标准编号 Standard/Code | 标准名称 Standard Title |
ANSI/BHMA A156.12 | Interconnected Locks |
This Standard establishes performance requirements for Interconnected Locks and includes operational, cycle, strength, material evaluation and security tests. Tests to evaluate decorative and protective finishes for these products are described in ANSI/BHMA A156.18 for Materials and Finishes, and are required to complete certification. Tests described in this Standard are performed under laboratory conditions. In actual usage, results vary because of installation, door and frame construction, maintenance and environmental conditions.
Test Requirement 测试要求:
9.1 Torque to retract dead bolt or torque to retract dead bolt and latch bolt by turn
9.2 Key torque
9.3 Torque to retract latch bolt by lever or knob
9.4 Force to latch door
9.5 Minimum projection of latch bolt when depressed to dead latched position
9.6 Minimum projection of dead latch plunger to deadlock latch bolt
9.7 Warped door test
10.1 Axial load test
10.2 Vertical load test
10.3 Torque test to locked lever or knob
10.4 Bolt strength test
10.5 Bolt end pressure test
11 Cycle test
12.1 Lever, knob, or thunbpiece impact test
12.2 Cylinder guard or escutcheon impact test
12.3 Cylinder guard or escutcheon tension test
12.4 Cylinder body or housing tension test
12.5 Lever or knob torque test
12.6 Dead bolt cylinder body torque test
12.7 Dead bolt cylinder guard or escutcheon torque test
12.8 Dead bolt cylinder face impact test
12.9 Dead bolt and deadlocking latch bolt impact test
12.10 Abusive locked lever test
12.11 vertical lever impact test
12.12 Cylinder in the lever face impact test
13.1 Salt spray test
13.2 Humidity test
13.3 Finish hardness test
13.4 Prespiration test
13.5 Ultra violet light and condensation test
Sample Size 样品数量 / 送样规格: 10pcs
Lead Time / TAT (Turn Around Time) 测试周期: 常规服务 Regular service 10 working days
Report Summary 报告摘要: