This test method covers the determination of the relative thermal shock resistance of commercial bottles and jars and is intended to apply to all types of glass containers that are required to withstand sudden changes in temperature in service. The test apparatus consists essentially of a basket for holding the glassware upright, a hot water tank, a cold water tank, and a timed means for immersing and transferring the basket from the hot to the cold bath. Indicating controllers or dial thermometers should be used to maintain the temperatures of the baths. Test procedures included in this specification include pass tests, progressive tests to a predetermined percent of breakage, total progressive tests, and high-level tests.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This test method covers the determination of the relative resistance of commercial glass containers (bottles and jars) to thermal shock and is intended to apply to all types of glass containers that are required to withstand sudden temperature changes (thermal shock) in service such as in washing, pasteurization, or hot pack processes, or in being transferred from a warm to a colder medium or vice versa.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Test Item 测试名称: ASTM C149 Thermal shock endurance 玻璃热冲击

Test Requirement 测试要求：

- Pass test 验证测试, 定点测试21度常温水，63度高温水，测试完看pass或者fail
- Progressive test 累进测试, 63度后，每隔5分钟升5.6度水温做到坏

Sample Size 样品数量 / 送样规格: 8pcs
Lead Time / TAT (Turn Around Time) 测试周期: 常规服务 Regular service 7-9 working days

Report Summary 报告摘要: