1.1 This consumer safety specification covers all flame-producing consumer products commonly known as utility lighters (also known as grill lighters, fireplace lighters, lighting rods, or gas matches) and such similar devices as defined in 3.1.14. Matches are specifically excluded from this specification; flame-producing products intended for igniting cigars, pipes, and cigarettes are also specifically excluded from this safety specification and are covered in Consumer Safety Specification F400.

1.2 This specification establishes requirements for utility lighters to ensure a reasonable degree of safety for normal use and reasonably foreseeable misuse of such utility lighters by users.

1.3 Utility lighters, being flame-producing devices, as do all flame sources, present a potential hazard to the user. This specification cannot eliminate all hazards, but it is intended to minimize potential hazards of utility lighters to users.

1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.5 The following precautionary caveat pertains only to the test methods portion, Section 8, of this specification This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Test Item 测试名称: ASTM F2201 Standard Consumer Safety Specification for Utility Lighters 点火枪的安全使用规范

Test Requirements 测试要求：

4 General requirements 概括要求
4.1 Flame generation  火焰产生
4.2 Flame control 火焰控制
4.3 Flame height adjustment 火焰高度调节
4.4 Spitting or sputtering and flaring 火焰爆裂、溅射、闪火
4.5 Flame extinction  火焰熄灭
4.6 Volumetric displacement 燃料容量 www.tecert.com
5 Structural integrity requirements 结构要求
5.2 Drop test 跌落测试
5.3 Temperature test 抗高温测试
5.4 Burning test 燃烧测试
5.5 Continuous burn 连续燃烧
5.6 Cyclic burn 循环燃烧
5.7 External finish 表面做工
5.8 Compatibility 燃料适应性
5.9 Pressure test 内压测试
6 Refilling of utility lighters 可再充点火枪泄漏测试
7 Instruction and warning 说明书和警告标签
9 Product marking 产品标记

Sample Size 样品数量 / 送样规格:  55pcs
Lead Time / TAT (Turn Around Time) 测试周期: 常规服务 Regular service 30 working days

Report Summary 报告摘要: