The requirements in ISO 8124-1:2018 apply to all toys, i.e. any product or material designed or clearly intended for use in play by children under 14 years of age. They are applicable to a toy as it is initially received by the consumer and, in addition, they apply after a toy is subjected to reasonably foreseeable conditions of normal use and abuse unless specifically noted otherwise.

The requirements of this document specify acceptable criteria for structural characteristics of toys, such as shape, size, contour, spacing (e.g. rattles, small parts, sharp points and edges, and hinge-line clearances) as well as acceptable criteria for properties peculiar to certain categories of toy (e.g. maximum kinetic energy values for non-resilient-tipped projectiles and minimum tip angles for certain ride-on toys).

ISO 8124-1:2018 specifies requirements and test methods for toys intended for use by children in various age groups from birth to 14 years. The requirements vary according to the age group for which a particular toy is intended. The requirements for a particular age group reflect the nature of the hazards and the expected mental and/or physical abilities of a child to cope with them.

ISO 8124-1:2018 also requires that appropriate warnings and/or instructions for use be given on certain toys or their packaging. Due to linguistic problems which may occur in different countries, the wording of these warnings and instructions is not specified but given as general information in Annex B. It should be noted that different legal requirements exist in many countries with regard to such marking.

ISO 8124-1:2018 does not purport to cover or include every conceivable potential hazard of a particular toy or toy category. Except for labelling requirements indicating the functional hazards and the age range for which the toy is intended, this document has no requirements for those characteristics of toys which represent an inherent and recognized hazard which is integral to the function of the toy.

EXAMPLE 1 An example of such a hazard is the sharp point necessary for the proper function of a needle. The needle is a hazard which is well understood by the purchaser of a toy sewing kit, and the functional sharp-point hazard is communicated to the user as part of the normal educational process of learning to sew as well as at the point of purchase by means of cautionary labelling on the product's packaging.

EXAMPLE 2 As a further example, a two-wheeled toy scooter has inherent and recognized hazards associated with its use (e.g. instability during use, especially while learning). The potential hazards associated with its structural characteristics (sharp edges, pinch hazards, etc.) will be minimized by compliance with the requirements of this document.

Test Requirement 测试要求：

正常使用
可预见的合理滥用
材料
小部件
某些特定玩具的形状、尺寸及强度
边缘
尖端
突出物
金属丝和杆件
用于包装或玩具中的塑料袋或塑料薄膜
绳索和弹性绳
折叠机构
孔、间隙和机械装置的可触及
弹簧
封闭式玩具
仿制防护玩具(头盔、帽子、护目镜)
弹射玩具
水上玩具
液体填充玩具
口动玩具
供全部或部分围绕颈部的绳索
雪橇和平底雪橇的牵引绳索
把手和方向盘上的下巴夹陷
一般要求
小部件测试
测试对某些玩具的形状和大小
小球测试
毛球测试
学前玩偶测试
部件或组件的可触及性测试
锐利边缘测试
锐利尖端测试
塑料薄膜厚度测试
金属丝和杆件
仿制防护玩具
动能和墙冲击试验
液体填充玩具的漏液测试
口动玩具耐久性
折叠或滑动机制
可洗的玩具
合理预见能力滥用测试

Sample Size 样品数量 / 送样规格: 3pcs
Lead Time / TAT (Turn Around Time) 测试周期: 常规服务 Regular service 7-9 working days

Report Summary 报告摘要: