服务搜索 SEARCH
16 CFR 1616
作者:TECERT    发布于:2014-09-16 16:29:17    检测认证一站式服务    收藏:Ctrl+D
摘要:16 CFR 1616 STANDARD FOR THE FLAMMABILITY OF CHILDREN'S SLEEPWEAR: SIZES 7 THROUGH 14 联系我们:info@tecert.com 安排检测 / Contact us for testing.

标准编号 Standard/Code 标准名称 Standard Title
16 CFR 1616 STANDARD FOR THE FLAMMABILITY OF CHILDREN'S SLEEPWEAR: SIZES 7 THROUGH 14

(a) This Standard provides a test method to determine the flammability of children's sleepwear, sizes 7 through 14 and fabric or related material intended or promoted for use in such children's sleepwear.

(b) All sleepwear items as defined in § 1616.2(c), are subject to the requirements of this Standard.

(c) Children's sleepwear items which meet all the requirements of the Standard for the Flammability of Children's Sleepwear: Sizes 0 through 6X (FF 3–71) (subpart A of part 1615 of this chapter) are in compliance with this Standard. FF 3–71 was issued July 29, 1971 (36 FR 14062), and amended July 21, 1972 (37 FR 14624).

(d) As used in this Standard, pass and fail refer to the test criteria for specimens while accept and reject refer to the acceptance or rejection of a production unit under the sampling plan.

(e) The flammability standards for clothing textiles and vinyl plastic film, parts 1610 and 1611 of this chapter, are superseded by this part 1616 insofar as they apply to items defined in § 1616.2(c).

Test Requirement 测试要求:


1. 16 CFR Part 1615:9个月~6岁童装;16 CFR Part 1616:7~14岁童装;
2. 阻燃处理后的织物一定要做水洗后测试;首个FPU必须做洗后测试。按照AATCC 35,60度洗12分钟。
3. 2/3类测试(样板服装的缝线测试,样板服装的装饰物测试)必须提供第1类测试(织物测试)通过US CPSC 16 CFR PART 1615/1616测试的证明(包括通过织物测试的FPU号,也是2/3类测试的取样范围);
4.4类测试:量产服装的成品测试必须提供通过前3类测试的相关证明;
5.5块试样为一组;若测试中有需要补测的情况,则补测的费用另计。
6.洗50次后测试常规10天以上,加急7天;若不需水洗,则测试常规5天,加急3天;2~4类测试测试提前和实验室确认后可以出Same day
7.燃烧过的样品必须退还客户,由客户按照法规保管一定时间。测试剩余样品如果不需要退还,则公司仓库大约会保管1个月。
8.如果没有一些FPU/GPU等必要的信息,我们公司只能出Reference的报告。
9. 原则上客户自己需留样(同送测样品的样品量相同)备美国CPSC抽查。



Sample Size 样品数量 / 送样规格: see below

FPU:每种花型面料的最前面几码中取一码,最后几码中取一码,并标示清楚FPU的编号。
半成品:根据成衣的设计,提供接缝,花边,绣花,印花等半成品,每种半成品至少提供15片,大小为4*10英寸。
接缝:不同的面料之间,或者不同的缝制方法须按照不同的样品处理。
花边:按照成衣的缝制方法,位置提供。
绣花或印花:最长处小于2英寸的免作,最长处大于2英寸的,将该花形按照成衣的位置绣或印到面料的最底端的中间位置,该面料尺寸:4*10英寸。如果该花形大于10 英寸,提供整个花形。
GPU:提供9套(套装)或9件成衣。标示清楚GPU的编号。

Lead Time / TAT (Turn Around Time) 测试周期: 常规服务 Regular service 7-9 working days

Report Summary 报告摘要:

检测实验室 | TESTING LAB:

安瑞检测

安瑞检测认证(广东)有限公司 (CNAS认可实验室)

联系人:陈小姐
电话:13420014231 (微信同号)
邮箱:
orange.chen@annraytest.com
网址:www.annraytesting.com

 

脚注信息
 ©2013-2024 TECERT ≥ TEST & CERTIFICATION 特色检测 - 检测认证搜索引擎 粤ICP备13066711号-2  beian 粤公网安备 44030702000495号  ❤️ 机构 ❤️
访问统计