服务搜索 SEARCH
TAPPI T 547
作者:TECERT    发布于:2022-12-31 18:37:27    检测认证一站式服务    收藏:Ctrl+D
摘要:TAPPI T 547 Air Permeance of Paper and Paperboard (Sheffield Method) 联系我们:info@tecert.com 安排测试 / Contact us for testing.
标准编号 Standard/Code 标准名称 Standard Title
TAPPI T 547 Air Permeance of Paper and Paperboard (Sheffield Method)

1.1 This method is used to measure the air permeance of a circular area of paper using a pressure differential of approximately 10 kPa (1.5 psig). In order to accommodate a wide range of paper products, rubber clamping plates are available for five commonly used orifice diameters: 9.5 mm (0.375 in.), 19.1 mm (0.75 in.), 38.1 mm (1.50 in.), 57.2 mm (2.25 in.), and 76.2 mm (3.00 in.). The air flow range for this method is 0 to 3348 mL/min (0 to 400 Sheffield units). Instruments are available with either variable area flowmeters (glass tubes with internal tapers and floats) or electronic mass flowmeters.
1.2 This method measures the air that passes through the test specimen, along with any possible leakage of air across the surface; therefore it is unsuitable for papers with rough surfaces which cannot be securely clamped so as to avoid significant surface leakage.
1.3 For other methods of measuring the air resistance of paper using a 28.6 mm (1.125 in.) orifice diameter, refer to TAPPI T 460 “Air Resistance of Paper (Gurley Method)” or a test that operates at a pressure differential of 1.22 kPa, or TAPPI T 536 “Resistance of Paper to Passage of Air (High Pressure Method)” for 3 kPa.

 

脚注信息
 ©2013-2024 TECERT ≥ TEST & CERTIFICATION 特色检测 - 检测认证搜索引擎 粤ICP备13066711号-2  beian 粤公网安备 44030702000495号  ❤️ 机构 ❤️
访问统计