This Standard contains requirements for cabinet hardware and includes hinges, knobs, pulls, catches, shelf rests, standards and brackets, drawer slides, rotating shelves and track with guides for sliding panels. Included are performance tests covering operational, cyclical, strength, and finish criteria.

Test Requirement 测试要求：

Cabinet hinge test (Grades 1, 2, 3) 橱柜铰链测试

4.2 Hinge permanent set test 铰链承载变形测试
4.3 Hinge operating life test 铰链使用寿命测试
grade 1: 100000 cycles 级别1: 100000次
grade 2: 50000 cycles 级别2: 50000次
grade 3: 25000 cycles 级别3: 25000次

4.4 self closing hinge closing force test and over-opening test 自闭铰链自闭力测试和过开测试"

4.11 Drawer sliders tests (All grades) 抽屉滑轨测试 Standard duty drawer slide test (Grades 1, 2, 3)  标准型抽屉滑轨测试
4.11.4.1 Standard duty out-stop test 拉出限位测试
4.11.4.2 Standard duty cycle test 疲劳测试
grade 1: 50000 cycles 级别1: 50000 次
grade 2: 35000 cycles 级别2: 35000次
grade 3: 25000 cycles 级别3: 25000次

4.11.4.3 Standard duty static load test 静载测试 Heavy duty drawer slides tests (Grades 1HD)

4.16 Finish test
4.16.5.1 Salt spray test
4.16.5.2 Humidity

Sample Size 样品数量 / 送样规格: 14 pairs
Lead Time / TAT (Turn Around Time) 测试周期: 常规服务 Regular service 12 working days

Report Summary 报告摘要: