服务搜索 SEARCH
EN 312
作者:TECERT    发布于:2014-06-19 10:47:22    检测认证一站式服务    收藏:Ctrl+D
摘要:EN 312 Particleboards - Specifications 联系我们:info@tecert.com 安排检测 / Contact us for testing.

标准编号 Standard/Code 标准名称 Standard Title
EN 312 Particleboards - Specifications

This European Standard specifies the requirements for flat-pressed or calendar-pressed unfaced particleboards as defined in EN 309. NOTE 1 This standard is called up in EN 13986 for construction applications. Products specified in this standard are referred to in EN 13986 as resin-bonded particleboards. The values listed in this standard relate to product properties, but they are not characteristic values to be used in design calculations. NOTE 2 Such characteristic values (e.g. for use in design calculation in EN 1995-1-1) are given either in EN 12369-1 or derived by testing according to EN 789, EN 1058 and ENV 1156. Additional information on supplementary properties for certain applications is also given. NOTE 3 Particleboards in accordance with this standard may be referred to as P1 to P7-boards. Boards of type P4 to P7 are intended for use in design and construction of load-bearing or stiffening building elements, e.g. walls, flooring, roofing and I-beams (see EN 1995-1-1 and/or performance standards). This standard does not apply to extruded particleboards and flaxboards, which are standardised in EN 14755 and EN 15197 respectively.

Test Requirement 测试要求:

1 Thickness,Length and Width 厚度,长度和宽度(EN 324-1) 
2 Edge straightness 直边度(EN 324-2)
3 Squarencess tolerances 直角度(EN 324-2) 
4 Moisture content 水份含量 (EN 322)
5 Tolerance on mean density within a board (EN 323)同一面板内的平均密度误差
6 Foraldehyde potential 甲醛释放量(EN 120)
7 Foraldehyde potential 甲醛释放量(EN 717-1)
 Selective Requirement 个别要求
 Type P1: general purpose board for use in dry conditions
1 Internal bond 内部结合强度(EN 319)
2 Bending strength 抗弯强度 (EN 310)
 Type P2: for interior fitments (including furniture) for use in dry conditions
 Type P4: for load-bearing boards for use in dry conditions
 Type P6: for heavy duty load-bearing boards for use in dry conditions
1 Internal bond 内部结合强度(EN 319)
2 Modulus of elasticity in bending (EN 310)抗弯弹性模数
3 Bending strength 抗弯强度 (EN 310)
4 Surface soundness 表面稳固性 (EN 311)
 Type P3: for non load-bearing boards for use in humid conditions
 Type P5: for load-bearing boards for use in humid conditions
 Type P7: for heavy duty load-bearing boards for use in humid conditions
1 Internal bond 内部结合强度(EN 319)
2 Modulus of elasticity in bending (EN 310)抗弯弹性模数
3 Bending strength 抗弯强度 (EN 310)
4 Swelling in thickness 24 h 浸水厚度膨胀 (EN 317)
5 OPTION1: internal bond after cyclic test  &  swelling in thickness after cyclic test (EN 321)  
6 OPTION2: internal bond after boil test (EN 1087-1)
7 Marking 标记

Sample Size 样品数量 / 送样规格: 2 pcs (800 X1000mm)
Lead Time / TAT (Turn Around Time) 测试周期: 常规服务 Regular service 7-18 working days

Report Summary 报告摘要:

 

脚注信息
 ©2013-2024 TECERT ≥ TEST & CERTIFICATION 特色检测 - 检测认证搜索引擎 粤ICP备13066711号-2  beian 粤公网安备 44030702000495号  ❤️ 机构 ❤️
访问统计