服务搜索 SEARCH
ASTM F1148
作者:TECERT    发布于:2014-06-15 19:31:02    检测认证一站式服务    收藏:Ctrl+D
摘要:ASTM F1148 Standard Consumer Safety Performance Specification for Home Playground Equipment 联系我们:info@tecert.com 安排检测 / Contact us for testing.

标准编号 Standard/Code 标准名称 Standard Title
ASTM F1148 Standard Consumer Safety Performance Specification for Home Playground Equipment

1.1 This consumer safety specification provides safety requirements for various types of home playground equipment intended for use by children aged from over 18 months through 10 years. It further provides such requirements for swings intended specifically for toddlers. Different age limits for various requirements are found in this specification. These limits reflect the nature of the hazards and the expected mental or physical ability, or both, of the child to cope with the hazards.

1.2 Home playground equipment is defined as any product in which the support structure remains stationary while the activity is taking place and is intended for a child to perform any of the following activities: climbing, swinging, sliding, rocking, spinning, crawling, or creeping, or combination thereof. Fitness equipment is specifically excluded unless attached to the play equipment. This specification is not intended to apply to juvenile care products such as, but not limited to, infant swings, playpens/enclosures, beds, or furniture (including outdoor furniture, such as picnic tables, cradle rockers, activity centers being used as walker substitutes, bouncers, jumpers, infant carriers, and products specifically designed for therapeutic use). This specification is not intended to apply to equipment to be used in places of public assembly such as schools, nurseries, day-care centers, and parks. Equipment intended to be in child-care centers in private homes is not exempt from the requirements of this specification. Such centers are defined as situations in which the child-care provider does not care for more than six children under the age of ten that are not residing in the household of the caregiver, and the total number of children under the age of ten does not exceed ten, including the caregiver's own children. Electrically operated constant air inflatable devices are exempted from the requirements of this specification. Free standing play houses are exempt from this standard where the intent is that the child is standing or seated with their feet on the ground with no climbing, sliding, or swinging activities.

1.3 Methods of identifying products that comply with this consumer safety specification are given. The illustrations of home playground equipment shown in Figs. A1.1-A1.4 are for informational purposes only and are not intended to limit or endorse certain types of playground equipment or equipment features. These illustrations are not intended to limit the variety or various combinations of equipment that are covered by this consumer safety specification.

1.4 The purpose of this specification is to reduce the likelihood of life-threatening or debilitating injuries.

1.5 If toy accessories or toy chests are attached to home playground equipment, they are applicable to this consumer safety specification and to any other applicable safety standards.

NOTE 1: See Annex A1 for figures referenced throughout this consumer safety performance specification.

1.6 General Measures, Tolerances, and Conversions:

1.7 This consumer safety performance specification includes the following sections:

1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM F1148

Test Item 测试名称: ASTM F1148 Standard Consumer Safety Performance Specification for Home Playground Equipment 家用场地器材的安全规范 

Test Requirement 测试要求:

Material: Ultraviolet (UV) degradation (for plastic)  / Corrosion assistance (for metal)  / hazardous amounts of substances (ASTM F963)  / Lead in Paint (16CFR 1303)

4 performance requirement
5.3 Seat Post and Seat
5.4 Handlebars
5.5 Pedals
6 Documentation

Gereral physical tests

4.1 General
4.1.1 Ultraviolet (UV)  / degradation (for plastic)  / Corrosion assistance (for metal)
4.1.2 hazardous amounts of substances (ASTM F963)
4.1.3 Lead in Paint (16CFR 1303)
4.1.4 Edges, Points, and Surfaces
4.1.5 Open Tubing
4.1.6 Pinch, Crush, and Shear Points
4.1.7 Acute Angles
4.1.8 Spacing Between Adjacent Swing Elements
4.1.9 Spacing Between Swing Elements and Stationary Frame Members
4.1.10 Hardware
4.1.11 Lock washers
4.1.12 Hooks
4.1.13 Guardrails and Protective Barriers
4.1.14 Head and Neck Entrapment
4.1.15 Holes and Slots

Swing tests

4.2 Swing
4.2.1 Hanger (180,000 cycles durability test)
4.2.2 Minimum Ground Clearance
4.2.3 Single-Occupancy Swings (Peak acceleration should not exceed 100g)
4.2.4 Multiple-Occupancy Swings
4.2.5 Pendulum See-Saws
4.2.6 Toddler Swings
4.2.6.1 Restraining System
4.2.6.2 Chains
4.2.6.3 Toddler Swing Stability
4.2.6.4 Toddler Swing Stability Test Setup
4.2.6.5 Toddler Swing Stability Test Method

Slide tests

4.3 Slides
4.3.1 Slide Requirements
4.3.2 Stability of Free-Standing Slides
4.3.3 Roller Slides

Physical tests

4.4 Swing Set Stability
4.5 Merry-Go-Rounds
4.6 Hand Gripping/Grasping Components
4.7 Structural Integrity
4.7.1 Rungs, Steps, and Horizontal Supporting Members
4.7.2 Top Support Bar
4.7.3 Individual Suspended Units
4.7.4 Slides
4.7.5 Rockers
4.7.6 Merry-Go-Rounds
4.7.7 Climbing Towers/Jungle Gyms
4.7.8 Platforms
4.8 Protrusions
4.9 Ropes
4.10.1 Rung Ladders, Stepladders and Stairways:
4.10.2 Handrails
5 Labeling
6 Instructions
7 General Requirements
8 Packaging
9 Identification of Conformance to This Standard

Sample Size 样品数量 / 送样规格:  3pcs
Lead Time / TAT (Turn Around Time) 测试周期: 常规服务 Regular service 12 working days

Report Summary 报告摘要:

 

脚注信息
 ©2013-2024 TECERT ≥ TEST & CERTIFICATION 特色检测 - 检测认证搜索引擎 粤ICP备13066711号-2  beian 粤公网安备 44030702000495号  ❤️ 机构 ❤️
访问统计