标准编号 Standard/Code | 标准名称 Standard Title |
AATCC 163 | Colorfastness to Storage: Dye Transfer |
1.1 The storage of garments made with component parts of more than one shade sometimes results in the transfer of dye from one area to another; normally from the darker to the lighter shade. This phenomenon is distinct from sublimation because it occurs below the sublimation temperature of dyes as well as with non-subliming dyes.
1.2 Dye transfer occurs when garments are folded with different shades in intimate contact with each other. Normally the amount of dye transferred is intensified when moisture is present, and thus the problem is more severe during warm, humid weather or when garments are steamed immediately before storage. Storage in plastic bags tends to maintain the initial relative humidity of the garment environment and can aggravate or reduce transfer depending on the condition of the fabric when it enters the bag.
1.3 This test method is intended to estimate if color transfer might be expected to occur during prolonged period of storage. In general, no problems will be expected under normal conditions of storage or time-delay, if color transfer does not occur under the conditions specified.
1.4 This test method may be used also to assess potential color transfer problems that relate to finishing. Some dyes are inherently more prone to transfer than others, and some chemical finishes and finishing conditions accelerate transfer.
Test Item 测试名称:AATCC 163 Color fastness to Dye Transfer in Storage 贮存时颜色转移色牢度
Test Requirement 测试要求:
贮存时颜色转移色牢度
Sample Size 样品数量 / 送样规格: 30cm x 30cm x 2pcs or 2pcs finished products
Lead Time / TAT (Turn Around Time) 测试周期: 常规服务 Regular service 7-9 working days
Report Summary 报告摘要:
检测实验室 | TESTING LAB:
安瑞检测认证(广东)有限公司 (CNAS认可实验室)
联系人:陈小姐
电话:13420014231 (微信同号)
邮箱:orange.chen@annraytest.com
网址:www.annraytesting.com