Specifies strength and durability requirements for chairs of fixed height and either fixed or swivel bases, in order to provide purchasing authorities, specifiers, users, retailers and manufacturers with a uniform set of performance requirements that can form the basis of selection and evaluation criteria. This Standard is reproduced from ISO 7173:1989 with variations for Australia and New Zealand in an appendix. RECONFIRMATION NOTICE Technical Committee CS-088 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change. Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice. Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 31 May 2015. Approved for reconfirmation in New Zealand on behalf of the Standards Council of New Zealand on 21 May 2015. The following are represented on Technical Committee CS-088: Australian Chamber of Commerce and Industry Australian Furniture Association Australian Industry Group Business New Zealand Furniture Association of New Zealand Furniture Industry Association of Australia Furntech-AFRDI Human Factors & Ergonomics Society of Australia National Retail Association New Zealand Ergonomics Society Plastics New Zealand

Test Requirement 测试要求：

7.1 Seat static load test 座位静载测试
7.2 Back static load test  靠背静载测试
7.3 Arm and wing sideways static load test 扶手水平强度测试
7.4 Arm downwards static load test 扶手垂直强度测试
7.5 Seat fatigue test 座位疲劳测试
7.6 Back fatigue test 靠背疲劳测试
7.7 Leg forward static load test 椅脚向前强度测试
7.8 Leg sideways static load test  椅脚侧向强度测试
7.9 Diagonal base load test 基座对角强度测试
7.10 Seat impact test  座位冲击测试
7.11 Back impact test 靠背冲击测试
7.12 Arm impact test  扶手冲击测试
7.13 Drop test  跌落测试
7.14 Chair Swivelling Test  旋转测试

Sample Size 样品数量 / 送样规格: 2套
Lead Time / TAT (Turn Around Time) 测试周期: 常规服务 Regular service 7-9 working days

Report Summary 报告摘要: