1991. Simple unfired pressure vessels designed to contain air or nitrogenDesign, manufacture and testing
BS EN 286-1:1998+A2:2005. Simple unfired pressure vessels designed to contain air or nitrogenPressure vessels for general purposes
BS EN 286-2:1992. Simple unfired pressure vessels designed to contain air or nitrogenSpecification for pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers
BS EN 2862:2009. Aerospace series. Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/235°C
BS EN 286-3:1995. Simple unfired pressure vessels designed to contain air or nitrogenSteel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
BS EN 2863:2010. Aerospace series. Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature) / 315°C
BS EN 28630-1:1992, ISO 8630-1:1987. Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 13 262 ftprad, on 80 tracks each sideDimensional, physical and magnetic characteristics
BS EN 28630-2:1992, ISO 8630-2:1987. Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 13 262 ftprad, on 80 tracks each sideTrack format A for 77 tracks
BS EN 28630-3:1992, ISO 8630-3:1987. Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 13 262 ftprad, on 80 tracks each sideTrack format B for 80 tracks
BS EN 28631:1993, ISO/IEC 8631:1989. Information technology. Program constructs and conventions for their representation
BS EN 28632-1:1992, ISO 8632-1:1987. Specification for computer graphics: metafile for the storage and transfer of picture description information (CGM).Functional specification
BS EN 28632-1:1994. Information technology. Computer graphics. Metafile for the storage and transfer of picture description informationFunctional specifications
BS EN 28632-2:1992, ISO 8632-2:1987. Specification for computer graphics: metafile for the storage and transfer of picture description information (CGM).Character encoding
BS EN 28632-2:1994. Information technology. Computer graphics. Metafile for the storage and transfer of picture description informationCharacter encoding
BS EN 28632-3:1992, ISO 8632-3:1987. Specification for computer graphics: metafile for the storage and transfer of picture description information (CGM).Binary encoding
BS EN 28632-3:1994. Information technology. Computer graphics. Metafile for the storage and transfer of picture description informationBinary encoding
BS EN 28632-4:1992, ISO 8632-4:1987. Specification for computer graphics: metafile for the storage and transfer of picture description information (CGM).Clear text encoding
BS EN 28632-4:1994. Information technology. Computer graphics. Metafile for the storage and transfer of picture description informationClear text encoding
BS EN 286-4:1995. Simple unfired pressure vessels designed to contain air or nitrogenAluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
BS EN 2865:2009. Aerospace series. Nuts, anchor, self-locking, floating, two lugs, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature) / 315 °C
BS EN 28651-1:1992, ISO 8651-1:1988. Information processing systems. Computer graphics. Graphical Kernel System (GKS) language bindingsFORTRAN
BS EN 28651-2:1992, ISO 8651-2:1988. Information processing systems. Computer graphics. Graphical Kernel System (GKS) language bindingsPascal
BS EN 28651-3:1992, ISO 8651-3:1988. Information processing systems. Computer graphics. Graphical Kernel System (GKS) language bindingsAda
BS EN 28653:1993. Jewellery. Ring-sizes. Definition, measurement and designation
BS EN 28654:1993, ISO 8654:1987. Colours of gold alloys. Definition, range of colours and designation
BS EN 28659:1992, BS 2782-11:Method 1132:1992,ISO 8659:1989. Thermoplastics valves. Fatigue strength. Test method
BS EN 2866:2009. Aerospace series. Nuts, anchor, self-locking, floating, one lug, with counterbore, in steel, cadmium plated, MoS2 lubricated. Classification: 1110 MPa (at ambient temperature)/235°C
BS EN 28662-1:1993, ISO 8662-1:1988. Hand-held portable power tools. Measurement of vibrations at the handleGeneral
BS EN 28662-2:1995. Hand-held portable power tools. Measurement of vibrations at the handleChipping hammers and riveting hammers
BS EN 28662-3:1995. Hand-held portable power tools. Measurement of vibrations at the handleRock drills and rotary hammers
BS EN 28662-5:1995. Hand-held portable power tools. Measurement of vibrations at the handlePavement breakers and hammers for construction work
BS EN 2867:2009. Aerospace series. Nuts, anchor, self-locking, floating, one lug, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature) / 315 °C
BS EN 28673:1992, ISO 8673:1988. Hexagon nuts, style 1, with metric fine pitch thread. Product grades A and B
BS EN 28674:1992, ISO 8674:1988. Hexagon nuts, style 2, with metric fine pitch thread. Product grades A and B
BS EN 28675:1992, ISO 8675:1988. Hexagon thin nuts with metric fine pitch thread. Product grades A and B
BS EN 28676:1992, ISO 8676:1988. Hexagon head screws with metric fine pitch thread. Product grades A and B
BS EN 2869:2009. Aerospace series. Nuts, hexagonal, slotted/castellated, normal height, normal accross flats, in heat resisting steel, passivated. Classification: 1100 MPa (at ambient temperature) / 650°C
BS EN 28692:1993, BS 6068-5.10:1990,ISO 8692:1989. Water quality. Biological methods. Fresh water algal growth inhibition test with Scenedesmus subspicatus and Selenastrum capricornutum
BS EN 28701:2012. Intelligent transport systems. Public transport. Identification of Fixed Objects in Public Transport (IFOPT)
BS EN 287-1:1992. Approval testing of welders for fusion weldingSteels
BS EN 287-1:2004. Qualification test of welders. Fusion weldingSteels
BS EN 287-1:2011. Qualification test of welders. Fusion weldingSteels
BS EN 287-2:1992. Approval testing of welders for fusion weldingAluminium and aluminium alloys
BS EN 28733:1992, ISO 8733:1986. Parallel pins with internal thread, unhardened
BS EN 28734:1992, ISO 8734:1987. Parallel pins, hardened (dowel pins)
BS EN 28735:1992, ISO 8735:1987. Parallel pins with internal thread, hardened
BS EN 28736:1992, ISO 8736:1986. Taper pins with internal thread, unhardened
BS EN 28737:1992, ISO 8737:1986. Taper pins with external thread, unhardened
BS EN 28738:1992, ISO 8738:1986. Plain washers for clevis pins. Product grade A
BS EN 28739:1992, ISO 8739-1986. Grooved pins. Full-length parallel grooved, with pilot
BS EN 2874:1996. Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated. Classification: 1550 MPa (at ambient temperature) /315°C
BS EN 28740:1992, ISO 8740:1986. Grooved pins. Full-length parallel grooved, with chamfer
BS EN 28741:1992, ISO 8741:1986. Grooved pins. Half length reverse taper grooved
BS EN 28742:1992, ISO 8742:1986. Grooved pins. Third-length centre grooved
BS EN 28743:1992, ISO 8743:1986. Grooved pins. Half-length centre grooved
BS EN 28744:1992, ISO 8744:1986. Grooved pins. Full length taper grooved
BS EN 28745:1992, ISO 8745:1986. Grooved pins. Half-length taper grooved
BS EN 28746:1992, ISO 8746:1986. Grooved pins with round head
BS EN 28747:1992, ISO 8747:1986. Grooved pins with countersunk head
BS EN 28748:1992, ISO 8748:1987. Spring-type straight pins. Coiled, heavy duty
BS EN 28749:1992, ISO 8749:1986. Pins and grooved pins. Shear test
BS EN 28750:1992, ISO 8750:1987. Spring-type straight pins. Coiled, standard duty
BS EN 28751:1992, ISO 8751:1987. Spring-type straight pins. Coiled, light duty
BS EN 28752:1993, ISO 8752:1987. Spring-type straight pins, slotted
BS EN 287-6:2010. Qualification test of welders. Fusion weldingCast iron
BS EN 28765:1992, ISO 8765:1988. Hexagon head bolts with metric fine pitch thread. Product grades A and B
BS EN 28768:1993, ISO 8768:1986. Complete, filled transport packages. Method for determination of resistance to damage by toppling
BS EN 28805:1992, ISO 8805:1988. Specification for a set of functions for computer graphics programming: Graphical Kernel System for Three Dimensions (GKS-3D)
BS EN 28806-4:1993, BS ISO/IEC 8806-4:1991. Information technology. Computer graphics. Graphical Kernel System for three dimensions (GKS-3D) language bindingsInformation technology. Computer graphics. Graphical Kernel System for three dimensions (GKS-3D) language bindings. C
BS EN 288-1:1992. Specification and approval of welding procedures for metallic materialsGeneral rules for fusion welding
BS EN 288-2:1992. Specification and approval of welding procedures for metallic materialsWelding procedures specification for arc welding
BS EN 2882:2006. Aerospace series. Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature) / 235°C
BS EN 288-3:1992. Specification and approval of welding procedures for metallic materialsWelding procedure tests for the arc welding of steels
BS EN 2883:2009. Aerospace series. Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C
BS EN 28839:1992, ISO 8839:1986. Mechanical properties of fasteners. Bolts, screws, studs and nuts made of non-ferrous metals
BS EN 288-4:1992. Specification and approval of welding procedures for metallic materialsWelding procedure tests for the arc welding of aluminium and its alloys
BS EN 28846:1993. Small craft. Electrical devices. Protection against ignition of surrounding flammable gases
BS EN 28848:1993. Small craft. Remote steering systems
BS EN 28849:1993, ISO 8849:1990. Small craft. Electrically operated bilge-pumps
BS EN 288-5:1995. Specification and approval of welding procedures for metallic materialsApproval by using approved welding consumables for arc welding
BS EN 2885:1996. Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235°C
BS EN 288-6:1995. Specification and approval of welding procedures for metallic materialsApproval related to previous experience
BS EN 2886:1996. Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification. 900 MPa (at ambient temperature)/235°C
BS EN 2887:1995. Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature)/425°C
BS EN 288-7:1995. Specification and approval of welding procedures for metallic materialsApproval by a standard welding procedure for arc welding
BS EN 28872:1993, ISO 8872:1988. Aluminium caps for transfusion, infusion and injection bottles. General requirements and test methods
BS EN 28877:1994, ISO/IEC 8877:1992. Information technology. Telecommunications and information exchange between systems. Interface connector and contact assignments for ISDN Basic Access Interface located at reference points S and T
BS EN 2888:1995. Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature)/425°C
BS EN 288-8:1995. Specification and approval of welding procedures for metallic materialsApproval by a pre-production welding test
BS EN 2888:2006. Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature) / 425°C
BS EN 2889:1995. Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification. 900 MPa (at ambient temperature)/235°C
BS EN 288-9:1999. Specification and approval of welding procedures for metallic materialsWelding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines
BS EN 2889:2006. Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature) / 235°C
BS EN 289:1994. Rubber and plastics machinery. Compression and transfer moulding presses. Safety requirements for the design
BS EN 289:2004+A1:2008. Plastics and rubber machines. Presses. Safety requirements
BS EN 28960:1993, ISO 8960:1991. Refrigerators, frozen food storage cabinets and food freezers for household and similar use. Measurement of emission of airborne acoustical noise
BS EN 2897:1996. Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) /235°C
BS EN 28970:1991, ISO 8970:1989. Timber structures. Testing of joints made with mechanical fasteners. Requirements for wood density
BS EN 2898:2008. Aerospace series. Corrosion and heat resisting steel rivets. Technical specification
BS EN 28996:1994, ISO 8996:1990. Ergonomics. Determination of metabolic heat production
BS EN 29008:1994, ISO 9008:1991. Glass bottles. Verticality. Test method
BS EN 29009:1994, ISO 9009:1991. Glass containers. Height and non-parallelism of finish with reference to container base. Test methods
BS EN 29046:1991, ISO 9046:1987. Building construction. Sealants. Determination of adhesion/cohesion properties at constant temperature
BS EN 29048:1991, ISO 9048:1987. Building construction. Jointing products. Determination of extrudability of sealants using standardized apparatus
BS EN 29052-1:1992, ISO 9052-1:1989. Acoustics. Method for the determination of dynamic stiffness.Materials used under floating floors in dwellings
BS EN 29053:1993, ISO 9053:1991. Acoustics. Materials for acoustical applications. Determination of airflow resistance
BS EN 2906:1994. Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286). Classification: 1100 MPa (at ambient temperature)/650°C
BS EN 2907:1996. Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 1 100 MPa (at ambient temperature)/650°C
BS EN 29070:1993, ISO/IEC 9070:1991. Information technology. SGML support facilities. Registration procedures for public text owner identifiers
BS EN 29073-1:1992, ISO 9073-1:1989. Methods of test for nonwovensMethods of test for nonwovens. Determination of mass per unit area
BS EN 29073-2:1992, ISO 9073-2:1989. Methods of test for nonwovensMethods of test for nonwovens. Determination of thickness
BS EN 29073-3:1992, ISO 9073-3:1992. Methods of test for nonwovensMethods of test for nonwovens. Determination of tensile strength and elongation
BS EN 29073-4:1992, ISO 9073-4:1989. Methods of test for nonwovensMethods of test for nonwovens. Determination of tear resistance
BS EN 2908:1994. Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286). Classification: 1100 MPa (at ambient temperature)/650°C
BS EN 2909:1995. Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification: 1100 MPa (at ambient temperature)/650°C
BS EN 29090:1992, ISO 9090:1989. Specification for gas tightness of equipment for gas welding and allied processes
BS EN 29092:1992, ISO 9092:1988. Textiles. Nonwovens. Definition
BS EN 291:1992. Rubber seals. Static seals in domestic appliances for combustible gas up to 200 mbar. Specification for material
BS EN 2910:1994. Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286). Classification: 1100 MPa (at ambient temperature)/650°C
BS EN 29104:1993, ISO 9104:1991. Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids
BS EN 2911:1995. Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification: 1100 MPa (at ambient temperature)/650°C
BS EN 29117:1992, ISO 9117:1990. Methods of test for paints. Tests associated with paint film formationPaints and varnishes. Determination of through-dry state and through-dry time. Method of test
BS EN 2912:1996. Washers, flat, large diameter, in aluminium alloy, anodized or chromated
BS EN 2913:1996. Washers, flat, large diameter, in alloy steel, cadmium plated
BS EN 2913:2000. Washers, flat, large diameter, in steel, cadmium plated
BS EN 2914:1996. Washers, flat, large diameter, in heat resisting steel, passivated
BS EN 29142:1993, ISO 9142:1990. Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BS EN 29168:1994, ISO 9168:1991. Dental handpieces. Hose connectors
BS EN 29171-1:1993. Information technology. 130 mm optical disk cartridge, write once, for information interchange.Unrecorded optical disk cartridge
BS EN 29171-2:1993. Information technology. 130 mm optical disk cartridge, write once, for information interchange.Recording format
BS EN 29202:1993, ISO 9202:1991. Jewellery. Fineness of precious metal alloys
BS EN 292-1:1991. Safety of machinery. Basic concepts, general principles for designBasic terminology, methodology
BS EN 292-2:1991. Safety of machinery. Basic concepts, general principles for designTechnical principles and specifications
BS EN 29241-1:1993, ISO 9241-1:1992. Ergonomic requirements for office work with visual display terminals (VDTs)General introduction
BS EN 29241-2:1993, ISO 9241-2:1992. Ergonomic requirements for office work with visual display terminals (VDTs)Guidance on task requirements
BS EN 29241-3:1993, ISO 9241-3:1992. Ergonomic requirements for office work with visual display terminals (VDTs)Visual display requirements
BS EN 2925:1994. Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A 286). Classification: 900 MPa (at ambient temperature)/650°C
BS EN 2926:1996. Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 900 MPa (at ambient temperature)/650°C
BS EN 2927:1996. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classification:1275 MPa (at ambient temperature)/650°C
BS EN 2928:1996. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated. Classification: 1275 MPa (at ambient temperature)/650°C
BS EN 2929:1996. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 MPa (at ambient temperature)/730°C
BS EN 293:1992. Specification for oil pressure atomizing nozzles. Minimum requirements. Testing
BS EN 2930:1996. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. Classification:1210 MPa (at ambient temperature)/730°C
BS EN 2931:1993. Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperature)/650°C
BS EN 29313:1992, ISO 9313:1989. Specification for resistance spot welding equipment. Cooling tubes
BS EN 29314-1:1995, ISO 9314-1:1989. Information processing systems. Fibre Distributed Data Interface (FDDI)Token Ring Physical Layer Protocol (PHY)
BS EN 29314-2:1995, ISO 9314-2:1989. Information processing systems. Fibre Distributed Data Interface (FDDI)Token Ring Media Access Control (MAC)
BS EN 29315:1992, ISO 9315:1989. Information processing systems. Interface between flexible disk cartridge drives and their host controllers
BS EN 29316:1991, ISO 9316:1989. Information processing systems. Small Computer System Interface (SCSI)
BS EN 29318-2:1995. Information technology. Intelligent Peripheral InterfaceDevice specific command set for magnetic disk drives
BS EN 29318-3:1994. Information technology. Intelligent Peripheral InterfaceDevice generic command set for magnetic and optical disk drives
BS EN 29318-4:1994, ISO/IEC 9318-4:1990. Information technology. Intelligent Peripheral InterfaceDevice generic command set for magnetic tape drives
BS EN 2932:1996. Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 900 MPa (at ambient temperature)/650°C
BS EN 2933:1996. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classification:1275 MPa (at ambient temperature)/650°C
BS EN 29333:1992, ISO 9333:1990. Specification for dental brazing materials
BS EN 2934:1996. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated. Classification:1275 MPa (at ambient temperature)/650°C
BS EN 2935:1996. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification:1210 MPa (at ambient temperature)/730°C
BS EN 2936:1996. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. Classification: 1210 MPa (at ambient temperature)/730°C
BS EN 29367-1:1994, ISO 9367-1:1989. Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships. General requirementsCommercial vehicles and combinations of vehicles, semi-trailers excluded
BS EN 29367-2:1995, ISO 9367-2:1994. Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships. General requirementsSemi-trailers
BS EN 2937:1994. Screws, hexagon head, threaded to head in heat resisting steel FE-PA92HT (A286) classification: 900 MPa (at ambient temperature)/650°C
BS EN 2938:1996. Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification: 900 MPa (at ambient temperature)/650°C
BS EN 2939:1994. Screws, 100° countersunk head, offset cruciform recess, threaded to head in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperature)/650°C
BS EN 294:1992. Safety of machinery. Safety distances to prevent danger zones being reached by the upper limbs
BS EN 2940:1996. Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification: 900MPa (at ambient temperature)/650°C
BS EN 29408:1993, BS 6068-5.11:1993,ISO 9408:1991. Water quality. Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds: method by determining the oxygen demand in a closed respirometer
BS EN 2941:2008. Aerospace series. Nickel alloy rivets. Technical specification
BS EN 2942:1998. Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated
BS EN 2943:1998. Inserts, screw thread, helical coil, self-locking. Technical specification
BS EN 29439:1992, BS 6068-5.12:1993,ISO 9439:1990. Water quality. Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds: method by analysis of released carbon dioxide
BS EN 2944:1998. Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
BS EN 2945:1998. Inserts, screw thread, helical coil, self-locking. Assembly procedure
BS EN 29453:1994, ISO 9453:1990. Soft solder alloys. Chemical compositions and forms
BS EN 29454-1:1994, ISO 9454-1:1990. Soft soldering fluxes. Classification and requirementsClassification, labelling and packaging
BS EN 29455-1:1994, ISO 9455-1:1990. Soft soldering fluxes. Test methodsDetermination of non-volatile matter, gravimetric method
BS EN 29455-11:1993, ISO 9455-11:1991. Soft soldering fluxes. Test methods.Solubility of flux residues
BS EN 29455-14:1993, ISO 9455-14:1991. Soft soldering fluxes. Test methods.Assessment of tackiness of flux residues
BS EN 29455-5:1993, ISO 9455-5:1992. Soft soldering fluxes. Test methods.Copper mirror test
BS EN 29455-8:1993, ISO 9455-8:1991. Soft soldering fluxes. Test methods.Determination of zinc content
BS EN 2947:2006. Aerospace series. Steel FE-PA3004 (X10CrNi18-09). Air melted. Non heat treated. Cold drawn wire. a or D ≤ 2,3 mm
BS EN 2948:1997. Washers, tab, in heat resisting steel, passivated
BS EN 2949:1997. Washers, wire locking, in corrosion resisting steel, passivated
BS EN 2950:2008. Aerospace series. Test method. Wrought heat resisting alloys Semifinished products and parts. Conditions for macrographic and micrographic examination. Atlas of structures and defects
BS EN 29506-1:1995. Industrial automation systems. Manufacturing message specificationService definition
BS EN 29506-2:1995. Industrial automation systems. Manufacturing message specificationProtocol specification
BS EN 295-1:1991. Vitrified clay pipes and fittings and pipe joints for drains and sewersRequirements
BS EN 295-1:2013. Vitrified clay pipe systems for drains and sewersRequirements for pipes, fittings and joints
BS EN 295-10:2005. Vitrified clay pipes and fittings and pipe joints for drains and sewersPerformance requirements
BS EN 29519:1994, ISO 9519:1990. Shipbuilding and marine structures. Rungs for dog-step ladders
BS EN 295-2:1991. Vitrified clay pipes and fittings and pipe joints for drains and sewersQuality control and sampling
BS EN 295-2:2013. Vitrified clay pipe systems for drains and sewersEvaluation of conformity and sampling
BS EN 295-3:1991. Vitrified clay pipes and fittings and pipe joints for drains and sewersTest methods
BS EN 295-3:2012. Vitrified clay pipe systems for drains and sewersTest methods
BS EN 29539:1992, ISO 9539:1988. Specification for materials for equipment used in gas welding, cutting and allied processes
BS EN 295-4:1995. Vitrified clay pipes and fittings and pipe joints for drains and sewersRequirements for special fittings, adaptors and compatible accessories
BS EN 295-4:2013. Vitrified clay pipe systems for drains and sewersRequirements for adaptors, connectors and flexible couplings
BS EN 2954-001:2010. Aerospace series. Macrostructure of titanium and titanium alloy wrought productsGeneral requirements
BS EN 2954-002:2010. Aerospace series. Macrostructure of titanium and titanium alloy wrought productsMacrostructure of bar, section, forging stock and forgings
BS EN 2955:1993. Aerospace series. Recycling of titanium and titanium alloy scrap
BS EN 295-5:1994. Vitrified clay pipes and fittings and pipe joints for drains and sewersRequirements for perforated vitrified clay pipes and fittings
BS EN 295-5:2013. Vitrified clay pipe systems for drains and sewersRequirements for perforated pipes and fittings
BS EN 295-6:1996. Vitrified clay pipes and fittings and pipe joints for drains and sewersRequirements for vitrified clay manholes
BS EN 295-6:2013. Vitrified clay pipes systems for drain and sewersRequirements for components of manholes and inspection chambers
BS EN 29564-1:1994. Banking. Personal identification number management and securityPIN protection principles and techniques
BS EN 29564-2:1994, ISO 9564-2:1991. Banking. Personal identification number management and securityApproved algorithm(s) for PIN encipherment
BS EN 295-7:1996. Vitrified clay pipes and fittings and pipe joints for drains and sewersRequirements for vitrified clay pipes and joints for pipe jacking
BS EN 295-7:2013. Vitrified clay pipe systems for drains and sewersRequirements for pipes and joints for pipe jacking
BS EN 29592-1:1991, ISO/IEC 9592-1:1989. Information processing systems. Computer graphics. Programmer's Hierarchical Interactive Graphics System (PHIGS)Functional description
BS EN 29592-2:1991, ISO/IEC 9592-2:1989. Information processing systems. Computer graphics. Programmer's Hierarchical Interactive Graphics System (PHIGS)Archive file format
BS EN 29592-3:1991, ISO/IEC 9592-3:1989. Information processing systems. Computer graphics. Programmer's Hierarchical Interactive Graphics System (PHIGS)Clear-text encoding of archive file
BS EN 29646-1:1992, EN 29646-1:1992. Information technology. Open Systems Interconnection. Conformance testing methodology and frameworkGeneral concepts
BS EN 29646-3:1994, ISO/IEC 9646-3:1992. Information technology. Open Systems Interconnection. Conformance testing methodology and frameworkThe Tree and Tabular Combined Notation (TTCN)
BS EN 29646-5:1992, EN 29646-5:1992. Information technology. Open Systems Interconnection. Conformance testing methodology and frameworkRequirements on test laboratories and clients for the conformance assessment process
BS EN 29653:1994, ISO 9653:1991. Adhesives. Test method for shear impact strength of adhesive bonds
BS EN 29692:1994, ISO 9692:1992. Specification for metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding. Joint preparations for steel
BS EN 297:1994. Gas-fired central heating boilers. Type B$D1$D1 and B$D1$D1$DB$DS boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW
BS EN 29735:1992, ISO 9735:1988. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules
BS EN 29775:1993. Small craft. Remote steering systems for single outboard motors of 15 kW to 40 kW power
BS EN 298:1994. Automatic gas burner control systems for gas burners and gas burning appliances with or without fans
BS EN 298:2003. Automatic gas burner control systems for gas burners and gas burning appliances with or without fans
BS EN 298:2012. Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
BS EN 2985:1996. Nickel-cadmium batteries of format A type
BS EN 2986:1996. Nickel-cadmium batteries of format B type
BS EN 29865:1993, ISO 9865:1991. Textiles. Determination of water repellency of fabrics by the Bundesmann rain-shower test
BS EN 2987:1996. Nickel-cadmium batteries of format C type
BS EN 29873:1994, ISO 9873:1990. Requirements specification for reusable metal dental mirrors and handles
BS EN 2988:1996. Nickel-cadmium batteries of format D type
BS EN 29885:1994, ISO 9885:1991. Wide-mouth glass containers. Deviation from flatness of top sealing surface. Test methods
BS EN 29888:1993, BS 6068-5.13:1993,ISO 9888:1991. Water quality. Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium. Static test (Zahn-Wellens method)
BS EN 29899:1993, ISO/IEC 9899:1990. Programming languages. C
BS EN 299:1999. Oil pressure atomizing nozzles. Determination of the angle and spray characteristics
BS EN 299:2009. Oil pressure atomizing nozzles. Determination of the angle and spray characteristics
BS EN 2991:1996. Nickel-cadmium batteries of format E type
BS EN 29917:1994, ISO 9917:1991. Specification for dental water-based cements
BS EN 2993:1996. Nickel-cadmium batteries of format F type
BS EN 29945-1:1993, ISO/IEC 9945-1:1990. Information technology. Portable operating system interface (POSIX)System application program interface (API) [C LANGUAGE]
BS EN 2995-001:2006. Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 ATechnical specification
BS EN 2995-004:2006. Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 AWith signal contact. Product standard
BS EN 2995-005:2006. Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 AWith polarized signal contact. Product standard
BS EN 2996-001:2006. Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 ATechnical specification
BS EN 2996-004:2006. Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 AWith signal contact. Product standard
BS EN 2996-005:2006. Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 AWith polarized signal contact. Product standard
BS EN 2997-001:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peakTechnical specification
BS EN 2997-001:2011. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peakTechnical specification
BS EN 2997-002:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peakSpecification of performance and contact arrangements
BS EN 2997-002:2012. Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures — 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peakSpecification of performance and contact and contact arrangements
BS EN 2997-003:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peakSquare flange receptacle. Product standard
BS EN 2997-003:2012. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures — 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peakSquare flange receptacle
BS EN 2997-004:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peakJam-nut mounted receptacle. Product standard
BS EN 2997-005:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peakHermetic square flange receptacle. Product standard
BS EN 2997-005:2012. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65°C to 175°C continuous, 200°C continuous, 260°C peakHermetic square flange receptacle. Product standard
BS EN 2997-006:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peakHermetic jam-nut mounted receptacle. Product standard
BS EN 2997-007:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peakHermetic receptacle with round flange attached by welding or brazing. Product standard
BS EN 2997-008:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peakPlug. Product standard
BS EN 2997-009:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peakProtective cover for receptacle. Product standard
BS EN 2997-009:2010. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peakProtective cover for receptacle. Product standard
BS EN 2997-010:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peakProtective cover for plug. Product standard
BS EN 2997-010:2010. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peakProtective cover for plug. Product standard
BS EN 2997-011:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peakDummy receptacle. Product standard
BS EN 2997-011:2010. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peakDummy receptacle. Product standard
BS EN 2997-012:2009. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire- resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peakJam-nut for jam-nut receptacles. Product standard
BS EN 2997-013:2009. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire- resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peakO-ring seal for jam-nut receptacles. Product standard
BS EN 2997-014:2011. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peakSquare flange receptacle with integrated accessory. Product standard
BS EN 2997-015:2011. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peakJam-nut mounted receptacle with integrated accessory. Product standard
BS EN 2997-016:2010. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peakPlug with integrated accessory. Product standard
BS EN 2997-1:1997. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peakTechnical specification
BS EN 2997-10:1997. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peakProtective cover for plug. Product standard
BS EN 2997-11:1997. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peakDummy receptacle. Product standard
BS EN 2997-2:1997. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peakSpecification of performance and contact arrangements
BS EN 2997-3:1997. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peakSquare flange receptacle. Product standard
BS EN 2997-4:1997. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peakJam-nut mounted receptacle. Product standard
BS EN 2997-5:1997. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peakHermetic square flange receptacle. Product standard
BS EN 2997-6:1997. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peakHermetic jam-nut mounted receptacle. Product standard
BS EN 2997-7:1997. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peakHermetic receptacle with round flange attached by soldering or brazing. Product standard
BS EN 2997-8:1997. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peakPlug. Product standard
BS EN 2997-9:1997. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peakProtective cover for receptacle. Product standard
BS EN 2998:1996. Washers, flat, in heat resisting steel, passivated
BS EN 29992-1:1993. Financial transaction cards. Messages between the integrated circuit card and the card accepting deviceConcepts and structures
BS EN 29999:1994, ISO 9999:1992. Technical aids for disabled persons. Classification
BS EN 300:1997. Oriented strand boards (OSB). Definitions, classification and specifications
BS EN 300:2006. Oriented strand boards (OSB). Definitions, classification and specifications
BS EN 30011-1:1993, ISO 10011-1:1990. Guidelines for auditing quality systemsGuidelines for auditing quality systems. Auditing
BS EN 30011-2:1993, ISO 10011-2:1991. Guidelines for auditing quality systemsGuidelines for auditing quality systems. Qualification criteria for quality systems auditors
BS EN 30011-3:1993, ISO 10011-3:1991. Guidelines for auditing quality systemsGuidelines for auditing quality systems. Management of audit programmes
BS EN 30012-1:1994, BS 5781-1:1992,ISO 10012-1:1992. Quality assurance requirements for measuring equipment.Metrological confirmation system for measuring equipment
BS EN 3004:1997. Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286). Classification: 1100 MPa (at ambient temperature)/650°C. Technical specification
BS EN 30042:1994, ISO 10042:1992. Arc-welded joints in aluminium and its weldable alloys. Guidance on quality levels for imperfections
BS EN 3005:2004. Aerospace series. Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated. Classification: 1210 MPa (at ambient temperature) / 730°C. Technical specification
BS EN 3006:1994. Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperature)/650°C
BS EN 3007:1996. Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 900 MPa (at ambient temperature)/650°C
BS EN 3008:1998. Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classification:1275 MPa (at ambient temperature)/650°C
BS EN 3009:1998. Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated. Classification. 1275 MPa (at ambient temperature)/650°C
BS EN 301:1992. Adhesives, phenolic and aminoplastic, for load-bearing timber structures: classification and performance requirements
BS EN 301:2006. Adhesives, phenolic and aminoplastic, for loading bearing timber structures. Classification and performance requirements
BS EN 301:2013. Adhesives, phenolic and aminoplastic, for load-bearing timber structures. Classification and performance requirements
BS EN 3010:1998. Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 MPa (at ambient temperature)/730°C
BS EN 30-1-1:1998
BS EN 3011:1998. Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. Classification:1210 MPa (at ambient temperature)/730 °C
BS EN 30-1-1:1998. Domestic cooking appliances burning gasSafety. General
BS EN 30-1-1:2008+A3:2013. Domestic cooking appliances burning gasSafety. General
BS EN 3012:1996. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 MPa (at ambient temperature)/730°C
BS EN 30-1-2:1999. Domestic cooking appliances burning gas. SafetyAppliances having forced-convection ovens and/or grills
BS EN 30-1-2:2012. Domestic cooking appliances burning gas. SafetyAppliances having forced-convection ovens and/or grills
BS EN 3013:1996. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. Classification: 1210 MPa (at ambient temperature)/730°C
BS EN 30-1-3:2003. Domestic cooking appliances burning gas. SafetyAppliances having a glass ceramic hotplate
BS EN 30139-1:1994, BS 7589-1:1992,ISO 10139-1:1991. Dentistry. Resilient lining materials for removable denturesSpecification for short-term materials
BS EN 3014:2001. Aerospace series. Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286). Classification: 1100 MPa (at ambient temperature)/650°C
BS EN 30-1-4:2002. Domestic cooking appliances burning gasSafety. Appliances having one or more burners with an automatic burner control system
BS EN 30-1-4:2012. Domestic cooking appliances burning gas. SafetyAppliances having one or more burners with an automatic burner control system
BS EN 3015:2001. Aerospace series. Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated. Classification: 1100 MPa (at ambient temperature)/650°C
BS EN 3016:2008. Aerospace series. Washers countersunk, load spreading. Heat resisting steel
BS EN 3017:2008. Aerospace series. Washers, facing/packing. Heat resisting steel
BS EN 3019:2008. Aerospace series. Self-locking plate nuts, floating, two-lug, in heat resisting steel FE-PA92HT (A286). Classification: 1100 MPa (at ambient temperature)/650 °C
BS EN 3020:2008. Aerospace series. Self-locking plate nuts, floating, two-lug, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 1100 MPa (at ambient temperature)/650 °C
BS EN 30202-1:1993, ISO 10202-1:1991. Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cardsCard life cycle
BS EN 302-1:1992. Adhesives for load-bearing timber structures: test methodsDetermination of bond strength in longitudinal tensile shear
BS EN 30-2-1:1998. Domestic cooking appliances burning gasRational use of energy. General
BS EN 302-1:2004. Adhesives for load bearing timber structures. Test methodsDetermination of bond strength in longitudinal tensile shear strength
BS EN 302-1:2013. Adhesives for load-bearing timber structures. Test methodsDetermination of longitudinal tensile shear strength
BS EN 302-2:1992. Adhesives for load-bearing timber structures: test methodsDetermination of resistance to delamination (Laboratory method)
BS EN 30-2-2:1999. Domestic cooking appliances burning gas. Rational use of energyAppliances having forced-convection ovens and/or grills
BS EN 302-2:2004. Adhesives for load-bearing timber structures. Test methodsDetermination of resistance to delamination
BS EN 302-2:2013. Adhesives for load-bearing timber structures. Test methodsDetermination of resistance to delamination
BS EN 302-3:1992. Adhesives for load-bearing timber structures: test methodsDetermination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
BS EN 302-3:2004. Adhesives for load-bearing timber structures. Test methodsDetermination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
BS EN 302-3:2013. Adhesives for load-bearing timber structures. Test methodsDetermination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
BS EN 302-4:1992. Adhesives for load-bearing timber structures: test methodsDetermination of the effects of wood shrinkage on the shear strength
BS EN 302-4:2004. Adhesives for load-bearing timber structures. Test methodsDetermination of the effects of wood shrinkage on the shear strength
BS EN 302-4:2013. Adhesives for load-bearing timber structures. Test methodsDetermination of the effects of wood shrinkage on the shear strength
BS EN 302-5:2013. Adhesives for load-bearing structuresDetermination of maximum assembly time under referenced conditions
BS EN 3026:1994. Test method for dry film lubricants. Corrosion test on steel specimens
BS EN 302-6:2004. Adhesives for load-bearing timber structures. Test methodsDetermination of the conventional pressing time.
BS EN 302-6:2013. Adhesives for load-bearing timber structures. Test methodsDetermination of the minimum pressing time under referenced conditions
BS EN 3027:1994. Test method for dry film lubricants. Salt spray test
BS EN 302-7:2004. Adhesives for load-bearing timber structures. Test methodsDetermination of the conventional working life
BS EN 302-7:2013. Adhesives for load-bearing timber structures. Test methodsDetermination of the working life under referenced conditions
BS EN 3030:1994. Test method for dry film lubricants. Solids content
BS EN 303-1:1992. Heating boilers. Heating boilers with forced draught burnersTerminology, general requirements, testing and marking
BS EN 303-1:1999. Heating boilersHeating boilers with forced draught burners. Terminology, general requirements, testing and marking
BS EN 303-2:1992. Heating boilers. Heating boilers with forced draught burnersSpecial requirements for boilers with atomizing oil burners
BS EN 3032:1994. Test method for dry film lubricants. Thickness measurement
BS EN 303-2:1999. Heating boilersHeating boilers with forced draught burners. Special requirements for boilers with atomizing oil burners
BS EN 30320:1993, ISO 10320:1991. Geotextiles. Identification on site
BS EN 30326-1:1994+A2:2011, ISO 10326-1:1992. Mechanical vibration. Laboratory method for evaluating vehicle seat vibrationBasic requirements
BS EN 303-3:1999. Heating boilersGas-fired central heating boilers. Assembly comprising a boiler body and a forced draught burner
BS EN 3033:2008. Aerospace series. Nuts, self-locking, hexagonal with captive washer, in heat resisting steel FE-PA2601 (A286), uncoated. Classification: 1100 MPa/425°C
BS EN 303-4:1999. Heating boilers. Heating boilers with forced draught burnersHeating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar. Terminology, special requirements, testing and marking
BS EN 3034:2009. Aerospace series. Nuts, self-locking, hexagonal with captive washer. In heat resisting steel FE-PA92HT (A286), silver coated. Classification: 1100 MPa/425 °C
BS EN 3035:1997. Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C
BS EN 303-5:1999. Heating boilers. Heating boilers with forced draught burnersHeating boilers for solid fuels, hand and automatically fired, nominal heat output of up to 300 kW. Terminology, requirements, testing and marking
BS EN 303-5:2012. Heating boilersHeating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking
BS EN 303-6:2000. Heating boilers. Heating boilers with forced draught burnersSpecific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW
BS EN 303-7:2006. Heating boilersGas-fired central heating boilers equipped with a forced draught burner of nominal heat output not exceeding 1000 kW
BS EN 3038:1997. Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature)/425°C
BS EN 304:1992. Heating boilers. Test code for heating boilers for atomizing oil burners
BS EN 3042:1992. Quality assurance. EN aerospace products. Qualification procedure
BS EN 3043:2008. Aerospace series. Fasteners, externally threaded, in heat resisting steel FE PA92HT (A286). Classification: 900 MPa/650 °C, manufacturing method optional. Technical specification
BS EN 3044:1998. Installation holes for inserts, screw thread, helical coil, self-locking. Design standard
BS EN 3045:1994. Bearings, airframe rolling. Rigid single row ball bearings in steel. Diameter series 0 and 2. Reduced clearance category. Dimensions and loads
BS EN 3046:1994. Bearings, airframe rolling. Rigid single row ball bearings in steel, cadmium plated. Diameter series 0 and 2. Reduced clearance category. Dimensions and loads
BS EN 3047:1994. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 0 and 2. Reduced clearance category. Dimensions and loads
BS EN 3048:1992. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Light series. Elevated loads at ambient temperature. Dimensions and loads
BS EN 3048:2001. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Light series. Elevated load at ambient temperature. Dimensions and loads
BS EN 3049:1998. O-rings, in fluorocarbon rubber (FKM), low compression set. Hardness 80 IRHD
BS EN 305:1997. Heat exchangers. Definitions of performance of heat exchangers and the general test procedure for establishing performance of all heat exchangers
BS EN 3050:1998. O-rings, in fluorocarbon rubber (FKM), low compression set. Technical specification
BS EN 3052:1994. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature)/425°C
BS EN 3052:2009. Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature) / 425 °C
BS EN 3053:1994. Bearings, airframe rolling. Single row self-aligning roller bearings in steel. Dimensions and loads
BS EN 3054:1994. Bearings, airframe rolling. Single row self-aligning roller bearings in steel, cadmium plated. Dimensions and loads
BS EN 3055:1994. Bearings, airframe rolling. Single row self-aligning roller bearings in corrosion resisting steel. Dimensions and loads
BS EN 3056:1994. Bearings, airframe rolling. Rigid double row ball bearings in steel. Dimensions and loads
BS EN 3057:1994. Bearings, airframe rolling. Rigid double row ball bearings in steel, cadmium plated. Dimensions and loads
BS EN 3058:1994. Bearings, airframe rolling. Rigid double row ball bearings in corrosion resisting steel. Dimensions and loads
BS EN 3059:2007. Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in steel with flanged alignment housing, cadmium plated. Dimensions and loads
BS EN 306:1997. Heat exchangers. Methods of measuring the parameters necessary for establishing the performance
BS EN 3060:2007. Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in steel, cadmium plated, with flanged alignment housing, cadmium plated. Dimensions and loads
BS EN 3061:2007. Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel, with flanged alignment housing. Dimensions and loads
BS EN 3063:1994. Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 MPa (at ambient temperature)/730°C
BS EN 3064:1996. Shank nuts, self-locking, serrated. Installation procedure
BS EN 3065:1996. Installation holes for self-locking, serrated shank nuts. Design standard
BS EN 307:1999. Heat exchangers. Guidelines for preparing installation, operating and maintenance instructions required to maintain the performance of each type of heat exchanger
BS EN 3079:2006. Pipe coupling 8°30' up to 28000 kPa. Adaptors. Metric series. Technical specification
BS EN 308:1997. Heat exchangers. Test procedures for establishing the performance of air to air and flue gases heat recovery devices
BS EN 3080:2006. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, reduced, branch with thrust wire nut
BS EN 3081:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Ferrules welded, with dynamic beam seal end, for repair
BS EN 3082:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, bulkhead welded, for repair
BS EN 3083:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, bulkhead, long welded end, for repair
BS EN 3084:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, welded end threaded for repair
BS EN 309:1992. Wood particleboards. Definition and classification
BS EN 309:2005. Particleboards. Definition and classification
BS EN 30993-1:1994, ISO 10993-1:1992. Biological evaluation of medical devicesGuidance on selection of tests
BS EN 30993-3:1994, ISO 10993-3:1992. Biological evaluation of medical devicesTests for genotoxicity, carcinogenicity and reproductive toxicity
BS EN 30993-4:1994, ISO 10993-4:1992. Biological evaluation of medical devicesSelection of tests for interactions with blood
BS EN 30993-5:1994, ISO 10993-5:1992. Biological evaluation of medical devicesTests for cytotoxicity, in vitro methods
BS EN 30993-6:1995, ISO 10993-6:1994. Biological evaluation of medical devicesTests for local effects after implantation
BS EN 3-1:1996. Portable fire extinguishersDescription, duration of operation, class A and B fire test
BS EN 31:1999. Pedestal wash basins. Connecting dimensions
BS EN 31:2011. Wash basins. Connecting dimensions
BS EN 310:1993. Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
BS EN 3-10:2009. Portable fire extinguishersProvisions for evaluating the conformity of a portable fire extinguisher to EN 3-7
BS EN 31010:2010. Risk management. Risk assessment techniques
BS EN 3102:2013. Aerospace series. Sealants. Test methods. Determination of low-temperature flexibility
BS EN 31092:1993+A1:2012, ISO 11092:1993. Textiles. Physiological effects. Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
BS EN 311:1992. Particleboards. Surface soundness of particleboards, test method
BS EN 311:2002. Wood-based panels. Surface soundness. Test method
BS EN 3112:1995. Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235°C
BS EN 3114-001:2006. Aerospace series. Test method. Microstructure of (α + β) titanium alloy wrought productsGeneral requirements
BS EN 3114-002:2007. Aerospace series. Test method. Microstructure of (α + β) titanium alloy wrought productsMicrostructure of bars, sections, forging stock and forgings
BS EN 3114-003:2006. Aerospace series. Test method. Microstructure of (α + β) titanium alloy wrought productsMicrostructure of plate
BS EN 3114-004:2006. Aerospace series. Test method. Microstructure of (α + β) titanium alloy wrought productsMicrostructure of sheet for superplastic forming
BS EN 3115:2009. Aerospace series. Aluminium alloy 7050-T73. Wire for solid rivets. D ≤ 10 mm
BS EN 312:2003. Particleboards. Specifications
BS EN 312:2010. Particleboards. Specifications
BS EN 3120:2012. Aerospace series. Titanium alloy TI-P64003. Cold worked and stress relieved. Seamless tube for pressure systems. 4 mm ≤ D ≤ 51 mm. 690 MPa ≤ Rm ≤ 1 030 MPa
BS EN 312-1:1997. Particleboards. SpecificationsParticleboards. Specifications. General requirements for all board types
BS EN 312-2:1997. Particleboards. SpecificationsRequirements for general purpose boards for use in dry conditions
BS EN 312-3:1997. Particleboards. SpecificationsRequirements for boards for interior fitments (including furniture) for use in dry conditions
BS EN 312-4:1997. Particleboards. SpecificationsRequirements for load-bearing boards for use in dry conditions
BS EN 312-5:1997. Particleboards. SpecificationsRequirements for load-bearing boards for use in humid conditions
BS EN 31252:1996, ISO 11252:1993. Lasers and laser related equipment. Laser device. Minimum requirements for documentation
BS EN 31253:1996, ISO 11253. Lasers and laser-related equipment. Laser device. Mechanical interfaces
BS EN 312-6:1997. Particleboards. SpecificationsRequirements for heavy duty load-bearing boards for use in dry conditions
BS EN 312-7:1997. Particleboards. SpecificationsRequirements for heavy-duty load-bearing boards for use in humid conditions
BS EN 313-1:1992. Plywood. Classification and terminologyClassification
BS EN 313-1:1996. Plywood. Classification and terminologyPlywood. Classification and terminology. Classification
BS EN 313-2:1995. Plywood. Classification and terminologyTerminology
BS EN 313-2:2000. Plywood. Classification and terminologyTerminology
BS EN 3135:1996. Rivets, solid, universal head, in corrosion resisting steel FE-PA11, passivated, inch based series
BS EN 3136:1996. Rivets, solid, universal head, in corrosion resisting steel FE-PA92HT, passivated, inch based series
BS EN 3138:2001. Aerospace series. Rivets, solid 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series
BS EN 3139:2001. Aerospace series. Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series
BS EN 3140:2001. Aerospace series. Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series
BS EN 314-1:1993. Plywood. Bonding qualityTest methods
BS EN 3141:1996. Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, cadmium plated, inch based series
BS EN 314-1:2004. Plywood. Bonding qualityTest methods
BS EN 314-2:1993. Plywood. Bonding qualityRequirements
BS EN 3142:1996. Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, inch based series
BS EN 31426:1994, ISO 11426:1993. Determination of gold in gold jewellery alloys. Cupellation method (fire assay)
BS EN 31427:1994, ISO 11427:1993. Determination of silver in silver jewellery alloys. Volumetric (potentiometric) method using potassium bromide
BS EN 3145:2002. Round bars, hot rolled in steel. Normal tolerances. Diameter 6 mm ≤ D ≤ 250 mm. Dimensions
BS EN 3146:2001. Aerospace series. Round bars, hot rolled in steel. Close tolerances. Diameter 6mm ≤ D ≤ 250mm. Dimensions
BS EN 3148:2008. Aerospace series. Shank nuts, self-locking, flange restrained. Installation procedure
BS EN 3149:1997. Shank nuts. Installation holes, 60° swage, flanges. Design standard
BS EN 315:1993. Plywood. Tolerances for dimensions
BS EN 315:2000. Plywood. Tolerances for dimensions
BS EN 3150:1995. Pins, shoulder, headless, in heat resisting nickel base alloy NI-P100HT (Inconel 718)
BS EN 3151:1995. Dowels, plain, in heat resisting nickel base alloy NI-P100HT (Inconel 718)
BS EN 3152:2004. Aerospace series. Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated or uncoated. Classification: 1100 MPa (at ambient temperature)/425°C. Technical specification
BS EN 3155-001:2009. Aerospace series. Electrical contacts used in elements of connectionTechnical specification
BS EN 3155-002:2006. Aerospace series. Electrical contacts used in elements of connectionList and utilization of contacts
BS EN 3155-002:2011. Aerospace series. Electrical contacts used in elements of connectionList and utilization of contacts
BS EN 3155-003:2005. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, female, type A, crimp, class S. Product standard
BS EN 3155-004:2007. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, male, type A, crimp, class T. Product standard
BS EN 3155-005:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, female, type A, crimp, class T. Product standard
BS EN 3155-008:2005. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, male, type A, crimp, class S. Product standard
BS EN 3155-009:2006. Electrical contacts used in elements of connectionContacts, electrical, female, type A, crimp, class S. Product standard
BS EN 3155-009:2009. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, female, type A, crimp, class S. Product standard
BS EN 3155-012:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, triaxial, size 8, male, type D, solder, class R. Product standard
BS EN 3155-013:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, triaxial, size 8, female, type D, solder, class R. Product standard
BS EN 3155-014:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, male, type A, crimp, class S. Product standard
BS EN 3155-015:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, female, type A, crimp, class S. Product standard
BS EN 3155-016:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, male, type A, crimp, class S. Product standard
BS EN 3155-017:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, relay base, female, type A, crimp, class P. Product standard
BS EN 3155-018:2005. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, male, type A, crimp, class S. Product standard
BS EN 3155-019:2005. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, female, type A, crimp, class S. Product standard
BS EN 3155-022:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, rectangular, male, type A, crimp, class R. Product standard
BS EN 3155-023:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, rectangular, female, type A, crimp, class R. Product standard
BS EN 3155-024:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, triaxial, size 8, male, type D, crimp, class S. Product standard
BS EN 3155-025:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, triaxial, size 8, female, type D, crimp, class S. Product standard
BS EN 3155-026:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, male, type A, crimp, class R. Product standard
BS EN 3155-026:2010. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, male, type A, crimp, class R. Product standard
BS EN 3155-027:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, female, type A, crimp, class R. Product standard
BS EN 3155-028:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, coaxial, shielded, size 16, male, type D, crimp, class R. Product standard
BS EN 3155-029:2007. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, coaxial, shielded, size 16, female, type D, crimp, class R. Product standard
BS EN 3155-030:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, coaxial, shielded, size 12, male, type D, crimp, class R. Product standard
BS EN 3155-031:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, coaxial, shielded, size 12, female, type D, crimp, class R. Product standard
BS EN 3155-032:2009. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, coaxial, 50 ohms, size 5, male, type D, crimp, class R. Product standard
BS EN 3155-033:2009. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical,coaxial, 50 ohms, size 5, female, type D, crimp, class R. Product Standard
BS EN 3155-034:2007. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, triaxial, size 08, male, type D, crimp, class R. Product standard
BS EN 3155-035:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, triaxial, size 08, female, type D, crimp, class R. Product standard
BS EN 3155-035:2012. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, triaxial, size 08, female, type D, crimp, class R. Product standard
BS EN 3155-039:2007. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, coaxial, size 16, female, type D, solder, class R. Product standard
BS EN 3155-040:2007. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, coaxial, size 12, male, type D, solder, class R. Product standard
BS EN 3155-041:2007. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, coaxial, size 12, female, type D, solder, class R. Product standard
BS EN 3155-042:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, triaxial, size 08, male 042, type D, solder, class P. Product standard
BS EN 3155-043:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, triaxial, size 08, female 043, type D, solder, class P. Product standard
BS EN 3155-044:2007. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, male 044, type A, double crimping, class T. Product standard
BS EN 3155-045:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, female, type A, double crimping, class T. Product standard
BS EN 3155-046:2007. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, male, type A, double crimping, class S. Product Standard
BS EN 3155-047:2007. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, female, type A, double crimping, class S. Product standard
BS EN 3155-052:2007. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, male 052, type A, crimp, class S. Product standard
BS EN 3155-053:2007. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, female 053, type A, crimp, class S. Product standard
BS EN 3155-054:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, male thermocouple NiAl, type C, crimp, class T. Product standard
BS EN 3155-055:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, female, thermocouple NiAl, type C, crimp, class T. Product standard
BS EN 3155-056:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, male, thermocouple NiCr, type C, crimp, class T. Product standard
BS EN 3155-057:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, female, thermocouple NiCr, type C, crimp, class T. Product standard
BS EN 3155-058:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, coaxial, size 16, male, type D, solder, class R. Product standard
BS EN 3155-059:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, coaxial, size 16, female, type D, solder, class R. Product standard
BS EN 3155-060:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, coaxial, shielded, size 12, male, type D, solder, class R. Product standard
BS EN 3155-061:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, coaxial, shielded, size 12, female, type D, solder, class R. Product standard
BS EN 3155-063:2009. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, coaxial, 50 ohms size 1, male, type D, solder, class R. Product standard
BS EN 3155-064:2009. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, coaxial, 50 ohms size 1, female, type D, solder, class R. Product standard
BS EN 3155-065:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, male, type A, crimp, class S, size 8. Product standard
BS EN 3155-066:2006. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, female, type A, crimp, class S, size 8. Product standard
BS EN 3155-067:2009. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, coaxial, size 08, male, type D, solder, class R. Product standard
BS EN 3155-068:2009. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, coaxial, size 08, female, type D, solder, class R. Product standard
BS EN 3155-069:2009. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, coaxial, size 16, female, type D, solder, class P. Product standard
BS EN 3155-070:2007. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, male, type A, crimp, class S. Product standard
BS EN 3155-071:2007. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, female, type A, crimp, class S. Product standard
BS EN 3155-074:2009. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, quadrax, size 8, male, type E, crimp, class R. Product standard
BS EN 3155-075:2009. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, quadrax, size 08, female, type E, crimp, class R. Product standard
BS EN 3155-076:2012. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, male, type A, crimp, class R. Product standard
BS EN 3155-077:2012. Aerospace series. Electrical contacts used in elements of connectionContacts, electrical, female, type A, crimp, class R. Product standard
BS EN 316:1993. Wood fibreboards. Definition, classification and symbols
BS EN 316:1999. Wood fibreboards. Definition, classification and symbols
BS EN 316:2009. Wood fibre boards. Definition, classification and symbols
BS EN 3160:2007. Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 1310 MPa
BS EN 3161:2007. Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 930 MPa
BS EN 3162:2007. Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, sheet and strip a ≤ 6 mm, Rm ≥ 930 MPa
BS EN 3163:2007. Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, softened, forging stock a or D ≤ 300 mm
BS EN 317:1993. Particleboards and fibreboards. Determination of swelling in thickness after immersion in water
BS EN 318:1993. Fibreboards. Determination of dimensional changes associated with changes in relative humidity
BS EN 318:2002. Wood based panels. Determination of dimensional changes associated with changes in relative humidity
BS EN 3182:2012. Aerospace series. Ball bearings, rigid in corrosion resisting steel cadmium plated, for control cable pulleys. Dimensions and loads
BS EN 319:1993. Particleboards and fibreboards. Determination of tensile strength perpendicular to the plane of the board
BS EN 3196:1994. Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 1100 MPa (at ambient temperature)/425°C
BS EN 3197:2010. Aerospace series. Design and installation of aircraft electrical and optical interconnection systems
BS EN 3-2:1996. Portable fire extinguishersTightness, dielectric test, tamping test, special provisions
BS EN 32:1999. Wall-hung wash basins. Connecting dimensions
BS EN 320:1993. Fibreboards. Determination of resistance to axial withdrawal of screws
BS EN 320:2011. Particleboards and fibreboards. Determination of resistance to axial withdrawal of screws
BS EN 3201:2008. Aerospace series. Holes for metric threaded fasteners. Design standard
BS EN 3202:1995. Holes and traps for T-head bolts. Design standard
BS EN 3207:1998. Rubber compounds. Technical specification
BS EN 321:1993. Fibreboards. Cyclic tests in humid conditions
BS EN 321:2002. Wood-based panels. Determination of moisture resistance under cyclic test conditions
BS EN 3212:1995. Paints and varnishes. Corrosion test by alternate immersion in a buffered sodium chloride solution
BS EN 3218-001:2006. Aerospace series. Connectors, rectangular, with metallic shells and screw-lockingTechnical specification
BS EN 3218-002:2006. Aerospace series. Connectors, rectangular, with metallic shells and screw-lockingSpecification of performance and contact arrangements
BS EN 3218-005:2006. Aerospace series. Connectors, rectangular, with metallic shells and screw-lockingPlug with non-removable size 22 solder contacts. Product standard
BS EN 3218-006:2006. Aerospace series. Connectors, rectangular, with metallic shells and screw-lockingReceptacle with non-removable size 22 solder contacts. Product standard
BS EN 3218-007:2006. Aerospace series. Connectors, rectangular, with metallic shells and screw-lockingPlug with rear-removable size 20 crimp contacts. Product standard
BS EN 3218-008:2006. Aerospace series. Connectors, rectangular, with metallic shells and screw-lockingReceptacle with rear-removable size 20 crimp contacts. Product standard
BS EN 3218-009:2006. Aerospace series. Connectors, rectangular, with metallic shells and screw-lockingProtective covers for EN 3218-005 and EN 3218-007 connectors. Product standard
BS EN 3218-010:2006. Aerospace series. Connectors, rectangular, with metallic shells and screw-lockingProtective covers for EN 3218-006 and EN 3218-008 connectors. Product standard
BS EN 3218-011:2006. Aerospace series. Connectors, rectangular, with metallic shells and screw-lockingTool, insert extraction for EN 3218-005 to EN 3218-008 connectors. Product standard
BS EN 322:1993. Wood-based panels. Determination of moisture content
BS EN 3226:2009. Aerospace series. Nuts, hexagon, plain, normal height, normal across flats, steel, cadmium plated. Classification: 1100 MPa/235°C
BS EN 3227:2010. Aerospace series. Nuts, hexagonal, plain, normal height, normal across flats, in steel, cadmium plated, left hand thread. Classification: 1100 MPa (at ambient temperature)/235°C
BS EN 3228:2010. Aerospace series. Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235°C
BS EN 3229:2009. Aerospace series. Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated, left hand thread. Classification: 900 MPa (at ambient temperature)/235°C
BS EN 323:1993. Wood-based panels. Determination of density
BS EN 3230:2001. Aerospace series. Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated. Classificaiton: 900 MPa (at ambient temperature)/235°C
BS EN 3236:1998. Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread
BS EN 3237:1998. Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread
BS EN 3238:2010. Aerospace series. Metallic materials. Test method. Shear test for wires and rivets
BS EN 3239:1996. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread. Classification: 1210 MPa (at ambient temperature)/730°C
BS EN 3240:2007. Aerospace series. Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), uncoated. Classification: 1100 MPa (at ambient temperature)/425°C
BS EN 324-1:1993. Wood-based panels. Determination of dimensions of boardsDetermination of thickness, width and length
BS EN 3241:2008. Aerospace series. Nuts, self-locking, clip, in heat resisting steel FE-P A 92 HT (A 286), silver coated. Classification: 1100 MPa (at ambient temperature) / 425 °C
BS EN 324-2:1993. Wood-based panels. Determination of dimensions of boardsDetermination of squareness and edge straightness
BS EN 3243:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Ferrule, welded, with dynamic beam seal end
BS EN 3244:2001. Aerospace Series. Pipe coupling 8°30' in titanium alloy. Unions, double ended
BS EN 3245:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, reducer
BS EN 3246:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, bulkhead
BS EN 3247:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, bulkhead welded end
BS EN 3248:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Adaptors, reduced pipe end, with lockring
BS EN 325:1993. Wood-based panels. Determination of dimensions of test pieces
BS EN 325:2012. Wood-based panels. Determination of dimensions of test pieces
BS EN 326-1:1994. Wood-based panels. Sampling, cutting and inspectionSampling and cutting of test pieces and expression of test results
BS EN 326-2:2000. Wood-based panels. Sampling, cutting and inspectionQuality control in the factory
BS EN 326-2:2010. Wood-based panels. Sampling, cutting and inspectionInitial type testing and factory production control
BS EN 326-3:1998. Wood-based panels. Sampling, cutting and inspectionInspection of a consignment of panels
BS EN 3264:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Thrust wire nut
BS EN 3264:2010. Aerospace series. Pipe coupling 8°30' in titanium alloy. Thrust wire nuts
BS EN 3266:2001. Aerospace series. Pipe coupling in titanium alloy. Bulkhead nut
BS EN 3267:2001. Aerospace series. Washers, bulkhead in titanium alloy
BS EN 3268:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Pressure plug
BS EN 3269:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Ferrules, blind, with dynamic beam seal end
BS EN 327:2000. Heat exchangers. Forced convection air cooled refrigerant condensers. Test procedure for establishing performance
BS EN 3270:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Blanking plug with lockring
BS EN 3272:2001. Aerospace series. Pipe coupling 8°30'. Dynamic beam seal end for ferrule, welded. Geometric configuration
BS EN 3273:2001. Aerospace series. Pipe coupling 8°30'. Dynamic beam seal end for elbows, tees and crosses. Geometric configuration
BS EN 3274:2001. Aerospace series. Pipe coupling 8°30'. Thread. Geometric configurations
BS EN 3274:2010. Aerospace series. Pipe coupling 8°30'. Thread end. Geometric configuration
BS EN 3275:2002. Aerospace series. Pipe coupling 8°30' up to 28000 kPa. Dynamic beam seal. Metric series. Technical specification
BS EN 3278:2012. Aerospace series. Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
BS EN 328:1999. Heat exchangers. Test procedures for establishing the performance of forced convection unit air coolers for refrigeration
BS EN 3280:1994. Bearings, airframe rolling, rigid or self-aligning. Technical specification
BS EN 3280:2011. Aerospace series. Bearings, airframe rolling, rigid or self-aligning. Technical specification
BS EN 3281:1994. Bearings, airframe rolling. Rigid single row ball bearings in steel. Diameter series 8 and 9. Dimensions and loads
BS EN 3282:1994. Bearings, airframe rolling. Rigid single row ball bearings in steel, cadmium plated. Diameter series 8 and 9. Dimensions and loads
BS EN 3283:1994. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 8 and 9. Dimensions and loads
BS EN 3284:1994. Bearings, airframe rolling. Rigid single row ball bearings in steel. Diameter series 0 and 2. Normal clearance category. Dimensions and loads
BS EN 3285:1994. Bearings; airframe rolling. Rigid single row ball bearings in steel, cadmium plated. Diameter series 0 and 2. Normal clearance category. Dimensions and loads
BS EN 3286:1994. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 0 and 2. Normal clearance category. Dimensions and loads
BS EN 3287:1994. Bearings, airframe rolling. Double row self-aligning ball bearings in steel. Diameter series 2. Dimensions and loads
BS EN 3288:1994. Bearings, airframe rolling. Double row self-aligning ball bearings in steel, cadmium plated. Diameter series 2. Dimensions and loads
BS EN 3289:1994. Bearings, airframe rolling. Double row self-aligning ball bearings in corrosion resisting steel. Diameter series 2. Dimensions and loads
BS EN 329:1997. Sanitary tapware. Waste fittings for shower trays. General technical specifications
BS EN 3290:1994. Bearings, airframe rolling. Single row self-aligning roller bearings in steel. Diameter series 3 and 4. Dimensions and loads
BS EN 3291:1994. Bearings, airframe rolling. Single row self-aligning roller bearings in steel, cadmium plated. Diameter series 3 and 4. Dimensions and loads
BS EN 3292:1994. Bearings, airframe rolling. Single row self-aligning roller bearings in corrosion resisting steel. Diameter series 3 and 4. Dimensions and loads
BS EN 3293:2008. Aerospace series. Bolts, T-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated. Classification: 1275 MPa/650°C
BS EN 3294:2008. Aerospace series. Bolts, T-head, close tolerance, in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts. Classification: 1210 MPa/730°C
BS EN 3297:1998. Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Technical specification
BS EN 3298:1998. Inserts, thin wall, self-locking. Installation and removal procedure
BS EN 3298:2008. Aerospace series. Inserts, thin wall, self-locking. Installation and removal procedure
BS EN 3299:2007. Aerospace series. Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated. Technical specification
BS EN 3-3:1996. Portable fire extinguishersConstruction, resistance to pressure, mechanical tests
BS EN 33:1999. Pedestal W.C. pans with close-coupled flushing cistern. Connecting dimensions
BS EN 33:2003. Pedestal W.C. pans with close-coupled flushing cistern. Connecting dimensions
BS EN 33:2011. WC pans and WC suites. Connecting dimensions
BS EN 330:1993. Wood preservatives. Field test method for determining the relative protective effectiveness of a wood preservative for use under a coating and exposed out-of-ground contact. L-joint method
BS EN 3301:2007. Aerospace series. Bolts, T-head, close tolerance medium thread length in heat resisting steel FE-PM1708 (FV535), uncoated. Classification: 1000 MPa/550°C
BS EN 3302:2007. Aerospace series. Bolts in heat resisting steel FE-PM1708 (FV535). Classification: 1000 MPa/550°C. Technical specification
BS EN 3303:1997. Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C
BS EN 3305:1997
BS EN 3305:1997. Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C
BS EN 3306:1996
BS EN 331:1998+A1:2010. Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
BS EN 3310:2011. Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Not heat treated. Forging stock, for annealed forgings. De ≤ 360 mm
BS EN 3311:2009. Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bar for machining. D < 110 mm
BS EN 3312:2012. Aerospace series. Titanium alloy Ti-6Al-4V. Annealed. Forgings De ≤ 150 mm
BS EN 3323:2009. Aerospace series. Bolts with double hexagon head, relieved shank, long thread, in heat resisting steel FE-PM 38 (FV 535). Classification: 1000 MPa/550 °C
BS EN 3324:2007. Aerospace series. Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PM1708 (FV535). Classification: 1000 MPa/550°C. Unplated
BS EN 3325:2007. Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting steel, FE-PM1708 (FV535). Classification: 1000 MPa/550°C. Unplated
BS EN 3326:2007. Aerospace series. Bolts, D-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-PH2601 (INCO 718). Classification: 1275 MPa/650°C, unplated
BS EN 3327:2008. Aerospace series. Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated. Classification: 1275 MPa/650 °C
BS EN 3328:2008. Aerospace series. Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting steel FE-PM38 (FV535), uncoated. Classification: 1000 MPa/550 °C
BS EN 3329:2009. Aerospace series. Steel FE-PL1503 (35CrMo4). Annealed Sheet and strip. 0,3 mm ≤ a ≤ 2 mm. For prevailing torque nuts
BS EN 3330:2009. Aerospace series. Steel FE-PL1503 (35CrMo4). Annealed. Bar and wire. De ≤ 40 mm. For prevailing torque nuts
BS EN 3332:2005. Aerospace series. Aluminium alloy AL-P7475-T762. Clad sheet and strip. 1,0 mm ≤ a ≤ 6 mm
BS EN 3333:2005. Aluminium alloy AL-P7475-T762. Sheet and strip. 0,6 mm ≤ a ≤ 6 mm
BS EN 3335:2005. Aluminium alloy AL-P7475-O2. Sheet for superplastic forming (SPF). 0,8 mm ≤ a ≤ 6 mm
BS EN 3338:2005. Aerospace series. Aluminim alloy AL-P7050. T74511. Extruded bar and section. a or D ≤ 150 mm with peripheral coarse grain control
BS EN 3339:2006. Aerospace series. Aluminium alloy AL-P7010-T76. Die Forgings. a ≤ 200 mm
BS EN 334:1999. Gas pressure regulators for inlet pressures up to 100 bar
BS EN 334:2005+A1:2009. Gas pressure regulators for inlet pressures up to 100 bar
BS EN 3341:2005. Aluminium alloy AL-P6061-T4 or T42. Sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 3342:2005. Aerospace series. Aluminim alloy AL-P6061. T4 or T42. Drawn or extruded bar and section. a or D ≤ 150 mm
BS EN 3344:2005. Aerospace series. Aluminim alloy AL-P7050. T76511. Extruded bar and section. a or D $3l 150 mm with peripheral coarse grain control
BS EN 3347:2005. Aerospace series. Aluminim alloy AL-P2024. T8511. Extruded bar and section. a or D ≤ 150 mm with peripheral coarse grain control
BS EN 335:2013. Durability of wood and wood-based products. Use classes: definitions, application to solid wood and wood-based products
BS EN 335-1:1992. Hazard classes of wood and wood-based products against biological attackClassification of hazard classes
BS EN 335-1:2006. Durabiltity of wood and wood-based products. Definitions of use classesGeneral
BS EN 3351:2012. Aerospace series. Titanium alloy Ti-4Al-4Mo-2Sn. Solution treated and aged. Forgings. De ≤ 150 mm
BS EN 335-2:1992. Hazard classes of wood and wood-based products against biological attackGuide to the application of hazard classes to solid wood
BS EN 335-2:2006. Durability of wood and wood-based products. Definition of use classesApplication to solid wood
BS EN 335-3:1996. Hazard classes of wood and wood-based products against biological attackApplication to wood-based panels
BS EN 3354:2013. Aerospace series. Titanium alloy Ti-6Al-4V. Annealed. Sheet for superplastic forming. a ≤ 6 mm
BS EN 3355:2012. Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Extruded section. De ≤ 150 mm. 900 MPa ≤ Rm ≤ 1 160 MPa
BS EN 3359:2007. Aerospace series. Steel FE-PM1503 (X3CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm
BS EN 336:1995. Structural timber. Coniferous and poplar. Sizes. Permissible deviations
BS EN 336:2003. Structural timber. Sizes, permitted deviations
BS EN 336:2013. Structural timber. Sizes, permitted deviations
BS EN 3361:2007. Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted, solution treated and precipitation treated, sheet and strip a ≤ 6mm, 1070 MPa ≤ Rm ≤ 1220 MPa
BS EN 3364:2007. Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted, softened, forging stock a or D ≤ 300 mm
BS EN 3365:2007. Aerospace series. Steel FE-PM3901 (X15CrNi17-3). Air melted, softened, forging stock a or D ≤ 300 mm
BS EN 3368:2008. Aerospace series. Aerospace design standard. Holes for locating pins
BS EN 3372-001:2007. Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuousTechnical specification
BS EN 3372-002:2007. Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuousSpecification of performance and contact arrangement
BS EN 3372-003:2007. Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuousSquare flange receptacle. Product standard
BS EN 3372-005:2007. Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuousReceptacle, hermetic, round flange, solder mounting. Product standard
BS EN 3372-006:2007. Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuousProtective cover for receptacle. Product standard
BS EN 3372-007:2007. Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuousProtective cover for plug. Product standard
BS EN 3372-008:2007. Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuousFree plug with grounding spring. Product standard
BS EN 3372-009:2007. Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuousReceptacle, jam nut mounting. Product standard
BS EN 3372-011:2007. Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuousDummy receptacle. Product standard
BS EN 3373-001:2007. Aerospace series. Terminal lugs and in-line splices for crimping on electric conductorsTechnical specification
BS EN 3373-002:2009. Aerospace series. Terminal lugs and in-line splices for crimping on electrical conductorsGeneral and list of product standard
BS EN 3373-007:2012. Aerospace series. Terminal lugs and in-line splices for crimping on electric conductorsNickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs. Product standard
BS EN 3373-008:2012. Aerospace series. Terminal lugs and in-line splices for crimping on electric conductorsCopper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 °C. Product standard
BS EN 3373-010:2009. Aerospace series. Terminal lugs and in-line splices for crimping on electric conductorsTerminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 °C for metric and inch stud series. Product standard
BS EN 3373-011:2009. Aerospace series. Terminal lugs and in-line splices for crimping on electric conductorsTerminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 °C for metric and inch stud series. Product standard
BS EN 3373-012:2005. Aerospace series. Terminal lugs and in-line splices for crimping on electric conductorsIn-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 150°C. Product standard
BS EN 3373-013:2005. Aerospace series. Terminal lugs and in-line splices for crimping on electric conductorsIn-line splices, insulated and moisture resistant, for crimping on copper conductors, temperature up to 260°C. Product standard
BS EN 3373-014:2009. Aerospace series. Terminal lugs and in-line splices for crimping on electric conductorsIn-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200°C. Product standard
BS EN 3375-001:2007. Aerospace series. Cable, electrical, for digital data transmissionTechnical specification
BS EN 3375-002:2012. Aerospace series. Cable, electrical, for digital data transmissionGeneral
BS EN 3375-003:2007. Aerospace series. Cable, electrical, for digital data transmissionSingle braid. 77 Ohms. Type KG. Product standard
BS EN 3375-004:2007. Aerospace series. Cable, electrical, for digital data transmissionDouble braid. 77 Ohms. Type WJ. Product standard
BS EN 3375-005:2007. Aerospace series. Cable, electrical, for digital data transmissionDouble braid + metallic layer. 77 Ohms. Type WV. Product standard
BS EN 3375-006:2006. Aerospace series. Cable, electrical, for digital data transmissionSingle braid. 78 Ohms. Type XM. Product standard
BS EN 3375-007:2006. Aerospace series. Cable, electrical, for digital data transmissionDouble braid. 77 Ohms. Type WW. Product standard
BS EN 3375-008:2009. Aerospace series. Cable, electrical, for digital data transmissionSingle braid. Star Quad 100 Ohms. Type KD. Product standard
BS EN 3375-009:2009. Aerospace series. Cable, electrical, for digital data transmissionSingle braid. CAN Bus. 120 Ohms. Type WX. Product standard
BS EN 3377:1996. Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286). Classification: 1100 MPa (at ambient temperature)/425°C
BS EN 3379:1996. Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts. Classification: 1210 MPa (at ambient temperature)/730°C
BS EN 338:1995. Structural timber. Strength classes
BS EN 338:2003. Structural timber. Strength classes
BS EN 338:2009. Structural timber. Strength classes
BS EN 3380:1996. Rings, retaining. Technical specification
BS EN 3382:2012. Aerospace series. Rings retaining, internal, axial mounting, steel, phosphated
BS EN 3383:2012. Aerospace series. Rings retaining, internal, axial mounting,steel, vacuum cadmium plated
BS EN 3384:2012. Aerospace series. Rings retaining, external, axial mounting,steel, phosphated
BS EN 3385:2012. Aerospace series. Rings retaining, external, axial mounting, steel, vacuum cadmium plated
BS EN 3386:2012. Aerospace series. Rings retaining, radial mounting, steel, phosphated
BS EN 3388:2009. Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification 1275 MPa/650°C. Manufacturing method optional. Technical specification
BS EN 3389:2009. Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH1302 (Waspaloy). Classification: 1210 MPa/730°C. Manufacturing method optional. Technical specification
BS EN 3-4:1996. Portable fire extinguishersCharges, minimum required fire
BS EN 340:1993. Protective clothing. General requirements
BS EN 340:2003. Protective clothing. General requirements
BS EN 341:1993. Personal protective equipment against falls from a height. Descender devices
BS EN 341:2011. Personal fall protection equipment. Descender devices for rescue
BS EN 3417:2012. Aerospace series. Rivets, solid, universal head, in nickel base alloy NI-P11, metric series
BS EN 342:2004. Protective clothing. Ensembles and garments for protection against cold
BS EN 3425:2006. Aerospace series. Groove dimensions for axial mounting internal type retaining rings
BS EN 3426:2006. Aerospace series. Groove dimensions for axial mounting external type retaining rings
BS EN 3427:2006. Aerospace series. Groove dimensions for radial mounting retaining rings
BS EN 343:2003+A1:2007. Protective clothing. Protection against rain
BS EN 3431:2007. Aerospace series. Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, silver plated. Classification: 1100 MPa (at ambient temperature)/425°C
BS EN 3435:2010. Aerospace series. Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C
BS EN 344-1:1993. Safety, protective and occupational footwear for professional useRequirements and test methods
BS EN 344-2:1997. Safety, protective and occupational footwear for professional useAdditional requirements and test methods
BS EN 3444:2006. Aerospace series. Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated. Classification: 1250 MPa (at ambient temperature) / 650°C
BS EN 3446:1995. Bearings, precision ball without flange in corrosion resisting steel, for instruments and equipment. Dimensions and loads
BS EN 345-1:1993. Safety footwear for professional useSpecification
BS EN 345-2:1997. Safety footwear for professional useAdditional specifications
BS EN 3456:2009. Aerospace series. Titanium alloy TIP64001 (Ti-6Al-4V). Annealed. Sheet and strip, hot rolled. a 3L 6 mm
BS EN 3456:2012. Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Sheet and strip, hot rolled. a ≤ 6 mm
BS EN 3459:2010. Aerospace series. Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn). Solution treated and aged. Plate. 6 mm < a ≤ 50 mm
BS EN 346-1:1993. Protective footwear for professional useSpecification
BS EN 346-2:1997. Protective footwear for professional useAdditional specifications
BS EN 3464:2009. Aerospace series. Titanium alloy TI-P64001 (Ti-6AI-4V). Annealed. Plate. 6 mm < a ≤ 100 m
BS EN 3464:2012. Aerospace series. Titanium alloy (Ti-6Al-4V). Annealed. Plate. 6 mm < a ≤ 100 mm
BS EN 3469:2009. Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1310 MPa
BS EN 347-1:1993. Occupational footwear for professional useSpecification
BS EN 347-2:1997. Occupational footwear for professional useAdditional specifications
BS EN 3474:2005. Aerospace series. Aluminium alloy AL-P2024-T81. Sheet and strip. 0,25 mm $3l a ≤ 6 mm
BS EN 3475-100:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsGeneral
BS EN 3475-100:2010. Aerospace series. Cables, electrical, aircraft use. Test methodsGeneral
BS EN 3475-201:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsVisual examination
BS EN 3475-202:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsMass
BS EN 3475-203:2006. Aerospace series. Cables, electrical, aircraft use. Test methodsDimensions
BS EN 3475-301:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsOhmic resistance per unit length
BS EN 3475-302:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsVoltage proof test
BS EN 3475-302:2006. Aerospace series. Cable, electrical, aircraft use. Test methodsVoltage proof test
BS EN 3475-303:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsInsulation resistance
BS EN 3475-304:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsSurface resistance
BS EN 3475-305:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsOverload resistance
BS EN 3475-306:2005. Aerospace series. Cables, electrical, aircraft use. Test methodsContinuity of conductors
BS EN 3475-307:2005. Cables, electrical, aircraft use. Test methodsCorona extinction voltage
BS EN 3475-307:2010. Aerospace series. Cables, electrical, aircraft use. Test methodsCorona extinction voltage
BS EN 3475-401:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsAccelerated ageing
BS EN 3475-402:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsShrinkage and delamination
BS EN 3475-403:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsDelamination and blocking
BS EN 3475-404:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsThermal shock
BS EN 3475-405:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsBending at ambient temperature
BS EN 3475-406:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsCold bend test
BS EN 3475-407:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsFlammability
BS EN 3475-407:2005. Aerospace series. Cable, electrical, aircraft use. Test methodsFlammability
BS EN 3475-407:2009. Aerospace series. Cables, electrical, aircraft use. Test methodsFlammability
BS EN 3475-408:2005. Aerospace series. Cables, electrical, aircraft use. Test methodsFire resistance
BS EN 3475-409:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsAir-excluded ageing
BS EN 3475-410:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsThermal endurance
BS EN 3475-411:2005. Aerospace series. Cables, electrical, aircraft use. Test methodsResistance to fluids
BS EN 3475-412:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsHumidity resistance
BS EN 3475-413:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsWrap back test
BS EN 3475-414:2005. Aerospace series. Cables, electrical, aircraft use. Test methodsDifferential scanning calorimeter (DSC test)
BS EN 3475-415:2005. Aerospace series. Cables, electrical, aircraft use. Test methodsRapid change of temperature
BS EN 3475-416:2005. Aerospace series. Cables, electrical, aircraft use. Test methodsThermal stability
BS EN 3475-417:2009. Aerospace series. Cables, electrical, aircraft use. Test methodsFire resistance of cables confined inside a harness
BS EN 3475-418:2007. Aerospace series. Cables, electrical, aircraft use. Test methodsThermal endurance for conductors
BS EN 3475-501:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsDynamic cut-through
BS EN 3475-501:2006. Aerospace series. Cables, electrical, aircraft use. Test methodsDynamic cut-through
BS EN 3475-502:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsNotch propagation
BS EN 3475-503:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsScrape abrasion
BS EN 3475-504:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsTorsion
BS EN 3475-505:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsTensile tests on conductors and strands
BS EN 3475-505:2007. Aerospace series. Cables, electrical, aircraft use. Test methodsTensile test on conductors and strands
BS EN 3475-505:2012. Aerospace series. Cables, electrical, aircraft use. Test methodsTensile test on conductors and strands
BS EN 3475-506:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsPlating continuity
BS EN 3475-506:2007. Aerospace series. Cables, electrical, aircraft use. Test methodsPlating continuity
BS EN 3475-507:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsAdherence of plating
BS EN 3475-507:2007. Aerospace series. Cables, electrical, aircraft use. Test methodsAdherence of plating
BS EN 3475-508:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsPlating thickness
BS EN 3475-508:2007. Aerospace series. Cables, electrical, aircraft use. Test methodsPlating thickness
BS EN 3475-509:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsSolderability
BS EN 3475-510:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsTensile strength and elongation of extruded insulation, sheath and jacket material
BS EN 3475-511:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsCable-to-cable abrasion
BS EN 3475-512:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsFlexure endurance
BS EN 3475-513:2005. Aerospace series. Cables, electrical, aircraft use. Test methodsDeformation resistance (installation with plastic cable ties)
BS EN 3475-514:2007. Aerospace series. Cables, electrical, aircraft use. Test methodsPorosity of copper cladding on aluminium strands
BS EN 3475-515:2009. Aerospace series. Cable, electrical, aircraft use. Test methodsCrush resistance
BS EN 3475-601:2007. Aerospace series. Cables, electrical, aircraft use. Test methodsSmoke density
BS EN 3475-602:2007. Aerospace series. Cables, electrical, aircraft use. Test methodsToxicity
BS EN 3475-603:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsResistance to wet arc tracking
BS EN 3475-603:2007. Aerospace series. Cables, electrical, aircraft use. Test methodsResistance to wet arc tracking
BS EN 3475-603:2011. Aerospace series. Cables, electrical, aircraft use. Test methodsResistance to wet arc tracking
BS EN 3475-604:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsResistance to dry arc propagation
BS EN 3475-604:2010. Aerospace series. Cables, electrical, aircraft use. Test methodsResistance to dry arc propagation
BS EN 3475-605:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsWet short circuit test
BS EN 3475-605:2010. Aerospace series. Cables, electrical, aircraft use. Test methodsWet short circuit test
BS EN 3475-701:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsStrippability and adherence of insulation to the conductor
BS EN 3475-702:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsScreen pushback capability
BS EN 3475-703:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsPermanence of manufacturer's marking
BS EN 3475-704:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsFlexibility
BS EN 3475-704:2007. Aerospace series. Cables, electrical, aircraft use. Test methodsFlexibility
BS EN 3475-705:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsContrast measurement
BS EN 3475-705:2005. Aerospace series. Cable, electrical, aircraft use. Test methodsContrast measurement
BS EN 3475-706:2005. Aerospace series. Cables, electrical, aircraft use. Test methodsLaser markability
BS EN 3475-801:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsCapacitance per unit length
BS EN 3475-802:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsCapacitance unbalance
BS EN 3475-802:2009. Aerospace series. Cables, electrical, aircraft use. Test methodsCapacitance unbalance
BS EN 3475-803:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsCapacitance variation
BS EN 3475-804:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsVelocity of propagation
BS EN 3475-805:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsCharacteristic impedance
BS EN 3475-806:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsAttenuation
BS EN 3475-807:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsTransfer impedance
BS EN 3475-808:2002. Aerospace series. Cables, electrical, aircraft use. Test methodsCross-talk
BS EN 3475-809:2009. Aerospace series. Cables, electrical, aircraft use. Test methodsResistance unbalance
BS EN 3475-810:2009. Aerospace series. Cables, electrical, aircraft use. Test methodsStructural return loss
BS EN 3475-811:2009. Aerospace series. Cables, electrical, aircraft use. Test methodsUnbalance attenuation
BS EN 3475-812:2009. Aerospace series. Cables, electrical, aircraft use. Test methodsReturn loss (VSWR)
BS EN 3476:2006. Aerospace series. Steel FE-PL1501 (30CrMo12). Air melted. Softened. Forging stock. a or D ≤ 300 mm
BS EN 3479:2007. Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Plate. 6 mm < a ≤ 20 mm. 1070 MPa ≤ Rm ≤ 1220 MPa
BS EN 348:1992. Protective clothing. Determination of behaviour of materials on impact of small splashes of molten metal
BS EN 3480:2007. Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened. Plate. 6 mm < a ≤ 50 mm. 500 MPa ≤ Rm ≤ 700 MPa
BS EN 3487:2007. Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened. Bar for machining. a or D ≤ 250 mm. 500 MPa ≤ Rm ≤ 700 MPa
BS EN 3488:2007. Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened. Sheet and strip. a ≤ 6 mm. 500 MPa ≤ Rm ≤ 700 MPa
BS EN 349:1993+A1:2008. Safety of machinery. Minimum gaps to avoid crushing of parts of the human body
BS EN 3490:2007. Aerospace series. Steel FE-PM3901 (X15CrNi17-3). Air melted. Hardened and tempered. Bar for machining. De ≤ 200 mm. 900 MPa ≤ Rm ≤ 1100 MPa
BS EN 3491:2006. Aerospace series. Steel FE-PM3901 (X15CrNi17-3). Air melted. Hardened and tempered. Forgings. De ≤ 100 mm. 900 MPa ≤ Rm ≤ 1100 MPa
BS EN 3-5:1996. Portable fire extinguishersSpecification and supplementary tests
BS EN 35:2000. Pedestal bidets with over-rim supply. Connecting dimensions
BS EN 350-1:1994. Durability of wood and wood-based products. Natural durability of solid woodGuide to the principles of testing and classification of natural durability of wood
BS EN 350-2:1994. Durability of wood and wood-based products. Natural durability of solid woodGuide to natural durability and treatability of selected wood species of importance in Europe
BS EN 3506:2001. Aerospace series. Hot rolled sheets and plates in heat resisting alloys. Thickness 2,0 mm ≤ a ≤ 100 mm. Dimensions
BS EN 3507:2006. Aerospace series. Steel FE-PL1501 (30CrMo12). Air melted. Hardened and tempered. Forgings. De ≤ 100 mm. 930 MPa ≤ Rm ≤ 1080 MPa
BS EN 351-1:1996. Durability of wood and wood-based products. Preservative-treated solid woodClassification of preservative penetration and retention
BS EN 351-1:2007. Durability of wood and wood-based products. Preservative-treated solid woodClassification of preservative penetration and retention
BS EN 351-2:1996. Durability of wood and wood-based products. Preservative-treated solid woodGuidance on sampling for the analysis of preservative-treated wood
BS EN 351-2:2007. Durability of wood and wood-based products. Preservative-treated solid woodGuidance on sampling for the analysis of preservative-treated wood
BS EN 352-1:1993. Hearing protectors. Safety requirements and testingEar muffs
BS EN 352-1:2002. Hearing protectors. Safety requirements and testingEar-muffs
BS EN 352-2:1993. Hearing protectors. Safety requirements and testingEar plugs
BS EN 352-2:2002. Hearing protectors. Safety requirements and testingEar-plugs
BS EN 352-3:1997. Hearing protectors. Safety requirements and testingEar-muffs attached to an industrial safety helmet
BS EN 352-3:2002. Hearing protectors. Safety requirements and testingEar-muffs attached to an industrial safety helmet
BS EN 3523:2007. Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Bar for machining. De ≤ 100 mm. 1080 MPa ≤ Rm ≤ 1280 MPa
BS EN 352-4:2001. Hearing protectors. Safety requirements and testingLevel-dependent ear-muffs
BS EN 3524:2007. Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Sheet and strip. 2 mm ≤ a ≤ 6 mm. 1080 MPa ≤ Rm ≤1280 MPa
BS EN 352-5:2002. Hearing protectors. Safety requirements and testingActive noise reduction ear muffs
BS EN 3525:2007. Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Plate. 6 mm $3Q a ≤ 20 mm. 1080 MPa ≤ Rm ≤ 1280 MPa
BS EN 352-6:2002. Hearing protectors. Safety requirements and testingEar-muffs with electrical audio input
BS EN 3526:2007. Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Sheet and strip. 0,5 mm ≤ a ≤ 6 mm. 980 MPa ≤ Rm ≤ 1180 MPa
BS EN 352-7:2002. Hearing protectors. Safety requirements and testingLevel-dependent ear-plugs
BS EN 3527:2007. Aerospace series. Steel FE-PL1504 (33CrMoV12). Air melted. Softened. Forging stock. a or D ≤ 300 mm
BS EN 352-8:2008. Hearing protectors. Safety requirements and testingEntertainment audio ear-muffs
BS EN 3528:2013. Aerospace series. Steel X2NiCoMo18-8-5 (1.6359). Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. 1 750 MPa ≤ Rm ≤ 2 000 MPa
BS EN 3529:2010. Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5). Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. 1750 MPa ≤ Rm ≤ 2000 MPa
BS EN 353-1:1993. Personal protective equipment against falls from a heightSpecification for guided type fall arresters on a rigid anchorage line
BS EN 353-1:2002. Personal protective equipment against falls from a heightGuided type fall arresters including a rigid anchor line
BS EN 3531:2007. Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5). Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Sheet and strip. a ≤ 6 mm. 1750 MPa ≤ Rm ≤ 2000 MPa
BS EN 353-2:1993. Personal protective equipment against falls from a heightSpecification for guided type fall arresters on a flexible anchorage line
BS EN 353-2:2002. Personal protective equipment against falls from a heightGuided type fall arresters including a flexible anchor line
BS EN 3532:2007. Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5).Vacuum induction melt ed and vacuum arc remelted. Solution treated and precipitation treated.P late. 6 mm $2J a ≤ 40 mm. 1750 MPa ≤ Rm ≤ 2000 MPa
BS EN 3536:2006. Aerospace series. Nuts, hexagon, self-locking, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C
BS EN 3537:2010. Aerospace series. Nuts, anchor, self-locking, fixed, two lug, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C
BS EN 3538:2010. Aerospace series. Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C
BS EN 3539:2010. Aerospace series. Nuts, anchor, self-locking, one lug, fixed, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C
BS EN 354:1993. Personal protective equipment against falls from a height. Lanyards
BS EN 354:2002. Personal protective equipment against falls from a height. Lanyards
BS EN 354:2010. Personal fall protection equipment. Lanyards
BS EN 3541:1992. Rod ends, adjustable, self-aligning ball bearing with threaded shank. Dimensions, torques, clearances and loads
BS EN 3542:1998. Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750)
BS EN 3543:1997. Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature)/425°C
BS EN 3545-001:2005. Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -5 °C to 175 °CTechnical specification
BS EN 3545-001:2008. Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55°C to 175°CTechnical specification
BS EN 3545-002:2005. Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55°C to 175°CSpecification of performance and contact arrangements
BS EN 3545-002:2008. Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C Specification of performance and contact arrangements
BS EN 3545-003:2005. Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °CConnectors with female contacts. Product standard
BS EN 3545-004:2005. Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °CConnectors with male contacts. Product standard
BS EN 3545-005:2006. Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55°C to 175°CMale coding and attachment system for mounting on free housing (plug). Product standard
BS EN 3545-006:2006. Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55°C to 175°CMale coding and attachment system for fitment on fixed housing (receptacle). Product standard
BS EN 3545-007:2005. Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °CCable clamp. Product standard
BS EN 3545-008:2006. Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55°C to 175°CTools for assembly/removal of coding and attachment systems. Product standard
BS EN 3545-009:2008. Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °CProtective cover for plug and receptacle. Product standard
BS EN 355:1993. Personal protective equipment against falls from a height. Energy absorbers
BS EN 355:2002. Personal protective equipment against falls from a height. Energy absorbers
BS EN 3552:2005. Aerospace series. Aluminium alloy AL-P2618A-T6 or T62. Clad sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 3553:2004. Aerospace series. Aluminium alloy AL-P2618A-T6511. Extruded bar and section. a or D ≤ 160 mm
BS EN 356:2000. Glass in building. Security glazing. Testing and classification of resistance against manual attack
BS EN 3561:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Ferrules with dynamic beam seal end, welded and reduced at pipe end
BS EN 3566:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Adaptor with lockring
BS EN 3567-001:2001. Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553BTechnical specification
BS EN 3567-003:2001. Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553BSingle in-line couplers. Product standard
BS EN 3567-004:2001. Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553BDouble in-line couplers. Product standard
BS EN 357:2000. Glass in building. Fire resistant glazed elements with transparent or translucent glass products. Classification of fire resistance
BS EN 357:2004. Glass in building. Fire resistant glazed elements with transparent or translucent glass products. Classification of fire resistance
BS EN 358:1993. Personal equipment for work positioning and prevention of falls from a height. Work positioning systems
BS EN 358:2000. Personal protective equipment for work positioning and prevention of falls from a height. Belts for work positioning and restraint and work positioning lanyards
BS EN 3-6:1996. Portable fire extinguishersProvisions for the attestation of conformity of portable fire extinguishers in accordance with EN 3 Part 1 to Part 5
BS EN 36:1999. Wall-hung bidets with over-rim supply. Connecting dimensions
BS EN 360:1993. Personal protective equipment against falls from a height. Retractable type fall arresters
BS EN 360:2002. Personal protective equipment against falls from a height. Retractable type fall arresters
BS EN 361:1993. Personal protective equipment against falls from a height. Full body harnesses
BS EN 361:2002. Personal protective equipment against falls from a height. Full body harnesses
BS EN 3611:1995. Spigots. Dimensions and fit selection. Design standard
BS EN 3612:1997. Undercuts for splines. Design standard
BS EN 3613:2009. Aerospace series. Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NIPH2601 (Inconel 718), silver plated. Classification: 1275 MPa/650 °C
BS EN 3614:2009. Aerospace series. Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated. Classification: 900 MPa/650°C
BS EN 362:1993. Personal protective equipment against falls from a height. Connectors
BS EN 362:2004. Personal protective equipment against falls from a height. Connectors
BS EN 363:1993. Personal protective equipment against falls from a height. Fall arrest systems
BS EN 363:2002. Personal protective equipment against falls from a height. Fall arrest systems
BS EN 363:2008. Personal fall protection equipment. Personal fall protection systems
BS EN 3630:2008. Aerospace series. Fluid fittings, flanged, straight. Sealing by O-ring for 0,8 mm thick tubes
BS EN 3631:2008. Aerospace series. Fluid fittings, flanged, 90° elbowed. Sealing by O-ring for 0,8 mm thick tubes
BS EN 3633:2008. Aerospace series. Installation hole for fluid fittings, flanged
BS EN 3635:2008. Aerospace series. Weld lip. Geometrical configuration
BS EN 3636:2008. Aerospace series. Screws, reduced pan head, offset cruciform recess, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 900 MPa/650°C
BS EN 3637:2008. Aerospace series. Nuts, self-locking, bihexagonal (double reduced), in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, Classification: 1210 MPa/730 °C
BS EN 3638:2007. Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Consumable electrode remelted. Solution and precipitation treated. Sheet, strip and plate. 0,5 mm ≤ a ≤ 10 mm
BS EN 364:1993. Personal protective equipment against falls from a height. Test methods
BS EN 3642:1997. Rivets, solid, 100° countersunk normal head, with dome, in titanium TI-PO2, anodized, inch based series
BS EN 3643:1997. Rivets, solid, 100° countersunk normal head, in titanium TI-PO2, anodized, inch based series
BS EN 3644:1997. Rivets, solid, universal head, in titanium TI-PO2, anodized, inch based series
BS EN 3645-001:2007. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuousTechnical specification
BS EN 3645-001:2013. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuousTechnical specification
BS EN 3645-002:2007. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuousSpecification of performance and contact arrangements
BS EN 3645-003:2006. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuousReceptacle square flange mounting. Product standard
BS EN 3645-004:2006. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuousReceptacle, hermetic, square flange mounting. Product standard
BS EN 3645-005:2006. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuousReceptacle, hermetic, round flange, brasage mounting. Product standard
BS EN 3645-006:2006. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuousProtective cover for receptacle. Product standard
BS EN 3645-007:2007. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuousProtective cover for plug. Product standard
BS EN 3645-008:2007. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuousNon release plug with grounding ring. Product standard
BS EN 3645-009:2006. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuousReceptacle, round flange, jam nut mounting. Product standard
BS EN 3645-010:2006. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuousReceptacle, hermetic, round flange, jam nut mounting. Product standard
BS EN 3645-011:2006. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuousLanyard release plug with grounding fingers. Type 1. Product standard
BS EN 3645-012:2006. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuousLanyard release plug with grounding fingers. Type 2. Product standard
BS EN 3645-013:2007. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuousDummy receptacle. Product standard
BS EN 3646-001:2007. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuousTechnical specification
BS EN 3646-002:2007. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuousSpecification of performance and contact arrangements
BS EN 3646-003:2006. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuousReceptacle, square flange mounting. Product standard
BS EN 3646-004:2006. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuousReceptacle, jam-nut mounting. Product standard
BS EN 3646-004:2013. Aerospace series. Connectors, electrical, circular, bayonet coupling,operating temperature 175°C or 200°C continuousReceptacle, jam-nut mounting. Product standard
BS EN 3646-005:2006. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuousReceptacle, hermetic, square flange mounting. Product standard
BS EN 3646-006:2006. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuousReceptacle, hermetic jam-nut mounting. Product standard
BS EN 3646-007:2006. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuousReceptacle, hermetic, round flange, welding or brazing mounting. Product standard
BS EN 3646-008:2006. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuousPlug. Product standard
BS EN 3646-009:2006. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuousProtective cover for receptacle. Product standard
BS EN 3646-010:2006. Aerospace series. Connectors, electrical, circular, bayonet coupling. Operating temperature 175°C or 200°C continuous dutyProtective cover for plug. Product standard
BS EN 3646-011:2006. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuousDummy receptacle. Product standard
BS EN 365:1993. Personal protective equipment against falls from a height. General requirements for instructions for use and for marking
BS EN 365:2004. Personal protective equipment against falls from a height. General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging
BS EN 3653:2010. Aerospace series. Nuts, anchor, self-locking, floating, self-aligning, one lug, in steel, cadmium plated, MoS2 lubricated. Classification: 900 MPa (at ambient temperature)/235°C
BS EN 3658:2008. Aerospace series. Tube bend radii, for engine application. Design standard
BS EN 366:1993. Protective clothing. Protection against heat and fire. Method of test: evaluation of materials and material assemblies when exposed to a source of radiant heat
BS EN 3660-001:2006. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsTechnical specification
BS EN 3660-002:2006. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsIndex of product standards
BS EN 3660-003:2006. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsGrommet nut, style A for EN 2997 and EN 4067. Product standard
BS EN 3660-003:2009. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsGrommet nut, style A for EN 2997 and EN 4067. Product standard
BS EN 3660-004:2006. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style A, straight, unsealed with clamp strain relief for EN 2997 and EN 4067. Product standard
BS EN 3660-004:2009. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style A, straight, unsealed with clamp strain relief for EN 2997 and EN 4067. Product standard
BS EN 3660-005:2006. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style A, 90°, unsealed with clamp strain relief for EN 2997 and EN 4067. Product standard
BS EN 3660-005:2009. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style A, 90°, unsealed with clamp strain relief for EN 2997 and EN 4067. Product standard
BS EN 3660-006:2010. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, self-locking, style C, straight, shielded (cone grounding), unsealed with clamp strain relief. Product standard
BS EN 3660-007:2010. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, self-locking, style C, 90°, shielded (cone grounding), unsealed with clamp strain relief. Product standard
BS EN 3660-008:2010. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, self-locking, style C, 45°, shielded (cone grounding), unsealed with clamp strain relief. Product standard
BS EN 3660-009:2007. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style J, straight, sealed, for heat shrinkable boot. Product standard
BS EN 3660-010:2010. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style K, straight, shielded, sealed, for heat shrinkable boot. Product standard
BS EN 3660-011:2010. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style K, 90°, shielded, sealed, for heat shrinkable boot. Product standard
BS EN 3660-012:2008. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsGrommet nut, style A for EN 3372. Product standard
BS EN 3660-013:2008. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style A, straight, unsealed, with cable tie strain relief. Product standard
BS EN 3660-014:2008. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style A, 90°, unsealed, with cable tie strain relief. Product standard
BS EN 3660-015:2008. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style A, 45°, unsealed, with cable tie strain relief. Product standard
BS EN 3660-016:2009. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsGrommet nut, style A, self-locking and non self-locking for EN 3645. Product standard
BS EN 3660-017:2009. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style A, straight, unsealed, with cable tie strain relief. Product standard
BS EN 3660-018:2009. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style A, 90°, unsealed, with cable tie strain relief. Product standard
BS EN 3660-019:2009. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style A, 45°, unsealed, with cable tie strain relief. Product standard
BS EN 3660-020:2009. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style A, straight, unsealed, self-locking with clamp strain relief for EN 3645. Product standard
BS EN 3660-021:2009. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style A, 90°, unsealed, self-locking with clamp strain relief for EN 3645. Product standard
BS EN 3660-022:2008. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style A, straight, composite, unsealed, with cable tie strain relief. Product standard
BS EN 3660-023:2008. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style A, 90°, composite, unsealed, with cable tie strain relief. Product standard
BS EN 3660-024:2008. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsGrommet nut, style A, composite. Product standard
BS EN 3660-025:2009. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style A, straight, unsealed, with cable tie strain relief for EN 3646. Product standard
BS EN 3660-025:2013. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style A, straight, unsealed, with cable tie strain relief for EN 3646. Product standard
BS EN 3660-026:2009. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style A, 90°, unsealed, with cable tie strain relief for EN 3646. Product standard
BS EN 3660-027:2009. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style A, 45°, unsealed, with cable tie strain relief for EN 3646. Product standard
BS EN 3660-027:2013. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style A, 45°, unsealed, with cable tie strain relief for EN 3646. Product standard
BS EN 3660-036:2009. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsSpacer pad for cable outlet, style Z. Product standard
BS EN 3660-037:2009. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsBushing strip, elastomer, for cable outlet, style Z. Product standard
BS EN 3660-038:2013. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsManual installation tool, style Z, for installation of stainless steel shield termination band EN 3660-033, to cable outlet accessories. Product standard
BS EN 3660-062:2009. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style K, 90°C, for heat shrinkable boot, shielded, sealed, self-locking for EN 3645. Product standard
BS EN 3660-063:2009. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking for EN 3645. Product standard
BS EN 3660-064:2009. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking for EN 2997 and EN 4067. Product standard
BS EN 3660-065:2009. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectorsCable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed, self-locking for EN 2997 and EN 4067. Product standard
BS EN 3661-001:2006. Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 ATechnical specification
BS EN 3661-005:2006. Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 AWith polarized signal contact. Product standard
BS EN 3661-006:2006. Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 AWith polarized signal contact. Bus bar version. Product standard
BS EN 3662-001:2006. Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current from 20 A to 50 ATechnical specification
BS EN 3662-005:2006. Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 AWith polarized signal contact. Product standard
BS EN 3662-006:2006. Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 AWith polarized signal contact. Bus-bar version. Product standard
BS EN 3663:2001. Aerospace series. Pipe coupling. O-rings in rubber NBR, 75 IRHD, temperature range: -55°C to 135°C
BS EN 3665:1997. Test methods for paints and varnishes. Filiform corrosion resistance test on aluminium alloys
BS EN 3668:2006. Aerospace series. Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9). Non heat treated. Forging stock. a or D ≤ 250 mm
BS EN 367:1992. Protective clothing. Protection against heat and fire. Method for determining heat transmission on exposure to flame
BS EN 3671:2007. Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Non heat treated. Forging stock. a or D ≤ 250 mm
BS EN 3672:2008. Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30° swage. Classification: 1210 MPa (at ambient temperature)/730 °C
BS EN 3676:1998. Inserts, thin wall, self-locking. Design standard
BS EN 3677:2007. Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1310 MPa
BS EN 3678:2007. Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 930 MPa
BS EN 368:1993. Protective clothing. Protection against liquid chemicals. Test method: resistance of materials to penetration by liquids
BS EN 3682-001:2006. Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuousTechnical specification
BS EN 3682-001:2013. Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuousTechnical specification
BS EN 3682-002:2006. Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuousSpecification of performance and contact arrangements
BS EN 3682-002:2013. Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuousSpecification of performance and contact arrangements
BS EN 3682-003:2006. Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuousInserts. Product standard
BS EN 3682-003:2012. Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuousInserts. Product standard
BS EN 3682-004:2006. Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuousSize 2 receptacle. Product standard
BS EN 3682-004:2012. Aerospace series. Connectors, plug and receptacle, electrical, rect angular, interchangeable insert type, rack to panel, operatingtemperatur e 150°C continuousSize 2 receptacle. Product standard
BS EN 3682-005:2006. Aerospace Series. Connectors, plug and receptacle, electrical,rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuousSize 2 plug. Product standard
BS EN 3682-005:2013. Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuousSize 2 plug. Product standard
BS EN 3682-006:2006. Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuousSize 3 receptacle. Product standard
BS EN 3682-006:2013. Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuousSize 3 receptacle. Product standard
BS EN 3682-007:2006. Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuousSize 3 plug. Product standard
BS EN 3682-007:2013. Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuousSize 3 plug. Product standard
BS EN 3682-008:2006. Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuousSize 4 receptacle. Product standard
BS EN 3682-008:2013. Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuousSize 4 receptacle. Product standard
BS EN 3682-009:2006. Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuousSize 4 plug. Product standard
BS EN 3682-009:2013. Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuousSize 4 plug. Product standard
BS EN 3683:2007. Aerospace series. Test methods. Titanium alloy wrought products. Determination of primary α content. Point count method and line intercept method
BS EN 3684:2007. Aerospace series. Test methods. Titanium alloy wrought products. Determination of β transus temperature. Metallographic method
BS EN 3685:2008. Aerospace series. Bolts in heat resisting steel FE-PA2601 (A286). Classification: 1100 MPa/650 °C. Technical specification
BS EN 3686:2008. Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 1100 MPa/650°C
BS EN 3687:2010. Aerospace series. Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated.Classifi cation: 1100 MPa/650 °C
BS EN 3688:2001. Aerospace series. T-ring fillers in titanium alloy for welded pipes. 14000 kPa nominal pressure
BS EN 3689:2001. Aerospace series. T-ring fillers in titanium alloy for welding pipes. 28000 kPa nominal pressure
BS EN 369:1993. Protective clothing. Protection against liquid chemicals. Test method. Resistance of materials to permeation by liquids
BS EN 3690:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, bulkhead, long
BS EN 3691:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, bulkhead, long welded
BS EN 3696:2001. Aerospace series. Washers in heat resisting steel
BS EN 3697:2013. Aerospace series. Acrylonitrile-butadiene rubber (NBR). Low temperature resistant. Hardness 60 IRHD
BS EN 3698:2013. Aerospace series. Acrylonitrile-butadiene rubber (NBR). Low temperature resistant. Hardness 70 IRHD
BS EN 37:1999. Pedestal W.C. pans with independent water supply. Connecting dimensions
BS EN 3-7:2004+A1:2007. Portable fire extinguishersCharacteristics, performance requirements and test methods
BS EN 370:1993. Wood preservatives. Determination of eradicant efficacy in preventing emergence of Anobium punctatum (De Geer)
BS EN 3706:2012. Aerospace series. Headless threaded plugs, cross recess, in aluminium alloy 5086
BS EN 3707:2012. Aerospace series. Headless threaded plugs. Installation holes
BS EN 3708-001:2006. Aerospace series. Modular interconnection systems. Terminal junction systemsTechnical specification
BS EN 3708-002:2006. Aerospace series. Modular interconnection systems. Terminal junction systemsPerformance specification
BS EN 3708-003:2006. Aerospace series. Modular interconnection systems. Terminal junction systemsRemovable feedback modules version, sealed. Product standard
BS EN 3708-004:2006. Aerospace series. Modular interconnection systems. Terminal junction systemsRemovable feedback modules version, unsealed. Product standard
BS EN 3708-005:2006. Aerospace series. Modular interconnection systems. Terminal junction systemsFrames with accessories for feedback modules version, sealed and unsealed. Product standard
BS EN 3709:2006. Aerospace series. Wrenches and sockets, bi-hexagonal. Technical specification
BS EN 371:1992. Specification for AX gas filters and combined filters against low boiling organic compounds used in respiratory protection equipment
BS EN 3710:2008. Aerospace series. Sockets, bi-hexagonal. Technical specification
BS EN 3711:2008. Aerospace series. Wrench-double ended, bi-hexagonal. Straight, cranked, offset
BS EN 3712:2007. Aerospace series. Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium plated, MoS2, lubricated. Classification: 1100 MPa (at ambient temperature)/235 °C
BS EN 3716-001:2006. Aerospace series. Connectors, single-way, with triaxial interface, for transmission of digital dataTechnical specification
BS EN 3716-002:2006. Aerospace series. Connectors, single-way, with triaxial interface, for transmission of digital dataConditions of use and list of product standards
BS EN 3716-003:2006. Aerospace series. Connectors, single-way, with triaxial interface, for transmission of digital dataSolder receptacle. Product standard
BS EN 3716-004:2006. Aerospace series. Connectors, single-way with triaxial interface, for transmission of digital dataSolder plug. Product standard
BS EN 3716-005:2006. Aerospace series. Connector, single-way with triaxial interface, for transmission of digital dataCrimp receptacle. Product standard
BS EN 3716-006:2006. Aerospace series. Connector, single-way with triaxial interface, for transmission of digital dataCrimp plug. Product standard
BS EN 3717:2008. Aerospace series. Tubes. Selection for engines fluid systems
BS EN 3718:2012. Aerospace series. Test method for metallic materials. Ultrasonic inspection of tubes
BS EN 3719:2005. Aerospace series. Aluminium or aluminium alloy conductors for electrical cables. Product standard
BS EN 3719:2010. Aerospace series. Aluminium or aluminium alloy conductors for electrical cables. Product standard
BS EN 372:1992. Specification for SX gas filters and combined filters against specific named compounds used in respiratory protective equipment
BS EN 3721:1995
BS EN 3724:2004
BS EN 3726:2003. Aerospace series. Nuts, self-locking, clip, in heat resisting steel FE-PA92HT (A286), MoS2 coated. Classification: 1 100 MPa (at ambient temperature)/425°C
BS EN 3727:2006. Aerospace series. Bearings, airframe rolling rigid with flanged alignment housing. Technical specification
BS EN 3728:2008. Aerospace series. Shaft-nuts, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated
BS EN 3729:2008. Aerospace series. Rings, threaded, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated
BS EN 373:1993. Protective clothing. Assessment of resistance of materials to molten metal splash
BS EN 3730:2001. Aerospace series. Clamps, saddle. Fixed and sliding version in aluminium alloy with rubber cushioning. Dimensions. Masses
BS EN 3730:2009. Aerospace series. Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning. Dimension, masses
BS EN 3733-001:2009. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuousTechnical specification
BS EN 3733-002:2008. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150°C continuousList of product standards
BS EN 3733-003:2008. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150°C continuousPlug connector for cable according to EN 4532, product standard
BS EN 3733-004:2008. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuousReceptacle, connector, four hole fixing cable according to EN 4532, product standard
BS EN 3733-005:2007. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuousReceptacle, connector, two hole fixing for cable according to EN 4532, product standard
BS EN 3733-006:2008. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuousReceptacle, connector, jam nut fixing for cable according to EN 4532, product standard
BS EN 3733-007:2007. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuousFerrule (optical contact) for EN 4532 (200 μm/280 μm fibre). Product standard
BS EN 3733-008:2006. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous Plug sub-assembly for cable to EN 4532 (200 μm/280 μm fibre). Product standard
BS EN 3733-009:2006. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuousReceptacle sub-assembly for cable to EN 4532 (200 μm/280 μm fibre). Product standard
BS EN 3733-101:2008. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous Protective cover receptacle. Product standard
BS EN 3733-103:2008. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuousProtective cover jam nut receptacle. Product standard
BS EN 3733-104:2008. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuousReceptacle connector dummy four holes fixing. Product standard
BS EN 3733-105:2008. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuousReceptacle connector dummy two holes fixing. Product standard
BS EN 3733-106:2008. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuousReceptacle connector dummy jam nut. Product standard
BS EN 3733-108:2008. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuousCable support boot. Product standard
BS EN 374-1:1994. Protective gloves against chemicals and micro-organismsTerminology and performance requirements
BS EN 3741:2003. Aerospace series. Nuts, clip, metric. Installation holes and assembly
BS EN 374-1:2003. Protective gloves against chemicals and micro-organismsTerminology and performance requirements
BS EN 3741:2004. Aerospace series. Nuts, clip, metric. Installation holes and assembly
BS EN 374-2:1994. Protective gloves against chemicals and micro-organismsDetermination of resistance to penetration
BS EN 374-2:2003. Protective gloves against chemicals and micro-organismsDetermination of resistance to penetration
BS EN 374-3:1994. Protective gloves against chemicals and micro-organismsDetermination of resistance to permeation by chemicals
BS EN 374-3:2003. Protective gloves against chemicals and micro-organismsDetermination of resistance to permeation by chemicals
BS EN 3745-100:2008. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsGeneral
BS EN 3745-201:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsVisual examination
BS EN 3745-202:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsFibre dimensions
BS EN 3745-203:2008. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsCable dimensions
BS EN 3745-205:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsCable longitudinal dimensional stability
BS EN 3745-301:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsAttenuation
BS EN 3745-301:2012. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsAttenuation
BS EN 3745-302:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsNumerical aperture
BS EN 3745-303:2007. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsBandwidth
BS EN 3745-305:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsImmunity to ambient light coupling
BS EN 3745-306:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsVariation of attenuation during temperature cycling
BS EN 3745-401:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsAccelerated ageing
BS EN 3745-402:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsTemperature cycling
BS EN 3745-404:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsThermal shock
BS EN 3745-405:2012. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsLow/high temperature bend test
BS EN 3745-406:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsCold bend test
BS EN 3745-407:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsFlammability
BS EN 3745-410:2007. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsThermal life
BS EN 3745-411:2007. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsResistance to fluids
BS EN 3745-412:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsHumidity resistance
BS EN 3745-501:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsOptical fibre proof test
BS EN 3745-502:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsTensile strength for short length of optical fibres
BS EN 3745-503:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsScrape abrasion
BS EN 3745-504:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsMicro bending test
BS EN 3745-505:2007. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsCable tension strength
BS EN 3745-506:2009. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsImpact resistance
BS EN 3745-507:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsCut-through
BS EN 3745-508:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsTorsion
BS EN 3745-509:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsKink test
BS EN 3745-510:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsBending test
BS EN 3745-510:2012. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsBending test
BS EN 3745-511:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsCable to cable abrasion
BS EN 3745-512:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsFlexure endurance
BS EN 3745-513:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsCrush resistance
BS EN 3745-514:2009. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsCable twist bend
BS EN 3745-515:2012. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsBuffer insertion force
BS EN 3745-516:2012. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsSevere cable bend test
BS EN 3745-517:2012. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsCable tie clamping test
BS EN 3745-601:2007. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsSmoke density
BS EN 3745-602:2008. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsToxicity
BS EN 3745-603:2008. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsNuclear radiation
BS EN 3745-701:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsStrippability
BS EN 3745-703:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsDurability of manufacturer's marking
BS EN 3745-705:2007. Aerospace series. Fibres and cables, optical, aircraft use. Test methodsContrast measurement
BS EN 3746:2003. Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Hardness 80 IRHD
BS EN 3746:2007. Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Hardness 80 IRHD
BS EN 3747:2003. Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Technical specification
BS EN 3747:2007. Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Technical specification
BS EN 3748:2001. Aerospace series. O-ring grooves. Dimensions
BS EN 375:1992. Specification for labelling of in vitro diagnostic reagents for professional use
BS EN 375:2001. Information supplied by the manufacturer with in vitro diagnostic reagents for professional use
BS EN 3750:2010. Aerospace series. Nuts, anchor, self-locking, fixed, 90° corner, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C
BS EN 3753:2010. Aerospace series. Nuts, anchor, self-locking, fixed, 60° corner, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/235°C
BS EN 3757:2009. Aerospace series. Nuts, anchor, self-locking, floating, self-aligning, two lugs, in heat resisting steel, MoS2 lubricated. Classification: 900 MPa (at ambient temperature)/315°C
BS EN 3759:1997. Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature)/425°C
BS EN 376:1992. Specification for labelling of in vitro diagnostic reagents for self-testing
BS EN 376:2002. Information supplied by the manufacturer with in vitro diagnostic reagents for self-testing
BS EN 3760:1997. Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature)/425°C
BS EN 3763:2010. Aerospace series. Nuts, hexagonal, self-locking, ball seat, in heat resisting steel, MoS2 lubricated. Classification: 900 MPa (at ambient temperature)/315°C
BS EN 3768:2012. Aerospace series. Nuts. anchor, self-locking, one lug, fixed, reduced series, with counterbore, in heat resisting steel, MoS2lubricated. Classification: 1 100 MPa (at ambient temperature)/315 °C
BS EN 3769:1997. Electrolytic polishing of corrosion resisting steels and heat resisting alloys
BS EN 377:1993. Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes
BS EN 3773-003:1999
BS EN 3774-001:1999. Circuit breakers, three-pole, temperature compensated, rated currents 2A to 25A, switching capacity 65 InTechnical specification
BS EN 3774-003:1999. Circuit breakers, three-pole, temperature compensated, rated currents 2A to 25A, switching capacity 65 InMetric thread terminals. Product standard
BS EN 3774-004:1999. Circuit breakers, three-pole, temperature compensated, rated currents 2A to 25A, switching capacity 65 InUNC thread terminals. Product standard
BS EN 3777:2010. Aerospace series. Pins, quick release, single and double acting. Technical specification
BS EN 378-1:1995. Specification for refrigerating systems and heat pumps. Safety and environmental requirementsBasic requirements
BS EN 378-1:2000. Specification for refrigerating systems and heat pumps. Safety and environmental requirementsBasic requirements, definitions, classification and selection criteria
BS EN 3781:2008. Aerospace series. Grooves for spiral wound retaining rings. Design standard
BS EN 378-1:2008+A2:2012. Refrigerating systems and heat pumps. Safety and environmental requirementsBasic requirements, definitions, classification and selection criteria
BS EN 378-2:2000. Specification for refrigerating systems and heat pumps. Safety and environmental requirementsDesign, construction, testing, marking and documentation
BS EN 3782:2008. Aerospace series. Holes for 100° countersunk head screws. Design standard
BS EN 378-2:2008+A2:2012. Refrigerating systems and heat pumps. Safety and environmental requirementsDesign, construction, testing, marking and documentation
BS EN 378-3:2000. Specification for refrigerating systems and heat pumps. Safety and environmental requirementsInstallation site and personal protection
BS EN 378-3:2008+A1:2012. Refrigerating systems and heat pumps. Safety and environmental requirementsInstallation site and personal protection
BS EN 3783:2013. Aerospace series. Fibre composite materials. Normalisation of fibre dominated mechanical properties
BS EN 378-4:2000. Refrigerating systems and heat pumps. Safety and environmental requirementsOperation, maintenance, repair and recovery
BS EN 378-4:2008+A1:2012. Refrigerating systems and heat pumps. Safety and environmental requirementsOperation, maintenance, repair and recovery
BS EN 3788:2001. Aerospace series. Pipe coupling 8°30'. Protective caps
BS EN 3789:2001. Aerospace series. Pipe coupling 8°30'. Protective plug with external threads
BS EN 379:1994. Specification for filters with switchable or dual luminous transmittance for personal eye-protectors used in welding and similar operations
BS EN 379:2003+A1:2009. Personal eye-protection. Automatic welding filters
BS EN 3790:2001. Aerospace series. Pipe coupling 8°30'. Protective caps with internal threads
BS EN 3-8:2006. Portable fire extinguishersAdditional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar
BS EN 380:1993. Timber structures. Test methods. General principles for static load testing
BS EN 381-1:1993. Protective clothing for users of hand-held chain sawsTest rig for testing resistance to cutting by a chain saw
BS EN 381-10:2002. Protective clothing for users of hand-held chain sawsTest method for upper body protectors
BS EN 381-11:2002. Protective clothing for users of hand-held chain sawsRequirements for upper body protectors
BS EN 381-2:1995. Protective clothing for users of hand-held chain sawsTest methods for leg protectors
BS EN 381-3:1996. Protective clothing for users of hand-held chain sawsTest methods for footwear
BS EN 3813:2013. Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bar and wire for forged fasteners. De ≤ 50 mm
BS EN 381-4:1999. Protective clothing for users of hand-held chain sawsTest methods for chainsaw protective gloves
BS EN 381-5:1995. Protective clothing for users of hand-held chain sawsRequirements for leg protectors
BS EN 3816:2006. Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened and cold rolled. Sheet and strip. a ≤ 3 mm. Rm ≥ 800 MPa
BS EN 381-7:1999. Protective clothing for users of hand-held chain sawsRequirements for chainsaw protective gloves
BS EN 381-8:1997. Protective clothing for users of hand-held chain sawsTest methods for chain saw protective gaiters
BS EN 3818:2003. Bolts with MJ threads, in titanium alloy TI-P64001. Classification:1100 MPa (at ambient temperature). Technical specification
BS EN 3818:2004. Aerospace series. Bolts, MJ threads, in titanium alloy TI-P64001. Strength class: 1100 MPa (at ambient temperature). Technical specification
BS EN 381-9:1997. Protective clothing for users of hand-held chain sawsRequirements for chain saw protective gaiters
BS EN 3819:2008. Aerospace series. Clearance for wrenches and sockets
BS EN 382-1:1993. Fibreboards. Determination of surface absorptionFireboards. Determination of surface absorption. Test method for dry process fibreboards
BS EN 382-2:1994. Fibreboards. Determination of surface absorptionFireboards. Determination of surface absorption. Test methods for hardboards
BS EN 383:1993. Timber structures. Test methods. Determination of embedding strength and foundation values for dowel type fasteners
BS EN 383:2007. Timber structures. Test methods. Determination of embedment strength and foundation values for dowel type fasteners
BS EN 3831:2003. Aerospace series. Inserts, thickwall, self-locking, in heat resisting steel FE-PM3801 (17-4PH), MoS2 coated
BS EN 3832:2003. Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classification: 1550 MPa (at ambient temperature) / 650°C
BS EN 3832:2004. Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1550 MPa (at ambient temperature) / 650°C
BS EN 3833:2003. Aerospace series. Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1550 MPa (at ambient temperature) / 650°C. Technical specifications
BS EN 3833:2004. Aerospace series. Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated. Classification: 1550 MPa (at ambient temperature) / 650°C. Technical specification
BS EN 3834:2010. Aerospace series. Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in corrosion resisting steel, MoS2 lubricated. Classification: 900 MPa (at ambient temperature)/315°C
BS EN 3838:2010. Aerospace series. Requirements and tests on user-applied markings on aircraft electrical cables
BS EN 384:1995. Structural timber. Determination of characteristic values of mechanical properties and density
BS EN 384:2004. Structural timber. Determination of characteristic values of mechanical properties and density
BS EN 384:2010. Structural timber. Determination of characteristic values of mechanical properties and density
BS EN 3840:2007. Aerospace series. Paints and varnishes. Technical specification
BS EN 3841-100:2004. Aerospace series. Circuit breakers. Test methodsGeneral
BS EN 3841-201:2004. Aerospace series. Circuit breakers. Test methodsVisual inspection
BS EN 3841-202:2004. Aerospace series. Circuit breakers. Test methodsDimensions and masses
BS EN 3841-301:2004. Aerospace series. Circuit breakers. Test methodsVoltage drop
BS EN 3841-302:2004. Aerospace series. Circuit breakers. Test methodsInsulation resistance
BS EN 3841-303:2004. Aerospace series. Circuit breakers. Test methodsDielectric strength
BS EN 3841-304:2004. Aerospace series. Circuit breakers. Test methodsTripping points
BS EN 3841-305:2004. Aerospace series. Circuit breakers. Test methodsShort-circuit performance
BS EN 3841-306:2004. Aerospace series. Circuit breakers. Test methodsService life
BS EN 3841-307:2004. Aerospace series. Circuit breakers. Test methodsPerformance with a locked tripping system
BS EN 3841-308:2004. Aerospace series. Circuit breakers. Test methodsLightning
BS EN 3841-401:2004. Aerospace series. Circuit breakers. Test methodsSand and dust
BS EN 3841-402:2004. Aerospace series. Circuit breakers. Test methodsCorrosion
BS EN 3841-404:2004. Aerospace series. Circuit breakers. Test methodsExplosion proofness
BS EN 3841-405:2004. Aerospace series. Circuit breakers. Test methodsFluid resistance
BS EN 3841-406:2004. Aerospace series. Circuit breakers. Test methodsFlammability
BS EN 3841-407:2004. Aerospace series. Circuit breakers. Test methodsTemperature variation
BS EN 3841-501:2004. Aerospace series. Circuit breakers. Test methodsActuator button travel
BS EN 3841-503:2004. Aerospace series. Circuit breakers. Test methodsStrength of actuating components
BS EN 3841-504:2004. Aerospace series. Circuit breakers. Test methodsStrength of mounting elements
BS EN 3841-505:2004. Aerospace series. Circuit breakers. Test methodsStrength of main terminals
BS EN 3841-506:2004. Aerospace series. Circuit breakers. Test methodsVibration performance
BS EN 3841-507:2004. Aerospace series. Circuit breakers. Test methodsMechanical shocks
BS EN 3841-508:2004. Aerospace series. Circuit breakers. Test methodsCentrifugal acceleration
BS EN 3841-509:2004. Aerospace series. Circuit breakers. Test methodsInsertion and extraction forces of signal contact terminals
BS EN 3841-510:2004. Aerospace series. Circuit breakers. Test methodsStrength of signal contact terminals
BS EN 3841-511:2004. Aerospace series. Circuit breakers. Test methodsCombined test: temperature, altitude and vibration
BS EN 3842:2001. Aerospace series. Circular tubes for fluids in corrosion resistant steel. Diameter 3,2 mm ≤ D ≤ 100 mm. Thickness 0,32 mm ≤ a ≤ 2,5 mm. Dimensions
BS EN 3843:2010. Aerospace series. Nuts, bihexagonal, self-locking, with counterbore, in heat resisting steel, passivated. Classification: 1100 MPa (at ambient temperature)/650°C
BS EN 3844-1:2011. Aerospace series. Flammability of non metallic materialsSmall burner test, vertical. Determination of the vertical flame propagation
BS EN 3844-2:2011. Aerospace series. Flammability of non metallic materialsSmall burner test, horizontal. Determination of the horizontal flame propagation
BS EN 3844-3:2011. Aerospace series. Flammability of non metallic materialsSmall burner test, 45°. Determination of the resistance of material to flame and glow propagation and to flame penetration
BS EN 3848:2001. Aerospace series. Semi-finished metallic products. Methods of measuring form deviations
BS EN 385:1995. Finger jointed structural timber. Performance requirements and minimum production requirements
BS EN 385:2001. Finger jointed structural timber. Performance requirements and minimum production requirements
BS EN 3851:2003. Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Swivel nuts, straight
BS EN 3852:2002. Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Straight unions, welded, threaded
BS EN 3853:2002. Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Straight unions, threaded
BS EN 3854:2002. Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Ferrules, welded
BS EN 3855:2002. Aerospace series. Pipe couplings, 60° spherical, in titanium alloy TI-P64001. Caps
BS EN 3856:2002. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Swivel nuts for thrust wire
BS EN 3857:2002. Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Elbows 90°, welded
BS EN 3858:2002. Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Thrust wires in steel FE-PA 13
BS EN 386:1995. Glued laminated timber. Performance requirements and minimum production requirements
BS EN 386:2001. Glued laminated timber. Performance requirements and minimum production requirements
BS EN 3861:2013. Aerospace series. Non-metallic materials. Glass transparencies. Material standard. Thermally tempered soda lime float glass
BS EN 3862:2013. Aerospace series. Non-metallic materials. Glass transparencies. Material standard. Chemically tempered soda lime float glass
BS EN 3863:2013. Aerospace series. Non-metallic materials. Glass transparencies. Test methods. Determination of flatness
BS EN 3864:2013. Aerospace series. Non-metallic materials. Glass transparencies. Test methods. Determination of modulus of rupture
BS EN 3866:2013. Aerospace series. Non-metallic materials. Glass tranparencies. Test methods. Determination of ream and surface ripple
BS EN 3867:2003. Aerospace series. Pipe couplings, loose flanges and seals. Flanges in titanium alloy TI-P64001
BS EN 3867:2004. Aerospace series. Pipe couplings, loose flanges and seals. Flanges in titanium alloy TI-P64001
BS EN 3868:2003. Aerospace series. Pipe couplings, loose flanges and seals. Flange connectors, welded, in titanium alloy TI-P64001
BS EN 3868:2004. Aerospace series. Pipe couplings, loose flanges and seals. Flange connectors, welded, in titanium alloy TI-P64001
BS EN 3869:2003. Aerospace series. Pipe couplings, loose flanges and seals. Seals in fluorocarbon rubber and armature in aluminium alloy
BS EN 3869:2004. Aerospace series. Pipe couplings, loose flanges and seals. Seals in fluorocarbon rubber and armature in aluminium alloy
BS EN 387:2001. Glued laminated timber. Large finger joints. Performance requirements and minimum production requirements
BS EN 3872:2005. Aerospace series. Aluminium alloy AL-R39002-H112. Die forgings. a ≤ 200mm
BS EN 3873:2010. Aerospace series. Test methods for metallic materials. Determination of fatigue crack growth rates using corner-cracked (CC) test pieces
BS EN 388:1994. Protective gloves against mechanical risks
BS EN 388:2003. Protective gloves against mechanical risks
BS EN 3882:2001. Aerospace series. Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2). Filler wire for welding
BS EN 3883:2001. Aerospace series. Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2). Filler metal for welding
BS EN 3884:2001. Aerospace series. Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti). Filler metal for welding
BS EN 3885:2001. Aerospace series. Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4). Filler metal for welding
BS EN 3886:2001. Aerospace series. Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al). Filler metal for welding
BS EN 3887:2001. Aerospace series. Heat resisting alloy CO-WH4101 (CoCr20W15Ni). Filler metal for welding
BS EN 3888:2001. Aerospace series. Heat resisting alloy CO-WH1402 (CoCr22Ni22W15). Filler metal for welding
BS EN 3889:2002. Aerospace series. Steel FE-WM3801 (X5CrNiCu17-4). Filler metal for welding
BS EN 3890:2002. Aerospace series. Steel FE-WM1502 (X11CrNiMoVN12-3). Filler metal for welding
BS EN 3892:2001. Aerospace series. Titanium alloy TI-W64001. Filler metal for welding
BS EN 3893:2001. Aerospace series. Titanium alloy TI-W19001. Filler metal for welding
BS EN 3894:2001. Aerospace series. Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5). Filler metal for welding
BS EN 3895:2001. Aerospace series. Heat resisting alloy NI-WH3901 (NiCr16Mo15). Filler metal for welding
BS EN 3896:2002. Aerospace series. Steel FE-WM1501 (X13CrNiMoCo12-3-2-2. Filler metal for welding
BS EN 3897:2002. Aerospace series. Steel FE-WA4801 (X6CrNiMnNb18-10). Filler metal for welding
BS EN 3899:2003. Aerospace series. Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FE-PM3801 (17-4PH). Technical specification
BS EN 3899:2004. Aerospace series. Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FE-PM3801 (17-4PH). Technical specification
BS EN 39:2001. Loose steel tubes for tube and coupler scaffolds. Technical delivery conditions
BS EN 3-9:2006. Portable fire extinguishersAdditional requirements to EN 3-7 for pressure resistance of CO2 extinguishers
BS EN 390:1995. Glued laminated timber. Sizes. Permissible deviations
BS EN 3905:2008. Aerospace series. Six lobe recesses for bolts. Technical specification
BS EN 3909:2007. Aerospace series. Test fluids and test methods for electric components and sub-assemblies
BS EN 391:1995. Glued laminated timber. Delamination of glue lines
BS EN 391:2002. Glued laminated timber. Delamination test of glue lines
BS EN 3911:2010. Aerospace series. Six lobe recess. Geometrical definition
BS EN 3912:2007. Aerospace series. Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting steel FE-PA2601 (FE-PA92HT, A286), silver plated. Classification: 1100 MPa (at ambient temperature) / 650°C
BS EN 3913:2007. Aerospace series. Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (Ni-P100HT, Inconel 718), silver plated on internal thread, for salvage of components
BS EN 3914:2008. Aerospace series. Insert, thin wall, self-locking, long, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), silver plated on internal thread, for salvage of components
BS EN 3915:2008. Aerospace series. Insert, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), for salvage of components. Classification: 1275 MPa (at ambient temperature) / 550°C. Technical specification
BS EN 3916:2008. Aerospace series. Insert, thin wall. Salvage procedure for components
BS EN 3917:1998. Nickel base alloy NI-B41201 (NiCr14Si5B3C). Filler metal for brazing. Powder or paste
BS EN 3918:1998. Nickel base alloy NI-B41201 (NiCr14Si5B3C). Filler metal for brazing. Tape
BS EN 3919:1998. Nickel base alloy NI-B41202 (NiCr14Si5B3). Filler metal for brazing. Amorphous foil
BS EN 392:1995. Glued laminated timber. Shear test of glue lines
BS EN 3920:2001. Aerospace series. Nickel base alloy NI-B41202 (NiCr14Fe5Si5B3). Filler metal for brazing. Powder or paste
BS EN 3921:2001. Aerospace series. Nickel base alloy NI-B41203 (NiCr7Si5B3). Filler metal for brazing. Amorphous foil
BS EN 3922:1998. Nickel base alloy NI-B41203 (NiCr7Si5B3). Filler metal for brazing. Borided foil
BS EN 3923:2001. Aerospace series. Nickel base alloy NI - B41203 (NiCr7Si5B3Fe3). Filler metal for brazing. Powder or paste
BS EN 3924:1998. Nickel base alloy NI-B41203 (NiCr7Si5B3). Filler metal for brazing. Tape
BS EN 3925:2001. Aerospace series. Nickel base alloy NI-B40001 (NiSi5B3). Filler metal for brazing. Amorphous foil
BS EN 3926:2001. Aerospace series. Nickel base alloy NI-B40001 (NiSi5B3). Filler metal for brazing. Borided foil
BS EN 3927:2001. Aerospace series. Nickel base alloy NI-B40001 (NiSi5B3). Filler metal for brazing. Powder or paste
BS EN 3928:1998. Nickel base alloy NI-B40001 (NiSi5B3). Filler metal for brazing. Tape
BS EN 393:1994. Lifejackets and personal buoyancy aids. Buoyancy aid 50
BS EN 3930:2001. Aerospace series. Nickel base alloy NI-B31001 (NiCr19Si10). Filler metal for brazing. Powder or paste
BS EN 3931:1998. Nickel base alloy NI-B31001 (NiCr19Si10). Filler metal for brazing. Tape
BS EN 3932:2001. Aerospace series. Nickel base alloy NI-B13001 (NiP11). Filler metal for brazing. Amorphous foil
BS EN 3933:2001. Aerospace series. Nickel base alloy NI-B13001 (NiP11). Filler metal for brazing. Powder or paste
BS EN 3934:2001. Aerospace series. Nickel base alloy NI-B21001 (NiCr15B4). Filler metal for brazing. Amorphous foil
BS EN 3935:2001. Aerospace series. Nickel base alloy NI-B21001 (NiCr15B4). Filler metal for brazing. Borided foil
BS EN 3936:2001. Aerospace series. Nickel base alloy NI-B21001 (NiCr15B4). Filler metal for brazing. Powder or paste
BS EN 3937:2001. Aerospace series. Nickel base alloy NI-B44101 (NiW12Cr10Si4Fe3B3). Filler metal for brazing. Powder or paste
BS EN 3938:2001. Aerospace series. Nickel base alloy NI-B46001 (NiCo20Si5B3) Filler metal for brazing. Amorphous foil
BS EN 3939:2001. Aerospace series. Nickel base alloy NI-B46001 (NiCo20Si5B3). Filler metal for brazing. Powder or paste
BS EN 394:1994. Lifejackets and personal buoyancy aids. Additional items
BS EN 3940:1998. Nickel base alloy NI-B46001 (NiCo20Si5B3). Filler metal for brazing. Tape
BS EN 3941:2001. Aerospace series. Nickel base alloy NI-B41204 (NiCr13Si4B3). Filler metal for brazing. Amorphous foil
BS EN 3942:2001. Aerospace series. Nickel base alloy NI-B41204 (NiCr13Si4B3). Filler metal for brazing. Borided foil
BS EN 3943:2001. Aerospace series. Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3). Filler metal for brazing. Powder or paste
BS EN 3944:1998. Nickel base alloy NI-B41204 (NiCr13Si4B3). Filler metal for brazing. Tape
BS EN 3945:2001. Aerospace series. Nickel base alloy NI-B48801 (NiMn19Si6Cu4B). Filler metal for brazing. Powder or paste
BS EN 3946:2001. Aerospace series. Nickel base alloy NI-B15701 (NiPd34Au30). Filler metal for brazing. Powder or paste
BS EN 3947:1998. Nickel base alloy NI-B15701 (NiPd34Au30). Filler metal for brazing. Rolled foil
BS EN 3948:1998. Nickel base alloy NI-B15701 (NiPd34Au30). Filler metal for brazing. Wire
BS EN 395:1995. Lifejackets and personal buoyancy aids. Lifejacket 100
BS EN 3952:2001. Aerospace series. Silver base alloy AG-B10001 (AgCu28). Filler metal for brazing. Wire
BS EN 3953:2001. Aerospace series. Silver base alloy AG-B12401 (AgCu40Zn5Ni). Filler metal for brazing. Wire
BS EN 3954:2001. Aerospace series. Silver base alloy AG-B12401 (AgCu40Zn5Ni). Filler metal for brazing. Powder or paste
BS EN 3955:2001. Aerospace series. Silver base alloy AG-B12401 (AgCu40Zn5Ni). Filler metal for brazing. Rolled foil
BS EN 3956:2001. Aerospace series. Silver base alloy AG-B14001 (AgCu42Ni2). Filler metal for brazing. Wire
BS EN 3957:2001. Aerospace series. Silver base alloy AG-B14001 (AgCu42Ni2). Filler metal for brazing. Powder or paste
BS EN 3958:2001. Aerospace series. Silver base alloy AG-B14001 (AgCu42Ni2). Filler metal for brazing. Rolled foil
BS EN 3959:2001. Aerospace series. Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4). Filler metal for brazing. Powder or paste
BS EN 396:1994. Lifejackets and personal buoyancy aids. Lifejacket 150
BS EN 3960:2001. Aerospace series. Gold base alloy AU-B40001 (AuNi18). Filler metal for brazing. Powder or paste
BS EN 3961:2001. Aerospace series. Gold base alloy AU-B4000. Filler metal for brazing. Rolled foil
BS EN 3962:2001. Aerospace series. Gold base alloy AU-B40001. Filler metal for brazing. Wire
BS EN 3963:2001. Aerospace series. Copper CU-BU9001. Filler metal for brazing. Rolled foil
BS EN 3964:2001. Aerospace series. Copper CU-BU9001. Filler metal for brazing. Wire
BS EN 3965:2001. Aerospace series. Titanium alloy TI-B17001. Filler metal for brazing. Rolled foil
BS EN 3969:2006. Aerospace series. Steel FE-PL1507 (40CrMoV12). Air melted. Annealed. Forging stock. a or D ≤ 350 mm
BS EN 397:1995. Specification for industrial safety helmets
BS EN 397:2012+A1:2012. Industrial safety helmets
BS EN 3971:2006. Aerospace series. Steel FE-PL1507 (40CrMoV12). Consumable electrode remelted. Annealed. Forging stock. a or D ≤ 350 mm
BS EN 3972:2006. Aerospace series. Steel FE-PL1507 (40CrMoV12). Consumable electrode remelted. Hardened and tempered. Bar for machining. De ≤ 50 mm. 1250 MPa ≤ Rm ≤ 1400 MPa
BS EN 3973:2006. Aerospace series. Steel FE-CM3801 (X5CrNiCuNb16-4). Homogenized, solution treated and precipitation hardened. Investment casting. De ≤ 50 mm. Rm ≥ 1030 MPa
BS EN 3976:2006. Aerospace series. Titanium and titanium alloys. Test method. Chemical analysis for the determination of hydrogen content
BS EN 3979:2005. Aerospace series. Aluminium alloy AL-P8090-O2. Sheet for superplastic forming (SPF). 0,8 mm ≤ a ≤ 6 mm
BS EN 3983:2013. Aerospace series. Aluminium alloy AL-P7050-. T7651. Plate. 6 mm < a ≤ 160 mm
BS EN 3987:2009. Aerospace series. Test methods for metallic materials. Constant amplitude force-controlled high cycle fatigue testing
BS EN 399:1994. Lifejackets and personal buoyancy aids. Lifejacket 275
BS EN 3997:2007. Aerospace series. Aluminium alloy AL-P2024-T3. Sheet and strip 0,4 mm $3Q a $3Q 6 mm
BS EN 3998:2007. Aerospace series. Aluminium alloy AL-P2024-T4 or T42. Sheet and strip. 0,3 mm ≤ a ≤ 6 mm
BS EN 3999:2007. Aerospace series. Aluminium alloy AL-P2024-T351. Sheet and strip with improved chemical milling capability 1,6 mm ≤ a ≤ 6 mm
BS EN 400:1993. Respiratory protective devices for self-rescue. Self-contained closed-circuit breathing apparatus. Compressed oxygen escape apparatus. Requirements, testing, marking
BS EN 4000:2002. Aerospace series. Metallic materials. Rules for the drafting and presentation of dimensional standards for metallic semi-finished products
BS EN 4001:2007. Aerospace series. Aluminium alloy AL-P2024-T351. Clad sheet and strip with improved chemical milling capability 1,6 mm ≤ a ≤ 6 mm
BS EN 4002:2007. Aerospace series. Aluminium alloy AL-P2219-T81. Sheet and strip 0,5 mm ≤ a ≤ 6 mm
BS EN 4003:2006. Aerospace series. Aluminium alloy AL-P2219-T87. Sheet and strip 0,5 mm ≤ a ≤ 6 mm
BS EN 4004:2007. Aerospace series. Aluminium alloy AL-P3103-H16. Sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 4005:2007. Aerospace series. Aluminium alloy AL-P5052-O. Sheet and strip 0,3 mm ≤ a ≤ 6 mm
BS EN 4006:2007. Aerospace series. Aluminium alloy AL-P6082-T4 or T42. Sheet and strip 0,4 mm ≤ a ≤ 6 mm
BS EN 4007:2005. Aerospace series. Aluminium alloy AL-P6082-T6 or T62. Sheet and strip. 0,4 mm 3L a 3L 6 mm
BS EN 4008-001:2006. Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessoriesTechnical specification
BS EN 4008-002:2006. Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessoriesList of product standards
BS EN 4008-005:2006. Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessoriesPositioner for crimping tool M22520/2-01. Product standard
BS EN 4008-006:2006. Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessoriesPositioner for crimping tool M22520/7. Product standard
BS EN 4008-007:2006. Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessoriesPositioner for crimping tool M22520/2-01. Product standard
BS EN 4008-007:2011. Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessoriesPositioner for crimping tool M22520/2-01. Product standard
BS EN 4008-008:2006. Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessoriesPositioner for crimping tool M22520/7-01. Product standard
BS EN 4008-008:2011. Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessoriesPositioner for crimping tool M22520/7-01. Product standard
BS EN 4008-011:2006. Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessoriesPositioner for crimping tool M22520/2-01. Product standard
BS EN 4008-012:2006. Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessoriesPositioner for crimping tool M22520/2-01. Product standard
BS EN 4008-013:2006. Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessoriesPositioner for crimping tool M22520/2-01. Product standard
BS EN 4008-014:2006. Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessoriesTurret for crimping tool M22520/31-01. Product standard
BS EN 4008-015:2007. Aerospace series. Elements of electrical and optical connection. Crimping tool and associated accessoriesPositioner for crimping tool M22520/2-01. Product standard
BS EN 4008-017:2006. Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessoriesHead for crimping tool M22520/4-01. Product standard
BS EN 4009:2003. Aerospace series. Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classification: 1550 MPa (at ambient temperature)/650 °C
BS EN 4009:2004. Aerospace series. Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1550 MPa (at ambient temperature)
BS EN 40-1:1992. Lighting columnsDefinitions and terms
BS EN 4011:2003. Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy TI-P100HT (Inconel 718), silver plated. Classification: 1550 MPa (at ambient temperature)/600°C
BS EN 4011:2004. Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification: 1550 MPa (at ambient temperature)/600°C
BS EN 4012:2003. Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P100HT (Inconel 718), MoS2 coated. Classification: 1500 MPa (at ambient temperature)/425°C
BS EN 4013:2003. Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated. Classification: 1550 MPa (at ambient temperature)/600°C
BS EN 4013:2004. Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification: 1550 MPa (at ambient temperature) / 600°C
BS EN 4014:2003. Aerospace series. Inserts, thickwall, self-locking. Design standard
BS EN 4014:2004. Aerospace series. Inserts, thickwall, self-locking. Design standard
BS EN 4015:2003. Aerospace series. Inserts, thickwall, self-locking. Installation and removal procedure
BS EN 4015:2004. Aerospace series. Inserts, thickwall, self-locking. Installation and removal procedure
BS EN 4017:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90°
BS EN 4018:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90° with thrust wire nut
BS EN 4018:2009. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90° with thrust wire nut
BS EN 4019:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90°, welded
BS EN 402:1993. Specification for respiratory protective devices for escape. Self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly.
BS EN 402:2003. Respiratory protective devices. Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape. Requirements, testing, marking
BS EN 40-2:2004. Lighting columnsGeneral requirements and dimensions
BS EN 4020:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90°, welded end with thrust wire nut
BS EN 4020:2009. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90°, welded end with thrust wire nut
BS EN 4021:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90°, bulkhead
BS EN 4022:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90°, bulkhead, welded end
BS EN 4023:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 45°
BS EN 4023:2010. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 45°
BS EN 4024:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 45° welded end with thrust wire nut
BS EN 4024:2009. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 45° welded end with thrust wire nut
BS EN 4025:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 45°, bulkhead
BS EN 4025:2010. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 45°, bulkhead
BS EN 4026:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees
BS EN 4027:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees branch with thrust wire nut
BS EN 4028:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees with thrust wire nut on run
BS EN 4029:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees bulkhead branch
BS EN 403:1993. Specification for filtering respiratory protective devices with hood for self-rescue from fire
BS EN 403:2004. Respiratory protective devices for self-rescue. Filtering devices with hood for escape from fire. Requirements, testing, marking
BS EN 4030:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees bulkhead on run
BS EN 40-3-1:2000. Lighting columns. Design and verificationSpecification for characteristic loads
BS EN 4031:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Nut for welded union
BS EN 40-3-1:2013. Lighting columnsDesign and verification. Specification for characteristic loads
BS EN 40-3-2:2000. Lighting columns. Design and verificationVerification by testing
BS EN 4032:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Thrust wire
BS EN 40-3-2:2013. Lighting columnsDesign and verification. Verification by testing
BS EN 40-3-3:2003. Lighting columns. Design and verificationVerification by calculation
BS EN 4033:2007. Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 8 and 9, reduced internal radial clearance. Dimensions and loads
BS EN 40-3-3:2013. Lighting columnsDesign and verification. Verification by calculation
BS EN 4034:2007. Aerospace series. Bearings, airframe rolling. Double row self-aligning ball bearings with flanged outer ring in corrosion resisting steel, reduced internal radial clearance. Dimensions and loads
BS EN 4035:2006. Aerospace series. Rod ends, adjustable with self-aligning double row ball bearing in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy. Dimensions and loads
BS EN 4036:2006. Aerospace series. Rod ends, adjustable with self-aligning double row ball bearing and threaded shank in corrosion resisting steel, reduced internal radial clearance. Dimensions and loads
BS EN 404:1993. Specification for respiratory protective devices for self-rescue: filter self-rescuer
BS EN 40-4:2005. Lighting columnsRequirements for reinforced and prestressed concrete lighting columns
BS EN 404:2005. Respiratory protective devices for self-rescue. Filter self-rescuer from carbon monoxide with mouthpiece assembly
BS EN 4040:2006. Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring. Elevated loads at ambient temperature. Dimensions and loads
BS EN 4041:2006. Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel, with extended inner ring and flanged alignment bush. Dimensions and loads
BS EN 4045:2001. Aerospace series. Capillary tubes, seamless in heat resisting alloys. Diameter 0,6 mm ≤ D ≤ 2 mm. Dimensions
BS EN 4047:2003. Aerospace series. Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification: 1550 MPa (at ambient temperature)/600°C. Technical specification
BS EN 4047:2004. Aerospace series. Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification: 1550MPa (at ambient temperature)/600°C. Technical specification
BS EN 4048:2003. Aerospace series. Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated. Classification: 1550 MPa (at ambient temperature) / 425 °C. Technical specification
BS EN 4049-001:2006. Aerospace series. Thermocouple extension cable. Operating temperatures between -65°C and 260°CTechnical specification
BS EN 4049-002:2005. Aerospace series. Thermocouple extension cable. Operating temperatures between -65°C and 260°CGeneral
BS EN 4049-003:2006. Aerospace series. Thermocouple extension cable. Operating temperatures between -65°C and 260°CSingle core nickel chromium/nickel aluminium. Product standard
BS EN 4049-004:2006. Aerospace series. Thermocouple extension cable. Operating temperatures between -650DC and 260°CTwo core nickel chromium/nickel aluminium shielded and jacketed. Product standard
BS EN 405:1993. Respiratory protective devices. Valved filtering half masks to protect against gases or gases and particles
BS EN 40-5:2000. Lighting columnsSpecification for steel lighting columns
BS EN 405:2001+A1:2009. Respiratory protective devices. Valved filtering half masks to protect against gases or gases and particles. Requirements, testing, marking
BS EN 40-5:2002. Lighting columnsRequirements for steel lighting columns
BS EN 4050-1:2012. Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgingsGeneral requirements
BS EN 4050-2:2012. Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgingsPerformance of test
BS EN 4050-3:2012. Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgingsReference blocks
BS EN 4050-4:2012. Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgingsAcceptance criteria
BS EN 4051:2002. Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy. Port connection
BS EN 4054:2003. Aerospace series. Pipe couplings, loose flanges and seals. Seals in fluorocarbon rubber and armature in aluminium alloy. Technical specification
BS EN 4054:2004. Aerospace series. Pipe couplings, loose flanges and seals. Seals in fluorocarbon rubber and armature in aluminium alloy. Technical specification
BS EN 4056-001:2006. Aerospace series. Cable ties for harnessesTechnical specification
BS EN 4057-100:2006. Aerospace series. Cable ties for harnesses. Test methodsGeneral
BS EN 4057-201:2005. Aerospace series. Cable ties for harnesses. Test methodsVisual examination
BS EN 4057-202:2005. Aerospace series. Cable ties for harnesses. Test methodsExamination of mass and dimensions
BS EN 4057-301:2005. Aerospace series. Cable ties for harnesses. Test methodsSalt mist test
BS EN 4057-302:2006. Aerospace series. Cable ties for harnesses. Test methodsFlammability
BS EN 4057-303:2005. Aerospace series. Cable ties for harnesses. Test methodsResistance to fluids
BS EN 4057-304:2006. Aerospace series. Cable ties for harnesses. Test methodsLoop tensile strength at maximum working temperature
BS EN 4057-305:2005. Aerospace series. Cable ties for harnesses. Test methodsColour fastness
BS EN 4057-306:2006. Aerospace series. Cable ties for harnesses. Test methodsHeat ageing test
BS EN 4057-307:2006. Cable ties for harnesses. Test methodsResistance to ultra violet radiation
BS EN 4057-401:2006. Aerospace series. Cable ties for harnesses. Test methodsLoop tensile strength
BS EN 4057-402:2006. Aerospace series. Cable ties for harnesses. Test methodsLife cycle
BS EN 4057-404:2006. Aerospace series. Cable ties for harnesses. Test methodsLow temperature installation
BS EN 4057-405:2005. Aerospace series. Cable ties for harnesses. Test methodsCompass safe distance
BS EN 4057-406:2006. Aerospace series. Cable ties for harnesses. Test methodsLocking device retention
BS EN 4057-407:2005. Aerospace series. Cable ties for harnesses. Test methodsVerification of application tool settings
BS EN 4058:2001. Aerospace series. Filler rods and filler wires for welding in titanium and titanium alloys. Diameter 0,5 mm ≤ D ≤ 5,0 mm. Dimensions
BS EN 4059:2001. Aerospace series. Filler rods and filler wire for welding in steel. Diameter 0,5 mm ≤ D ≤ 5,0 mm. Dimensions
BS EN 40-6:2000. Lighting columnsSpecification for aluminium lighting columns
BS EN 40-6:2002. Lighting columnsRequirements for aluminium lighting columns
BS EN 4060:2001. Aerospace series. Filler rods and filler wires for welding in heat resisting alloys. Diameter 0,5 mm ≤ D ≤ 5,0 mm. Dimensions
BS EN 4069:1996. Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated. Classification: 600MPa (at ambient temperature)/650°C
BS EN 407:1994. Protective gloves against thermal risks (heat and/or fire)
BS EN 40-7:2002. Lighting columnsRequirements for fibre reinforced polymer composite lighting columns
BS EN 407:2004. Protective gloves against thermal risks (heat and/or fire)
BS EN 4071:2009. Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature) / 425 °C
BS EN 4072:2009. Aerospace series. Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature) / 425 °C
BS EN 4073:2009. Aerospace series. Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification 1100 MPa (at ambient temperature) / 235°C
BS EN 4074:2009. Aerospace series. Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature)/425°C
BS EN 4075:2008. Aerospace series. Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated. Classification: 490 MPa (at ambient temperature) / 425 °C
BS EN 4078:2009. Aerospace series. Inserts, threaded, thin wall, locked and self-locking, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature) / 315°C
BS EN 408:1995. Timber structures. Structural timber and glued laminated timber. Determination of some physical and mechanical properties
BS EN 408:2003. Timber structures. Structural timber and glued laminated timber. Determination of some physical and mechanical properties
BS EN 408:2010+A1:2012. Timber structures. Structural timber and glued laminated timber. Determination of some physical and mechanical properties
BS EN 4084:2009. Aerospace series. Nuts, anchor, self-locking, fixed, two lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature) / 235°C
BS EN 4085:2001. Aerospace series. Nickel base alloy NI-B40002 (NiSi4B2). Filler metal for brazing. Amorphous foil
BS EN 409:1993. Timber structures. Test methods. Determination of the yield moment of dowel type fasteners. Nails
BS EN 409:2009. Timber structures. Test methods. Determination of the yield moment of dowel type fasteners
BS EN 4098:2007. Aerospace series. Steel FE-PL1507 (40CrMoV12). Remelted, hardened and tempered, forgings De ≤ 50 mm, 1250 MPa ≤ Rm ≤ 1400 MPa
BS EN 4099:2005. Aerospace series. Aluminium alloy AL-P2219-T6 or T62. Clad sheet and strip. 0,5 mm ≤ a ≤ 6 mm
BS EN 410:1998. Glass in building. Determination of luminous and solar characteristics of glazing
BS EN 410:2011. Glass in building. Determination of luminous and solar characteristics of glazing
BS EN 4100:2005. Aerospace series. Aluminium alloy AL-P2219-T6 or T62. Sheet and strip. 0,5 mm ≤ a ≤ 6 mm
BS EN 41003:1991. Particular safety requirements for equipment to be connected to telecommunication networks
BS EN 41003:1993. Particular safety requirements for equipment to be connected to telecommunication networks
BS EN 41003:1997. Particular safety requirements for equipment to be connected to telecommunication networks
BS EN 41003:1999. Particular safety requirements for equipment to be connected to telecommunications networks
BS EN 41003:2009. Particular safety requirements for equipment to be connected to telecommunication networks and/or a cable distribution system
BS EN 4101:2005. Aerospace series. Aluminium alloy AL-P2024-T4. Sheet and strip with improved stretch forming capability. 0,4 mm ≤ a ≤ 6 mm
BS EN 4102:2005. Aerospace series. Aluminium alloy AL-P2219-T81. Clad sheet and strip. 0,5 mm ≤a ≤6 mm
BS EN 4103:2001. Aerospace series. Nickel base alloy NI-B40002 (NiSi4B2). Filler metal for brazing. Borided foil
BS EN 4104:2001. Aerospace series. Nickel base alloy NI-B40002. Filler metal for brazing. Powder or paste.
BS EN 4105:1998. Nickel base alloy NI-B40002 (NiSi4B2). Filler metal for brazing. Tape
BS EN 4106:2013. Aerospace series. Non-metallic materials. Structural adhesive systems. Paste adhesive. Technical specification
BS EN 4108:2006. Aerospace series. Wrenches, crow foot, attachment socket, socket drive
BS EN 4109:2006. Aerospace series. Wrenches, face spanner
BS EN 411:1995. Sanitary tapware. Waste fittings for sinks. General technical specifications
BS EN 4110:2006. Aerospace series. Wrenches, open end, box
BS EN 4111:2006. Aerospace series. Wrenches, splined, sockets, for pipe fittings. Technical specification
BS EN 4113:2001. Aerospace series. Clamps, loop (P type) in corrosion resisting steel with rubber cushioning. Dimensions and masses
BS EN 4113:2009. Aerospace series. Clamps, loop ("P" type) in corrosion resisting steel, passivated, with rubber cushioning. Dimensions, masses
BS EN 4114:2001. Aerospace series. Clamps, loop ("P" type) in aluminium alloy with rubber cushioning. Dimensions and masses
BS EN 4114:2009. Aerospace series. Clamps, loop (''P'' type) in aluminium alloy with rubber cushioning. Dimensions, masses
BS EN 4115:2001. Aerospace series. Cushion, rubber for clamps. Dimensions, masses
BS EN 4115:2010. Aerospace series. Cushion, rubber for clamps. Dimensions, masses
BS EN 4116:2003. Aerospace series. Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread. Classification: 1100 MPa (at ambient temperature)/425°C
BS EN 4116:2004. Aerospace series. Nuts, hexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread. Classification: 1100 MPa (at ambient temperature) / 425°C
BS EN 4117:2003. Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH 2601 (Inconel 718), silver plated on thread. Classification: 1550 MPa (at ambient temperature)/600°C
BS EN 4117:2004. Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread. Classification: 1550 MPa (at ambient temperature) / 600°C
BS EN 4118:2003. Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread. Classification: 1100 MPa (at ambient temperature) / 650$0C
BS EN 4118:2004. Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread. Classification: 1100 MPa (at ambient temperature) / 650°C
BS EN 4119:2003. Aerospace series. Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated on thread. Classification: 1100 MPa (at ambient temperature) / 650°C
BS EN 4119:2004. Aerospace series. Nuts, bihexagonal, self-locking, deep counterbore, in heat resisting steel FE-PA2601 (A286), silver plated on thread. Classification: 1100 MPa (at ambient temperature) / 650°C
BS EN 412:1993. Specification for protective aprons for use with hand knives
BS EN 4120:2004. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread. Classification: 1210 MPa (at ambient temperature) / 730°C
BS EN 4121:2003. Aerospace series. Shank nuts, serrated, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread. Classification: 1100 MPa (at ambient temperature)/650°C
BS EN 4121:2004. Aerospace series. Shank nuts, serrated, self-locking, in heat resisting steel FE- A2601 (A286), silver plated on thread. Classification: 1100 MPa (at ambient temperature) /650°C
BS EN 4122:2003. Aerospace series. Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread. Classification: 1100 MPa (at ambient temperature)/650°C
BS EN 4122:2004. Aerospace series. Shank nuts, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread. Classification: 1100 MPa (at ambient temperature)/650°C
BS EN 4123:2003. Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread. Classification: 1550 MPa (at ambient temperature)/600°C
BS EN 4123:2004. Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread. Classification:1550 MPa (at ambient temperature) / 600°C
BS EN 4124:2003. Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH-1302 (Waspaloy), silver plated on thread, for 60 swage. Classification: 1210 MPa (at ambient temperature)/730°C
BS EN 4124:2004. Aerospace series. Shank nuts, self-locking, heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60° swage. Classification. 1 210 MPa (at ambient temperature) / 730°C
BS EN 4125:2010. Aerospace series. Nuts, anchor, self-locking, fixed, two lug, reduced series, with incremental counterbore, in heat resisting steel, MoS2 lubricated. Classification: 900 MPa (at ambient temperature)/315°C
BS EN 4126:2010. Aerospace series. Nuts, anchor, self-locking, floating, two lug, reduced series, with incremental counterbore, in heat resisting steel, MoS2 lubricated. Classification: 900 MPa (at ambient temperature)/315°C
BS EN 4127:2009. Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature)/ 425 °C
BS EN 4128:2009. Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification: 1250 MPa (at ambient temperature) / 425 °C
BS EN 4129:2009. Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) / 235°C
BS EN 4130:2009. Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature) / 425 °C
BS EN 413-1:2004. Masonry cementComposition, specifications and conformity criteria
BS EN 4131:2009. Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification: 1250 MPa (at ambient temperature) / 425 °C
BS EN 413-1:2011. Masonry cementComposition, specifications and conformity criteria
BS EN 413-2:1995. Masonry cementTest methods
BS EN 413-2:2005. Masonry cementTest methods
BS EN 4132:2009. Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C
BS EN 4133:2009. Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature) / 425 °C
BS EN 4134:2009. Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification: 1250 MPa (at ambient temperature)/425°C
BS EN 4135:2009. Aerospace series. Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C
BS EN 4136:2009. Aerospace series. Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa at ambient temperature)/235°C
BS EN 4137:2009. Aerospace series. Bolts, normal bi-hexagonal head, stepped shank, long thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C
BS EN 4138:2009. Aerospace series. Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) / 235°C
BS EN 414:1992. Safety of machinery. Rules for the drafting and presentation of safety standards
BS EN 414:2000. Safety of machinery. Rules for the drafting and presentation of safety standards
BS EN 415-1:2000+A1:2009. Packaging machines safetyTerminology and classification of packaging machines and associated equipment
BS EN 415-2:2000. Safety of packaging machinesPre-formed rigid container packaging machines
BS EN 415-3:1999+A1:2009. Safety of packaging machinesForm, fill and seal machines
BS EN 415-4:1998. Safety of packaging machinesPalletizers and depalletizers
BS EN 415-5:2006+A1:2009. Safety of packaging machinesWrapping machines
BS EN 415-6:2006+A1:2009. Safety of packaging machinesPallet wrapping machines
BS EN 415-6:2013. Safety of packaging machinesPallet wrapping machines
BS EN 415-7:2006+A1:2008. Safety of packaging machinesGroup and secondary packaging machines
BS EN 4158:2006. Aerospace series. Paints and varnishes. Test method for measurement of electrical surface resistance of conductive layers
BS EN 415-8:2008. Safety of packaging machinesStrapping machines
BS EN 415-9:2009. Safety of packaging machinesNoise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3
BS EN 4159:2011. Aerospace series. Paints and Varnishes. Determination of resistance to microbial growth
BS EN 4160:2011. Aerospace series. Paints and varnishes. Determination of the effect of thermal exposure
BS EN 416-1:1999. Single burner gas-fired overhead radiant-tube heatersSafety
BS EN 4161:2009. Aerospace series. Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) / 235 °C
BS EN 416-1:2009. Single burner gas-fired overhead radiant tube heaters for non-domestic useSafety
BS EN 416-2:2006. Single burner gas-fired overhead radiant tube heaters for non-domestic useRational use of energy
BS EN 4162:2009. Aerospace series. Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. 1100 MPa (at ambient temperature) / 235°C
BS EN 4163:2009. Aerospace series. Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. 1100 MPa (at ambient temperature) / 235°C
BS EN 4165-001:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuousTechnical specification
BS EN 4165-002:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuousSpecification of performance and contact arrangements
BS EN 4165-003:2008. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuousModules series 2 and series 3. Product standard
BS EN 4165-004:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuousStackable mounting receptacle 2 and 4 modules, series 2. Product standard
BS EN 4165-005:2007. Aerospace series. Connectors, electrical, rectangular, Modular. Operating temperatures 175 °C continuousStackable receptacle 2 and 4 modules, series 3. Product standard
BS EN 4165-006:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuousPlug for 2 and 4 modules, series 2. Product standard
BS EN 4165-007:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuousPlug for 2 and 4 modules, series 3. Product standard
BS EN 4165-008:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuousRack and panel plug for 2 and 4 modules, series 2. Product standard
BS EN 4165-009:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuousRack and panel plug for 2 and 4 modules, series 3. Product standard
BS EN 4165-010:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuousRack and panel rear mounted plug for 2 and 4 modules, series 2. Product standard
BS EN 4165-011:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuousFlange mounting receptacle 2 and 4 modules, series 2. Product standard
BS EN 4165-012:2005. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuousFlange mounting receptacle 2 or 4 modules, series 3. Product standard
BS EN 4165-013:2005. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuousCable clamp 2 and 4 modules for connectors, series 2 and series 3. Product standard
BS EN 4165-014:2005. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuousShielded accessory body, 2 and 4 modules for connectors, series 2 and series 3. Product standard
BS EN 4165-015:2005. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuousRound chimney for accessory (1 per module cavity). Product standard
BS EN 4165-016:2005. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuousDouble oval chimney for accessory (1 per 2 modules). Product standard
BS EN 4165-017:2005. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuousBlank chimney for accessory (1 per module cavity). Product standard
BS EN 4165-018:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuousProtective cover for receptacle 2 or 4 modules, series 2 and series 3. Product standard
BS EN 4165-020:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuousCoupling system keyway for receptacle. Product standard
BS EN 4165-021:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuousCoupling system keyway for plug. Product standard
BS EN 4165-022:2005. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuousInsertion/extraction tool for removal of modules. Product standard
BS EN 4165-023:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuousTooling for assembly receptacle coding component. Product standard
BS EN 4165-024:2011. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuousSingle module plug. Product standard
BS EN 4165-025:2011. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuousModule receptacle. Product Norm
BS EN 4165-026:2011. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuousAccessories for single modules. Product standard
BS EN 4166:2003. Aerospace series. Clips, spring tension, three parts. PTFE bushes
BS EN 4166:2004. Aerospace series. Clips, spring tension, three parts. PTFE bushes
BS EN 4167:2003. Aerospace series. Clips, spring tension, three parts. Inner clips in heat resisting steel FE-PA92HT (A286)
BS EN 4167:2004. Aerospace series. Clips, spring tension, three parts. Inner clips in heat resisting steel FE-PA2601 (A286)
BS EN 4168:2003. Aerospace series. Clips, spring tension, three parts. Outer clips in heat resisting steel FE-PA92HT (A286)
BS EN 4168:2004. Aerospace series. Clips, spring tension, three parts. Outer clips in heat resisting steel FE-PA2601 (A286)
BS EN 417:1992. Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances. Construction, inspection, testing and marking
BS EN 417:2003. Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances. Construction, inspection, testing and marking
BS EN 417:2012. Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances. Construction, inspection, testing and marking
BS EN 4170:2007. Aerospace series. Paints and varnishes. Test method for measurement of resistance to cold crack temperature cycle
BS EN 4171:2011. Aerospace series. Paints and varnishes. Test method for determination of phosphoric acid index
BS EN 4172:2006. Aerospace series. Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series. Classification: 1 100 MPa (at ambient temperature) / 315°C
BS EN 4173:2006. Aerospace series. Lockbolts, 100 countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C
BS EN 4174:2006. Aerospace series. Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series
BS EN 4175:2005. Aerospace series. Collars, flanged swage locking, sheartype, in titanium TI-P99002, metric series
BS EN 4176:2005. Aerospace series. Lockbolts, 100° countersunk normal head or protruding head, tension-/ sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating. Collars in titanium TI-P99002 or aluminium alloy 2024. Metric series. Technical specification
BS EN 4178:2009. Aerospace series. Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated. 1100 MPa (at ambient temperature) / 315 °C
BS EN 4179:2000. Qualification and approval of personnel for non-destructive testing
BS EN 4179:2005. Aerospace series. Qualification and approval of personnel for non-destructive testing
BS EN 4179:2009. Aerospace series. Qualification and approval of personnel for non-destructive testing
BS EN 418:1992. Safety of machinery. Emergency stop equipment, functional aspects. Principles for design
BS EN 4180:2002. Aerospace series. Circular tubes, for fluids in titanium and titanium alloys. Wide tolerances. Diameter 4 mm ≤ D ≤ 40 mm. Dimensions
BS EN 4182:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, reduced
BS EN 4183:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90° welded ends
BS EN 4184:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 45° double, welded ends
BS EN 4185:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, bulkhead on run long
BS EN 4186:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, cross
BS EN 4187:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90°, bulkhead, long
BS EN 4188:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90° bulkhead, long, welded end
BS EN 4189:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, bulkhead branch long
BS EN 4190:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, reduced with thrust wire nut on run
BS EN 419-1:2000. Non-domestic gas-fired overhead luminous radiant heatersSafety
BS EN 4191:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, reduced, bulkhead branch, long
BS EN 419-1:2009. Non-domestic gas-fired overhead luminous radiant heatersSafety
BS EN 4192:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, reduced bulkhead branch
BS EN 419-2:2006. Non-domestic gas-fired overhead luminous radiant heatersRational use of energy
BS EN 419211-2:2013. Protection profiles for secure signature creation deviceDevice with key generation
BS EN 419251-1:2013. Security requirements for device for authenticationProtection profile for core functionality
BS EN 419251-2:2013. Security requirements for device for authenticationProtection profile for extension for trusted channel to certificate generation application
BS EN 419251-3:2013. Security requirements for device for authentication Additional functionality for security targets
BS EN 4193:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, reduced bulkhead on run long
BS EN 4194:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, reduced, bulkhead
BS EN 4195:2011. Aerospace series. Paints and varnishes. Test method for determination of chromate leaching
BS EN 4198:2006. Aerospace series. Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel. Dimensions and loads
BS EN 4199-001:2006. Aerospace series. Bonding straps for aircraftTechnical specification
BS EN 4199-001:2013. Aerospace series. Bonding straps for aircraftTechnical specification
BS EN 4199-002:2006. Aerospace series. Bonding straps for aircraftIndex of product standard
BS EN 4199-003:2009. Aerospace series. Bonding straps for aircraftBonding strap assemblies with flat braided conductor copper, tin plated -65°C up to 150°C and copper, nickel plated -65°C up to 260°C. Product standard
BS EN 4199-004:2009. Aerospace series. Bonding straps for aircraftRound bonding straps, copper, tin plated -65 °C up to 150 °C and nickel plated -65 °C up to 260 °C. Product standard
BS EN 4199-005:2009. Aerospace series. Bonding straps for aircraftFlat braid conductors copper, tin plated -65°C up to 150°C and copper, nickel plated, -65°C up to 260°C. Product standard
BS EN 4199-006:2006. Aerospace series. Bonding straps for aircraftRound braid copper conductors for bonding straps, tin plated up to 150°C or nickel plated up to 260°C. Product standard
BS EN 420:1994. General requirements for gloves
BS EN 420:2003+A1:2009. Protective gloves. General requirements and test methods
BS EN 4202:2005. Aerospace series. Aluminium alloy AL-P6082-T651. Plate. 6 mm < a ≤ 25 mm
BS EN 4203:2005. Aerospace series. Aluminium alloy AL-P8090-T89. Sheet. 0,6 mm ≤ a ≤ 6 mm
BS EN 4204:2005. Aerospace series. Aluminium alloy AL-P8090. T841. Sheet. 0,6 mm ≤ a ≤ 6 mm
BS EN 4209:2005. Aerospace series. Aluminium alloy AL-P2219-T851. Plate. 6 mm <a ≤50 mm
BS EN 421:1994. Protective gloves against ionizing radiation and radioactive contamination
BS EN 421:2010. Protective gloves against ionizing radiation and radioactive contamination
BS EN 4211:2005. Aerospace series. Aluminium alloy AL-P2024-T42. Clad plate. 6mm < a ≤ 25mm
BS EN 4212:2005. Aerospace series. Aluminium alloy AL-P5086-H111. Plate. 6mm < a ≤8 0mm
BS EN 4213:2005. Aerospace series. Aluminium alloy AL-P6061-T651. Plate. 6mm <a ≤ 80mm
BS EN 4214:2005. Aerospace series. Aluminium alloy AL-P7010-T651. Plate. 6 mm <a ≤20 mm
BS EN 4215:2005. Aerospace series. Aluminium alloy AL-P7175-T651. Plate. 6 mm <a ≤80 mm
BS EN 4216:2007. Aerospace series. Steel FE-CM3801 (GX5CrNiCuNb16-4). Homogenized, solution treated and precipitation hardened, investment casting De ≤ 50 mm, Rm ≥ 900 MPa
BS EN 422:1996. Rubber and plastics. Machines. Safety. Blow moulding machines intended for the production of hollow articles. Requirements for the design and construction
BS EN 422:2009. Plastics and rubber machines. Blow moulding machines. Safety requirements
BS EN 423:1993. Resilient floor coverings. Determination of the effect of stains
BS EN 423:2002. Resilient floor coverings. Determination of resistance to staining
BS EN 4233:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, welded, threaded
BS EN 4234:2006. Aerospace series. Clamps, worm drive. Dimensions, masses
BS EN 4234:2009. Aerospace series. Clamps, worm drive. Dimensions, masses
BS EN 424:1993. Resilient floor coverings. Determination of the effect of the simulated movement of a furniture leg
BS EN 424:2002. Resilient floor coverings. Determination of the effect of simulated movement of a furniture leg
BS EN 4247:2005. Aerospace series. Aluminium alloy AL-P2024-T42. Plate. 6 mm <a ≤140 mm
BS EN 425:1994. Resilient floor coverings. Determination of the effect of a castor chair
BS EN 425:2002. Resilient and laminate floor coverings. Castor chair test
BS EN 4250:2001. Aerospace series. Nickel base alloys NI-B41001 (NiCr19Si7B). Filler metal for brazing. Amorphous foil
BS EN 4258:1998. Metallic materials. General organization of standardization. Links between types of EN standards and their use
BS EN 426:1993. Resilient floor coverings. Determination of width, length, straightness and flatness of sheet material
BS EN 4262:2013. Aerospace series. Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20). As forged. Forging stock. a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 880MPa
BS EN 4263:2013. Aerospace series. Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20). As forged. Forging stock. a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 960MPa
BS EN 4265:2013. Aerospace series. Bearing spherical plain, metal to metal in corrosion resisting steel. Wide series. Dimensions and loads. Inch series
BS EN 4266:2013. Aerospace series. Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated. Wide series. Dimensions and loads. Inch series
BS EN 4267:2001. Aerospace series. Round bar in titanium and titanium alloys. Diameter 6 mm ≤ D ≤ 160 mm. Dimensions
BS EN 4268:2012. Aerospace series. Metallic materials. Heat treatment facilities. General requirements
BS EN 427:1994. Resilient floor coverings. Determination of the side length, squareness and straightness of tiles
BS EN 428:1993. Resilient floor coverings. Determination of overall thickness
BS EN 4283:2005. Aerospace series. Aluminium alloy AL-P2219-T87. Plate. 6 mm < a ≤ 40 mm
BS EN 4286:2005. Aerospace series. Aluminium alloy AL-P8090-T89. Die forgings. a ≤ 125 mm
BS EN 4287:2005. Aerospace series. Aluminium alloy AL-P7010. Forging stock
BS EN 429:1993. Resilient floor coverings. Determination of the thickness of layers
BS EN 4291:2005. Aerospace series. Aluminium alloy AL-P8090. Forging stock
BS EN 4292:2005. Aerospace series. Aluminium alloy AL-R39002. Forging stock
BS EN 430:1994. Resilient floor coverings. Determination of mass per unit area
BS EN 4300:2008. Aerospace series. Identification marking of engine items. Design standard
BS EN 4301:2009. Aerospace series. Identification marking methods for engine items. Engineering requirements
BS EN 4302:2008. Aerospace series. Open ring insert tool, square drive
BS EN 4303:2005. Aerospace series. Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
BS EN 4304:2005. Aerospace series. Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
BS EN 4306:2005. Aerospace series. Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)
BS EN 4307:2005. Aerospace series. Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)
BS EN 431:1994. Resilient floor coverings. Determination of peel resistance
BS EN 4312:2006. Aerospace series. Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315°C
BS EN 4313:2005. Aerospace series. Aluminium aloy AL-P6013-T6. Sheet and strip. 0,5 mm ≤a ≤6 mm
BS EN 4314:2007. Aerospace series. Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15). Non heat treated, forging stock a or D ≤ 250 mm
BS EN 4315:2007. Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Solution treated and precipitation treated, bar and section a or D ≤ 100 mm, Rm ≥ 900 MPa
BS EN 4317:2007. Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Non heat treated, forging stock a or D ≤ 200 mm
BS EN 4318:2007. Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Solution treated and precipitation treated, bar and section De ≤ 100 mm, Rm ≥ 960 MPa
BS EN 432:1994. Resilient floor coverings. Determination of shear force
BS EN 4321:2003. Aerospace series. Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickelbase alloy NI-PH2601 (Inconel 718), silver plated. Classification: 1550 MPa (at ambient temperature)/650 °C
BS EN 4321:2004. Aerospace series. Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification. 1 550 Mpa (at ambient temperature)/650°C
BS EN 4324:2002
BS EN 4324:2002. Aerospace series. Aluminium alloy AL-W42201. Filler metal for welding. Rod
BS EN 4325:2001
BS EN 4325:2001. Aerospace series. Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3AI). Filler metal for welding. Wire and rod
BS EN 4326:2001
BS EN 4326:2001. Aerospace series. Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1). Filler metal for welding. Wire and rod
BS EN 4327:2001
BS EN 4327:2001. Aerospace series. Heat resisting alloy CO-WH1401 (CoCr26Ni11W8). Filler metal for welding. Wire and rod
BS EN 4328:2002
BS EN 4328:2002. Aerospace series. Steel FE-WM1601 (X18CrWNi13-3-2). Filler metal for welding. Wire and rod
BS EN 4329:2001
BS EN 4329:2001. Aerospace series. Heat resisting alloy NI-WH0001 (NiCr20). Filler metal for welding. Wire and rod
BS EN 433:1994
BS EN 433:1994. Resilient floor coverings. Determination of residual indentation after static loading
BS EN 4330:2002
BS EN 4330:2002. Aerospace series. Steel FE-WA4802 (X8CrNiMn27-22-2). Filler metal for welding. Wire and rod
BS EN 4331:2002
BS EN 4331:2002. Aerospace series. Steel FE-WL1804 (25CrMnMo4-2-2). Filler metal for welding. Wire and rod
BS EN 4332:2002
BS EN 4332:2002. Aerospace series. Steel FE-WL1805 (8CrMnMo12-4-9). Filler metal for welding. Wire and rod
BS EN 4333:2002
BS EN 4333:2002. Aerospace series. Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2). Filler metal for welding. Wire and rod
BS EN 4334:2002
BS EN 4334:2002. Aerospace series. Steel FE-WL1806 (15CrMnMoV5-4-9-3). Filler metal for welding. Wire and rod
BS EN 4335:2002
BS EN 4335:2002. Aerospace series. Steel FE-WA2602 (X4NiCrTiMoV26-15). Filler metal for welding. Wire and rod
BS EN 4336:2002
BS EN 4336:2002. Aerospace series. Steel FE-WA3801 (X4CrNiMn20-10-2). Filler metal for welding. Wire and rod
BS EN 4337:2001
BS EN 4337:2001. Aerospace series. Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn2). Filler metal for welding. Wire and rod
BS EN 4338:2001
BS EN 4338:2001. Aerospace series. Heat resisting alloy. NI-WH3902 (NiCr25Mo10C). Filler metal for welding. Wire and rod
BS EN 4339:2001
BS EN 4339:2001. Aerospace series. Heat resisting alloy CO-WH4001 (CoCr29W9). Filler metal for welding. Wire and rod
BS EN 434:1994
BS EN 434:1994. Resilient floor coverings. Determination of dimensional stability and curling after exposure to heat
BS EN 4340:2002
BS EN 4340:2002. Aerospace series. Magnesium alloy MG-W68001. Filler metal for welding. Wire and rod
BS EN 4341:2001
BS EN 4341:2001. Aerospace series. Aluminium alloy AL-W46431. Filler metal for welding. Wire and rod
BS EN 4342:2001
BS EN 4342:2001. Aerospace series. Titanium TI-W99001. Filler metal for welding. Wire and rod
BS EN 4343:2002
BS EN 4343:2002. Aerospace series. Steel FE-WM1001 (X13Cr12). Filler metal for welding. Wire and rod
BS EN 4344:2001
BS EN 4344:2001. Aerospace series. Steel FE-WM1002 (X13Cr13). Filler metal for welding. Wire and rod
BS EN 4346:2007
BS EN 4346:2007. Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm
BS EN 4347:2007
BS EN 4347:2007. Aerospace series. Steel FE-PM1506 (X3CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm
BS EN 435:1994
BS EN 435:1994. Resilient floor coverings. Determination of flexibility
BS EN 4352:2003
BS EN 4352:2003. Aerospace series. Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH 2601 (Inconel 718), MoS2 coated. Classification: 1550 MPa (at ambient temperature)/425 °C
BS EN 4352:2004
BS EN 4354:2006. Aerospace series. Six lobe recess. Drivers, relieved
BS EN 4355:2008. Aerospace series. Six lobe recess. Drivers, socket
BS EN 4356:2006. Aerospace series. Six lobe recess. Drivers, short
BS EN 4357:2006. Aerospace series. Six lobe recess. Drivers, handle
BS EN 4358:2006. Aerospace series. Six lobe recess. Drivers, double ended, 90
BS EN 4359:2006. Aerospace series. Six lobe recess. Drivers. Technical Specification
BS EN 436:1994. Resilient floor coverings. Determination of density
BS EN 437:1994. Specification for test gases, test pressures and categories of appliance, for gas appliances
BS EN 437:2003+A1:2009. Tests gases. Test pressures. Appliance categories
BS EN 4372:2009. Aerospace series. Heat resisting nickel alloy with copper NI-PD9001 (NiCu31). Wire for solid rivets. D ≤ 10 mm
BS EN 4373:2007. Aerospace series. Heat resisting alloy NI-PD9001 (NiCu31). Annealed, seamless tube D ≤ 75 mm, a ≤ 3 mm
BS EN 4379:2007. Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb).Solution treated, forging De ≤ 200 mm
BS EN 438-1:1991. Decorative high-pressure laminates (HPL) sheets based on thermosetting resinsSpecifications
BS EN 438-1:2005. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)Introduction and general information
BS EN 438-2:1991. Decorative high-pressure laminates (HPL) sheets based on thermosetting resinsDetermination of properties
BS EN 438-2:2005. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)Determination of properties
BS EN 4382:2006. Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Solution treated. Seamless tubes. For hydraulic application. D ≤ 50 mm, a ≤ 3 mm
BS EN 438-3:2005. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)Classification and specifications for laminates less than 2mm thick intended for bonding to supporting substrates
BS EN 4383:2006. Aerospace series. Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3). Non heat treated. Remelting stock
BS EN 438-4:2005. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)Classification and specifications for compact laminates of thickness 2mm and greater
BS EN 4384:2007. Aerospace series. Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al). Non heat treated. Remelting stock
BS EN 438-5:2005. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)Classification and specifications for flooring grade laminates less than 2mm thick intended for bonding to supporting substrates
BS EN 438-6:2005. Decorative high-pressure laminates (HPL) sheets based on thermosetting resinsClassification and specifications for exterior-grade compact laminates of thickness 2mm and greater
BS EN 438-7:2005. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
BS EN 438-8:2009. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)Classification and specifications for design laminates
BS EN 438-9:2010. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)Classification and specifications for alternative core laminates
BS EN 439:1994. Welding consumables. Shielding gases for arc welding and cutting
BS EN 4396:2008. Aerospace series. Shaft-nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated
BS EN 4399:2008. Aerospace series. Rings, threaded, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated
BS EN 440:1995. Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification
BS EN 4401:2006. Aerospace series. Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C
BS EN 4402:2006. Aerospace series. Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001,with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C
BS EN 4406:2006. Aerospace series. Paints and varnishes. Two component cold curing polyurethane coating. Abrasion resistant
BS EN 4408-1:2005. Aerospace series. Technical drawings. Representation of parts made of composite materialsGeneral rules
BS EN 4408-2:2005. Aerospace series. Technical drawings. Representation of parts made of composite materialsLaminated parts
BS EN 4408-3:2005. Aerospace series. Technical drawings. Representation of parts made of composite materialsParts including core materials
BS EN 4408-4:2005. Aerospace series. Technical drawings. Representation of parts made of composite materialsItems obtained by winding
BS EN 4408-5:2005. Aerospace series. Technical drawings. Representation of parts made of composite materialsSeams
BS EN 4408-6:2005. Aerospace series. Technical drawings. Representation of parts made of composite materialsPreforms
BS EN 441-1:1995. Refrigerated display cabinetsTerms and definitions
BS EN 441-10:1995. Refrigerated display cabinetsTest for absence of odour and taste
BS EN 441-11:1995. Refrigerated display cabinetsInstallation, maintenance and user's guide
BS EN 441-12:1997. Refrigerated display cabinetsMeasurement of the heat extraction rate of the cabinets when the condensing unit is remote from the cabinet
BS EN 441-2:1995. Refrigerated display cabinetsGeneral mechanical and physical requirements
BS EN 441-3:1995. Refrigerated display cabinetsLinear dimensions, areas and volumes
BS EN 441-4:1995. Refrigerated display cabinetsGeneral test conditions
BS EN 441-5:1996. Refrigerated display cabinetsTemperature test
BS EN 4415:2006. Aerospace series. Non-metallic materials. Textiles. Narrow woven fabrics. Technical specification
BS EN 441-6:1995. Refrigerated display cabinetsClassification according to temperature
BS EN 4416:2006. Aerospace series. Non-metallic materials. Textiles. Wide woven fabrics. Technical specification
BS EN 441-7:1995. Refrigerated display cabinetsDefrosting test
BS EN 441-8:1995. Refrigerated display cabinetsWater vapour condensation test
BS EN 441-9:1995. Refrigerated display cabinetsElectrical energy consumption test
BS EN 4420:2003. Aerospace series. Clips, spring tension, in alloy steel FE-PA3903
BS EN 442-1:1996. Specification for radiators and convectorsTechnical specifications and requirements
BS EN 4421:2007. Aerospace series. Studs, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel. Strength class: 1100 MPa(at ambient temperature)
BS EN 442-2:1997. Specification for radiators and convectorsTest methods and rating
BS EN 442-3:1997. Specification for radiators and convectorsEvaluation of conformity
BS EN 442-3:2003. Specification for radiators and convectorsEvaluation of conformity
BS EN 4424:2006. Aerospace series. Rod-ends, adjustable single fork and threaded shank with engagement: 1,5 x thread diameter in titanium alloys. Dimensions and loads
BS EN 4425:2006. Aerospace series. Washers, tab in corrosion resisting steel for flight control rods. Dimensions
BS EN 4429:2006. Aerospace series. Textiles. Testing of narrow woven fabrics. Determination of warp bow
BS EN 443:1997. Helmets for firefighters
BS EN 443:2008. Helmets for fire fighting in buildings and other structures
BS EN 4434:2005. Aerospace series. Copper or copper alloy lightweight conductors for electrical cables. Product standard (normal and tight tolerances)
BS EN 444:1994. Non-destructive testing. General principles for radiographic examination of metallic materials by X- and gamma-rays
BS EN 4443:2012. Aerospace series. Nuts, elliptical clinch, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), MoS2 coated, Classification: 900 MPa (at ambient temperature)/425°C
BS EN 4449:2005. Aluminium alloy AL-P7050. T76. Sheet. 0,8 mm ≤ a ≤ 6 mm
BS EN 445:1997. Grout for prestressing tendons. Test methods
BS EN 445:2007. Grout for prestressing tendons. Test methods
BS EN 4450:2005. Aerospace series. Aluminium alloy AL-P7050-T762. Sheet. 0,8 mm ≤a ≤6 mm
BS EN 4459:2005. Aerospace series. Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel. Design standard
BS EN 446:1997. Grout for prestressing tendons. Grouting procedures
BS EN 446:2007. Grout for prestressing tendons. Grouting procedures
BS EN 4460:2005. Aerospace series. Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel. Installation and removal procedure
BS EN 4461:2007. Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1200 MPa
BS EN 4462:2007. Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1300 MPa
BS EN 4463:2007. Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1400 MPa
BS EN 4464:2007. Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1200 MPa
BS EN 4465:2007. Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1300 MPa
BS EN 4466:2007. Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1400 MPa
BS EN 4467:2007. Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1200 MPa
BS EN 4468:2007. Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1300 MPa
BS EN 4469:2007. Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1400 MPa
BS EN 447:1997. Grout for prestressing tendons. Specification for common grout
BS EN 447:2007. Grout for prestressing tendons. Basic requirements
BS EN 4470:2007. Aerospace series. Steel FE-PM1505 (X1CrNiMoAITi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≤ 1200 MPa
BS EN 4471:2007. Aerospace series. Steel FE-PM1505 (X1CrNiMoAITi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1300 MPa
BS EN 4472:2007. Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1400 MPa
BS EN 4473:2010. Aerospace series. Aluminium pigmented coatings for fasteners. Technical specification
BS EN 4474:2009. Aerospace series. Aluminium pigmented coatings. Coating methods
BS EN 4476:2011. Aerospace series. Paints and varnishes. Cold curing intermediate coat
BS EN 448:1995. Preinsulated bonded pipe systems for underground hot water networks. Fittings assemblies of steel service pipes, polyurethane thermal insulation and outer casing of high density polyethylene
BS EN 448:2003. District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 448:2009. District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 4488:2013. Aerospace series. Non-metallic materials. Anaerobic polymerisable compounds. Threadlocking. Torque strength 2 Nm
BS EN 449:1997. Specification for dedicated liquefied petroleum gas appliances. Domestic flueless space heaters (including diffusive catalytic combustion heaters)
BS EN 449:2002+A1:2007. Specification for dedicated liquefied petroleum gas appliances. Domestic flueless space heaters (including diffusive catalytic combustion heaters)
BS EN 4491:2013. Aerospace series. Non-metallic materials. Anaerobic polymerisable compounds. Threadlocking. Torque strength 16 Nm
BS EN 4492:2013. Aerospace series. Non-metallic materials. Anaerobic polymerisable compounds. Threadlocking. Torque strength 19 Nm
BS EN 4493:2008. Aerospace series. Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH1801 (NIP96HT, Nimonic 90), silver plated
BS EN 4494:2006. Aerospace series. Rings, split, in stainless steel
BS EN 4495:2006. Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C
BS EN 4496:2005. Aerospace series. Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315 °C
BS EN 4497:2005. Aerospace series. Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: 1 100 MPa (at ambient temperature) / 315 °C
BS EN 4498:2005. Aerospace series. Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating. Classification: 1 550 MPa (at ambient temperature) / 315 °C
BS EN 4499:2009. Aerospace series. Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315 °C
BS EN 450:1995. Fly ash for concrete. Definitions, requirements and quality control
BS EN 4500-001:2012. Aerospace series. Metallic materials. Rules for drafting and presentation of material standardsGeneral rules
BS EN 4500-003:2012. Aerospace series. Metallic materials. Rules for drafting and presentation of material standardsSpecific rules for heat resisting alloys
BS EN 4500-004:2012. Aerospace series. Metallic materials. Rules for drafting and presentation of material standardsSpecific rules for titanium and titanium alloys
BS EN 4500-005:2012. Aerospace series. Metallic materials. Rules for drafting and presentation of material standardsSpecific rules for steels
BS EN 45003:1995. Calibration and testing laboratory accreditation systems. General requirements for operation and recognition
BS EN 45004:1995. General criteria for the operation of various types of bodies performing inspection
BS EN 450-1:2005+A1:2007. Fly ash for concreteDefinition, specifications and conformity criteria
BS EN 4501:2006. Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C
BS EN 450-1:2012. Fly ash for concreteDefinition, specifications and conformity criteria
BS EN 45010:1998. General requirements for assessment and accreditation of certification systems
BS EN 45011:1998. General requirements for bodies operating product certification systems
BS EN 45012:1998. General requirements for bodies operating assessment and certification/registration of quality systems
BS EN 45014:1998. General criteria for supplier's declaration of conformity
BS EN 450-2:2005. Fly ash for concreteConformity evaluation
BS EN 45020:1991. Glossary of terms for standardization and related activities
BS EN 45020:1993. Glossary of terms for standardization and related activities
BS EN 45020:1998. Standardization and related activities. General vocabulary
BS EN 45020:2007. Standardization and related activities. General vocabulary
BS EN 4503:2013. Aerospace series. Non-metallic materials. Textiles. Test method. Determination of water soluble chloride and sulfate of aqueous extracts
BS EN 4504:2013. Aerospace series. Non-metallic materials, Textiles. Test method. Determination of flexibility of narrow fabrics
BS EN 4505:2013. Aerospace series. Non-metallic materials. Textiles. Test method. Determination of dimensional stability
BS EN 4507:2013. Aerospace series. Non-metallic materials. Textiles. Test method. Determination of water extractable matter
BS EN 4508:2006. Aerospace series. Paints and varnishes. Test method for anti slip coatings. Determination of the sliding friction behaviour
BS EN 4509:2006. Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature)/315°C
BS EN 451-1:1995. Method of testing fly ashDetermination of free calcium oxide content
BS EN 451-1:2003. Method of testing fly ashDetermination of free calcium oxide content
BS EN 451-2:1995. Method of testing fly ashDetermination of fineness by wet sieving
BS EN 452:1996. Swap bodies. Swap bodies of Class A. Dimensions and general requirements
BS EN 4526:2013. Aerospace series. Metallic materials. Test methods. Sharp edge-notch tensile testing for sheet and strip
BS EN 4528:2009. Aerospace series. Steel FE-PA 3903 (X10CrNi18-8). Cold rolled. Strip for springs. a ≤ 3 mm. 1250 MPa ≤ Rm ≤ 1640 MPa
BS EN 4529-001:2006. Aerospace series. Elements of electrical and optical connection. Sealing plugsTechnical specification
BS EN 4529-002:2006. Aerospace series. Elements of electrical and optical connection. Sealing plugsIndex of product standards
BS EN 4529-003:2006. Aerospace series. Elements of electrical and optical connection. Sealing plugsClass T. Product standard
BS EN 453:2000+A1:2009. Food processing machinery. Dough mixers. Safety and hygiene requirements
BS EN 4530-001:2006. Aerospace series. Sealing sleeves used in elements of connectionTechnical specification
BS EN 4530-002:2006. Aerospace series. Sealing sleeves used in elements of connectionList and utilization of sealing sleeves
BS EN 4530-005:2006. Aerospace series. Sealing sleeves used in elements of connectionSealing sleeves for external diameter cable 3 mm to 4.1 mm. Product standard
BS EN 4530-006:2006. Aerospace series. Sealing sleeves used in elements of connectionSealing sleeves for external diameter cable 4,68 mm to 5,05 mm. Product standard
BS EN 4531-001:2007. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contactsTechnical specification
BS EN 4531-001:2012. Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts Technical specification
BS EN 4531-002:2007. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contactsSpecification of performance and contact arrangements
BS EN 4531-002:2012. Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contactsSpecification of performance and contact arrangements
BS EN 4531-003:2007. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contactsSquare flange receptacle. Product standard
BS EN 4531-003:2012. Aerospace series. Connectors, optical, circular, single andmultipin, coupled by triple start threaded ring. FlushcontactsSquare flange receptacle. Product standard
BS EN 4531-004:2007. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contactsJam nut receptacle. Product standard
BS EN 4531-004:2012. Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. FlushcontactsJam nut receptacle. Product standard
BS EN 4531-005:2007. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contactsPlug. Product standard
BS EN 4531-005:2012. Aerospace series. Connectors, optical, circular, single andmultipin, coupled by triple start threaded ring. FlushcontactsPlug. Product standard
BS EN 4531-101:2007. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contactsOptical contact for EN 4641-100 cable. 55°C to 125°C. Product standard
BS EN 4531-101:2012. Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contactsOptical contact for EN 4641-100 cable -55° C to 125° C. Product standard
BS EN 4531-901:2012. Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contactsFiller plugs. Product standard
BS EN 4532:2009. Aerospace series. Cables, optical, single core 200 μm/280 μm fibre, 2,5 mm outer jacket. Technical specification
BS EN 4533-001:2006. Aerospace series. Fibre optic systems. HandbookTermination methods and tools
BS EN 4533-002:2006. Aerospace series. Fibre optic systems. HandbookTest and measurement
BS EN 4533-003:2006. Aerospace series. Fibre optic systems. HandbookLooming and installation practices
BS EN 4533-004:2006. Aerospace series. Fibre optic systems. HandbookRepair, maintenance and inspection
BS EN 4534-2:2009. Aerospace series. Bushes, plain in aluminium alloy with self-lubricating liner, elevated loadDimensions and loads. Inch series
BS EN 4535-2:2009. Aerospace series. Bushes, flanged in aluminium alloy with self-lubricating liner, elevated loadDimensions and loads. Inch series
BS EN 4536-2:2009. Aerospace series. Bushes, plain in corrosion-resisting steel with self-lubricating liner, elevated loadDimensions and loads. Inch series
BS EN 4537-2:2009. Aerospace series. Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated loadDimensions and loads. Inch series
BS EN 4538-003:2010. Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Narrow series. Dimensions and loadsInch series with low friction coefficient
BS EN 4539-003:2010. Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Wide series. Dimensions and loadsInch series with low friction coefficient
BS EN 454:2000+A1:2009. Food processing machinery. Planetary mixers. Safety and hygiene requirements
BS EN 4540:2011. Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Technical specification
BS EN 4549:2003. Aerospace series. Pipe coupling, in heat resisting steel or in heat resisting nickel alloy. Coupling end, welded. Design configuration. Inch series
BS EN 45501:1994. Specification for metrological aspects of non-automatic weighing instruments
BS EN 4550-1:2003. Aerospace series. Pipe coupling 37°. Design configuration. Inch seriesMale sealing ends, spherical
BS EN 4550-2:2003. Aerospace series. Pipe coupling 37°. Design configuration. Inch seriesPort ends
BS EN 45502-1:1998. Active implantable medical devicesGeneral requirements for safety, marking and information to be provided by the manufacturer
BS EN 45502-2-1:2003. Active implantable medical devicesParticular requirements for active implantable medical devices intended to treat bradyarrhythmia (cardiac pacemakers)
BS EN 45502-2-2:2008. Active implantable medical devicesParticular requirements for active implantable medical devices intended to treat tachyarrhythmia (includes implantable defibrillators)
BS EN 45502-2-3:2010. Active implantable medical devicesParticular requirements for cochlear and auditory brainstem implant systems
BS EN 45503:1996. Attestation standard for the assessment of contract award procedures of entities operating in the water, energy, transport and telecommunication sectors
BS EN 4550-3:2003. Aerospace series. Pipe coupling 37°. Design configuration. Inch seriesPort connections
BS EN 4550-4:2003. Aerospace series. Pipe coupling 37°. Design configuration. Inch seriesFemale sealing ends
BS EN 455-1:1994. Medical gloves for single useSpecification for freedom from holes
BS EN 455-1:2000. Medical gloves for single useRequirements and testing for freedom from holes
BS EN 4551:2003. Aerospace series. Pipe coupling 37°, in heat resisting steel. Swivel nuts. Inch series
BS EN 45510-1:1998. Guide for the procurement of power station equipment.Common clauses
BS EN 45510-2-2:1999. Guide for the procurement of power station equipment. Electrical equipmentUninterruptible power supplies
BS EN 45510-2-3:2000. Guide for the procurement of power station equipmentElectrical equipment. Stationary batteries and chargers
BS EN 45510-2-4:2000. Guide for the procurement of power station equipmentElectrical equipment. High power static convertors
BS EN 45510-2-5:2002. Guide for the procurement of power station equipment. Electrical equipmentMotors
BS EN 45510-2-6:2000. Guide for the procurement of power station equipmentElectrical equipment
BS EN 45510-2-7:2002. Guide for the procurement of power station equipment. Electrical equipmentSwitchgear and controlgear
BS EN 45510-2-8:2004. Guide for procurement of power station equipmentElectrical equipment
BS EN 45510-2-9:2008. Guide for procurement of power station equipmentElectrical equipment. Cabling systems
BS EN 45510-3-1:2000. Guide for the procurement of power station equipment. BoilersWater tube boilers
BS EN 45510-3-2:2000. Guide for the procurement of power station equipment. BoilersShell boilers
BS EN 45510-3-3:2000. Guide for the procurement of power station equipment. BoilersBoilers with fluidized bed firing
BS EN 45510-4-1:1999. Guide for the procurement of power station equipment. Boiler auxiliariesEquipment for reduction of dust emissions
BS EN 45510-4-10:2000. Guide for the procurement of power station equipment. Boiler auxiliariesFlue gas denitrification (De-NOx) plant
BS EN 45510-4-2:1999. Guide for the procurement of power station equipment. Boiler auxiliariesGas-air, steam-air and gas-gas heaters
BS EN 45510-4-3:1999. Guide for the procurement of power station equipment. Boiler auxiliariesDraught plant
BS EN 45510-4-4:2002. Guide for the procurement of power station equipment. Boiler auxiliariesFuel preparation equipment
BS EN 45510-4-5:2002. Guide for the procurement of power station equipment. Boiler auxiliariesCoal handling and bulk storage plant
BS EN 45510-4-7:1999. Guide for the procurement of power station equipment. Boiler auxiliariesAsh handling plant
BS EN 45510-4-8:2000. Guide for the procurement of power station equipment. Boiler auxiliariesDust handling plant
BS EN 45510-4-9:2000. Guide for the procurement of power station equipment. Boiler auxiliariesSootblowers
BS EN 45510-5-1:1998. Guide for the procurement of power station equipment.Steam turbines
BS EN 45510-5-2:1998. Guide for the procurement of power station equipment.Gas turbines
BS EN 45510-5-3:1998. Guide for the procurement of power station equipment.Wind turbines
BS EN 45510-5-4:1998. Guide for the procurement of power station equipment.Hydraulic turbines, storage pumps and pump-turbines
BS EN 45510-6-1:1998. Guide for the procurement of power station equipment. Turbine auxiliariesDeaerators
BS EN 45510-6-2:1998. Guide for the procurement of power station equipment. Turbine auxiliariesFeedwater heaters
BS EN 45510-6-3:1998. Guide for the procurement of power station equipment. Turbine auxiliariesCondenser plant
BS EN 45510-6-4:2000. Guide for the procurement of power station equipment. Turbine auxiliariesPumps
BS EN 45510-6-5:2000. Guide for the procurement of power station equipment. Turbine auxiliariesDry cooling systems
BS EN 45510-6-6:2000. Guide for the procurement of power station equipment. Turbine auxiliariesTurbine auxiliaries. Wet and wet/dry cooling towers
BS EN 45510-6-7:1998. Guide for the procurement of power station equipment. Turbine auxiliariesMoisture separator reheaters
BS EN 45510-6-8:2000. Guide for the procurement of power station equipment. Turbine auxiliariesCranes
BS EN 45510-6-9:2000. Guide for the procurement of power station equipment. Turbine auxiliariesCooling water systems
BS EN 45510-7-1:2000. Guide for the procurement of power station equipment. Pipework and valvesHigh pressure piping systems
BS EN 45510-7-2:2000. Guide for the procurement of power station equipment. Pipework and valvesBoiler and high pressure valves
BS EN 45510-8-1:1998. Guide for the procurement of power station equipment.Control and instrumentation
BS EN 455-2:1995. Medical gloves for single useSpecification for physical properties
BS EN 455-2:2000. Medical gloves for single useRequirements and testing for physical properties
BS EN 4552:2003. Aerospace series. Pipe coupling 37°, spherical, in heat resisting steel. Straight nipples, welded end. Inch series
BS EN 455-2:2009+A2:2013. Medical gloves for single useRequirements and testing for physical properties
BS EN 455-3:2000. Medical gloves for single useRequirements and testing for biological evaluation
BS EN 4553:2003. Aerospace series. Pipe coupling 37°, spherical, in heat resisting steel. Elbow 90° nipples, welded end. Inch series
BS EN 455-3:2006. Medical gloves for single useRequirements and testing for biological evaluation
BS EN 4554:2003. Aerospace series. Pipe coupling 37°, spherical, in heat resisting steel. Straight unions, threaded. Inch series
BS EN 455-4:2009. Medical gloves for single useRequirements and testing for shelf life determination
BS EN 45544-1:2000. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapoursGeneral requirements and test methods
BS EN 45544-2:2000. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapoursPerformance requirements for apparatus used for measuring concentrations in the region of limit values
BS EN 45544-3:2000. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapoursPerformance requirements for apparatus used for measuring concentrations well above limit values
BS EN 45544-4:2000. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapoursGuide for selection, installation, use and maintenance
BS EN 45545-1:2013. Railway applications. Fire protection on railway vehiclesGeneral
BS EN 45545-2:2013. Railway applications. Fire protection on railway vehiclesRequirements for fire behaviour of materials and components
BS EN 45545-3:2013. Railway applications. Fire protection on railway vehiclesFire resistance requirements for fire barriers
BS EN 45545-4:2013. Railway applications. Fire protection on railway vehiclesFire safety requirements for rolling stock design
BS EN 45545-5:2013. Railway applications. Fire protection on railway vehiclesFire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles
BS EN 45545-6:2013. Railway applications. Fire protection on railway vehiclesFire control and management systems
BS EN 45545-7:2013. Railway applications. Fire protection on railway vehiclesFire safety requirements for flammable liquid and flammable gas installations
BS EN 4555:2003. Aerospace series. Pipe coupling 37°, in heat resisting steel. Ferrules, welded end. Inch series
BS EN 4556:2003. Aerospace series. Pipe coupling 37°, in heat resisting steel. Cap assemblies. Inch series
BS EN 4557:2003. Aerospace series. Pipe coupling 37°, spherical, in heat resisting steel. Tees nipples, welded end. Inch series
BS EN 456:1991. Method for determination of flashpoint of paints, varnishes and related products by the rapid equilibrium method
BS EN 4560:2003. Aerospace series. Pipe coupling 37°, spherical, up to 21000 kPa. Inch series. Technical specification
BS EN 4561:2003. Aerospace series. Pipe coupling, welded, in heat resisting steel. Elbow 90°. Inch series
BS EN 4562:2003. Aerospace series. Pipe coupling, welded, in heat resisting steel. Reductors. Inch series
BS EN 4563:2003. Aerospace series. Pipe coupling, welded, in heat resisting steel. Tees. Inch series
BS EN 457:1992. Safety of machinery. Auditory danger signals. General requirements, design and testing
BS EN 458:1994. Hearing protectors. Recommendations for selection, use, care and maintenance. Guidance document
BS EN 458:2004. Hearing protectors. Recommendations for selection, use, care and maintenance. Guidance document
BS EN 4585:2003. Aerospace series. Clips, spring tension. Technical specification
BS EN 4588:2007. Aerospace series. Paints and varnishes. Two component, cold curing polyurethane paint, anti slip
BS EN 4590:2005. Aerospace series. Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated
BS EN 459-1:2001. Building limeDefinitions, specifications and conformity criteria
BS EN 459-1:2010. Building limeDefinitions, specifications and conformity criteria
BS EN 459-2:1995. Building limeTest methods
BS EN 459-2:2001. Building limeTest methods
BS EN 4592:2006. Aerospace series. Paints and varnishes. Test method for determination of infrared reflectance
BS EN 459-2:2010. Building limeTest methods
BS EN 459-3:2001. Building limeConformity evaluation
BS EN 459-3:2011
BS EN 4593:2011. Aerospace series. Paints and varnishes. Determination of solar absorptance
BS EN 459-3:2011. Building limeConformity evaluation
BS EN 4594:2013. Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Supersonic erosion resistance
BS EN 4595:2013. Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Subsonic erosion resistance
BS EN 460:1994. Durability of wood and wood-based products. Natural durability of solid wood. Guide to the durability requirements for wood to be used in hazard classes
BS EN 46001:1994. Application of EN 29001 (BS 5750- 1) to the manufacture of medical devices
BS EN 46001:1997. Specification for application of EN ISO 9001 to the manufacture of medical devices
BS EN 46002:1994. Application of EN 29002 (BS 5750- 2) to the manufacture of medical devices
BS EN 46002:1997. Specification for application of EN ISO 9002 to the manufacture of medical devices
BS EN 46003:1999. Quality systems. Medical devices. Particular requirements for the application of EN ISO 9003
BS EN 4604-001:2006. Aerospace series. Cable, electrical, for signal transmissionTechnical specification
BS EN 4604-001:2009. Aerospace series. Cable, electrical, for signal transmissionTechnical specification
BS EN 4604-002:2006. Aerospace series. Cable, electrical, for signal transmissionGeneral
BS EN 4604-002:2009. Aerospace series. Cable, electrical, for signal transmissionGeneral
BS EN 4604-003:2009. Aerospace series. Cable, electrical, for signal transmissionCable, coaxial, 50 ohm, 200 °C, type WZ. Product standard
BS EN 4604-004:2007. Aerospace series. Cable, electrical, for signal transmissionCable, microcoaxial, high immunity, 50 Ohms, 200°C, type WS. Product standard
BS EN 4604-006:2009. Aerospace series. Cable, electrical, for signal transmissionCable, coaxial, 50 ohm, 200 °C, type WM. Product standard
BS EN 4604-007:2007. Aerospace series. Cable, electrical, for signal transmissionCable, coaxial 50 Ohms, 200°C, type WN. Product standard
BS EN 4604-008:2009. Aerospace series. Cable, electrical, for signal transmissionCable, coaxial, 50 ohms, 200 °C., Type WD. Product standard
BS EN 4604-009:2009. Aerospace series. Cable, electrical, for signal transmissionCable, coaxial, light weight, 50 ohms, 180 °C, type KW (light WN). Product standard
BS EN 4604-009:2011. Aerospace series. Cable, electrical, for signal transmissionCable, coaxial, light weight, 50 ohms, 180 °C, type KW (light WN). Product standard
BS EN 4604-010:2009. Aerospace series. Cable, electrical, for signal transmissionCable, coaxial, 50 ohms, 200 °C, Type KX (light WN). Product standard
BS EN 4604-010:2011. Aerospace series. Cable, electrical, for signal transmissionCable, coaxial, light weight, 50 Ohms, 200 °C, type KX (light WD). Product standard
BS EN 4608-001:2006. Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65°C and 260°CTechnical specification
BS EN 4608-002:2006. Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65°C and 260°CGeneral
BS EN 4608-003:2012. Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65 °C and 260 °CDN family. Lightweight. UV Laser printable. Product standard
BS EN 4608-005:2012. Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65 °C and 260 °CDW family. Lightweight two-core gauge 24 for data transmission. UV laser printable. Product standard
BS EN 461:1999. Specification for dedicated liquefied petroluem gas appliances. Flueless non-domestic space heaters not exceeding 10 kW
BS EN 46-1:2005. Wood preservatives. Determination of the preventive action against Hylotrupes bajalus (Linnaeus)Larvicidial effect (laboratory method)
BS EN 46-1:2009. Wood preservatives. Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus)Application by surface treatment (laboratory method)
BS EN 4610:2005. Aerospace series. Pipe coupling with 8° 30' in titanium alloy. Elbows 45°, with thrust wire nut
BS EN 4611-002:2012. Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE FamilyGeneral
BS EN 4611-003:2012. Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE FamilyTin plated copper. Operating temperatures, between -65 °C and 135 °C. Single extruded wall for enclosed applications. UV laser printable. Product standard
BS EN 4611-004:2012. Aerospace series. Cables, electrical, for general purpose,single and multicore assembly. XLETFE FamilyTin plated copper. Operating temperatures, between -65 °C and 135 °C. Dual extruded wall for open applications. UV laser printable. Product standard
BS EN 4611-005:2012. Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE FamilySilver plated copper. Operating temperatures, between -65 °C and 150 °C. Single extruded wall for enclosed applications. UV laser printable. Product standard
BS EN 4611-006:2012. Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE FamilySilver plated copper. Operating temperatures, between -65°C and 150°C. Dual extruded wall for open applications. UV laser printable. Product standard
BS EN 4611-007:2012. Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE FamilyNickel plated copper. Operating temperatures, between -65°C and 150°C. Dual extruded wall for open applications. UV laser printable. Product standard
BS EN 4611-008:2012. Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE FamilyBP. Nickel plated copper. Operating temperatures, between -65°C and 150°C. Dual extruded wall for open applications with additional protection in areas of high vibration, cable flexing and fluid contamination. UV laser printable. Product standard
BS EN 4611-009:2012. Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE FamilyBJ. Nickel plated copper. Operating temperatures, between -65°C and 150°C. Single extruded wall for use as cable cores or within equipment in areas of high vibration, cable flexing and fluid contamination. UV laser printable. Product standard
BS EN 4612-002:2011. Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed General
BS EN 4612-003:2011. Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketedTin plated copper. Operating temperatures, between -65 °C and 135 °C. Single extruded wall for open applications, with jacket without screen. UV laser printable. Product standard
BS EN 4612-004:2011. Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketedTin plated copper. Operating temperatures, between -65 °C and 135 °C. Single extruded wall for open applications, with jacket and screen (braid). UV laser printable. Product standard
BS EN 4612-005:2011. Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketedTin plated copper. Operating temperatures, between -65 °C and 135 °C. Dual extruded wall for open applications, with jacket without screen. UV laser printable. Product standard
BS EN 4612-006:2011. Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketedTin plated copper. Operating temperatures, between -65 °C and 135 °C. Dual extruded wall for open applications, with jacket and screen (braid). UV laser printable. Product standard
BS EN 4612-007:2011. Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketedSilver plated copper. Operating temperatures, between -65 °C and 150 °C. Single extruded wall for open applications, with jacket without screen. UV laser printable. Product standard
BS EN 4612-008:2011. Aerospace series. Cables, electrical, for general purpose, single and multicore assembly XLETFE Family. Jacketed or screened and jacketedSilver plated copper. Operating temperatures, between -65 °C and 150 °C. Single extruded wall for open applications, with jacket and screen (braid). UV laser printable. Product standard
BS EN 4612-009:2011. Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketedSilver plated copper. Operating temperatures, between -65 °C and 150 °C. Dual extruded wall for open applications, with jacket without screen. UV laser printable. Product standard
BS EN 4612-010:2011. Aerospace series. Cables, electrical, for general cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketedSilver plated copper. Operating temperatures, between -65°C and 150°C. Dual extruded wall for open applications, with jacket and screen (braid). UV laser printable. Product standard
BS EN 4612-011:2011. Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketedNickel plated copper. Operating temperatures, between -65 °C and 150 °C. Dual extruded wall for open applications, with jacket without screen. UV laser printable. Product standard
BS EN 4612-012:2011. Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketedNickel plated copper. Operating temperatures, between -65 °C and 150 °C. Dual extruded wall for open applications, with jacket and screen (braid). UV laser printable. Product standard
BS EN 4612-013:2011. Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketedSX, TC and UC. Nickel plated copper. Operating temperatures, between -65°C and 150°C. Single extruded wall for equipment only, with jacket and screen (spiral). UV laser printable. Product standard
BS EN 4613:2009. Aerospace series. Spherical plain bearings in corrosion resisting steel with self-lubricating liner, narrow series. Dimensions and loads. Inch series
BS EN 4614:2009. Aerospace series. Spherical plain bearings in corrosion resisting steel with self-lubricating liner, wide series. Dimensions and loads. Inch series
BS EN 4615:2005. Aerospace series. Magnesium alloy MG-C18002. T4. Sand casting
BS EN 4616:2005. Aerospace series. Magnesium alloy MG-C18002. T4. Chill casting
BS EN 4617:2006. Aerospace series. Recommended practices for standardizing company standards
BS EN 4618:2009. Aerospace series. Aircraft internal air quality standards, criteria and determination methods
BS EN 4619:2010. Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys. Installation and removal procedure
BS EN 46-2:2006. Wood preservatives. Determination of the preventive action against Hylotrupes bajalus (Linnaeus)Ovicidal effect (laboratory method)
BS EN 46-2:2009. Wood preservatives. Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus)Ovicidal effect (laboratory method)
BS EN 4620:2010. Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys. Design standard
BS EN 462-1:1994. Non-destructive testing. Image quality of radiographsImage quality indicators (wire type). Determination of image quality value
BS EN 4621:2010. Aerospace series. Inserts, MJ threads, self-locking, self-broaching keys. Technical specification
BS EN 462-2:1994. Non-destructive testing. Image quality of radiographsImage quality indicators (step/hole type). Determination of image quality value
BS EN 4622:2010. Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting steel FE-PA2601 (A286), MoS2 coated
BS EN 462-3:1997. Non-destructive testing. Image quality of radiographsImage quality classes for ferrous metals
BS EN 4623:2010. Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated
BS EN 462-4:1995. Non-destructive testing. Image quality of radiographsExperimental evaluation of image quality values and image quality tables
BS EN 4624:2010. Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plate
BS EN 462-5:1996. Non-destructive testing. Image quality of radiographsImage quality indicators (duplex wire type), determination of image unsharpness value
BS EN 4626-001:2008. Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65 °C to 125 °C (cable dependent). Flush contactsTechnical specification
BS EN 4626-002:2008. Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65°C to 125°C (cable dependent). Flush contactsSpecification of performance and contact arrangements
BS EN 4626-003:2008. Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65°C to 125°C (cable dependent). Flush contactsAdaptor for plug
BS EN 4626-004:2008. Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65°C to 125°C (cable dependent). Flush contactsAdaptor for receptacle
BS EN 4626-101:2008. Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65°C to 125°C (cable dependent). Flush contactsOptical contact (sub-assembly) for plug. Product standard
BS EN 4626-201:2009. Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65 °C to 125 °C (cable dependent). Flush contactsOptical contact (sub-assembly) for receptacle. Product standard
BS EN 4626-202:2009. Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65°C to 125°C (cable dependent). Flush contactsOptical contact assembly for 900 μm buffered fibre receptacle. Product standard
BS EN 4627:2007. Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Forgings. De ≤ 150 mm. 1100 MPa ≤ Rm ≤ 1300 MPa
BS EN 4628:2007. Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Bar. De ≤ 150 mm. 1100 MPa ≤ Rm ≤ 1300 MPa
BS EN 4628:2013. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De ≤ 200 mm. 1 150 MPa ≤ Rm ≤ 1 300 MPa
BS EN 4629:2007. Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Forging stock. De ≤ 300 mm
BS EN 4629:2013. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Softened. Forging stock. De ≤ 300 mm
BS EN 463:1995. Protective clothing. Protection against liquid chemicals. Test method. Determination of resistance to penetration by a jet of liquid (jet test)
BS EN 4630:2007. Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Forgings. De ≤ 200 mm. 900 MPa ≤ Rm ≤ 1050 MPa
BS EN 4631:2007. Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Bar. De ≤ 200 mm. 900 MPa ≤ Rm ≤ 1050 MPa
BS EN 4631:2013. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De ≤ 200 mm. 900 MPa ≤ Rm ≤ 1 050 MPa
BS EN 4632-001:2008. Aerospace series. Welded and brazed assemblies for aerospace constructions. Weldability and brazeability of materialsGeneral requirements
BS EN 4632-002:2008. Aerospace series. Welded and brazed assemblies for aerospace constructions. Weldability and brazeability of materialsHomogeneous assemblies aluminium and aluminium alloys
BS EN 4632-003:2010. Aerospace series. Weldability and brazeability of materials in aerospace constructionsWelding and brazing of homogeneous assemblies of unalloyed and low alloy steels
BS EN 4632-004:2012. Aerospace series. Weldability and brazeability of materials in aerospace constructionsWelding and brazing of homogeneous assemblies of high alloyed steels
BS EN 4632-005:2009. Aerospace series. Weldability and brazeability of materials in aerospace constructionsHomogeneous assemblies of heat resisting Ni or Co base alloys
BS EN 4632-006:2013. Aerospace series. Weldability and brazeability of materials in aerospace constructionsHomogeneous assemblies of titanium alloys
BS EN 4634:2009. Aerospace series. Screws, 100° countersunk head, six lobe recess, short thread, in heat resisting steel FE-PA2601 (A286), passivated. Classification: 900 MPa (at ambient temperature)/650°C
BS EN 4635:2009. Aerospace series. Screws, 100° countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1270 MPa (at ambient temperature) / 650 °C
BS EN 4636:2009. Aerospace series. Screws, 100° countersunk head, six lobe recess, short thread, in titanium alloy TI-P64001, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315°C
BS EN 4637:2010. Aerospace series. Blast media. White corundum
BS EN 4638:2010. Aerospace series. Blast media. Brown corundum, without iron
BS EN 4639-001:2007. Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holderTechnical specification
BS EN 4639-002:2007. Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holderList of product standards
BS EN 4639-003:2007. Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holderMale optical module. Product standard
BS EN 4639-004:2007. Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holderFemale optical module. Product standard
BS EN 4639-005:2007. Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holderRemovable alignment sleeve holder. Product standard
BS EN 4639-101:2007. Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holderOptical contact for cable EN 4641-100. Operating temperatures between -65°C and 125°C. Product standard
BS EN 4639-102:2007. Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holderOptical contact for cable EN 4641-102. Operating temperatures between -55°C and 100°C. Product standard
BS EN 464:1994. Protective clothing. Protection against liquid and gaseous chemicals, including liquid aerosols and solid particles. Test method. Determination of leak-tightness of gas-tight suits (Internal Pressure Test)
BS EN 4640-001:2009. Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holderTechnical specification
BS EN 4640-002:2009. Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holderList of product standards
BS EN 4640-003:2008. Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holderPlug optical connector. Product standard
BS EN 4640-004:2008. Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holderReceptacle optical connector. Product standard
BS EN 4641-001:2009. Aerospace series. Cables, optical, 125 μm diameter claddingTechnical specification
BS EN 4641-102:2009. Aerospace series. Cables, optical 125 μm outside diameter claddingSemi-loose 62,5/125 μm GI fibre nominal 1,8 mm outside diameter. Product standard
BS EN 4641-103:2010. Aerospace series. Cables, optical 125 μm diameter claddingSemi-loose, ruggedized simplex construction 62,5/125 μm GI fibre nominal 2,74 mm, outside diameter. Product standard
BS EN 4641-104:2010. Aerospace series. Cables, optical 125 μm diameter claddingSemi-loose, ruggedized duplex construction 62,5/125 μm GI fibre nominal, 4,95 mm outside diameter. Product standard
BS EN 4641-105:2010. Aerospace series. Cables, optical 125 μm diameter claddingSemi-loose, ruggedized quadraxial construction 62,5/125 μm GI fibre nominal, 5,72 mm outside diameter. Product standard
BS EN 4641-301:2011. Aerospace series. Cables, optical 125 μm diameter claddingTight structure 50/125 μm GI fibre nominal 1,8 mm outside diameter. Product standard
BS EN 4642:2009. Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Sheet and plate. 0,6 mm ≤ a ≤ 50 mm. 900 MPa ≤ Rm ≤ 1050 MPa
BS EN 4644-001:2012. Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuousTechnical specification
BS EN 4644-002:2012. Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuousSpecification of performance and contact arrangements
BS EN 4644-003:2009. Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C continuousRectangular inserts. Product standard
BS EN 4644-003:2011. Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuousRectangular inserts. Product standard
BS EN 4644-131:2011. Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuousSize 3 plug for rack and panel applications. Product standard
BS EN 4644-133:2011. Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuousSize 3 receptacle for rack and panel application. Product standard
BS EN 4644-141:2011. Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuousSize 4 plug for rack and panel applications. Product standard
BS EN 4644-142:2012. Aerospace series. Connector, electrical and optical, rectangular,modular, rectangular inserts, operating temperature 175°C (or 125°C) continuousSize 4 receptacle for rack and panel application. Product standard
BS EN 4645-001:2010. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holderTechnical specification
BS EN 4645-002:2009. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holderSpecification of performance and contact arrangements
BS EN 4645-003:2009. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holderSquare flange receptacle. Product standard
BS EN 4645-004:2009. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holderJam nut receptacle. Product standard
BS EN 4645-005:2009. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holderPlug. Product standard
BS EN 4649:2009. Aerospace series. Handheld fire extinguishers with synthesis gases, for aircraft use. Technical specification and qualification conditions
BS EN 465:1995. Protective clothing. Protection against liquid chemicals. Performance requirements for chemical protective clothing with spray-tight connections between different parts of the clothing (type 4 equipment)
BS EN 4650:2010. Aerospace series. Wire and cable marking process, UV Laser
BS EN 4655:2010. Aerospace series. Steel FEPM1506 (X1CrNiMoAlTi12-10-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D ≤ 200 mm. Rm ≥ 1400 MPa
BS EN 4656:2010. Aerospace series. Steel FE-PM1507 (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D ≤ 200 mm. Rm ≥ 1520 MPa
BS EN 4657:2010. Aerospace series. Steel FE-PM1507 (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D ≤ 200 mm. Rm ≥ 1650 MPa
BS EN 4659:2010
BS EN 4660-001:2011. Aerospace series. Modular and open avionics architecturesArchitecture
BS EN 4660-002:2011. Aerospace series. Modular and open avionics architecturesCommon functional modules
BS EN 4660-003:2011. Aerospace series. Modular and open avionics architecturesCommunications/Network
BS EN 4660-004:2011. Aerospace series. Modular and open avionics architecturesPackaging
BS EN 4660-005:2011. Aerospace series. Modular and open avionics architecturesSoftware
BS EN 466-1:1995. Protective clothing. Protection against liquid chemicalsPerformance requirements for chemical protective clothing with liquid-tight connections between different parts of the clothing (type 3 equipment)
BS EN 4662:2010. Aerospace series. Test specification for vibration control components
BS EN 467:1995. Protective clothing. Protection against liquid chemicals. Performance requirements for garments providing protection to parts of the body
BS EN 4670:2010. Aerospace series. Steel FEPM1507 (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Softened. Forging stock. a or D ≤ 300 mm
BS EN 4671:2010. Aerospace series. Steel FE-PM1506 (X1CrNiMoAlTi12-10-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1400 MPa
BS EN 4672:2011. Aerospace series. Steel FE-PM1504 (X1CrNiMoAlTi12-10-2). Vacuum induction melted and consumable electrode remelted. Softened. Forging stock. a or D ≤ 300 mm
BS EN 4673-001:2010. Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keysInstallation and removal procedure
BS EN 4673-002:2010. Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keysDesign standard
BS EN 4673-003:2010. Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keysTechnical specification
BS EN 4673-004:2010. Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keysIn heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plating
BS EN 4673-005:2010. Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keysIn heat resisting nickel base alloy NI-P101HT (WASPALOY), silver plating
BS EN 4673-006:2010. Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keysIn heat resisting steel FE-PA2601 (A286), MoS2 coated
BS EN 4675:2011. Aerospace series. Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe). Rm ≥ 1300 MPa. Bars. De < 110 mm
BS EN 4677-001:2012. Aerospace series. Welded and brazed assemblies for aerospace construction. Joints of metallic materials by electron beam weldingQuality of welded assemblies
BS EN 4678:2011. Aerospace series. Weldments and brazements for aerospace structures. Joints of metallic materials by laser beam welding. Quality of weldments
BS EN 468:1995. Protective clothing for use against liquid chemicals. Test method. Determination of resistance to penetration by spray (Spray Test)
BS EN 4681-001:2012. Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminiumTechnical specification
BS EN 4681-002:2012. Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminiumGeneral
BS EN 4683:2011. Aerospace series. Steel FE-WM 3504 (X4CrNiMo16-5-1). Air melted. Filler metal for welding. Wire and rod
BS EN 4685:2011. Aerospace series. Titanium Ti10V2Fe3Al. Bars. D < 110 mm. Rm ≥ 1240 MPa
BS EN 4687:2012. Aerospace series. Paints and varnishes. Chromate free non corrosion inhibiting two components cold curing primer for military application
BS EN 4688:2012. Aerospace series. Paints and varnishes. Corrosion inhibiting two components cold curing primer for military application
BS EN 4689:2012. Aerospace series. Paints and varnishes. Two components cold curing polyurethane finish. High flexibility and chemical agent resistance for military application
BS EN 469:1995. Protective clothing for firefighters. Requirements and test methods for protective clothing for firefighting
BS EN 469:2005. Protective clothing for firefighters. Performance requirements for protective clothing for firefighting
BS EN 4697:2012. Aerospace series. General and installation requirements for passenger seat fittings
BS EN 47:2005. Wood preservatives. Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus). (Laboratory method)
BS EN 4700-001:2010. Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specificationPlate, sheet and strip
BS EN 4700-002:2010. Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specificationBar and section
BS EN 4700-003:2010. Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specificationTube
BS EN 4700-004:2010. Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specificationWire
BS EN 4700-005:2010. Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specificationForging stock
BS EN 4700-006:2010. Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specificationPre-production and production forgings
BS EN 4700-007:2010. Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specificationRemelting stock
BS EN 470-1:1995. Protective clothing for use in welding and allied processesGeneral requirements
BS EN 4701-001:2013. Aerospace series. Connectors, optical, rectangular, modular, operating temperature 125°C, for EN 4531-101 contactsTechnical specification
BS EN 4701-002:2013. Aerospace series. Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4531-101 contactsMaterial
BS EN 4701-003:2013. Aerospace series. Connectors, optical, rectangular, modular,operating temperature 125°C, for EN 4531-101 contactsModule series 2. Product standard
BS EN 4704:2012. Aerospace series. Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA)
BS EN 471:1994. Specification for high-visibility warning clothing
BS EN 472:1995. Pressure gauges. Vocabulary
BS EN 473:1993. General principles for qualification and certification of NDT personnel
BS EN 473:2000. Non-destructive testing. Qualification and certification of NDT personne l. General principles
BS EN 473:2008. Non-destructive testing. Qualification and certification of NDT personnel. General principles
BS EN 474-1:1995. Earth-moving machinery. SafetyGeneral requirements
BS EN 474-1:2006+A4:2013. Earth-moving machinery. SafetyGeneral requirements
BS EN 474-10:1998. Earth-moving machinery. SafetyRequirements for trenchers
BS EN 474-10:2006+A1:2009. Earth-moving machinery. SafetyRequirements for trenchers
BS EN 474-11:1998. Earth-moving machinery. SafetyRequirements for earth and landfill compactors
BS EN 474-11:2006+A1:2008. Earth-moving machinery. SafetyRequirements for earth and landfill compactors
BS EN 474-12:2006+A1:2008. Earth-moving machinery. SafetyRequirements for cable excavators
BS EN 474-2:1996. Earth-moving machinery. SafetyRequirements for tractor-dozers
BS EN 474-2:2006+A1:2008. Earth-moving machinery. SafetyRequirements for tractor-dozers
BS EN 474-3:1996. Earth-moving machinery. SafetyRequirements for loaders
BS EN 474-3:2006+A1:2009. Earth-moving machinery. SafetyRequirements for loaders
BS EN 474-4:1996. Earth-moving machinery. SafetyRequirements for backhoe loaders
BS EN 474-4:2006+A2:2012. Earth-moving machinery. SafetyRequirements for backhoe loaders
BS EN 474-5:1996. Earth-moving machinery. SafetyRequirements for hydraulic excavators
BS EN 474-5:2006+A3:2013. Earth-moving machinery. SafetyRequirements for hydraulic excavators
BS EN 474-6:1997. Earth-moving machinery. SafetyRequirements for dumpers
BS EN 474-6:2006+A1:2009. Earth-moving machinery. SafetyRequirements for dumpers
BS EN 474-7:1998. Earth-moving machinery. SafetyRequirements for scrapers
BS EN 474-7:2006+A1:2009. Earth-moving machinery. SafetyRequirements for scrapers
BS EN 474-8:1998. Earth-moving machinery. SafetyRequirements for graders
BS EN 474-8:2006+A1:2009. Earth-moving machinery. SafetyRequirements for graders
BS EN 474-9:1998. Earth-moving machinery. SafetyRequirements for pipelayers
BS EN 474-9:2006+A1:2009. Earth-moving machinery. SafetyRequirements for pipelayers
BS EN 475:1995. Medical devices. Electrically-generated alarm signals
BS EN 476:1998. General requirements for components used in discharge pipes, drains and sewers for gravity systems
BS EN 476:2011. General requirements for components used in drains and sewers
BS EN 477:1999. Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Determination of the resistance to impact of main profiles by falling mass
BS EN 478:1999. Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Appearance after exposure at 150°C. Test method
BS EN 479:1999. Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Determination of heat reversion
BS EN 48:2005. Wood preservatives. Determination of eradicant action against larvae of Anobium punctatum (De Geer) (laboratory method)
BS EN 4800-001:2010. Aerospace series. Titanium and titanium alloys. Technical specificationPlate, sheet and strip
BS EN 4800-002:2010. Aerospace series. Titanium and titanium alloys. Technical specificationBar and section
BS EN 4800-003:2010. Aerospace series. Titanium and titanium alloys. Technical specificationTube
BS EN 4800-004:2010. Aerospace series. Titanium and titanium alloys. Technical specificationWire
BS EN 4800-005:2010. Aerospace series. Titanium and titanium alloys. Technical specificationForging stock
BS EN 4800-006:2010. Aerospace series. Titanium and titanium alloys. Technical specificationPre-production and production forgings
BS EN 4800-007:2010. Aerospace series. Titanium and titanium alloysRemelting stock
BS EN 4800-008:2010. Aerospace series. Titanium and titanium alloys. Technical specificationPre-production and production castings
BS EN 480-1:1998. Admixtures for concrete, mortar and grout. Test methodsReference concrete and reference mortar for testing
BS EN 480-1:2006+A1:2011. Admixtures for concrete, mortar and grout. Test methodsReference concrete and reference mortar for testing
BS EN 480-10:1997. Admixtures for concrete, mortar and grout. Test methodsDetermination of water soluble chloride content
BS EN 480-10:2009. Admixtures for concrete, mortar and grout. Test methodsDetermination of water soluble chloride content
BS EN 480-11:1999. Admixtures for concrete, mortar and grout. Test methodsDetermination of air void characteristics in hardened concrete
BS EN 480-11:2005. Admixtures for concrete, mortar and grout. Test methodsDetermination of air void characteristics in hardened concrete
BS EN 480-12:1998. Admixtures for concrete, mortar and grout. Test methodsDetermination of the alkali content of admixtures
BS EN 480-12:2005. Admixtures for concrete, mortar and grout. Test methodsDetermination of the alkali content of admixtures
BS EN 480-13:2002. Admixtures for concrete, mortar and grout. Test methodsReference masonry mortar for testing mortar admixtures
BS EN 480-13:2009+A1:2011. Admixtures for concrete, mortar and grout. Test methodsReference masonry mortar for testing mortar admixtures
BS EN 480-14:2006. Admixtures for concrete, mortar and grout. Test methodsDetermination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test
BS EN 480-15:2013. Admixtures for concrete, mortar and grout. Test methodsReference concrete and method for testing viscosity modifying admixtures
BS EN 480-2:1997. Admixtures for concrete, mortar and grout. Test methodsDetermination of setting time
BS EN 480-2:2006. Admixtures for concrete, mortar and grout. Test methodsDetermination of setting time
BS EN 480-4:1997. Admixtures for concrete, mortar and grout. Test methodsDetermination of bleeding of concrete
BS EN 480-4:2005. Admixtures for concrete, mortar and grout. Test methodsDetermination of bleeding of concrete
BS EN 480-5:1997. Admixtures for concrete, mortar and grout. Test methodsDetermination of capillary absorption
BS EN 480-5:2005. Admixtures for concrete, mortar and grout. Test methodsDetermination of capillary absorption
BS EN 480-6:1997. Admixtures for concrete, mortar and grout. Test methodsInfrared analysis
BS EN 480-6:2005. Admixtures for concrete, mortar and grout. Test methodsInfrared analysis
BS EN 480-8:1997. Admixtures for concrete, mortar and grout. Test methodsDetermination of the conventional dry material content
BS EN 480-8:2012. Admixtures for concrete, mortar and grout. Test methodsDetermination of the conventional dry material content
BS EN 481:1993, BS 6069-3.5:1993. Workplace atmospheres. Size fraction definitions for measurement of airborne particles
BS EN 4817:2012. Aerospace series. Passive UHF RFID tags intended for aircraft use
BS EN 4818:2012. Aerospace series. Passive HF RFID tags intended for aircraft use
BS EN 4819:2012. Aerospace series. Contact Memory Button (CMB) tags intended for aircraft use
BS EN 482:1994, BS 6069-3.6:1994. Workplace atmospheres. General requirements for the performance of procedures for the measurement of chemical agents
BS EN 482:2006. Workplace atmospheres. General requirements for the performance of procedures for the measurement of chemical agents
BS EN 482:2012. Workplace exposure. General requirements for the performance of procedures for the measurement of chemical agents
BS EN 483:1999+A4:2007. Gas-fired central heating boilers. Type C boilers of nominal heat input not exceeding 70 kW
BS EN 484:1998. Specification for dedicated liquefied petroleum gas appliances. Independent hotplates, including those incorporating a grill for outdoor use
BS EN 485-1:1994. Aluminium and aluminium alloys. Sheet, strip and plateTechnical conditions for inspection and delivery
BS EN 485-1:2008+A1:2009. Aluminium and aluminium alloys. Sheet, strip and plateTechnical conditions for inspection and delivery
BS EN 485-2:1995. Aluminium and aluminium alloys. Sheet, strip and plateMechanical properties
BS EN 485-2:2004. Aluminium and aluminium alloys. Sheet, strip and plateMechanical properties
BS EN 485-2:2007. Aluminium and aluminium alloys. Sheet, strip and plateMechanical properties
BS EN 485-2:2008. Aluminium and aluminium alloys. Sheet, strip and plateMechanical properties
BS EN 485-3:1994. Aluminium and aluminium alloys. Sheet, strip and plateTolerances on shape and dimensions for hot-rolled products
BS EN 485-3:2003. Aluminium and aluminium alloys. Sheet, strip and plateTolerances on dimensions and form for hot-rolled products
BS EN 485-4:1994. Aluminium and aluminium alloys. Sheet, strip and plateTolerances on shape and dimensions for cold-rolled products
BS EN 486:1994. Aluminium and aluminium alloys. Extrusion ingots. Specifications
BS EN 486:2009. Aluminium and aluminium alloys. Extrusion ingots. Specifications
BS EN 487:1994. Aluminium and aluminium alloys. Rolling ingots. Specifications
BS EN 487:2009. Aluminium and aluminium alloys. Rolling ingots. Specifications
BS EN 488:1995. Preinsulated bonded pipe systems for underground hot water networks. Steel valve assembly of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 488:2003. District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 488:2011. District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 489:1995. Preinsulated bonded pipe systems for underground hot water networks. Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 489:2003. District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 489:2009. District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 490:1994. Concrete roofing tiles and fittings. Product specifications
BS EN 490:2004+A1:2006. Concrete roofing tiles and fittings for roof covering and wall cladding. Product specifications
BS EN 490:2011. Concrete roofing tiles and fittings for roof covering and wall cladding. Product specifications
BS EN 49-1:1992. Wood preservatives. Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survivalApplication by surface treatment (laboratory method)
BS EN 491:1994. Concrete roofing tiles and fittings. Test methods
BS EN 491:2004. Concrete roofing tiles and fittings for roof covering and wall cladding.Test methods
BS EN 49-1:2005. Wood preservatives. Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survivalApplication by surface treatment (laboratory method)
BS EN 491:2011. Concrete roofing tiles and fittings for roof covering and wall cladding. Test methods
BS EN 49-2:1992. Wood preservatives. Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survivalApplication by impregnation (laboratory method)
BS EN 492:1994. Fibre-cement slates and their fittings for roofing. Product specification and test methods
BS EN 492:2004. Fibre cement slates and fittings. Product specification and test methods
BS EN 49-2:2005. Wood preservatives. Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survivalApplication by impregnation (laboratory method)
BS EN 492:2012. Fibre-cement slates and fittings. Product specification and test methods
BS EN 493:1992. Fasteners. Surface discontinuities. Nuts
BS EN 494:1994. Fibre-cement profiled sheets and fittings for roofing. Product specification and test methods
BS EN 494:2004. Fibre-cement profiled sheets and fittings. Product specification and test methods
BS EN 494:2012. Fibre-cement profiled sheets and fittings. Product specification and test methods
BS EN 495-5:2001. Flexible sheets for waterproofing. Determination of foldability at low temperaturePlastic and rubber sheets for roof waterproofing
BS EN 495-5:2013. Flexible sheets for waterproofing. Determination of foldability at low temperaturePlastic and rubber sheets for roof waterproofing
BS EN 497:1998. Specification for dedicated liquefied petroleum gas appliances. Multi-purpose boiling burners for outdoor use
BS EN 498:1998. Specification for dedicated liquefied petroleum gas appliances. Barbecues for outdoor use
BS EN 498:2012. Specification for dedicated liquefied petroleum gas appliances. Barbecues for outdoor use contact grills included
BS EN 499:1995. Welding consumables. Covered electrodes for manual metal arc welding of non alloy and fine grain steels. Classification
BS EN 500-1:1996. Mobile road construction machinery. SafetyCommon requirements
BS EN 500-1:2006+A1:2009. Mobile road construction machinery. SafetyCommon requirements
BS EN 50014:1993. Electrical apparatus for potentially explosive atmospheres. General requirements
BS EN 50014:1998. Electrical apparatus for potentially explosive atmospheres. General requirements
BS EN 50015:1994. Electrical apparatus for potentially explosive atmospheres. Oil immersion 'o'
BS EN 50015:1998. Electrical apparatus for potentially explosive atmospheres. Oil immersion "o"
BS EN 50016:1996. Electrical apparatus for potentially explosive atmospheres. Pressurized apparatus 'p'
BS EN 50016:2002. Electrical apparatus for potentially explosive atmospheres. Pressurized apparatus "p"
BS EN 50017:1994. Electrical apparatus for potentially explosive atmospheres. Powder filling 'q'
BS EN 50017:1998. Electrical apparatus for potentially explosive atmospheres. Powder filling "q"
BS EN 50018:1995. Electrical apparatus for potentially explosive atmospheres. Flameproof enclosures 'd'
BS EN 50018:2000. Electrical apparatus for potentially explosive atmospheres. Flameproof enclosure 'd'
BS EN 50019:1994. Electrical apparatus for potentially explosive atmospheres. Increased safety "e"
BS EN 50019:2000. Electrical apparatus for potentially explosive atmospheres. Increased safety 'e'
BS EN 500-2:1996. Mobile road construction machinery. SafetySpecific requirements for road-milling machines
BS EN 500-2:2006+A1:2008. Mobile road construction machinery. SafetySpecific requirements for road-milling machines
BS EN 50020:1995. Electrical apparatus for potentially explosive atmospheres. Intrinsic safety 'i'
BS EN 50020:2002. Electrical apparatus for potentially explosive atmospheres. Intrinsic safety 'i'
BS EN 50021:1999. Electrical apparatus for potentially explosive atmospheres. Type of prot ection "n"
BS EN 500-3:1996. Mobile road construction machinery. SafetySpecific requirements for soil stabilization machines
BS EN 500-3:2006+A1:2008. Mobile road construction machinery. SafetySpecific requirements for soil-stabilizing machines and recycling machines
BS EN 50033:1991. Specification for construction and testing of miners' caplamps in relation to the risk of explosion, for mines susceptible to firedamp
BS EN 500-4:1996. Mobile road construction machinery. SafetySpecific requirements for compaction machines
BS EN 500-4:2006+A1:2009. Mobile road construction machinery. SafetySpecific requirements for compaction machines
BS EN 500-4:2011. Mobile road construction machinery. SafetySpecific requirements for compaction machines
BS EN 50049-1:1998, BS 6552:1998. Domestic and similar electronic equipment interconnection requirementsPeritelevision connector
BS EN 500-5:1996. Mobile road construction machinery. SafetySpecific requirements for joint cutters
BS EN 50050:2001. Electrical apparatus for potentially explosive atmospheres. Electrostatic hand-held spraying equipment
BS EN 50050:2006. Electrical apparatus for potentially explosive atmospheres. Electrostatic hand-held spraying equipment
BS EN 50054:1991. Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods
BS EN 50054:1999. Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods
BS EN 50055:1991. Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 5 % (V/V) methane in air
BS EN 50055:1999. Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 5 % (V/V) methane in air
BS EN 50056:1991. Specification for electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 100 % (V/V) methane
BS EN 50056:1999. Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 100% (V/V) methane in air
BS EN 50057:1991. Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100 % lower explosive limit
BS EN 50057:1999. Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100% lower explosive limit
BS EN 50058:1991. Specification for electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100 % (V/V) gas
BS EN 50058:1999. Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100% (V/V) gas
BS EN 50059:1991. Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing
BS EN 500-6:2006+A1:2008. Mobile road construction machinery. SafetySpecific requirements for paver-finishers
BS EN 50062:1992. Specification for ceramic pressurized hollow insulators for high-voltage switchgear and controlgear
BS EN 50065-1:1992. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHzGeneral requirements, frequency bands and electromagnetic disturbances
BS EN 50065-1:2001+A1:2010. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHzGeneral requirements, frequency bands and electromagnetic disturbances
BS EN 50065-1:2011. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHzGeneral requirements, frequency bands and electromagnetic disturbances
BS EN 50065-2-1:2003. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHzImmunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments
BS EN 50065-2-2:2003. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHzImmunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments
BS EN 50065-2-3:2003. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 KhzImmunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors
BS EN 50065-4-1:2002. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filtersGeneric specification
BS EN 50065-4-2:2002. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz. Low voltage decoupling filtersSafety requirements
BS EN 50065-4-3:2003. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filtersIncoming filter
BS EN 50065-4-4:2003. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filtersImpedance filter
BS EN 50065-4-5:2003. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filtersSegmentation filter
BS EN 50065-4-6:2004. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHzLow voltage decoupling filters. Phase coupler
BS EN 50065-4-7:2005. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHzPortable low voltage decoupling filters. Safety requirements
BS EN 50065-7:2001. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHzEquipment impedance
BS EN 50066:1993. Specification for mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles
BS EN 50067:1991. Specification of the radio data system (RDS)
BS EN 50067:1992. Specification for radio data system (RDS)
BS EN 50067:1998. Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 to 108,0 MHz
BS EN 50068:1991. Specification for wrought steel enclosures for gas-filled high-voltage switchgear and controlgear
BS EN 50069:1991+A1:1993. Specification for welded composite enclosures of cast and wrought aluminium alloys for gas-filled high- voltage switchgear and controlgear
BS EN 50072:1992, BS 5724-2.29:1992. Medical electrical equipment. Particular requirements for safety. Specification for peritoneal dialysis equipment
BS EN 50073:1999. Guide for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen
BS EN 50075:1991. Specification for flat non-wirable two-pole plugs 2.5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes
BS EN 50077:1993. Specification for low profile connectors (IS-1) for implantable pacemakers
BS EN 50078:1994. Torches and guns for arc welding
BS EN 50080:1991. Specification for RF characteristics of MAC AM-VSB cable receivers
BS EN 50081-1:1992. Electromagnetic compatibility. Generic emission standardResidential, commercial and light industry
BS EN 50081-2:1994. Electromagnetic compatibility. Generic emission standardIndustrial environment
BS EN 50082-1:1992. Electromagnetic compatibility. Generic immunity standardResidential, commercial and light industry
BS EN 50082-1:1998. Electromagnetic compatibility. Generic immunity standardResidential, commercial and light industry
BS EN 50082-2:1995. Electromagnetic compatibility. Generic immunity standardIndustrial environment
BS EN 50083-1:1994. Cabled distribution systems for television and sound signalsSafety requirements
BS EN 50083-10:1999. Cabled distribution systems for television and sound signalsSystem performance for return paths
BS EN 50083-2:1995. Cabled distribution systems for television and sound signalsElectromagnetic compatibility for equipment
BS EN 50083-2:2001. Cabled distribution systems for television and sound signalsElectromagnetic compatibility for equipment
BS EN 50083-2:2006. Cable networks for television signals, sound signals and interactive servicesElectromagnetic compatibility for equipment
BS EN 50083-2:2012. Cable networks for television signals, sound signals and interactive servicesElectromagnetic compatibility for equipment
BS EN 50083-3:1995. Cabled distribution systems for television and sound signalsActive coaxial wideband distribution equipment
BS EN 50083-3:1999. Cabled distribution systems for television and sound signalsActive wideband equipment for coaxial cable networks
BS EN 50083-4:1995. Cabled distribution systems for television and sound signalsPassive coaxial wideband distribution equipment
BS EN 50083-4:1999. Cabled distribution systems for television and sound signalsPassive wideband equipment for coaxial cable networks
BS EN 50083-5:1994. Cabled distribution systems for television and sound signalsHeadend equipment
BS EN 50083-5:2002. Cabled distribution systems for television and sound signalsHeadend equipment
BS EN 50083-6:1995. Cabled distribution systems for television and sound signalsOptical equipment
BS EN 50083-6:1998. Cabled distribution systems for television and sound signalsOptical equipment
BS EN 50083-7:1996+A1:2000. Cable networks for television signals, sound signals and interactive servicesSystem performance
BS EN 50083-8:2002+A11:2008. Cable networks for television signals, sound signals and interactive servicesElectromagnetic compatibility for networks
BS EN 50083-9:1997. Cabled distribution systems for television and sound signalsInterfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams
BS EN 50083-9:1999. Cabled distribution systems for television and sound signalsInterfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams
BS EN 50083-9:2002. Cabled distribution systems for television and sound signalsInterfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams
BS EN 50084:1992. Specification for safety of household and similar electrical appliances. Requirements for the connection of washing machines, dishwashers and tumbler dryers to the water mains
BS EN 50085-1:1999. Cable trunking and cable ducting systems for electrical installations.General requirements
BS EN 50085-1:1999. Cable trunking and cable ducting systems for electrical installationsGeneral requirements
BS EN 50085-1:2005. Cable trunking systems and cable ducting systems for electrical installationsGeneral requirements
BS EN 50085-2-1:2006+A1:2011. Cable trunking systems and cable ducting systems for electrical installationsCable trunking systems and cable ducting systems intended for mounting on walls and ceilings
BS EN 50085-2-2:2008. Cable trunking systems and cable ducting systems for electrical installationsParticular requirements for cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor
BS EN 50085-2-3:2001. Cable trunking and cable ducting systems for electrical installations.Particular requirements for slotted cable trunking systems intended for installation in cabinets
BS EN 50085-2-3:2010. Cable trunking systems and cable ducting systems for electrical installationsParticular requirements for slotted cable trunking systems intended for installation in cabinets
BS EN 50085-2-4:2009. Cable trunking systems and cable ducting systems for electrical installationsParticular requirements for service poles and service posts
BS EN 50086-1:1994. Specification for conduit systems for cable managementGeneral requirements
BS EN 50086-2-1:1996. Specification for conduit systems for cable management. Particular requirementsRigid conduit systems
BS EN 50086-2-2:1996. Specification for conduit systems for cable management. Particular requirementsPliable conduit systems
BS EN 50086-2-3:1996. Specification for conduit systems for cable management. Particular requirementsFlexible conduit systems
BS EN 50086-2-4:1994. Specification for conduit systems for cable management. Particular requirementsConduit systems buried underground
BS EN 50087:1993. Safety of household and similar electrical appliances. Particular requirements for bulk-milk coolers
BS EN 50088:1996. Safety of electric toys
BS EN 50089:1992. Specification for cast resin partitions for metal-enclosed gas-filled high-voltage switchgear and controlgear
BS EN 50090-1:2011. Home and building electronic systems (HBES)Standardization structure
BS EN 50090-2-1:1996. Home and building electronic systems (HBES)System overview. Architecture
BS EN 50090-2-2:1996+A2:2007. Home and building electronic systems (HBES)System overview. General technical requirements
BS EN 50090-2-3:2005. Home and building electronic systems (HBES)System overview. General functional safety requirements for products intended to be integrated in HBES
BS EN 50090-3-1:1996. Home and building electronic systems (HBES)Aspects of application. Introduction to the application structure
BS EN 50090-3-2:1996. Home and building electronic systems (HBES)Aspects of application. User process
BS EN 50090-3-2:2004. Home and building electronic systems (HBES)Aspects of application
BS EN 50090-3-3:2009. Home and building electronic systems (HBES)Aspects of application. HBES Interworking model and common HBES data types
BS EN 50090-4-1:2004. Home and building electronic systems (HBES)Media independent layers
BS EN 50090-4-2:2004. Home and building electronic systems (HBES)Media independent layers
BS EN 50090-4-3:2007. Home and building electronic systems (HBES)Media independent layers. Communication over IP
BS EN 50090-5-1:2005. Home and building electronic systems (HBES)Media and media dependent layers. Power line for HBES Class 1
BS EN 50090-5-2:2004. Home and building electronic systems (HBES)Media and media dependent layers
BS EN 50090-5-3:2006. Home and building electronic systems (HBES)Media and media dependent layers. Radio frequency
BS EN 50090-7-1:2004. Home and building electronic systems (HBES)System management
BS EN 50090-8:2001. Home and building electronic systems (HBES)Conformity assessment of products
BS EN 50090-9-1:2004. Home and building electronic systems (HBES)Installation requirements
BS EN 50091-1:1993. Specification for uninterruptible power systems (UPS)General and safety requirements
BS EN 50091-1-1:1997. Uninterruptible power systems (UPS)General and safety requirements for UPS used in operator access areas
BS EN 50091-1-2:1999. Specification for uninterruptible power systems (UPS)General and safety requirements for UPS used in restricted access locations
BS EN 50091-2:1996. Specification for uninterruptible power systems (UPS)EMC requirements
BS EN 50094:1993. Access control system for the MAC/packet family: EUROCRYPT
BS EN 50098-1:1994. Customer premises cabling for information technologyISDN basic access
BS EN 50098-1:1999. Customer premises cabling for information technologyISDN basic access
BS EN 50098-2:1996. Customer premises cabling for information technology2048 kbit/s ISDN primary access and leased line network interface
BS EN 501:1994. Roofing products from metal sheet. Specifications for fully supported roofing products of zinc sheet
BS EN 50103:1996. Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for the active (including active implantable) medical device industry
BS EN 50104:1996. Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
BS EN 50104:1999. Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
BS EN 50104:2002. Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
BS EN 50104:2010. Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
BS EN 50106:1997. Specification for safety of household and similar electrical appliances. Particular rules for routine tests referring to appliances under the scope of BS EN 60335-1 and BS EN 60967
BS EN 50106:2008. Safety of household and similar electrical appliances. Particular rules for routine tests referring to appliances under the scope of EN 60335-1
BS EN 50107:1998. Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV
BS EN 50107-1:2002. Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kVGeneral requirements
BS EN 50107-2:2005. Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kVRequirements for earth-leakage and open-circuit protective devices
BS EN 50109-1:1996. Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applicationsGeneral requirements and tests
BS EN 50109-2-1:1996. Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirementsRadio frequency connectors and concentric contacts. Open throat tools with fixed dies, sizes A to E, V and W
BS EN 50109-2-2:1995. Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applicationsParticular requirements for radio frequency connectors and concentric contacts. Open throat tools with removable and interchangeable dies, sizes A to G, Q to T, V and W
BS EN 50109-2-3:1996. Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirementsContacts of electrical connectors
BS EN 50109-2-4:1996. Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirementsCentre contacts of RF connectors, series SMZ
BS EN 50109-2-5:1996. Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirementsTermination of twin-ax cable for databus applications
BS EN 50110-1:1997. Operation of electrical installationsMinimum requirements
BS EN 50110-1:2004. Operation of electrical installations
BS EN 50110-1:2013. Operation of electrical installationsGeneral requirements
BS EN 50110-2:1997. Operation of electrical installationsNational annexes
BS EN 50110-2:2010. Operation of electrical installationsNational annexes
BS EN 50112:1996. Measurement, control, regulation. Electrical temperature sensors. Metal protecting tubes for TC assemblies
BS EN 50113:1996. Measurement, control, regulation. Electrical temperature sensors. Isolating tubes for thermocouples
BS EN 50116:1996. Information technology equipment. Routine electrical safety testing in production
BS EN 50116:2006. Information technology equipment. Routine electrical safety testing in production
BS EN 50117-1:1997. Coaxial cablesGeneric specification
BS EN 50117-1:2002+A2:2013. Coaxial cablesGeneral specification
BS EN 50117-2:1996. Coaxial cablesSectional specification for indoor drop cables
BS EN 50117-2-1:2002. Coaxial cables. Sectional specification for cables used in cabled distribution networksIndoor drop cables for systems operating at 5 MHz - 1000 MHz
BS EN 50117-2-1:2005+A2:2013. Coaxial cablesSectional specification for cables used in cabled distribution networks. Indoor drop cables for systems operating at 5 MHz-1000 MHz
BS EN 50117-2-2:2004+A2:2013. Coaxial cablesSectional specification for cables used in cabled distribution networks. Outdoor drop cables for systems operating at 5 MHz-1000 MHz
BS EN 50117-2-3:2004+A2:2013. Coaxial cablesSectional specification for cables used in cabled distribution networks. Distribution and trunk cables for systems operating at 5 MHz - 1000 MHz
BS EN 50117-2-4:2004+A2:2013. Coaxial cablesSectional specification for cables used in cabled distribution networks. Indoor drop cables for systems operating at 5 MHz-3000 MHz
BS EN 50117-2-5:2004+A2:2013. Coaxial cablesSectional specification for cables used in cabled distribution networks. Outdoor drop cables for systems operating at 5 MHz-3000 MHz
BS EN 50117-3:1996. Coaxial cables used in cabled distribution networksSectional specification for outdoor drop cables
BS EN 50117-3-1:2002. Coaxial cables. Sectional specifications for cables used in telecom applicationsMiniaturized cables used in digital communication systems
BS EN 50117-4:1996. Coaxial cables used in cabled distribution networksSectional specification for distribution and trunk cables
BS EN 50117-4-1:2008+A1:2013. Coaxial cablesSectional specification for cables for BCT cabling in accordance with EN 50173. Indoor drop cables for systems operating at 5 MHz - 3 000 MHz
BS EN 50117-5:1997. Coaxial cables used in cabled distribution networksSectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz
BS EN 50117-6:1997. Coaxial cables used in cabled distribution networksSectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz
BS EN 50119:2001. Railway applications. Fixed installations. Electric traction overhead contact lines
BS EN 50119:2009+A1:2013. Railway applications. Fixed installations. Electric traction overhead contact lines
BS EN 50121-1:2000. Railway applications. Electromagnetic compatibilityGeneral
BS EN 50121-1:2006. Railway applications. Electromagnetic compatibilityGeneral
BS EN 50121-2:2000. Railway applications. Electromagnetic compatibilityEmission of the whole railway system to the outside world
BS EN 50121-2:2006. Railway applications. Electromagnetic compatibilityEmissions of the whole railway system to the outside world
BS EN 50121-3-1:2000. Railway applications. Electromagnetic compatibility.Rolling stock. Train and complete vehicle
BS EN 50121-3-1:2006. Railway applications. Electromagnetic compatibilityRolling stock. Train and complete vehicle
BS EN 50121-3-2:2000. Railway applications. Electromagnetic compatibilityRolling stock. Apparatus
BS EN 50121-3-2:2006. Railway applications. Electromagnetic compatibilityRolling stock. Apparatus
BS EN 50121-4:2000. Railway applications. Electromagnetic compatibilityEmission and immunity of the signalling and telecommunications apparatus
BS EN 50121-4:2006. Railway applications. Electromagnetic compatibilityEmission and immunity of the signalling and telecommunications apparatus
BS EN 50121-5:2000. Railway applications. Electromagnetic compatibilityEmission and immunity of fixed power supply installations and apparatus
BS EN 50121-5:2006. Railway applications. Electromagnetic compatibilityEmission and immunity of fixed power supply installations and apparatus
BS EN 50122-1:1998. Railway applications. Fixed installationsProtective provisions relating to electrical safety and earthing
BS EN 50122-1:2011+A1:2011. Railway applications. Fixed installations. Electrical safety, earthing and the return circuitProtective provisions against electric shock
BS EN 50122-2:1999. Railway applications. Fixed installationsProtective provisions against the effects of stray currents caused by d.c. traction systems
BS EN 50122-2:2010. Railway applications. Fixed installations. Electrical safety, earthing and the return circuitProvisions against the effects of stray currents caused by d.c. traction systems
BS EN 50122-3:2010. Railway applications. Fixed installations. Electrical safety, earthing and the return circuitMutual Interaction of a.c. and d.c. traction systems
BS EN 50123-1:1996. Railway applications. Fixed installations. D.C. switchgearGeneral
BS EN 50123-1:2003. Railway applications. Fixed installations. D.C. switchgearGeneral
BS EN 50123-2:1996. Railway applications. Fixed installations. d.c. switchgeard.c. circuit breakers
BS EN 50123-2:2003. Railway applications. Fixed installations. D.C. switchgearD.C. circuit breakers
BS EN 50123-3:1996. Railway applications. Fixed installations. d.c. switchgearIndoor d.c. disconnectors and switch-disconnectors
BS EN 50123-3:2003+A1:2013. Railway applications. Fixed installations. D.C. switchgearIndoor d.c. disconnectors, switch-disconnectors and earthing switches
BS EN 50123-4:1999. Railway applications. Fixed installations. d.c. switchgearOutdoor d.c. in-line switch-disconnectors, disconnectors and d.c. earthing switches
BS EN 50123-4:2003. Railway applications. Fixed installations. D.C. switchgearOutdoor d.c. disconnectors, switch-disconnectors and earthing switches
BS EN 50123-5:1999. Railway applications. Fixed installations. d.c. switchgearSurge arresters and low-voltage limiters for specific use in d.c. systems
BS EN 50123-5:2003. Railway applications. Fixed installations. D.C. switchgearSurge arresters and low-voltage limiters for specific use in d.c. systems
BS EN 50123-6:1999. Railway applications. Fixed installations. D.C. switchgearD.C. switchgear assemblies
BS EN 50123-6:2003. Railway applications. Fixed installations. D.C. switchgearD.C. switchgear assemblies
BS EN 50123-7-1:2003. Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systemsMeasurement, control and protection devices for specific use in d.c. traction systems. Application guide
BS EN 50123-7-2:1999. Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systemsIsolating current transducers and current measuring devices
BS EN 50123-7-2:2003. Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systemsIsolating current transducers and other current measuring devices
BS EN 50123-7-3:1999. Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systemsIsolating voltage transducers and other voltage measuring devices
BS EN 50123-7-3:2003. Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systemsIsolating voltage transducers and other voltage measuring devices
BS EN 50124-1:2001+A2:2005. Railway applications. Insulation coordinationBasic requirements. Clearances and creepage distances for all electrical and electronic equipment
BS EN 50124-2:2001. Railway applications. Insulation coordinationOvervoltages and related protection
BS EN 50125-1:1999. Railway applications. Environmental conditions for equipmentEquipment on board rolling stock
BS EN 50125-2:2002. Railway applications. Environmental conditions for equipmentFixed electrical installations
BS EN 50125-3:2003. Railway applications. Environmental conditions for equipmentEquipment for signalling and telecommunications
BS EN 50126-1:1999. Railway applications. The specification and demonstration of reliability, availability, maintainability and safety (RAMS)Basic requirements and generic process
BS EN 50128:2001. Railway applications. Communications, signalling and processing systems. Software for railway control and protection systems
BS EN 50128:2011. Railway applications. Communication, signalling and processing systems. Software for railway control and protection systems
BS EN 50129:2003. Railway applications. Communication, signalling and processing systems. Safety related electronic systems for signalling
BS EN 50130-4:1996. Alarm systemsElectromagnetic compatibility. Product family standard: Immunity requirements for components of fire, intruder and social alarm systems
BS EN 50130-4:2011. Alarm systemsElectromagnetic compatibility. Product family standard. Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems
BS EN 50130-5:1999. Alarm systemsEnvironmental test methods
BS EN 50130-5:2011. Alarm systemsEnvironmental test methods
BS EN 50131-1:1997. Alarm systems. Intrusion systemsGeneral requirements
BS EN 50131-1:2006+A1:2009. Alarm systems. Intrusion and hold-up systemsSystem requirements
BS EN 50131-2-2:2008. Alarm systems. Intrusion and hold-up systemsIntrusion detectors. Passive infrared detectors
BS EN 50131-2-3:2008. Alarm systems. Intrusion and hold-up systemsRequirements for microwave detectors
BS EN 50131-2-4:2008. Alarm systems. Intrusion and hold-up systemsRequirements for combined passive infrared and microwave detectors
BS EN 50131-2-5:2008. Alarm systems. Intrusion and hold-up systemsRequirements for combined passive infrared and ultrasonic detectors
BS EN 50131-2-6:2008. Alarm systems. Intrusion and hold-up systemsOpening contacts (magnetic)
BS EN 50131-2-7-2:2012. Alarm systems. Intrusion and hold-up systemsIntrusion detectors. Glass break detectors (passive)
BS EN 50131-3:2009. Alarm systems. Intrusion and hold-up systemsControl and indicating equipment
BS EN 50131-4:2009. Alarm systems. Intrusion and hold-up systemsWarning devices
BS EN 50131-5-3:2005+A1:2008. Alarm systems. Intrusion systemsRequirements for interconnections equipment using radio frequency techniques
BS EN 50131-6:1998. Alarm systems. Intrusion systemsPower supplies
BS EN 50131-6:2008. Alarm systems. Intrusion and hold-up systemsPower supplies
BS EN 50131-8:2009. Alarm systems. Intrusion and hold-up systemsSecurity fog device/systems
BS EN 50132-1:2010. Alarm systems. CCTV surveillance systems for use in security applicationsSystem requirements
BS EN 50132-2-1:1998. Alarm systems. CCTV surveillance systems for use in security applications.Black and white cameras
BS EN 50132-4-1:2001. Alarm systems. CCTV surveillance systems for use in security applicationsBlack and white monitors
BS EN 50132-5:2001. Alarm systems. CCTV surveillance systems for use in security applicationsVideo transmission
BS EN 50132-5-1:2012. Alarm systems. CCTV surveillance systems for use in security applicationsVideo transmission. General video transmission performance requirements
BS EN 50132-5-2:2011. Alarm systems. CCTV surveillance systems for use in security applicationsIP Video Transmission Protocols
BS EN 50132-5-3:2012. Alarm systems. CCTV surveillance systems for use in security applicationsVideo transmission. Analogue and digital video transmission
BS EN 50132-7:1996. Alarm systems. CCTV surveillance systems for use in security applicationsApplication guidelines
BS EN 50132-7:2012. Alarm systems. CCTV surveillance systems for use in security applicationsApplication guidelines
BS EN 50133-1:1997. Alarm systems. Access control systems for use in security applicationsSystem requirements
BS EN 50133-2-1:2000. Alarm systems. Access control systems for use in security applications.General requirements for components
BS EN 50133-7:1999. Alarm systems. Access control systems for use in security applicationsApplication guidelines
BS EN 50134-1:2002. Alarm systems. Social alarm systemsSystem requirements
BS EN 50134-2:2000. Alarm systems. Social alarm systemsTrigger devices
BS EN 50134-3:2001. Alarm systems. Social alarm systemsLocal unit and controller
BS EN 50134-3:2012. Alarm systems. Social alarm systemsLocal unit and controller
BS EN 50134-5:2004. Alarm systems. Social alarm systemsInterconnections and communications
BS EN 50134-7:1996. Alarm systems. Social alarm systemsApplication guidelines
BS EN 50136-1:2012. Alarm systems. Alarm transmission systems and equipmentGeneral requirements for alarm transmission systems
BS EN 50136-1-1:1998+A2:2008. Alarm systems. Alarm transmission systems and equipmentGeneral requirements for alarm transmission systems
BS EN 50136-1-2:1998. Alarm systems. Alarm transmission systems and equipment.Requirements for systems using dedicated alarm paths
BS EN 50136-1-3:1998. Alarm systems. Alarm transmission systems and equipment.Requirements for systems with digital communicators using the public switched telephone network
BS EN 50136-1-4:1998. Alarm systems. Alarm transmission systems and equipment.Requirements for systems with voice communicators using the public switched telephone network
BS EN 50136-1-5:2008. Alarm systems. Alarm transmission systems and equipmentRequirements for packet switched network PSN
BS EN 50136-2-1:1998. Alarm systems. Alarm transmission systems and equipment.General requirements for alarm transmission equipment
BS EN 50136-2-2:1998. Alarm systems. Alarm transmission systems and equipment.Requirements for equipment used in systems using dedicated alarm paths
BS EN 50136-2-3:1998. Alarm systems. Alarm transmission systems and equipment.Requirements for equipment used in systems with digital communicators using the public switched telephone network
BS EN 50136-2-4:1998. Alarm systems. Alarm transmission systems and equipment.Requirements for equipment used in systems with voice communicators using the public switched telephone network
BS EN 50136-3:2013. Alarm systems. Alarm transmission systems and equipmentRequirements for Receiving Centre Transceiver (RCT)
BS EN 50143:1999. Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV
BS EN 50143:2009. Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1000 V but not exceeding 10000 V
BS EN 50144-1:1996. Safety of hand-held electric motor operated toolsGeneral requirements
BS EN 50144-1:1999. Safety of hand-held electric motor operated toolsGeneral requirements
BS EN 50144-2-1:1996. Safety of hand-held electric motor operated tools.Particular requirements for drills
BS EN 50144-2-1:2000. Safety of hand-held electric motor operated toolsParticular requirements for drills
BS EN 50144-2-10:1996. Safety of hand-held electric motor operated tools.Particular requirements for jig saws
BS EN 50144-2-10:2001. Safety of hand-held electric motor operated tools.Particular requirements for jig saws
BS EN 50144-2-11:1997. Safety of hand-held electric motor operated tools.Particular requirements for sabre saws and double blade reciprocating saws
BS EN 50144-2-13:2002. Safety of hand-held electric motor operated tools.Particular requirements for chain saws
BS EN 50144-2-14:1997. Safety of hand-held electric motor operated tools.Specification for planers
BS EN 50144-2-14:2001. Safety of hand-held electric motor operated tools.Particular requirements for planers
BS EN 50144-2-15:1997. Safety of hand-held electric motor operated tools.Particular requirements for hedge trimmers
BS EN 50144-2-15:2001. Safety of hand-held electric motor operated tools.Particular requirements for hedge trimmers
BS EN 50144-2-16:2003. Safety of hand-held electric motor operated tools.Particular requirements for tackers
BS EN 50144-2-17:2000. Safety of hand-held electric motor operated tools.Particular requirements for routers
BS EN 50144-2-18:2000. Safety of hand-held electric motor operated tools.Particular requirements for laminate trimmers
BS EN 50144-2-2:1996. Safety of hand-held electric motor operated tools.Particular requirements for screwdrivers and impact wrenches
BS EN 50144-2-2:2000. Safety of hand-held electric motor operated toolsParticular requirements for screwdrivers and impact wrenches
BS EN 50144-2-3:2002. Safety of hand-held electric motor operated tools.Particular requirements for grinders, disk type sanders and polishers
BS EN 50144-2-4:1996. Safety of hand-held electric motor operated tools.Particular requirements for sanders
BS EN 50144-2-4:2000. Safety of hand-held electric motor operated toolsParticular requirements for sanders
BS EN 50144-2-5:1996. Safety of hand-held electric motor operated tools.Particular requirements for circular saws and circular knives
BS EN 50144-2-5:2000. Safety of hand-held electric motor operated toolsParticular requirements for circular saws and circular knives
BS EN 50144-2-6:1997. Safety of hand-held electric motor operated tools.Specification for hammers
BS EN 50144-2-6:2001. Safety of hand-held electric motor operated tools.Particular requirements for hammers
BS EN 50144-2-7:1996. Safety of hand-held electric motor operated tools.Particular requirements for spray guns
BS EN 50144-2-7:2001. Safety of hand-held electric motor operated tools.Particular requirements for spray guns
BS EN 50144-2-8:1996. Safety of hand-held electric motor operated tools.Particular requirements for sheet metal shears and nibblers
BS EN 50144-2-9:1996. Safety of hand-held electric motor operated tools.Particular requirements for tappers
BS EN 50146:2000. Cable ties for electrical installations
BS EN 50147-1:1997. Anechoic chambersShield attenuation measurement
BS EN 50147-2:1997. Anechoic chambersAlternative test site suitability with respect to site attenuation
BS EN 50148:1996. Electronic taximeters
BS EN 50149:2001. Railway applications. Fixed installations. Electric traction. Copper and copper alloy grooved contact wires
BS EN 50149:2001. Railway applications. Fixed installations. Electric traction. Copper and copper alloy grooved contact wires
BS EN 50149:2012. Railway applications. Fixed installations. Electric traction. Copper and copper alloy grooved contact wires
BS EN 50151:2003. Railway applications. Fixed installations. Electric traction. Special requirements for composite insulators
BS EN 50152-1:2007. Railway applications. Fixed installations. Particular requirements for a.c. switchgearSingle-phase circuit-breakers with Un above 1 kV
BS EN 50152-1:2012+A1:2013. Railway applications. Fixed installations. Particular requirements for alternating current switchgearCircuit-breakers with nominal voltage above 1 kV
BS EN 50152-2:2007. Railway applications. Fixed installations. Particular requirements for a.c. switchgearSingle-phase disconnectors, earthing switches and switches with Un above 1 kV
BS EN 50152-2:2012. Railway applications. Fixed installations. Particular requirements for alternating current switchgearDisconnectors, earthing switches and switches with nominal voltage above 1 kV
BS EN 50152-3-1:2003. Railway applications. Fixed installations. Particular requirements for a.c. switchgearMeasurement, control and protection devices for specific use in a.c. traction systems
BS EN 50152-3-2:2001. Railway applications. Fixed installations. Particular requirements for a.c. switchgear. Measurement, control and protection devices for specific use in a.c. traction systemsSingle-phase current transformers
BS EN 50152-3-3:2001. Railway applications. Fixed installations. Particular requirements for a.c. switchgear. Measurement, control and protection devices for specific use in a.c. traction systemsSingle-phase inductive voltage transformers
BS EN 50153:1997. Railway applications. Rolling stock. Protective provisions relating to electrical hazards
BS EN 50153:2002. Railway applications. Rolling stock. Protective provisions relating to electrical hazards
BS EN 50155:1996. Railway applications. Electronic equipment used on rolling stock
BS EN 50155:2001. Railway applications. Electronic equipment used on rolling stock
BS EN 50155:2007. Railway applications. Electronic equipment used on rolling stock
BS EN 50156-1:2004. Electrical equipment for furnaces and ancillary equipmentRequirements for application design and installation
BS EN 50157-1:1999. Domestic and similar electronic equipment interconnection requirements: AV. linkGeneral
BS EN 50157-2-1:1997. Domestic and similar electronic equipment interconnection requirements: AV. link.Signal quality matching and automatic selection of source devices
BS EN 50157-2-1:1999. Domestic and similar electronic equipment interconnection requirements: AV. link.Signal quality matching and automatic selection of source devices
BS EN 50157-2-2:1999. Domestic and similar electronic equipment interconnection requirements: AV. link.Basis system oriented commands
BS EN 50157-2-3:1999. Domestic and similar electronic equipment interconnection requirements: AV. link.System oriented application
BS EN 50159:2010. Railway applications. Communication, signalling and processing systems. Safety-related communication in transmission systems
BS EN 50159-1:2001. Railway applications. Communication, signalling and processing systemsSafetyrelated communication in closed transmission systems
BS EN 50159-2:2001. Railway applications. Communication, signalling and processing systemsSafety related communication in open transmission systems
BS EN 50160:1995. Voltage characteristics of electricity supplied by public distribution systems
BS EN 50160:2000. Voltage characteristics of electricity supplied by public distribution systems
BS EN 50160:2007. Voltage characteristics of electricity supplied by public distribution networks
BS EN 50160:2010. Voltage characteristics of electricity supplied by public electricity networks
BS EN 50162:2004. Protection against corrosion by stray current from direct current systems
BS EN 50163:1996. Railway applications. Supply voltages of traction systems
BS EN 50163:2004+A1:2007. Railway applications. Supply voltages of traction systems
BS EN 50164-1:2000. Lightning protection components (LPC)Requirements for connection components
BS EN 50164-1:2008. Lightning protection components (LPC)Requirements for connection components
BS EN 50164-2:2002. Lightning protection components (LPC)Requirements for conductors and earth electrodes
BS EN 50164-2:2008. Lightning protection components (LPC)Requirements for conductors and earth electrodes
BS EN 50164-3:2006+A1:2009. Lightning protection components (LPC)Requirements for isolating spark gaps
BS EN 50164-4:2008. Lightning protection components (LPC)Requirements for conductor fasteners
BS EN 50164-5:2009. Lightning protection components (LPC)Requirements for earth electrode inspection housings and earth electrode seals
BS EN 50164-6:2009. Lightning protection components (LPC)Requirements for lightning strike counters
BS EN 50164-7:2008. Lightning protection components (LPC)Requirements for earthing enhancing compounds
BS EN 50165:1997. Electrical equipment of non-electric appliances for household and similar purposes. Safety requirements
BS EN 50167:1996. Sectional specification for horizontal floor wiring cables with a common overall screen for use in digital communication
BS EN 50168:1996. Sectional specification for work area wiring cables with a common overall screen for use in digital communication
BS EN 50169:1996. Sectional specification for backbone cables, riser and campus, with a common overall screen for use in digital communication
BS EN 50170:1997, EN 50170:1996. General purpose field communication system
BS EN 50171:2001. Central power supply systems
BS EN 50172:2004, BS 5266-8:2004. Emergency escape lighting systems
BS EN 50173:1996. Information technology. Generic cabling systems
BS EN 50173-1:2002. Information technology. Generic cabling systemsGeneral requirements and office areas
BS EN 50173-1:2007+A1:2009. Information technology. Generic cabling systemsGeneral requirements
BS EN 50173-1:2011. Information technology. Generic cabling systemsGeneral requirements
BS EN 50173-2:2007+A1:2010. Information technology. Generic cabling systemsOffice premises
BS EN 50173-3:2007+A1:2010. Information technology. Generic cabling systemsPart 3: Industrial premises
BS EN 50173-4:2007+A2:2012. Information technology. Generic cabling systemsHomes
BS EN 50173-5:2007+A2:2012. Information technology. Generic cabling systemsData centres
BS EN 50174-1:2001. Information technology. Cabling installationSpecification and quality assurance
BS EN 50174-1:2009+A1:2011. Information technology. Cabling installationInstallation specification and quality assurance
BS EN 50174-2:2001. Information technology. Cabling installationInstallation planning and practices inside buildings
BS EN 50174-2:2009+A1:2011. Information technology. Cabling installationInstallation planning and practices inside buildings
BS EN 50176:1997. Automatic electrostatic spraying installations for flammable liquid spraying material
BS EN 50176:2009. Stationary electrostatic application equipment for ignitable liquid coating material. Safety requirements
BS EN 50177:1997. Automatic electrostatic spraying installations for flammable coating powder
BS EN 50177:2006. Automatic electrostatic spraying equipment for flammable coating powder
BS EN 50177:2009+A1:2012. Stationary electrostatic application equipment for ignitable coating powders. Safety requirements
BS EN 50178:1998. Electronic equipment for use in power installations
BS EN 50180:1999. Bushings above 1 kV up to 36 kV and from 250 A to 3,15 kA for liquid filled transformers
BS EN 50180:2010. Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers
BS EN 50181:1999. Plug-in type bushings above 1 kV up to 36 kV and from 250 A to 1.25 kA for equipment other than liquid filled transformers
BS EN 50181:2010. Plug-in type bushings above 1 kV up to 52 kV and from 250 A to 2,50 kA for equipment other than liquid filled transformers
BS EN 50182:2001. Conductors for overhead lines. Round wire concentric lay stranded conductors
BS EN 50183:2000. Conductors for overhead lines. Aluminium-magnesium-silicon alloy wires
BS EN 50186-1:1999. Live-line washing systems for power installations with nominal voltages above 1 kVCommon requirements
BS EN 50186-2:1999. Live-line washing systems for power installations with nominal voltages above 1 kVNational annexes
BS EN 50187:1997. Gas-filled compartments for a.c. switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
BS EN 50189:2000. Conductors for overhead lines. Zinc coated steel wires
BS EN 50191:2001. Erection and operation of electrical test equipment
BS EN 50191:2010. Erection and operation of electrical test equipment
BS EN 50192:1996. Arc welding equipment. Plasma cutting systems for manual use
BS EN 50193:1997. Closed electrical instantaneous water heaters. Methods for measuring performance
BS EN 50193-1:2013. Electric instantaneous water heatersGeneral requirements
BS EN 50194:2000. Electrical apparatus for the detection of combustible gases in domestic premises. Test methods and performance requirements
BS EN 50194-1:2009. Electrical apparatus for the detection of combustible gases in domestic premisesTest methods and performance requirements
BS EN 50194-2:2006. Electrical apparatus for the detection of combustible gases in domestic premisesElectrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises. Additional test methods and performance requirements
BS EN 50195:1997. Code of practice for the safe use of fully enclosed askarel-filled electrical equipment
BS EN 50199:1996. Electromagnetic compatibility (EMC). Product standard for arc welding equipment
BS EN 502:2000. Roofing products from metal sheet. Specification for fully supported products of stainless steel sheet
BS EN 502:2013. Roofing products from metal sheet. Specification for fully supported roofing products of stainless steel sheet
BS EN 50200:2000. Method of test for resistance to fire of unprotected small cables for use in emergency circuits
BS EN 50200:2006. Method of test for resistance to fire of unprotected small cables for use in emergency circuits
BS EN 50201:1999. Interfaces for DVB-IRD
BS EN 50201:2001. Interfaces for DVB-IRD
BS EN 50203:1997. Automatic channel installation (ACI)
BS EN 50205:1998. Relays with forcibly guided (linked) contacts
BS EN 50205:2002. Relays with forcibly guided (mechanically linked) contacts
BS EN 50206-1:1998. Railway applications. Rolling stock. Pantographs. Characteristics and testsPantographs for main line vehicles
BS EN 50206-1:2010. Railway applications. Rolling stock. Pantographs. Characteristics and testsPantographs for main line vehicles
BS EN 50206-2:1999. Railway applications. Rolling stock. Pantographs. Characteristics and testsPantographs for metros and light rail vehicles
BS EN 50206-2:2010. Railway applications. Rolling stock. Pantographs. Characteristics and testsPantographs for metros and light rail vehicles
BS EN 50207:2001. Railway applications. Electronic power converters for rolling stock
BS EN 50209:1999. Test of insulation of bars and coils of high-voltage machines
BS EN 50212:1997. Connectors for thermoelectric sensors
BS EN 50214:1998. Flexible cables for lifts
BS EN 50214:2006. Flat polyvinyl chloride sheathed flexible cables
BS EN 50215:1999. Railway applications. Testing of rolling stock after completion of construction and before entry into service
BS EN 50215:2009. Railway applications. Rolling stock. Testing of rolling stock on completion of construction and before entry into service
BS EN 50216-1:2002. Power transformers and reactor fittingsGeneral
BS EN 50216-10:2009. Power transformer and reactor fittingsOil-to-air heat exchangers
BS EN 50216-11:2008. Power transformer and reactor fittingsOil and winding temperature indicators
BS EN 50216-12:2011. Power transformer and reactor fittingsFans
BS EN 50216-2:2002. Power transformers and reactor fittingsGas and oil actuated relay for liquid immersed transformers and reactors with conservator
BS EN 50216-3:2002. Power transformer and reactor fittingsProtective relay for hermetically sealed liquid-immersed transformers and reactors without gaseous cushion
BS EN 50216-4:2002. Power transformers and reactor fittingsBasic accessories (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly)
BS EN 50216-5:2002. Power transformer and reactor fittingsLiquid level, pressure and flow indicators, pressure relief devices and dehydrating breathers
BS EN 50216-6:2002. Power transformers and reactor fittingsCooling equipment. Removable radiators for oil-immersed transformers
BS EN 50216-7:2002. Power transformers and reactor fittingsElectric pumps for transformer oil
BS EN 50216-8:2005. Power transformer and reactor fittingsButterfly valves for insulating liquid circuits
BS EN 50216-9:2009. Power transformer and reactor fittingsOil-to-water heat exchangers
BS EN 50221:1997. Common interface specification for conditional access and other digital video broadcasting decoder applications
BS EN 50223:2001. Automatic electrostatic application equipment for flammable flock material
BS EN 50223:2010. Stationary electrostatic application equipment for ignitable flock material. Safety requirements
BS EN 50225:1997. Code of practice for the safe use of fully enclosed oil-filled electrical equipment which may be contaminated with PCBs
BS EN 50227:1999. Control circuit devices and switching elements proximity sensors, d.c. interface for proximity sensors and switching amplifiers (NAMUR)
BS EN 50229:1998. Electric clothes washer-dryers for household use. Methods of measuring the performance
BS EN 50229:2001. Electric clothes washer-dryers for household use. Methods of measuring the performance
BS EN 50229:2007. Electric clothes washer-dryers for household use. Methods of measuring the performance
BS EN 50237:2000. Gloves and mitts with mechanical protection for electrical purposes
BS EN 50238:2003. Railway applications. Compatibility between rolling stock and train detection systems
BS EN 50239:1999. Railway applications. Radio remote control system of traction vehicle for freight traffic
BS EN 50240:2004. Electromagnetic compatibilty (EMC). Product standard for resistance welding equipment
BS EN 50241-1:1999. Specification for open path apparatus for the detection of combustible or toxic gases and vapoursGeneral requirements and test methods
BS EN 50241-2:1999. Specification for open path apparatus for the detection of combustible or toxic gases and vapoursPerformance requirements for apparatus for the detection of combustible gases
BS EN 50242:1999. Electric dishwashers for household use. Test methods for measuring the performance
BS EN 50243:2002. Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers
BS EN 50244:2000. Electrical apparatus for the detection of combustible gases in domestic premises. Guide on the selection, installation, use and maintenance
BS EN 50248:1998. Characteristics of DAB receivers
BS EN 50249:2002. Electromagnetic locators for buried pipes and cables. Performance and safety
BS EN 50250:1999. Conversion adaptors for industrial use
BS EN 50250:2002. Conversion adaptors for industrial use
BS EN 50254:1999. High efficiency communication subsystem for small data packages
BS EN 50256:1998. Characteristics of DVB receivers
BS EN 50260-1:2002. Safety of hand-held battery-powered motor-operated tools and battery packsGeneral requirements
BS EN 50260-2-1:2002. Safety of hand-held battery-powered motor-operated tools and battery packs.Particular requirements for drills
BS EN 50260-2-10:2002. Safety of hand-held battery-powered motor-operated tools and battery packs.Particular requirements for reciprocating saws
BS EN 50260-2-14:2002. Safety of hand-held battery-powered motor-operated tools and battery packs.Particular requirements for routers and laminate trimmers
BS EN 50260-2-2:2002. Safety of hand-held battery-powered motor-operated tools and battery packs.Particular requirements for screwdrivers and impact wrenches
BS EN 50260-2-4:2002. Safety of hand-held battery-powered motor-operated tools and battery packs.Particular requirements for sanders
BS EN 50260-2-5:2002. Safety of hand-held battery-powered motor-operated tools and battery packs.Particular requirements for circular saws and circular knives
BS EN 50260-2-6:2002. Safety of hand-held battery-powered motor-operated tools and battery packs.Particular requirements for hammers
BS EN 50260-2-7:2002. Safety of hand-held battery-powered motor-operated tools and battery packs.Particular requirements for spray guns
BS EN 50261:1999. Railway applications. Mounting of electronic equipment
BS EN 50262:1999. Cable glands for electrical installations
BS EN 50263:2000. Electromagnetic compatibility (EMC). Product standard for measuring relays and protection equipment
BS EN 50264-1:2002. Railway applications. Railway rolling stock cables having special fire performance. Standard wallGeneral requirements
BS EN 50264-1:2008. Railway applications. Railway rolling stock power and control cables having special fire performanceGeneral requirements
BS EN 50264-2:2002. Railway applications. Railway rolling stock cables having special fire performance. Standard wallSingle core cables
BS EN 50264-2-1:2008. Railway applications. Railway rolling stock power and control cables having special fire performanceCables with crosslinked elastomeric insulation. Single core cables
BS EN 50264-2-2:2008. Railway applications. Railway rolling stock power and control cables having special fire performanceCables with crosslinked elastomeric insulation. Multicore cables
BS EN 50264-3:2002. Railway applications. Railway rolling stock cables having special fire performance. Standard wallMulticore cables
BS EN 50264-3-1:2008. Railway applications. Railway rolling stock power and control cables having special fire performanceCables with crosslinked elastomeric insulation with reduced dimensions. Single core cables
BS EN 50264-3-2:2008. Railway applications. Railway rolling stock power and control cables having special fire performanceCables with crosslinked elastomeric insulation with reduced dimensions. Multicore cables
BS EN 50265-1:1999. Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cableApparatus
BS EN 50265-2-1:1999. Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cable. Procedures1 kW pre-mixed flame
BS EN 50265-2-2:1999. Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cable. ProceduresDiffusion flame
BS EN 50266-1:2001. Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cablesApparatus
BS EN 50266-2-1:2001. Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. ProceduresCategory A F/R
BS EN 50266-2-2:2001. Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. ProceduresCategory A
BS EN 50266-2-3:2001. Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. ProceduresCategory B
BS EN 50266-2-4:2001. Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. ProceduresCategory C
BS EN 50266-2-5:2001. Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. ProceduresSmall cables. Category D
BS EN 50267-1:1999. Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cablesApparatus
BS EN 50267-2-1:1999. Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. ProceduresDetermination of the amount of halogen acid gas
BS EN 50267-2-2:1999. Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. ProceduresDetermination of degree of acidity of gases for materials by measuring pH and conductivity
BS EN 50267-2-3:1999. Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. ProceduresDetermination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity
BS EN 50268-1:2000. Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditionsApparatus
BS EN 50268-2:2000. Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditionsProcedure
BS EN 50270:1999. Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
BS EN 50270:2006. Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
BS EN 50271:2002. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. Requirements and tests for apparatus using software and/or digital technologies
BS EN 50271:2010. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. Requirements and tests for apparatus using software and/or digital technologies
BS EN 50272-1:2010. Safety requirements for secondary batteries and battery installationsGeneral safety information
BS EN 50272-2:2001. Safety requirements for secondary batteries and battery installationsStationary batteries
BS EN 50272-3:2002. Safety requirements for secondary batteries and battery installationsTraction batteries
BS EN 50272-4:2007. Safety requirements for secondary batteries and battery installationsBatteries for use in portable appliances
BS EN 50274:2002. Low-voltage switchgear and controlgear assemblies. Protection against electric shock. Protection against unintentional direct contact with hazardous live parts
BS EN 50281-1-1:1999. Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosuresConstruction and testing
BS EN 50281-1-2:1999. Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosuresSelection, installation and maintenance
BS EN 50281-2-1:1999. Electrical apparatus for use in the presence of combustible dust. Test methodsMethods of determining minimum ignition temperatures
BS EN 50281-3:2002. Electrical apparatus for use in the presence of combustible dustClassification of areas where combustible dusts are or may be present
BS EN 50284:1999. Special requirements for construction, test and marking of electrical apparatus of equipment group II, category 1 G
BS EN 50285:1999. Energy efficiency of electric lamps for household use. Measurement methods
BS EN 50286:2001. Electrical insulating protective clothing for low-voltage installations
BS EN 50288-1:2001. Multi-element metallic cables used in analogue and digital communication and controlGeneric specification
BS EN 50288-1:2003. Multi-element metallic cables used in analogue and digital communication and controlGeneric specification
BS EN 50288-10-1:2012. Multi-element metallic cables used in analogue and digital communication and controlSectional specification for screened cables characterized up to 500 MHz. Horizontal floor and building backbone cables
BS EN 50288-11-1:2012. Multi-element metallic cables used in analogue and digital communication and controlSectional specification for un-screened cables characterised up to 500 MHz. Horizontal and building backbone cables
BS EN 50288-2-1:2001. Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 100 MHzHorizontal and building backbone cables
BS EN 50288-2-1:2003. Multi-element metallic cables used in analogue and digital communication and controlHorizontal and building backbone cables
BS EN 50288-2-1:2013. Multi-element metallic cables used in analogue and digital communication and controlSectional specification for screened cables characterised up to 100 MHz. Horizontal and building backbone cables
BS EN 50288-2-2:2001. Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 100 MHzWork area and patch cord cables
BS EN 50288-2-2:2003. Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 100 MHzWork area and patch cord cables
BS EN 50288-2-2:2013. Multi-element metallic cables used in analogue and digital communication and controlSectional specification for screened cables characterised up to 100 MHz. Work area and patch cord cables
BS EN 50288-3-1:2001. Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables characterized up to 100 MHzHorizontal and building backbone cables
BS EN 50288-3-1:2003. Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables characterized up to 100 MHzHorizontal and building backbone cables
BS EN 50288-3-1:2013. Multi-element metallic cables used in analogue and digital communication and controlSectional specification for unscreened cables characterised up to 100 MHz. Horizontal and building backbone cables
BS EN 50288-3-2:2001. Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables characterized up to 100 MHzWork area and patch cord cables
BS EN 50288-3-2:2003. Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cablesWork area and patch cord cables
BS EN 50288-3-2:2013. Multi-element metallic cables used in analogue and digital communication and controlSectional specification for unscreened cables characterised up to 100 MHz. Work area and patch cord cables
BS EN 50288-4-1:2001. Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 600 MHzHorizontal and building backbone cables
BS EN 50288-4-1:2003. Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 600 MHzHorizontal and building backbone cables
BS EN 50288-4-1:2013. Multi-element metallic cables used in analogue and digital communication and controlSectional specification for screened cables characterised up to 600 MHz. Horizontal and building backbone cables
BS EN 50288-4-2:2001. Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 600 MHzWork area and patch cord cables
BS EN 50288-4-2:2003. Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 600 MHzWork area and patch cord cables
BS EN 50288-5-1:2003. Multi-element metallic cables used in analogue and digital communication and control.Sectional specification for screened cables characterized up to 250 MHz.
BS EN 50288-5-2:2003. Multi-element metallic cables used in analogue and digital communication and controlSectional specification for screened cables characterized up to 250 MHz
BS EN 50288-6-1:2003. Multi-element metallic cables used in analogue and digital communication and controlSectional specification for unscreened cables characterised up to 250 MHz
BS EN 50288-6-2:2003. Multi-element metallic cables used in analogue and digital communication and controlSectional specification for unscreened cables characterised up to 250 MHz
BS EN 50288-7:2005. Multi-element metallic cables used in analogue and digital communication and controlSectional specification for instrumentation and control cables
BS EN 50288-8:2012. Multi-element metallic cables used in analogue and digital communication and controlSpecification for type 1 cables characterised up to 2 MHz
BS EN 50288-9-1:2012. Multi-element metallic cables used in analogue and digital communication and controlSectional specification for screened cables characterised up to 1 000 MHz. Horizontal and building backbone cables
BS EN 50289-1-1:2001. Communication cables. Specifications for test methods. Electrical test methodsGeneral requirements
BS EN 50289-1-10:2002. Communication cables. Specifications for test methods. Electrical test methodsCrosstalk
BS EN 50289-1-11:2002. Communication cables. Specifications for test methods. Electrical test methodsCharacteristic impedance, input impedance, return loss
BS EN 50289-1-12:2005. Communication cables. Specifications for test methodsElectrical test methods
BS EN 50289-1-13:2004. Communication cables. Specifications for test methodsElectrical test methods
BS EN 50289-1-14:2004. Communication cables. Specifications for test methodsElectrical test methods
BS EN 50289-1-15:2004. Communication cables. Specifications for test methodsElectromagnetic performance
BS EN 50289-1-16:2007. Communication cables. Specifications for test methodsElectromagnetic performance. Coupling attenuation of cable assemblies (field conditions)
BS EN 50289-1-2:2001. Communication cables. Specifications for test methods. Electrical test methodsDC resistance
BS EN 50289-1-3:2001. Communication cables. Specifications for test methods. Electrical test methodsDielectric strength
BS EN 50289-1-4:2001. Communication cables. Specifications for test methods. Electrical test methodsInsulation resistance
BS EN 50289-1-5:2001. Communication cables. Specifications for test methods. Electrical test methodsCapacitance
BS EN 50289-1-6:2002. Communication cables. Specifications for test methods. Electrical test methodsElectromagnetic performance
BS EN 50289-1-7:2001. Communication cables. Specifications for test methods. Electrical test methodsVelocity of propagation
BS EN 50289-1-8:2001. Communication cables. Specifications for test methods. Electrical test methodsAttentuation
BS EN 50289-1-9:2002. Communication cables. Specifications for test methods. Electrical test methodsUnbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss)
BS EN 50289-3-1:2001. Communication cables. Specifications for test methods. Mechanical test methodsGeneral requirements
BS EN 50289-3-10:2004. Communication cables. Specifications for tests methodsMechanical test methods. Torsion and twisting
BS EN 50289-3-11:2001. Communication cables. Specifications for test methods. Mechanical test methodsCable cut-through resistance
BS EN 50289-3-12:2001. Communication cables. Specifications for test methods. Mechanical test methodsShot gun damage
BS EN 50289-3-13:2003. Communication cables. Specifications for test methods. Mechanical test methodsAeolian vibration
BS EN 50289-3-15:2003. Communication cables. Specifications for test methods. Mechanical test methodsUnderwater cable resistance to hydrostatic pressure
BS EN 50289-3-16:2001. Communication cables. Specifications for test methods. Mechanical test methodsCable tensile performance
BS EN 50289-3-17:2002. Communication cables. Specifications for test methods. Mechanical test methodsAdhesion of dielectric and sheath
BS EN 50289-3-2:2001. Communication cables. Specifications for test methods. Mechanical test methodsTensile strength and elongation for conductor
BS EN 50289-3-4:2001. Communication cables. Specifications for test methods. Mechanical test methodsTensile strength, elongation and shrinkage of insulation and sheath
BS EN 50289-3-5:2001. Communication cables. Specifications for test methods. Mechanical test methodsCrush resistance of the cable
BS EN 50289-3-6:2001. Communication cables. Specifications for test methods. Mechanical test methodsImpact resistance of the cable
BS EN 50289-3-7:2001. Communication cables. Specifications for test methods. Mechanical test methodsAbrasion resistance of the cable sheath
BS EN 50289-3-8:2001. Communication cables. Specifications for test methods. Mechanical test methodsAbrasion resistance of cable sheath markings
BS EN 50289-3-9:2001. Communication cables. Specifications for test methods. Mechanical test methodsBending tests
BS EN 50289-4-1:2001. Communication cables. Specifications for test methods. Environmental test methodsGeneral requirements
BS EN 50289-4-11:2002. Communication cables. Specifications for test methods. Environmental test methodsA horizontal integrated fire test method
BS EN 50289-4-12:2004. Communication cables. Specifications for test methodsEnvironmental test methods
BS EN 50289-4-14:2003. Communication cables. Specifications for test methods. Environmental test methodsLightning
BS EN 50289-4-16:2012. Communication cables. Specifications for test methodsEnvironmental test methods. Circuit integrity under fire conditions
BS EN 50289-4-17:2011. Communication cables. Specifications for test methodsTest methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
BS EN 50289-4-2:2001. Communication cables. Specifications for test methods. Environmental test methodsWater penetration
BS EN 50289-4-4:2008. Communication cables. Specifications for test methodsEnvironmental test methods. Resistance to solvents and contaminating fluids
BS EN 50289-4-5:2008. Communication cables. Specifications for test methodsEnvironmental test methods. Climatic sequence
BS EN 50289-4-6:2001. Communication cables. Specifications for test methods. Environmental test methodsTemperature cycling
BS EN 50289-4-7:2008. Communication cables. Specifications for test methodsEnvironmental test methods. Damp heat, steady state
BS EN 50289-4-9:2001. Communication cables. Specifications for test methods. Environmental test methodsPneumatic resistance
BS EN 50290-1-1:2001. Communication cables.General
BS EN 50290-1-2:2004. Communication cablesDefinitions
BS EN 50290-2-1:2005. Communication cablesCommon design rules and construction
BS EN 50290-2-20:2001. Communication cables. Common design rules and constructionGeneral
BS EN 50290-2-21:2002. Communication cables Common design rules and construction. PVC insulation compounds
BS EN 50290-2-22:2002. Communication cables Common design rules and construction. PVC sheathing compounds
BS EN 50290-2-23:2002. Communication cables. Common design rules and constructionPE insulation
BS EN 50290-2-24:2002+A1:2008. Communication cablesCommon design rules and construction. PE sheathing
BS EN 50290-2-25:2002. Communication cables. Common design rules and constructionPolypropylene insulation compounds
BS EN 50290-2-26:2002. Communication cablesCommon design rules and construction. Halogen free flame retardant insulation compounds
BS EN 50290-2-27:2002+A1:2007. Communication cablesCommon design rules and construction. Halogen free flame retardant thermoplastic sheathing compounds
BS EN 50290-2-28:2002. Communication cables. Common design rules and constructionFilling compounds for filled cables
BS EN 50290-2-29:2002. Communication cables. Common design rules and constructionCross-linked PE insulation compounds
BS EN 50290-2-30:2002. Communication cables. Common design rules and constructionPoly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing
BS EN 50290-4-1:2002. Communication cables. General considerations for the use of cablesEnvironmental conditions and safety aspects
BS EN 50290-4-2:2008. Communication cablesGeneral considerations for the use of cables. Guide to use
BS EN 50291:2001. Electrical apparatus for the detection of carbon monoxide in domestic premises. Test methods and performance requirements
BS EN 50291-1:2010+A1:2012. Electrical apparatus for the detection of carbon monoxide in domestic premisesTest methods and performance requirements
BS EN 50291-2:2010. Electrical apparatus for the detection of carbon monoxide in domestic premisesElectrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft. Additional test methods and performance requirements
BS EN 50292:2002. Electrical apparatus for the detection of carbon monoxide in domestic premises. Guide on the selection, installation, use and maintenance
BS EN 50293:2001. Electromagnetic compatibility. Road traffic signal systems. Product standard
BS EN 50293:2012. Road traffic signal systems. Electromagnetic compatibility
BS EN 50294:1998. Measurement method of total input power of ballast-lamp circuits
BS EN 50295:1999. Low-voltage switchgear and controlgear. Controller and device interface systems. Actuator sensor interface (AS-i)
BS EN 50298:1999. Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements
BS EN 50301:2001. Methods of measurement for the power consumption of audio, video and related equipment
BS EN 50303:2000. Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust
BS EN 50304:2001. Electric ovens for household use. Methods for measuring energy consumption
BS EN 50304:2009+A1:2010, BS EN 60350:2009. Electric cooking ranges, hobs, ovens and grills for household use. Methods for measuring performance
BS EN 50305:2002. Railway applications. Railway rolling stock cables having special fire performance. Test methods
BS EN 50306-1:2002. Railway applications. Railway rolling stock cables having special fire performance. Thin wallGeneral requirements
BS EN 50306-2:2002. Railway applications. Railway rolling stock cables having special fire performance. Thin wallSingle core cables
BS EN 50306-3:2002. Railway applications. Railway rolling stock cables having special fire performance. Thin wallSingle core and multicore cables (pairs, triples and quads) screened and thin wall sheathed
BS EN 50306-4:2002. Railway applications. Railway rolling stock cables having special fire performance. Thin wallMulticore and multipair cables standard wall sheathed
BS EN 50307:2002. Lead and lead alloys. Lead and lead alloy sheaths and sleeves of electric cables
BS EN 50308:2004. Wind turbines. Protective measures. Requirements for design, operation and maintenance
BS EN 50310:2000. Application of equipotential bonding and earthing in buildings with information technology equipment
BS EN 50310:2006. Application of equipotential bonding and earthing in buildings with information technology equipment
BS EN 50310:2010. Application of equipotential bonding and earthing in buildings with information technology equipment
BS EN 50311:2003. Railway applications. Rolling stock. D.C. supplied electronic ballasts for lighting fluorescent lamps
BS EN 50317:2002+A2:2007. Railway applications. Current collection systems. Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
BS EN 50317:2012. Railway applications. Current collection systems. Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
BS EN 50318:2002. Railway applications. Current collection systems. Validation of simulation of the dynamic interaction between pantograph and overhead contact line
BS EN 50319:1999. Proximity devices. Requirements for proximity devices with analogue output
BS EN 50320:2001. Digital audio broadcasting system. Specification of the DAB command set for receivers (DCSR)
BS EN 50321:2000. Electrically insulating footwear for working on low voltage installations
BS EN 50324-1:2002. Piezoelectric properties of ceramic materials and componentsTerms and definitions
BS EN 50324-2:2002. Piezoelectric properties of ceramic materials and componentsMethods of measurement. Low power
BS EN 50324-3:2002. Piezoelectric properties of ceramic materials and componentsMethods of measurement. High power
BS EN 50325-1:2001. Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfacesGeneral requirements
BS EN 50325-1:2002. Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfacesGeneral requirements
BS EN 50325-2:2001. Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfacesDeviceNet
BS EN 50325-3:2001. Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfacesSmart distributed systems (SDS)
BS EN 50325-4:2002. Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfacesCANopen
BS EN 50325-5:2010. Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfacesFunctional safety communication based on EN 50325-4
BS EN 50326:2002. Conductors for overhead lines. Characteristics of greases
BS EN 50327:2003. Railway applications. Fixed installations. Harmonisation of the rated values for converter groups and tests on converter groups
BS EN 50328:2003. Railway applications. Fixed installations. Electronic power convertors for substations
BS EN 50329:2003+A1:2010. Railway applications. Fixed installations. Traction transformers
BS EN 50332-1:2000. Sound system equipment. Headphones and earphones associated with portable audio equipment. Maximum sound pressure level measurement methodology and limit considerationsGeneral method for "one package equipment"
BS EN 50333:2001. Audio, video and similar electronic apparatus. Routine electrical safety testing in production
BS EN 50334:2001. Marking by inscription for the identification of cores of electric cables
BS EN 50336:2002. Bushings for transformers and reactor cable boxes not exceeding 36 kV
BS EN 50338:2001. Safety of household and similar electrical appliances. Particular requirements for pedestrian controlled battery powered electrical lawn-mowers
BS EN 50338:2006. Safety of household and similar electrical appliances. Particular requirements for pedestrian-controlled battery powered electrical lawnmowers
BS EN 50340:2001. Hydraulic cable cutting devices. Devices to be used on electrical installations with nominal voltage up to AC 30 kV
BS EN 50340:2010. Hydraulic cable cutting devices. Devices to be used on electrical installations with nominal voltage up to AC 30 kV
BS EN 50341 Parts 1-3:2001 (CD-ROM). Overhead electrical lines exceeding AC 45 kV
BS EN 50341-1:2001+A1:2009. Overhead electrical lines exceeding AC 45 kVGeneral requirements. Common specifications
BS EN 50341-1:2012. Overhead electrical lines exceeding AC 1 kVGeneral requirements. Common specifications
BS EN 50341-2:2001. Overhead electrical lines exceeding AC 45 kV Part 2: Index of National Normative Aspects
BS EN 50341-2:2001. Overhead electrical lines exceeding AC 45 kVIndex of national normative aspects
BS EN 50341-3:2001. Overhead electrical lines exceeding AC 45 kV Part 3: Set of National Normative Aspects
BS EN 50341-3:2001. Overhead electrical lines exceeding AC 45 kVSet of National Normative Aspects
BS EN 50342:2001. Lead-acid starter batteries. General requirements, methods of test and numbering
BS EN 50342-1:2006+A1:2011. Lead-acid starter batteriesGeneral requirements and methods of test
BS EN 50342-2:2007. Lead-acid starter batteriesDimensions of batteries and marking of terminals
BS EN 50342-3:2008. Lead-acid starter batteriesTerminal system for batteries with 36 V nominal voltage
BS EN 50342-4:2009. Lead-acid starter batteriesDimensions of batteries for heavy vehicles
BS EN 50342-5:2010. Lead-acid starter batteriesProperties of battery housings and handles
BS EN 50343:2003. Railway applications. Rolling stock. Rules for installation of cabling
BS EN 50344-1:2002. Routine tests for controls within the scope of the EN 60730 seriesGeneral requirements
BS EN 50345:2004. Railway applications. Fixed installations. Electric traction. Insulating synthetic rope assemblies for support of overhead contact lines
BS EN 50345:2009. Railway applications. Fixed installations. Electric traction. Insulating synthetic rope assemblies for support of overhead contact lines
BS EN 50346:2002+A2:2009. Information technology. Cabling installation. Testing of installed cabling
BS EN 50347:2001. General purpose three-phase induction motors having standard dimensions and outputs. Frame numbers 56 to 315 and flange numbers 65 to 740
BS EN 50348:2002. Automatic electrostatic spraying equipment for non-flammable liquid spraying material
BS EN 50348:2010. Stationary electrostatic application equipment for non-ignitable liquid coating material. Safety requirements
BS EN 50350:2004. Charging control systems for household electric room heating of the storage type. Methods for measuring performance
BS EN 50353:2001. Insulating oil. Determination of fibre contamination by the counting method using a microscope
BS EN 50355:2003. Railway applications. Railway rolling stock cables having special fire performance. Thin wall and standard wall. Guide to use
BS EN 50355:2013. Railway applications. Railway rolling stock cables having special fire performance. Guide to use
BS EN 50356:2002. Method for spark testing of cables
BS EN 50357:2001. Evaluation of human exposure to electromagnetic fields from devices used in electronic article surveillance (EAS), radio frequency identification (RFID) and similar applications
BS EN 50360:2001+A1:2012. Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz - 3 GHz)
BS EN 50361:2001 (CAD files). Basic standard for the measurement of specific absorption rate related to human exposure to electromagnetic fields from mobile phones (300 MHz - 3 GHz)
BS EN 50361:2001. Basic standard for the measurement of specific absorption rate related to human exposure to electromagnetic fields from mobile phones (300 MHz - 3 GHz)
BS EN 50362:2003. Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits
BS EN 50363-0:2005. Insulating, sheathing and covering materials for low voltage energy cablesGeneral introduction
BS EN 50363-0:2011. Insulating, sheathing and covering materials for low-voltage energy cablesGeneral introduction
BS EN 50363-1:2005. Insulating, sheathing and covering materials for low voltage energy cablesCross-linked elastomeric insulating compounds
BS EN 50363-10-1:2005. Insulating, sheathing and covering materials for low-voltage energy cablesMiscellaneous sheathing compounds. Cross-linked polyvinyl chloride (XLPVC)
BS EN 50363-10-2:2005. Insulating, sheathing and covering materials for low-voltage energy cablesMiscellaneous sheathing compounds. Thermoplastic polyurethane
BS EN 50363-2-1:2005+A1:2011. Insulating, sheathing and covering materials for low voltage energy cablesCross-linked elastomeric sheathing compounds
BS EN 50363-2-2:2005. Insulating, sheathing and covering materials for low voltage energy cablesCross-linked elastomeric covering compounds
BS EN 50363-3:2005+A1:2011. Insulating, sheathing and covering materials for low voltage energy cablesPVC insulating compounds
BS EN 50363-4-1:2005. Insulating, sheathing and covering materials for low voltage energy cablesPVC sheathing compounds
BS EN 50363-4-2:2005. Insulating, sheathing and covering materials for low voltage energy cablesPVC covering compounds
BS EN 50363-5:2005+A1:2011. Insulating, sheathing and covering materials for low voltage energy cablesHalogen-free, cross-linked insulating compounds
BS EN 50363-6:2005+A1:2011. Insulating, sheathing and covering materials for low voltage energy cablesHalogen-free, cross-linked sheathing compounds
BS EN 50363-7:2005. Insulating, sheathing and covering materials for low voltage energy cablesHalogen-free, thermoplastic insulating compounds
BS EN 50363-8:2005+A1:2011. Insulating, sheathing and covering materials for low voltage energy cablesHalogen-free, thermoplastic sheathing compounds
BS EN 50363-9-1:2005. Insulating, sheathing and covering materials for low-voltage energy cablesMiscellaneous insulating compounds. Cross-linked polyvinyl chloride (XLPVC)
BS EN 50364:2002. Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 10 GHz, used in electronic article surveillance (EAS), radio frequency identification (RFID) and similar applications
BS EN 50364:2010. Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in electronic article surveillance (EAS), radio frequency identification (RFID) and similar applications
BS EN 50365:2002. Electrically insulating helmets for use on low voltage installations
BS EN 50366:2003+A1:2006. Household and similar electrical appliances. Electromagnetic fields. Methods for evaluation and measurement
BS EN 50367:2006. Railway applications. Current collection systems. Technical criteria for the interaction between pantograph and overhead line (to achieve free access)
BS EN 50367:2012. Railway applications. Current collection systems. Technical criteria for the interaction between pantograph and overhead line (to achieve free access)
BS EN 50368:2003. Cable cleats for electrical installations
BS EN 50369:2005. Liquid tight sheathing systems for cable management
BS EN 50370-1:2005. Electromagnetic compatibility (EMC). Product family standard for machine toolsEmission
BS EN 50370-2:2003. Electromagnetic compatibility (EMC). Product family standard for machine toolsImmunity
BS EN 50371:2002. Generic standard to demonstrate the compliance of low power electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (10 MHz - 300 GHz). General public
BS EN 50374:2004. Conductor cars
BS EN 50375:2002. Testing methodology for wipers used in electrical insulating oil
BS EN 50377-10-1:2003. Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications.Type MU-PC terminated on IEC 60793-2 category B1.1 singlemode fibre
BS EN 50377-10-1:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsType MU-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C
BS EN 50377-10-2:2005. Connectors sets and interconnect components to be used in optical fibre communication systems. Product specificationsMU/APC singlemode terminated on IEC 60793-2 category B1 fibre
BS EN 50377-11-1:2008. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsType MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C
BS EN 50377-13-2:2011. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsType LX.5-PC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
BS EN 50377-13-3:2011. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsType LX.5-APC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
BS EN 50377-14-1:2011. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsCords with IEC 60793-2-50 singlemode category B1.1 and B1.3 fibre for category C
BS EN 50377-15-1:2011. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsType MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre
BS EN 50377-16-1:2011. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsType LF3 APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C
BS EN 50377-2-1:2001. Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications.Type FC-PC terminated on IEC 60793-2 category B1 singlemode fibre
BS EN 50377-2-2:2009. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsFC/APC 8 terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule, category C
BS EN 50377-3-1:2001. Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications.Type SG terminated on IEC 60793-2 category A1a and A1b multimode fibre
BS EN 50377-3-1:2008. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsType SG terminated on IEC 60793-2-10 category A1a, A1b or equivalent multimode fibre for category C
BS EN 50377-4-2:2011. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsType SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
BS EN 50377-4-4:2011. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsType SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
BS EN 50377-5-1:2003. Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsType EC terminated on IEC 60793-2 category B.1.1 singlemode fibre
BS EN 50377-6-1:2002. Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications.Type SC-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre
BS EN 50377-6-2:2004. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsType SC-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre
BS EN 50377-6-2:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsSC-RJ single mode terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, category U
BS EN 50377-7-1:2004. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsType LC-PC duplex terminated on IEC 60793-2 category A1a and A1b multimode fibre
BS EN 50377-7-2:2004. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsLC-PC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre
BS EN 50377-7-3:2004. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsType LC-APC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre
BS EN 50377-7-4:2004. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsLC-PC simplex terminated on IEC 60793-2 category B1.1 singlemode fibre
BS EN 50377-7-4:2011. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsLC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with full zirconia ferrule for category C
BS EN 50377-8-10:2010. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsType LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C
BS EN 50377-8-11:2010. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsType LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C
BS EN 50377-8-12:2010. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsType LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U
BS EN 50377-8-13:2010. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsType LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U
BS EN 50377-8-2:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsType LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C
BS EN 50377-8-3:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsLSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C
BS EN 50377-8-4:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsLSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U
BS EN 50377-8-5:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsLSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U
BS EN 50377-8-6:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsLSH-HR simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C
BS EN 50377-8-7:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsLSH-PC terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C
BS EN 50377-8-8:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsLSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
BS EN 50377-8-9:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsLSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
BS EN 50377-9-1:2003. Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications.Type MT-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre
BS EN 50377-9-2:2004. Connector sets and interconnect components to be used in optical fibre communication systems. Product specificationsType MT-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre
BS EN 50378-3-1:2007. Passive components to be used in optical fibre communication systems. Product specificationsType 100/200 GHz DWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre
BS EN 50378-3-2:2007. Passive components to be used in optical fibre communication systems. Product specificationsType 4/8 channel CWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre
BS EN 50379-1:2004. Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliancesGeneral requirements and test methods
BS EN 50379-1:2012. Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliancesGeneral requirements and test methods
BS EN 50379-2:2004. Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliancesPerformance requirements for apparatus used in statutory inspections and assessment
BS EN 50379-2:2012. Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliancesPerformance requirements for apparatus used in statutory inspections and assessment
BS EN 50379-3:2004. Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliancesPerformance requirements for apparatus used in non-statutory servicing of gas fired heating appliances
BS EN 50379-3:2012. Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliancesPerformance requirements for apparatus used in non-statutory servicing of gas fired heating appliances
BS EN 50380:2003. Datasheet and nameplate information for photovoltaic modules
BS EN 50381:2004. Transportable ventilated rooms with or without an internal source of release
BS EN 50382-1:2008+A1:2013. Railway applications. Railway rolling stock high temperature power cables having special fire performanceGeneral requirements
BS EN 50382-2:2008+A1:2013. Railway applications. Railway rolling stock high temperature power cables having special fire performanceSingle core silicone rubber insulated cables for 120 °C or 150 °C
BS EN 50383:2002. Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunications system (110 MHz - 40 GHz)
BS EN 50383:2010. Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication systems (110 MHz - 40 GHz)
BS EN 50384:2002. Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields (110 MHz - 40 GHz). Occupational
BS EN 50385:2002. Product standard to demonstrate the compliances of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields (110 MHz - 40 GHz). General public
BS EN 50386:2002. Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers
BS EN 50386:2010+A1:2013. Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers
BS EN 50387:2002. Busbar bushings up to 1 kV and from 1,25 kA to 5 kA, for liquid filled transformers
BS EN 50388:2005. Railway applications. Power supply and rolling stock. Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability
BS EN 50388:2012. Railway Applications. Power supply and rolling stock. Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability
BS EN 50389:2005. Space product assurance. Wire-wrapping of high reliability electrical connections
BS EN 50390:2004. Space product assurance. The manual soldering of high-reliability electrical connections
BS EN 50392:2004. Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz)
BS EN 50393:2006. Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV
BS EN 50395:2005+A1:2011. Electrical test methods for low voltage energy cables
BS EN 50396:2005+A1:2011. Non electrical test methods for low voltage energy cables
BS EN 50397-1:2006. Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not exceeding 36 kV a.cCovered conductors
BS EN 50397-2:2009. Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV ACAccessories for covered conductors. Tests and acceptance criteria
BS EN 50397-3:2010. Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not exceeding 36 kV a.c.Guide to use
BS EN 50399:2011. Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results
BS EN 504:2000. Roofing products from metal sheet. Specification for fully supported roofing products of copper sheet
BS EN 50400:2006+A1:2012. Basic standard to demonstrate the compliance of fixed equipment for radio transmission (110 MHz - 40 GHz) intended for use in wireless telecommunication networks with the basic restrictions or the reference levels related to general public exposure to radio frequency electromagnetic fields, when put into service
BS EN 50401:2006+A1:2011. Product standard to demonstrate the compliance of fixed equipment for radio transmission (110 MHz - 40 GHz) intended for use in wireless telecommunication networks with the basic restrictions or the reference levels related to general public exposure to radio frequency electromagnetic fields, when put into service
BS EN 50402:2005+A1:2008. Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of fixed gas detection systems
BS EN 50405:2006. Railway applications. Current collection systems. Pantographs, testing methods for carbon contact strips
BS EN 50406-1:2004. End user multi-pair cables used in high bit rate telecommunication networksAerial cables
BS EN 50406-2:2004. End user multi-pair cables used in high bit rate telecommunication networksDuct and buried cables
BS EN 50407-1:2004. Multi-pair cables used in high bit rate digital access telecommunication networksOutdoor cables
BS EN 50408:2008+A1:2011. Household and similar electrical appliances. Safety. Particular requirements for cab heaters for vehicles
BS EN 50410:2008. Household and similar electrical appliances. Safety. Particular requirements for decorative robots
BS EN 50411-2:2008. Fibre organisers and closures to be used in optical fibre communication systems. Product specificationsGeneral and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors
BS EN 50411-2-2:2007. Fibre organisers and closures to be used in optical fibre communication systems. Product specificationsSealed pan fibre splice closures Type 1, for category S & A
BS EN 50411-2-2:2012. Fibre organisers and closures to be used in optical fibre communication systems. Product specificationsSealed pan fibre splice closures Type 1, for category S & A
BS EN 50411-2-3:2007. Fibre organisers and closures to be used in optical fibre communication systems. Product specificationsSealed inline fibre splice closures Type 1, for category S & A
BS EN 50411-2-3:2012. Fibre organisers and closures to be used in optical fibre communication systems. Product specificationsSealed inline fibre splice closures Type 1, for category S & A
BS EN 50411-2-4:2006. Fibre organisers and closures to be used in optical fibre communication systems. Product specificationsSealed dome fibre splice closures type 1, for category S & A
BS EN 50411-2-4:2012. Fibre organisers and closures to be used in optical fibre communication systems. Product specificationsSealed dome fibre splice closures Type 1, for category S & A
BS EN 50411-2-5:2009. Fibre organisers and closures to be used in optical fibre communication systems. Product specificationsSealed closures for air blown fibre microduct, type 1, for category S & A
BS EN 50411-2-8:2009. Fibre organisers and closures to be used in optical fibre communication systems. Product specificationsMicroduct connectors, for air blown optical fibres, Type 1
BS EN 50411-2-9:2010. Fibre organisers and closures to be used in optical fibre communications systems. Product specificationsNon-sealed closures for air blown fibre microduct cable, for category S & A
BS EN 50411-3-1:2012. Fibre organisers and closures to be used in optical fibre communication systems. Product specificationsFibre management system, splice wall box, for category C & G
BS EN 50411-3-2:2011. Fibre organisers and closures to be used in optical fibre communication systems. Product specificationsSinglemode mechanical fibre splice
BS EN 50411-3-3:2011. Fibre organisers and closures to be used in optical fibre communication systems. Product specificationsSinglemode optical fibre fusion splice protectors
BS EN 50411-3-6:2013. Fibre organisers and closures to be used in optical fibre communication systems. Product specificationsMultimode mechanical fibre splice for use in an outdoor protected environment (Cat U)
BS EN 50411-6-1:2011. Fibre organisers and closures to be used in optical fibre communication systems. Product specificationsUnprotected microduct for category S and A
BS EN 50412-2-1:2005. Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHzResidential, commercial and industrial environment
BS EN 50413:2009. Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz)
BS EN 50414:2006. Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables. Method A: Total lead content determination with flame excitation atomic absorption spectrometry. Method B: Qualitative analysis of lead by lead sulphide staining
BS EN 50416:2005. Household and similar electrical appliances. Safety. Particular requirements for commercial electric conveyor dishwashing machines
BS EN 50419:2005. Marking of electrical and electronic equipment in accordance with article 11(2) of Directive 2002/96/EC (WEEE)
BS EN 50419:2006. Marking of electrical and electronic equipment in accordance with article 11(2) of Directive 2002/96/EC (WEEE)
BS EN 50420:2006. Basic standard for the evaluation of human exposure to electromagnetic fields from a stand alone broadcast transmitter (30 MHz - 40 GHz)
BS EN 50421:2006. Product standard to demonstrate the compliance of stand alone broadcast transmitters with the reference levels or the basic restrictions related to public human exposure to radio frequency electromagnetic fields (30 MHz to 40 GHz)
BS EN 50423-1:2005. Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kVGeneral requirements. Common specifications
BS EN 50423-2:2005. Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kVIndex of national normative aspects
BS EN 50423-3:2005. Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kVSet of National Normative Aspects
BS EN 50425:2008. Switches for household and similar fixed electrical installations. Collateral standard. Fireman's switches for exterior and interior signs and luminaires
BS EN 50428:2005+A2:2009. Switches for household and similar fixed electrical installations. Collateral standard. Switches and related accessories for use in home and building electronic systems (HBES)
BS EN 50436-1:2005. Alcohol interlocks. Test methods and performance requirementsInstruments for drink-driving-offender programs
BS EN 50436-2:2007. Alcohol interlocks. Test methods and performance requirementsInstruments having a mouthpiece and measuring breath alcohol for general preventive use
BS EN 50438:2007. Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks
BS EN 50441-1:2006. Cables for indoor residential telecommunication installationsUnscreened cables. Grade 1
BS EN 50441-1:2012. Cables for indoor residential telecommunication installationsUnscreened cables. Grade 1
BS EN 50441-2:2006. Cables for indoor residential telecommunication installationsScreened cables. Grade 2
BS EN 50441-2:2012. Cables for indoor residential telecommunication installations Screened cables. Grade 1
BS EN 50441-3:2006. Cables for indoor residential telecommunication installationsScreened cables. Grade 3
BS EN 50441-4:2012. Cables for indoor residential telecommunication installationsCables up to 1 200 MHz. Grade 3
BS EN 50443:2011. Effects of electromagnetic interference on pipelines caused by high voltage a.c. electric traction systems and/or high voltage a.c. power supply systems
BS EN 50444:2008. Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for arc welding and allied processes
BS EN 50445:2008. Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz)
BS EN 50446:2006. Straight thermocouple assembly with metal or ceramic protection tube and accessories
BS EN 50461:2006. Solar cells. Datasheet information and product data for crystalline silicon solar cells
BS EN 50463:2007. Railway applications. Energy measurement on board trains
BS EN 50463-1:2012. Railway applications. Energy measurement on board trainsGeneral
BS EN 50463-2:2012. Railway applications. Energy measurement on board trainsEnergy measuring
BS EN 50463-3:2012. Railway applications. Energy measurement on board trainsData handling
BS EN 50463-4:2012. Railway applications. Energy measurement on board trainsCommunication
BS EN 50463-5:2012. Railway applications. Energy measurement on board trainsConformity assessment
BS EN 50464-1:2007+A1:2012. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kVGeneral requirements
BS EN 50464-2-1:2007. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kVDistribution transformers with cable boxes on the high-voltage and/or low-voltage side. General requirements
BS EN 50464-2-2:2007. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kVDistribution transformers with cable boxes on the high-voltage and/or low-voltage side. Cable boxes type 1 for use on distribution transformers meeting the requirements of EN 50464-2-1
BS EN 50464-2-3:2007. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kVDistribution transformers with cable boxes on the high-voltage and/or low-voltage side. Cable boxes type 2 for use on distribution transformers meeting the requirements of EN 50464-2-1
BS EN 50464-3:2007. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kVDetermination of the power rating of a transformer loaded with non-sinusoidal currents
BS EN 50464-4:2007+A1:2011. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV Requirements and tests concerning pressurised corrugated tanks
BS EN 50465:2008. Gas appliances. Fuel cell gas heating appliance. Fuel cell gas heating appliance of nominal heat input inferior or equal to 70 kW
BS EN 50467:2011. Railway applications. Rolling stock. Electrical connectors, requirements and test methods
BS EN 50468:2009. Resistibility requirements to overvoltages and overcurrents due to lightning for equipment having telecommunication ports
BS EN 50470-1:2006. Electricity metering equipment (a.c.)General requirements, tests and test conditions. Metering equipment (class indexes A, B and C)
BS EN 50470-2:2006. Electricity metering equipment (a.c.)Particular requirements. Electromechanical meters for active energy (class indexes A and B)
BS EN 50470-3:2006. Electricity metering equipment (a.c.)Particular requirements. Static meters for active energy (class indexes A, B and C)
BS EN 50475:2008. Basic standard for the calculation and the measurement of human exposure to electromagnetic fields from broadcasting service transmitters in the HF bands (3 MHz - 30 MHz)
BS EN 50476:2008. Product standard to demonstrate the compliance of broadcast station transmitters with the reference levels and the basic restrictions related to public exposure to radio frequency electromagnetic fields (3 MHz - 30 MHz)
BS EN 50478:2007. Functional receiver specification of satellite digital interactive television with a low data rate return channel via satellite . Modem layer specification
BS EN 50482:2008. Instrument transformers. Three-phase inductive voltage transformers having Um up to 52kV
BS EN 50483-1:2009. Test requirements for low voltage aerial bundled cable accessoriesGeneralities
BS EN 50483-2:2009. Test requirements for low voltage aerial bundled cable accessoriesTension and suspension clamps for self supporting system
BS EN 50483-3:2009. Test requirements for low voltage aerial bundled cable accessoriesTension and suspension clamps for neutral messenger system
BS EN 50483-4:2009. Test requirements for low voltage aerial bundled cable accessoriesConnectors
BS EN 50483-5:2009. Test requirements for low voltage aerial bundled cable accessoriesElectrical ageing test
BS EN 50483-6:2009. Test requirements for low voltage aerial bundled cable accessoriesEnvironmental testing
BS EN 50486:2008. Equipment for use in audio and video door-entry systems
BS EN 50490:2008. Electrical installations for lighting and beaconing of aerodromes. Technical requirements for aeronautical ground lighting control and monitoring systems. Units for selective switching and monitoring of individual lamps
BS EN 50491-2:2010. General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS)Environmental conditions
BS EN 50491-3:2009. General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS)Electrical safety requirements
BS EN 50491-4-1:2012. General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)
BS EN 50491-5-1:2010. General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS)EMC requirements, conditions and test set-up
BS EN 50491-5-2:2010. General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS)EMC requirements for HBES/BACS used in residential, commercial and light industry environment
BS EN 50491-5-3:2010. General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS)EMC requirements for HBES/BACS used in industry environment
BS EN 50492:2008. Basic standard for the in-situ measurement of electromagnetic field strength related to human exposure in the vicinity of base stations
BS EN 50494:2007. Satellite signal distribution over a single coaxial cable in single dwelling installations
BS EN 50495:2010. Safety devices required for the safe functioning of equipment with respect to explosion risks
BS EN 50496:2008. Determination of workers' exposure to electromagnetic fields and assessment of risk at a broadcast site
BS EN 50497:2007. Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables
BS EN 50498:2010. Electromagnetic compatibility (EMC). Product family standard for aftermarket electronic equipment in vehicles
BS EN 50499:2008. Procedure for the assessment of the exposure of workers to electromagnetic fields
BS EN 505:2000. Roofing products from metal sheet. Specification for fully supported roofing products of steel sheet
BS EN 505:2013. Roofing products from metal sheet. Specification for fully supported roofing products of steel sheet
BS EN 50500:2008. Measurement procedures of magnetic field levels generated by electronic and electrical apparatus in the railway environment with respect to human exposure
BS EN 50504:2008. Validation of arc welding equipment
BS EN 50505:2008. Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for resistance welding and allied processes
BS EN 50508:2009. Multi-purpose insulating sticks for electrical operations on high voltage installations
BS EN 50512:2009. Electrical installations for lighting and beaconing of aerodromes. Advanced visual docking guidance systems (A-VDGS)
BS EN 50513:2009. Solar wafers. Data sheet and product information for crystalline silicon wafers for solar cell manufacturing
BS EN 50514:2008. Audio, video and information technology equipment. Routine electrical safety testing in production
BS EN 50516-1-1:2011. Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specificationsType SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC 61753-1-3
BS EN 50516-2-1:2011. Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specificationsType ODVA PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3
BS EN 50518-1:2010. Monitoring and alarm receiving centreLocation and construction requirements
BS EN 50518-2:2010. Monitoring and alarm receiving centreTechnical requirements
BS EN 50518-3:2011. Monitoring and alarm receiving centreProcedures and requirements for operation
BS EN 50519:2010. Assessment of workers' exposure to electric and magnetic fields of industrial induction heating equipment
BS EN 50520:2009. Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations
BS EN 50521:2008+A1:2012. Connectors for photovoltaic systems. Safety requirements and tests
BS EN 50522:2010. Earthing of power installations exceeding 1 kV a.c.
BS EN 50523-1:2009. Household appliances interworkingFunctional specification
BS EN 50523-2:2009. Household appliances interworkingData structures
BS EN 50524:2009. Data sheet and name plate for photovoltaic inverters
BS EN 50525-1:2011. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)General requirements
BS EN 50525-2-11:2011. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750V (U0/U)Cables for general applications. Flexible cables with thermoplastic PVC insulation
BS EN 50525-2-12:2011. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)Cables for general applications. Cables with thermoplastic PVC insulation for extensible leads
BS EN 50525-2-21:2011. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)Cables for general applications. Flexible cables with crosslinked elastomeric insulation
BS EN 50525-2-22:2011. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)Cables for general applications. High flexibility braided cables with crosslinked elastomeric insulation
BS EN 50525-2-31:2011. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)Cables for general applications. Single core non-sheathed cables with thermoplastic PVC insulation
BS EN 50525-2-41:2011. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)Cables for general applications. Single core cables with crosslinked silicone rubber insulation
BS EN 50525-2-42:2011. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)Cables for general applications. Single core non-sheathed cables with crosslinked EVA insulation
BS EN 50525-2-51:2011. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)Cables for general applications. Oil resistant control cables with thermoplastic PVC insulation
BS EN 50525-2-71:2011. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)Cables for general applications. Flat tinsel cables (cords) with thermoplastic PVC insulation
BS EN 50525-2-72:2011. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)Cables for general applications. Flat divisible cables (cords) with thermoplastic PVC insulation
BS EN 50525-2-81:2011. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)Cables for general applications. Cables with crosslinked elastomeric covering for arc welding
BS EN 50525-2-82:2011. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)Cables for general applications. Cables with crosslinked elastomeric insulation for decorative chains
BS EN 50525-2-83:2011. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)Cables for general applications. Multicore cables with crosslinked silicone rubber insulation
BS EN 50525-3-11:2011. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)Cables with special fire performance. Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke
BS EN 50525-3-21:2011. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)Cables with special fire performance. Flexible cables with halogen-free crosslinked insulation, and low emission of smoke
BS EN 50525-3-31:2011. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)Cables with special fire performance. Single core non-sheathed cables with halogen-free thermoplastic insulation, and low emission of smoke
BS EN 50525-3-41:2011. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)Cables with special fire performance. Single core non-sheathed cables with halogen-free crosslinked insulation, and low emission of smoke
BS EN 50526-1:2012. Railway applications. Fixed Installations. D.C. surge arresters and voltage limiting devicesSurge arresters
BS EN 50527-1:2010. Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devicesGeneral
BS EN 50527-2-1:2011. Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devicesSpecific assessment for workers with cardiac pacemakers
BS EN 50528:2010. Insulating ladders for use on or near low voltage electrical installations
BS EN 50529-1:2010. EMC network standardWire-line telecommunications networks using telephone wires
BS EN 50529-2:2010. EMC network standardWire-line telecommunications networks using coaxial cables
BS EN 50530:2010+A1:2013. Overall efficiency of grid connected photovoltaic inverters
BS EN 50532:2010. Compact equipment assembly for distribution substations (CEADS)
BS EN 50533:2011. Railway applications. Three-phase train line voltage characteristics
BS EN 50536:2011+A1:2012. Protection against lightning. Thunderstorm warning systems
BS EN 50539-11:2013. Low-voltage surge protective devices. Surge protective devices for specific application including d.c.Requirements and tests for SPDs in photovoltaic applications
BS EN 50540:2010. Conductors for overhead lines. Aluminium conductors steel supported (ACSS)
BS EN 50541-1:2011. Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3150 kVA, with highest voltage for equipment not exceeding 36 kVGeneral requirements
BS EN 50541-2:2013. Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3 150 kVA, with highest voltage for equipment not exceeding 36 kVDetermination of loadability of a transformer loaded with non-sinusoidal current
BS EN 50543:2011. Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air. Requirements and test methods
BS EN 50545-1:2011. Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnelsGeneral performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
BS EN 50547:2013. Railway applications. Batteries for auxiliary power supply systems
BS EN 50548:2011+A1:2013. Junction boxes for photovoltaic modules
BS EN 50550:2011. Power frequency overvoltage protective device for household and similar applications (POP)
BS EN 50551-1:2011. Simplex and duplex cables to be used for cordsBlank detail specification and minimum requirements
BS EN 50553:2012. Railway applications. Requirements for running capability in case of fire on board of rolling stock
BS EN 50554:2010. Basic standard for the in-situ assessment of a broadcast site related to general public exposure to radio frequency electromagnetic fields
BS EN 50556:2011. Road traffic signal systems
BS EN 50557:2011. Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses
BS EN 50561-1:2013. Power line communication apparatus used in low-voltage installations. Radio disturbance characteristics. Limits and methods of measurementApparatus for in-home use
BS EN 50563:2011. External a.c. d.c. and a.c. a.c. power supplies. Determination of no-load power and average efficiency of active modes
BS EN 50564:2011. Electrical and electronic household and office equipment. Measurement of low power consumption
BS EN 50566:2013. Product standard to demonstrate compliance of radio frequency fields from handheld and body-mounted wireless communication devices used by the general public (30 MHz - 6 GHz)
BS EN 50574:2012. Collection, logistics & treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons
BS EN 50578:2013. Railways applications. Direct current signalling relays
BS EN 50580:2012+A1:2013. Safety of hand-held electric motor operated tools. Particular requirements for spray gunsParticular requirements for spray guns
BS EN 50581:2012. Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances
BS EN 506:2000. Roofing products from metal sheet. Specification for self-supporting products of copper or zinc sheet
BS EN 506:2008. Roofing products of metal sheet. Specification for self-supporting products of copper or zinc sheet
BS EN 50600-1:2012. Information technology. Data centre facilities and infrastructuresGeneral concepts
BS EN 507:2000. Roofing products from metal sheet. Specification for fully supported roofing products of aluminium sheet
BS EN 508-1:2000. Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheetSteel
BS EN 508-1:2008. Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheetSteel
BS EN 508-2:2000. Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheetAluminium
BS EN 508-2:2008. Roofing products from metal sheet. Specification for self supporting products of steel, aluminium or stainless steel sheetAluminium
BS EN 508-3:2000. Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheetStainless steel
BS EN 508-3:2008. Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheetStainless steel
BS EN 509:2000. Decorative fuel-effect gas appliances
BS EN 510:1993. Specification for protective clothing for use where there is a risk of entanglement with moving parts
BS EN 511:1994. Specification for protective gloves against cold
BS EN 511:2006. Protective gloves against cold
BS EN 512:1995. Fibre-cement products. Pressure pipes and joints
BS EN 513:1999. Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Determination of the resistance to artificial weathering
BS EN 514:2000. Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Determination of the strength of welded corners and T-joints
BS EN 515:1993. Aluminium and aluminium alloys. Wrought products. Temper designations
BS EN 516:1995. Prefabricated accessories for roofing. Installations for roof access. Walkways, treads and steps
BS EN 516:2006. Prefabricated accessories for roofing. Installations for roof access. Walkways, treads and steps
BS EN 517:1995. Prefabricated accessories for roofing. Roof safety hooks
BS EN 517:2006. Prefabricated accessories for roofing. Roof safety hooks
BS EN 518:1995. Structural timber. Grading. Requirements for visual strength grading standards
BS EN 519:1995. Structural timber. Grading. Requirements for machine strength graded timber and grading machines
BS EN 520:2004+A1:2009. Gypsum plasterboards. Definitions, requirements and test methods
BS EN 521:1998. Specification for dedicated liquefied petroleum gas appliances. Portable vapour pressure liquefied petroleum gas appliances
BS EN 521:2006. Specifications for dedicated liquefied petroleum gas appliances. Portable vapour pressure liquefied petroleum gas appliances
BS EN 522:1998. Adhesives for leather and footwear materials. Bond strength. Minimum requirements and adhesive classification
BS EN 523:1997. Steel strip sheaths for prestressing tendons. Terminology, requirements, quality control
BS EN 523:2003. Steel strip sheaths for prestressing tendons. Terminology, requirements, quality control
BS EN 524-1:1997. Steel strip sheaths for prestressing tendons. Test methodsDetermination of shape and dimensions
BS EN 524-2:1997. Steel strip sheaths for prestressing tendons. Test methodsDetermination of flexural behaviour
BS EN 524-3:1997. Steel strip sheaths for prestressing tendons. Test methodsTo-and-fro bending test
BS EN 524-4:1997. Steel strip sheaths for prestressing tendons. Test methodsDetermination of lateral load resistance
BS EN 524-5:1997. Steel strip sheaths for prestressing tendons. Test methodsDetermination of tensile load resistance
BS EN 524-6:1997. Steel strip sheaths for prestressing tendons. Test methodsDetermination of leaktightness (determination of water loss)
BS EN 525:1998. Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW
BS EN 525:2009. Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW
BS EN 526:1995. Inland navigation vessels. Gangways with a length not exceeding 8 m. Requirements, types
BS EN 527-1:2000. Office furniture. Work tables and desksDimensions
BS EN 527-1:2011. Office furniture. Work tables and desksDimensions
BS EN 527-2:2002. Office furniture. Work tables and desksMechanical safety requirements
BS EN 527-3:2003. Office furniture. Work tables and desksMethods of test for the determination of the stability and the mechanical strength of the structure
BS EN 528:1997. Rail dependent storage and retrieval equipment. Safety
BS EN 528:2008. Rail dependent storage and retrieval equipment. Safety requirements
BS EN 529:2005. Respiratory protective devices. Recommendations for selection, use, care and maintenance. Guidance document
BS EN 530:1995. Abrasion resistance of protective clothing material. Test methods
BS EN 530:2010. Abrasion resistance of protective clothing material. Test methods
BS EN 531:1995. Protective clothing for workers exposed to heat
BS EN 532:1995. Protective clothing. Protection against heat and flame. Test method for limited flame spread
BS EN 533:1997. Protective clothing. Protection against heat and flame. Limited flame spread materials and material assemblies
BS EN 534:1998. Corrugated bitumen sheets
BS EN 534:2006+A1:2010. Corrugated bitumen sheets. Product specification and test methods
BS EN 535:1991. Method for determination of flow time of paints by use of flow cups
BS EN 536:1999. Road construction machines. Asphalt mixing plants. Safety requirements
BS EN 538:1994. Clay roofing tiles for discontinuous laying. Flexural strength test
BS EN 539-1:1994. Clay roofing tiles for discontinuous laying. Determination of physical characteristicsImpermeability test
BS EN 539-1:2005. Clay roofing tiles for discontinuous laying. Determination of physical characteristicsImpermeability test
BS EN 539-2:1998. Clay roofing tiles for discontinuous laying. Determination of physical characteristicsTest for frost resistance
BS EN 539-2:2006. Clay roofing tiles for discontinuous laying. Determination of physical characteristicsTest for frost resistance
BS EN 539-2:2013. Clay roofing tiles for discontinuous laying. Determination of physicalcharacteristicsTest for frost resistance
BS EN 540:1993. Clinical investigation of medical devices for human subjects
BS EN 541:1995. Aluminium and aluminium alloys. Rolled products for cans, closures and lids. Specifications.
BS EN 54-1:1996. Fire detection and fire alarm systemsIntroduction
BS EN 541:2006. Aluminium and aluminium alloys. Rolled products for cans, closures and lids. Specifications
BS EN 54-1:2011. Fire detection and fire alarm systemsIntroduction
BS EN 54-10:2002. Fire detection and fire alarm systemsFlame detectors. Point detectors
BS EN 54-11:2001. Fire detection and fire alarm systemsManual call points
BS EN 54-12:2002. Fire detection and fire alarm systemsSmoke detectors. Line detectors using an optical light beam
BS EN 54-13:2005. Fire detection and fire alarm systemsCompatibility assessment of system components
BS EN 54-16:2008. Fire detection and fire alarm systemsVoice alarm control and indicating equipment
BS EN 54-17:2005. Fire detection and fire alarm systemsShort-circuit isolators
BS EN 54-18:2005. Fire detection and fire alarm systemsInput/output devices
BS EN 542:1995. Adhesives. Determination of density
BS EN 54-2:1997+A1:2006. Fire detection and fire alarm systems Control and indicating equipment
BS EN 542:2003. Adhesives. Determination of density
BS EN 54-20:2006. Fire detection and fire alarm systemsAspirating smoke detectors
BS EN 54-21:2006. Fire detection and fire alarm systemsAlarm transmission and fault warning routing equipment
BS EN 54-23:2010. Fire detection and fire alarm systemsFire alarm devices. Visual alarm devices
BS EN 54-24:2008. Fire detection and fire alarm systemsComponents of voice alarm systems. Loudspeakers
BS EN 54-25:2008. Fire detection and fire alarm systemsComponents using radio links
BS EN 543:1995. Adhesives. Determination of apparent density of powder and granule adhesives
BS EN 54-3:2001. Fire detection and fire alarm systemsFire alarm devices. Sounders
BS EN 543:2003. Adhesives. Determination of apparent density of powder and granule adhesives
BS EN 544:1998. Bitumen shingles with mineral and/or synthetic reinforcements
BS EN 54-4:1998. Fire detection and fire alarm systemsPower supply equipment
BS EN 544:2005. Bitumen shingles with mineral and/or synthetic reinforcements. Product s pecification and test methods
BS EN 544:2011. Bitumen shingles with mineral and/or synthetic reinforcements. Product specification and test methods
BS EN 545:1995. Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods
BS EN 54-5:2001. Fire detection and fire alarm systemsHeat detectors. Point detectors
BS EN 545:2002. Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods
BS EN 545:2006. Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods
BS EN 545:2010. Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods

 

脚注信息
 ©2013-2024 TECERT ≥ TEST & CERTIFICATION 特色检测 - 检测认证搜索引擎 粤ICP备13066711号-2  beian 粤公网安备 44030702000495号  ❤️ 机构 ❤️
访问统计