This method determines the coefficient of friction between footwear and test floors under conditions simulating those experienced in the phases of a typical walking step when slip is most likely to occur.
The method is applicable to all types of footwear (except pram shoes), outsole units, heel top-pieces (top-lifts) and sheet soling materials, also to all types of test floors, including ice, turf and gravel and with or without surface contaminants, for example, liquid water, oil and grease.
The test conditions specified in the method may be inappropriate for footwear or test floors that force or induce wearers to walk in an atypical manner. Unless biomechanical studies indicate that the specified conditions are suitable for such footwear or test floors, results obtained using such footwear or test floors should be treated with caution.
Special purpose footwear or fittings containing spikes, metal studs or similar may be tested on appropriate surfaces but the method does not fully take into account the risk of tripping due to footwear/ground interlock.

Test Requirement 测试要求：

防滑性能

Sample Size 样品数量 / 送样规格: on request
Lead Time / TAT (Turn Around Time) 测试周期: 常规服务 Regular service 7-9 working days

Report Summary 报告摘要:

检测实验室 | TESTING LAB：

安瑞检测认证(广东)有限公司 (CNAS认可实验室)

联系人：陈小姐
电话：13420014231 （微信同号）
邮箱：orange.chen@annraytest.com
网址：www.annraytesting.com