| 标准编号 Standard/Code | 标准名称 Standard Title |
| ISO 868 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) |
ISO 868 specifies a method for the determination of the indentation hardness of plastics and ebonite by means of durometers of two types: type A is used for softer materials and type D for harder materials. The method permits measurement either of the initial indentation or of the indentation after a specified period of time, or both.
This method is an empirical method intended primarily for control purposes. No simple relationship exists between indentation hardness determined by this method and any fundamental property of the material tested. For specification purposes, it is recommended that ISO 48, Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD), be used for the softer materials.
Test Requirement 测试要求：
塑料和硬质橡胶用硬度计测定压痕硬度 hardness of plastics and ebonite
Sample Size 样品数量 / 送样规格: 2pcs
Lead Time / TAT (Turn Around Time) 测试周期: 常规服务 Regular service 9 working days
Report Summary 报告摘要:
检测实验室 | TESTING LAB：
安瑞检测认证(广东)有限公司 (CNAS认可实验室)
联系人：陈小姐
电话：13420014231 （微信同号）
邮箱：orange.chen@annraytest.com
网址：www.annraytesting.com
