标准编号 Standard/Code | 标准名称 Standard Title |
EN 61347-2-1 | Lamp controlgear. Particular requirements for starting devices (other than glow starters) |
This part of EN 61347 specifies particular safety requirements for starting devices (starters other than glow starters and ignitors) for fluorescent and other discharge lamps for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz which produce starting pulses not greater than 100 kV and which are used in combination with lamps and ballasts covered in EN 60081, EN 60188, EN 60192, EN 60662, EN 60901, EN 61167, EN 61195, EN 61199, EN 61347-2-8 and EN 61347-2-9. It does not apply to glow starters or starting devices which are incorporated in discharge lamps or which are manually operated. Preheat transformers for fluorescent lamps are covered by EN 61347-2-8. This first edition of EN 61347-2-1, together with EN 61347-1, cancels and replaces the second edition of EN 60926, published in 1995, and constitutes a minor revision. This standard shall be used in conjunction with EN 61347-1. It was established on the basis of the first edition (2000) of that standard.
Test Requirement 测试要求:
标志
触发器的脉冲电压
独立式启动装置的加热
防潮和绝缘
防止意外接触带电部件的措施
故障状态
机械强度
接地装置
接线端子
结构
螺钉、载流部件和连接件
耐电强度
耐腐蚀
耐热、防火及耐漏电起痕
爬电距离和电气间隙
绕组的耐热性(不适用本项要求)
Sample Size 样品数量 / 送样规格: 6pcs
Lead Time / TAT (Turn Around Time) 测试周期: 常规服务 Regular service 7-9 working days
Report Summary 报告摘要: