服务搜索 SEARCH
ASTM F2417
作者:TECERT    发布于:2014-04-25 13:36:39    检测认证一站式服务    收藏:Ctrl+D
摘要:ASTM F2417 Standard Specification for Fire Safety for Candles 联系我们:info@tecert.com 安排检测 / Contact us for testing.
标准编号 Standard/Code 标准名称 Standard Title
ASTM F2417 Standard Specification for Fire Safety for Candles

1.1 This specification is intended to prescribe minimum safety requirements for candles and candle ensembles to provide a reasonable degree of safety for normal use with candles, thereby improving personal safety and reducing fires, deaths, and injuries.

1.2 This specification is not intended to replace other important safety practices that should be in place, such as adult supervision, close monitoring, fire detection, alarm or suppression systems, and use of candles away from combustible materials.

1.3 This specification is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions.

1.4 This standard is used to predict or provide a quantitative measure of the fire hazard from a specified set of fire conditions involving specific materials, products, or assemblies. This assessment does not necessarily predict the hazard of actual fires which involve conditions other than those assumed in the analysis.

1.5 Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests.

1.6 This specification states values in inch-pound units which are to be regarded as the standard. The values given in parenthesis are for information only.

1.7 This specification does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory requirements prior to use.

1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Test Item 测试名称:ASTM F2417 Standard specification for fire safety for candles 蜡烛的消防安全标准规范

Test Requirement 测试要求:

4.1 Safety Requirements for Flame Height  火焰高度的安全要求
4.2 Safety Requirements for Secondary Ignition  第二火源的安全要求
4.3 Safety Requirements for End of Useful Life 蜡烛燃尽的安全要求
4.4 Safety Requirements for Stability 稳定性的安全要求
Clause5.2 Candle Burning Performance Test
Clause5.3 Stability Test Method

Sample Size 样品数量 / 送样规格: 10 pcs, attached with products instructions
Lead Time / TAT (Turn Around Time) 测试周期: 常规服务 Regular service 9 working days

Report Summary 报告摘要:

 

脚注信息
 ©2013-2024 TECERT ≥ TEST & CERTIFICATION 特色检测 - 检测认证搜索引擎 粤ICP备13066711号-2  beian 粤公网安备 44030702000495号  ❤️ 机构 ❤️
访问统计